PulseTech

Transcription

PulseTech
CAPABILITIES BRIEFING
Presented by:
Roy Johnson
Sr. Field Support Technician
PulseTech Products Corporation
Founded in 1994,
PulseTech® Products is at
the forefront of researching,
developing and delivering
next-generation battery
testing, maintenance and
charging systems.
Mission Statement: Produce innovative, simple to use battery
enhancing products which always outperform the competition,
improve our customer’s productivity, competitiveness and quality
of life.
PulseTech Background
For the past 18 years, PulseTech has been working with the
US Military to help reduce the consumption of vehicle and
equipment lead-acid batteries.
Kuwait
Afghanistan
PulseTech Performance
What Makes us Different?
PulseTech has a patented high frequency voltage pulsation charging system which has been
scientifically proven to break up naturally occurring sulfation on all types of lead acid batteries,
including flooded, AGM, VRLA, and GEL. This patented Pulse Technology waveform is simply
the most effective method to remove damaging battery sulfation and enhance battery
performance.
The entire charging cycle is controlled by microprocessors that consistently evaluate a batteries
condition to ensure the appropriate amount of charge is being applied.
Our patented pulse waveform has a strictly-controlled rise
time, pulse-width, frequency, amplitude of current and
voltage pulse. Helps all types of lead acid batteries last
much longer and just as importantly accept, store and
release maximum power when needed.
Battery Life Cycle Management
Life Management Cycle
Capability Gap?
Only 1 has battery
Charging capability.
Field Maintenance
Corrective Maintenance Systems
Bench Top 12
Station Charger
Part No: LP-PC12 Rev B
NSN: Pending
12V World Charger
Part No. 746x725
NSN: 6130-01-477-4703
HD Pallet Charger
Part No. 746x820
NSN: 6130-01-532-7711
Redi-Pulse Pro HD
Part No. 746x800
NSN: 6130-01-500-3401
* Standard on SATS
Dual 24V Charger
Part No. 746x840
NSN: 6130-01-609-9818
Battery Service and Equipment Set
Battery Service and Equipment Set (BSES)
Part# 746x100 NSN 5180-01-541-9731
MBT-1
Contains 10 Each
Part No. 741x800
NSN: 6130-01-463-8499
490PT+ Diagnostic Tester
Contains 1 Each
Part No. 741x491
NSN: 6130-01-510-9594
HD Pallet Charger
Contains 1 Each
Part No. 746x820
NSN: 6130-01-532-7711
Redi-Pulse Pro HD
Contains 1 Each
Part No. 746x800
NSN: 6130-01-500-3401
Redi-Pulse Pro-12
Contains 1 Each
Part No. 746x912
NSN: 6130-01-535-2718
The BSES includes its own reusable shipping container, and provides battery diagnostics, preventive
maintenance, and corrective maintenance solutions. It truly allows the Maintenance activity to set up
a battery recovery and recharge operation anywhere in the world in a matter of minutes. It gives the
maintainer instant capability to diagnose and recover batteries on or off the platform.
Corrective Maintenance, Diagnostics & PM
Dual Station 12V charger
Part No. 100x200
Output: 2.5A both terminals
Input Voltage: 100-250 Vac
NSN: 6130-01-458-0984
Redi-Pulse Pro-12
12 Station Battery Maintainer
Part No. 746x912
NSN: 6130-01-535-2718
490PT+
Diagnostic Conductance Tester
Part No. 741x491
NSN: 6130-01-510-9594
*Standard on SATS
MBT-1
Mini Battery Tester
Part No. 741x800
NSN: 6130-01-463-8499
Preventive Maintenance (PM)
24V Solar Pulse Charge Monitor
System (SPCMS)
Part No. 735x687
NSN: 6130-01-558-5371
24V Pulse Charge Monitor System
Part No. 735x643
NSN: 6130-01-497-0964
12V Solar Battery Charger
Part No. 735x305
NSN: 6130-01-446-7154
24V Pulse Solar Charger
Part No. 735x640
NSN: 6130-01-487-0035
12V Pulse Solar Charger
Part No. 735x740
NSN: 6130-01-546-8432
Corrective Maintenance
VS
Mobile Battery Shelter - $67,590
Battery Service Equipment Set - $8,797
Field Maintenance
Field Training
No matter how good the equipment is . . . the ultimate success
will forever be tied to training and command emphasis.
Recent Savings Examples
• KY-NG; after implementing a Battery Maintenance Management Plan (BMMP) have
reduced their lead acid battery consumption by 90%, saving millions annually
Ref: http://www.almc.army.mil/alog/issues/NovDec10/battery_manager.html
• Camp Arifjan Kuwait; A two-man team working in a tent saved the Army more than
$7 million over an 18 month period by charging batteries for re-use.
Ref: http://www.army.mil/article/78581/Hawker_Battery_mission_turns_out_the_l
• 3rd BDE, 4th ID put a battery recharging program in place in 2012. In the first 8 months
they successfully recovered 1522 batteries. This was a Cost savings of over $383,640,
and was done with $16k worth of equipment (2 Pallet and 2 Pro HD chargers). Since this
point they have added more gear and now documented savings over $650k.
• 1st BDE, 25th ID. Implemented a program on Fort Wainwright Alaska in Jan 2013.
Since implementation they have documented savings over $250k.
• The list goes on and on……………you don’t need to spend a bunch of money to see
immediate results. The appropriate level of equipment is based on unit equipment
density, mission, and personnel.
Savings
Contact Information
PulseTech Products Corporation
Contact info:
Roy Johnson
PH: 315-489-8823
[email protected]
Eastern US and International
Tom Pigorsh
PH: 719-331-0329
[email protected]
Western US and USAPAC
Jonathan Lewis
1-800-580-7554 (Ext 156)
[email protected]
Warranty/Technical Assistance
Field Support