ROLLEIFLEX 3,5 F ROLLEIFLEX 2,8 F User Guide

ROLLEIFLEX 3,5 F
ROLLEIFLEX 2,8 F
User Guide
Display of the selected
aperture and time
Exposure meter:
adjust the time and aperture
until the clockhand matches
the needle
Push to flip out
focusing loupe
Push to release
the finder hood
Turn to loosen the
door of the
film chamber
Splitt image focusing
aid. If the image is
aligned, the focus
is set correct
Switch between
bulb and x-sync
Push to release
the finder hood
Pull out for
self timer
Turn to
adjust time
Turn to adjust
aperture
Frame counter
Turn back and
forth to advance
the film to the next
frame and to
cock the shutter
Reminder for
the inserted
type of film
Shutter
release button
Push and pull
to set ASA/DIN
Turn to
adjust focus
Turn to lock
shutter button
Flash connector
Turn clockwise
to advance the film
to the first frame
Pull out to insert an
empty take up spool
from a previously used
120 film
Turn to unlock
the opening latch
wp.ki-online.net 2013
After unlocking
pull down to
open the film
compartment
door
Pull out to insert
the new film
Advance crank until
„start“ appears as
shown in the picture