Guide to U.S. International Pavilion 2015

Transcription

THEOFFI
CI
ALGUI
DE
Par
i
sAi
rShow •J
une1
5-21
,
201
5 • Par
i
s
,
Fr
anc
e
FEATURI
NGACOMPLETELI
STI
NGOFALLU.
S.
EXHI
BI
TORS
THEU.
S.I
NTERNATI
ONALPAVI
LI
ON
I
SORGANI
ZED BY
Maritime Predator B
SAVING
LIVES
& Detect, track and identify most vessels including semi-submersible craft
& Illegal drug and immigration interdiction
& Performs long-endurance maritime surveillance and reconnaissance operations
& Wide-area surveillance with a 360° digital multi-mode maritime radar
& Costs a fraction of most comparable alternative systems
& In service with the U.S. Department of Homeland Security
Please Visit Us in Hall 3, Stand B132
w w w.ga-asi.com
©2015 General Atomics Aeronautical Systems, Inc.
Leading the Situational Awareness Revolution
Ask America First
Among the thousands of reasons to visit the 51st Paris Air Show this year,
there are more than 320 exhibitors representing the United States of
America at Le Bourget — 230-plus in the U.S. International Pavilion alone!
The U.S. is far and away the biggest international exhibitor at Paris
because — naturellement — it is the world’s biggest aerospace and
defense supplier, and Le Bourget is the industry’s biggest stage.
Whether you’re looking for commercial, military or space solutions, use
this Official Guide to U.S. Exhibitors to efficiently navigate the show and
find the American partners, products and services that can help you gain
a competitive edge in the global marketplace.
The Guide is easy to use.
• Start with the Le Bourget site map and U.S. International Pavilion floor
plan (pages 11–12) to understand the overall layout of the show.
• Review the Exhibitor Index to identify American companies exhibiting in
the U.S. International Pavilion in Hall 3 and “At-Large” on the general show
floor (pages 13–22).
• The center section of Exhibitor Profiles (pages 25–92) presents more
complete details about exhibitors in the U.S. International Pavilion.
• You can also cross-reference listings in the Product & Services section
on pages (95-102).
In addition to the Guide, Kallman Worldwide staff members are available
for your questions during show hours at the Information Desk outside of
the Meeting Point in the U.S. International Pavilion — Hall 3-Stand D133.
One Nation.
Infinite Possibilities.
THE U.S. INTERNATIONAL
PAVILION IS ORGANIZED BY
VISIT US IN HALL 3
AT THE PARIS AIR SHOW
www.kallman.com
You can also find U.S. Exhibitors online at www.parisairshow.com
TABLE OF CONTENTS
5-8 Welcome
11-12 Site Plan & U.S. International Pavilion
Floor Plan
13-19
20-22
25-92
95-102
U.S. International Pavilion Exhibitor Index
U.S. Exhibitors At-Large Index
U.S. International Pavilion Exhibitor Profiles
Product & Service Index
WELCOME
WELCOME
The White House
Washington, D.C.
A Message from
Barack Obama, President of the United States
Dear Visitor to the U.S. International Pavilion,
Greetings to U.S. exhibitors and attendees from around the world
participating in this prominent trade exhibition.
Selected by the U.S. Department of Commerce as part of the U.S.
Commercial Service’s Trade Fair Certification Program, this prominent
trade exhibition is an excellent venue for developing new business. U.S.
Commercial Service staff are here working diligently to connect U.S.
companies with international buyers—providing leads, trade counseling
and market research.
By opening new markets and promoting trade, we are creating new
sales channels for U.S. products and services. The business relationships
developed at this trade show will help increase economic growth and
create jobs throughout the United States.
I salute each of you for your commitment to excellence. Cooperation
within the international business community gives all of us confidence for
a bright economic future.
Best wishes for a successful event.
Barack H. Obama
President of the United States
THE U.S. INTERNATIONAL PAVILION
6
IS ORGANIZED BY KALLMAN WORLDWIDE, INC.
WELCOME
)//5ƫ+"ƫ0$!ƫ*%0! ƫ00!/ƫ+"ƫ)!.%
Paris, France
A Message from
Jane Hartley, U.S. Ambassador to France
Dear Honored Guest,
I am thrilled to welcome you to the U.S. International Pavilion at the Paris
Air Show. The exhibitors at the U.S. Pavilion demonstrate the strength and
dynamism of the American aerospace industry and present some truly
exciting new technologies. I invite you to visit the company booths and
learn what they have to offer.
The United States firmly believes in the importance of building sustainable
partnerships that promote prosperity through global trade. In fact,
cooperation within the international business community is a fundamental
pillar of our approach to promoting shared prosperity and a more
peaceful world. I encourage you to meet with U.S. exhibitors to learn
more about the innovation, quality and flexibility that are trademarks of
American industry. I am confident that the relationships formed at this
year’s Paris Air Show will foster economic growth and prosperity in both
our countries.
I wish you a successful visit to the U.S. Pavilion and to the 2015 Paris Air
Show!
Jane Hartley
U.S. Ambassador to France
7
IS CELEBRATING 20 YEARS AT THE PARIS AIR SHOW
WELCOME
Organizer of the U.S. International Pavilion
New Jersey, United States
A Message from
Tom Kallman, President & CEO
The United States of America is Open for Business at Le Bourget!
Bienvenue, and thank you for visiting U.S. exhibitors at the Paris Air Show
2015. As the organizer of the U.S. International Pavilion at Le Bourget, our
team at Kallman Worldwide is proud to help introduce you to America’s
leading aerospace and defense partners, equipment, products and services.
This is our 20th Anniversary at Paris and the 11th edition of the U.S.
*0!.*0%+*(ƫ2%(%+*ċƫ%*!ƫāĊĊĆČƫ3!Ě2!ƫ3+.'! ƫ$* ġ%*ġ$* ƫ3%0$ƫ0$!ƫ
show organizers, the U.S. Department of Commerce, the U.S. Department
of Defense, the Aerospace Industries Association and other leading trade
advocates to establish the Pavilion as an efficient, professional business
center for U.S. exporters to maximize their visibility at the show and their
time with you.
Whether you’re looking for commercial, military or space solutions,
America’s strengths are your advantage. From small- and medium-sized
companies to multi-national industry giants, doing business with our
exhibitors can help you gain a competitive edge in any market sector
anywhere in the world.
If you’re here for the Public Weekend, June 20-21, be sure to stop by
as we transform the Pavilion from a business hub into “Aérogare USA,”
an engaging experience intended to give visitors of all ages a taste of
American culture, our proud aviation heritage, and an appreciation for the
long-standing cooperation between the U.S. and France. In addition to
flight-inspired activities and displays, Aérogare USA will feature a special
appearance by NASA Astronaut and Apollo 15 Command Module pilot
(ƫ+. !*Čƫ* ƫƫ+))!)+.0%+*ƫ+"ƫ0$!ƫ"5!00!ƫ/ .%((!ƫ!)+.%(ƫ
honoring America’s first combat aviators.
On behalf of the hundreds of companies exhibiting with us here in Paris and
at aerospace and defense events around the world in 2015, thank you for
your attention and consideration of U.S. suppliers.
Tom Kallman
.!/% !*0ƫĒƫ
Kallman Worldwide, Inc.
4 North Street, Suite 800 Waldwick, NJ 07463 www.kallman.com
8
FLOOR PLANS
_______________
đƫ ƫƫƫƫ
đƫ ċċƫƫƫƫ
THANK YOU
FOR YOUR SUPPORT OF
Gate Awacs General Public
Business Chalets
Halls
Gate 53
Minibus & Chalets delivery
2
RN
Business Terminal
& Runway Access
Media Village
Static display - Aircrafts
Gate 52
Chalets access
Vehicle Access
RU
AY
NW
Air and Space Museum
Pedestrian Access
2
General Public Area
Show grounds limits
Gate East
First Aid Posts
Press Centre
Concorde Hall
Conference Centre
3
STATIC DISPLAY - AIRCRAFTS
Hall
Hall
2A
2C
Hall
9
1
P
1
Hall
Exit 5
2B
Hall
Gate O
6
Gate K
Gate L4
P
P
Hall
Hall
P
Gate L3
2
4
RN
4
8
Lille
SERVICES
P
5
6
A1
Gate L1
Subscribers and
visitors Parking Entrance
Exit 5
3
Hall
P
5
7
Gate M
Official Delegations
Paris
Gate L2
Halls delivery
RD50
Entry 5bis
Exit 4bis
1
Organisation Office - Exhibitor Services (Building O)
2
Police
3
Flying Display Office / Handling
4
Galilée Cafeteria
5
Handling Service
6
Build-up Office
7
Bus Station
8
Golf Cars
9
Service Providers Village
PARIS AIR SHOW SITE PLAN
PARIS AIR SHOW 2015 - SITE PLAN
U.S. PAVILION FLOOR PLAN - HALL 3
U.S. PAVILION FLOOR PLAN - HALL 3
Chalet Rows
Hangsterfer's
3-A105
Tactair Fluid
Controls
RGBSI
3-A111
3-A117
GyroState of
Stabilized
Systems Missouri, U.S.A.
3-A135
3-A127
Cincinnati
Thermal
Spray, Inc.
3-A123
AeroVironment, Inc.
Mattco
Forge Inc.
3-A139
Wichita, Kansas, USA Air Capital of the World
3-A159
3-A149
SNK
America,
Inc.
Transaero Inc.
ITT Corporation
3-A94
3-A82
MAKINO
3-A98
AAR International
Paradigm Precision
AMI Metals, Inc.
3-A118
3-A110
3-A132
Enterprise Florida
Precision Castparts Corp
3-A40
3-A80
Plymouth
Engineered
Shapes /
Plymouth
Tube
Company
Consolidated
Aerospace
Manufacturing
3-B81
Esco Fluid
Controls
3-C82
Haynes
International
3-B98
State of
Utah
3-C98
Marotta
Controls, Inc.
3-C106
3-C110
Business
Oregon
Woodward, Inc.
3-D98
3-D82
U.S.
New York State
Embassy Dept. of
U.S.
U.S.
Embassy
Economic
Commercial
Rec.
Office
Development
Service
1.25x2.25
1.75 x 2.25
3-D100
3-E107
3-E97
Connecticut Department of
Economic & Community
Development
3-D112
3-B145
General Atomics
Aeronautical Systems,
Inc.
PartsBase,
Inc.
3-C140
Forecast
International
3-C146
Fluid Forming
Technologies
3-CD146
3-D131
3-C157
3-C161
Flame
Enterprises
Incorporated
The State of
South
Carolina
3-C148
Perryman
Company
3-C158
CR
3-D132
3-C162
Renton
Coil
Spring
Co.
Denison
Industries
3-D148
3-D162
3-D158
3-D146
Virginia
EDP
3-D118
Acutec
Precision
Machining,
Inc.
3-B158
Ausco, Inc.
RIX
Industries
Circor
Aerospace
& Defense
3-E111
3-A162
Rogerson Kratos/
intheairnet
3-D145
U.S. Pavilion Exhibitors
Meeting Point
Kaman Aerospace
Group
Astronics
Corporation
Rotor &
Wing
Magazine
3-D116
Oklahoma
Department of
Commerce
IMC/IMCI
Aerospace
Group
3-B157
3-B148
Yarde
Metals
The
Timken
Company
Rolled Alloys
3-B147
3-B132
3-C131
3-C132
3-C128
3-AB148
IPT
Aeronautical
Systems, Inc.
Gulfstream
State of Illinois Special
DCEO
Missions
3-C118
Mississippi, USA
3-B131
The Gill
Corporation
3-B118
NBM
Metals
Panasonic
Avionics
Corp.
3-B117
3-B110
State of
Ohio
Composite
Engineering, Inc.
U.S. Department of Defense
Security Cooperation
3-B109
Universal Alloy
Corporation
3-B94
Marvin Group
AIP
Aerospace
3-B97
3-B93
North Carolina Economic
Development
Partnership of
N.C.
3-B82
Indiana Economic
Development
Corporation / Perdue
University
3-A148
3-D133
Aero Precision- A
Greenwich
AeroGroup Company
3-E131
Dynatech
International
SIFCO
Industries
, Inc.
3-DE145
NORDAM
3-E161
Washington State
Department of Commerce
3-E147
3-E145
Industrial
Metals
3-E162
PLD
W/C
W/C
Arkansas
Economic
Development
Commission
3-E106
Hall 4 & 5
Storage
Helicopter
Enstrom
Association
Helicopter
International (HAI)
Corp.
3-A101
3-A93
Bralco Metals
3-A81
FAA
CR3
HARCO
3-E118
Alabama USA
3-E128
Derco Aerospace,
Inc.
3-E140
Ducommun
Incorporated
3-E150
CR1
CR2
CR4
3-E158
U.S. Pavilion Conf. Room Suite
EXHIBITOR INDEX
_______________
đƫ ċċƫƫƫ
đƫ ċċƫƫƫƫƫġ
U.S. INTERNATIONAL PAVILION EXHIBITOR INDEX
EXHIBITOR INDEX
U.S. INTERNATIONAL PAVILION EXHIBITORS
BOOTH #
EXHIBITOR
3-B81
3-A118
CHALET NO. 4
3-C161
3-B118
3-E131
3-B81
CHALET NO. 2
3-C132
3-D132
3-B118
3-A80
3-A139
3-B118
3-B109
3-E107
3-A80
3-E128
3-E128
3V FASTENERS
AAR INTERNATIONAL
ACCURUS AEROSPACE CORPORATION
ACUTEC PRECISION MACHINING, INC.
AERO GEAR INC.
AERO PRECISION - A GREENWICH AEROGROUP COMPANY
AEROFIT LLC
AEROJET ROCKETDYNE
AERONAUTICAL SYSTEMS, INC.
AEROPROBE CORPORATION
AEROSPACE ALLOYS, INC.
AEROSPACE PRECISION, INC.
AEROVIRONMENT, INC.
AGC ACQUISITION
AIP AEROSPACE
AIRCRAFT LIGHTING INT’L
AIRGROUP DYNAMICS
ALABAMA DEPARTMENT OF COMMERCE
ALABAMA POWER ECONOMIC & COMMUNITY
DEVELOPMENT
ALABAMA USA
AMERICAN PRECISION ASSEMBLERS, INC.
AMERICAN STANDARD CIRCUITS
AMI METALS, INC.
ARKANSAS AEROPLEX
ARKANSAS ECONOMIC DEVELOPMENT COMMISSION
ASCENT AEROSPACE
ASTRO TOOL CORPORATION
ASTRONICS CORPORATION
AUSCO, INC.
AVIBANK MANUFACTURING, INC.
AVIONICA, INC.
AVIONICS MAGAZINE
B.L. HARBET INTERNATIONAL LLC
BALDWIN COUNTY EDA
BERTSCHE ENGINEERING CORPORATION
BIG COMMUNICATIONS
BILL AND HILLARY CLINTON NATIONAL AIRPORT
BIRMINGHAM AIRPORT AUTHORITY
BIRMINGHAM BUSINESS ALLIANCE
BRALCO METALS
BRISTOL INDUSTRIES
BUSINESS OREGON
C.E. MACHINE CO, INC.
CADENCE AEROSPACE
CALSPAN AEROSPACE
CAMBRIDGE VALLEY MACHINING, INC.
CET AEROSPACE
CHAMBER OF COMMERCE OF HUNTSVILLE/MADISON
COUNTY
3-E128
3-C128
3-C128
3-A148
3-E106
3-E106
3-B109
3-D112
3-B148
3-C157
3-A40
3-A80
3-D145
3-E128
3-E128
3-C128
3-E128
3-E106
3-E128
3-E128
3-A81
3-B81
3-D112
3-A159
CHALET NO. 4
3-E107
3-E107
3-D112
3-E128
14
EXHIBITOR
CHOCTAW DEFENSE
CINCINNATI THERMAL SPRAY, INC.
CIRCOR AEROSPACE & DEFENSE
CITY OF AUBURN
CITY OF OPELIKA
COBRA SYSTEMS, INC.
COMPOSITE ENGINEERING, INC.
COMPOSITES HORIZONS
CONNECTICUT DEPARTMENT OF ECONOMIC AND
COMMUNITY DEVELOPMENT
CONSOLIDATED AEROSPACE MANUFACTURING
COVINGTON COUNTY
COVINGTON ELECTRIC COOPERATIVE
CPI AERO
CR ONSRUD, INC.
CRISSAIR, INC.
CURTISS-WRIGHT
CYTEC INDUSTRIES, INC.
DEFENSE TECHNOLOGY EQUIPMENT INC.
DELTA INTERNATIONAL INC.
DENISON INDUSTRIES
DERCO AEROSPACE, INC.
DIRECT ALLOYS LLC
DISCOVERY AVIATION, INC.
DUCOMMUN INCORPORATED
DYNATECH INTERNATIONAL
EDAC TECHNOLOGIES
ELECTRONIC HARDWARE CORP EHC KNOBS
ELMORE COUNTY ECONOMIC DEVELOPMENT AUTHORITY
EMBRY-RIDDLE AERONAUTICAL UNIVERSITY
EMINENCE MANUFACTURING, INC.
ENSTROM HELICOPTER CORPORATION
ENTERPRISE FLORIDA
ESCO FLUID CONTROLS
ESSEX INDUSTRIES
FIRST AVIATION SERVICES INC.
FLAME ENTERPRISES INCORPORATED
FLANAGAN INDUSTRIES
FLG TECHNICS
FLORIDA AERONAUTICS, INC.
FLOW AEROSPACE
FLUID FORMING TECHNOLOGIES
FORECAST INTERNATIONAL
FRANKFURT-SHORT-BRUZA ASSOCIATES, P.C. (FSB)
FUTURE METALS LLC
GALLEY SUPPORT INNOVATIONS
GALLOWAY, WETTERNARK, EVEREST, RUTENS & GAILLARD, LLP
GENERAL ATOMICS AERONAUTICAL SYSTEMS, INC.
GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS
3-B81
3-E128
3-E128
CHALET NO. 4
3-B94
3-B82
CHALET NO. 4
CHALET NO. 4
3-D133
3-A80
3-D158
3-E140
3-E107
3-A80
3-E150
3-E161
3-B118
3-E107
3-E128
3-A80
3-A135
3-A93
3-A80
3-B82
3-A135
3-B118
3-C148
3-B118
3-A80
3-A80
3-B109
3-CD146
3-C146
3-E111
3-A80
3-E106
3-E128
3-B132
3-D132
15
EXHIBITOR INDEX
BOOTH #
3-E111
3-A123
3-D146
3-E128
3-E128
3-C128
3-D98
3-B109
3-B118
EXHIBITOR INDEX
BOOTH #
EXHIBITOR
3-E147
3-D132
3-A159
3-B94
3-C118
3-A127
3-A159
3-E107
3-A105
3-E118
3-A159
3-A80
3-B110
3-A101
CHALET NO. 4
3-A80
3-E128
3-D132
3-A162
3-A159
3-C98
3-C128
3-B97
GIVON USA, INC.
GMS CORPORATION
GREATER WICHITA ECONOMIC DEVELOPMENT COALITION
GREENSBORO ECONOMIC DEVELOPMENT ALLIANCE
GULFSTREAM AEROSPACE CORPORATION
GYRO-STABILIZED SYSTEMS
H.M. DUNN AEROSPACE
HADCO METAL TRADING, LLC
HANGSTERFER’S
HARCO
HARLOW AEROSTRUCTURES LLC
HASKELL
HAYNES INTERNATIONAL, INC.
HELICOPTER ASSOCIATION INTERNATIONAL
HEXADYNE CORPORATION
HONEYCOMB COMPANY OF AMERICA, INC.
HUNTSVILLE MADISON COUNTY AIRPORT
ICG (INTERNATIONAL COMMUNICATIONS GROUP, INC.)
IMC/IMCI AEROSPACE GROUP
IMPRESA AEROSPACE
IMSAR LLC
IMT FORGE GROUP, CLIFFORD-JACOBS FORGING
INDIANA ECONOMIC DEVELOPMENT CORPORATION /
PURDUE UNIVERSITY
INDUSTRIAL MACHINE TOOL, INC.
INDUSTRIAL METALS INTERNATIONAL LTD.
INGENIUM TECHNOLOGIES
INGERSOLL MACHINE TOOLS, INC.
INTEGRATED PROCUREMENT TECHNOLOGIES (IPT)
IPSEN INTERNATIONAL GMBH
ITT AEROSPACE CONTROLS
ITT CORPORATION
ITT ENIDINE
ITT INTERCONNECT SOLUTIONS - ITT CANNON
JANEWAY MACHINE, INC. / JMI INTERNATIONAL LLC
JBT CORPORATION
JET INFORMATION SERVICES, INC.
KADDAS ENTERPRISES INC.
KALLMAN WORLDWIDE, INC.
KAMAN AEROSPACE GROUP
KBR BUILDING GROUP
LMI AEROSPACE INC.
LOCKHEED MARTIN
LOOS & CO., INC.
M&M MANUFACTURING, INC.
MAC AEROSPACE CORP.
MAKINO
MAKINO
3-E147
3-E162
3-C128
3-C128
3-B147
3-C128
3-A98
3-A98
3-A98
3-A98
3-E111
3-A80
3-E107
3-C98
3-D133
CHALET NO. 4,
3-D118
3-B94
CHALET NO. 4
CHALET NO. 316
3-A80
3-E111
3-D132
CHALET NO. 8
3-A110
16
EXPORT WITH PURPOSE.
EXHIBIT WITH CONFIDENCE.
!/!.2!ƫ5+1.ƫ,(!ƫ%*ƫ+1.ƫ/,!ƫ0ƫ0$!ƫ3+.( Ě/ƫ,.!)%!.ƫ!.+/,!Čƫ !"!*/!Čƫ
/!1.%05ƫ* ƫ).%0%)!ƫ!2!*0/ċƫ
AEROSPACE
& DEFENSE
F-AIR COLOMBIA
1(5ƫĊġāĂČƫĂĀāĆƫđƫ%+*!#.+Čƫ+(+)%
FIDAE
.$ƫĂĊġ,.%(ƫăČƫĂĀāćƫđƫ*0%#+Čƫ$%(!
MAKS
1#1/0ƫĂĆġăĀČƫĂĀāĆƫđƫ+/+3Čƫ1//%
ILA BERLIN AIRSHOW
5ƫăāġ
1*!ƫĆČƫĂĀāćƫđƫ!.(%*Čƫ!.)*5
MSPO
!,0!)!.ƫāġąČƫĂĀāĆƫđƫ%!(!Čƫ+(*
EUROSATORY
1*!ƫāăġāĈČƫĂĀāćƫđƫ.%/Čƫ.*!ƫ
CHINA HELICOPTER
!,0!)!.ƫĊġāăČƫĂĀāĆƫđƫ%*&%*Čƫ$%*
FARNBOROUGH AIRSHOW
1(5ƫāāġāĆČƫĂĀāćƫđƫ.*+.+1#$Čƫ*#(* ƫ
SEOUL ADEX
0+!.ƫĂĀġĂĆČƫĂĀāĆƫđƫ!+1(Čƫ+.!
LAND FORCES
1#1/0ƫĂăġĂĆČƫĂĀāćƫđƫ1/0.(%
DEFENSE & SECURITY
+2!)!.ƫĂġĆČƫĂĀāĆƫđƫ*#'+'Čƫ$%(*
AFRICA AEROSPACE & DEFENSE
!,0ċƫĂĈġ0ċƫāČƫĂĀāćƫđƫ!*01.%+*Čƫċƫ".%
DUBAI AIRSHOW
+2!)!.ƫĉġāĂČƫĂĀāĆƫđƫ1%Čƫ
JAPAN AEROSPACE
0+!.ƫāĂġāĆČƫĂĀāćƫđƫ+'5+Čƫ
,*
EXPODEFENSA
+2ċƫăĀġ!ċƫĂČƫĂĀāĆƫđƫ+#+0Čƫ+(+)%
AIRSHOW CHINA
+2!)!.ƫāġćČƫĂĀāćƫđƫ$1$%Čƫ$%*
DEFEXPO
!.1.5ƫĂĀāćƫđƫ!3ƫ!($%Čƫ* %
MEBAA
!!)!.ƫćġĉČƫĂĀāćƫđƫ1%Čƫ
SINGAPORE AIRSHOW
!.1.5ƫāćġĂāČƫĂĀāćƫđƫ%*#,+.!
ASIA PACIFIC HOMELAND SECURITY
0+!.ƫĂĈġăĀČƫĂĀāĆƫđƫ%*#,+.!ƫ
MILIPOL PARIS
+2!)!.ƫāĈġĂĀČƫĂĀāĆƫđƫ.%/Čƫ.*!
MILIPOL QATAR
0+!.ƫĂĀāćƫđƫ+$Čƫ0.
SECURITY
PACIFIC
0+!.ƫćġĉČƫĂĀāĆƫđƫ5 *!5Čƫ1/0.(%
DIMDEX
.$ƫĂĊġăāČƫĂĀāćƫđƫ+$Čƫ0.
MARITIME
See a Kallman Representative in the U.S. International Pavilion Meeting
Point in Hall 3 - Stand D133.
$!ƫċċƫ*0!.*0%+*(ƫ2%(%+*ƫ%/ƫ+.#*%6! ƫ5ƫ
333ċ'(()*ċ+)
EXHIBITOR INDEX
BOOTH #
3-C110
3-C82
3-A149
3-C128
3-C128
3-B145
3-E128
3-E128
3-B94
3-E106
3-E147
3-AB148
3-B94
3-B157
3-E107
3-C106
3-E145
3-B94
3-B94
3-E106
3-E147
3-E111
3-E147
3-A80
3-B131
3-A132
3-A127
3-C140
3-A40
3-A40
3-B118
3-C162
3-E147
3-E147
3-E107
3-B93
3-E128
3-C106
3-A40
3-B118
3-B82
3-B97
3-B81
3-A111
3-E128
3-A80
3-C106
EXHIBITOR
MAROTTA CONTROLS, INC.
MARVIN GROUP
MATTCO FORGE INC.
MET PLASTICS, INC.
MIDWEST AERO SUPPORT, INC.
MISSISSIPPI, USA
MOBILE AIRPORT AUTHORITY
MOBILE COUNTY COMMISSION
MONROE-UNION COUNTY ECONOMIC DEVELOPMENT
NANOMECH INC
NATIONAL PRECISION BEARING GROUP OF MECHATRONICS
NBM METALS
NCEAST ALLIANCE
NEONICKEL
NEW YORK STATE DEPARTMENT OF ECONOMIC
DEVELOPMENT
NMG AEROSPACE
NORDAM
NORTH CAROLINA - ECONOMIC DEVELOPMENT PARTNERSHIP
OF N.C.
NORTH STATE AVIATION
NORTHWEST ARKANSAS REGIONAL AIRPORT
NOVA-TECH ENGINEERING
OKLAHOMA DEPARTMENT OF COMMERCE
ORION INDUSTRIES
PAN AMERICAN TOOL CORPORATION
PANASONIC AVIONICS CORPORATION
PARADIGM PRECISION
PARADIGM SRP
PARTSBASE, INC.
PCC AIRFRAME PRODUCTS
PCC STRUCTURALS, INC.
PCX AEROSTRUCTURES
PERRYMAN COMPANY
PIONEER HUMAN SERVICES
PIONEER INDUSTRIES
PLATTSBURGH INTERNATIONAL AIRPORT
PLYMOUTH ENGINEERED SHAPES / PLYMOUTH TUBE CO.
POWERSOUTH ENERGY COOPERATIVE
PRECISION ALLOY SERVICES, INC.
PRECISION CASTPARTS CORP.
PRECISION SENSORS DIVISION
PTI TECHNOLOGIES INC.
PURDUE UNIVERSITY - PURDUE RESEARCH FOUNDATION
QRP, INC.
RAPID GLOBAL BUSINESS SOLUTIONS INC [RGBSI]
REGIONS FINANCIAL CORPORATION
RELLI TECHNOLOGY, INC.
RENEGADE MATERIALS CORPORATION / MAVERICK CORP.
18
EXHIBITOR
3-B118
3-D162
3-E111
3-D148
3-C128
3-B158
3-B157
3-D145
3-C106
3-E147
3-DE145
3-E147
3-A94
3-E128
3-C128
3-A135
3-C106
3-C98
3-A135
3-C98
3-C106
3-A117
3-A80
CHALET NO. 4
3-E128
3-C131
3-A80
3-C106
3-C158
3-D116
3-E128
3-A82
3-C106
3-E128
3-B117
3-E97
3-B98
3-E107
3-C106
3-E128
3-B82
3-D132
3-B81
3-E147
3-B94
3-B118
3-A159
3-D82
3-E106
3-D131
RENO MACHINE COMPANY
RENTON COIL SPRING CO.
RISE MANUFACTURING
RIX INDUSTRIES
ROCKFORD AREA ECONOMIC DEVELOPMENT AGENCY
ROGERSON KRATOS/INTHEAIRNET
ROLLED ALLOYS
ROTOR & WING MAGAZINE
SARICA MANUFACTURING COMPANY
SEACAST, INC.
SIFCO INDUSTRIES INC.
SILICON FOREST ELECTRONICS
SNK AMERICA, INC.
SOUTHEAST ALABAMA GAS DISTRICT
STATE OF ILLINOIS - DCEO
STATE OF MISSOURI
STATE OF OHIO
STATE OF UTAH
STAUDER TECHNOLOGIES
SYBERJET AIRCRAFT
SYSCOM ADVANCED MATERIALS, INC.
TACTAIR FLUID CONTROLS
TEAM VOLUSIA EDC
TECT AEROSPACE
TENNESSEE VALLEY AUTHORITY
THE GILL CORPORATION
THE MIAMI-DADE BEACON COUNCIL
THE OHIO STATE UNIVERSITY
THE STATE OF SOUTH CAROLINA
THE TIMKEN COMPANY
THE UNIVERSITY OF ALABAMA
TRANSAERO INC.
TRICOR ALLOYS
TUSCALOOSA COUNTY IDA
U.S. DEPARTMENT OF DEFENSE SECURITY COOPERATION
U.S. EMBASSY - U.S. COMMERCIAL SERVICE
UNIVERSAL ALLOY CORPORATION
UNIVERSAL STAINLESS
UNIVERSITY OF CINCINNATI
UNIVERSITY OF SOUTH ALABAMA
VACCO INDUSTRIES
VIRGINIA ECONOMIC DEVELOPMENT PARTNERSHIP
VOSS INDUSTRIES
WASHINGTON STATE DEPARTMENT OF COMMERCE
WESTSTAR PRECISION
WHITCRAFT LLC
WICHITA, KANSAS USA - AIR CAPITAL OF THE WORLD
WOODWARD, INC
WORLD TRADE CENTER ARKANSAS
YARDE METALS
19
EXHIBITOR INDEX
BOOTH #
U.S. EXHIBITOR INDEX AT-LARGE
EXHIBITOR INDEX
U.S. EXHIBITORS AT-LARGE
BOOTH #
EXHIBITOR
5-C248
CHALET NO. 503
CHALET NO. 347
5-F266
3-A39
CHALET NO. 49, 5-F210
5-E230
3-C1
CHALET NO. 319
2B-B32
2B-F127
3-E20
CHALET NO. 301, 5-B210
EXT-B6
6-A13
ADEPT FASTENERS
AEROSPACE INDUSTRIES ASSOCIATION
AIR INDUSTRIES GROUP
AIRCOM
ALBANY ENGINEERED COMPOSITES
ALCOA AEROSPACE
ALLFAST FASTENING SYSTEMS
ALTA DEVICES
AMETEK AEROSPACE & DEFENSE
AMSAFE
APP (ALUMINIUM PRECISION PRODUCTS INC.)
ASTRONAUTICS CORPORATION OF AMERICA
ATI
AURORA FLIGHT SCIENCES
AV-DEC (AVIATION DEVICES AND ELECTRONIC
COMPONENTS LLC)
AVIALL
AVIATION INTERNATIONAL NEWS
AVIATION WEEK
BARNES AEROSPACE
BELL HELICOPTER
BLUESHIFT
BOEING COMPANY
CABLECRAFT
CARLISLE INTERCONNECT TECHNOLOGIES
CARPENTER TECHNOLOGY CORPORATION
CCS (CUSTOM CONTROL SENSORS)
CELESTE INDUSTRIES CORPORATION
CHROMALLOY
CRANE AEROSPACE & ELECTRONICS
CUBIC DEFENSE APPLICATIONS
DEFENSE NEWS
DYNAMET, INC.
ELEMENT MATERIALS TECHNOLOGY
ENGINE ALLIANCE, LLC
ESTERLINE
EXELIS
FLIR SYSTEMS
GE AVIATION
GGB BEARING TECHNOLOGY
GW LISK COMPANY INC.
HAAS AUTOMATION
HARRIS CORPORATION
HITCHINER MANUFACTURING CO. INC.
HONEYWELL INTERNATIONAL
HYDRA ELECTRIC
INTERNATIONAL TITANIUM ASSOCIATION
IOMAX
ISTAT - INTERNATIONAL SOCIETY OF TRANSPORT
JONATHAN ENGINEERED SOLUTIONS
JUDD WIRE, INC.
KAISER ALUMINUM
4-B207
CHALET NO. 52
CHALET NO. 44
5-D248
EXT-A2
2B-F112
CHALET NO. 321/324
2B-B32
3-D28
5-E232
2B-B32
3-B30
3-B40
4-A178
6-A18
V-C9
5-E232
6-B54
5-D232
5-C250
CHALET NO. 28
CHALET NO. 373
CHALET NO.142
5-F232
3-C29
5-D266
CHALET NO. 28
3-A18
CHALET NO. 106
5-C249
3-BC2
CHALET NO. 124
CHALET NO. 397
2B-B32
4-C42
20
ASK
AMERICA
FIRST.
Looking for commercial,
military or space solutions?
The U.S. International Pavilion is open for
business, with more than 230 exhibitors
representing the industry’s most innovative
partners, products and services — including
our “HOT 100” listed companies. Visit
us now in Hall 3 at Le Bourget, and learn
how American suppliers can help you gain
a competitive advantage in any market
sector, anywhere in the world.
One Nation.
Infinite Possibilities.
THE U.S. INTERNATIONAL
PAVILION IS ORGANIZED BY
VISIT US IN HALL 3
AT THE PARIS AIR SHOW
www.kallman.com
You can also find U.S. exhibitors online at www.parisairshow.com
U.S. EXHIBITOR INDEX AT-LARGE
EXHIBITOR INDEX
U.S. EXHIBITORS AT-LARGE
BOOTH #
2B-B66
3-A20
4-F193
4-B207
5-E254
5-C232
4-D38
CHALET NO. 306, EXT-C2
2B-B32
6-B4
5-E230
5-E230
3-B30
2B-B32
5-E230
3-B18
4-D104
CHALET NO. 102
5-C210
5-F248
6-A12
2B-B32
EXT-C2
2B-C78
4-B207
2B-B32
CHALET NO. 296, EXT-B10
CHALET NO. 34
3-A59
3-B1
2B-E138
2B-D172
CHALET NO. 34
EXT-C2
CHALET NO. 383, 3-A8
2B-C78
5-F232
CHALET NO. 315
EXT-A4
5-E230
CHALET NO. 17, 4-E208
4-B207
6-A35
4-F194
6-C40
4-F120
2C-D316
2B-B32
5-B256
EXHIBITOR
KAVLICO CORPORATION
KELLSTROM DEFENSE
KELLSTROM MATERIALS
KELL-STROM TOOL COMPANY, INC.
KGS ELECTRONICS INC.
KLX AEROSPACE SOLUTIONS
KULITE
L-3 COMMUNICATIONS
LEFIELL MANUFACTURING
LOCKHEED MARTIN CORPORATION
LYTRON INC.
MAC FASTENERS, INC.
MARTINIC ENGINEERING
MARYLAND
MC GILL (GROUPE EMERSON INDUSTRIAL AUTOMATION)
MONOGRAM AEROSPACE
MOOG INC.
NEW HAMPSHIRE BALL BEARINGS, INC.
NYLOK LLC
ORBITAL ATK, INC.
PARKER AEROSPACE
PAS TECHNOLOGIES
PLEXUS CORP.
PNEUDRAULICS
PRATT & WHITNEY
PROGRESSIVE ALLOY
PUROLATOR-FACET, INC
QED/INC.
RAYTHEON COMPANY
RELIANCE STEEL AND ALUMINUM CO.
S3 INTERNATIONAL
SAE INTERNATIONAL
SAINT-GOBAIN COMPOSITE AEROSPACE
SENIOR AEROSPACE
SERVICE STEEL AEROSPACE
SIKORSKY AIRCRAFT
SPIRIT AEROSYSTEMS
SUNSHINE METALS
TECHNETICS GROUP
TELEPHONICS CORPORATION
TEXTRON AVIATION
TRIMAS AEROSPACE
TRIUMPH GROUP
TRONAIR
TURBOCAM INTERNATIONAL
UNISON INDUSTRIES
UNITED TECHNOLOGIES CORPORATION
VALCOR ENGINEERING CORPORATION
VANTAGE IC
WEBER METALS INC.
WHELEN
WIREMASTERS INC.
22
Illustration shows
conceptual data only
Aviation data, news
and analysis you need most
Flightglobal Dashboard is a smart and easy-to-use platform connecting
up-to-the-minute aviation industry news with company, fleet information and
schedules information.
How can the Dashboard help you?
# Stay up to date with the latest aviation industry announcements and trends
# Access individual aviation company profiles
# Access individual aircraft data
# Research the world schedule
# Access to an interactive route mapping and timetable platform
Find out more at Flightglobal.com/dashboard
________________
EXHIBITOR PROFILES
EXHIBITOR PROFILES
3V FASTENERS
320 Reed Circle
Corona, CA 92879 USA
www.3vfasteners.com
BOOTH # 3-B81
AAR INTERNATIONAL
41 Avenue Edouard Vaillant
Boulogne-Billancourt, 92100 France
email: [email protected]
www.aarcorp.com
BOOTH # 3-A118
PRODUCTS AND SERVICES: SUPPLY CHAIN MANAGEMENT, MAINTENANCE/
OVERHAUL, AIRCRAFT OVERHAUL & REPAIR STATIONS
ACCURUS AEROSPACE CORPORATION
222 W. Las Colinas Boulevard, Suite 555E
Irving, TX 75039 USA
www.accurusaero.com
CHALET NO. 4
PRODUCTS AND SERVICES: MACHINING, SUPPLY CHAIN MANAGEMENT, SURFACE
FINISHING/TREATMENT
Accurus Aerospace Corporation is a leading Tier II supplier of highly engineered machined
parts, kits and assemblies and processing services to the global aerospace and defense
industry focused on the highest value aircraft platforms. Accurus was formed in November
2013 to acquire the business of Precise Machining & Manufacturing, acquired McCann
Aerospace Machining in March 2014 and possesses multiple highly complementary
capabilities that allow Accurus to deliver its products to its customers with optimal cost,
quality and delivery.
ACUTEC PRECISION MACHINING, INC.
13555 Broadway Drive
Meadville, PA 16335 USA
www.acutecprecision.com
BOOTH # 3-C161
PRODUCTS AND SERVICES: PRECISION MACHINING/ENGINEERING, EDM, NDT (NON
DESTRUCTIVE TESTING)
Acutec is your complete aerospace assembly and lean manufacturing solution source for
engine, vibration dampening, fuel and air control, rotor, landing gear, hydraulic, avionic, &
actuation systems; AS-9100C certified with over 220 CNCs (18 5-axis mills), 470
employees, and 300,000 square feet of manufacturing space in two low-cost US regions,
specializing in complex turned & milled parts, tube bending, grinding, roll-threading,
bearing staking, & painting. NADCAP certified for EDM, NDT, passivation, dry film lube,
welding, brazing & X-ray. Woman owned small business.
AERO GEAR INC.
1050 Day Hill Road
Windsor, CT 06095 USA
www.aerogear.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: GEARS & GEAR BOXES/GEAR CUTTING
26
BOOTH # 3-E131
PRODUCTS AND SERVICES: DISTRIBUTION, ENGINE COMPONENTS/CONTROLS,
AIRCRAFT LIGHTING
Aero Precision, a 20-year leader in the supply of OEM systems and aftermarket aircraft
spares, repairs, upgrades, modifications and maintenance program management, provides
world-class aftermarket. Support for military aircraft operators in over 60 countries.
Headquartered in CA, Aero Precision is an AS/EN/JISQ9120:2009 - Rev. A and ISO
9001:2008- certified stocking distributor. Focus platforms include fighters, transport and
rotary aircraft; Factory New product support lines include CSDs/ADGs, generators, EPUs,
lighting, pumps, valves, canopies and much more.
AEROFIT LLC
1425 South Acacia Avenue
Fullerton, CA 92831 USA
www.aerofit.com
BOOTH # 3-B81
PRODUCTS AND SERVICES: HYDRAULIC COMPONENTS/SYSTEMS/TOOLS/TESTING,
PRECISION MACHINING/ENGINEERING, TESTING & INSPECTION/TEST FACILITIES/TEST
EQUIPMENT
Aerofit, LLC. designs and manufactures high and low pressure fluid fittings and fitting
systems for aerospace and other critical industries. Our capabilities span the entire
business and production cycle, from feasibility studies to qualification and functional
testing. We are both a QPL and a QML approved supplier. In an industry driven by
engineering excellence and precision production, Aerofit has earned an outstanding
reputation for innovative engineering, quality products and systems, modern production
capabilities and on-time performance.
AEROJET ROCKETDYNE
1300 Wilson Blvd, Suite 1000
Arlington, VA 22209-2302 USA
www.aerojet.com
CHALET NO. 2
Aerojet Rocketdyne is a world-recognized aerospace and defense leader providing
propulsion and energetics to the space, missile defense, strategic, tactical missile, and
armaments areas in support of domestic and international markets. Additional information
about Aerojet Rocketdyne is available online at www.Rocket.com.
27
EXHIBITOR PROFILES
AERO PRECISION A GREENWICH AEROGROUP COMPANY
201 Lindbergh Avenue
Livermore, CA 94551 USA
www.aeroprecision.com
EXHIBITOR PROFILES
AERONAUTICAL SYSTEMS, INC.
43671 Trade Center Place, Suite 100
Sterling, VA 20166 USA
www.aeronautical.com
BOOTH # 3-C132
PRODUCTS AND SERVICES: ENGINEERING SUPPORT, REPAIR/REPAIR & OVERHAUL,
COMPONENT REPAIR/OVERHAUL
Aeronautical Systems, Incorporated (ASI) offers comprehensive mission readiness
solutions for military fleets worldwide including component and systems repair and
overhaul, maintenance, aeronautical engineering, supply chain management, replacement
parts and logistical support. An ISO9001 and AS9100C certified company, ASI has over 25
years of experience in providing timely cost effective results. Our partnerships with repair
service providers, manufacturers and US Military Depots allow us to provide outstanding
breadth of capabilities and uncompromising quality.
AEROPROBE CORPORATION
200 Technology Drive
Christiansburg, VA 24073 USA
www.aeroprobe.com
BOOTH # 3-D132
PRODUCTS AND SERVICES: AEROSPACE SERVICES, AIRFLOW MEASURING TEST
EQUIPMENT, CALIBRATION EQUIPMENT/SERVICES
Aeroprobe Corporation is a global producer of air data measurement tools to aerospace,
automotive, turbomachinery, and wind turbine & tunnel industries around the world. Its
main line of products consists of multi-hole probes and air data systems that measure flow
velocity for aerodynamic and hydrodynamic research and engineering. Additionally,
Aeroprobe’s research division has developed a cutting-edge additive friction stir process.
This flexible, additive process can be used to join, coat and additively manufacture similar
and dissimilar metals. For more information, visit aeroprobe.com.
AEROSPACE ALLOYS, INC.
11 Britton Drive
Bloomfield, CT 06002 USA
www.aalloys.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: MATERIALS & COMPONENTS, SPECIALTY METALS, HEAT
EXCHANGERS
A Specialized Metal Service Center that supplies the Aerospace, Power Generation and
Defense industries. Our materials include nickel based alloys,stainless steel, titanium and
aluminum as well as component parts made from these alloys that include heat exchanger
components, shims and custom small extrusions. Our value added services include abrasive
water jet cutting, milling, turning, quality inspection and as always our on-time delivery.
We are your one stop solution for all your material and component needs.
28
BOOTH # 3-A80
PRODUCTS AND SERVICES: COMPONENT REPAIR/OVERHAUL, HYDRAULIC
COMPONENTS/SYSTEMS/TOOLS/TESTING, ACTUATORS/ACTUATION SYSTEMS
Aerospace Precision is a leading, worldwide authorized OEM repair and maufacturing
facility, offering FAA and EASA certification. We provide component repair and overhaul
services for accessories, hydraulics, electro-mechanical, and pneumatic systems, including
wheels and brakes for Boeing, Airbus, Embraer, Bombardier and regional aircraft. Our 45
years of expertise extends to manufacturing aircraft tools and ground support equipment
for all aircraft and engine types under the name of Luchner Tool Engineering. We are Light
Years Ahead.
BOOTH # 3-A139
AEROVIRONMENT, INC.
900 Enchanted Way
Simi Valley, CA 93065 USA
www.avinc.com
PRODUCTS AND SERVICES: UNMANNED AERIAL VEHICLES (UAV), AIRCRAFT/
MANUFACTURING, RECONNAISSANCE/SURVEILLANCE SYSTEMS
AeroVironment is a technology solutions provider that designs, develops, produces,
operates and supports an advanced portfolio of Unmanned Aircraft Systems (UAS) and
electric transportation solutions. AeroVironment is a world leader in the design and
manufacturing of small UAS solutions for both military and civilian applications.
AeroVironment’s small UAS are the standard issued systems for US forces as well as
international customers. Over 25,000 unmanned aircraft have been delivered. Come visit us
in the US Pavilion Booth #3-A139 or at www.avinc.com.
AGC ACQUISITION
106 Evansville Avenue
Meriden, CT 06451 USA
www.agcincorporated.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: SHEET METAL FABRICATION & ASSEMBLY, COMPOSITE
MATERIALS/MANUFACTURE, METAL FORMING METAL JOINING & BONDING/MOLDINGS
AGC is a unique company comprising of a Metals Business Unit and a Composite Business
Unit. The MBU core competency is sheet metal fabrication specializing in the hot
forming of titanium, aluminum, nickel alloys and their assembling through welding &
riveting. The CBU specializes in niche rubber & urethane compounding & molding. AGC also
is an expert in plastic injection and transfer molding. Using all of our disciplines AGC can
perform combination bonding, i.e. rubber to metal, plastic to metal and urethane to metal
in our controlled clean rooms.
29
EXHIBITOR PROFILES
AEROSPACE PRECISION, INC.
2851 Evans Street
Hollywood, FL 33020 USA
www.aerospaceprecision.com
EXHIBITOR PROFILES
AIP AEROSPACE
1395 S. Lyon Street
Santa Ana, CA 92705 USA
www.aipaerospace.com
BOOTH # 3-B109
PRODUCTS AND SERVICES: TOOLS/TOOLING, FABRICATED STRUCTURE - OTHER,
MANUFACTURING & PROCESSING EQUIPMENT
AIP Aerospace leads critical, industry-leading aerospace businesses. Current businesses
include Ascent Aerospace, the world’s largest aerospace tooling supplier and most
innovative integrator of turn-key assembly systems, Composite Horizons, a provider of high
temperature composites for demanding applications, and Texstars, which provides aircraft
transparencies, coatings, engineered thermoplastics and other components.
45 Edison Avenue
West Babylon, NY 11704 USA
www.aircraftlighting.com
BOOTH # 3-E107
PRODUCTS AND SERVICES: AIRCRAFT LIGHTING, ELECTRICAL EQUIPMENT/SYSTEMS,
INTERIORS/AIRCRAFT INTERIORS
Since 1998, Aircraft Lighting International has provided high-end, certified lamps for the
business and corporate jet market. In addition to supplying standard, certified fluorescent
tubes, we provide the world’s most efficient, LED direct-replacement lighting system for
your aircraft.
AIRGROUP DYNAMICS
4906 Patch Road
Orlando, FL 32822 USA
www.adiaero.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: AIRFRAME COMPONENTS, AIRCRAFT OVERHAUL & REPAIR
STATIONS, HYDRAULIC COMPONENTS/SYSTEMS/TOOLS/TESTING
Airgroup Dynamics, Inc. (ADI) is located in Orlando, Florida (USA). Over the years, ADI
has made itself known to numerous air carriers in the global marketplace as a component
repair one-stop shop and one of the best service platform providers in the industry. The
repair station is FAA, EASA and ISO/AS9110:2003 certified and prides itself on staying true
to its slogan, “SERVICE YOU CAN COUNT ON”. The military division’s CAGE /DD2345 ITAR
registered with the Department of Defense M28729.
ALABAMA DEPARTMENT OF COMMERCE
401 Adams Avenue, Suite 610
Montgomery, AL 36130 USA
www.commerce.alabama.gov
ALABAMA POWER ECONOMIC
& COMMUNITY DEVELOPMENT
600 North 18th Street
Birmingham, AL 35203 USA
www.amazingalabama.com
BOOTH # 3-E128
BOOTH # 3-E128
30
BOOTH # 3-E128
AMERICAN PRECISION ASSEMBLERS, INC.
120 Rowell Road
Hampshire, IL 60140 USA
www.apa1.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: ELECTRICAL CABLE ACCESSORIES/ELECTRICAL
HARNESSES, ELECTRO-MECHANICAL EQUIPMENT, WIRE/WIRE ROPE/CABLE MARKING/
WIRING HARNESSES/CABLE ASSEMBLY
American Precision Assemblers is a well-established supplier of wire harnesses, cable
assemblies, electrical and mechanical sub-assemblies. We serve some of the world’s
foremost companies spanning a broad range of industries and business segments. These
companies include respected leaders in the fields of medical diagnostics, aircraft,
industrial marking, vehicle systems, safety and security, aerospace, military and
defense among others.
AMERICAN STANDARD CIRCUITS
475 Industrial Drive
West Chicago, IL 60185 USA
www.asc-i.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: ELECTRICAL/ELECTRONIC ASSEMBLY, ELECTRICAL
EQUIPMENT/SYSTEMS
American Standard Circuits (ASC) prides itself on being a total solutions provider,
manufacturing quality rigid, metal-backed, flex and rigid-flex, RF/microwave Printed Circuit
Boards (PCB) as well as turnkey assemblies (PCBA). ASC services the defense and
aerospace markets producing prototype to large production orders. ASC has the expertise
to provide all technologies in a time-critical environment. Company qualifications include
ISO9001:2008, MIL-PRF 31032, and ITAR registration. It holds a number of key patents for
metal bonding processes as well. For more information, visit www.asc-i.com.
AMI METALS, INC.
1738 General George Patton Drive
Brentwood, TN 37027 USA
www.amimetals.com
BOOTH # 3-A148
ARKANSAS AEROPLEX
4701 Memorial Drive
Blytheville, AR 72315 USA
www.misscoeda.com
BOOTH # 3-E106
PRODUCTS AND SERVICES: ECONOMIC DEVELOPMENT, AIRCRAFT FACILITIES, FUEL/
FUEL SYSTEMS
The Arkansas Aeroplex is a multi-modal transportation facility located in northeastern
Arkansas. The Aeroplex is located in Blytheville, Arkansas on Interstate 55 between St.
Louis and Memphis. The Arkansas Aeroplex resides on the grounds of the former Eaker
Air Force Base. The Arkansas Aeroplex is divided into five areas to help you establish and
expand your business. The Office Park, Distribution Center, Aviation Park, Industrial Park,
and Arkansas International Airport have more than enough facilities and technology to
help any business that decides to land here.
31
EXHIBITOR PROFILES
ALABAMA USA
401 Adams Avenue, Suite 610
www.commerce.alabama.gov
EXHIBITOR PROFILES
ARKANSAS ECONOMIC
DEVELOPMENT COMMISSION
900 West Capitol Avenue, Suite 400
Little Rock, AR 72201 USA
www.ArkansasEDC.com
BOOTH # 3-E106
PRODUCTS AND SERVICES: GOVERNMENT/GOVERNMENT AGENCY
AEDC provides guidance to companies pursing investment in Arkansas including
incentives packages, financing options, and location assistance.
ASCENT AEROSPACE
1395 S Lyon Street
www.ascentaerospace.com
BOOTH # 3-B109
PRODUCTS AND SERVICES: TOOLS/TOOLING, MANUFACTURING & PROCESSING
EQUIPMENT, FABRICATED STRUCTURE - OTHER
Ascent Aerospace, an AIP Aerospace company, is comprised of the Tooling Group, the
world’s largest provider of aerospace tooling, and Ascent Integration and Automation,
which designs and implements turn-key assembly systems and provides critical enabling
production technologies. Ascent Engineering facilitates these businesses with design and
engineering support.
ASTRO TOOL CORPORATION
21615 S.W. T-V Hwy
Beaverton, OR 97006 USA
www.astrotool.com
BOOTH # 3-D112
ASTRONICS CORPORATION
130 Commerce Way
East Aurora, NY 14052 USA
www.astronics.com
BOOTH # 3-B148
PRODUCTS AND SERVICES: AIRCRAFT LIGHTING, AVIONIC EQUIPMENT/SYSTEMS/
INTEGRATION, ELECTRICAL EQUIPMENT/SYSTEMS
Astronics Corporation is a leading supplier of products to the aerospace, defense,
consumer electronics and semiconductor industries. Our products include advanced,
high-performance electrical power generation and distribution systems, lighting and safety
systems, avionics products, aircraft structures and automatic test and simulation systems.
AUSCO, INC.
425 Smith Street
Farmingdale, NY 11735 USA
www.auscoinc.com
BOOTH # 3-C157
SUB-SYSTEMS & ENGINEERED PRODUCTS, FUEL/FUEL SYSTEMS
Leading supplier of miniature precision fluid control components. Valves for hydraulic, fuel,
lube, and pneumatic systems for military and commercial aircraft. Cost effective standard
and custom valves in: insert, cartridge, manifold LRU, line mount, and port mount RingLock type fittings. Manifold solutions offered to our Tier One customers.
32
BOOTH # 3-A40
PRODUCTS AND SERVICES: ENGINEERED SYSTEMS & PRODUCTS, FASTENERS
We are among the world’s leading manufacturers for the design and production of
sophisticated fasteners and multi-component fastening systems and devices including
Latches/Struts/Fasteners/Quick Release Pins. We supply products used in a variety of
applications in diverse industries such as aircraft, aerospace, automotive, marine,
communications, railway, computers, medical equipment and many others.
AVIONICA, INC.
9941 W Jessamine Street
Miami, FL 33157 USA
www.avionica.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: COMMUNICATION SYSTEMS/EQUIPMENT, AIRCRAFT
GROUND SUPPORT EQUIPMENT, DATA RECORDERS/DATA ACQUISITION/ANALYSIS/
PROCESSING
Avionica, Inc. specializes in complete flight data and communications management
solutions comprising of both airborne avionics as well as ground support equipment.
Airborne products include the miniQAR Mk III with 3G/4G gateway avSYNC’s Immediate
Data Transfer, avRDC MAX an evolution to the miniQAR Family that can serve as a perfect
AID, avWiFi CWLU/ TWLU Router, satLINK MAX, the fully ARINC 741 compliant Iridium
SDU with avTRACK Aircraft Tracking and Telemetry Service.
EXHIBITOR PROFILES
AVIBANK MANUFACTURING, INC.
11500 Sherman Way
North Hollywood, CA 91605 USA
www.avibank.com
EXHIBITOR PROFILES
AVIONICS MAGAZINE
4 Choke Cherry Road, 2nd Floor
Rockville, MD 20850 USA
www.aviationtoday.com/av
BOOTH # 3-D145
PRODUCTS AND SERVICES: PUBLISHING
Avionics Magazine is the only publication that covers all segments of the worldwide
aviation electronics industry including commercial transport, business and general
aviation, military and rotorcraft. Our content reports in-depth on technical, business and
regulatory developments throughout the global avionics industry, which serves top
avionics and technology executives throughout the value chain.
B.L. HARBET INTERNATIONAL LLC
820 Shades Creek Parkway Ste 3000
www.bharbert.com
BOOTH # 3-E128
BALDWIN COUNTY EDA
22251 Palmer Street
Robertsdale, AL 36567 USA
www.baldwineda.com
BOOTH # 3-E128
BERTSCHE ENGINEERING CORPORATION
711 Dartmouth Lane
Buffalo Grove, IL 60089 USA
www.bertsche.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: MANUFACTURING & PROCESSING EQUIPMENT,
PRECISION MACHINING/ENGINEERING, FABRICATED STRUCTURE - BODY
Bertsche Engineering is a designer and manufacturer of high performance standard and
custom machine tools and robotics. Bertsche has pioneered the development of high
acceleration, high feedrate, long travel machining centers with integral smart fixturing
systems. Turnkey solutions include the manufacturing of aerospace structures such as
composite or aluminum floor beams, stringers and frames for major aerospace programs.
BIG COMMUNICATIONS
2121 2nd Ave North
www.bigcom.com
BOOTH # 3-E128
BILL AND HILLARY CLINTON NATIONAL AIRPORT
One Airport Road
Little Rock, AR 72202 USA
www.clintonairport.com
BOOTH # 3-E106
PRODUCTS AND SERVICES: LEASING & FINANCE, AEROSPACE SERVICES, AVIATION
PRODUCT SUPPORT
Home to six airlines and providing nearly 100 daily arrivals and departures, the Bill and
Hillary Clinton National Airport serves as the nerve center of Arkansas logistics. The
complex provides more than $1.2 billion in annual economic impact to the state, and
hosts a number of the state’s aviation clientele, including Dassault Falcon Jet. The
Airport recently completed a $67M Phase I Terminal Renovation and has begun a $30M
Concourse Upgrade.
34
BOOTH # 3-E128
BIRMINGHAM BUSINESS ALLIANCE
505 20th Street North
Birmingham, AL 35203-2607 USA
www.birminghambusinessalliance.com
BOOTH # 3-E128
BRALCO METALS
15090 Northam Street
La Mirada, CA 90638 USA
www.bralco.com
BOOTH # 3-A81
PRODUCTS AND SERVICES: AEROSPACE METAL STOCKHOLDING, STEELS, ALUMINIUM
PLATE
BRALCO METALS is a global leader in aerospace metals distribution. For over 70 years, we
have provided the industry with extensive stocks and fast deliveries. We carry some of the
widest and deepest stocks of aluminum, stainless steel, alloy steel, and other metals. We
are AS9100, AS9120, and ISO9001 certified. And, we are an approved supplier to most
aerospace OEM’s & subcontractors. Bralco is owned by Reliance Steel & Aluminum Co. the largest metals distribution company in the world.
BRISTOL INDUSTRIES
630 E. Lambert Road
Brea, CA 92821 USA
www.bristolind.com
BOOTH # 3-B81
PRODUCTS AND SERVICES: FASTENERS
Bristol Industries is a global leader in the design and manufacture of Aerospace SelfLocking Nuts and Gang Channels for metallic and composite applications. Bristol’s
expertise in Barrel nuts, Nut Plates, Shear & Tension Self-Locking nuts, Captive Washer
nuts, Self-Sealing nuts, Self-Aligning nuts and Gang Channels provides solutions for most
Commercial, Military, Airframe and Engine fastening needs. Our products come in a broad
range of aerospace fastener alloys and finishes.
BUSINESS OREGON
121 SW Salmon #205
Portland, OR 97204 USA
www.oregon4biz.com
BOOTH # 3-D112
Business Oregon is the State of Oregon’s economic development agency focused on
business retention, expansion and recruitment. Our Global Team works on increasing
exports from Oregon as well as finding foreign companies to invest in Oregon. Oregon is
experienced in commercial aircraft manufacturing, plus we have thousands of supply chain
companies eager to develop more international business. Our heavy lift helicopter,
general aviation and Unmanned Systems are strong as well. We look forward to meeting
with you to discuss mutually-beneficial international business opportunities.
35
EXHIBITOR PROFILES
BIRMINGHAM AIRPORT AUTHORITY
5900 Messer Airport Highway
www.flybirmingham.com
EXHIBITOR PROFILES
C.E. MACHINE CO, INC.
1741 S. Hoover Court
Wichita, KS 67209 USA
www.cemachine.com
BOOTH # 3-A159
PRODUCTS AND SERVICES: MACHINING, AIRFRAME COMPONENTS, SHEET METAL
FABRICATION & ASSEMBLY
C.E. Machine Company, Inc. is a one-stop source for all machining, assembly, and
kitting needs. Located in the heart of the Air Capital of the World, C.E. Machine has
called Wichita, Kansas home for 40 years and is located just east of Wichita’s MidContinent Airport. The current facility is 76,300 square feet with an opportunity to
expand for future growth on their eight acre lot. C.E. Machine has a total of 27 CNC
Machines with three palletized systems totaling 161 available pallets. AS9100 Certified.
CNC Lathes, Grinders and 3, 4, 5 Axis CNC Equipment.
CADENCE AEROSPACE
610 Newport Center Beach, Suite 950
Newport Beach, CA 92660 USA
www.cadenceaerospace.com
CHALET NO. 4
Cadence Aerospace formally PRV Aerospace has manufacturing sites which are located
in the US and Mexico and offers industry leading capabilities that include complex
hard-metal and aluminum machining, heat treatment, a variety of forming, including
titanium hot form, skin stretch form, welding, assembly and test. Our products are on
most major commercial and military aircraft and can be found in fuselage, wings,
empennage nacellles, actuation products, fuel manifolds and more.
CALSPAN AEROSPACE
4455 Genesee Street
Buffalo, NY 14225 USA
www.calspan.com
BOOTH # 3-E107
CAMBRIDGE VALLEY MACHINING, INC.
PO Box 160, 28 Perry Lane
Cambridge, NY 12816 USA
www.cvmusa.com
BOOTH # 3-E107
PRODUCTS AND SERVICES: MACHINING, FABRICATION & ASSEMBLY METAL
FORMING, PRECISION MACHINING/ENGINEERING
We offer contract manufacturing, machining, and assembly services for the defense and
aerospace markets. We specialize in complex parts using materials such as nickel based
alloys, titanium, and aluminum. Our parts and assemblies are used in fuel systems,
nacelles, hydraulic systems, actuators, airframe structures, and engines. We have 60+
CNC machine tools including 5-axis milling, horizontal milling, mill-turning, vertical
milling, and grinding machines.
36
BOOTH # 3-D112
PRODUCTS AND SERVICES: FABRICATED STRUCTURE - BODY, FABRICATED
STRUCTURE - WING, FABRICATED STRUCTURE - OTHER
CET Aerospace offers very complex engineering services with tolerances of up to 50
millionths of an inch; contract inspection and technical consulting services with more than
a 50,000-square-foot facility that operates a metrology lab and machine shop. Tooling,
prototype inspection, welding and assembly services. CET Aerospace also offers machine
and tool verification and reverse engineering services. It operates one of the leading
dimensional inspection laboratories in the western United States. The company has
achieved its ISO: 9003.
CHAMBER OF COMMERCE OF
HUNTSVILLE/MADISON COUNTY
225 Church Street
Huntsville, AL 35801 USA
www.huntsvillealabamausa.com
EXHIBITOR PROFILES
CET AEROSPACE
14707 SE River Road
Milwaukie, OR 97267 USA
www.cmm-measure.com
BOOTH # 3-E128
GLOBAL PRESENCE. LOCAL ACCESS .
When you work with CeramTec, you enjoy the best of both
ǁŽƌůĚƐ͗ĂƉĂƌƚŶĞƌǁŝƚŚŐůŽďĂůĐĂƉĂďŝůŝƟĞƐǁŚŽĐĂŶĂůƐŽ
ƉƌŽǀŝĚĞƚŚĞƌĞƐƉŽŶƐŝǀĞŶĞƐƐƚŚĂƚĐŽŵĞƐǁŝƚŚŚĂǀŝŶŐŽĸĐĞƐ
ĂŶĚŵĂŶƵĨĂĐƚƵƌŝŶŐĨĂĐŝůŝƟĞƐƌŝŐŚƚŚĞƌĞŝŶƚŚĞhŶŝƚĞĚ^ƚĂƚĞƐ͘
ĞƌĂŵdĞĐEŽƌƚŚŵĞƌŝĐĂŝƐƉĂƌƚŽĨĂŐůŽďĂůŽƌŐĂŶŝǌĂƟŽŶ
headquartered in Germany, with manufacturing and sales
ĨĂĐŝůŝƟĞƐƚŚƌŽƵŐŚŽƵƚƵƌŽƉĞ͕ƚŚĞh^͕ŚŝŶĂ͕ƌĂǌŝů͕DĞǆŝĐŽ͕
<ŽƌĞĂĂŶĚDĂůĂǇƐŝĂ͘dŚĞĂďŝůŝƚǇƚŽƐŚĂƌĞŝŶŶŽǀĂƟŽŶƐ͕ŶĞǁ
ŝĚĞĂƐĂŶĚďĞƐƚƉƌĂĐƟĐĞƐĞŶĂďůĞƐƵƐƚŽŽīĞƌĂůĞǀĞůŽĨ
ƉƌŽĚƵĐƟŽŶƋƵĂůŝƚǇĂŶĚĞĸĐŝĞŶĐǇĨŽĐƵƐĞĚŽŶůĞĂŶ
ŵĂŶƵĨĂĐƚƵƌŝŶŐƚŚĂƚŝƐƵŶƉĂƌĂůůĞůĞĚŝŶƚŚĞŝŶĚƵƐƚƌǇ͘KƵƌ/^K
ϵϬϬϭ͗ϮϬϬϴĐĞƌƟĮĐĂƟŽŶĞŶƐƵƌĞƐƚŚĂƚƉƌŽĐĞƐƐĞƐĂŶĚ
ƐƚĂŶĚĂƌĚƐĂƌĞŝŶƉůĂĐĞƚŽƐƵƉƉŽƌƚĞĸĐŝĞŶĐǇĂŶĚƋƵĂůŝƚǇĂƚ
ĞǀĞƌǇƉŚĂƐĞŽĨĚĞƐŝŐŶĂŶĚƉƌŽĚƵĐƟŽŶ͘
CeramTec North America Corporation
One Technology Place
Laurens, SC 29360-0089 USA
Phone: +1.864.682.3215
Fax: +1.864.682.1140
[email protected]
www.ceramtec.us
37
EXHIBITOR PROFILES
CHOCTAW DEFENSE
3 Skyway Drive
McAlester, OK 74501 USA
www.choctawdefense.com
BOOTH # 3-E111
PRODUCTS AND SERVICES: DEFENCE SYSTEMS EQUIPMENT
Choctaw Defense is the Nation’s leading Native American defense manufacturer. Our
superior record includes 20 years of proven success with military and prime contractors.
We are certified by the SBA as a tribally owned 8(a) and HUBZone manufacturer and
have three ISO 9001 certified facilities encompassing over 350,000 s.f. of manufacturing
space. Located in southeastern Oklahoma, Choctaw Defense is owned by the Choctaw
Nation of Oklahoma, the third largest Native American tribe in the U.S.
CINCINNATI THERMAL SPRAY, INC.
10904 Deerfield Road
Cincinnati, OH 45242 USA
www.cts-inc.net
BOOTH # 3-A123
PRODUCTS AND SERVICES: COATINGS, HEAT TREATMENT, ANTI-CORROSION
TREATMENTS/SYSTEMS
CTS provides high technology coatings to improve the performance of products
throughout a variety of industries. We provide solutions in the form of thermal spray
coating, dry film lubricants, porcelain enamels, anti-corrosion paints, and protective
sealers, along with turnkey service to machine and coat a final product.
CIRCOR AEROSPACE & DEFENSE
2301 Wardlow Circle
Corona, CA 92880 USA
www.circoraerospace.com
BOOTH # 3-D146
PRODUCTS AND SERVICES: ACTUATORS/ACTUATION SYSTEMS, ELECTROMECHANICAL EQUIPMENT, REPAIR/REPAIR & OVERHAUL
Circor Aerospace & Defense is focused on the design, development, and manufacture of
specialty fluidic control, actuation, and electro-mechanical products for demanding
aerospace and defense applications. CIRCOR Aerospace & Defense has business units
located in California, New York; Paris and Chemillé, France; Uxbridge, UK; Tangier, Morocco
and Suzhou, China. Parent company CIRCOR International is headquartered in
Burlington, Massachusetts and the CIRCOR Aerospace & Defense group is
headquartered in Corona, California.
CITY OF AUBURN
144 Tichenor Avenue, Suite 2
Auburn, AL 36830 USA
www.auburnalabama.org
BOOTH # 3-E128
CITY OF OPELIKA
204 7th Street South
Opelika, AL 35209 USA
www.opelika.org
BOOTH # 3-E128
38
#3 in U.S. for advanced degrees
SUPPLY
$7.6B in global aerospace exports
DEMAND
Access to a highly skilled workforce and a strategic Northeast location that’s within
800 kilometers of one-third of the U.S. economy. These are just two of the many reasons
Connecticut has become such an innovative hub for aerospace. See for yourself why
more than a thousand aerospace leaders of all sizes call Connecticut home.
Visit us in Hall 3,
Booth B118.
Visit CTforBusiness.com/advancedmanufacturing
EXHIBITOR PROFILES
COBRA SYSTEMS, INC.
3216 S Nordic Road
Arlington Heights, IL 60005 USA
www.cobrasys.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: AIRFLOW MEASURING TEST EQUIPMENT, AVIONICS
REPAIR & OVERHAUL/SUPPORT, TESTING EQUIPMENT AIRCRAFT
COBRA SYSTEMS is a leading supplier of PITOT/STATIC adapters and air data accessories
for corporate, military, commercial, & helicopter markets. We pride ourselves on the highest
quality products, prompt customer service, and in stock inventory. We manufacture RVSM
accessory kits, adapters, replacement seals/spacers, hose assemblies, and covers for pitot/
static/TAT/AOA & ice detectors. Cobra System is an authorized distributor for Laversab
RVSM Air Data Test Sets including the new 3-Output Model 6600. Our ISO certified
calibration facility is able to repair any leaking pitot/static equipment.
COMPOSITE ENGINEERING, INC.
5381 Raley Boulevard
Sacramento, CA 95661 USA
www.compositeeng.com
BOOTH # 3-D98
PRODUCTS AND SERVICES: UNMANNED AERIAL VEHICLES (UAV), AIRFRAME
COMPONENTS, COMPOSITE MATERIALS/MANUFACTURE
Composite Engineering (CEi) provides aerial targets, turn-key target operations, and
composite manufacturing services. CEi’s advanced aerial target systems are meeting the
training needs of the U.S. Department of Defense and allied nations around the world.
COMPOSITES HORIZONS
1471 W Industrial Park Street
Covina, CA 91722 USA
www.chi-covina.com
BOOTH # 3-B109
PRODUCTS AND SERVICES: FABRICATED STRUCTURE - OTHER, MANUFACTURING &
PROCESSING EQUIPMENT
Composites Horizons (CHI), an AIP Aerospace company, is a leading supplier of advanced
aerospace composites to the industry’s most demanding customers. For over 40 years, the
company has specialized in difficult-to-manufacture, performance-critical components,
utilizing the latest technologies to engineer aerospace composites, structures, and
assemblies that provide strength and high-temperature performance.
40
BOOTH # 3-B118
PRODUCTS AND SERVICES: GOVERNMENT/GOVERNMENT AGENCY, ECONOMIC
DEVELOPMENT
Connecticut is a leader in the aerospace and defense industry with more than 1,000
aerospace companies, an educated and trained workforce, an integrated supply chain,
world-class business markets, a high-technology infrastructure and a network of resources
that include world-renowned educational and technological facilities. The Connecticut
Department of Economic and Community Development (DECD) provides a business
concierge service, financing opportunities, tax benefits and support from a strong and
well-organized aerospace cluster.
CONSOLIDATED AEROSPACE MANUFACTURING
630 East Lambert Road
Brea, CA 92821 USA
www.conaeromfg.com
COVINGTON COUNTY
21754 Bill Benton Lane
Andalusia, AL 36421 USA
www.covingtoncountyedc.com
BOOTH # 3-B81
BOOTH # 3-E128
COVINGTON ELECTRIC COOPERATIVE
21754 Bill Benton Lane
Andalusia, AL 36241 USA
www.covington.coop
CPI AERO
91 Heartland Boulevard
Edgewood, NY 11717 USA
www.cpiaero.com
BOOTH #3-E128
CHALET NO. 4
CPI Aero is a U.S. manufacturer of structural assemblies for fixed wing aircraft, helicopters
and airborne Intelligence Surveillance and Reconnaissance (ISR) pod systems in both the
commercial aerospace and national security markets. CPI Aero also is a prime contractor
to the U.S. Department of Defense, primarily the Air Force. In conjunction with its assembly
operations, CPI Aero provides engineering, program management, supply chain
management, kitting and MRO services.
CR ONSRUD, INC.
120 Technology Drive
Troutman, NC 28166 USA
www.cronsrud.com
BOOTH # 3-B94
PRODUCTS AND SERVICES: MANUFACTURING & PROCESSING EQUIPMENT, TOOLS/
TOOLING, MACHINING
CR Onsrud is a US manufacturer of large format CNC machining centers and CNC routers
used in the high speed cutting of aerospace components made from non-ferrous metal,
plastic and composite materials. We will be located in the US Pavilion in the North Carolina
booth. Visit us at the booth or at our website at www.cronsrud.com for more information.
41
EXHIBITOR PROFILES
CONNECTICUT DEPARTMENT OF
ECONOMIC AND COMMUNITY DEVELOPMENT
505 Hudson Street
Hartford, CT 06106 USA
www.decd.org
EXHIBITOR PROFILES
CRISSAIR, INC.
28909 Avenue Williams
Valencia, CA 91355 USA
www.crissair.com
BOOTH # 3-B82
ACTUATORS/ACTUATION SYSTEMS, AIRCRAFT/SYSTEMS & EQUIPMENT
Since being founded in 1954, Crissair has been designing and manufacturing the best
quality custom fluid control components for nearly every airframe manufacturer and major
subcontractor in the commercial and military industry. Unmatched engineering excellence
and flexible manufacturing unlock tremendous value for a worldwide customer base. With
continuous improvement engrained into the culture of Crissair’s executive management
team and motivated workforce, Crissair is committed to fly high into the future exceeding
all expectations.
CURTISS-WRIGHT
Unit 5, Richview Office Park, Clonskeagh
Dublin, 14 Ireland
www.curtisswrightds.com
CHALET NO. 4
Curtiss-Wright’s Defense Solutions division is an industry-leading supplier of sophisticated
electronics products of highly engineered systems built to perform reliably in harsh
conditions. Sensors & Controls Division produces high performance electro-mechanical
actuation, precision position sensors, fluid controls and motion control subsystems, as well
as complex structural components for aerospace applications.
CYTEC INDUSTRIES, INC.
2085 East Technology Circle, Suite 300
Tempe, AZ 85284 USA
www.cytecengineeredmaterials.com
CHALET NO. 4
CYTEC Industries Inc. (NYSE:CYT) is a global provider of advanced materials for aerospace
and extreme-demand applications. Cytec produces prepregs, resin systems and adhesives;
ablatives; high temperature carbon-carbon materials and silicone based sealants;
thermoplastic materials; PAN and pitch-based carbon fibers; vacuum bagging
consumables, reusable vacuum systems and kitting solutions; composite tooling; conformal
coatings and plotting compounds; and additives for exterior finishes.
DEFENSE TECHNOLOGY EQUIPMENT INC.
45681 Oakbrook Court, Suite 107
Sterling, VA 20166 USA
www.defense-tech.com
42
BOOTH # 3-D133
BOOTH # 3-A80
PRODUCTS AND SERVICES: TOOLS/TOOLING, ELECTRICAL CABLE ACCESSORIES/
ELECTRICAL HARNESSES, FASTENERS
Headquartered in Miami, Florida and with offices in Madrid, Sevilla, San Jose Dos
Campos (Brazil) and Queretaro (Mexico), Delta International Inc. serves primarily the
global aerospace market in the Americas, Europe and Asia Pacific. For 35 years we have
been providing choices that our customers expect and deserve. Our company is known for
exceptional quality Aircraft Tools for maintenance, manufacturing and aircraft building.
Our mission is to offer quality Aircraft Tools to aerospace customers. We will offer
innovative products and services that are unique with exceptional customer service.
DENISON INDUSTRIES
22 Fielder Street
Denison, TX 75020 USA
www.denisonindustries.com
BOOTH # 3-D158
PRODUCTS AND SERVICES: CASTINGS, AIRFRAME COMPONENTS, MATERIALS &
COMPONENTS
Denison Industries is a producer of aluminum sand and permanent castings for the
Aerospace, Aviation, Defense and Commercial industries. DI is NADCAP Accredited in
Nondestructive Testing, Heat Treat and Welding. DI is also AS9100 & ISO 9001-2008
certified. We specialize in castings size from 1-3000 pounds in alloys 200 and 300 series.
Denison Industries has solidification modeling for development of pattern construction,
FAI inspection, including CMM and laser inspection. Denison Industries offers complete
product processing including machining, impregnation, assembly and paint.
DERCO AEROSPACE, INC.
8000 West Tower Avenue
Milwaukee, WI 53223 USA
www.dercoaerospace.com
BOOTH # 3-E140
PRODUCTS AND SERVICES: AEROSPACE SERVICES, COMPONENT REPAIR/OVERHAUL,
SPARE PARTS
For more than 35 years, Derco Aerospace, a Sikorsky company, has provided full military
logistics and technical support for fixed-wing aircraft. They offer an industry-leading suite
of fleet management solutions, including spares distribution, logistics solutions, repair and
overhaul services and technical solutions. Derco supports global military efforts in over 65
countries and maintains one of the largest and diversified aircraft spares inventories in the
world including more than 60,000 unique parts in stock.
43
EXHIBITOR PROFILES
DELTA INTERNATIONAL, INC.
4856 SW 72 Avenue
Miami, FL 33155 USA
www.deltaintl.com
EXHIBITOR PROFILES
DIRECT ALLOYS LLC
901 Broad Street
Utica, NY 13501 USA
www.directalloys.com
BOOTH # 3-E107
PRODUCTS AND SERVICES: SPECIALTY METALS, SUPERALLOYS, AEROSPACE
METAL STOCKHOLDING
Direct Alloys LLC, www.directalloys.com, is a dedicated clearinghouse and distributor of
certified superalloy, titanium and specialty steel mill products. We work with mills, forgers,
machine shops, fabricators, distributors and end-users to help sell their prime slow
moving or excess material directly to the market. Direct Alloys saves buyers and suppliers
precious time, energy and capital by enhancing their purchasing and selling resources. Our
unique online no charge database offers a dynamic value-added service for suppliers and
consumers of high performance metals.
DISCOVERY AVIATION, INC.
100 Aerospace Drive, Unit 4
Melbourne, FL 32901 USA
www.discovery-aviation.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: AIRCRAFT/MANUFACTURING, AIRCRAFT ENGINEERING &
DESIGN, CARBON FIBER
Discovery is a general aviation aircraft manufacturer, with engineering, development,
certification, flight test, production, sales and service capabilities. We have a global sales,
service and support network to support our aircraft. The Discovery 201 is a multi-role
utility aircraft just finishing FAA certification. It is a rugged, versatile seven seat aircraft,
designed to deliver cargo or people to remote, limited access locations on land, snow or
water. Discovery XL-2, certified in 2006 is the world’s best Trainer Aircraft with the lowest
operating costs of any IFR certified trainer.
DUCOMMUN INCORPORATED
23301 Wilmington Avenue
Carson, CA 90745 USA
www.ducommun.com
BOOTH # 3-E150
PRODUCTS AND SERVICES: ELECTROMECHANICAL AND MECHANICAL ASSEMBLY,
ELECTRICAL CABLE ACCESSORIES/ELECTRICAL HARNESSES, FABRICATION & ASSEMBLY
METAL FORMING
Ducommun is a global provider of manufacturing and engineering services, developing
innovative electronic, engineered and structural solutions for complex, high-cost-of-failure
applications in aerospace, defense and other technology driven markets. Our full-service
collaborative approach, broad capabilities and value-added services like new product
introduction, engineering, supply chain strategies and program management support our
customers’ complex electronic and structural needs.
44
EXHIBITOR PROFILES
DYNATECH INTERNATIONAL
150-M Executive Drive
Edgewood, NY 11717 USA
www.dynatechintl.com
BOOTH # 3-E161
PRODUCTS AND SERVICES: SPARE PARTS, PROJECT MANAGEMENT, REPAIR/REPAIR &
OVERHAUL
Dynatech is a full-service company that has been supporting military operators & MROs
worldwide with turbine engine & aircraft spares, repair management programs, logistic
solutions and superior customer service for more than 40 years. Dynatech is an exclusive
and/or authorized distributor for numerous OEMs, including UTAS, TAT, Condor Pacific,
Trisoft, SKF and many others. We maintain a large inventory of new and out-of-production,
hard-to-find parts. Dynatech also provides single source management for repair and
overhaul services. Visit us at www.dynatechintl.com
EDAC TECHNOLOGIES
5 McKee Place
Cheshire, CT 06033 USA
www.edactechnologies.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: Engine Components/Controls, Electron Beam Welding,
Composite Materials/Manufacture
EDAC Technologies (EDAC) manufactures precision machined and composite components
and assemblies for rotating and static applications used in commercial and military aircraft
engines. EDAC offers adjacent component and assembly MRO services as well as
prototyping and out of production spare part solutions to OEM and Tier 1 customers.
EDAC’s additional services include electron beam welding and the design and manufacture
of precision molds, fixtures, and gauges.
ELECTRONIC HARDWARE CORP EHC KNOBS
320 Broad Hollow Road
Farmingdale, NY 11735 USA
www.EHCknobs.com
BOOTH # 3-E107
PRODUCTS AND SERVICES: TRANSILLUMINATED CONTROL KNOBS, MECHANICAL
ASSEMBLIES
ELMORE COUNTY ECONOMIC
DEVELOPMENT AUTHORITY
10 Cambridge Court
Wetumpka, AL 36093 USA
www.elmoreeda.com
BOOTH # 3-E128
46
BOOTH # 3-A80
PRODUCTS AND SERVICES: EDUCATION/TRAINING
Embry-Riddle Aeronautical University, the world’s largest, fully accredited university
specializing in aviation and aerospace, is a nonprofit, independent institution offering
more than 75 baccalaureate, master’s and Ph.D. degree programs in its colleges of Arts &
Sciences, Aviation, Business, Engineering and Security & Intelligence. Embry-Riddle
educates students at residential campuses in Daytona Beach, Fla. and Prescott, Ariz.,
through the Worldwide Campus with more than 150 locations in the United States,
Europe, Asia and the Middle East, and through online programs.
EMINENCE MANUFACTURING, INC.
1000 Factory Street
Eminence, MO 65466 USA
www.eminencemo.com
BOOTH # 3-A135
PRODUCTS AND SERVICES: PRECISION MACHINING/ENGINEERING, AIRFRAME
COMPONENTS, HELICOPTER PARTS
Eminence Manufacturing Incorporated (EMI) exists to provide precision machined parts to
the aerospace industry. Complex Helicopter blade control linkage is one example of
products supplied ready for installation. A workforce of 40-50 people perform tasks in
unison to comply with ISO 9000 series Quality Standards. Located in scenic rural Missouri
near Metropolitan St. Louis, EMI is accessible to sub tier supplier support facilities and
convenient to major Aerospace contractors such as the Boeing Company.
ENSTROM HELICOPTER CORPORATION
2209 22nd Street
Menominee, MI 49858 USA
www.enstromhelicopter.com
BOOTH # 3-A93
PRODUCTS AND SERVICES: AIRCRAFT/MANUFACTURING, HELICOPTER PARTS
Enstrom Helicopter Corporation designs, fabricates, assembles, and tests a full line of light
single piston and turbine engine helicopters for training, executive transport, and
commercial operations in the global market. Enstrom has been manufacturing helicopters
for over 50 years. Our mission is to deliver the safest and best-supported helicopters in the
world. Enstrom is a wholly owned subsidiary of Chongqing Helicopter Investment Group
(CQHIC) and is located in Menominee, Michigan. For more information on Enstrom, visit
www.enstromhelicopter.com.
ENTERPRISE FLORIDA
800 N. Magnolia Avenue, # 1100
Orlando, FL 32803 USA
www.enterpriseflorida.com
BOOTH # 3-A80
47
EXHIBITOR PROFILES
EMBRY-RIDDLE AERONAUTICAL UNIVERSITY
600 S. Clyde Morris Boulevard
Daytona Beach, FL 32114-3900 USA
www.embryriddle.edu
EXHIBITOR PROFILES
ESCO FLUID CONTROLS
501 Del Norte Boulevard
Oxnard, CA 93030 USA
www.escofluidcontrols.com
BOOTH # 3-B82
PRODUCTS AND SERVICES: AIRCRAFT TESTING EQUIPMENT, SPACE/SPACE SYSTEMS,
ENGINE COMPONENTS/CONTROLS
ESCO Fluid Controls group supports a wide range of commercial and military
platforms,including fixed and rotary wing aircraft, Navy vessels, missiles, space launch
vehicles and satellite systems, with capabilities in fluid flow controls and filtration.
Crissair Inc, PTI Technologies Inc. VACCO Industries are recognized as well established
leaders at providing winning solutions to a diverse group of technically demanding,
solutions-oriented end markets. Embracing mutual commitment and collaboration with our
customers to comprehensively address their needs defines success at ESCO Fluid Controls.
ESSEX INDUSTRIES
7700 Gravois Road
St. Louis, MO 63123 USA
www.essexindustries.com
BOOTH # 3-A135
PRODUCTS AND SERVICES: OXYGEN & EMERGENCY SYSTEMS, ANTI-VIBRATION
SYSTEMS, FLIGHT CONTROL SYSTEM/SWITCHES
Essex Industries is a world leader in the design and manufacture of aerospace equipment
including platform controls, aircraft components, and life support and ground support
systems. Product lines include control grip assemblies, anti-gravity valves, hydraulic
pulsation dampeners, flame arrestors, protective breathing equipment, crew oxygen
delivery systems and medevac liquid oxygen systems. Essex Industries has established a
reputation for providing engineering solutions to customers’ toughest application
requirements.
FIRST AVIATION SERVICES INC.
15 Riverside Avenue
Westport, CT 06880 USA
www.firstaviation.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: MAINTENANCE/OVERHAUL, LANDING GEAR/SYSTEMS/
COMPUTERS/TYRES, ENGINE COMPONENT OVERHAUL
First Aviation Services Inc. (FAvS), located in Westport, Connecticut, is a leading provider of
repair and overhaul, rotables management and related engineering services to the aviation
industry worldwide. FAvS’ principal operating subsidiaries are Aerospace Turbine Rotables,
Inc. (AeTR) in Wichita, Kansas, and Piedmont Propulsion Systems, LLC (PPS) in WinstonSalem, North Carolina. More information about FAvS and its subsidiaries may be found on
the company’s website, www.firstaviation.com.
48
BOOTH # 3-C148
PRODUCTS AND SERVICES: ELECTROMECHANICAL AND MECHANICAL ASSEMBLY,
ELECTRICAL EQUIPMENT/SYSTEMS, ELECTRO-MECHANICAL EQUIPMENT
Flame Enterprises, Inc was established in 1969 on the philosophy of creating a ready
inventory for the Military, Aerospace and Transportation markets. Our product offering is
continually updated to meet the growing demands of these industries and our focus will
always be Electromechanical products, specializing in relays, relay sockets, circuit breakers,
switches and indicators. We possess one of the world’s largest Electromechanical
inventories to readily support the market’s current needs and uphold the value of
“Quality-Quantity-Quickly”.
FLANAGAN INDUSTRIES
25 Mill Street
Glastonbury, CT 06033 USA
www.flanaganindustries.com
BOOTH # 3-B118
FLG TECHNICS
425 SW 148th Avenue
Davie, FL 33325 USA
www.flgtechnics.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: COMPOSITE MATERIALS/MANUFACTURE, REPAIR/REPAIR
& OVERHAUL, ACCESSORIES
Repair Management Program Dedicated Repair Manager Controlled Maintenance
Cost 21 day dock -to-dock turn time Zero Cost exchange if turn time cannot be
met! If your unit is BER – we offer a replacement Exchange Program Zero cost
exchanges to customers under contract On-site consignments
FLORIDA AERONAUTICS, INC.
4100 N. Powerline Road, Suite A4
Pompano Beach, FL 33073 USA
www.florida-aeronautics.com
BOOTH # 3-A80
FLOW AEROSPACE
1635 Production Drive
Jeffersonville, IN 47130 USA
www.flowaero.com
BOOTH # 3-B109
PRODUCTS AND SERVICES: MANUFACTURING & PROCESSING EQUIPMENT,
TOOLS/TOOLING
Flow Aerospace, an AIP Aerospace company, is a world leader in composite machining
centers and the premier provider of Abrasive Waterjet technology. Focusing entirely on
aerospace, Flow understands the industry’s unique demands. Flow delivers tailored
program management, engineering and services, allowing customers to meet their goals.
49
EXHIBITOR PROFILES
FLAME ENTERPRISES INCORPORATED
21500 Gledhill Street
Chatsworth, CA 91311 USA
www.flamecorp.com
EXHIBITOR PROFILES
1 Brush Hill Road, Suite 318
New Fairfield, CT 06812 USA
www.fluidforming.com
BOOTH # 3-CD146
PRODUCTS AND SERVICES: FABRICATION & ASSEMBLY METAL FORMING, AIRCRAFT/
MANUFACTURING, METAL FORMING METAL JOINING & BONDING/MOLDINGS
Fluid Forming Technologies (FFT) supplies machinery (new or pre-owned) for
manufacturing processes and production cells encompassing sheet metal and
composite materials. Machinery includes, (not limited to): fluid cell and rubber pad
presses, hot forming presses, stretch form presses for sheet metal and extrusions, roll
formers, heat treatment systems, autoclaves, CNC routers, waterjets. FFT will locate
sources for special application machinery. Provide surplus machinery liquidation, auctions,
appraisals.
FORECAST INTERNATIONAL
22 Commerce Road
Newtown, CT 06470 USA
www.forecastinternational.com
BOOTH # 3-C146
PRODUCTS AND SERVICES: CONSULTANCY SERVICES, MARKETING/MARKET
RESEARCH, PUBLISHING
We employ a staff of expert analysts using advanced electronic forecasting processes to
develop long-range forecasts and market intelligence for the Aerospace, Defense, Power
Systems, & Electronics industries worldwide. FI delivers market intelligence in multiple
formats, including internet Real-time, CD, & hard copy. FI’s premiere on-line Platinum
Forecast System is the only one of its type worldwide. It provides instant solutions to
queries of all type within a 25 year spectrum, comprised of 10 years of detailed historical
& 15 years forecast production for hundreds of programs worldwide.
FRANKFURT-SHORT-BRUZA ASSOCIATES, P.C. (FSB)
5801 Broadway Extension, Suite 500
Oklahoma City, OK 73118 USA
www.fsb-ae.com
BOOTH # 3-E111
PRODUCTS AND SERVICES: HANGAR SPACE, MAINTENANCE/OVERHAUL
At FSB our mission is to partner with our clients to understand their business and to help
define their vision which is ultimately achieved in the success of their project and its
operation. Because FSB has specialized for over 70 years in the design of MRO’s, aircraft
maintenance hangars and aviation support facilities, our industry specific aviation teams
of Architects and Engineers provide our clients with sound and sustainable design, highquality documents, and personal touch in the design of these technically challenging
hangar and aviation facilities.
50
BOOTH # 3-A80
PRODUCTS AND SERVICES: AEROSPACE METAL STOCKHOLDING, SPECIALTY METALS,
MATERIALS & COMPONENTS
Future Metals, a Marmon Distribution Services/Berkshire Hathaway company, is a
leading supplier of aircraft quality metals to the global aircraft manufacturing and
maintenance industry with strategically located service centers in North America, The
United Kingdom, Europe and Asia. Product line includes Nickel, Stainless Steel, Titanium
and Aluminum alloys in the form of Tubing, Bars, Sheets, Extrusions and Roll-Forms. Focus
on increasing value for our customer through the implementation of total supply chain
solutions such as, global sub-contractor support networking and demand aggregation.
1506 Coolhurst Avenue
Sherwood, AR 72120 USA
www.galleysupport.com
BOOTH # 3-E106
PRODUCTS AND SERVICES: INTERIORS/AIRCRAFT INTERIORS, FASTENERS,
PRECISION MACHINING/ENGINEERING
GSI designs and manufactures interior hardware. Latches, retainers, door bolting systems,
lav latches, slides, and hinges. AS9100 Rev Certifed. Full design team. In house testing and
manufacture to print. Whatever you can dream to complete you interiors, we can make it
happen!
THE PL ATFORM
MATTERS
BOB RANCK | +1 703 276 9500 | GULFSTREAM.COM/SPECIALMISSIONS
51
EXHIBITOR PROFILES
FUTURE METALS LLC
10401 State Street
Tamarac, FL 33321 USA
www.futuremetals.com
EXHIBITOR PROFILES
GALLOWAY, WETTERNARK, EVEREST,
RUTENS & GAILLARD, LLP.
225 Church Street
Mobile, AL 36616 USA
www.gallowayllp.com
BOOTH # 3-E128
GENERAL ATOMICS AERONAUTICAL SYSTEMS, INC.
14200 Kirkham Way
Poway, CA 92064 USA
www.ga-asi.com
BOOTH # 3-B132
PRODUCTS AND SERVICES: UNMANNED AERIAL VEHICLES (UAV), RECONNAISSANCE/
SURVEILLANCE SYSTEMS
General Atomics Aeronautical Systems, Inc. (GA-ASI) is a world-class manufacturer of
proven, reliable Remotely Piloted Aircraft (RPA) and tactical reconnaissance radars, along
with advanced high-resolution surveillance systems, including the Predator®/Gray Eagle™
RPA series and Lynx® Multi-mode Radar system. GA-ASI provides long-endurance, missioncapable aircraft with the integrated sensor and data link systems required to deliver
persistent situational awareness.
GENERAL DYNAMICS
ORDNANCE AND TACTICAL SYSTEMS
150 Johnston Road
Marion, VA 24354 USA
www.gd-ots.com
BOOTH # 3-D132
PRODUCTS AND SERVICES: COMPOSITE MATERIALS/MANUFACTURE, AIRFRAME
COMPONENTS, RADARS & RADOMES
General Dynamics Ordnance and Tactical Systems Advanced Materials group produces
composite structures and mobile shelters for the commercial and defense markets. These
products include composite aerostructures, engine products, radomes, rocket motor cases,
missile bodies, and pressurant tanks. Our state-of-the-art facilities are located in Marion,
VA and Lincoln, NE where we use hand lay-up and filament winding to process an array of
high performance composite materials.
GIVON USA, INC.
2300 Merrill Creek Parkway, Unit #300
Everett, WA 98203 USA
www.hrgivon.com
BOOTH # 3-E147
PRODUCTS AND SERVICES: MACHINING, SHEET METAL FABRICATION & ASSEMBLY,
PRECISION MACHINING/ENGINEERING
Givon is a world class manufacturer of metallic aerostructure parts and subassemblies. For
more than 20 years, Givon has been a tier 1 supplier for leading commercial and military
'0!0$2.0-%0+1F#0#1202#%'!**7*-!2#"-,*7l+'*#57$0-+-#',%4#0#22
$!'*'27F#0#tlkk!#02'$'#"F#&4#122#Q-$Q2&#Q02#/3'.+#,2,"$!'*'27F
#&4#'%&*#4#*-$#6.#02'1#',!-+.*#6+!&',',%,"&0"+#2*1.021F#-$$#0
fully integrated and managed solutions including assembly, kitting and program
management.
52
BOOTH # 3-D132
PRODUCTS AND SERVICES: SUPPLY CHAIN MANAGEMENT, SENSORS &
TRANSDUCERS, ENGINES/AIRCRAFT
GMS is a supply chain and logistics management company. We specialize in the
worldwide distribution and supply of aerospace, defense, and security products. GMS
provides procurement solutions to our customers and expands the global marketplace for
our OEM partners. Big company capabilities with small company advantages. We create
solutions for international military logistics.
GREATER WICHITA
ECONOMIC DEVELOPMENT COALITION
350 W. Douglas
www.gwedc.org
BOOTH # 3-A159
PRODUCTS AND SERVICES: ECONOMIC DEVELOPMENT, GOVERNMENT/
GOVERNMENT AGENCY, TRAINING
Wichita is home to one of only five aerospace clusters in the world and is repeatedly
ranked the #1 U.S. metro for aviation manufacturing and known as the Air Capital of the
World. Five major OEM’s and hundreds of suppliers call this region home. Wichita offers a
pro-aviation environment with a low tax environment and the highest concentration of
available skilled aerospace manufacturing employees in the USA, the new Wichita State
University Innovation Campus and the National Institute for Aviation Research. There’s
no better place than Wichita, Kansas for aviation investment.
GREENSBORO ECONOMIC
DEVELOPMENT ALLIANCE
342 N. Elm Street
Greensboro, NC 27402 USA
www.greensboroeda.com
BOOTH # 3-B94
GULFSTREAM AEROSPACE CORPORATION
P.O. Box 2206
Savannah, GA 31406 USA
www.gulfstream.com
BOOTH # 3-C118
PRODUCTS AND SERVICES: AIRCRAFT/MANUFACTURING, AIRCRAFT SALES/LEASING/
CHARTERS
Gulfstream Aerospace Corporation, a wholly owned subsidiary of General Dynamics
(NYSE: GD), designs, manufactures and services the world’s most technologically
advanced business jets. The company offers a comprehensive fleet: the Gulfstream
G150TM, the G280TM, G450TM, the G550TM, the G500TM, the G600TM, the G650TM
and the G650ERTM We invite you to visit our website for more information and photos at
www.gulfstreamnews.com.
53
EXHIBITOR PROFILES
GMS CORPORATION
1984 Isaac Newton Square West, Suite 104
Reston, VA 20190 USA
www.gmsusa.com
EXHIBITOR PROFILES
GYRO-STABILIZED SYSTEMS
11990 Charles Drive
Grass Valley, CA 95945 USA
www.gyrostabilizedsystems.com
BOOTH # 3-A127
PRODUCTS AND SERVICES: SECURITY SOLUTIONS/SYSTEMS, RECONNAISSANCE/
SURVEILLANCE SYSTEMS, ELECTRO-OPTICS
Gyro-Stabilized Systems delivers defense and law enforcement markets with the highest
form of ultra-HD/5K airborne sensors, while providing sensor interchangeability to allow
end-users to tailor payloads according to mission requirements, and for easy sensor
upgrades as technology advances.
H.M. DUNN AEROSPACE
4201 S. 119th Street West
www.hmdunn.com
BOOTH # 3-A159
HADCO METAL TRADING, LLC.
2811 Charter Road
Philadelphia, PA 19154 USA
www.hadco-metal.com
BOOTH # 3-E107
HADCO Metal Trading, LLC., is your ONE-STOP source for Commercial and aerospace grade
materials: aluminum, stainless steel, aerospace steels, magnesium, titanium, engineered
grade plastics and related materials. With warehouses on the east and west coasts of the
U.S. and affiliate companies around the globe, HADCO supports companies worldwide
with our knowledgeable sales team, extensive inventory, quick turn-around times and
competitive pricing. At HADCO, our motto is .....OUR SERVICE, YOUR SUCCESS! Please visit
our website for more information: www.hadco-metal.com
HANGSTERFER’S
175 Ogden Road
Mantua, NJ 08051 USA
www.hangsterfers.com
BOOTH # 3-A105
PRODUCTS AND SERVICES: LUBRICANTS, CHEMICALS & RELATED PRODUCTS, TOOLS/
TOOLING
Aerospace Approved Coolants, Cutting Oils, Metalforming Compounds, Machine
Lubricants, Cleaners, Dielectric Fluids, Rust Inhibitors, Gun Lubes, and Accessories. Improve
Productivity, Surface Quality, and Tool Life. Especially for Aluminum, Carbon, Chromium,
Composites, Copper, Magnesium, Molybdenum, Nickel, Stainless Steel, Titanium, Tungsten,
Zirconium, and their alloys. Pleasant Odor, Non-Foaming, Long Lasting, Low Residue,
Bio-Renewable, Non-Hazardous and Non-Toxic. Free of Boron, Chlorine, Formaldehyde,
Secondary Amines, and Sulfur. GHS, REACh, RoHS, SCAQMD, and VOC, compliant. Made in
USA.
54
BOOTH # 3-E118
INNOVATIVE SOLUTIONS. PROVEN PERFORMANCE.
PRODUCTS AND SERVICES: CABLE ASSEMBLIES/TENSION REGULATORS,
COMPONENT REPAIR/OVERHAUL, ENGINEERED SYSTEMS & PRODUCTS
HARCO, is a designer and manufacturer of temperature sensors, interconnect cable
harness assemblies and other custom sensors for aerospace, industrial and marine
applications. Products include: RTDs, thermocouple temperature sensors, high temperature
and electrical cable harness assemblies, outside air temperature probes, total air
temperature probes and thermal mass air flow sensors. HARCO also has a fully licensed
repair station and offers cost-effective repair and replacement solutions.
HARLOW AEROSTRUCTURES LLC
1501 McLean Boulevard South
www.harlowair.com
BOOTH # 3-A159
PRODUCTS AND SERVICES: PRECISION MACHINING/ENGINEERING, AIRCRAFT/
SYSTEMS & EQUIPMENT, AIRFRAME COMPONENTS
Harlow Aerostructures is a leading supplier of complex machine structural components and
assemblies to the aerospace industry since 1954. Harlow is premier integration supplier
with experience in Engineering and Design, Manufacturing, Tooling and Assembly. As is
evidenced by the key roles we have played in the throttle quadrant development for the
following aircraft programs, Citation, Sovereign, XLS, Premier I, JPATS trainer, and
manufacturing Assemblies for Spirit’s 777 Smoke Barrier Door and Section 41/47 737 Floor
Beams; Boeing A10; and Gulfstream G650 Rear Fuselage Bulkheads and many more.
HARRIS CORPORATION
1025 West NASA Boulevard
Melbourne, FL 32919 USA
www.harris.com
CHALET NO. 28
HASKELL
111 Riverside Avenue
Jacksonville, FL 32202 USA
www.haskell.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: DESIGN/ANALYSIS/CONSULTANCY, ECONOMIC
DEVELOPMENT, LOGISTICS/WAREHOUSING/DISTRIBUTION
JAXUSA Partnership coordinates economic development in the Jacksonville, Florida
region, and partners with Jacksonville Aviation Authority (JAA) and Haskell in promoting
aviation industry development. JAXUSA is the overall project coordinator; JAA operates a
diversified four-airport system that serves the commercial, industrial, business and
recreational aviation community; and Haskell provides integrated, single-source site
location and design-build-finance services for Aviation and Aerospace customers’ facilities.
Aaron Bowman, [email protected], tel:+904-366-6671
55
EXHIBITOR PROFILES
HARCO
186 Cedar Street
Branford, CT 06405 USA
www.harcolabs.com
EXHIBITOR PROFILES
HAYNES INTERNATIONAL, INC.
1020 W. Park Avenue
Kokomo, IN 46970 USA
www.haynesintl.com
BOOTH # 3-B110
PRODUCTS AND SERVICES: SUPERALLOYS, TITANIUM & TITANIUM ALLOYS/TUBING,
TURBINE ENGINE COMPONENTS
Haynes International is a developer, manufacturer, and distributor of HASTELLOY(R)and
HAYNES(R) high-performance alloys used in high-temperature and corrosion applications.
Our global service centers stock our standard product forms and offer value-added services
to shorten your cycle time, reduce material waste and increase your operation’s efficiency.
We provide value beyond the alloys themselves. Haynes International is proud to celebrate
more than 100 years of alloy innovation. We are also proud that our alloys have been a
part of Aerospace history and will impact the future of Aerospace.
HELICOPTER ASSOCIATION INTERNATIONAL
1920 Ballenger Avenue
Alexandria, VA 22314 USA
www.rotor.com
BOOTH # 3-A101
PRODUCTS AND SERVICES: ASSOCIATIONS / GOVERNMENT AGENCIES, PUBLISHING
To provide its members with services that directly benefit their operations, and to advance
the international helicopter community by providing programs that enhance safety,
encourage professionalism and economic viability while promoting the unique
contributions vertical flight offers society.
HEXADYNE CORPORATION
361 Van Ness Way, Suite 303
Torrance, CA 90501 USA
www.hexadynegroup.com
CHALET NO. 4
Hexadyne provides defense equipment for the domestic and international marketplace.
We offer a myriad of products supporting fixed wing/rotor military aircraft. Our team
affords customers the ability to minimize risk through strategic partnerships and turn-key
solutions at significant cost savings. Our aircraft expertise is providing subsystems for
B-767 AWACS, F-4, F-15, F-16, P-3, C-130, E-2C/D, UH-60, AAH-64, foreign aircraft.
Hexadyne is major provider of spares for PAC2/3.
HONEYCOMB COMPANY OF AMERICA, INC.
1950 Limbus Avenue
Sarasota, FL 34243 USA
www.hcoainc.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: AIRFRAME COMPONENTS, STRUCTURES - FLIGHT
SERVICES HEAT, SPARE PARTS
Honeycomb Co. of America (HCOA) is recognized as a leader in the manufacture of bonded
metal-to-metal, metal-to-honeycomb, and honeycomb to epoxy-composite assemblies for
fixed-wing and rotary-wing aircraft. From raw material to the finished product, HCOA has the
capabilities and skilled workforce to produce the finest quality aerospace structures available
for today’s aircraft parts market. HCOA is accredited in NADCAP Non-Destructive Testing,
Chemical Processing, Heat Treating and Composites and is certified to the AS9100:2009,
Rev.C and ISO 9001:2008 standards.
56
BOOTH # 3-E128
ICG
(INTERNATIONAL COMMUNICATIONS GROUP, INC.)
230 Pickett’s Line
Newport News, VA 23603 USA
www.icg.aero
BOOTH # 3-D132
PRODUCTS AND SERVICES: COMMUNICATION SYSTEMS/EQUIPMENT, AVIONIC
EQUIPMENT/SYSTEMS/INTEGRATION, IN-FLIGHT ENTERTAINMENT IN-FLIGHT
ENTERTAINMENT
ICG (International Communications Group, Inc.) is a recognized leader within the
aerospace industry, in the development and manufacture of aeronautical communications
systems and data routing solutions for the General Aviation and Air Transport industries.
ICG’s products provide satellite-based global voice and data telecommunications
services for both cabin requirements and flight deck operations. ICG avionics provide
comprehensive communications solutions that can be customized for any size airframe or
application.
IMC/IMCI AEROSPACE GROUP
4411 Katella Avenue
Los Alamitos, CA 90720 USA
www.arrowheadproducts.net
BOOTH # 3-A162
PRODUCTS AND SERVICES: FABRICATION & ASSEMBLY METAL FORMING, FLEXIBLE
HOSES/JOINTS/CIRCUITS, TUBE BENDING & ASSEMBLY
The IMC/IMCI Aerospace Group can design, analyze, manufacture and test the full range
of high and low pressure pneumatic ducting systems. HP applications include Engine Build
UP (EBU)ducting, wing anti-ice ducting, APU/ECS/bleed air ducting and flexible joints. LP
applications include main cabin and flight deck distribution, galley and avionics ventilation,
heating cooling as well as ram air inlet ducting. With over 90 years of aerospace
engineering experience, IMC/IMCI includes Arrowhead Products (1937) Flexider SA (1921)
and Nanjing AP (2012).
IMPRESA AEROSPACE
2232 Custer Avenue
www.ImpresaAerospace.com
BOOTH # 3-A159
PRODUCTS AND SERVICES: SHEET METAL FABRICATION & ASSEMBLY, METAL/METAL
FABRICATION & ASSEMBLY/MATERIALS ANALYSIS, MACHINING
For more than 50 years, Impresa Aerospace has provided end-to-end solutions for the
Aerospace Industry. Our customers range from OEM and Tier 1 customers serving the
commercial and military aviation industries. Capabilities range from Sheet Metal
Fabrication, including Hydroform, Brake and Titanium Hot Brakeform, to traditional
machine shop functions like Precision 3-4-5 axis Machining and Forming and Machining
of Extrusions. Innovative Lean, cellular manufacturing gives Impresa the flexibility to
process everything from one-off prototypes to large volume production.
www.ImpresaAerospace.com
57
EXHIBITOR PROFILES
HUNTSVILLE MADISON COUNTY AIRPORT
1000 Glenn Hearn Bd/POB 20008
www.hsvairport.org
EXHIBITOR PROFILES
IMSAR LLC
940 South 2000 West, Suite 140
Springville, UT 84663 USA
www.imsar.com
BOOTH # 3-C98
PRODUCTS AND SERVICES: RADARS & RADOMES, RECONNAISSANCE/SURVEILLANCE
SYSTEMS, DEFENSE TECHNOLOGY
As the world leader is small Size, Weight, and Power (SWaP) technology, it is imperative to
have the ability to integrate into a wide array of UAV’s such as the Shadow, ScanEagle,
Integrator, Puma, Bat, and Stalker UAV platforms. Recently, IMSAR integrated into a Tier 1
UAV platform, Aerovironment’s Puma, within 2 weeks and acquired outstanding SAR
imagery. IMSAR has been able to provide customized integration solutions for specific UAS
and manned aircraft.
IMT FORGE GROUP, CLIFFORD-JACOBS FORGING
2410 N. 5th Street
Champaign, IL 61822 USA
www.imtforgegroup.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: FORGING, MACHINING, GEARS & GEAR BOXES/GEAR
CUTTING
When industry is looking for durable, reliable and performance-critical forged components,
they turn to the IMT Forge Group, servicing forging needs internationally for nearly 100
years. With facilities throughout North America, we offer forged, machined and heat
treated parts that range in weight from 1-800 pounds. Our business may be making parts,
but our passion is forging relationships.
INDIANA ECONOMIC DEVELOPMENT
CORPORATION/PURDUE UNIVERSITY
1 North Capitol Avenue, Suite 700
Indianapolis, IN 46204 USA
www.iedc.in.gov
BOOTH # 3-B97
PRODUCTS AND SERVICES: ECONOMIC DEVELOPMENT
The Indiana Economic Development Corporation (IEDC) leads the state of Indiana’s
economic development efforts, focusing on helping companies grow in and locate to the
state. Governed by a 12-member board chaired by Governor Mike Pence, the IEDC
manages many initiatives, including performance-based tax credits, workforce training
grants, public infrastructure assistance and talent attraction and retention efforts. For
more information about the IEDC, visit www.iedc.in.gov.
58
BOOTH # 3-E147
PRODUCTS AND SERVICES: MANUFACTURING & PROCESSING EQUIPMENT, ASSET
LIQUIDATION/TRACKING
Worldwide leading dealer in used aerospace machinery. IMT supplies machinery for all
applications and materials including aluminum, titanium, steel, & composites. Available
machinery includes 3 & 5 Axis CNC Gantry Profilers, C Frame & Bridge Type, Vertical
Turning, Horizontal Boring Mills, Autoclaves, Waterjets, Stretch Forming, Fluid Cell, &
Hydroform Presses. IMT provides surplus machinery liquidations, auctions, sealed bid
sales, consignments, and appraisals. Noteworthy customers include The Boeing
Company, Triumph Group, GKN Aerospace, and United Launch Alliance to name a few.
INDUSTRIAL METALS INTERNATIONAL LTD.
2065 Fifth Avenue
Ronkonkoma, NY 11779 USA
www.industrialmetals.com
BOOTH # 3-E162
PRODUCTS AND SERVICES: MATERIALS & COMPONENTS, STEELS, SPECIALTY METALS
IML is focused on the supply of raw material to Aerospace companies. We are the largest
supplier of several grades and forms of material such as 17-4PH tube to the Aerospace
Industry today. IML stocks bar, tube, sheet, plate, strip, forgings and wire products. We
12-!)+,7%0"#1-$+2#0'*',!*3"',% 32,-2*'+'2#"2-BF2',*#112##*F**-72##*
F3.#0**-71F'2,'3+F*3+',3+F0-,8#@'1..0-4#" 7,"13..*'#1
material to all major Aerospace OEM’s. The full list of our approvals is on our website.
www.industrialmetals.com.
INGENIUM TECHNOLOGIES
4216 Maray Drive
Rockford, IL 61107 USA
www.ingenium.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: DESIGN/ANALYSIS/CONSULTANCY, ACTUATORS/
ACTUATION SYSTEMS, TESTING EQUIPMENT AIRCRAFT
Ingenium Technologies is a leading engineering services organization, providing
outsourcing, consulting and staffing solutions with an aerospace component/system
focus. Ingenium provides a full range of component and system level Design, Analysis,
Development, Integration, Operations, Software and Technical Writing expertise. Lately,
Ingenium has been involved with the design, FEA and building of custom aerospace
actuator iron birds and test stands.
59
EXHIBITOR PROFILES
INDUSTRIAL MACHINE TOOL, INC.
PO Box 508, 911 6th Street
Anacortes, WA 98221 USA
www.industrialmachinetools.com
EXHIBITOR PROFILES
INGERSOLL MACHINE TOOLS, INC.
707 Fulton Avenue
www.ingersoll.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: MANUFACTURING & PROCESSING EQUIPMENT
Ingersoll Machine Tools supplies Automated Fiber Placement machines (AFP), composite
machining centers & metal removal equipment to the aerospace, mass transit, energy,
industrial & many other markets. Ingersoll’s AFP is used around the world on various
aerospace programs. Because of Ingersoll’s vast experience in high-performance, highprecision medium to large scale machining, Ingersoll is the world leader in machines for
titanium components. Turn-key solutions provide Ingersoll customers with guaranteed
success & support. Please contact us for more details on our product line.
INTEGRATED PROCUREMENT TECHNOLOGIES (IPT)
320 Storke Road
Goleta, CA 93117 USA
www.iptsb.com
BOOTH # 3-B147
Flutstraße 78
Kleve, 47533 Germany
www.Ipsen.de
BOOTH # 3-C128
PRODUCTS AND SERVICES: MANUFACTURING & PROCESSING EQUIPMENT, METAL
FORMING METAL JOINING & BONDING/MOLDINGS, HEAT TREATMENT
Ipsen designs and manufactures industrial vacuum furnaces, atmosphere furnaces and
supervisory control systems for a wide variety of thermal processing markets including:
Aerospace, Commercial Heat Treating, Medical, Energy and Automotive. With production
locations in Europe, America and Asia, along with representation in 34 countries, choosing
Ipsen means choosing a partner in success.
ITT AEROSPACE CONTROLS
28150 Industry Drive
Valencia, CA 91355 USA
www.ittaerospace.com
BOOTH # 3-A98
PRODUCTS AND SERVICES: ACTUATORS/ACTUATION SYSTEMS, HYDRAULIC
COMPONENTS/SYSTEMS/TOOLS/TESTING, ANTI-VIBRATION SYSTEMS
ITT Aerospace Controls designs, develops and manufactures fluid control devices and
utility actuators for the Aerospace Industry. Our product lines include linear and rotary
actuators, motor-operated and solenoid-operated valves for fuel, hydraulic, water and
pneumatic applications, pumps for water and fuel systems and electro-mechanical
switches. Our products are qualified worldwide on virtually all commercial aircraft, business
jets, helicopters, military aircraft and land-based military equipment.
60
BOOTH # 3-A98
PRODUCTS AND SERVICES: ANTI-VIBRATION SYSTEMS, CONNECTOR ACCESSORIES/
CONNECTORS, ACTUATORS/ACTUATION SYSTEMS
ITT is a leading manufacturer of highly engineered, customized solutions for the energy,
transportation and industrial markets. Our legacy of innovation is reflected in our trusted
products and brands including Cannon connectors, Enidine energy absorption devices,
and Aerospace Controls fluid control devices and actuators. We continue to build on this
heritage and to partner with customers to solve their most critical problems.
ITT ENIDINE
7 Centre Drive
Orchard Park, NY 14127 USA
www.enidine.com
BOOTH # 3-A98
PRODUCTS AND SERVICES: ANTI-VIBRATION SYSTEMS, ELASTOMERIC MOUNTS/
PRODUCTS/SEALS, INTERIORS/AIRCRAFT INTERIORS
ITT Enidine designs and manufactures energy absorption and vibration isolation products
for the commercial aviation business. Protecting cabin interiors from noise and vibration
to seat recline products, we are continually striving to improve the safety and comfort of
passenger and crew. Our products include interior noise and vibration isolators, stow bin
actuators, rate controls, and seat locks. We’ve produced world-class engineered solutions
for engine isolation and electronics isolation challenges for over 30 years.
ITT INTERCONNECT SOLUTIONS - ITT CANNON
666 East Dyer Road
www.ittcannon.com
BOOTH # 3-A98
PRODUCTS AND SERVICES: CONNECTOR ACCESSORIES/CONNECTORS, ELECTRICAL
CABLE ACCESSORIES/ELECTRICAL HARNESSES, INTERCONNECTION SYSTEMS
ITT Cannon, a world leader in interconnect solutions, designs and manufactures highly
engineered connectors for the aerospace market. From the invention of rack-and-panel
and D-subminiature to the latest fiber-optic, composite and miniaturized connectors,
Cannon has been synonymous with innovation and quality for 100 years. Our customers
depend on us to solve their most critical problems, and we focus on partnering with them
to find solutions to their unique challenges.
JANEWAY MACHINE, INC./JMI INTERNATIONAL LLC
6228 S. 161st West Avenue
Sapulpa, OK 74066 USA
www.janewaymachine.com
BOOTH # 3-E111
PRODUCTS AND SERVICES: MACHINING
We represent the small business sector in Oklahoma providing 5 axis complex
machining and bench top assemblies to tier I suppliers. We specialize in high volume
machining with Palletized systems operating 2nd & 3rd shift lights out. We are AS9100
certified and Itar registered. We are hub zone, woman owned and operated for meeting
the needs of government requirements. We work on many platforms such as 737, 787,
747-8, 777, G650 & G280. We pride ourselves in our customer service in which we have
built our reputation on.
61
EXHIBITOR PROFILES
ITT CORPORATION
1133 Westchester Avenue
White Plains, NY 10604 USA
www.itt.com
EXHIBITOR PROFILES
JBT CORPORATION
1805 West 2550 South
Ogden, UT 84401 USA
www.jbtaerotech.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: GROUND HANDLING/GROUND SUPPORT EQUIPMENT
JBT® is a global leader in the design and manufacture of cutting edge ground support
equipment and, airport gate equipment featuring Jetway® passenger boarding bridges
and an expanded family of JetPower® 400 Hz ground power and JetAire® preconditioned
air products supplying mobile, hangar and military applications. JBT also supplies airport
asset management, consulting, parts, and maintenance services. As a single-source
supplier with an unparalleled product range, Jetway Systems® offers customized solutions
and provides seamless integration of the systems and equipment.
JET INFORMATION SERVICES, INC.
901 Broad Street, Suite 218
Utica, NY 13501 USA
www.jetinventory.com
BOOTH # 3-E107
PRODUCTS AND SERVICES: INFORMATION PROVIDER, MARKETING/MARKET
RESEARCH, CONSULTANCY SERVICES
Jet Information Services, Inc., www.jetinventory.com, is an independent publisher of
the World Jet Inventory commercial jet and turboprop fleet status reports and online
databases. The WJI reports provide quarterly status of orders, deliveries, retirements,
stored aircraft and conversions, and current world fleet operators. The WJI website
includes a removed aircraft, gross order, and annual backlog database of the world
commercial jet aircraft >30 seats. The online graphics capability offers a unique visual
fleet analysis tool. The WJI reports are available online, or in CD formats.
KADDAS ENTERPRISES INC.
3588 West Directors Row
Salt Lake City, UT 84104 USA
www.kaddas.com
BOOTH # 3-C98
KALLMAN WORLDWIDE, INC.
4 North Street, Suite 800
Waldwick, NJ 07463-1842 USA
www.kallman.com
BOOTH # 3-D133
Exhibit with confidence in the U.S. International Pavilion, organized by Kallman
Worldwide, Inc. Prime locations, premier business environments and professional
attention to details ensure your success anywhere in the world.
62
CHALET NO. 4, BOOTH # 3-D118
PRODUCTS AND SERVICES: AIRCRAFT/MANUFACTURING, AIRFRAME COMPONENTS,
WEAPON INTERFACE
Kaman Aerospace operates 15 locations globally, supplying services from design to
delivering major integrated sub-sections. Kaman supplies design & structural system
engineering, composites & metal fabrication & assembly, a full turnkey service for tooling
design & manufacturing, specialty bearings (flight controls, doors, landing gear) test &
certification, and complete aircraft assembly & subsystem integration capability. Kaman
provides manned & unmanned helicopters, safe & arm solutions for missile & bomb
systems & ruggedised military memory systems & non-contact precision memory systems.
KBR BUILDING GROUP
100 Capitola Drive, Suite 301
Durham, NC 27713 USA
www.kbrbuildinggroup.com
BOOTH # 3-B94
LMI AEROSPACE INC.
411 Fountain Lakes Boulevard
St. Charles, MO 63301 USA
www.lmiaerospace.com
CHALET NO. 4
LMI Aerospace, Inc. is a leading supplier of structural assemblies, kits and components,
and a provider of design engineering services to the aerospace and defense markets. LMI
fabricates, machines, finishes, integrates, assembles and kits machined and formed close
tolerance aluminum, specialty alloy, composite components, and higher level assemblies.
LMI also provides engineering and program management services, supporting aircraft
product lifecycles and fleet support via a complete turnkey engineering solution.
LOCKHEED MARTIN
6801 Rockledge Drive
Bethesda, MD 20777 USA
www.lmco.com
LOOS & CO., INC.
1 Cable Road
Pomfret, CT 06258 USA
www.loosco.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: CABLE ASSEMBLIES/TENSION REGULATORS, WIRE/WIRE
ROPE/CABLE MARKING/WIRING HARNESSES/CABLE ASSEMBLY, TOOLS/TOOLING
Loos & Co., Inc. manufactures wire rope to every aviation specification there is. Loos is the
sole manufacturer to the Boeing BMS-7-265 wire rope specification. Loos also
manufactures wire ropes to ISO 2020 and also to the British Specification (2W 12) for
steel wire ropes for aircraft use. In addition, Loos also makes wire rope cable assemblies
which are used as flight controls. Loos also manufacturers wire rope fittings and sells
swaging and cutting tools for wire ropes and cables as well as safety locking wire. Loos is
AS9100 registered.
63
EXHIBITOR PROFILES
1332 Blue Hills Avenue
Bloomfield, CT 06002 USA
www.kaman.com/aerospace
EXHIBITOR PROFILES
13914 E. Admiral Place, Suite A
Tulsa, OK 74116 USA
BOOTH # 3-E111
PRODUCTS AND SERVICES: MACHINING
M&M Manufacturing, Inc. is a Premier supplier of aerospace machined parts and
assemblies. With a variety of high-speed machining centers, including horizontal, vertical
and turning, we are ready to meet your emergent and long term needs. World-Class
companies such as Spirit Aerosystems, CPI Aerostructures, Boeing and the US Department
of Defense are just a few industry leaders utilizing our services. M&M is an AS9100C
Registered Company and has the latest in Engineering software including Catia, Solidworks, and Esprit and a fully integrated MRP/ERP software for managing product and work
flow.
MAC AEROSPACE CORP.
14558 Lee Road
Chantilly, VA 20151 USA
www.macerospace.com
BOOTH # 3-D132
M A C
A E R O S P A C E
C O R P O R A T I O N
PRODUCTS AND SERVICES: SPARE PARTS, DISTRIBUTION, HELICOPTER PARTS
MAC Aerospace Corporation is a recognized international leader in the logistical support of
aircraft and advanced military defense systems. Through the use of strategic sourcing and
other Supply Chain Management techniques, the company provides urgently needed parts
and components for military aircraft, radar and weapon systems worldwide. Over the years,
MAC has established itself as a reliable supplier for a wide range of components and
services, including difficult-to-find and obsolete parts. MAC Aerospace is an ISO
9001:2008 Certified company. Customers include the U.S. DoD and its Allies.
MAKINO
7680 Innovation Way
Mason, OH 45040 USA
www.makino.com
CHALET NO. 8, BOOTH # 3-A110
As a world leader in advanced CNC machining centers, Makino is committed to
providing high-performance, leading-edge machining technologies and innovative,
engineered process solutions that enable manufacturers to focus on making what
matters. www.makino.com
MAROTTA CONTROLS, INC.
78 Boonton Avenue, PO Box 427
Montville, NJ 07045 USA
www.marotta.com
BOOTH # 3-C110
®
PRODUCTS AND SERVICES: AIRCRAFT SYSTEMS, ACTUATORS/ACTUATION SYSTEMS,
ELECTRICAL EQUIPMENT/SYSTEMS
Discover Control Solutions For Your Mission Critical Applications. This year Marotta will
feature our award-winning power conversion technology, control actuation systems,
innovative multi-function valves and our ITAR-Free satellite propulsion controls.
64
Innovation At All Altitudes
For more than 120 years, Harris has delivered
innovative solutions to connect, inform and
protect the world. Our aerospace and defense
customers rely on our mission-critical solutions to
solve their toughest challenges—at every level.
Learn more at harris.com.
EXHIBITOR PROFILES
MARVIN GROUP
261 W. Beach Avenue
Inglewood, CA 90302 USA
www.marvingroup.com
BOOTH # 3-C82
PRODUCTS AND SERVICES: WEAPON CARRIAGE & RELEASE, TESTING EQUIPMENT
AIRCRAFT, ELECTROMECHANICAL AND MECHANICAL ASSEMBLY
The Marvin Group is comprised of 5 companies sharing synergies to support the Global
Aerospace and Defense communities. Marvin Engineering designs & produces weapon
suspension & release equipment for various aircraft platforms as well as other electromechanical systems. Marvin Test Solutions produces armament test equipment & airborne
electronics. Marvin Land Systems designs APUs & ECUs for military vehicles. Flyer Defense
designs & builds tactical military land vehicles. Lapeer Industries specializes in structural
fabrication, welding & machining. Please visit our booth and product display.
MATTCO FORGE INC.
16443 Minnesota Avenue
Paramount, CA 90723 USA
www.mattcoforge.com
BOOTH # 3-A149
PRODUCTS AND SERVICES: FORGING
Since 1969, Mattco Forge has produced exceptional forged seamless rolled rings.
Continuous investment in plant and equipment coupled with development of strong
engineering, metallurgical and operations talent has successfully positioned Mattco as a
key supplier to the aerospace industry. A broadened product line, refined quality controls
and engineering expertise reinforce our forward thinking dedication to customer needs.
Today, we are one of the fastest growing aerospace forging companies in the world. We
are proud of our exceptional reputation for reliability, service and quality.
MET PLASTICS, INC.
701 Lee Street
Elk Grove Village, IL 60007 USA
www.metplastics.com
BOOTH # 3-C128
PRODUCTS AND SERVICES: COMPOSITE MATERIALS/MANUFACTURE, MACHINING
MET Plastics is an AS9100 certified custom injection molder specializing in aerospace
components. Capabilities include design/moldflow analysis, injection moldbuilding,
plastic injection molding from 40-720 tons, machining, and assembly. Experience with
high performance resins including Ultem PEI, Radel PPSU, and PEEK.
66
BOOTH # 3-C128
PRODUCTS AND SERVICES: COMPONENT REPAIR/OVERHAUL, MANUFACTURING &
PROCESSING EQUIPMENT
Midwest Aero Support, Inc., which has been in operation for 25 years, has developed a solid
reputation in the aviation industry for providing quality component repairs at reasonable
prices with quick turn times and personalized customer service. MAS repair capabilities
include mechanical, pneumatic, electrical, electronic components, composites, laminate
panels and passenger and crew seats. CERTIFICATIONS: FAA Repair Station MXSR849K,
EASA Repair Station 145.4679, Cage Code 0VXA1, ISO 9001:2008 and
EN/JISQ/AS9100:2009, ITAR Registered
MISSISSIPPI, USA
501 North West Street, P.O. Box 849
Jackson, MS 39201 USA
www.mississippi.org
BOOTH # 3-B145
Mississippi is home to dozens of the world’s most renowned aerospace companies that are
thriving as a result of the state’s compelling business advantages. Mississippi’s productive,
well-trained workforce, low operating costs, minimal tax burden, easy access to U.S. and
international markets, and proximity to important military operations have created a
competitive advantage for GE Aviation, Airbus Helicopters, Rolls-Royce, and Lockheed
Martin. Find out how Mississippi Works at www.mississippi.org.
MOBILE AIRPORT AUTHORITY
1891 Ninth Street
www.brookleycomplex.com
BOOTH # 3-E128
MOBILE COUNTY COMMISSION
205 Government Street
BOOTH # 3-E128
MONROE-UNION COUNTY
ECONOMIC DEVELOPMENT
3900 Paul J. Helms Drive
Monroe, NC 28110 USA
www.developunion.com
BOOTH # 3-B94
Monroe-Union County Economic Development is the agency that manages recruitment
and retention of businesses for Union County, NC in the Charlotte USA region. The City of
Monroe, in Union County, was named one of the Top 10 Aerospace Clusters in the
Southeastern United States. Our leadership anticipates and provides exactly the right
business environment for aerospace manufacturing, giving us the highest geographic
concentration of aerospace companies in North and South Carolina. Union County is home
to 19 aerospace firms, of which 17 are within a 7 mile (11km) radius.
67
EXHIBITOR PROFILES
MIDWEST AERO SUPPORT, INC.
1303 Turret Drive
Machesney Park, IL 61115 USA
www.midwestaerosupport.com
EXHIBITOR PROFILES
NANOMECH INC.
2447 Technology Way
Springdale, AR 72764 USA
www.nanomech.com
BOOTH # 3-E106
PRODUCTS AND SERVICES: MACHINING, BODY ARMORS, LUBRICANTS
NanoMech is shipping globally to Fortune 100 companies and emerging companies who
have chosen to innovate their way to the top by incorporating our nano-engineered
solutions into disruptive and more competitive products. NanoMech has brought
revolutionary and transformative innovation to world leaders in energy manufacturing,
exploration & service; auto, truck & marine manufacturing; Indy & NASCAR racing;
agriculture & construction equipment manufacturers; refining & formulating lubrication
manufacturers; aerospace manufacturing; textile manufacturers; & advanced military
applications.
NATIONAL PRECISION BEARING
GROUP OF MECHATRONICS, INC.
8152 304TH Avenue SE, P.O Box 5012
Preston, WA 98050 USA
www.nationalprecision.com
BOOTH # 3-E147
PRODUCTS AND SERVICES: SUPPLY CHAIN MANAGEMENT, DISTRIBUTION, BEARINGS
National Precision Bearing delivers supply chain solutions for long lead time aerospace
bearings and installation tools. NPB Provides JIT, Kanban, consignment, stocking programs,
supplier management, and other logistic programs for fixed wing and rotary aircraft
manufacturers and contractors. National Precision Bearing stocks airframe control
bearings, sphericals, rod-ends, bushings, instrument bearings, needle bearings, installation
tools, removal tools, and proof load testing systems for most AS and major aircraft OEM
bearing specifications.
NBM METALS
2929 West 12th
Houston, TX 77008 USA
www.nbmmetals.com
BOOTH #3-AB148
PRODUCTS AND SERVICES: METAL/METAL FABRICATION & ASSEMBLY/MATERIALS
ANALYSIS, CASTINGS, LANDING GEAR/SYSTEMS/COMPUTERS/TYRES
NBM Metals is the leading USA manufacturer of bronze alloys inclusive of AMS 4880 &
AMS 4881 high strength Nickel Aluminum Bronzes with full accreditations for the aircraft
industry. NBM Metals foundry in Lorain, Ohio specializes in the production and distribution
of brass, bronze and copper alloys with warehouses in the USA, France and Mexico. We are
ready to support your immediate requirements for shipments anywhere in the world on a
very prompt basis, typically from our vast inventories.
68
HALL 3, STAND E107
Taking Flight
IN NEW YORK
New York State is a leader in the development and
application of aerospace and defense technologies.
We’re a world-wide competitor and home to
hundreds of premier companies focusing on new
business developments. Through strategic partnerships,
we hope to expand our services globally and better serve
the international aerospace market. Come see what’s
XEOMRKζMKLXMR2I[=SVO7XEXI,EPP7XERH).
:MWMXYWSRXLI[IFEX www.esd.ny.gov
Empire State Development is committed to being
recognized on a global scale as the economic
development engine driving job growth, strategic
investment and prosperity in New York State.
State of New York Department
of Economic Development
9RMXIH/MRKHSQ3ηGI
154-160 Fleet Street
London EC4A 2DQ
UNITED KINGDOM
'SRXEGX1EP(SRRIPP](MVIGXSV
8IP
)QEMPQEPHSRRIPP]$R]WIYVSTIGSQ
EXHIBITOR PROFILES
NCEAST ALLIANCE
1020 Red Banks Road, Suite 202
Greenville, NC 27858 USA
www.nceast.org
BOOTH # 3-B94
NCEast Alliance: Strategic mid-Atlantic US East Coast location. Easy transportation/
logistics access to three deep water ports and 65 of top 100 metros within
700miles/1100km. Qualified, productive manufacturing workforce with low rates of
unionization, two engineering universities and robust Workforce Development and STEM
education programs. Aerospace-Defense cluster includes: Spirit AeroSystems, AAR, Eaton,
UTC Aerospace (Kidde), Honeywell, Finmeccanica-DRS, TCOM, MCAS Cherry Pt. and
Seymour Johnson AFB, USMC & USCG Aviation MRO Depots & state supported Air/Land/
Sea UAS test site.
NEONICKEL
Walker Industral Park
Blackburn, BB1 2QE UK
www.neonickel.com
BOOTH # 3-B157
NEW YORK STATE
DEPARTMENT OF ECONOMIC DEVELOPMENT
625 Broadway
Albany, NY 12245 USA
www.empire.state.ny.us
NMG AEROSPACE
4880 Hudson Drive
Stow, OH 44224 USA
www.nmgaerospace.com
BOOTH # 3-E107
BOOTH # 3-C106
PRODUCTS AND SERVICES: AIRCRAFT/SYSTEMS & EQUIPMENT, HYDRAULIC
COMPONENTS/SYSTEMS/TOOLS/TESTING, SUB-SYSTEMS & ENGINEERED PRODUCTS
NMG Aerospace is a $115 Million aerospace solutions provider specializing in electromechanical valves, pressure & manually actuated devices, undercarriage modules
(including steering components, axle components, brakes and hydraulic actuators),
evacuation system products, water system products and seating components. Core
competencies include design, machining, assembly, test and the management of
resources to handle large projects with low risk.
NORDAM
6911 N. Whirlpool Drive
Tulsa, OK 74129 USA
www.NORDAM.com
BOOTH # 3-E145
PRODUCTS AND SERVICES: ENGINE COMPONENT OVERHAUL, INTERIORS/AIRCRAFT
INTERIORS, TRANSPARENCIES
Employing 2,500 people across facilities on 3 continents, NORDAM designs, certifies and
manufactures integrated propulsion systems, nacelles and reversers for business jets; builds
composite aircraft structures, interior shells, custom cabinetry and radomes; and
manufactures aircraft transparencies. NORDAM also is a major third-party provider of
maintenance, repair and overhaul services to the military, commercial airline and air freight
markets and serves as the North American repair station for Airbus. Partnership with GECAS
and huge spares/rotables inventory. Visit NORDAM.com.
70
NORTH CAROLINA - ECONOMIC
DEVELOPMENT PARTNERSHIP OF N.C.
15000 Weston Parkway
Cary, NC 27513-2118 USA
www.ThriveNC.com/aerospace
BOOTH # 3-B94
The State of North Carolina offers aerospace firms significant competitive advantages,
including one of the best business climates in America. Join companies like Curtiss-Wright,
GE Aviation, Honda Aircraft Co., Spirit AeroSystems, and UTC Aerospace Systems. The
team from the state’s new Economic Development Partnership of N.C. offers personal
service to help your company thrive in North Carolina.
NORTH STATE AVIATION
4001 N. Liberty Street
Winston-Salem, NC 27105 USA
www.northstateaviation.com
BOOTH # 3-B94
PRODUCTS AND SERVICES: AIRCRAFT OVERHAUL & REPAIR STATIONS, AIRCRAFT
MODIFICATIONS
North State Aviation is a Certified FAR 145 Repair Station with authority and capabilities
for Heavy Maintenance and Modifications on 737-300 thru -500 and 737NG -700 thru
-900/900ER aircraft. Located at Smith Reynolds Airport (INT) in North Carolina, centrally
located on the east coast, the North State Aviation facility is a 6 bay 737 facility with 400+
full-time, highly skilled and experienced employees. Our motto is: Quality Performance is
the Defined Value.
NORTHWEST ARKANSAS REGIONAL AIRPORT
One Airport Boulevard., Suite 100
Bentonville, AR 72712 USA
www.flyxna.com
BOOTH # 3-E106
Northwest Arkansas Regional Airport is a Regional Commercial Airport with 14 US direct
destinations and approximately 50 flights daily with over 60% of our passengers business
travelers flying into NW Arkansas to do business here with some of the largest corporations
in the US located here.
20818 44th Avenue, Suite 201
Lynnwood, WA 98036 USA
www.ntew.com
BOOTH # 3-E147
PRODUCTS AND SERVICES: TOOLS/TOOLING, ENGINEERED SYSTEMS & PRODUCTS,
SPECIALIST FABRIC ASSEMBLY
INNOVATION BY DESIGN- Nova-Tech Engineering has over 48 years of experience
supplying quality tooling and equipment to the aerospace industry, and in going the extra
mile to provide innovative solutions to difficult problems. Nova-Tech specializes in solutions
for: Aerospace Tooling; Assembly Systems; Specialty Systems; Product Handling; Factory
Integration; Automation and Controls. Nova-Tech’s business model, experience,
capabilities, resources, project management approach, and quality and supplier
management system all lend to superior performance in meeting customers’ objectives.
71
EXHIBITOR PROFILES
PRODUCTS AND SERVICES: ECONOMIC DEVELOPMENT, CONSULTANCY SERVICES,
GOVERNMENT/GOVERNMENT AGENCY
EXHIBITOR PROFILES
OKLAHOMA DEPARTMENT OF COMMERCE
900 N. Stiles Avenue
Oklahoma City, OK 73104 USA
www.okcommerce.gov
BOOTH # 3-E111
The Oklahoma Departmnet of Commerce is the primary economic development entity in
the state. Our mission is to increase the quantity and quality of jobs in Oklahoma. We do
that through business attraction, creation and retention; community development;
knowledge-based industry development; and workforce development, recruitment and
retention.
ORION INDUSTRIES
1590 A Street NE
Auburn, WA 98002 USA
www.orionquality.com
BOOTH # 3-E147
PRODUCTS AND SERVICES: SHEET METAL FABRICATION & ASSEMBLY, MACHINING,
FABRICATION & ASSEMBLY METAL FORMING
Orion is a leader in manufacturing of precision metal fabrication parts for the aerospace
and defense industries. As a 2011 Boeing Supplier of the Year, Orion has exceptional
quality and delivery ratings backed by world-class service and support. Orion is the
recipient of the Boeing Performance Excellence Award for the last 5 Years. We offer CNC
machine fabrication, mechanical and hydraulic assembly, kitting and integration services,
and supply chain solutions. Orion is ISO 9001 and AS9100 certified, ITAR registered, and
Cage code 6X195.
5990 NW 31st Avenue
Fort Lauderdale, FL 33309 USA
www.panamericantool.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: TOOLS/TOOLING
Pan American Tool is a supplier of precision metal cutting tools and pneumatic tools for
aviation applications, commercial, business and military. The company is headquartered
in Fort Lauderdale, Florida, and was founded in 1986. Over 600 airline operators, 1,500
aircraft repair facilities and most aircraft manufacturers in more than 70 countries
worldwide use Pan American tools. It is America’s largest in stock supplier of quality
aircraft cutting tools.
PANASONIC AVIONICS CORPORATION
26200 Enterprise Way
Lake Forest, CA 92630 USA
www.panasonic.aero
BOOTH # 3-B131
PRODUCTS AND SERVICES: IN-FLIGHT ENTERTAINMENT, ANTENNAS/ANTENNA
SYSTEMS, REPAIR/REPAIR & OVERHAUL
For more than 35 years, Panasonic Avionics Corporation has strengthened the
connection between the world’s leading airlines and their passengers. In partnership
with these airlines, Panasonic Avionics designs and implements breakthrough IFEC
solutions that engage and delight passengers. The company’s solutions give airlines
the power to amplify their brand, foster passenger loyalty, generate additional ancillary
revenue, and reduce operating costs. Panasonic Avionics is recognized globally for its
experience and leadership in innovation and system reliability.
72
EXHIBITOR PROFILES
PARADIGM PRECISION
3651 SE Commerce Avenue
Stuart, FL 36997 USA
www.paradigmprecision.com
BOOTH # 3-A132
PRODUCTS AND SERVICES: FABRICATION & ASSEMBLY METAL FORMING,
MACHINING, CASTINGS
Paradigm Precision is a world leader in the manufacture of complex fabrications, structures,
castings, assemblies & precision machined components for gas turbine engines. Paradigm’s
core capabilities include laser services, air flow measurement, thermal coatings, EDM, and
precision machining with expertise in processing super alloys & special process technologies.
Maintaining plants located on 3 continents with 1900+ employees, we support commercial
& military aviation, power generation, marine, rotary wing & un-mannedaerial platforms,
providing critical technologies and added value solutions.
BOOTH # 3-A127
PARADIGM SRP
11811 North Brantly
Houston, TX 77034 USA
www.paradigmsrp.com
PRODUCTS AND SERVICES: WEAPON INTERFACE, WEAPON CARRIAGE & RELEASE,
AERONAUTICS, MISSILES & FIRE CONTROLS
Paradigm SRP, LLC, is a defense technology provider focused on military and law
enforcement products and solutions. The company develops, manufactures and supports a
unique range of products for special operations forces and elite law enforcement units. For
more information, visit www.paradigmsrp.com.
PARTSBASE, INC.
905 Clint Moore Road
Boca Raton, FL 33487 USA
www.partsbase.com
BOOTH # 3-C140
PRODUCTS AND SERVICES: ECOMMERCE SOLUTIONS/MARKETPLACE/E LEARNING,
MARKETING/MARKET RESEARCH, CONSULTANCY SERVICES
PartsBase, Inc. is the most comprehensive and advanced Aviation Marketplace in the
industry. We currently have over 30,000 end users in over 159 countries all over the world
who utilize our system on a daily basis to buy and sell aircraft parts. Our extensive databases
contain over 114 million line items of inventory including everything from components, to
rotables and consumables, to airframe parts. We also provide Market Intelligence reports on
your inventories.
301 Highland Avenue
Jenkintown, PA 19046 USA
www.pccairframeproducts.com
BOOTH # 3-A40
PRODUCTS AND SERVICES: AIRCRAFT/MANUFACTURING, AIRFRAME COMPONENTS,
MACHINING
74
BOOTH # 3-A40
Precision Castparts Corp.
PRODUCTS AND SERVICES: CASTINGS
PCC Structurals is the world leader in superalloy, aluminum and titanium investment
casting. With applications in jet aircraft engines, airframes, industrial gas turbine (IGT)
engines, military armaments, medical prosthesis, and many other industrial markets,
we provide a wide portfolio of high-quality components, some as large as 100 inches
(250cm).
PCX AEROSTRUCTURES
300 Fenn Road
Newington, CT 06111 USA
www.pcxaero.com & www.camtechaero.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: PRECISION MACHINING/ENGINEERING, TURBINE
ENGINE COMPONENTS, AIRFRAME COMPONENTS
PCX Aerostructures is a leading source of precision machining services, offering complex,
specialized manufacturing of hard alloys and integrated special processing services
including heat treating, painting and non-destructive testing. Specialized capabilities
include grinding, threading, gear shaping and spline grinding. Our Cam-Tech
Manufacturing division performs precision machining of structural airframe components
including wing and fuselage components. Additional production capabilities include large,
tight tolerance structural assemblies.
PERRYMAN COMPANY
213 Vandale Drive
Houston, PA 15342 USA
www.perrymanco.com
BOOTH # 3-C162
PRODUCTS AND SERVICES: TITANIUM & TITANIUM ALLOYS/TUBING, MATERIALS &
COMPONENTS, MACHINING
PIONEER HUMAN SERVICES
7440 West Marginal Way S.
Seattle, WA 98108USA
www.pioneerhumanservices.org
BOOTH # 3-E147
75
EXHIBITOR PROFILES
PCC STRUCTURALS, INC.
4600 SE Harney Drive
www.pccstructurals.com
EXHIBITOR PROFILES
PIONEER INDUSTRIES
7440 W. Marginal Way S.
Seattle, WA 98108 USA
www.pioneersheetmetal.com
BOOTH # 3-E147
®
®
PRODUCTS AND SERVICES: METAL/METAL FABRICATION & ASSEMBLY/MATERIALS
ANALYSIS, FABRICATION & ASSEMBLY METAL FORMING, METAL FORMING METAL
JOINING & BONDING/MOLDINGS
As an award winning full-service sheet metal fabrication and machining shop, Pioneer
Industries provides turn-key solutions and full integration into the aerospace and
commercial industry supply chains. Pioneer prides itself on producing high-quality products
at competitive prices. The plants have over 100,000 square feet of manufacturing space
and capabilities include comprehensive sheet metal, machining, finishing, water jet and
assembly services for a wide range of products.
PLATTSBURGH INTERNATIONAL AIRPORT
PO Box 310, 7061 State, Route 9
Plattsburgh, NY 12901 USA
www.montrealairport-us.com
PLYMOUTH ENGINEERED SHAPES/
PLYMOUTH TUBE CO.
29W150 Warrenville Road
Warrenville, IL 60555 USA
www.plymouth.com
BOOTH # 3-E107
BOOTH # 3-B93
PRODUCTS AND SERVICES: TITANIUM & TITANIUM ALLOYS/TUBING, SPECIALTY
METALS, MATERIALS & COMPONENTS
Plymouth Engineered Shapes manufactures semi-finished cost-saving extrusions in
Titanium, Stainless Steels and Nickel Alloys. Our ability to extrude complex shapes over
length in a single operation equates to less downstream machining and finish operations
in your process. Plymouth Tube Co. manufactures a full-range of Stainless Steel & Nickel
Alloy precision aerospace tubing to your seamless and welded & drawn tubing
specifications. Additionally, the Trent plant of Plymouth Tube is one of a few 21-6-9 tubing
manufacturers and is the only 21-6-9 approved supplier on Boeing’s 787 Dreamliner.
POWERSOUTH ENERGY COOPERATIVE
770 Washington Avenue, Suite 170
Montgomery, AL 36104-3837 USA
www.powersouth.com
PRECISION ALLOY SERVICES, INC.
PO Box 125
Blanchester, OH 45107 USA
www.precisionalloyservices.com
BOOTH # 3-E128
BOOTH # 3-C106
PRODUCTS AND SERVICES: AEROSPACE METAL STOCKHOLDING, SUPERALLOYS,
SPECIALTY METALS
Precision Alloy Services is a specialty metals distributor and processor located near
Cincinnati, Ohio. Precision Alloy Services carries a large inventory of materials including
nickel, cobalt, and titanium alloys and alloy and stainless steels in a variety of sizes of bar,
plate, and sheet. Processing includes bar sawing, water-jet cutting and other services. We
seek to partner with our customers to understand their needs and provide the highest level
of customer service.
76
BOOTH # 3-A40
PRECISION SENSORS DIVISION
50 Seemans Lane
Milford, CT 06460 USA
www.precisionsensors.com
BOOTH # 3-B118
PRODUCTS AND SERVICES: PRESSURE SENSORS/CONTROLLERS, ETC., HYDRAULIC
COMPONENTS/SYSTEMS/TOOLS/TESTING, MATERIALS & COMPONENTS
PTI TECHNOLOGIES INC.
501 Del Norte Boulevard
Oxnard, CA 93030 USA
www.ptitechnologies.com
BOOTH # 3-B82
PRODUCTS AND SERVICES: AIRCRAFT ENGINES, FILTERS/FILTRATION, HYDRAULIC
COMPONENTS/SYSTEMS/TOOLS/TESTING
PTI Technologies Inc. (PTI) is a leading provider of flow control and filtration solutions for
the global aerospace market. For more than 80 years, PTI has developed and applied new
technology to meet the most demanding requirements found in all types of commercial
and military aircraft. Our expertise & applications extend to virtually all service fluids;
hydraulic, fuel, lubrication, pneumatic, coolant and cabin air. PTI applies advanced
technology to solve unique flow control problems in the aerospace industry.
Phone: +1 (805) 604-3700 www.ptitectechnologies.com
PURDUE UNIVERSITY PURDUE RESEARCH FOUNDATION
1281 Win Hentschel Boulevard
West Lafayette, IN 47150 USA
www.prf.org
BOOTH # 3-B97
PRODUCTS AND SERVICES: EDUCATION/TRAINING, ECONOMIC DEVELOPMENT,
RESEARCH & DEVELOPMENT/CONSULTANCY
Purdue University is focused on providing world-leading expertise and research
capabilities to aerospace and aviation companies. The Purdue Research Foundation is
welcoming companies interested in locating in its fifth research park, which is adjacent to
the Purdue campus in West Lafayette, Indiana. Included in the development is the Purdue
Airport. Land is available within taxi distance of the runway. The park is also the home of
Zucrow Labs, a premier facility focused on gas turbine and rocket combustion, energetic
materials, turbo machinery, laser diagnostics and automotive combustion.
QRP, INC.
2307 Mercantile Drive NE
Leland, NC 28451 USA
www.qrp-inc.com
BOOTH # 3-B81
77
EXHIBITOR PROFILES
PRECISION CASTPARTS CORP.
4650 SW Macadam Avenue
www.precast.com
EXHIBITOR PROFILES
RAPID GLOBAL BUSINESS SOLUTIONS INC [RGBSI]
1200 Stephenson Highway
Troy, MI 48083 USA
www.rgbsi.com
BOOTH # 3-A111
PRODUCTS AND SERVICES: ENGINEERING AND CONSULTANCY, DESIGN/ANALYSIS/
CONSULTANCY, RECRUITMENT
RGBSI is a MI USA based AS 9100 Rev C certified company. We provide customized
engineering design services. CAD/CAM/CAE solutions, complete Product Design &
Development. RGBSI offers FULL Staffing Services in the areas of Engineering, Design,
Information Technology, Professional, Administrative and Industrial categories. Empower
QLM (Quality Lifecycle Management) – Enterprise Wide Cloud Based FAI/APQP/PPAP/
Supplier Quality, Supply Chain and Manufacturing Software.
REGIONS FINANCIAL CORPORATION
1900 5th Ave North, 6th Floor
www.regions.com
BOOTH # 3-E128
RELLI TECHNOLOGY, INC.
1200 S Rogers Circle
Boca Raton, FL 33487 USA
www.Relli.com
BOOTH # 3-A80
PRODUCTS AND SERVICES: SPARE PARTS, FASTENERS, TURBINE ENGINE
COMPONENTS
Relli Technology, Inc. is an international spare parts distributor for American made systems.
Relli Technology is certified to ISO-9001:2008 and AS9120. Defense Logistic Agency QSLD
listed (Qualified Supplier List) for Class 2, Class 3 and Quick Release Pins and Rivets.
Knowledge: experts at sourcing latest systems as well as obsolete legacy or hard to find
part component and equipment. World largest stock for armored vehicles like M109,
Bradley, M113. Extensive inventory of Boeing fasteners for commercial airlines.
RENEGADE MATERIALS CORPORATION/
MAVERICK CORPORATION
3363 South Tech Boulevard
Miamisburg, OH 25342 USA
www.renegadematerials.com
BOOTH # 3-C106
PRODUCTS AND SERVICES: COMPOSITE MATERIALS/MANUFACTURE, MATERIALS &
COMPONENTS, TURBINE ENGINE COMPONENTS
Renegade Materials Corporation & Maverick Corporation are leaders in the development
and large scale production of high temperature and other advanced composite
materials. Products include high temperature polymer resins, prepregs, adhesives and
films. The companies produce affordable, non-toxic aerospace qualified polymide,
bismaleimide and epoxy chemistries for RTM, autoclave and compression molding
applications from 200°C to over 400°C. Maverick is also an aerospace qualified source for
compression molded composite friction & wear components for high temperature
applications up to 400°C.
78
BOOTH # 3-B118
PRODUCTS AND SERVICES: PRECISION MACHINING/ENGINEERING, ENGINEERING
AND CONSULTANCY, TOOLS/TOOLING
Reno Machine specializes in the Design and Manufacture of Complex Tooling, Fixtures
and Composite Molds,Development/Production Components,Large Machined
Components, NC 5 Axis Milling up to 35’,CNC Turning up to 144”dia.5 Axis Composites
Machining,Manufacturing Support Services,Design, Tooling, Machine and Support
Equipment, CNC&CMM Programming Services. Reno Machine supports 2 of the largest
Henri Line’ 5 Axis Gantry Mills on the U.S.East Coast at 410”x 93”x 84” & 24,000 rpm,+
a Breton Eagle 1500/2T 5-Axis 157” X 118” X 59” 28,000 rpm CNC Gantry Mill. ISO
9001:2000 & AS9100C, ITAR Registered.
RENTON COIL SPRING CO.
425 S. 7th Street
Renton, WA 98057 USA
www.rentoncoilspring.com
BOOTH # 3-D162
PRODUCTS AND SERVICES: SPRINGS, SPECIALTY METALS, TITANIUM & TITANIUM
ALLOYS/TUBING
Renton Coil Spring Co. (RCS) is a world-class spring manufacturer for aerospace and
performance markets and has been providing superior quality parts and performance since
1949. Design and material capabilities, along with complete performance solutions has
lead RCS to become a top supplier of quality springs, wire forms, assemblies and flat metal
parts with thousands of applications across the world.
RISE MANUFACTURING
1605 East Iola
Broken Arrow, OK 74014 USA
www.rise-mfg.com
BOOTH # 3-E111
RISE Manufacturing produces exceptional products for aerospace companies while
helping reduce customers’ internal costs. We provide contract manufacturing and OEM
services, including high-speed, multi-axis precision machining. Utilizing our engineering
expertise, we work with customers to create cost-effective, custom solutions that uphold
superior product standards. This is what separates us from our competitors. We provide
unique process and design engineering that aids in production setup, which lowers
customers’ costs. RISE Manufacturing is proud to be AS9100 certified.
RIX INDUSTRIES
4900 Industrial Way
Benicia, CA 94510 USA
www.rixindustries.com
BOOTH # 3-D148
PRODUCTS AND SERVICES: AIRCRAFT/SYSTEMS & EQUIPMENT, WEAPON CARRIAGE
& RELEASE, UNMANNED AERIAL VEHICLES (UAV)
Since 1878, RIX Industries has manufactured oil-free, high-pressure gas compressors and
gas generation systems. Our aerospace systems are used for pneumatic weapons release,
cryogenics, and breathing support. Our experience, quality, and product longevity speaks
for itself.
79
EXHIBITOR PROFILES
170 Pane Road
Newington, CT 06111 USA
www.reno-machine.com
EXHIBITOR PROFILES
ROCKFORD AREA ECONOMIC
DEVELOPMENT AGENCY
100 Park Avenue, Suite 100
www.rockfodil.com
BOOTH # 3-C128
ROGERSON KRATOS/INTHEAIRNET
2201 Alton Parkway
Irvine, CA 92606 USA
www.rogersonkratos.com
BOOTH # 3-B158
PRODUCTS AND SERVICES: AVIONIC EQUIPMENT/SYSTEMS/INTEGRATION,
IN-FLIGHT ENTERTAINMENT, COMMUNICATION SYSTEMS/EQUIPMENT
Rogerson Kratos leads the way in providing an outstanding product line of instruments,
active matrix liquid crystal display systems and other aerospace products which can be
found throughout the most current world airliners, helicopters and military aircraft.
IntheAirNet Develops Sophisticated wired and wireless in-flight entertainment and
mapping systems that maximize passenger experience and total reliability utilizing the
latest innovation.
ROLLED ALLOYS
125 West Sterns Road
Temperance, MI 48182 USA
www.rolledalloys.com
BOOTH # 3-B157
PRODUCTS AND SERVICES: SPECIALTY METALS, AEROSPACE METAL STOCKHOLDING,
Rolled Alloys is an innovator in the metals industry with their extensive processing
capabilities, website and e-business platforms, alloy development and a highly trained
sales and metallurgical staff ready to aid customers with their alloy requirements. Rolled
Alloys’ clients are increasingly looking to them as a supplier of value, not just metal. One
of the largest suppliers of stainless steels, nickel, cobalt and titanium alloys, Rolled Alloys
maintains 13 locations across North America and Asia, with additional representatives in
Europe. www.rolledalloys.com.
ROTOR & WING MAGAZINE
4 Choke Cherry Road, 2nd Floor
Rockville, MD 20850 USA
www.aviationtoday.com/rw
BOOTH # 3-D145
PRODUCTS AND SERVICES: PUBLISHING
Rotor and Wing is the one-stop business intelligence source for those who own and
operate rotorcraft throughout the world. We deliver insight into and analysis of new
aircraft, products and technologies, regulations, safety, maintenance and other issues that
impact commercial, military, government and public service sectors. Our community gains
the competitive edge that saves them time and money and keeps them abreast of key
market trends and developments.
80
BOOTH # 3-C106
PRODUCTS AND SERVICES: ELECTRICAL/ELECTRONIC ASSEMBLY, CABLE ASSEMBLIES/
TENSION REGULATORS, WIRE/WIRE ROPE/CABLE MARKING/WIRING HARNESSES/CABLE
ASSEMBLY
A certified woman owned small business (WOSB) that is ISO 9001:2008, AS9100 Rev C
and NADCAP certified for Aerospace and DoD circuit card assemblies, cable assemblies.
wiring harnesses, aircraft lighting and electronic box build. SARICA is a build-to-print,
electronic manufacturing services (EMS) provider that has been serving the Aerospace and
Defense and Space communities for the last 10 years. SARICA’s commitment to
excellence and exceptional customer service have earned it a reputation for delivering
affordable, high-quality products and services on-time, all of the time.
SEACAST, INC.
6130 31st Avenue NE
Marysville, WA 98271 USA
www.seacast.com
BOOTH # 3-E147
PRODUCTS AND SERVICES: CASTINGS
SeaCast produces investment castings in a wide variety of alloys and geometries to meet
the requirements of our aerospace customers. Cast materials include nickel-based
superalloys, stainless steels, aluminum and titanium alloys. SeaCast offers a complete
range of in-house support processes including design support, CNC machining, heat
treatment and nondestructive testing. SeaCast is AS9100 and NADCAP certified.
970 East 64th Street
Cleveland, OH 44103 USA
www.sifco.com
BOOTH # 3-DE145
PRODUCTS AND SERVICES: FORGING, MACHINING
Headquartered in Cleveland Ohio SIFCO is a leading aerospace forged & machined
part solutions provider for Airframe, Landing Gear & Engine Components. SIFCO’s global
footprint includes components on all major Commercial, General Aviation and Military
programs. Materials forged include: Nickel, Superalloys, Titanium, Aluminum, Alloy &
Stainless Steels. Die forgings produced range from 1lb to 2,000lbs. SIFCO is AS9100,
ISO9001 & NADCAP approved.
SILICON FOREST ELECTRONICS
6204 E. 18th Street
Vancouver, WA 98661 USA
siliconforestelectronics.com
BOOTH # 3-E147
PRODUCTS AND SERVICES: ELECTRICAL/ELECTRONIC ASSEMBLY,
ELECTROMECHANICAL AND MECHANICAL ASSEMBLY
Silicon Forest Electronics is an AS9100C certified provider of Electronics Manufacturing
Services to the aerospace, defense and unmanned systems industries. We provide full
turnkey project management and contract manufacturing services to build your next
printed circuit board assembly or electro-mechanical sub-assembly, including rapid
prototyping and “legacy” program support. Making a Positive and Profound Impact.
81
EXHIBITOR PROFILES
SARICA MANUFACTURING COMPANY
240 W. Twain Avenue
Urbana, OH 43078 USA
www.saricamfg.com
EXHIBITOR PROFILES
SNK AMERICA, INC.
1150 Feehanville Drive
Mt. Prospect, IL 60056 USA
www.snkamerica.com
BOOTH # 3-A94
PRODUCTS AND SERVICES: PRECISION MACHINING/ENGINEERING, AEROSPACE
SERVICES, LANDING GEAR/SYSTEMS/COMPUTERS/TYRES
SNK, Niigata or SNK Nissan machine tool, you are ensured of getting world-class Japanese
technology and excellence in design, Quality and Reliability. The SNK family of machine
tools covers a wide range - from Double Column Machining Centers, 5-axis Profilers and
Horizontal Machining Centers to Planer Type Boring Mills. So whatever your industry Aerospace, Energy, Construction or Transportation - SNK can supply virtually any type of
machine to meet your manufacturing requirements.
SOUTHEAST ALABAMA GAS DISTRICT
445 Dexter Avenue, 5th Floor
www.seagd.net
BOOTH # 3-E128
STATE OF ILLINOIS - DCEO
100 West Randolph Street, Suite 3-400
Chicago, IL 60601 USA
www.invest-in-usa.org/illinois
BOOTH # 3-C128
PRODUCTS AND SERVICES: GOVERNMENT/GOVERNMENT AGENCY, ECONOMIC
DEVELOPMENT
Illinois - The State of Innovation. DCEO is the State’s leading agency for economic
development. Its Office of Trade and Investment, which has 9 foreign offices
throughout the world, provides trade and foreign direct investment services to companies
seeking to do business from Illinois and in the U.S. Illinois has the 5th largest economy. Its
aerospace indsutry employs 80,000 workers and home to Tier 1 companies such as
Hamilton Sunstrand and Woodward as well as 190+ Tier 2 and 3 companies. Chicago is
home to Boeing. Ten Illinois companies will be on our stand. Please come visit us.
STATE OF MISSOURI
301 West High Street, Suite 720
Jefferson City, MO 65101 USA
www.exportmissouri.mo.gov
BOOTH # 3-A135
Since the trans-Atlantic flight of the Spirit of St. Louis, through the US space program to
the innovative designs of McDonnell Douglas and Boeing Defense, The State of Missouri
has been a center of leadership in aviation. Missouri companies continue to break new
ground in aviation and advanced manufacturing, ensuring strength for the US and global
aviation industry for years to come.
82
EXPERTS IN FLIGHT SINCE
THE DAY WE INVENTED IT.
DISCOVER WHY ORGANIZATIONS LIKE GENERAL DYNAMICS, GE,
AND LOCKHEED MARTIN DO BUSINESS IN OHIO. VISIT HALL 3 C106.
For over 100 years, Ohio has been building an advanced research and development system, a robust logistical
network, and a knowledge-rich workforce committed to advancing the aerospace and aviation industries.
That’s why so many companies have found success in Ohio.
And it’s why your business can too.
EXHIBITOR PROFILES
STATE OF OHIO
41 S High Street, #1500
Columbus, OH 43215 USA
www.jobs-ohio.com
BOOTH # 3-C106
Ohio is the birthplace of aviation and the ideal environment to build on that heritage of
innovation! We are the #1 supplier state to The Boeing Company and Airbus; the
undisputed leader in aircraft engine manufacturing and development; the leading global
supplier to the world’s major aerospace, aviation, and defense OEMs; and Ohio offers one
of a kind, world-unique federal, academic, and non-profit installations and assets that are
dedicated to the advancement of air and space.
STATE OF UTAH
60 East South Temple, 3rd Floor
Salt Lake City, UT 84111 USA
www.business.utah.gov
BOOTH # 3-C98
PRODUCTS AND SERVICES: COMPOSITE MATERIALS/MANUFACTURE,
GOVERNMENT/GOVERNMENT AGENCY, UNMANNED AERIAL VEHICLES (UAV)
Utah has a rich history in the Aviation & Aerospace industries and is one of the top states
in the nation in the concentration of aerospace employment. Utah’s core aerospace and
aviation competencies include composites and advanced materials, propulsion systems,
avionics, and control systems. Aerospace and aviation companies within the State include
the full-spectrum of the industry; from design and manufacturing to advanced space
systems and regional air service, from repair and maintenance to software and control
systems.
STAUDER TECHNOLOGIES
114 Mexico Court
St. Peters, MO 63376 USA
www.staudertech.com
BOOTH # 3-A135
PRODUCTS AND SERVICES: DEFENCE SYSTEMS EQUIPMENT, AVIONIC EQUIPMENT/
SYSTEMS/INTEGRATION, COMMUNICATION SYSTEMS/EQUIPMENT
Stauder Technologies has long recognized the transformational move toward a
dynamic digital world along with the associated need for a common operating picture
for worldwide users in a networked environment. Our key focus is on simplifying the
users’ experience within this new digital framework by offering turn-key interoperable
solutions to facilitate reliable and secure communications and access across a broad
spectrum of systems and platforms.
SYBERJET AIRCRAFT
526 North Aviation Way
Cedar City, UT 84721 USA
www.syberjet.com
BOOTH # 3-C98
84
BOOTH # 3-C106
PRODUCTS AND SERVICES: ELECTRICAL CABLE ACCESSORIES/ELECTRICAL
HARNESSES, COMPOSITE MATERIALS/MANUFACTURE, CONNECTOR ACCESSORIES/
CONNECTORS
Syscom Advanced Materials was formed to develop, manufacture and market high
performance conductive fibers currently demanded in the marketplace. The company
is known for innovative technology and unique conductive fibers based on PBO, LCP,
Stainless Steel and other high performance materials. In its short history, Syscom has
become a leader in providing materials to the aerospace and other demanding
industries with products designed to meet the most technical design and application
environments. Syscom is AS9100 REV C and ISO 9001:2008 certified.
TACTAIR FLUID CONTROLS
4806 West Taft Road
Liverpool, NY 13088 USA
www.tactair.com
BOOTH # 3-A117
TEAM VOLUSIA EDC
One Daytona Boulevard , Suite 240
Daytona Beach, FL 32114 USA
www.teamvolusiaedc.com
BOOTH # 3-A80
Team Volusia EDC is dedicated to advancing economic prosperity for Volusia County
and the Greater Daytona Area. The Greater Daytona Area, situated at the crossroads
of Interstates 95 and 4, is home to over 400 manufacturers and the Daytona Beach
International Airport, offering businesses connectivity to major cities around the
world. Embry-Riddle Aeronautical University is one of five major universities to call
Volusia County home. Developable sites are within close proximity to rail service and
located approximately one hour of Jax Port and Orlando International Airport.
TECT AEROSPACE
300 W Douglas Avenue, Suite 100
www.tectcorp.com
CHALET NO. 4
TECT is a group of privately held companies comprised of two business units that
serve the aerospace and power generation industries. TECT Power manufactures
critical rotating and non-rotating components for turbine engines. Customers include
GE, Pratt and Whitney, Rolls-Royce, Snecma and others. The second business unit,
TECT Aerospace, serves the airframe market by manufacturing complex assemblies
and components. TECT Aerospace customers include Boeing, Spirit, Airbus and
Lockheed Martin.
TENNESSEE VALLEY AUTHORITY
460 Corporate Drive, Ste 125F, COP 1A-HNA
www.tvaed.com
BOOTH # 3-E128
85
EXHIBITOR PROFILES
SYSCOM ADVANCED MATERIALS, INC.
1305 Kinnear Road
www.metalcladfibers.com
EXHIBITOR PROFILES
THE GILL CORPORATION
4056 Easy Street
El Monte, CA 91731 USA
www.thegillcorp.com
BOOTH # 3-C131
PRODUCTS AND SERVICES: COMPOSITE MATERIALS/MANUFACTURE, FABRICATED
STRUCTURE - OTHER, PRECISION MACHINING/ENGINEERING
THE MIAMI-DADE BEACON COUNCIL
80 SW 8th Street, Suite 2400
Miami, FL 33130 USA
www.beaconcouncil.com
BOOTH # 3-A80
The Beacon Council is Miami-Dade County’s official economic development organization.
Our mission is to increase jobs and investment in Miami-Dade County. We market MiamiDade as a world-class business location, grow local companies and shape Miami-Dade’s
economic future. Our vision is to market Miami as a world-class 21st century city. Since its
creation, The Beacon Council has assisted more than 900 companies, creating more than
63,000 direct jobs and adding more than $4.15 billion in new capital investment. For more
information, visit www.beaconcouncil.com
THE OHIO STATE UNIVERSITY
2070 Neil Avenue, 122 Hitchcock Hall
www.engineering.osu.edu
BOOTH # 3-C106
PRODUCTS AND SERVICES: EDUCATION/TRAINING, AEROSPACE SERVICES
Ohio State’s College of Engineering strives to foster a learning culture that prepares
students to be key contributors to society through their technological, professional and
personal skills. In addition to being an innovative leader in engineering education, we
endeavor to fulfill our university’s land-grant mission of advancing Ohio’s economic
mobility, competitiveness and standard of living through our contributions toward
technology and creativity, continuous improvement, a diverse workforce and lifelong
learning.
THE STATE OF SOUTH CAROLINA
1201 Main Street, Suite 1600
Columbia, SC 29201 USA
www.SCcommerce.com
BOOTH # 3-C158
PRODUCTS AND SERVICES: GOVERNMENT/GOVERNMENT AGENCY, RECRUITMENT
Steeped in history and tradition from the coast to the mountains, South Carolina offers
natural beauty, world-renowned events, a low cost of living and an unparalleled location.
Strategically set half way between New York and Miami, South Carolina is centrally located
on the U.S. East Coast, offering unparalleled transportation opportunities. From its market
access to its nationally recognized workforce to its strength in research and development,
South Carolina provides the advantage businesses need to compete in the global
economy.
86
BOOTH # 3-D116
THE UNIVERSITY OF ALABAMA
401 Queen City Avenue
Tuscaloosa, AL 35401 USA
www.ua.edu
BOOTH # 3-E128
TRANSAERO INC.
35 Melville Park Road, Suite 100
Melville, NY 11747 USA
www.transaeroinc.com
BOOTH # 3-A82
PRODUCTS AND SERVICES: AIRCRAFT/SYSTEMS & EQUIPMENT, HEADSETS/HELMETS,
SPARE PARTS
For 60 years, Transaero has been recognized as a leading technical sales, marketing and
stocking distribution company in support of engineered products to commercial airline, life
support and military markets worldwide. Transaero is a world leader in supplying personnel,
safety and survival equipment to commercial and military customers. We represent leading
manufacturers of products and systems for the aviation community. For more information
about Transaero Inc., visit us at www.transaeroinc.com.
TRICOR ALLOYS
3225 W. Old Lincoln Way
Wooster, OH 44691 USA
www.tricormetals.com
BOOTH # 3-C106
TUSCALOOSA COUNTY IDA
2204 University Boulevard
Tuscaloosa, AL 35403 USA
www.tcida.com
BOOTH # 3-E128
U.S. DEPARTMENT OF
DEFENSE SECURITY COOPERATION
2800 Defense Pentagon
Washington, DC 20301-2800 USA
www.DSCA.mil
BOOTH # 3-B117
PRODUCTS AND SERVICES: AIRCRAFT/MANUFACTURING, MISSILE SYSTEMS,
COMMUNICATION SYSTEMS/EQUIPMENT
Foreign Military Sales is the primary means the U.S. Government (USG) sells defense
articles, services, & training to partners. FMS operates on a “no-profit” and “no-loss”
basis allowing partners to purchase from the USG using the Department of Defense’s
(DoD) acquisition process. The Defense Security Cooperation Agency (DSCA) is the DoD
lead with subject-matter expertise spanning the spectrum of security cooperation activities
to include policy, financial, legal, legislative, programmatic, and weapons systems experts.
The military services are the implementing agencies on behalf of DSCA.
87
EXHIBITOR PROFILES
THE TIMKEN COMPANY
2 rue Timken
Colmar, 68002 France
www.timken.com
EXHIBITOR PROFILES
U.S. EMBASSY - U.S. COMMERCIAL SERVICE
2, avenue Gabriel
Paris, 75008 France
www.export.gov
BOOTH # 3-E97
Global Markets is the trade promotion arm of the U.S. Department of Commerce. Our
office at the American Embassy in France is part of a network that includes offices in
more than 100 U.S. cities and 70 countries across the globe. Global Markets offers U.S.
companies exporting information, advice and cost-effective end-to-end international
business solutions. Our specialists match U.S. companies with international business
partners and opportunities. We also assist non-American companies to source U.S.
products.
180 Lamar Haley Parkway
Canton, GA 30114 USA
www.universalalloy.com
BOOTH # 3-B98
PRODUCTS AND SERVICES: SURFACE FINISHING/TREATMENT, MACHINING,
AIRCRAFT/MANUFACTURING
Located with two facilities in the USA, one in Romania and one in Switzerland, UAC is the
world’s second largest manufacturer of aluminum aerospace extrusions. UAC’s vertically
integrated value chain offers our customers tailor-made solutions that provide measurable
added value. UAC’s value chain solutions include research and development focusing on
state-of-the-art aluminum alloy systems, highly engineered extrusions, machined detail
parts, surface treatment, kitting, and assembly of aerostructures.
BOOTH # 3-E107
UNIVERSAL STAINLESS
600 Mayer Street
Bridgeville, PA 15367 USA
www.univstainless.com
PRODUCTS AND SERVICES: SPECIALTY METALS, SUPERALLOYS, MATERIALS &
COMPONENTS
Universal Stainless is a producer of semi-finished and finished specialty steel long products
including nickel alloy, stainless steel and aircraft quality low alloy steels, in a wide variety
of grades and product forms. Our products, sold to service centers, forgers, and original
equipment manufacturers, are further processed by our customers for use in a variety of
industries, including aerospace, power generation and oil & gas. Our specialty bar facilities
have one of the broadest and diverse size range and product capabilities in the industry.
88
A Global Leader in the Manufacture
of Aerospace Products
When it comes to
hard alloy extrusions,
there is no better source than
Universal Alloy
Corporation
Please stop by and visit us:
US Pavilion - Booth Number B-98 Located in Hall 3
World-class people offering world-class products
O]j]cfgofYjgmf\l`]_dgZ]^gjgmjà_`%klj]f_l``Yj\YddgqYdmeafme
]pljmkagfkoal`l`]la_`l]kl\ae]fkagfYdlgd]jYf[]kYnYadYZd]&G^[gmjk]$
[mklge]jkYdkgljmklmk^gjhj][akagfeY[àfaf_$à_`%imYdalqYkk]eZdq$
Yf\kmh]jagjkmj^Y[]lj]Yle]fl$Yko]dd&LggmjhYjlf]jkafYaj[jY^l
structures and other industries where precision-engineered products are
[jala[Yd$o]Y[lYkY\aj][l%kYd]keYfm^Y[lmj]joal`klg[caf_oYj]`gmk]
[YhYZadala]k$g^^]jaf_l`]k`gjl]kld]Y\%lae]afl`]af\mkljq&
O]Yj])$*((h]ghd]Yll`j]]^mddqafl]_jYl]\eYfm^Y[lmjaf_dg[Ylagfk
_dgZYddqogjcaf_lg_]l`]jYkgf]lghd]Yk]gmj[mklge]jk&
UFAN=JK9D9DDGQ&;GE9F9@=AE20((%++)%///*;9FLGF2000%,/1%/*+(JGE9FA92((,(*.**(*++(
EXHIBITOR PROFILES
UNIVERSITY OF CINCINNATI
745 Baldwin Hall
Cincinnati, OH 45221 USA
www.ceas.uc.edu/aerospace.html
BOOTH # 3-C106
PRODUCTS AND SERVICES: RESEARCH & DEVELOPMENT/CONSULTANCY, PROJECT
MANAGEMENT, EDUCATION / TRAINING
University of Cincinnati’s undergraduate Aerospace Engineering program educates and
trains students in contemporary aerospace through classroom instruction and professional
practice embodied in the cooperative educational experience. This department frequently
partners with University of Cincinnati Research Institute to help businesses tap into the
world class expertise and resources found at UC. UCRI is a separate organization from the
University, but closely affiliated and well-connected, offering a one-stop shop experience.
UNIVERSITY OF SOUTH ALABAMA
307 N. University Boulevard
www.southalabama.edu
BOOTH # 3-E128
VACCO INDUSTRIES
10350 Vacco Street
El Monte, CA 91733 USA
www.vacco.com
BOOTH # 3-B82
PRODUCTS AND SERVICES: ENGINEERED SYSTEMS & PRODUCTS, AIRCRAFT/SYSTEMS
& EQUIPMENT, FILTERS/FILTRATION
VACCO specializes in design and production of engineered fluid controls for humanrated, long duration and expendable space applications. Proven Valves, Regulators, Filters,
Couplings, Refueling Mechanisms, Welded Manifolds, and highly-integrated ChEMS™
Modules are available for applications ranging from cryogenic to high pressure and
hazardous propellants. Reliable heritage-intelligent solutions.
VIRGINIA ECONOMIC DEVELOPMENT PARTNERSHIP
901 E. Byrd Street, 19W
Richmond, VA 23219 USA
www.ExportVirginia.org
BOOTH # 3-D132
VOSS INDUSTRIES
2168 West 25th Street
Cleveland, OH 44113 USA
www.vossind.com
BOOTH # 3-B81
90
BOOTH # 3-E147
PRODUCTS AND SERVICES: GOVERNMENT/GOVERNMENT AGENCY, AEROSPACE
SERVICES, TRADE FINANCE
Let Washington State’s business experts help you seize new opportunities for supply chain
introductions, partnerships and investment in one of the world’s largest and most
advanced aerospace clusters. Notre équipe d’experts se tient à votre disposition pour vous
aider à saisir de nouvelles opportunités de croissance, de partenariat et d’investissement
pour votre entreprise au sein d’une des chaines d’approvisionnement aéronautique les
plus compétitives au monde.
WESTSTAR PRECISION
1130 Classic Road
Apex, NC 27539 USA
www.weststarprecision.com
BOOTH # 3-B94
WHITCRAFT LLC
76 County Road, PO Box 128
Eastford, CT 06242 USA
www.whitcraft.com
BOOTH # 3-B118
WICHITA, KANSAS USA
AIR CAPITAL OF THE WORLD
1000 SW Jackson, Suite 100
Topeka, KS 66612 USA
www.KansasCommerce.com/KBIZ
BOOTH # 3-A159
PRODUCTS AND SERVICES: ECONOMIC DEVELOPMENT, GOVERNMENT/GOVERNMENT
AGENCY
Kansas offers an exceptional operating environment for the aviation industry. Our unique
aerospace cluster includes Airbus, Textron Aviation (Cessna and Beechcraft), Bombardier
Learjet, Spirit AeroSystems and over 200 aviation-related suppliers benefitting from a large
pool of experienced skilled aircraft workers, customized training resources, and world-class
research facilities. Kansas offers comprehensive site location assistance to firms interested
in expanding in the U.S. Qualified Kansas suppliers can meet the needs of aviation
customers around the world.
WOODWARD, INC.
5001 N. Second Street
Loves Park, IL 61111 USA
www.woodward.com
BOOTH # 3-D82
PRODUCTS AND SERVICES: AIRCRAFT SYSTEMS, ENGINE COMPONENTS/CONTROLS,
MAINTENANCE/OVERHAUL
91
EXHIBITOR PROFILES
WASHINGTON STATE DEPARTMENT OF COMMERCE
2001 Sixth Avenue, Suite 2600
Seattle, WA 98121 USA
www.choosewashingtonstate.com
EXHIBITOR PROFILES
WORLD TRADE CENTER ARKANSAS
3300 Market Street, Suite 400
Rogers, AR 72758 USA
www.arwtc.org
BOOTH # 3-E106
The ARWTC brings together businesses and governmental agencies involved in foreign
trade to further the economic outlook for the state.
YARDE METALS
45 Newell Street
Southington, CT 06489 USA
www.yarde.com
BOOTH # 3-D131
PRODUCTS AND SERVICES: AEROSPACE METAL STOCKHOLDING, ALUMINUM PLATE,
METAL/METAL FABRICATION & ASSEMBLY/MATERIALS ANALYSIS
Yarde Metals is a global distributor and processor of aircraft quality aluminum and
stainless. Our commitment to quality is reflected in our ISO 9001:2008 & AS9100 REV C
certifications. Yarde has 16 locations strategically located throughout the U.S. and a
dedicated export division to support our global customers. We are an approved supplier to
Airbus/EADS, BE Aerospace, Boeing, Bombardier, Lockheed Martin, UTC Group, Spirit
Aerosystems and the Kaman Group among others. www.yarde.com.
92
Your global partner for expert
aviation data, news and insight
FLEETS | VALUES | SCHEDULES | AIRLINES | AIRPORTS
www.flightglobal.com
________________
EXHIBITOR PRODUCTS
& SERVICES INDEX
PRODUCTS & SERVICES INDEX
EXHIBITOR PRODUCTS & SERVICES INDEX
ACCESSORIES
t FLG TECHNICS
t GALLEY SUPPORT INNOVATIONS
AIRCRAFT SYSTEMS
t MAROTTA CONTROLS, INC.
t WOODWARD, INC
ACTUATORS/ACTUATION SYSTEMS
t AEROSPACE PRECISION, INC.
t CIRCOR AEROSPACE & DEFENSE
t CRISSAIR, INC.
t INGENIUM TECHNOLOGIES
t ITT AEROSPACE CONTROLS
t ITT CORPORATION
AIRCRAFT TESTING EQUIPMENT
t ESCO FLUID CONTROLS
AIRCRAFT/MANUFACTURING
t AERO VIRONMENT, INC.
t DISCOVERY AVIATION, INC.
t ENSTROM HELICOPTER
CORPORATION
t FLUID FORMING TECHNOLOGIES
t GULFSTREAM AEROSPACE
CORPORATION
t KAMAN AEROSPACE GROUP
t PCC AIRFRAME PRODUCTS
t U.S. DEPARTMENT OF DEFENSE
SECURITY COOPERATION
t UNIVERSAL ALLOY CORPORATION
AERONAUTICS, MISSILES
& FIRE CONTROLS
t PARADIGM SRP
AEROSPACE METAL STOCKHOLDING
t BRALCO METALS
t DIRECT ALLOYS LLC
t FUTURE METALS LLC
t HADCO METAL TRADING. LLC.
t PRECISION ALLOY SERVICES, INC.
t ROLLED ALLOYS
t YARDE METALS
AIRCRAFT/SYSTEMS & EQUIPMENT
t CRISSAIR, INC.
t HARLOW AERO STRUCTURES LLC
t NMG AEROSPACE
t RIX INDUSTRIES
t TRANSAERO INC.
t VACCO INDUSTRIES
AEROSPACE SERVICES
t AEROPROBE CORPORATION
t AIP AEROSPACE
t BILL AND HILLARY CLINTON
NATIONAL AIRPORT
t DERCO AEROSPACE, INC.
t SNK AMERICA, INC.
t THE OHIO STATE UNIVERSITY
t WASHINGTON STATE
AIRFLOW MEASURING TEST
EQUIPMENT
t COBRA SYSTEMS, INC
AIRFRAME COMPONENTS
t AIRGROUP DYNAMICS
t C.E. MACHINE CO, INC.
t COMPOSITE ENGINEERING, INC
t DENISON INDUSTRIES
t EMINENCE MANUFACTURING
INCORPORATED
t GENERAL DYNAMICS ORDNANCE
AND TACTICAL SYSTEMS
t HARLOW AEROSTRUCTURES LLC
t HONEYCOMB COMPANY OF
AMERICA, INC.
t PCC AIRFRAME PRODUCTS
t PCX AEROSTRUCTURES
AIRCRAFT ENGINEERING & DESIGN
AIRCRAFT ENGINES
t PTI TECHNOLOGIES INC.
AIRCRAFT LIGHTING
t AERO PRECISION - A GREENWICH
AERO GROUP COMPANY
t AIRCRAFT LIGHTING INT’L
t ASTRONICS CORPORATION
AIRCRAFT MODIFICATIONS
t NORTH STATE AVIATION
ALUMINIUM PLATE
t BRALCO METALS
t HADCO METAL TRADING. LLC.
t YARDE METALS
AIRCRAFT OVERHAUL &
REPAIR STATIONS
t AAR INTERNATIONAL
t AIRGROUP DYNAMICS
t NORTH STATE AVIATION
AIRCRAFT SALES/LEASING/CHARTERS
t GULFSTREAM AEROSPACE
CORPORATION
96
ANTENNAS/ANTENNA SYSTEMS
t PANASONIC AVIONICS
CORPORATION
ANTI-VIBRATION SYSTEMS
t ESSEX INDUSTRIES
t ITT CORPORATION
t ITT ENIDINE
ASSET LIQUIDATION/TRACKING
t INDUSTRIAL MACHINE TOOL, INC.
ASSOCIATIONS /
GOVERNMENT AGENCIES
t HELICOPTER ASSOCIATION
INTERNATIONAL
AVIATION PRODUCT SUPPORT
NATIONAL AIRPORT
AVIONICS REPAIR & OVERHAUL/
SUPPORT
BEARINGS
t NATIONAL PRECISION BEARING
GROUP OF MECHATRONICS, INC
BODY ARMORS
t NANOMECH, INC.
CABLE ASSEMBLIES/TENSION
REGULATORS
t HARCO
t LOOS & CO., INC.
t SARICA MANUFACTURING COMPANY
CALIBRATION EQUIPMENT/SERVICES
CARBON FIBRE
CASTINGS
t NBM METALS
t PARADIGM PRECISION
t PCC STRUCTURALS, INC.
t SEACAST, INC.
COATINGS
t CINCINNATI THERMAL SPRAY, INC.
COMMUNICATION SYSTEMS/
EQUIPMENT
t AVIONICA, INC.
t ICG (INTERNATIONAL
COMMUNICATIONS GROUP, INC.)
t ROGERSON KRATOS/INTHEAIRNET
t STAUDER TECHNOLOGIES
COMPONENT REPAIR/OVERHAUL
t AERONAUTICAL SYSTEMS, INC
t HARCO
t MIDWEST AERO SUPPORT, INC
COMPOSITE MATERIALS/
MANUFACTURE
t AGC ACQUISITION
t COMPOSITES HORIZONS
t EDAC TECHNOLOGIES
t FLG TECHNICS
t MET PLASTICS, INC.
t RENEGADE MATERIALS
CORPORATION / MAVERICK
CORPORATION
t STATE OF UTAH
t SYSCOM ADVANCED MATERIALS, INC.
t THE GILL CORPORATION
CONNECTOR ACCESSORIES/
CONNECTORS
t ITT CORPORATION
t ITT INTERCONNECT SOLUTIONS ITT CANNON
CONSULTANCY SERVICES
t FORECAST INTERNATIONAL
t JET INFORMATION SERVICES, INC.
t NORTH CAROLINA - ECONOMIC
t PARTSBASE, INC.
CHEMICALS & RELATED PRODUCTS
t HANGSTERFER’S
97
ANTI-CORROSION
TREATMENTS/SYSTEMS
DATA RECORDERS/DATA
ACQUISITION/ANALYSIS/PROCESSING
t AVIONICA, INC.
ELASTOMERIC MOUNTS/
PRODUCTS/SEALS
t ITT ENIDINE
DEFENE SYSTEMS EQUIPMENT
t CHOCTAW DEFENSE
t STAUDER TECHNOLOGIES
ELECTRICAL CABLE ACCESSORIES/
ELECTRICAL HARNESSES
t AMERICAN PRECISION ASSEMBLERS,
INC
t DELTA INTERNATIONAL INC
t DUCOMMUN INCORPORATED
DEFENSE TECHNOLOGY
t IMSAR LLC
DESIGN/ANALYSIS/CONSULTANCY
t HASKELL
t RAPID GLOBAL BUSINESS SOLUTIONS
INC [RGBSI]
DISTRIBUTION
AEROGROUP COMPANY
t AEROGROUP COMPANY
t MAC AEROSPACE CORP.
ELECTRICAL/ELECTRONIC ASSEMBLY
t AMERICAN STANDARD CIRCUITS
t SILICON FOREST ELECTRONICS
ECOMMERCE SOLUTIONS/
MARKETPLACE/E LEARNING
t PARTSBASE, INC.
t ARKANSAS AEROPLEX
t CONNECTICUT DEPARTMENT OF
ECONOMIC AND COMMUNITY
DEVELOPMENT
t GREATER WICHITA ECONOMIC
DEVELOPMENT COALITION
t HASKELL
t INDIANA ECONOMIC DEVELOPMENT
CORPORATION / PURDUE
UNIVERSITY
t MISSISSIPPI, USA
t NCEAST ALLIANCE
t PURDUE UNIVERSITY - PURDUE
RESEARCH FOUNDATION
t STATE OF ILLINOIS - DCEO
t STATE OF OHIO
t TEAM VOLUSIA EDC
t THE MIAMI-DADE BEACON COUNCIL
t WICHITA KANSAS USA- AIR CAPITAL
OF THE WORLD
EDM
t ACUTEC PRECISION MACHINING INC
EDUCATION / TRAINING
t EMBRY-RIDDLE AERONAUTICAL
UNIVERSITY
RESEARCH FOUNDATION
t THE OHIO STATE UNIVERSITY
t UNIVERSITY OF CINCINNATI
ELECTRICAL EQUIPMENT/SYSTEMS
t AIRCRAFT LIGHTING INT’L
t AMERICAN STANDARD CIRCUITS
t ASTRONICS CORPORATION
t FLAME ENTERPRISES INC. INC.
ELECTRO-MECHANICAL EQUIPMENT
INC
t FLAME ENTERPRISES INC.
ELECTRO-OPTICS
t GYRO-STABILIZED SYSTEMS
ELECTROMECHANICAL AND
MECHANICAL ASSEMBLY
t ASCENT AEROSPACE
t FLAME ENTERPRISES INC.
t MARVIN GROUP
t SILICON FOREST ELECTRONICS
ELECTRON BEAM WELDING
t EDAC TECHNOLOGIES
ENGINE COMPONENT OVERHAUL
t FIRST AVIATION SERVICES INC.
t NORDAM
ENGINE COMPONENTS/CONTROLS
AEROGROUP COMPANY
t EDAC TECHNOLOGIES
t WOODWARD, INC
ENGINEERED SYSTEMS & PRODUCTS
t AVIBANK MANUFACTURING, INC.
t HARCO
t NOVA-TECH ENGINEERING
t VACCO INDUSTRIES
98
ENGINEERING SUPPORT
ENGINES/AIRCRAFT
t GMS CORPORATION
FABRICATED STRUCTURE - BODY
t BERTSCHE ENGINEERING
CORPORATION
t CET AEROSPACE
FABRICATED STRUCTURE - OTHER
t AIP AEROSPACE
t ASCENT AEROSPACE
t CET AEROSPACE
FABRICATED STRUCTURE - WING
t CET AEROSPACE
FABRICATION & ASSEMBLY
METAL FORMING
t AIP AEROSPACE
t CAMBRIDGE VALLEY MACHINING,
INC.
t FLUID FORMING TECHNOLOGIES
t IMC/IMCI AEROSPACE GROUP
t ORION INDUSTRIES
t PARADIGM PRECISION
t PIONEER INDUSTRIES
FASTENERS
t AVIBANK MANUFACTURING, INC.
t BRISTOL INDUSTRIES
t DELTA INTERNATIONAL INC
t RELLI TECHNOLOGY, INC
FILTERS/FILTRATION
t VACCO INDUSTRIES
FLEXIBLE HOSES/JOINTS/CIRCUITS
FLIGHT CONTROL SYSTEM/SWITCHES
t ESSEX INDUSTRIES
FORGING
t IMT FORGE GROUP, CLIFFORDJACOBS FORGING
t MATTCO FORGE INC.
t SIFCO INDUSTRIES INC.
FUEL/FUEL SYSTEMS
t ARKANSAS AEROPLEX
t AUSCO, INC.
GEARS & GEAR BOXES/GEAR CUTTING
t AERO GEAR INC.
GOVERNMENT/GOVERNMENT AGENCY
t ARKANSAS ECONOMIC
DEVELOPMENT COMMISSION
t BUSINESS OREGON
t CONNECTICUT DEPARTMENT OF
ECONOMIC AND COMMUNITY
DEVELOPMENT
t MONROE-UNION COUNTY
t OKLAHOMA DEPARTMENT OF
COMMERCE
t STATE OF ILLINOIS - DCEO
t STATE OF MISSOURI
t STATE OF UTAH
t THE STATE OF SOUTH CAROLINA
t U.S. EMBASSY - U.S. COMMERCIAL
SERVICE
t VIRGINIA ECONOMIC DEVELOPMENT
PARTNERSHIP
t WASHINGTON STATE
t WICHITA KANSAS USA- AIR CAPITAL
OF THE WORLD
t WORLD TRADE CENTER ARKANSAS
GROUND HANDLING/GROUND
SUPPORT EQUIPMENT
t JBT CORPORATION
HANGAR SPACE
t FRANKFURT-SHORT-BRUZA
ASSOCIATES, P.C. (FSB)
HEADSETS/HELMETS
t TRANSAERO INC.
HEAT EXCHANGERS
t AEROSPACE ALLOYS, INC.
HEAT TREATMENT
t IPSEN INTERNATIONAL GMBH
HELICOPTER PARTS
t EMINENCE MANUFACTURING, INC.
t ENSTROM HELICOPTER
CORPORATION
99
ENGINEERING AND CONSULTANCY
t RAPID GLOBAL BUSINESS
SOLUTIONS INC [RGBSI]
t RENO MACHINE COMPANY
HYDRAULIC COMPONENTS/SYSTEMS/
TOOLS/TESTING
t AEROFIT LLC
t AIRGROUP DYNAMICS
t AUSCO, INC.
t CRISSAIR, INC.
t NMG AEROSPACE
t PRECISION SENSORS DIVISION
t
t
t
t
t
t
t
t
t
t
IN-FLIGHT ENTERTAINMENT
t ICG (INTERNATIONAL
COMMUNICATIONS GROUP, INC.)
CORPORATION
t ROGERSON KRATOS/INTHEAIRNET
MAINTENANCE/OVERHAUL
t AAR INTERNATIONAL
t FRANKFURT-SHORT-BRUZA
ASSOCIATES, P.C. (FSB)
t WOODWARD, INC
INFORMATION PROVIDER
MANUFACTURING & PROCESSING
EQUIPMENT
t AIP AEROSPACE
t ASCENT AEROSPACE
CORPORATION
t CR ONSRUD, INC.
t FLOW AEROSPACE
t INDUSTRIAL MACHINE TOOL, INC.
t INGERSOLL MACHINE TOOLS, INC
t IPSEN INTERNATIONAL GMBH
t MIDWEST AERO SUPPORT, INC
INTERCONNECTION SYSTEMS
INTERIORS/AIRCRAFT INTERIORS
ITT ENIDINE
NORDAM
LANDING GEAR/SYSTEMS/
COMPUTERS/TYRES
t NBM METALS
t SNK AMERICA, INC.
MARKETING/MARKET RESEARCH
t PARTSBASE, INC.
LEASING & FINANCE
NATIONAL AIRPORT
LOGISTICS/WAREHOUSING/
DISTRIBUTION
t HASKELL
LUBRICANTS
t HANGSTERFER’S
t NANOMECH INC
MACHINING
t ACCURUS AEROSPACE CORPORATION
INC.
t CR ONSRUD, INC.
t FLOW AEROSPACE
t GIVON USA, INC.
t IMPRESA AEROSPACE
JANEWAY MACHINE, INC. / JMI
INTERNATIONAL LLC
MET PLASTICS, INC.
NANOMECH INC
ORION INDUSTRIES
PARADIGM PRECISION
PERRYMAN COMPANY
100
t FUTURE METALS LLC
t INDUSTRIAL METALS
INTERNATIONAL LTD.
t PERRYMAN COMPANY
t PLYMOUTH ENGINEERED SHAPES /
PLYMOUTH TUBE CO.
CORPORATION
t ROLLED ALLOYS
t UNIVERSAL STAINLESS
MECHANICAL ASSEMBLIES
t ELECTRONIC HARDWARE CORP EHC
KNOBS
METAL FORMING METAL JOINING &
BONDING/MOLDINGS
t AGC ACQUISITION
PIONEER INDUSTRIES
METAL/METAL FABRICATION &
ASSEMBLY/MATERIALS ANALYSIS
t IMPRESA AEROSPACE
t NBM METALS
t PIONEER INDUSTRIES
t YARDE METALS
MISSILE SYSTEMS
NDT (NON DESTRUCTIVE TESTING)
OTHER
KNOBS
t FLOW AEROSPACE
OXYGEN & EMERGENCY SYSTEMS
t ESSEX INDUSTRIES
PRECISION MACHINING/
ENGINEERING
t AEROFIT LLC
CORPORATION
INC.
t EMINENCE MANUFACTURING INC.
t GIVON USA, INC.
t HARLOW AEROSTRUCTURES LLC
t RENO MACHINE COMPANY
t SNK AMERICA, INC.
PRESSURE SENSORS/CONTROLLERS,
ETC.
PROJECT MANAGEMENT
t DYNATECH INTERNATIONAL
PUBLISHING
t AVIONICS MAGAZINE
t HELICOPTER ASSOCIATION
INTERNATIONAL
t ROTOR & WING MAGAZINE
t
STATE OF UTAH
RECONNAISSANCE/SURVEILLANCE
SYSTEMS
t AEROVIRONMENT, INC.
t GENERAL ATOMICS AERONAUTICAL
SYSTEMS, INC.
t IMSAR LLC
RECRUITMENT
t RAPID GLOBAL BUSINESS SOLUTIONS
INC [RGBSI]
t THE STATE OF SOUTH CAROLINA
REPAIR/REPAIR & OVERHAUL
t FLG TECHNICS
CORPORATION
RESEARCH & DEVELOPMENT/
CONSULTANCY
RESEARCH FOUNDATION
SECURITY SOLUTIONS/SYSTEMS
SENSORS & TRANSDUCERS
t GMS CORPORATION
SHEET METAL FABRICATION &
ASSEMBLY
t AGC ACQUISITION
t GIVON USA, INC.
t IMPRESA AEROSPACE
t ORION INDUSTRIES
SPACE/SPACE SYSTEMS
SPARE PARTS
AMERICA, INC.
t TRANSAERO INC.
SPECIALIST FABRIC ASSEMBLY
t NOVA-TECH ENGINEERING
RADARS & RADOMES
t IMSAR LLC
101
t
t
t
SPECIALTY METALS
t DIRECT ALLOYS LLC
t FUTURE METALS LLC HADCO METAL
TRADING. LLC.
t INDUSTRIAL METALS
INTERNATIONAL LTD.
t PLYMOUTH ENGINEERED SHAPES /
PLYMOUTH TUBE CO.
t RENTON COIL SPRING CO.
t ROLLED ALLOYS
SPRINGS
t RENTON COIL SPRING CO.
t
t
t
t
t
t
t
DELTA INTERNATIONAL INC
FLOW AEROSPACE
HANGSTERFER’S
LOOS & CO., INC.
TRADE FINANCE
t WASHINGTON STATE
TRAINING
TRANSILLUMINATED CONTROL KNOBS
KNOBS
STEELS
t BRALCO METALS
t INDUSTRIAL METALS
INTERNATIONAL LTD.
TRANSPARENCIES
t NORDAM
STRUCTURES - FLIGHT SERVICES HEAT
AMERICA, INC.
TUBE BENDING & ASSEMBLY
TURBINE ENGINE COMPONENTS
t HAYNES INTERNATIONAL, INC.
CORPORATION
SUB-SYSTEMS & ENGINEERED
PRODUCTS
t AUSCO, INC.
t NMG AEROSPACE
SUPERALLOYS
t DIRECT ALLOYS LLC
t HAYNES INTERNATIONAL, INC.
SUPPLY CHAIN MANAGEMENT
t AAR INTERNATIONAL
t DELTA INTERNATIONAL INC.
t GMS CORPORATION
SURFACE FINISHING/TREATMENT
t UNIVERSAL ALLOY CORPORATION
TESTING & INSPECTION/TEST
FACILITIES/TEST EQUIPMENT
t AEROFIT LLC
UNMANNED AERIAL VEHICLES (UAV)
t AEROVIRONMENT, INC.
t GENERAL ATOMICS AERONAUTICAL
SYSTEMS, INC.
t RIX INDUSTRIES
t STATE OF UTAH
WEAPON CARRIAGE & RELEASE
t MARVIN GROUP
t PARADIGM SRP
t RIX INDUSTRIES
WEAPON INTERFACE
t PARADIGM SRP
WIRE/WIRE ROPE/CABLE MARKING/
WIRING HARNESSES/CABLE ASSEMBLY
INC
t LOOS & CO., INC.
TESTING EQUIPMENT AIRCRAFT
t MARVIN GROUP
TOOLS/TOOLING
t AIP AEROSPACE
t ASCENT AEROSPACE
t CR ONSRUD, INC.
102
NOTES
103
NOTES
_____________________________
______________________________
______________________________
_____________________________
______________________________
_____________________________
______________________________
______________________________
______________________________
______________________________
_____________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
______________________________
NOTES
NOTES
_____________________________
______________________________
______________________________
_____________________________
______________________________
_____________________________
______________________________
_____________________________
_____________________________
______________________________
_____________________________
_____________________________
_____________________________
_____________________________
______________________________
_____________________________
______________________________
_____________________________
______________________________
_____________________________
_____________________________
______________________________
______________________________
104
Assembly Line Integration, Automated Assembly and Machining,
and Industry Leading Tooling Solutions
World Class Partner With a Global Footprint
Ascent Aerospace is the leading provider of precision tooling,
composite waterjet machining systems, assembly automation, and
assembly line integration. We deliver turnkey solutions that enable
our customers to meet their demanding production schedules and to
overcome their cost challenges.
Ascent Tooling Group
• Coast Composites
• Odyssey Industries
• Global Tooling Systems
ascentaerospace.com
Ascent Integration & Automation Group
• Ascent Integration
• Brown Aerospace
• Flow Aerospace
Top: Assembly line
Lower Left: Automated
subassembly
Lower Right: Invar
wing skin molds
BOOTH 3-B109

Guide to U.S. International Pavilion 2015

Transcription

Similar documents

Columbia Facilities M aintenance Expo

Showcase Your Products - Fleamasters Fleamarket

No One Said You Need to Play Nice

ILA Conference Center, GOLF Thursday, 2 June 2016

April 23 25, 2013

SurvCon 2016 - New Jersey Society of Professional Land Surveyors

Guide to U.S. Exhibitors 2013

Club Quarters, Wacker at Michigan

IP Ports – Low Latency DRAMS

Speaker Biographies David Yoho