Temptrol®

Comments

Transcription

Temptrol®
Location:
Temptrol®
Shower System C-96-1-151
Specification Submittal
Feature Highlights
®
■■ Symmons shower system with Temptrol pressure
balancing mixing valve with adjustable stop screw to limit
handle turn.
■■ Senior Institutional Showerhead #4-151 single mode with
semi-adjustable spray
■■ Showerhead spray angle factory set at 30 degrees or optional
15 degrees angle
■■ Spray face is non-clogging and non-removable
■■ All mounting fasteners for the valve and showerhead are
vandal resistant recessed hex socket type
■■ Flow rate 2.5 gpm (9.5 L/min)
Optional lower flow rate restrictor available
■■ Polished chrome finish (standard)
Model Numbers
 C-96-1-151
Options / Modifications
Append appropriate -suffix to model number

-IPS 1/2 inch female IPS connections on
Symmons Temptrol mixing valve

for service,

-CHKS Integral Check Stops.
Temptrol valve includes check stops
(Only available with -X Integral Service Stops)

-REV Reverse core in valve for back-to-back
installations. HOT on the right and COLD
on the left.
(only available with -X Integral Service Stops)
®
Shower System with Temptrol mixing valve
 C-96-1-151-TRM
-X
Shower Trim only, valve must be ordered separately
Handle Options / Modifications
Append appropriate -suffix to model number
-LAM

®
Symmons Temptrol® mixing valve includes
integral service stops to allow water shut-off

-2.0 2.0 (7.6 L/min) flow rate restrictor

-1.5 1.5 (5.7 L/min) flow rate restrictor
-B Chrome brass escutcheon valve


-15 Showerhead spray angle factory set at 15
degrees

-A Anchor plate to simplify mounting of
showerhead on ceramic tile

-BB Back plate and thru bolts for extra thick
walls up to 6 inches.
Specify dimension for thicker Walls:
-LAM Lever handle
Warranty
■■ Limited Lifetime - to the original end purchaser in
consumer installations.
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
■■ 5 years - for commercial installations
Print
Email
Reset Form
Dimensions Temptrol Commercial Shower System, C-96-1-151
2 1/16"
52mm
4 1/2"
114mm
approx.
24"
610mm
shower
discharge
5/8"
16mm
finished wall
7 3/8"
187mm
1/2"
13mm
hot and
cold inlets
adjustment
approx.
48"
1219mm
Note: Dimensions subject to
change without notice.
floor
line
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com ■ Email: c u s t o merservi [email protected] symmons.com
©2008, 2009, 2010 Symmons Industries, Inc. Printed in U.S.A.
■ 082310
1/2"
13mm
2"
51mm
1/2"
13mm

Similar documents

Temptrol®

Temptrol® ■■ Symmons commercial series tub-shower system ■■ Symmons Temptrol pressure balancing mixing valve with adjustable stop screw to limit handle turn. ■■ Showerhead #4-137 single mode, cast brass with...

More information

Temptrol™

Temptrol™ valve includes integral service stops to allow water shut-off for service -IPS 1/2 inch female IPS connections on Symmons Temptrol mixing valve -REV Reverse coring in valve for back to back install...

More information

Specification Sheet - Republic Plumbing Supply Co.

Specification Sheet - Republic Plumbing Supply Co. Finish Options / Modifications Append appropriate -suffix to model number. † -STN Satin nickel - Polished chrome (standard finish)

More information

Museo™ - Symmons

Museo™ - Symmons -REV Reverse coring in valve for back to back installations; hot on right, cold on left, (available with -X integral stops only)

More information