SPECK Catalogue - ISSUE 2

Transcription

SPECK PUMPS (UK) LTD
History
Speck Pumps in Germany started as a small family enterprise back in 1909. The four factories
which now make up the Speck Group, manufacture all types of pumps covering the majority of
applications.
Speck Kolbenpumpenfabrik - High Pressure Triplex Pumps
Speck Pumpen (Hilpoltstein) - Large Centrifugal Pumps
Speck Pumpenfabrik (Roth) - Small Centrifugal Pumps
Speck Pumpen (Lauf) - Swimming Pool Pumps
Speck Pumps (UK) Ltd was formed in 1984 and is the sole distributor for the SPECK range of
high pressure triplex and axial pumps within the United Kingdom and Ireland. Speck Pumps (UK)
Ltd is a wholly owned subsidiary of SPECK Kolbenpumpenfabrik.
Product Range
The Speck range of pumps has an excellent reputation for reliability and longevity.
Here at Speck Pumps (UK) Ltd we hold extensive stocks of the Speck range of pumps and
spares. We are also able to offer a comprehensive range of accessories used alongside our
pumps. This range includes items such as unloader valves, guns, lances, nozzles etc. Full details
can be found within this catalogue.
In addition to our stock holding of high pressure triplex pumps, we are also able to supply
products from the rest of the Speck Group to order, for more information please contact us.
Customer Focus
Speck prides itself on providing a highly customer focused service. We were the first in our
industry to obtain BS5750 approval way back in 1993. We have continued with this and have
been awarded the ISO9001 : 2000 certificate.
Extensive Technical Knowledge
Speck Pumps (UK) Ltd is proud of its excellent reputation for technical support. Extensive
experience based in the UK and direct access to the technical department based in Germany
enables us to respond to your queries with ease.
Pump and Unloader Valve data sheets together with parts lists and exploded drawings can be
downloaded from our web site www.speck.co.uk.
Delivery
We aim to be able to despatch all our popular lines from stock on the day of order.
All items are sent next day delivery for most UK destinations (some exceptions apply).
No Minimum Order Charge
All prices exclude VAT and carriage. E & O E
1/2/07
fax: 01494 441542
[email protected]
Contents
Contents
1
1
2
4
11
28
Pumps
A Pump Range
NP Pump Range
P Pump Range
28
33
34
35
37
39
41
44
45
47
51
53
56
Pump Accessories
11
11
12
13
Bell Housings
Gear Boxes
Drive Couplings
Motors
14
Unloaders
20
Guns
56
25
Accessories
Data and Index
57
60
63
Lances
Nozzles
Pressure Gauges
Hose Reels
Floor Cleaners
Accessories
Siphon Injectors
Ancillaries
Pressure Switches
Filters
Couplings
Swivels
Tools
Seal & Valve Kits
Technical Data
Nozzle Chart
Index
Speck Pumps (UK) Ltd
Unit 11-12, Wycombe Industrial Mall, West End Street
High Wycombe, Bucks HP11 2QY
T:
01494 523203
F:
01494 441542
E:
[email protected]
W:
www.speck.co.uk
www.speck.co.uk
[1Q]
tel: 01494 523203
Introduction
PUMPS • UNLOADERS • GUNS • LANCES • ACCESSORIES
Welcome to the new SPECK Pumps catalogue. This catalogue has been
designed to be easy to use. In addition to the usual contents and index
pages, key information has been added to the top and bottom of each
page to help you find what you are looking for.
Along the top of each page you will find a title block. The top
title will show you the main theme of the page, eg pumps,
unloaders, guns etc.
Below this are a set headings repeated on every page. The highlighted word shows
you how far you are through the catalogue, so you can easily go forward or
backwards a few pages to help find what you want.
A number of products in this catalogue, particularly pumps, have special options and accessories,
such as stainless steel versions, teflon seals, bell housings, gearboxes etc.
To help you find what options are available for a specific product a common key has been used, and
is shown below the photograph of each product.
RE 316 Stainless Steel
CO2 CO2 Version
R 303 Stainless Steel
DP Duplex Steel Head
D High Temperature Version
G Gearbox Available
DK High Temperature Version with Coolant Connections
B Bell Housing for Electric Motor
T Teflon Seals
Bn for pumping Bentonite
V Viton Seals
Bz Bronze Head
S Seawater Version
For pricing on these special pump options please contact us.
SPECK Pumps is a flexible company trying to meet your needs. If you require pumps for a special
application, or you would like to personalise our range with your company colours and logos, we are
always happy to help.
The bottom of each page has headings specific to the section
you are in. For example when you are looking in the pumps
section, all the pumps which we sell are listed in order of
size, the smallest on the left to the largest on the right.
Products on the current page are highlighted.
We hope you find this catalogue easy to use and that it contains all the
information which you require. However if you would like any further
information on any products or if you need something you cannot find
please contact us.
A11 • NP10 • P11 • A51 • NP16 • P21 • P22 • NP25 • P30 • P41 • P45 • P50 • P51 • P52 • P55 • P62 • P71 • P80
fax: 01494 441542
[email protected]
A Series Pumps
A Range Pumps
The A range of pumps exemplifies the modern compact design of axial pumps (wobble plate pumps) and are particularly
suited to direct drive by electric or petrol/diesel engines. The A51 can be supplied with a special integrated mounting
flange allowing quick and easy connection to your chosen engine. This pump with its five pistons is renowned for its
excellent pulsation characteristics, and is suited to reverse osmosis and small factory ring main applications.
Materials Used
Aluminium Crankcase
Brass Head Casing
Ceramic Plungers
Twin Axial Ball Bearings
Stainless Steel Valves
Nitrile Seals with Fabric Reinforcement
A11 Range
This pump runs at 2700 rpm
Model
A11/10-100
I/min
bar
gpm
psi
9.4
100
2.1
1450
Price
For Similar Performance Also See NP10 And P11 Ranges
Full technical specifications and unloader valve recommendations can be found on page 57 - 59
A51 Range
Model
I/min
bar
gpm
psi
Rpm
A51/10-250
10.2
250
2.2
3625
1450
A51/20-160
19.8
160
4.4
2320
2900
A51/15-200 H*
15.0
200
3.3
2900
3000
Price
* For direct fitting on to engine
For Similar Performance Also See NP16 And P21 Ranges
www.speck.co.uk
tel: 01494 523203
Page 1
NP Series Pumps
NP Range Pumps
The construction and production of the NP range of pumps is based on SPECK’s extensive experience and utilises the most
up to date production technology. This has produced a pump range offering an excellent price – performance ratio. The
symmetrical design of the pump allows it to be used in left or right hand configuration assisting in the manufacture of
compact units.
Key
Materials Used
Valve Casing - Special Brass/Cast Bronze
T Teflon Seals
Plunger - Solid ceramic with stainless steel retaining bolt
V Viton Seals
Valves - Stainless Steel
S Seawater Version
Sleeves - Nitrile with fabric reinforcing (Standard versions)
CO2 CO2 Version
Crankshaft - Drop forged and case hardened.
G Gearbox Available
These pumps can also be offered with seal and material specifications to cope with your
special needs. ie stainless steel and bronze heads, Teflon, viton seals and special build for
CO² duty. Just look for the symbols against each pump for versions available
B Bell Housing for Electric Motor
NP10 Range
1420 rpm
Model
I/min
bar
gpm
psi
NP10/4-140
3.6
140
0.79
2030
NP10/10-140
10.6
140
2.3
2030
NP10/13-140
13.1
140
2.9
2030
NP10/15-140
14.6
140
3.2
2030
Price
Special low volume versions available for specialist uses such as
polyurethane foam applications
OPTIONS
B
G
RE
T
CO2
S
V
For Similar Performance Also See P11 And A11 Ranges
Full technical specifications and unloader valve recommendations
can be found on page 57 - 59
Page 2
fax: 01494 441542
[email protected]
NP Series Pumps
NP16 Range
1420 rpm
Model
I/min
bar
gpm
psi
NP16/15-210
15.0
210
3.3
3045
NP16/18-140
18.3
140
4.0
2030
NP16/21-140
20.8
140
4.6
2030
1
13.9
210
3.1
3045
2
14.4
220
3.2
3190
3
14.1
280
3.1
4060
NP16/14-210
NP16/13-220
NP16/13-280
Price
1 - Max Speed 1800 rpm
OPTIONS
For Similar Performance Also See A51, P21 And P22 Ranges
B
G
NP25 Range
1420 rpm
Model
I/min
bar
gpm
psi
NP25/12-500*
12.1
500
2.6
7250
NP25/15-500*
14.5
500
3.2
7250
NP25/21-350
20.8
350
4.9
5075
NP25/21-280
21.0
280
4.7
4060
NP25/25-220
25.2
220
5.6
3190
NP25/30-180
31.4
180
7.0
2610
NP25/38-150
37.7
150
8.4
2175
NP25/41-140
40.6
140
9.0
2030
NP25/50-120
48.7
120
10.8
1740
NP25/70-100
70.0
100
15.4
1450
Price
* Max Water Temperature 40°C
OPTIONS
For Similar Performance Also See P30
B
G
RE
T
CO2
S
V
www.speck.co.uk
tel: 01494 523203
Page 3
P Series Pumps
P Range Pumps
The P range of pumps reinforce the SPECK reputation for high quality performance matched to unrivalled reliability. These
pumps have proved to be the choice for continuous operation and are particularly suited to pumping hot water. All
standard pumps can be used with fluids up to 70°C as standard. The D option available can extend this to 105°C.
Key
Materials Used
CO2 CO2 Version
Valve Casing - Special Brass/Cast Bronze/Stainless Steel
R 303 Stainless Steel
G Gearbox Available
Plunger
- Solid ceramic with stainless steel retaining bolt
D High Temperature Version
B
Valves
- Stainless Steel
Sleeves
- Nitrile with fabric reinforcing (Standard versions)
Crankshaft
- Drop forged and case hardened.
DK
High Temperature Version
with Coolant Connections
Bell Housing for
Electric Motor
DP Duplex Steel
T Teflon Seals
Bn for Bentonite
V Viton Seals
Bz Bronze Head
S Seawater Version
MS Special Brass Head
Many of these pumps can also be offered with seal and material
specifications to cope with your special needs. ie stainless steel and bronze
heads, Teflon, viton seals and special builds for CO², Pentane and Bentonite
duty. Just look for the symbols against each pump for versions available.
P11 Range
1420 rpm
Model
OPTIONS
B
D
I/min
bar
gpm
psi
P11/3-200
3.1
200
0.68
2900
P11/5-200
4.7
200
1.0
2900
P11/10-100
10.2
150
2.2
2175
P11/13-100
12.7
150
2.8
2175
P11/15-150
14.7
150
3.2
2175
Price
For Similar Performance Also See NP10 And A11 Ranges
Page 4
fax: 01494 441542
[email protected]
P Series Pumps
P21 Range
1450 rpm
Model
I/min
bar
gpm
psi
P21/5-450*
5.1
450
1.1
6525
P21/7-400*
6.8
400
1.5
5800
P21/15-160
14.7
160
3.2
2320
P21/16-200
15.1
200
3.3
2900
P21/18-130
18.1
130
4.0
1885
P21/23-130
23.1
130
5.1
1885
Price
*Fitted with stainless steel head
OPTIONS
For Similar Performance Also See NP16 Range
B
RE
T
S
V
D
P22 Range
1450 rpm
Model
I/min
bar
gpm
psi
P22/15-2802
15.1
280
3.3
4060
2
19.0
240
4.2
3480
1
28.3
100
6.2
1450
2
28.3
130
6.2
1885
P22/21-240 *
P22/28-100
P22/28-130
Price
new
*Single ended shaft
OPTIONS
B
1
G
2
www.speck.co.uk
tel: 01494 523203
Page 5
P Series Pumps
P30/P31 Range
1420 rpm
I/min
bar
gpm
psi
P31/25-220
25.2
220
5.6
3190
P30/36-150
36.2
150
8.0
2175
P30/43-130
42.5
130
9.4
1885
Price
For Similar Performance Also See NP25 Range
OPTIONS
D
Model
B
P41 Range
14501 and 11002 rpm
Model
I/min
bar
gpm
psi
P41/33-2501
33.8
250
7.5
3625
1
48.6
180
10.7
2610
2
51.2
130
11.3
1885
2
P41/58-110
58.2
110
12.8
1595
P41/70-110
67.7
110
14.9
1595
P41/48-180
P41/51-130
Price
new
OPTIONS
S
DK RE
(P41/70-110 only)
Page 6
fax: 01494 441542
[email protected]
P Series Pumps
P45 Range
1000 rpm
A Pump specifically designed for drain jetting and similar applications
Model
I/min
bar
gpm
psi
P45/37-400MS**
37.0
400
8.1
5800
P45/46-320*
46.0
320
10.1
4640
P45/60-250
57.0
250
12.6
3625
P45/75-180
74.5
180
16.4
2610
P45/85-160
85.5
160
18.8
2320
P45/120-80
123.1
80
27.1
1160
Price
new
* Stainless Steel AISI 303 Head
** Special Brass Head
OPTION
For Similar Performance Also See P52 Range
R
MS
G
P50 Range
800 rpm1 570 rpm2
Model
1
P50/94-110
P50/94-110D2
2
P50/94-110DK
I/min
bar
gpm
psi
93.8
110
20.7
1595
66.8
8.0
14.7
1160
66.8
8.0
14.7
1160
Price
OPTIONS
D
DK
R
RE
www.speck.co.uk
tel: 01494 523203
Page 7
P Series Pumps
P51 Range
800 rpm1 1000 rpm2
Model
I/min
bar
gpm
psi
1
134.1
90
29.6
1305
2
97.3
140
21.5
2030
P51/135-90
P51/97-140
Price
OPTIONS
G
S
RE DP
Bz
P52 Range
1
1000 rpm (570 rpm1)
Model
2
I/min
bar
gpm
psi
P52/12-1000
12.8
1000
2.8
14500
P52/17-800
17.5
800
3.8
11600
P52/22-600
22.8
600
5.0
8700
P52/30-500
30.0
500
6.6
7250
P52/30-500MS
30.0
500
6.6
7250
2 P52/37-400
37.0
400
8.1
5800
2 P52/54-270
53.6
270
11.8
3915
1 P52/72-200
72.2
200
15.8
2900
1 P52/100-150
98.3
150
21.6
2175
123.1
120
27.1
1740
70.0
100
15.4
1450
1 P52/120-120
1
new
OPTIONS
G
R
T
CO2 MS Bn
RE
V
1 P52/70-100BN
Price
Page 8
fax: 01494 441542
[email protected]
P Series Pumps
P55 Range
new
7303, 9102, 10001 rpm
Model
1
P55/80-250G
I/min
bar
gpm
psi
78.0
250
17.2
3625
1
P55/100-200G
104.9
200
23.1
2900
P55/128-160G2
127.8
160
28.1
2320
3
164.6
100
36.0
1450
P55/165-100G
Price
OPTION
Please note – this pump has a cast iron valve casing, and is designed specially for drain jetting applications
RE
P62 Range
800 rpm1 600 rpm2
Model
1
P62/50-420R
1
P62/70-300
1
P62/90-210
1
P62/140-150
P62/160-100BN2
1
P62/175-120
I/min
bar
gpm
psi
48.5
420
10.7
6090
68.1
300
15.0
4350
88.9
210
19.5
3045
139.0
150
30.5
2175
160
100
35.2
1450
175.9
120
38.7
1740
Price
new
OPTIONS
Bn
R
S
www.speck.co.uk
tel: 01494 523203
Page 9
P Series Pumps
P71 Range
7002 and 7501 rpm
Model
I/min
bar
gpm
psi
37.5
700
8.7
10150
P71/50-500R
48.0
500
10.5
7250
P71/70-4001
67.7
400
14.9
5800
1
P71/40-700
1
1
88.5
300
19.5
4350
2
107.0
250
23.5
3625
2
P71/145-180
145.3
180
31.9
2610
P71/145-180G2
145.3
180
31.9
2610
205.8
130
45.2
1885
205.8
130
45.2
1885
249.1
100
54.7
1450
249.1
100
54.7
1450
P72/320-70 DUP
320.0
70
70.5
1015
P72/320-70 BN
320.0
70
70.5
1015
P72/320-100R
320.0
100
70.5
1450
P71/90-300
P71/110-250
2
P71/200-130
SHOWN WITH
OPTIONAL GEARBOX
2
P71/200-130G
2
P71/250-100
P71/250-100G2
2
new
OPTIONS
R
RE
CO2 DK
S
G
DP Bn
Price
P80 Range
580 rpm
Model
I/min
bar
gpm
psi
P80/110-500
110
500
23.5
7250
P80/185-300G
185
300
40.8
4350
P80/215-260G
215
260
474
3770
P80/285-200G
110
200
62.80
3000
P80/340-170G
337.0
170
74.2
2465
P80/400-140G
400.0
140
88.1
2030
Price
Supplement for Gearbox
new
OPTION
G
Bz
Page 10
fax: 01494 441542
[email protected]
Pump Accessories
Bell Housings
Part No
Suitable For Pump Range
Max kW
Price
20.0043
P11/P21
6
20.0152
NP10/NP16
6
20.0167
NP25
7.5
20.0232
P30
7.5
20.0168
NP25
11
20.0235
P30
11
20.0207
P41
18
B5
B14A
Small Gearbox for NP10 Pump Range
Small gearbox for direct connection to petrol/diesel engine
With Ø19 mm output shafts
Flange Size
SAE609a
Max Power
4.8 kW
6 HP
Reduction Ratio
2.3 : 1
3450 : 1450 rpm
Part No
50.0600.00
Price
NP10 / NP16
Gearbox for NP10, NP16, NP25, P22 Pump Ranges
Gearbox for direct connection to petrol/diesel engine
With Ø25.4mm (1”) Output shafts. Q Type.
Flange Size
SAE609a
Reduction Ratio
2.176 : 1
Part No
3100 : 1425 rpm
Max Power
12.0001
NP10/NP16
7kW, 10 HP
12.0002
P22
7kW, 10 HP
12.0003
NP25
13 kW 18 HP
www.speck.co.uk
Price
tel: 01494 523203
Page 11
Pump Accessories
Drive Couplings
Suitable for direct connection to a motor via a bell housing.
Pump Range
Shaft Diameter
P11
18mm Shaft
P21
22mm Shaft
NP10, NP16
24mm Shaft
P30, NP25
28mm Shaft
P41
28mm Shaft
Spares For Flexi Couplings
Part No
Coupling Size
Max kW
20.0092
Star For Flexi Coupling
4
20.0093
Star For HD Flexi Coupling
6
20.0211a
Star for Large Flexi Coupling
11
Price
Flexi Couplings
Part No
Coupling Size
Max kW
20.0083
18 – 24 mm
1.5
20.0044
18 – 28 mm
4
20.0045
22 – 28 mm
4
20.0234
22 – 28 mm HD
6
20.0046
22 – 38 mm
6
20.0169
24 – 25 mm Large
6
20.0161
24 – 28 mm
4
20.0233
24 – 28 mm HD
6
20.0172
24 – 38 mm
6
20.0047
28 – 38 mm
7.5
20.0211
28 – 42 mm
11
Price
Solid Couplings
Part No
Page 12
Coupling Size
Max kW
20.0070
18 – 24 mm
6
20.0039
18 – 28 mm
6
20.0075
22 – 24 mm
6
20.0038
22 – 28 mm
6
20.0040
22 – 38 mm
11
20.0037
28 – 38 mm
11
fax: 01494 441542
Price
[email protected]
Pump Accessories
Hollow Shaft Motors
High quality Motors custom made to enable the NP10 and NP16 (24mm shaft diameter) range of pumps to attach direct
to motor via hollow shaft. All motors are S1 rated for continuous operation. All single phase motors fitted with integral
On/Off Switch.
Part No
kW
Frame Size Phase
RPM
IP
28.0051
1.85
90 L C4
1~
1450
IP55
28.0056
1.85
100 C4
1~
1450
IP55
28.0058
2.2
100 A4
1~
1450
IP55
28.0042
5.5
112 B4
3~
1450
IP54
Price
Male Shaft Motors
High quality Male Shaft Motors supplied with C face flange for use with appropriate bell housing. All motors are S1 rated
for continuous operation. All single phase motors fitted with integral On/Off Switch.
Part No
28.0054*
kW
Frame Size Phase
RPM
IP
1.85
90 L
1~
2850
IP55
000
5.5
112 M
3~
1450
IP55
27.0016
11
160 M
3~
1450
IP55
Price
* Motor For A11 Pumps
www.speck.co.uk
tel: 01494 523203
Page 13
Unloader Valves
Unloader Valves
Unloader valves should be used to protect the pump. The full flow from the pump must pass through the unloader valve
for satisfactory operation. Should the actual operating pressure exceed that of the adjusted pressure the unloader valve
will act as a pressure regulator, bypassing excess fluid to ensure the adjusted pressure is not exceeded. The valve will
switch to pressure free bypass when the spray gun is shut off and the line pressure between gun and valve remains
dormant.
The valve can be used to control several spray guns simultaneously. Several pumps can
also be connected to a common discharge line. For specialist applications our unloader
valves are available in alternative materials, eg bronze, stainless steel.
Key
Unloaders designated PL are particularly suited to centralised and multi pump ring main
systems. These unloaders are supplied with a plate and seat instead of the normal kick
back valve cone. This reduction in mass tends to change the resonant frequency of the
303
Stainless
Steel
pipework, and has increased the service life of certain difficult installations. The UL 262 is
R
already supplied in this configuration as standard.
V Viton Seals
UL180 Unloader
Part No
OPTION
V
Model
I/min
bar
g/min psi
00.0733
UL180
30
210
6.6
3045
00.0989
UL180 H
30
210
6.6
3045
00.0969
UL180 PM
30
210
6.6
3045
00.3086
UL180 PL
30
210
6.6
3045
00.3805
UL180/280
30
280
6.6
4060
00.3606
UL180/280 H
30
280
6.6
4060
00.3939
UL180/280 PM
30
280
6.6
4060
Price
H = With Handwheel
PM = Suitable for Panel Mounting (Complete With Handwheel)
PL = Plated Unloader (Complete With Handwheel)
Close Coupled Unloader
A close coupled unloader suitable for use with both the NP10 and
NP16 pump ranges
Part No
Model
I/min
bar
g/min psi
12.6291
VB135 Suitable for NP10 Pump
25
160
5.5
2320
12.6292
VB75 Suitable for NP16 Pump
30
220
6.6
3190
Price
UL180 • UL221 • UL50/500 • VB80 • UL262 • UL300 • UL500
Page 14
fax: 01494 441542
[email protected]
Unloader Valves
UL221 Unloader
Part No
Model
I/min
bar
g/min
psi
00.0639
UL221/100
50
100
11
1450
00.0804
UL221/100 H
50
100
11
1450
00.0640
UL221/140
50
140
11
2030
00.0805
UL221/140 H
50
140
11
2030
00.3876
UL221/140 PL
50
140
11
2030
00.0817
UL221/200
50
210
11
3045
00.0818
UL221/200 H
50
210
11
3045
00.3877
UL221/200 PL
50
210
11
3045
Price
H = With Handwheel
UL50/500 Unloader
Part No
Model
I/min
bar
g/min psi
00.5000
UL50/500
50
500
11
7250
00.5070
UL50/500 with throttle
50
500
11
7250
Price
new
VB80 Unloader
Stainless Steel Construction, in 303 and 316
Part No
Model
I/min
bar
g/min
psi
60.0430.15 VB80/150 303
80
150
17.6
2175
60.0430.40 VB80/280 303
80
280
17.6
4060
60.0430.00 VB80/400 303
80
400
17.6
5800
60.0450.00 VB80/150 316
80
150
17.6
2175
60.0450.60 VB80/280 316
80
280
17.6
4060
Price
OPTIONS
R
RE
UL180 • UL221 • UL50/500 • VB80 • UL262 • UL300 • UL500
www.speck.co.uk
tel: 01494 523203
Page 15
Unloader Valves
UL262 Unloader
Part No
Model
I/min
bar
g/min psi
00.4810
UL262/1
135
120
30
1740
00.4674
UL262/1 H
135
120
30
1740
00.4815
UL262/2
100
280
22
4060
00.4814
UL262/2 H
100
280
22
4060
00.4820
UL262/3
135
40
30
580
00.4819
UL262/3 H
135
40
30
580
I/min
bar
g/min psi
Price
H = With Handwheel
OPTIONS
R
RE
V
UL300 Unloader
new
OPTION
R
Part No
Model
00.0540
UL300/1
225
110
49.6
1595
00.5865
UL300/1 H
225
110
49.6
1595
00.0806
UL300/2
120
220
26.4
3190.
00.5864
UL300/2 H
120
220
26.4
3190.
00.0807
UL300/3
60
400
13.2
5800.
00.5820
UL300/3 H
60
400
13.2
5800.
00.2879
UL300/4
225
80
49.6
1160.
00.5845
UL300/4 H
225
80
49.6
1160.
I/min
bar
g/min psi
Price
UL500 Unloader
Fail Safe Design
Part No
Model
00.3929
UL500/11 H
250
150
55.1
2175
00.5273
UL500/32 H
100
500
22.0
7250
Price
H = With Handwheel
UL500 Pneumatic Unloader
Fail Safe Design
Typically requires 6 bar air pressure to maintain 100 bar
Linear air pressure adjustment
Part No
OPTION
R
Model
I/min
bar
g/min psi
00.4751
UL500/11 P
250
150
55.1
2175
00.5275
UL500/32 P
100
500
22.0
7250
Price
UL180 • UL221 • UL50/500 • VB80 • UL262 • UL300 • UL500
Page 16
fax: 01494 441542
[email protected]
Safety Valves
Pressure Relief And Safety Valves
A safety valve is used to protect the pump in case of overpressure. It does this by releasing the excess pressure in a system
when all other devices fail, and is often used as an additional backup to an unloader valve. They can also be used to
provide additional safety to an individual run of pipework in a centralised cleaning system. They are usually fitted into a
“Tee” so do not see the system flow.
S250 Safety Valve
Part No
00.1080
Model
S250
I/min
bar
g/min
psi
30.0
250
6.6
3625
I/min
bar
g/min
psi
25
350
5.5
5075
g/min
psi
Price
VS350 Safety Valve
Part No
Model
60.0580.00 VS350
Price
S50/1000 Safety Valve
Part No
00.5299
Model
I/min
bar
50
1000
I/min
bar
g/min
psi
80
500
17.6
7250
S50/1000
Price
11.0 14500
VS500 Safety Valve
Part No
Model
60.5200.00 VS500
Price
S250 • VS350 • S50/1000 • VS500 • VS80 • Si151 • VS200/180
www.speck.co.uk
tel: 01494 523203
Page 17
Safety Valves
VS80 Safety Valve
Part No
OPTIONS
R
Model
I/min
bar
g/min psi
60.0590.00 VS80/150 316
80
150
17.6
2175
60.0590.60 VS80/280 316
80
280
17.6
4060
60.0550.00 VS400 303
80
400
17.6
5800
Price
RE
VS200/180 Safety Valve
Part No
Model
I/min
bar
200
180
I/min
bar
250
280
60.5100.15 VS200
g/min psi
44
Price
2610
new
Si 151 Safety Valve
Part No
00.4630
Model
Si151
g/min psi
55
Price
4060
new
S400 Safety Valve
New pneumatic safety valve for large floor pumps. (Due early 2007.)
Part No
tba
Model
S400P
I/min
bar
g/min psi
400
200
88.1
Price
2900
Manual versions due late 2007.
new
S250 • VS350 • S50/1000 • VS500 • VS80 • VS200/180 • Si151 • S400
Page 18
fax: 01494 441542
[email protected]
Accumulators
Accumulators
Accumulators are commonly used to reduce system pressure peaks. They are often used for centralised cleaning systems
with long pipe runs to eliminate water hammer. The accumulator should not be fitted where it will be subjected to full
system flow. SPECK accumulators are charged with nitrogen at our works to suit your system. We normally recommend
that pressure accumulators are charged to 50% of system working pressure.
MS160C Accumulator
Part No
00.5581
Model
Volume cm³
Connection
Max Operating Bar
160
1/2” M BSP
200
MS160C
Price
DS Accumulator
Part No
Model
Volume cm3
Max Operating Bar
00.4136
DS270/24
270
24
00.1586
DS270/46
270
46
00.1587
DS800/24
800
24
00.1588
DS800/64
800
64
www.speck.co.uk
Price
tel: 01494 523203
Page 19
Guns
Guns
The range of guns stocked at SPECK aims to cover all of your requirements.
We are able to offer guns with flows up to 200 l/min (44 gpm) and pressures up to 600 bar (8700 psi)
For our most popular ranges of guns and lances we are able to offer a bulk buy discount when they are ordered in boxed
quantities.
All guns are supplied with a trigger lock to ensure that guns cannot be operated inadvertently.
RL20
Rated Pressure
Rated Flow
Rated Temperature
Part No
30.0100.00
200 Bar
30 l/min
160°C
2900 psi
6.6 gpm
320°F
Outlet
Price
Inlet
1/4" F BSP
1/4" F BSP
RL20 With Lance
Performance as RL20 gun with a 700mm insulated lance
Part No
12.203
Inlet
Outlet
1/4" F BSP
Price
1/4" F BSP
RL37
Rated Pressure
Rated Flow
Rated Temperature
Part No
30.1200.00
310 Bar
40 l/min
160°C
4500 psi
8.8 gpm
320°F
Outlet
Price
Inlet
3/8" F BSP
1/4" F BSP
RL20 • RL37 • EUROGUN • SPECK STAR • SPECK 100 • RL56 • NOVA 400 • RL600 • RL84 • RL124 • RL204 • RB65
Page 20
fax: 01494 441542
[email protected]
Guns
Eurogun
Rated Pressure
Rated Flow
Rated Temperature
Part No
12.210
12.210
Inlet
3/8" F BSP
250 Bar
40 l/min
160°C
3625 psi
8.8 gpm
320°F
Outlet
Price
1/4" F BSP
Buy In multiples of 40 to receive special price of
Speck Star
Rated Pressure
Rated Flow
Rated Temperature
Part No
12.320
12.320S
Inlet
310 Bar
40 l/min
160°C
4500 psi
8.8 gpm
320°F
Outlet
Price
3/8" F BSP
1/4" F BSP
3/8" F Swivel BSP
1/4" F BSP
12.320
12.320S
Speck Star With 450mm Lance
Performance as SPECK Star gun with a 450mm insulated lance
Part No
12.321
12.321S
Inlet
Outlet
3/8" F BSP
1/4" F BSP
3/8" F Swivel BSP
1/4" F BSP
Price
www.speck.co.uk
tel: 01494 523203
Page 21
Guns
SPECK 100
Rated Pressure
Rated Flow
Rated Temperature
Part No
12.230
250 Bar
40 l/min
150°C
3625 psi
8.8 gpm
300°F
Outlet
Price
Inlet
3/8" F BSP
1/4" F BSP
Vega Stainless Steel
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
30.3150.00
250 Bar
3625 psi
40 l/min
8.8 gpm
160°C
320°F
303 Stainless Steel
Inlet
Outlet
3/8" F BSP
Price
1/4" F BSP
RL56
Rated Pressure
Rated Flow
Rated Temperature
Part No
30.4500.00
350 Bar
30 l/min
160°C
5075 psi
6.6 gpm
320°F
Outlet
Price
Inlet
3/8" F BSP
1/4" F BSP
30.4520.00 3/8" F swivel BSP
1/4" F BSP
Page 22
fax: 01494 441542
[email protected]
Guns
Nova 400
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
30.5650.00
Inlet
3/8" F BSP
400 Bar
5800 psi
40 l/min
8.8 gpm
160°C
320°F
303 Stainless Steel
Outlet
Price
1/4" F BSP
RL84
Rated Pressure
Rated Flow
Rated Temperature
Part No
12.300
Inlet
1/2" F BSP
500 Bar
80 l/min
100°C
7250 psi
17.6 gpm
210°F
Outlet
Price
1/2" F BSP
RL600 Stainless Steel
Rated Pressure
Rated Flow
Rated Temperature
Part No
Inlet
600 Bar
60 l/min
100°C
8700 psi
13.2 gpm
210°F
Outlet
Price
30.5800.00
3/8" BSPF
3/8" BSPF
30.5820.00
3/8" BSPF
3/8" BSPF
Magnetic reed switch 0.5A, 48V AC/DC
P= 10VA 2M Cable
new
www.speck.co.uk
tel: 01494 523203
Page 23
Guns
RL124
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
30.5300.00
120 Bar
120 l/min
100°C
Zinc Plated Steel
Inlet
Outlet
1/2" F BSP
1450 psi
22.0 gpm
210°F
Price
1/2" F BSP
RL204
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
30.5200.00
200 Bar
2900 psi
200 l/min
44.1 gpm
100°C
210°F
Brass and Stainless Steel
Inlet
Outlet
3/4" F BSP
Price
1/2" F BSP
RB65 Washdown Gun
For Food / Process Industry
Rated Pressure
Rated Flow
Rated Temperature
Part No
24 Bar
60 l/min
90°C
Inlet
348 psi
13.2 gpm
195°F
Outlet
Price
30.6400.00
1/2" F BSP
1/2" F BSP
30.6300.00*
1/2” F BSP
1/2” F BSP
* Stainless Steel AISI 316
new
RL20 • EUROGUN • SPECK STAR • SPECK 100 • RL56 • NOVA 400 • RL600 • RL84 • RL124 • RL204 • RB65
Page 24
fax: 01494 441542
[email protected]
Lances
Standard Lances - Moulded Hand Grip
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
250 Bar
3625 psi
40 l/min
8.8 gpm
160°C
320°F
Zincum Plated Steel
Length mm
Single Price
Boxed Quantity
12.418
300
25
12.4185
450
25
12.419
700
25
12.420
900
25
12.422
1200
25
12.4313
1500
10
99.070
2000
10
Boxed Price ea
Stainless Steel Lances - Moulded Hand Grip
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
250 Bar
40 l/min
160°C
Stainless Steel
Length mm
40.7460.22
450
40.7710.22
700
40.9010.22
900
40.8215.22
1200
3625 psi
8.8 gpm
320°F
Single Price
Stainless Steel Lances - S3 350
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
40.0261.00
350 Bar
30 l/min
160°C
Stainless Steel
Length mm
5100 psi
6.6 gpm
320°F
Single Price
1050
www.speck.co.uk
tel: 01494 523203
Page 25
Lances
Twin Lance
Rated Pressure
Rated Flow
Rated Temperature
Part No
250 Bar
40 l/min
160°C
Length mm
12.131B
3625 psi
8.8 gpm
320°F
Price
1090
Twin Lance
New design with concentric tubes
Rated Pressure
250 Bar
Rated Flow
40 l/min
Rated Temperature
160°C
Part No
new
41.0310.00
Length mm
3625 psi
8.8 gpm
320°F
Price
1113
Lance For RL84, RL124, RL204
Rated Pressure
Rated Flow
Rated Temperature
Part No
500 Bar
160 l/min
100°C
Length mm
12.305
400
12.306
800
30.5000.92
1250
7250 psi
35.2gpm
210°F
Price
Lance For Nova 400
Page 26
fax: 01494 441542
[email protected]
Lances
Lance For Nova 400
Rated Pressure
Rated Flow
Rated Temperature
Part No
40.0240.00
400 Bar
40 l/min
160°C
Length mm
5800 psi
8.8 gpm
320°F
Single Price
1200
S6 - RL600 Stainless Lance
Lance for RL600 gun. Inlet 3/8”BSPM Outlet 1/4”NPT
Rated Pressure
600 Bar
8700 psi
Rated Flow
60 l/min
13.2 gpm
Rated Temperature
100°C
210°F
Material
Stainless Steel
Part No
Length mm
40.0160.12
1200
40.0160.80
800
Price
new
Stainless Steel Lance Tube
A stainless steel tube with 1/4" threads on either end.
Rated Pressure
250 Bar
3625 psi
Rated Flow
40 l/min
8.8 gpm
Rated Temperature
160°C
320°F
Material
Stainless Steel
Part No
Length mm
40.0501.56
300
40.9011.56
900
Price
Lance with Adjustable nozzle
A short lance with an SP30 Type coupling on one end,
and a variable nozzle on the other
Jet Size
03 Nozzle Size
Part No
99.075
Length mm
Price
350
www.speck.co.uk
tel: 01494 523203
Page 27
Turbo Nozzles
TN220 Turbo Nozzle
Spinning Jet giving cleaning power of a pencil jet with the
convenience of a fan jet.
Rated Pressure
220 Bar
3190 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
90°C
194°F
Spray Angle
20°
Inlet Connection
1/4" F
Part No
Nozzle Size
Price
Part No
Nozzle Size
13.2470
03
13.2475a
065
13.2471
04
13.2476
07
13.2472
045
13.2477
08
13.2473
05
13.2478
09
13.2474
055
13.2479
10
13.2475
06
13.2479a
12
Price
Repair kits are available for all of the above turbo nozzles, £35.00 ea.
TN350 Turbo Nozzle
Spinning Jet giving cleaning power of a pencil jet with the
convenience of a fan jet.
Rated Pressure
350 Bar
5075 psi
Rated Flow
46 l/min
10.1 gpm
Rated Temperature
90°C
194°F
Spray Angle
20°
Inlet Connection
1/4" F
Part No
Nozzle Size
Price
Part No
Nozzle Size
13.2374
03
13.2379
065
13.2376
04
13.236
07
13.2360
045
13.238
08
13.2377
05
13.238
09
13.2362
055
13.238
10
13.2378
06
13.238
12
Price
Repair kits are available for all of the above turbo nozzles £35.15 ea.
NOZZLES • PRESSURE GAUGES• HOSE REELS • FLOOR CLEANERS• BRUSHES • FOAM LANCES
Page 28
fax: 01494 441542
[email protected]
Turbo Nozzles
TN500 Turbo Nozzle
Spinning Jet giving cleaning power of a pencil jet with the convenience of a fan jet.
Rated Pressure
500 Bar
7250 psi
Rated Flow
60 l/min
10.1 gpm
Rated Temperature
90°C
194°F
Spray Angle
20°
Inlet Connection
1/4" F
Part No
Nozzle Size
Price
Part No
Nozzle Size
13.2701
03
13.2707
07
13.2702
04
13.2707a
075
13.2703
045
13.2708
08
13.2704
05
13.2709
09
13.2705
055
13.2710
10
13.2706
06
13.2711
12
13.2706a
065
Price
TN1000 Turbo Nozzle
Spinning Jet giving cleaning power of a pencil jet with the convenience of a fan jet.
Rated Pressure
1000 Bar
14500 psi
Spray Angle
20°
Inlet Connection
1/4" F
Part No
Nozzle Size
Price
Part No
Nozzle Size
13.5003
018
13.2397
06
13.2390
02
13.2398
065
13.2391
03
13.2399
07
13.2392
035
13.5000
075
13.2393
04
13.5005
08
13.2394
045
13.5006
09
13.2395
05
13.5007
10
13.2396
055
Price
SIPHON INJECTORS • ANCILLARIES • PRESSURE SWITCHES • FILTERS • COUPLINGS • SWIVELS • TOOLS
www.speck.co.uk
tel: 01494 523203
Page 29
Nozzles
Small Rotating Nozzle
Rated Pressure
Rated Flow
Rated Temperature
Part No
Nozzle Size
13.2120
350 Bar
30 l/min
80°C
5075 psi
6.6 gpm
175°F
Inlet Connection
Price
03 - 09
1/4" M BSP
Large Rotating Nozzle
Rated Pressure
Rated Temperature
Part No
25.1150.11
Nozzle Size
500 Bar
80°C
7250 psi
175°F
Inlet Connection
Price
06, 07 and 08
1/2" F BSP
Nozzles
A wide range of high quality nozzles available
Available with 1/4" NPT thread in 0°, 15°, 25° and 40° Spray Angles
Hole Sizes available - 02 through to 30
Part No
Price
34.0045
Retro Jets
Available as 1/4", 3/8" and 1/2" BSP
From
NOZZLES • PRESSURE GAUGES• HOSE REELS • FLOOR CLEANERS• BRUSHES • FOAM LANCES
Page 30
fax: 01494 441542
[email protected]
Nozzles
Adjustable Nozzle
An adjustable nozzle suitable for lowering pressure to enable
use of siphon injectors. Use with standard nozzle for high pressure.
Rated Pressure
250 Bar
3625 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
160° C
320°F
Part No
13.201
Inlet
Outlet
1/4" F BSP
Price
1/4" F NPT
Large Adjustable Nozzle
A larger version of the adjustable nozzle with larger plastic shroud.
Rated Pressure
250 Bar
3625 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
160° C
320°F
Part No
99.063
Inlet
Outlet
1/4" F BSP
Price
1/4" F NPT
Rollover Nozzle
Rated Pressure
Rated Flow
Rated Temperature
Part No
200 Bar
40 l/min
90°C
2900 psi
8.8 gpm
194°F
Outlet
Price
Inlet
13.204
1/4" F BSP
2 x 1/4" F NPT
13.205
1/4" F BSP
2 x 1/8" F NPT
Nozzle Protector
Plastic nozzle protector for use on the end of lances with nozzle ferrules.
Part No
Price
40.0020.00
www.speck.co.uk
tel: 01494 523203
Page 31
Nozzles
Nozzle Ferrule
Part No
Inlet Connection
Outlet Connection
Price
13.287
1/4" F BSP
1/4" F NPT
13.287 3*
1/4” F BSP
1/4” F NPT
*Stainless Steel
Variable Nozzle
Allows varying spray angles to be used.
Rated Pressure
250 Bar
Rated Flow
40 l/min
Rated Temperature
80°C
Part No
Nozzle Size
13.200
3625 psi
8.8 gpm
175°F
Inlet Connection
03 - 12
Price
1/4" F BSP
Sand Blasting Head
Rated Pressure
Rated Flow
Rated Temperature
Part No
25.0000.10
25.0000.12
25.0000.14
25.0000.15
25.0000.16
25.0000.18
25.0000.20
Nozzle Size
250 Bar
40 l/min
90°C
3625psi
8.8 gpm
195°F
Inlet Connection
Price
02
03
040
045
05
075
085
1/4" F BSP
1/4" F BSP
1/4" F BSP
1/4" F BSP
1/4" F BSP
1/4" F BSP
1/4" F BSP
Sand Blaster Head TS12
Flat Spray Pattern
Rated Pressure
500 Bar
Rated Flow
80 l/min
Rated Temperature
90°C
15° Tungsten Carbide inserts must be used
new
Part No
25.0450
Inlet Connection
7250psi
17.6 gpm
195°F
Price
1/4” F BSP
NOZZLES • PRESSURE GAUGES • HOSE REELS • FLOOR CLEANERS• BRUSHES • FOAM LANCES
Page 32
fax: 01494 441542
[email protected]
Pressure Gauges
Rear Entry Pressure Gauge Ø63mm
Part No
Pressure Range Pressure Range
Connection
13.0035.16
0 - 160 Bar
0 - 2320 psi
1/4" M BSP
13.0035.25
0 - 250 Bar
0 - 3625 psi
1/4" M BSP
13.0035.31
0 - 315 Bar
0 - 4880 psi
1/4" M BSP
13.0035.40
0 - 400 Bar
0 - 5800 psi
1/4" M BSP
Price
Bottom Entry Pressure Gauge Ø63mm
Part No
Pressure Range Pressure Range
Connection
13.0025.16
0 - 160 Bar
0 - 2320 psi
1/4" M BSP
13.0025.25
0 - 250 Bar
0 - 3625 psi
1/4" M BSP
13.0025.31
0 - 315 Bar
0 - 4880 psi
1/4" M BSP
13.0025.40
0 - 400 Bar
0 - 5800 psi
1/4" M BSP
Price
3 Hole Plastic Flange
Part No
Price
13.0044.00
to convert standard pressure guages to panel mount
www.speck.co.uk
tel: 01494 523203
Page 33
Hose Reels
Powered Tank Cleaning Head
Rated Pressure
Rated Flow
Rated Temperature
Electric Motor
Nozzle
Complete with mains adaptor
Part No
220 Bar
21 l/min
90°C
12V, 12W
2 x M4
3190 psi
4.6 gpm
175°F
Width
25.4300.00
Price
550 mm
Plastic Hose Reel T26
Hose Diameter
Rated Pressure
Rated Temperature
Part No
Hose Length
29.0720.00
20 mm
250 Bar
160°C
3/8"
3650 psi
320°F
Hose Length
Price
20 m
22 yd
Aluminium Hose Reel T52, T53
Rated Pressure T52
Rated Pressure T53
Rated Temperature
300 Bar
200 Bar
150°C
Part No
Type
Inlet Outlet
29.0360.00
29.0375.00
T52
T53
3/8F
1/2
4350 psi
3000 psi
300°F
Hose Length
Hose Dia
80M
58M
16.8
19.5
3/8M
1/2M
Price
new
NOZZLES • PRESSURE GAUGES • HOSE REELS • FLOOR CLEANERS • BRUSHES • FOAM LANCES
Page 34
fax: 01494 441542
[email protected]
Floor Cleaners
Small Stainless Steel Floor Cleaner
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
Width
250 Bar
20 l/min
160°C
Stainless Steel
Width
3625 psi
4.4 gpm
320°F
Price
29.0600
410 mm
16 in
29.0625
610 mm
24 in
LPR6 Rotary Stainless Steel Floor Cleaner
Stainless Steel floor cleaner with two rotating jets.
Rated Pressure
250 Bar
Rated Flow
40 l/min
Minimum Flow
16 l/min
Rated Temperature
80°C
Material
Stainless Steel
Part No
29.0680
Width
Width
460 mm
Takes 1/4" NPT Nozzles (2 required).
3625 psi
8.8 gpm
3.5 gpm
175°F
Price
18 in
LPR8 Rotary Stainless Steel Floor Cleaner
Stainless Steel floor cleaner with two rotating jets.
Rated Pressure
350 Bar
Rated Flow
30 l/min
Minimum Flow
16 l/min
Rated Temperature
80°C
Material
Stainless Steel
Part No
29.0700
Width
450 mm
Width
Takes 1/4" NPT Nozzles (2 required).
5075 psi
6.6 gpm
3.5 gpm
175°F
Price
17.7 in
www.speck.co.uk
tel: 01494 523203
Page 35
Floor Cleaners
Chewing Gum Remover
new
Uses an advanced jet configuration of 18 ultra fine ceramic jets.
Used for spot removal of chewing gum without the need to use hot
water - optimised for 180 bar.
Rated Pressure
150-250 Bar
2175-3625 psi
Rated Temperature
90°C
195°F
Part No
13.6060
Nozzle Size
Price
03, 04, 05, 055, 065
Hydroboom PP Floor Cleaner
new
Uses a two dimensional turbo nozzle to give superior cleaning results
with minimum mess.
Rated Pressure
210 Bar
3045 psi
Rated Flow
18 l/min
4gpm
Rated Temperature
90°C
195°F
Part No
13.6000
Width
Nozzle Size
310mm (12 /4”)
Price
04,045,05,055
1
Supplied with spare floor sliders.
FOR LIGHT, INTERMITTENT DUTY ONLY
Hydroboom PPB Floor Cleaner
new
Uses a two dimensional turbo nozzle to give superior cleaning results
with minimum mess. Has part stainless canopy with wheels and a
rotating brush for a better clean.
Rated Pressure
210 Bar
3045 psi
Rated Flow
18 l/min
4gpm
Rated Temperature
90°C
195°F
Part No
13.6030
Width
Nozzle Size
320mm (12 /2”)
1
Price
04,045,05,055
FOR LIGHT, INTERMITTENT DUTY ONLY
Page 36
fax: 01494 441542
[email protected]
Brushes
Foam Lance Assembly Complete
With Roll Over Nozzle
Allows High Pressure Jetting, and Foaming from a single lance.
Rated Pressure
140 Bar
2030 psi
Rated Flow
25 l/min
5.5 gpm
Rated Temperature
65°C
150°F
Nozzle
Connections
1.5 mm
Price
1/4" M BSP
Small Brush
Rated Pressure
Rated Flow
Rated Temperature
Part No
5 Bar
12 l/min
40°C
72 psi
2.6 gpm
104°F
5 Bar
12 l/min
40°C
72 psi
2.6 gpm
104°F
30 Bar
30 l/min
60°C
435 psi
6.6 gpm
140°F
Connections
Price
Price
29.0561
Large Brush
Rated Pressure
Rated Flow
Rated Temperature
Part No
Price
29.0562
Rotating Brush
Rated Pressure
Rated Flow
Rated Temperature
Part No
13.337
13.337a
Brush
Artificial
1/4" M BSP
Horse Hair
1/4" M BSP
www.speck.co.uk
tel: 01494 523203
Page 37
Foam Lances
Foam Injector LS10
Rated Pressure
Rated Flow
Rated Temperature
Part No
new
25.1860.15
Nozzle
200 Bar
25 l/min
60°C
2900 psi
5.5 gpm
140°F
Connections
Price
1.5 mm
3/8" M BSP
Foam Injector With 1ltr Tank LS10
Rated Pressure
Rated Flow
Rated Temperature
new
Part No
Nozzle
200 Bar
25 l/min
60°C
2900 psi
5.5 gpm
140°F
Connections
Price
25.1865.15
1.5 mm
with adjustable flow
3/8" M BSP
LS10 with 2L tank as above
25.1868.15
3/8" M BSP
Foam Lance With External Injector
Rated Pressure
Rated Flow
Rated Temperature
Part No
Nozzle
200 Bar
25 l/min
60°C
2900 psi
5.5 gpm
140°F
Connections
Price
25.1850.18
1.8 mm
3/8" M BSP
25.1850.21
2.1 mm
3/8" M BSP
Foam Injector With 1ltr Bottle LS12
Available with 1.5 and 2.1 mm nozzle.
Rated Pressure
200 Bar
Rated Flow
25 l/min
Rated Temperature
60°C
new
Part No
Nozzle
2900 psi
5.5 gpm
140°F
Connections
Price
25.1820.15
1.5 mm
1/4" BSP F
25.1820.21
2.1 mm
1/4" BSP F
Page 38
fax: 01494 441542
[email protected]
Siphon Injectors
Siphon Injectors
These are used to introduce chemical into the high pressure side of the system. When jetting at high pressure no chemical
is introduced. When the pressure is reduced to approx 25-30 bar chemical is introduced into the water flow. The pressure
is normally dropped using an adjustable nozzle, or a twin lance with large jet (typically a 4030).
The orifice size required is chosen by pump performance, typically:-
Pump Flow (l/min)
Orifice size (mm)
9-11
1.8
11-13
2.1
15-18
2.3
Ø 1.2 mm orifices are also available for specialist applications.
Fixed Siphon Injectors
All Siphon Injectors are available with 1.8, 2.1 and 2.3 mm orifices.
Rated Pressure
220 Bar
3190 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
90°C
195°F
Part No
Inlet
Outlet
21.0015.23
3/8" F BSP
3/8" M BSP
21.0020.00
3/8" M BSP
3/8" F BSP
21.0000.00
3/8" M BSP
3/8" M BSP
Price
Stainless Steel
Fixed Siphon Injectors
Rated Pressure
Part No
21.0018.21
Inlet
3/8" M BSP
350 Bar
5075 psi
Outlet
Price
3/8" M BSP
www.speck.co.uk
tel: 01494 523203
Page 39
Siphon Injectors
Adjustable Siphon Injectors
All Siphon Injectors are available with 1.8, 2.1 and 2.3 mm orifices.
Rated Pressure
220 Bar
3190 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
90°C
195°F
Part No
Inlet
Outlet
Price
21.0175.00
3/8" M BSP
3/8" F BSP
21.0150.02
3/8" M BSP
3/8" M BSP
Stainless Steel Adjustable Siphon
Injectors
Rated Pressure
Part No
21.0119
350 Bar
5075 psi
Outlet
Price
Inlet
3/8" M BSP
3/8" M BSP
Specialist Siphon Injectors
Available with 1.8 or 2.1mm orifice.
Siphon Injector with SP30 type M22 coupling
to M22.
Rated Pressure
Rated Flow
Rated Temperature
Part No
220 Bar
30 l/min
90°C
3190 psi
6.6 gpm
195°F
Outlet
Price
Inlet
21.0035.18
SP30
3/8" M BSP
21.0035.21
SP30
3/8” M BSP
Siphon Injector to replace outlet port of
UL180 unloader.
Available with 1.8, 2.1 or 2.3mm orifice.
Part No
13.216
Type
Inlet
Outlet
Fixed
UL180
M22 M BSP
13.2256
Adjustable
UL180
3/8" M BSP
13.2265
Adjustable
UL180
M21 M BSP
13.2276
Adjustable
UL180
M22 M BSP
Price
Page 40
fax: 01494 441542
[email protected]
Ancillaries
Inlet Venturi
For siphoning chemical on the low pressure side of the pump.
Has two 1/8" BSP connections on side.
Rated Pressure
22 Bar
319 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
90°C
195°F
Part No
21.0300.61
Inlet
3/4" M BSP
Outlet
Price
1/2" F BSP
Chemical Regulator RD3
Suitable for panel fitting in 15mm hole.
Rated Pressure
28 Bar
Rated Flow
10 l/min
Rated Temperature
40°C
Part No
99.048
Inlet
1/4" Hose Barb
Outlet
406 psi
2.2 gpm
105°F
Price
1/4" Hose Barb
Chemical Regulator RD5
Suitable for panel fitting in 15mm hole. Plate calibrated 0-10
Rated Pressure
28 Bar
406 psi
Rated Flow
10 l/min
2.2 gpm
Rated Temperature
40°C
105°F
Part No
Inlet
29.0980.00
1/4" Hose Barb
Outlet
new
Price
1/4" Hose Barb
Chemical Regulator 90° RDY
Suitable for panel fitting in 17 mm hole.
Rated Pressure
28 Bar
Rated Flow
10 l/min
Rated Temperature
40°C
Part No
29.0954
Inlet
1/4" Hose Barb
Outlet
406 psi
2.2 gpm
105°F
Price
1/4" Hose Barb
www.speck.co.uk
tel: 01494 523203
Page 41
Ancillaries
Steam Valve
Suitable for panel fitting in 17 mm hole.
Rated Pressure
250 Bar
Rated Temperature
80°C
Part No
99.054
Inlet
3625 psi
175°F
Outlet
1/4" M BSP
Price
1/4" M BSP
Please State Orifice size when ordering
Ø 1.2 mm orifice for 13 l/min pumps
Ø 1.5 mm orifice for 15 l/min pumps
Non Return Valve
Rated Pressure (Brass)
Rated Pressure (SS)
Rated Temperature
Part No
150 Bar
400 Bar
90°C
Inlet
2175 psi
5800 psi
195°F
Outlet
Material
60.2040.00
1/4" F BSP
1/4" F BSP
Brass
60.2050.00
3/8" F BSP
3/8" F BSP
Brass
60.2065.00
1/2" F BSP
1/2" F BSP
Brass
60.2030.00
1/4" F BSP
1/4" F BSP
Stainless
60.2020.00
3/8" F BSP
3/8" F BSP
Stainless
60.2070.00
1/2" F BSP
1/2" F BSP
Stainless
Price
Easy Starter
Allows easy starting of pumps on petrol/diesel engines
Rated Pressure
280 Bar
4060 psi
Rated Flow
30 l/min
6.6 gpm
Rated Temperature
80°C
175°F
Part No
29.0100.50
Inlet
Outlet
3/8" M BSP
Material
Hose Barb
Price
Brass
RPM Decelerator
Slows engine rpm whilst pump is on bypass.
Rated Pressure
250 Bar
Min Pressure
15 Bar
Rated Temperature
160°C
Part No
29.0130.00
Inlet
3625 psi
217 psi
320°F
Stroke
1/4" M BSP
Price
14mm
Page 42
fax: 01494 441542
[email protected]
Ancillaries
Thermal Protector Valve
Use with gravity or pressure fed systems only.
Rated Pressure
10 Bar
Part No
Inlet
Outlet
145 psi
Price
60.0630.00
1/4" M BSP
7mm Hose Barb
60.0630.50
3/8" M BSP
7mm Hose Barb
60.0630.70
1/2" M BSP
7mm Hose Barb
Thermostat with probe housing
Voltage Max
Current Max
Part No
240 V
15A
Coil Length
99.069
Temp Max
900 mm
120°C
Probe Size
Price
6.5 x 95 mm
Flow Regulator
Rated Pressure
Min Pressure
Rated Flow
Rated Temperature
Part No
12.325
Inlet
1/4" M BSP
250 Bar
40 Bar
30 l/min
160°C
3625 psi
280 psi
6.6 gpm
320°F
Outlet
Price
1/4" F BSP
Flow Switch
Voltage Max
Current Max
Insulation Class
Power
Rated Pressure
Rated Flow
Rated Temperature
Part No
13.351
Inlet
3/8" M BSP
250 V
1A
IP55
50 VA
250 Bar
30 l/min
80°C
3625 psi
6.6 gpm
175°F
Outlet
Price
3/8" M BSP
www.speck.co.uk
tel: 01494 523203
Page 43
Pressure Switches
PR5 - Pressure Switch
Rated Pressure
Rated Temperature
Max Voltage
Max Current
Insulation Class
Pressure Switches Available in
psi) Versions
Part No
29.0080.00
Inlet
250 Bar
3625 psi
90°C
195°F
250 V
5A
IP55
15, 25 and 40 Bar (218, 362 and 580
Material
1/4" M BSP
Price
Brass
Rated Pressure
Rated Temperature
Max Voltage
Max Current
Insulation Class
Pressure Switches Available in
Versions
Part No
Inlet
250 Bar
3625 psi
75°C
165°F
250 V
15A
IP55
25 and 40 Bar (362 and 580 psi)
Material
Price
12.632
1/4" M BSP
Brass
12.632
1/4" M BSP
Stainless
12.632
3/8" M BSP
Brass
12.632
3/8" M BSP
Stainless
Rated Pressure
400 Bar
5800 psi
Rated Temperature
90°C
195°F
Max Voltage
250 V
Max Current
15A
Insulation Class
IP55
Pressure Switch Only Available in 45 Bar (653 psi) Version
Part No
29.0000.00
Inlet
Material
3/8" M BSP
Price
Stainless
Page 44
fax: 01494 441542
[email protected]
Filters
Chemical Plastic Intake Strainer
Chemical Strainer with 7mm hose barb.
Part No
Description
Price
99.001
Without Non Return Valve
99.002
With Non Return Valve
1/2" Inlet Barb With Filter
Part No
28.0040.00
Description
Price
1/2" BSP M BSP
Chemical Intake
With Non Return Valve
Part No
28.0050.00
Description
Price
7mm Hose Barb
Float Tank Inlet Filter
Part No
28.0055.00
Description
Price
3/8" M BSP Inlet
www.speck.co.uk
tel: 01494 523203
Page 45
Filters
Y Filter
Part No
13.299
Description
Price
1/2" BSP Inline Brass Y Filter
Plastic Intake Strainer With Hose
Barb
Rated Pressure
Rated Temperature
Part No
99.064
6 Bar
40°C
Description
145 psi
104°F
Price
Inlet Strainer
With 19mm Hose Barb
Plastic Inline Inlet Filter With
Bypass Port
Rated Pressure
Rated Flow
Part No
28.0350
10 Bar
30 l/min
145 psi
6.6 gpm
Outlet
Price
Inlet
1/2" M BSP
1/2" F BSP
Aluminium Inline Inlet Filter With
Bypass Port
Part No
13.301
Inlet
1/2" M BSP
Outlet
Price
1/2" F BSP
Page 46
fax: 01494 441542
[email protected]
Couplings
Couplings And Fittings
At SPECK Pumps (UK) Ltd we are pleased to be able to offer a wide range of couplings and fittings to enable you to
connect your equipment together.
We offer a comprehensive collection of couplings, converters and swivels to 1/2” diameter.
We are able to offer couplings, swivels and converters with flow rates up to 160 l/min and pressures up to 350 bar.
SP30 Screw Type Coupling
And Nipple (AR1)
Rated Pressure
Rated Flow
Rated Temperature
250 Bar
40 l/min
160°C
Part No
Inlet
3625 psi
8.8 gpm
320°F
Outlet
B Coupling
13.361
1/4” F BSP
M22 x 1.5 F
B Coupling
13.362
1/4” M BSP
M22 x 1.5 F
B Coupling
13.363
3/8” F BSP
M22 x 1.5 F
B Coupling
13.364
3/8” M BSP
M22 x 1.5 F
A Nipple
13.366
1/4” F BSP
M22 x 1.5 M
A Nipple
13.370
1/4” M BSP
M22 x 1.5 M
A Nipple
13.367
3/8” F BSP
M22 x 1.5 M
A Nipple
13.368
3/8” M BSP
M22 x 1.5 M
Price
e
e
d
d
SP30 Screw Type
2 Part Coupling (AR1)
Compact 2 part version of SP30 coupling.
Rated Pressure
250 Bar
Rated Flow
40 l/min
Rated Temperature
160°C
Part No
Inlet
3625 psi
8.8 gpm
320°F
Outlet
B Coupling
26.0150.20
1/4” F BSP
M22 x 1.5 F
B Coupling
26.0150.30
1/4” M BSP
M22 x 1.5 F
B Coupling
26.0150.40
3/8” M BSP
M22 x 1.5 F
Price
e
e
www.speck.co.uk
tel: 01494 523203
Page 47
Couplings
AR3 Screw Type Coupling
And Nipple
Hexagonal spigot prevents coupling rotating.
Rated Pressure
250 Bar
Rated Flow
40 l/min
Rated Temperature
160°C
Part No
e
d
Inlet
3625 psi
8.8 gpm
320°F
Outlet
B Coupling
26.0205.00
1/4” F BSP
M22 x 1.5 F
A Nipple
26.0200.31
1/4” F BSP
M22 x 1.5 M
Price
And Nipple - 2 O Rings
Rated Pressure
Rated Flow
Rated Temperature
250 Bar
40 l/min
160°C
Part No
d
d
Inlet
3625 psi
8.8 gpm
320°F
Outlet
B Coupling
26.1029.00
1/4” M BSP
M22 x 1.5 F
B Coupling
26.1028.00
1/4” F BSP
M22 x 1.5 F
A Nipple
26.1032.31
1/4” F BSP
M22 x 1.5 M
A Nipple
26.1020.31
1/4” M BSP
M22 x 1.5 M
Price
e
And Nipple
With 11mm diameter spigot.
Rated Pressure
Rated Flow
Rated Temperature
250 Bar
40 l/min
160°C
Part No
e
d
Inlet
3625 psi
8.8 gpm
320°F
Outlet
B Coupling
26.0750.40
3/8” F BSP
1/2” x 1.5 F
A Nipple
26.0700.20
1/4” F BSP
1/2” x 1.5 M
A Nipple
26.0700.40
3/8” F BSP
1/2” x 1.5 M
Price
Page 48
fax: 01494 441542
[email protected]
Couplings
AR 8 Screw Type Coupling
And Nipple
Rated Pressure
Rated Flow
Rated Temperature
350 Bar
30 l/min
160°C
Part No
5075 psi
6.6 gpm
320°F
Inlet
Outlet
B Coupling
26.0650.30
1/4” M BSP
M24 x 1.5 F
B Coupling
26.0650.50
3/8” M BSP
M24 x 1.5 F
A Nipple
26.0630.20
1/4” F BSP
M24 x 1.5 M
A Nipple
26.0630.40
3/8” F BSP
M24 x 1.5 M
Price
d
e
SP20 Quick Release Coupling
And Nipple (ARS 250)
Rated Pressure
Rated Flow
Rated Temperature
250 Bar
30 l/min
90°C
Part No
3625 psi
6.6 gpm
195°F
Inlet
Outlet
B Coupling
13.250
1/4” F BSP
QR Fitting
B Coupling
13.251
3/8” F BSP
QR Fitting
B Coupling
13.252
3/8” M BSP
QR Fitting
B Coupling
13.253
1/2” M BSP
QR Fitting
A Nipple
13.256
1/4” F BSP
Spigot
A Nipple
13.257
3/8” F BSP
Spigot
A Nipple
13.258
3/8” M BSP
Spigot
Price
e
e
d
d
ARS 220 Quick Release Coupling And Nipple
Rated Pressure
Rated Flow
Rated Temperature
220 Bar
50 l/min
90°C
Part No
3190 psi
11 gpm
195°F
Inlet
Outlet
B Coupling
26.2030.00
3/8” F BSP
QR Fitting
A Nipple
26.2035.61
3/8” F BSP
Spigot
Price
d
e
www.speck.co.uk
tel: 01494 523203
Page 49
Couplings
ARS 350 Quick Release Coupling
And Nipple
Rated Pressure
Rated Flow
Rated Temperature
Material
350 Bar
50 l/min
90°C
Stainless Steel
Part No
e
d
Inlet
5075 psi
11 gpm
195°F
Outlet
B Coupling
26.2050.00
3/8” F BSP
QR Fitting
A Nipple
26.2035.51
3/8” F BSP
Spigot
Price
Low Pressure Nito/Dyros
Couplings
Rated Pressure
Rated Temperature
Material
Part No
d
e
25 Bar
362 psi
80°C
180°F
Chrome Plated Brass
Inlet
Outlet
Price
B Coupling
E0002
1/2” or 3/4” F BSP
QR Fitting
A Nipple
E0003
QR Fitting
Double Step 1/2” and 3/8” Nipple
A Nipple
E0006
QR Fitting
1” Nipple
B Coupling
E0007
1” FBSP
QR Fitting
A Nipple
E0008
3/4” M BSP
Double Step 1/2” and 3/8” Nipple
Connectors
Rated Pressure
Rated Flow
Rated Temperature
Part No
250 Bar
40 l/min
160°C
3625 psi
8.8 gpm
320 °F
Outlet
Price
Inlet
13.281
1/4” M BSP
1/4” M BSP
13.282
1/4” M BSP
3/8” M BSP
13.283
3/8” M BSP
3/8” M BSP
13.5030.00
3/8” M BSP
1/2” M BSP
Page 50
fax: 01494 441542
[email protected]
Swivels
LR - Lightweight Swivel
Rated Pressure
Rated Flow
Rated Temperature
Part No
13.289
Inlet
3/8” F BSP
220 Bar
30 l/min
90°C
3190 psi
6.6 gpm
195°F
Outlet
Price
3/8” M BSP
SW5 - Stainless Steel Swivel
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
26.1070.00
Inlet
1/2” F BSP
200 Bar
160 l/min
80°C
Stainless Steel
Outlet
2900 psi
35.2 gpm
175°F
Price
1/2” M BSP
www.speck.co.uk
tel: 01494 523203
Page 51
Swivels
MR-0 - Brass Swivel
Rated Pressure
Rated Flow
Rated Temperature
Part No
250 Bar
40 l/min
160°C
3625 psi
8.8 gpm
320°F
Outlet
Price
Inlet
26.1040.00
1/4” F BSP
1/4” M BSP
26.0150.00
3/8” F BSP
3/8” M BSP
26.1055.00
1/2” F BSP
1/2” M BSP
MR-1 - Stainless Steel Swivel
Rated Pressure
Rated Flow
Rated Temperature
Part No
350 Bar
40 l/min
160°C
5075 psi
8.8 gpm
320°F
Outlet
Price
Inlet
26.1060.00
1/4” F BSP
1/4” M BSP
26.1061.00
3/8” F BSP
3/8” M BSP
SW90 - 90° Swivel
Rated Pressure
Rated Flow
Rated Temperature
Material
Part No
250 Bar
40 l/min
90°C
Stainless Steel
Inlet
3625 psi
8.8 gpm
195°F
Outlet
Price
26.1300.20
1/4” M BSP
1/4” F BSP
26.1300.40
3/8” M BSP
3/8” F BSP
26.1300.42
1/4” M BSP
3/8” F BSP
Page 52
fax: 01494 441542
[email protected]
Tools/Accessories
Synthetic Oil
Synthetic Oil for use in the A range of pumps
Part No
Size
99.056
0.5 Litres
99.057
1 Litre
Price
Silicon Grease
Part No
26.0000.00
Size
Price
500 Grams
Valve Extractor
Essential tool for removing valves.
Part No
99.061
P11 - P30
99.077
P45 - P50
99.074
NP25
99.076
P62
15.0924*
Price
P45/P50/P52
* Seal Sleeve Remover
*
www.speck.co.uk
tel: 01494 523203
Page 53
Terms & Conditions
General
1.
(a) All contracts between Speck Pumps (UK) Limited ("Speck") and the Purchaser shall
be subject to the following conditions of sale which shall constitute all the terms of
the contract between Speck and the Purchaser.
(b) These conditions shall supersede any earlier terms and conditions employed by
Speck.
(c) Unless expressly agreed by Speck in writing, these conditions shall override any
standard or other terms or other conditions stipulated, incorporated or referred to
by the Purchaser in negotiations or elsewhere.
(d) No variation or waiver of or addition to these conditions shall be effective unless
confirmed in writing by Speck.
(e) The contract between the Purchaser and Speck shall be concluded only upon
written acceptance by Speck.
(f) No quotation by Speck shall constitute an offer and such quotations are valid for
30 days only.
Prices
2.
(a) The price stated is the net price for the goods for delivery from Speck's warehouse
in accordance with the contract.
(b) Speck reserves the right to alter prices from time to time without notice to reflect
changes in the rates of exchange, increases in customs, excise or other duties or
taxes or changes in the cost of raw materials and labour notwithstanding Speck's
previous acceptance of an order. In such cases, the effective price will be the price
shown on Speck's standard price list in force on the date of delivery.
(c) Unless otherwise indicated in writing all quotations by Speck are exclusive of all
taxes, (including but not limited to VAT) and of all duties, levies and other charges
all of which, where applicable, will be separately charged at the appropriate rates.
(d) In view of Speck's policy of continuous product improvement, alterations in design
and construction may be made by Speck without notice.
(e) Where carriage, insurance, storage or other charges are shown separately from
the price they will nevertheless be payable by the Purchaser at the same time as if
they form part of the price and shall be treated as such a part for the purposes of
these conditions.
Payment
3.
(a) Time for payment shall be of the essence of the contract and payment shall be
made net cash within 30 days of the invoice date at the address shown overleaf, in
the absence of any express agreement to the contrary, and shall be due before any
of the goods are sold or dealt with in any manner by the Purchaser. Where it is
expressly agreed that the price is payable in foreign currency, all banking and
similar charges shall be for the account of the Purchaser. Payment in the event of
goods being delivered outside the United Kingdom shall be against the production
of shipping documents.
(b) If the Purchaser fails to make payment by the due date Speck shall be entitled to
charge interest on the sum or balance owing (without prejudice to any other rights
of Speck in respect of such default) on a daily basis at the rate of 2% per month
being calculated from the date on which payment became due until the date on
which payment is made.
(c) In the event of Speck agreeing to accept payment by installments, any delay in the
receipt by Speck of one installment shall without prejudice to any other right,
forthwith entitle Speck to the whole of the outstanding sum.
(d) If any payment whatsoever is overdue or if the Purchaser has failed to take delivery
of any goods or is in breach of any of these conditions which (if capable of
remedy) is not remedied within 7 days of the Purchaser being notified thereof
Speck shall without prejudice to any other rights or remedies available to them be
entitled to suspend or cancel deliveries of goods under this or any other contract
made between Speck and the Purchaser without any liability remaining on Speck.
(e) If the Purchaser purports to cancel the contract or refuses to take delivery of any of
the goods the Purchaser shall thereupon become liable for the full contract price
but will be credited with the amount obtained by Speck less any deposit payable if
Speck is able to dispose of the contract goods.
Delivery
4.
(a) Whilst Speck will use all reasonable endeavours to deliver or dispatch goods
within the time stated, any time stated is an estimate only and the Purchaser shall
be bound to accept goods when available. Speck shall not be liable for any loss
or damage of any kind and howsoever arising caused by failure to deliver or
Page 54
dispatch within the time stated.
(b) Should Speck be unable to make any delivery at the time provided therefore by
reason of strike, lock-out, trade dispute, breakdown of plant, fire, accident,
weather conditions, hostilities (whether or not war is declared), prohibition of
export. short~ of labour, materials, power or transport, government order, act of
God or any cause whatsoever beyond the control of Speck, delivery may be wholly
or partly suspended and the period of delivery shall be extended by the period
during which those conditions continue. If the said period exceeds 3 months,
Speck shall have the right to determine the contract without prejudice to rights
accrued in respect of deliveries already made or any other rights acquired under
the contract.
(c) Notwithstanding that the invoice price may specifically include the cost of carriage,
the risk in goods sold shall pass to the Purchaser upon transfer unto the carriers,
purchasers or Speck transport and the Purchaser shall insure the goods against
any loss or damage thereto or any part thereof unless otherwise agreed. This
provision shall apply even where the sale is made C.I.F. or any other ex-works
basis.
(d) In a case where at the Purchaser's cost Speck concludes the contract of carriage
and arranges for insurance of the goods for transit Speck shall be deemed to be
acting solely as agent for the Purchaser and sub-section 2 and 3 of section 32 of
the Sale of Goods Act, 1979 shall not be applicable.
(e) If goods are upon delivery found to be damaged Speck shall not in any event be
liable unless
(l) the Purchaser gives written notice to Speck and the carrier within 3 days of the
receipt of the goods;
(II) the Purchaser gives Speck a reasonable opportunity to arrange for inspection
of the goods.
If Speck is satisfied that the damage was not caused in transit, it shall replace or
repair the goods at its option.
(f) If Speck replaces or repairs any goods pursuant to (e) above the Purchaser shall
forthwith if requested to do so by Speck pack the goods in a suitable manner so as
to ensure no further damage is caused and return them forthwith to Speck or to
whomever Speck shall direct at the Purchaser's cost.
(g) Speck reserves the right to charge the Purchaser any costs, charges or expenses
incurred by Speck as a result of any warehousing (including charges for storage in
Speck's own premises), carriage, insurance and handling in consequence of any
act or omission of the Purchaser its servants or agents or as a result of any special
requirements or stipulations of the Purchaser not provided for in the contract.
(h) Where goods are required to be delivered outside the United Kingdom the
Purchaser will be responsible for obtaining all consents and licences which are
necessary to enable it to import and use the goods and for all necessary consents
C including exchange control consent) to enable it to make payment for the
goods.
(i) Unless otherwise specified, goods are normally supplied packaged or in nonreturnable containers at a nominal charge If the goods are to be delivered outside
the United Kingdom then a separate charge will be made for packaging. Where
goods are supplied in returnable containers a charge will be made to cover the
cost thereof. In this event the Purchaser will be credited in full only if the empty
container is returned to Speck carriage paid in good condition. Details of such
returned containers must be advised to Speck separately at the time when they are
returned and containers must be clearly marked with the sender's name and
address and the Advice Note number under which they were despatched.
Title
5.
(a) The property in the goods shall not pass to the Purchaser until the Purchaser has
paid in full all the sums due to Speck. As legal ownership remains in Speck the
Purchaser shall be bailee of the goods Speck.
(b) The goods shall be stored separately from any other goods of the Purchaser and in
such a way that they can be readily identified as the property of Speck.
(c) If Speck's goods shall have become incorporated or mixed or form part of some
other property or machine, the Purchaser shall mark both the goods and the new
products of which they are a constituent part in such a way that they can be
readily identified as Speck's property.
(d) Legal ownership of the said new products shall remain in Speck and the Purchaser
shall be bailee of the new products for Speck.
(e) Subject to (f) and (g) below Speck may entitle the Purchaser to sell the goods and
new products in the ordinary course of business on the basis that the proceeds of
sale will belong to Speck and shall be placed in a separate account and shall be
paid to Speck on demand. No such sale may be made as the agent of Speck.
(f) Speck may revoke any power of sale given to the Purchaser by notice to the
Purchaser if payment for the goods is still overdue 7 days after a written demand
has been made.
fax: 01494 441542
[email protected]
Terms & Conditions
(g) The purchaser's power of sale shall automatically cease and this contract shall
immediately determine if a Receiver is appointed over any of the assets or the
undertaking of the Purchaser or a winding-up order is made against the Purchaser
or the Purchaser goes into voluntary liquidation or calls a meeting of or makes any
arrangement or composition with creditors or commits an act of bankruptcy or
ceases trading. If any such event should occur, the Purchaser shall promptly notify
Speck thereof.
(h) Upon determination of the Purchaser's power of sale under (f) or (g) above or in
an event of default by the Purchaser Speck shall be entitled to enter the premises
of the Purchaser without notice to take possession of the goods and new products
not paid for and as between the Purchaser and Speck this condition will constitute
the authority of the Purchaser to Speck to enter on the premises of any other
person holding the goods as the Purchaser's agent and on whose property the
goods may be and to remove the goods.
(i) From the date of delivery of the goods until actual payment the Purchaser shall
keep the goods fully insured, and if the goods are lost, destroyed or damaged,
shall hold the proceeds of insurance to the order of Speck pending payment of
sums Out-standing to Speck.
Call-Off Orders and Delayed Delivery
6.
Call-off orders must be completed within one year from the date of the first delivery,
Speck will only accept instructions to delay delivery of an order beyond the date given
in (the written acceptance) (delivery schedule agreed between Speck and the Purchaser)
providing not less than 3 months' prior written notice of such variation is given to
Speck. Where less than 3 months' of a request a delivery is given, Speck shall be
entitled at its sole discretion and without prejudice to any other right or remedy it may
nave to terminate the contract forthwith or to agree to such a delay and:(a) to exercise its right under paragraph 4 (g) hereof; and
(b) to charge interest on the sum which would have become due had the goods been
delivered in accordance with the said (written acceptance) (delivery schedules) at a
rate of 2% per month calculated from the date on which payment would have
become due had the goods been so delivered until the date on which payment is
actually made.
Guarantees, Warranties
and Limitation of Liability
7.
(a) Speck undertakes to repair or at their Option replace or credit against the invoiced
sum any goods manufactured by Speck or any part or parts thereof manufactured
by Speck which are discovered by the Purchaser to be defective in materials or
workmanship provided that an opportunity shall have been given to Speck to
inspect such goods.
(b) Speck shall not be liable for any claim under (a) above unless
(i) written notice of the defect is given to Speck within 7 days of the discovery of
the same; and
(ii) the goods in question were new when purchased by the Purchaser from Speck
and have been properly stored and operated by the Purchaser prior to the
defect occurring; and
(iii) the goods in Question have not been subject to abnormal use or any
modification prior to the defect occurring; and
(iv) the goods in Question at Specks request are returned to Speck at the
Purchaser's expense.
Speck shall not be liable for any claim unless made within six calendar months
from the date of delivery.
(c) Speck may make a charge for labour for effecting repairs under (a) if the product
is not in use within Speck's service area the mainland of England, Scotland or
Wales.
(d) In the event of any repairs or replacement being carried out free of charge by
Speck under (a) any replacement parts supplied in connection therewith by Speck
to the Purchaser shall be covered by the provisions of (a) for the remainder (if any)
of the period of six months referred to under (b). In no circumstances will the
aforementioned period be extended beyond six months from the date of delivery of
the original new products.
(e) The warranty contained in (a) and (b) above is given in substitution for all
conditions and warranties whether expressed or implied by common law, statute,
custom of trade, course of dealing or otherwise and all such conditions and
warranties are hereby excluded save where otherwise provided by statute.
(f) The Purchaser hereby confirms that the sale is no a consumer sale within the
meaning of the Sale of Goods Act, 1979.
(g) Speck shall not be liable in contract or tort or otherwise for direct or consequential
loss or damage or injury in connection with or arising out of possession,
www.speck.co.uk
tel: 01494 523203
operation, use, malfunction or modification of the goods save as provided for in
(e) above and the Purchaser shall indemnify Speck in respect of any claim for loss,
damage or injury to any person or property or for any other loss directly or
indirectly occasioned by or arising from the possession, operation or use of the
goods or arising from the malfunction or modification of the goods.
(h) The Purchaser hereby confirms that there have been no representations made by
or on behalf of Speck on the faith of which the Purchaser entered into the contract
except and to the extent to which such representations are herein expressly set
Out. No servant or agent of Speck has any authority to give any warranty or make
any representation concerning the goods.
Trade Mark or Names
8.
(a) No trade mark or name carried on goods supplied by Speck may be erased or
replaced without the consent of Speck.
(b) The Purchaser may not use in relation to any other goods of any description
whatsoever any registered trade mark or name used or entitled to be used by
Speck, or by any of Speck's subsidiaries.
(c) The Purchaser will be fully responsible for any patent trade mark, design or
copyright infringement or any other infringement of a third parties' rights resulting
from the Purchaser's use or sale of any of the goods and the Purchaser shall fully
and completely indemnify Speck in respect of all damages, costs, charges and
expenses for which Speck may be liable as a result of any such infringement or
alleged infringement.
Default
9.
If the Purchaser shall make default in or commit a breach of the contract or of any
other of its obligations to Speck, or if any distress or execution shall be levied upon the
Purchaser's property or assets, or if the Purchaser shall make or offer to make any
arrangement or composition with creditors, or commit any act of bankruptcy, or if any
petition or receiving order in bankruptcy shall be presented or made against him or if
the Purchaser is a limited company and any resolution or petition to wind - up such
company (other than for the purposes of amalgamation or re - construction) shall be
passed or presented, or if a receiver of such company s undertaking, property or assets
or any part thereof shall be appointed, Speck shall have the right forthwith to determine
any contract then subsisting and upon written notice of such determination being
posted by it to the Purchaser's last known address any subsisting contract shall be
deemed to be determined without prejudice to any claim or right Speck might otherwise
make or exercise.
Descriptive Matter
10.
All descriptive matter (including but not confined to catalogues, advertisements,
brochures, drawings, illustrations, specifications or dimensions) is approximate only
given for general guidance and shall not form part of this contract
Waiver
11.
No failure or delay in exercising any rights under these conditions shall operate as a
waiver thereof or extend to or affect any other or subsequent events or impair any rights
or remedies consequent thereon or in any way modify or diminish the rights of speck
under these conditions.
Severability
12.
In the event that any of these conditions shall become or shall be declared by any
Court or competent jurisdiction to be invalid or unenforceable in any way such
invalidity shall in no way impair or affect any of the remaining conditions hereof all of
which will remain in full force and effect.
Jurisdiction
13.
These conditions and this contract shall be governed and construed in accordance with
English law and any dispute or matter arising out of this contract shall be submitted for
determination to the English Courts to the jurisdiction of which Speck and the Purchaser
agree to submit.
Page 55
Seal and Valve Repair Kits
Seal Kits
P Series Pumps
P11 series
P21/15
P21/18 &23
P21/16-200
P22/15-280
P22/28-100
P30/25-220
P30/30-180
P30/36-150
P30/43-130
P41/33-250
P41/48-180
P41/51-130
P41/58-110
P45/46-320
P45/60-250
P45/85-160
P45/75-180
P51/135-90
P52/37-400
P52/54-270
P52/72-200
P52/100-150
P52/120-120
P55/100-200
P55/128-160
P55/165-100
Page 56
14.0494
14.0498
14.0500
14.0305
14.0434
14.0459
14.0038
14.0039
14.0040
14.0041
14.0052
14.0051
14.0050
14.0049
14.0644
14.0528
14.0432
14.0430
14.0564
14.0449
14.0527
14.0015
14.0014
14.0013
14.0524
14.0476
14.0475
£
Valve Kits
14.0496
14.0496
14.0496
14.0335
14.0435
14.0460
14.0037
14.0037
14.0037
14.0037
14.0048
14.0048
14.0047
14.0047
14.0769
14.0455
14.0455
14.0455
14.0394
14.0469
14.0455
14.0455
14.0455
14.0455
14.0474
14.0474
14.0474
Seal Kits
£
£
Valve Kits
NP Series Pumps
NP10 series
NP16/15-200
NP16/18 & 21
NP25/21 & 25
NP25/30 & 38
NP25/41 & 50
14.0444
14.0454
14.0406
14.0398
14.0399
14.0400
14.0364
14.0364
14.0364
14.0643
14.0397
14.0397
A Series Axial Pumps
A11/10-100
A2/12-130
A2/14-120 Honda
A11/2 Unloader only
A31 series
A31 Unloader only
A51/10 &20
A51/13 & 16
A51/15-200 Honda
14.0307
14.0307
14.0307
14.0349
14.0301
14.0336
14.0023
14.0036
14.0023
14.0306
14.0306
14.0306
£
14.0300
14.0022
14.0022
14.0022
Unloader Valve Repair Kits
UL180
14.0024
UL180/280
14.0441
UL221
14.0025
UL221 Plate type
14.0531
UL261
14.0405
UL 261 Plate type
14.0447
UL 262
14.0554
UL300/1
14.0027
UL300/2
14.0028
UL300/3
14.0029
UL500/11
14.0426
UL500/32
14.0602
fax: 01494 441542
[email protected]
Technical Data
PUMP PERFORMANCE BY RANGE
Pump Model
A11/10-100
A51/10-250
A51/20-160
A51/15-200H
NP10/4-140
NP10/10-140
NP10/13-140
NP10/15-140
NP16/13-220
NP16/14-210
NP16/15-210
NP16/18-140
NP16/21-140
NP25/12-500
NP25/15-500
NP25/21-350
NP25/21-280
NP25/25-220
NP25/30-180
NP25/38-150
NP25/41-140
NP25/50-120
NP25/70-100
P11/3-200
P11/5-200
P11/10-100
P11/13-100
P11/15-150
P11/10-100D
P11/13-100D
P11/15-150D
P21/16-200
P21/15-160
Page 57
Volume
Imp. Gpm
max. l/min
I/h
9.4
10.2
19.8
15
3.45
10.6
13.1
14.6
14.4
13.9
15
18.3
20.8
12.1
14.5
20.8
21
25.2
31.4
37.7
40.6
48.7
70.1
3.1
4.7
10.2
12.7
14.7
6.5/5.3
8.0/6.7
9.3/7.8
15.1
14.7
564
612
1188
900
207
636
786
876
864
834
900
1098
1248
726
870
1248
1260
1512
1884
2262
2436
2922
4206
186
282
612
764
882
390/318
480/402
558/468
906
882
2.1
2.2
4.4
3.3
0.8
2.3
2.9
3.2
3.2
3.1
3.3
4
4.6
2.7
3.2
4.6
4.6
5.5
6.9
8.3
8.9
10.7
15.4
0.7
1
2.2
2.8
3.2
1.4/1.2
1.8/1.5
2.0/1.7
3.3
3.2
US Gpm
Plunger Ø
mm
Hub Stroke
mm
2.5
2.7
5.2
4
0.9
2.8
3.5
3.9
3.8
3.7
4
4.8
5.5
3.2
3.8
5.5
5.5
6.6
8.3
9.9
10.7
12.8
18.5
0.8
1.2
2.7
3.4
3.9
1.7/1.4
2.1/1.8
2.5/2.1
4
3.9
18
12
12
12
18
18
18
18
12
18
18
20
20
14
14
18
18
18
22
22
25
25
30
12
12
18
18
18
18
18
18
16
18
3.4
10
12.4
14.1
14.1
10.6
14.1
14.1
16
20
24
20
20
24
20
24
20
24
24
8.1
12.4
10
12.4
14.1
10
12.4
14.1
18
14.1
Pressure max
bar
PSI
100
250
160
200
140
140
140
140
220
210
210
140
140
500
500
350
280
220
180
150
140
120
100
200
200
150
150
150
60
60
60
200
160
1450
3625
2320
2900
2030
2030
2030
2030
3190
3045
3045
2030
2030
7250
7250
5075
4060
3190
2610
2175
2030
1740
1450
2900
2900
2175
2175
2175
870
870
870
2900
2320
fax: 01494 441542
Temp max.
°C
70
70
70
70
70
70
70
70
60
70
70
70
70
40
40
70
70
70
70
70
70
70
70
70
70
70
70
70
90/105
90/105
90/105
70
70
RPM
rpm
Power Consumption
kW
HP
2700
1.8
1450
4.9
2880
6.1
3000
5.8
1450
1
1450
3
1450
3.6
1450
4.1
3450
6.2
1800
5.8
1450
6.2
1450
5
1450
5.7
1450
12.3
1450
14.8
1450
14.8
1450
11.6
1450
11
1450
11.1
1450
11.1
1450
11.2
1450
11.5
1450
13.8
1420
1.3
1420
1.9
1420
3.1
1420
3.9
1420
4.5
900/750 0.8/0.7
900/750 1.0/0.9
900/750 1.2/1.0
1450
5.9
1420
4.6
2.4
6.6
8.2
7.8
1.3
4
4.8
5.5
8.3
7.8
8.3
6.7
7.7
16.5
19.9
19.9
15.6
14.8
14.9
14.9
15
15.4
18.5
1.7
2.6
4.2
5.2
6
1.1/0.9
1.3/1.2
1.6/1.3
7.9
6.2
Weight
ca. Kg
Recommended Unloader
4
12
12
12
5.4
5.3
5.3
5.3
7.3
7.3
7.3
7.3
7.3
17
17
16.6
16.6
16.6
16.6
16.6
16.6
16.6
18
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
7.8
7.8
**
UL180/280
UL180
UL180
ULA150, UL180
ULA150, UL180
ULA150, UL180
ULA150, UL180
ULA201, UL180
ULA201, UL180
ULA201, UL180
ULA201, UL180
ULA201, UL180
UL50/500
UL50/500
VB80/400
UL180/280
VB80/280
UL180/UL221
UL221/UL262
UL221/UL262
UL262
UL262
UL180
UL180
UL180
UL180
UL180
UL180*
UL180*
UL180*
UL180
UL180
[email protected]
Technical Data
PUMP PERFORMANCE BY RANGE
Pump Model
P21/18-130
P21/23-130
P21/7-400
P21/5-450
P21/18-130D
P21/23-130D
P22/15-280
P22/21-240
P22/28-100
P22/28-130
P31/25-220
P31/36-150
P30/43-130
P30/36-150D
P30/43-130D
P41/33-250
P41/48-180
P41/51-130
P41/58-110
P41/58-110DK
P41/70-110
P45/37-400MS
P45/46-320
P45/60-250
P45/75-180
P45/85-160
P45/120-80
P50/94-110
Volume
Imp. Gpm
max. l/min
I/h
18.1
23.1
6.8
5.1
11.5/9.6
14.7/12.2
15.1
19.0
28.3
28.3
25.2
36.2
42.5
23.0/19.2
27.0/22.5
33.7
48.6
51.1
58.2
39.7
67.7
37.0
46.0
57
74.5
85.5
123.1
93.8
1086
1386
408
306
690/576
882/732
906
1140
1698
1698
1512
2172
2550
1380/1152
1620/1350
2022
2916
3066
3492
2382
4062
2220
2760
3420
4470
5130
7386
5628
4
5.1
1.5
1.1
2.5/2.1
3.2/2.7
3.3
4.2
6.2
6.2
5.5
8
9.3
5.1/4.2
5.9/4.9
7.4
10.7
11.2
12.8
8.7
14.9
8.1
10.1
12.5
16.4
18.8
27.1
20.6
US Gpm
Plunger Ø
mm
Hub Stroke
mm
4.8
6.1
1.8
1.3
3.0/2.5
3.9/3.2
4
5
7.5
7.5
6.6
9.6
11.2
6.1/5.1
7.1/5.9
8.9
12.8
13.5
15.4
10.5
17.9
9.8
12.1
15
19.7
22.6
32.2
24.7
20
20
12
12
20
20
16
18
22
22
20
24
26
24
26
20
24
28
30
30
30
20
22
24
28
30
36
36
14.1
18
18
14.1
14.1
18
18
18
18
18
20
20
20
20
20
26
26
26
26
26
30
42
42
42
42
42
42
40
Pressure max
bar
PSI
130
130
400
450
60
60
280
240
100
130
220
150
130
60
60
250
180
130
110
80
110
400
320
250
180
160
80
110
1885
1885
5800
6525
870
870
4060
3480
1450
1885
3190
2175
1885
870
870
3625
2610
1885
1595
1160
1595
5800
4640
3625
2610
2320
1160
1595
Temp max.
°C
RPM
rpm
70
70
70
70
90/105
90/105
60
60
70
70
70
70
70
90/105
70
70
70
70
105
60
70
60
60
60
60
60
60
105
1420
1420
1420
1420
900/750
900/750
1450
1450
1450
1450
1420
1420
1420
900/750
900/750
1450
1450
1100
1100
750
1100
1000
1000
1000
1000
1000
1000
800
Power Consumption
kW
HP
4.6
5.9
5.6
4.7
1.5/1.3
1.9/1.6
8.6
9.0
5.8
7.5
11
11
11
3.0/2.5
3.5/2.9
17.2
17.9
13.6
13.1
6.9
14.7
30.2
30.1
29.1
27.4
27.9
20.1
20.3
6.2
7.9
7.5
6.3
2.0/1.7
2.6/2.1
11.5
12.1
7.8
10.1
14.8
14.8
14.8
4.0/3.4
4.7/3.9
23.1
24
18.3
17.6
9.3
19.7
40.5
40.3
39.1
36.8
37.4
26.9
27.2
Weight
ca. Kg
Recommended Unloader
7.8
7.8
7.8
7.8
7.8
7.8
8.8
8.8
8.8
8.8
19
19
19
19
19
30
30
30
30
30
30
54
50
50
50
50
50
50
UL180
UL180
VB80/400***
VB80/400***
UL180*
UL180*
UL180/280
UL180/280
UL180/UL221
UL180/UL221
UL180/280
UL221
UL221
UL221*
UL221*
UL262
UL262
UL262
UL262
UL262*
VB80/150
VB80/400
VB80/400
UL262
UL262
UL262
UL262
UL262
P50/94-110D
P51/135-90
P51/97-140
P52/12-1000
P52/17-800
P52/22-600
P52/30-500
P52/37-400
P52/54-270
P52/72-200
P52/100-150
P52/120-120
P52/70-100BN
P55/80-250G
P55/128-160G
P55/165-100G
P55/100-200G
P62/50-420
P62/70-300
P62/90-210
P62/140-150
P62/160-100BN
P62/175-120
P71/40-700
P71/50-500
P71/70-400
P71/90-300
P71/110-250
P71/145-180
P71/200-130
P71/250-100
P72/320-100R
P80/110-500
P80/185-300G
P80/215-260G
P80/285-200G
P80/340-170
P80/400-140
* MAX 90°C
66.8
134.1
97.3
12.8
17.5
22.8
30
37
53.5
72.1
98.3
123.1
70
78.0
127.8
164
105
48.5
68.1
88.9
139
160.0
175.9
37.5
48
67.7
88.5
107
145.3
205.8
249.1
320.0
110
185
213
283.0
340
400
** BUILT IN UNLOADER
Page 59
4008
8046
5838
768
1050
1368
1800
2220
3210
4326
5898
7386
4200
4680
7668
9840
6300
2910
4086
5334
8340
9600
10554
2376
2880
4062
5310
6420
8718
12348
14946
19200
6600
11100
12780
16980
20400
24000
14.7
29.5
21.4
2.8
3.8
5
6.6
8.1
11.8
15.8
21.6
27.1
15.4
17.2
28.1
36
23.1
10.7
15
19.5
30.5
35.2
38.7
8.2
10.5
14.9
19.5
23.5
31.9
45.2
54.7
70.5
24.2
40.7
46.9
62.3
74.9
88.1
17.6
35.4
25.7
3.4
4.6
6
7.9
9.8
14.1
19
25.9
32.5
18.5
20.6
33.7
43.3
27.7
12.8
18
23.5
36.7
42.2
46.4
9.9
12.7
17.9
23.4
28.2
38.3
54.3
65.7
84.6
29.0
48.9
56.3
74.8
89.8
105.7
36
42
32
12
14
16
18
20
24
28
32
36
36
28
36
45
32
24
28
32
40
50
45
22
24
28
32
36
42
50
55
62
35
45
48
55
60
65
40
42
42
42
42
42
42
42
42
42
42
42
42
46
46
46
46
48
48
48
48
48
48
52
52
52
52
52
52
52
52
52
72
72
72
72
72
72
80
90
140
1000
800
600
500
400
270
200
150
120
100
250
160
100
200
420
300
210
150
100
120
700
500
400
300
250
180
130
100
100
500
300
260
200
170
140
1160
1305
2030
14500
11600
8700
7250
5800
3915
2900
2175
1740
1450
3625
2320
1450
2900
6090
4350
3045
2175
1450
1740
10150
7250
5800
4350
3625
2610
1885
1450
1420
7250
4350
3770
2900
2465
2030
60
60
60
40
40
40
40
60
60
60
60
60
40
60
60
60
60
60
60
60
60
40
60
60
60
60
60
60
60
60
60
60
30
30
30
30
30
30
570
800
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
570
1000
910
750
1000
800
800
800
800
600
800
750
750
750
750
700
700
700
700
700
580
580
580
580
580
580
10.6
23.8
26.8
26.2
28.5
27.9
29.5
30.2
28.3
28.4
29.7
29.1
14.4
38.4
41.7
33.4
42.9
42.4
41.7
36.8
41
32.7
41.6
51.5
57.2
53.3
52.3
52.7
51.5
52.7
49
63
106
107
106
109
110
106
14.2
31.9
35.9
35.2
38.3
37.4
39.6
40.5
38
38.1
39.9
39.1
19.3
51.5
56
44.8
57.6
56.9
56
49.4
55
43.8
55.8
69
63.4
71.5
70.2
70.7
69.1
70.7
65.8
84.4
142
143.4
142
146.1
147.5
142.2
50
57
57
52
52
52
64.4
54
54
54
54
54
50
81
81
81
81
140
140
140
140
140
140
170
170
170
170
170
170
170
170
170
348
348
348
348
348
348
UL262*
UL262
UL262/UL500/11
S50/1000
S50/1000S50/1000UL500/31H/UL50/500
VB80/400
UL262
UL262
UL262
UL262
UL262
UL262
UL300/1, UL500/11H
UL262
UL500/31H
UL500/31H
UL262/2
UL500/31H
UL500/31H
UL500/31H
UL500/31H
UL500/31H
UL500/31H
UL300/2
UL500/11H
UL500/11H
S400
S400
S400
S400
S400
S400
S400
*** UP TO 400 BAR
fax: 01494 441542
[email protected]
Nozzle Chart
1 Gallon = 4.54 litres
1 bar = 14.5 psi
50
80
100
120
140
150
160
180
200
220
240
260
280
300
350
400
450
500
02
025
03
04
045
05
055
06
065
07
075
08
085
09
10
11
12
13
14
15
16
18
20
25
30
35
40
3.2
4
4.7
6.3
7.1
7.9
8.7
9.5
10.3
11.1
11.9
12.8
13.4
14.2
15.8
17.4
19
20.6
22.1
23.7
25.3
28.5
31.6
39.5
47.4
55.3
63.2
4
5
6
8
9
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
32
36
40
50
60
70
80
4.5
5.6
6.7
8.9
10.1
11.2
12.3
13.4
14.5
15.7
16.8
17.9
19
20.1
22.4
24.6
26.5
29.1
31.3
33.5
35.8
40.2
44.7
55.9
67.1
78.3
89.4
4.9
6.1
7.3
9.8
11
12.2
13.5
14.7
15.9
17.1
18.4
19.6
20.8
22
24.5
26.9
29.4
31.8
34.3
36.7
39.2
44.1
49
61.2
73.5
85.7
95
5.3
6.6
7.9
10.6
11.9
13.2
14.6
15.9
17.2
18.5
19.8
21.2
22.5
23.8
25.5
29.1
31.7
34.4
37
39.7
42.3
47.6
52.9
66.1
79.4
92.6
106
5.5
6.8
8.2
11
12.3
13.7
15.1
16.4
17.8
19.2
20.5
21.9
23.3
24.6
27.4
30.1
32.9
35.6
38.3
41.1
43.8
49.3
54.8
68.5
82.2
95.9
110
5.7
7.1
8.5
11.3
12.7
14.1
15.6
17
18.4
19.8
21.2
22.6
24
25.5
28.3
31.1
33.9
36.8
39.6
42.4
45.3
50.9
56.6
70.7
84.9
99
113
6
7.5
9
12
13.5
15
16.5
18
19.5
21
22.5
24
25.5
27
30
33
36
39
42
45
48
54
60
75
90
105
120
6.3
7.9
9.6
12.6
14.2
15.8
17.4
19
20.6
22.1
23.7
25.3
26.9
28.5
31.6
34.8
37.9
41.1
44.3
47.4
50.6
56.9
63.2
79.1
94.9
111
126
6.6
8.3
9.9
13.3
14.9
16.6
18.2
19.9
21.6
23.2
24.9
26.5
28.2
29.8
33.2
36.5
39.8
43.1
46.4
49.7
53.1
59.7
66.3
82.9
99.5
116
133
6.9
8.7
10.4
13.9
15.6
17.3
19.1
20.8
22.5
24.2
26
27.7
29.4
31.2
34.6
38.1
41.6
46
48.5
52
55.4
62.4
69.3
86.5
104
121
139
7.2
9
10.6
14.4
16.2
18
19.8
21.6
23.4
25.2
27
28.8
30.6
32.4
36.1
39.7
43.3
46.9
50.5
54.1
57.7
64.9
72.1
90.1
106
126
144
7.5
9.4
11.2
15
16.8
18.7
20.6
22.4
24.3
26.2
28.1
29.9
31.8
33.7
37.4
41.2
44.9
48.6
52.4
56.1
59.9
67.3
74.8
93.5
112
131
150
7.7
9.7
11.6
15.5
17.4
19.4
21.3
23.2
25.2
27.1
29
31
32.9
34.9
38.7
42.6
46.5
50.3
54.2
58.1
62
69.7
77.5
96.6
116
136
155
8.4
10.5
12.6
16.7
18.8
20.9
23
25.1
27.2
29.3
31.4
33.5
35.6
37.6
41.8
46
50.2
54.4
58.6
62.7
66.9
75.3
83.7
105
125
146
167
8.9
11.2
13.4
17.9
20.1
22.4
24.6
26.8
29.1
31.3
33.5
35.8
38
40.2
44.7
49.2
53.7
58.1
62.6
67.7
72
80.5
89.4
112
134
157
179
9.5
11.9
14.2
19
21.3
23.7
26.1
28.6
30.8
33.2
35.6
37.5
40.3
42.7
47.4
52.2
58.9
61.7
66.4
71.2
75.9
85.4
94.9
119
142
165
190
10
12.5
15
20
22.5
25
27.5
30
32.5
35
37.6
40
42.5
45
50
55
60
65
70
75
80
90
100
125
150
175
200
Example : For a pump rated at 180 bar, 21 litres / min use an 07 Jet
Page 60
fax: 01494 441542
[email protected]
Litres / min
Pressure In Bar
Nozzle
Size
Notes
www.speck.co.uk
tel: 01494 523203
Page 61
Notes
Page 62
fax: 01494 441542
[email protected]
Index
A
Accumulators
Adjustable Nozzle
B
Bell Housings
Brushes
C
Chemical Filters
Chemical Injectors
Chemical Regulator
Chewing Gum Remover
Connectors
Couplings
D
Dampers
Detergent Filter
Dirtblasters
Drain Jets
Drive Couplings
E
Easy Starter
Electric Motors
F
Ferrule
Filters
Flexi Couplings
Floor Cleaners
Flow Regulator
Flow Switch
Foam Injector
Foam Lance
G
Gauges
Gearboxes
Grease
Guns
H
Hose Reels
Hydroboom
I
Inlet Filters
Inlet Venturi
Inline Filter
K
Kombi Nozzles
L
Lances
M
Motors
N
Nipples
Non Return Valve
Nozzle Chart
www.speck.co.uk
19
31
11
37
45
39
41
36
50
47
19
45
28
30
12
42
13
32
45
12
35
43
43
38
38
33
11
53
20
34
36
45
41
46
31
25
13
Nozzle Protector
Nozzles
O
Oil
P
Pressure Gauges
Pressure Relief Valve
Pressure Switch
Pumps
Q
Quick Release Coupling
R
Repair Kits
Retro Jets
Rollover Nozzle
Rotating Jets
RPM Decelerator
S
Safety Valves
Sand Blasting Head
Screw Couplings
Seal Kits
Silicon Grease
Siphon Injectors
Snap Connectors
Solid Couplings
SP20 Couplings
SP30 Couplings
Spinning Jets
Steam Valve
Swivels
Synthetic Oil
T
Tank Cleaning Head
Thermal Protector Valve
Thermostat
Throttle Control
Tools
Triggers
Turbo Nozzle
Twin Nozzle Holder
U
Unloader Repair Kits
Unloader Valves
V
Valve Extractor
Valve Kits
Variable Nozzle
Y
Y Filter
31
30
53
33
17
44
1
49
56
30
31
30
42
17
32
47
56
53
39
49
12
49
47
28
42
51
53
34
43
43
42
53
20
28
31
56
14
53
56
32
46
47
42
60
tel: 01494 523203
Page 63

SPECK Catalogue - ISSUE 2

Transcription

Similar documents

Skynet

show times - Old Creamery Theatre

Eco linE 60/245 – 260 W

Eco linE 60/245 – 260 W

WISA 300 air pump specifications and diagrams

1230 W. 27TH AVE - Bear Tooth Theatrepub

1" Impact Wrench - Racine Railroad

Recreation Activities - Unofficial Guide to Disney`s Port Orleans