WAREHOUSE ThermoFlex xtra (nylon)

HEAT TRANSFER
WAREHOUSE
ThermoFlex xtra (nylon)
www.heattransferwarehouse.com
Application Instructions
Material
Nylon, leather, polyester,
and other heat sensitive
fabrics
Cut or Print Direction
Cut in reverse
Application Pressure
Medium, even pressure
peel
888.819.4421
|
Step-by-Step Instructions
1
Artwork
2
Cutting
Application Temperature
250-310 degrees
Application Time
5 seconds
Peel cold, then re-press
with a Teflon sheet for
10-15 seconds
|
3
4
-Create artwork in your software program for your vinyl cutter
-Make sure to reverse the image before sending to the cutter
-Load sheet into the cutter, color/shiny side down
-Remember you should be cutting in reverse
-Cutter settings can alter for each cutter and how dull or sharp the
blade is
-Test cutting is recommended
WEeding
-Weed away excess material with weeding tool
*Tip: Weed from the outside and work your way in
PRess & Peel
-Load garment onto heat press
-Place weeded design liner/shiny side up
-Set heat press to desired temperature
-Press with medium, even pressure for 5 seconds
-Peel cold, then cover with Teflon and re-press for 10-15 seconds
-Peel liner in one smooth direction
Peel
Cold
Tips & Tricks
Washing & Care
Wait 24 hours before first
wash
Follow wash instructions
for nylon. Turn inside out,
cold water, tumble dry
low
-Settings can alter for each cutter and how dull or sharp the
blade is
-Test cutting is recommended
-Wash inside out for the best results
-For dazzle cloth and shiny polyester materials, we highly
recommend that you wash and dry your garments prior to
pressing your design