00671 dumpmaster bro 9.0
Transcription
00671 dumpmaster bro 9.0
00671 dumpmaster bro 9.0 9/19/05 1:33 PM Page 1 There’s no better bin-tipper than a Guarding options Tip any bin at any height, effortlessly The choices available include: • Side-only wire mesh guarding (no door) • Full-cage guarding which includes an electrically interlocked door (i.e. the machine will not operate unless the door is shut) Quiet • The guarding may be either welded wire mesh, or unbreakable clear plastic panels (as shown at left) • With wire mesh guarding the door is usually ‘full-height’ (2.2m) • Clear plastic guarding is only available with a ‘half-height’ door (1.4m) ‘Nominal Tipping Height’ (1800mm shown) Safe Efficient Heavy-duty tipping Overall height is 1065mm more than ‘Nominal Tipping Height’ (2865mm shown) OPTIONS SHOWN IN PHOTO: HEIGHT: 1800mm tipping height GUARDING: full-cage PET-G BIN CRADLE: 120/240 litre bin cradle 950m m overall width Versatile Easy-to-use m 1175m overall length Machine weight 160-200kg, depending on specifications Dimensions given above are for standard machines only Freephone (NZ only): 0800 7 3 4 744 Designed and manufactured in New Zealand by Simpro Handling Equipment. 51-53 Church Street, Onehunga PO Box 13-679, Onehunga, Auckland, New Zealand Phone: +64-9-634 7445 Fax: +64 9 634 7438 Simpro Handling Equipment has a programme of continual development. Specifications and features are subject to change without notice. DUMPMASTER is a registered Trademark. DUMPMASTER bin-tippers are a registered design. Compact 00671 dumpmaster bro 9.0 9/19/05 1:33 PM Page 3 DUMPMAS – the safest, most efficient and versatile bin-tipper ever designed! Tip any bin at any height Designed for emptying off truck docks OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: HEIGHT: 700mm tipping height GUARDING: full-cage PET-G BIN CRADLE: 80/120/240 litre bin cradle HEIGHT: 1200mm tipping height GUARDING: side-guarding BIN CRADLE: 240 litre bin cradle HEIGHT: 1500mm tipping height GUARDING: side-guarding BIN CRADLE: 200 litre drum cradle HEIGHT: 2700mm tipping height GUARDING: full-cage PET-G BIN CRADLE: 120/240 litre bin cradle HEIGHT: 1800mm tipping height GUARDING: full-cage mesh BIN CRADLE: 120/240 litre bin cradle HEIGHT: 1500mm tipping height GUARDING: full-cage mesh BIN CRADLE: 120/240/660 litre bin cradle Shown: a selection from the dumpmaster range. All machines are available with your choice of tipping height, guarding type, bin cradle, and power source. Eliminates back strain DUMPMASTERS empty bins from floor level effortlessly with the simple push of a button – the safe alternative with no bending or lifting required by the operator. Safe to use Bins are raised vertically, then gently rolled forward when they are at the right height. This design uses a minimum of space, and is much safer than tippers that rotate the bin around a fixed pivot point. The bin and cradle come down by gravity alone, which increases the DUMPMASTERS safety. Up to 300kg bin weight* Standard DUMPMASTERS can empty bins up to 250kg. In some circumstances the machines can be modified to take bins up to 300kg. A hydraulic pressure-relief valve prevents overloading. *Note: The heavy-duty MEGADUMPER range from Simpro can empty bins up to 750kg. Empty bins at any height Choose from four standard tipping heights (700mm, 1200mm, 1500mm, and 1800mm), or specify your ideal height (up to 6 metres). Empty almost any kind of bin Cradles are available to hold: 80, 120, 140, 240, 660, and 1100 litre ‘wheelie bins’, 200 litre drums, and a wide range of buckets, trays, and crates. Cradles are available that will hold two or more different sizes of bin. There’s no need to clamp standard bins. Operation couldn’t be easier Simply wheel the bin onto the cradle and press the ‘up’ button. When the bin has emptied, press the ‘down’ button. • There’s no need to strap or clamp the bin • Stop the machine at any time by taking your finger off the button • A choice of Emergency Stop or Key Switch is also offered Easy to move DUMPMASTERS have four castors for total manoeuvrability. Standard wheels are rubbertyred, 100mm diameter, with ball bearings for ease of moving. The front two castors have brakes that lock both the wheel and swivel mechanism. NEW FEATURE Semi-automatic option Mains-powered machines are now available with semiautomatic controls, where one push of the raise button takes the machine through one complete cycle. Choose your power source Choose either battery, 1-phase, or 3-phase power source. Battery powered models have a built-in automatic charger and can empty up to 12 tonnes of product on a single charge (depending on tip height, and battery condition). Standard DUMPMASTERS may be used outdoors. Machines can be simply upgraded to suit more severe environmental conditions. Galvanised or stainless steel frame options DUMPMASTERS usually have a fully hot-dip galvanised steel frame with zinc-plated guarding. They can also be supplied partially or entirely from stainless steel for food and pharmaceutical applications. Maintenance -free DUMPMASTERS are virtually maintenance-free. 00671 dumpmaster bro 9.0 9/19/05 1:33 PM Page 3 DUMPMAS – the safest, most efficient and versatile bin-tipper ever designed! Tip any bin at any height Designed for emptying off truck docks OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: OPTIONS SHOWN IN PHOTO: HEIGHT: 700mm tipping height GUARDING: full-cage PET-G BIN CRADLE: 80/120/240 litre bin cradle HEIGHT: 1200mm tipping height GUARDING: side-guarding BIN CRADLE: 240 litre bin cradle HEIGHT: 1500mm tipping height GUARDING: side-guarding BIN CRADLE: 200 litre drum cradle HEIGHT: 2700mm tipping height GUARDING: full-cage PET-G BIN CRADLE: 120/240 litre bin cradle HEIGHT: 1800mm tipping height GUARDING: full-cage mesh BIN CRADLE: 120/240 litre bin cradle HEIGHT: 1500mm tipping height GUARDING: full-cage mesh BIN CRADLE: 120/240/660 litre bin cradle Shown: a selection from the dumpmaster range. All machines are available with your choice of tipping height, guarding type, bin cradle, and power source. Eliminates back strain DUMPMASTERS empty bins from floor level effortlessly with the simple push of a button – the safe alternative with no bending or lifting required by the operator. Safe to use Bins are raised vertically, then gently rolled forward when they are at the right height. This design uses a minimum of space, and is much safer than tippers that rotate the bin around a fixed pivot point. The bin and cradle come down by gravity alone, which increases the DUMPMASTERS safety. Up to 300kg bin weight* Standard DUMPMASTERS can empty bins up to 250kg. In some circumstances the machines can be modified to take bins up to 300kg. A hydraulic pressure-relief valve prevents overloading. *Note: The heavy-duty MEGADUMPER range from Simpro can empty bins up to 750kg. Empty bins at any height Choose from four standard tipping heights (700mm, 1200mm, 1500mm, and 1800mm), or specify your ideal height (up to 6 metres). Empty almost any kind of bin Cradles are available to hold: 80, 120, 140, 240, 660, and 1100 litre ‘wheelie bins’, 200 litre drums, and a wide range of buckets, trays, and crates. Cradles are available that will hold two or more different sizes of bin. There’s no need to clamp standard bins. Operation couldn’t be easier Simply wheel the bin onto the cradle and press the ‘up’ button. When the bin has emptied, press the ‘down’ button. • There’s no need to strap or clamp the bin • Stop the machine at any time by taking your finger off the button • A choice of Emergency Stop or Key Switch is also offered Easy to move DUMPMASTERS have four castors for total manoeuvrability. Standard wheels are rubbertyred, 100mm diameter, with ball bearings for ease of moving. The front two castors have brakes that lock both the wheel and swivel mechanism. NEW FEATURE Semi-automatic option Mains-powered machines are now available with semiautomatic controls, where one push of the raise button takes the machine through one complete cycle. Choose your power source Choose either battery, 1-phase, or 3-phase power source. Battery powered models have a built-in automatic charger and can empty up to 12 tonnes of product on a single charge (depending on tip height, and battery condition). Standard DUMPMASTERS may be used outdoors. Machines can be simply upgraded to suit more severe environmental conditions. Galvanised or stainless steel frame options DUMPMASTERS usually have a fully hot-dip galvanised steel frame with zinc-plated guarding. They can also be supplied partially or entirely from stainless steel for food and pharmaceutical applications. Maintenance -free DUMPMASTERS are virtually maintenance-free. 00671 dumpmaster bro 9.0 9/19/05 1:33 PM Page 1 There’s no better bin-tipper than a Guarding options Tip any bin at any height, effortlessly The choices available include: • Side-only wire mesh guarding (no door) • Full-cage guarding which includes an electrically interlocked door (i.e. the machine will not operate unless the door is shut) Quiet • The guarding may be either welded wire mesh, or unbreakable clear plastic panels (as shown at left) • With wire mesh guarding the door is usually ‘full-height’ (2.2m) • Clear plastic guarding is only available with a ‘half-height’ door (1.4m) ‘Nominal Tipping Height’ (1800mm shown) Safe Efficient Heavy-duty tipping Overall height is 1065mm more than ‘Nominal Tipping Height’ (2865mm shown) OPTIONS SHOWN IN PHOTO: HEIGHT: 1800mm tipping height GUARDING: full-cage PET-G BIN CRADLE: 120/240 litre bin cradle 950m m overall width Versatile Easy-to-use m 1175m overall length Machine weight 160-200kg, depending on specifications Dimensions given above are for standard machines only Freephone (NZ only): 0800 7 3 4 744 Designed and manufactured in New Zealand by Simpro Handling Equipment. 51-53 Church Street, Onehunga PO Box 13-679, Onehunga, Auckland, New Zealand Phone: +64-9-634 7445 Fax: +64 9 634 7438 Simpro Handling Equipment has a programme of continual development. Specifications and features are subject to change without notice. DUMPMASTER is a registered Trademark. DUMPMASTER bin-tippers are a registered design. Compact