docFriga-Bohn, Searle and LU-VE Evaporators. - FSW
download 
Report Transcription
Friga-Bohn, Searle and LU-VE Evaporators. - FSW
Friga-Bohn EVB Evaporators EVB Fan assisted evaporators for Display Counters, Under Storage and Service Cabinets. Models M1, M2 and M3 are single side air discharge and models C1 and C2 have air discharge from both sides. The evaporators have a White casing and an ABS drip tray which can be reversed according to site conditions. Easy removal of fan panel and drip tray for cleaning and maintenance. An electric defrost kit can be fitted if required. Code H110 H111 H112 Fan Coil EVB-M1 EVB-M2 EVB-M3 Duty - Watts at SC1 (10KTD) 240 320 380 H115 H116 EVB-C1 EVB-C2 240 410 Defrost Kits H118 Heater Kit H119 Heater Kit To suit M1,M2,C1 To suit M3,C2 Standard Conditions: Condition Air Inlet Temperature SC 1 +10°C Evaporating Temperature 0°C Standard TD 10K The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. Specification: Model EVB M1 EVB M2 EVB M3 EVB C1 EVB C2 Air Vol. Fans cu/m hr 1 65 1 95 1 105 2 65 2 110 Defrost Watts 210 210 290 210 290 Dimensions (mm) L W H 370 80 440 370 80 440 490 80 440 370 89 440 490 89 440 www.fsw.uk.com Liq. 5/16 5/16 5/16 5/16 5/16 Connections Suct. Drain 5/16 16mm 5/16 16mm 5/16 16mm 5/16 16mm 5/16 16mm 65 Friga-Bohn MF / MR Evaporators Micro-freeze (MF) and Mini-freeze (MR) Compact Evaporators are suitable for installation in Cabinets and small Cold Rooms. The casings are made using special shock resistant ABS plastic according to the most severe hygiene standards. The coil blocks are manufactured using copper tube with helical internal grooving to increase the heat exchange coefficient and corrugated fins to maintain a high turbulence effect. MR & MF standard Polyster coated/ Code Model High Temperature H120 MF 1 H121 MF 2 H122 MF 3 H123 MF 4 Duty - Watts at SC 2 (8KTD) 350 400 750 790 Electric Defrost H126 MFE 1 H127 MFE 2 H128 MFE 3 H129 MFE 4 - High Temperature H170 MR 75R H171 MR 110R H172 MR 135R H173 MR 210R H174 MR 270R Duty - Watts at SC 3 (7KTD) 270 320 580 640 at SC 2 (8KTD) 680 1070 1270 2060 2620 Electric Defrost H178 MRE 75+E H179 MRE 110+E H180 MRE 135+E H181 MRE 210+E H182 MRE 270+E - Duty - Watts at SC 4 (6KTD) 190 240 430 450 - - at SC 3 (7KTD) 530 820 1070 1660 2230 at SC 4 (6KTD) 420 640 840 1320 1780 Application: Model MF MFE MR**R MRE**E Air Inlet Temperature +10°C/+2°C -10°C/-25°C +10°C/+2°C -10°C/-25°C Fin Spacing 4.23 mm (6 fpi) 4.23 mm (6 fpi) 4.23 mm (6 fpi) 4.23 mm (6 fpi) Defrost None Electric None Electric Standard Conditions: Condition SC 2 SC 3 SC 4 Air Inlet Temperature 0°C -18°C -25°C Evaporating Temperature -8°C -25°C -31°C Standard TD 8K 7K 6K The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. 66 Sales Office: 01543 437 010 Friga-Bohn Evaporators Specification: Model MF 1 MF 2 MF 3 MF 4 MR 75 MR 110 MR 135 MR 210 MR 270 Air Vol. cu.m/hr 270 250 460 430 290 650 580 870 1160 Fans 1 1 2 2 1 2 2 3 4 Defrost Watts 140 160 330 330 400 440 730 1200 1600 Dimensions (mm) L W D 399 429 150 399 429 150 599 429 150 599 429 150 514 438 209 784 438 209 784 438 209 1174 438 209 1504 438 209 www.fsw.uk.com Liq 5/16 5/16 5/16 5/16 3/8 3/8 3/8 1/2 1/2 Connections Suct. Drain 5/16 1/2” 5/16 1/2” 5/16 1/2” 5/16 1/2” 3/8 1” 3/8 1” 3/8 1” 5/8 1” 3/4 1” 67 Friga-Bohn SD Evaporators SD Evaporators come with White ABS cases for easy cleaning and have no sharp corners. Code Model High Temperature H200 SD024R H201 SD030R H202 SD038R H203 SD052R H204 SD062R H205 SD082R H206 SD104R H207 SD118R H208 SD148R H209 SD158R Duty - Watts at SC2 (8KTD) 2100 2410 2860 3690 5040 6310 7580 9050 10790 12180 Electric Defrost at SC 2 (8KTD) H210 H211 H212 H213 H214 H215 H216 H217 H218 H219 SD024R+ECK SD030R+ECK SD038R+ECK SD052R+ECK SD062R+ECK SD082R+ECK SD104R+ECK SD118R+ECK SD148R+ECK SD158R+ECK 2100 2410 2860 3690 5040 6310 7580 9050 10790 12180 Application: Model SD***R SD***R+ECK Air Inlet Temperature +10°C/+2°C +10°C/-5°C Fin Spacing 4.23 mm (6 fpi) 4.23 mm (6 fpi) Defrost None Electric Standard Conditions: Condition SC 2 Air Inlet Temperature 0°C Evaporating Temperature -8°C Standard TD 8K The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. 68 Sales Office: 01543 437 010 Friga-Bohn SD Evaporators Specification: Model SD024R SD030R SD038R SD052R SD062R SD082R SD104R SD118R SD148R SD158R Air Vol. cu.m/hr 1530 1470 1330 1570 2990 3260 3200 4090 4560 5470 Fans 1 1 1 1 2 2 2 3 3 4 Air Throw 13 13 12 14 13 15 14 13 14 13 Defrost Watts * 1000 1000 1000 1600 2160 3280 3280 3280 4400 4400 Dimensions (mm) L W H 710 410 458 710 410 458 710 410 458 940 410 460 1170 410 463 1630 410 468 1630 410 468 1630 410 468 2090 410 473 2090 410 473 Liq 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 Connections Suct. Drain 1/2 1” 1/2 1” 1/2 1” 5/8 1” 5/8 1” 7/8 1” 7/8 1” 7/8 1” 1-1/8 1” 1-1/8 1” All models should be fitted with externally equalised expansion valves. www.fsw.uk.com 69 Friga Bohn MUC Evaporators MUC Evaporators are suitable for chilling or low temperature storage applications. There are twenty-four models with capacities ranging from 1.7 kW through to 13.7 kW. The cases are made of White Enamelled Steel. Code Model High Temperature H300 MUC145R H301 MUC200R H302 MUC285R H303 MUC320R H304 MUC420R H305 MUC520R H306 MUC620R H341 MUC640R H342 MUC660R H343 MUC670R H307 MUC780R H308 MUC960R Duty – Watts at SC 2 (8KTD) 1850 2310 3480 3830 4940 5890 7170 8230 9560 10890 12010 13670 Electric Defrost H310 MUC145R+E1K H311 MUC200R+E1K H312 MUC285R+E1K H313 MUC320R+E1K H314 MUC420R+E1K H315 MUC520R+E1K H316 MUC620R+E1K H344 MUC640R+E1K H345 MUC660R+E1K H346 MUC670R+E1K H317 MUC780R+E1K H318 MUC960R+E1K at SC 2 (8KTD) 1850 2310 3480 3830 4940 5890 7170 8230 9560 10890 12010 13670 High Temperature H320 MUC140L H321 MUC195L H322 MUC280L H323 MUC315L H324 MUC415L H325 MUC515L H326 MUC615L H347 MUC635L H348 MUC655L H349 MUC665L H327 MUC775L H328 MUC955L at SC 2 (8KTD) 1700 2070 3170 3430 4520 5490 6420 6890 7410 9000 10610 12200 Electric Defrost H330 MUC140L+E1K H331 MUC195L+E1K H332 MUC280L+E1K H333 MUC315L+E1K H334 MUC415L+E1K H335 MUC515L+E1K H336 MUC615L+E1K H337 MUC775L+E1K H338 MUC955L+E1K at SC 2 (8KTD) 1700 2070 3170 3430 4520 5490 6420 10610 12200 The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. 70 Sales Office: 01543 437 010 Friga-Bohn MUC Evaporators Specification: Air Vol. cu.m/hr 1246 1239 2336 2076 2562 3252 3696 3264 3486 4168 7095 7895 1217 1239 2267 2075 2561 3250 3694 3435 3624 4436 7093 7893 Model MUC145R MUC200R MUC285R MUC320R MUC420R MUC520R MUC620R MUC640R MUC660R MUC670R MUC780R MUC960R MUC140L MUC195L MUC280L MUC315L MUC415L MUC515L MUC615L MUC635L MUC655L MUC665L MUC775L MUC955L Fans 1 1 2 2 2 3 3 3 3 4 2 2 1 1 2 2 2 3 3 3 3 4 2 2 Air Throw 12 12 12 12 12 12 12 12 12 12 28 45 12 12 12 12 12 12 12 12 12 12 28 45 Defrost Watts * 420 630 780 960 1320 1560 1860 2550 3150 3150 2340 3480 420 630 780 960 1320 1560 1860 2550 3150 3150 2340 3480 Dimensions (mm) L W H 560 400 357 560 464 357 966 400 357 966 400 357 1220 400 357 1220 464 357 1650 400 357 1990 400 365 2340 400 365 2340 400 365 1650 495 482 1650 590 482 560 400 357 560 464 357 966 400 357 966 400 357 1220 400 357 1220 464 357 1650 400 357 1990 400 365 2340 400 365 2340 400 365 1650 495 482 1650 590 482 Connections Liq Suct. 1/2 1/2 1/2 1/2 1/2 5/8 1/2 5/8 1/2 3/4 1/2 3/4 1/2 7/8 1/2 7/8 7/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-3/8 1/2 1/2 1/2 1/2 1/2 5/8 1/2 5/8 1/2 3/4 1/2 3/4 1/2 7/8 1/2 7/8 7/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-3/8 All models should be fitted with externally equalised expansion valves. Application: Model MUC***R MUC***R+E1K MUC***L MUC***L+E1K Air Inlet Temperature +10°C/+2°C +10°C/-5°C +10°C/+2°C +10°C/-5°C Fin Spacing 4.23 mm (6 fpi) 4.23 mm (6 fpi) 6.35 mm (4 fpi) 6.35 mm (4 fpi) Defrost None Electric None Electric Standard Conditions: Condition SC 2 Air Inlet Temperature 0°C Evaporating Temperature -8°C Standard TD 8K The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. www.fsw.uk.com 71 Friga Bohn LUC Evaporators LUC Evaporators are suitable for low temperature storage applications. There are eighteen models with capacities ranging from 1 kW through to 10.6 kW. The cases are made of White Enamelled Steel with aluminium drip trays. Code Model Electric Defrost H350 LUC155E H351 LUC210E H352 LUC295E H353 LUC350E H354 LUC440E H355 LUC550E H356 LUC650E H359 LUC700E H372 LUC710E H373 LUC720E H357 LUC840E H358 LUC1030E Duty – Watts at SC 3 (7KTD) 1420 1840 2690 3030 3960 4860 5680 6920 7510 8470 9240 10600 Duty - Watts at SC 4 (6KTD) 1100 1440 2040 2370 3120 3820 4480 5730 6220 6940 7260 8360 Electric Defrost H360 LUC150C H361 LUC205C H362 LUC290C H363 LUC345C H364 LUC435C H365 LUC545C H366 LUC645C H369 LUC695C H370 LUC705C H371 LUC715C H367 LUC835C H368 LUC1025C at SC 3 (7KTD) 1300 1670 2480 2780 3580 4390 5170 5680 6210 7080 8380 9640 at SC 4 (6KTD) 1030 1310 1960 2200 2830 3480 4110 4760 5180 5890 6610 7620 Application: Model LUC***E LUC***C Air Inlet Temperature -10°C/-25°C -10°C/-25°C Fin Spacing 4.23 mm (6 fpi) 6.35 mm (4 fpi) Defrost Heavy Duty Electric Heavy Duty Electric Evaporating Temperature -25°C -31°C Standard TD 7K 6K Standard Conditions: Condition SC 3 SC 4 Air Inlet Temperature -18°C -25°C The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. 72 Sales Office: 01543 437 010 Friga-Bohn LUC Evaporators Specification: Model LUC155E LUC210E LUC295E LUC350E LUC440E LUC550E LUC650E LUC700E LUC710E LUC720E LUC840E LUC1030E LUC150C LUC205C LUC290C LUC345C LUC435C LUC545C LUC645C LUC695C LUC705C LUC715C LUC835C LUC1025C Air Vol. cu.m/hr 1246 1239 2336 2076 2562 3252 3696 3264 3486 4168 7095 7895 1217 1239 2267 2075 2561 3250 3694 3435 3624 4436 7093 7893 Fans 1 1 2 2 2 3 3 3 3 4 2 2 1 1 2 2 2 3 3 3 3 4 2 2 Air Throw 12 12 12 12 12 12 12 12 12 12 28 45 12 12 12 12 12 12 12 12 12 12 28 45 Defrost Watts * 1300 2150 2000 3000 3600 3600 5640 6900 8400 8400 5640 8460 2150 2150 3000 3000 3600 3600 5640 6900 8400 8400 5640 8460 Dimensions (mm) L W H 560 400 357 560 464 357 966 400 357 966 400 357 1220 400 357 1220 464 357 1650 400 357 1990 400 365 2340 400 365 2340 400 365 1650 495 482 1650 590 482 560 400 357 560 464 357 966 400 357 966 400 357 1220 400 357 1220 464 357 1650 400 357 1990 400 635 2340 400 365 2340 400 365 1650 495 482 1650 590 482 Connections Liq Suct. 1/2 1/2 1/2 5/8 1/2 3/4 1/2 3/4 1/2 7/8 1/2 7/8 1/2 1-1/8 7/8 1-1/8 7/8 1-1/8 7/8 1-1/8 1-1/8 1-3/8 1-1/8 1-3/8 1/2 5/8 1/2 5/8 1/2 3/4 1/2 3/4 1/2 7/8 1/2 7/8 7/8 1-1/8 7/8 1-1/8 7/8 1-1/8 7/8 1-1/8 1-1/8 1-3/8 1-1/8 1-3/8 All models should be fitted with externally equalised expansion valves. www.fsw.uk.com 73 Friga-Bohn SKB Evaporators SKB Evaporators are suitable for chilling or low temperature storage applications. There are eighteen models with capacities ranging from 5.2 kW through to 29.5 kW. The cases are made of White enamelled galvanised sheet. All Models are fitted with 3PH Fans. Code Model High Temperature H399 SKB06R H400 SKB10R H401 SKB12R H402 SKB16R H403 SKB19R H404 SKB24R Duty - Watts at SC 2 (8KTD) 7620 13070 15260 20170 22780 29340 Electric Defrost at SC 2 (8KTD) H409 H410 H411 H412 H413 H414 SKB06R+E1K SKB10R+E1K SKB12R+E1K SKB16R+E1K SKB19R+E1K SKB24R+E1K Electric Defrost H419 H420 H421 H422 H423 H424 SKB06L SKB09L SKB11L SKB14L SKB18L SKB22L Electric Defrost H429 H430 H431 H432 H433 H434 SKB06L+E1K SKB09L+E1K SKB11L+E1K SKB14L+E1K SKB18L+E1K SKB22L+E1K Electric Defrost H439 H440 H441 H442 H443 H444 SKB06E SKB09E SKB11E SKB13E SKB16E SKB21E Electric Defrost H449 H450 H451 H452 H453 H454 SKB05C SKB08C SKB10C SKB12C SKB15C SKB19C 7620 13070 15260 20170 22780 29340 Duty - Watts - at SC 2 (8KTD) 6560 10420 13430 15540 20140 25920 - at SC 2 (8KTD) 6560 10420 13430 15540 20140 25920 - at SC 3 (7KTD) at SC 4 (6KTD) 6150 10110 12560 15290 18950 23470 4820 8000 10000 12090 15130 18590 at SC 3 (7KTD) at SC 4 (6KTD) 5240 8050 10650 12380 16080 20170 4170 6630 8530 9870 12890 16070 For application notes and standard conditions please see facing page. The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. 74 Sales Office: 01543 437 010 Friga-Bohn SKB Evaporators Specification: Model SKB06R SKB10R SKB12R SKB16R SKB19R SKB24R SKB06L SKB09L SKB11L SKB14L SKB18L SKB22L SKB06E SKB09E SKB11E SKB13E SKB16E SKB21E SKB05C SKB08C SKB10C SKB12C SKB15C SKB19C Air Vol. cu.m/hr 3800 8200 7600 12300 11400 14800 4000 8600 8000 12900 12000 15600 3800 8200 7600 12300 11400 14800 4000 8600 8000 12900 12000 15600 Fans 1 2 2 3 3 4 1 2 2 3 3 4 1 2 2 3 3 4 1 2 2 3 3 4 Air Throw 16 18 18 20 20 22 16 18 18 20 20 22 16 18 18 20 20 22 16 18 18 20 20 22 Defrost Watts 1050 1500 2100 2100 3000 3600 1050 1500 2100 2100 3000 3600 1050 1500 2100 2100 3000 3600 1050 1500 2100 2100 3000 3600 Dimensions (mm) L W H 1061 592 641 1711 592 641 1711 592 641 2361 592 643 2361 592 643 2811 592 645 1061 592 641 1711 592 641 1711 592 641 2361 592 643 2361 592 643 2811 592 645 1061 592 641 1711 592 641 1711 592 641 2361 592 643 2361 592 643 2811 592 645 1062 592 641 1711 592 641 1711 592 641 2361 592 643 2361 592 643 2811 592 645 Connections Liq Suct. 5/8 7/8 1-1/8 1-3/8 1-1/8 1-3/8 1-1/8 1-5/8 1-1/8 1-5/8 1-5/8 1-5/8 5/8 7/8 7/8 1-1/8 1-1/8 1-3/8 1-1/8 1-3/8 1-1/8 1-5/8 1-5/8 1-5/8 7/8 1-1/8 1-1/8 1-3/8 1-1/8 1-5/8 1-1/8 1-5/8 1-5/8 1-5/8 1-5/8 2-1/8 7/8 1-1/8 1-1/8 1-3/8 1-1/8 1-5/8 1-1/8 1-5/8 1-5/8 1-5/8 1-5/8 2-1/8 All models should be fitted with externally equalised expansion valves. Application: Model SKB**R SKB**R+E1K SKB**L SKB**L+E1K SKB**E SKB**C Air Inlet Temperature +10°C/+2°C +10°C/-5°C +10°C/+2°C +10°C/-5°C -10°C/-25°C -10°C/-25°C Fin Spacing 4.23 mm (6 fpi) 4.23 mm (6 fpi) 6.35 mm (4 fpi) 6.35 mm (4 fpi) 4.25 mm (6 fpi) 6.35 mm (4 fpi) Defrost None Electric None Electric Heavy Duty Electric Heavy Duty Electric Standard Conditions: Condition SC 2 SC 3 SC 4 Air Inlet Temperature 0°C -18°C -25°C Evaporating Temperature -8°C -25°C -31°C www.fsw.uk.com Standard TD 8K 7K 6K 75 Friga-Bohn TA Evaporators TA Evaporators are dual discharge and designed for installation in Cold Rooms, Airlocks, Laboratories, Preparation and Packing Rooms. They come with a choice of fin spacing and fan speed - please see application notes below. Defrost heaters can be supplied if required. Code Model High Temperature H500 TA1R4P H501 TA2R4P H502 TA3R4P H503 TA4R4P H504 TA5R4P H505 TA6R4P H506 TA7R4P Duty - Watts at SC 1 (10KTD) 5200 7970 9870 10780 14970 18340 21860 Duty - Watts at SC 2 (8KTD) 3380 5310 6530 7000 9930 12180 14420 High Temperature at SC 1 (10KTD) at SC 2 (8KTD) H510 H511 H512 H513 H514 H515 H516 TA1R6P TA2R6P TA3R6P TA4R6P TA5R6P TA6R6P TA7R6P 3930 6090 7460 8060 11260 13211 16323 High Temperature H520 H521 H522 H523 H524 H525 H526 TA1R8P TA2R8P TA3R8P TA4R8P TA5R8P TA6R8P TA7R8P at SC 1 (10KTD) 3290 5080 6211 6700 9350 10690 13490 2611 4090 4990 5370 7550 8890 10900 at SC 2 (8KTD) 2200 3420 4181 4500 6320 7330 9131 Application: Model TA*R4P TA*R6P TA*R8P Air Inlet Temperature +15°C/+2°C (See Note) +15°C/+2°C (See Note) +15°C/+2°C (See Note) Fin Spacing 3.63 mm (7 pfi) 3.63 mm (7 pfi) 3.63 mm (7 pfi) Fan Motors 4 Pole - 1500 RPM 6 Pole - 1000 RPM 8 Pole - 750 RPM NOTE:For applications with an air inlet temperature of below +2°C defrost heaters will be necessary. Standard Conditions: Condition SC 1 SC 2 Air Inlet Temperature +10°C 0°C Evaporating Temperature 0°C -8°C Standard TD 10K 8K The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. 76 Sales Office: 01543 437 010 Friga-Bohn TA Evaporators Specification: Model TA1R4P TA2R4P TA3R4P TA4R4P TA5R4P TA6R4P TA7R4P TA1R6P TA2R6P TA3R6P TA4R6P TA5R6P TA6R6P TA7R6P TA1R8P TA2R8P TA3R8P TA4R8P TA5R8P TA6R8P TA7R8P Air Vol. cu.m/hr 1995 4390 4170 3985 6255 5755 7975 1310 2910 2750 2615 4125 3765 5230 945 2100 1980 1895 2975 2730 3785 Fans 1 2 2 2 3 3 4 1 2 2 2 3 3 4 1 2 2 2 3 3 4 Air Throw 10 12 11 10 11 10 10 7 7 7 7 7 6 7 5 6 5 5 5 5 5 Sound Level 39 42 42 42 44 44 45 29 32 32 32 34 34 35 22 25 25 25 27 27 28 Dimensions (mm) L W H 866 800 344 1366 800 344 1366 800 344 1366 800 344 1866 800 344 1866 800 344 2366 800 344 866 800 344 1366 800 344 1366 800 344 1366 800 344 1866 800 344 1866 800 344 2366 800 344 866 800 344 1366 800 344 1366 800 344 1366 800 344 1866 800 344 1866 800 344 2366 800 344 Connections Liq Suct. 5/8 5/8 5/8 5/8 5/8 7/8 5/8 7/8 5/8 7/8 5/8 1-1/8 5/8 1-1/8 5/8 5/8 5/8 5/8 5/8 7/8 5/8 7/8 5/8 7/8 5/8 1-1/8 5/8 1-1/8 5/8 5/8 5/8 5/8 5/8 7/8 5/8 7/8 5/8 7/8 5/8 1-1/8 5/8 1-1/8 Sound pressure levels are given in dB(A) at Lp 4m (3) All models should be fitted with externally equalised expansion valves. Defrost Kits Code H560 H561 H562 H563 H564 H565 H566 Model KT6B01E1K KT6B02E1K KT6B03E1K KT6B04E1K KT6B05E1K KT6B06E1K KT6B07E1K To suit Model TA1*** TA2*** TA3*** TA4*** TA5*** TA6*** TA7*** Defrost Watts 800 800 1200 1600 1800 3000 3200 www.fsw.uk.com 77 Friga-Bohn GT2I Evaporators GT21 Evaporators are dual discharge and designed for installation in Cold Rooms, Airlocks, Laboratories, Preparation and Packing Rooms. They come with a choice of fin spacing and fan speeds - please see application notes on facing page. Defrost heaters can be supplied if required. Code Model High Temperature H650 GT2I 24R 6/8P H651 GT2I 26R 6/8P H652 GT2I 28R 6/8P H653 GT2I 34R 6/8P H654 GT2I 36R 6/8P H655 GT2I 38R 6/8P H656 GT2I 44R 6/8P H657 GT2I 46R 6/8P H658 GT2I 48R 6/8P Duty - Watts at SC 1 (10KTD) 47910 57660 61560 71950 86430 90610 96100 112690 123330 Duty - Watts at SC 2 (8KTD) 26650 33500 37560 40150 50250 55620 53620 66480 75350 High Temperature at SC 1 (10KTD) at SC 2 (8KTD) 40810 46030 49910 61220 69110 74270 81740 93970 99610 23340 27880 31050 35090 41920 46440 46820 57000 62500 at SC 1 (10KTD) at SC 2 (8KTD) 42620 52780 58740 63990 76710 86870 85410 104550 117680 24090 30830 35610 36200 45590 52870 48310 61830 71400 at SC 1 (10KTD) at SC 2 (8KTD) 35790 43200 47880 53770 64870 71690 70990 87710 96210 20800 26220 29850 31220 39400 44640 41810 53230 59740 H660 H661 H662 H663 H664 H665 H666 H667 H668 GT2I 24R 8/12P GT2I 26R 8/12P GT2I 28R 8/12P GT2I 34R 8/12P GT2I 36R 8/12P GT2I 38R 8/12P GT2I 44R 8/12P GT2I 46R 8/12P GT2I 48R 8/12P High Temperature H670 H671 H672 H673 H674 H675 H676 H677 H678 GT2I 24L 6/8P GT2I 26L 6/8P GT2I 28L 6/8P GT2I 34L 6/8P GT2I 36L 6/8P GT2I 38L 6/8P GT2I 44L 6/8P GT2I 46L 6/8P GT2I 48L 6/8P High Temperature H680 H681 H682 H683 H684 H685 H686 H687 H688 GT2I 24L 8/12P GT2I 26L 8/12P GT2I 28L 8/12P GT2I 34L 8/12P GT2I 36L 8/12P GT2I 38L 8/12P GT2I 44L 8/12P GT2I 46L 8/12P GT2I 48L 8/12P Standard Conditions: Condition SC 1 SC 2 Air Inlet Temperature +10°C 0°C Evaporating Temperature 0°C -8°C Standard TD 10K 8K The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. Please see facing page for application notes. 78 Sales Office: 01543 437 010 Friga-Bohn GT2I Evaporators Specification: Model Air Vol. GT2I cu.m/hr 24R 6/8P 20550 26R 6/8P 18440 28R 6/8P 16910 34R 6/8P 30820 36R 6/8P 27660 38R 6/8P 25370 44R 6/8P 41090 46R 6/8P 36880 48R 6/8P 33820 24R 8/12P 15470 26R 8/12P 13770 28R 8/12P 12550 34R 8/12P 23210 36R 8/12P 20600 38R 8/12P 18830 44R 8/12P 30940 46R 8/12P 27540 48R 8/12P 25110 24L 6/8P 21800 26L 6/8P 19540 28L 6/8P 18040 34L 6/8P 32700 36L 6/8P 29300 38L 6/8P 27060 44L 6/8P 43600 46L 6/8P 39070 48L 6/8P 36080 24L 8/12P 16060 26L 8/12P 14700 28L 8/12P 13440 34L 8/12P 24080 36L 8/12P 22050 38L 8/12P 20160 44L 8/12P 32110 46L 8/12P 29400 48L 8/12P 26880 Fans 2 2 2 3 3 3 4 4 4 2 2 2 3 3 3 4 4 4 2 2 2 3 3 3 4 4 4 2 2 2 3 3 3 4 4 4 Air Throw 17 M 15 M 14 M 17 M 15 M 14 M 17 M 15 M 14 M 12 M 11 M 10 M 12 M 11 M 10 M 12 M 11 M 10 M 18 M 16 M 15 M 18 M 16 M 15 M 18 M 16 M 15 M 11 M 10 M 9M 11 M 10 M 9M 11 M 10 M 9M Sound 6P / 8P 50 / 46 50 / 46 50 / 46 52 / 48 52 / 48 52 / 48 53 / 49 53 / 49 53 / 49 43 / 38 43 / 38 43 / 38 45 / 40 45 / 40 45 / 40 46 / 41 46 / 41 46 / 41 50 / 46 50 / 46 50 / 46 52 / 48 52 / 48 52 / 48 53 / 49 53 / 49 53 / 49 43 / 38 43 / 38 43 / 38 45 / 40 45 / 40 45 / 40 46 / 41 46 / 41 46 / 41 Dimensions (mm) L W H 2662 1445 684 2662 1445 684 2662 1445 684 3714 1445 684 3714 1445 684 3714 1445 684 4766 1445 684 4766 1445 684 4766 1445 684 2662 1445 684 2662 1445 684 2662 1445 684 3714 1445 684 3714 1445 684 3714 1445 684 4766 1445 684 4766 1445 684 4766 1445 684 2662 1445 684 2662 1445 684 2662 1445 684 3714 1445 684 3714 1445 684 3714 1445 684 4766 1445 684 4766 1445 684 4766 1445 684 2662 1445 684 2662 1445 684 2662 1445 684 3714 1445 684 3714 1445 684 3714 1445 684 4766 1445 684 4766 1445 684 4766 1445 684 Connections Liquid Suction 7/8 1-5/8 1-1/8 1-5/8 1-1/8 1-5/8 1-1/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-5/8 1-5/8 2-5/8 7/8 1-3/8 7/8 1-5/8 7/8 1-5/8 1-1/8 2-1/8 1-1/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-5/8 2-5/8 7/8 1-5/8 7/8 1-5/8 1-1/8 1-5/8 1-1/8 2-1/8 1-1/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-5/8 1-5/8 2-5/8 5/8 1-3/8 7/8 1-3/8 7/8 1-3/8 7/8 1-5/8 1-1/8 1-5/8 1-3/8 2-1/8 1-1/8 2-1/8 1-3/8 2-1/8 1-5/8 2-1/8 All motors are 400 volt, 3 PH, Dual Speed. Duties, air volumes, air throw and sound levels are all quoted using the higher of the two speeds. If you require data for the lower speeds please contact our sales office. Sound pressure levels are given in dB(A) at 4 Metres. All models should be fitted with externally equalised expansion valves. Model GT21 **R GT21 **L Air Inlet Temperature +15°C/-1°C (See Note) +15°C/-1°C (See Note) Fin Spacing 4.23 mm (6 fpi) 7.00 mm (3.6 fpi) Fan Motors 4 Pole - 1500 RPM 6 Pole - 1000 RPM NOTE: For applications with an air inlet temperature of below +5°C defrost heaters will be necessary. Defrost Kits Code H690 H691 H692 Model KT6C18872 KT6C18873 KT6C18874 To Suit Model GT21 24, 26, 28 GT21 34, 36, 38 GT21 44, 46, 48 Defrost Watts 9000 13800 18000 www.fsw.uk.com 79 Friga-Bohn Spares Code H910 H911 H912 H913 H914 H915 H916 H917 H918 H919 H920 Description Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Motor/Fan Assembly Part Number PD3502900 PD0210300 PD0210290 PD5F00000 PD6B04200 PD6B06200 PD6B08200 PD0210420 PD0210430 PD0210440 PD0210030 H921 Motor/Fan Assembly PD0210140 H922 Motor/Fan Assembly PD0210160 H923 H924 H925 Motor/Fan Assembly Motor/Fan Assembly 1ph Motor PD5900000 PDVE00093 PD3507000 H930 H931 H932 H933 H934 H935 H936 H937 H940 Defrost Heater Defrost Heater Defrost Heater Defrost Heater Defrost Heater Defrost Heater Defrost Heater Defrost Heater Heater - Coil or Tray PD650483C PD650484C PD650569C PD6A3315B PD6A3316B PD6A3314B PD6A3300B PD6A3299B PD0101136 H941 Heater - Coil or Tray PD0101137 H942 Heater - Coil or Tray PD0101138 H943 Heater - Coil or Tray PD0101139 H944 Heater - Coil or Tray PD0101140 80 To Suit MF/MFE & MR/MRE XR60, 72, 80 & 90 XR85, 100, 105 &122 SD – All Models TA – 04P/230V/1/50Hz TA – 06P/230V/1/50Hz TA – 08P/230V/1/50Hz GTI – 04P/50Hz GTI – 06P/50Hz GTI – 08P/50Hz MUC145R to MUC620R LUC150C to LUC645C MUC780R LUC835C MUC 960R LUC1025C SK All Models SKB All Models MUC780R LUC835C MUC 960R LUC1025C MFE 1 MFE 2 MFE 3 & 4 MRE 75 MRE 110 MRE 135 MRE 210 MRE 270 SD024, 030, 038R SD021, 027, 035C SD052R SD048C SD062R SD073C SD082, 104, 118R SD095, 110C SD148, 158R SD136, 148C Sales Office: 01543 437 010 Friga-Bohn Spares Code H950 H951 H952 H953 H954 H955 H956 H957 H958 H960 H961 H962 H963 H964 H965 H966 H967 H970 H971 H972 H973 H974 H975 H976 H977 H978 H979 Description E1K Kit E1K Kit E1K Kit E1K Kit E1K Kit E1K Kit E1K Kit E1K Kit E1K Kit Coil Heater Coil Heater Coil Heater Coil Heater Tray Heater Tray Heater Tray Heater Tray Heater Coil Heater Coil Heater Coil Heater Coil Heater Coil Heater Tray Heater Tray Heater Tray Heater Tray Heater Tray Heater Part Number KT5C0747C KT5C0748C KT5C0749C KT5C0750C KT5C0751C KT5C0752C KT5C0753C KT5C0754C KT5C6755C PD0310010 PD0310020 PD0310030 PD0310040 PD0320010 PD0320020 PD0320030 PD0320040 PD010594C PD010592C PD010624C PD010593C PD010625C PD020636C PD020589C PD020637C PD020588C PD020590C To Suit MUC145R MUC200R MUC285R MUC320R MUC420R MUC520R MUC620R MUC780R MUC960R LUC150, 205C LUC290, 345C LUC435, 545C LUC645, 835, 1015C LUC150, 205C LUC290, 345C LUC435, 545C LUC645, 835, 1015C SK10R, SK08C SK12R, SK10C SK16R, SK12C SK19R, SK15C SK24R, SK19C SK10R, SK08C SK12R, SK10C SK16R, SK12C SK19R, SK15C SK24R, SK19C www.fsw.uk.com 81 GEA Searle The NEW TEC Cooler The next generation in cooling TEC Cooler The TEC range of nine small ‘blow through’ unit coolers using high efficiency EC fans as standard, provid a significant reduction in energy consumption and therefore running costs. With a wide operating range + 10 °C to -40 °C, the coolers are suitable for both high, medium and low temperature applications. High efficiency EC fans Motor power input of only 20W, a 67% saving Vs TG 1, 2 or 3 fan configurations Ceiling or wall mounted Pleasing aesthetic design Motors suitable for 230V, single phase, 50 / 60 Hz supply, www.searle.co.uk GEA Heat Exchangers GEA Searle 82 Sales Office: 01543 437 010 www.fsw.uk.com 83 Searle - TEC Unit Cooler TEC is a range of nine small ‘blow through’ unit coolers using high efficiency EC fans as standard, providing a significant reduction in energy consumption and therefore running costs. With a wide operating range + 10 °C to -40 °C, the coolers are suitable for both high, medium and low temperature applications in areas such as reach-in and walk - in cold cabinets, small cold rooms and similar situations. Nominal capacities are from 0.52kW to 3.4kW (Standard Condition 2) when used with low ozone depletion refrigerants such as R134a, R404A and R507A Code Fan Coil Duty - Watts 5mm Fin Spacing R1000 TEC1-5FPI-NO DEFROST R1001 TEC2-5FPI-NO DEFROST R1002 TEC3-5FPI-NO DEFROST R1003 TEC3.5-5FPI-NO DEFROST R1004 TEC4-5FPI-NO DEFROST R1005 TEC5-5FPI-NO DEFROST R1006 TEC6-5FPI-NO DEFROST R1007 TEC7-5FPI-NO DEFROST R1008 TEC8-5FPI-NO DEFROST at SC2 (8KTD) 0.52 0.84 1.00 1.15 1.61 1.89 2.14 2.76 3.18 7mm Fin Spacing R1020 TEC1-7FPI-NO DEFROST R1021 TEC2-7FPI-NO DEFROST R1022 TEC3-7FPI-NO DEFROST R1023 TEC3.5-7FPI-NO DEFROST R1024 TEC4-7FPI-NO DEFROST R1025 TEC5-7FPI-NO DEFROST R1026 TEC6-7FPI-NO DEFROST R1027 TEC7-7FPI-NO DEFROST R1028 TEC8-7FPI-NO DEFROST 0.57 0.89 1.04 1.25 1.72 2.04 2.29 3.02 3.40 W/Mounted Drain Tray Kits Code Model R1035 WT1/2-PAN R1036 WT3-PAN R1037 WT3.5/4-PAN R1038 WT5-PAN R1039 WT6-PAN R1040 WT7-PAN R1041 WT8-PAN E/Defrost Kits (Ceiling Mounted) Code Model R1042 T1-LTKIT R1043 T2-LTKIT R1044 T3-LTKIT R1045 T3.5/4-LTKIT R1046 T5/6-LTKIT R1047 T7/8-LTKIT E/Defrost Kits (Wall Mounted) Code Model R1048 WT1/2-LTKIT R1049 WT3-LTKIT R1050 WT3.5/4-LTKIT R1051 WT5-LTKIT R1052 WT6-LTKIT R1053 WT7/8-LTKIT Specification: Model Fin Spacing TEC1-5FPI TEC2-5FPI TEC3-5FPI TEC3.5-5FPI TEC4-5FPI TEC5-5FPI TEC6-5FPI TEC7-5FPI TEC8-5FPI 84 Fans 1 1 1 1 2 2 2 3 3 Air Vol. cu/m hr 5mm, 7mm 580(5), 540(7) 520(5), 490(7) 580(5), 550(7) 620(5), 590(7) 1010(5), 950(7) 1120(5), 1080(7) 1210(5), 1080(7) 1690(5), 1620(7) 1810(5), 1730(7) Connections Inlet. Outlet. 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 7/8" 7/8" Dimensions (mm) H W D 180 180 180 180 180 180 230 180 230 Sales Office: 01543 437 010 525 525 690 865 865 1120 1120 1528 1528 375 375 375 375 375 375 375 375 375 Weight. (kg) 7.3 8.2 9.8 12 13.7 16.4 18.5 24 26.9 Searle - KEC Unit Cooler The GEA Searle KEC cooler is the next generation of Unit Cooler, with market leading performance, noise levels and energy efficiency. Using EC Technology as standard across the range, the Power Input for the KEC cooler is typically 50% that of other cooler motors. The KEC coolers cover a capacity range from 1.2 – 10.7kW and are ideally suited for cold room applications and cool cabinets. The range has a modern aesthetic design and is easy to install and maintain. Code Fan Coil Duty - Watts 4mm Fin Spacing R2020 KEC10-4MM AL NO DEFROST R2021 KEC15-4MM AL NO DEFROST R2022 KEC20-4MM AL NO DEFROST R2023 KEC25-4MM AL NO DEFROST R2024 KEC30-4MM AL NO DEFROST R2025 KEC35-4MM AL NO DEFROST R2026 KEC40-4MM AL NO DEFROST R2027 KEC45-4MM AL NO DEFROST R2028 KEC55-4MM AL NO DEFROST R2029 KEC70-4MM AL NO DEFROST R2040 R2041 R2042 R2043 R2044 R2045 R2046 R2047 R2048 R2049 KEC10-4MM AL EL DEFROST KEC15-4MM AL EL DEFROST KEC20-4MM AL EL DEFROST KEC25-4MM AL EL DEFROST KEC30-4MM AL EL DEFROST KEC35-4MM AL EL DEFROST KEC40-4MM AL EL DEFROST KEC45-4MM AL EL DEFROST KEC55-4MM AL EL DEFROST KEC70-4MM AL EL DEFROST at SC2 (8KTD) 1.65 2.01 2.35 3.00 3.73 4.57 5.84 6.99 8.79 10.51 1.65 2.01 2.35 3.00 3.73 4.57 5.84 6.99 8.79 10.51 6mm Fin Spacing R2060 KEC10-6MM AL NO DEFROST R2061 KEC15-6MM AL NO DEFROST R2062 KEC20-6MM AL NO DEFROST R2063 KEC25-6MM AL NO DEFROST R2064 KEC30-6MM AL NO DEFROST R2065 KEC35-6MM AL NO DEFROST R2066 KEC40-6MM AL NO DEFROST R2067 KEC45-6MM AL NO DEFROST R2068 KEC55-6MM AL NO DEFROST R2069 KEC70-6MM AL NO DEFROST 1.34 1.72 1.99 2.38 3.16 3.85 4.63 5.97 7.00 8.98 R2080 R2081 R2082 R2083 R2084 R2085 R2086 R2087 R2088 R2089 1.34 1.72 1.99 2.38 3.16 3.85 4.63 5.97 7.00 8.98 KEC10-6MM AL EL DEFROST KEC15-6MM AL EL DEFROST KEC20-6MM AL EL DEFROST KEC25-6MM AL EL DEFROST KEC30-6MM AL EL DEFROST KEC35-6MM AL EL DEFROST KEC40-6MM AL EL DEFROST KEC45-6MM AL EL DEFROST KEC55-6MM AL EL DEFROST KEC70-6MM AL EL DEFROST The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. www.fsw.uk.com 85 Searle - KEC Unit Cooler Specification: Model 4mm Fin Spacing KEC10-4MM NO DE KEC15-4MM NO DE KEC20-4MM NO DE KEC25-4MM NO DE KEC30-4MM NO DE KEC35-4MM NO DE KEC40-4MM NO DE KEC45-4MM NO DE KEC55-4MM NO DE KEC70-4MM NO DE Fans Air Vol. cu/m hr Connections Inlet. Outlet. Dimensions (mm) H W D 1 1 1 1 1 2 2 2 3 3 0.28 0.28 0.29 0.42 0.40 0.58 0.83 0.81 1.25 1.21 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 393 393 393 393 393 393 393 393 393 393 726 726 876 876 876 1326 1326 1326 1826 1826 460 460 460 460 460 460 460 460 460 460 27 28 33 33 35 47 47 53 67 74 KEC10-4MM EL DE KEC15-4MM EL DE KEC20-4MM EL DE KEC25-4MM EL DE KEC30-4MM EL DE KEC35-4MM EL DE KEC40-4MM EL DE KEC45-4MM EL DE KEC55-4MM EL DE KEC70-4MM EL DE 1 1 1 1 1 2 2 2 3 3 0.28 0.28 0.29 0.42 0.40 0.58 0.83 0.81 1.25 1.21 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 393 393 393 393 393 393 393 393 393 393 726 726 876 876 876 1326 1326 1326 1826 1826 460 460 460 460 460 460 460 460 460 460 27 28 33 33 35 47 47 53 67 74 6mm Fin Spacing KEC10-6MM NO DE KEC15-6MM NO DE KEC20-6MM NO DE KEC25-6MM NO DE KEC30-6MM NO DE KEC35-6MM NO DE KEC40-6MM NO DE KEC45-6MM NO DE KEC55-6MM NO DE KEC70-6MM NO DE 1 1 1 1 1 2 2 2 3 3 0.31 0.31 0.32 0.43 0.42 0.63 0.85 0.83 1.28 1.25 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 393 393 393 393 393 393 393 393 393 393 726 726 876 876 876 1326 1326 1326 1826 1826 460 460 460 460 460 460 460 460 460 460 27 28 33 33 35 47 47 53 67 74 KEC10-6MM EL DE KEC15-6MM EL DE KEC20-6MM EL DE KEC25-6MM EL DE KEC30-6MM EL DE KEC35-6MM EL DE KEC40-6MM EL DE KEC45-6MM EL DE KEC55-6MM EL DE KEC70-6MM EL DE 1 1 1 1 1 2 2 2 3 3 0.31 0.31 0.32 0.43 0.42 0.63 0.85 0.83 1.28 1.25 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 393 393 393 393 393 393 393 393 393 393 726 726 876 876 876 1326 1326 1326 1826 1826 460 460 460 460 460 460 460 460 460 460 27 28 33 33 35 47 47 53 67 74 NO DE = No Electric Defrost, EL DE = With Electric Defrost 86 Sales Office: 01543 437 010 Weight. (kg) Searle - KME Unit Cooler The KMe range of coolers is ideally suited to largecold rooms and small warehouses where an efficient solution is required. The KMe can also be used for industrial food processing and agricultural applications.and cool cabinets. Standard features of the range :- 1/2” OD ‘D’ fin inner grooved copper tube, 4mm, 6mm or 8mm fin spacing, 400mm energy efficient fanset and powder coated galvanised steel case. KMe evaporators available with 3 phase fan motors on request. Code Fan Coil Duty - Watts 4mm Fin Spacing R2100 KME50-4 4AL NO DEFROST R2101 KME60-4 4AL NO DEFROST R2102 KME80-4 4AL NO DEFROST R2103 KME95-4 4AL NO DEFROST R2104 KME115-4 4AL NO DEFROST R2105 KME140-4 4AL NO DEFROST R2106 KME175-4 4AL NO DEFROST 4mm Fin Spacing R2120 KME50-4L 4AL EL DEFROST R2121 KME60-4L 4AL EL DEFROST R2122 KME80-4L 4AL EL DEFROST R2123 KME95-4L 4AL EL DEFROST R2124 KME115-4L 4AL EL DEFROST R2125 KME140-4L 4AL EL DEFROST R2126 KME175-4L 4AL EL DEFROST at SC2 (8KTD) 7.36 8.70 12.21 14.78 18.41 22.29 27.92 7.36 8.70 12.21 14.78 18.41 22.29 27.92 Code Fan Coil Duty - Watts 6mm Fin Spacing - No Defrost at SC2 (8KTD) R2130 KME50-6 6AL NO DEFROST 6.20 R2131 KME60-6 6AL NO DEFROST 7.45 R2132 KME80-6 6AL NO DEFROST 9.74 R2133 KME95-6 6AL NO DEFROST 12.50 R2134 KME115-6 6AL NO DEFROST 14.62 R2135 KME140-6 6AL NO DEFROST 18.70 R2136 KME175-6 6AL NO DEFROST 23.86 6mm Fin Spacing - With Defrost R2140 KME50-6L 6AL EL DEFROST 6.20 R2141 KME60-6L 6AL EL DEFROST 7.45 R2142 KME80-6L 6AL EL DEFROST 9.74 R2143 KME95-6L 6AL EL DEFROST 12.50 R2144 KME115-6L 6AL EL DEFROST 14.62 R2145 KME140-6L 6AL EL DEFROST 18.70 R2146 KME175-6L 6AL EL DEFROST 23.86 The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. KMe Options Aerofoil fans 3PH 50Hz Aerofoil fans 3PH 60 Hz KMe 400mm EC Fans KMe Peripheral Heater KMe Fan Plate Heater KMe Air Streamer Cooler Guard Stainless Steel Casing www.fsw.uk.com 87 Searle - KME Unit Cooler Specification: Model Fans 4mm Fin Spacing - No Defrost KME50-4 4AL 1 KME60-4 4AL 1 KME80-4 4AL 2 KME95-4 4AL 2 KME115-4 4AL 3 KME140-4 4AL 3 KME175-4 4AL 4 4mm Fin Spacing - With Defrost KME50-4 4AL 1 KME60-4 4AL 1 KME80-4 4AL 2 KME95-4 4AL 2 KME115-4 4AL 3 KME140-4 4AL 3 KME175-4 4AL 4 Air Vol. cu/m hr Connections Inlet. Outlet. Dimensions (mm) H W D Weight. (kg) 0.89 0.96 1.89 1.78 2.83 2.68 3.45 1/2" 5/8" 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-3/8" 1-3/8" 1-3/8" 574 574 574 574 574 574 574 1007 1332 1682 1682 2357 2357 2732 540 540 540 540 708 708 708 85 112 129 139 170 195 217 0.89 0.96 1.89 1.78 2.83 2.68 3.45 1/2" 5/8" 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-3/8" 1-3/8" 1-3/8" 574 574 574 574 574 574 574 1007 1332 1682 1682 2357 2357 2732 540 540 540 540 708 708 708 85 112 129 139 170 195 217 The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. Specification: Model Fans 6mm Fin Spacing - No Defrost KME50-6 6AL 1 KME60-6 6AL 1 KME80-6 6AL 2 KME95-6 6AL 2 KME115-6 6AL 3 KME140-6 6AL 3 KME175-6 6AL 4 6mm Fin Spacing - With Defrost KME50-6L 6AL 1 KME60-6L 6AL 1 KME80-6L 6AL 2 KME95-6L 6AL 2 KME115-6L 6AL 3 KME140-6L 6AL 3 KME175-6L 6AL 4 88 Air Vol. cu/m hr Connections Inlet. Outlet. Dimensions (mm) H W D Weight. (kg) 0.98 1.01 2.00 1.95 3.00 2.93 3.86 1/2" 5/8" 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-3/8" 1-3/8" 1-3/8" 574 574 574 574 574 574 574 1007 1332 1682 1682 2357 2357 2732 540 540 540 540 708 708 708 83 109 126 135 166 190 212 0.98 1.01 2.00 1.95 3.00 2.93 3.86 1/2" 5/8" 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-3/8" 1-3/8" 1-3/8" 574 574 574 574 574 574 574 1007 1332 1682 1682 2357 2357 2732 540 540 540 540 708 708 708 83 109 126 135 166 190 212 Sales Office: 01543 437 010 Searle - JG Spares Searle - TEC Spares Code R3010 R3011 R3012 R3013 Code R3035 R3036 R3037 R3038 R3039 R3040 R3045 R3046 R3047 R3048 R3049 R3050 R3055 R3056 R3057 R3060 R3061 R3062 R3063 R3064 R3015 R3016 R3017 R3012 R3013 Description Fan/Motor Assembly All Fan Guard Drain Connection 3/4" BSP JG Gasket for Drain Connection Searle - KMe Spares Code R3150 R3151 R3015 R3017 R3156 R3157 R3158 R3160 R3162 R3165 R3166 R3167 R3168 R3076 R3175 R3109 R3176 R3177 R3178 R3179 R3180 R3181 R3182 R3185 R3186 R3187 R3198 R3199 R3190 R3191 R3192 R3193 R3194 R3195 Description Fanset 400mmDIA 4PL 400-3PH EBM Fanset 400mmDIA 4PL 230-1PH EBM Drain Connection (1" BSP) Drain Connection Gasket Motor Impeller Fan Guard 380/465V, 3Ph, 60Hz, Aerofoil Fan Set Impeller 220/240V, 1Ph, 50/60Hz, Aerofoil Fan Set Motor Impeller Fan Guard 530W 230V U Bend for a KME50 800W 230V U Bend for a KME60 1060W 230V U Bend for KME80 & 95 800W 115V Straight for a KME115 & 140 940W 115V Straight for a KME175 265W 230V Straight for a KME50 400W 230V Straight for a KME60 530W 230V Straight for a KME80 & 95 800W 230V Straight for a KME115 & 140 940W 230V Straight for a KME175 Peripheral Heater 300W Peripheral Heater Kit Fanplate Heater (Caution required due to Plastic Guard) Anticreep clips (1 per coil heater) Defrost Termination Stat (F25) Drain Pan KMe50 Drain Pan KMe60 Drain Pan KMe80 / KMe95 Drain Pan KMe115 / MKe140 Drain Pan KMe175 End Cover KMe All Models Description Defrost Element 275W for a TEC1 Defrost Element 550W for a TEC2 Defrost Element 700W for a TEC3 Defrost Element 900W for a TEC3.5 & 4 Defrost Element 1000W for a TEC5 & 6 Defrost Element 1400W for a TEC7 & 8 Defrost Element 250W WT for TEC1 & 2 Defrost Element 325W WT for TEC3 Defrost Element 425W WT for TEC3.5 & 4 Defrost Element 575W WT for TEC5 Defrost Element 675W WT for TEC6 Defrost Element 470W WT for TEC7 & 8 Heater Clip Heater Clip Heater Clip Drain Tray Heater Guard WT1/2 Drain Tray Heater Guard WT3 Drain Tray Heater Guard WT3.5/4 Drain Tray Heater Guard WT5/6 Drain Tray Heater Guard WT7/8 Drain Connection 1" BSP Drain Connection 1" BSP Gasket 1" Drain Connection 3/4" BSP Gasket 3/4" Searle - KEC Spares Code R3120 R3121 R3015 R3017 R3125 R3126 R3127 R3128 R3140 R3141 R3135 R3136 R3137 R3138 Description F/Set 300mmDIA EC 1 CORE 230V-1ph F/Set 300mmDIA EC 3 CORE 230V-1ph Drain Conn 1inBSP Sealing Washer FOR 1"BSP D/CONN HTR DEF 170W 115V STRT 440mm KEC10/15 HTR DEF 230W 115V STRT 590mm KEC20/25/30 HTR DEF 400W 115V STRT 1.08m KEC35/40/45 HTR DEF 600W 115V STRT 1.54m hot L KEC55/70 Coil HTR Retaining Clamp KEC Range End Cover Drain Pan - Case 400 Drain Pan - Case 550 Drain Pan - Case 1000 Drain Pan - Case 1500 www.fsw.uk.com 89 Searle - TG Spares Searle - DSR Spares Code R3020 R3021 R3022 R3014 R3025 R3026 R3027 R3028 R3029 R3030 R3031 R3032 Description Code R3200 Fan 230mm. 5-Blade, 31° Pitch, 50Hz Fan 230mm. 5-Blade, 20° Pitch, 60Hz Fanguard Fan Plate / Drain Pan TG1,2 Fan Plate / Drain Pan TG3 Fan Plate / Drain Pan TG3-5 Fan Plate / Drain Pan TG4 Fan Plate / Drain Pan TG5 Fan Plate / Drain Pan TG6 Fan Plate / Drain Pan TG7 Fan Plate / Drain Pan TG8 R3201 Motor 15W, 220/240V, 1Ph, 50/60Hz Searle - KS Spares Code R3385 R3386 R3387 R3256 R3388 R3389 R3263 R3390 R3015 R3017 R3312 R3395 R3210 R3396 R3211 R3212 R3397 R3399 R3400 R3405 R3406 R3407 R3408 R3409 R3410 R3411 R3412 R3413 R3414 R3415 90 Description Motor 70W, 220/240V, 1Ph, 50/60Hz Capacitor for 210-070-104 Motor Fan 305mm, 4-Blade,22°, 50/60Hz Fan 310mm, 4-Blade, 36°, 50Hz Fan 310mm, 4-Blade, 28°, 60Hz Fan Cowl Fan Guard Fan Guard Rubber washers Drain Connection (1" BSP) Drain Connection Gasket 575W, 220V, +U' Bend 650W, 220V, +U' Bend 790W, 220V, +U' Bend 1210W, 220V, +U' Bend 1425W, 220V, +U' Bend 2135W, 220V, +U' Bend 1100W, 265V, +U' Bend 60Hz 1950W, 265V, U-Bend 60Hz Heater Clips Drain Pan KS10 & KS15 Drain Pan KS20 Drain Pan KS25 Drain Pan KS35 Drain Pan KS40 Drain Pan KS45 Drain Pan KS55 Drain Pan KS70 Motor Bracket All Models End Panel KS25/40/45/70 End Panel KS10/15/20/35/55 R3205 R3206 R3207 R3208 R3210 R3211 R3212 R3213 R3213 R3214 R3220 R3015 R3017 R3221 R3222 R3223 R3224 R3230 R3231 R3232 R3233 R3235 R3236 R3237 R3238 R3239 R3240 R3245 R3246 R3247 Description Motor 25W, 220/240V, 1Ph, 50/60Hz, 2-Speed (inc Capacitor) Motor 70W, 220/240V, 1Ph, 50/60Hz, Single Speed (inc Capacitor) Fan 305mm, 5-Blades, 24° Pitch, 50Hz, Hubless Fan 305mm, 5-Blades, 20° Pitch, 60Hz, Hubless Fan 305mm, 4-Blades, 32° Pitch, 50Hz, With Hub Fan 305mm, 4-Blades, 26° Pitch, 60Hz, With Hub Defrost HRT 790W, 230V, ‘U' Bend Defrost HRT 1425W, 230V, ‘U' Bend Defrost HRT 2135W, 230V, ‘U' Bend Defrost HRT 2850W, 230V, ‘U' Bend Defrost HRT 2850W, 230V, ‘U' Bend Defrost HRT 985W, 230V, Linked Pair Defrost HRT Sump Heater Assembly Defrost HRT Drain Connection 1" BSP Nut Defrost HRT Drain Gasket Defrost HRT Thermostat, Ranco F25-107 Defrost HRT Time Switch AFR1121s, 50Hz Defrost HRT Time Switch AFR4121s, 60Hz Defrost HRT Thermal Cut-out (for Air Heaters) Fanplate / Draintray DSR 12, 19, 22 Fanplate / Draintray DSR 36, 42 Fanplate / Draintray DSR 51, 62 Fanplate / Draintray DSR 68, 83, 100, 116 TRIAC RVM-5E 230V 1PH 50/60Hz 4.5A TRIAC REE-50 230V 1PH 50/60hZ 5.0A Junction Box 264x214x110mm - 03752 TRIAC 5A COMP WITH J/BOX Condensate Pump with remote sensor Insulated sump heater assembly 1kW Heater Kit 2kW Heater Kit 3kW Heater Kit Sales Office: 01543 437 010 Searle - KM Spares Searle - KM Spares - Serial No. 7xx / 8xx / 9xx Code R3325 R3326 R3327 Code R3325 R3326 R3327 R3350 R3351 R3328 R3329 R3330 R3015 R3017 Description Motor 200W, 220/240V-1-50/60Hz Capacitor for 210-200-104 motor Motor 200W, 380/440V-3-50/60Hz Fan 380mm, 4-Blade,34°, 50Hz (Rear Hub, from serial no. 887009) Fan 380mm, 4-Blade,24°, 60Hz (Rear Hub, from serial no. 887009) Plastic Fan Guard Drain Connection (1" BSP) R3329 Drain Connection Gasket Impeller R3281 R3355 R3356 R3357 Fan Guard R3358 Axial Fan Set 26°Pitch, 415V, 3Ph, 50Hz R3156 R3157 R3158 R3160 R3162 R3165 R3166 R3167 R3168 R3076 R3175 R3109 R3176 R3177 R3178 R3179 R3180 R3181 R3182 R3185 R3186 R3187 R3198 R3199 R3335 R3336 R3337 R3338 R3339 R3340 R3341 R3345 R3346 R3347 R3348 R3328 Motor 380/465V, 3Ph, 60Hz, Aerofoil Fan Set Impeller 220/240V, 1Ph, 50/60Hz, Aerofoil Fan Set Motor Impeller Fan Guard Coil HTR 530W 230V U Bend Coil HTR 800W 230V U Bend Coil HTR 1060W 230V U Bend Coil HTR 800W 115V Straight Coil HTR 940W 115V Straight Draintray HTR 265W 230V Straight R3359 R3365 R3366 R3367 R3368 R3369 R3400 R3081 R3377 R3378 R3379 Description Motor 200W, 220/240V-1-50/60Hz Capacitor for 210-200-104 motor Motor 200W, 380/440V-3-50/60Hz Fan 380mm, 4-Blade,34°, 50Hz (Front Hub) Fan 380mm, 4-Blade,24°, 60Hz (Front Hub) Fan 380mm, 4-Blade,34°, 50Hz (Rear Hub, from serial no. 887009) Fan 380mm, 4-Blade,24°, 60Hz (Rear Hub, from serial no. 887009) Fan Guard Coil HTR 330W, 110V, Straight KM50 Coil HTR 500W, 110V, Straight KM60 Coil HTR 665W, 110V, Straight KM80 & KM95 Coil HTR 1000W, 110V, Straight KM115 & KM140 Coil HTR 1165W, 110V, Straight KM175 Drain Pan HTR165W, 110V, Straight KM50 Drain Pan HTR250W, 110V, Straight KM60 Drain Pan HTR335W, 110V, Straight KM80 & KM95 Drain Pan HTR500W, 110V, Straight KM115 & KM140 Drain Pan HTR585W, 110V, Straight KM175 Heater Clips Heater Clips (anti-creep) End Panel End Panel Air Straightener Draintray HTR 400W 230V Straight Draintray HTR 530W 230V Straight Draintray HTR 800W 230V Straight Draintray HTR 940W 230V Straight Peripheral Heater 300W Peripheral Heater Kit Fanplate Heater (Caution required due to Plastic Guard) Anticreep clips (1 per coil heater) Defrost Termination Stat (F25) Drain Pan KM50 Drain Pan KM60 Drain Pan KM80 Drain Pan KM95 Drain Pan KM115 Drain Pan KM140 Drain Pan KM175 Motor Bracket ( from serial no. 123679) (2 required per motor) Motor Bracket (up to serial no. 123678) End panel (All KM except KM80 & KM115 End panel (KM80 and KM115) www.fsw.uk.com 91 LU-VE SHP Ceiling Mount Panel Coolers The SHP coolers have been designed for reach-in cabinets. The range consists of two models with nominal capacities of 470 and 580 watts. The coolers are suitable for operating temperature of between -21°C and +15°C. The casings are easily removed to provide easy access for installation, service and cleaning. For room temperatures below +2°C electric defrost models must be used. 4.3 mm Fin Spacing. Code Model Duty - Watts High Temperature at SC 2 (8KTD) R100 SHP6N 352 R102 SHP9N 435 Electric Defrost R104 SHP6E R106 SHP9E - Duty - Watts at SC 3 (7KTD) 258 319 LU-VE SHS Ceiling Mount Panel Coolers The SHS coolers have been designed for small cold rooms and reach-in cabinets. The range consists of eight models covering nominal capacities between 700 and 2290 watts. The SHS coolers utilise LU’VE’s super efficient Turbocoil2 coils. The coolers are low noise with the added benefit of low energy consumption. The coolers are suitable for operating temperature of between -21°C and +15°C. The casings are easily removed to provide easy access for installation, service and cleaning. For room temperatures below + 2°C electric defrost models must be used. 5.0 mm Fin Spacing. Code Model High Temperature at SC 2 (8KTD) R110 SHS 8N 518 R111 SHS12N 577 R112 SHS13N 703 R113 SHS15N 770 R114 SHS18N 1058 R115 SHS22N 1162 R116 SHS26N 1517 R117 SHS32N 1695 Electric Defrost R120 SHS 8E R121 SHS12E R122 SHS13E R123 SHS15E R124 SHS18E R125 SHS22E R126 SHS26E R127 SHS32E at SC 2 (8KTD) - Duty - Watts at SC 3 (7KTD) at SC 3 (7KTD) 385 429 523 572 787 864 1128 1260 The above duties will need correcting to the actual temperature difference. The duties indicted have been calculated using R404A. for other refrigerants please Contact us for the relevant correction factor. Please see facing page for application notes. 92 Sales Office: 01543 437 010 LU-VE SHF Compact Coolers The SHF coolers have been designed for refrigerated cabinets. 5.5 mm Fin Spacing. Code Model High Temperature R700 SHF 50S R701 SHF 60S R702 SHF 70S R703 SHF 55D R704 SHF 65D Duty - Watts at SC 2 (8KTD) 388 462 536 454 520 Duty - Watts at SC 3 (7KTD) - - 294 350 406 344 394 Electric Defrost R710 SHF 50SE R711 SHF 60SE R712 SHF 70SE R713 SHF 55DE R714 SHF 65DE Specification: Air Vol. No of Air Model cu.m/hr Fans Throw 4.3mm Fin Spacing (154mm Blades) SHP6 220 1 3.0 M SHP9 200 1 3.0 M 5.0mm Fin Spacing (230mm Blades) SHS 8 440 1 SHS12 440 1 SHS13 500 1 SHS15 500 1 SHS18 850 2 SHS22 850 2 SHS26 980 2 SHS32 1250 3 5.5mm Fin Spacing (154mm Blades) Defrost Watts * Dimensions (mm) Motor A B Amps Connections In Out Weight Kg 270 270 390 390 315 315 0.26 0.26 8 mm 8 mm 8 mm 8 mm 2.7 2.9 335 335 460 460 585 585 825 825 493 493 647 647 803 803 1126 1126 374 374 524 524 674 674 974 974 0.22 0.22 0.22 0.22 0.22 0.30 0.30 0.30 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 5.1 5.2 6.1 6.2 8.6 8.7 10.8 12.3 SHF 50S 240 1 3.1 M 330 382 350 0.26 8 mm 8 mm 3.9 SHF 60S SHF 70S SHF 55D SHF 65D 265 345 310 325 1 2 2 2 3.4 M 2.9 M 2 x 2.0 M 2 x 2.2 M 450 450 330 450 472 472 382 472 440 440 350 440 0.26 0.52 0.52 0.52 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 4.6 5.6 4.7 5.6 Standard Conditions: Condition SC 2 SC 3 Air Inlet Temperature 0°C -18°C Evaporating Temperature -8°C -25°C Standard TD 8K 7K www.fsw.uk.com 93 LU-VE SHA Panel Coolers The SHA angled coolers have been designed for small cold rooms. 3.1 mm Fin Spacing. Code Model Duty - Watts High Temperature at SC 2 (8KTD) R200 SHA 30-32 1295 R201 SHA 40-32 1628 R202 SHA 60-32 2664 R203 SHA 80-32 3256 R204 SHA120-32 4995 R205 SHA160-32 6586 Electric Defrost R210 SHA 30-32 R211 SHA 40-32 R212 SHA 60-32 R213 SHA 80-32 R214 SHA120-32 R215 SHA160-32 - Duty - Watts at SC 3 (7KTD) 962 1210 1980 2420 3712 4895 4.8 mm Fin Spacing. High Temperature at SC 2 (8KTD) R220 SHA 21-50 1073 R221 SHA 27-50 1369 R222 SHA 41-50 2220 R223 SHA 53-50 2738 R224 SHA 79-50 4255 R225 SHA106-50 5661 at SC 3 (7KTD) - Electric Defrost R230 SHA 21-50E R231 SHA 27-50E R232 SHA 41-50E R233 SHA 53-50E R234 SHA 79-50E R235 SHA106-50E at SC 2 (8KTD) - at SC 3 (7KTD) 797 1017 1650 2035 3162 4207 7.7 mm Fin Spacing. High Temperature at SC 2 (8KTD) R240 SHA 14-80 814 R241 SHA 17-80 1036 R242 SHA 28-80 1702 R243 SHA 35-80 2072 R244 SHA 52-80 3219 R245 SHA 70-80 4366 at SC 3 (7KTD) - Electric Defrost R250 SHA 14-80E R251 SHA 17-80E R252 SHA 28-80E R253 SHA 35-80E R254 SHA 52-80E R255 SHA 70-80E at SC 3 (7KTD) 605 770 1265 1540 2392 3245 at SC 2 (8KTD) - The above duties will need correcting to the actual temperature difference. The duties indicted have been calculated using R404A. for other refrigerants please Contact us for the relevant correction factor. Please see facing page for application notes. 94 Sales Office: 01543 437 010 LU-VE SHA Unit Coolers Specification: Air Vol. No of Air Model cu.m/hr Fans Throw 3.1mm Fin Spacing (275mm Blades) SHA 30-32 550 1 8M SHA 40-32 650 1 8M SHA 60-32 1100 2 9M SHA 80-32 1300 2 9M SHA120-32 1950 3 10 M SHA160-32 2600 4 11 M 4.8mm Fin Spacing (275mm Blades) SHA 21-50 600 1 9M SHA 27-50 720 1 9M SHA 41-50 1200 2 10 M SHA 53-50 1440 2 10 M SHA 79-50 2160 3 11 M SHA106-50 2880 4 12 M 7.7mm Fin Spacing (275mm Blades) SHA 14-80 670 1 10 M SHA 17-80 750 1 10 M SHA 28-80 1340 2 11 M SHA 35-80 1500 2 11 M SHA 52-80 2250 3 12 M SHA 70-80 3000 4 13 M Defrost Watts * Dimensions (mm) Motor A B Amps Connections Weight In Out Kg 500 650 900 1200 1750 2300 605 730 930 1180 1630 2080 293 418 618 868 1318 1768 0.62 0.62 0.62 0.64 0.64 0.64 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 10 mm 22 mm 22 mm 28 mm 28 mm 28 mm 9.5 11.5 16.5 20.5 29.5 39.0 500 650 900 1200 1750 2300 605 730 930 1180 1630 2080 293 418 618 868 1318 1768 0.62 0.62 0.62 0.64 0.64 0.64 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 10 mm 22 mm 22 mm 28 mm 28 mm 28 mm 9.0 10.5 15.5 19.0 27.5 36.0 500 650 900 1200 1750 2300 605 730 930 1180 1630 2080 293 418 618 868 1318 1768 0.62 0.62 0.62 0.64 0.64 0.64 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 10 mm 22 mm 22 mm 28 mm 28 mm 28 mm 8.5 10.0 15.0 18.0 26.0 34.0 Standard Conditions: Condition SC 2 SC 3 Air Inlet Temperature 0°C -18°C Evaporating Temperature -8°C -25°C www.fsw.uk.com Standard TD 8K 7K 95 LU-VE F27HC Unit Coolers 4.5 mm Fin Spacing. Code Model High Temperature R300 F27HC 25-4N R301 F27HC 36-4N R302 F27HC 49-4N R303 F27HC 71-4N R304 F27HC107-4N R305 F27HC142-4N Duty - Watts at SC 2 (8KTD) 1332 1739 2812 3515 5328 6956 Electric Defrost R310 F27HC 25-4E R311 F27HC 36-4E R312 F27HC 49-4E R313 F27HC 71-4E R314 F27HC107-4E R315 F27HC142-4E - 6.3 mm Fin Spacing. High Temperature R320 F27HC 19-6N R321 F27HC 28-6N R322 F27HC 38-6N R323 F27HC 55-6N R324 F27HC 85-6N R325 F27HC110-6N at SC 2 (8KTD) 1184 1517 2442 3071 4662 6142 at SC 3 (7KTD) - Electric Defrost R330 F27HC 19-6E R331 F27HC 28-6E R332 F27HC 38-6E R333 F27HC 55-6E R334 F27HC 85-6E R335 F27HC110-6E at SC 2 (8KTD) - at SC 3 (7KTD) 880 1127 1815 2282 3465 4565 7.0 mm Fin Spacing. High Temperature R340 F27HC 16-7N R341 F27HC 23-7N R342 F27HC 31-7N R343 F27HC 46-7N R344 F27HC 70-7N R345 F27HC 92-7N at SC 2 (8KTD) 1036 1332 2146 2664 4107 5476 at SC 3 (7KTD) - Electric Defrost R350 F27HC 16-7E R351 F27HC 23-7E R352 F27HC 31-7E R353 F27HC 46-7E R354 F27HC 70-7E R355 F27HC 92-7E at SC 2 (8KTD) - at SC 3 (7KTD) 770 990 1595 1980 3052 4070 Duty - Watts at SC 3 (7KTD) 990 1292 2090 2612 3960 5170 The above duties will need correcting to the actual temperature difference. The duties indicted have been calculated using R404A. for other refrigerants please Contact us for the relevant correction factor. Please see facing page for application notes. 96 Sales Office: 01543 437 010 LU-VE F27HC Unit Coolers Specification: Air Vol. cu.m/hr Model No of Fans Air Throw Defrost Watts * Dimensions (mm) Motor Wid Hei Amps Connections Weight In Out Kg 1220 1220 2160 2160 3080 4000 678 678 1048 1048 1418 1788 415 415 415 415 415 415 0.6 0.6 1.2 1.2 1.8 2.4 3/8 1/2 1/2 1/2 1/2 1/2 3/8 7/8 7/8 1-1/8 1-1/8 1-1/8 12 13 19 21 28 36 1220 1220 2160 2160 3080 3080 678 678 1048 1048 1418 1788 415 415 415 415 415 415 0.6 0.6 1.2 1.2 1.8 2.4 3/8 1/2 1/2 1/2 1/2 1/2 3/8 7/8 7/8 1-1/8 1-1/8 1-1/8 11 12 18 20 27 34 1220 1220 2160 2160 3080 3080 678 678 1048 1048 1418 1788 415 415 415 415 415 415 0.6 0.6 1.2 1.2 1.8 2.4 3/8 1/2 1/2 1/2 1/2 1/2 3/8 7/8 7/8 1-1/8 1-1/8 1-1/8 10 11 17 19 26 32 4.5mm Fin Spacing (275mm Blades) F27HC 25-4N F27HC 36-4N F27HC 49-4N F27HC 71-4N F27HC107-4N F27HC142-4N 900 900 1800 1800 2750 3600 1 1 2 2 3 4 10.5 M 10.5 M 12.5 M 12.5 M 14.0 M 15.5 M 6.0mm Fin Spacing (275mm Blades) F27HC 19-6N F27HC 28-6N F27HC 38-6N F27HC 55-6N F27HC 85-6N F27HC110-6N 1000 1000 2000 2000 3000 4000 1 1 2 2 3 4 11.0 M 11.0 M 13.0 M 13.0 M 14.5 M 16.0 M 7.0mm Fin Spacing (275mm Blades) F27HC 16-7N F27HC 23-7N F27HC 31-7N F27HC 46-7N F27HC 70-7N F27HC 92-7N 1000 1000 2000 2000 3000 4000 1 1 1 2 2 3 11.5 M 11.5 M 13.5 M 13.5 M 15.5 M 17.0 M Standard Conditions: Condition SC 2 SC 3 Air Inlet Temperature 0°C -18°C Evaporating Temperature -8°C -25°C www.fsw.uk.com Standard TD 8K 7K 97 LU-VE F35HC Unit Coolers 4.5 mm Fin Spacing. Code Model High Temperature R400 F35HC 73-4N R401 F35HC106-4N R402 F35HC133-4N R403 F35HC145-4N R404 F35HC215-4N R405 F35HC272-4N R406 F35HC323-4N R407 F35HC362-4N R408 F35HC430-4N Duty - Watts Duty - Watts at SC 2 (8KTD) at SC 3 (7KTD) 3959 4958 5920 7992 9990 13653 14948 18352 20128 - Electric Defrost R410 R411 R412 R413 R414 R415 R416 R417 R418 F35HC 73-4E F35HC106-4E F35HC133-4E F35HC145-4E F35HC215-4E F35HC272-4E F35HC323-4E F35HC362-4E F35HC430-4E 6.0 mm Fin Spacing. High Temperature R420 F35HC 59-6N R421 F35HC 84-6N R422 F35HC108-6N R423 F35HC117-6N R424 F35HC174-6N R425 F35HC218-6N R426 F35HC261-6N R427 F35HC290-6N R428 F35HC348-6N - - 2942 3685 4400 5940 7425 10147 11110 13640 14960 at SC 2 (8KTD) at SC 3 (7KTD) 3330 4366 5254 6808 8843 11914 13320 15910 17760 - Electric Defrost R430 R431 R432 R433 R434 R435 R436 R437 R438 F35HC 59-6E F35HC 84-6E F35HC108-6E F35HC117-6E F35HC174-6E F35HC218-6E F35HC261-6E F35HC290-6E F35HC348-6E - 2475 3245 3905 5060 6572 8855 9900 11825 13200 The above duties will need correcting to the actual temperature difference. The duties indicted have been calculated using R404A. for other refrigerants please contact us for the relevant correction factor. Please see facing page for application notes. Standard Conditions: Condition SC 2 SC 3 98 Air Inlet Temperature 0°C -18°C Evaporating Temperature -8°C -25°C Standard TD 8K 7K Sales Office: 01543 437 010 LU-VE F35HC Unit Coolers 7.0 mm Fin Spacing. High Temperature R440 F35HC 47-7N R441 F35HC 69-7N R442 F35HC 86-7N R443 F35HC 94-7N R444 F35HC143-7N R445 F35HC179-7N R446 F35HC213-7N R447 F35HC238-7N R448 F35HC284-7N at SC 2 (8KTD) 2886 3848 4662 5883 7881 10471 11840 13320 15762 at SC 3 (7KTD) - Electric Defrost R450 F35HC 47-7E R451 F35HC 69-7E R452 F35HC 86-7E R453 F35HC 94-7E R454 F35HC143-7E R455 F35HC179-7E R456 F35HC213-7E R457 F35HC238-7E R458 F35HC284-7E at SC 2 (8KTD) - at SC 3 (7KTD) 2145 2860 346N 4372 5857 7782 87N0 9900 11715 Model Air Vol. cu.m/hr No of Fans Air Throw Defrost Dimensions (mm) Motor Watts * Wid Hei Amps Connections Liq Suct. Weight Kg 4.5mm Fin Spacing (350mm Blades) F35HC 73-4N F35HC106-4N F35HC145-4N F35HC215-4N F35HC272-4N F35HC323-4N F35HC362-4N F35HC430-4N 2600 2400 5200 4800 7450 7200 9950 9600 1 1 2 2 3 3 4 4 19.5 M 18.0 M 23.0 M 22.0 M 26.0 M 25.0 M 30.0 M 29.0 M 2075 2975 3680 5280 7620 7620 9940 9940 865 865 1420 1420 1975 1975 2530 2530 415 415 415 415 415 415 415 415 0.8 0.8 1.6 1.6 2.4 2.4 3.2 3.2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 27 32 44 51 65 71 86 93 2075 2975 3680 5280 7620 7620 9940 9940 865 865 1420 1420 1975 1975 2530 2530 415 415 415 415 415 415 415 415 0.8 0.8 1.6 1.6 2.4 2.4 3.2 3.2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 26 31 42 49 62 67 82 88 2780 3730 4880 6550 9490 9490 12370 12370 865 865 1420 1420 1975 1975 2530 2530 415 415 415 415 415 415 415 2262 0.8 0.8 1.6 1.6 2.4 2.4 3.2 3.2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 25 30 41 47 60 65 79 85 6.0mm Fin Spacing (350mm Blades) F35HC 59-6N F35HC 84-6N F35HC117-6N F35HC174-6N F35HC218-6N F35HC261-6N F35HC290-6N F35HC348-6N 2650 2500 5300 5000 7700 7500 10300 10000 1 1 2 2 3 3 4 4 20.0 M 18.5 M 23.5 M 22.5 M 26.5 M 25.5 M 30.5 M 29.5 M 7.0mm Fin Spacing (350mm Blades) F35HC 47-7N F35HC 69-7N F35HC 94-7N F35HC143-7N F35HC179-7N F35HC213-7N F35HC238-7N F35HC284-7N 2700 2600 5400 5200 7950 7800 10600 10400 1 1 2 2 3 3 4 4 20.5 M 19.0 M 24.0 M 23.0 M 27.0 M 26.0 M 31.0 M 30.0 M www.fsw.uk.com 99 LU-VE FHD Dual Discharge Coolers - Cold Rooms and Food Prep Area Capacity @ Eurovent SC2 3.0 mm Fin Spacing. Code Model High Temperature R800 FHD 711-3 R801 FHD 712-3 R802 FHD 721-3 R803 FHD 722-3 R804 FHD 732-3 R805 FHD 742-3 Duty - Watts High Fan Speed 2800 3940 5630 7910 11700 14570 Duty - Watts Low Fan Speed 2470 3350 4970 6730 10050 12730 Electric Defrost R810 FHD 711-3 R811 FHD 712-3 R812 FHD 721-3 R813 FHD 722-3 R814 FHD 732-3 R815 FHD 742-3 2800 3940 5630 7910 11700 14570 2470 3350 4970 6730 10050 12730 4.5 mm Fin Spacing. High Temperature R820 FHD 811-4 R821 FHD 812-4 R822 FHD 821-4 R823 FHD 822-4 R824 FHD 832-4 R825 FHD 842-4 2280 3350 4560 6700 10120 12990 2020 2940 4050 5850 8870 11480 Electric Defrost R830 FHD 811-4 R831 FHD 812-4 R832 FHD 821-4 R833 FHD 822-4 R834 FHD 832-4 R835 FHD 842-4 2280 3350 4560 6700 10120 12990 2020 2940 4050 5850 8870 11480 7.0 mm Fin Spacing. High Temperature R840 FHD 911-7 R841 FHD 912-7 R842 FHD 921-7 R843 FHD 922-7 R844 FHD 932-7 R845 FHD 942-7 1620 2540 3240 5040 7760 10230 1470 2240 2940 4490 6880 9130 Electric Defrost R850 FHD 911-7 R851 FHD 912-7 R852 FHD 921-7 R853 FHD 922-7 R854 FHD 932-7 R855 FHD 942-7 1620 2540 3240 5040 7760 10230 1470 2240 2940 4490 6880 9130 For application notes please see facing page. 100 Sales Office: 01543 437 010 LU-VE FHD Dual Discharge Coolers Specification: No of Fans Air Throw 3.0.mm Fin Spacing FHD 711-3 1800 FHD 712-3 1800 FHD 721-3 3600 FHD 722-3 3600 FHD 732-3 5400 FHD 743-3 7200 1 1 2 2 3 4 8-11m 8-11m 10-11m 10-11m 11-14m 11-15m 1800 1800 3200 3200 4700 6200 888 888 1443 1443 1998 2553 596 596 1151 1151 1706 2261 0.7 0.7 1.4 1.4 2.1 2.8 1/2 1/2 1/2 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 23 24 26 39 58 76 4.5mm Fin Spacing FHD 811-4 1800 FHD 812-4 1800 FHD 821-4 3600 FHD 822-4 3600 FHD 832-4 5400 FHD 843-4 7200 1 1 2 2 3 4 9-11m 9-11m 10-13m 10-13m 11-14m 12-15m 1800 1800 3200 3200 4700 6200 888 888 1443 1443 1998 2553 596 596 1151 1151 1706 2261 0.7 0.7 1.4 1.4 2.1 2.8 1/2 1/2 1/2 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 21 23 35 38 53 69 7.0mm Fin Spacing FHD 911-7 1800 FHD 912-7 1800 FHD 921-7 3600 FHD 922-7 3600 FHD 932-7 5400 FHD 943-7 7200 1 1 2 2 3 4 9-12m 9-12m 10-14m 10-14m 12-15m 13-16m 1800 1800 3200 3200 4700 6200 888 888 1443 1443 1998 2553 596 596 1151 1151 1706 2261 0.7 0.7 1.4 1.4 2.1 2.8 1/2 1/2 1/2 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 19 21 32 35 49 62 Model Air Vol. cu.m/hr Defrost Dimensions (mm) Motor Watts * A B Amps www.fsw.uk.com Connections Liq Suct. Weight Kg 101 LU-VE SHDS Dual Discharge Coolers Low air velocity and noise suitable for labs & prep rooms 3.1 mm Fin Spacing. Code Model High Temperature R500 SHDS 52-32 R501 SHDS 74-32 R502 SHDS114-32 R503 SHDS146-32 R504 SHDS221-32 R505 SHDS294-32 R506 SHDS368-32 Duty - Watts at SC 2 (8KTD) 2442 2812 3774 5624 8621 11396 13764 Electric Defrost R510 SHDS 52-32E R511 SHDS 74-32E R512 SHDS114-32E R513 SHDS146-32E R514 SHDS221-32E R515 SHDS294-32E R516 SHDS368-32E - 4.8 mm Fin Spacing. High Temperature R520 SHDS 34-50 R521 SHDS 49-50 R522 SHDS 73-50 R523 SHDS 98-50 R524 SHDS148-50 R525 SHDS196-50 R526 SHDS245-50 at SC 2 (8KTD) 1998 2405 3293 4847 7474 9990 12210 at SC 3 (7KTD) - Electric Defrost R530 SHDS 34-50E R531 SHDS 49-50E R532 SHDS 73-50E R533 SHDS 98-50E R534 SHDS148-50E R535 SHDS196-50E R536 SHDS245-50E at SC 2 (8KTD) - at SC 3 (7KTD) 1485 1788 2448 3603 5555 7425 9075 7.7 mm Fin Spacing. High Temperature R540 SHDS 21-80 R541 SHDS 31-80 R542 SHDS 46-80 R543 SHDS 62-80 R544 SHDS 93-80 R545 SHDS124-80 R546 SHDS155-80 at SC 2 (8KTD) 1443 1813 2516 3663 5698 7696 9620 at SC 3 (7KTD) - Electric Defrost R550 SHDS 21-80E R551 SHDS 31-80E R552 SHDS 46-80E R553 SHDS 62-80E R554 SHDS 93-80E R555 SHDS124-80E R556 SHDS155-80E at SC 2 (8KTD) - at SC 3 (7KTD) 1073 1348 1870 2723 4235 5720 7150 Duty - Watts at SC 3 (7KTD) 2442 2812 3774 5624 8621 11396 13764 For application notes please see facing page. 102 Sales Office: 01543 437 010 LU-VE SHDS Dual Discharge Coolers Specification: Model Air Vol. No of Air Throw Defrost Dimensions (mm) Motor cu.m/hr Fans Metres Watts * A B Amps 3.1mm Fin Spacing (330mm Blades) SHDS 52-32 1150 1 6 SHDS 74-32 1150 1 6 SHDS114-32 1350 1 5 SHDS146-32 2300 2 7 SHDS221-32 3450 3 8 SHDS294-32 4600 4 8.5 SHDS368-32 5750 5 9 4.8mm Fin Spacing (330mm Blades) SHDS 34-50 1300 1 7 SHDS 49-50 1300 1 7 SHDS 73-50 1450 1 5.5 SHDS 98-50 2600 2 8 SHDS148-50 3900 3 9 SHDS196-50 5200 4 9.5 SHDS245-50 6500 5 10 7.7mm Fin Spacing (330mm Blades) SHDS 21-80 1400 1 8 SHDS 31-80 1400 1 8 SHDS 46-80 1500 1 6 SHDS 62-80 2800 2 9 SHDS 93-80 4200 3 10 SHDS124-80 5600 4 10.5 SHDS155-80 7000 5 11 Connections In Out Weight Kg 1300 1300 2000 2400 3540 4760 5800 740 740 1040 1190 1640 2090 2540 485 485 785 935 1385 1835 2285 0.31 0.31 0.31 0.62 0.93 1.24 1.55 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 21.0 22.0 26.0 37.5 53.0 68.5 84.0 1300 1300 2000 2400 3540 4760 5800 740 740 1040 1190 1640 2090 2540 485 485 785 935 1385 1835 2285 0.31 0.31 0.31 0.62 0.93 1.24 1.55 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 21.0 22.0 26.0 37.5 53.0 68.5 84.0 1300 1300 2000 2400 3540 4760 5800 740 740 1040 1190 1640 2090 2540 485 485 785 935 1385 1835 2285 0.31 0.31 0.31 0.62 0.93 1.24 1.55 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 21.0 22.0 26.0 37.5 53.0 68.5 84.0 * Air Throw is side distribution therefore 2 x given figure i.e. SHDS52-32 = 2 x 6M (12M) Standard Conditions: Condition SC 2 SC 3 Air Inlet Temperature 0°C -18°C Evaporating Temperature -8°C -25°C www.fsw.uk.com Standard TD 8K 7K 103 Commercial Cubic Cooler Spares – Production Models Code R910 R911 R912 R913 R920 R921 R922 R923 R924 R925 R926 Description Fan Motor Fan Guard Fan Mounting Brackets Side Panel Coil Heaters Coil Heaters Coil Heaters Coil Heaters Coil Heaters Coil Heaters Heater Clips Type Code W26 A R930 Fan Motor up to Feb02 V350 A S3HC Capacitor is mounted in electrics box R931 Fan Motor from Feb02 V350 B S3HC Capacitor is mounted on the motor R932 R933 R934 R935 R940 R941 R942 R943 R944 R945 R946 R947 R948 R949 R950 R951 R952 R953 R954 R955 R956 R957 Fan Guard Fan Mounting Brackets Fan Motor Capacitor Side Panel Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater Coil Heaters Drain Tray Heater SHC 01 SHC 01 SHC 02 SHC 02 SHC 03 SHC 04 6.3 MFD SHC 11 SHC 11 SHC 15 SHC 12 SHC 12 SHC 13 SHC 13 SHC 14 SHC 14 To Suit S2HC S2HC S2HC S2HC S2HC 25-19-16 S2HC 36-28-23 S2HC 49-38-31 S2HC 71-55-46 S2HC 107-85-70 S2HC 142-110-92 S2HC S3HC S3HC S3HC S3HC S3HC 73-59-47 S3HC 73-59-47 S3HC 106-84-69 S3HC 106-84-69 S3HC 133-108-86 S3HC 133-108-86 S3HC 145-117-94 S3HC 145-117-94 S3HC 215-174-143 S3HC 215-174-143 S3HC 272-218-179 S3HC 272-218-179 S3HC 323-261-213 S3HC 323-261-213 S3HC 362-290-238 S3HC 362-290-238 S3HC 430-348-284 S3HC 430-348-284 Commercial Panel Cooler Spares – Production Models Code R959 R960 R961 R962 R965 R966 R967 R968 R969 R970 R971 104 Description Heater Clips Fan Motor Fan Guard Fan Guard Coil Heaters Coil Heaters Coil Heaters Coil Heaters Coil Heaters Coil Heaters Inspection Cover Type Code W26 KIT DE12 KIT DE 6 KIT DE13 KIT DE 8 KIT DE 9 KIT DE10 To Suit SHA SHA SHA SHA 60-32/ 41-50/ 28-80 SHA 30-41-14 SHA 40-27-17 SHA 60-41-28 SHA 80-53-35 SHA 120-79-52 SHA 160-106-70 SHA Sales Office: 01543 437 010 Commercial Panel Cooler Spares – Production Models Code R973 R974 R975 R976 R978 R979 R980 R981 R982 R983 R984 R985 R986 Description Coil Heaters Coil Heaters Fan Motor Fan Motor Coil Heaters Coil Heaters Coil Heaters Coil Heaters Fan Guard Heater Clips Inspection Cover Coil Heaters Coil Heaters Type Code RCE 051 RCE 061 W5/2 W4 RCE 021 RCE 022 RCE 023 Kit RCE 024 RAB 13 RAB 14 To Suit SHP SHP 11/19 SHP SHP 11/19 SHS 8 & 12 SHS 13 & 15 SHS 18 & 22 SHS 26 & 32 SHS SHS 26 & 32 SHS SHF 50S/55D SHF 60S/65D/70D Type Code V 330 / A V 330 4P V 330 6P W 26 W 26 W8 W5/2 To Suit HC & NHC HDN HDS HA HA49-1:36-2:26-5 HS HP Out of Production Models Code R987 R988 R989 R990 R991 R992 R993 Description Fan Motor Fan Motor Fan Motor Fan Motor Fan Motor Fan Motor Fan Motor www.fsw.uk.com 105
Similar documents
Auto Starter
Size A 74.00, Size B 21.00, No./mount. holes 2,
No./mount. holes with thread 2, No./teeth 9, No./teeth
(fits into) 9, rotation CW
For: TOYOTA
GEA Searle
give added protection in polluted or saline atmospheres: Cu/Av- Copper tube / vinyl coated aluminium fins
Cu/Cu - Copper tubes / copper fins
Cu/Et - Copper tubes / electro tinned copper fins
Cu/A...
Manual T8h_uPT - Trikke Europe
?A&`)\!C&)Z&RF`&)[\c>&&YCI&)a&_[c&b_!!IZ2IC&)!GIZ&!G_[&!GI&\2d2)[&b_!!IZc&CY((\2I]&O2!G&
!GI&Y(!&)Z&!GI&()Z!_&()OIZ&QG_Z^IZ&(Z)`2]I]&._c&ZICY\!&2[&CcC!I.&a_2\YZI>&&_[c&CYQG&
.)]2a2Q_!2)[C&O2\\&`)2]...