exterior hardware

Transcription

exterior hardware

PAGE 1
EXTERIOR HARDWARE
Wipers & Accessories
233
Wipers
234 - 239
Windshield Wash Systems
240
Cleats, Chocks & Deck Pipes
241 - 245
Deck Fills
246 - 249
Rail Fittings
Rail Fittings
251 - 254
Handrails
254 - 255
Boat Top Fittings
255 - 257
Ladders, Steps & Non-Slip
258 - 262
Flags & Flag Holders
263 - 264
Ventilation
Blowers
265 - 266
Ventilators
266 - 271
Tank Vents
271 - 272
Deck Plates
273 - 274
Hatches & Portlights
274 - 278
Oceanair Shades
279
Hatch Adjusters
280 - 283
Moldings & Rub Rail
Molding / Rub Rail / Trim
285 - 289
Weather Seal
289
Stazo Marinedeck / Starboard
290
234
Speich Windshield Wipers
Speich from Italy is a
specialized high quality
manufacturer of wind shield
wiper blades, arms, motors, clear view units, control panels and
washing devices. They build according to demanding standards,
such as ISO 9002, and do work for such customers as the Italian
Navy.
Speich Nautic E Series
EXTERIOR HARDWARE
Type ‘E’ range of motors for small to
medium size boats with wiper arms up
to 550mm in length. This motor unit is available in 12 or 24 volts,
has two speeds, is a self-parking device and has variable wiping
angles (45°, 50° 60°, 70°, 80°, 90°, 100°, 110°).
SWP E-1238*
SWP E-1264
SWP E-1290*
SWP E-2438*
12V, 5-12 mm mounting thickness
*Request Item - Call to get delivery estimate
Speich Heavy Duty Wiper Systems
Heavy duty wiper systems for large yacht and commercial
applications. All systems are custom engineered for each situation.
Motor unit type M is designed to be used on medium sized
windscreen wipers installed on work boats for civil and military
applications. This motor has a variable wiping angle and it is
designed for heavy duty applications. Self-parking position, can
be set either left or right. Available rated voltage DC: 12V - 24V 110V - 220V, AC: 110V - 220V.
Motor unit type S is used with arms up to 1200mm and blades
up to 1300mm in length are needed. This motor has variable
wiping angle and it is designed for heavy duty applications. Selfparking position, can be set either left or right.
Motor unit type SF is used when it is necessary to employ
a powerful wiper with arms up to 1200mm and blades up
to 1300mm length. This motor units is equipped with an
electromagnetic brake in order to have a stable park position.
Speich Commercial Wiper Arms
All arms are custom made using AISI316 stainless steel with the
standard nish being hand-polished (Black arms are available on
request).
Speich Nautic 'LP' Series
Type 'LP' range is available for 12V and 24V DC, has two speeds,
is a self-parking device, and has a variable
wiping angle It’s easy to modify the motor
unit wiping angle and park position side
with the system already installed.
SWP LP-1240*
SWP LP-2440*
12V 40 mm±5
24V 40 mm±5
Speich Commercial Wiper Arms
•
•
•
•
•
Adjustable between 11 and 22"
Fits on any 1/2" shaft
316 S/S with brushed nish
Very heavy duty
Fits standard blades
SWP E-95-P
SWP E-95-F
Pantographic Style
Pendulum Style
Rocker switch.
SWP ESB
12 - 24 V
Speich Commercial Wiper Blades
Available in three styles:
• MG series for all at surfaces 300,350,400,450,500mm lengths
• AR series for at and curved surfaces (anti ice cover). 390,
470mm lengths
• BH series for at and curved surfaces 600, 700, 800, 1000mm
lengths
Please call us or visit www.speich.it for more information
Speich Clear View Screen
SPEICH Clear view screens
keep a glass disk free from
rain, snow or sea-water by fast
rotation. The motor is placed
in the centre and is fastened to
the xed glass so as to obtain
the largest possible eld of
vision. This particular assembly
also makes the unit water
and airtight, thus making it
suitable for pressurised and airconditioned bridges. All metal parts are made of brass.
SWP AC38S.H-24V*
Heated screen 24V
Windshield Wipers
AFI Heavy Duty Wiper Motors
AFI “MRV” Heavy Duty Wiper Motors
AFI HD 1.5 Wiper Motors
• Powers a 22” Deluxe arm and Deluxe blade combination or a
20” Premier arm and Premier blade combination
• Includes 5 amp fuse and holder
• Measures approximately 7-3/4” L x 4” W x 2-3/4”
1” Shaft, 110°
2”Shaft, 110°
1” Shaft, 80°
2” Shaft, 80°
Parts:
C/H 75212-04
AFI 33025
AFI HD 2.5 Wiper Motors
• Powers a 26” Deluxe arm and Deluxe blade
combination or a 24” Premier arm and Premier
blade combination
• Measures approximately 7-7/8” L x 4-1/4” W x 3”
AFI 82011
AFI 82012
AFI 82081
AFI 82082
1” Shaft, 110°
2” Shaft, 110°
1” Shaft, 80°
2” Shaft, 80°
AFI 1000 Series Heavy Duty Wipers & Kits
Waterproof housing made of stabilized high
impact thermal plastic. Maximum current
draw- 5 amps. Up to 16" x 16" arm x blade
combination recommended. Kit includes
#31012B 14" polymer blade and #33007
deluxe adjustable arm. Self parking left or
right.
• 12 volts
• 6-5/8" L x 3-3/8" W x 2" H
• 3 year warranty
Description
Shaft
Dia.
Shaft
Length
Sweep
AFI 37100
Frame mount kit
5/8"
2-1/2"
80o
AFI 37200
Frame mount kit
5/8"
2-1/2"
110o
AFI 37110
Motor only
5/8"
2-1/2"
110o
AFI 37180
Motor only
5/8"
2-1/2"
80°
Part #
• 5/8" Diameter shaft
• Left or right parking
• Accommodates blades 16" to 24"
• 12 Volt draws max., 3.5 amp
• 2 Speed motor
• Selectable 45o, 60o, 80o or 110o sweep
• Compact size- 7-7/16"L x 4"W x 2"H
• 12 volts
• 3 year warranty
• Not recommended for exterior use
AFI 34000
12 Volt, 2-1/2" Shaft, 80°
AFI 34001
12 Volt, 1-1/2" Shaft, 80°
AFI 34005
12 Volt, 3-1/2" Shaft, 80°
AFI 34011
12 Volt, 1-1/2" Shaft, 110°
AFI 34210
24 Volt, 2-1/2" Shaft, 110°
Requires the use of a three position switch.
3-Position switch (Off/Park-Low-High)
Motor cover White
EXTERIOR HARDWARE
Common features:
• Fully sealed powder coated aluminum
waterproof base and housing
• Factory preset sweep angles of 80° or 110°, with easy
adjustment to 45° or 60°
• Chrome plated solid brass knurled drive nut with brass and
stainless steel drive shaft
• Two speed motor
• Sealed 6” wire leads, 16 AWG
• Adjustable right or left self parking (coast to park)
• 5/8” diameter shaft (16mm)
• RF shielded circuitry lters noise from electronics
• 12 volts
• 3 year warranty
AFI 71011
AFI 71012
AFI 71081
AFI 71082
235
236
Windshield Wipers
EXTERIOR HARDWARE
Windshield Wipers
AFI Model AFI-500
Standard Wipers & Kits
AFI Premier S/S Wiper Arms
• 316 Stainless Steel and brass construction
• Features “Articulating/Bend-Back” design that locks
the arm in an upright position for window cleaning
• Chrome plated solid brass motor shaft mount with set
screw for a secure installation
• Fit on 5/8” shafts
*Wet version has a built-in, two sided spray head and
hose (with 18” lead).
Premier Arms:
Waterproof housing made of UV
stabilized, high-temperature, high-impact
thermoplastic.
• Maximum current draw: 2 amps
• Includes 11" deluxe curved blade 33004
and deluxe adjustable arm 33006AS
• Adjustable sweep right or left
• Self parking
• 12 volts
Shaft
Length
Sweep
AFI 30004
Frame mount kit
1/2"
2-1/2"
80o
AFI 30005
Frame mount kit
1/2"
2-1/2"
110o
Parts:
AFI 33000
Deck mount adapter for wipers w/ 1/2" shaft
AFI 33082
AFI 33082W
AFI 33084
AFI 33084W
AFI 33086
AFI 33086W
AFI 33088
10" - 12"
10" - 12" Wet
15" - 20"
15" - 20" Wet
20" - 25"
20" - 25" Wet
25" - 30"
Pantographic Premier Arms:
AFI Model WMW Standard Wiper Kit
Totally sealed, 100% water resistant wiper. The corrosion
resistant case and shaft housing are made
of heavy, chrome-plated brass. Front plate
and wiper shaft are manufactured from
stainless steel.
• Includes 11" deluxe curved blade
33004 and deluxe adjustable arm
33006AS
• Max. current draw: 5 amps
• 12 volts
Part #
AFI 30002
Parts:
AFI 33000
Description
Shaft
Dia.
Shaft
Length
Sweep
Frame mount
3/8"
2-1/2"
110°
AFI Model STD Standard Wiper Kits
Allows for use of deluxe arms on 30000
and 32000 series wiper motors.
AFI Deluxe S/S Wiper Arms
• Fit on 5/8" shafts
• Articulating/bend back feature
• Set screw motor shaft clamping
AFI 33006A 6-3/4" to 10-1/2"
AFI 33007A 10" to 14"
AFI 33010A 14" to 20"
Pantographic Wiper Arms
• Adjustable pantographic stainless steel arm
AFI 33032A
AFI 33037A
Description
Shaft
Dia.
Shaft
Length
Sweep
AFI 32000
Frame mount
3/8"
2-1/2"
80o
AFI 32001
Deck mount
1/2"
3-1/2"
80o
AFI 32002
Frame mount
3/8"
2-1/2"
110o
Parts:
AFI 33000
Parts:
AFI 33008
12" - 17"
12" - 17" Wet
17" - 22"
17" - 22" Wet
22" - 26"
26" - 30"
• Black epoxy coated stainless steel
AFI 33012A* 10" to 14"
AFI 33014A* 14" to 20"
• Case construction is of
corrosion-proof, aluminum alloy
• Base plate and mounting plate
are naval brass with heavy
chrome plating
• Black crackle, nonre ective
nish
• Includes 11" deluxe curved blade
33004 and deluxe adjustable arm 33006AS
• Self parking
• Not waterproof - Interior installations only
• 12 volts
Part #
AFI 33090
AFI 33090W
AFI 33092
AFI 33092W
AFI 33094
AFI 33096
12" to 17"
17" to 22"
EXTERIOR HARDWARE
Description
Shaft
Dia.
Part #
237
238
Windshield Wipers
AFI Polymer Wiper Blades
Deluxe style - curved blade. These wipers are developed
speci cally for marine use. The wiper is made of glassimpregnated poly and will never rust. Utilizes marine grade rubber
squeegee for long life. Black.
AFI 31012B
AFI 31014B
AFI 31016B
AFI 31018B
AFI 31020B
AFI 31022B
AFI 31024B
12"
14"
16"
18"
20"
22"
24"
EXTERIOR HARDWARE
AFI Premier S/S Wiper Blades
• Marine grade silicone squeegee
• Multiple 'claws' help spread pressure evenly
• Made from 316 stainless steel
AFI 33021S
AFI 33022S
AFI 33024S
20"
22"
24"
AFI Deluxe S/S Wiper Blades
• Curved blade
• "Slide and Lock" system
AFI 33004
AFI 33005
AFI 33015
AFI 33016
AFI 33017
11"
14"
16"
18"
20"
AFI Classic Straight S/S Wiper Blade
Replaces blades on boats
manufactured before 1990.
Straight - Hook & Catch.
• Not for use with AFI deluxe
and standard arms
AFI 33901
11"
United Technologies
208 & 212 Series Wiper Motors
• Oscillating wiper motor produces 5.9 lbs (208) &
8.85 lbs (212) of torque
• RFI suppression lter noise from electronics
• Available in 65°, 85° or 110° sweeps
• Con gurable in a clockwise or counterclockwise park
• 1", 2" and 3" shaft lengths available
• Brass pivot body
• Stainless steel pivot shaft
• 12 Volt
• Marine grade speci cations
• 208 Series L: 8.3" x W: 4.01"
• 212 Series L: 8.33" x W: 3.82"
Shaft
Sweep
Max.
Blade
UTP AMP-208-2000
1"
65°
18"
UTP AMP-208-2001
1"
85°
17"
UTP AMP-208-2003
1"
110°
15"
UTP AMP-208-2200
2"
65°
18"
UTP AMP-208-2201
2"
85°
17"
UTP AMP-208-2203
2"
110°
15"
UTP AMP-212-2000
1"
65°
22"
UTP AMP-212-2001
1"
85°
20"
UTP AMP-212-2003
1"
110°
18"
UTP AMP-212-2200
2"
65°
22"
UTP AMP-212-2201
2"
85°
20"
UTP AMP-212-2203
2"
110°
18"
UTP AMP-212-2400
3"
65°
22"
UTP AMP-212-2401
3"
85°
20"
UTP AMP-212-2403
3"
110°
18"
Part #
Windshield Wipers
United Technologies Wiper Motors
Parts exposed to the weather are corrosion resistant. An `O' ring
between the shaft and bearing stud prevents water from entering.
• Preset for 110o sweep (adjustable 85o, 100o, or 120o)
• 12 Volt
• Shaft diameter: 5/8"
• Not self parking
Part #
Shaft Length
UTP WWF 12C18 710
1"
UTP WWF 12C18 720
2"
UTP WWF 12C18 730
3"
239
United Technologies Adjustable Wiper Arms
•
•
•
•
•
Made of stainless steel at wire
Flip back for cleaning
Black nish
Hook blade connection
Rotatable head
UTP AMP-341-5001
UTP AMP-341-5002
11" to 15.5"
14.5" to 19.5"
United Technologies Pantographic
Wiper Arms
This wiper motor has the same quality features as the above WWF
motors. It also has an integral on-off switch
Preset at 65° (adjustable to 85°, 100°, 110° and 120°)
• Not self parking
Part #
14" Arm
14" Arm w/ adapter*
16" Arm
16" Arm w/ adapter*
18" Arm
20" Arm
22" Arm
*Includes adapter AMP-305-1015 for breglass mounting with
self-tapping screws.
Shaft Length
UTP WWF 12C19 710
1"
UTP WWF 12C19 720
2"
United Technologies Wiper Arm & Blades
Top quality stainless steel construction.
Straight blades for at windshields.
UTP LE-721156S
UTP BD-721020-12"
UTP BD-721020-14"
UTP AMP-341-1140
UTP AMP-341-1141
UTP AMP-341-1160
UTP AMP-341-1161
UTP AMP-341-1180
UTP AMP-341-1200
UTP AMP-341-1220
10" - 14" adjustable arm
Straight blade
Straight blade
United Technologies Flex Wiper Blades
• Flexible for curved or at glass
• Re llable molded wiper elements
• Galvanized frames, powder coated
UTP AMP-302-1120
UTP AMP-302-1140
UTP AMP-302-1160
UTP AMP-302-1180
UTP AMP-302-1200
UTP AMP-302-1220
UTP AMP-302-1280
12"
14"
16"
18"
20"
22"
28"
Parts:
UTP AMP-305-1015
UTP AMP-305-1021
UTP AMP-312-1035*
UTP AMP-313-1016
UTP AMP-313-1019*
UTP AMP-314-1009
UTP AMP-334-1008
UTP AMP-334-1009
UTP AMP-334-1012
UTP AMP-404-1001
*Request Item
Pantographic adaptor breglass
Pantographic adaptor metal & glass
4 Litre washer bottle
Fitting kit
Wet kit for arms
50' x 3/16" ID hose
Black motor cover w/ switch
Black motor cover
Sand motor cover
3/16" x 3/16" x 3/16" hose T
EXTERIOR HARDWARE
• Made of stainless steel at wire
• Flip back for cleaning
• Includes mounting bolt and nut
240
Windshield Wipers / Wash Systems
Sea-Dog Marine Windshield Wiper
Tridon All-Season Wiper Blades
These wiper blades handle any type of weather. They won’t
rust or bend out of shape, prolonging the life of the blade.
Easy installation, features a pre-attached adaptor that ts 95%
of all arm types directly. Also equipped with a poly-coated
squeegee, delivering a streak-free wipe every time, and new
aerodynamic design helps resist wind lift.
•
•
•
•
•
Self parking windshield wiper
Stamped 304 stainless cover
Pre-wired for 12 volt DC systems
110o sweep
1/4" shaft
EXTERIOR HARDWARE
SED 410810-1
SED 410811-1
Motor only
Complete kit. 8"-12" arm with 11" blade
Sea-Dog Removable Manual Windshield Wiper
Injected molded nylon/formed 304 stainless.
Wiper removes easily from windshield in
seconds. Includes 11” lexan blade.
SED 412605-1
Sea-Dog Manual Windshield Wiper
Combination chromed brass & stainless steel construction, comes
with an 11" blade. For up to 1-5/16" panel thickness.
SED 412601-1
Perko Hand Windshield Wiper
For straight and curved windshields.
Stainless steel arm and blade holder,
other parts chrome plated zinc. Arm
can be extended from 6-3/4" to 10-1/2". 3/8" shaft diameter. 1-1/8"
maximum panel thickness. Handle length 2-3/8". Blade length 12".
PER 533-DP-STS
TRI AS-11
TRI AS-13
TRI AS-15
TRI AS-16
TRI AS-24
11"
13"
15"
16"
24"
AFI Windshield Washer Kit
Kit includes everything needed for the
installation of a washer system on two AFI
Deluxe wiper arms.
Includes: water tank, 12V pump motor, two
thru-deck nozzles, tee tting, two spray
nozzles, 16’ of below deck clear plastic
tubing, and 8’ of above deck black tubing. Also includes 4 clips to
attach tubing to the extension portion of wiper arm, and 4 clips to
attach tubing to the main portion of the arm.
• Designed to install on AFI Deluxe wiper arms and blades
(may not be compatible with other brands)
• Easy to install using basic tools
• Each spray head has four adjustable nozzles
• Spray nozzles snap onto the end of the wiper arm providing
complete spray coverage
• Water tank capacity: 3 Litres/3.2 quarts
• Water tank dimensions: 9-1/4” H x 7” W x 4-1/2” D
User supplied items needed for installation: 3A fuse and carrier, 3A
minimum momentary on/off switch, and black and white stranded
wire.
AFI 33505
Pop-Up Cleats
241
Whitecap E-Z Push-Up Cleats
No saw needed to install, just drill & drop into place. Stainless steel construction.
Part #
A
B
C
D
E
F
WHI 6804C
5-1/7"
1-1/8"
3-5/16"
WHI 6809C
6-1/2"
1-1/2"
3-9/16"
WHI 6810C
8-3/4"
1-5/8"
4-9/16"
Max. Rope
4-1/2"
3/4"
5/16"
1"
6"
7/8"
3/8"
1-1/4"
8"
1-1/8"
3/8"
1-1/2"
Attwood Pull-Up Cleats
Description
A
B
C
D
ATT 66512-7
Part #
4-1/2"
5-1/4"
4-1/2"
3-1/8"
2"
ATT 66516-7
6"
7"
6"
3-1/3"
2-3/8"
ATT 66524-1
8"
8-1/2"
7-3/4"
3-7/8"
2-13/16"
Drainage Receptacle For 4-1/2" Cleat
ATT 1484-1
Attwood Stainless Steel Neat Cleats
This all-new cleat is retractable, with a slim pro le that installs easily on narrow gunwales. The cleat
stays up when pulled up and, when lowered, it is only 1/2" above deck. It has a neat, continuous
contour to prevent snags and stubbed toes. Each post is a 7/16"-thick rod of solid stainless steel.
Drainage receptacles (included) press- t onto the threaded studs to capture moisture and send it to the
bilge. The receptacle outlet is sized for standard 1/4" pitot tubing (not included).
Part #
A
B
C
D
E
F
G
ATT 66515-7
4-1/2"
1-5/16"
1/2"
1-5/8"
1-1/4"
1-3/4"
3"
ATT 66517-7
6"
1-1/2"
1/2"
1-5/8"
1-1/4"
2-1/4"
3"
Accon Marine
Folding Stainless Cleats
• Mounts on surface of boat
• No cut-outs or hole saws required
• Cleat locks down when not needed,
and springs up when locking slide is retracted
• No drain tubes or drain receptacles required
• Constructed of marine grade 316 cast stainless steel (screws not supplied)
ACC 333-4
ACC 332-6
2-3/8" x 6-1/4"
3-1/4" x 7-1/2"
Sea-Dog Folding Stud Mount Cleat
Investment cast 316 stainless steel
construction.
SED 041404-1
EXTERIOR HARDWARE
This cleat recesses ush to the deck for a clean, contemporary look at an affordable price. Corrosion-resistant 316 stainless
steel construction. Water-resistant cleat recesses into cast body, and is captured with lubricated seals.
• Easy to operate–simply pull up the cleat from its body
• Designed for safety–cleat recesses below deck when not in use
• Water resistant–cleat recesses into cast body and is captured with rubber seals and ball detents
• Durable–cast stainless steel construction and simple design assures long-life and dependable operation
• Stud mount, ush cleat
242
Pop-Up Cleats / Cleats
Whitecap Pop-Up Cleat
Sea-Dog Open Base Cleat
Spring loaded cleat can be mounted horizontally
or vertically. Holds fenders, when open and is only
5/8" high when closed. Requires (3) 3/16" fasteners.
WHI 6970C
Marine Hardware
S/S Hollow Base Cleats
• Die cast zinc, chrome plated
• These cleats are interchangeable with Perko style 1188 cleats
EXTERIOR HARDWARE
Manufactured in 316 S/S and polished for extremely bright nish.
100,000 pounds of tensile strength. Holes machine drilled and are
counter sunk for at or oval head fasteners.
• 8" cleat, height: 1-3/4"
• Uses 1/4" F.H. fasteners
MHI SSCL66010
• 10" cleat, height: 2"
• Uses 5/16" F.H. fasteners
Part #
A
B
C
D
Fastener
SED 044604-1
4"
1-1/4"
1-1/2"
1-1/16"
#10 FH
SED 044606-1
6"
1-9/16"
2-1/4"
1-3/16"
#10 FH
SED 044608-1
8"
1-13/16"
3-1/4"
1-7/16"
1/4" FH
SED 044610-1
10"
2"
4"
1-11/16"
1/4" FH
Sea-Dog Low Pro le S/S Cleats
MHI SSCL66011
Marine Hardware Stainless Steel Cleats
Highly polished investment cast 316 S/S
cleats for mega yacht application. Euro
style.
• Uses 5/16" fasteners
MHI SSCL66012-4HE
MHI SSCL66015-4HE
MHI SSCL66018-4HE
• Investment cast 316 stainless steel
12”
15”
18”
Part #
A
B
C
D
Fastener
SED 041906-1
SED 041908-1
6"
1-1/4"
2-1/16"
1-5/8"
1/4" FH
8"
1-11/16"
2-1/4"
1-5/8"
1/4" FH
Sea-Dog Closed Base Cleats
Sea-Dog Herreshoff Pattern S/S Cleats
• Polished cast brass
Investment cast 316 stainless steel.
Part #
A
B
C
D
Fastener
SED 041604-1
4"
5/16"
1-3/4"
1"
#10 FH
SED 041605-1
5"
1-1/8"
2-1/8"
1"
#10 FH
SED 041606-1
6"
1-1/4"
2-1/4"
1-1/8"
1/4" FH
SED 041608-1
8"
1-1/2"
2-13/16"
1-3/8"
1/4" FH
SED 041610-1
10"
1-7/8"
3-5/8"
1-3/4"
5/16" FH
SED 041612-1
12"
2-1/8"
3-3/4"
1-7/8"
5/16" FH
Part #
A
B
C
D
Fastener
SED 042103-1
3-3/16"
13/16"
11/16"
9/16"
#6 FH
SED 042104-1
4"
1"
3/4"
1-11/16"
#12 FH
SED 042105-1
5"
1-1/4"
1"
1-15/16"
#12 FH
Sea-Dog Line Cleats
Heavy Duty:
SED 041708
8"
2"
3-5/16"
1-3/4"
1/4" FH
SED 041710
10"
2-3/8"
3-3/4"
1-7/8"
5/16" FH
• Made from polished cast brass
Part #
A
B
C
D
Fastener
SED 672110-1
2-1/2"
1/2"
1/2"
1"
#6 FH
SED 672115-1
4-1/16"
3/4"
11/16"
1-1/2"
#8 FH
243
Cleats
Perko Streamline Cleats
Sea-Dog 4-Hole Cleats
• Chrome plated zinc. 2 per card
Part #
• Die cast zinc chrome plated
Part #
A
B
C
D
Fastener
SED 044104-1
4-1/2"
1-1/16"
1-3/4"
1-3/16"
#8 FH
SED 044106-1
6"
1-3/8"
2-3/16"
1-9/16"
#10 FH
Length
Base Size
Max Line
PER 566-DP2-CHR
2"
2-3/16" x 1-1/8"
5/16"
PER 566-DP3-CHR
3"
3-1/8" x 1-1/2"
3/8"
PER 566-DP4-CHR
4-1/2"
4-7/16" x 1-7/8"
1/2"
Perko Open Base Cleats
Chrome plated zinc with black plastic base.
New streamlined appearance.
• Length: 5-3/4"
• Base: 3-5/8" x 7/8"
• Max rope size: 1/2"
• Chrome plated zinc
• Stainless steel 1/4" x 2" studs, nuts & washers
Part #
PER 1326-DP2-CHR
Length
Base Dimension
Max Line
PER 1210-004-CHR
4"
2-1/8" x 1-1/2"
5/16"
PER 1210-006-CHR
6"
3" x 1-3/4"
7/16"
Attwood Hollow Base Cleats
Perko Cast Aluminum Cleats
• Die-cast ZAMAK with dual nickel
and chrome plating. 2 per card
Part #
Length
Fasteners
ATT 6244-6
4-1/2"
#8
ATT 6245-6
6"
#10
• Plain aluminum nish
Part #
Perko Chrome Cleats
• Chrome plated zinc/black plastic
• Closed base type
Length
Base
Length
Max
Line
Base Size
Screw
Size
PER 530-008-ALU
8"
4" x 2-1/4"
3/4"
1/2"
PER 530-010-ALU
10"
4-1/2" x 3"
7/8"
1/2"
PER 530-012-ALU
12"
6-1/2" x 2-7/8"
1"
5/8"
L
Max
Line
Screw
Size
3"
1/4"
#8
Perko Cast Aluminum Cleats
Max Line
Fastener
Qty
3/8"
#10
2/card
1/2"
1/4"
1/card
PER 1305-DP1-CHR
4-1/2"
3-3/4" x 1-1/16"
PER 1305-DP2-CHR
6"
5" x 1-3/8"
• Plain aluminum nish
Part #
• Chrome plated zinc/black plastic
• Open base type
Base
Max Line
Fastener
2-1/2" x 1-1/16"
3/8"
#10
2/card
1/2"
1/4"
1/card
PER 1306-DP2-CHR
6"
3-1/2" x 1-3/8"
PER 545-DP3-ALU
2/CD
1-1/2" x 5/8"
PER 545-DP4-ALU
2/CD
1-5/8" x 3/4"
4"
5/16"
#10
PER 545-DP5-ALU
2/CD
2" x 7/8"
5"
3/8"
1/4"
PER 545-DP8-ALU
1/CD
8"
5/8"
1/4"
Open Base
Qty
PER 1306-DP1-CHR
4-1/2"
Base Size
Closed Base
Perko Chrome Cleats
Length
Pack
► Also See:
2-5/8" x 1-7/8"
Dock Cleats pg 856-857
EXTERIOR HARDWARE
Perko Chrome Open Base Cleat
244
Cleats / Chocks
Sea-Dog Aluminum Cleats
Marine East Nylon Cleat
Strong black nylon cleat is UV
resistant.
• Length 3.420" x Height 0.78"
• Sand cast aluminum
Part #
MEP 2100
Length
Height
Fastener
Style
SED 046106-1
6"
1-3/8"
1/4" FH
Closed base
SED 046108-1
8"
1-7/8"
5/16" FH
Open base
SED 046110
10"
2-1/4"
3/8" FH
Open base
EXTERIOR HARDWARE
Sea-Dog Nylon Open Base Cleats
Sea-Dog Nylon Heavy Duty Cleats
• Injection molded nylon
• 2 per card
Part #
• Injection molded nylon
Part #
A
B
C
D
Fast
Black
SED 043030
3"
1-1/16"
1"
1-5/8"
#6 FH
SED 043030-1*
3"
1-1/16"
1"
1-5/8"
#6 FH
SED 043040-1*
4"
7/8"
1-1/8"
2"
#8 FH
SED 043050
5"
1-1/16"
1-7/16"
2-1/2"
#10 FH
SED 043080-1*
8"
1-11/16"
2"
3-3/8"
1/4" FH
SED 043031
3"
1-1/16"
1"
1-5/8"
#6 FH
SED 043041
4"
7/8"
1-1/8"
2"
#8 FH
SED 043051
5"
1-1/16"
1-7/16"
2-1/2"
#10 FH
A
B
C
D
Fast
SED 043340-1
4-1/4"
1"
1-1/4"
1-3/4"
#10 FH
SED 043360-1
6-1/16"
1-1/4"
1-9/16"
2-1/4"
#6 FH
SED 043380-1
8-1/16"
1-3/4"
2-1/4"
N/A
#8 FH
Sea-Dog Stainless Steel Bow Chock
• Investment cast 316 stainless
• Sold in pairs
• Uses #10 FH fasteners
SED 060040-1
* 2/CD
White
Clam Cleats pg 769
► Also See:
Sea-Dog Stainless Steel Straight Chocks
Forespar Marelon Cleats
Molded from high-strength
Marelon® for strength, light weight
and low cost. The use of Marelon®
allows these cleats to take up the
curve of a deck without breaking,
while maintaining strength and resisting abrasion - will not soften
on hot days or freeze in winter.
Part #
Length
Hole Dia
FRS 941018
3"
5/32"
FRS 941016
4"
3/16"
FRS 941013
5"
3/16"
FRS 941014
6-1/2"
1/4"
FRS 941015
8"
1/4"
• Sold by the each
Part #
A
B
C
D
Fast
SED 060200-1
5"
3/4"
1-1/16"
3-15/16"
#10 FH
SED 060210-1
6"
1"
1-13/16"
5"
1/4" FH
Sea-Dog Zinc Skene Chock
• Die cast zinc, chrome plated
• Sold in pairs
SED 064030-1
Chocks / Hawse Pipes / Deck Pipes
Perko Plastic Rope Deck Pipes
Sea-Dog Nylon Skene Chock
Fibre reinforced, U.V. stabilized plastic deck
pipe with a hinged, snap-down cover.
• For ropes up to 7/8"
• Flange diameter: 3-3/4"
• Use #8 screws
• Injection molded black nylon
• Sold in pairs
Part #
A
B
C
D
Fast
SED 067360-1
4-1/2"
7/16"
1/2"
3-5/8"
#10 FH
PER 1057-DP-BLK Black
PER 1057-DP-WHT White
Perko Rope Deck Pipe
Chrome plated zinc
For rope up to 1" diameter
Flange diameter: 3-3/8"
Uses #8 fasteners
PER 757-DP-CHR
• Sold in pairs
Part #
A
B
C
D
Fast
SED 060060-1
4-1/2"
13/16"
11/16"
3-15/16"
#10 FH
SED 060065-1
6"
1-1/8"
13/16"
4-5/8"
1/4" FH
Sea-Dog Rope Deck Pipe
•
•
•
•
Chrome plated brass
For rope up to 1" diameter
Dia: 3-1/8" x Centre: 1-1/2"
Uses #8 FH fasteners
Perko Mooring Bit
SED 322080-1
Chrome plated bronze hollow mooring bit.
• Uses 1/4" bolt fasteners
• 4-1/4" x 4-1/4" x 3-1/2"
Sea-Dog Stainless Steel Hinged Deck Pipe
PER 608-002-CHR
Sea-Dog Hawse Pipe
• L: 5-1/2" x W: 2-1/2" x D: 7/8"
SED 328160
Sea-Dog Hawse Pipe
• L: 9-1/4" x W: 2-7/8"
SED 328170
Investment cast 316 stainless, hinge prevents
loss of cap.
• Uses #10 FH screws
• L: 5-5/8" x W: 4-1/16" x Centre:2-3/4"
SED 321805
Sea-Dog Chrome Brass Chain Deck Pipe
Comes with cap tether chain, cap securing
hook, and rubber gasket.
• For maximum 3/8" chain and 1" rope
• L: 6-1/4" x W: 4-1/2" x Centre: 2-1/4"
SED 322070
Parts:
SED 322075-1
Replacement cap and chain only
Sea-Dog Stainless Steel Chain Deck Pipe
Perko Hawse Hole Plate
Cast bronze, chrome plated
Spigot: 1-1/4"
Outside dimensions: 4-1/4" x 6"
Inside dimensions: 2-1/8" x 4-1/8"
Uses #1/4" fasteners
PER 752-000-CHR
Investment cast 316 stainless, comes with
cap tether and cap securing hook.
• L: 5-5/8" x W: 4-1/16" x Centre: 2-1/2"
SED 321800
Parts:
SED 321810-1
Cap & chain
EXTERIOR HARDWARE
•
•
•
•
Sea-Dog Stainless Steel Skene Chocks
•
•
•
•
•
245
246
Deck Fills
Perko Chrome Deck Fills
Perko Plastic Gas Fill
Chrome plated zinc and black plastic, impervious to
fuel. Complete with grounding lug and screw. Cap
has integral retainer and has a gasket to assure water
tightness.
• Overall diameter: 3-1/8"
• Hose size: 1-1/2
Black plastic, bre reinforced, U.V. stabilized. Easy-grip
cap comes with O-ring and integral retainer. No deck
plate key required.
• Takes 1-1/2" I.D. hose
• O.D. 3-1/16"
• Length neck 2-7/16"
PER 1313-DP-CHR
PER 126-DP-BLK
Gas
Spare Cap
Chrome Locking Gas Fill
EXTERIOR HARDWARE
Same as above but with locking feature.
PER 1399-DP-CHR Gas
Parts:
PER 1324-DP0-BLK
Spare locking cap
Perko Chrome Locking Gas Cap
• Locking caps come with 2 keys
• Fits Perko 1313 & 1399 series lls & Mirax
M-79 & Tempo 109 DPF lls
PER 1324-DP0-BLK
Spare locking cap
Perko Chrome Locking Gas Cap
• Locking caps come with 2 keys
• Fits Perko 0520, 0527, 0528, 0557, 0599 & 1270
series lls
PER 1324-DP1-BLK
Spare locking cap
Perko Deck Fills For Hose
Chrome plated bronze. Fill type marked on ange. Cap has slot
between holes, O-ring and integral retainer. Comes with deck key.
• Fits 1-1/2" I.D. hose
• Length neck: 3-1/2"
PER 520-DPD-CHR
PER 520-DPG-CHR
PER 520-DPW-CHR
PER 507-DP-CHR
Diesel
Gas
Water
Waste (No retainer on cap)
Parts:
PER 520-DP-99A
PER 513-DP8
PER 507-DP-99A
PER 1324-DP1-BLK
Spare cap and O-ring
Spare O-rings 2/pkg
Spare waste cap & O-ring
Spare locking cap
Perko Fuel Fill Replacement Cap
• Replacement cap and O-ring ts Perko 528
series 1-1/2" fuel/water lls for pipe.
PER 528-DP8-99A
PER 513-007
Cap
O-ring 2/pkg
PER 1613-DP-BLK
Parts:
PER 513-DP8
Spare o-ring, 2/pkg
Perko Deck Fills For Hose
Chrome plated zinc. Fill type marked on ange and cap. Black
plastic caps have a slot between holes, O-ring and integral retainer.
Comes with deck key.
• Fits 1-1/2" hose
• Length neck: 2-1/2"
PER 1270-DPD-CHR
PER 1270-DPG-CHR
PER 1270-DPW-CHR
PER 1269-DP-CHR
Parts:
PER 1269-DP-99A
PER 1270-DPG-99A
PER 1270-DPW-99A
PER 1270-DPD-99A
PER 513-DP8
Diesel
Gas
Water
Waste (No retainer on cap)
Cap only (Waste)
Cap only (Gas)
Cap only (Water)
Cap only (Diesel)
Spare o-ring, 2/pkg
Perko Combination Fill and Tank Vents
Plastic, ip top ll incorporates an integral tank
vent with ame arrester. Fuel splash back returns
down the ll neck instead of overboard when
lling. With the lid closed continuous venting
is provided while effectively preventing water
intrusion. All plastic construction eliminates the
need for installation of ground wire.
PER 1318-DPG-BLK
PER 1319-DPG-BLK
PER 1319-DPW-BLK
PER 1319-DPG-WHT
Black gas 35° angled neck
Black gas
Black water
White gas
Accessories:
Fuel system locking insert for 1-1/2” vented lls
• Black plastic with zinc alloy lock cylinder
• Dual purpose key opens ll cap & locking insert
• Fits most Perko vented lls
PER 525-DP0-BLK
Perko Fuel Fill Locking Insert
Just open the ll cap, insert lock cylinder,
remove the key and replace the cap. Comes with
2 dual purpose lock/deck keys.
• Fits most Perko vented lls
PER 525-DP0-BLK
247
Deck Fills
Perko Combination
Gas Fill & Tank Vents
Sea-Dog Stamped S/S Deck Fill
Angled head deck ll combined with the tank
vent. Vent ame arrester and anti-surge valve.
Requires deck plate key and #8 fasteners. Use
with approved 1-1/2" fuel ll and 5/8" vent hose.
Chrome cap & plastic base
Black plastic cap & base
White plastic cap & base
Parts:
PER 540-DPG-99A
PER 525-DP0-BLK
Spare chrome cap with chain
Lock
Whitecap Push-Up Deck Fills
316 Stainless steel construction deck lls have
a unique pop-up key for cap removal. Colour
coded and imprinted to international standards.
For 1-1/2" hose with a 3" ange. Uses #10
screws.
WHI 6993C
WHI 6994C
WHI 6995C
WHI 6996C
Gas
Diesel
Water
Waste
Sea-Dog Gas Deck Fill
•
•
•
•
Gas deck ll with splash guard
Die cast chrome plated zinc
Fitting for 1-1/2" hose
Use #10 FH fasteners
EXTERIOR HARDWARE
PER 540-DPG-CHR
PER 542-DPG-BLK
PER 542-DPG-WHT
• Female threads to accept 1-1/2" pipe
thread ttings
• Flange diameter is 3-1/4"
• Use #8 FH fastener
SED 351261
Diesel
SED 351264-1
Waste
SED 351750-1
Parts:
SED 351755-1
Replacement cap
Sea-Dog Stainless Steel Hose
Deck Fills
• Comes with cap, safety chain
• Investment cast 316
• Use #10 fasteners
Hose Barb
Marking
Flange Dia.
SED 351320-1
1-1/2"
Gas
3"
Whitecap
Push-Up Replacement Cap
SED 351321-1
1-1/2"
Diesel
3"
SED 351322-1
1-1/2"
Water
3"
Stainless steel replacement cap with
'hiding push key' ts most standard
1-1/2" deck lls.
SED 351323-1
WHI 6961C
1-1/2"
Waste
3"
SED 351330
2"
Gas
3-1/2"
SED 351331
2"
Diesel
3-1/2"
Parts:
Attwood "Indy" Stainless Steel Gas Fill
Contemporary high-performance style deck ll
designed especially for high-performance-oriented
cruisers and run-a-bouts. Low-pro le, highlypolished cast 316 stainless steel. Spring-loaded
hinged cap.
• Hose size: 1-1/2"
• 3-1/4" x 4-1/2" x 1" H above deck
• Installation hole size: 1-7/8"
ATT 66344-1
Marelon Deck Fills
Molded in high-strength non-corrosive Marelon® for lifetime
durability. Deck lls are available in three colour-coded models.
Each clearly marked for use with either water, fuel or waste. Easyopen cap is tted with nylon retaining cord and rubber O-ring to
ensure a safe and ef cient seal. Hose: 1-1/2"
• Flange: 4", Cutout: 2-1/8", Length: 3"
MPS 907002
MPS 907003
MPS 907004
Part #
Fuel
Water
Waste
SED 351390-1
SED 351392-1
SED 351399-1
Replacement cap (1-1/2")
Replacement cap (2")
Deck plate key
Sea-Dog Locking Stainless Steel Deck Fills
•
•
•
•
•
Includes 2 keys
1-1/2" hose
#10 FH fasteners
1-1/4" cap threads
SED 351320L-1
SED 351321L-1
Gas
Diesel
Wren Stainless Steel Deck Fills
These llers have no threading thus
eliminating galling from dirt, sand etc.
They also have a key lock for security. 316
Stainless steel.
• Bayonet twist action with ‘pop up’ cap
• Double sealed with water drain
• Flush tting into deck with no visible xing
when closed
WRE D11621 2"
WRE WS11621 2"
WRE W11621 2"
2" Diesel
2" Waste
2" Water
248
Deck Fills
Sea-Dog Cast Stainless Steel
Deck Fills With Keyless Caps
Sea-Dog Fibreglass Nylon Deck Fills
These investment cast 316 stainless deck
lls have a special cap with a built in key for
quick and easy removal. The hinged key can
be locked in the upright position to open or
close the ll and then recess into the cap for
a ush surface. Caps are molded in special
colours to prevent accidental, dangerous and costly
tank contamination. For use with 1-1/2" I.D. hose.
Part #
Marking
Cap
EXTERIOR HARDWARE
SED 351310-1
Gas
Red
SED 351311-1
Diesel
Green
SED 351312-1
Water
Blue
SED 351313-1
Waste
Black
Red gas cap only
Green diesel cap only
Blue water cap only
Black waste cap only
Cap
Body
SED 357030-1
Gas
Red
Black
SED 357031-1
Diesel
Green
Black
SED 357033-1
Water
Blue
Black
SED 357034-1
Waste
Black
Black
SED 357020-1
Gas
Red
White
SED 357023-1
Water
Blue
White
SED 357024-1
Waste
Black
White
Replacement Caps:
SED 357090-1
SED 357091-1
SED 357093-1
SED 357094-1
Red gas cap only
Green diesel cap only
Blue water cap only
Black waste cap only
Marking
Cap
N/A
Body Only Black
SED 357000-1
SED 357010-1
Gas
Red
SED 357011-1
Diesel
Green
SED 357013-1
Water
Blue
SED 357014-1
Waste
Black
Cap & chain for gas unit
Cap & chain for diesel unit
Cap & chain for water unit
Cap & chain for waste unit
Buck Algonquin Pipe Deck Plates
These breglass lled nylon deck
lls have a special cap with a
built in key for quick and easy
cap removal. The hinged key can
be locked in the upright position
to open or close the ll and then
recessed into the cap for a ush
surface. Caps are molded in
special colours to prevent accidental, dangerous and costly tank
contamination. For use with 1-1/2" I.D. hose.
Marking
Part #
SED 357015-1
SED 357016-1
SED 357017-1
SED 357018-1
Sea-Dog Keyless Cap Deck Fills
Part #
For use with 1-1/2" I.D. hose
Flange diameter: 3-5/16"
Comes with safety chain
Use #10 fasteners
Replacement Caps:
Replacement Caps:
SED 357090-1
SED 357091-1
SED 357093-1
SED 357094-1
•
•
•
•
Furnished with beaded chain, cap and spanner key.
Cast bronze with machined brass nish. 1-1/2" and
2" sizes come complete with O-ring seal.
Part #
BUC ORING-125
Finish
Marked
O-Ring ts all 125 deck plates
Pipe size 1-1/2". Flange diameter 3-3/4"
BUC PDP 150MF-PLN
Machine
BUC PDP 150MF-GAS
Machine
Gas
BUC PDP 150MF-FUEL
Machine
Fuel
BUC PDP 150MF-WTR
Machine
Water
BUC PDP 150MF-WSTE
Machine
Waste
BUC PDP 150MF-DIE
Machine
Diesel
BUC ORING-150
Plain
Pipe size 2". Flange diameter 4-5/8"
BUC PDP 200MF-PLN
Machine
Plain
BUC PDP 200MF-GAS
Machine
Gas
BUC PDP 200MF-FUEL
Machine
Fuel
BUC PDP 200MF-WTR
Machine
Water
BUC PDP 200MF-WSTE
Machine
Waste
BUC PDP 200MF-DIE
Machine
Diesel
BUC ORING-200
Note: Spare Caps Only
BUC PDPC-125-MF
BUC PDPC-150-MF
BUC PDPC-200-MF
1-1/4" machine
1-1/2" machine
2" machine
249
Deck Plates / Deck Plate Keys
Perko Deck Plate Key
Buck Algonquin Stainless Steel
Pipe Deck Plates
Investment cast 316 stainless steel, polished
to a mirror nish. Furnished with bead chain,
cap and spanner key. With O-ring seal.
Uses #10 FH fasteners
Part #
Lug
Centres
Length
Plate
Size
Finish
Marked
Flange
PER 1248-006-DP
5/8"
3-3/8"
1"
Zinc
1-1/2"
Gas
3-3/4"
PER 1248-7-8-DP
1-1/8"
3-3/8"
1-1/2"
Plastic
BUC PDPS 150-WTR
1-1/2"
Water
3-3/4"
PER 1248-009-DP
1-11/16"
4-3/8"
2"
Zinc
BUC PDPS 150-DIE
1-1/2"
Diesel
3-3/4"
BUC PDPS 150-PLN
1-1/2"
Plain
3-3/4"
BUC PDPS 150-WSTE
Fits Perko 1-1/4" and 1-1/2" deck plates and
many other “slot” type opening deck plates.
Rugged black plastic.
Part #
1-1/2"
Waste
3-3/4"
BUC PDPS 200-DIE
2"
Diesel
4-5/8"
BUC PDPS 200-PLN
2"
Plain
4-5/8"
BUC PDPS 200-GAS
2"
Gas
4-5/8"
Note: Spare caps only
BUC PDPS-150C-S/S
BUC PDPS-200C-S/S
1-1/2" stainless steel
2" stainless steel
Attwood Stainless Steel Replacement Cap
With threads for 1-1/4" straight pipe deck
lls. Fits Attwood #'s 66406, 66407, 66408
and 66408C1.
ATT 66074-3
Replacement cap
and chain
Perko Safety Cord
Prevents loss of deck plate caps.
24" mono lament.
PER 537-DP
Davis Deck Plate Key
This handy, pocket size, deck plate key is made of
hardened 301 marine grade stainless steel. Positive
t eliminates damage to plastic or metal deck plates.
Fits hole spacing: 1.06"(27 mm), 1.19"(30 mm), and
1.44"(37mm). Fits slots: 1.125"(28 mm) and larger.
DIN 381
Sea-Dog Universal Deck Plate Key
Stamped 304 stainless steel. Fits deck plates with
holes or slots. Easily opens shackles, bottles and
slotted fasteners.
SED 335690-1
PER 1247-DP-BLK
Sea-Dog Deck Fill Key
Made from injection molded nylon. Distance
between teeth 1-3/16".
SED 357399-1
Black
Sea-Dog Adjustable Deck Plate Key
Opens to a maximum of 6" and comes with
two sizes of stainless steel pins, 3/16" and
5/16" allowing it to t most plates or caps.
If desired, you can add a lanyard. Made
from satin nished bronze.
SED 335680-1
Chrome plated zinc. Heavy duty - will
t up to 8" diameter plates.
• Overall length 8-1/2"
PER 826-DP-CHR
Sea-Dog Deck Plate Key
Made from formed 304 stainless, 7"
overall. Fits all cast stainless steel
Sea-Dog deck ll caps: 351320 - 351331
and 351350 - 351353 and deck plates:
335633 - 335646. Plus ts other brands of
deck plates and deck lls.
SED 335699-1
SED 335699
Carded
Bulk
EXTERIOR HARDWARE
Pipe
BUC PDPS 150-GAS
251
Rail Fittings
Sea-Dog 7/8" Base Rail Fittings (Chrome Plated Die Cast Zinc)
Description
Tube OD
Base
Fastener
SED 286030-1
Part #
30° Round base
7/8”
2-5/8"
#10 FH
SED 286060-1
60° Round base
7/8”
2-5/8"
#10 FH
SED 286090-1
90° Round base
7/8”
2-5/8"
#10 FH
SED 286130-1
30° Rectangular base
7/8”
1-5/8" x 2-3/4"
#10 FH
SED 286160-1
7/8”
1-5/8" x 2-3/4"
#10 FH
SED 286190-1
7/8”
1-5/8" x 2-3/4"
#10 FH
286090
286030
286060
286130
Includes 1/4-28 x 3/16” set screws
Sea-Dog 7/8" Hand Rail Fittings (Chrome Plated Die Cast Zinc)
Part #
Description
Tube OD
Rail Height
Fastener
SED 286560-1
60° Center
7/8”
2-1/8"
#10 FH
SED 286565-1
60° End-left hand
7/8”
2-1/8"
#10 FH
SED 286566-1
60° End-right hand
7/8”
2-1/8
#10 FH
SED 286955-1
5-1/2” Blend base
7/8”
-
#10 FH
SED 286290-1
Bullet end
7/8”
-
#10 FH
286560
286565
286566
286955
286290
Sea-Dog 7/8" Rail Tee Fittings (Chrome Plated Die Cast Zinc)
Description
Tube OD
SED 296090-1
Part #
90° Tee
7/8”
SED 296095-1
90° Elbow
7/8”
SED 296160-1
60° Tee-left hand
7/8”
SED 296260-1
60° Tee-right hand
7/8”
SED 296510-1
110° Bow form
7/8”
296095
296510
296090
296160
296260
Sea-Dog Round Base Rail Fittings (Investment Cast 316 Stainless Steel)
Part #
Description
Tube OD
Base OD
SED 280300-1
30° Round base
7/8”
2-5/8"
#10 FH
SED 280301-1
30° Round base
1”
2-3/4"
1/4“ FH
SED 280450-1
45° Round base
7/8”
2-5/8"
#10 FH
SED 280451-1
45° Round base
1”
2-3/4"
1/4“ FH
SED 280600
60° Round base
7/8”
2-5/8"
#10 FH
SED 280600-1
60° Round base
7/8”
2-5/8"
#10 FH
SED 280601-1
60° Round base
1”
2-3/4"
1/4“ FH
SED 280900-1
90° Round base
7/8”
2-5/8"
#10 FH
SED 280901-1
90° Round base
1”
2-3/4"
1/4“ FH
Fastener
280300
280600
280450
280900
EXTERIOR HARDWARE
286190
286160
252
Rail Fittings
Sea-Dog Rectangular Base Rail Fittings (Investment Cast 316 Stainless Steel)
Part #
EXTERIOR HARDWARE
Description
Tube OD
Base
Fastener
SED 281300-1
7/8”
1-3/4” x 2-5/8”
#10 FH
SED 281301-1
1”
1-7/8” x 3-3/16”
1/4" FH
SED 281450-1
7/8”
1-11/16” x 3”
#10 FH
SED 281451-1
1”
1-7/16” x 3-1/4”
1/4" FH
SED 281600-1
7/8”
1-3/4” x 3-1/16”
#10 FH
SED 281601-1
1”
1-7/8” x 3-1/4”
1/4" FH
SED 281900
7/8”
1-11/16” x 3”
#10 FH
SED 281900-1
7/8”
1-11/16” x 3”
#10 FH
SED 281901-1
1”
1-7/8” x 3-3/16”
1/4" FH
SED 281931-1
90° Base
1”
2-1/16” x 3”
1/4" FH
SED 281936-1
90° Base
1”
3-11/16” x 3-3/8”
1/4" FH
281300
281450
281600
281900
281936
Suf x (-1) indicates display package.
Sea-Dog Hand Rail Fittings (Investment Cast 316 Stainless Steel)
Part #
Description
Tube OD
Rail Height
Fastener
SED 285060-1
60° Center
7/8”
1-13/16”
#10 FH
SED 285061-1
60° Center
1”
2-3/16”
1/4“ FH
SED 285065-1
60° End left-hand
7/8"
1-13/16"
#10 FH
SED 285120-1
120° End
7/8”
1-13/16”
#10 FH
SED 285121-1
120° End
1”
2-3/16”
1/4“ FH
SED 285160
60° End
7/8”
1-13/16”
#10 FH
SED 285160-1
60° End
7/8”
1-13/16”
#10 FH
SED 285161-1
60° End
1”
2-3/16”
1/4“ FH
SED 285165-1
60° End left-hand
7/8”
1-13/16”
#10 FH
SED 285166-1
60° End right-hand
7/8”
1-13/16”
#10 FH
SED 288290-1
Bullet end
7/8”
N/A
N/A
SED 289900-1
90° End-bottom mounted
7/8”
1-7/8”
1/4“ Bolt
SED 289901-1
90° End-bottom mounted
1”
2”
1/4“ Bolt
SED 289905-1
60° Center-bottom mounted
7/8”
1-7/8”
1/4“ Bolt
285060
285120
288290
289905
285160
289900
Sea-Dog Stanchion Fittings (Investment Cast 316 Stainless Steel)
Part #
Description
Tube OD
Eye Dia.
SED 270500-1
Stanchion eye
1”
1/2”
SED 270510-1
Stanchion cap
7/8”
5/16”
SED 270511-1
Stanchion cap
1”
5/16”
270500
270510
253
Rail Fittings
Sea-Dog Rail Tee Fittings (Investment Cast 316 Stainless Steel)
Description
Tube OD
SED 290600-1
Part #
60° Universal tee
7/8”
SED 290601-1
60° Universal tee
1”
SED 290900-1
90° Tee
7/8”
90° Tee
1”
SED 291600-1
60° Tee left-hand
7/8”
SED 291601-1
60° Tee left-hand
1”
SED 292600-1
60° Tee right-hand
7/8”
SED 292601-1
60° Tee right-hand
1”
SED 293100-1
3-Way corner
7/8”
SED 293101-1
3-Way corner
1”
SED 293131-1
4-Way corner
1”
290900
290600
EXTERIOR HARDWARE
SED 290901-1
293131
293100
Sea-Dog Elbow Fittings (Investment Cast 316 Stainless Steel)
Part #
Description
Tube OD
Degree
SED 293190-1
90° Cable anchor
7/8”
N/A
SED 293191-1
90° Cable anchor
1”
N/A
SED 295090-1
90° Elbow
7/8”
N/A
SED 295091-1
90° Elbow
1”
N/A
SED 295095-1
Elbow & anchor eye
7/8”
N/A
SED 295096-1
Elbow & anchor eye
1”
N/A
SED 295110-1
Bow form
7/8”
110°
SED 295111-1
Bow form
1”
110°
SED 295125-1
Bow form
7/8”
125°
293190
295090
295110
Sea-Dog Stanchions & End Fittings (Investment Cast 316 Stainless Steel)
Part #
Description
Tube OD
Rail Height
Fastener
SED 289155-1
5-1/2° Rail (end in)
N/A
7/8”
#10 FH
SED 289165-1
16-1/2° Rail (end out)
N/A
7/8”
#10 FH
289155
Sea-Dog Handrail/Lifeline Fittings (Investment Cast 316 Stainless Steel)
Part #
Description
Tube OD
Base
Pin Dia.
Fastener
SED 270530-1
Stanchion sleeve w/ eye
7/8”
N/A
3/8”
N/A
SED 270531-1
Stanchion sleeve w/ eye
1”
N/A
3/8”
N/A
SED 270540-1
1”
2-13/16” x 3-9/16”
N/A
1/4" FH
SED 270550-1
Lifeline base
N/A
2-7/16” x 1-1/2”
3/8”
#10 FH
270540
270550
270530
254
Rail Fittings / Tubing / Hand Rails
Transat Stainless Rail Fitting
Rectangle Base - Bulk
TMS Q30035
TMS Q30036
TMS Q30053
TMS Q30054
90° 7/8”
90° 1”
60° 7/8”
60° 1”
Transat Stainless Rail Fitting
Round Base - Bulk
EXTERIOR HARDWARE
TMS Q30038
TMS Q30039
TMS Q30047
TMS Q30048
90° 7/8”
90° 1”
60° 7/8”
60° 1”
Transat Stainless Stanchion Eye - Bulk
TMS Q30017
TMS Q30018
7/8” w/ eye
1” w/ eye
Transat Stainless 3-Way Corner Fitting - Bulk
TMS Q30020
TMS Q30021
7/8”
1”
Transat Stainless Stanchion Cap - Bulk
TMS Q30022
TMS Q30023
7/8”
1”
Perko Grab Rail Posts
Chrome plated bronze. For 1" O.D. tubing.
• Height: 3-3/8"
• Base diameter: 2-1/2"
PER 380-000-CHR End post
PER 380-A00-CHR Centre post
Stainless Steel Rail Tubing
•
•
•
•
•
600 grit buffed and polished nish
Standard length 20 feet
Type 304 S/S
Available in two sizes
Sold by the foot
WES 7/8"S/S
WES 1"S/S
7/8" OD x .049 wall thickness
1" OD x .065 wall thickness
TACO Aluminum Tubing
Bright anodized nish, .058" wall.
TAC A233458BLY20
TAC A237858BLY12
3/4" OD, 20' length
7/8" OD, 12' length
Sea-Dog
Rail Mount Hose and Cable Bracket
This stainless steel bracket is designed to hold water
hoses, shore power cords, phone lines, etc. The
stainless steel retaining clip also prevents dock lines
and rigging from accidentally getting caught in the
bracket.
• 2" W x 5-3/4" H x 1-1/8" D
SED 327115-1
Transat Stainless 60° Rail Tees - Bulk
TMS Q30057
TMS Q30058
60° 7/8”
60° 1”
Transat Stainless 90° Rail Tees - Bulk
TMS Q30059
TMS Q30060
7/8”
1”
Sea-Dog Rail Mount Brackets
Injection molded nylon and stainless steel.
Designed to clamp easily to
7/8" - 1" tubing. Fasteners are included.
SED 327100-1
SED 327101-1
SED 327102-1
1 pr. brackets
1 pr. brackets, and 2 oval plates
1 pr. brackets, and 2 square plates
Attwood Flexible Grab Handles
Transat Stainless 90° Elbows - Bulk
TMS Q30063
TMS Q30064
7/8”
1”
Sea-Dog Stainless Hinged Rail
Tee Fittings
Hinged feature allows installation without
disassembling existing Bimini setup.
Also reduces possibility of scratching tubing during
installation since it does not need to slide into place.
SED 290603-1
SED 290604-1
SED 290903-1
SED 290904-1
60° Hinged universal tee 7/8"
60° Hinged universal tee 1"
90° Hinged tee 7/8"
90° Hinged tee 1"
Constructed of soft black polypropylene webbing over a semi rigid
core. U.V. stable and mildew resistant.
• 7-1/2' grip opening
• Uses 4 x #12 screws
ATT 2061-5
AFI Stainless Steel Handrails
Quality pre-made stainless steel handrails make a great addition to
any boat. They provide an extra margin of safety and convenience.
• Using 1/4"fasteners
• Display packaged
AFI 74212
AFI 74218
AFI 74224
12"
18"
24"
255
Hand Rails / Boat Top Fittings
TACO Slide Track
Sea-Dog Hand Rails
•
•
•
•
• 14 foot lengths
Stud mount
3/4" OD tube
Rail height: 2"
SED 254112-1
SED 254118-1
SED 254124-1
TAC A520037BLY14
12”
18”
24”
Sea-Dog Bimini Strap
Nylon/stainless/chrome plated brass.
• 1" x 8', black
Top Slide Kits - .85 Track
Enables easy storage of bimini tops. Each kit includes 2 x Tracks,
1 x starboard side deck hinge slide, 1 x port side deck hinge slide
and 4 x end cap covers.
18" - Black
18" - White
36" - Black
36" - White
Injection molded black nylon bracket mount jaw slide.
Pair
SED 273565-1
Injection molded black nylon slide bracket.
Star brite Clear Plastic Window Saver
Pair
SED 273665-1
• Simple and easy to install
• Stops sun heated rails from burning plastic
windows
STA 88578
STA 88510
Sea-Dog Canvas Top Fittings
EXTERIOR HARDWARE
SED 298318-1
SED 298418-1
SED 298336-1
SED 298436-1
Pair
SED 298172-1
Sea-Dog Top Slide Kits
7/8"
1"
Head screw.
Pair
SED 273568
Sea-Dog Injection Molded Rail Top Fittings
Description
Colour
Tube OD
Pin
Qty
SED 273100-1
Part #
Top cap
Black
7/8”
1/4"
Pair
SED 273101-1
Top cap
White
7/8”
1/4"
Pair
SED 273110-1
Top cap
Black
3/4”
1/4"
Pair
SED 273111-1
Top cap
White
3/4”
1/4"
Pair
SED 273160-1
Jaw slide
Black
7/8”
3/16"
Pair
SED 273161-1
Jaw slide
White
7/8”
3/16"
Pair
SED 273162-1
Hinged top slide
Black
7/8”
1/4"
Each
SED 273165-1
Jaw slide
Black
3/4"
3/16"
Pair
SED 273166-1
Jaw slide
White
3/4"
3/16"
Pair
SED 273175-1
Top insert
Black
3/4"
1/4"
Pair
SED 273176-1
Top insert
White
3/4"
1/4"
Pair
SED 273180-1
Top insert
Black
7/8"
1/4"
Pair
SED 273181-1
Top insert
White
7/8"
1/4"
Pair
273100
273110
273160
273175
273180
273162
Sea-Dog Injection Molded Track Fittings
Part #
Description
Colour
Width
Length
Qty
Fastener
SED 273213-1
.85 Track end cap stop
Black
7/8”
1-1/4"
Pair
#8 FH
SED 273220-1
.85 Track slides
Black
11/16”
2-3/8"
Pair
-
273220
273213
256
Boat Top Fittings
Sea-Dog Injection Molded Hinge Fittings, 3/16" Pin
• Sold in pairs
Part #
EXTERIOR HARDWARE
Description
Colour
Width
Length
SED 273200-1
Large deck hinge
Black
13/16”
2-7/16"
SED 273201-1
Large deck hinge
White
13/16”
2-7/16"
SED 273205-1
Small deck hinge
Black
13/16”
2-3/8”
SED 273206-1
Small deck hinge
White
13/16”
2-3/8”
SED 273230-1
Large deck hinge/angled
Black
7/8”
2-7/16"
SED 273231-1
Large deck hinge/angled
White
7/8”
2-7/16"
SED 273240-1
Concave deck hinge
Black
13/16”
2-7/16"
SED 273286-1
Deck hinge slide Stbd & Prt
White
7/8"
2-7/16"
273200
273205
273240
273230
273286
Use #10 FH screws
Sea-Dog Injection Molded Canvas Top Fittings
• Sold in pairs
Part #
Description
Colour
Tube OD*
Hole Space
Fastener
90° Inside eye end
Black
3/4”
-
-
SED 273351-1
90° Inside eye end
White
3/4"
-
-
SED 273369-1
90° Inside eye bracket
Black
N/A
15/16"
#8 FH
SED 273370-1
90° Inside eye bracket
White
N/A
15/16”
#8 FH
SED 273350-1
273351
273369
Sea-Dog Injection Molded Hinge Fittings
• Sold in pairs
Part #
Description
Colour
Width
Length
Deck hinge
Black
7/8”
2-7/16"
SED 273251-1
Deck hinge
White
7/8”
2-7/16"
SED 273260-1
.85 Slide mount
Black
7/8”
2-1/4”
SED 273261-1
.85 Slide mount
White
7/8”
2-1/4”
SED 273265-1
1.050 Slide mount
Black
1”
2-1/4”
SED 273266-1
1.050 Slide mount
White
1”
2-1/4”
SED 273295-1
.85 Track slide lock
Black
11/16”
13/16”
SED 273250-1
1/4" Pin
Sea-Dog Injection Molded Head Screws & Connectors
• Sold in pairs
Part #
Description
Colour
Width
Length
SED 273298-1
Head screw 1/4-20 x 7/8”
Black
7/8”
1-3/8”
SED 273299-1
White
7/8”
1-3/8”
SED 273308-1
Black
13/16”
15/16”
SED 273309-1
White
13/16”
15/16”
Tube connector 7/8”
White
7/8”
2-1/4”
SED 273301
273261
273251
273265
273295
257
Boat Top Fittings
Sea-Dog Investment Cast 316 Stainless Steel Top Fittings
270100
Part #
Description
Tube OD
Pin
SED 270100
Top cap
7/8"
1/4"
SED 270100-1
Top cap
7/8"
1/4"
SED 270101-1
Top cap
1”
1/4”
SED 270102
Top cap
1-1/4”
1/4”
SED 270111-1
Top cap heavy duty
1”
5/16”
SED 270160-1
Top slide with bolt
7/8”
1/4”
SED 270161-1
Top slide with bolt
1”
1/4”
SED 270162
Top slide with bolt
1-1/4”
1/4”
SED 270165-1
Top slide with bolt
3/4"
1/4”
SED 270166-1
Hinged top slide with bolt
7/8”
1/4”
SED 270175-1
Top insert
3/4"
1/4”
SED 270180-1
Top insert
7/8”
1/4”
270101
270111
270160
EXTERIOR HARDWARE
270162
270175
1/4-28 x 3/16" set screws (Set of 10)
SED 299999-1
Sea-Dog Investment Cast 316 Stainless Steel Hinge Fittings
270200
270205
270210
270230
270240
270245
270250
Part #
Description
Base
Pin
Fastener
SED 270200
90° Deck hinge
3/4" x 2-1/4”
1/4”
#10 FH
SED 270200-1
90° Deck hinge
3/4" x 2-1/4”
1/4”
#10 FH
SED 270205-1
90° Deck hinge - heavy duty
1” x 2-1/16”
5/16”
1/4" FH
SED 270210-1
90° Deck hinge - removable pin
3/4" x 2-1/4”
1/4”
#10 FH
SED 270230-1
Angle back deck hinge
3/4" x 2-1/4”
1/4”
#10 FH
SED 270240-1
Concave base deck hinge
3/4" x 2-1/4”
1/4”
#10 FH
SED 270245-1
Concave base deck hinge - removable pin
3/4" x 2-1/4”
1/4”
#10 FH
SED 270250-1
Side mount deck hinge
7/8” x 2”
1/4”
#10 FH
SED 270255-1
Side mount deck hinge - heavy duty
1-7/8” x 2-13/16”
5/16”
1/4" FH
SED 270260-1
Adjustable angle deck hinge - heavy duty
1” x 2-3/4”
N/A
#10 FH
Parts:
SED OP27002-1
SED 299980-1
SED 299981-1
SED 299999-1
S/S replacement hinge pin
Lanyard with stepped release pin
Lanyard with straight release pin
1/4-28 x 3/16" set screws (Set of 10)
270255
270260
258
Ladders
AFI Poly Platform With Telescoping Ladder
EXTERIOR HARDWARE
• All stainless steel telescoping
two-step ladder
• White poly swim platform for boats
with O/B motors
• Platform kits are easy to assemble
using pre-marked and pre-drilled
holes
• Molded platform manufactured
of UV resistant, high-strength
polypropylene
• Anti-skid ribs and textured surface molded onto platform
• All tubing, brackets and hardware are stainless steel
• Telescoping ladder easily stores on top of platform
• Platform: 18" W (back), 17" W (front), x 15" D x ¾" thick
AFI 67904
Garelick Fold-Down Ladder
Folds down into water for easy boarding.
Mounts on 6-1/2" x 12" area. Unique
attaching brackets enable ladder to t most
angled or curved transoms. Improved
self-locking, folding hinge. Tube rail can
be cut and moved for proper t. Featuring
durable 1" diameter aluminum tubing. All
aluminum parts are anodized. Non-slip
comfortable modi ed oval-shaped anodized
aluminum steps. Strap locks ladder in up position. All
fasteners are stainless steel.
GAR 18017
GAR 18018
2-Step, 15" fold-down
3-Step, 25" fold-down
Windline Underdeck Ladders
AFI Swim Platform Brackets
Stainless steel. Sold individually.
AFI 60995
AFI 60996
9"H x 17"L x 1-1/2"W
14"H x 21-1/2"L x 1-1/2"W
Windline Under Platform
Telescoping Slide Mount Ladder
Stainless steel steps slide under the platform for
stowage. Requires a minimal amount of depth, fore
and aft. Includes quick lock nylon strap.
• Three step
• Length deployed: 35.0"
• Length stowed: 15.0"
• Height stowed: 2.5"
• Overall width: 12.5"
WIN SM-3X
Windline Telescoping Drop Ladder
• Mounts and stows on top of
the swim platform. 3 stainless
steel steps with a comfortable
plastic pads. Thick-wall
stainless tubing. Telescoping steps drop quickly
and easily into the water.
• Length deployed: 34"
• Width: 12.5"
WIN TDL-3X
These underdeck ladders come
complete with bracket mounts
and quick lock straps. Electro-polished stainless steel
with plastic treads. Slides under platform for compact storage.
Part #
Style
Open
Stowed
WIN UP-2X
2 step
26"
17"
WIN UP-3X
3 step
37"
18"
Garelick Swim Platform/Ladder
• For use on outboard transoms
• One stainless wrap around rail and one
underside
• Durable, platform is easy to clean
• Stainless steel hardware
• 13" L x 14-1/2" W x 12.5" D
GAR 19535
• For use on outboard transoms
• One stainless wrap around rail and one
support rail
• Ladder slides up and under platform for
storage
• 18" W x 15-1/2" D x 22-3/4" L
GAR 19536
Sea-Dog Telescoping Ladders
•
•
•
•
Stainless steel construction
Gudgeon mount
Comes with securing strap
Width: 8-3/4"
SED 328202
SED 328203
2 Step, 23-3/8"
3 Step, 34-3/8"
• For use on inboard/outboard transoms
• Two stainless wrap around rails (no lower
leg)
• 13" L x 14-1/2" W x 12-1/2" H
GAR 19545
Ladders
Garelick Deluxe Series Ladders
Davis Instruments Swim Stirrup
Feature comfortable and sturdy white traction
molded steps. Durable 1" diameter aluminum
tubing. Thick vinyl covered hooks will not mark
hull's nish. All aluminum adjustable standoffs
with cushioned tips for correct t. Hooks
and standoffs fold at for compact storage.
Recommended for persons up to 175 pounds.
HxW
Hook
3
36" x 15"
11"
GAR 05037
3
36" x 15"
7"
DIN 1466
GAR 05041
4
48" x 15"
11"
Part #
Garelick Shur-Loc Ladder Catches
Garelick Latch Type Ladder
Designed for small cruisers, Run-a-bouts or sail boats,
with unusual gunwales where a hook type ladder is
not practical. Attaches easily with 1 pair of Model
76000 Shur-Loc catches provided. Durable 1" diameter
aluminum tubing with comfortable and sturdy white
traction molded plastic steps. All aluminum adjustable
standoffs with cushioned tips for correct t.
• Length: 56" (including 13" over rail hook)
GAR 10049
Windline Removable Pontoon Ladder
Integrated 11" swim handles, plastic steps for
comfort and it folds for compact storage. Four steps.
• Length deployed: 46.5"
• Height stowed:5.0"
• Overall width: 16"
WIN TDL-4E
Contour design hugs hull for side boarding and
attaches to oor board with a 3/8" line and swivel
snap. Vinyl sleeves will not mar hull material.
• 33" x 13.5"
3-step ladder
Sea-Dog Emergency Folding Ladders
These Portable Emergency Boarding
Ladders are made of molded-in,
high-visibility orange polycarbonate
with nylon rope supporting the frame.
They secure quickly to cleats, railings,
stanchions and halyards and will support
up to 300 pounds. Steps are spaced at 1' 6" and are 113/4" wide.
SED 582502-1
SED 582503-1
GAR 76000
Whitecap Boarding Ladder
• Made of 304 stainless steel
• Push button lock feature:
Separates handle for storage
Allows for 2 boarding positions
• Tube diameter 1-1/2"
• Overall height 45-1/2"
• Handle width: 12"
• Fits any standard rod holder
WHI S-6242
Garelick Ladder Standoffs
Garelick In atable Boat Ladder
GAR 13003
Designed to mount on hull or deck for attaching
Garelick boarding ladders. Allows for either permanent
or temporary mounting. Made of sturdy stainless steel
with unique self locking design.
• 2-1/2" x 1-3/4"
4-steps, 2'5" long
3-steps, 1'6" long
Boarding ladder standoffs, as used on traction
molded plastic and traction grooved oak style
steps. Includes poly tips, screws and nuts. Can
be cut for exact length desired.
Sold in pairs.
• Length: 4-1/2"
GAR 99000
► Also See:
Standoffs
Dock Ladders pg 856
EXTERIOR HARDWARE
Steps
GAR 05031
The Swim Stirrup® has been carefully
engineered to provide safe, easy access to
small boats for swimmers or water skiers.
Durable, reliable design attaches to
gunwales, transoms, or open bows. Easy
to install, easy to use and it oats.
• Perfect for rowboats, ski boats,
dinghies, sail boats
• Adjustable length to t your boat
• Complete hardware and instructions included
259
260
Ladders
Garelick Integrated Transom Ladders
Garelick Folding Gull Wing Step Ladders
Folded
EXTERIOR HARDWARE
Step
Stowed
When stowed this ladder ts fully within the transom of the boat.
The only component visible during storage is the faceplate and
locking/release mechanism. Pull the release pin, slide the ladder
out of the storage tube and fold out the molded steps. Semiautomatic function with all steps folding out on common side at
once. All aluminum construction with plastic steps.
GAR 19902-34
GAR 19902-44
3-Step
4-Step
• Black reinforced nylon steps fold "parallel" in
unison and lock up
• Quick release mounting bracket with builtin angle adjustment and breakaway feature
included
• Centre vertical allows easy use with diving
gear
• Dual stainless steel centre rails
• Heavy duty- rated to 400 lbs boarding weight
Description
Stowed
Open
GAR 19853
Part #
3 steps
4" x 4" x 47"
44" x 15"
GAR 19854
4 steps
4" x 4" x 57"
57" x 15"
Paws Aboard Boarding Ladder
Garelick Sport/Diver Ladders
Angled design for stair-like ease of boarding
Centre vertical allows easy use with diving gear
Oval steps with nonskid surface
Quick release mounting bracket with lock for
easy storage
• Heavy duty - rated to 400 lbs. boarding weight
• Transom mounting bracket and ladder storage
brackets included
•
•
•
•
GAR 19803
GAR 19804
3 steps x 13", 38" length
4 steps x 13", 48" length
Garelick Sport/Diver Ladder Mounting Bracket
Use this additional bracket for multiple mounting locations on
boat. Mounted on 1" thick poly spacer with 100 angle and lock and
stainless steel face plate mounting bracket.
• 2.75" W x 3.62" H
• Mounting hole diameter: 5/16"
Great for any dog you want to take out in the water. It
provides an easy entrance/exit.
• Portable, lightweight and durable
• Easy to attach and remove from any boat ladder
• Reduces pain and strain for pets and owners
• Measures 16" x 64" and folds in half for easy storage
GAR 99180
PAW 5200
Garelick Sport/Diver Ladder Mounts
Garelick transom mounting extrusion shim. Extends
ladder further from the transom. Used with face plate
and 10 degree poly spacer included with ladder. Made of
stainless steel.
• 2.75" W x 3.62" H
GAR 99181
GAR 99184
2"
3"
261
Steps
Sea-Dog Deck Steps
Perko Step Plates
• Chrome plated zinc frame
• Black molded soft plastic pad
PER 1325-DP1-CHR
8-3/4" x 3-1/4", 2/pkg
• Chrome plated bronze frames
• Black molded plastic pads
PER 1043-DP1-CHR
8-3/4" x 3-1/4", each
PER 1043-DP2-CHR
11-1/2" x 5-3/4", each
For 1325-1/1043-1, 2/pkg
For 1043-2, 2/pkg
SED 328012-1
A
2-1/4"
C
Fastener
8-3/8"
7-11/16"
#8 FH
Replacement pad for 328012
SED 328017-1
SED 328013-1
B
3-3/8"
8-7/8"
8-3/16"
#8 FH
Sea-Dog Step Handles
Perko Step Plate
Chrome plated brass frame with soft
black plastic tread insert. 2/pkg
• 7-1/4" x 1-1/2"
PER 1015-DP-CHR
Perko Boarding Step
Cast bronze chrome plated.
• Step size: 6" x 4-1/4"
• Mount bracket size: 6" x 2"
• Uses 5/16" RH fasteners
PER 351-DP-CHR
Injection molded nylon, these step handles
can be used as a lift on small boat transoms
and since they are molded with a contoured
handle grip, the at, textured upper surface
also allows it to be used as a step.
• Use #10 RH fasteners
SED 227260-1
SED 227261-1
Black
White
Sea-Dog Folding Step
Perko Folding Step
Cast bronze, chrome plated construction. Stainless
steel spring holds step in open or closed position.
• Step size: 4-1/8" x 2-1/4"
• Base size: 4-1/4" x 1-3/4"
• Folded projection 1-3/8"
• Uses 5/16" RH fasteners
PER 344-DP-CHR
SED 328025-1
Sea-Dog Folding Step
Chrome plated cast brass.
SED 322620-1
Buck Algonquin Flying Bridge Ladder Steps
Made from anodized high tensile
aluminum. 11.5o ladder angle.
• Step size: 3" x 17"
BUC ST170088
BUC ST1700100
304 stainless steel. Unique design locks
steps in a rattle-free upright position when not in use. In the
down position, the 4-1/4" long step provides secure footing when
working on the mast. Use #10 PH.
7/8" tube O.D.
1" tube O.D.
Sea-Dog Aluminum Folding Mast Step
Made from polished #356 T-6 aluminum and nished with clear
anodizing. This step sticks out only 1-1/2" from the mast when not
in use.
• Step has 5" tread width
SED 328030-1
EXTERIOR HARDWARE
Spare pads:
PER 1050-DP1-BLK
PER 1050-DP2-BLK
Part #
262
Non-Slip
LifeSafe Traction Strips
3M Safety-Walk
Textured vinyl helps reduce the risk of slipping.
For safer footing everywhere… steps, ladders,
ramps, basement stairs, boats, trucks, trailers, farm
equipment, decks, skateboards, pools,
docks, diving boards and campers.
Light Duty
Fine textured, clear or white safety walk is
recommended for use on boat decks, around pools,
tubs and showers. Helps to coordinate a light nonskid
surface with any colour substrate.
• Length per roll: 60'
Part #
Size
Colour
Qty
LIF RE3902WH
1" x 12"
White
10
LIF RE3923GR
2" x 12"
Gray
6
LIF RE3924WH
2" x 12"
White
6
EXTERIOR HARDWARE
THR 59502-7743
THR 59503-7744
THR 59500-7745
1" White
2" White
4" White
THR 59498-7751
THR 59499-7752
THR 59496-7753
1" Clear
2" Clear
4" Clear
LifeSafe Traction Tape
Textured vinyl helps reduce the risk
of slipping.
LIF RE3954
LIF RE3955
2" x 15' Grey
2" x 15' White
LifeSafe Anti-Slip Grit Strips
Durable in wet or dry conditions. Pre-cut, selfadhesive strips are easy to use, simply peel and
stick. Improves footing on frames during cleaning,
maintenance and boat launching.
• 6 per pack
LIF RE3892BL
2" x 12" Black
LifeSafe Anti-Slip Grit Tapes
Durable in wet or dry conditions. Selfadhesive rolls are easy to use, simply
cut, peel and stick. Improves footing on
frames during cleaning, maintenance
and boat launching. Black in colour.
LIF RE36028
LIF RE36029
1" x 15'
2" x 15'
LifeSafe Traction Tape Display
Metal counter top display facilitates the
selling of product by the foot. Comes
complete with the following anti-slip
product in white:
1 Roll - 1” x 60 ft
1 Roll - 2” x 60 ft
1 Roll - 4” x 60 ft
LIF MR3960
Display
General Purpose
Safety-Walk consists of aluminum oxide abrasive
particles bonded by a tough, durable polymer to a
dimensionally stable plastic lm. Backing is coated
with a pressure sensitive adhesive covered by a
removable protective liner.
THR 19224
6" - Black
Medium Grade
Similar to the above product but made from a
high friction medium grade resilient, slip resistant
surface.
THR 19296
THR 19297
THR 19321
THR 59507-7740
THR 59504-7741
THR 19324
4" - Black
6" - Black
1" - Grey
2" - Grey
4" - Grey
6" - Grey
Heavy Duty
Surfacing has a diamond hard mineral surface
for extra traction. It is designed for use around
areas of heavy traf c.
• Black in colour
THR 59514-7731 1" x 60 ft
THR 59515-7732 2" x 60 ft
THR 59512-7733 4" x 60 ft
Flags / Flag Holders
Scythes Flags
Taylor Made Charlevoix Flag Clips
Canadian made and screen printed on standard weight nylon.
Individually packaged in heat sealed polyethylene bags.
SCY CDN-18x9"
SCY CDN-24x12"
SCY CDN-30x15"
SCY CDN-36x18"
SCY CDN-54x27"
SCY CDN-72x36"
SCY CDN-90x45"
This simple one piece clip attaches semipermanently to your pole and will keep your
ag securely in place at speeds up to 50 miles
per hour. Flags can be attached or removed in
seconds. The clips can also be removed, if desired.
SCY BC-18x9"
SCY BC-24x12"
SCY BC-36x18"
SCY BC-54x27"
SCY BC-72x36"
TAY 57926
TAY 57928
3/4" Pole
7/8" to 1" Poles
ITT Skipper Clips
ITT 34560-0000
SCY USA-18x9"
SCY USA-24x12"
SCY USA-36x18"
SCY USA-54x27"
SCY USA-72x36"
Whitecap Wood Flagpole
Paws Aboard Flags
Whitecap S/S Flagstaff
PAW 4100
PAW 4200
EXTERIOR HARDWARE
• Stainless steel utility fasteners
• Set of 4
Attention-grabbing boat ags include the Dog
Paw and Dog Bone ags.
• 19" x 11"
Paw print ag
Bone ag
• Includes (2) brass screws
• Varnished mahogany
• L: 18" x Dia: 3/4"
WHI S-5006
• Rail mount agstaff
• 304 S/S staff and black nylon
bracket
• Diameter 1/2" x Length 17"
• Bracket 7/8" and 1" tube
WHI S-5010
Taylor Made Boating Flags
Sewn nylon ags with brass
grommets are 12” x 18”.
TAY 240
TAY 1818
TAY 3718
TAY 9118
TAY 9218
TAY 9818
Jolly Roger pennant
Jolly Roger ag
Fishing ag
Cocktail ag
Beer ag
Margarita Time ag
Scythes Ingle eld Clips
All zinc die-cast clips sold as sets.
Du-Bro Flag Clips
Made of stainless steel and spring
loaded to hold on securely at speeds up
to 65 mph.
DUB 1500
DUB 1501
DUB 1502
Whitecap S/S Flagstaff
•
•
•
•
•
Clamp-on agstaff pole
Pole: 304 S/S
Clamp 316 S/S
Diameter 1/2" x Length 17"
Clamp tube 7/8"
WHI S-5011
Perko Flag Staffs
Anodized aluminum tube and chrome plated zinc base.
Complete with o-ring seal. 3/4" base will t Perko 1218,
1265 bow lights and 1302 ag pole socket.
Part #
SCY 16-411004
Flag clips 2/pkg
Antenna ag clips 2/pkg
E/Z on ag clips 2/pkg
263
Length
Base Dia
PER 495-DP1-CHR
14"
1/2"
PER 495-DP2-CHR
14"
3/4"
PER 495-DP3-CHR
18"
3/4"
264
Flag Holders
Sea-Dog Rail Mount Flagpole
Taylor Made Rail Mount Flag Sockets
Made from 304 S/S and injection moulded
nylon.
• Length: 15-1/2"
Designed to securely fasten to either 7/8”- 1”
or 1-1/8” - 1-1/4” rails, these stainless steel
mounts will look great and provide years of
service. Both models are perpendicular to the
rail and are made for 1” diameter ag poles.
SED 327120-1
Sea-Dog Adjustable Rail Mount Flagpoles
Made from 304 S/S, injection moulded
nylon and polypropylene. Attach to 7/8" or
1" tubing.
EXTERIOR HARDWARE
SED 327122-1
SED 327124-1
7/8" to 1" rails
1-1/8" to 1-1/4" rails
TAY 973
TAY 974
Sea-Dog Flag Pole Sockets
17"
30"
Sea-Dog Rail Mount Flagpole Holder
Made from 304 S/S and injection moulded
nylon. Flagpole holder will accept any
agstaff with a 3/4" base diameter.
( agstaff not included)
• Length: 4-5/8"
Angled design stern socket in
chrome plated sand cast brass.
Part #
A
B
C
Fastener
SED 492211-1
3/4"
2"
1-3/4"
#6 FH
SED 492212-1
1"
2-1/2"
2"
#6 FH
SED 492213-1
1-1/4"
2-3/4"
2-1/8"
#6 FH
SED 327121-1
Sea-Dog Bow Form Flagpole
Sea-Dog Flush Mount Flag Pole Socket
Fits bow forms with 1/2" diameter ag pole
mounting holes. Comes with split rings for
easy ag attachment.
• Length: 13-3/16"
SED 328110-1
• Investment cast 316 S/S
• Use #12 F.H. screws
Sea-Dog Pulpit Flagpole
Fits 7/8" - 1" tubing and comes
complete with fasteners and split rings
for easy ag attachment.
• Length: 15-1/2"
SED 328115-1
Taylor Made S/S Flag Poles
This deluxe ag pole set features highly polished
stainless steel from top to bottom.
The staff is made from 1" 304
stainless steel. The nial and base are
cast 304 stainless steel. The unique
ag clips are cast from 304 stainless
steel which holds your ag taut so
your ag is never tangled.
TAY 902
TAY 903
TAY 904
TAY 905
TAY 907
18"
24"
30"
36"
48"
Perko Flag Pole Socket
SED 491713-1
Perko Flag Pole Sockets
Flush mount design in chrome plated bronze.
Available in 2 styles and 3 sizes. Use #8 F.H. or
O.H. screws.
lnside
Dia.
Flange
Dia.
PER 218-DP1-CHR
3/4"
2"
PER 219-DP1-CHR
3/4"
2"
PER 218-DP2-CHR
1"
2-3/8"
Part #
PER 219-DP2-CHR
1"
2-3/8"
PER 218-DP3-CHR
1-1/4"
2-5/8"
PER 219-DP3-CHR
1-1/4"
2-5/8"
218
219
Perko Flag Pole Sockets
• Upright style socket
• Chrome plated bronze
• Uses #8 F.H. or O.H. screws
Clamp on socket is designed for mounting on a
3/4"- 1" railing. Chrome plated zinc with a black
plastic knob.
• Socket inside diameter: 3/4"
PER 220-DP1-CHR
3/4"
2-1/8"
PER 220-DP2-CHR
1"
2-1/2"
PER 1302-DP-CHR
PER 220-DP3-CHR
1-1/4"
2-3/4"
Part #
lnside Dia
Dia Flange
265
Bilge Blowers
Delta 'T' Marine LIL' Champ 4" Blowers
DTS 500-304121-IP
DTS 500-304242-IP
12V
24V
Parts:
DTS 505-201251
Hose adapter for intake
Tough, corrosion proof reinforced plastic
housing. Reliable automotive type motor
for long life and low current operation.
Unit can be rotated in the mounting
bracket to facilitate installation. 3"
intake. Air ow: 105 CFM.
• 5-1/2" H x 5" W x 6-3/4" L
12 volt, 4.3 amp
ITT 35515-0010
Electrohome 3" Bilge Blower
12 volt/8 amp. ABS plastic housing.
3 inch intake pipe. Air ow 100 CFM.
Flange mount allows discharge port to be
fastened directly to a at external surface to
minimize required ducting.
WES MB-125
Optional mounting bracket allows an "inline" installation of bilge blower. Bracket may be rotated to permit
installation in any direction.
WES BB101A
Sea-Dog 3" Bilge Blower
•
•
•
•
12V, 3 amp
ABS construction
100 cubic feet per minute
Uses 1/4" fasteners
SED 435210
Attwood Inline Turbo Bilge Blowers
Higher system air ow and lower amp draw. Tough, corrosionproof ABS housing dampens sound and vibration. Features include
a smaller, more compact straight-thru design, integral mounting
bracket and hose retention tabs. Scienti cally designed ve-blade
fan features a nose cone and specially cambered stator vanes.
Jabsco/PAR 4" Bilge Blowers
Tough, corrosion proof reinforced plastic
housing. Reliable automotive type motor for
long life and low current operation.
4" intake. Air ow: 250 CFM. Available in
12 or 24 volts.
• H: 9" x W": -3/4" x L: 8-3/4"
ITT 35400-0000
ITT 35400-0010
12V
24V
Jabsco/PAR 4" Continuous Duty Bilge Blowers
•
•
•
•
Flange mount
250CFM
Minimum 10,000 hour motor
H: 9-1/8" x W: 8-3/16" x L: 8"
ITT 35760-0092
ITT 35760-0094
► Also See:
12V, 11 amp
24V, 6 amp
Blower Hose pg 564
Size
AxBxCxD
3"
3-5/8" x 4-1/2" x 5-1/16" x 3"
4"
4-17/32" x 5-1/2" x 6-1/16" x 4"
Part #
Volts
Hose Size
CFM
Amp Draw
Size
12
3"
120
2.6
3"
ATT 1733-4
12
3"
120
2.6
4"
ATT 1745-1
24
4"
200
1.9
4"
Standard
ATT 1731-4
Water-resistant
EXTERIOR HARDWARE
• Flow rates to 350 CFM
• Performs well even under static
pressure loads
• High-impact marine grade plastic
housing
• Internally mounted motor for compact
design
• Sealed D/C direct-drive motor. The
motor is a totally enclosed (TEAO),
double-shielded, ball bearing type, which is constructed with
die cast aluminum end plates, O-ring seals, stainless steel shaft
and tough black Te on epoxy coating for superior corrosion
resistance. Armatures are dynamically balanced for quiet,
vibration-free operation)
• Dynamically balanced armatures for quiet vibration-free
operation
• Includes universal powder coated bracket for a wide variety of
mounting options
• Slim pro le H: 10" x W: 4.43" x D: 11.5"
Jabsco/PAR 3" Flexmount Bilge Blower
266
Bilge Blowers / Vents
Attwood Modular Vents
Attwood
Turbo 4000 Series Inline Blowers
Utilizing advanced fan blade design
techniques, these blowers match air ow of
existing in-line blowers at a signi cantly
reduced noise level. For added durability,
Attwood incorporates an engineered plastic
housing that resists deformation during
installation and prevents blade to housing
interference.
4" 12V blower
4" 12V water resistant blower
ATT 1747-4
ATT 1749-4
EXTERIOR HARDWARE
Centre white
End white
ATT 1438-F1
ATT 1439-F1
Rule Inline Bilge Blowers
Designed for ef cient, high output
operation, these blowers offer front and rear
seals and corrosion resistant motor housing
for long life. Mounts on any at surface.
Part #
Modular construction allows these patented vents to accommodate
any ventilation opening size by interlocking two or more centre
sections. End sections interlock to the centre section for a nished
appearance. The A.B.S plastic will not corrode or discolour.
Attwood Flush Louvred Vent
Size
Volts
C.F.M.
Amps
RUL 140
3"
12
135
2.9*
RUL 240
4"
12
235
4.3*
*Rated at 13.6 volts
Canted louvres de ect rain and
spray and help conceal the duct.
Vent can be painted to match boat
gelcoat. ASA plastic UV stable, will
not discolour.
• Use #8 screws
• 2-3/4" W x 17-9/16" L x 1/4" H
White
ATT 1425-5
Attwood Collector Boxes
Black Polystyrene plastic construction for corrosion free service.
Designed for air intake or exhaust. Takes 3" hose.
ATT 1341-1
For model 1494 and 1425 vents
• Box cavity measures 15/16" W x 15-7/16" L x 4" D
ATT 1345-1
For model 1495 vent
• Box cavity measures: 2-3/16" W x 16" L x 3-15/16" D
ATT 1348-1
For model 1438 and 1439
• Box cavity measures: 2-3/46" W x 18" L x 5" D
• For 4" hose
Attwood Louvred Vent
• Made from rugged ABS plastic
• Installation hole: 2-1/4" x 16-1/8"
• L: 17-7/8" x W: 3-7/16" x D: 3/4"
ATT 1495-1
ATT 1495-A1
Off-White
Black
Attwood Venturi Vents
Made of rugged ABS plastic,
will not discolour or corrode.
• Width: 2-3/4" x Length: 17" x Height 11/16"
• Installation hole: 2-1/8" x 15-1/2"
Chrome
Black
White
ATT 1494-5
ATT 1494-A5
ATT 1494-F1
Sea-Dog ABS Collector Boxes
Vacuum formed ABS plastic, available in right and left hand
versions for 3 and 4" hose. Depth: 5"
Part #
Hose
A
B
Use W/Vent
Mount
SED 331293
3"
12-1/4"
3-5/8"
331290
337290
Right
SED 331294
4"
12-1/4"
3-5/8"
331290
337290
Right
SED 331296
3"
12-1/4"
3-5/8"
331290
337290
Left
SED 331298
4"
12-1/4"
3-5/8"
331290
337290
Left
SED 331303
3"
7-1/4"
3-5/8"
331300
Left
267
Vents
Sea-Dog Slotted Ventilator
Perko Louvred Ventilators
• Made of ABS plastic
• 5 louvre engine vent
• L: 13-1/4" x W: 4-3/4" x D: 1-1/6"
334
335
336
White
Black
SED 337290
SED 337291
• Chromed brass
• Screw size #4 R.H
Sea-Dog Louvred 8 Slot Vents
Part #
Size
Louver Length
Horizontal x 2
3" x 2-1/2"
PER 334-004-DP
5-1/2" x 2-1/2"
2"
PER 334-006-DP
8" x 2-1/2"
2"
SED 331200
2"
EXTERIOR HARDWARE
• Stamped 316 stainless steel
• Use #6 R.H. screws
• L: 16-3/8" x W: 2-7/8" x D: 7/8"
PER 334-002-DP
Horizontal x 3
Sea-Dog Louvred Ventilators
Made of injection molded ABS plastic.
• L: 17-1/2" x W: 2-5/8" x D: 1-7/8"
5-1/2" x 3"
2"
PER 335-009-DP
8" x 3"
2"
11" x 3-1/2"
3"
PER 335-09A-DP
Vertical x 1
White
Black
SED 337210-1
SED 337211-1
PER 335-006-DP
Sea-Dog Slotted Ventilators
PER 336-05A-DP
5-3/8" x 4"
3"
PER 336-06A-DP
6-3/8" x 4"
3"
Sea-Dog Louvred Vent
Stamped 316 Stainless Steel. Use #6 R.H. screws.
Part #
A
B
C
D
Louvers
SED 331290-3
SED 331300
3-5/8"
12"
4-1/2"
12-7/8"
5
3-5/8"
7-1/8"
4-1/8"
8-1/8"
3
• Injection molded black ABS plastic
• Use #8 FH screws
Cutout
Part #
Sea-Dog Stainless Steel Louvred Vents
SED 337500
Overall
A
B
C
D
2-15/16"
6-7/8"
3-7/8"
7-7/8"
Sea-Dog Louvred Vents
• 304 stamped S/S
• Use #6 RH screws
A
B
SED 331380-1
Part #
5"
2-5/8"
SED 331390-1
5"
4-5/8"
SED 331400-1
9-1/8"
4-5/8"
SED 331410-1
5"
9"
• Injection molded ABS plastic
Cutout
Part #
Overall
Colour
A
B
C
D
SED 337400-1
Black
3-11/16"
9"
4-7/8"
10-1/8"
SED 337401-1
White
3-11/16"
9"
4-7/8"
10-1/8"
268
Vents
Sea-Dog Locker Vent
Perko Chrome Cowl Ventilator
• Stamped 304 S/S
• 6-3/4" L x 2-3/8" W
• Chrome plated zinc with a black
plastic base
• For 3" duct
• Opening square inches: 8"
• 5-3/4" L x 4-3/8" W x 2-5/8" H
SED 331620-1
PER 1312-DP-CHR
Sea-Dog Screened Vents
Attwood Cowl Ventilator
EXTERIOR HARDWARE
• 304 S/S construction
• Use #10 FH fasteners
Part #
A
B
C
D
SED 331712
8-5/16"
2-1/4"
7-11/16"
N/A
SED 331713
8-13/16"
3-3/8"
8-3/16"
2-3/4"
For use with 3" I.D. ventilation hose.
Features exible hose ange that is
screwed onto base, then vent snaps onto
the ange. Constructed of chrome-plated
die-cast Perma-Plate ZAMAK. Flange is
plastic. Use #8 screws.
• Length: 6" x Width: 5-5/16" x Height: 2-1/4"
ATT 1364-A1
Sea-Dog Stainless Steel Midget Vents
Perko Transom or Locker Ventilator
• Chrome plated brass
• 7" x 2-1/2"
PER 550-DP-CHR
Stamped 304 Stainless Steel. Uses #6 RH fasteners.
Part #
• Grill type screen
• 6" x 2"
PER 1271-DP-CHR
• Grill type screen
• 8-3/8" x 2-1/4"
A
B
C
SED 331360
1-5/8"
1-3/4"
1/2"
Bulk
SED 331360-1
1-5/8"
1-3/4"
1/2"
Display
SED 331370
2-1/4"
2-1/8"
5/8"
Bulk
SED 331370-1
2-1/4"
2-1/8"
5/8"
Display
Perko Clam Shell Ventilator
• Base dimension: 4" x 3-3/4"
• 1-5/8" H x 2-1/2" W
PER 1238-DP-CHR
PER 339-DP-CHR
Perko Ventilator
Perko Clam Shell Ventilators
• Chrome plated brass frame
• Perforated stainless steel screen
• 7-1/4" L x 1-1/2" W
PER 707-DP-CHR
Perko Cowl Ventilator
• Chrome plated zinc for 3" duct
• Opening square inches: 7-1/3"
• 5-1/4" L x 4" W x 2-3/4" H
Package
Part #
Length
Width
Height
PER 315-DP1-CHR
1-5/8"
1-1/2"
7/16"
PER 315-DP2-CHR
2"
2"
9/16"
Gemlux S/S Clamshell Vents
PER 870-CHR
Stainless steel heavy duty .80 thickness.
Part #
Height
Width
Depth
Fastener
GEM 330839-2
7/8"
1/2"
1-5/8"
#4
GEM 330851-1
9/16"
2"
2"
#6
269
Vents
Beckson Ventilators
Sea-Dog Hose Thru Vents
Vacuum-formed white ABS air scoops
with white KORAD® cap to prevent
cracking or discolouring.
• 1-1/2" H x 5-1/2" W x 7" D
BEC C-4
• Injection molded polypropylene
Sea-Dog Half Shell Vent Covers
A
B
C
SED 331464
Part #
4"
2-3/16"
9/16"
SED 331465
5"
2-9/16"
7/8"
Colour
A
B
C
Hole
White
2-13/16"
5/8"
3-5/8"
3"
SED 337320
Black
2-13/16"
5/8"
3-5/8"
3"
EXTERIOR HARDWARE
Formed 304 stainless steel construction. Vent covers t part number
SED 331424 and SED 331425 round vents. They also can be used
as nger pulls. Use #6 RH fasteners.
Part #
SED 337310
Sea-Dog Flush Vents
• Injection molded ABS plastic
Sea-Dog Stainless Steel Clam Shell Vents
Part #
A
B
C
Hole
Black
Stamped 304 Stainless Steel. Bulk. Uses #6 RH screws.
Part #
A
B
C
SED 331340
7"
5-3/4"
2-1/4"
SED 331350
7-1/2"
6-3/4"
2-7/8"
SED 337326-1
2-13/16"
2-3/4"
3-5/8"
to 3"
SED 337426-1
3-9/16"
3-3/4"
4-15/16"
to 4"
SED 337316-1
2-13/16"
2-3/4"
3-5/8"
to 3"
SED 337416-1
3-9/16"
3-3/4"
4-15/16"
to 4"
White
Sea-Dog Deck Drain/Locker Vents
Sea-Dog Nylon Hose Vents
• ABS plastic
• Use #10 FH fasteners
SED 340021-1
SED 340041-1
SED 340020-1
• Injection molded ABS
Part #
4-3/16" diameter, White
5-5/8" diameter, White
4-3/16" diameter, Black
ITC S/S Clad Vents
A
B
C
Hole
Black
SED 337325
2-13/16"
2-7/16"
3-5/8"
3"
SED 337425
3-9/16"
3"
4-15/16"
4"
White
SED 337315
2-13/16"
2-7/16"
3-5/8"
3"
SED 337415
3-9/16"
3"
4-15/16"
4"
Highly polished stainless steel clad
cover plate over plastic base vents are
available in 3” (3.25” cutout) & 4”
(4.25” Cutout) diameters. Each features
the patented press- t that grips the cutout
hole and eliminates the need for fasteners.
ITC 81932SS-HP-D
ITC 81933SS-HP-D
3"
4"
Perko Locker Ventilators
• Use #6 R.H. fasteners
PER 330-DP1-CHR
PER 330-DP2-CHR
2-1/2" Dia
3-1/4" Dia
270
Vents
Sea-Dog Drain Cover
•
•
•
•
Nicro Airvent 500
Stamped S/S
Works well as a locker ventilator
3-1/4" diameter
Use #6 RH fasteners
The Air Vent 500 is an economical
passive exhaust vent that moves a high
volume of air. ABS construction with a
frosted polycarbonate centre panel which
also allows light down below. This vent
will move 600-1000 cubic feet of air per
hour in a 15 knot breeze. It has a locking shut-off damper operated
from below. The low pro le vent screws directly to the deck.
Height: 1-3/4”, Dia: 7”, and uses a 3-3/4” cut out hole.
SED 331600-1
Sea-Dog Butter y Vents
• Stamped 304 S/S
• Features side knob
EXTERIOR HARDWARE
SED 331445
SED 331455
4" diameter
5" diameter
Nicro Solar Mini-Vents
Sea-Dog Ship's Ventilator
• Centre knob, twist to open or close
• All S/S construction
• Screw size #6 R.H.
SED 331450
5" diameter
Sea-Dog Stainless Steel Round Louvred Vents
• 304 stamped S/S
SED 331424-1
SED 331425-1
4"
5"
The Solar Mini-Vent is the smallest
diameter solar vent. Just 7" across
and 1-3/4" high. It is also very
durable, since it is made of frosted
polycarbonate with UV inhibitors. The
Solar Mini-Vent operates only as an
exhaust vent. It will remove around 700 cubic feet of air per hour at
night in a 15 knot breeze. This vent has a shut-off damper operated
from below. Attaches directly to the deck. Cut out: 3-3/4".
NIC N20030 Vent with S/S cover
Parts:
NIC 28830
Cover only, S/S
Nicro Solar Vent
Sea-Dog Cowl Vents
Durable and exible white PVC with
traditional red inside cowl. Cowl snaps
on to deck plate securely. Cowl may be
removed and replaced with ush deck
plate closure in rough weather. Vents
come complete with deck plate.
Part #
3"
NIC 28810
Description
Height
SED 727130
3" Low pro le vent
5"
SED 727140
4" Low-pro le vent
5-7/8"
SED 727135
3" Standard vent
7-3/4"
SED 727139
3" Deckplate only
SED 727149
4" Deckplate only
This solar vent provides boaters with fresh
air ventilation.
• Rechargeable battery allows for
24-hour continuous operation
• Whisper quiet operation
• Interchangeable intake and exhaust
fans
• Direct to deck installation
• Built-in on/off switch
• 2-year limited warranty
NIC N20703-S
NIC N20704-S
3"
4"
Parts:
NIC 20590
Replacement battery
Vetus Mushroom Ventilators
Oceanair Vent/Light Combo
A new way to provide light and ventilation
through the same unit. The combined
extractor fan and integral halogen light are
especially bene cial in con ned areas, such
as boat shower rooms or galleys. Can be
installed as a wall, ceiling or panel xture.
Made from temperature resistant composite material, the unit has
three modes of operation: combined, fan or light.
• Long life 2.8W motor
• 50,000 hours operating life expectancy
• Ideal for use in con ned space
• Diameter: 5-1/2" x Cutout: 4"
OCE VL-12V-C
OCE VL-12V-W
Chrome
White
• Polished 316 stainless steel construction
• Includes mosquito screen and synthetic counter ange
• Screw size #8 R.H
Flow Area
Square inch
Dia
Cutout
VTS PORTOS
Flow 4.7"
4-5/8"
3-11/32"
VTS ATHOS
Flow 7.2"
6"
4-13/16"
Part #
Vents / Tank Vents
Vetus UFO Deck Ventilator
Stainless steel permanently open ventilators are
rain and splash proof. Complete with a plastic
ventilation grill for nishing purposes.
• Outside dia; 7-7/8", Height; 1-13/16"
• Finishing grill Dia: 4-13/16"
• Uses #8 screws
VTS UFO
Perko Gas Tank Vents
• Chrome plated pressure cast bronze
• Monel wire mesh screening
Hose
Size
Max.
Thickness
PER 509-DP4-CHR
5/8"
3/4"
PER 509-DP5-CHR
3/4"
5/8"
Part #
This 12 volt fan is designed for saloons, cabins,
toilets and is ideally suited for heat extraction
near refrigerators. Hardly audible and suitable for
installation to both ceiling and wall it can also be
used together with VETUS deck ventilators UFO
and UFO-Trans. With the extremely low energy
consumption of 0.22 Amp. at 12 volt, this ventilator is particularly
suitable for boats. The special long-life computer motor has a lifetime of not less than 50,000 hours. Since the motor does not have
carbon brushes, the noise level is extremely low.
Chrome plated pressure cast bronze with monel
wire mesh screening. Elbow is bronze.
• Maximum thickness: 7/8"
Technical Details:
• The long life computer motor can run continuously
• Life expectancy is at least 50,000 hours of operation
• The capacity is 42 cfm
• Provided with a switch for 2 speeds
• Static pressure: 1/4" H2O
Chrome plated pressure cast bronze with
monel wire mesh screening.
• Max. thickness: 5/8"
Part #
Pipe Size
PER 503-DP3-CHR
3/8" x 3/8"
PER 503-DP4-CHR
1/2" x 1/2"
PER 515-DP3-CHR
PER 515-DP4-CHR
3/8"
1/2"
VTS FAN12
Perko Gas Tank Vent
Made from 316 stainless steel this tank
vent is attractive in appearance and
very functional. Has a 30 mesh monel
wire screen for a ame arrester. Can
be used for either a gas, waste or water
tank. Uses NPT 2-1/2" long threads and
comes with a bronze retaining nut.
MEC 3/4" NPT
MEC 1" NPT
MEC 1-1/2" NPT
1" head diameter
1-3/8" head diameter
1-3/4" head diameter
Whitecap Gas Vents
Stainless steel ush round head vents
for 9/16" hose.
• Hole size: 3/4"
WHI 6005C
WHI 6006C
PER 506-DP4-CHR
Perko Gas Tank Vent
Chrome plated cast bronze with removable
30 mesh, monel wire screen ame arrester.
• 1/2" NPT. O.D. ange: 2-1/2"
• Neck length: 1-1/2"
PER 505-DP-CHR
Sea-Dog Flush Mount Tank Vent
Straight
90°
Gemlux Flush Mount Gas Tank Vents
Can be installed with vent up or down. Extra
wide ange . Includes GEMLUX® screen,
vent cover, thin backing plate and thick
backing plate for custom t. Fits 5/8" hose.
Requires a 1-1/2" cutout.
GEM 330954-1
GEM 330956
Chrome plated zinc with monel wire
mesh screening.
• Hose size: 5/8"
• Max. wood thickness: 3/4"
Investment cast 316 stainless steel.
SED 353210-1
Sea-Dog Flush Mount Tank Vent
90° elbow
Straight
90° investment cast 316 stainless steel construction.
SED 353230-1
EXTERIOR HARDWARE
Vetus UFO Deck Ventilator
Mecca Tank Vents
271
272
Tank Vents
Sea-Dog Stainless Steel Gas Tank Vent
Sea-Dog Nylon Gas Tank Vents
Comes with rubber gasket.
SED 352210-1
Injection molded nylon available in black or white.
Sea-Dog Die Cast Zinc Gas Tank Vent
SED 357100-1
SED 357105-1
Black
White
EXTERIOR HARDWARE
Marelon Tank Vent
Comes with rubber gasket. For 5/8" hose. Chrome plated nish.
SED 352110-1
Sea-Dog Chrome Zinc Gas Tank Vent
A new idea in fuel tank vents. For hulls with solid
cores only. Unit press- ts into 3/4" diameter hole
without the need of a nut. Stainless steel screen will
not corrode and has no plating to chip. These vents
are precision molded in high-strength non-corrosive
Marelon® making them completely free from
corrosion and electrolysis.
• For 5/8" hose. 2.75 cm x 7 cm.
MPS 907029
Perko Black Gas Tank Vent with Swivel Elbow
SED 352100-1
Sea-Dog Chrome Brass Gas Tank Vent
Black plastic cap with zinc alloy elbow and
removable 30 mesh, stainless steel screen ame
arrester. Design allows elbow to be rotated to
any position.
• Max hull thickness 3/4"
• Hose size 5/8"
PER 571-DP4-BLK
Marine East Plastic Gas Tank Vent
Comes with rubber gasket.
Black plastic vent with a 1-1/4" diameter head. 100o
hose barb for 5/8" hose.
• Maximum hull thickness 3/4"
SED 352020-1
Sea-Dog Gas Tank Vent
MEP 3012
Attwood Gas Tank Vent
Unique design makes this gas tank vent extremely splash resistant.
Constructed of fuel-resistant polypropylene, totally corrosion
resistant. Stainless steel ne meshed screen can be easily cleaned
by unscrewing the exterior cap.
• For use with 5/8" I.D. hose
• Installation hole diameter: 3/4"
Machined brass chrome plated.
SED 352010-1
Sea-Dog 90 Degree Gas Tank Vents
ATT 1607-3
Attwood 90 Degree P-Trap Fuel Tank Vents
90o hose tting for tight areas. Comes with rubber gasket.
Part #
A
B
C
Construction
SED 352030-1
7/8"
2-3/8"
5/8"
Chromed brass
SED 352230-1
1"
2-5/8"
5/8"
316 S/S
These low pro le fuel tank vents help prevent water from entering
the fuel tank during normal sea conditions and washdowns. The
patented design features a series of baf es and traps
keeping water out and eliminating the need for an
anti-siphon loop in the vent hose.
• For 5/8" I.D. hose
ATT 1670-3
ATT 1671-1
Black with black cover
Black with white cover
273
Deck Plates
Armstrong Nautical Deck Plates
Tempress Pry Out Deck Plates
Watertight deck plates with secure snap- t
closure and o-ring seal. Flange has bevelled
edge, pry out notch and six countersunk
fastener holes. Available in 6" and 8" sizes
with safety textured surface. Structural
material stands up to tough service, extreme weather, and solvents
(even acetone).
• Uses #8 PH fasteners
Part #
O.D.
Cut Out
Colour
TMP 43190
5-5/8"
8-1/8"
6-3/4"
White
TMP 43191
5-5/8"
8-1/8"
6-3/4"
Ivory
TMP 43195
5-5/8"
8-1/8"
6-3/4"
Black
TMP 43330
7-7/8"
10-1/8"
8-3/4"
White
TMP 43331
7-7/8"
10-1/8"
8-3/4"
Ivory
TMP 43335
7-7/8"
10-1/8"
8-3/4"
Black
• Watertight - completely seals against water intrusion.
• One-piece unit - no trim ring, fasteners, or sealant.
• Ease of use - a turn of the “T” handle releases or secures the
deck plate.
• Patented design loads the deck plate at the centre, distributing
sealing pressure uniformly at the seal ring.
Part #
Cut Out
Bar Length
ARM DP-6"BLACK
6-3/4"
8-1/4"
ARM DP-8"BLACK
8-3/4"
10-1/4"
ARM DP-10"BLACK
10-3/4"
12-1/4"
Replacement ''O'' Rings
TMP S-0053
TMP S-0054
TMP S-0055
4" Deck plate o-ring
Beckson Twist Out Deck Plates
Deck plate is designed to conceal mounting fasteners under the
quick twist cover. The low pro le cover is self-centering, features
uniquely styled nger grips and quickly locks
in place with a 1/8 twist. Three separate sealing
rings assure a watertight closure. Plates are
molded of high-impact, marine quality plastic,
with ultraviolet inhibitors for prolonged service.
Tempress Screw-in Deck Plates
Watertight deck plate with an O-ring seal and
grooved ange bottom for bedding compound
retention. Screw-in styrene centre. Use #8 PH
screws.
Part #
BEC DP50-W
5" White
I.D.
O.D.
Cut Out
Colour
TMP 43030
4"
6-1/8"
4-3/4"
White
TMP 43035
4"
6-1/8"
4-3/4"
Black
Beckson Screw Out Deck Plates
TMP 43130
5-7/8"
8-1/8"
6-3/4"
White
Screw-out plate was designed to provide access without the use
of tools, with a single start, non-jamming (no cross-thread), extra
strong, self-cleaning buttress thread. They incorporate a selfaligning centre and an innovative gasket to assure a watertight
seal. A patented back-up sealing wall leaves the plate waterproof,
even if the gasket is removed. A screw-out plate should be used in
compartments where a change in air pressure due to temperature
or oil canning can occur. Deck plates also are
used for access, inspection, and clean out for
tanks and compartments.
Rabud Deck Plate
Screw out 6" plastic deckplate with clear cover
and O-ring for a water tight seal.
RHS 6"LCW
Bomar Locking Centre Deck Plates
BEC DP40-W
BEC DP60-W
High impact, polycarbonate U.V.
stabilized deck plates. Acetone
resistant. The centre plate has a nonskid
nish, a unique nger-tip lift and twist
locking mechanism, and an O-ring seal.
Uses #10 F.H. fastener.
4" White
6" White
Sea-Dog Screw-Out Deck Plates With Collar
Dimensions
Part #
Size
Colour
I.D.
O.D.
Cut Out
BOM G840
8"
White
7-5/16"
10-9/16"
8-1/2"
BOM G844
10"
White
9-1/4"
12-1/2"
10-1/2"
BOM G845
10"
Black
9-1/4"
12-1/2"
10-1/2"
• Screw-in, molded collar deck plate
Part #
Colour
A
B
C
D
SED 337142
White
4"
5-3/4"
4-1/2"
5-1/8"
SED 337167
Black
6"
8-1/8"
6-1/2"
7-1/4"
EXTERIOR HARDWARE
I.D.
274
Deck Plates / Hatches
Sea-Dog Screw-Out Deck Plates
Sea-Dog Inspection Covers
•
•
•
•
Screw out deck plates are ABS injection molded to the highest
standards using top quality UV stabilizers and anti-oxidants.
Part #
A
B
C
D
SED 337145-1
4"
5-3/4"
4-1/2"
5-1/8"
SED 337145
4"
5-3/4"
4-1/2"
5-1/8"
SED 337155-1
5"
6-3/4"
5-1/2"
6-1/8"
SED 337165-1
6"
8-1/4"
6-1/2"
7-1/4"
Black
EXTERIOR HARDWARE
White
SED 337140-1
4"
5-3/4"
4-1/3"
5-1/8"
SED 337150-1
5"
6-3/4"
5-1/2"
6-1/8"
SED 337160-1
6"
8-1/4"
6-1/2"
7-1/4"
SED 337160
6"
8-1/4"
6-1/2"
7-1/4"
Injection molded ABS
Uses #10 fasteners
Cutout: 4-1/4"
Diameter: 5-5/8"
SED 337050-1
SED 337051-1
Black
White
Sea-Dog
Concealed Fastener Screw Out Deck Plate
• Concealed fastener deck plate with collar
• Injected molded nylon/ABS construction
• Cutout: 4-1/2", Ring: 5-3/4"
SED 337247
Black
Rabud Access Hatches
Heavy duty, chemical resistant, white
UV stabilized plastic deck hatches with
stainless steel hinges.
• Fastener #10 F.H.
Part #
Suf x (-1) indicates display package
RHS 711HLAW
Sea-Dog Screw Out Deck Plate, w/ Clear Centre
RHS 1020HLAW
Parts:
RHS 1033
I.D.
O.D.
7" x 11"
10-1/4" x 14-3/8"
10" x 20"
13-1/2" x 23"
Replacement handle
Beckson Stow Away Hatch
SED 337146-1
4"
5-3/4"
4-1/2"
5-1/8"
This storage hatch can be used for
glove compartments, engine control
covers, re extinguisher storage, etc.
• Opens a full 180º
• Slip clip snubbing latch holds
cover closed
• Open centre cover handle provides easy nger
grip to open and close
• Outside: 6-3/4" x 12-3/4"
• Hole cut-out 4-1/2" x 10-1/2"
SED 337156-1
5"
6-3/4"
5-1/2"
6-1/8"
BEC PH410MWC-20
SED 337166-1
6"
8-1/4"
6-1/2"
7-1/4"
Made from injection moulded A.B.S./Polycarbonate these deck
plates allow for visual inspection of watertight compartments,
storage lockers and fuel ttings without even having to remove the
lid. Use #8 FH screws.
Part #
A
B
C
D
Black
White
SED 337141-1
4"
5-3/4"
4-1/2"
5-1/8"
SED 337151-1
5"
6-3/4"
5-1/2"
6-1/8"
SED 337161-1
6"
8-1/4"
6-1/2"
7-1/4"
Seadog Deck Plate
SED 335654
Hatches
275
Beckson HT Series Access Hatches
Beckson HT Series Hatches offer a sleek, low pro le (1/2") appearance, with nothing to snag lines on. Features
include hidden fasteners, integral 180o hinges and easy-grip latches. Designed for horizontal or vertical
installation. Integral hinge and latch systems assure perfect alignment and ease of installation. Ideal for all
types of storage, bait or sh wells, and electrical or fuel line access. Nonskid, diamond pattern surface.
Part #
Colour
Latches
I.D.
O.D.
Cut-Out
BEC HT-1115-W
White
1
7-1/4" x 11-1/4"
10-3/4" x 14-3/4"
7-7/8" x 11-3/4"
BEC HT-1115-D
Grey
1
7-1/4" x 11-1/4"
10-3/4" x 14-3/4"
7-7/8" x 11-3/4"
BEC HT-1424-W
White
2
10-1/2" x 20-3/8"
14" x 24"
11-1/8" x 20-7/8"
Ivory
2
14-5/8" x 17"
18-1/8" x 20-1/2"
15-3/8" x 17-3/8"
BEC HT-1821-W
White
2
14-5/8" x 17"
18-1/8" x 20-1/2"
15-3/8" x 17-3/8"
Tempress Hatch Liners
These tough, impact resistant liners are perfect for combining with the Tempress utility hatch to make a self-contained storage
compartment, live well, or dry gear locker. The 1" anged liners are installed underneath the hatch and anchored in place when hatch
ange screws are installed. The small anged liners are dropped in place and may remain portable. White.
Part #
Dimensions
Combines with Utility Hatch
7-1/8" x 11-1/8" x 6" deep
44290, 44293, 44230, 44231, 44233
TMP 41504
11-1/4" x 21-1/8" x 9" deep
44431, 44430, 44432, 44433
TMP 41506
11-1/4" x 21-1/8" x 12" deep
44431, 44430, 44432, 44433
TMP 41400
Tempress Access Hatches With Cam Latch
The Access Cam Hatch is made from a glass lled polypropylene, for strength and durability. All Access hatches are designed for heavy
traf c areas, and will withstand people walking or standing upon them. Features a dog down latch, that compresses the gasket to create a
weather tight seal with a quarter turn of the wrist. A patented integral hinge assembly that allows for easy lid removal. The bevelled skirted
lid covers all fasteners.
Part #
Colour
I.D.
O.D.
Cut-out
TMP 44330
White
7" x 11" (1115)
10-3/4" x 15"
8-3/4" x 12-5/8"
TMP 44333
Dark Gray
7" x 11" (1115)
10-3/4" x 15"
8-3/4" x 12-5/8"
TMP 44530
White
9-1/2" x 19-1/4" (1323)
13" x 23-1/4"
11" x 20-7/8"
TMP 44533
Dark Gray
9-1/2" x 19-1/4" (1323)
13" x 23-1/4"
11" x 20-7/8"
Fasteners required 10 ea. #12 pan head screws for 7" x 11"
Fasteners required 12 ea. #12 pan head screws for 9-1/2" x 19-1/4"
Tempress Access Hatches With Slam Latch
The Access Slam Hatch is made from a glass lled polypropylene,
for strength and durability. All hatches are designed for heavy traf c
areas, and will withstand people walking or standing upon them.
Features an easy close slam latch that forms a weather tight seal just
by closing the hatch. Hatches also utilize a patented integral hinge
assembly that allows for easy lid removal. The bevelled and skirted
lid covers all fasteners for a clean look above or below decks.
Part #
Colour
I.D.
O.D.
Cut-out
TMP 44230
White
7" x 11"
10-3/4" x 15"
8-3/4" x 12-5/8"
TMP 44430
White
9-1/2" x 19-1/4"
13" x 23-1/4"
11" x 20-7/8"
Fasteners required 10 ea. #12 pan head screws for 7" x 11"
Fasteners required 12 ea. #12 pan head screws for 9-1/2" x 19-1/4"
Utility Hatch Parts
TMP S-0006
TMP S-0007
TMP S-0009
TMP S-0010
TMP S-0011
TMP S-0013
1115 - White hinge (1pc)
1115 - Ivory hinge (1pc)
1115 - Grey hinge (1pc)
1323/1330 - White hinge (1pc)
1323/1330 - Ivory hinge (1pc)
1323/1330 - Grey hinge (1pc)
EXTERIOR HARDWARE
BEC HT-1821-N
276
Bomar Hatches / Portlights
Bomar Nibo Low Pro le Traditional Hatches
EXTERIOR HARDWARE
• Anodized HD aluminum frames
• Vent position
• Heavy-duty acrylic top
• Quick acting tie down dogs
This hatch is in a semi- ush style which
is the latest Eurostyle hatch for the high
performance cruiser/racer. Silver anodized
aluminum guarantees long lasting nish.
Special marine aluminum alloy with high
magnesium content. Tough acrylic top assures privacy, yet allows
in plenty of light. Fast and easy to adjust new style collet arm has
no knobs or parts to loosen and fall off or get caught on clothing.
Locked vent position. Models - '10A' have a 1" spigot.
Hatch
Opening
Hole Cut
Out
O.D. Deck
Flange
BOM 1000-10A
9-5/8"
9-5/8"
10-3/4"
10-3/4"
12-3/8"
12-3/8"
BOM 1029-10A
12-1/4"
17-3/8"
13-3/8"
18-1/2"
15"
20 1/8"
BOM 1039-10A
19-1/8“
19-1/8”
20-1/4"
20-1/4"
21-7/8"
21-7/8"
24"
24"
25-1/8"
25-1/8"
26-3/4"
26-3/4"
15-7/16“
15-7/16”
16-1/2"
16-1/2"
18-3/16"
18-3/16"
Part #
BOM N1049-10AX4
BOM 1070-10A
Bomar Nibo High Pro le Hatches
A heavy duty extruded hatch formed
into an attractive modern shape. Silver
anodized aluminum guarantees long
lasting nish. Special marine aluminum
alloy with high magnesium content.
Tough acrylic top assures privacy yet
allows in plenty of light. Fast and easy
to adjust new style collet arm has no
knobs or parts to loosen and fall off or get
caught on clothing. Heavy duty hinges.
The hatch has a locked vent position. Models - 'A' without spigot
and Models - '10A' with 1" spigot. Note: Screen will not install
without trim ring.
Hatch
Opening
Hole Cut Out
O.D. Deck
Flange
BOM 2029-10A
12-1/4"
17-3/8"
13-5/16"
18-7/16"
15"
20-1/8"
BOM 2039-10AX
19-1/8"
19-1/8"
20-3/16"
20-3/16"
21-7/8"
21-7/8"
BOM 2049-10AX
24"
24"
25-1/16"
25-1/16"
26-3/4"
26-3/4"
BOM 2070-10A
15-3/8"
15-3/8"
16-7/16"
16-7/16"
18-1/8"
18-1/8"
BOM N2080-10A
17-3/8"
17-3/8"
18-7/16"
18-7/16"
20-1/8"
20-1/8"
Part #
Bomar Parts for Molded Hatches 1000/2000 Series
P2000-27
P2000-18L
P2000-30
P2000-Arm
P2000-53
BOM P2000-18L I/O
BOM P2000-18R I/O
BOM P2000-20
BOM P2000-27
BOM P2000-25
BOM P2000-26
BOM P2000-30
BOM P2000-53
BOM P2000-52
BOM P2000-66
BOM P2000-84-R
BOM P2000-84-L
BOM P2000-75-17
BOM P2000-75-18
BOM P2000-75-21
BOM P2000-7510.75
BOM P2000-76-13
BOM P2000-76-17
BOM P2000-76-18
BOM P2000-76-21
BOM P2000-86
New style left latch dog assembly
New style right latch dog assembly
3" high pro le hinge
Mushroom Cap
Gasket low pro le
Gasket high pro le
Bracket for MK11 tie down
Latch dog assembly right/locking
Latch dog assembly left/locking
White screen keepers (nibs)
Latch dog assembly right/non-locking
Latch dog assembly left/non/locking
Right riser arm 1039
Left riser arm 1070
Left riser arm 1039
Left riser arm 1022
Left riser arm 1049
In./out.quick cap w/ sq shaft
Bomar Parts for 100 Series Hatches
Bomar cast hatches can be identi ed by having
a cast aluminum frame with molded hinges.
They generally have a cast aluminum riser.
BOM P100-07
BOM P100-09
BOM P100-52
P100-07
Female knob
Latch dog assembly
9/16" gasket
P100-09
Bomar
Molded Portlight Gray Series Rectangular
Stainless steel hardware, angled
spigot, white frame with clear lens,
complete with trim ring and screen.
• Hatch opening: 4" x 11"
• Cut-out: 5-1/2" x 12-1/2". O.D
• Deck ange: 7-13/16" x 14-11/16"
• Spigot length: 2-1/8"
BOM G512-AD-27
BOM GP902-01W
Replacement knob White
277
Hatch Accessories / Portlights
Bomar Hatch Trim Rings & Screens
Fits Hatches
Description
Colour
BOM NS2000-EX
Part #
N1000-10A, N2000-10A
Screen
N/A
BOM NT2000-BLK
N1000-10A, N2000-10A
Trim Ring
Black
BOM NT2000-OFF-W
N1000-10A, N2000-10A
Trim Ring
Off White
N1029-10A, N2029-10A, N0029-10FX, N0029-FXN
Screen
N/A
BOM NS2029-EX
BOM NT2029-BLK
BOM NS2039-EX
N1029-10A, N2029-10A, N0029-10FX, N0029-FXN
Trim Ring
Black
N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN
Screen
N/A
Trim Ring
Off White
Screen
N/A
BOM NT2039-BLK
N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN, N0639-10FX
Trim Ring
Black
BOM NT2039-OFF-W
N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN, N0639-10FX
Trim Ring
Off White
1049-10AX, 2049-AX
Screen
N/A
BOM NS7039-BK
BOM NS2049-EX
BOM NT2049-BLK
N1049-10A, N2049-10A, N0049-10FX, N0049-10FXN
Trim Ring
Black
N1070-10A, N2070-10A, N1070-10P, N2670-10AX
Trim Ring
Off White
N1070-10A, N2070-10A
Screen
N/A
BOM NT2049-OFF-W
BOM NS2070-EX
1070-10A
Trim Ring
Black
N1070-10A, N2070-10A
Trim Ring
Off White
BOM GT966-1
GT966
Trim Ring
Black
BOM GT966-6
GT966
Trim Ring
Off White
BOM NT2070-BLK
BOM NT2070-OFF-W
Beckson Opening Portlights
PO410DWC-20
These "Rain Drain" portlights will self-drain while tipped at angles, up to 45o. The frame and nishing ring
are made of high impact ABS plastic. Stainless steel hardware holds the Lexan window in place. Comes
complete with bug screen.
Opening
Cutout
Outside Size
BEC PO410DWC-20
Portlight #
BEC SCR 410
BEC GK-410
4" x 10"
4-1/2" x 10-1/2"
6-3/4" x 12-3/4"
BEC PO414DWC-20
BEC SCR 414
BEC GK-414
4" x 14"
4-1/2" x 14-1/2"
6-3/4" x 16-3/4"
BEC PO512DWC-20
BEC SCR 512
BEC GK-512
5" x 12"
5-1/2" x 12-1/2"
7-3/4" x 14-5/8"
BEC PO714DWC-20
BEC SCR 714
BEC GK-714
7" x 14"
7-1/2" x 14-3/8"
9-3/4" x 16-3/4"
BEC PO8RD-WC-20
-
BEC GK-8RD
8" round
8-1/2"
10-3/4"
Parts:
BEC LNZ-414C
Screen #
Gasket #
Clear lens 4” x 14"
Beckson Rain Shield
The external rain shield may be
fastened by screws or by bonding
to the exterior trim ring of opening
ports. This will keep out rain, spray
and provide shade.
• Projection from mounting surface is 2-1/2” (6.3 cm)
• Vertical dimension of hood overall, 3” (7.6 cm)
• Overall length: 16-3/4"
• Under hood length: 14-1/2"
• Use with 4" x 14" & 7" x 14" portlights
BEC RS14
EXTERIOR HARDWARE
1039, 2039
Sewn Screen for 1039-10A
BOM NT7039-OFF-W
278
Freeman Hatches
Freeman Aluminum Hatches
Oval & Square Hatches - Lift-Out
Freeman oval and square lift out aluminum or steel hatches are speci ed and used on all types of vessels
(tugs, shing boats, research vessels, rescue craft and barges). These hatches are ideal for full-size access
to void spaces, storage areas or lazarettes and for sh sorting or emergency escapes. A unique, ush handle
design linked to a positive four dog mechanism ensures a secure seal. Special, corrosion resistant, high
strength marine alloys combined with stainless steel, delrin and chloroprene are used to build hatches that
withstand torturous treatment.
• Guaranteed watertight to 30 feet of head
• Fast acting, ush, quarter turn handles
• Evenly spaced, positive locking dogs exert uniform pressure
Part #
EXTERIOR HARDWARE
Ring
Edge Seal
Clear Opening
Deck Cut
Overall
FRE 1218A
Aluminum
Compression
FRE 1524A
Aluminum
Compression
FRE 1524S
Steel
Compression
FRE 1926A
Aluminum
Compression
FRE 2020A
Aluminum
FRE 2424A
Aluminum
12" x 18"
15" x 21"
18.8" x 24.8"
14.1" x 20.3"
14.6" x 23.4"
17.6" x 26.5"
21.3" x 30.3”
16.3" x 25.9"
14.6" x 23.4"
17.4" x 26.5"
17.4" x 26.5"
16.3" x 25.9"
19.1" x 26"
21.8" x 28.6"
25.3" x 32"
20.9" x 27.9"
Knife Edge
20" x 20"
22.5" x 22.5"
26.4" x 26.4”
21.9" x 21.9"
Knife Edge
24.5" x 24.5"
27" x 27"
31" x 31"
26.4" x 26.4"
Round Hatches - Lift-Out
• Edge seal: Compression
• All Aluminum
Flush, round hatch ideal for quick access to valves and
pipes, shaft alleys, void spaces, or sh sorting. The three dog
mechanism ensures proper sealing tension.
Part #
Clear Opening
Deck Cut
Overall
FRE 8A
7.9"
10.3”
9.8”
FRE 12A
11.9"
14.8”
17.4”
FRE 15A
15”
17.8”
21.5”
FRE 18A
18”
20.9”
24.5”
Cover O.D.
Compression Sealing Method
Compression Seal Series Hatches have easy-to-clean spigots,
feature long gasket life, and are economical to purchase.
Aluminum Deck Rings are intended to be weld installed into
aluminum decks and bolt installed into other deck materials.
Steel Deck Rings are to be weld installed into steel decks only.
Watertight seal intermittent to 30 foot head, continuous 10 foot
head top-loaded pressure (on properly installed and adjusted
hatch assemblies).
Knife Edge Sealing Series
Knife Edge Seal Series Hatches feature a coaming with drain
gutter and an aggressive sealing rim edge
A drain tting can be installed to minimize water from entering
enclosure when hatch is initially opened
Hinged Hatches
• Edge seal: Compression
• All aluminum
Same features as Freeman lift out hatches. The unique hinging
device allows the hatch to be opened more than 180° and it " oats"
when the hatch is closed to facilitate a tighter seal.
Part #
FRE 18H/A
FRE 1524H/A
Shape
Clear Opening
Deck Cut
Overall
Round
18”
20.9”
24.5
Oval
14.6” x 23.5”
17.4 x 26.5”
21.6” x 30.5”
Freeman Hatch Replacement Parts
FRE 1524A-RING
FRE 1524S-RING
FRE 18A-RING
FRE 1926S-RING
FRE 9801-2003
FRE 9801-2004
FRE 9801-2005
FRE 0211-2004
FRE 9813-2001
15 x 24 aluminum ring only
15 x 24 steel ring only
Model 18 Aluminum ring only
19x26 steel ring
Gasket material, 12 x 18
Model 15 gasket material
Regular arm for F/1524A hatch
FRE 9813-2004
FRE 9801-2007
FRE 0211-2005
FRE CAM
FRE 0031-2001
FRE 0031-2064
FRE 0031-2077
FRE 0411-2004
Model 20 gasket
Regular arm for model 18
Cam button
Bushing w/ sleeve
Inside escape handle alum.
Aluminum actuator with pin
S/S knurled pin 1/4" x 2-1/4"
Oceanair Shades
279
Oceanair Surface Skyscreen
A roller blind in an ultra slim
cassette, designed to provide all
the bene ts of a blind for even the
smallest portlights. This blind may
be mounted on horizontal or vertical
surfaces adjacent to the portlight.
The cassette is made of anodized
aluminum and utilizes a unique heat
re ective blind fabric to give maximum protection from sunlight.
Manufactured in standard sizes to t most portlights.
It features a unique heat re ecting blind and
ultraviolet protected yscreen - providing
complete below deck privacy or bug free
ventilation. Unique black out blind and
yscreen cassette ts all main brands
of hatch and is designed to clear trim
moldings.
• The easy t solution for all budgets
• Ease of installation on the surface of the headlining,
ideal for retro t
• Ideal hatch solution for boats with thin decks, and soft,
or no headlining
• Soft-edged, low-pro le design
• Can be retro- tted to existing hatch trim surrounds,
providing the trim is less than 12mm
• Wide range of standard sizes
• Optional trim and liner systems resolve all throughdeck
engineering challenges
• Fully serviceable
Colour
Screen
LxW
Overall
W
OCE PSH-1-W
White
11" x 13-3/8"
15-1/8"
OCE PSH-2-B
Beige
11" x 15"
16-5/8"
OCE PSH-2-W
White
11" x 15"
16-5/8"
OCE PSH-3-B
Beige
12-5/8" x 18-1/8"
19-3/4"
OCE PSH-3-W
White
12-5/8" x 18-1/8"
19-3/4"
Part #
Comes with all the necessary ttings and screws.
Part #
Colour
Screen
LxW
Overall
W
Lewmar
Oceanair PleatedShade
Simple and quick to install in any
boat interior, they are self adjusting
for height and nonparallel use.
Stylish and practical for any interior.
OCE SFSS-60-W
White
20" x 20"
24-1/4" x 25-1/2"
OCE SFSS-60-B
Beige
20" x 20"
24-1/4" x 25-1/2"
Lewmar w/ PVC Screen
OCE SFSSL-20-B
Beige
13-5/8" x 8"
-
OCE SFSSL-20-W
White
13-5/8" x 8"
-
Colour
LxW
OCE SFSSL-30-W
White
18" x 12-7/8"
-
OCE PLS-1-CR
Beige
12" x 15"
OCE SFSSL-44-W
White
17-3/8" x 17-3/8"
-
OCE PLS-1-N
Navy
12" x 15"
OCE SFSSL-60-W
White
20" x 20"
24-1/4" x 25-1/2"
OCE PLS-2-CR
Beige
12" x 20"
OCE PLS-2-N
Navy
12" x 20"
OCE SFSS-1039-W
White
20-1/4" x 20-1/4"
24-1/2" x 25-3/4"
OCE PLS-3-CR
Beige
12" x 25"
OCE SFSS-1039-B
Beige
20-1/4" x 20-1/4"
24-1/2" x 25-3/4"
OCE PLS-3-N
Navy
12" x 25"
OCE SFSS-1049-W
White
25-1/8" x 25-1/8"
29-3/8" x 30-5/8"
OCE PLS-4-CR
Beige
12" x 30"
OCE SFSS-1049-B
Beige
25-1/8" x 25-1/8"
29-3/8" x 30-5/8"
OCE PLS-4-N
Navy
12" x 30"
OCE PLS-5-CR
Beige
12" x 40"
Part #
OCE PLS-5-N
Navy
Bomar
Taylor
12" x 40"
OCE SFSS-12/12-B
Beige
12" x 12"
N/A
OCE SFSS-12/12-W
White
12" x 12"
N/A
OCE SFSS-20/20-W
White
20" x 20"
N/A
A PVC liner and clip are required for proper installing.
Oceanair RailShade
OCE SL-2.5"-LINER-JOINT
OCE SL-4"-LINER-JOINT
The ideal roller blind for general use and
makes a cost-effective choice for hatches
and larger windows. RAILshade has a sleek,
silver-anodized cassette and may be ordered in
two sizes.
Part #
► NOTE:
Screen L x W
Overall W
OCE RSH-1-SA
14-1/8" x 15-3/4"
15-5/8"
OCE RSH-2-SA
18-1/2" x 20-1/8"
20"
Custom Sizes Available -Ask For a Quote
EXTERIOR HARDWARE
Oceanair PortShade
280
Hatch Adjusters
Bennett
Hatch Lifter Retro t Systems
Beckson Cam Latches
Retro- t your old Beckson hatches. Cam
latches enable the hatch to be opened or
closed with a single ip. Stronger than
knobs or levers. White.
Lift virtually any size hatch at the push of
a button. These single hydraulic cylinders
deliver 250 pounds of vertical lifting
capability and easily retro t to existing
Bennett trim tab hydraulic power units.
The Hatch Lifter shares the trim tab
Hydraulic Power Unit. When the hatch
is closed, system components are out of
view. Relief valve allows hatch to be lifted manually in case of
power failure. Cylinder is constructed of black anodized aluminum
with a stainless steel rod. Kits come complete with cylinder, rocker
switch, manifold, hardware, tubing, and ttings.
• Stroke: 24" x Closed: 29-3/8"
Complete assembly
Cam latch only
BEC PRK-AW
BEC PRK-W
Beckson Twist Knobs
EXTERIOR HARDWARE
Molded plastic twist knobs. Available with a
threaded male stud or with a female threaded
ferrule.
Part #
BEC PRT-AB
Knob
Colour
1/4 - 20 Male
Black
BEC PRT-B
1/4 - 20 Female
Black
BEC PRT-W
1/4 - 20 Female
White
BEC PRT-2B
1/4 - 20 Male
Black
BEC PRT-CB
5/16 - 16 Male
Black
BEN HL-1000-24"
Perko Portlight Chain
Stainless steel chain with chrome plated
ttings.
Use #8 screws.
• Total length: 7”
• Strap length: 1-7/8”
PER 441-DP-CHR
Lenco Electric Hatch Lifts
Lenco hatch lifts are made entirely of non-corrosive
materials and are completely submersible. Inline
motor design makes mounting easier and delivers
over 750 lbs. of lift. Clutchless ball screw design
always runs in sync on dual lift applications and
never binds. Stainless steel ram locks in any position.
Ballscrew spins freely when hatch is fully opened
or closed eliminating limit switches and burned out
motors. Motor draws 5 amps @ 12 volts. Lifts install
with a single power cable.
LOA Retracted
Stroke
LOA Extended
LEN HL-800
Part #
25"
8"
33"
LEN HL-1200
29"
12"
41"
LEN HL-1200S
25"
12"
37"
LEN 50015-001
Stud upper bracket
LEN 50014-001
Stud lower bracket
281
Gas Springs
Attwood Springlift Gas Springs
Attwood Stainless Steel Gas Springs
Nitrogen lled gas springs provide an excellent solution for opening
hinged panels and various other products. Doors, lids and windows
can be raised and kept open with assistance, yet can be smoothly
and easily closed. Various mounting brackets and fastening devices
make installation quick and simple. Attwood's black rod nish is
6-8 times more corrosion resistant than chrome.
A line of stainless steel gas springs that offer more durability. The
pressure tube and rod are super-tough #316 stainless steel alloy.
All other exposed components are stainless steel or marine-grade
composite.
• 8 mm Rod x 18 mm Cylinder
End
Fitting
Pressure
lbs.
ATT SS30-40#-5
10" - 7"
Socket
40
ATT SS33-20#-5
15" - 9.5"
Socket
20
ATT SS33-40#-5
15" - 9.5"
Socket
45
ATT SS34-20#-5
20" - 12"
Socket
20
110
ATT SS34-30#-5
20" - 12"
Socket
30
Socket
100
ATT SS34-40#-5
20" - 12"
Socket
40
28" - 16.5"
Socket
120
ATT SS34-60#-5
20" - 12"
Socket
60
ATT SL29-80#-1*
36.3" - 21.10"
Socket
80
ATT SS34-80#-5
20" - 12"
Socket
80
ATT SL30-20#-5
10" - 7"
Socket
20
ATT SS34-120#-5
20" - 12"
Socket
120
ATT SL30-40#-5
10" - 7"
Socket
40
ATT SS36-40#-5
17" - 10"
Socket
40
ATT SL30-60#-5
10" - 7"
Socket
60
ATT SL31-20#-5
5.25" - 7.5"
Socket
20
ATT SL31-30#-5
5.25" - 7.5"
Socket
30
ATT SL33-20#-5
15" - 9.5"
Socket
20
ATT SL33-40#-5
15" - 9.5"
Socket
45
ATT SL33-60#-5
15" - 9.5"
Socket
60
ATT SL34-20#-5
20" - 12"
Socket
20
ATT SL34-30#-5
20" - 12"
Socket
30
ATT SL34-40#-5
20" - 12"
Socket
40
ATT SL34-60#-5
20" - 12"
Socket
60
ATT SL34-80#-5
20" - 12"
Socket
80
ATT SL34-120#-5
20" - 12"
Socket
120
ATT SL35-40#-5
12" - 8.46"
Socket
40
ATT SL35-50#-5
12" - 8.46"
Socket
50
ATT SL36-40#-5
17" - 10"
Socket
40
ATT SL36-90#-5
17" - 10"
Socket
90
ATT SL38-60#-1
23" - 13"
Socket
60
End
Fitting
Pressure
lbs.
ATT SL1-20#-5
10" - 7"
Blade
20
ATT SL1-40#-5
10" - 7"
Blade
40
ATT SL3-60#-5
20" - 12"
Blade
60
ATT SL3-110#-1
20" - 12"
Blade
ATT SL27-100#-1
28" - 16.5"
ATT SL27-120#-1
Part #
Bracket Options
Black painted nish
Style
Mount
Holes
ATT SL-50B-P3-7
900
Ball 10mm
2
ATT SL-3HB-P3-7
Flat
Ball 10mm
3
ATT SL-81-1
Cir-clip
Part #
Style
Mount
Holes
Finish
ATT SL-40SS-P3-7
Flat
Ball 10mm
2
S/S
ATT SL-46SS-P3-7
90
0
Ball 10mm
5
S/S
ATT SL-46SS-P3R-1
90
0
Rev Ball
5
S/S
ATT SL-50SS-P3-7
900
Ball 10mm
2
S/S
ATT SL-58SS-P3-7
90
0
Ball 10mm
2
S/S
ATT SL-62SS-BS-1
Flat
Ball 13mm
4
S/S
ATT SL-69SS-BS-1
Stud*
Ball 10mm
-
S/S
*9/16" Shank Length
Choice of Pem Attachment Points and Finish
SpringLift mounting brackets are available with
Blade Pem or Ball rem gas spring attachment
points and a choice of materials and nishes,
including zinc plated steel with black painted
nish or stainless steel.
Packaging Options
Parts ending in -7 are retail packaged by the pair
Parts ending in -5 are retail packaged by the each
Parts ending in -1 are sold in Bulk
*Requires a 13mm ball # ATT SL-62SS-BS-1
Part #
Part #
Socket End
EXTERIOR HARDWARE
Length
Open-Closed
Length
Open-Closed
282
Hatch Adjusters
TH Marine Lid & Hatch Support
Lamp Stainless Steel Flap Stays
A 5/8" diameter, 12" long spring
that requires four #8 FH screws
for mounting. Designed to support 20lbs.
maximum. It includes an internal S/S cable to
prevent over extension on heavy lids.
• Satin nish 18-8 S/S
• Requires 4 #8 FH fasteners
LMP HS-180
LMP HS-210
8-17/16"
9-29/64"
THM HS-1C-DP
Lamp Stainless Spring Loaded
Lid Stays
Perko Windshield Adjuster
• Self opening and closing
• Satin nish 18-8 S/S
Part #
EXTERIOR HARDWARE
Length Open
Closed
LMP LK-222
8-47/64"
6-25/32"
LMP LK-380
14-31/32"
11-1/32"
Chrome plated zinc. Black plastic knob. Sold in pairs.
• Length: 12"
• Adjustment: 9-1/2"
• Knob diameter: 1-3/4"
• Uses #8 fastener
PER 1290-DP-CHR Side mount
Sea-Dog Hatch Adjusters
Perko Hatch Adjuster
Chrome plated brass and zinc. Black plastic knob.
• Arm length: 10"
• Adjustment: 9-1/2"
• Slide length: 10"
• Stamped S/S and nylon construction
• With easy grip locking sleeve
Part #
PER 797-DP-CHR
A
B
C
D
SED 321295-1
11-15/16"
17-7/8"
1-3/8"
1-3/16"
Perko Windshield Adjusters
SED 321296-1
14-15/16"
24"
1-3/8"
1-3/16"
Chrome plated brass and zinc. Black
plastic knob.
Sea-Dog Side Vent Adjuster
PER 1116-DP1-CHR
PER 1116-DP2-CHR
PER 1117-DP-BLK
8"
10"
Spare knob for 1116,1179,1180
Perko Windshield Adjusters
Injection molded nylon push nut retainer nut
with washer, stainless steel pin.
•
•
•
•
SED 324380-1
Black plastic knob
Chrome plated brass and zinc
Outside tube diameter: 1/2"
Uses #6 fastener
Part #
Sea-Dog Hatch Adjusters
Closed
Open
PER 1179-DP1-CHR
10"
18"
PER 1179-DP2-CHR
12"
20"
Perko Windshield Adjuster
• Stamped S/S and nylon construction
• With nylon locking nut
A
B
C
D
SED 321291-1
Part #
11-1/8"
17-7/8"
1-3/8"
1-3/16"
SED 321292-1
14-3/16"
24-3/16"
1-3/8"
1-3/16"
Chrome plated brass and zinc. Black plastic knob.
• Outside tube diameter: 1/2"
• Length closed: 12"
• Length open: 21"
PER 1180-DP-CHR
Hatch Adjusters
Perko Hatch Support Braces
• Sold in pairs
PER 762-DP2-CHR
PER 762-DP3-CHR
283
Sea-Dog Hatch Spring
• Formed and stamped 304 S/S
• Fastener: #6 RH or 1/8" pop rivet
• L: 9"
12"
14"
SED 321660-1
Sea-Dog Windshield Brace Kit
SED 324310-1
SED 321670-1
Sea-Dog Hatch Springs
Formed and stamped 304 S/S. An internal wire prevents the
spring from being over extended.
• Fastener: #10 RH or 3/16" Pop rivet
• L: 8-5/8"
SED 321650
SED 321650-1
Bulk
Packaged
Formed 304 S/S, heavy duty spring that
is ideal for larger hatches and dock boxes.
Strong stainless steel spring with internal safety cable that prevents
spring from being overextended during normal use. Heavy duty
molded nylon pads on both ends.
SED 321680-1
Notes
EXTERIOR HARDWARE
Formed aluminum & injected molded
nylon construction. Includes two
windshield brace feet and a 14-1/4”
length of tube to be cut to size.
Formed and stamped 304 S/S. An internal wire
prevents the spring from being over extended.
• Fastener: #10 RH
• L: 10-1/8"
TACO RUB RAIL KIT
!
NEW
TACO MAKES RUB RAIL
REPLACEMENT EASY…
• Flexible vinyl and semi rigid rub rail kits
• New semi-rigid rub rail kit w/flexible vinyl chrome insert Enjoy the elegant look of stainless steel at a fraction of the cost
• Everything needed in one convenient box
• New easy-carry box
O
C
TA
P
O
T-T
BOAT OWNERS CAN NOW HAVE…
an anodized aluminum T-top with the look,
strength and durability of a factory-installed top
that assembles and installs without welding.
TA
CO
M
• Adjustable design fits most boats and consoles (up to 41"W)
• Accessory-ReadyTM T-top ring allows for easy installation &
removal of acessories
• Outrigger-Ready designed for
10-minute installation of
Grand Slam 270 Outrigger mounts
• Adjustable, removable canvas
available in choice of colors
• Ships and stores in flat
UPS-compliant boxes
AR
IN
BUILD IT TO LAST…
E
LU
M
BE
R
• UV stabilized polymer sheet
• Excellent resistance to sun and saltwater
• Won’t rot, delaminate or splinter
• Matte texture eliminates painting
• No special tools required: cuts, routes
and shapes like wood
TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine
ne.com
285
Rub Rails / Molding
Sea-Dog Rub Strakes
TACO Half Oval
• Anodized aluminum
• Hole size: #6
• Length: 12'
Stamped 304 stainless steel, highly polished. Use #8 FH screws.
Part #
A
B
C
D
8"
5"
N/A
1/4"
3/4"
SED 055412-1
12"
4-1/2"
4-1/2"
1/4"
3/4"
SED 055418-1
18"
7-1/2"
7-1/2"
1/4"
3/4"
SED 055424-1
12"
7-1/16"
7-1/16"
1/4"
3/4"
A510104TAL12D
TACO Exterior Gutter
Stainless steel type 304. Highly polished.
• 1" H x 1/4" W x 24" L
TACO Universal Aluminum Trim
•
•
•
•
TAC S11-1800P24
TACO Rub Rail Ends
Stainless steel type 304. Highly polished. 3/4" ts S11-4510P12 and
1" ts the S11-4650P12.
• 1/4" W x 12" L
3/4"
1"
Anodized aluminum
5/8"H x 1/4"W
Hole size: #5
Length: 12'
TAC A500273TAL12D
TACO Transom Edge
• Hole size: #5
• Length: 12'
TAC A500326TAL12D
TAC A500328TAL12D
TACO Stainless Steel Rub Rail
Hollow back, half oval, type 304 marine
grade stainless steel. Drilled and
countersunk on 6" Centres.
• Length: 12'
A500326TAL12D
Height
Gauge
Fastener
TAC S11-4500P12
1/2"
.062"
#6
TAC S11-4511P12
3/4"
.077"
#8
TAC S11-4650P12
1"
.077"
#10
TAC S11-4670P12
1-1/4"
.077"
#10
A500328TAL12D
TACO T Hatch Trim Molding
• Length: 12'
TAC A500304TAL12
TAC A500375VEL12
TACO Stainless Steel Rub Rail
Solid back, half oval, type 304 marine grade
stainless steel. Drilled and countersunk on 6"
centres.
• Length: 12'
Part #
EXTERIOR HARDWARE
• Hole size: #6
• Length: 12'
TAC A510149TAL12D
TACO Stainless Steel Rub Strake
Part #
A510102TAL12D
E
SED 055408-1
TAC S11-2000P12
TAC S11-2001P12
TAC A510102TAL12D
TAC A510104TAL12D
A500375VEL12
A500304TAL12
A
B
Fastener
TAC S11-450SP12
1/2"
5/32"
#6
TAC S11-467SP12
1-1/4"
1/4"
#12
TACO Molding
• Hole size: #8
• Length: 12'
TAC A110151TAL12D
TAC A110152TAL12D
A110151TAL12D
A110152TAL12D
286
Rub Rail / Moldings
TACO Aluminum Rub Rail
• Length: 12'
Colortrym Hatch Moldings
•
•
•
•
TAC A120303BLY12D
TAC A120305BLY12D
Anodized aluminum
Use for hatch cover trim
Not drilled
Length: 12'
CTM 7365
CTM 7395
Insert:
TAC V120303BKA Black
• Sold by the foot
EXTERIOR HARDWARE
• Anodized nish
• Length: 12'
TAC A110317TAL12D
Colortrym Gutters
• Bottom lip to cover raw edge of
breglass
• Countersunk for # 6 fastener on 6"
centres
• Length: 12'
Insert:
CTM 1880BDMAC
• Anodized nish
• Uses #8 fasteners
• Length: 12'
Colortrym Utility Edging
• Countersunk for #6 fastener on 6"
centres
• Length: 12'
TAC A110347BLY12D
Insert:
CTM 1937BMAC
Colortrym Edge Facings
• Length: 12'
• Countersunk for #4 fasteners on
6" centres
• Length: 12'
TAC A110342BLY12D
Insert:
TAC V120342BKA
Black
CTM TM19 BA
CTM 3938 BMAC
3938 BMAC
• Length: 12'
Colortrym Screw-on Ovals
• Countersunk for #6 fastener
on 6" centres
• Length: 12'
TAC A110638TAL12D
Insert:
TAC V120338BKA
TM-19BA
Black
CTM 1010BMAC
CTM 1666BMAC
TACO Rub Rails
287
TACO's vinyl extrusions incorporate prime virgin resins,
U.V. inhibitors, plasticizers, fungicides, impact modi ers and other
additives to ensure outstanding weatherability and performance.
RUB RAIL SELECTION TIPS
Here is how to get started:
MEASURING YOUR BOAT
1. Measure the length and beam
2. Add them together and multiply by two
3. This is the minimum length of rub rail required for your boat
TACO D.I.Y. Rub Rail Kits
•
•
•
•
Kits include:
Flexible vinyl rub rail
Insert
End caps (where applicable)
Screws, & installation guide
TACO Flexible Rub Rail Kit
Complete with:
• 50' Black exible rub rail (V11-0809BKA50)
• 50' White insert (V12-0810WHA100)
• 2 ea. End caps (F90-0750BN)
• 100 ea. Stainless steel screws
TAC V110809BWK502
Complete with:
• 50' Black exible rub rail (V11-3447BKA)
• 50' White insert (V12-0003WHA50).
• 2 ea. End caps (F90-0002BKN)
TAC V113447BWK502
Complete with:
• 50' Black exible rub rail
(V11-3426BKA50)
• 50' Black insert (V12-0005BKA50)
TAC V113426BBK502
Complete with:
• 50' Black exible rub rail
(V11-0809BKA50)
• 50' Black insert (V12-0003BKA50)
TAC V112423BBK502
TACO Semi-Rigid Vinyl Kit
Complete with:
• 50’ rub rail (V11-9795)
• 50’ insert (V12-4144)
• End caps, screws and installation guide
• Hard durometer creates rigid-like look
• Continuous coil allows for one piece installation without seams
• Tight radius bending can be made with little or no heating
TAC V119795BBK50D2
EXTERIOR HARDWARE
RUB RAIL SELECTION
• You can replace your rub rail with a factory replacement style or a completely different look. Regardless of the material originally
installed by the builder of your boat, feel free to choose the material and style you desire
• It is easier to install if you remember to choose a rub rail that is at least the same height as the original
• Flexible vinyl rub rail is the easiest to bend and provides a cushioning effect when in use against normal bumps
• Rigid vinyl and aluminum rub rail with exible vinyl inserts, last long and are easy to install in straight runs
• Rigid vinyl rub rail with stainless steel overlap provides the best protection and the longest useful life
288
TACO Rub Rails
TACO Semi-Rigid Rub Rails
• Offers the appearance and durability of rigid rub rails with the
formability of exible rub rails
• Tight radius bending can be made with minimal heating
• Continuous coils for one-piece installation without seams
TAC V110809BKA
Molding, black
Sold by the foot (50 foot lengths)
EXTERIOR HARDWARE
Inserts:
TAC V120810BKA
TAC V120810WHA
Black
White
TAC V113447BKA
Molding, black
Insert:
TAC V120003BKA
Black
End Cap:
TAC F900002BKN
Black, each
TACO Rigid Vinyl Rub Rails
w/ Stainless Insert
• Rigid vinyl rub rail with stainless
steel insert provides the ultimate in
durability and elegance
• Ideal for 20 to 40 foot boats
TAC V219613BKA20D
Black, 20'
Insert:
TAC S11-4511P12
S/S, 12'
TAC V219659BKA20D
Black, 20'
Insert:
TAC S11-4511P12
S/S, 12'
TACO Rigid Vinyl Rub Rail
w/ Flexible Insert
TAC V113426BKA
Molding, black
Insert:
TAC V120005BKA
End Cap:
TAC F900001BKN
Black
Black, each
• Colour and gloss levels matched
to gel coats
• Requires heat for radius forming
• Cuts and drills like wood
• Ideal for boats up to 25'
TAC V219501WHC20D
White, 20'
Insert:
TAC V120303BKA
Black, per foot
TACO Rigid Vinyl Rub Rail
TAC V112423BKA
Molding, black
Insert:
TAC V120003BKA
Black
End Cap:
TAC F900001BKN
Black, each
•
•
•
•
Designed for use without an insert
Provides good basic protection
Ideal for work boats
Sold as a straight length or
coiled in a box
20 foot lengths
TAC V213670BKA20
TAC V213670BKA20D
TAC V213670WHA20D
Black length
Black coiled
White coiled
End Cap:
TAC F900001BKN
Black, each
TACO Work Boat Vinyl Rub Rail
TAC V110899BKA
Molding
TAC V110899BKA100
Molding
Sold by the 100 foot length
Insert:
TAC V120005BKA
Black
• Heavy duty work boat rub rail
• White in colour
20 foot lengths
TAC V210945WHA20
Vinyl Trim / Weather Seal
TACO Flexible Vinyl Trim
StanPro Edge Channel
Covers the un nished edge and follows any
contour or radius. Flexible PVC trim with
individual internal aluminum clips and gripping
tongue. 25' lengths.
Stainless steel edge channel seals the
opening between two windows of 3/16" or
1/4" thickness.
• Each length is 8' long
Trim 5/16" x 9/16"
Black
TAC V30-1005W25-1
Trim 5/16" x 9/16"
White
TAC V30-1008B25-1
Trim 1/4" x 1/2"
Black
TAC V30-1008W25-1
Trim 1/4" x 1/2"
White
TAC V30-1312B25-1
Trim 3/8" x 5/8"
Black
TAC V30-1312W25-1
Trim 3/8" x 5/8"
White
TAC V30-1316B25-1
Trim 1/2" x 19/32"
Black
TAC V30-1316W25-1
Trim 1/2" x 19/32"
White
STP 75000081
LifeSafe Hatch Tape
For bedding in windows and deck
ttings. Also used as an anti-vibration
and water seal for engine hatch covers,
etc.
• 3/4” x 7 feet
LIF RE-3870
StanPro Marine Quickedge Plastic Trim
Permastik Foam Gasket
Designed to trim un nished edges of boats, such as inwales or
coamings, grommets, edges of hatches and other exposed breglass
or metal edges. It is designed for fast and permanent installation,
without adhesives, on anges from 1/8" to 3/16" thick with a 3/4"
minimum radius and with minimum clearance from the edge of
1/2".
STP 75000330
STP 75000334
STP 75000346
STP 75000348
White, Steel insert
Black, Steel insert
White, Aluminum insert
Black, Aluminum insert
StanPro Stainless Steel Sliding Window Channel
A premium quality closed-cell neoprene gasket. Excellent
resistance to weather and moisture absorption, oil and grease
resistant. Adhesive coated 1 mil Mylar backing which prevents
stretching during application with subsequent creeping and
weakening of bond.
GSK CG5351/4x1/2
GSK CG5351/4x3/4
GSK CG5353/8x3/4
GSK CG5351/2x3/4
GSK CG5351/2x1.5
TACO Weather Seal
Weather Seal is made of durable exible
sponge rubber with a heavy duty selfadhesive backing. Use Weather Seal
or Hatch Tape anywhere you need a
weather tight compartment.
Weather seal-sponge rubber
TAC V30-0109B10-1
TAC V30-0202B10-1
TAC V30-1333B10-1
Designed speci cally for marine use and made of nonmagnetic
type 316 stainless steel. The glass slides easily on a heavy plastic
strip over a felt cushion, which permits installation screws to be
countersunk for proper clearance. The polypropylene pile fabric
will not rot or mildew, is UV stabilized and moth proof. Each
length is 8'.
STP 75000118
STP 75000119
STP 75000120
Single exible
Single rigid
Double rigid
50' roll
50' roll
25' roll
25' roll
25' roll
3/8"H x 5/8"W x 10'
1/2"H x 1/2"W x 10'
1/4"H x 3/8"W x 10'
Hatch Seal- medium density closed cell foam
TAC V30-0744B8-2
TAC V30-0748B8-2
1/8"H x 3/4"W x 8'
1/4"H x 3/4"W x 8'
EXTERIOR HARDWARE
TAC V30-1005B25-1
289
290
Marine Cork / Starboard
Stazo Marine Cork Marinedeck 2000 Exterior
The result of advanced research and technology in synthetic
marine ooring. The composition, being made of ACMEC
(Agglomerated Composite Marinedeck Exterior Composition).
ACMEC is a registered trade mark and being manufactured by
STAZO marine equipment.
A very special production method together with the synthetic
binder enables us to manufacture MARINEDECK 2000
EXTERIOR. The planks, primers, adhesive and deck caulking
material being prescribed, incorporate the same component
elements to ensure complete compatibility.
EXTERIOR HARDWARE
The nished product has proven to exceed expectations,
resisting exposure to natural elements and most chemicals.
MARINEDECK 2000 has stood the test of time in most
extreme conditions, proving wear resistant and nearly
maintenance free.
Standard deck plank
STZ 032.1000.9
2" x 3/8" x 75"
Narrow deck plank
STZ 032.1000.8
1-1/2" x 3/8" x 75"
Margin deck plank
STZ 032.1000.0
3" x 3/8" x 75"
King / shing plank
STZ 032.1001.1
5" x 3/8" x 75"
Sea water resistance
Tested for sea water resistance
including extended periods with
continuously changing temperatures,
immersed in sea water with a very high
salt content.
UV resistance
Tested in both practice and in climate
rooms.
All weather resistance
Proven not to be effected by
temperatures from -40 to +45C0
Strong and exible
Bounces back after a short while if
abused and can be easily repaired.
Maintenance
Simply wash when dirty with a normal
household cleaner. Cleaning also
prevents dirt from accumulating.
The weight of one m2 MARINEDECK 2000 EXTERIOR is approx.
5.5kg without adhesive, caulking material and top coat. The nished
weight per m2 including all materials is approx. 6.5kg
Deck plank
STZ 032.1001.2
16" x 3/8" x 75"
Accessories:
STZ SSONE290
STZ SP9102
STZ SPMAR
STZ 032.0510.9
290 ml, adhesive/sealant, black
1000 ml, primer, breglass & metals
500 ml, marine primer, wood
Litre binder, brown, 2 component
TACO StarBoard Lumber Sheets
Marine Lumber will not rot, de-laminate, swell or splinter, and the matte texture requires
no painting, nishing or maintenance. It can be easily cut, routed, shaped and drilled with
standard woodworking tools.
TAC P102512WHA27
1/4" x 12" x 27"
White
TAC P102524WHA27
1/4" x 24" x 27"
White
TAC P105012BLK27
1/2" x 12" x 27"
Black
TAC P105012WHA27
1/2" x 12" x 27"
White
TAC P105024WHA27
1/2" x 24" x 27"
White
TAC P105024WHA54
1/2" x 24" x 54"
White
TACP107524WHA54
3/4" x 24" x 54"
White
Project Ideas:
• Bait boards • Sink covers • Trim
• Tables • Counter tops
• Back splash • Transom door
• Instrument panels
• Ladder treads • Hatches & doors

exterior hardware

Transcription

Similar documents

Stemware - Tableware Solutions

Rub Rail Selection Guide

Access Hatch

automotive

tubes - Starco

high-pressure accessories catalogue