Mud Runner 117-118

BACK TO CONTENTS <<
POWER ASSISTED INTERNAL FINISHER
No Leads, No Hoses, No Effort!
MADE IN USA
• Holds 50% more compound than
a standard Corner BOX
• REDUCED USER FATIGUE
• USES THICKER COMPOUND FOR
SUPERIOR FINISH
Operational Videos
• ONE SWEEP FINISH - NO REVERSE PASS
OR PATCHING UP REQUIRED
SPARE PARTS
Exclusive distributor for Australia & New Zealand
Intex . . . building excellence. Freecall 1300 107 108
intex.com.au
&
SERVICE
AVAILABLE
Automatic taping &
finishing systems
B UI L DI NG E XC E L L E NC E
BACK TO CONTENTS <<
PRODUCT CODE
pack
qty.
DESCRIPTION
MUDRUNNER
TX766
TapeTech Mudrunner Internal Finisher
1
TX775
TapeTech Extension Handle
1
Corner Box & handles
Used with Corner Finisher to apply finishing coat to both sides of 90° internal corner. Comes complete
with strong yet lightweight fibreglass 1200mm handle. Has quick release latch at rear for easy cleaning
and handle is angled for improved leverage and reduced user fatigue. X Tender handle telescopes from
1500-2400mm with easy twist lock for locking at intermediate lengths. Both handles have a comfortable rubber
grip.
TX702
TapeTech Corner Box with Handle
1
TX761
TapeTech Corner Box X Tender Handle 1500-2400mm
1
Corner Finishers
Distributes joint compound evenly in corners and smoothly feathers both sides in one pass. Spring loaded
action flexes for corners slightly over or under 90°. Clicks onto Corner Finisher Handle to wipe down
excess compound after tape is rolled into corner. 75 or 90mm Finisher clicks onto Corner Box, Mud Runner
or Compound Tube to apply second coat.
TPC55
positive spring
loaded lock
TapeTech Corner Finisher (Angle Head ) 55mm
1
TPC75
TapeTech Corner Finisher (Angle Head ) 75mm
1
TPC90
TapeTech Corner Finisher (Angle Head ) 90mm
1
“Easy Roll” adjustable angle head has adjustable blade tension. Unique rubberized wheels allow for
movement with less effort when used with TCT16 compound tube or TX702 corner box.
TX748
TX748
TapeTech "Easy Roll" Corner Finisher (Angle Head) 75mm
1
Corner Finisher handles
Lightweight handles for any Corner Finisher. Xtender handle telescopes from 1500-2400mm with easy
twist lock for locking at intermediate lengths. Both handles are strong yet lightweight fibreglass
with comfortable grip.
TX710
TapeTech Corner Finisher Handle 1200mm
1
TX763
TapeTech Corner Finisher Xtender Handle 1500-2400mm
1
COMPOUND HEADS
Used to apply joint compound to internal & external corners. Particularly useful for installing the NoCoat
structural corner system. Clicks onto the standard corner box, Mudrunner or Compound Tube and applies
a consistent wide ribbon of joint compound to each side of the corner.
TCH38
TX769
TCH38
Compound Head 90º Internal
1
TCH77
Compound Head 135º Internal
1
TX769
Compound Head 90º External
1
TX779
Compound Head for External Obtuse
1
TX789
Compound Head for Bullnose
1
TX799
Compound Head for L-Trim
1
automatic taping & finishing systems
118