ergodesk duo - trotno medtech website

Transcription

Technical Specifications
Blood Pressure Measurement
Measuring method
Measurement duration
oscillometric
30 to 45 s (depending on patient)
Measuring range
Systolic
60 to 260 mmHg
Diastolic
40 to 220 mmHg
Heart rate
35 to 240 beats/min
Cuff
Connection
metal snap lock
Size
different sizes available
Cuff pressure
300 mmHg max.
Oxygen Saturation Measurement (SpO2)
Measuring range SpO2
45 - 100 %
Pulse rate
Accuracy
SpO2
Pulse rate
Measuring method
20 to 300 bpm
+/- 2 %
(70 to 100 % )
+/- 1 digit (up to 100 bpm)
ChipOx ® technology
+/- 1 %
(> 100 bpm)
(Split Pulse Wave with Fuzzy Logic Control)
SpO2 sensors, available
Connection
Sensors, reusable
Sensors, disposable
Sensor extension cable
MiniMed plug
Softtip®, finger clip, finger clip - small, ear clip, Y-sensor, Wrap sensor
different sizes, 3M Microfoam™ design
different lengths available
Software interface
GDT interface / PC connection
USB (connection cable and driver software included)
Miscellaneous
Controls / display
Dimensions (W x D x H)
Weight
Power supply
membrane keypad / graphics LCD
19 x 17 x 20 cm
approx. 1.1 kg
AC adapter (supplied with device)
ergodesk duo
Blood Pressure / SpO2 Desktop Unit
Development and production of all ergoline products are subject to a
certified quality management system according to DIN 9001:2000 and DIN
EN ISO 13485:2003. All products are CE-marked and fulfill the requirements
of the medical device directive 93/42/EEC.
Some of the illustrations in this brochure show options which must be
purchased separately.
The data provided is based on the information valid at the time of printing.
Subject to modifications.
04_2010
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
email: [email protected]
internet: www.ergoline.com
Intuitive operation
Wide selection of SpO2 sensors
Data transmission to the PC
ergodesk duo
State-of-the art technology and extraordinary design - combining oscillometric blood pressure
And, last but not least, the integrated PC interface allows data to be conveniently transferred to
measurement and SpO2 measurement, ergodesk duo will impress you every day with its range of
the office EMR system.
sophisticated functions.
A wide selection of SpO2 sensors and different blood pressure cuffs are available as accessories.
Results are promptly available because operation is swift and intuitive and the measuring time
is short - all measured values are shown on the large, easy-to-read and well laid out display.
!N
EW
!
Ambulatory bloodpressure with SpO2 recording
(sleep apnea screening)
ergoscan duo
• oszillometric measurement
• reliable artifact rejection
• Windows® software with various functions
• integrated database
• continous recording of oxygen saturation (SpO2), programmable
• comfortable SoftTip® sensor
• USB connection to PC
• different cuff sizes available
bike ergometer
supine ergometer
stressecho-supine ergometer
cardiac rehabilitation
front panel
USB connector to PC
Technical Data
Bloodpressure measurement
Measuring method
oscillometric
Measuring time
30 – 45 s
Data retention
unlimited
Measurement intervals
2 – 90 min, programmable
Measuring range
Systolic
60 – 260 mmHg
Diastolic
40 – 220 mmHg
Heart rate (HR)
35 – 240 beats per minute
Cuff
Connector
metal notch connector
Size
Cuff pressure
300 mmHg max.
Measurement oxygen saturation
Measuring range SpO2
Heart rate
Accuracy
SpO2
Heart rate
Measurement process
Sampling rate (SpO2 values)
Connector SpO2 sensor
45 - 100 %
20 - 300 1/min
+/- 2 %
+/- 1 Digit (bis 100/min)
ChipOx ® - Technologie
(70 bis 100 % )
+/- 1 %
(> 100/min)
(Split Pulse Wave with Fuzzy Logic Control)
every 1, 2, 5 sec
MiniMed connector
Display / Control panel
Patient display
LCD (measuring results, SpO2 value, error codes)
Operating controls
membrane keypad (START/STOP, day/night/INFO)
Interface
PC connection
digital interface (USB)
 standard
 option
Miscellaneous
Dimensions (L x W x H)
colours:
Weight
Power
standard
ergoline GmbH
Lindenstrasse 5
72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
11,0 cm x 8,1 cm x 2,7 cm
196 g (incl. batteries)
2 NiMH rechargeable batteries (size AA / 2200 mAh)
The development and production of all ergoline products is underlying a
certified quality management system according to
DIN EN ISO 13485:2003.
All products are CE-labeled and fullfill the medical device directory 93/42/
EWG.
Technical changes reserved.
11/2009
ergoscan
Technical data
Measurement
Measuring method
oscillometric
Measuring time
30 – 45 s
Data retention
unlimited
Measurement intervals
2 – 90 min, programmable
Capacity
200 measurements or 30 h
Measuring range
Systolic
60 – 260 mmHg
Diastolic
40 – 220 mmHg
Heart rate (HR)
35 – 240 beats per minute
Cuff
Connector
metal notch connector
Size
Cuff pressure
300 mmHg max.
Display / Control panel
Patient display
Operating controls
LCD (measuring results, error codes)
membrane keypad (START/STOP, day/night, INFO)
Interface
PC connection
digital interface (USB)
Miscellaneous
Dimensions (L x W x H)
Weight
Operating temperature
Rel. humidity (operation)
Atmospheric pressure
Power
10.5 cm x 8.0 cm x 2.7 cm
190 g (incl. batteries)
+10°C to +40°C (50°F to 104 °F)
30 - 75 % (no condensation)
700 - 1060 hPa
2 alkaline batteries (size AA) / 2 NiMH rechargeable batteries (size AA / 1500 mAh)
Ambulatory Blood Pressure Measurement
Development and production of all ergoline products are subject to a certified quality management
system according to DIN EN ISO 13485:2003.
All products are CE-marked and fullfill the requirements of the Medical Device Directive 93/42/EEC.
All information provided is based on data valid at the date of printing.
2008_1
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
Metal cuff connector
Reliable data transfer to PC
Thoughtfully designed control panel
Operation with only 2 AA-size batteries
ergoscan
ergoscan - the state-of-the-art, noninvasive 24 hour ambulatory blood pressure system- is designed to
provide precise measurements. Reliable artifact rejection is ensured by specially developed algorithms.
The latest in microelectronic technology using high quality components, controlled production
processes and last but not least a favorable price-performance ratio are important features of this
system.
comfortable
clear
functional
Using the oscillometric measuring method,
The various display formats and analytical
With the integrated day/night button the
no bothersome electrodes or microphones
functions offered by the ergoscan-Windows®
patient can switch to the night interval,
are needed.
documentation software optimize data
irrespective of the preprogrammed timing.
The short measurement time, an ergonomic
processing and provide a sound basis for
This allows you to accurately analyze the di-
design and the very low weight of the blood
evaluation of the results, reliable diagnosis
agnostically important differences between
pressure recorder (only 190 grams incl. bat-
and therapy control.
day and night without subsequent manual
teries) ensure high wearing comfort for the
In addition to the graphic presentation of
corrections.
patient.
systole, diastole and heart rate, all measured
Additional measurements may be initiated
The intuitive ergoscan-Windows® software
values and results can, of course, also be
at any time by a key press. The INFO button
makes your everyday work a breeze by guid-
displayed numerically in tables.
can be pressed to display the most recent
ing you through the recorder programming
Network installation as well as data exchange
readings.
steps and by offering fast and safe data
with electronic patient record systems is not
Only 2 AA-size (rechargeable) batteries
transfer and an integrated patient database.
problem at all.
are necessary to record and monitor the
patient’s blood pressure for a full 24 hour
period.
ergoselect 1000 L
Technical data
Reclining ergometer
ergoselect 1000 L
Couch width
60 cm
Couch adjustment (angle)
0 - 45 °, continuous, motor driven
Motor control
Seat height adjustment
via control unit with membrane keyboard
continuous, for patients from 120 cm to 210 cm (motor driven)
Patient weight (max.)
160 kg
Drive unit
Brake system
microprocessor controlled eddy current brake
Load
6 - 999 Watt, speed independent
Accuracy
according to DIN VDE 0750-238
Speed range
30 - 130 rpm/min
Control unit
Display / patient display
load, rpm, speed, time, blood pressure, heart rate (LCD) / rpm (LED)
Graphic display (load, heart rate)

Keyboard
membrane keyboard
Exercise protocols
User programmable
Fixed incremental protocols (WHO, Hollmann, etc.)

Manual load adjustment

Options
Automatic blood pressure measurement

Leg rests (plug-in type) / pedal shoes / arm rests (stainless steel)

Detachable or extended control unit

Interface

Digital (RS-232) / analog (target load) / remote start
Miscellaneous
Dimensions, max. (L x W x H)
approx. 220 cm x 80 cm x 160 cm / space required (max.) approx. 240 cm x 80 cm
Weight
120 kg
Power
230 V (225 VA max.) / 115 V (225 VA max.)
 Standard
 Option
Reclining / Semi-reclining Ergometer
Überreicht durch
Some of the illustrations in this brochure show options which must be purchased separately.
The information provided is based on data valid at the date of printing.
9/2004
All products are CE-marked and fulfill the requirements of the Medical Device Directive 93/42/EEC.
© vexon
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
email:
[email protected]
clear layout
All important parameters are shown on the display of the
integrated control unit – The clear structure of the menus
supports the intuitive use and
facilitates system operation.
For specific requirements in a
test lab, the control unit can be
detached from the device and
positioned as needed.
functional
The ergonomically shaped padding together with the
adjustable head and shoulder support ensure a stable
position of the patient during ergometry.
safe
The standard pedals can be
replaced with specially developed
pedal shoes.
They are easy to adapt to the
size of the patient‘s shoe and
reliably prevent slipping off the
foot pedals.
upgradable
Standardized tracks on
both sides of the couch are
provided to accommodate
accessories such as adjustable arm rests, grip handles
or other devices.
comfortable
top quality
The reclining ergometer can be equipped with removable leg
rests on both sides and is thus a full-fledged examination
couch for other modalities.
The rugged base guarantees a long service life - its
powder-coated surface is hygienic, easy to clean,
resistant to chipping and scratches, and withstands
disinfectants and cleaning agents.
designed for patient comfort
practice oriented
competent
Optimum patient comfort is guaranteed by
You can use the ergometer for convenient
The rugged mechanical construction
flexible adjustment of the couch surface and
stand-alone operation with programmable
guarantees outstanding safety and trouble-
the additional head / shoulder support.
exercise test and training protocols or you
free operation, even when the ergometer
Wide footboards make it easy for patients
connect it to a variety of electrocardiographs
is permanently in use and has to withstand
to mount the ergometer, the inclination of
or PC-based ECG systems.
high loads.
ergoline reclining ergometers offer a high degree of reliability and safety for patients with suspected
the couch surface (0 – 45°) and the saddle
To meeet the needs of different stress test
All ergoline ergometers are produced with
cardiovascular disorders, for elderly and disabled individuals, as well as for exercise stress tests after
height (continuously adjustable) can be
labs and offices, the control unit may be
only high quality components (e.g., bearings
conveniently set with the integrated motor
detached from the ergometer and positioned
and eddy current brakes) and, of course,
by remote control. Thus the patient‘s upper
anywhere in the room.
satisfy all applicable standards and require-
body and legs are always at an optimal angle
The system can be upgraded with inter-
ments for medical grade crank ergometers.
with respect to the pedals.
ference-free, automatic blood pressure
A network of authorized, ergoline-trained
measurement, a microprocessor-controlled
service engineers is available in your country
function providing precise measuring values
for repairs or other service interventions
- even at high loads.
(such as inspections of the measuring
ergoselect 1000 L
There are certain things one just cannot have enough of – safety, for example.
myocardial infarction or bypass surgery.
system).
ergoselect 100 / 200
Technical data
Ergometer
ergoselect 100 P
Brake system
ergoselect 200 P
Load
Accuracy
Speed range
Adjustment of handlebars
Adjustment of saddle height
30 - 130 rpm
inclination: 360°
inclination: 360° / height: 90-126 cm
continuous, mechanic
continuous, motor-driven
160 kg
Control unit
Keyboard
membrane keyboardr
 (type K)
 (type K)
User programmable
10
10
5
5


Pulse-controlled training (integrated Polar receiver)
 (type K)
 (type K)
Predefined performance tests
 (type K)
 (type K)


Oxygen saturation measurement


Pediatric ergometry / diagnostic tests for athletes




Exercise protocols
Training protocols
Options
Interfaces
Miscellaneous
Weight
Power
approx. 90 cm x 46 cm x 133 cm
61 kg
69 kg
90-265 V / 50-60 Hz / 80 VA max.
 Standard
 Option
Bicycle ergometer
2007_2
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
Different control units (P and K)
Horizontal saddle adjustment
Adjustable crank arms
Motor-driven saddle height adjustment with
height indication
ergoselect 200
ergoselect 100
Saddle adjustment for pediatric ergometry
Continuous handlebar height adjustment
practice oriented
competent
The special ergonomic design guarantees a
Different control units allow optimum adap-
performance-enhancing seating position for
tation to the conditions in the different test
all patients, irrespective of their height. This
labs and practices. Convenient stand-alone
free operation, even when the ergometer is
ergometer is the only device on the market
operation with custom-defined exericse and
permanently in use and has to withstand high
to offer a motor-driven seat height adjust-
training protocols as well as the universal
loads.
ment, which allows even elderly patients and
connection to all types of ECG recorders or
persons with a walking disability to mount
PC-based ECG systems is possible.
only high quality components and, of course,
the ergometer easily and safely.
The system can be upgraded with interfer-
training – the integration of different modules provides users with a maximum of flexibility in
The position of the upper body and the
ence-free, automatic blood pressure measure-
configuring their personal ergometer.
angle between legs and pedals can always
ment, a microprocessor-controlled function
A network of authorized, ergoline-trained ser-
be optimally set thanks to the dual adjust-
providing precise measuring values - even at
vice engineers is available in your country for
For years leading ECG manufacturers have been integrating our ergometers in their exercise test
ment function (height and inclination) of
high loads.
repairs or other service interventions (such as
the handlebars. Special options, such as the
Heart-rate controlled training can be carried
inspections of the measuring system).
saddle shift function and adjustable pedals
out quite conveniently. A chest belt acquires
also allow exercise tests to be performed on
the ECG signals which are used to control the
children and performance tests on athletes.
ergometer workload for a constant heart rate.
ergoselect 100 / 200
The modular ergometer series “ergoselect” is a new development created as a future-proof product
concept, which once again defines benchmarks and sets the standards others strive to meet.
From a high performance ergometer for exercise ECGs to the independent use in heart-rate controlled
systems – more than 30,000 ergoline ergometers are in use today in office practices, hospitals, medical
sports centers and rehabilitation facilities around the world.
!N
EW
!
Examination couch with liftable stresstest unit
ergoselect 1100
• comfortable examination couch with adjustable headboard
• stresstest unit lifted electrically
• removable head- and shoulder support
• speed independent load from 6 - 400 Watt
• integrated stresstest programs, userd efinable
• manual mode
• digital and analog interface to ECG and PC-ECG
• various colours available
bike ergometer
supine ergometer
stresstest unit lowered
patient display (rpm)
Technical Data
Ergometer
ergoselect 1100
brake system
load
accuracy
speed range
30 - 130 U/min
patient weight (max.)
220 kg
control unit
Display / Patientdisplay
Keyboard
load, rpm, time, heart rate (LCD) / rpm (LED)
foil keyboard
stresstest programs
user definable
10
predefined programs (WHO, Hollmann etc.)
5
manual load adjustment

options
automatic bloodpressure measurement

interface
digital (RS-232) / analog (load) / remote start

miscellaneous
dimensions, max. (L x W x H)
weight
ca. 210 cm x 75 cm x 80 cm (examination couch)
ca. 140 kg
power supply
90-265 V / 50-60 Hz / 60 VA max.
 standard
 option
colours:
standard
ergoline GmbH
Lindenstrasse 5
72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
DIN EN ISO 13485:2003.
All products are CE-labeled and fullfill the medical device directory 93/42/
EWG.
11/2009
ergoselect 1200
Technical data
Couch ergometer
ergoselect 1200 P/K
Couch width
50 cm
Couch adjustment (incline and tilt)
Motor control
Seat height adjustment
0 - 45 ° each, continuous, motor driven
via control unit with membrane keyboard, 3 positions programmable
continuous, for patients from 120 cm to 210 cm (motor driven)
140 kg
Drive unit
Brake system
Load
Accuracy
Speed range
30 - 130 rpm/min
Control unit

Keyboard
membrane keyboard
Exercise protocols
User programmable
10
5

Options

Leg rests (plug-in type), arm rests (stainless steel), infusion holder

Detachable or extended control unit

Interface

Miscellaneous
approx. 240 cm x 90 cm x 180 cm / space required (max.) approx. 260 cm x 120 cm
Weight
140 kg
Power
230 V (225 VA max.) / 115 V (225 VA max.)
 Standard
 Option
Dynamic stress echocardiography
Überreicht durch
© vexon 9/2004
5_2009
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
ergoselect 1200 EL
Things only make sense when they are in the right position – in the case of dynamic stress
echocardiography this means it is absolutely essential to flexibly position the patient in lateral
decubitus.
The functional versatility of the ergoselect 1200 EL is optimally matched to these special requirements,
offering sophisticated and advanced technology that set the standards in this field of diagnostics.
Detachable control unit
Padded drop section for ultrasound examinations
Patient display showing speed
Adjustable, padded hip and shoulder supports
Memory control unit (motor control)
Standardized rails to attach accessories
Motor adjustment for “incline” and “tilt”
Pedal shoes with Velcro ties
practice oriented
competent
A convenient motor control unit allows exact
Patient safety is given top priority: wide
positioning of the patient. The couch surface
footboards make it easy for patients to
can be set to any angle between 0° and 45°
mount the ergometer, adjustable padded
- similarly, the bed can be tilted in the same
connect it to a variety of electrocardio-
rests for the head, upper body and pelvis
range for the left-lateral decubitus position.
graphs or PC-based ECG systems.
give patients support in any position and
The saddle is continuously adjustable so that
To meeet the needs of different stress test
the specially developed pedal shoes reliably
the position of the upper body and legs with
labs and offices, the control unit may be
prevent them from slipping off the pedals.
respect to the pedals is always optimal.
detached from the ergometer and positioned
The rugged mechanical construction guar-
A drop-down, imaging cut-out provides
anywhere in the room.
antees outstanding safety and trouble-free
good access to the area to be examined by
The system can be upgraded with inter-
operation, even when the ergometer is per-
ultrasound. The special ergometer can also
ference-free, automatic blood pressure
manently in use and has to withstand high
be equipped with removable leg rests on
measurement, a microprocessor-controlled
loads. All ergoline ergometers are produced
both sides and thus turns into a full-fledged
function providing precise measuring values
with only high quality components and,
couch for intermediate examinations or the
- even at high loads.
of course, satisfy all applicable standards
ideal exercise device for cardiac cath lab
and requirements for medical grade crank
examinations.
ergometers.
!N
EW
!
Bike ergometer for pediatric use
ergoselect 150
• special saddle adjustment for children
• length adjustable cranks (12 - 17 cm)
• clamping fixture allows easy change of saddle
- for use with adults
• automatic, non-invasive bloodpressure measurement
(option, upgradable)
bike ergometer
supine ergometer
Technical Data
Ergometer
brake system
ergoselect 150
load
accuracy
speed range
30 - 130 U/min
max. 60 kg (pediatric saddle) / max. 160 kg (adult saddle)
control unit
Keyboard
grafic display (load, heartrate)
foil keyboard

stresstest programs
user definable
10
5

programs for training
puls steady state training (integr. POLAR-receiver)

predefined fitness tests

options
automatic bloodpressure measurement

standard saddle with clamp fixture

interface

connection to ERS Ergoline Rehabilitation System

miscellaneous
weight
power supply
ca. 90 cm x 46 cm x 133 cm (max.)
61 kg
90-265 V / 50-60 Hz / 60 VA max.
 standard
ergoline GmbH
Lindenstrasse 5
72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
 option
The development and production of all ergoline products is underlying
a certified quality management system according to DIN EN ISO
13485:2003.
All products are CE-labeled and fullfill the medical device directory
93/42/EWG.
This brochure shows options, which are only available at higher prices.
11/2009
ergoselect 400
Technical data
Ergometer
Brake system
ergoselect 400 (arm ergometer)
Load
6- 999 Watt, speed independent
Accuracy
Speed range
Height adjustable load unit
Seat width
30 -130 rpm
for patient heights between 120 cm and 210 cm
120 kg max. (special seat)
50 cm
Control unit
Keyboard
Graphic display (load, pulse rate)
load, rpm, time, blood pressure, heart rate (LCD) / rpm (LED)
membrane keyboard

Exercise protocols
User programmable
10
5

Training protocols


Options
Wheelchair mount

ECG amplifier (ERS Rehabilitation System)

Interfaces

ERS Rehabilitation System communication port

Miscellaneous
Weight
73 kg
Power
90-265 V / 50-60 Hz / 60 VA max.
 Standard
 Option
Arm Ergometer
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
email:
[email protected]
Different control units ("P" and "K")
Electrically adjustable height
Convenient, detachable foot rests
Special mount for wheelchair
practice oriented
competent
The height of the load unit is electrically
adjustable, allowing it to be optimally
adapted to the patient's height. The special
chair which is permanently mounted to the
connect it to a variety of electrocardiographs,
ergometer and the anti-slip foot rests ensure
PC-based ECG systems or to the ergoline
loads.
an exceptional degree of comfort and safety.
Rehabilitation System ERS.
All ergoline ergometers are produced
ergoline also offers special systems for cardiovascular diagnostics and cardio training and always has
With the special wheelchair mount the front
Training sessions precisely controlled by the
the right product for your needs.
wheels are safely locked and the distance to
patient's heart rate are one of the invaluable
the drive unit can be adjusted. This enables
assets. A chest belt acquires the ECG signals
even wheelchair-confined patients to perform
which are used to control the ergometer
ergometers.
cardiovascular training and to build up
workload for a constant heart rate.
A network of authorized, ergoline-trained
ergoselect 400 arm ergometer
Specially designed for people with lower extremity impairment or for wheelchair-confined patients, the
ergoselect 400 arm ergometer is the ideal exercise and training system.
muscles in their shoulders and arms.
service engineers is available in your country
for repairs or other service interventions
(such as inspections of the measuring
system).
!N
EW
!
Bike ergometer ergoselect 50
• speed independent load
• load from 6 - 400 Watt
• deep passage
• saddle height infinitely variable
• integrated stresstest programs, user definable
• manual mode
bike ergometer
supine ergometer
Technical Data
Ergometer
brake system
ergoselect 50
load
accuracy
speed range
30 - 130 U/min
max. 160 kg
control unit
Keyboard
load, rpm, time, heart rate (LCD) / rpm (LED)
foil keyboard
stresstest programs
user definable
10
5

interface

miscellaneous
weight
power supply
ca. 90 cm x 46 cm x 133 cm (max.)
approx. 58 kg
90-265 V / 50-60 Hz / 60 VA max.
 standard
ergoline GmbH
Lindenstrasse 5
72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
 option
DIN EN ISO 13485:2003.
All products are CE-labeled and fullfill the medical device directory
93/42/EWG.
11/2009
ergoselect 600
Technical data
Ergometer
Brake system
ergoselect 600 (recumbent)
Load
6-999 Watt, speed independent
Accuracy
Speed range
Horizontal seat adjustment
Seat width
30-130 rpm
for patient heights between 150 cm and 210 cm
260 kg max.
54 cm
Control unit
Keyboard
Graphic display (load, pulse rate)
load, rpm, time, blood pressure, heart rate (LCD) / rpm (LED)
membrane keyboard

Exercise protocols
User programmable
10
5

Training protocols


Options


ECG amplifier (ERS Rehabilitation System)

Interfaces

ERS Rehabilitation System communication port

Miscellaneous
Weight
86 kg
Power
90-265 V / 50-60 Hz / 60 VA max.
 Standard
 Option
Recumbent Ergometer
10_2009
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
t
h
g
i
e
w
t
n
e
i
t
a
g
p
k
0
6
2
o
up t
comfortable
clear layout
The high back rest relieves the lumbo-pelvic region during training sessions and exercise tests.
With two different control units you are optimally prepared
for the respective exercise test conditions. The clear structure of the menus supports the intuitive use and facilitates
system operation.
Adipose patients in particular will appreciate the extremely comfortable, wide seat.
Sturdy handgrips on either side of the seat provide
added support during exercise.
For exercise testing the control unit
"P"offers all the necessary protocols
and displays the relevant parameters.
upgradable
Numerous options such as
automatic blood-pressure
measurement, integrated ECG
amplifier or connection of a
POLAR® receiver allow you to
upgrade the ergoselect 600 for
additional applications.
With control panel "K" you can perform a heart-rate-controlled training
with chest belt or integrated ECG
amplifier.
On the large graphics display a clear
waveform presents the ongoing
training session.
flexible
The position can be quickly
adjusted over a wide range
simply by lifting the notch
lever and even while the
patient is seated.
safe
The sturdy grip bars make for safe mounting and dismounting.
adjustable
Using cranks whose length is
adjustable or special pedals, you
can optimally set up the ergometer for the desired flexion
of the knee and the distance
between the pedals.
top quality
The rugged base guarantees a long service life - its
powder-coated surface is hygienic, easy to clean,
resistant to chipping and scratches, and withstands
disinfectants and cleaning agents.
practice oriented
competent
A very comfortable step-through frame, a
wide adjustment range for the seat and a
large seat surface are the important pre-
requisites for using the ergometer on obese
connect it to a variety of electrocardiographs,
patients.
PC-based ECG systems or to the ergoline
loads.
The high back rest relieves the lumbo-pelvic
rehabilitation system ERS.
region during training sessions. Particularly
Training sessions precisely controlled by the
only high quality components and, of course,
patients with lumbar spine dysfunction or
patient's heart rate are one of the invaluable
similar problems can exercise without suffer-
assets. A chest belt acquires the ECG signals
ing any pain.
which are used to control the ergometer
But also elderly and handicapped patients will profit from the ergoline recumbent ergometer which is
A network of authorized, ergoline-trained ser-
The system can be upgraded with interfer-
workload to achieve a constant heart rate.
vice engineers is available in your country for
the right exercise and training unit for this patient group.
ence-free, automatic blood pressure measure-
repairs or other service interventions (such as
ment, a microprocessor-controlled function
inspections of the measuring system).
ergoselect 600 Recumbent
Exceptional patients demand exceptional solutions.
Designed for a patient weight of up to 260 kg, the ergoselect 600 allows exercise tests and
cardiovascular training sessions to be performed even by obese patients.
providing precise measuring values - even at
high loads.
Farbkarte (*) für Sonderfarben ergoselect Polster
pistazio
646-1610
mint
646-1495
türkis
646-1338
kirsche
646-1199
dolphin
646-1609
atoll
646-1435
royal
646-1196
anthrazit
646-1197
(*) Die abgebildeten Farbmuster sind nicht verbindlich für Farbe und Struktur (z.B. Farb-Abweichungen durch Bildschirmdarstellung/Ausdruck) !!
Stand: 01. 11. 2009
ERS
Technical data
Ergometer for cardiac rehabilitation
Brake system
Load / accuracy
6 - 999 Watt, speed independent / according to DIN VDE 0750-238
Speed range
Handlebar adjustment
Saddle height adjustment
Patient weight
30 - 130 rpm
 angle: 360°

 mechanical, continuous
angle: 360° / height: 90-126 cm

motor-driven, continuous
150 kg (max.)
Control unit
Graphic display / patient display
Keyboard
ECG amplifier
Chipcard reader
load, rpm, time, blood pressure, heart rate, ECG (LCD) / rpm (LED)
membrane keyboard
single-channel ECG amplifier (3 individual leadwires / disposable electrodes)

Options
Electrode application system (3 vacuum intensities)



Miscellaneous
Interface
Dimensions, max. (L x W x H) / weight
Power
digital (RS-232) for ERS system
approx. 90 cm x 46 cm x 133 cm / 61-69 kg
90-265 V / 50-60 Hz / 80 VA max.
ERS software
Ergometer control (incl. ECG, chipcard)
16 ergometers max.
Treadmill control (incl. ECG, chipcard)

Patient and analysis database

Patient diagnosis / anamnesis
integrated diagnosis worksheet
Training types (individual / group training)
ECG storage
Documentation
Network-compatibility / data export / archive
* Please order the detailed ERS system description.
constant pulse / constant load / interval / user-programmed protocols (incl. warm-up and recovery phases)
continuous for all patients and all analyses
storage of all training data / numerous display and printout formats

 Standard
 Option
Cardiac Rehabilitation
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
Development and production of all ergoline products are subject to a certified quality management system
according to DIN EN ISO 13485:2003.
All products are CE-marked and fulfill the requirements of the Medical Device Directvie 93/42/EEC.
All information provided is based on data valid at the date of printing.
ERS - Ergoline Rehabilitation System
The quality guidelines for cardiac rehabilitation today make high demands on the systems used. The
acquisition and storage of full-disclosure data including ECG, heart rate and blood pressure for the
duration of the entire test is of particular importance.
Systematically developing the performance of the cardiovascular system is one of the major goals of
From chipcard-assisted creation of individual training protocols and reliable patient tracking to the
cardiac rehabilitation. Ergometer training on the basis of standardized protocols has more and more
automatic control of the connected ergometers and treadmills as well as the comprehensive monitoring
become the gold standard in rehabilitation.
of the training sessions, there is no need to accept compromise.
In close cooperation with physicians and physiotherapists, ergoline developed its new ERS system
The full documentation of all data - even over long periods of time - is a must for the meaningful
concept, an intuitive, sophisticated tool which is flexible enough to easily adapt to the most varied
evaluation of the training outcome.
requirements.
patient name
training phase
most recent BP values
remaining time
in phase
current ECG
current heart rate
load and pulse
curves
target heart rate
With a host of options for defining warm-up, exercise and
recovery phases, a patient's personal training protocol is easy
to configure.
You can specify a load for constant-load tests, or you specify a
target pulse rate and the ergometer will adapt the load to keep
the pulse at a constant rate.
Interval training can be selected to meet special training
requirements. Interval protocols specify individual training
units to the second - the graphic assists in defining the
protocol phases.
You can click on a particular patient's current training data at
any time to view them at a larger scale. The ECG data stored up
to this point can be reviewed on screen.
Comparing data directly with previous training sessions
provides important information for the assessment of the
patient's current performance.
While reviewing a patient's individual data, you never lose sight
of the other ECGs and you can switch to another patient at any
time.
All of a patient's single training sessions can be reviewed at
any workstation in the network.
The full-disclosure ECG data as well as all other trainingrelated information are available for analysis. Events
earkmarked during the training can be accessed directly.
Previously acquired diurnal profiles are only a mouseclick away.
On the basis of the diagram illustrating all training units that
a particular patient has completed, you can easily assess the
therapy outcome.
In addition to the load levels reached, the graphs also provide a
concise, clear presentation of the heart rate and blood pressure
trends (warm-up, training, recovery).
Tabular data preferred? View the training parameters in tabular
format and export them for further processing.
current load in Watts
protocol type
On the basis of the full-disclosure ECG and other training data displayed and stored in real time of up to 16 patients, the
physiotherapist is able to quickly assess the patient status at any time during the training. The alarms whose criteria can be separately
defined for each individual patient are readily identified on the display.
Even while the training is in progress, a patient's training and alarm parameters can be easily modified and adapted. In addition to
manual modifications you can toggle between heart-rate-targeted and constant-load protocols at any time. It is also possible to stop
the test for an individual patient whenever necessary.
Electrode application system
Patient identification via chipcard
ergoselect 400 Reha
Ergometer display with ECG waveform
Motor-driven saddle height adjustment with
height indication
ergoselect Reha
ergoselect 600 Reha
Continuous handlebar height adjustment
Horizontal saddle adjustment
For special patients we at ergoline can offer you special ergometer designs.
They are compatible with our ergoline Rehabilitation System ERS which includes ECG amplifier and chipcard reader as standard system components.
The modular rehabilitation ergometers of the ergoselect family guarantee utmost safety and trouble-free operation, even under continuous stress. To date over 35,000 ergoline ergometers are in use in practices, hospitals and rehabilitation centers.
Their special ergonomic design along with the dual adjustment capability for the handlebar (height and angle) guarantee the ideal
seating position for any body height to promote performance-enhancing training.
The arm ergometer ergoselect 400 Reha can be equipped with a wheelchair
mount which allows you to securely fasten the wheelchair while your patient
is exercising.
It is the only ergometer available today whose seat height can be electrically adjusted. This allows even elderly patients or people with
lower extremity impairment to mount the ergometer without any problems.
The integrated ECG amplifier - with the added option of an electrode application system with a three-level suction pump - acquires
an interference-free patient ECG. Many more options and accessories, from automatic blood pressure measurement to horizontal
saddle adjustment and adjustable pedal cranks are available to configure special exercise systems for individual needs.
For adipose, very heavy patients the recumbent ergometer ergoselect 600
Reha is the exercise unit of choice. With its solid, mechanical design it permits patients weighing up to 260 kg to perform cardiovascular training.
Cranks with adjustable length
Seite 8
Seite 1
optibike
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
www.optibike.de
1_2009
Exercise Ergometer
Seite 2
Seite 3
Cardiovascular training:
Do something for yourself and for your heart!
An established brand name in the medical community for over 20 years,
ergoline is synonymous with top-quality, durable bicycle ergometers and cardiac
rehabilitation systems.
To date over 40,000 ergoline ergometers are in use in practices, hospitals as well
as sports medicine and rehabilitation centers all over the world.
Leading manufacturers of ECG equipment have been integrating our ergometers
in their exercise stress test systems for many years, some of them under their own
name, showing their trust in our quality, technology and ergonomic design.
All ergoline products are designed and manufactured exclusively on our premises
in Bitz (state of Baden-Württemberg, Germany).
Our committed associates and a certified Quality Management System
(DIN 9001:2000 / DIN EN ISO 13485:2003) ensure that our "optibike ergometer"
is manufactured and tested with the same diligence and quality as our medical
equipment.
Cardiovascular exercise, when performed on a regular basis, will strengthen your immune system,
prevents cardiac disease and hypertension, promotes the loss of body weight and reduces stress.
After cardiac rehabilitation measures in particular, pulse-controlled cardiovascular training is the
method of choice for health and fitness.
It strengthens the heart, improves lung capacity and, last but not least, maintains mobility by
improving bone density and exercising joints regularly.
With the right measure of exercise and a controlled cardiovascular training program you will live to
ripe old age
“without getting out of breath easily”
“capable of taking long walks“
“looking forward to a healthy future“
“with a reduced risk of cardiovascular disease“
and “SIMPLY FEEL BETTER”.
Endurance training is like an oxygen bath for your body!
Seite 4
Seite 5
The handlebar angle is continuously adjustable,
allowing test subjects of different heights to sit
upright.
The comfortable, wide seat prevents pressure marks,
even during long training session.
Similar to a bicycle saddle, the seat tilt is adjustable.
The continuously adjustable saddle height allows you
to find the best possible position for each individual
test subject.
The optibike is very simple to operate:
Two key presses are enough to start your preferred
training program.
The chest belt supplied with the equipment uses radio
signals to send the pulse signal to the control unit.
With the pulse-controlled protocols, the optibike will
automatically maintain the load in the correct range
for the target pulse rate.
The large graphic display shows all relevant numeric
values as well as a diagram with the pulse and load
curves.
All optibikes are ready to accept chip cards.
Via the integrated chip card reader, the results of the
training session can be saved to an ergoline training
card and then downloaded to a PC for editing and
printing (opticare basic software program).
Velcro strips on the pedals ensure secure hold and
prevent the shoes from slipping off the pedals.
The casing made of durable plastic material safely
encloses all moving parts.
Height-adjustable feet are provided on the ergometer
to compensate for uneven floor conditions and to
ensure ergometer stability during the training.
Two castors provided on the ergometer allow it to be
moved around easily.
Seite 6
Quality "Made in Germany"
Seite 7
ergoline ergometers are made of premium components, some of which are specially produced for our
equipment.
All devices are exclusively manufactured on our premises in Bitz (Baden-Württemberg, Germany).
We stand by our commitment to quality, and as our customer you will enjoy exercising with your
optibike for many years to come.
Ergometer
brake system
accuracy
handlebar adjustment
Subsequently the entire frame is electroplated and thus reliably protected
against corrosion.
load
speed range
The base frames of the ergoline ergometers are made of high quality
steel components that are welded together in our own metalworking
department.
Sheet metal parts up to 8 mm thick ensure the ergometer's stability.
optibike
saddle height adjustment
body height
weight
30 - 130 rpm
angle: 360°
mechanical, continuous
approx. 120 cm to 210 cm
160 kg (max.)
Control unit
display (numeric values)
load, speed (rpm), heart rate, exercise time, km, kcal, kJ
display (graphics)
load and pulse curve
keyboard
membrane keyboard
Heart rate
The actual "drive and brake unit" is housed in a special aluminum diecast enclosure.
In contrast to the simple sheet metal fixtures used in many home
ergometers, our design ensures smooth running and reliable mounting of
axles and bearings.
With the electronically controlled eddy-current brake the set load in
watts is precisely maintained.
acquisition
chest belt with digital radio transmission
reception
radio receiver integrated in control terminal
exercise protocols
training modes
exercise protocols
in steps of 1, 5 or 10 watts
constant load, pulse-controlled, interval, manual
10 (user-configurable)
Add-ons (optional)
training documentation
PC software for exercise documentation
ergoline chipcard stores up to 60 training sessions
opticare basic
Miscellaneous
The pedals feature axles running in top quality, high precision ball
bearings.
The permanent lubrication specially implemented for ergoline makes for a
quiet, smooth spin, even after years of use.
State-of-the art microelectronic components are used both in the control
terminal as well as in the eddy-current brake controller.
weight
61 kg
power
90-265 V / 50-60 Hz / 80 VA max.
From development to production, all ergoline products are subject to a quality
management system certified to DIN 9001:2000 and for medical products, also to
DIN EN ISO 13485:2003.
Some of the illustrations in this brochure show options which must be purchased
separately.
Ergometer
brake system
optibike
load
accuracy
speed range
handlebar adjustment
saddle height adjustment
body height
weight
30 - 130 rpm
angle: 360°
mechanical, continuous
approx. 120 cm to 210 cm
160 kg (max.)
Control unit
display (numeric values)
load, speed (rpm), heart rate, exercise time, km, kcal, kJ
display (graphics)
load and pulse curve
keyboard
membrane keyboard
Heart rate
acquisition
chest belt with digital radio transmission
reception
radio receiver integrated in control terminal
Exercise protocols
training modes
exercise protocols
in steps of 1, 5 or 10 watts
10 (user-configurable)
Add-ons (optional)
training documentation
PC software for exercise documentation
ergoline chipcard stores up to 60 training sessions
opticare basic
Miscellaneous
weight
61 kg
power
90-265 V / 50-60 Hz / 80 VA max.
optibike med
Exercise Ergometer
From development to production, all ergoline products are subject to a quality management system
certified to DIN EN ISO 13485:2003.
All products are CE-marked and fulfill the requirements of the medical device directive 93/42/EEC.
5_2009
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Tel.:
+49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
The handlebar angle is continuously adjustable allowing test
subjects of different heights to sit upright.
The user interface is intuitive and easy to operate. Just press
a few keys and start exercising.
The large graphic display shows all relevant numeric values as
well as a diagram with the pulse and load curves.
The comfortable, wide seat prevents pressure marks, even
during long training session.
Similar to a bicycle saddle, the seat tilt is adjustable.
All optibikes are ready to accept chip cards.
Via the integrated chip card reader, the results of the training
session can be saved to an ergoline training card and then
downloaded to a PC for editing and printing (opticare basic
software program).
The continuously adjustable saddle height allows you to find
the best possible position for each individual test subject.
Height-adjustable feet are provided on the ergometer to
compensate for uneven floor conditions and to ensure
ergometer stability during the training.
optibike med
The perfect exercise ergometer for professional cardiovascular training.
One of the major goals of cardiological rehabilitation is the systematic development of the
cardiovascular system's performance.
optibike med supports all known training modes: pulse-controlled training by means of a digital radio
chest belt, constant load and interval training.
practice oriented
competent
The ergometer is so easy to operate that
patients will complete their training
without any problems at all.
Up to 10 different training protocols (all
training modes) can be preconfigured on
the chip card. These protocols allow all
parameters, incl. warm-up and recovery
phases, to be easily adapted to each
patient's capabilities.
guarantees outstanding safety and
trouble-free operation, even when the
ergometer is permanently in use.
Simply press a few keys and watch the
large display to see how heart rate and
load change during the session.
Training sessions precisely controlled by
the patient's heart rate are one of the
invaluable assets. A chest belt acquires
the ECG signals which are used to control
the ergometer workload to achieve a
constant heart rate.
The details of up to 60 training sessions
can be stored on the chip card and
afterwards documented and analyzed by
the doctor or physiotherapist.
All ergoline ergometers are produced
ergometers.
A network of authorized, ergolinetrained service engineers is available in
your country for repairs or other service
interventions (such as inspections of the
measuring system).
opticare basic
ergoline chip card
Type
Capacity
chip memory card
approx. 60 ergometer training sessions
Database
Number of patients
Number of training sessions
unlimited (with opticare basic home: 10)
unlimited
Training protocols
Number of protocols
Training modes
Training time
10, user-programmable
1 to 99 min
Display formats
Overview
Single training session
tabular, graphic
graphic (any parameters)
Documentation
Printouts (color or b/w)
Data export
tabular/graphic overview / single training session in graphic form
all values in a CSV file
System requirements
Operating system
Disk space
Chip card reader
Windows 2000, XP, Vista, Windows 7
approx. 5 MB for the program
SCM microsystems Chipdrive [Towitoko]
Chip Card Software
for ergoline Ergometers
Development and production of all ergoline products are subject to a
certified quality management system according to DIN 9001:2000 and DIN
EN ISO 13485:2003. All products are CE-marked and fulfill the requirements
of the medical device directive 93/42/EEC.
Some of the illustrations in this brochure show options which must be
purchased separately.
04_2010
ergoline GmbH
Lindenstrasse 5
D-72475 Bitz
Germany
Phone: +49-(0)-7431 - 9894 - 0
Fax:
+49-(0)-7431 - 9894 - 128
e-mail: [email protected]
Internet: www.ergoline.com
ergoline training ergometers come with an integrated chip card
unit that is capable of reading the training cards and of writing
to the cards.
Together with the corresponding training protocols, the
relevant patient data are stored in the database.
The configuration of a training protocol includes the definition
of the training type (e.g., pulse controlled) as well as of the
specific parameters.
The most important values from all training sessions of a
particular patient are presented in a clearly structured data
table.
As an alternative, single values (such as the maximal achieved
heart rate) can also be shown in graphic form, in a user
selectable time window.
Each single training session can be reviewed in graphic form
with heart rate and load waveforms.
On top of that, all the relevant parameters (such as the type and
duration of the training session, the max. and mean HR, etc.)
are indicated as numeric values.
opticare basic
The perfect complement for documenting cardiovascular training sessions.
Individual programs can be stored on a chip card and transferred to an ergoline ergometer for the
training session.
After the session, the ergometer saves all training data (pulse readings, load waveforms, etc.) to the
chip card. From the card, the data can be uploaded to the PC for review and documentation with the
opticare basic software program.
individual
practice oriented
documented
Up to 10 different training protocols
(constant load training, pulse controlled
training or interval training) can be
configured for each individual and stored
on an ergoline chip card.
The ergoline ergometers used for the
training sessions (ergoselect 100K / 200K,
optibike / med) can be configured to
permit training only with the protocols
stored on the chip card, making it
impossible for patients to exercise at
higher loads.
The training results of an unlimited
number of patients can be stored in the
integrated database of the opticare basic
software program.
The storage capacity of the chip card is
sufficient for a maximum of 60 ergometer
training sessions with the full set of data
(pulse waveform, load, etc.). Then the
data must be uploaded to the PC.
The data can be exported for further
processing (e.g., for research purposes).
These protocols allow all training
parameters, including warm-up and
recovery phases, to be easily adapted to
each patient's capabilities.
A multitude of display and documentation
options is available to allow patient
performance to be assessed.

ergodesk duo - trotno medtech website

Transcription

Similar documents

OLYMPIC VILLAGE ATHLETE RECREATION OPTIONS

ergOMETER ergOMETER - Total Performance Inc

ME-709 Magnetic Recumbent Exercise Bike

engines - Yamaha

Brosura - Scoala Nr. 14 Ion Tuculescu, Craiova

BPI 04-03 Brake Hardware Clip Position

Physical Therapy: Sport Rehabilitation