Air Compressors and Spray Booths

Air Compressors and Spray Booths
AS176 Air Compressor
AS18B Air Compressor
AS186A Air Compressor
AS196A Dual Piston Air Compressor
with Regulator and Moisture Trap
HS-AS176
with Regulator and Moisture Trap
HS-AS18B
with Air Tank, Regulator and Moisture Trap
HS-AS186A
with Air Tank, Regulator and Moisture Trap
HS-AS196A
$155
$195
$275
$365
RRP*
RRP*
RRP*
RRP*
Braided Air Hose
Flexible yet hard wearing air hoses that is perfect complement to every airbrush.
$15 (2m)
$20 (3m)
Airbrush not
included.
RRP*
Small and quiet
Fully featured
Sustained air output
Demand the very best
The AS176 is highly suitable for delicate airbrush
work.
The AS18B is highly suitable for delicate airbrush
work.
• 1/8 HP motor with quiet operation.
• 0.3 litre air tank.
• Automatic on/off switch.
• Thermal protection.
• Bleed-type pressure regulator, pressure
• 1/6 HP motor with quiet operation.
• Automatic on/off switch.
• Thermal protection.
• True pressure regulator, pressure gauge and
For larger jobs, the AS186A combines the smooth
operation and fine air controls of the AS18B with
an air tank.
Professionals or serious hobbyists will truly appreciate the AS-196A. Powerful and smooth air source
for one or multiple airbrushes. Quiet operation that
does not annoy the people around you.
in-line
moisture trap..
moisture trap.
• Professional metal “suitcase” enclosure.
• 1/6 HP motor. with quiet operation.
• 2.5 litre air tank.
• Automatic on/off switch.
• Thermal protection.
• True pressure regulator, pressure gauge and
moisture trap.
• Professional metal “suitcase” enclosure.
• Powerful 1/4 HP motor
• Dual piston for smooth quiet operation.
• 3.5 litre air tank.
• Automatic on/off switch.
• Thermal protection.
• True pressure regulator, pressure gauge and
E420H Extension Hose Kit
HS-E420
for E420 Airbrush Spray Booth
HS-E420H
HS-E420K
These air hoses can be stretched and then
retracts to be safely out of way. Made from very
tough vinyl.
$15
• Professional metal “suitcase” enclosure.
E420 Airbrush Spray Booth
SME-AHB1
CDE-SPD-05
CDE-SPD-05-3
CDE-SPD-06
CDE-SPD-07
Recoil Air Hose
1/4” - 1/4” 2 metres
1/8” - 1/4” 2 metres
moisture trap.
E420 Airbrush Spray Booth
and Ducting Kit
1/4” - 1/4” 2 metres
1/8” - 1/4” 2 metres
1/8” - 1/4” 3 metres
1/8” - 1/8” 2 metres
1/8” - M5 2 metres
ACAC-102 Heavy Duty
Airbrush Spray Booth
CDE-AC-102
$185
$165
$30
$400
RRP*
RRP*
RRP*
RRP*
RRP*
SME-AHR1
CDE-SPD-07
HSHS-F2 True Pressure Regulator
Fine air pressure control.
Supplied with moisture trap
and pressure gauge.
$35
RRP*
HSHS-F4 Mini Moisture Trap
Small and quiet
Small and quiet
The E420 Airbrush spray booth kit will extract
overspray away from you and your work, and
filter the air.
The E420 Airbrush spray booth will extract overspray away from you and your work, and filter
the air.
• Powerful air extraction.
• Multi-layer air filter.
• Quiet operation.
• Folds up for easy storage and transport.
• Includes turntable and extension hose kit.
• Powerful air extraction.
• Multi-layer air filter.
• Quiet operation.
• Folds up for easy storage and transport.
• Includes turntable.
• (Does not include extension hose kit)
Extension Hose Kit Only – E420 Spray Booth not
included.
•
•
•
•
Fits existing E420 Spray Booths (some assembly required)
Ducts spray fumes to the outside.
•
•
•
•
Rugged metal construction
Powerful and quiet extraction fan
Large Filter
Includes turntable and ducting kit.
Removes water droplets
before it reaches your
airbrush. 1/8” connection
fits directly to the bottom
of airbrush.
Hose extends from 0.7 to 1.7m
Flat exhaust outlet easily fits into window or
door gaps.
$12
RRP*
Accessories
Quick Release Adapters
Airbrush Cups and Jars
Extremely convenient, "snap" connect and
disconnect your airbrush without unscrewing it
from the air hose.
Airbrush Cleaning & Maintenance
Airbrush Cleaning Brushes
BD-430
For ABAB-120 Gravity Feed Airbrush
$7
$7
$22
Use the BD-431 cleaning rods with
a small amount of cotton wool to
remove every last speck of dirt in
your airbrush.
For ABAB-119, ABAB-130B, ABAB-131B & ABAB-132B
Siphon Feed Airbrushes
HS-H2
$4 each
$3
$4
RRP*
Also available, extra airbrush connector ends for
the quick release adapter.
$7
RRP*
CDE-SPA-09AT-1
CDE-SPA-09-1*
CDE-SPA-08-1**
CDE-SPA-08P-1
Also suitable for Runway 13 AB-119 and AB120 airbrushes.
** Also suitable for Runway 13 AB-119AK, AB123A, AB-130B, AB-131B and AB-134B airbrushes.
$7
$7
RRP*
RRP*
Scrap gently the inside of your airbrush nozzles
with the BD-470 Airbrush Reamer to remove any
built up paint and dirt.
CDE-SPC-01
CDE-SPC-02
CDE-SPC-07
CDE-SPC-08
Paint Stirrer & Palette Set
BD-410
$7
$28
Runway 13
$25
RRP*
HS-777 and BD-777A
Ideal place to spray into solvents whilst cleaning
an airbrush. Doubles as an airbrush holder.
$4 each
$7
$11
Airbrush Grease
CDE-SPE-02
RRP*
Paint Cup 22 C.C.
(Includes adapter)
CDE-SPC-04
Paint Cup 175 C.C.
(AB-105 Only)
CDE-SPC-09
Regulator and airbrushes not included
For your nearest reseller please contact;
RRP*
RRP*
RRP*
2 Metal Paint Stirrers
2 Colour Palette
RRP*
For ABAB-133B, ABAB-134B, ALAL-133B Nozomi,
MA--101A & MAMA
MA-102A Tsubame Gravity
Feed Airbrushes & ABAB-105 Mini Spray Gun
RRP*
HS-H18 Carrousel style - Holds 8 airbrushes
includes 6-way distributer and pressure gauge
Airbrush Cleaning Station
Aztek/Testor, Badger, Iwata and Paasche are registered
trademarks of RPM, Badger Air-brush Co., Anest Iwata
Corp. and Paache Airbrush Co. respectively.
Air Hose Adapters
$3 Supplied in packs of 3.
RRP*
$95
*
Glass Jar 50 C.C.
Glass Jar 22 C.C.
Paint Cup 5 C.C.
Jar Cover & Bottle
RRP*
Small pedestals handy as
temporary bases or stands
for painting models.
Airbrush Reamer
BD-470
RRP*
RRP*
Desktop style - Holds 4 airbrushes
$25
Mini pedestals
BD-480
RRP*
Male M5 - Female 1/4”
CDE-SPA-01
Tire Adapter
CDE-SPA-02
Female M5 - Male 1/8”
CDE-SPA-05
Female 1/8” - Male 1/4” CDE-SPA-07
M1/4” - M1/4”
SME-ADPM1/4M1/4
M1/8” - F1/4”
SME-ADPM1/8F1/4
Regulator and airbrushes not included
RRP*
$5
Aztek/Testor
Badger M5
Iwata 1/8”
Paasche
$22
RRP*
Comes with a sturdy base.
Airbrush Cleaning Rods
BD-431
CDE-SPA-09AT
CDE-SPA-09*
CDE-SPA-08**
CDE-SPA-08P
Clamp style - Holds 4 airbrushes
6 arms and clips are included and the arms can
be bent to any angle.
RRP*
CDE-SPC-05
CDE-SPC-12
BD-400
Great set of extra “hands
for holding all the small
part for airbrushing.
$5
Available for all popular airbrushes fittings.
Aztek/Testor
Badger M5
Iwata 1/8”
Paasche
“Kitty Grips”
The BD-430 cleaning brushes are
impervious to most solvents and
comes with 5 different sizes brushes to get to all the hard to reach
bits.
RRP*
Paint Cup 3 C.C.
Paint Cup 7 C.C.
RRP*
Deluxe Airbrush Holder
HS-H1
RRP*
$9 each
Painting Accessories
$4
RRP*
Apply a small amount of
airbrush grease to the needle
and air valve to maintain a
smooth trigger action on your
airbrush, .
“Smiggen and Dash” Stainless Steel Paint Mixing Set
CDE-PM101
2 Stainless Steel measuring
scoops
1 Pipette
$8
RRP*
P.O. Box 3250,
Belconnen Business Centre,
ACT 2617
Tel
0419 228 287
Email
[email protected]
Web
www.runway13.com
Providing sales, spare parts and service for
extensive range of airbrushes, compressors
and accessories.
RRP* is the Recommended Retail Price only and may vary
with resellers.
Specifications for products are correct at 29/03/2012 are
subject to change without notice.