Full Catalog 05 - Raven Golf Clubs

Transcription

Configuring your TM-4300 Driver
This guide will help you set up your TM-4300 driver the way you want it! This is just a general idea,
as this driver can be set up many other ways depending on shaft lengths, grips, and personal
preferences.
Draw Bias
Low Trajectory
8
NOTE: The TM-4300
Tour Spec Driver comes
with 12 weights, and by
utilizing the different
weights you can
customize your drivers
swingweight as well as
the shot pattern.
Switching weights from
the heavier to lighter
can decrease the
swingweight giving you
the ability to build a
longer driver, using the
heavier weights means
you can build a shorter
driver and still maintain
a normal swingweight.
By experimenting with
the weighting system of
the TM-4300 you will be
able to find the
combination that best
fits you or your
customers swing
characteristics.
.5
1.5
.5
.5
1.5
1.5
8
8
8
.5
8
1.5
4
8
8
8
3
1.5
.5
1.5
High
Trajectory
.5
3
.5
4
Normal Trajectory
Table Of Contents
Page
Items
2-4
5
6
7-11
12-15
16-17
18-19
20
21
Raven T our Sp ec Ser ies
2
The average driver head
weighs 198 to 202 grams.
The TM-4300 weighs 185
grams without any weights
added. 1 3/4 grams
equals 1 swingweight.
Forged Wedges
Forged Irons
Raven R ed Heads
Kenneth Smith Clubs
Raven H awk Ser ies
Excels ior Ser ies
Junior Clubs
Extrem e Dis tance
Fade Bias
Page
22-23
24
25
26-28
29-32
33-40
41-42
43
44
45
46
Items
Cast Irons
Cast W edges
Personalized Club Heads / Engraving
Putters
Grips
Shafts
Accessories
Trophies / Plaques
Tip Trimming Instructions
Fitting Guides
Tools
Visit www.ravengolfclubs.com or call toll free at 1-800-236-4566
2005
The New
Raven Tour Spec Series
Raven now offers a full line of clubs built to tour specs! It’s very hard to find clubs that use the
same materials and creation processes as those of the tour players. Made of premium SP700 titanium, the new TM-4300 has 5 interchangeable weight ports for the ultimate in
customization. No where else will you find this much time and energy put into a club head!
TM-4300 Tour Spec
WTM4300
LOFT (RH)
Loft (LH)
LIE
WGT (gms)
CC
Face HGT (mm)
Face Ang (d eg)
1
1
1
1
9.0
xx
10.5
12.0
xx
10
xx
xx
59
59
59
59
185
185
185
185
410
410
410
410
58
58
58
58
0
0
0
0
j
Driver has five weight ports and 12
interchangeable weights;
2 each - .5 g, 1.5 g (Aluminum)
2 each - 3.0 g (Brass)
2 each - 4.0 g, 6.0 g, 8.0 g (Tungsten)
2 Screw Driver Keys
j
The crown of the club is ultralite Beta-Ti for
the lowest COG possible and to maximize the
COR to the legal limit
j
3 wood has five weight ports; 4 and 5 woods
have four weight ports; 7 and 9 woods have
two weight ports
j
All head weights specified are measured
without any removable screws installed
j
SP-700 Titanium drivers - Stainless Steel
Fairway woods
j
Driver heads include screw pack. Fairway
woods do not!
TM-4300-F
WTM4300F
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
3
4
5
7
9
15
58.5
202
202
37
0
.335
18
59
212
180
36
0
.335
21
59.5
222
160
35
0
.335
23
60
225
160
34
0
.335
26
60
225
160
33
0
.335
3
2005
The New
Raven Tour Spec Series
Tour Spec TM-102i
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
IRM102
3
4
5
6
7
8
9
PW
21
58
0
242
24
59
0
249
27
60
0
256
31
61
0
263
35
61.5
0
270
39
62
0
277
43
62.5
0
285
47
63
0
292
j
Hand Forged from 8620 carbon steel
j
The face is CNC milled flat to meet
extremely tight tolerances
j
Every head comes in right on weight,
loft, and lie spec - every time!
j
Each groove on the face is CNC milled
in to allow precise feedback from each
shot
j
Absolutely incredible feeling blades!
Due to limited quantities these sets can ONLY be sold in 3-PW sets!
Half sets and single clubs are not available at this time!
Tour Spec RM-101
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
4
3
4
5
20
60
23.5
60.5
27
61
245
252
259
6
7
30
34
61.5
62
Minimal
266
278
IRM101
8
9
PW
39
63
42
64
46
65
280
287
294
j
Hand Forged from 8620 carbon steel
j
The back cavity is CNC milled into the
clubhead and face is CNC milled flat to
meet extremely tight tolerances
j
Each groove on the face is CNC milled
in to allow precise feedback from each
shot
j
Most forgiving and best feeling forged
cavity back out there!
2005
Raven Forged Wedges
The Raven Forged Wedges are a great addition to your set of clubs. Both models have
amazing feel for great shots around the green. The soft material can be bent for custom lie
angles to ensure square contact every time! With all the finishes available it ’s very easy to
match your existing set!
VCT Wedges
LOFT (deg) RH
LIE (deg)
Bounce (deg)
WGT (gms)
j
j
j
j
j
AW
SW
LW
52
64
5.0
295
56
65
8.5
298
60
66
5.0
300
8630 carbon steel
Near Net forged
Will not rust even if chipped in play
Non offset
Extremely soft material gives outstanding feel
Mix and Match!
3 Finishes Available in Right Handed!
Left Handed available in Mirror and Raw
Near Net Forged Wedges
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Bounce (deg)
WGT (gms)
j
j
j
j
AW
AW
SW
SW
SW
LW
50
52
54
56
58
60
60
xx
52
xx
56
xx
64
64
64
64
64
64
6.0
8.0
8.0
12.0
8.0
4.0
305
305
305
305
305
305
Mirror
Raw
Satin and High Polish are 8630 carbon steel; Raw wedges are
8620 carbon steel
Four way chamfer in the sole for the ultimate in shot making
Available in mirror, raw, and satin finishes
Extremely soft material gives outstanding feel
Satin
5
2005
Raven Forged Irons
The Raven Forged series is made of 8630 carbon steel which is the absolute softest material on
the market. It measures 85 to 90 on the HRB scale. All three forged models are mirror finished
for phenomenal durability. These forged clubs have an amazing feel and performance for the
golfer of any level.
TM-102i
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Offset (mm)
WGT (gms)
j
j
j
(ITM102C)
2
3
4
5
6
7
8
9
PW
18
21
24
27
31
35
39
43
47
18
21
24
27
31
35
39
43
47
58
58
59
60
61
61.5
62
62.5
63
0
0
0
0
0
0
0
0
0
235
242
249
256
263
270
277
285
292
Full blade design Non-offset
The ultimate in “feel”
Can be mix and matched with the VCT Irons
TM-303i
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Offset (mm)
WGT (gms)
3
4
5
6
7
8
9
PW
UW
SW
20
22
25
28
32
36
40
44
49
54
20
22
25
28
32
36
40
44
xx
54
58
59
60
61
62
63
64
64
64
64.5
4.25
4
3.75
3.5
3.25
3.0
2.75
2.5
2.25
2.2
242
249
256
263
270
277
284
286
286
290
Face thickness of .200 in.
Mirror finish
Oversized forged head
j
j
j
Turn the page
for matching wedges!
VCT
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
j
j
j
j
(ITM303C)
(IVCT)
2
3
4
5
6
7
8
9
PW
17
20
23
27
31
35
39
43
47
57
58
59
60
61
62
63
64
64
5.4
4.9
4.4
3.9
3.4
2.9
2.4
1.9
1.4
234
241
248
255
262
269
276
283
285
Will not rust even if chipped in play
Minimal progressive offset
Super soft feel for maximum performance
Can be mixed and matched with the TM-102 Blades
6
2005
The Raven Red Heads
These heads are made from the finest SP-700 Beta Titanium which amplifies the spring effect in
the club face. Using this material lets us create a club that pushes the legal COR Limit set by the
USGA. These clubs let you hit the ball as far as legally possible! The Red Heads are Raven’s
bedrock! They are super solid clubheads with styles that will live on for years to come!
TM-Pro
LOFT
LIE
W G T ( gm s )
CC
FACE HGT (mm)
F a c e A n g ( d eg )
Hosel Bore
j
j
j
j
j
j
j
TM-7002
LOFT (RH)
LOFT (LH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
j
j
j
j
( W T M P RO )
1
1
9.0
55
203
300
55
0
.335
10.5
55
203
300
55
0
.335
Awesome performance pushes the COR to the limit
Made of super high quality SP-700 Titanium
Deep red paint finish
True pear shape
Variable face technology for extreme distance
Smallest of the three Red Heads
.827 COR
(WTM7002)
1
1
1
1
1
8.5
xx
56
200
350
56
-1.0
.335
9.5
9.5
56
200
350
56
-1.0
.335
10.5
xx
56
200
350
56
-1.0
.335
xx
11.0
56
200
350
56
-1.0
.335
11.5
xx
56
200
350
56
-1.0
.335
New titanium closes in on the COR Limit
Made of super high quality SP-700 Titanium
Deep red paint finish
No foam in head for maximum feel
Variable face technology for extreme distance
12 degree bulge, 12 degree roll
Available in LEFT hand
The mid-size Red Head
.828 COR
7
2005
The Raven Red Heads
TM-4000
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
j
(wtm400)
1
1
1
1
7.5
54
202
400
54
-1.0
.335
9.0
54
202
400
54
-1.0
.335
10.5
54
202
400
54
-1.0
.335
12.0
54
202
400
54
-1.0
.335
HI-LOFT
13.5
54
202
400
54
-1.0
.335
15.0
54
202
400
54
-1.1
.335
Extremely high COR level, but still USGA legal
Near Net forging process for the ultimate in
playability and distance
“HI LOFT” series does not list loft on bottom of
club
Milled variable face - 2.1mm on the edges to 2.8mm
in the center
Bulge and roll is 10.0” x 10.0”
The largest of the three Red Heads
Matching Headcovers
below!
The new black or burgundy Raven headcovers match great with the Red Heads. They are
embroidered with the Raven logo. Whether you have the largest or the smallest of club
heads we have a head cover to fit. Check out the Accessory page for more headcovers
and bags!
8
2005
The Raven Red Heads
The Red Head Fairway Wood collection is a series of wood heads formulated from a custom
heat treated 15-5 Stainless Steel. Extensive testing was done to ensure a perfect sweet spot.
The TM-Pro is a low profile smaller head designed for a boring ball trajectory. The mid-sized TM7002 is designed for longer length shafts. Whichever model you choose you are guaranteed a
perfect match to your Red Head driver!
Raven Red Head Hybrid
LOFT (RH)
LIE
WGT (gms)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
TM-7002 Fairway
LOFT (RH)
LIE
WGT (gms)
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
j
j
2
3
4
5
17
58.5
228
0
.335
20
59
233
0
.335
23
59.5
238
0
.335
26
60
243
0
.335
Perfect Hybrid option to match any
of the redhead fairway woods or
drivers
15-5 stainless steel
super low center of gravity for high
straight shots
Satin face - Polished sole
Comes with a free headcover!
(WTM7SS)
3
5
7
9
15
18
21
24
58
58
58
58
210
220
225
230
38
37
36
35
-1
-1
-1
-1
0.335
0.335
0.335
0.335
Mid-sized head
15-5 heat treated stainless steel
Large sweet spot
230 cc 3 wood
Near Net Cast
Satin face
Deep red color
9
2005
The Raven Offset Red Heads
The TM-Pro-Offset models are great for those golfers who have the common slice. The driver head
is made of high quality beta - titanium, while the fairway woods are made of 15-5 stainless steel.
The TM-Pro Offset series will help you find the fairway!
TM-Pro-Offset
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
(WTMPO)
1
1
1
9.5
56
200
360
54
-1.0
.335
10.5
56
200
360
54
-1.0
.335
12.0
56
200
360
54
-1.0
.335
Made of 10-2-3 BetA Titanium
Offset to cure slice
Deep red color
TM-Pro-Offset Fairway
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
10
(WTMPOF)
3
5
7
9
15
19
22
24
58
58
58
58
210
220
224
230
180
160
140
135
40
37
35
34
0
0
0
0
0.335
0.335
0.335
0.335
Made of 15-5 Stainless Steel heat treated to HRC 24
Offset to cure slice
Deep red color
Polished sole and face
2005
The Raven Red Heads
The TM-Pro-2 is the improved upon version of the TM-Pro. Both offer outstanding playability,
but the TM-Pro-2 has a larger sweet spot. This makes solid contact with the ball much easier!
If you seem to have trouble with your fairway woods check these out, you’ll be surprised!
TM-Pro-2
LOFT (RH)
LOFT (LH)
LIE
WGT (gms)
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
(WTMP2)
1
3
5
7
9
10.5
15
18
21
24
xx
15
18
21
xx
56
57
57
58
58
202
212
222
228
233
42
38
36
34
34
0
0
0
0
0
.335
.335
.335
.335
.335
Evolved version of the TM-Pro
Made of 15-5 Stainless Steel heat treated to HRC 24
Polished face and sole
Deep red color
Personalize It!
Anything with a
logo can be Laser engraved with just about
anything you’d like! From initials and nicknames to company logos we can add it to your club for a small additional charge!
The Baby Club
The baby club is personalized
for every new born! All the
information, including; name,
birthday, weight, and length
are engraved on the crown of
the club. The club is then
made to the length of the
baby! It makes an awesome
gift for your special new born!
11
2005
The Imperial Collection
Originating in the early 1900’s, Kenneth Smith is the oldest existing custom club company in the USA!
We are continuing their quality clubs with the new Imperial Collection. The Titanium drivers come in
two different sizes, and both have matching fairway woods. The traditional shaped heads are great
for those who enjoy throwback clubs!
340 CC
(WKST3)
Kenneth Smith Titanium
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
1
1
1
9.0
10.5
12.0
56
56
56
200
200
200
340
340
340
55
55
55
0
0
-1.0
.335
.335
.335
Did you ever wonder what golf clubs
won the inaugural Masters Tournament?
It was Kenneth Smith in 1928!
Kenneth Smith also won the French Open
that year.
420 CC
(WKST4)
Kenneth Smith Titanium
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
12
1
1
1
10
12
14
56
56
56
200
200
200
420
420
420
55
55
55
0
0
-1.0
.335
.335
.335
340, 420 CC heads available
Thin face of SP-700 Titanium for extra
long distance.
Traditional shaped head
The newest designs from Kenneth Smith
Rich black color
2005
The Imperial Collection fairway woods are a perfect match to the titanium drivers!
A traditional shaped wood with a low center of gravity. They are designed to come in
many lofts to allow all golfers to fill that exact carry distance they are looking for. If you
can not find it in the Fairway Metal look at the New Hybrid offering.
(WKSFW)
Kenneth Smith Fairway
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
3+
3
5
7
9
13
57
210
205
39
0
.335
15
57
212
185
34
0
.335
20
58
220
170
34
0
.335
233
59
224
160
32
0
.335
26
59
228
158
31
0
.335
Mix and match all the Kenneth Smith clubs!
Rich black color
Double heat treated stainless steel
Crown alignment on head matches that of
the driver
Buy any Kenneth Smith wood head and
receive a free Kenneth Smith Headcover!
(WKSHB)
Kenneth Smith Hybrid
LOFT (RH)
LIE
WGT (gms)
CC
Face Ang (d eg)
Hosel Bore
j
j
j
j
18
57
220
150
-1
.335
21
58
225
150
-1
.335
24
59
230
150
-1
.335
Mix and match with the standard size fairway
woods!
Rich black color
Alignment of crown matches the fairway
woods and drivers
Double heat treated stainless steel
13
2005
New this year for Kenneth Smith are the 460cc Classic Titanium driver heads and the Classic
Wedges. The new driver is the largest we offer! The Classic wedges are a great match to any
of the new Kenneth Smith irons, and are very easily customizable to meet everyone’s needs.
(WKSC)
Kenneth Smith Classic
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
1
1
1
9.0
10.5
12.0
56
56
56
199
199
199
460
460
460
60
60
60
-1
-1
-1
.335
.335
.335
j
Super oversize 460cc head!
j
15-3-3-3 Beta Ti head makes a huge
sweet spot
j
Springboard face creates awesome
distance
j
Head cover and custom ferrule
included
(IKSW)
Kenneth Smith Wedges
LOFT (deg) RH
LIE (deg)
Bounce (deg)
WGT (gms)
14
AW
SW
LW
52
64
6.0
305
56
64
12.0
305
60
64
6.0
305
j
NearNet Forged 304 stainless steel
heads
j
Can be custom ground and repolished
to change bounce
j
Super soft stainless feel for the
“touch player”
2005
The Imperial Collection Irons are some of Kenneth Smith’s finest. Only the highest quality
materials are used in the construction of these club heads. Each head is put through a
rigorous final inspection to ensure the perfect club head ever y time!
(IKSB)
Kenneth Smith Blade
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
j
j
j
2
3
4
5
6
7
8
9
PW
AW
SW
18
57
0
240
21
58
0
246
24
59
0
252
27
60
0
258
31
61
0
264
35
61.5
0
271
39
62
0
278
43
62.5
0
285
47
63
0
294
52
63
0
296
55
63
0
300
100% Hand Forged from 1025 carbon steel
Much taller toe than a standard blade makes for a larger sweet spot
Zero offset gives these clubs true forged
feel and playability
Kenneth Smith Cavity Back
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
j
j
j
3
4
5
6
20
61
23
61.5
26
62
29.5
62.5
243
250
257
264
7
8
9
33
37
41
63
63.5
64
Progressive
271
279
285
(IKSLCG)
PW
AW
SW
LW
45
64.5
50
64.5
55
64.5
60
64.5
292
295
300
303
Perimeter weighted cast stainless steel
head made from 431 stainless steel
Low center of gravity makes for long and
straight shots
Traditional size and shape
Kenneth Smith Milled Cavity (IKSMC)
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
j
j
j
j
3
4
5
21
61
24
61.5
27
62
244
251
258
6
7
8
31
34.5
38
62.5
63
63.5
Progressive
265
272
279
9
PW
SW
42
64
46
64.5
56
64.5
286
293
300
Perimeter weighted NearNet Forged heads
Low center of gravity makes for long and
straight shots
Undercut back cavity helps with forgiveness
304 stainless steel
15
2005
Raven Hawk Series
The Raven Hawk Series is designed for game improvement. With it’s easy to hit Titanium drivers and
different sized fairway woods, it’s pretty easy to find something to fit you. It’s also great for those on
a tight budget! All the heads in this series can easily be mixed and matched!
Raven Hawk MVF
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (deg)
Hosel Bore
j
j
j
j
(WRHMVF)
1
1
1
1
1
1
7.0
55
198
340
56
-1.0
.335
8.0
55
202
340
56
0
.335
9.0
55
202
340
56
0
.335
10.0
55
202
340
56
-1.0
.335
11.0
55
204
340
56
-1.0
.335
12.0
55
205
340
56
-.10
.335
Variable face for explosive power
Super tall face, extra large sweet spot
Deep green color
USGA conforming
Raven Hawk 15-5
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
16
(WRHSS)
1
1
2
3
4
5
7
9
55
206
185
40
0
.335
10
55
206
185
40
0
.335
12
55
206
185
38
0
.335
15
56.5
212
175
38
0
.335
18
57
222
165
34
0
.335
20
58
226
155
32
0
.335
23
59
229
145
32
0
.335
A special 15-5 metallurgy blends the finest properties of
both titanium and stainless steel
Deep green color
Foam filled
2005
Raven Hawk Series
The Raven Hawk low profile fairway woods and driving irons are great utility clubs. The low profile
woods make getting the ball in the air off any surface quite easy. The driving irons are great for
all around play, such as: out of the rough, off the tee, in the sand, or around the greens. Both
are excellent additions to any bag!
Raven Hawk Maraging
LOFT (RH)
LOFT (LH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (deg)
Hosel Bore
(WRH)
1
1
3+
3
5
7
9
9
xx
55
204
190
32
0
.335
11
11
55
204
190
32
0
.335
13
xx
55.5
208
180
32
0
.335
16
xx
56
215
180
32
0
.335
19
19
56.5
220
170
32
0
.335
23
23
57
222
160
32
0
.335
27
xx
57.5
225
150
32
0
.335
Maraging Deep Faced
(WRHDF)
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
1
1
1
8.5
56
204
210
44
0
.335
9.5
56
204
210
44
0
.335
10.5
56
204
210
44
0
.335
j Three-metal design
j 455 maraging face
j Copper weights are
inserted into the sole
for a lower center of
gravity
j Low profile design
j Deep green color
Matching iron set!
Raven Hawk MVF
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
j
j
j
j
3
4
5
6
21
60
23.5
60.5
26
61.5
29
62
242
249
256
263
7
8
(IRHMVF)
9
33
38
42
62.5 63.5
64
Progressive
270
277
284
PW
SW
AW
LW
47
65
50
65
56
65
60
65
291
296
300
302
New styling in an old classic - The MVF is back!
Low center of gravity for high and straight shots
New styling in the medallion makes these clubs match
perfectly to the MVF line of drivers and fairway woods
Can be bent for custom loft and lie angles
17
2005
The Excelsior Series
The Excelsior line of golf clubs is great for all golfers. Just like the Raven Hawk series, the Excelsior
series offers titanium and stainless steel options at a discount price. You are sure to find a
combination right for you!
EX-1200 Titanium
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
j
(WEX12T)
1
1
9.0
56
202
380
56
-1.0
.335
11.0
56
202
380
56
-1.0
.335
Deep faced, hand forged titanium
USGA legal
90-6-4 Alpha TI head
Deep blue color
.829 COR
Trampoline Face
EX-1200
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
18
(EX1200)
1
1
3+
3
4
5
7
9
9
56
204
250
45
-1
.335
10.5
56
204
250
45
-1
.335
13
57
210
185
38
-1
.335
15
57
214
185
38
-1
.335
17
57
220
185
38
-1
.335
20
58
222
185
37
-1
.335
23
58.5
227
165
36
-1
.335
25
59
230
165
35
-1
.335
A mid-size 15-5 stainless steel head
Many different lofts make for good customization
Low COG for easy shots off the fairway or out of
the rough
Deep blue color
2005
The Excelsior Series
EX-2200
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
j
EX-3200-F
LOFT (RH)
LIE
WGT (gms)
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
j
j
j
j
j
(EX2200)
1
1
3
5
7
9
57
202
275
46
0
.335
10.5
57
202
275
46
0
.335
15
57
214
160
31
0
.335
18
57
222
145
30
0
.335
21
57
226
130
30
0
.335
15-5 stainless steel for lightweight
designs
Low profile fairway woods
Low center of gravity
Easy to hit off the fairway and out of the
rough
Oversized drivers with large sweet
spots
Deep blue paint finish
(EX3200F)
3
5
7
9
14
59
214
33
0
.335
17
59
224
32
0
.335
20
59
228
31
0
.335
23
59
232
30
0
.335
Hybrid design
.335 hosel for all the wood shaft
options
15-5 stainless steel and foam filled
Great for off the tee, in the rough, on
the fairway, or even around the greens
Deep blue paint finish
19
2005
Don’t forget about the Junior Golfers!
Raven offers a series of specially weighted club heads and shafts for the junior golfer. The iron
heads are made of zinc to keep the weight down, while the Ti-alloy wood head gives outstanding
durability. This is a great way to get your junior golfer started on the right foot!
Junior Power Play
LOFT (RH)
LOFT (LH)
Hosel Bore
j
j
j
j
Wood
5I
7I
9I
(JRR)
Putter
16
16
.335
34
34
.370
42
42
.370
50
50
.370
.370
The Power Play Jr. Set is ideal for
young kids starting out
Lighter weight and higher lofts make it
easy to get the ball airborne
Zinc irons have an attractive mirror
finish
Ti-Alloy wood is a charcoal color
Junior Bags
j
Junior Sized Grips
j
j
Standard Wrap
Junior carry bags and
stand bags available!
Stand bags come with an
easy to use double
shoulder strap
Call for color
availability
Black Velvet Touch
(APJR)
Jun ior St eel
Ir on s
Woods
j
j
j
20
Stk. Code
APJRI
APJRW
Fl ex
Jr.
Jr.
Tip Dia .
.370
.335
B u t t D ia .
.500
.500
L en g t h ( in )
35
40
Fl ex Pt.
Low
Low
W g t . (g ms )
102
107
Small butt diameter for young kids
Perfect for very early beginners!
Flexible enough to make very short clubs
2005
Extreme Distance Series
(WEX450)
450i Standard
What makes the 450i Extreme Distance series so
unique is the material makeup. The series is
manufactured from the industry ’s finest “Hybrid”
cast 450i material. Due to the great heat
treating properties of the 450i we are able to
produce a very hard and ultra thin face. This
makes the feel and performance best in its
class. We offer three size drivers to
accommodate everyone’s needs!
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
1
1
1
8.5
56
204
220
39
0
.335
9.5
56
204
220
39
0
.335
10.5
56
204
220
39
0
.335
(WEX450M)
450i Midsize
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
1
1
1
1
8.5
56
202
250
45
0
.335
9.5
56
202
250
45
0
.335
10.5
56
202
250
45
0
.335
12.0
56
204
250
45
0
.335
(WEX450J)
450i Super Size
1
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
10.0
56
204
280
42
-1
.335
(WEX450)
450i Fairway
j
j
j
j
j
j
Made of Super 450i metallurgy to maximize
the COR allowed by the USGA
Extremely thin face increases both
distance and feel
Smaller head to satisfy the traditionalist
RC 42 face hardness
Only available in right hand
Metallic black paint finish
LOFT (RH)
LIE
WGT (gms)
CC
FACE HGT (mm)
Face Ang (d eg)
Hosel Bore
3
4
5
7
15
57
212
140
36
0
.335
19
57
218
130
34
0
.335
21
58
222
120
34
0
.335
24
58
225
115
32
0
.335
21
2005
Raven Cast Series
Smaller Version
TM-Pro
LOFT (deg)
LIE (deg)
WGT (gms)
OFFSET (mm)
BOUNCE (deg)
CAVITY THICKNESS
(mm)
(ITMP)
3
4
5
6
7
8
9
PW
UW
SW
20
23
27
31
35
39
43
58
59
60
61
62
63
64
47
51
55
64
64.5
245
252
259
266
273
280
65
288
290
300
305
2.3
2.0
1.7
1.4
1.1
0
0
0
0
1
.8
.5
.5
0
0
1
2
3
4
5
4.5
5.0
5.5
6.0
6.5
7.0
7.2
7.2
7.5
7.5
Larger Version
TM-Mid
LOFT (deg)
LIE (deg)
WGT (gms)
OFFSET (mm)
BOUNCE (deg)
CAVITY THICKNESS
(mm)
3
4
5
6
7
8
9
PW
20
23
27
31
35
39
43
58
59
60
61
62
63
64
245
252
259
266
273
280
3.2
2.9
2.6
2.3
2.0
0
0
0
0
4.3
4.8
5.3
5.8
Team Raven
j
j
j
UW
SW
47
51
55
64
64.5
65
288
290
300
305
1.7
1.4
1.4
0
0
1
1
2
3
4
5
6.3
6.6
7.0
7.0
7.5
7.5
431 (AISI) stainless steel - Heat treated to HRC 22
U Grooves - .5mm deep x .8 mm wide
Small pregressive offset for game improvement
Feel of forged clubs but forgiveness of a casting!
Soft material makes it easy to bend for custom lie angles
TM-Pro 5 iron blade = 84mm ; TM-Mid 5 iron blade = 90 mm
j
j
j
j
j
j
LOFT (deg)
LIE (deg)
Offset (mm)
WGT (gms)
(ITMM)
(ITR)
2
3
4
5
6
7
8
9
PW
SW
16
20
23
27
31
35
39
43
48
55
58
59
60
61
62
62.5
63
63.5
64
65
4.0
3.5
3.0
2.5
2.0
1.5
1.0
.5
0
0
235
242
249
256
263
270
277
284
292
298
A high performance design with very little offset throughout
the entire set
Strategically weighted to produce higher ball flight in the
longer irons and lower, more controllable ball flight in the
shorter irons
431 stainless steel can be bend for custom lie angles
22
2005
Raven Cast Series
Raven Undercut
LOFT (deg) RH
LIE (deg)
Offset (mm)
WGT (gms)
1
2
3
4
5
15
60
17
60.5
19
61
22
61.5
25
62
235
235
244
251
258
6
7
(IRVUC)
8
28
32
36
62.5
63
63.5
Progressive
265
272
279
j
Brand new head style for 2005
j
Undercut sole makes an extremely forgiving head
j
Perimeter weighting gives a great feel throughout the set
j
Can be bent for custom loft and lie angles
9
PW
AW
SW
LW
40
64
44
64.5
49
64.5
54
64.5
58
65
286
293
296
300
303
(IEX160)
Excelsior 160i
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Offset (mm)
WGT (gms)
2
3
4
5
6
7
8
9
PW
AW
SW
LW
18
21
24
27
30
34
38
42
46
50
54
60
xx
21
24
27
30
34
38
42
46
xx
54
xx
58.5
59
60
60.5
61
62.5
63.5
64.5
65
65
65
65
6
6
5.5
5
4.5
4
3.5
3
2.5
2
2
2
236
244
251
258
265
272
279
286
293
296
300
302
j
The ultimate in game improvement
j
Super low center of gravity for higher, longer shots
j
fat bottom sole design makes it extremely easy to hit
j
431 stainless steel can be bent for custom lie angles
j
For $2.00 extra per club the 160i medallion on the back
can be custom made with your logo, name, or just about
anything you’d like!
Custom medallions can now be made for many clubs!
Please inquire to see what we can do for you!
23
2005
Raven Cast Wedges
The cast wedge options are great for every golfer on a tight budget. With high polish, milled
face, and polymer insert selections there is a wedge to fit every golf shot! The milled and high
polish wedges are great for engraving purposes. Add your company logo, initials, or anything
else you can imagine!
Milled Face
LOFT (deg) RH
LIE (deg)
Bounce (deg)
WGT (gms)
j
j
j
j
High Polish
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Bounce (deg)
WGT (gms)
j
j
j
AW
SW
LW
50
63
5.0
300
55
64
8.5
305
60
64
5.0
305
Smaller stainless steel head
CNC milled to .001in. to create 1000’s of micro-grooves
for added spin and feel
GREAT for Laser engraving!
Right Hand Only
(IRSW)
AW
SW
LW
52
52
65
7.0
300
56
56
65
12.0
305
60
60
65
3.0
305
Classic wedge design
431 stainless steel can be bent for custom lie angles
GREAT for Laser engraving!
Polymer Insert
LOFT (deg) RH
LIE (deg)
Bounce (deg)
WGT (gms)
j
j
j
24
(IRHM)
(IPOL)
PW
AW
SW
LW
LW
48
65
5.0
305
52
65
6.0
305
56
65
9.0
305
60
65
6.0
305
64
65
3.0
305
Milled polymer face gives a much softer feel and more spin
Oversized wedge head
USGA legal insert
2005
Personalized Club Heads
We also have the capability to customize your club heads! Almost any company logo
can be laser engraved into one of our wood, wedge, or putter heads. From a small
wedge set to a large company order we can get it done for you!
Give us a call to find out more details on which club heads are available for
engraving or to inquire about special pricing.
25
2005
The TM Series
The Raven TM Series offer an large array of options! With your choice of polymer inserts, milled
faces, mallet style heads or traditional shapes, and awesome engraving capabilities you’re
sure to find something you like.
TM-25
LOFT (deg) RH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
3.0
72
365
STRAIGHT
YES
USGA conforming polymer insert
431 stainless steel
Can be engraved in polymer insert
TM-35
LOFT (deg) RH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
3.0
72
364
STRAIGHT
YES
USGA conforming polymer insert
431 stainless steel
Can be engraved in polymer insert
TM-45
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
3.0
3.0
90
380
MALLET
YES
Heavy mallet style head for great feel
431 stainless steel
Can be engraved on face
TM-65
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
j
26
4.0
4.0
72
330
STRAIGHT
YES
Long offset hosel
431 stainless steel
Awesome for engraving!
Can Be engraved on face or sole
2005
The EX Series
The entire EX series of putters contain USGA legal polymer inserts. They are a minimum
hardness of 80 Shore D Scale. These inserts give amazingly soft feel without sacrificing weight
in the head. There is also a center shafted option for those who need some help lining up
putts! The soft polymer insert also make these putters GREAT for engraving!
EX-2
LOFT (deg) RH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
4.0
72
315
STRAIGHT
YES
All milled polymer insert
Engrave in polymer insert
EX-3
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
3.0
3.0
90
351
MALLET
YES
All milled polymer insert
EX-4
LOFT (deg) RH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
j
3.0
73
351
STRAIGHT
YES
Two way milled polymer face
Center shafted
Great for players with strong eye
dominancy
27
2005
Brass Series
This series of putters are made out of 100% brass! Both milled and cast brass models are
available. Brass putters are known for there excellent feel and their great weighting!
Heel/Toe
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
3.0
3.0
72
305
STRIAGHT
YES
Cast Brass
Great for juniors or beginners
Can be engraved on sole or the face
TM-30
LOFT (deg) RH
LIE (deg)
WGT (gms)
Shaft Type
Engrave
j
j
j
j
j
3.0
72
320
DOUBLE BEND
YES
Made in the USA!
Heel/Toe weighted design
100% milled brass
Made for face balancing
Can be engraved on the face or the sole
Straight taper or double bend putter shafts
TM-80
LOFT (deg) RH
3.0
LOFT (deg) LH
3.0
LIE (deg)
72
WGT (gms)
325
Shaft Type
MALLET
Made in the
Engrave
YES
j
Heel/Toe weighted design
j
100% milled brass
j
Can be engraved on the face or the sole
j
Mallet or single bend putter shafts
j
Also available in steel!
28
USA!
2005
The Tour Select Series are rubber based grips with a buffed finish for a natural feel. They are available in
black and white color schemes to satisfy many tastes.
Tour Select (Black) (GKTS)
Available in:
Standard size
Tour Select (White) (GKTSW)
Available in:
Standard size
Jumbo
Tour Select Full-Cord (White)
Available in:
Standard size
(GKTSWC)
The Perforated Wrap is Kelmac’s best seller! The seamless simulated wraps offer outstanding tackiness for
control.
Perforated Wrap (GKPW)
Available in:
Standard size
Mid-size
Jumbo
Ladies
Specialty grips from Kelmac include the patented Line Grip, which reduces twisting of the grip in your hands
and the Ruff Wrap features extreme texture for added traction.
White Line
Available in:
Ruff Wrap
Available in:
(GKWL)
Standard size
(GKRW)
Standard size
Proper hand position is the foundation to a good swing. The Kelmac training grip helps develop muscle
memory. Every golfer could use one of these training grips!
Training Grip (RH) (GKTR)
Available in:
Standard size
Training Grip (LH) (GKTRL)
Available in:
Standard size
29
2005
The Winn Grip line of golf grips have an amazingly soft feel. They are made of a composite of
materials not seen in any other brand of grips. With a lighter weight they help to offer better club
head feel while the soft foam core dampens vibrations.
Excel RF Mocha
(GWLDM)
Available in:
Undersize
(Ladies)
(Winn# - 3715W-MO)
39 Grams
Classic RF Black
(GWBM) Available in:
Standard
Mid-size
42 Grams
Oversize
(Winn# - 5715C)
(Winn# - 6XWC) Firm
(Winn# - 7751C)
43 Grams
47 Grams
Classic RF Tan
G7
Black XF
Available in:
Standard
Midsize
50 Grams
(Winn# - 5G7X)
G8
Navy RF
Available in:
Standard
50 Grams
(Winn# - 5G8-NY)
(GWT)
Available in:
Standard
42 Grams
(Winn# - 5715C-TN)
NEW From WINN
G8
Black XF
Available in:
Standard
Excel XF Two-Tone (M/B) (GWFTT)
50 Grams
(Winn# - 5G8X)
Available in:
Standard
Excel Copper
V17-RT
50 Grams
(Pt. No.: T5XW2C-MB)
XF
(GWAWC)
(Winn# - 5VRAX-NYB)
Available in:
Standard
42 Grams
(Winn# - 5XWC-CP)
Contour Mahogany
Navy/Black XF
V17-RT Dark Gray XF
(Winn# - 5VRAX-DYG)
(GWFM)
(GWRTN)
Available in:
Standard
50 Grams
(GWRTG)
Available in:
Standard
50 Grams
Available in:
Ribbed
(Winn# - 57X5CR-MG)
V17-AVS Navy RF
42 Grams
V17-AVS Dark Gray XF
(GWAVSN)
Available in:
Standard
(Winn# - 5VSA-NY)
30
50 Grams
(Winn# - 5VRAX-DYG)
(GWAVSG)
Available in:
Standard
50 Grams
Winn Putter Grips are
on the next page!
2005
Avon has produced the Chamois Grip for years. Try one out and see
why its been around for this long!
Chamois Ladies II (Gray)
Available in:
(GACHLG)
Ladies
Original Chamois Ladies (Blue)
Available in:
(GACHLB)
Ladies
Original Chamois Mens (Brown)
Available in:
(GACHMB)
Standard
Jumbo
Logo Grips
Winn Putter grips
USA Pistol
Standard Wrap
(GWPUSA)
Putter (RAPRVPW)
(Winn# - M8W-USA)
Round
(GARVPW)
Tour Select
60 Grams
Black/Red Pistol
(Winn# - T58W-BR)
(GWPRB)
60 Grams
Putter
(GAPRVTS)
Medallist V17 AVS Pistol
Round
(GARVTS)
(Winn# - M8VSC-DGY)
Two-Tone (M/B) Pistol
(GWPAVS)
72 Grams
(GWPMG)
Putter
58 Grams
(Winn# - HTG-Y2K)
Black Paddle (Oversize)
(GWPOS)
Round
(Winn# - 7815W)
90 Grams
31
2005
Raven’s Choice
Raven’s own grips offer superior quality at an unbeatable price! Quality, selection, and designer
fashion are what this line is all about. Mix and match these great grips and get a quantity discount!
Standard Wrap
(GRCSW)
Black Velvet Touch
Available in:
Available in:
Junior
Ladies
Standard
Mid-Size
Putter
Zig-Zag Supreme
(GRCVT)
Junior
Ladies
Standard
Mid-Size
Cord
Putter
(GRCZZ)
White Velvet Touch
Available in:
(GRCWVT)
Available in:
Standard
Ladies
Standard
Putter
Crown Supreme
(GRCCR)
Available in:
Standard
Specialty Putter Grips
Channel Putter
Grand Tour Oversize
(GRCPCH)
(GRCOSGT)
Available in:
Oversize
Putter
Long Belly
Softy Tour Wrap
(GRCSF)
(GRCBELLYL)
Available in:
Ladies
Standard
Full Cord
Standard Wrap Cord
(GRCFCW)
Two-Piece Belly
(GRCBELLY)
Available in:
Standard
32
2005
Raven’s Choice Steel
The new Raven steel shafts have the ability to revolutionize your game! With three weights to choose
from and a new step-less shaft, your playing partners better watch their backs. These shafts have very
high tolerances to ensure a perfect set of clubs every time.
Platinum
R
Platinum
S
Flex
Length
(in)
Weight
(gms)
Tip
Dia.
Tip
Parallel
Butt Dia.
# of
Steps
Flex Pt.
R/S
41
135
0.370
12"
0.600
12
High
R/S
46
135
0.335
12"
0.600
12
High
Iron
Woods
(RCSTPI) j
(RCSTPW) j
Custom Made
High bend profile for maximum control
Tightly matched weight for consistency throughout the set
Designed for players who want a boring trajectory
j
Platinum Lite
Flex
Length
(in)
Weight
(gms)
Tip
Dia.
Iron
R
Platinum Lite
S
Custom Made
Ultra-Lite
120
0.370
12.8
0.600
12
40
115
0.370
12.8
0.580
12
Mid
Wood
R/S
46
115
0.335
12.0
0.600
12
Mid/High
A revolutionary shaft featuring dynamic feel with lighter weight
Great for players who want longer length shafts with traditional
trajectory
Platinum SL
Platinum SL
Flex
Length
(in)
Weight
(gms)
Tip
Dia.
Tip
Parallel
Butt Dia.
# of
Steps
Flex Pt.
R/S
41
100
0.370
9
0.600
20
Mid
Iron
(RCSTPU)
Custom Made
R
S
Custom Made
It is the only ultra-lite combination flex shaft on the market today
Recommended for anyone wanting to take weight out of their irons
j
j
Flex
Length
(in)
Weight
(gms)
Tip
Dia.
Tip
Parallel
Butt Dia.
# of
Steps
Flex Pt.
A/S
41
120
0.370
8
0.600
0
Mid
A/S
46
115
0.335
8
0.600
0
Mid
n/a
37
120
0.370
12
0.600
0
n/a
Iron
Wood
Putter
(RCSTPSLI) j
(RCSTPSLW)
(RCSTPSLP) j
Platinum EL
Flex
R
Platinum EL
Custom Made
S
Mid/High
41
A/L
(RCSTPLW) j
S
Flex Pt.
R/S
Platinum Ultra-Lite
Platinum
# of
Steps
(RCSTPLI)
j
R
Tip
Butt Dia.
Parallel
Iron
(RCSTPELI) j
j
R/S
this shaft has great tip sensitivity for the player who wants to
feel where the club head is
Step-less design
Length
(in)
Weight
(gms)
Tip
Dia.
Tip
Parallel
Butt Dia.
# of
Steps
Flex Pt.
41
130
0.370
12"
0.600
10
Mid
Entry level shaft offering high quality at affordable prices
Designed for clubs played at standard length or shorter
The new swing trainer from Raven is designed to help players strengthen key muscles to improve
fundamentals and technique. This is a great warm up club and swing trainer in one! This club should
not be used to hit golf balls! The trainer comes assembled at 35.5”and weighs 2.8 pounds.
33
2005
Dynamic
Woods
Irons
j
j
Stk. Code
TTDYNW
Flex
R/S
Tip Dia.
.335
Butt Dia.
.600
Length (in)
47
Flex Pt.
High
Wgt. (gms)
123
TTDYNI
R/S
.370
.600
41
High
129
One of the most popular shafts in the history of golf equipment
The Dynamic pattern has a firm tip, high bend point and is
manufactured to a standard weight
Dynamic Gold
Woods
Irons
j
j
j
Stk. Code
TTDGWR
TTDGWS
TTDGXW
Flex
R300
S300
X100
Tip Dia.
.335
.335
.335
Butt Dia.
.600
.600
.600
Length (in)
46
46
46
Flex Pt.
High
High
High
Wgt. (gms)
122
124
121
TTDGIR
TTDGIS
TTDGXI
R300
S300
X100
.370
.370
.370
.600
.600
.600
41
41
41
High
High
High
124
127
127
True Temper pioneered the art of frequency matching and weightsorting steel shafts with the Dynamic Gold line of shafts
For the golfer whose swing fundamentals are best matched by a
firm tip, standard weight, and higher bend profile
The Dynamic Gold line is the most popular steel shaft on the Pro
Tours
Dynamic Gold w/ Sensicore
Woods
Irons
j
j
Stk. Code
TTDGSWR
TTDGSWS
Flex
R300
S300
Tip Dia.
.335
.335
Butt Dia.
.600
.600
Length (in)
46
46
Flex Pt.
High
High
Wgt. (gms)
122
123
TTDGSIR
TTDGSIS
R300
S300
.370
.370
.600
.600
41
41
High
High
124
127
Most popular steel shaft in golf
Can easily be made to longer lengths to provide the club maker
with more options
Dynamic Gold Lite
Stk. Code
TTDGLIR
TTDGLIS
Irons
j
j
Flex
R300
S300
Tip Dia.
.370
.370
Butt Dia.
.610
.610
Length (in)
41
41
Flex Pt.
High
High
Wgt. (gms)
106
109
This revolutionary shaft features the playing attributes of the
Dynamic Gold but in an ultra lightweight design
Perfect choice for golfers seeking a low trajectory
Dynamic Gold SL Iron Shafts
Stk. Code
TTDGSLIR
TTDGSLIS
TTDGSLIX
Irons
j
34
Flex
R300
S300
X100
Tip Dia.
.370
.370
.370
Butt Dia.
.600
.600
.600
Length (in)
41
41
41
Flex Pt.
High
High
High
Wgt. (gms)
106
106
109
This is the newest technology from True Temper. Made of a
superlite alloy called S3 we can now push the limits of what
was thought possible in a golf shaft!
2005
Dynalite
Woods
Stk. Code
TTDLW
TTDLWAL
Flex
R/S
A/L
Tip Dia.
.335
.335
Butt Dia.
.600
.580
Length (in)
47
46
Flex Pt.
Low
Low
Wgt. (gms)
117
110
TTDLI
TTDLIAL
R/S
A/L
.370
.370
.600
.600
41
40
Low
Low
120
110
Irons
Matches the same design characteristics of the original “Apex”
shaft made for the Ben Hogan company in the 1970’s and 1980’s
Designed for players in need of higher club head speed and a
slightly higher shot trajectory
j
j
Dynalite Gold
Woods
Stk. Code
TTDLGWR
TTDLGWS
Flex
R300
S300
Tip Dia.
.335
.335
Butt Dia.
.600
.600
Length (in)
45
45
Flex Pt.
Low
Low
Wgt. (gms)
112
112
TTDLGIR
R300
.370
.600
40
Low
118
TTDLGIS
S300
.370
.600
40
Low
118
Irons
A frequency matched, light weight low flex point shaft
Designed for the golfer who would love to have frequency
matched shafts but still maintain a higher ball flight
j
j
TT Lite XL
Woods
Stk. Code
TTLTSW
TTLDLWAL
Flex
R/S
A/L
Tip Dia.
.335
.335
Butt Dia.
.600
.580
Length (in)
48
46
Flex Pt.
Mid
Mid
Wgt. (gms)
126
114
TTLSI
R/S
.370
.600
43
Mid
132
TTLTIAL
A/L
.370
.580
40
Mid
114
Irons
Can be made to much longer lengths than most shafts
The mid flex point makes it a great shaft for all players
j
j
TX-90
Stk. Code
TTTX90IA
TTTX90IR
TTTX90IS
Irons
j
j
Flex
A
R
S
Tip Dia.
.370
.370
.370
Butt Dia.
.600
.600
.600
Length (in)
41
41
41
Flex Pt.
Low
Low
Low
Wgt. (gms)
102
104
107
Super light alloy with speed step design
90 gram trimmed weights allow much higher swing speed
TX-Tour
Stk. Code
TTTXTIR
TTTXTIS
TTTXTIX
Irons
j
j
Flex
R
S
X
Tip Dia.
.370
.370
.370
Butt Dia.
.600
.600
.600
Length (in)
41
41
41
Flex Pt.
High
High
High
Wgt. (gms)
107
108
109
Super light weight alloy
The TX-90’s counterpart, but with a High flex point
35
2005
Vista Pro Series
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
45
53
54
55
57
4.5
.335
.600
Low/Mid
L
A
R
S
X
46
65
65
65
65
65
4.5
.335
.335
.335/.350
.335/.350
.335
.590
Low/Mid
A
R
S
46
70
70
71
4.0
.335
.335/.350
.335/.350
.600
Mid
R
S
X
46
82
82
82
3.5
.335/.350
.335/.350
.335
.600
Mid/High
R
S
X
46
90
90
90
3.0
.335
.335
.335
.600
High
Flex
Vista Pro 50
Designed for the average player with a smooth tempo.
Vista Pro 60
Designed for the player who has an average tempo.
Vista Pro 70
Designed for the better than average golfer with an
average swing speed.
Vista Pro 80
Designed for a player that has a quicker tempo
Vista Pro 90
Designed for top amateurs and professionals with hard
Swings
(FVP)
L
A
R
S
Vista Tour Series
Vista Tour 60
Designed for a player with a better than average tempo
Vista Tour 70
Designed for top amateurs and pros with hard swings
(FVT)
Flex
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
R
S
X
46
65
66
67
3.5
.335
.600
High
R
S
X
46
71
72
73
3.5
.335
.600
High
Tour Platform Series
Flex
26.3
Designed for a more serious golfer, with a
higher swing speed
27.3 Designed for a more serious golfer, with a
higher swing speed
36.3 Designed for a more serious golfer, with a
higher swing speed
SIX
A
R
S
X
R
S
X
R
S
X
R
S
X
(FTPL)
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
46
67
3.8
.335
.600
Mid
46
72
3.8
.335
.600
Mid
46
62
3.0
.335
.600
High
46
51
53
55
4.5
.335
.600
Mid/High
3.0
.335
.610
High
4.1
3.9
4.2
.370
.605
Mid
Designed for a better player with an average tempo
Pro 95
S
X
46
91
94
Designed for pros with hard swings
Banzai HB
36
R
S
X
42
74
77
80
2005
Fujikura Speeder Shafts
Flex
Speeder 553
R
S
X
A
R
S
X
Excellent medium spin, medium launch
Speeder 569
Average-better player, average tempo,
slightly higher spin than Speeder 553
Speeder 652
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
3.4
.335
.610
Mid/High
4.4
.335
.595
Mid/High
59
60
62
53
54
55
56
46
46
CPM
260
275
280
245
255
265
275
R
S
X
46
65
66
68
3.7
.335
.615
Mid
260
275
285
R
S
X
46
74
77
79
2.5
.335
.615
Mid/High
270
280
290
S
X
46
85
86
2.5
.335
.625
Mid
280
290
Speeder 952
S
X
46
95
96
2.5
.335
.625
High
285
295
Speeder 904 H B
R
S
X
42
97
98
100
1.9
.335
.605
Mid/High
262
272
282
R
S
38" 5 Iron
95
96
2.5
.370
.585
Mid
329 5 Iron
339 5 Iron
Perfect ultralite shaft for medium swing
tempo
Speeder 757
Better player, quicker tempo, #1 money
winner on PGA Tour
Speeder 869
Excellent fairway shaft to match 757 driver
Higher launch angle to faster swing tempo
Higher launch angle to faster swing tempo
Speeder 717 Iron Sh aft
Quicker tempo, #1 money winner on PGA Tour
Pro Custom
Flex
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
Woods
A/L
R/S
48
68
70
5.0
.335
.595
.600
Mid
Irons
A/L
R/S
43
74
77
4.1
3.9
.370
.590
Mid
j Provides excellent custom fitting ability
j higher ball flight for longer drives and softer landings
ProLite Elite
Flex
Woods
R
S
Length
(in)
46
Wgt
(gms)
64
66
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
3.0
.335
.600
Mid/High
j The pro-Lite Elite has been the most successful shaft on tour
j Lower torque and longer parallel tip
37
2005
Raven’s Choice Graphite Shafts
Raven Low Torque
j Amazing quality for the price!
j A very durable shaft for all
types of players.
Flex
Torque
(deg)
Length
(in)
Weight
(gms)
Raw Freq
(CPM)
Tip
Par.
Wood
(RLTW)
S/X
R/S
L/A
4.50
4.50
4.50
46
46
46
81
78
76
245
235
225
6.5"
6.5"
6.5"
Iron
(RLTI)
S/X
R/S
L/A
4.00
4.00
4.00
41
41
41
74
72
70
285
275
265
5.0"
5.0"
5.0"
Flex
Torque
(deg)
Length
(in)
Weight
(gms)
Raw Freq
(CPM)
Tip
Par.
X
S
R
A
3.50
3.50
3.50
3.50
46
46
46
46
67
67
67
67
250
240
230
220
4.0"
4.0"
4.0"
4.0"
R/S
A/L
3.50
3.50
41
41
69
69
300
280
5.0"
5.0"
CPM Fit UltraLite
Wood
j Filament wound graphite.
(RVULW)
j Awesome consistency, plays like
steel
j Very light weight to increase
Iron
swing speed.
(RVULI)
j T-700 Graphite
The UltraLite is available in a black color in the R, S, and X shafts!
Platinum Extreme
j Filament wound graphite.
j Mid-weight for amazing
stability
Wood
(RVPEW)
Iron
(RVPEI)
Flex
Torque
(deg)
Length
(in)
Weight
(gms)
Raw Freq
(CPM)
Tip
Par.
R/S
A/L
3.50
3.50
46
46
86
86
245
225
5.5"
5.5"
R/S
A/L
2.80
2.80
41
41
85
85
295
275
5.0"
5.0"
Excelsior EX-Pro 75-4
Wood
Great blue shaft to match the
(EXP75W)
Excelsior woods and irons
Iron
j These iron shafts pair up
(EXP75I)
nicely with the Tour Beater
4.65 two-toned wood shaft
j
Flex
Torque
(deg)
Length
(in)
Weight
(gms)
Butt
Dia
Tip
Parallel
Bend
Point
A/L
R/S
4.5
4.5
46
46
73
75
.600
.600
5.0"
5.0"
Low
Low
A/L
R/S
4.0
4.0
40
40
71
73
.600
.600
5.0"
5.0"
Low
Low
Flex
Torque
(deg)
Length
(in)
Weight
(gms)
Butt
Dia
Tip
Parallel
Bend
Point
R/S
S/X
3.8
3.8
46
46
85
85
.600
.600
4.5"
4.5"
Mid
Mid
Tour Beater Pro 4.65
j
j
This shaft has a great
Wood
combination of low torque, light (TBP4)
weight, and a low/ mid bend point
Pair up with the Ex Pro 75-4 Iron
shaft
New Tour Red Hybrid Shaft!
Raven Tour Red 90.3
(RTR90W)
Wood
j
j
j
Perfect match for the Raven Red Hybrid
Head drivers and fairway woods
Low torque for the ultimate in accuracy
Hybrid shafts have reinforced tips for
more control.
38
Flex
Torque
(deg)
Length
(in)
Weight
(gms)
Butt
Dia
Tip
Parallel
Bend
Point
R/S
3.0
46
90
.600
4.5"
Mid
R
3.0
46
90
.600
4.5"
Mid
S
3.0
46
90
.600
4.5"
Mid
X
3.0
46
90
.600
4.5"
Mid
2005
j Combination of high modulus
graphite and steel alloy tip
j A lightweight shaft with the
consistency of steel
Driver
(TTBM)
BiMatrix
Flex
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
R
S
X
46
75
76
77
3.5
.335
.600
High
Putter Shafts
Striaght Stepless Putter
j
Weight
Tip Dia.
Butt Dia.
Length
120 g
0.370"
0.600"
37"
For use with a very wide variety of heads
Single Bend Stepless Putter
j
j
Weight
Tip Dia.
Butt Dia.
Length
120 g
0.370"
0.600"
37"
For 90 degree bore with no offset
Works for both right and left handed
putter heads
(PSSB)
Double Bend Putter
Weight
Tip Dia.
Butt Dia.
Length
112 g
0.370"
0.571"
35"
For heads with a built in lie angle
Works for both right and left handed
putter heads
j
j
(PSDB)
Mallet Bend Putter
Weight
Tip Dia.
Butt Dia.
Length
112 g
0.370"
0.571"
35"
(PSMB)
For 90 degree bore with offset
Right handed and Left Handed Available
j
j
Ski Pole Putter
j
Weight
Tip Dia.
Butt Dia.
Length
215 g
0.370"
0.600"
53"
Super long and heavy shaft for belly and
long putters
Black Aluminum Putter
j
Weight
Tip Dia.
Butt Dia.
Length
112 g
0.370"
0.570"
35"
Double Bend
39
2005
The New
Excelsior Series
shafts
Excelsior Pearl
j
j
j
An Ultralite weight shaft
with a low bend profile
Possesses a lively tip for
long high ball flight
All filament wound by
super accurate CNC
driven machinery
guaranteeing shaft to
shaft consistency
Woods
Irons
Flex
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
L (501)
46
50
5.0
0.335
0.600
Low
A (502)
46
50
5.0
0.335
0.600
Low
R (503)
46
50
5.0
0.335
0.600
Low
L (501)
40
52
3.8
0.370
0.600
Low
A (502)
40
52
3.8
0.370
0.600
Low
R (503)
40
52
3.8
0.370
0.600
Low
Flex
Length
(in)
Excelsior Emerald
j
j
j
Another CNC filament
Woods
R (653)
46
wound shaft
S (654)
46
Super low torque
6” parallel tip makes for great customization
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
65
2.8
0.335
0.630
Mid/High
65
2.8
0.335
0.630
Mid/High
Butt
Bend
Excelsior Sapphire
Flex
j
j
Length
Wgt
Torque
Tip
(in)
(gms)
(deg)
Dia.
Dia.
Pt.
The Sapphire shaft is
Woods
A (652)
46
64
2.8
0.335
0.600
Mid
designed for the oversized
R (653)
46
64
2.8
0.335
0.600
Mid
heads of today. The
S (654)
46
64
2.8
0.335
0.600
Mid
combination of low torque
and a mid bend profile make the Sapphire one of the longest hitting shafts on the market!
Excelsior Black Diamond
j
j
The Black Diamond is the
first shaft we developed
using the Vector Launch
Monitor in our Fitting
Center. It was designed
to maximize all launch
characteristics for
today’s woods and irons.
Woods
Irons
Flex
Length
(in)
Wgt
(gms)
Torque
(deg)
Tip
Dia.
Butt
Dia.
Bend
Pt.
L (501)
46
75
3.5
0.335
0.600
Mid/Low
A (502)
46
75
3.5
0.335
0.600
Mid/Low
R (503)
46
75
3.5
0.335
0.600
Mid/Low
S (504)
46
75
3.5
0.335
0.600
Mid/Low
L (501)
40
75
3.0
0.370
0.600
Mid/Low
A (502)
40
75
3.0
0.370
0.600
Mid/Low
R (503)
40
75
3.0
0.370
0.600
Mid/Low
S (504)
40
75
3.0
0.370
0.600
Mid/Low
40
2005
Accessories
Grip Tape
Grip Solvent
Conap Epoxy
j
j
Quick setup in 2 hours
Fully cured in 24 hours
j
Double sided tape 2” wide
by 36 yards, or 3/4” wide by
36 yards
j
j
j
j
Come with or without nozzle
Non-toxic, odorless
Re-usable bottle
Available in 4oz., 8oz, 16oz.,
32oz., And a gallon
Long or Quick Set
Epoxy (50Ml)
Glue Gun
j
Hardman Epoxy
j
j
j
Two-part quick set epoxy
Good for one or two clubs
j
Rubber Grip Clamp
Ferrules
ID/OD
Wood
ID/OD
Glue dispensing gun is
perfect for a frequent club
builder
Good for long set and quick
set epoxy
Both quick and long set
available for sale
Iron
.335/.470
.750” Double
Gold Ring
.375/.525
.750” Black
.335/.470
.750” Double
Red Ring
.375/.535
.750” Single
Gold Ring
.335/.470
.750” Double
Clear Ring
.375/.550
.500” Single
Clear Ring
.335/.550
.500” Single
Red Ring
.375/.550
.500” Single
Red Ring
.335/.550
.500” Single
Gold Ring
.375/.550
.500” Single
Gold Ring
.335/.470
.500” Black
.375/.550
.335/.480
.250” Black
.375/.535
j
Holds club in place for
easy gripping
Aluminum Extension
j
Extends club up to 3.5 in.
Available for steel and
graphite
.500” Black
.250” Black
41
2005
Accessories
Raven Golf offers a wide selection of shirts, hats, head covers and other accessories to
compliment your set of raven golf clubs!
Raven logo shirts are available in
black, white, and blue! Please call to
see what sizes are available. (Hats are
available in Red, Black, Khaki, or White
and are “one size fits all”)
The Raven golf towels are available
in black and white and come with a
metal clip for your bag!
Raven shop aprons are great for
staying clean in the shop, or for
anything else around the house!
Raven has new custom lie fitting boards! These boards are
made of durable hard plastic. They leave a perfect, easy to
remove mark on the bottom of the club every time.
Black or Burgundy
wood covers
Black neoprene mallet and
standard size putter covers
42
The Raven Staff and Stand bags,
made by Crospete, are
embroidered with the new Raven
logo! The stand bag offers
excellent stability and comes with a
double shoulder strap. The staff
bag is excellent for cart travel and
also comes with a single shoulder
strap. All bags are available in
many colors upon request!
2005
Trophies and Plaques
Raven offers a full selection of awards - including plaques, trophies and stand-up
awards. We have the capability to use your art or other logos and create custom
awards for any event, not just golf related! Baseball, soccer, football and golf are just
some of the sports we cater to! From one plaque to hundreds of trophies, Raven can
make it happen.
All these and many more are available. Please give us a call for more information!
43
2005
Here are the tip trimming instructions for almost every golf shaft on the market! Whether it be
graphite or steel we have the correct numbers for you! Use the numbers shown or slightly
deviate from them for even more customization! Good luck!
GRAPHITE IRON SHAFT INSTRUCTIONS
Iron Number
Pre-Flexed
Combo R/S for R Flex
Combo R/S for S Flex
Combo A/L for L Flex
Combo A/L for A Flex
1
2
3
4
5
6
7
8
9
PW
SW
0"
0"
2.0"
0"
2.0"
0"
0"
2.0"
0"
2.0"
.25"
.25"
2.25"
.25"
2.25"
.50"
.50"
2.5"
.50"
2.5"
.75"
.75"
2.75"
.75"
2.75"
1.0"
1.0"
3.0"
1.0"
3.0"
1.25"
1.25"
3.25"
1.25"
3.25"
1.50"
1.50"
3.50"
1.50"
3.50"
1.75"
1.75"
3.75"
1.75"
3.75"
2.0"
2.0"
4.0"
2.0"
4.0"
2.25"
2.25"
4.25"
2.25"
4.25"
STEEL IRON SHAFT INSTRUCTIONS
Iron Number
Pre-Flexed
1
2
3
4
5
6
7
8
9
PW
SW
0"
0"
2.0"
0"
2.0"
0"
0"
2.0"
0"
2.0"
.5"
.5"
2.5"
.5"
2.5"
1.0"
1.0"
3.0"
1.0"
3.0"
1.5"
1.5"
3.5"
1.5"
3.5"
2.0"
2.0"
4.0"
2.0"
4.0"
2.5"
2.5"
4.5"
2.5"
4.5"
3.0"
3.0"
5.0"
3.0"
5.0"
3.5"
3.5"
5.5"
3.5"
5.5"
4.0"
4.0"
6.0"
4.0"
6.0"
4.5"
4.5"
6.5"
4.5"
6.5"
GRAPHITE WOOD SHAFT INSTRUCTIONS
Wood Number
Pre-Flexed
1
3
5
7
9
0"
0"
2.0"
0"
2.0"
.5"
.5"
2.5"
.5"
2.5"
1.0"
1.0"
3.0"
1.0"
3.0"
1.5"
1.5"
3.5"
1.5"
3.5"
2.0"
2.0"
4.0"
2.0"
4.0"
NOTE: These numbers are for
standard length shafts.
Adjustments must be made
according to length.
Butt cut to length
STEEL WOOD SHAFT INSTRUCTIONS
Wood Number
Pre-Flexed
44
1
3
5
7
9
0"
0"
2.0"
0"
2.0"
.5"
.5"
2.5"
.5"
2.5"
1.0"
1.0"
3.0"
1.0"
3.0"
1.5"
1.5"
3.5"
1.5"
3.5"
2.0"
2.0"
4.0"
2.0"
4.0"
2005
The following guides can help you to determine which flex, length, and driver loft you should
be using. These are just basic guides to give you a rough idea as to where you stand. Further
customization can be done, but isn’t always necessary.
The following three charts will help to determine flex
in your driver and irons. Use just one, or use them all
and see how they compare.
Use this guide to help determine your optimum launch angle.
This helps predict driver loft!
Driver Loft Fitti ng Guide Bas ed on Ball Speed
Ball Speed (MPH)
170
160
150
140
130
120
110
100
Optimum Launch Angle
(Deg)
11 to 12
12 to 13.5
12.5 to 14
13 to 15
14 to 16
15 to 17
15.5 to 17.5
16 to 18.5
Optimum Back Spin (RPM)
2500 - 2700
2750 - 3200
3000 - 3300
3300 - 3550
3500 - 3800
3750 - 3900
3800 - 4050
3900 - 4200
This guide will help you figure out what the lengths of your clubs
should be. This is a universal way of determining length.
Wrist-to-flo or Measurement for Ini tial Club Leng ths
Wrist-to-floor
27" to 29"
29+" to 32"
32+" to 34"
34+" to 36"
36+" to 37"
37+" to 38"
38+" to 39"
39+" to 40"
40+" to 41"
41+" to 42"
over 42"
DriverLength
5-IronLength
42.5"
43.0"
43.5"
44.0"
44.5"
44.75"
45.0"
45.25"
45.5"
46.0"
46.0" and up
36.75"
37.25"
37.75"
38.25"
38.50"
38.75"
39.00"
39.25"
39.50"
39.75"
40.0" and up
Swing Speed w/
Driver
Recomended flex at swi ng
speed
115 or above
105 to 115
100 to 105
95 to 100
90 to 95
80 to 90
70 to 80
60 to 70
40 to 60
(X) Slightly Tip Trimmed
(X)
(S) Slightly Tip Trimmed
(S)
( R) Slightly Tip Trimmed
( R)
(A) Slightly Tip Trimmed
(A)
(L)
YDS carried with
driver
Recomended flex at
distance carried
260+
250
240
230
220
210
200
190
180
(X)
(S)
( R)
(A)
(L) Slightly Tip Trimmed
(L)
Iron used to
carry 150 yards
Reccomended flex at
distance carried
PW
9 Iron
8 Iron
7 Iron
6 Iron
5 Iron
4 Iron
3 Iron
(X)
(S)
( R)
(A)
(L)
45
2005
The New Line of Tools
The New Raven shaft extractor is just plain better than any other shaft extractor on the market!
The 2 ton hydraulic jack makes pulling any club apart extremely easy. It has a 4-way adjustable
spindle that will accept a .335, .350, .370 and a .400 shaft tip diameter. A spring loaded
clamping mechanism makes installing a club into the extractor a breeze. Two pins help guide
the hydraulic jack directly parallel to the hosel to insure the shaft will not bend during the pulling
process. The steel base is 3.75 by 6.5 by .5 inches. It can be bolted to a workbench or inserted
into a vise. The entire shaft extractor is made in the USA!
The new Raven grip clamp is a step above
anything else out there! Made of heavy
duty aluminum and steel, this grip clamp is
great for home or commercial use! 100%
of the grip clamp is made in the USA!
The Club Scout Frequency Analyzer is one
of the best out there. It’s small compact
size makes it easy to use just about
anywhere! It measures both frequency
and torque of a shaft. Everything shown
below is included! The Club Scout runs on
either a standard wall outlet or a 9 volt
battery, which makes it very portable or on
site club fitting!
Most durable on
the market!
46
2005
Portable Clubmaking and Fitting Trailer
Raven offers a full fitting and club making trailer for rental or sale. We love to have full demo and
fitting days at your place! We will bring our Vector Launch Monitor for easy fitting on your range. We
can do simple repairs, re-gripping, and many other tasks right on site. If you are looking to get your
own for your golf shop we can customize them to meet your specifications. Please give us a call to
find out more about these trailers and what they can do for you.
Raven now offers large format printing!
We now offer large and small scale printing
abilities! From vinyl graphics to posters to
custom medallions we can customize just
about anything you want! The printer offers
us these capabilities:
j
Custom Medallions
j
Posters
j
Banners
j
Decals
j
Vinyl Cutouts
j
T-Shirts
j
Advertising
j
Trophies
j
Plaques
j
Hole In One Awards
j
Many Many More!
Please give us a call to find out
more information on this new system!
47
Play a round with
a Redhead
The Raven Redhead SP-700 Beta Titanium
Wisconsin:
Raven Golf Headquarters
2865 S. Moorland Rd.
New Berlin, WI 53151
1-800-236-4566
P.O. Box 510335
New Berlin, WI 53151-0335
Florida:
Raven Golf Outlet
6800 Fruitville Rd.
Sarasota, FL 34240
1-800-573-8808
Australia - New Zealand:
M2M Golf National Pty. Ltd.
108 Huntingdale St.
Pullenvale QLD 4069
Brisbane, Australia
+61-7-33741612
Fax: +61-7-33741508
Raven also has distributers in:
Germany
Switzerland
New Zealand
Belgium
United Kingdom
Spain
Canada
Sweeden
Netherlands
PRSRT STD
US Postage
PAID
Columbus, OH
Permit No. 4416

Full Catalog 05 - Raven Golf Clubs

Transcription

Similar documents

cpr for the dead of night.

Monument Ave 10k Brochure

The Baby Club - Raven Golf Clubs

Specification Guide - Launch Distribution

building a loft - American Racing Pigeon Union

Product catalog - Raven Golf Clubs

Details - Cottage Cove at Asessippi

Sustainability in the metropolis

lror"**rW - Neighborhood House Association

to our Audio Recording brochure