ucrete - ALLSEAL Pty Ltd.

BASF Construction Chemicals Australia Pty Ltd
Sydney
Head Office & Export
®
UCRETE Polyurethane Concrete Floors
The Ultimate in
High Performance Flooring
Widely regarded as some of the toughest and most versatile
flooring solutions available today, the high performance
UCRETE® flooring range from BASF Construction Chemicals
delivers the ideal combination of outstanding strength,
superior durability, easy cleaning and attractive appearance.
Initially developed for the food, beverage and pharmaceutical
industries over 30 years ago, UCRETE® floors are resistant to
a wide range of chemicals (including acids, alkalis and
solvents) and provide excellent impact and abrasion
resistance. Its ability to withstand temperature extremes and
repetitive freeze-thaw cycles, not only makes UCRETE® ideal
for use in cool rooms and refrigerated environments, it also
means that it is able to stand up to the punishment of regular
cleaning with steam or boiling water.
UCRETE® meets all requirements for EC directives on food
and plant hygiene, as well as those of US regulatory agencies
- including the USFDA (Food and Drug Administration) and is
available in both smooth and slip-resistant grades, and in a
range of attractive non-tainting colours.
®
UCRETE UD200 is a non-skid, trowel applied product with
outstanding heat and chemical resistant qualities. It is ideal
for use in constantly wet areas in chemical plants, abattoirs,
food processing and/or pharmaceutical plants - providing a
safe, attractive and hard wearing surface that is also easy to
clean and maintain.
UCRETE® WR is a heavy duty, high performance mortar
material that has been developed for use along bund walls
and/or drains.
®
UCRETE MF is a smooth, chemically resistant floor, which
is ideally suited for use in clean rooms, food preparation
areas and pharmaceutical industry applications.
High Performance
Industrial Floors
Melbourne
Ph: (02) 8811 4200
Fax: (02) 8811 3299
Ph: (03) 9567 7300
Fax: (03) 9567 7399
Canberra (agent)
Newcastle
Ph: (02) 6280 6010
Fax: (02) 6280 7220
Ph: (02) 4961 3819
Fax: (02) 4940 8762
Adelaide
Perth
Ph: (08) 8139 7500
Fax: (08) 8139 7599
Ph: (08) 9366 2600
Fax: (08) 9366 2699
Brisbane
Darwin (agent)
Ph: (07) 3633 9900
Fax: (07) 3633 9999
Ph: (08) 8984 3269
Fax: (08) 8947 0504
Mackay
Kalgoorlie
Ph: (0418) 991 567
Fax: (07) 4959 8420
Ph: (0417) 772 355
Fax: (08) 9022 2120
Townsville
Ph: (07) 4774 7344
Fax: (07) 4774 7355
www.basf-cc.com.au
BASF Construction Chemicals New Zealand Ltd
Auckland
Ph:
Fax:
(09) 414 7233
(09) 414 7244
www.basf-cc.co.nz
®
UCRETE DP combines the ultimate in high strength flooring
with a high performance non-slip finish. Specifically
developed for the food and beverage industries, UCRETE®
DP delivers outstanding non-slip performance in both wet
and dry conditions. UCRETE® DP meets the requirements of
both the US and European standards for slip resistant
pedestrian surfaces, as well as those of the Australian
Standard AS/NZS 4586:1999 'Slip Resistance Classification
of New Pedestrian Surface Materials.'
Mastertop
UCRETE
®
A_IndFloors/1/1106
®
High Performance
®
®
Industrial Floors
Mastertop Cementitious Floors
Mastertop Epoxy Floors
BASF’s unsurpassed range of high-performance cementitious,
epoxy and polyurethane industrial flooring products have been
designed to withstand even the toughest environments. From the
Mastertop® range of ‘dry shake’ cementitious surface hardeners
and toppings, and roll-coat clear or coloured epoxy floors, through
to the ‘super tough’ extra heavy-duty UCRETE® range, BASF has
an industrial flooring solution to meet your needs.
Designed for application during construction, BASF's
range of Mastertop® cementitious, dry shake applied,
surface hardeners give added life and durability to
concrete floors.
engineering or fabrication shops. As well as providing a
high level of abrasion and impact resistance, Mastertop®
200 can be coloured to increase light reflectivity and
improve lighting efficiency, or to create an
attractive aesthetic effect.
BASF’s epoxy flooring range incorporates a wide
selection of clear and coloured roll coats, smooth or
non-skid coloured high build floors and epoxy mortar
screeds - high performance solutions to meet the
needs of any type of industrial application.
BASF also manufactures a range of
topping screeds to meet the needs of even
the most demanding industrial and
commercial environments.
In addition to their outstanding performance
characteristics, the fact that many of these products
are available in a wide range of standard colours, and
utilise fillers with common bases, allows the designer
to create a variety of attractive surface textures.
From warehouses to workshops, food processing facilities through
to factories, BASF’s range of high performance industrial floors
deliver quality and performance you can rely on.
Mastertop® 100 is a natural aggregate
surface hardener which has been
specifically developed for use in medium
duty workshop or warehousing operations
environments. Mastertop® 100 can also be
coloured to improve light reflectivity and/or
enhance aesthetic appeal.
®
Mastertop 105 is an abrasion resistant,
dry shake, surface hardener containing
silicon carbide. It is ideal for us in flooring applications
requiring a non-skid texture, such as freezer rooms, food
preparation and wet areas.
Mastertop® 200 is a metallic aggregate dry shake floor
which has been specifically designed for use in heavy
®
®
Mastertop 210 and Mastertop 230 are
applied as a topping screed to prepared
concrete floors, and provide an
outstanding level of abrasion resistance.
Specifically developed to withstand the daily rigours of
heavy mining and earthmoving machinery, Mastertop® 210
and Mastertop® 230 are ideally suited to installations where
tracked vehicles are in use, such as in mine workshops,
waste transfer stations or scrap metal works.
Mastertop® 1050 is a coloured roll coat which is
suitable for use on both floors and walls.
Mastertop® 1080 is a textured, coloured roll coat that
can be applied in a number of profiles. Mastertop®
1080 is also available in a non-skid formulation which
is ideal for commercial and retail applications such as
butcher shops, bakeries and other food preparation
areas.
Mastertop® 1090 is a
clear solvented sealer, that has
been specifically designed for use on
warehouse floors and in processing areas.
Mastertop® 1220 is a 100% solids, high build, nonskid, coloured floor which is suitable for use in food
and beverage processing plants, chemical plants
and/or workshops.
Mastertop® 1230 is a 100% solids, high build,
smooth, coloured floor. Attractive and hard wearing,
Mastertop® 1230 is ideally suited for use in clean
rooms, pharmaceutical factories and warehouses.
Mastertop® 1245 is a high-build, temperature
resistant, trowel applied epoxy mortar which has been
specifically developed for use in heavy duty
applications such as abattoirs, workshops and
manufacturing facilities.