compressors — sanden

Transcription

COMPRESSORS — SANDEN
Compressor Identification
R12 Compressors
R134a Compressors
SD 5 10 HD
SD 7 H 15 HD
Sanden
Number of Cylinders
Port Location (H if on head, B if on Block)
Approx. Displacement (cubic centimeters/10)
Heavy Duty Clutch (HD) Sealed Heavy Duty (SHD)
Sanden
Number of Cylinders
Approx. Displacement (cu.in.)
Heavy Duty Clutch
TAG Identification
Serial No.
U.S.A. Models only
3X
Part Number
Lubricant Amount
COMPRESSORS
Lubricant Type
Refrigerant Type
Manufactured Month (03)
Manufactured Year (6)
Year of Manufacture (first digit)
Month of manufacture (last digit)
Jan-Sept.: 1-9
Oct.:X
Nov.:Y
Dec.:Z
Country Code
00-06 Japan
70-79 USA
80-89 Singapore
Compressor Specifications
MODEL
CYL.
SD 508, HD
5
SD 5H09
5
SD 510, HD
5
SD 5H14, HD
5
SD 709
7
SD 7H13
7
SD 7H15, HD
7
SD 7H15SHD
7
SD 7H15 Super HD 7
REFRIG.
R12
R134a
R12
R134a
R12
R134a
R134a
R134a
R134a
DISPL.
WEIGHT
CU IN (cc)
lbs.
8.4 (138)
17.1
5.3 (87)
12.3
9.8 (161)
16.5
8.4 (138)
17.2
7.9 (130)
15.2
7.9 (130)
13.9
9.5 (155)
15.2
9.5 (155)
17.6
9.5 (155)
15.2
NOTE
2
2
2
2
2
2
1 and 2
1 and 2
1 and 2
OIL
TYPE
Mineral
PAG SP-15
Mineral
PAG SP-15
Mineral
PAG SP-15
PAG SP-15
PAG SP-15
PAG SP-15
ROTATION
CW / CCW
CW
CW
CW / CCW
CW
CW
CW
CW
CW
FACTORY OIL
CHARGE cc.
Refer to
Illustration
Section
pages 251-270
for Oil Capacity.
NOTE 1: Since 2005 most Sanden compressors have enough oil for the entire system. Check Sanden label for oil amount.
NOTE 2: Provided that no major oil loss occurred in the system, add the following amount of oil for each component.
a.) Reciever Drier ...... 1 oz.
b.) Accumulator ........ 1 oz. plus same amount drained from old unit
c.) Condenser ............ 1 oz.
d.) Evaporator .......... 2 oz.
e.) Hose ...................... None (all hoses replaced add 1 oz. total)
f.) System Flushed .... add 1 -2 oz. extra to the system
Acceptable Mounting Angles
R134a PAG SP15 Oil
SP15 replaces SP20 and is completely
interchangeable. Mixing PAGs is
acceptable and will not void the warranty.
8248 ......... 8.45 oz.
Used when servicing Sanden Compressors
in systems that are charged with R134a.
For use with SD 5H14, 7H15 Compressors.
234
8166
Dipstick - Sanden
oil level checker
© 2011 MEI Corporation
SANDEN — COMPRESSORS
Selecting The Correct Sanden Compressor
There are several different ways to choose the correct Sanden replacement compressor.
Application - refer to the application section looking up application by Make, Year and Model and select the compressor
needed. If it is not listed in the application section then…
Part Number Description:
1. Locate the Identification Tag on the compressor body - the “Model No.” found in the upper right corner is the Sanden
“Part Number” needed.
2. Refer to the chart on page 240. The chart is listed in ascending order by the Sanden part numbers along with our
corresponding number and the compressors characteristics or specifications.
3. Verify the compressor using the visual photo section. Part numbers are listed by our part number in ascending order.
2.
3.
Part No.
Visual Description - if the identification tag cannot be read or is missing or if the compressor is being changed out - the
following information will be needed:
1. Refrigerant Type: R134a or R12 - check vehicle for refrigerant label
2. Head Type: Vertical, Horizontal (Sanden usually casts up to three alpha code in the head ie: JDA)
3. Head Fitting Type: O’Ring Type 3/4"x7/8"; Tube-O Type 1"-14 or Pad Type
4. Clutch Voltage: Determine if 12 or 24 Volt System
5. Clutch Type: Determine if Single, Double or Multi Groove Clutch Pulley
6. Clutch Diameter: Measure the Diameter of the Pulley
7. Clutch Connection: Single or Double Wire, Bullet, MetriPack or WeatherPak
8. Clutch A-B Distance: For proper belt alignment, accurately measure the A-B Distance
9. Mounting Type: Ear Mount or Direct Mount (crossbolt or tangential) Type
10. Service Valve: Choose the correct service valve using that section of this catalog
Typical Examples:
Single Groove Clutch
Double Groove Clutch
Multi Groove Clutch
A-B
Distance
Diameter
DIRECT MOUNT
EAR MOUNT
PRESSURE RELIEF VALVE
VERTICAL TUBE-O 1”-14
VERTICAL
O’RING 3/4x7/8
HORIZONTAL
PAD TYPE
Groove
Width
CLUTCH CONNECTIONS
235
COMPRESSORS
1.
NOTE: All heads supplied with gasket.
If part number is not shown, head is N/A (Not Available).
Rear Head and Identification
Style B
Style C
5628
5634
5627
Vertical Flare 3/4” x 7/8”
SD508,510 Compressor
with R12 Charging Ports
Vertical Tube-O’ring 1” x 14
SD5H14 Compressor
w/o Charging Ports
7H13, 7H15 Compressor
w/o Charging Ports
Style FC
COMPRESSORS
Style CB
Style FG
SD7H15 Compressor
with Pressure Relief Valve
Style FL
5620
5621
5625
Vertical O’ring 3/4” x 7/8”
7H14 Compressor
w/o Charging Ports
SD505, 507, 510 Compressors
5H14 Compressor
w/o Charging Ports
Style GK
Style CBA
Style GH
Horizontal Pad (Freightliner)
Slimline Connections
Style GSA
Style GQ
Style GV
5602
Horizontal Pad 3/4” x 7/8”
SD7H15 Compr. with Pressure
Relief Valve and w/Switch Port
Lateral Pad 3/4” x 7/8”
SD7H15 Compressor
236
FLX7
GV Style Rear Pad Head
(uses 0121 o-rings)
Style JDA
Style JD
Style GWA
Horizontal Pad (Navistar)
SD7H15 Compressor
Lateral Pad
Kenworth, Peterbilt
Style K
5626
5601
5643
7H13, 7H15 Compressor
w/o Charging Ports
SD7H15 Compressor
Horizontal O’ring 3/4” x 7/8”
SD5H14 Compressor
w/o Charging Ports
Style KC
5638C (Thin Head)
SD7H15 Compressor
w/o Pressure Relief Valve
Style KCA
(Thick Head)
SD7H15 Compressor
Style MD
5632
Horizontal Tube-O’ring 1” x 14
SD708, 7H15 Compressor
w/o Charging Ports
Style KG
5638G (Thin Head)
5631
SD7H15 Compressor
w/o Pressure Relief Valve
Horizontal O’ring 1” x 14
w/o Charging Ports
5603
Horizontal Tube-O’ring 1”x14
SD7H15 Compressor
w/o Charging Ports
5622
Horizontal Tube-O 1” x 14
SD7H15 Compressor
Style Q
Style PK
Style N
Style MJA
Style MJ
Style MDA
Horizontal Tube-O’ring 1”x14
SD7H15HD Compressor
w/o Charging Ports
Style M
COMPRESSORS
Rear Head and Identification (continued)
Style QC
5630
SD505,508, 510 Compressors
Side Pad (Lateral)
7H15SHD with Pressure Relief
Valve and w/Switch Port
Style QD
Style QH
Horizontal GM Pad M10x1.25
7H13, 7H15, 7H15HD
w/o Charging Ports
Horizontal GM Pad
SD508, 510, 5H14 Compr.
w/o Charging Port Holes
Style QM
SD7H15 Compressor
x 24” Bolt Holes
3/8”
Style SJ
5624
Horizontal GM Pad Type
SD508, 510 Compressors
Horizontal GM Pad Type
SD510HD Compressor
Horizontal Special Pad
SD7H15 Compressor
237
Rear Head and Identification (continued)
Style UB
Style UD
Style UK
Style WH
5639
Vert. Pad M10x1.25 Bolt
w/o Charging Port
COMPRESSORS
Style WJ
Vertical Pad (Ford/Sterling)
SD7H15 Compressor
w/o Charging Port
with Switch Port
Horizontal Pad M10 x 1.25 Bolt
SD5H14 Compressor
w/o Charging Port
Style WV
Horizontal Tab 3/4” x 7/8”
SD7H15 Compressor(Volvo)
Vertical Pad M10 x 1.25 Bolt
SD7H15, 7H15HD Compressor
w/o Charging Port
Vertical Pad (Ford/Sterling)
SD7H15 Compressor
w/o Charging Port
with Switch Port
Style 4802
Style 4418
Side Pad (Lateral)
7H15SHD with Pressure Relief
Valve and w/Switch Port
Vertical Pad
7H15SHD (Navistar)
Passenger and Light Truck Applications
Dodge, Cadillac, Chev/GMC Truck
MAKE
MODEL
ENGINE
DESCRIPTION
PART NO. #
DODGE
2002 -1995 ...... Dakota ........................................ 3.7L ........................................ PV7, 130mm Dia. .......................... 54785
2003 - 2001 ..... Durango ..................................... 4.7L (w/single evap) .............. PV6, 130mm Dia. .......................... 54825
DODGE PICKUP
2003 - 1996 ..... T-300 RAM ................................ 5.9L, 8.0L Diesel ................... PV8, 119 mm Dia. ......................... 54775
2002 - 1995 ..... T-300 RAM ................................ 5.9L, 8.0L Gas ....................... PV7, 130mm Dia. .......................... 54785
GM Passenger Car and Light Truck (Sanden NEW Compressor)
USE to REPLACE Delphi HT-6 on the following GM vehicles)
2000 - 1999 ..... Cadillac Escalade ...................... 5.7L ........................................
1998 - 1996 ..... Blazer, Jimmy ............................ 4.3L ........................................
1999 - 1996 ..... C/K, Sierra 1500 ........................ 4.3, 5.0, 5.7L .........................
2000 - 1996 ..... C/K, Sierra 2500,3500 .............. 5.0, 5.7L ................................
1999 - 1996 ..... Suburban 1500,2500 ................. 5.0, 5.7L ................................
1999 - 1996 ..... P30, 3500 Van ........................... 4.3, 5.7L ................................
1998 - 1996 ..... S10, Sonoma ............................. 4.3L ........................................
2000 - 1996 ..... Tahoe, Yukon ............................ 5.7L ........................................
238
PV6,
PV6,
PV6,
PV6,
PV6,
PV6,
PV6,
PV6,
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
Dia. ..........................
Dia. ..........................
Dia. ..........................
Dia. ..........................
Dia. ..........................
Dia. ..........................
Dia. ..........................
Dia. ..........................
54440
54440
54440
54440
54440
54440
54440
54440
T1
T2
w/o diode
1 Wire, Male, Bullet
T5D
w/diode
2 Wire, Female
T9
Black Red +
T13
w/o diode
2 Wire
J1
J1 - Jumper
T3 w/o diode
T3D w/diode
w/o diode
1 Wire, Female
1 Wire, Male
T6 w/o diode
T6D w/diode
T7
2 Wire
Black B/W +
T10 w/o diode
T10D w/diode
w/o diode
2 Wire, AMP
* Note: Compressor supplied may have a different style connector than illustration provides.
May require reuse of original connector, or use of jumper wire.
Black White +
Red +
2 Wire, Ford
w/o diode
2 Wire, Deutsch
T11D
Black B/W +
w/diode
2 Wire
T4
w/o diode
1 Wire, Male
T8
Black Red +
w/o diode
2 Wire, Female
Black B/W +
T12 w/o diode
T12D w/diode
2 Wire, Male
T14 w/o diode
T14D w/diode
T15
3 Wire
1 Wire, AMP, Spade
w/o diode
T16 w/o diode
T16D w/diode
1 Wire, Bullet
J2
J2 - Jumper
239
COMPRESSORS
Wire End Types
COMPRESSORS
Listed in ascended order by Sanden Number
SANDEN#
NUMBER
1027K8
1027M6
1027P4
1027S4
1027T6
1027U3
4018
4019
4020
4021
4023
4024
4025
4026
4027
4028
4029
4034
4036
4039
4040
4041
4042
4046
4047
4051
4052
4061
4066
4070
4071
4072
4074
4075
4076
4077
4078
4080
4081
4082
4083
4084
4086
4087
4088
4090
4092
4093
4096
4097
4098
4099
4261
4269
4271
4272
4277
AIRSOURCE
COMPR
5365
5333
5385
5348
5362
5366
54018
54019
54020
54021
54023
54024
54025
54026
54027
54028
54029
5306
54036
5362
5366
5373
5365
54046
54047
54051
54052
5429
54066
54070
54071
54072
54074
5333S
5334S
5365S
5402
5366S
5406
5396
54083
5397
54086
54087
54088
5707S
54025
54093
54096
54097
54098
54099
54261
5749A
5752A
5412A
54277
NUMBERS
CLUTCH
5137
5137 (8)
5165 (8)
5176 (7)
5168 (7)
5164 (8)
50412
–
5137
–
5164S
NSS (9)
NSS
NSS
NSS
NSS
50412
50412
5164 (8)
5164 (8)
5138
5137 (8)
50412S
–
5132(10)
–
–
–
5164S
5178S
(9)
5137S
5164S
5137S
50414S
5164S
5137S
5178S
5137
5137S
NSS
NSS
50414S
5137S
–
5132 (10)
NSS
5178S
–
–
–
5058A
5058A
5064A
–
HEAD
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5626
–
–
–
–
–
–
–
–
–
MODEL
7H15E
7H15E
7H15E
7H15E
7H15E
7H15E
7H15HD
7H15E
7H15E
7H15E
SPRHD
SPRHD
SPRHD
SPRHD
7H15HD
7H15HD
SPRHD
7H15E
7H15E
7H15HD
7H15HD
7H15HD
7H15HD
7H15E
SPRHD
7H15E
7H15E
7H15
7H15E
7H15HD
SPRHD
SPRHD
7H15HD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
7H15
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
7H15HD
7H15E
SPRHD
SPRHD
SPRHD
SPRHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15E
FITTING
HEAD
GQ
GH
WV
GWA
GH
GQ
4018
GH
GH
GK
4802
GQ
WH
WV
GV
GV
SQ
GV
GH
GH
GQ
GQ
GQ
KF
WJ
GV
GV
4809
GV
JDA
WH
MDA
JDA
GH
GH
GQ
GQ
GQ
GSA
GH
WH
MDA
KGA
GSA
MDA
KCA
JD
JD
KCA
4802
4802
4802
GT
KG
JD
KG
4418
POS
V
H
H
H
H
V
V
H
H
H
V
V
V
H
H
H
H
H
H
H
LAT
LAT
LAT
H
V
H
H
V
H
V
V
–
V
H
H
V
V
LAT
V
H
V
H
H
V
H
H
V
V
H
–
–
V
V
H
V
H
–
SIZE
Pad @ 90°
Pad
Rear o’ring
Rear o’ring
Pad
Pad @ 90°
Pad Top
Pad
Pad
Pad M10
Pad @ 90°
Pad @ 90°
Pad @ 45°
Pad
Pad M10
Pad M10
Pad
Pad M10
Pad
Pad
Pad
Pad
Pad
1"1/16x3/4
Pad
Pad M10
Pad M10
Pad @ 90°
Pad M10
3/4x7/8
Pad
1x14
3/4x7/8
Pad
Pad
Pad
Pad @ 90°
Pad
Pad
Pad
Pad
1x14
3/4x7/8
Pad
1x14
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
–
–
Pad Top
Pad @ 90°
3/4x7/8
3/4x7/8
3/4x7/8
–
Mount
Dir
Dir
Dir
Dir
Dir
Dir
Dir sh
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Dir
Dir
Dir
Dir
Ear
Ear
Ear
Dir
Dia. PULLEY
mm grv volt
119 8
12v
119 8
12v
130 8
12v
119 8
12v
125 6
12v
125 6
12v
126 10 12v
119 6
12v
119 8
12v
119 8
12v
125 6
12v
119 8
24v
119 8
12v
130 7
24v
125 6
12v
119 8
12v
149 8
24v
119 10 12v
119 10 12v
125 6
12v
125 6
12v
125 2
12v
119 8
12v
119 8
12v
126 10 12v
126 12 24v
125 2
24v
122 6
12v
119 8
24v
126 12 12v
125 6
12v
140 8
12v
119 8
24v
119 8
12v
125 6
12v
119 8
12v
126 12 12v
125 6
12v
123 8
12v
140 8
12v
123 8
12v
123 8
12v
119 8
12v
126 7
12v
126 12 12v
119 8
12v
125 6
12v
125 2
24v
126 7
12v
140 8
12v
160 6
12v
160 8
12v
112 6
12v
132 2
24v
132 2
24v
132 2
12v
119 8
12v
WIRE
END
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T7
T5D
T9
T14D
T16D
T3D
T3D
T16D
T5D
T5D
T5D
T5D
T5D
T5D
T12
T5D
T3D,J1
T3D,J1
T8
T3D,J1
T3D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T2
T5D
T5D
T5D
T14
T3D
T5D
T5D
T5D
T5D
T13
T3D
T3D
T3D
T5D
SHAFT
Key
Key
Key
Spline
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Key
Key
Key
–
OIL
cc’s
200
300
300
200
200
200
300
300
300
300
300
300
300
175
250
250
175
300
240
300
300
300
300
270
300
300
300
74
300
300
300
300
300
300
300
300
240
300
300
300
300
300
240
300
300
300
300
200
300
300
300
300
135
200
200
200
300
NOTE: Refer notes and abbreviations on page 248.
240
SANDEN#
NUMBER
4280
4281
4283
4286
4289
4291
4298
4300
4301
4302
4303
4304
4305
4306
4307
4308
4308F
4309
4310
4314
4318
4322
4324
4325
4326
4327
4332
4342
4347
4352
4355
4362
4368
4369
4370
4376
4376
4377
4378
4379
4381
4382
4383
4384
4388
4389
4391
4392
4393
4394
4396
4398
4399
4400
4401
4402
4404
AIRSOURCE
COMPR
54280
5706E
54283
5385S
54289
54291
54298
5304
5316
5318
5322
5370
5323
5394
5403
54308
54308F
54309
54310
5395
5299
54322
54324
call
5404
54327
5701
5410
5400
5333S
54355
5710
5365S
5369
5402
5362S
5362S
5366S
54378
54087
call
54382
5373
54384
54388
54389
5707S
5363S
5363S
54394
5700
5406
54399
5409
5288E
54402
54404
NUMBERS
CLUTCH
HEAD
NSS
–
–
–
NSS
–
–
5120
–
–
–
5632
5120
–
–
–
5174
–
50406
–
5122
–
5116 (10) –
5137
–
–
–
–
–
50413
–
5137
–
5137S
–
–
–
5137
–
(9)
–
5058A
–
NSS
–
–
–
–
–
–
–
50412
–
5137S
–
5120
–
–
–
5137S
–
50412S
–
50414S
–
5164S
–
5164S
–
5164S
–
NSS (9)
–
NSS
–
NSS
–
–
–
5138S
–
50412S
–
NSS
5137S
5138S
–
5137S
–
5137S
NSS
–
50401
5137
MODEL
SPRHD
–
7H15E
SPRHD
7H15HD
7H15E
SPRHD
7H15SHD
7H15SHD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
SPRHD
7H15HD
7H15HD
SPRHD
7H15HD
SPRHD
7H15HD
7H15HD
7H15
7H15E
SPRHD
7H15E
7H15HD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
SPRHD
7H15E
SPRHD
SPRHD
7H15HD
SPRHD
–
SPRHD
–
SPRHD
SPRHD
–
SPRHD
–
7H15
–
SPRHD
–
SPRHD
–
7H15
–
7H15E
–
7H15E
5638G 7H15HD
FITTING
HEAD
GQ
–
4095
WV
4289
4095
WV
MD
GK
GK
WH
WJ
WJ
KCA
WJ
GV
GV
GV
GV
4802
UK
GSA
WV
JD
WV
GV
SJA
4850
4347
GH
GK
GT
GQ
GSA
GQ
GSA
GSA
GQ
4802
GSA
MDA
GWA
GQ
GQ
GSA
GSA
KCA
JDA
JDA
MDA
GT
GSA
GV
4400
GV
MD
KG
POS
V
–
H
H
–
H
–
H
H
H
V
V
–
H
V
H
H
H
H
V
V
V
H
V
H
H
H
–
V
H
H
V
V
V
LAT
–
V
V
V
V
H
H
LAT
V
V
V
H
V
V
H
V
V
H
–
H
H
H
SIZE
–
Pad
3/4x7/8
–
Pad
–
1x14
Pad M10
Pad M10
Pad @ 45°
Pad
Spc’l Pad
3/4x7/8
Pad
3/4x7/8
3/4x7/8
Pad M10
Pad M10
Pad Top
Pad
Pad
Rear o’ring
3/4x7/8
Rear o’ring
Pad M10
Pad
–
Pad Top
Pad
Pad M10
Pad @ 90°
Pad @ 90°
Pad
Pad
–
Pad
Pad @ 90°
Pad @ 90°
Pad
1x14
o’ring rear
Pad
Pad @ 90°
Pad
Pad
3/4x7/8
3/4x7/8
3/4x7/8
1x14
Pad @ 90°
Pad
Pad M10
–
Pad M10
1x14
3/4x7/8
Mount
Dir
–
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Dir
Ear
Ear
Ear
Dir
Dir
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Dir
Dir
Dir
Ear
Ear
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dia. PULLEY
mm grv volt
125 6
24v
–
–
–
152 8
12v
130 8
12v
126 7
12v
130 8
24v
180 8
24v
152 8
24v
130 8
24v
152 8
24v
119 8
12v
125 6
12v
119 8
12v
132 2
12v
119 8
12v
152 2
12v
152 2
12v
126 10 24v
119 8
12v
119 8
12v
132 2
12v
119 8
12v
180 8
24v
132 2
24v
180 8
12v
119 8
24v
130 7
12v
119 8
12v
119 10 12v
119 8
12v
130 8
24v
119 7
12v
119 8
12v
126 10 12v
126 12 12v
125 6
12v
125 6
12v
125 6
12v
126 12 12v
126 7
12v
126 12 12v
119 6
12v
125 2
12v
126 10 12v
126 7
12v
126 7
24v
119 8
12v
125 2
12v
132 2
12v
119 8
12v
119 7
12v
119 8
12v
119 7
12v
120 8
12v
125 2
12v
138 1
24v
119 8
12v
WIRE
END
T5D
–
T7
T5D
n/a
T7
T16D
T2
T7
T7
T14
T10
T10
T5D
T5D
T3D
T3D
T3D,J1
T3D
T5D
T5D,J2
T5D
T16D
T4
T5D
T3D,J1
T8
T8
T5D
T5D
T7
T8
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
n/a
T5D
T5D
T3 *
T5D
T8
T5D
T11D,J3
T8
T3D
T2D
T5D
SHAFT
Key
Key
–
Key
–
–
–
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Spline
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
OIL
cc’s
300
175
300
300
180
180
280
285
300
300
300
300
300
300
300
135
135
200
200
300
300
175
300
300
200
240
75
300
300
300
240
300
300
240
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
74
300
135
74
300
300
300
241
COMPRESSORS
Listed in ascended order by Sanden Number (continued)
COMPRESSORS
SANDEN#
NUMBER
4405
4407
4408
4409
4410
4411
4412
4417
4418
4419
4420
4421
4422
4423
4424
4425
4426
4427
4428
4429
4430
4431
4432
4433
4434
4435
4440
4451
4453
4455
4456
4457
4458
4460
4465
4467
4468
4469
4471
4472
4473
4474
4475
4477
4478
4479
4480
4482
4484
4485
4486
4487
4488
4489
4490
4491
4492
AIRSOURCE
COMPR
54405
54407
54408
54409
54410
54412
54412
5333
5393
5288
5285
5331
5322
–
5362
5366
5373
5323
5394
5336
5334
5326
5365
5363
5290
5291
54440
54451
call
54455
54456
5290A
5290C
5282A
5409
5298
5391
5771
5327
5336
5334
5770
5330
5326
5300
5312
5314
5331
5363
5333
5322
5313
5328
5302
5383
5329
5345
NUMBERS
CLUTCH
HEAD
(9)
–
50412
–
5164S
–
50404
–
5137S
–
50412S
–
50412S
–
5137
–
5137
–
5138
–
5137
–
5137
–
5122
–
–
–
5164
–
5164
–
5138
–
5122
–
5116
–
5116
–
5164
–
5137
–
5137
–
5138
–
5116
–
5058A
–
–
–
5068
–
5137 (9)
–
5065
–
5066
–
5116
–
5116
–
5137
–
–
–
–
–
5119
–
5139
–
5116 (10) –
5116 (10) –
5164
–
5122
–
5168 (7)
–
5137
–
5057D
5632
5134
–
5024
5638C
5137
–
5163
5601
5137
–
–
–
5120
–
5116
5601
50404
5632
5165
–
5116 (10) 5626
5164 (7)
–
MODEL
7H15HD
7H15HD
SPRHD
7H15E
SPRHD
SPRHD
SPRHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15E
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15
7H13
7H13
7H15-FLX
7H15-FLX
7H15-FLX
7H15HD
7H15HD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15SHD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15HD
7H15SHD
7H15HD
7H15HD
7H15HD
FITTING
HEAD
JDA
4418
GSA
JD
WJ
MDA
MDA
GH
4418
GV
GV
MDA
WH
WJ
GSA
GQ
GQ
WJ
KCA
GH
GH
MDA
GQ
JDA
GV
GV
GT
GV
MDA
JE
JE
GV
GV
GV
4400
UK
GK
WJ
MDA
GH
GH
WH
CBA
MDA
MD
GK
KC
MDA
JDA
GH
WH
GK
JDA
MD
WV
JD
MDA
POS
V
V
V
V
V
H
H
H
V
H
H
H
V
V
V
LAT
LAT
–
H
H
H
H
LAT
V
H
H
V
H
H
V
V
H
H
H
V
V
H
V
H
H
H
V
V
H
H
H
H
H
V
H
V
H
V
H
H
V
H
SIZE
3/4x7/8
PAD O-ring
Pad
3/4x7/8
Pad
1x14
1x14
H Pad
PAD O-ring
Pad M10
Pad M10
1x14
Pad @ 45°
Pad
Pad
3/4x7/8
3/4x7/8
Spc’l Pad
3/4x7/8
H Pad
H Pad
1x14
3/4x7/8
3/4x7/8
Pad M10
Pad M10
Pad @ 90°
Pad M10
GM metric
3/4x7/8
3/4x7/8
GM metric
GM metric
GM metric
Pad @ 90°
Pad
Pad M10
Pad
1x14
H Pad
Pad
Pad @ 45°
1x14
1x14
1x14
Pad M10
3/4x7/8
1x14
3/4x7/8
Pad
Pad @ 45°
Pad M10
3/4x7/8
1x14
Rear o’ring
3/4x7/8
1x14
Mount
Dir
Dir
Ear
Ear
Dir
Dir sh
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Ear
Dir
Ear
Dir
Ear
Dir
Ear
Ear
Ear
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Dir
Ear
Ear
Ear
Ear
Dir
Ear
Dir
Dir
Ear
Ear
Ear
Ear
Dir
Dir
Dia. PULLEY
mm grv volt
119 10 12v
126 10 12v
125 6
12v
152 2
24v
119 8
12v
126 10 12v
126 10 12v
119 8
12v
119 8
12v
125 2
12v
119 8
12v
119 8
12v
119 8
12v
125 6
12v
125 6
12v
125 6
12v
125 2
12v
119 8
12v
132 2
12v
132 2
12v
125 6
12v
119 8
12v
119 8
12v
125 2
12v
132 2
12v
132 2
24v
130 6
12v
119 8
12v
119 8
12v
119 6
12v
125 2
12v
132 2
12v
133 2
12v
119 8
12v
119 8
12v
128 6
12v
138 1
24v
132 2
12v
132 2
12v
132 2
12v
125 6
12v
119 8
12v
125 6
12v
119 8
12v
152 2
12v
152 1
24v
138 1
12v
119 8
12v
125 2
12v
119 8
12v
119 8
12v
130 8
24v
132 2
12v
152 2
24v
130 8
12v
132 2
12v
125 6
12v
WIRE
END
T3D
T5D
T5D
T2D
T5D
T5D
T5D
T5D
T5D
T3D,J1
T3D,J1
T5D
T14
T10
T5D
T5D
T5D
T10
T5D
T5D
T5D
T5D
T5D
T5D
T3D,J1
T3D,J1
T13
T1
T3D,J1
T1
T1
T3D,J1
T3D,J1
T3D,J1
T8
T5D,J2
T7
T10
T5D
T5D
T5D
T10
T5D
T5D
T2
T7
T12
T5D
T5D
T5D
T14
T7
T5D
T2
T5D
T5D
T5D
SHAFT
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Spline
OIL
cc’s
300
300
300
300
300
300
300
300
300
200
200
300
300
300
300
300
300
300
300
300
300
300
300
300
200
200
135
200
200
135
135
200
200
200
74
00
300
300
240
300
300
300
300
300
285
300
300
300
300
300
300
300
300
285
300
300
300
242
SANDEN#
NUMBER
4493
4494
4495
4496
4497
4498
4499
4506
4507
4508
4510
4511
4513
4514
4515
4516
4519
4521
4522
4523
4525
4526
4527
4529
4530
4531
4532
4536
4537
4538
4540
4541
4543
4544
4545
4546
4547
4548
4549
4577
4578
4580
4581
4584
4585
4592
4600
4602
46023
4603
46033
4604
4608
4609
4611
4615
4616
AIRSOURCE NUMBERS
COMPR
CLUTCH
5385
5165
5387
5168
call
5137
5323
5122
5320
50403
5317
–
5303
50410
5774
5058
5774
5058
5712
5069
54510
5057
5719
5059
5703
5057
5737
5060
5715
5059
5775
5135
5952
NSS
5291 w/5204
5284 w/5204
5284 w/5204
5290 w/5203
call
5069
5291 w/5203
5290 w/5203
5714
5061
5284 w/5204
5294 w/5201
5290 w/5202
5291 w/5202
54538
5116 (10)
54540
5116 (10)
54541
50414
5396
5178S
5348
5137
54545
–
54546
5164
5409
–
54083
5137
5334S
5164S
54577
–
54578
–
54580
54581
–
54584
–
54585
–
54592
–
54600
–
5772
5121
5772NC
–
5771
5139
5771NC
–
5391
5119
5305
50405
5300
5057D
5302
50404
5395
5137S
5286E
-
HEAD
–
–
–
–
–
–
5632
5625
5625
5625
–
5634
5631
5625
5625
5625
–
5058
5060
5060
5057
5631
5058
5057
5625
5060
–
5057
5058
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5626
–
–
–
–
–
–
5632
5632
–
–
MODEL
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15SHD
5H14HD
5H14
5H14
5H14HD
5H14HD
5H14
5H14
5H14HD
5H14HD
510HD, R12
5H14
5H14
5H14
5H14
5H14
5H14HD
5H14HD
5H14HD
5H14
5H14
5H14HD
5H14HD
7H15HD
7H15HD
7H15HD
SPRHD
7H15HD
7H15E
7H15HD
7H15
7H15HD
SPRHD
SPRHD
SPRHD
7H15E
7H15E
7H15HD
7H15E
7H15HD
7H15SHD
7H15HD
7H15
7H15
7H15
7H15SHD
7H15SHD
7H15SHD
7H15SHD
SPRHD
7H15E
FITTING
HEAD
WV
WV
GV
WJ
SJ
KCA
MD
FL
FL
FL
FL
C
M
FL
FL
FL
QM
M
M
M
C
M
C
C
FL
M
FL
K
K
GH
4802
4418
GH
GWA
KF
GWA
4400
4802
GH
4577
MDA
KF
WV
4018
4018
4545
JD
WH
WH
WJ
WJ
GK
GK
MD
MD
4802
GV
POS
H
H
H
–
H
H
H
V
V
V
V
V
H
V
V
V
H
H
H
H
V
H
V
V
V
H
V
H
H
H
V
V
H
H
H
H
–
V
H
–
–
H
–
V
V
–
V
V
V
–
H
H
H
H
H
V
H
SIZE
Rear o’ring
Rear o’ring
GM metric
Spc’l Pad
Pad
3/4x7/8
1x14
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
1x14
1x14
3/4x7/8
3/4x7/8
3/4x7/8
Rear o’ring
1x14
1x14
1x14
1x14
1x14
1x14
1x14
3/4x7/8
1x14
3/4x7/8
3/4x7/8
3/4x7/8
Pad M10
Pad @ 90°
PAD O-ring
Pad
Rear o’ring
1"1/16x3/4
Rear o’ring
–
Pad @ 90°
Pad
–
1x14
1"1/16x3/4
–
Pad Top
Pad Top
–
3/4x7/8
Pad @ 45°
Pad
Spc’l Pad
Pad
H Pad
Pad M10
1x14
1x14
Pad Top
Pad M10
Mount
Dir
Dir
Ear
Ear
Ear
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Ear
Dia. PULLEY
mm grv volt
130 8
12v
125 6
12v
119 8
12v
119 8
12v
132 2
12v
133 8
12v
152 8
12v
132 2
24v
132 2
24v
125 10 12v
132 2
12v
158 1vg 12v
132 2
12v
119 7
12v
158 1vg 12v
158 1vg 24v
138 1
24v
132 2
24v
119 7
12v
119 6
12v
132 2
12v
125 10 12v
132 2
24v
132 2
12v
122 1
12v
119 7
12v
152 2
24v
132 2
12v
132 2
24v
132 2
12v
132 2
12v
126 12 12v
140 8
12v
119 8
12v
119 8
12v
125 6
12v
120 8
12v
119 8
12v
125 6
12v
126 7
12v
133 6
12v
126 1
24v
119 8
12v
119 8
12v
119 6
12v
119 8
24v
125 6
12v
169 1
12v
–
–
–
132 1
12v
–
–
–
138.5 1
24v
138 1
12v
152 2
12v
152 2
24v
119 8
12v
125 2
12v
WIRE
END
T5D
T5D
T3D,J1
T10
T10
T7
T2
T1
T1
T1
T1
T1
T1
T1
T1
T1
T7
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T5D
T5D
T5D
T5D
T5D
T12D
T5D
T8
T5D
T5D
T5D
n/a
T12
n/a
T5D
n/a
n/a
n/a
T10
–
T10
–
T7
T7
T2
T2
T5D
T3D
SHAFT
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
–
–
Key
–
–
–
–
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
OIL
cc’s
300
300
200
300
300
300
285
210
210
210
210
240
210
210
240
210
240
210
210
210
210
210
210
210
210
210
210
210
210
300
300
300
300
300
270
300
74
300
300
300
300
300
300
300
300
300
270
300
300
300
300
300
300
240
285
300
300
243
COMPRESSORS
COMPRESSORS
SANDEN#
NUMBER
4617
4618
4626
4627
4628
4637
4639
4640
4641
4643
4644
4645
4646
4647
4648
4651
4652
4653
4654
4656
4659
4660
4661
4663
4664
4665
4666
4667
4672
4673
4675
4676
4678
4687
4691
4693
4694
4695
4696
4698
4699
4700
4704
4705
4707
4708
4709
4710
4711
4712
4713
4714
4715
4716
4717
4718
4720
AIRSOURCE NUMBERS
COMPR
CLUTCH
5717
5705
5726
5727
5716
5740
5764
5312
5741
5725
5764
5745
5746
5764
54648
54651
5752
5307
54654
5391
5708
5706
5314
5727
5764
5745
5707
54667
5748
54673
54675
54676
54678
5325
54691
54693
5380
5329
5373
5321
5386
5381
5320
5361
5340
5341
5412
5413
5706
5762
5363
54714
5382
5383
5384
5323
54720
5057D
5149
5064
5066
5065
5179
5064
5134
5068 (5)
5064
5064
5068 (5)
5064A
5064
NSS
–
5132
–
5057D
5119
50409
5137 (9)
5024
5066
5064A
5068 (5)
5068
5137
5137 (9)
5057D
50414
5137
–
5164 (8)
–
5116
5116
5138
5179
5116
5165
50403(8)
5137
5068
5066
5068
5068
5068
5138
–
5116
5165
5116
5122 (10)
5137
HEAD
5632
–
5626
5626
5626
5638C
5626
–
5632
5627
5601
5601
–
5601
–
5626
5627
5626
–
5638C
5601
5638C
5626
5626
5626
5638C
5638C
–
–
–
–
–
–
–
–
5626
5601
–
–
5626
5638C
–
–
–
–
5638G
–
5626
5638G
–
–
–
–
–
–
–
MODEL
7H15SHD
7H15HD
7H15HD
7H15HD
7H15
7H15SHD
7H15HD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
SPRHD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15
7H15HD
7H15
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15HD
7H15E
7H15HD
7H15HD
7H15HD
7H15
7H15HD
7H15HD
7H15HD
7H15SHD
7H15HD
7H15HD
7H15
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15
7H15
7H15
7H15HD
7H15E
FITTING
HEAD
POS
MD
SJA
JD
JD
JD
KC
JD
GK
MD
CB
JDA
JDA
MDA
JDA
YE
GWA
JD
CB
JD
GK
KC
JDA
KC
JD
JD
JD
KC
KC
MDA
KC
4018
GWA
JDA
CBA
GN
SJ
JD
JDA
GQ
JD
JD
KC
SJ
GQ
QC
QC
KG
CB
JD
KG
JDA
SJA
WV
WV
WV
WJ
4347
H
H
V
V
V
H
V
H
H
V
V
V
H
V
V
–
V
V
V
H
H
V
H
V
V
V
H
H
H
H
V
H
V
V
V
–
V
V
V
V
V
H
–
LAT
H
H
H
V
V
H
V
H
H
H
H
V
V
SIZE
1x14
Pad
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
H Pad
1x14
1x14
3/4x7/8
3/4x7/8
1x14
3/4x7/8
Pad Top
–
3/4x7/8
1x14
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
1x14
3/4x7/8
Pad @ 90°
Rear o’ring
3/4x7/8
1x14
Pad @ 90°
–
3/4x7/8
3/4x7/8
Pad @ 90°
3/4x7/8
3/4x7/8
3/4x7/8
Spc’l Pad
3/4x7/8
Rear o’ring
Rear o’ring
3/4x7/8
1x14
3/4x7/8
3/4x7/8
3/4x7/8
Pad
3/4x7/8
3/4x7/8
3/4x7/8
Pad
Pad @ 20°
Mount
Dia.
mm
PULLEY
grv volt
Ear
Ear
Dir
Ear
Dir
Ear
Ear
Ear
Dir
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Ear
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Ear
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Ear
Ear
Ear
Dir
132
119
132
125
119
130
132
152
119
132
132
119
132
132
126
125
125
119
132
138
130
119
138.5
125
132
119
119
119
119
132
126
119
126
125
119
120
132
125
125
133
132
130
132
119
119
125
125
119
119
119
125
132
132
130
132
119
119
2
7
2
2
6
8
2
1
6
2
2
7
2
2
10
6
2
6
2
1
8
8
1
2
2
7
8
8
8
2
12
8
12
6
6
6
2
2
2
8
2
8
2
8
8
2
2
8
8
8
2
1
2
8
2
8
8
12v
12v
12v
12v
12v
12v
12v
24v
12v
12v
12v
12v
12v
12v
24v
24v
24v
12v
12v
24v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
WIRE
END
OIL
SHAFT cc’s
T1
T5D
T4
T4
T1
T12
T3 *
T7
T1
T1
T3D
T3D
T3D
T3D
n/a
T5D
T4
T10
T1
T7
T4
T3D,J1
T12
T1 *
T3D,J1
T3D
T1
T5D
T3D *
T1
T5D
T5D
T3D
T3D
n/a
n/a
T5D
T5D
T5D
T12
T5D
T5D
T10
T5D
T1
T1
T3D
T1
T1
T1
T3D *
n/a
T5D
T5D
T5D
T10D
T5D
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Spline
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
note 2
Key
Key
Key
Key
300
240
300
300
240
270
270
300
240
240
300
300
240
240
240
240
270
240
270
300
270
270
300
135
240
300
240
300
240
270
300
300
300
240
240
240
300
300
300
300
300
300
300
300
135
135
135
135
135
135
300
200
300
300
300
300
300
244
SANDEN#
NUMBER
4726
4730
4731
4731
4733
4734
4735
4736
4737
4738
4739
4739
4740
4741
4742
4743
4744
4745
4746
4747
4752
4753
4754
4756
4757
4759
4761
4762
4763
4764
4765
4766
4767
4768
4769
4775
4776
4777
4778
4779
4780
4781
4785
4792
4793
4795
4796
4800
4802
4803
4804
4805
4806
4808
4810
4813
4815
AIRSOURCE NUMBERS
COMPR
CLUTCH
5313
5120
5770
5174
5362
5164 (7)
5362
5168 (7)
5385
5175
5326
5137
5327
5116
5328
5116
54737
–
54738
5179
5367
5176 (7)
5367
5137 (8)
5363
5163 (7)
5309
5132
5749
5132
5743
5132
5392
5132
5735
50415
5736
5133
5721
5133
5329
5116 (10)
5355
–
5701
–
5330
5168
5387
5168
5365
5176
5345
5168
54762
–
5283 w/5203
5283 w/5204
5283 w/5202
5356
–
5322
5174
5303
50410
5316
5120
54775
–
5331
5176
5384
5167
5382
5167 (2)
5286 w/5202
5726
–
5332
5169**
54785
–
5366
5168 (7)
5347
5164
5304
–
5710
–
5285E
5137
5398
5178S
54803
5164
5399
50412S
5282E
5068
5317
–
5397
5137S
5370
50406
5317
–
5347
5168
HEAD
–
–
–
–
–
–
–
5601
–
–
5638G
5638G
5601
–
5638G
5627
5632
5626
5626
5627
5626
–
–
–
–
–
–
–
–
–
–
–
5632
–
–
–
–
–
–
5626
–
–
–
–
5632
–
–
–
–
–
–
–
–
–
–
–
MODEL
7H15SHD
7H15
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15
7H15HD
7H15SHD
7H15HD
7H15E
SPRHD
7H15HD
SPRHD
7H15E
7H15SHD
SPRHD
7H15HD
7H15SHD
7H15HD
FITTING
HEAD
POS
GK
WH
GSA
GSA
WV
MJA
MDA
JDA
GK
JD
KG
KG
JDA
JD
KG
CB
MD
JD
JD
CB
JD
SJ
WH
CBA
WV
GQ
MDA
JD
CB
MD
KG
SJ
WH
MD
GK
GH
MJA
WV
WV
JD
JD
KC
GF
GQ
GUA
MD
GT
GV
4802
4418
4802
GV
KCA
MDA
WJ
KCA
GWA
H
V
V
V
H
H
H
V
H
V
H
H
V
V
H
V
H
V
V
V
V
H
V
V
H
LAT
H
V
V
H
H
H
V
H
H
H
H
H
H
V
V
H
V
LAT
V
H
V
H
V
V
V
H
H
H
V
H
H
SIZE
H Pad
Pad
3/4x7/8
3/4x7/8
3/4x7/8
1x14
1x14
3/4x7/8
Pad M10
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
1x14
1x14
3/4x7/8
3/4x7/8
1x14
3/4x7/8
Pad
Pad
1x14
3/4x7/8
3/4x7/8
1x14
3/4x7/8
1x14
1x14
3/4x7/8
Pad
Pad @ 45°
1x14
H Pad
Pad
1x14
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
Pad @ 90°
3/4x7/8
PAD 180°
1x14
Pad @ 90°
Pad M10
Pad @ 90°
PAD O-ring
Pad Top
Pad M10
3/4x7/8
1x14
Pad
3/4x7/8
Rear o’ring
Mount
Dia.
mm
Ear
Dir
Dir
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Ear
Dir
Dir
Dir
Dir
Dir
Ear
Ear
Ear
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Ear
Dir
Ear
Dir
Ear
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir
Dir sh
Ear
Dir
Dir
Dir
Dir
Dir
132
119
125
125
130
119
132
132
133
133
119
119
125
125
125
125
125
158
158
158
132
119
130
125
125
119
125
119
119
119
119
119
119
152
132
119
119
132
132
125
132
130
130
125
125
152
119
119
140
125
126
119
133
119
125
132
125
PULLEY
grv volt
8
8
6
6
8
8
2
2
8
8
8
8
2
2
2
2
2
1vg
1vg
1vg
2
8
7
6
6
8
6
8
8
8
8
8
8
8
8
8
8
2
2
2
2
8
7
6
6
8
7
8
8
6
10
8
8
8
6
8
6
24v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
24v
24v
24v
24v
24v
12v
12v
12v
12v
12v
12v
12v
12v
12v
24v
24v
24v
24v
12v
12v
12v
24v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
24v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
WIRE
END
OIL
SHAFT cc’s
T7
T10
T5D
T5D
T5D
T5D
T5D
T5D
T7
T12
T5D
T5D
T5D
T1
T1
T1
T1
T1
T1
T1
T5D
T10
T8
T5D
T5D
T5D
T5D
T1
T1
T1
T1
T10
T14
T2
T7
T6
T5D
T5D
T5D
T4 *
T4
T4 *
T6D
T5D
T5D
T2
T8
T3D
T5D
T5D
T5D *
T1
T7
T5D
T10
T7
T5D
Key
Spline
Spline
Spline
Spline
Key
Key
Key
Key
Key
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Spline
Spline
Spline
Spline
Spline
Spline
Key
Key
Key
Key
Spline
Spline
Key
Key
Spline
Spline
Spline
note 2
Spline
Spline
Spline
Spline
Spline
Key
Key
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Spline
300
240
300
300
300
300
240
300
300
270
300
300
300
175
175
175
175
175
175
175
300
300
300
300
300
300
300
175
175
175
175
300
300
300
300
210
300
300
300
300
300
270
210
300
300
300
240
300
300
300
300
300
300
300
300
300
300
245
COMPRESSORS
COMPRESSORS
Listed in ascended order by Sanden Number (continued).
SANDEN#
NUMBER
AIRSOURCE NUMBERS
COMPR
CLUTCH
HEAD
4816
4818
4819
4820
4821
4822
4823
4825
4840
4846
4850
4860
4862
4864
4866
4868
4870
4872
4874
4875
4877
4881
4883
4885
4890
4891
4892
4893
4894
4895
4896
4897
4979
5072
5073
5077
5407
5415
5424
5427
5706
57093
5725
57303
5746
5747
6627
6629
6630
6631
6632
6634
6642
6655
6656
6664
6665
5348
5176 (7)
5333
5137
5334
5164
5335
5137
5336
5116
5349
5137
5390
5169
54825
–
5318
–
54846
–
5410
–
5286
5138
5287
5132(10)
5282
5137
5283
50408
5295
5133
5296
50415
5289
50411
5284
50407
5292
50400
5293
50401
5294
50404
5339
5164
5371
5177
5382
5116
5387
–
5385
–
5384
5116
5726
5064 (7)
5332
–
5380
50402
54897
5164
54979
–
5786
–
5788
–
55077
–
5973
5058
5912
5069
5920
5057
55427
–
5906
5149
5773NC
–
5920
5057
5930NC
–
5914
–
5975
5059
5774
5058
5737
5060
5412A
5057
5703
5057
56632
5058
5731
5058
56642
5057
5284 w/5204
5289 w/5204
54510
5057
5774
5058
–
–
–
–
–
5601
5638C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5626
–
–
–
–
–
5626
5638C
5626
–
–
5625
5625
–
5621
5621
5621
–
–
–
–
–
–
5621
5625
5625
–
5631
–
5643
–
5060
5069
–
5625
MODEL
7H15HD
7H15
7H15
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15HD
7H15SHD
7H15SHD
7H15SHD
7H15SHD
7H15HD
7H15HD
7H15HD
7H15
7H15
7H15HD
7H15
7H15
7H15
7H15HD
TRS105
5H09HD
5H09HD
5H09HD
508HD, R12
508, R12
508, R12
508HD, R12
508HD, R12
508HD, R12
508HD, R12
508HD, R12
7H15HD
510HD, R12
5H14
5H14HD
5H14
5H14
5H14HD
5H14HD
5H14HD
5H14
5H14HD
5H14HD
5H14HD
FITTING
HEAD
POS
GWA
GH
GH
GH
GH
JDA
KC
GRA
GK
GF
4850
GV
GV
GV
GV
GV
GV
GV
GV
GV
GV
GV
JD
MDA
WV
WV
WV
WV
JD
KC
JD
KCA
BT-H
FL
FL
K
FG
FG
FG
FG
QH
FQ
B
WF
FG
FG
FL
FL
K
M
M
K
C
M
FL
FL
FL
H
H
H
H
H
V
H
V
H
–
V
H
H
H
H
H
H
H
H
H
H
H
V
H
H
H
H
H
V
H
V
H
T
V
V
H
V
V
V
V
H
V
V
V
V
V
V
V
H
H
H
H
V
H
V
V
V
SIZE
o’ring rear
H Pad
H Pad
Pad
Pad
3/4x7/8
3/4x7/8
Pad
H Pad
–
Pad @ 90°
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
Pad M10
3/4x7/8
1x14
Rear o’ring
3/4x7/8
3/4x7/8
Rear o’ring
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
Body Port
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
Pad
3/4x7/8
3/4x7/8
Pad
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
3/4x7/8
1x14
1x14
3/4x7/8
1x14
1x14
3/4x7/8
3/4x7/8
3/4x7/8
Mount
Dia.
mm
Dir
Dir
Dir
Ear
Ear
Dir
Dir
–
Dir
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Dir
Dir
Dir sh
Ear
Dir
Ear
Ear
Dir
TR
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
119
119
125
119
132
119
130
130
152
130
119
125
125
119
119
158
158
126
133
138
138
152
125
130
132
132
130
132
132
130
125
125
95
125
125
125
132
125
132
152
119
–
132
–
122
158
132
119
132
132
132
132
132
119
125
132
132
PULLEY
grv volt
8
8
6
8
2
8
8
6
8
7
8
2
2
8
8
1vg
1vg
10
8
1
1
2
6
8
2
6
8
2
2
8
2
6
7
2
2
2
2
10
2
1
7
–
2
–
1
1vg
2
7
2
2
2
2
2
7
10
2
2
12v
12v
12v
12v
12v
12v
12v
12v
24v
12v
12v
12v
24v
12v
24v
12v
24v
12v
12v
12v
24v
24v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
12v
24v
12v
24v
12v
12v
24v
12v
–
12v
–
12v
12v
24v
12v
12v
12v
24v
24v
12v
12v
12v
12v
24v
WIRE
END
OIL
SHAFT cc’s
T5D
T5D
T5D
T5D
T5D
T5D
T4
T6
T7
T6
T8
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T3D,J1
T5D *
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T5D
T6
T1
T1
T1
n/a
T1
T3 *
T1
T5D
–
T1
–
T1
T1
T1
T1
T1 *
T1
T1
T1
T15
T1
T1
T1
T1
Key
Key
Key
Key
Key
Key
Spline
Spline
Key
Spline
Spline
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
–
–
–
–
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
200
300
300
300
300
300
300
300
300
300
240
200
200
200
200
200
200
200
200
200
200
200
300
300
300
300
300
300
300
300
300
300
240
100
100
100
175
175
270
310
175
310
285
310
210
210
210
175
210
175
175
175
175
210
175
210
210
246
SANDEN#
NUMBER
6667
6670
6671
6672
6673
6674
6675
6676
6677
6678
6679
6680
6681
6697
7170
7176
7304
7344
7351
7360
7361
7803
7804
7819
7822
7864
8017
8025
8045
8053
8069
8088
8090
8103
8104
8105
8107
8108
8109
8112
8147
8148
8152
8387
8390
8399
8901
9026
9056
9077
9103
9105
9112
9114
9119
9120
9122
AIRSOURCE NUMBERS
COMPR
CLUTCH
5291 w/5203
56670
5069
5719
5059
5775
5135
5715
5059
5714
5061
5284 w/5204
5412A
5057
5290 w/5203
5290 w/5203
5294 w/5201
5291 w/5202
56681
56697
–
57170
–
57176
–
57304
–
57344
–
57351
–
57360
–
57361
–
5704
5138
5770
5122
5702
5066
5748
5068
5284 w/5202
5287
–
5284 w/5202
58045
–
58053
58069
–
5308
–
58090
5706
5068
5764
5064
5716
5065
5391
5119
5305
50405
5312
5134
58112
–
58147
–
58148
–
58152
–
58387
–
5990
5057
5999
5058
58901
–
5926
5057
5956
–
59077
–
5903
5057
5905
5058
59112
5059
5925
5057
5919
5059
5920
5057
5922
5135
HEAD
5058
–
5634
5625
5625
5625
5060
–
5057
5057
5058
–
–
–
–
–
–
–
–
–
–
5632
5632
5065
–
5065
–
–
–
5626
5626
5626
–
–
–
–
–
–
–
–
–
–
–
5631
–
–
–
–
–
5634
5634
5621
5634
MODEL
5H14
5H14HD
5H14HD
5H14HD
5H14HD
5H14HD
5H14
5H14HD
5H14
5H14
5H14
5H14
SD5H14
5H14SHD
7B10
7B10
7H13
7H13
7H13
7H13
7H13
7H15E
7H15HD
7H15
7H15E
7H15
7H15
7H15
7H15E
7H15SHD
7H15E
7H15SHD
7H15HD
7H15
7H15HD
7H15E
7H15SHD
7H15SHD
7H15SHD
7H15E
7H15
7H15
7H15SHD
508, R12
508, R12
508, R12
7H13
508HD, R12
505, R12
505, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
FITTING
HEAD
POS
C
M
C
FL
FL
FL
M
K
C
C
FL
K
FL
FL
–
–
JE
WM
WM
WL
WL
SJA
WH
MD
MD
–
–
–
WZ
JE
FZ
QC
MD
JD
JD
JD
GK
GK
GK
WZ
QC
WV
WZ
B
B
B
KG
M
E
E
B
B
B
C
C
FG
C
V
H
V
V
V
V
H
H
V
V
V
H
V
V
–
–
V
–
–
–
–
H
V
H
H
–
–
–
H
V
V
H
H
V
V
V
H
H
H
H
–
–
H
V
V
V
H
H
V
V
V
V
V
V
V
V
V
SIZE
1x14
1x14
1x14
3/4x7/8
3/4x7/8
3/4x7/8
1x14
3/4x7/8
1x14
1x14
3/4x7/8
3/4x7/8
3/4x7/8
–
–
3/4x7/8
–
–
–
–
Pad
Pad @ 45°
1x14
1x14
–
–
–
Rear o’ring
3/4x7/8
3/4x7/8
Rear o’ring
3/4x7/8
3/4x7/8
3/4x7/8
H Pad
3/4x7/8
H Pad
Rear o’ring
–
–
Rear o’ring
Flare
Flare
Flare
3/4x7/8
1x14
FLARE
FLARE
Flare
Flare
Flare
1x14
1x14
3/4x7/8
1x14
Mount
Dia
mm
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Dir
Dir
–
Ear
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Dir
Ear
Ear
Dir
Ear
Ear
Ear
Dir
Dir
Dir
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
Ear
132
119
158
158
158
126
119
132
132
132
152
132
152
119
115
112
119
125
146
146
125
125
119
125
119
119
–
119
132
132
132
140
119
119
132
119
138.5
138
152
130
112
112
132
152
132
132
119
132
125
125
132
132
152
132
158
132
158
PULLEY
grv volt
2
24v
10 12v
1vg 12v
1vg 24v
1vg 12v
1 oh 12v
6
12v
2
12v
2
12v
2
12v
2
24v
2
24v
1
12v
8
24v
2
12v
6
12v
6
12v
1
24v
1
24v
1
24v
1
24v
2
12v
8
12v
2
12v
8
12v
6
12v
–
–
6
12v
2
24v
2
24v
2
24v
2
12v
8
24v
8
12v
2
12v
6
12v
1
24v
1
12v
1
24v
8
24v
4
12v
4
12v
2
24v
2
12v
2
12v
2
24v
8
12v
2
12v
2
12v
2
24v
2
12v
2
24v
1
12v
2
12v
1vg 12v
2
12v
1vg 24v
WIRE
END
OIL
SHAFT cc’s
T1
T1
T1
T1
T1
T1
T1
T1 *
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T5D
T10
T1
T1
T1
T1
T1
T16
T16
T16
T15
n/a
T1
T3D
T1
T7
T7
T7
T16
T15
T9
T16
T1
T1
T1
n/a
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
–
–
–
–
–
–
–
Key
Key
Key
–
Key
Key
Key
–
–
–
–
–
Key
Key
Key
Key
Key
Key
–
–
–
–
Key
Key
Key
–
Key
–
–
Key
Key
Key
Key
Key
Key
Key
210
175
240
210
240
210
210
210
210
210
210
210
210
175
100
100
135
175
135
135
135
270
300
150
240
135
135
135
240
240
240
190
200
135
240
240
300
300
300
240
200
200
240
175
175
175
135
207
100
100
135
135
135
135
135
175
135
247
COMPRESSORS
COMPRESSORS
SANDEN#
NUMBER
9285
9513
9514
9515
9537
9548
9563
9570
9583
9592
95943
9669
9674
9675
9676
9680
9684
9689
9694
194696
194815
AIRSOURCE
COMPR
5985
5912
5914
5727
5937
5989
5989
59570
5914
5992
5995NC
5989
5974
5975
5976
5919
5952
5989
5920
5373
5347
NUMBERS
CLUTCH
5057
5069
5148
5057
5060
5057
5057
5060
5148
–
5148
5057
5058
5059
5135
5059
–
5057
5057
5138
5168
HEAD
5621
–
5621
5621
5621
–
–
–
5621
–
–
–
5621
5621
5621
5634
–
–
–
–
MODEL
508, R12
508, R12
508HD, R12
508HD, R12
508, R12
510HD, R12
508HD, R12
508, R12
508HD, R12
508HD, R12
508, R12
508HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
510HD, R12
7H15
7H15HD
FITTING
HEAD
FG
B
FG
FG
FG
QH
QH
M
FG
M
FQ
QH
FG
FG
FG
C
QM
QH
FG
–
GWA
POS
V
V
V
V
V
H
H
H
V
H
–
H
V
V
V
V
H
H
V
–
H
SIZE
Mount
3/4x7/8
Ear
3/4x7/8
Ear
3/4x7/8
Ear
3/4x7/8
Ear
3/4x7/8
Ear
Pad
Ear
H Pad
Ear
1x14
Ear
3/4x7/8
Ear
1x14
Ear
–
Ear
Pad
Ear
3/4x7/8
Ear
3/4x7/8
Ear
3/4x7/8
Ear
1x14
Ear
GM Pad
Ear
Rear o’ring Ear
3/4x7/8
Ear
–
–
Rear o’ring Dir
Notes:
Abbreviations:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
NSS
Dir
Dir sh
PRV
Information available at current time
4778 splined (4777-9931 clutch), 4715 keyed (4694-9931 clutch)
4626 keyed (4626-9931 clutch), 4780 splined (4780-9931 clutch)
OE version 2wire Ford connector, Aftermarket is 1wire bullet
Use 8 groove clutch (5137)
Universal GM Pad used with manifold
Splined type clutch only (check OE clutch)
Keyed type clutch only (check OE clutch)
OE has diode
OE has diode, Reuse Harness
=
=
=
=
Dia. PULLEY
mm grv volt
132 2
12v
125 10 12v
126 1 oh 12v
132 2
12v
119 7
12v
132 2
12v
132 2
12v
119 7
12v
122 1 oh 12v
126 1 oh 12v
–
–
12v
132 2
12v
132 2
24v
158 1vg 12v
158 1vg 24v
158 1vg 12v
138 1
24v
132 2
12v
132 2
12v
–
–
–
125 6
12v
WIRE
END
T1
T1
T1
T1
T1
T1
T1
T1
T1
T3
–
T1
T1
T1
T1
T3 *
T7
T1
T3 *
T5D
T5D
OIL
SHAFT cc’s
Key
175
Key
175
Key
207
Key
207
Key
175
Key
210
Key
207
Key
175
Key
310
Key
207
Key
310
Key
240
Key
135
Key
135
Key
135
Key
240
Key
240
Key
135
Key
240
Key
200
Splne 200
Not Sold Separately
Direct Long
Direct Short
Pressure Relief Valve
( – ) DESIGNATES CALL FOR AVAILABILITY
* Wire End Types see Wire End Type Chart on page 239.
The AirSource compressor number listed may have a different style connector than illustration provides.
May require reuse of original connector, or use of jumper wire.
TECH
TIP
248
Tech Tip: When replacing an R12 compressor with and R134a type you will need to do the following:
Since ALL R134a compressors do not contain service (schrader) ports needed to hook up manifold
gauge hoses for servicing and charging, the additional purchase of R134a service ports are required.
(The ports required are compressor specific, relating to the style of head where the A/C hoses are
attached). Once the head style is determined, the ports simply are attached to the compressor fittings.
Super Heavy Duty Compressor (SHDC)
New Design Features
• New Heavy Duty Design for greater durability and longer service life, twice as long as
Standard Models
• Original Equipment on later model, class 8 vehicles: Freightliner, Peterbilt, Volvo and Mack
• Doubles the number of life clutch cycles (1 million)
• Increased Friction Surface Diameter on Clutch Rotor
• Same Wobble Plate design and performance as current SD7 compressors
• Larger Face with a friction lined clutch rotor for better engagement
• Rubber clutch armature replaces and eliminates leaf spring armature
• New Heavy Duty Extra Pure (EP) Steel Bearing in Clutch Rotor
• Increased internal oil flow passages to increase oil flow to lip seal
COMPRESSORS
• Improved Over-Molded Lip Seal, increases the ability to seal when shaft “waggles” during
compressor operation
• Improved rear thrust bearing race
• Improved Rod Swage Joint Quality with special alumite coating
• Thermal Fuse added to coil for disengagement of clutch pulley
• Prevents clutch from locking up and throwing accessory drive belt
In most applications, New Super Heavy Duty Compressors will replace the
standard models. Check clutch clearance before installing on vehicle.
Standard Models
5333
5334
5362
5363
5365
5366
Super Heavy Duty Models
5333S
5334S
5362S
5363S
5365S
5366S
249
COMPRESSORS — SANDEN STYLE
Super Heavy Duty Compressor (SHDC)
Thermal Fuse Design
Thermal Fuse in Clutch Coil
• Placed inside the clutch coil to sensor high heat temperature.
• Function: As the fuse senses extreme heat from clutch slippage, the thermal fuse breaks
open. With the open fuse, it will not allow the electrical current to flow to the clutch coil. This
function disengages the clutch armature from the clutch pulley and allows the clutch pulley to
spin freely acting as an idler pulley.
• The thermal fuse prevents the loss of the accessory drive belt.
• The thermal fuse can’t be reset or replaced after breaking open. The compressor must be
replaced and normal maintenance to the system must be performed.
• Position of Thermal Fuse is located in the Clutch Coil.
COMPRESSORS
Thermal Fuse
SD7E Enhanced Version Super Duty Compressors
• Wobble Plate design.
• HD Bus, Ag, & Off-Road Applications.
• Drop-in replacement for Seltec TM21 compressor.
• High-flow version of SD7. Comparable to 210cc performance.
• Same external dimensions as current SD7 compressor.
• Direct Mount. Various clutch pulley & Rear head configurations.
• Redesigned suction valve & increased ID Suction & Discharge ports.
• Conforms to existing dual compressor mounts.
• Approved for school bus usage nationwide.
250
Listed in ascending order by part number. See ”Wire End Types” chart on page 239.
T3D,J1
5282A
200cc
Model
Mount
FLX w/fitting Ear
Volt
Head
12
GV
R134a
Clutch
8gr 119mm
Sanden#
4460
T5D,J2
R134a
Mount Clutch
Ear
2gr 132mm
Head Sanden#
UK
4318
T2
5304
Model
7H15SHD
Volt
24
Model
7H15SHD
Volt
12
200cc
Model
Mount
FLX w/fitting Ear
Volt
Head
12
GV
R134a
Clutch
2gr 132mm
Sanden#
4457
5300
Model
7H15SHD
Volt
12
285cc
Mount
Direct
Head
MD
R134a
Clutch
8gr 152mm
Sanden#
4795/4300
5305
Model
7H15SHD
Volt
12
285cc
Mount
Ear
Head
MD
R134a
Clutch
2gr 152mm
Sanden#
4609/4478
R134a
Clutch
2gr 140mm
Sanden#
8088
5309
Model
7H15HD
Volt
24
5290C
200cc
Model
Mount
FLX w/fitting Ear
Volt
Head
12
GV
R134a
Clutch
2gr 133mm
Sanden#
4458
5302
Model
7H15SHD
Volt
24
300cc
Mount
Ear
Head
GK
R134a
Clutch
1gr 138mm
Sanden#
4608/8108
5306
Model
7H15E
Volt
12
285cc
Mount
Ear
Head
MD
R134a
Clutch
2 gr 152mm
Sanden#
4611/4489
R134a
Clutch
2gr 125mm
Sanden#
4741
5312
Model
7H15SHD
Volt
24
Model
7H15HD
Volt
12
R134a
Mount Clutch
Ear
6gr 128mm
Head Sanden#
UK
4467
5303
Model
7H15SHD
Volt
12
285cc
Mount
Direct
Head
MD
Clutch
8gr 152mm
Sanden#
4768/4499
240cc
Mount
Ear
Head
CB
Clutch
6gr 119mm
Sanden#
4653
300cc
Mount
Ear
Head
GK
Clutch
8gr 130mm
Sanden#
4726/4487
R134a
T10
300cc
Mount
Direct
Head
GV
R134a
Clutch
10gr 119mm
Sanden#
4034
T7
175cc
Mount
Ear
Head
JD
5298
T2
T5D
T1
190cc
Mount
Ear
Head
QC
T5D,J2
T2
T7
T15
5308
5290A
T2
5299
Model
7H15HD
Volt
12
T3D,J1
5307
Model
7H15
Volt
12
R134a
T7
300cc
Mount
Ear
Head
GK
R134a
Clutch
1gr 152mm
Sanden#
4640 /8109
5313
Model
7H15SHD
Volt
24
R134a
251
COMPRESSORS
T3D,J1
Listed in ascending order by part number. See “Wire End Types” chart on page 239.
T12
5314
Model
7H15SHD
Volt
12
T7
300cc
R134a 5316
Mnt
Clutch
Model
Ear
1gr 138mm
7H15SHD
Head Sanden#
Volt
KC
4661/4480
24
COMPRESSORS
T10
300cc
Model
Mount
7H15HD Ear
Volt
Head
12
SJ
R134a
Clutch
2gr 132mm
Sanden#
4704/4497
T3D
Model
7H15HD
Volt
12
Model
7H15HD
Volt
12
252
R134a
Clutch
8gr 130mm
Sanden#
4769/4301
5321
300cc
Model
Mount
7H15SHD Direct
Volt
Head
12
JD
R134a
Clutch
8gr 133mm
O.E.M.#
4698
T5D
240cc
Mount
Direct
Head
CBA
R134a
Clutch
6gr 125mm
Sanden#
4687
T5D
5329
300cc
Mount
Direct
Head
GK
T12
5320
5325
T7
5326
Model
7H15HD
Volt
12
300cc
Mount
Ear
Head
MDA
R134a
Clutch
8gr 119mm
Sanden#
4734/4477
T5D
300cc
Mount
Direct
Head
JD
R134a
Clutch
2gr 132mm
Sanden#
4752/4491
5330
Model
7H15HD
Volt
12
300cc
300cc
R134a 5318
Model
Mount Clutch
Model
Mount
7H15SHD Direct 8gr 133mm
7H15SHD Direct
Volt
Head
Sanden#
Volt
Head
12
KCA 4813/4498/4806 24
GK
5317
T14
T10D
5322
300cc
R134a
Model
Mount Clutch
7H15HD Direct 8gr 119mm
Volt
Head
Sanden#
12
WH
4767/4303/4486
5323
T5D
T5D
5327
Model
7H15HD
Volt
12
T5D
300cc
Mount
Direct
Head
CBA
R134a
Clutch
6gr 125mm
Sanden#
4756/4475
T7
5331
Model
7H15
Volt
12
240cc
Mount
Ear
Head
MDA
R134a
Clutch
2gr 132mm
Sanden#
4735/4471
R134a
Clutch
8gr 152mm
Sanden#
4840/4302
300cc
R134a
Model
Mount Clutch
7H15HD Ear
8gr 119mm
Volt
Head
Sanden#
12
WJ
4305/4496/4718
5328
300cc
Model
Mount
7H15HD Ear
Volt
Head
12
JDA
R134a
Clutch
2gr 132mm
Sanden#
4736/4488
T5D
300cc
R134a 5333
Mount
Clutch
Model
Direct
8gr 119mm
7H15HD
Head
Sanden#
Volt
MDA 4776/4482/4421 12
300cc
Mount
Direct
Head
GH
R134a
Clutch
8gr 119mm
Sanden#
4818/4485
SANDEN STYLE — COMPRESSORS
5333S
Model
SPRHD
Volt
12
T5D
300cc
Mount
Direct
Head
GH
R134a
Clutch
8gr 119mm
Sanden#
4075/4352
T5D
5336
Model
7H15HD
Volt
12
Model
7H15HD
Volt
12
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
GH
R134a
Clutch
6gr 125mm
Sanden#
4819/4473
T5D
300cc
Mount
Ear
Head
GH
R134a
Clutch
2gr 132mm
Sanden#
4821/4472
T5D
5345
5334
T5D
5339
Model
7H15HD
Volt
12
R134a
Clutch
6gr 125mm
Sanden#
4761/4492
T5D
5349
300cc
Model
Mount
7H15HD Direct
Volt
Head
12
JDA
R134a
Clutch
8gr 119mm
Sanden#
4822
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
GH
R134a
Clutch
6gr 125mm
Sanden#
4076/4549
T1
300cc
Mount
Direct
Head
JD
R134a
Clutch
6gr 125mm
Sanden#
4883/4092
T5D
300cc
Mount
Direct
Head
MDA
5334S
T5D
5340
Model
7H15HD
Volt
12
5335
Model
7H15HD
Volt
12
135cc
Mount
Ear
Head
QC
R134a
Clutch
8gr 119mm
Sanden#
4707
T5D
5341
Model
7H15HD
Volt
12
135cc
Mount
Ear
Head
QC
Clutch
2gr 125mm
Sanden#
4708
200cc
Mount
Direct
Head
GWA
Clutch
8gr 119mm
Sanden#
4816/4544
300cc
Mount
Ear
Head
GQ
Clutch
8gr 119mm
Sanden#
4705
R134a
R134a
T5D
200cc
R134a 5347S
R134a
Model
Mount Clutch
Model
Mount Clutch
SPRHD Direct 6gr 125mm
Volt
Head
Sanden#
Volt
Head
Sanden#
12
GWA
4546
12
GWA
4815/4793
5348
T10
T10
T5D
5355
5356
Model
7H15
Volt
12
Clutch
8 gr 119mm
Sanden#
4820
T1
5347
300cc
R134a
Model
Mount Clutch
7H15HD Ear
8gr 119mm
Volt
Head Sanden#
12
SJ
4753
300cc
Mount
Ear
Head
GH
300cc
Mount
Direct
Head
SJ
R134a
Clutch
8gr 119mm
Sanden#
4766
Model
7H15E
Volt
12
5361
Model
7H15HD
Volt
12
R134a
R134a
253
COMPRESSORS
T5D
T5D
5362
Model
7H15E
Volt
12
T5D
200cc
Mount
Direct
Head
GSA
R134a
Clutch
6gr 125mm
Sanden#
4731/4424
COMPRESSORS
T5D
5365
Model
7H15E
Volt
12
Model
7H15HD
Volt
12
200cc
Mount
Direct
Head
GQ
R134a
Clutch
8gr 119mm
Sanden#
4759/4042
Model
7H15HD
Volt
12
254
300cc
Mount
Direct
Head
GSA
R134a
Clutch
6gr 125mm
Sanden#
4376
5365S
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
GQ
R134a
Clutch
8gr 119mm
Sanden#
4077/4368
T10
300cc
Mount
Ear
Head
KG
R134a
Clutch
8gr 119mm
Sanden#
4739
T5D
5380
Model
SPRHD
Volt
12
T5D
T5D
5367
5362S
T5D
5370
Model
7H15HD
Volt
12
R134a
Clutch
2gr 132mm
Sanden#
4694
5381
Model
7H15HD
Volt
12
300cc
R134a
Model
Mount Clutch
7H15HD Ear
2gr 125mm
Volt
Head
Sanden#
12
JDA 4740/4713/4484
5363S
T5D
T5D
5363
5366
Model
7H15E
Volt
12
200cc
Mount
Direct
Head
GQ
R134a
Clutch
6gr 125mm
Sanden#
4792/4040
T5D
300cc
Mount
Direct
Head
WJ
R134a
Clutch
6gr 125mm
Sanden#
4810/4304
T5D
300cc
Mount
Ear
Head
JD
T5D
300cc
Mount
Ear
Head
KC
R134a
Clutch
8gr 130mm
Sanden#
4700
5371
Model
7H15HD
Volt
12
Model
SPRHD
Volt
12
5366S
Model
SPRHD
Volt
12
300cc
Mount
Ear
Head
JDA
R134a
Clutch
2gr 125mm
Sanden#
4392/4393
300cc
R134a
Mount Clutch
Direct 6gr 125mm
Head Sanden#
GQ
4080/4377
T5D
300cc
Mount
Direct
Head
MDA
R134a
Clutch
8gr 130mm
Sanden#
4885
5373
Model
7H15HD
Volt
12
T5D
T5D
5382
5383
300cc
R134a
Model Mount
Clutch
7H15HD Direct
2gr 132mm
Volt
Head
Sanden#
12
WV 4715/4778/4890
Model
7H15HD
Volt
12
300cc
Mount
Ear
Head
GQ
Clutch7H15
2gr 125mm
Sanden#
4426/4696
300cc
Mount
Ear
Head
WV
Clutch
8gr 130mm
Sanden#
4490/4716
R134a
R134a
T5D
5384
300cc
R134a
Model
Mount Clutch
7H15HD Ear
2gr 132mm
Volt
Head
Sanden#
12
WV 4717/4777/4893
5385
T5D
T5D
5387
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
WV
R134a
Clutch
6gr 125mm
Sanden#
4494/4757
T1
5392
Model
7H15HD
Volt
24
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct
8gr 130mm
Head
Sanden#
WV 4493/4733/4892
175cc
Mount
Ear
Head
MD
R134a
Clutch
2gr 125mm
Sanden#
4744/4521
5387S
300cc
Model Mount
7H15SHDC
Volt
Head
12
WV
5393
Model
7H15HD
Volt
12
R134a
Clutch
6gr 125mm
Sanden#
4285
R134a
Clutch
8gr 140mm
Sanden#
4082/4543
5397
Model
SPRHD
Volt
12
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
WV
R134a
Clutch
8gr 130mm
Sanden#
4286
5390
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
4418
R134a
Clutch
8gr 119mm
Sanden#
4418
5394
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
KC
R134a
Clutch
8gr 130mm
Sanden#
4823
R134a
Clutch
8gr 119mm
Sanden#
4084/4808
5398
Model
SPRHD
Volt
12
300cc
R134a
Model
Mount Clutch
7H15HD Direct
2gr 132mm
Volt
Head
Sanden#
12
JD
4699
5391
300cc
R134a
Model
Mount Clutch
7H15SHD Ear
1gr 138mm
Volt
Head
Sanden#
24
GK 4468/4604 /8107
T5D
300cc
Mount
Direct
Head
KCA
R134a
Clutch
2gr 132mm
Sanden#
4306/4428
T5D
300cc
Mount
Direct
Head
MDA
5386
T7
T5D
T5D
300cc
Mount
Direct
Head
GH
5385S
T5D
T4
T5D
T5D
5396
Model
7H15HD
Volt
12
T5D
5395
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
4802
Clutch
8gr 119mm
Sanden#
4314/4615
300cc
Mount
Direct
Head
4802
Clutch
10gr 126mm
Sanden#
4804
R134a
T5D
300cc
Mount
Direct
Head
4802
R134a
Clutch
8gr 140mm
Sanden#
4802
5399
Model
SPRHD
Volt
12
R134a
255
COMPRESSORS
T5D
T5D
5400
Model
7H15E
Volt
12
T5D
COMPRESSORS
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
4347
R134a
Clutch
10gr 119mm
Sanden#
4347
Model
7H15HD
Volt
12
5402
Model
SPRHD
Volt
12
240cc
Mount
Direct
Head
GQ
R134a
Clutch
12gr 126mm
Sanden#
4078/4370
T8
300cc
Mount
Direct
Head
GSA
R134a
Clutch
8gr 119mm
Sanden#
4398
T3D
5412A
T5D
Sealed Super
Heavy Duty
T5D
5406
T5D
5409
Model
7H15HD
Volt
12
R134a
Clutch
2gr132mm
Sanden#
4272
T8
5413
Model
7H15HD
Volt
12
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
WJ
R134a
Clutch
8gr 119mm
Sanden#
4307
T8
R134a
Clutch
8gr 119mm
Sanden#
4342/4850
T8
135cc
Mount
Ear
Head
CB
R134a
Clutch
8gr 119mm
Sanden#
4710
T1
5429
Model
7H15
Volt
12
5404
300cc
R134a
Model
Mount Clutch
SSPRHD
Direct 8gr 180mm
Volt
Head Sanden#
12
WV
4326
T3D
240cc
74cc
R134a 5410
Model
Mount
Mount Clutch
7H15HD Direct
Direct 8gr 119mm
Volt
Head
Head Sanden#
12
4465/4400/4547
T1
200cc
Mount
Ear
Head
KG
5403
5412
Model
7H15HD
Volt
12
135cc
Mount
Ear
Head
KG
R134a
Clutch
2gr 125mm
Sanden#
4709
T8
74cc
Mount
Direct
Head
4809
R134a
Clutch
6gr 122mm
Sanden#
4061
5700
Model
7H15
Volt
12
74cc
Mount
Direct
Head
GT
R134a
Clutch
7gr 119mm
Sanden#
4396
T1
A-B
Distance
Diameter
5701
240cc
Model
Mount
7H15HD Direct
Volt
Head
12
SJA
256
R134a
Clutch
7gr 130mm
Sanden#
4397/4754
5702
Model
7H15
Volt
12
150cc
Mount
Ear
Head
MD
R134a
Clutch
2gr 125mm
Sanden#
7819
5703
Model
5H14
Volt
12
175cc
Mount
Ear
Head
M
R134a
Groove
Width
Clutch
2gr 132mm
Sanden#
4513 /6631
5704
Model
7H15E
Volt
12
T5D
270cc
Mount
Ear
Head
SJA
R134a
Clutch
2gr 125mm
Sanden#
7803
T5D
5707S
Model
SPRHD
Volt
12
5705
Model
7H15HD
Volt
12
T1
240cc
Mount
Ear
Head
SJA
R134a
Clutch
7gr 119mm
Sanden#
4618
T4
300cc
Mount
Direct
Head
KCA
R134a
Clutch
8gr 119mm
Sanden#
4391
T1
5708
Model
7H15HD
Volt
12
270cc
Mount
Ear
Head
KC
R134a
Clutch
8gr 130mm
Sanden#
4659
T1
T1
5706
135cc
R134a
5706E .. Enhanced Version
5707
Model
Mount Clutch
7H15HD Ear
8gr 119mm
Volt Head
Sanden#
12 JDA/JD 4281/4660/4711
Model
7H15HD
Volt
12
T1
T8
5709
Model
7H15HD
Volt
12
135cc
Mount
Ear
Head
JD
R134a
Clutch
2gr 125mm
Sanden#
4663
T1
5710
Model
7H15HD
Volt
12
240cc
Mount
Direct
Head
KC
Clutch
8gr 119mm
Sanden#
4666/4667
240cc
Mount
Direct
Head
GT
Clutch
7gr 119mm
Sanden#
4362
R134a
R134a
FORD - FF clutch
90mm
78mm
5712
Model
5H14
Volt
12
210cc
R134a
Mount Clutch
Ear
10gr 125mm
Head Sanden#
FL
4508/6656
T1
5717
Model
7H15SHD
Volt
12
5714
Model
5H14HD
Volt
12
T1
300cc
Mount
Ear
Head
MD
R134a
Clutch
2gr 132mm
Sanden#
4617
5719
Model
5H14HD
Volt
12
210cc
Mount
Ear
Head
FL
R134a
Clutch
1 OH 126mm
Sanden#
4530/6674
240cc
R134a 5716
240cc
R134a
5715
Model
Mount Clutch
Model
Mount Clutch
5H14HD Ear
1var 158mm 7H15E Direct
6gr 119mm
Volt
Head
Sanden#
Volt
Head Sanden#
12
FL 4515/6673/8114
12
JD
4628/8105
T1
240cc
R134a 5721
Model
Mount Clutch
Ear
1var 158mm 7H15HD
Volt
Head Sanden#
12
C
4511/6671
T1
175cc
Mount
Ear
Head
CB
R134a
Clutch
1var 158mm
Sanden#
4747
5725
Model
7H15HD
Volt
12
240cc
Mount
Ear
Head
CB
R134a
Clutch
2gr 132mm
Sanden#
4643
257
COMPRESSORS
T5D
T4
5726
Model
7H15HD
Volt
12
T4
300cc
Mount
Direct
Head
JD
R134a
Clutch
2gr 132mm
Sanden#
4626/4780
COMPRESSORS
T1
5735
Model
7H15HD
Volt
24
Model
7H15HD
Volt
12
Model
7H15HD
Volt
12
300cc
Mount
Ear
Head
JD
R134a
Clutch
2gr 125mm
Sanden#
4627/4896
T1
175cc
Mount
Ear
Head
JD
R134a
Clutch
1var 158mm
Sanden#
4745
T1
5741
5727
T1
5736
Model
7H15HD
Volt
12
R134a
Clutch
6gr 119mm
Sanden#
4641
T1
5743
Model
7H15HD
Volt
24
Model
5H14
Volt
12
210cc
Mount
Ear
Head
KG
R134a
Clutch
2gr 132mm
Sanden#
4536/6676
T1
175cc
Mount
Ear
Head
JD
R134a
Clutch
1var 158mm
Sanden#
4746
T1
240cc
Mount
Direct
Head
MD
5730
T1
5737
Model
5H14HD
Volt
12
R134a
Clutch
2gr 125mm
Sanden#
4743
T1
5745
Model
7H15HD
Volt
12
Model
5H14HD
Volt
24
175cc
Mount
Ear
Head
KG
Clutch
2gr 132mm
Sanden#
4537/6634
270cc
Mount
Ear
Head
KC
Clutch
8gr 130mm
Sanden#
4637
240cc
Mount
Ear
Head
MDA
Clutch
2gr 132mm
Sanden#
4646
R134a
T12
175cc
Mount
Ear
Head
FL
R134a
Clutch
7gr 119mm
Sanden#
4514/6629
T3D
175cc
Mount
Ear
Head
CB
5731
5740
Model
7H15SHD
Volt
12
R134a
T3D
300cc
Mount
Ear
Head
JDA
R134a
Clutch
7gr 119mm
Sanden#
4645/4665
5746
Model
7H15HD
Volt
12
R134a
T3D
A-B
Distance
Diameter
5748
Model
7H15E
Volt
12
258
240cc
Mount
Ear
Head
MD
R134a
Clutch
8gr 119mm
Sanden#
7822/4672
5749
Model
7H15HD
Volt
24
175cc
Mount
Ear
Head
KG
R134a
Clutch
2gr 125mm
Sanden#
4742
5749A
Model
7H15HD
Volt
24
200cc
Mount
Ear
Head
KG
R134a
Groove
Width
Clutch
2gr 132mm
Sanden#
4269
5752
Model
7H15HD
Volt
24
T3D
270cc
Mount
Ear
Head
JD
R134a
Clutch
2gr 125mm
Sanden#
4652
FORD- see note
T10
1 and 2
5770 ........ w/ clutch
5770NC ... w/o clutch
Model
7H15HD
Volt
12
Mount
Direct
Head
WH
Model
5H14HD
Volt
24
210cc
Mount
Ear
Head
FL
Model
7H15HD
Volt
24
200cc
Mount
Ear
Head
JD
FORD- see note
1 and 2
300cc
R134a
Clutch
8gr 119mm
Sanden#
7804
T1
5774
5752A
R134a
Clutch
2gr 132mm
Sanden#
4506/6665
T1
R134a
Clutch
2gr 132mm
Sanden#
4271
Mount
Ear
Head
WJ
5762
Model
7H15HD
Volt
12
135cc
Mount
Ear
Head
KG
R134a
Clutch
8gr 119mm
Sanden#
4712
300cc
R134a
Clutch
2gr 132mm
Sanden#
4603/4469
5772 ........ w/ clutch
Model
7H15HD
Volt
12
Mount
Direct
Head
WH
5764
240cc
R134a
Model
Mount Clutch
7H15HD Ear
2gr 132mm
Volt Head
Sanden#
12
JDA/JD 4644/4664/8104
FORD- see note
1 and 2
FORD- see note
T10
1 and 2
T10
5771 ........ w/ clutch
Model
7H15
Volt
12
T3D,J1
T1
300cc
R134a
Clutch
1gr 169mm
Sanden#
4602
5773NC
Model
510HD
Volt
-
T1
T1
T1
5775
210cc
R134a
Model
Mount Clutch
5H14HD Ear
1var 158mm
Volt
Head Sanden#
24
FL
4516/6672
5786
5788
T1
T5D
R134a
100cc
Model
Mount Clutch
5H09HD Ear
2gr 125mm
Volt
Head Sanden#
12
FL
5072
310cc
R134a
Mount Clutch
Ear
w/o clutch
Head Sanden#
FQ
57093
100cc
R134a
Model
Mount Clutch
5H09HD Ear
2gr 125mm
Volt
Head Sanden#
24
FL
5073
NOTE 1:
5770, 5771, 5772
Uses Grey Ford Connector
(It attaches to the white one
coming off the rear head.)
(Includes Adapter #5599)
5903
Model
510HD
Volt
12
135cc
R12
Mount Clutch
Ear
2gr 132mm
Head Sanden#
B
9103
5905
Model
510HD
Volt
24
135cc
Mount
Ear
Head
B
R12
Clutch
2gr 132mm
Sanden#
9105
5906
Model
510HD
Volt
12
175cc
Mount
Ear
Head
QH
R12
NOTE 2:
5770NC, 5771NC, 5772NC
Uses White Connector since
it does not have a clutch.
Clutch
7gr 119mm
Sanden#
5706
259
COMPRESSORS
T4
Listed In ascending order by part number. See “Wire End Types” chart on page 239.
T1
5912
Model
508
Volt
12
T1
175cc
R12
Mount Clutch
Ear
10gr 125mm
Head Sanden#
FG
5415
COMPRESSORS
T1
5922
Model
510HD
Volt
24
Model
508
Volt
12
Model
508HD
Volt
12
207cc
Mount
Ear
Head
FG
R12
Clutch
1OH 126mm
Sanden#
9514/9583
T1
135cc
R12
Mount Clutch
Ear
1var 158mm
Head Sanden#
C
9122
T1
5937
5914
5925
Model
510HD
Volt
12
R12
Clutch
7gr 119mm
Sanden#
9537
T1
5952
Model
510SHD
Volt
24
5919
Model
510HD
Volt
12
135cc
Mount
Ear
Head
C
R12
Clutch
1var 158mm
Sanden#
9119/9680
T1
135cc
Mount
Ear
Head
C
R12
Clutch
2gr 132mm
Sanden#
9114
T7
175cc
Mount
Ear
Head
FG
T1
T1
5926
Model
508HD
Volt
12
R12
Clutch
1gr 138mm
Sanden#
4519/9684
T1
5956
Model
505
Volt
12
Model
510HD
Volt
12
175cc
Mount
Ear
Head
FG
R12
Clutch
2gr 132mm
Sanden#
9120
FORD- see note
1 and 2
207cc
Mount
Ear
Head
M
R12
Clutch
2gr 132mm
Sanden#
9026
T1
240cc
Mount
Ear
Head
QM
5920
5930NC
Model
508HD
Volt
12
310cc
Mount
Ear
Head
WF
R12
Clutch
w/o clutch
Sanden#
57303
T1
100cc
Mount
Ear
Head
E
R12
Clutch
2gr 125mm
Sanden#
9056
5973
Model
508HD
Volt
24
175cc
R12
Mount Clutch
Ear
2gr 132mm
Head Sanden#
FG
5407
T1
A-B
Distance
Diameter
5974
Model
510HD
Volt
24
260
135cc
Mount
Ear
Head
FG
R12
Clutch
2gr 132mm
Sanden#
9674
5975
Model
510HD
Volt
12
135cc
Mount
Ear
Head
FG
R12
Clutch
1var 158mm
Sanden#
9675
5976
Model
510HD
Volt
24
135cc
R12
Mount Clutch
Ear
1var 158mm
Head Sanden#
FG
9676
Groove
Width
T1
Model
508
Volt
12
175cc
Mount
Ear
Head
FG
R12
Clutch
2gr 132mm
Sanden#
9285
5989
Model
510HD
Volt
12
FORD- see note
1 and 2
T1
135cc
Mount
Ear
Head
QH
R12
Clutch
2gr 132mm
Sanden#
9689
5990
Model
508
Volt
12
175cc
Mount
Ear
Head
B
175cc
Mount
Ear
Head
B
R12
Clutch
w/o clutch
Sanden#
95943
5686A
3/8”-24 Sanden New Style Aluminum
Low Profile w/HNBR O-ring.
Groove
Width
R12
Clutch
2gr 132mm
Sanden#
8399
T5D
Model
7H15HD
Volt
12
310cc
Mount
Ear
Head
FQ
5685
3/8”-24 Universal (R12 & R134a)
Diameter
54018
Model
508
Volt
12
(Also see Pressure Relief Valve Section)
A-B
Distance
Model
508
Volt
24
5995NC
Sanden Pressure Relief Valves
T1
5999
R12
Clutch
2gr 132mm
Sanden#
8390
5686
3/8”-24 Compressor Pop-Off Valve for
Sanden - Bleeds off at 500-600 p.s.i.
T5D
300cc
Mount
Dir Sh
Head
4018
R134a
Clutch
10gr 126mm
Sanden#
4018
T5D
54019
Model
7H15E
Volt
12
T5D
300cc
Mount
Direct
Head
GH
R134a
Clutch
6gr 119mm
Sanden#
4019
T9
54020
Model
7H15E
Volt
12
T7
300cc
Mount
Direct
Head
GH
R134a
Clutch
8gr 119mm
Sanden#
4020
T14D
54021
Model
7H15E
Volt
12
300cc
Mount
Direct
Head
GK
R134a
Clutch
8gr 119mm
Sanden#
4021
T16D
NEW ITEM
54023
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 6gr 125mm
Head Sanden#
4802
4023
54024
Model
SPRHD
Volt
24
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
GQ
4024
54025
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
WH
R134a
Clutch
8gr 119mm
Sanden#
4025
54026
Model
SPRHD
Volt
24
175cc
Mount
Direct
Head
WV
R134a
Clutch
8gr 130mm
Sanden#
4026
261
COMPRESSORS
5985
T1
T3D
T3D
T16D
T5D
NEW ITEM
54027
250cc
Model
Mount
7H15HD Direct
Volt
Head
12
GV
R134a
Clutch
6gr 125mm
Sanden#
4027
COMPRESSORS
T12
54028
Model
7H15HD
Volt
12
250cc
Mount
Direct
Head
GV
R134a
Clutch
8gr 119mm
Sanden#
4028
T5D
54029
Model
SPRHD
Volt
24
175cc
Mount
Direct
Head
SQ
R134a
Clutch
8gr 149mm
Sanden#
4029
T3D, J1
54036
240cc
R134a
Model
7H15E
Volt
12
Mount
Direct
Head
GH
Clutch
10gr 119mm
Sanden#
4036
T3D, J1
NEW ITEM
54046
Model
7H15E
Volt
12
270cc
Mount
Direct
Head
KF
R134a
Clutch
8gr 119mm
Sanden#
4046
54047
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 10gr 126mm
Head Sanden#
WJ
4047
T3D
T3D, J1
54051
Model
7H15E
Volt
24
300cc
Mount
Direct
Head
GV
R134a
Clutch
12gr 126mm
Sanden#
4051
T5D
Model
7H15E
Volt
24
300cc
Mount
Direct
Head
GV
R134a
Clutch
8gr 119mm
Sanden#
4066
T5D
54070
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
JDA
R134a
Clutch
12gr 126mm
Sanden#
4070
T5D
Model
7H15E
Volt
24
300cc
Mount
Direct
Head
GV
R134a
Clutch
2gr 125mm
Sanden#
4052
T5D
NEW ITEM
54066
54052
54071
Model
SPRHD
Volt
12
NEW ITEM
300cc
R134a
Mount Clutch
Direct 6gr 125mm
Head Sanden#
WH
4071
54072
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 8gr 140mm
Head Sanden#
MDA
4072
T2
A-B
Distance
Diameter
NEW ITEM
54074
Model
7H15HD
Volt
24
262
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
JDA
4074
54083
300cc
Model
Mount
7H15HD Direct
Volt
Head
12
4802
R134a
Clutch
8gr 119mm
Sanden#
4083/4548
54086
Model
SPRHD
Volt
12
240cc
Mount
Direct
Head
KGA
R134a
Groove
Width
Clutch
8gr 119mm
Sanden#
4086
T5D
T5D
T3D
T5D
NEW ITEM
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
GSA
R134a
Clutch
7gr 126mm
Sanden#
4379/4087
T5D
54088
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
MDA
R134a
Clutch
12gr 126mm
Sanden#
4088
T5D
NEW ITEM
54093
Model
7H15E
Volt
24
200cc
Mount
Ear
Head
JD
R134a
Clutch
2gr 125mm
Sanden#
4093
T5D
NEW ITEM
54096
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
KCA
R134a
Clutch
7gr 126mm
Sanden#
4096
T13
NEW ITEM
HT-6 Replacement
54097
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
4802
R134a
Clutch
8gr 140mm
Sanden#
4097
T5D
54098
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
4802
R134a
Clutch
6gr 160mm
Sanden#
4098
T5D
NEW ITEM
54277
Model
7H15E
Volt
12
300cc
Mount
Direct
Head
4418
54099
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
4802
R134a
Clutch
8gr 160mm
Sanden#
4099
R134a
T7
Model
7H15HD
Volt
12
135cc
Mount
Direct
Head
GT
R134a
Clutch
6gr 112mm
Sanden#
4261
T7
NEW ITEM
NEW ITEM
Clutch
8gr 119mm
Sanden#
4277
54261
54280
Model
SPRHD
Volt
24
300cc
Mount
Direct
Head
GQ
R134a
Clutch
6gr 125mm
Sanden#
4280
T16D
54283
Model
7H15E
Volt
12
300cc
Mount
Direct
Head
4095
R134a
Clutch
8gr 152mm
Sanden#
4283
54289
Model
7H15HD
Volt
12
180cc
Mount
Direct
Head
4289
R134a
Clutch
7gr 126mm
Sanden#
4289
T3D
A-B
Distance
Diameter
NEW ITEM
Groove
Width
54291
Model
7H15E
Volt
24
180cc
Mount
Direct
Head
4095
R134a
Clutch
8g r130 mm
Sanden#
4291
54298
Model
SPRHD
Volt
24
280cc
Mount
Direct
Head
WV
R134a
Clutch
8gr 180mm
Sanden#
4298
54308
Model
7H15HD
Volt
12
135cc
Mount
Ear
Head
GV
R134a
Clutch
2gr 152mm
Sanden#
4308
263
COMPRESSORS
54087
T3D, J1
T3D
T5D
T16D
3-5/8”
92mm
3-3/8”
87mm
54309
Model
7H15HD
Volt
24
200cc
Mount
Ear
Head
GV
R134a
Clutch
10gr 126mm
Sanden#
4309
T3D, J1
54310
Model
7H15HD
Volt
12
200cc
Mount
Direct
Head
GV
R134a
Clutch
8gr 119 mm
Sanden#
4310
T7
54322
Model
7H15HD
Volt
12
COMPRESSORS
Model
7H15HD
Volt
24
200cc
Mount
Direct
Head
GV
R134a
Clutch
8gr 119mm
Sanden#
4322
T5D
R134a
Clutch
8gr 119mm
Sanden#
4327
T5D
Model
7H15E
Volt
12
54355
Model
7H15E
Volt
24
300cc
R134a
Mount Clutch
Direct 8gr 130mm
Head Sanden#
GK
4355
T5D
300cc
Mount
Direct
Head
GWA
Model
SPRHD
Volt
24
175cc
R134a
Mount Clutch
Direct 8gr 180mm
Head Sanden#
WV
4324
T5D
54369
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 10gr 126mm
Head Sanden#
GSA
4369
T9
R134a
Clutch
6gr 119mm
Sanden#
4382
T11D
54384
Model
SPRHD
Volt
12
300cc
Mount
Direct
Head
GQ
R134a
Clutch
10gr 126mm
Sanden#
4384
T2D
54378
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 12gr 126mm
Head Sanden#
4802
4378
T5D
NEW ITEM
54382
54324
NEW ITEM
NEW ITEM
54327
300cc
Mount
Direct
Head
GSA
54389
Model
SPRHD
Volt
24
300cc
Mount
Direct
Head
GSA
NEW ITEM
R134a
Clutch
7gr 126mm
Sanden#
4389
54394
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Ear
8gr 119mm
Head Sanden#
MDA
4394
T5D
A-B
Distance
Diameter
54399
Model
SPRHD
Volt
12
264
135cc
R134a
Mount Clutch
Direct 7gr 119mm
Head Sanden#
GV
4399
54402
Model
7H15E
Volt
24
300cc
R134a
Mount Clutch
Direct 1gr 138mm
Head Sanden#
MD
4402
54404
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
KG
4404
Groove
Width
T3D
T5D
T5D
T2D
NEW ITEM
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
JDA
R134a
Clutch
10gr 119mm
Sanden#
4405
T5D
54407
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 10gr 126mm
Head Sanden#
4418
4407
T5D
54410
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
WJ
4410
T3D,J1
54412
Model
SPRHD
Volt
12
54408
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Ear
6gr 125mm
Head Sanden#
GSA
4408
T13
300cc
R134a
Mount Clutch
Direct 10gr 126mm
Head Sanden#
MDA
4412
T1
54409
Model
7H15E
Volt
24
R134a
300cc
Mount Clutch
Ear
2gr 152mm
Head Sanden#
JD
4409
T1
54440
Model
7H15HD
Volt
12
HT-6 Replacement
R134a
135cc
Mount
Direct
Head
GT
Clutch
6gr 130mm
Sanden#
4440
T1
54451
Model
7H15HD
Volt
12
200cc
Mount
Ear
Head
GV
R134a
Clutch
8gr 119mm
Sanden#
4451
T5D
NEW ITEM
54453
Model
7H15
Volt
12
200cc
R134a
Mount Clutch
Ear
8gr 119mm
Head Sanden#
MDA
4453
T1
54455
Model
7H13
Volt
12
135cc
R134a
Mount Clutch
Ear
6gr 119mm
Head Sanden#
JE
4455
T5D
54456
Model
7H13
Volt
12
135cc
Mount
Ear
Head
JE
R134a
Clutch
2gr 125mm
Sanden#
4456
54475
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 6gr 125mm
Head Sanden#
CBA
4475
T5D
A-B
Distance
NEW ITEM
54510
Model
5H14HD
Volt
12
210cc
R134a
Mount Clutch
Ear
2gr 132mm
Head Sanden#
FL
4510
Diameter
NEW ITEM
54538
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 2gr 132mm
Head Sanden#
GH
4538
54540
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 2gr 132mm
Head Sanden#
4802
4540
Groove
Width
265
COMPRESSORS
54405
T5D
T12D
T5D
T5D
NEW ITEM
54541
Model
7H15HD
Volt
12
300cc
R134a 54545
Mount Clutch
Model
Direct 12gr 126mm 7H15E
Volt
Head Sanden#
12
4418
4541
270cc
Mount
Direct
Head
KF
R134a
Clutch
8gr 119mm
Sanden#
4545
COMPRESSORS
NEW ITEM
Model
SPRHD
Volt
12
300cc
R134a
Mount Clutch
Direct 6gr 133mm
Head Sanden#
MDA
4578
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
4802
4548
ENHANCED
SEALED
T12
54578
54548
NEW ITEM
NEW ITEM
54580
Model
7H15E
Volt
24
300cc
Mount
Direct
Head
KF
54577
Model
SPRHD
Volt
12
T5D
NEW ITEM
R134a
Clutch
1-A gr 126mm
Sanden#
4580
54581
Model
7H15-ES
Volt
12
300cc
R134a
Mount Clutch
Direct 7gr 126mm
Head Sanden#
4577
4577
NEW ITEM
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
WV
4581
54584
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
4018
4584
T7
NEW ITEM
54585
Model
7H15E
Volt
12
300cc
R134a
Mount Clutch
Direct 6gr 119mm
Head Sanden#
4018
4585
T5D
NEW ITEM
54592
Model
7H15HD
Volt
24
300cc
R134a
Mount Clutch
Direct 8gr 119mm
Head Sanden#
4545
4592
T1
NEW ITEM
54600
Model
7H15SHD
Volt
12
270cc
Mount
Ear
Head
JD
R134a
Clutch
6gr 125mm
Sanden#
4600
54648
Model
SPRHD
Volt
24
240cc
Mount
Direct
Head
YE
R134a
Clutch
10gr 126mm
Sanden#
4648
T5D
A-B
Distance
NEW ITEM
54651
240cc
R134a
Model
Mount Clutch
Volt
Head Sanden#
24
GWA 4651
266
Diameter
54654
270cc
R134a
Model
Mount Clutch
7H15SHD Ear
2gr 132mm
Volt
Head Sanden#
12
JD
4654
54667
300cc
Model Mount
7H15HD Direct
Volt
Head
12
KC
R134a
Groove
Width
Clutch
8gr 119mm
Sanden#
4667
T1
T5D
54673
Model
7H15SHD
Volt
12
270cc
R134a
Mount Clutch
Ear
2gr 132mm
Head Sanden#
KC
4673
54675
Model
7H15HD
Volt
12
T5D
300cc
Mount
Direct
Head
4018
R134a
Clutch
12gr 126mm
Sanden#
4675
T3D
54676
Model
7H15E
Volt
12
300cc
Mount
Direct
Head
GWA
R134a
Clutch
8gr 119mm
Sanden#
4676
54678
Model
7H15HD
Volt
12
300cc
Mount
Direct
Head
JDA
R134a
Clutch
12gr 126mm
Sanden#
4678
NEW ITEM
54691
Model
7H15HD
Volt
12
240cc
Mount
Direct
Head
GN
NEW ITEM
R134a
Clutch
6gr 119mm
Sanden#
4691
T7
54737
Model
7H15SHD
Volt
12
54693
Model
7H15
Volt
12
240cc
Mount
Direct
Head
SJ
R134a
Clutch
6gr 120mm
Sanden#
4693
T12
300cc
R134a
Mount Clutch
Ear
8gr 133mm
Head Sanden#
GK
4737
T6D
54738
Model
7H15SHD
Volt
12
54714
Model
7H15HD
Volt
12
NEW ITEM
200cc
R134a 54720
Mount Clutch
Model
Direct 1 gr 132mm
7H15E
Volt
Head Sanden#
12
SJA
4714
T1
270cc
R134a
Mount Clutch
Ear
8gr 133mm
Head Sanden#
JD
4738
T5D
54762
Model
7H15HD
Volt
24
300cc
Mount
Direct
Head
4347
R134a
Clutch
8gr 119mm
Sanden#
4720
T6
175cc
Mount
Ear
Head
JD
R134a
Clutch
8gr 119mm
Sanden#
4762
54775
Model
7H15HD
Volt
12
210cc
Mount
Direct
Head
GH
R134a
Clutch
8gr 119mm
Sanden#
4775
T6
A-B
Distance
Diameter
54785
210cc
Model
7H15HD
Volt
12
Mount
Direct
Head
GF
R134a
Clutch
7gr 130mm
Sanden#
4785
54803
300cc
Model
7H15HD
Volt
12
Mount Clutch
Direct 6gr 125mm
Head Sanden#
4418
4803
R134a
54825
300cc
R134a
Model Mount
Clutch
7H15HD Ear(swing)6gr 130mm
Volt
Head
Sanden#
12
GRA
4825
Groove
Width
267
COMPRESSORS
T5D
T5D
T6
T1
T1
NEW ITEM
54897
Model
7H15HD
Volt
12
300cc
R134a
Mount Clutch
Direct 6gr 125mm
Head Sanden#
KCA
4897
T1
54979
Model
TRS105
Volt
12
R134a
Clutch
7gr 95mm
Sanden#
4979
T15
NEW ITEM
COMPRESSORS
240cc
Mount
TR
Head
BT-H
56632
Model
5H14HD
Volt
24
175cc
Mount
Ear
Head
M
55077
Model
5H09HD
Volt
12
T1
R134a
Clutch
2gr 132mm
Sanden#
6632
56642
Model
5H14HD
Volt
12
175cc
Mount
Ear
Head
C
R134a
Clutch
2gr 132mm
Sanden#
6642
T1
175cc
R134a
Mount Clutch
Ear
8gr 119mm
Head Sanden#
FL
6697
T1
Model
5H14HD
Volt
12
Model
7H13
Volt
24
268
Model
508HD
Volt
24
R134a
Clutch
10gr 119mm
Sanden#
6670/4526
56681
Model
5H14HD
Volt
12
310cc
Mount
Ear
Head
FG
Clutch
1gr 152mm
Sanden#
5427
210cc
Mount
Ear
Head
FL
Clutch
1 gr 152mm
Sanden#
6681
R12
57170
Model
7B10
Volt
12
100cc
Mount
Ear(swing)
Head
Spec’l
R134a
57176
Clutch
2gr 115mm
Sanden#
7170
Model
7B10
Volt
12
NEW ITEM
100cc
R134a
Mount
Clutch
Ear(swing) 6gr 112mm
Head
Sanden#
Spec’l
7176
T1
135cc
Model Mount
7H13
Direct
Volt
Head
24
WM
R134a
Clutch
1 gr 146mm
Sanden#
7351
57304
135cc
Mount
Ear
Head
JE
Model
7H13
Volt
12
R134a
Clutch
6gr 119mm
Sanden#
7304
T1
NEW ITEM
57351
R12
T1
NEW ITEM
NEW ITEM
175cc
R134a
Mount Clutch
Direct 1gr 125mm
Head Sanden#
WM
7344
175cc
Mount
Ear
Head
M
T1
T1
57344
55427
T1
56670
NEW ITEM
Model
5H14SHD
Volt
24
R134a
Clutch
2gr 125mm
Sanden#
5077
NEW ITEM
T1
56697
100cc
Mount
Ear
Head
K
NEW ITEM
57360
Model
7H13
Volt
24
135cc
R134a
Mount Clutch
Direct
1 gr 146mm
Head Sanden#
WL
7360
57361
135cc
R134a
Model Mount
Clutch
7H13
1 gr 125mm
Volt
Head
Sanden#
24
WL
7361
T16
T16
T16
58045
240cc
R134a 58069
Model
Mount
Clutch
Model
7H15E Ear
2gr 132mm
7H15E
Volt
Head Sanden#
Volt
24
WZ
8045
24
T9
240cc
R134a
Mount Clutch
Ear
2gr 132mm
Head Sanden#
FZ
8069
58112
Model
7H15E
Volt
24
T15
240cc
R134a
Mount Clutch
Direct 8gr 130mm
Head Sanden#
WZ
8112
T16
200cc
Mount
Direct
Head
WV
200cc
Mount
Direct
Head
QC
R134a
Clutch
4gr 112mm
Sanden#
8147
NEW ITEM
R134a
58152
Model
7H15SHD
Volt
24
Clutch
4gr 112mm
Sanden#
8148
240cc
Mount
Ear
Head
WZ
R134a
58174
Clutch
2gr 132mm
Sanden#
8152
Model
7H13
Volt
12
200cc
Mount
Direct
Head
HTO
R134a
58387
Clutch
1vg 158.7mm
Sanden#
8174
Model
508
Volt
12
175cc
Mount
Ear
Head
B
R12
Clutch
2gr 152mm
Sanden#
8387
T1
A-B
Distance
Diameter
NEW ITEM
58901
Model
7H13
Volt
12
135cc
R134a
Mount Clutch
Ear
8gr 119mm
Head Sanden#
KG
8901
59112
Model
510HD
Volt
12
135cc
R12
Mount Clutch
Ear
1gr 152mm
Head Sanden#
B
9112
Groove
Width
Sanden Pressure Relief Valves
(Also see Pressure Relief Valve Section)
5685
3/8”-24 Universal (R12 & R134a)
5686
3/8”-24 Compressor Pop-Off Valve for
Sanden - Bleeds off at 500-600 p.s.i.
5686A
3/8”-24 Sanden New Style Aluminum
Low Profile w/HNBR O-ring.
269
COMPRESSORS
Model
7H15
Volt
12
Model
7H15
Volt
12
T1
NEW ITEM
58148
58147
COMPRESSORS — SANDEN (FLX7 Universal Style)
IMPORTANT: FLX7 Compr. are equipped with a GV style rear pad head - MANIFOLD REQUIRED.
3-5/8” / 92mm
3-3/8” / 87mm
1 GROOVE - EAR MOUNT
2 GROOVE - DIRECT MOUNT
Diameter
Volt
Part#
Diameter
Volt
Part#
Diameter
Volt
Part#
138mm/5.50"
12v
5292
125mm/4.9"
12v
5286 *1
125mm/4.9"
12v
5288 *2
138mm/5.50"
24v
5293
125mm/4.9"
24v
5287
158mm/6.25"
12v
5295
158mm/6.25"
24v
5296
132mm/5.25"
132mm/5.25"
12v
24v
5290
5291
152mm/6.0"
24v
5294
COMPRESSORS
3-5/8” / 92mm
3-3/8” / 87mm
8 & 10 GROOVE - DIRECT MOUNT
Diameter
Volt
Part No.
Diameter
Volt
Part#
Diameter
Volt
Part#
119mm/4.6"
12v
5282 *3
119mm/4.6"
8 gr
12v
5285 *4
125mm/4.9"
12v
5289
119mm/4.6"
24v
5283
119mm/4.6"
8 gr
24v
54327
125mm/4.9"
24v
54309
119mm/4.6"
(CAT type)
12v
5284
119mm/4.6"
10 gr
12v
5306 *5
*1 ....
*2 ....
*3 ....
*4 ....
Can
Can
Can
Can
substitute
substitute
substitute
substitute
5286E
5288E
5282E
5285E
.......
.......
.......
.......
Enhanced Version
Enhanced Version
Enhanced Version
Enhanced Version
*5 .... 5306 .............. Enhanced Version
• All FLX7 have 200cc oil and
• All have T3D, J1 wire end (see “Wire End Types” chart on page 239)
MANIFOLD - REQUIRED (choose correct style for above compressors)
Made from forged steel.
#10
5201
Vertical 3/4" x 7/8"
#8
#10
5202
Horizontal 3/4" x 7/8"
LEAD WIRE
Use when replacing clutch with 2 wires.
1545
Clutch Lead Wire
270
#10
#8
5203
Vertical 1"-14 Tube-O
5204
Horizontal 1"-14 Tube-O
#8
5205
Vertical Flare
Compressor with Clutch
+ Plus Manifold
= Compressor Assembly
FLX7
(usesd #0121 o-rings)
GV Style Rear Pad Head
SANDEN FLX7 (R134a) — COMPRESSORS
TIPS FOR SANDEN FLX7 COMPRESSORS
1. FLX7 compressors can be used to replace most R12 and R134a Sanden and Seltec type models, due to their design which
incorporates a pad style head using a bolt-on manifold. In some cases the manifold is not required (where the OE compressor is
a pad style). The FLX7 compressor is available in 7 different clutch styles, in both 12 & 24 volt. Although the FLX7 is supplied with
a single wire coil connection, a FLX7 wiring harness (1545) is available to convert the compressor to a double wire style.
2. If an application requires such, the FLX7 can be rotated 90° degrees left or right to properly “clock” the QV pad on the rear head
(ear mount only). Just remember the oil plug must not be facing downward after it is rotated to its final position.
3. The FLX7 will outperform the SD508, SD510, and SD5H14 Sanden models, as well as Seltec models TM15, and TM16.
4. The overall length of the FLX7 compressor with an attached manifold may be longer than the OE compressor it will replace,
especially if the original has a one piece aluminum rear head (non manifold type). In most cases the additional length will not
present a problem. For extremely tight fit applications, check length before ordering.
Description:
FLX7 with Vertical Manifold ................ 10 3/16” (overall length incl. clutch & manifold)
FLX7 with Horizontal Manifold ........... 10 1/2” (overall length incl. clutch & manifold)
SUBSTITUTION CHART
(NOT A DIRECT INTERCHANGE)
Sanden original equipment compressors interchange to FLX7 plus hose port manifolds
4428
4501
4502
4506
4507
4508
4509
4510
4511
4513
4514
4515
4516
4517
4518
4519
4521
4522
4523
4525
4526
4527
4529
4532
4536
4537
4604
4608
4626
4626
4627
4637
4641
4643
4646
4647
4652
4656
4657
4663
4664
5288
5196
5195
5291
5291
5289
5290
5290
5295
5290
5282
5295
5296
5190
5191
5193
5291
5282
5282
5290
5289
5291
5290
5294
5290
5291
5293
5292
5297
5288
5286
5284
5285
5290
5290
5290
5287
5293
5292
5286
5290
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
5202
5203
5203
5201
5201
5201
5201
5201
5203
5204
5201
5201
5201
5204
5204
5204
5204
5204
5203
5202
5203
5203
5201
5202
5202
5201
5201
5201
5202
5204
5203
5204
5201
5201
5201
5201
SANDEN PART# Manifold
Number “FLX7”+ Number
4665
4666
4706
4707
4708
4709
4710
4711
4712
4741
4742
4743
4744
4745
4746
4747
4762
4763
4764
4765
4779
5407
5411
5413
5415
5425
5754
6626
6627
6629
6630
6631
6632
6634
6642
6655
6656
6664
6665
6667
6670
5282
5285
5286
5282
5286
5286
5282
5282
5282
5287
5287
5287
5287
5296
5295
5295
5283
5283
5283
5283
5286
5191
5189
5191
5189
5195
5193
5290
5291
5282
5290
5290
5291
5291
5290
5282
5289
5290
5291
5291
5289
plus 5201
plus 5202
plus 5203
plus 5202
plus 5203
plus 5201
plus 5202
plus 5201
plus 5202
plus 5203
plus 5204
plus 5201
plus 5201
plus 5203
plus 5201
plus 5203
plus 5204
plus 5202
plus 5201
plus 5201
plus 5204
plus 5201
plus 5201
plus 5201
plus 5201
plus 5201
plus 5201
plus 5202
plus 5204
plus 5204
plus 5202
plus 5203
plus 5204
plus 5204
plus 5201
plus 5201
plus 5203
plus 5202
Number “FLX7” + Number
6671
6672
6673
6675
6676
6677
6678
6679
6680
7401
7402
7409
7427
7492
7621
7819
7822
7824
7825
7862
7864
7865
7866
7867
7877
8017
8018
8019
8023
8025
8026
8061
8062
8103
8104
8390
8396
8399
9005
9026
9040
5295
5296
5295
5282
5290
5290
5290
5294
5291
5186
5186
5186
5182
5182
5186
5286
5282
5287
5290
5290
5282
5282
5287
5290
5290
5287
5290
5290
5286
5282
5282
5287
5290
5282
5290
5190
5194
5191
5190
5190
5190
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
5203
5201
5201
5204
5202
5203
5203
5201
5202
5203
5204
5201
5203
5201
5201
5204
5204
5201
5201
5202
5202
5201
5201
5201
5204
5201
5201
5204
5202
5202
5201
5201
5201
5201
5201
5205
5205
5205
5203
5204
5201
Number “FLX7”+ Number
9103
9105
9108
9114
9119
9120
9122
9125
9133
9137
9143
9263
9264
9265
9279
9283
9285
9505
9513
9515
9519
9537
9540
9546
9563
9565
9570
9589
9663
9672
9674
9675
9676
9685
9689
5190
5191
5190
5190
5195
5190
5196
5190
5191
5191
5191
5190
5190
5191
5190
5182
5190
5191
5189
5186
5190
5182
5182
5182
5190
5182
5182
5192
5182
5190
5191
5195
5196
5192
5190
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
plus
5205
5205
5201
5203
5203
5201
5203
5204
5204
5203
5201
5203
5204
5204
5204
5205
5201
5203
5205
5201
5203
5201
5204
5203
5205
5204
5204
5201
5201
5201
5201
5201
-
COMPRESSORS
Number “FLX7” + Number
BENEFITS
• Reduced Part Numbers
• Reduced Inventory Costs
• Expanded Product Configurations
271
SANDEN REPLACEMENT KIT - T/CCI (YORK STYLE) TO SANDEN
Includes Everything Needed
REPLACE THE TCCI/YORK
COMPRESSOR WITH A SANDEN
SD7H15 MODEL
for an Easy Installation!
• Longer Life
• Colder Duct Temperature
• Eliminate Shaft Seal Leaks
• Improved Performance and Quality
• Less Vibration (Det-60 Series Models)
REPLACEMENT CHART - from T/CCI (York Style) to SANDEN Compressor
Note: use short body if used on vehicles with tight quarters or clearance issues in rear.
COMPRESSORS
OE Style Assy
Grooves
5261
1
5263 w/5540 (2)
5263SF w/5540 (2)
5263
1
5263S
5263SF
5256 w/5045 (24v)
2
5234S
5234SF
5260
2
5262S w/5540 (2)
use 5266SF w/5540 (2)
5262
2
5262S
use 5266SF (or 5266SRK Det-60 conv.)
5266
2
5266S
5266SF (or 5266SRK Det-60 conv.)
5264
6
5267S
use 5267SF
5267
6
5267S
5267SF
5268
6-FF
5268S
5268SF
5265
8
5265S
use 5269SF
5269
8
5269S
5269SF (or 5269SRK Det-60 conv.)
SD7 Repl Assy (short body)
272
SD7 Repl Assy (short body)SD7 Repl Assy (FLX7)
SD7 Repl Assy (FLX7)
Series “60”
(Detroit Series 60 conversion)
SANDEN REPLACEMENT KIT - T/CCI (YORK STYLE) TO SANDEN
T/CCI (York Style) to SANDEN CONVERSION PARTS
(all parts sold individually)
MANIFOLDS (supplied with hardware)
Part No.
Description
5206L .............. LH Suction Manifold used on Short body conversion
COMPRESSORS
5206R ............. RH Suction Manifold used on Short body conversion
BRACKET KITS (supplied with hardware)
Part No.
Description
9030 ................ Detroit Series 60 Relocation Kit . 2 grv only w/passenger side mtg only
9031 ................ T/CCI to Sanden Brackets for .... 1 grv (exc. below)
9032 ................ T/CCI to Sanden Brackets for .... 2 grv and also 1 grv 5036, 5062
9033 ................ T/CCI to Sanden Brackets for .... 1 grv 5033
9036 ................ T/CCI to Sanden Brackets for .... 6 grv
9036F .............. T/CCI to Sanden Brackets for .... 6-FF grv
9038 ................ T/CCI to Sanden Brackets for .... 8 grv
Shown #9038
273
COMPRESSORS — SANDEN / SELTEC
TROUBLE SHOOTING CHART
PROBLEM DIAGNOSIS
AND INSPECTION
SYMPTOM
CAUSE AND REMEDY
REPAIR OR REPLACE
LACK OF COOLING - (Smooth Running Compressor)
Unusually high suction
pressure with unusually low
discharge pressure
1. Perform a valve plate test
Broken head or block gasket
Broken or deformed reed valve
Foreign substance under the
reed valve or gasket
1. Check for low refrig. charge
Unusually low suction and
discharge pressure
Shaft seal leak
Cylinder head leak
Gasket leak
Oil filter plug leak
Cracked cylinder block
2. Leak check compressor
3. Leak check and diagnose
system (see service manual)
LACK OF COOLING - (Rough Running Compressor)
1. Check belt tension
COMPRESSORS
Intermittent or Inoperative
2. Check clutch air gap
Adjust air gap
3. Check clutch volts, amps,
and coil lead wire
Broken lead wire
Clutch coil defect - internal
System ground - see manual
4. Perform shaft turning
smoothness test
Rough Running
Compressor failure - internal
UNUSUAL NOISE
NOTE: Noises may be caused by components other than the compressor; however, it is normal to generate some noise.
1. Check compressor mounting
Clutch Engaged
Loose belt, bracket or bolts
Water or air pump, alt, timing belt
Adjust air gap
Defective coil
Recharge and recheck
Replace rotor / armature assm.
Restore to proper level
Compressor failure - internal
Broken discharge valve reed or
retainer
Broken suction valve reed
Broken gasket
2. Check other engine parts
3. Check for intermittent or slipping
clutch
4. Check for proper refrig.charge
5. Check clutch bearing
6. Oil level - insufficient
7. Shaft turning smoothness test
8. Remove valve plate and inspect
Clutch Disengaging or
“Chattering”
Adjust air gap
Defective clutch pulley or
front plate
1. Check air gap
BELT TENSION SPECIFICATIONS (recommended for maximum clutch bearing life)
Grooves
Belt Wdth
1 or 2
1 variable
1/ 2 "
1
5/ 8 "
1 /2 "
/
9/16"
Tension (lbs.)
Grooves
Grv Wdth Tension( lbs.)
121 ± 5
132 ± 5
6 Multi
7 Multi
1/ 8"
132 ± 5
8 Multi
10 Multi
1/ 8"
1/ 8"
1/ 8"
180 ± 5
210 ± 5
240 ± 5
300 ± 5
(Tolerance ± 4.95 lb; multi grooves based on 30 lb per groove)
274

compressors — sanden

Transcription

Similar documents

MEI - Sanden Compressors

Clutch

Spiele für Nintendo DS / Nintendo 3DS in der Stadtbibliothek