BR-MIA-UK 2015.indd

HOME AUTOMATION
Fantini Cosmi SpA, established in 1931 by the Fantini family,
is one of the leading manufacturers of electrical, electronic
equipment and systems for controlling and regulating. Fantini
Cosmi, thanks to the long experience in the production of
equipment for climate control and regulation, has a leading
position on the market as a specialist in the production of a
wide range of technologically advanced products that can
be integrated with each other such as home and industrial
automation, heat metering, temperature regulation, air
conditioning and mechanical ventilation. In 2007 Fantini Cosmi
Industrie Group is established as a result of the merger of three
historic and prestigious brands: Fantini Cosmi, Aspira and
Fancos with the aim of having a capillary presence in both the
electrical and plumbing fields. In 2011 Fantini Cosmi despite
the global financial downturn still grows and takes over two
historical brands in the thermoregulation field, T&G and Fancy.
2
MiA - Home automation
INDEX
HOME AUTOMATION
page 4
ABOUT MIA
page 6
Application
page 6
It easily adapts to your home
page 7
How does it work
page 7
Reliability
page 7
SIMPLICITY
page 8
Easy to install
page 8
Easy configuration
page 9
Easy to use
page 10
WHAT I CAN CONTROL
page 11
MIA SOLUTIONS
page 14
Comfort
page 14
Energy saving
page 15
Safety
page 16
ADVANTAGES AND BENEFITS
page 17
SYSTEM COMPONENTS
page 18
INSTALLATION GUIDE
page 27
Technical Manuals
AFTER SALES SERVICE, QUALITY AND TECHNICAL SUPPORT
page 29
page 30
3
Home automation
Close your eyes and imagine living in the house of the future, with a simple gesture you have control of heating, air conditioning,
blinds, lights, appliances and load control of all the internal and external automations of the house. Imagine a smart home that
can be programmed and controlled to suit your needs, with MiA this is possible. MiA is a simple but substantial technological
progress for the management and control of the automation system that will improve the quality of life by simplifying everyday
actions and offering safety and energy savings.
4
MiA - Home automation
MiA is the automation
system suitable for homes
and commercial premises
SicurGAS
5
About MiA
MiA is Fantini Cosmi’s automation system for the management and control of your home that improves the quality of life by
simplifying everyday actions and offering safety and energy savings. Through automation and customizations makes your home or
building safer and comfortable, while allowing you to save energy.
A single gesture allows to: switch off all the lights in the house, close all windows, adjust the room temperature, etc .. It also
provides greater safety of your home while controlling gas leakages or other alarms, greatly reducing domestic risks.
Thanks to the innovative user interface with intuitive icons and supervision with its customizable graphical maps you can manage,
interact and control MiA in a simple way, locally or remotely through the internet via Smartphone, Tablet, PC or WebTV.
Application
MiA is flexible and easily expandable. The system is designed to be installed in both new built homes and refurbishment or
upgrading of existing facilities. It can be easily installed even in large sized installations.
6
MiA - Home automation
It easily adapts to your home
MiA system is quick to install and can be placed in all homes.
It is composed of a set of intelligent modules that communicate via BUS and can be
easily incorporated in control cabinets, in junction boxes and roller blinds.
MiA is also compatible with any domestic switch button and with all types of cabling.
MiA fits every civil series
Reliability
MiA system is engineered and designed to last. All elements of the system are equipped with their own intelligence and autonomy,
and the system architecture has been designed to ensure the functioning of the system in case of failure of a single device.
How does it work
MiA simply connects to the LAN / WiFi in your home and becomes easily accessible from the internet. Thanks to the innovative
supervision software you can easily manage your system from your Smartphone, Tablet, WebTV, PC or connected with a common
web link from inside the house through the Wi-Fi network.
21°C
Internet
LAN / WiFi router
Web Server
USB interface
MiA modules
7
Simplicity
Easy to install
Fantini Cosmi offers a complete system consisting of built-in products and
DIN rail installations. Every module can be easily fit into the main electrical
boards or they can be decentralized into the built in electrical boxes.
MiA is perfectly compatible with all domestic series currently in the trade,
with the advantage of leaving the end user the freedom of choose the style
you want in your home.
MiA modules
MiA system is flexible and expandable allowing both simple and large
21°C
installations. It’s made of a set of devices that communicate with each
other by mean of a BUS consisting of 3 common wires with a maximum
length of 2 Km. By controlling up to 254 modules, it allows you to manage
2,032 outlets, 2,286 inputs and 99 temperature zones.
The bus can be built by using different architectural topologies, free, tree or
21°C
star, allowing you to connect all devices by following the typical installation
methods. It doesn’t need a central managing unit allowing the reduction of
installation costs.
The proprietary communication protocol is designed to simplify all the
configurating operations and to make it simple for the installer.
The following modules are available:
 DIN rail mounting modules;
 flush mounting modules;
 wall mounting modules.
All the modules are equipped with extractible terminal blocks.
8
MiA manages up to
2,032 outlets, 2,286 inputs
and 99 temperature zones
MiA - Home automation
Easy configuration
The configuration of MiA can be made via PC using the software MiA-MAKE
and MIA-EDITOR.
MiA-MAKE
The configuration of a system is performed with the software MiA-MAKE available
tion of all
for all PC-Windows platforms. This software allows to define the operation
the modules by coupling inputs and outputs with a few mouse clicks.
MiA-Make is designed to drive even novice users in the realization of large and
bsite:
small sized systems. MiA-MAKE can be downloaded for free from the website:
www.fantinicosmi.it
MiA-EDITOR
MiA-Editor is the software for customization,
configuration and graphics
supervision, thanks to which the end user can manage its home automation system
by its own.
The configuration can be done in a short time thanks to a simple graphical interface
with which it will be easy to recreate the home interiors. The software in fact has
a library of icons and objects ready to use (eg thermostats, room sensors, lights,
blinds, awnings, alarms, etc ..). In this way the installer will only need to place them
directly on the plan or on the photo of the room, thus providing the user a custom
view of his house.
9
Easy to use
MiA is simple to manage and control: the supervision system MiA-SMART allows you to easily interact with your MiA home
automation system simply through Smartphone, Tablet, PC or Web TV.
MiA-SMART
MiA-Smart is a Web Server device that allows the user to interact with his home automation system through the pictures of the
rooms. It is possible to enter the floor plans or photos of the rooms to control and display the chosen environment with a click.
The whole family can manage and control the home automation system.
MiA-Smart has two different display modes: small icons ideal for devices such as Smartphones or graphical maps for devices
such as Tablets or PC. The graphical interface is extremely intuitive and has been designed to allow the user to control the entire
system independently and without the need of studying complicated technical manuals. Scenarios can be created by the users
themselves according to their needs. Fantini Cosmi offers 3 types of web-server for different types of systems: MiA-Smart, MiA
Smart + and MiA-Smart PRO.
Control your home
by Smartphone,
Tablet, WebTV or PC
Wall mount Touch-PC
Wall mount Touch-PC available in different sizes and with different finishing in aluminium and glass which create the perfect
combination between design and functionality. You can have all the information about the status of your system at a glance and
re-create your home environment through a simple touch.
The choice of black glass and aluminium finishing makes Fantini Cosmi Touch-PC to become a nice furniture complement
suiting every style of interior design.
10
MiA - Home automation
What I can control
Ambient temperature
MiA solves the problem of controlling the temperature in your home. Fantini Cosmi thermostats and temperature
probes in the home create an atmosphere of comfort and well-being with substantial energy savings. A large
number of combinations are at your choice: integrated heating and cooling, automatic system control with
alarm signals such has malfunctions of the heating or cooling system or too low ambient temperature.
Scenarios
Thanks to the scenarios you can program the entire system according to your habits, by mean of a unique and
immediate command, a series of actions that would otherwise be operated separately. Through the graphical
interface the users can create scenarios according to their needs, interacting with awnings, blinds, light and
temperature levels. Simple or complex scenarios can be programmed and set by the user to be enable at any
time.
The system involves the construction of two types of scenarios, those executable by the push buttons of the
system and those provided by the supervisory system. The scenarios to be controlled by mean of push buttons
are fixed and they are set by the installer during the first configuration of the system and can not be modified
by the end user. Those made with the supervision system can always be modified by the user at any time.
11
Mechanical ventilation with heat recovery
The mechanical ventilation system with heat recovery when integrated with MiA automatically adjusts the air
flow rate to different environmental conditions and / or to the selected scenarios by ensuring the best comfort.
Lighting
MiA, with a simple gesture, allows you to manage and control all the lighting of the house either automatically
or from anywhere you are through the internet, thus simulating the presence of people in the home or by
operating the automatic shutdown of the lights after an intrusion alarm.
Music
Thanks to media control, MiA allows you to listen to your personal playlist of MP3. With the play - stop - volume
controls it allows you to listen to your favourite songs and personalize your playlist.
Alarms
MiA allows you to control any type of electrical system in your home, greatly reducing domestic risks. Thanks to
specific sensors, the user will be notified in case of gas leakages, smoke, electrical overload, lack of electricity,
flooding etc. Alarm messages can be displayed on the supervision system with graphical icons or alternatively
can be notified by email or text messages.
Home appliances
Simultaneous use of home appliances specially those ones with high power consumption can leave you in the
dark. MiA prevents electrical overloads during the use of several home appliances at the same time: a specific
module will temporarily disconnect, one by one, the home appliances with a preset priority order.
12
MiA - Home automation
IP Cameras
MiA manages IP cameras and allows you to keep under control the access and happening in your home. Through
its LAN / WiFi network you can view camera images directly from MiA-Smart.
Irrigation
MiA also manages the irrigation of gardens and terraces. You can program the starting time on a weekly base
by differentiating the areas of intervention.
Timer
With MiA it is possible to program the activation of different scenarios and any other device connected to the
system. The user has complete freedom of programming it by creating events with daily, weekly and monthly
activations.
Awnings and roller shutters
All the awnings and roller shutters of the house can be operated individually or in groups. MiA allows automatic
closure of electric roller shutters and awnings in case of rain or strong wind. Awnings and roller shutters can be
controlled individually or in groups, through push buttons connected to inputs on the bus system.
13
MiA solutions
COMFORT
Fantini Cosmi simplifies and improves the quality of life, creating ideal conditions for living in the house surrounded by comfort
and proposing solutions for every environment
TEMPERATURE CONTROL
MiA solves the problem of controlling cooling and heating of the house. Programmable room thermostats equipped with smart
features and probes to regulate the temperature of the rooms in the home while maintaining ideal comfort.
MECHANICAL VENTILATION
With MiA you can control the mechanical ventilation system by adapting automatically the airflow according to different
environmental conditions and / or the selected scenarios providing better indoor air quality.
SCENARIOS
This function allows you to activate multiple functions with a single command, for example, you can turn off simultaneously all house
lights, set the economy or comfort temperature level , activate the closing or opening of the blinds and shutters, etc..
LIGHTING
With a simple gesture MiA allows you to control the switching on and off of each lamp or luminaries, also adjusting the light
intensity to your wish.
MUSIC
Thanks to MiA-SMART, from a single graphical interface you can play your favourite mp3 tracks, placing them in scenarios or
playing them at fixed times of the day.
HOME APPLIANCES
MiA prevents electric overloads during the multiple use of home appliances. A specific module will temporarily disconnect the
home appliances according to the set priorities.
14
MiA - Home automation
ENERGY SAVING
The installation of MiA home automation can bring significant reductions in energy consumption, avoiding energy waste and
reducing the related costs.
TEMPERATURE CONTROL
MiA ensures significant energy savings due to the shutdown, power-programmed heating and ability to adjust the temperature to
suit your needs.
MECHANICAL VENTILATION
With MiA you can program and fully control the switching ON / OFF of your ventilation system avoiding energy waste when not
needed.
TIMER
This feature allows you to program in a simple way everyday those actions that are performed more frequently, like for example
turning off the lights when not needed.
IRRIGATION
MiA controls the irrigation system of the garden and terraces, in case of rain it will disable the system avoiding unnecessary waste
of water.
15
SAFETY
With MiA the house is safe and protected thanks to the remote control system, messages sending in case of faults or alarms
to keep you always in contact with your house no matter where you are.
ALARMS
MiA allows you to control all types of home alarms thanks to specific sensors and by sending emails and text messages. You will be
notified on your smartphone in case of gas leakages, smoke, electrical overload, lack of electricity and flooding.
IP CAMERAS
Thanks to the LAN / Wi-Fi at home, MiA allows you to view IP cameras on your Smartphone. You can live monitor what happens
inside and outside your home. With MiA the house is always safe and secure.
ROLLER SHUTTERS AND AWNINGS AUTOMATION
All external doors and roller shutters can be operated individually or in groups and can be connected to wind and rain sensors that
will automatically close the blinds and roller shutters in case of strong wind or rain avoiding failures or dangers.
16
MiA - Home automation
Advantages and benefits
MiA home automation system helps to improve comfort conditions and contributes to real energy savings, in total safety and
compliance to the existing regulations.
Easy installation
A PC program with a simple and intuitive interface allows to configure the modules with a few mouse clicks.
Easy configuration
The simplicity und user friendliness of the configuration software makes it easy to learn with a significant reduction of installers’
training time.
High reliability
Thanks to the fact that no central units are needed and power supplies can be connected in parallel the system is less vulnerable
to failures.
Multi-connectivity
With MiA you can easily manage your system from a PC, WebTV, Tablet and Smartphone.
Universal application
MiA fits every wiring device.
Energy saving
The installation of a MiA home automation system optimizes energy consumption and reduces waste of energy for lighting,
heating, etc..
17
System components
Modules with 9 inputs and with 8 outputs with 6A relay
 ODD98 is a module designed for low power applications where many relays are required in a small space.
 The inputs can be connected to the push buttons or technical alarms.
 The outputs are normally open and are ideal for controlling small resistive loads or slightly inductive as solenoid
valves, motors for shutters and contactors.
 To control lighting it is necessary to interpose contactors with adequate power. The relays are rated 6A max with
power factor cosφ = 1 and have a common pole every 4 contacts with a range of up to 12A
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD98
9 digital
8 relays (230Vca - 6A – cosφ 1)
24Vcc - 120mA
DIN rail 4 modules
Module with 8 outputs with 12A relays and auxiliary push buttons
12 11
9 8
6 5
13 14
16 17
19 20
3 2 1
22 23





ODD08 has 8 relay outputs and it is designed to control groups of lamps, electric motors and appliances.
On the front panel there are 8 push buttons for outputs activation.
Due to its small size, only 5 DIN modules, it can be easily installed in any switchboard.
The output contacts are normally open without common pole and are suitable to control resistive loads up to 12A.
Every single relay stands up to 120A peak and requires no external contactors for lighting control.
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD08
-
8 relays (230Vca - 12A - AC1)
24Vcc - 180mA
DIN rail 5 modules
25 26
Module with 8 inputs
 ODD80 can be used to connect the push buttons in the vicinity of the electrical panel or technical alarms such
as: gas sensors, flood sensors, signals from security system.
 ODD80 is the ideal solution for managing bathroom alarms in any hotel.
18
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD80
8 digital
-
24Vcc - 180mA
DIN rail 4 modules
MiA - Home automation
Module with 5 digital inputs and 3 outputs with 16A relay and 2 outputs with 6A relay
 ODD532 has 5 inputs for the connection of the push buttons or contacts for technical alarms.
 It has 3 outputs 16A (of which 2 with exchange contact) suitable for lighting systems and 2 outputs for 6A low
power loads as solenoid valves, motors for roller shutters and contactors
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
ODD532
5 digital
3 relays (230Vca 16A) - 2 relays (230Vca 6A) 24Vdc - 200mA
MOUNTING
DIN rail 4 modules
Module with 5 digital inputs and 3 outputs
with 16A relay and 2 outputs with 6A relay, low profile
 ODD532R has 5 inputs for the connection of the push buttons or contacts for technical alarms.
 It has 3 outputs with 16A relay (of which two with exchange contact) suitable for lighting systems and two
outputs for low power loads 6A as solenoid valves, motors for roller shutters and contactors.
 The module has a low profile which makes it suitable for installation in built-in junction boxes.
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
ODD532R
5 digital
3 relays (230Vca -16A) - 2 relays (230Vca - 6A) 24Vdc - 200mA
MOUNTING
DIN rail 4 modules
75 x 100 x 45 mm
Module with 0-10V control for lighting dimmer
 ODA02 is an extremely compact module with 2 outputs 0-10 V suitable to control up to 2 independent lighting
dimmers.
 It can be configured to use a relay output on the bus to interrupt the phase of the illuminating body when the
brightness level is lower than the cut-off threshold.
 It is suitable for installation in control panels or false-ceilings.
3 2 1
dimmer
esterno
0-10V
dimmer
esterno
0-10V
4 5 6
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODA02
-
2 outputs 0÷10V (max 4mA)
24Vcc - 45mA
DIN rail 1 module
19
Module with OR logic for circulation pump




Module with OR logic function to control the circulation pump in the heating system when opening the zone valve.
The control is performed by monitoring the relay outputs status connected to the valves.
The start of the pump is driving a relay output on the BUS.
Suitable to control up to 8 outputs of 32 different modules, allowing to control up to 256 valves.
COD.
INPUTS
FUNCTION
POWER SUPPLY
BY BUS
MOUNTING
ODDOR
BUS
OR logic
24Vcc - 45mA
DIN rail 1 module
Module with 4 inputs and 8 virtual modules
 ODD40 is used to connect up to 4 push buttons in the built-in or wall mounted boxes.
 It allows to control up to 12 virtual push buttons by detecting the pressure level on the switch (rapid, prolonged
and double click.
 Every input including the virtual ones can be configured as multiple command capable of operating in sequence
up to 12 devices or 12 zones.
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD40
4 digital (and 8 virtual)
-
24Vcc - 18mA
flush mounting, 42 x 40 x 13 mm
Module with 5 inputs and 4 outputs 24Vdc
 ODD54 represents the highest degree of miniaturization of electronic devices in the automation field.
 Thanks to its mall size it is suitable for any flush / surface mounting switches
 It has outputs for connecting directly to the warning lights 24 Volt (max 45mA).
20
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD54
5 digital
4 (24Vcc - 50mA)
24Vcc - 20mA
flush mounting, 42 x 31 x 10 mm
MiA - Home automation
Module for wind, sun and rain detection
 ODAMETEO detects the wind speed, the outdoor brightness and rain.
 When the set threshold is exceeded, for example in the case of strong wind or rain, the module will close the
blinds. When the sun rises or sets the light sensor will automatically open / close the awnings and turn on /
off the lights of the garden.
 The module does not have own outputs and controls the awnings by mean of remote relays present on the bus.
 It is suitable for installation into built-in or surface boxes and it’s equipped with sun, wind and rain sensors.
COD.
INPUTS
POWER SUPPLY
BY BUS
ODAMETEO
digital, sun, wind and rain sensors
24Vcc - 180mA
1582021
wind sensor
1582022
sun and wind sensor
1582023
rain sensor
MOUNTING
DIN rail 4 modules
75 x 100 x 45 mm
Module for electrical overload control
3 2 1
 ODA10C automatically disconnects those home appliances that could cause the electrical overload when run
at the same time.
 ODA10C is ideal for the management of single-phase electrical loads up to 10 kW with cosφ = 1.
 The measurement is done by mean of an internal transformer
 Three-phase can be managed by using 3 modules.
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODA10C
1 (40A internal transformer)
-
24Vcc - 20mA
DIN rail 2 modules
Module with 5 inputs and 2 relay outputs 8A for roller shutters control
 ODD52T has 5 digital inputs and 2 relay outputs suitable to control roller shutters and awnings.
 Thanks to its small size it can be installed into junction boxes or directly in the shutters’ box.
 The output contacts are normally open with common pole and are suitable for controlling electric motors up
to 250 W.
 The electronic and electromechanical interlock prevents the simultaneous activation of the outputs.
M
230 Vac
N
L
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD52T
5 digital
2 relays (230Vca – 250W max)
24Vcc - 30mA
flush mounting, 50 x 72 x 20 mm
21
Roller shutters automation KIT
 Ready to install KIT for the automation of up to 5 roller shutters and expandable up to 9.
 The devices in the KIT do not require any configuration and allow the opening and closing of the shutters
individually or altogether.
COD.
COMPONENTS
POWER SUPPLY
ODK01T
1 power source 24Vcc 300mA
5 modules ODD52T
power source: 230Vca 50Hz 10W
modules: 24Vcc 30mA each
ODK02E
expansion 2 modules ODD52T
modules: 24Vcc 30mA each
Module with 5 inputs and 2 relay outputs 8A for venetian blinds
 ODD52V can be used to control blinds thanks to its 5 inputs and 2 relay outputs.
 Thanks to its small size it can be installed in the junction boxes or directly in the shutters’ box.
 The output contacts are normally open with common pole and are suitable for controlling electric motors up
to 250 W.
 The electronic and electromechanical interlock prevents the simultaneous activation of the outputs.
M
230 Vac
N
L
22
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
MOUNTING
ODD52V
5 digital
2 relays (230Vca – 250W max)
24Vcc - 30mA
flush mounting
MiA - Home automation
Weekly programmable room thermostat with external humidistat
3
2
1
 CH150MB has an attractive design and thanks to its large display and rotary sliders it allows to set the desired
climatic comfort in an easy and intuitive way.
 It is equipped with a humidity sensor that communicates the ambient humidity value to the thermostat and
allows to control a dehumidifier to optimize the comfort.
 CH150MB is suitable for floor heating systems, radiators and fan-coils.
 Hydraulic circuits control is made through a remote relay output module of Mia-Bus system.
 Wall mounting, dimensions 165 x 90 x 21mm.
COD.
COLOR
TEMPERATURE
RANGE
POWER SUPPLY
BY BUS
CH150MB
keys
white
2 ÷ 40 °C with increase of 0,1 °C
24Vcc 50mA
CH151MB
keys
silver
2 ÷ 40 °C with increase of 0,1 °C
24Vcc 50mA
CH152MB
keys
anthracite
2 ÷ 40 °C with increase of 0,1 °C
24Vcc 50mA
CH150TSMB
touchscreen
white
2 ÷ 40 °C with increase of 0,1 °C
24Vcc 50mA
Built-in weekly programmable room thermostat
 CH143MB has an attractive design suitable for 3-module built in boxes.
 The setting of the desired temperature can be made by mean of the buttons on the front and the interactive
backlit display.
 CH143MB can control floor heating systems, radiators and fan-coils.
 Hydraulic circuits control is made through a remote relay output module of Mia-Bus system
3
2
1
COD.
COLOR
TEMPERATURE
RANGE
POWER SUPPLY
BY BUS
CH143MB
white, silver or anthracite
2 ÷ 40 °C with increase of 0,1 °C
24Vcc 50mA
Fan-coils modules
 ODD55F is suitable to control 3-speed fan coils.
 It has three relay for controlling the fan and 2 relays for controlling the valves and the bypass thermostat.
 It has an input for connecting a 10K NTC to control a low-temperature thermostat, an input for detecting the
window status for the automatic shutdown of the fan coil when the window is open, 2 inputs for technical
alarms (such as bathroom alarm) and 1 input for presence sensors to allow the maximum energy savings.
COD.
INPUTS
OUTPUTS
ODD55F
5 digital 1 NTC
3 relays (230Vac - 16A) fan-coil
2 relays (230Vac - 6A) valve
POWER SUPPLY
BY BUS
24Vcc - 200mA
MOUNTING
DIN rail 4 modules
75 x 100 x 45 mm
23
Module for temperature control
 ODD20S allows the temperature control.
 It is equipped with 1 input for ODS T01 temperature sensor connection and controls the zone valves through
the relay outputs on the bus.
 It can control floor heating systems and radiators.
 It has an automatic temperature control function that maintains the set temperature even in case of lack of a
supervisory system.
 Thanks to its compact size it is suitable to be installed in common built-in boxes.
C
B
A
ODST01
COD.
INPUTS
TEMPERATURE
RANGE
POWER SUPPLY
BY BUS
ODD20S
1 digital data (only for ODST01)
5 ÷ 40°C, with increase of 0,5 °C
24Vcc - 8mA
Temperature sensor
 Temperature sensor with 0,5 °C accuracy.
 To be used in combination with ODD20S for home temperature regulation in interiors when the set temperature
is to be changed only through the supervision
 Thanks to the digital operation it allows the most accurate temperature measurements
 The compact size makes it suitable for installation also in holes with 5mm diameter.
C
B
A
ODST01
COD.
INPUTS
OUTPUTS
POWER SUPPLY
BY BUS
ODST01
-
1 digital data (only for ODD20S)
24Vcc - 5mA
Power supply modules
3 2 1
230 Va c
4 5 6
 ODAL2 is the most important part of the system as it provides the 24VDC power supply to all modules of the
system by BUS.
 The module delivers up to 2A current and if necessary it can be connected in parallel to more power supplies.
 The power supply has a resettable overload protection and the status is indicated by LEDs on the front cover as
well as by BUS on the supervision.
 On the front panel RJ11 plug is present to allow data transfer through ODUSB module that by connecting it to
the PC allows the system configuration.
 ODAL1 module, can be used to set simple automations such as the roller shutters.
 ODAL1 is also the spare for the power supply included in the automation shutters KIT ODK01T. It cannot be
used in other applications as it is not supervised and not suitable for connection in parallel with other power
sources of the Bus.
L
N
PE
24
COD.
POWER SUPPLY
OUTPUTS
POWER SUPPLY
BY BUS
ODAL2
230Vca - 50Hz – 60VA
1 MiA-BUS data port (only for ODUSB)
24Vcc - 2A
ODAL1
230Vca - 50Hz – 10VA
-
24Vcc - 0,3A
MiA - Home automation
USB interface
 ODUSB interface connects the system with all the devices that can communicate through a USB port. It is
used for the system configuration through the software “MiA-Make” or for the connection to “MiA-SMART” to
supervise and control the whole system.
 Multiple interfaces can be connected simultaneously to the bus.
1 - TX
2 - L2
3 - L1
BUS
4 - TS
RJ11 plug
 MiA-MAKE can be downloaded for free from the web-site: www.fantinicosmi.it
COD.
DESCRIPTION
INPUTS
OUTPUTS
ODUSB
Flush mounting USB data interface
1 USB data port 1 USB data port
POWER SUPPLY
BY BUS
24Vcc - 20mA
Web supervision, Wi-Fi and internet
 Your MiA Home automation system can be accessed from smartphones, tablets, smart TVs and PCs through a
user friendly web interface.
 The supervision of the system is done using a web-server type device that allows the management of all
functions of the dwelling through the browser of modern smartphones, tablets and PCs.
 Supervision can be done by mean of a WiFi network or via the internet by configuring the xDSL router.
 Fantini Cosmi has 3 types of web-server for different system sizes.
 For the WEB-SERVER configuration the software MIA-EDITOR is required, please refer to the next page.
MIA-SMART
MIA-SMART+
MIA-SMART PRO
Control points
100
Control points
140
Control points
1000
Simultaneously users
3
Simultaneously users
3
Simultaneously users
3
Weekly thermostats
8
Weekly thermostats
12
Weekly thermostats
99
Temperature probes
12
Temperature probes
18
Temperature probes
99
Icons / maps
10
Icons / maps
12
Icons / maps
99
Objects / rooms
24
Objects / rooms
32
Objects / rooms
99
Scenarios
8
Scenarios
12
Scenarios
99
IP snapshot webcams
2
IP snapshot webcams
2
IP snapshot webcams
8
Audio player
•
Audio player
•
Audio player
•
Weekly programmer
•
Weekly programmer
•
Weekly programmer
•
Email sending for each event
•
Email sending for each event
•
Email sending for each event
•
Additional drivers upon request
COD.
SUPERVISION
MODEL
Additional drivers upon request
DIMENSIONS
mm
Additional drivers upon request
POWER SUPPLY
CONSUMPTION
ODHW03
MIA-SMART
130 x 30 x 70
230V 50Hz
10 VA
ODHW02
MIA-SMART+
130 x 30 x 70
230V 50Hz
10 VA
ODHW01
MIA-SMART PRO
170 x 60 x 150
230V 50Hz)
40 VA
25
MIA Editor configuration software
 MiA-Editor is the software necessary to customize and configure MiA-SMART.
COD.
COD
DESCRIPTION
ODKEY
ODK
Configuration software for supervision systems MiA SMART PRO, SMART+ e SMART
Touch-PC
 Elegant Touch-PCs with touch technology available in different sizes and with glass display, tempered black or
anodized aluminium frame.
a
S
Supplied with metal or plastic wall monting box.
CO
COD.
SCREEN FORMAT
PORTS
POWER SUPPLY
FRAME FINISH
OD
ODTS2AL
10 inches 800 x 600
2 USB and 2 RS232
24 Vdc
aluminium
OD
ODTS4AL
15 inches 1024 x 768
2 USB and 2 RS232
24 Vdc
aluminium
ODTS5CR
OD
15 inches 1024 x 768
2 USB and 2 RS232
24 Vdc
crystal
Magnetic supports with charger
 Fantini Cosmi provides different types of support with charger suitable for table and wall installation.
 The table stand allows you to place the device on any horizontal surface allowing use and battery charge at
the same time anywhere in the house. Thanks to its inductive charging system no external battery chargers
are needed.
 The wall bracket can be quickly and easily installed granting an elegant solution suiting every ambient.
 Also available protective covers in white or black fully compatible with both the wall and table charging
systems.
26
COD.
DESCRIPTION
ODIPS1
Wall-mounted support compatible with IPad
ODIPS2
Table-mounted support compatible with IPad
ODIPC1
Black case compatible with IPad2
ODIPC2
White case compatible with IPad2
MiA - Home automation
Installation guide
1
Before installing the devices on the system it is necessary to address them
by mean of a number from 1 to 254. This operation is very important since
it allows the identification of the device on the bus and the link creation
between the different modules that are installed.
230 Va c
To assign the number connect the power supply ODAL2 to the interface
ODUSB as shown in the drawing, then use the software Mia-MAKE to assign
Dispositivo
Product to be addressed
da indirizzare
the address number
230V 50Hz
2
Connect the devices to the system by placing them in the electrical boards
oards
or in junction boxes depending on the desired type of automation (lighting
ghting
control, roller shutters automation, etc ..).
It is important to connect properly the inputs and the outputs to avoid
undesired activations or malfunctions. Proceed as follows:

Never exceed the maximum length of the connecting wires indicated
ed on
the data sheets of each product;

Do not exceed the output load considering that some lighting systems
21°C
like fluorescent and electronic bulbs including led metal halide and
others) have a current peak for a few milliseconds that can be more
than twenty times the normal current absorption. Current peaks can
seriously damage the relay contacts creating malfunctions. In order to
avoid such problems it is important to use devices with power relays
that can withstand current peaks up to 120 amps such as ODD08,
ODD532 and ODD532R.
For a proper device connection a BUS cable is necessary. MiA requires only
a 3-pole cable, Fantini Cosmi recommends the use of type FROR 300/500
(ex. 3 x 0.5 mm²) cables. It is also important to pay attention to the following:

“Star” type
Do not use shielded cables with capacity between individual conductors
greater than 120 pF / m;

The section of every wire must have as characteristics those ones able
to prevent any voltage drop;

The bus can be installed in the desired architecture, tree or star type
21°C
without the need of any termination resistance and avoiding ring
closures;

The maximum allow length of the bus is 2 Km and should include every
derivation.
21°C
“Tree” type
27
3
BUS
Install an adequate number of power supplies in order to grant a proper
power supply to the different devices.
3 2 1
3 2 1
The number of the necessary power supplies can be calculated by counting
the maximum power consumption indicated on the technical specifications
of every device.
230 Va c
230 Va c
The power supplies are ideal to design redundant systems with features of
high reliability, such as the possibility of parallel connection to increase the
4 5 6
4 5 6
current capacity and simultaneously ensure continuity of operation.
A self-diagnostics board allows proper operation and notifies any power
supply fault by bus.
In order to take advantage of all the features mentioned above and properly
install the power supply it is necessary to respect the following indications:

The system must be equipped with at least two power supplies parallel
connected;

The power supply should be installed in electrical boards with proper
ventilation preferably in the lower part, leaving an empty space of 1 DIN
module between them and every other installed equipment;

In case of several power supplies are installed it would be ideal to
install them in different electrical boards to better balance the power
consumption and improve heat dissipation;
4
Proceed with the configuration of MiA system with the software MiAMake
by pairing the different devices. The system layout can be saved as a file
for future reference or modification.
5
Connect MiA-SMART to the local LAN and configure it by mean of the software
MiA-EDITOR. Mia-EDITOR allows to include the house plan and pictures to
create / adapt the supervision according to the end-user’s needs.
6
Once all the previous steps have been completed your MiA home automation
system is ready for use and can be easily managed with your smartphone,
Tablet, PC or WebTV.
28
L
N
PE
230Vac
MiA - Home automation
Technical manuals
Technical manuals, installation manuals and configuration / supervision manuals can be found on our corporate web site.
INSTALLATION GUIDE
MIA-MAKE
CONFIGURATION MANUAL
MIA-EDITOR
CONFIGURATION MANUAL
MIA-SMART
CONFIGURATION MANUAL
29
After sales service, quality and technical support
Choosing Fantini Cosmi products means accurate service, competent and experienced support as well as high quality products.
We are not simply selling a product, we are offering full support from the product choice, the system design, punctual delivery and
an efficient after-sales service. All our systems are engineered and designed to better suit the requirements of the installers and the
end users: simple to install and use.
Fantini Cosmi contacts daily architects, designers and installers offering full support and competent advise in every phase of the
project:

Commercial information;

Technical advice in the design of the project;

Project specification and budgeting.
www.fantinicosmi.com
Tel. +39 02 95682229
[email protected]
30
The features referring to the units described in this catalog are not binding. Fantini Cosmi S.p.A. reserve the right to make
modifications, owing to technological advances and commercial and normative developments, without giving any previous
notice or communication, being it understood that the models’ main functional features will not change.
EXPORT DEPARTMENT PH +39 02 95682229
[email protected]
www.fantinicosmi.com
32
BR-MIA-UK N° 01 2015/02
FANTINI COSMI SPA Via dell’Osio 6 - 20090 Caleppio di Settala MI, Italy
Ph. +39 02 956821 Fax +39 02 95307006 [email protected]