brush cutter - Honda Power Products Indonesia

Transcription

brush cutter - Honda Power Products Indonesia
BRUSH CUTTER
UMK435T
2
18VK9602
© Honda Motor Co., Ltd. 2005
FOREWORD INDEX
1
ENGINE GROUP
2
FRAME GROUP
3
PART NUMBER INDEX
4
PART NAME INDEX
5
UMK435T
B1
CONTENTS
Instruction for use of parts catalogue
Page
• This parts catalogue was prepared based on the latest information available as of November 17, 2005.
• See the parts catalogue news for any revision that is made after
November 17, 2005.
• Always specify the part number when ordering a part.
• Check the model, type, serial numbers, color, maker, and the
size as needed before ordering a part.
• Note that the illustrations (part drawings) can differ from the actual parts in shape.
They are given just to help you to refer to the parts.
• When modifications or additions to this parts catalogue are
made, a revised edition will be issued at an appropriate time,
with successively progressing revision numbers on the cover. We recommend obtaining such revisions in order to keep
your parts catalogue up-to-date at all times. To check whether
a parts catalogue revision has been issued, please contact
your Honda distributor.
Initial version issue date
Address
No.
• Instruction for use of parts catalogue ......................... 1
• How to refer to the part information ............................ 2
• Part catalogue structure ............................................. 3
• When the parts were revised...................................... 4
• Abbreviations used in the parts catalogue.................. 4
• How to check the part block and serial numbers........ 5
• Models, parts catalogue codes and applicable
B
B
B
B
B
B
1
2
3
4
4
5
serial numbers ........................................................... 6
B 6
B 6
hose........................................................................... 7
B 7
B 8
B13
C 1
D 1
E 1
F 1
• Features of each type................................................. 6
• Fuel hose, general purpose hoses and vinyl
• FLAT RATE SERVICE TIME...................................... 8
• Illustrated index ........................................................ 13
• ENGINE GROUP..................................................... 16
• FRAME GROUP...................................................... 31
• PART NO. INDEX..................................................... 39
• PART NAME INDEX................................................. 41
1
1
2
3
4
5
August 10, 2005
Honda Motor Co., Ltd.
1
2005.11.17
E
B 2
How to refer to the part information
Reference with “Illustrated index”
1
Reference with “Part number index”
Reference with “Part name index”
2
2005.11.17
E
B 3
Address number
Part catalogue structure
• Address No. is provided (in place of the page No.) to help
you refer to the part with the part No. or part name.
1
Block title
Block number
Service item/Flat rate time
Reference number
• Title number marked with the parenthesis or parentheses
indicates that it continues from the previous page.
Part number
Description
Assemblies
Honda color code
• Sections framed with broken lines in the exploded view
drawings are available as complete assemblies. (Their individual parts can also be obtained.)
Color description
Note
• Notes are shown with the parentheses in the part name
column.
Required quantity
• Required QTY shown in the parenthesis or parentheses
indicates the optional part.
• Required QTY marked with “N” Indicates the optional part
that should be selected as needed.
• Required QTY indicates the number of the part used in the block.
Serial number
Type
• When the type column is blank, it indicates that the part is
applicable to all types.
• As the type of the actual unit may differ from the “parts catalogue, type” please refer to “Models, types and applicable serial numbers” for confirmation.
• Parts enclosed within a dotted line
different block.
are covered in a
• A hollow arrow
indicates the block No. for the parts enclosed within a dotted line
.
• A solid arrow
indicates the block No. the part in
question is connected to.
3
2005.11.17
E
B 4
When the parts were revised
1
Abbreviations used in the parts catalogue
• The following abbreviations are used in the parts name column.
Be sure to check the
serial number!!
The number has been When shown at the left side, When shown at the right side,
used from the initial model it is applicable to the models it is applicable to the models
without revision.
o f N o . 1 0 0 1 8 0 1 a n d t h e up to No.1001800.
subsequent numbers.
A ........... Ampere
A.C. ....... Alternating current
ASSY. .... Assembly
AT. ......... Automatic
transmission
C.D.I. ..... Capacitive discharge
ignition
COMP. ... Complete
D.C. ....... Direct current
EX. ........ Exhaust
G.F.C.I ... Ground fault circuit
interruptor
HEX. ..... Hexagonal
H.S.T. .... Hydrostatic
transmission
• The parts listed with "###" at the end of the parts name have limited supply period
(parts not for sale).
4
2005.11.17
E
FR. .........Front
IN. ..........Inlet
L (100L) .Link (100 Links)
L. ............Left
MM .........Millimeter
MT. .........Manual Transmission
P.T.O. .....Power take off
R. ...........Right
RR. .........Rear
STD. .......Standard
T (22T) ...Tooth (22 Teeth)
V ............Volt
W ...........Watt
B 5
How to check the part block and serial numbers
Part block
Engine parts
Carburetor
parts
Frame parts
E-2~
E-14
F-1~
1
DVK9-B
Numbers
needed
Stamped
engine
number
Stamped
carburetor
identification
number
Stamped
frame
number
CARBURETOR IDENTIFICATION
NUMBER
Check
point
FRAME SERIAL NUMBER
TYPE
ENGINE SERIAL NUMBER
DVK9-A
DVK9-C
5
2005.11.17
E
B 6
Models, parts catalogue codes and applicable serial numbers
1
• Models, parts catalogue codes and applicable serial Nos. given in this parts catalogue can be identified as follows.
Model
Parts
catalogue
type
Model
UMST
UMST
GX35T
GY7
UMT
UMT
GX35
GY5
UMTT
UMTT
GX35T
GY7
Type
UMK435T
Applicable
engine
serial No.
Engine
Type
U2ST
U2ST
U2T
U2T
GX35
GY5
U2TT
U2TT
GX35T
GY7
Applicable
frame
serial No.
GCAMT1000001~
GCACM1100001~
HAAT1000001~
GCAMT1000001~
GCACM1100001~
GCAMT1000001~
* Of carburetor identification numbers, only the portions underlined in the example below are used for registration.
WYB 14B
Features of each type
• See the following table for the features of each type. (Items in brackets are optional)
Model
Specifications
Cutter Blade
Type
UMK435T
UMST
UMT
UMTT
2-Blade cutter
Mowing cutter
y
y
Applicable
carburetor
identification No.
y
U2ST
U2T
U2TT
y
y
y
6
2005.11.17
E
WYB 14B
B 7
Fuel hose, general purpose hoses and vinyl hose
• The standard part fuel hose, general purpose hose and vinyl hose may be substituted by the coiled bulk part.
• When ordering the standard part fuel hose, general purpose hose and vinyl hose use the bulk part number written in the parts catalog in brackets (
• When exchanging the hose, cut and use at the specified length as mentioned in the part name.
(For the method of cutting the bulk part, and method of filling out orders etc., please refer to the instructions issued with the bulk part.)
1
) underneath the part name.
Bulk part number of fuel hose, general purpose hose and vinyl hose.
Example: 9 5 0 0 1 - 7 5 0 0 1 - 5 0 M
Bulk part number:
Refers to the bulk part.
Marking code (fuel hose and general purpose hose)
Change code (Vinyl hose)
Indicates number mark or change sequence, however, the code for the bulk part must be strictly 0 (zero).
Types of code:
• Fuel hose
2: Red outside braid
(3 mm inside dia. only)
5: Black inside braid
3: Red (3 mm inside dia. only)
4: Ash gray with red stripe
(3 mm inside dia. only)
6: Black
• General hose
1: Ash gray
2: Ash gray
3: Black
5: Black
• Vinyl hose
1: Clear
2: Black
3: Light red
6: Light red
7: Pale black
Lengths:
001: 1 m (standard)
003: 3 m
008: 8 m Application or specification of some parts is not settled.
}
I.D code: (fuel hose and general purpose hose)
30: 3.0 mm
50: 5.0 mm
35: 3.5 mm
55: 5.3 mm, 5.5 mm
45: 4.5 mm
65: 6.5 mm
70: 7.0 mm
75: 7.3 mm, 7.5 mm
80: 8.0 mm
11: 11 mm
91: 12 (outside dia. 15) mm
92: 12 (outside dia. 16) mm
12: 12 (outside dia. 17) mm
14: 14 mm
17: 17 mm
21: ID. 8.0, OD. 9.0 mm
23: ID. 8.0, OD. 12.0 mm
25: ID. 9.0, OD. 11.0 mm
27: ID. 9.0, OD. 13.0 mm
33: ID. 10.0, OD. 14.0 mm
36: ID. 11.0, OD. 13.0 mm
37: ID. 11.0, OD. 15.0 mm
38: ID. 12.0, OD. 13.0 mm
39: ID. 12.0, OD. 14.0 mm
40: ID. 12.0, OD. 16.0 mm
43: ID. 13.0, OD. 15.0 mm
45: ID. 14.0, OD. 18.0 mm
50: ID. 16.0, OD. 19.0 mm
55: ID. 17.5, OD. 20.5 mm
60: ID. 22.0, OD. 27.0 mm
ID./OD. code: (vinyl hose)
01: ID.
03: ID.
05: ID.
07: ID.
08: ID.
09: ID.
2.9, OD.
3.0, OD.
3.5, OD.
4.0, OD.
4.5, OD.
4.5, OD.
6.8 mm
6.0 mm
6.5 mm
7.0 mm
6.5 mm
8.0 mm
12: ID.
10: ID.
11: ID.
14: ID.
17: ID.
19: ID.
5.0, OD. 7.0 mm
5.0, OD. 8.0 mm
5.0, OD. 9.0 mm
6.0, OD. 9.0 mm
7.0, OD. 9.0 mm
7.0, OD. 11.0 mm
Hose type:
1: Fuel hose
3: Vinyl hose
5: General hose
CAUTION: It is DANGEROUS to confuse the fuel hose with the general purpose hose or vinyl hose.
Never use a general purpose hose or vinyl hose in place of a fuel hose or vice versa. Always use the correct bulk part in the parts catalogue, according
to the service manual or the instructions issued with the bulk part.
7
2005.11.17
E
B 8
Editorial style
FLAT RATE SERVICE TIME
1
Flat rate service time (FRT) means the standard time required to
service a product, which is listed in this manual to help the dealers
control the actual working process and calculate the service charge
by using it as a guide.
The service items shown in the text are listed with the exchange
work time for the repair sales parts as the subject. Other
representative service items not using repair parts (removal/
installation, adjustment, inspection/measuring, and other work) are
listed collectively in the list in the preface, classified according to the
work.
FRT setting system
FRT setting standard
Net service time
Removal, Disassembly/reassembly, Installation
Inspection, Measurement, Adjustment, Confirmation
Diagnosis/troubleshooting (Electric system)
• Decimal system (in unit of 0.1) is adopted to set FRT as it is
convenient to calculate the wage.
Example: (0.1) 6 minutes, (0.2) 12 minutes
[Labor cost per hour] x [FRT] = [Wage]
• FRT is set with a hand tool.
• Service items and FRT can be subject to change depending on
development of tools and service equipment and improvement in
service procedure.
Completion inspection
Float time
Preparation
(Process check, Confirmation arrangement for
necessary tools)
Related work (Transfer of products)
* Float time is set by multiplying the net service time by a given
coefficient.
8
2005.11.17
E
B 9
Work procedure
Service item whose FRT is not presented
• As the work procedure is set with the work time according to the
method in the separate Service Manual, refer to this Manual as
required.
• Accessories and service parts that are not listed to use in this
manual.
• Work methods permitting servicing in the shortest time still
permitting assurance of safe work and product warranty are used
for the setting of service items not listed in the Service Manual.
• Work basically is to be performed by one person, and when two or
more people are required, setting is done as the total time for the
number of people.
• The set value for the technological level of the workers uses a
person with three years of experience in the repair of Honda
products as the standard.
• Special tools and service equipment used to set FRT are those
specified or recommended in Service Manual.
1
• Locations with little aging deterioration or breakage during normal
use.
• Service work that can be finished by one touch.
• Service work that is seldom done (i.e. extremely small causes of
trouble and service frequency).
• Products and parts whose location for installation differs according
to its status of use and application.
* When FRT is not presented, please calculate wages based on appropriate actual work time.
Operation not included of FRT
• Oil and coolant water drainig, Waiting time for warming up
operation and etc..
• Additional operation that involves removal/installation of standard
exterior equipment.
• Indirect time spent for service by visiting the customer, trade-in,
and delivery.
• Indirect time required for ordering and delivery of parts.
• Cost for grease, adhesive agent, etc. used for service work.
9
2005.11.17
E
B10
Explanation of FRT by using an example
(The example may differ from the actual presented items)
Ref.
1
No.
L.O.N.
(Relative ref. Number)
Description
F.R.T.
(1, 3, 4, 7)
2
1111L1
VALVE, INTAKE • • • • • • • • • • • • • 4.1
Indicating work condition or application condition of the
service item.
Indicating work contents that are included in the service
item.
Indicating a reference No. whose operation and time are
the same as FRT4.1 for the intake valve.
• NOTE: OHV type
• Includes: Engine removal and installation
1111L1A
One head (intake all) add
• • • • • • • • • • • • • • • • • • • • • • • • • 1.4
Reference No. of the illustration of part that shows location
of the replacement work.
(The application range is limited to the service items
without an LON setting within a same block.)
How to refer to the service item by using the sample
(intake valve replacement)
Open to the page of the block where the intake valve’s
spare part illustration is shown.
FRT is an abbreviation of Flat Rate Time indicating the
standard service time required for the replacement.
LON is an abbreviation of Labor Operation Number, and it
is a classification of the service items by the work unit code.
The same operation
models.
Look for the intake valve illustration, and refer to the service item and FRT that agree with the reference No.
code is used regardless of the
Standard operation is indicated with 6 digits code, and
additional operation is indicated with 7 digits code.
Indicating the intake valve replacement and FRT4.1.
Indicating FRT1.4 that will be added when additional
operation (whole intake side of one cylinder head) is done
in association with intake valve replacement.
10
2005.11.17
E
B11
Indication mark for the listing of service items that continues to
the following page
Ref.
L.O.N.
No.
2
1111L1
(Relative ref. Number)
1
•
•
Code
•
•
•
1
Engine
2
Power drive
3
Fuel & Exhaust
4
Frame & Body
5
Steering
6
Electrical
7
Axle & Brake
8
Control system
9
-
0
Attachments
Indication of the block with no setting of FRT
L.O.N.
(Relative ref. Number)
F.R.T.
Description
NO INFORMATION • • • • • • • • • • • • • • • • • • •
• LON code system
1
11
1
L1
A
a
b
c
d
e
A
1
c
•
Mark indicated at the last line.
No.
L1
a) Category codes and classification
VALVE, INTAKE • • • • • • • • • • • • 4.1
+
Ref.
1
a
F.R.T.
Description
11
Category
c) Operation codes and classification
Code
a) Category code..................... Engine
b) Location/function code ........ Engine upper
c) Operation code.................... Replace
d) Operation sequence number (Unit code can be shown
with alphabet)
......................... Intake valve
(No regular rule of code)
e) Additional code ................... One head (intake all)
(No regular rule of code)
Operation category
1
Replace, Removal/Installation, Change
2
Overhaul
3
Adjust, Rotation
4
(Paint-related work: Top-coat)
5
Test, Inspect/diagnose, Measurment
6
(Overhaul-related work: Rebore)
7
(Overhaul-related work: Reseal)
8
(Resurface)
9
(Paint-related work: Refinish)
0
Repair, Cleaning, Air bleeding
11
2005.11.17
E
B12
Major service items without using spare parts
(1) Removal/Installation, (2) Adjustment,
Measurement, (4) Overhaul, (5) Other work
1
(3)
Inspection/
E: Engine, T: Transmission, D: Drive system, B: Body and related
parts
(1) Removal/Installation
Set with the parts configuration in the status of being removed from
the product.
LON
E
1001A2
DESCRIPTION
ENGINE-REMOVAL/INSTALLATION
FRT
0.2
(4) Overhaul
Work condition: The required Measurements, inspections,
adjustments, and cleaning/washing of each part are performed,
including the main body removal/installation work and the
replacement of defective parts.
LON
(2) Adjustment
LON
E
E
DESCRIPTION
3112A0
FRT
1113A1
VALVE CLEARANCE-ADJUSTMENT
NOTE: For 1 product
0.4
3113A2
CARBURETOR IDLE-ADJUSTMENT
0.2
8113B1
THROTTLE CABLE-ADJUSTMENT
0.1
E
B
DESCRIPTION
LON
E
1101E1
FRT
1105A0
ENGINE OIL-INSPECTION
0.1
3100A0
FUEL FILTER-CLEANING
0.3
3120A0
0.1
6140A0
AIR CLEANER-CLEANING
INCLUDES: Air cleaner-inspection
SPARK PLUG-ADJUSTMENT/CLEANING
NOTE: For 1 product
2165A0
BLADE CUTTER-INSPECTION
0.1
0.1
12
2005.11.17
FRT
0.4
(5) Other work
(3) Inspection, Measurement, Cleaning
LON
DESCRIPTION
CARBURETOR-OVERHAUL
INCLUDES: All necessary adjustment
E
DESCRIPTION
ENGINE OIL-CHANGE
INCLUDES: Engine oil-inspection
FRT
0.1
ENGINE GROUP
E-2
C 1
E-7
CRANKCASE SET
B13
C 3
E-10
CRANKSHAFT/PISTON
C 4
CAM PULLEY
2
E-11
C 6
E-12
RECOIL STARTER
E-15
C10
AIR CLEANER
C 7
E-14
FAN COVER/CLUTCH
E-16
C11
MUFFLER
C 8
CARBURETOR
E-17
C12
FUEL TANK
13
2005.11.17
E
B14
ENGINE GROUP
E-19
C13
FLYWHEEL
E-27
C14
TOP COVER
C15
LABEL
2
14
2005.11.17
E-28
E
FRAME GROUP
F-1
D 1
F-2
HANDLE PIPE/THROTTLE LEVER
F-4
B15
D 2
F-3
GEAR CASE
D 4
F-4-1
BLADE(UMST,UMT,UMTT)
D 3
FRAME
D 5
BLADE(U2ST,U2T,U2TT)
F-28
D 6
LABEL
3
F-29
D 7
TOOL
F-40
D 8
SHOULDER BELT
15
2005.11.17
E
E-2
C 1
CRANKCASE SET
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 1101B7 CRANKCASE ••••••••••••••••••••
.INCLUDES: Engine removal and
installation
2
(3)
1111D5 COVER, CYLINDER HEAD AND/OR
PACKING, HEAD COVER •••••••••
6 1111A2 ARM, ROCKER :INTAKE ••••••••••
.INCLUDES: Valve clearance
adjustment
7 1111A1 ARM, ROCKER :EXHAUST •••••••••
.INCLUDES: Valve clearance
adjustment
8 1111L9 LIFTER, VALVE :INTAKE ••••••••
.INCLUDES: Valve clearance
adjustment
9 1111M0 LIFTER, VALVE :EXHAUST •••••••
.INCLUDES: Valve clearance
adjustment
10 1171A4 TUBE, OIL ••••••••••••••••••••
11
(12,29)
1171A2 PLATE, OIL OUTLET VALVE ••••••
.INCLUDES: Engine removal and
installation
16 1111K5 TUBE, BREATHER •••••••••••••••
+17 6141C1 PLUG, SPARK ••••••••••••••••••
2
Ref.
No.
Reqd. QTY
Part No.
Description
UMK
435T
1 10100-Z0Z-405
10100-Z3F-405
CRANKCASE SET •••••••••••••••
••••••••••••••••••••••••••••
2
3
4
5
12310-Z0Z-000
12312-Z0Z-300
12314-Z0H-300
12367-Z0H-000
COVER, CYLINDER HEAD ••••••••
SEAL, HEAD COVER ••••••••••••
GROMMET, HEAD COVER •••••••••
FILTER, BREATHER ••••••••••••
1
1
1
1
1
1
1
6
7
8
9
10
14431-Z0H-003
14441-Z0H-003
14730-Z0Z-000
14740-Z0Z-000
15422-Z0Z-000
ARM, IN. VALVE ROCKER •••••••
ARM, EX. VALVE ROCKER •••••••
LIFTER COMP., IN. VALVE •••••
LIFTER COMP., EX. VALVE •••••
TUBE, OIL •••••••••••••••••••
1
1
1
1
1
11 15510-Z0H-000
12 15571-ZM3-003
14 15600-ZM3-003
15600-Z3F-000
15 15625-ZE1-003
15625-Z0T-800
PLATE ASSY., OIL OUTLET VALVE
VALVE, OIL OUTLET •••••••••••
CAP ASSY., OIL FILLER •••••••
••••••••••••••••••••••••••••
PACKING, OIL FILLER CAP •••••
••••••••••••••••••••••••••••
1
1
1
1
1
1
16 15721-Z0Z-000
17 31914-Z0H-003
31915-Z0H-003
31916-Z0H-003
18 90009-Z0H-003
19 90010-Z0Z-003
20 90013-Z0H-004
TUBE, BREATHER ••••••••••••••
PLUG, SPARK (CMR4H)(NGK) ••••
PLUG, SPARK (CMR5H)(NGK) ••••
PLUG, SPARK (CMR6H)(NGK) ••••
BOLT, SOCKET, 5X20 ••••••••••
BOLT, SOCKET, 5X32 ••••••••••
SCREW, PAN, 4X8 •••••••••••••
1
(1)
1
(1)
2
4
2
Serial No.
Parts catalogue code
-------- 1183074 UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
1183075 -------- UMT,U2T
-------------------------------------------
-------- UMT,U2T
-------- UMT,U2T
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
16
2005.11.17
E
F.R.T.
1.7
0.1
0.6
0.6
0.6
0.6
0.4
1.3
0.1
0.1
E-2
C 2
CRANKCASE SET
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
+17
F.R.T.
.INCLUDES: Spark plug check
2
Reqd. QTY
Ref.
No.
Part No.
Description
21
22
23
24
25
90013-Z0Z-003
90017-Z0H-000
90019-Z0H-003
90206-ZM3-000
93500-03005-0A
SCREW, PAN, 4X8 •••••••••••••
SCREW, TAPPET ADJUSTING •••••
BOLT, SOCKET, 5X12 ••••••••••
NUT, TAPPET ADJUSTING •••••••
SCREW, PAN, 3X5 •••••••••••••
2
2
2
2
1
-------- -------- UMT,U2T
26
27
28
29
94305-40102
95002-41200-08
95002-41300-04
15510-Z3E-000
PIN, SPRING, 4X10 •••••••••••
CLAMP, TUBE (D12) •••••••••••
CLAMP, TUBE (D13) •••••••••••
PLATE ASSY., OIL OUTLET VALVE
1
1
1
1
-------- -------- UMST,UMTT,U2ST,U2TT
UMK
435T
Serial No.
Parts catalogue code
17
2005.11.17
E
E-7
C 3
CRANKSHAFT/PISTON
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1
(2,3)
1111J4 RING SET, PISTON •••••••••••••
.INCLUDES: Engine removal and
installation
1111J4F .Replace 1 piston and/or pin
and/or rod, connecting and/or
bearing add •••••••••••••••••
4 1101F0 CRANKSHAFT •••••••••••••••••••
.INCLUDES: Engine removal and
installation
5 1101E5 OIL SEAL, CRANKSHAFT :REAR •••
.INCLUDES: Engine removal and
installation
6 1101E4 OIL SEAL, CRANKSHAFT :FRONT ••
.INCLUDES: Engine removal and
installation
2
Ref.
No.
Reqd. QTY
Serial No.
Part No.
Description
13010-ZM5-000
13101-Z0Z-000
13111-ZM5-000
13310-Z0Z-000
91212-Z0H-003
91212-Z3E-000
RING SET, PISTON ••••••••••••
PISTON ••••••••••••••••••••••
PIN, PISTON •••••••••••••••••
CRANKSHAFT COMP. ••••••••••••
OIL SEAL, 10X20X5 •••••••••••
••••••••••••••••••••••••••••
1
1
1
1
1
1
-------- -------- UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
6 91214-ZM3-003
91214-Z3F-000
OIL SEAL, 15X25X6 •••••••••••
••••••••••••••••••••••••••••
1
1
-------- -------- UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
1
2
3
4
5
UMK
435T
Parts catalogue code
18
2005.11.17
E
F.R.T.
1.5
0.1
1.5
1.4
1.4
E-10
C 4
CAM PULLEY
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 1111K2 SEAL, INTAKE VALVE STEM ••••••
.INCLUDES: Engine removal and
installation
.INCLUDES: Valve clearance
adjustment
3 1111N5 PULLEY, CAMSHAFT •••••••••••••
.INCLUDES: Engine removal and
installation
4 1111N6 BELT, TIMING •••••••••••••••••
.INCLUDES: Engine removal and
installation
5 1111L1 VALVE, INTAKE ••••••••••••••••
.INCLUDES: Engine removal and
installation
.INCLUDES: Valve clearance
adjustment and reface
1111L1E .Replace intake and exhaust
all add •••••••••••••••••••••
6 1111L0 VALVE, EXHAUST •••••••••••••••
.INCLUDES: Engine removal and
installation
.INCLUDES: Valve clearance
adjustment and reface
1111L0E .Replace intake and exhaust
all add •••••••••••••••••••••
Ref.
No.
F.R.T.
1.5
0.6
1.4
1.5
2
0.1
1.5
0.1
Reqd. QTY
Part No.
Description
1 12209-Z0H-003
12209-Z3E-000
SEAL, VALVE STEM ••••••••••••
••••••••••••••••••••••••••••
2
3
4
5
14126-Z0Z-003
14320-Z0Z-000
14400-Z0Z-003
14711-Z0Z-000
14711-Z0Z-800
ROLLER, 4X31.8 ••••••••••••••
PULLEY COMP., CAMSHAFT ••••••
BELT, TIMING (76ZU7 G-300) ••
VALVE, IN. ••••••••••••••••••
••••••••••••••••••••••••••••
6 14721-Z0Z-000
14721-Z0Z-800
VALVE, EX. ••••••••••••••••••
••••••••••••••••••••••••••••
7 14751-Z0Z-000
8 14771-Z0H-000
SPRING, VALVE •••••••••••••••
RETAINER, VALVE SPRING ••••••
UMK
435T
1
1
1
1
1
1
1
1
1
1
1
1
2
2
Serial No.
Parts catalogue code
-------- 1183074 UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
1183075 -------- UMT,U2T
-------- 1183074 UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
1183075 -------- UMT,U2T
-------- 1183074 UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
1183075 -------- UMT,U2T
19
2005.11.17
E
E-10
C 5
CAM PULLEY
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
7 1111P3 SPRING, VALVE :INTAKE ••••••••
.INCLUDES: Valve clearance
adjustment
.INCLUDES: Engine removal and
installation
1111P3A .Replace intake and exhaust
all add •••••••••••••••••••••
1111P4 SPRING, VALVE :EXHAUST •••••••
.INCLUDES: Valve clearance
adjustment
.INCLUDES: Engine removal and
installation
1111P4A .Replace intake and exhaust
all add •••••••••••••••••••••
2
20
2005.11.17
E
F.R.T.
1.5
0.1
1.5
0.1
E-11
C 6
RECOIL STARTER
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1
3
5
6
1121B9
1121B1
1121B7
1121A9
STARTER, RECOIL ••••••••••••••
REEL, RECOIL STARTER •••••••••
SPRING, RECOIL STARTER RETURN
PULLEY, RECOIL STARTER •••••••
.INCLUDES: Engine removal and
installation
9 1121B3 ROPE, RECOIL STARTER •••••••••
F.R.T.
0.2
0.3
0.3
0.5
0.3
2
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
28400-Z0Z-003
28414-Z0Z-000
28421-ZM3-003
28433-ZM3-003
28442-ZM3-003
STARTER ASSY., RECOIL •••••••
CASE, RECOIL STARTER ••••••••
REEL, RECOIL STARTER ••••••••
GUIDE, ROPE •••••••••••••••••
SPRING, RECOIL STARTER ••••••
1
1
1
1
1
6
7
8
9
10
28451-Z0H-003
28459-Z0H-003
28461-ZM3-003
28462-ZM3-003
90012-ZM3-003
PULLEY, RECOIL STARTER ••••••
ARM, SWING ••••••••••••••••••
KNOB, RECOIL STARTER ••••••••
ROPE, RECOIL STARTER ••••••••
SCREW, SETTING ••••••••••••••
1
1
1
1
1
11 90018-Z0H-003
12 91504-ZM3-003
13 91506-ZM3-000
BOLT, SOCKET, 5X16 ••••••••••
COLLAR ••••••••••••••••••••••
COLLAR A, HEAD COVER ••••••••
3
1
3
UMK
435T
Serial No.
Parts catalogue code
21
2005.11.17
E
E-12
C 7
FAN COVER/CLUTCH
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 1141G8 COVER, ENGINE COOLING FAN ••••
.INCLUDES: Engine removal and
installation
2 2121F7 CLUTCH, CENTRIFUGAL ••••••••••
.INCLUDES: Engine removal and
installation
2
Ref.
No.
Reqd. QTY
Part No.
Description
UMK
435T
1 19611-Z0Z-000
2 22000-Z0Z-003
3 22253-Z0Z-003
22253-Z3F-000
4 22254-ZM5-003
22254-Z3F-000
5 22254-Z0Z-003
22255-Z3F-000
COVER, FAN ••••••••••••••••••
CLUTCH ASSY. ••••••••••••••••
BOLT, CLUTCH (8MM) ••••••••••
••••••••••••••••••••••••••••
WASHER, CLUTCH (8X17) •••••••
••••••••••••••••••••••••••••
WASHER, WAVE (10MM) •••••••••
••••••••••••••••••••••••••••
1
1
2
2
2
2
2
2
6 90009-Z0H-003
BOLT, SOCKET, 5X20 ••••••••••
3
Serial No.
-------------------------------------------
Parts catalogue code
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
22
2005.11.17
E
F.R.T.
0.3
0.5
E-14
C 8
CARBURETOR
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
2
5
6
8
21
23
24
25
28
30
(19,22)
3111B7 GASKET, CARBURETOR PUMP ••••••
(4,7)
3111A0 BODY ASSEMBLY, PUMP ••••••••••
(1,3)
3111A1 BODY, AIR PURGE ••••••••••••••
3111E3 VALVE, INLET NEEDLE ••••••••••
3111D5 PUMP, PRIMER •••••••••••••••••
3111F3 CARBURETOR •••••••••••••••••••
3111C8 PACKING, CARBURETOR ••••••••••
(29)
4141E3 SHROUD, ENGINE •••••••••••••••
3111C7 O-RING, CARBURETOR BODY ••••••
(14)
3111C3 JET, MAIN ••••••••••••••••••••
F.R.T.
0.4
0.4
0.3
0.4
0.3
0.2
0.2
0.2
0.1
0.4
2
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
16010-ZM3-004
16011-Z0H-013
16013-Z0H-003
16014-ZM3-004
16015-Z0H-013
GASKET, METERING DIAPHRAGM ••
GASKET, PUMP ••••••••••••••••
DIAPHRAGM ASSY., METERING •••
DIAPHRAGM, PUMP •••••••••••••
BODY ASSY., PUMP ••••••••••••
1
1
1
1
1
6
7
8
9
10
16017-ZM3-004
16018-ZM3-802
16019-ZM3-004
16020-ZM3-004
16021-ZM3-004
BODY ASSY., AIR PURGE •••••••
SCREEN, INLET •••••••••••••••
VALVE, INLET NEEDLE •••••••••
SPRING, METERING LEVER ••••••
SCREW, METERING LEVER PIN •••
1
1
1
1
1
11
12
13
14
15
16022-ZM3-014
16023-ZM3-004
16024-Z0H-003
16025-ZM3-004
16026-ZM3-004
PIN, METERING LEVER •••••••••
LEVER, METERING •••••••••••••
RING, RETAINING •••••••••••••
O-RING ••••••••••••••••••••••
COVER, PRIMER PUMP ••••••••••
1
1
1
1
1
16
17
18
19
20
16027-ZM3-004
16028-ZM3-004
16029-ZM3-004
16030-ZM3-004
16031-ZM3-004
SWIVEL ••••••••••••••••••••••
SCREW, THROTTLE COLLAR ••••••
SCREW, PUMP COVER •••••••••••
SPRING, PUMP ••••••••••••••••
WASHER ••••••••••••••••••••••
1
2
4
1
1
21
22
23
24
25
16032-ZM3-004
16035-ZM3-802
16100-Z0Z-814
16221-Z0Z-000
19631-Z0Z-010
PUMP, PRIMER ••••••••••••••••
FILTER, FUEL INLET ••••••••••
CARBURETOR ASSY. (WYB 14B) ••
PACKING, CARBURETOR •••••••••
SHROUD ••••••••••••••••••••••
1
1
1
1
1
UMK
435T
Serial No.
Parts catalogue code
23
2005.11.17
E
E-14
C 9
CARBURETOR
2
Ref.
No.
26
27
28
29
Reqd. QTY
Part No.
90014-Z0H-003
90018-Z0H-003
91301-ZM3-000
91308-Z0H-003
91308-Z3E-000
30 99101-ZM5-0350
99101-Z0Z-0360
99101-Z0Z-0370
Description
BOLT, 5X53 ••••••••••••••••••
BOLT, SOCKET, 5X16 ••••••••••
O-RING, 14.8X2.4 ••••••••••••
O-RING, 12.3X2.4 ••••••••••••
••••••••••••••••••••••••••••
JET (#35) •••••••••••••••••••
JET (#36) •••••••••••••••••••
JET (#37) •••••••••••••••••••
UMK
435T
Serial No.
Parts catalogue code
2
2
1
1 -------- -------- UMT,U2T
1 -------- -------- UMST,UMTT,U2ST,U2TT
(1)
(1)
1
24
2005.11.17
E
E-15
C10
AIR CLEANER
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 3121B8 ELEMENT, AIR CLEANER •••••••••
2 3121A5 CASE, AIR CLEANER ••••••••••••
3 3121B1 COVER, AIR CLEANER •••••••••••
F.R.T.
0.1
0.1
0.1
2
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
17211-Z0Z-000
17220-Z0Z-000
17231-Z0Z-000
90009-Z0Z-003
90018-Z0H-003
ELEMENT, AIR CLEANER ••••••••
CASE COMP., AIR CLEANER •••••
COVER, AIR CLEANER ••••••••••
BOLT, SOCKET, 5X25 ••••••••••
BOLT, SOCKET, 5X16 ••••••••••
1
1
1
1
1
NUT, FLANGE, 5MM ••••••••••••
2
6 94050-05000
UMK
435T
Serial No.
Parts catalogue code
25
2005.11.17
E
E-16
C11
MUFFLER
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 3131C5 MUFFLER, EXHAUST •••••••••••••
2 3131B6 GUIDE, AIR EXHAUST •••••••••••
3 3131G8 GUIDE, AIR EXHAUST :UNDER ••••
2
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
18310-Z0Z-010
18515-Z0Z-300
18518-Z0Z-020
90001-Z0Z-003
90018-Z0H-003
MUFFLER COMP. •••••••••••••••
GUIDE, AIR ••••••••••••••••••
GUIDE COMP., UNDER AIR ••••••
BOLT, STUD 2,5X45.5 •••••••••
BOLT, SOCKET, 5X16 ••••••••••
1
1
1
2
2
6 90136-SM4-901
NUT, SELF-LOCK, 5MM •••••••••
2
UMK
435T
Serial No.
Parts catalogue code
26
2005.11.17
E
F.R.T.
0.1
0.1
0.1
E-17
C12
FUEL TANK
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1
2
5
6
7
3101J0
3101H7
3101A6
3101F1
3101L8
GROMMET, FUEL TUBE •••••••••••
TANK, FUEL •••••••••••••••••••
FILTER, FUEL •••••••••••••••••
TUBE, FUEL TANK ••••••••••••••
TUBE, FUEL RETURN ••••••••••••
F.R.T.
0.2
0.2
0.2
0.2
0.2
2
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
17504-ZM3-003
17511-Z0Z-013
17533-Z0H-000
17620-ZM3-816
17672-Z0H-003
GROMMET, FUEL TUBE ••••••••••
TANK, FUEL ••••••••••••••••••
RUBBER, TANK MOUNTING •••••••
CAP ASSY., FUEL TANK ••••••••
FILTER, FUEL ••••••••••••••••
1
1
4
1
1
6 17701-Z0Z-000
7 17702-Z0Z-J31
8 91401-ZM3-003
TUBE, FUEL TANK •••••••••••••
TUBE, FUEL RETURN •••••••••••
CLIP, TUBE ••••••••••••••••••
1
1
2
UMK
435T
Serial No.
Parts catalogue code
27
2005.11.17
E
E-19
C13
FLYWHEEL
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 6141A5 COIL, IGNITION(ONE) ••••••••••
.INCLUDES: Engine removal and
installation
3 2161B5 FLYWHEEL •••••••••••••••••••••
.INCLUDES: Engine removal and
installation
4 6111B3 CORD, STOP SWITCH ••••••••••••
2
Ref.
No.
Reqd. QTY
Part No.
Description
UMK
435T
1 30500-Z0Z-013
30500-Z3F-003
2 30522-Z0Z-000
30522-Z3F-000
3 31110-Z0Z-003
31110-Z3F-003
4 32195-Z0Z-J00
5 90012-Z0H-005
COIL ASSY., IGNITION ••••••••
••••••••••••••••••••••••••••
CLIP, HIGH TENSION CORD •••••
••••••••••••••••••••••••••••
FLYWHEEL COMP. ••••••••••••••
••••••••••••••••••••••••••••
CORD, STOP SWITCH •••••••••••
BOLT, SOCKET, 4X14 ••••••••••
1
1
1
1
1
1
1
2
6 94050-08000
NUT, FLANGE, 8MM ••••••••••••
1
Serial No.
-------------------------------------------
Parts catalogue code
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
-------- UMT,U2T
-------- UMST,UMTT,U2ST,U2TT
28
2005.11.17
E
F.R.T.
0.3
0.6
0.1
E-27
C14
TOP COVER
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 1111D6 COVER, ENGINE TOP ••••••••••••
F.R.T.
0.1
2
Ref.
No.
Reqd. QTY
Part No.
Description
1 19720-Z0Z-000ZA COVER COMP., TOP
*R280*..............POWER RED
2 90015-Z0H-003 BOLT, TOP COVER •••••••••••••
UMK
435T
Serial No.
Parts catalogue code
1
1
29
2005.11.17
E
E-28
C15
LABEL
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
NO INFORMATION •••••••••••••••
2
Ref.
No.
Reqd. QTY
Part No.
1 87135-ZE2-020
2 87521-Z0Z-000
87521-Z3F-000
3 87531-Z0Z-000
4 87601-Z0Z-J60
87601-Z3F-J80
5 87660-Z0Z-J00
Description
LABEL, E-SPEC (15.5X27.5) •••
MARK, EMBLEM ••••••••••••••••
••••••••••••••••••••••••••••
MARK, HONDA •••••••••••••••••
MARK, TYPE (GY5) ••••••••••••
MARK, TYPE (GY7) ••••••••••••
MARK (4-STROKE) •••••••••••••
UMK
435T
1
1
1
1
1
1
1
Serial No.
Parts catalogue code
-------- -------- UMT,U2T
-------- -------- UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
-------- -------- UMT,U2T
-------- -------- UMST,UMTT,U2ST,U2TT
30
2005.11.17
E
F.R.T.
F-1
D 1
HANDLE PIPE/THROTTLE LEVER
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1
2
3
4
5
7
8111F5
8101N3
8111C8
6151D9
8101AG
TUBE, CORRUGATE ••••••••••••••
LEVER ASSEMBLY, THROTTLE •••••
CABLE, THROTTLE ••••••••••••••
SWITCH, ENGINE STOP ••••••••••
PIPE ASSEMBLY, HANDLE ••••••••
(6,8)
8101N6 HOLDER, HANDLE •••••••••••••••
9 4131E1 GRIP, HANDLE :RIGHT ••••••••••
10 4131E0 GRIP, HANDLE :LEFT •••••••••••
F.R.T.
0.1
0.4
0.4
0.4
0.3
0.1
0.5
0.1
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
17735-VK9-A00
17850-VK9-A01
17910-VK9-A00
35120-VK9-A01
53100-VK9-A00
TUBE, CORRUGATE •••••••••••••
LEVER ASSY., THROTTLE •••••••
CABLE COMP., THROTTLE •••••••
SWITCH ASSY., ENGINE STOP •••
PIPE ASSY., HANDLE ••••••••••
1
1
1
1
1
6
7
8
9
10
53136-VK9-A01
53137-VK9-A01
53138-VK9-A01
53165-VK9-A00
53166-VK9-A00
HOLDER A, HANDLE ••••••••••••
HOLDER B, HANDLE ••••••••••••
HOLDER C, HANDLE ••••••••••••
GRIP, R. HANDLE •••••••••••••
GRIP, L. HANDLE •••••••••••••
1
1
1
1
1
11
12
13
14
90104-VK9-A01
90651-MA6-720
93893-05010-00
94002-06000-0S
BOLT, SOCKET, 6X30 ••••••••••
BAND, WIRE HARNESS ••••••••••
SCREW-WASHER, 5X10 ••••••••••
NUT, HEX., 6MM ••••••••••••••
6
1
1
2
UMK
435T
Serial No.
3
Parts catalogue code
31
2005.11.17
E
F-2
D 2
GEAR CASE
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 2091J8 SHAFT, CUTTER BLADE GEAR •••••
2 2161B0 CASE ASSEMBLY, CUTTER BLADE
GEAR ••••••••••••••••••••••••
3 2161B1 CASE, CUTTER BLADE GEAR ••••••
4 2091K2 PINION, CUTTER BLADE GEAR ••••
5 2091J9 GEAR, CUTTER BLADE BEVEL •••••
7
(6)
4151B8 DEFLECTOR, GRASS •••••••••••••
15 2091K1 BEARING, CUTTER BLADE GEAR
SHAFT :UPPER ••••••••••••••••
2091K3 BEARING, CUTTER BLADE GEAR
PINION :INNER •••••••••••••••
16 2091K4 BEARING, CUTTER BLADE GEAR
PINION :OUTER •••••••••••••••
17 2091K0 BEARING, CUTTER BLADE GEAR
SHAFT :LOWER ••••••••••••••••
3
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
23326-VK9-A02
41100-VK9-A02
41101-VK9-A01
41131-VK9-A01
41141-VK9-A01
SHAFT, GEAR •••••••••••••••••
CASE COMP., GEAR ••••••••••••
CASE, GEAR ••••••••••••••••••
PINION, BEVEL •••••••••••••••
GEAR, BEVEL •••••••••••••••••
1
1
1
1
1
6
7
8
9
10
76200-VK9-A01
76245-VK9-A01
76248-VK9-A01
90104-VK9-A01
90115-VK9-A01
DEFLECTOR ASSY., GRASS ••••••
DEFLECTOR COMP., GRASS ••••••
HOLDER, PROTECTOR •••••••••••
BOLT, SOCKET, 6X30 ••••••••••
BOLT, SOCKET, 10X12 •••••••••
1
1
1
3
1
11
12
13
14
15
93893-05010-00
94510-12000
94520-28000
94520-35000
96100-60010-00
SCREW-WASHER, 5X10 ••••••••••
CIRCLIP, EXTERNAL, 12MM •••••
CIRCLIP, INTERNAL, 28MM •••••
CIRCLIP, INTERNAL, 35MM •••••
BEARING, RADIAL BALL, 6001 ••
1
1
1
1
2
16 96120-60010-00 BEARING, RADIAL BALL, 6001 ••
17 96150-62020-10 BEARING, RADIAL BALL, 6202UU
1
1
UMK
435T
Serial No.
Parts catalogue code
32
2005.11.17
E
F.R.T.
0.8
0.2
0.6
0.4
0.7
0.1
0.7
0.4
0.4
0.7
F-3
D 3
FRAME
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
1 2121C0 OUTER, CLUTCH ••••••••••••••••
.INCLUDES: Engine removal and
installation
2 2121E8 HOUSING ASSEMBLY, CLUTCH •••••
.INCLUDES: Engine removal and
installation
3 2121B6 HOUSING, CLUTCH ••••••••••••••
.INCLUDES: Engine removal and
installation
4 4101M4 PIPE, FRAME ••••••••••••••••••
.INCLUDES: Engine removal and
installation
5 2131J5 SHAFT, DRIVE •••••••••••••••••
6 4101C3 BRACKET, ENGINE MOUNTING •••••
.INCLUDES: Engine removal and
installation
7 4101Q9 RUBBER, ENGINE MOUNTING ••••••
.INCLUDES: Engine removal and
installation
20 2121E7 BEARING, CLUTCH OUTER ••••••••
.INCLUDES: Engine removal and
installation
F.R.T.
0.4
0.3
0.7
0.5
0.2
0.6
0.6
0.5
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
22100-VK9-A02
22260-VK9-A02
22261-VK9-A01
40230-VK9-A00
41411-VK9-A00
OUTER COMP., CLUTCH •••••••••
HOUSING ASSY., CLUTCH •••••••
HOUSING, CLUTCH (A) •••••••••
PIPE ASSY., FRAME •••••••••••
SHAFT, DRIVE ••••••••••••••••
1
1
1
1
1
6
7
8
9
10
50225-VK9-A01
50237-VK9-A01
50374-VK9-A00
50376-VK9-A00
50378-VK9-A00
BRACKET, ENGINE MOUNTING ••••
RUBBER, ENGINE MOUNTING •••••
HANGER (A) ••••••••••••••••••
HANGER (B) ••••••••••••••••••
HANGER (C) ••••••••••••••••••
1
1
1
1
1
11
12
13
14
15
51511-VK9-A00
90011-VK9-A01
90102-VK9-A01
90104-VK9-A01
93893-05010-00
STAND •••••••••••••••••••••••
BOLT, TAPPING, 5X12 •••••••••
BOLT, SOCKET, 6X20 ••••••••••
BOLT, SOCKET, 6X30 ••••••••••
SCREW-WASHER, 5X10 ••••••••••
1
2
4
1
1
16
17
18
19
20
93893-05020-07
94510-15000
94520-35000
94520-45000
96130-62020-10
SCREW-WASHER, 5X20 ••••••••••
CIRCLIP, EXTERNAL, 15MM •••••
CIRCLIP, INTERNAL, 35MM •••••
CIRCLIP, INTERNAL, 45MM •••••
BEARING, RADIAL BALL, 6202 ••
1
1
1
1
1
UMK
435T
Serial No.
3
Parts catalogue code
33
2005.11.17
E
F-4
D 4
BLADE(UMST,UMT,UMTT)
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
3 2161B8 HOLDER, BLADE ••••••••••••••••
5 2161A4 BLADE, CUTTER ••••••••••••••••
2161A4A .Replace one cutter blade add
2161N0 BLADE, CUTTER :ALL •••••••••••
7 2161M9 PLATE, BLADE HOLDER ••••••••••
8
(17)
7101C6 HOLDER, BEARING ••••••••••••••
9 2161N2 MOWING SET •••••••••••••••••••
3
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
21911-VK9-A01
21914-VK9-A31
41125-VK9-A01
41126-VK9-A01
72511-VK9-A31
GUARD, GRASS ••••••••••••••••
GUARD, GRASS (C) ••••••••••••
HOLDER A, BLADE •••••••••••••
HOLDER B, BLADE •••••••••••••
BLADE •••••••••••••••••••••••
1
1
1
1
3
------------------------------------
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
6
7
8
9
10
72512-VK9-A31
72615-VK9-A31
72624-VK9-A31
72800-VK9-A31
90013-VK9-A31
PIN, 10MM •••••••••••••••••••
PLATE, BLADE HOLDER •••••••••
HOLDER, BEARING •••••••••••••
MOWING SET ••••••••••••••••••
BOLT, SOCKET, 6X12 ••••••••••
1
1
1
1
6
------------------------------------
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
11
12
13
14
15
90114-VK9-A31
90301-VK9-A31
90401-VK9-A31
90501-VK9-A31
93893-05010-00
BOLT-WASHER, 6X16 •••••••••••
NUT, U, 6MM •••••••••••••••••
WASHER ••••••••••••••••••••••
WASHER, SPRING, 6MM •••••••••
SCREW-WASHER, 5X10 ••••••••••
3
6
1
6
3
------------------------------------
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
-------- UMST,UMT,UMTT
16 94510-15000
CIRCLIP, EXTERNAL, 15MM •••••
17 96130-62020-10 BEARING, RADIAL BALL, 6202 ••
1
1
-------- -------- UMST,UMT,UMTT
-------- -------- UMST,UMT,UMTT
UMK
435T
Serial No.
Parts catalogue code
34
2005.11.17
E
F.R.T.
0.2
0.1
0.1
0.2
0.3
0.3
0.2
F-4-1
D 5
BLADE(U2ST,U2T,U2TT)
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
2 2161B9 HOLDER, BLADE(A) •••••••••••••
4 2161A4 BLADE, CUTTER ••••••••••••••••
6 2161N1 BLADE SET, CUTTER ••••••••••••
F.R.T.
0.1
0.1
0.1
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
21911-VK9-A01
41125-VK9-A01
41126-VK9-A01
72511-VK9-A01
72623-VK9-A01
GUARD, GRASS ••••••••••••••••
HOLDER A, BLADE •••••••••••••
HOLDER B, BLADE •••••••••••••
BLADE •••••••••••••••••••••••
COVER, BOLT •••••••••••••••••
1
1
1
1
1
------------------------------------
6 72800-VK9-A01 BLADE SET (2BLADE) ••••••••••
7 90301-VK9-A01 NUT, FLANGE, 10MM •••••••••••
8 93893-05010-00 SCREW-WASHER, 5X10 ••••••••••
1
1
3
-------- -------- U2ST,U2T,U2TT
-------- -------- U2ST,U2T,U2TT
-------- -------- U2ST,U2T,U2TT
UMK
435T
Serial No.
3
Parts catalogue code
-------- U2ST,U2T,U2TT
-------- U2ST,U2T,U2TT
-------- U2ST,U2T,U2TT
-------- U2ST,U2T,U2TT
-------- U2ST,U2T,U2TT
35
2005.11.17
E
F-28
D 6
LABEL
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
NO INFORMATION •••••••••••••••
Ref.
No.
3
Reqd. QTY
Part No.
1 87150-VF9-A00
2 87521-VK9-A00
Description
MARK, CAUTION •••••••••••••••
MARK, EMBLEM ••••••••••••••••
UMK
435T
Serial No.
Parts catalogue code
1
1
36
2005.11.17
E
F.R.T.
F-29
D 7
TOOL
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
F.R.T.
NO INFORMATION •••••••••••••••
Reqd. QTY
Ref.
No.
Part No.
Description
1
2
3
4
5
89101-VK9-A01
89216-VK9-A01
89221-KW3-000
89221-MJ4-000
89226-KW7-900
BAG, TOOL •••••••••••••••••••
WRENCH, BOX (P16X17) ••••••••
WRENCH, HEX., 4MM •••••••••••
WRENCH, HEX., 5MM •••••••••••
SPANNER, 8X10 •••••••••••••••
UMK
435T
Serial No.
3
Parts catalogue code
1
1
1
1
1
37
2005.11.17
E
F-40
D 8
SHOULDER BELT
(Relative ref. Number)
Ref.
L.O.N.
Description
No.
NO INFORMATION •••••••••••••••
Ref.
No.
3
Reqd. QTY
Part No.
1 60156-VK9-A01
2 68150-VK9-A01
3 89104-VK9-A00
Description
SCREEN, DUST ••••••••••••••••
BELT ASSY., SHOULDER ••••••••
CARRY BAG •••••••••••••••••••
UMK
435T
Serial No.
Parts catalogue code
1
1
1
38
2005.11.17
E
F.R.T.
PART NO. INDEX
Part Number
Address Page Ref.
10000
10100-Z0Z-405
10100-Z3F-405
C1
C1
16
16
1
1
12000
12209-Z0H-003
12209-Z3E-000
12310-Z0Z-000
12312-Z0Z-300
12314-Z0H-300
12367-Z0H-000
C4
C4
C1
C1
C1
C1
19
19
16
16
16
16
1
1
2
3
4
5
13000
13010-ZM5-000
13101-Z0Z-000
13111-ZM5-000
13310-Z0Z-000
C3
C3
C3
C3
18
18
18
18
14000
14126-Z0Z-003
14320-Z0Z-000
14400-Z0Z-003
14431-Z0H-003
14441-Z0H-003
14711-Z0Z-000
14711-Z0Z-800
14721-Z0Z-000
14721-Z0Z-800
14730-Z0Z-000
14740-Z0Z-000
14751-Z0Z-000
14771-Z0H-000
C4
C4
C4
C1
C1
C4
C4
C4
C4
C1
C1
C4
C4
19
19
19
16
16
19
19
19
19
16
16
19
19
C1
C1
C2
C1
C1
C1
C1
C1
C1
16
16
17
16
16
16
16
16
16
15000
15422-Z0Z-000
15510-Z0H-000
15510-Z3E-000
15571-ZM3-003
15600-Z3F-000
15600-ZM3-003
15625-Z0T-800
15625-ZE1-003
15721-Z0Z-000
16020-ZM3-004
16021-ZM3-004
16022-ZM3-014
16023-ZM3-004
16024-Z0H-003
16025-ZM3-004
16026-ZM3-004
16027-ZM3-004
16028-ZM3-004
16029-ZM3-004
16030-ZM3-004
16031-ZM3-004
16032-ZM3-004
16035-ZM3-802
16100-Z0Z-814
16221-Z0Z-000
1
2
17000
3
4 17211-Z0Z-000
17220-Z0Z-000
17231-Z0Z-000
17504-ZM3-003
2 17511-Z0Z-013
3 17533-Z0H-000
4 17620-ZM3-816
6 17672-Z0H-003
7 17701-Z0Z-000
5 17702-Z0Z-J31
5 17735-VK9-A00
6 17850-VK9-A01
6 17910-VK9-A00
8
9
18000
7
8 18310-Z0Z-010
18515-Z0Z-300
18518-Z0Z-020
10
11
29
12
14
14
15
15
16
C8
C8
C8
C8
C8
C8
C8
C8
23
23
23
23
23
23
23
23
1
2
3
4
5
6
7
8
Address Page Ref.
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
C8
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
C10
C10
C10
C12
C12
C12
C12
C12
C12
C12
D1
D1
D1
25
25
25
27
27
27
27
27
27
27
31
31
31
C11
C11
C11
26
26
26
19000
19611-Z0Z-000 C7
19631-Z0Z-010 C8
19720-Z0Z-000ZA C14
21000
21911-VK9-A01
21914-VK9-A31
16000
16010-ZM3-004
16011-Z0H-013
16013-Z0H-003
16014-ZM3-004
16015-Z0H-013
16017-ZM3-004
16018-ZM3-802
16019-ZM3-004
Part Number
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
22254-ZM5-003
22255-Z3F-000
22260-VK9-A02
22261-VK9-A01
Address Page Ref.
C7
C7
D3
D3
22
22
33
33
D2
32
23000
23326-VK9-A02
28000
28400-Z0Z-003
28414-Z0Z-000
28421-ZM3-003
28433-ZM3-003
28442-ZM3-003
28451-Z0H-003
28459-Z0H-003
28461-ZM3-003
1 28462-ZM3-003
2
30000
3
1
2 30500-Z0Z-013
3 30500-Z3F-003
4 30522-Z0Z-000
5 30522-Z3F-000
6
31000
7
1
2 31110-Z0Z-003
3 31110-Z3F-003
31914-Z0H-003
31915-Z0H-003
31916-Z0H-003
1
32000
2
3
32195-Z0Z-J00
C6
C6
C6
C6
C6
C6
C6
C6
C6
21
21
21
21
21
21
21
21
21
Part Number
D3
D3
D3
D3
D3
33 6
33 7
33 8
33 9
33 10
51511-VK9-A00
D3
33 11
D1
D1
D1
D1
D1
D1
31 5
31 6
31 7
31 8
31 9
31 10
D8
38
D8
38
1
2
3
4
5
6
7
8
9
53100-VK9-A00
53136-VK9-A01
53137-VK9-A01
53138-VK9-A01
53165-VK9-A00
53166-VK9-A00
60000
C13
C13
C13
C13
C13
C13
C1
C1
C1
C13
28
28
28
28
1 60156-VK9-A01
1
68000
2
2
68150-VK9-A01
72000
28 3
28 3 72511-VK9-A01
16 17 72511-VK9-A31
16 17 72512-VK9-A31
16 17 72615-VK9-A31
72623-VK9-A01
72624-VK9-A31
72800-VK9-A01
28 4 72800-VK9-A31
4 76200-VK9-A01
76245-VK9-A01
76248-VK9-A01
40230-VK9-A00
D3
33
4
34
35
34
1
1
2
C7
D3
C7
C7
C7
C7
22
33
22
22
22
22
2
1
3
3
5
4
41000
41100-VK9-A02
41101-VK9-A01
41125-VK9-A01
41126-VK9-A01
41131-VK9-A01
41141-VK9-A01
41411-VK9-A00
D5
D4
D4
D4
D5
D4
D5
D4
35
34
34
34
35
34
35
34
D2
D2
D2
32
32
32
76000
31
D2
D2
D4
D5
D4
D5
D2
D2
D3
2005.11.17
32
32
34
35
34
35
32
32
33
E
2
3
3
2
4
3
4
5
5
C15
D6
D6
C15
C15
C15
C15
C15
C15
30
36
36
30
30
30
30
30
30
89101-VK9-A01
89104-VK9-A00
89216-VK9-A01
89221-KW3-000
89221-MJ4-000
89226-KW7-900
Address Page Ref.
90001-Z0Z-003
90009-Z0H-003
2
90019-Z0H-003
90102-VK9-A01
4 90104-VK9-A01
5
6
7 90114-VK9-A31
5 90115-VK9-A01
8 90136-SM4-901
6 90206-ZM3-000
9 90301-VK9-A01
90301-VK9-A31
90401-VK9-A31
90501-VK9-A31
6 90651-MA6-720
7
91000
8
1
1
2
2
2
3
4
4
5
D7
D8
D7
D7
D7
D7
37
38
37
37
37
37
1
3
2
3
4
5
C11
C1
C7
C10
C1
D3
C13
C6
D4
C1
C2
C9
C14
C2
C6
C9
C10
C11
C2
D3
D1
D2
D3
D4
D2
C11
C2
D5
D4
D4
D4
D1
26
16
22
25
16
33
28
21
34
16
17
24
29
17
21
24
25
26
17
33
31
32
33
34
32
26
17
35
34
34
34
31
4
18
6
4
19
12
5
10
10
20
21
26
2
22
11
27
5
5
23
13
11
9
14
11
10
6
24
7
12
13
14
12
C3
C3
C3
C3
C9
C9
C9
C12
C6
C6
18
18
18
18
24
24
24
27
21
21
5
5
6
6
28
29
29
8
12
13
90000
90009-Z0Z-003
90010-Z0Z-003
90011-VK9-A01
90012-Z0H-005
90012-ZM3-003
90013-VK9-A31
90013-Z0H-004
90013-Z0Z-003
90014-Z0H-003
1 90015-Z0H-003
90017-Z0H-000
90018-Z0H-003
87000
87135-ZE2-020
87150-VF9-A00
87521-VK9-A00
87521-Z0Z-000
87521-Z3F-000
87531-Z0Z-000
87601-Z0Z-J60
87601-Z3F-J80
87660-Z0Z-J00
Part Number
89000
53000
D1
D4
D5
D4
Address Page Ref.
50000
4
5
2 50225-VK9-A01
3 50237-VK9-A01
50374-VK9-A00
50376-VK9-A00
50378-VK9-A00
1
51000
35000
22 1
23 25 35120-VK9-A01
29 1
40000
22000
22000-Z0Z-003
22100-VK9-A02
22253-Z0Z-003
22253-Z3F-000
22254-Z0Z-003
22254-Z3F-000
Part Number
E 1
91212-Z0H-003
91212-Z3E-000
91214-Z3F-000
91214-ZM3-003
91301-ZM3-000
91308-Z0H-003
91308-Z3E-000
91401-ZM3-003
91504-ZM3-003
91506-ZM3-000
4
39
PART NO. INDEX
Part Number
Address Page Ref.
Part Number
Address Page Ref.
Part Number
Address Page Ref.
93000
93500-03005-0A C2
93893-05010-00 D1
D2
D3
D4
D5
93893-05020-07 D3
17
31
32
33
34
35
33
25
13
11
15
15
8
16
31
25
28
17
32
33
34
32
32
33
33
14
6
6
26
12
17
16
13
14
18
19
94000
94002-06000-0S
94050-05000
94050-08000
94305-40102
94510-12000
94510-15000
94520-28000
94520-35000
94520-45000
D1
C10
C13
C2
D2
D3
D4
D2
D2
D3
D3
95000
95002-41200-08 C2
95002-41300-04 C2
17 27
17 28
96000
96100-60010-00 D2
96120-60010-00 D2
96130-62020-10 D3
D4
96150-62020-10 D2
32
32
33
34
32
15
16
20
17
17
99000
99101-Z0Z-0360 C9
99101-Z0Z-0370 C9
99101-ZM5-0350 C9
4
24 30
24 30
24 30
40
2005.11.17
E
E 2
Part Number
Address Page Ref.
Part Number
Address Page Ref.
F 1
PART NAME INDEX
Part name
Address
Page Ref.
[A ]
ARM, EX. VALVE ROCKER •••••••• C1
ARM, IN. VALVE ROCKER •••••••• C1
ARM, SWING ••••••••••••••••••• C6
16
16
21
7
6
7
BAG, TOOL •••••••••••••••••••• D7
BAND, WIRE HARNESS ••••••••••• D1
BEARING, RADIAL BALL, 6001 ••• D2
37
31
32
BEARING, RADIAL BALL, 6202 ••• D3
D4
BEARING, RADIAL BALL, 6202UU • D2
BELT ASSY., SHOULDER ••••••••• D8
BELT, TIMING ••••••••••••••••• C4
BLADE •••••••••••••••••••••••• D4
D5
BLADE SET •••••••••••••••••••• D5
BODY ASSY., AIR PURGE •••••••• C8
BODY ASSY., PUMP ••••••••••••• C8
BOLT-WASHER, 6X16 •••••••••••• D4
BOLT, 5X53 ••••••••••••••••••• C9
BOLT, CLUTCH ••••••••••••••••• C7
BOLT, SOCKET, 10X12 •••••••••• D2
BOLT, SOCKET, 4X14 ••••••••••• C13
BOLT, SOCKET, 5X12 ••••••••••• C2
BOLT, SOCKET, 5X16 ••••••••••• C6
C9
C10
C11
BOLT, SOCKET, 5X20 ••••••••••• C1
C7
BOLT, SOCKET, 5X25 ••••••••••• C10
BOLT, SOCKET, 5X32 ••••••••••• C1
BOLT, SOCKET, 6X12 ••••••••••• D4
BOLT, SOCKET, 6X20 ••••••••••• D3
BOLT, SOCKET, 6X30 ••••••••••• D1
D2
D3
BOLT, STUD 2, 5X45.5 ••••••••• C11
BOLT, TAPPING, 5X12 •••••••••• D3
BOLT, TOP COVER •••••••••••••• C14
BRACKET, ENGINE MOUNTING ••••• D3
33
34
32
38
19
34
35
35
23
23
34
24
22
32
28
17
21
24
25
26
16
22
25
16
34
33
31
32
33
26
33
29
33
1
12
15
16
20
17
17
2
4
5
4
6
6
5
11
26
3
10
5
23
11
27
5
5
18
6
4
19
10
13
11
9
14
4
12
2
6
[B ]
[C ]
CABLE COMP., THROTTLE ••••••••
CAP ASSY., FUEL TANK •••••••••
CAP ASSY., OIL FILLER ••••••••
CARBURETOR ASSY. •••••••••••••
CARRY BAG ••••••••••••••••••••
CASE COMP., AIR CLEANER ••••••
CASE COMP., GEAR •••••••••••••
CASE, GEAR •••••••••••••••••••
CASE, RECOIL STARTER •••••••••
CIRCLIP, EXTERNAL, 12MM ••••••
CIRCLIP, EXTERNAL, 15MM ••••••
D1
C12
C1
C8
D8
C10
D2
D2
C6
D2
D3
31
27
16
23
38
25
32
32
21
32
33
3
4
14
23
3
2
2
3
2
12
17
Part name
Address
Page Ref.
CIRCLIP, EXTERNAL, 15MM••••••• D4
CIRCLIP, INTERNAL, 28MM••••••• D2
CIRCLIP, INTERNAL, 35MM••••••• D2
D3
CIRCLIP, INTERNAL, 45MM••••••• D3
CLAMP, TUBE••••••••••••••••••• C2
34
32
32
33
33
17
CLIP, HIGH TENSION CORD•••••••
CLIP, TUBE••••••••••••••••••••
CLUTCH ASSY.••••••••••••••••••
COIL ASSY., IGNITION ••••••••••
COLLAR••••••••••••••••••••••••
COLLAR A, HEAD COVER ••••••••••
CORD, STOP SWITCH•••••••••••••
COVER COMP., TOP••••••••••••••
COVER, AIR CLEANER••••••••••••
COVER, BOLT•••••••••••••••••••
COVER, CYLINDER HEAD ••••••••••
COVER, FAN••••••••••••••••••••
COVER, PRIMER PUMP ••••••••••••
CRANKCASE SET•••••••••••••••••
CRANKSHAFT COMP.••••••••••••••
28
27
22
28
21
21
28
29
25
35
16
22
23
16
18
C13
C12
C7
C13
C6
C6
C13
C14
C10
D5
C1
C7
C8
C1
C3
16
13
14
18
19
27
28
2
8
2
1
12
13
4
1
3
5
2
1
15
1
4
[D ]
DEFLECTOR ASSY., GRASS••••••••
DEFLECTOR COMP., GRASS••••••••
DIAPHRAGM ASSY., METERING •••••
DIAPHRAGM, PUMP•••••••••••••••
6
7
3
4
D2
D2
C8
C8
25
1
C1
C12
C8
C13
16
27
23
28
5
5
22
3
C8
C8
D2
D1
D1
C12
C1
D4
23
23
32
31
31
27
16
34
D5
GUIDE COMP., UNDER AIR•••••••• C11
GUIDE, AIR•••••••••••••••••••• C11
GUIDE, ROPE••••••••••••••••••• C6
35
26
26
21
1
2
5
10
9
1
4
1
2
1
3
2
4
[E ]
ELEMENT, AIR CLEANER •••••••••• C10
[F ]
[G ]
GASKET, METERING DIAPHRAGM ••••
GASKET, PUMP••••••••••••••••••
GEAR, BEVEL•••••••••••••••••••
GRIP, L. HANDLE •••••••••••••••
GRIP, R. HANDLE •••••••••••••••
GROMMET, FUEL TUBE ••••••••••••
GROMMET, HEAD COVER •••••••••••
GUARD, GRASS••••••••••••••••••
2005.11.17
Address
E
Page Ref.
[H ]
HANGER•••••••••••••••••••••••• D3
33
HOLDER A, BLADE••••••••••••••• D4
D5
HOLDER A, HANDLE•••••••••••••• D1
HOLDER B, BLADE••••••••••••••• D4
D5
HOLDER B, HANDLE•••••••••••••• D1
HOLDER C, HANDLE•••••••••••••• D1
HOLDER, BEARING••••••••••••••• D4
HOLDER, PROTECTOR••••••••••••• D2
HOUSING ASSY., CLUTCH••••••••• D3
HOUSING, CLUTCH••••••••••••••• D3
34
35
31
34
35
31
31
34
32
33
33
8
9
10
3
2
6
4
3
7
8
8
8
2
3
24
30
21
8
C15
D1
C8
C1
C1
30
31
23
16
16
1
2
12
9
8
MARK•••••••••••••••••••••••••• C15
MARK, CAUTION••••••••••••••••• D6
MARK, EMBLEM•••••••••••••••••• C15
D6
MARK, HONDA••••••••••••••••••• C15
MARK, TYPE•••••••••••••••••••• C15
MOWING SET•••••••••••••••••••• D4
MUFFLER COMP.••••••••••••••••• C11
30
36
30
36
30
30
34
26
5
1
2
2
3
4
9
1
35
25
28
31
26
17
34
7
6
6
14
6
24
12
18
18
23
5
6
14
[J ]
JET••••••••••••••••••••••••••• C9
[K ]
KNOB, RECOIL STARTER•••••••••• C6
32
32
23
23
FILTER, BREATHER••••••••••••••
FILTER, FUEL••••••••••••••••••
FILTER, FUEL INLET••••••••••••
FLYWHEEL COMP. ••••••••••••••••
Part name
[L ]
LABEL, E-SPEC•••••••••••••••••
LEVER ASSY., THROTTLE•••••••••
LEVER, METERING•••••••••••••••
LIFTER COMP., EX. VALVE•••••••
LIFTER COMP., IN. VALVE•••••••
[M ]
[N ]
NUT,
NUT,
NUT,
NUT,
NUT,
NUT,
NUT,
FLANGE, 10MM•••••••••••••
FLANGE, 5MM••••••••••••••
FLANGE, 8MM••••••••••••••
HEX., 6MM••••••••••••••••
SELF-LOCK, 5MM•••••••••••
TAPPET ADJUSTING•••••••••
U, 6MM•••••••••••••••••••
D5
C10
C13
D1
C11
C2
D4
5
[O ]
OIL SEAL, 10X20X5••••••••••••• C3
OIL SEAL, 15X25X6••••••••••••• C3
O-RING•••••••••••••••••••••••• C8
41
F 2
PART NAME INDEX
Part name
Address
O-RING, 12.3X2.4 ••••••••••••• C9
O-RING, 14.8X2.4 ••••••••••••• C9
OUTER COMP., CLUTCH •••••••••• D3
Page Ref.
24
24
33
29
28
1
C8
C1
D2
D4
C8
C3
C2
D3
D1
C3
C1
C2
D4
C1
C4
C6
C8
23
16
32
34
23
18
17
33
31
18
16
17
34
16
19
21
23
24
15
4
6
11
3
26
4
5
2
11
29
7
17
3
6
21
C6
C4
C3
C8
C4
C6
D3
C12
21
19
18
23
19
21
33
27
3
8
1
13
2
9
7
3
38
23
31
32
33
34
35
33
23
17
16
17
23
21
17
23
16
19
33
32
23
37
1
7
13
11
15
15
8
16
10
25
20
21
18
10
22
17
3
1
5
1
25
5
[P ]
PACKING, CARBURETOR ••••••••••
PACKING, OIL FILLER CAP ••••••
PINION, BEVEL ••••••••••••••••
PIN, 10MM ••••••••••••••••••••
PIN, METERING LEVER ••••••••••
PIN, PISTON ••••••••••••••••••
PIN, SPRING, 4X10 ••••••••••••
PIPE ASSY., FRAME ••••••••••••
PIPE ASSY., HANDLE •••••••••••
PISTON •••••••••••••••••••••••
PLATE ASSY., OIL OUTLET VALVE
PLATE, BLADE HOLDER ••••••••••
PLUG, SPARK ••••••••••••••••••
PULLEY COMP., CAMSHAFT •••••••
PULLEY, RECOIL STARTER •••••••
PUMP, PRIMER •••••••••••••••••
[R ]
REEL, RECOIL STARTER •••••••••
RETAINER, VALVE SPRING •••••••
RING SET, PISTON •••••••••••••
RING, RETAINING ••••••••••••••
ROLLER, 4X31.8 •••••••••••••••
ROPE, RECOIL STARTER •••••••••
RUBBER, ENGINE MOUNTING ••••••
RUBBER, TANK MOUNTING ••••••••
[S ]
5
42
SCREEN, DUST ••••••••••••••••• D8
SCREEN, INLET •••••••••••••••• C8
SCREW-WASHER, 5X10 ••••••••••• D1
D2
D3
D4
D5
SCREW-WASHER, 5X20 ••••••••••• D3
SCREW, METERING LEVER PIN •••• C8
SCREW, PAN, 3X5 •••••••••••••• C2
SCREW, PAN, 4X8 •••••••••••••• C1
C2
SCREW, PUMP COVER •••••••••••• C8
SCREW, SETTING ••••••••••••••• C6
SCREW, TAPPET ADJUSTING •••••• C2
SCREW, THROTTLE COLLAR ••••••• C8
SEAL, HEAD COVER ••••••••••••• C1
SEAL, VALVE STEM ••••••••••••• C4
SHAFT, DRIVE ••••••••••••••••• D3
SHAFT, GEAR •••••••••••••••••• D2
SHROUD ••••••••••••••••••••••• C8
SPANNER, 8X10 •••••••••••••••• D7
Part name
Address
SPRING, METERING LEVER••••••••
SPRING, PUMP••••••••••••••••••
SPRING, RECOIL STARTER ••••••••
SPRING, VALVE•••••••••••••••••
STAND•••••••••••••••••••••••••
STARTER ASSY., RECOIL •••••••••
SWITCH ASSY., ENGINE STOP •••••
SWIVEL••••••••••••••••••••••••
Page Ref.
C8
C8
C6
C4
D3
C6
D1
C8
23
23
21
19
33
21
31
23
9
19
5
7
11
1
4
16
C12
C1
D1
C12
C12
C1
27
16
31
27
27
16
2
16
1
7
6
10
C4
C8
C4
C1
19
23
19
16
6
8
5
12
WASHER•••••••••••••••••••••••• C8
D4
WASHER, CLUTCH •••••••••••••••• C7
WASHER, SPRING, 6MM ••••••••••• D4
WASHER, WAVE•••••••••••••••••• C7
WRENCH, BOX••••••••••••••••••• D7
WRENCH, HEX., 4MM ••••••••••••• D7
WRENCH, HEX., 5MM ••••••••••••• D7
23
34
22
34
22
37
37
37
20
13
4
14
5
2
3
4
[T ]
TANK,
TUBE,
TUBE,
TUBE,
TUBE,
TUBE,
FUEL••••••••••••••••••••
BREATHER ••••••••••••••••
CORRUGATE•••••••••••••••
FUEL RETURN•••••••••••••
FUEL TANK•••••••••••••••
OIL •••••••••••••••••••••
[V ]
VALVE,
VALVE,
VALVE,
VALVE,
EX.••••••••••••••••••••
INLET NEEDLE •••••••••••
IN.••••••••••••••••••••
OIL OUTLET•••••••••••••
[W ]
2005.11.17
E
Part name
Address
Page Ref.
1
FOREWORD INDEX
2
ENGINE GROUP
3
FRAME GROUP
4
PART NUMBER INDEX
5
PART NAME INDEX
E.2005.11
Published by Honda Motor Co., Ltd.
Printed in Japan
February 20,2006
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
TITLE
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
001
(THAILAND-KD)
Block
No.
Ref.
No.
Reqd.QTY
Note
Serial No.
Description
Parts catalogue code
UMK
435T
E-7
CRANKSHAFT/PISTON
Ref.
No. LON
(Relative ref. Number)
Service item
4 1101R3
7 1101F0
E-7
Part No.
7
D
F.R.T.
CRANKSHAFT ASSEMBLY ・・・・・・・・・・
.INCLUDES: Engine removal and
installation
CRANKSHAFT ・・・・・・・・・・・・・・・・・・・
.INCLUDES: Engine removal and
installation
13310-Z0Z-305
1.4
1.6
CRANKSHAFT COMP. .............
(1)
-------
-------
UMST,UMTT,U2ST,U2TT
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1
April 16,2006
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
TITLE
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
002
(THAILAND-KD)
Block
No.
E-28
Ref.
No.
1
Reqd.QTY
Note
Part No.
Serial No.
Description
Parts catalogue code
UMK
435T
L
87135-ZE2-020
LABEL, E-SPEC (15.5X27.5) ....
1
-------
1240539
UMT,U2T
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1
September 03,2006
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
NEWS
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
003
(THAILAND-KD)
Block
No.
E-11
Ref.
No.
5
Reqd.QTY
Note
Part No.
Serial No.
Description
UMK
435T
E
28442-ZM3-003
*PARTS NO. DELETION
D
28442-Z0H-003
SPRING, RECOIL STARTER .......
1
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1
Parts catalogue code
October 22,2006
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
NEWS
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
004
(THAILAND-KD)
Block
No.
Ref.
No.
E-14
Reqd.QTY
Note
Part No.
Serial No.
Description
UMK
435T
CARBURETOR
ILLUSTRATION CORRECTED
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1
Parts catalogue code
November 02,2006
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
NEWS
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
005
(THAILAND-KD)
Block
No.
E-2
Ref.
No.
Reqd.QTY
Note
20
90013-Z0H-004
21
A
5
A
6
A
E-10
1
A
E-19
5
Serial No.
Description
Parts catalogue code
UMK
435T
A
E-7
Part No.
SCREW, PAN, 4X8 ..............
2
-------
-------
UMT,U2T
2
-------
1088910
UMST,UMTT,U2ST,U2TT
90013-Z3E-003
..............................
2
1088911
-------
UMST,UMTT,U2ST,U2TT
90013-Z0Z-003
SCREW, PAN, 4X8 ..............
2
-------
-------
UMT,U2T
2
-------
1088910
UMST,UMTT,U2ST,U2TT
90013-Z3F-003
..............................
2
1088911
-------
UMST,UMTT,U2ST,U2TT
91212-Z3E-000
OIL SEAL, 10X20X5 ............
1
-------
1088910
UMST,UMTT,U2ST,U2TT
91212-Z3E-003
..............................
1
1088911
-------
UMST,UMTT,U2ST,U2TT
91214-Z3F-000
OIL SEAL, 15X25X6 ............
1
-------
1088910
UMST,UMTT,U2ST,U2TT
91214-Z3F-003
..............................
1
1088911
-------
UMST,UMTT,U2ST,U2TT
12209-Z3E-000
SEAL, VALVE STEM .............
1
-------
1088910
UMST,UMTT,U2ST,U2TT
1
1183075
-------
UMT,U2T
12209-Z3E-003
..............................
1
1088911
-------
UMST,UMTT,U2ST,U2TT
90012-Z0H-005
BOLT, SOCKET, 4X14 ...........
2
-------
-------
UMT,U2T
2
-------
1088910
UMST,UMTT,U2ST,U2TT
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/2
PARTS CATALOGUE NEWS
BOOKNo.:18VK9602
Block
No.
Ref.
No.
Reqd.QTY
Note
Part No.
Description
Serial No.
Parts catalogue code
UMK
435T
A
90012-Z3E-003
..............................
2
1088911
-------
UMST,UMTT,U2ST,U2TT
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
2/2
March 11,2007
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
NEWS
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
006
(THAILAND-KD)
Block
No.
E-10
Ref.
No.
Reqd.QTY
Note
Part No.
Serial No.
Description
Parts catalogue code
UMK
435T
4
14400-Z0Z-003
A
14400-Z3F-003
BELT, TIMING (76ZU7 G-300) ...
..............................
1
-------
-------
UMT,U2T
1
-------
1022910
UMST,UMTT,U2ST,U2TT
1
1022911
-------
UMST,UMTT,U2ST,U2TT
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1
April 08,2007
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
NEWS
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
007
(THAILAND-KD)
Block
No.
Ref.
No.
Reqd.QTY
Note
Part No.
Serial No.
Description
Parts catalogue code
UMK
435T
PARTS NAME CORRECTED
E-16
4
T
90001-Z0Z-003
BOLT, STUD,5X56.5 ..........
2
-------
-------
UMT,U2T
D
90001-Z0Z-013
..............................
2
-------
-------
UMST,UMTT,U2ST,U2TT
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1
April 27,2008
CODE NO.
18VK9602
PARTS CATALOGUE NEWS
PARTS
CATALOGUE
NEWS
Honda Motor Co., Ltd. Service Division
UMK435T
PARTS CATALOGUE - CORRECTED
NEWS NO.
Printed in Japan
008
(THAILAND-KD)
Block
No.
E-12
Ref.
No.
Reqd.QTY
Note
Part No.
Serial No.
Description
Parts catalogue code
UMK
435T
2
22000-Z0Z-003
A
22000-Z3F-004
CLUTCH ASSY. .................
CLUTCH ASSY. (FCC) ...........
1
-------
-------
UMT,U2T
1
-------
1373007
UMST,UMTT,U2ST,U2TT
1
1373008
-------
UMST,UMTT,U2ST,U2TT
NOTE A:PART NO.CHANGE D:NEWLY PROVIDED E:PART NO.DELETION K:REQUIRED NO.CORRECTION L:APPLICATION SERIAL NO.CORRECTION
T:APPLICATION CORRECTION Z:REMARKS CHANGE
1/1

Similar documents

BRUSH CUTTER - Honda Power Products Indonesia

BRUSH CUTTER - Honda Power Products Indonesia ASSY. .... Assembly AT. ......... Automatic transmission C.D.I. ..... Capacitive discharge ignition COMP. ... Complete D.C. ....... Direct current EX. ........ Exhaust G.F.C.I ... Ground fault circ...

More information

Instructions for Parts Books

Instructions for Parts Books MUFFLER [L185] MUFFLER [L185DT] VALVE,ROCKER ARM HEAD COVER CAMSHAFT PISTON,CRANKSHAFT FLYWHEEL NOZZLE HOLDER FUEL CAMSHAFT SPEED CONTROL PLATE GOVERNOR DYNAMO RADIATOR NAME PLATE

More information