Laverda 750S wiring modification 2

Laverda 750S wiring
modification
Get rid of the leakage currents
Problem
• After one week idle, the battery is half gone
and the bike won’t start
• Leakage current measured was 28.2 mA
with everything switched off. This is far too
much!
• Current is always flowing through coil of
relais 9
Relais 9
Connected to
permanent
+12V
Original
old
Modified
new
•Solder brown-green wire to existing brown-green wire
cut small purple wire and connect to brown-green
Isolate
solder joint
solder joint
Cut purple
wire here
Brown-green wire
(may look red-green)