HF Transceiver Packages - South Midlands Communications Ltd

South Midlands Communications
www.smc-comms.com
HF Transceiver IC-F8101
HF Transceiver IC-78
HF Transceiver IC-F7000
HF TRANSCEIVER IC-78
The IC-78 is a high performance HF transceiver.
Innovative features such as 99 memory channels,
high C/N ratio, direct channel entering, data
communication capabilities and more, offer easy
operation for anyone. All these features come in a
compact, rugged package that can be conveniently
used in a base station or in a vehicle, as you prefer.
SPECIFICATIONS
Frequency range
Rx 0.030–29.999999 MHz*1
Tx 1.600–29.999999 MHz*2
*1-Guaranteed range: 0.5–29.999999 MHz
*2-Not guaranteed for some frequency bands
Mode
USB, LSB, CW, RTTY (FSK), AM
Number of memory Ch.
99 (Duplex) +1 (Call channel)
Frequency stability
Less than ±200 Hz from 1 min. to
60 min. after power ON. After that
rate of stability less than ±30 Hz/hr.
at +25°C (+77°F). Temperature fluctuations
0°C to +50°C (+32°F to
+122°F) less than ±350 Hz
Power supply
requirement
13.8 V DC ±15 % (negative ground)
Current drain (at 13.8
V DC)
Receive:
Stand-by 1.3 A
max. audio 2.0 A
Transmit:
max. power 20.0 A
Operating temp. range
–10°C to +60°C; +14°F to +140°F
Antenna connector
SO-239 (50 Ω)
Dimensions
(projections not
included)
240(W)×95(H)×239(D) mm
97⁄16(W)×33⁄4(H)×913⁄32(D) in
Weight (approx.)
3.8 kg; 8 lb 6 oz
ACC connector
13-pin
REMOTE connector
2-conductor 3.5 (d) mm (1⁄8″)
Superior features support serious communications
Direct channel selection
A 10-key pad has been adopted on the front panel. A channel number, or an operating
frequency*, can be entered from the keypad directly. Also, memory channel editing is
possible. A large channel selector and up/down keys are available to suit your operating
style for your convenience. Total and simple operation is provided! *depending on
version
Noise blanker
To reduce pulse-type noise, a level adjustable noise blanker is built-in. Various levels of
pulse-type noise, such as from car ignitions, etc., can be reduced.
Pre-amp. and attenuator
A pre-amplifier and an RF attenuator are adopted for more pleasant reception.
Convenient when weaksignals or extremely strong signals are received, to present
better quality readability.
Cloning capability
Programmed data cloning capability between transceivers is available, so that an
identical transceiver setting can be made immediately.
Built-in 2-tone alarm*
The 2-tone alarm for an emergency signal transmission is built-in*. Independent
tone switch is adopted for quick and simple emergency calls. *depending on version
Durable, powerful construction
The IC-78 delivers a powerful 100 W of output power, providing the talk power you need to
reach the most distant locations. Its one-piece, die-cast aluminum construction combined with a
large heat sink, helps keep internal temperatures down and ensures that operation is stable at
high duty cycles. And its compact size of 240(W)× 95(H)×239(D) mm* makes installation easy.
*97⁄16(W)×33⁄4(H)×913⁄32(D) in.
Simple operation
The IC-78 is equipped with a large easy-toread LCD. A minimum number of switches and controls
allow for superior feature selectability. Keys access functions directly–there’s no secondary function
key. You can enter your operating frequency*, or memory channel number directly from the 10- key
pad. *depending on version
Ample 99 channels with 8-digit channel name capability
An affordable 99 duplex memory channels are available for storing individual transmit and receive
frequencies, operating mode, filter setting, as well as 8-character channel names. You can enter
channel assignments easily from the 10-key pad. In addition, an extra 1 call memory is available for
storing the most often used, or most important frequency. An independent, one-touch recall switch is
available.
Superior basic performance
A 4-element system is employed for the 1st receive mixer, providing superior receive IMD, especially
from in-band, nearby interfering signals. A well-designed double-conversion system to help minimize
image and spurious responses for better signal fidelity, is also built-in. A newly designed PLL circuit
has been adopted to improve C/N ratio characteristics. The combination of the 4- element system
mixer and new PLL circuit allows superior basic performance.
Front mounted loud speaker
With the speaker facing the operator, audio sounds can be clearly heard without impediment
during operation. It is no longer necessary to manually increase the volume to try and capture audio
sounds.
High frequency stability
When the optional CR-338 HIGH STABILITY CRYSTAL UNIT is installed, it allows up to
±0.5 ppm of extremely high stable operation.
Flexible filter selection
An optional IF filter can be installed into the transceiver, providing 5 passband widths selectable in
SSB, CW or RTTY modes.
VFO mode operation*
For continuous frequency operation, VFO mode operation* capability is available. It is convenient
when searching for signals, around the programmed frequencies, such as short wave broadcasts, etc.
*depending on version
SQL/RF gain controller
In addition to the squelch control, an RF gain control is available, and the controller is
combined with the squelch control. The RF gain adjusts minimum response receiver
gain, and ignores signals weaker than the pre-set level— providing pleasant stand-by, or
scanning. The SQL/RF GAIN controller action is selectable from squelch only, RF gain
only or combined, in the SET mode according to your operating style and mode.
Data communications
In addition to the current voice and key operation, FSK (First Shift Keying) type RTTY
mode is available. By connecting a terminal unit or terminal node controller to the ACC
socket on the rear panel, data acquisition and text-base file transfers and other data
communication can be made. On RTTY, shift width, tone frequencies and polarization
are also selectable.
Other features
•Built-in mic. compressor increases average talk power
•Complete CW features
•Variety of scanning function types
•IF shift interference rejection
•Built-in antenna tuner control circuitand selectable antenna tuner
•Hand microphone is supplied
•VOX capability, and more...
South Midlands Communications Ltd. SM House, School Close,
Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND
Tel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]
HF TRANSCEIVER IC-F7000
Advanced selective call and ALE make HF
communication easier than ever!
The IC-F7000 is an HF land mobile transceiver
especially designed for long distance communications.
Such communications used to require specially skilled
operators, but the IC-F7000 makes HF LMR operation
simple and efficient with the following advanced
functions and features.
Selective call
Uses a unique calling address like a telephone number and allows you to
make a call directly to a desired station or group. Compatible with other
brands of radios.
ALE (Automatic Link Establishment) function
This function will check frequency propagation and strength to automatically select
the highest
quality signal for the best communication possible.
HF
TRANSCEIVER
Versatile configuration
The controller and speaker are separated from the main unit. Also, the size
of the main unit in particular has been reduced, so that the IC-F7000 can
be installed almost anywhere.
SPECIFICATIONS
Other capabilities available with selective call and ALE
Selcall
Make an individual/group call using a unique 4-digit (or 6-digit) address. The receiving station
sends back an acknowledge (ACK) signal and the scanning stops to allow you to communicate.
Selective beacon call
Selective beacon call allows you to check the propagation before an individual/ group call.
The receiving station sends back an ACK signal and continues scanning.
239.3 (913/32)
SPECIFICATIONS
GPS beacon
call
GENERAL
TRANSMITTER
DIMENSIONS
Frequency coverage
Rx 0.5– 29.9999 (continuous)
GPS beacon call*1 allows you to request the intended ID station to send position information.
(Unit• :Frequency
MHz):
• Output power
coverage (Unit : MHz)Tx
: 1.6–29.9999*
The(Selectable)
receiving :station automatically sends back position information.
0.5– 29.9999
Australia 1.6–29.9MHz 100, 50, 10W PEP
*Rx
Some frequency ranges
are not (continuous)
guaranteed.
GPS position call
General 1.6–3.9MHz
Tx
1.6–29.9999*
125, 50, 10W PEP
GPS position call*1 allows you to send your own position information to the intended ID
Type of emission* : * Some
J3Efrequency
(USB, LSB),
J2B
(AFSK),
F1B
(FSK),
A1A
ranges are not guaranteed.
4.0–29.9MHz
100, 50, 10W PEP
station.
(CW), A3E (AM)
• Type of emission*
: J3E (USB, LSB), J2B (AFSK),
• Spurious emissions
Status call : –43dB below peak output power
* J3E and A3E only at factory
for(CW)
Australia
version
F1Bdefault
(FSK), A1A
, A3E (AM
)
• Carrier suppression
40dB below
peak output
power information including power supply voltage, output
Status call*1: requests
to send
radio status
* J3E and A3E only at factory default for Australia version.
power and VSWR.
This
allows
to monitor
Number of channels
:
400 regular channels, 100 ALE channels
• Unwanted sideband
: 50dB
below
peakyou
output
power the radio station from a remote location.
• Number of channels
: 400 regular channels,
(with 1500Hz Pagecall
AF Input)
Antenna impedance :
50Ω
(SO-239)
100 ALE channels
• MicrophonePagecall*1
impedanceallows
: 600Ωyou to send and receive up to 64-character text messages with the intended
Power
supply impedance : 50Ω13.8V
DC (10.8–15.6V)
ID station. Received messages are recorded in the memory of the radio.
• Antenna
(SO-239)
requirement
:
Telcall
• Power supply
requirement : 13.8V DC (10.8–15.6V)
Telcall*2RECEIVER
allows you to make a telephone call through a telephone interconnect service providCurrent
• Current drain
(at 13.8Vdrain
DC): (at 13.8V DC):
Voice
10A
12A
11A
Max. Audio
3.0A
3.0A
• Operating temp. range : –10°C to +60°C
er. Up toON)
a 16-digit
telephone number can be programmed.
• Sensitivity (pre-amp.
:
Emergency
selcall
J3E (at
20dB SINAD) A3E (at 20dB SINAD)
Allows you 25.1µV
to broadcast
an emergency
emf
200µV emfsignal with own position information.
19 (3/4)
2-Tone
15A
17A
16A
Rx
0.5 – 1.5999MHz
12.6µV
100µV
240 (97/16)
RFDS emergency
call*
1.0µV emf
—
1.6 – 29.9999MHz
The RFDS (Royal
Flying Doctor Service)
emergency call uses a 2-Tone signal for an emergency
0.5µV
call. (* Australia version only)
72 (2 27/32)
6 (1/4)
Australia 1.6–29.9MHz
1.6–3.9MHz
General
4.0–29.9MHz
Tx
• Squelch sensitivity (at S-meter) :
Operating temp. range :
–10°C to +60°C
ALE sounding
• Frequency stability
: ±50Hz (at –10°C to +60°C)
J3E (at 13.800MHz)
Less than
10µV (threshold)
Automatically sends
a sounding
signal at a certain interval (0.5–16 hours) to check the chanFrequency
stability : (W×H×D; projections
±50Hz
–10°C
• Dimensions
not (at
included)
: to +60°C)
Less
32mV
(tight)in a table.
nel propagation
andthan
stores
the data
260 (101/4)
7
27
13
Main unit 240×72×239mm
; 9 ⁄16×2 not
⁄32×9 included):
⁄32 in
Dimensions
(W×H×D; projections
A3E (at 1.000MHz)
Less than 32µV (threshold)
ALE individual/net
call 320mV (tight)
Unit: mm (inches)
Controller
⁄32×2
; 529⁄ 32×1
Less than
×2in 27⁄32×9 13⁄32 in
Main unit 150×50×51mm
240×72×239mm;
9 317⁄16
Automatically selects the best available channel using the ALE table and establishes a connecSpeaker 106×62×46mm; 43⁄16×27⁄16×113⁄16 in
ratio:
Controller 150×50×51mm; 5 29⁄32×1 31⁄32×2 in• Spurious response
tion. Therejection
ALE system
complies with the basic requirements of MIL-STD 188-141-B (Appendix A).
• Weight
:
More than 70dB
Speaker 106×62×46mm;
4 3⁄16×2 7⁄16×1 13⁄16 in (1.6–29.9999MHz)
ALE AMD (Automatic Message Display)
Main unit
4.6kg; 10.1lb
typical
at 10%
• Audio output
power
4.0Wand
Supplied
accessories:
Allows
you to:send
receive
updistortion
to a 90-character
text message
using the ALE function.
Weight
Controller
220g; :7.7oz
● Hand
microphone, HM-146 ● External speaker, SP-25
(at 13.8V DC)Received messages
with a 4Ω
areload
stored in the memory of the
radio.
Main
unit
4.6kg;
10.1lb
Speaker
370g; 13oz
●
Remote
controller,
RC-26
● Microphone hanger
• Clarity variable
range
: ±150Hz
*1 GPS
position
call, GPS beacon call, Pagecall and Status call use Icom original commands. These calls may
Controller
220g;to7.7oz
● DC power cable
● ACC plugs (8-pin DIN)
All stated specifications
are subject
change without nonot be compatible
with other brands.
• Speaker connector
: 2-conductor
3.5 (d) mm (1⁄8")/4Ω
● Tuner connector kit
● Spare fuses
370g;
13oz
tice or obligation. Speaker
Measurements
made
in accordance with
*2 Please consult with a telephone interconnect service provider for details.
● Mounting bracket kits for main unit and remote controller
AS/NZS4770-2000. (Australia version only)
Versatile configuration
The controllerOPTIONS
and speaker are separated from the main (RF) unit for flexible installation.
A 6m separation cable is attached to the controller. The main unit is only 72mm (2 27/32
in) height, so there is almost no limit to the places where the IC-F7000 can be set-up.
The supplied hand microphone, HM-146, allows you to control most of the IC-F7000
functions.
Large and clear indication with the dot-matrix LCD
All operational and status information is easily viewed on the full dot-matrix LCD. Editing a
message or reading a received message are made easy. Also 10 levels of LCD backlighting are available for clear and bright illumination.
General coverage receiver
Wide band, general coverage receive capability is available from 0.5 to 29.999MHz.
Automatic tuning antenna
Recommended
The AT230 automatic tuning antenna is recommended for use with the IC-F7000.
optionThe
AT230 fully covers 2–30MHz. It is also easily installed to a vehicle.
Digital Signal Processor (DSP)
The DSP allows flexible filter setting for J2B (AFSK), F1B (FSK) communication. Optional
filters are not required for improved filter performance.
Other features
125W of powerful
RF POWER
output SUPPLY
PS-60 DC
AT-140
AH-2b ANTENNA ELEMENT
MN-100 ANTENNA MATCHER
ANTENNA MATCHER
• GPS input
(NMEA0183 version 3.01) MN-100L
A full 125W*Provides
of output
power
is available
long
distance
communication.
An
HFreliable
AUTOMATIC
ANTENNA
TUNER
13.6V
DC (30A)
output for
For mobile operation
with the ATMatch the transceiver to a dipole
Match the transceiver to a long• External antenna
32MHz reference
input for accurate
tuning
effective cooling
mechanism
transmission
at afull
power.
Covers
1.6–30MHz with
7moutput
(23
from an
AC outlet. allows continuous
140
or AT-130/E. All bands bewithout applying DC
wire antenna without applying DC
• Voice, S-meter
and Call mute
* 100W only for Australia version and for 4MHz
bandswire
and
above for General
version.
ft) or longer
antenna.
tween
7–30MHz can be matched.
power. 8m×2 antenna wires come
power. 15m×1 antenna wire
• Optional attached.
antenna tuner, AT-140 available
with antenna element, AH-2b
AT-130/E is also available.
comes attached.
Ample memory channels
The IC-F7000 stores 400 channels, 100 ALE channels, 100 telephone numbers, 100
Selcall IDs and 120 ALE IDs. 20 pagecall with up to 64-character messages and 20 ALE,
including up to 90-character; 8ALE
ft AMD messages are stored.
0.3
.5 m
24
rox.
app
30 m; 98.4 ft
AH-710 FOLDED DIPOLE
South Midlands Communications Ltd. SM House, School Close,
Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND
Tel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]
HM-146 HAND MICROPHONE
SP-25 EXTERNAL SPEAKER
OPC-1286
OPC-1287
AT230 AUTOMATIC TUNING
ANTENNA
HF TRANSCEIVER IC-F8101
AUTOMATIC TUNING ANTENNAS
AH-760AH-740
Wide frequency type
Compact type
Your
Professional HF Needs Catered to in One Complete Package
Frequency coverage
Type of emission
Number of channels
Number of addresses
Operating temperature
Frequency stability
Power supply
requirement
Antenna impedance
Current drain
Dimensions (W×H×D)
(Projections not
included)
Weight (approx.)
SPECIFICATIONS
Receive: 0.5–29.9999MHz,
Transmit: 1.6–29.9999MHz
J3E, A3E (RX only) (Australia versions)
J3E, A3E, A1A, F1B, J2B (Export/USA versions)
500 channels
Selcall 500 channels, ALE 500 channels
–30°C to +60°C; –22°F to +140°F
±0.3ppm (at –30°C to +60°C)
13.8V DC Negative ground
10.8–15.6V (Australia versions)
11.73–15.87V (Export/USA versions)
50Ω (SO-239)
Receive - Less than 3A (Max. audio),
1.0A (Stand-by)
Transmit - Less than 28A (Maximum output)
174×62×259 mm; 6.85×2.44×10.2 in
(Controller attached type)
3.9kg; 8.6lb (Controller attached type)
Rock Solid Basics:
ALE (Automatic Link Establishment)
ALE is a system that automatically selects the most suitable channel and establishes
a communication link. ALE provides interoperability with other 2G ALE manufactures
compliant with the FED-STD-1045A ALE standard. ALE individual call, net call, sounding
and AMD (Automatic message display) are available.
Selcall (Selective Calling)
The IC-F8101 provides CCIR493 based 4/6 digit open standards Selcalls, commonly
used in HF network and calls based on the 4/6 digit scheme used in the Icom IC-F7000.
Selcall types: selective calling, phone call, message call, position call, status call,
emergency call and channel test call. Stun command remotely disables radio operation.
Compact and Durable
The IC-F8101 has a durable, enclosed structure securely sealed from intrusion
by all potential elements, and is a visibly compact package. The IC-F8101 and the
CFU-F8100 cooling fan unit has been tested to MIL-STD-810-G and IP54 ratings. Also,
connection cables and connectors are IP54 water resistant.
125W* of Powerful RF Output
A full 125W* output power at full duty cycle voice mode operation is possible with the
fanless design. A 25% duty cycle operation is possible in the data mode (Maximum 5
minutes of continuous transmission). When used with the CFU-F8100 optional external
cooling fan unit, the IC-F8101 ensures full duty cycle data and voice mode operations
for absolute reliability during long continuous transmit cycles, or for operation in hot
climates. * 100W for Australia versions.
Three types of controller configurations:
A Benchmark for Ease and Convenience:
User Friendly Operation
The IC-F8101 is designed for simple, straight forward operation. The Administrator/User
access feature limits the functions that can be accessed by the user. The Administrator
can enter the operating frequency and assign memory channels from the front panel or
the remote control microphone. The following functions can be
assigned to the [I], [II], and [III] function buttons: Main menu,
Manager menu, Set mode, Selcall address list, RX history, and
TX history.
Clear Talk Function
button menus are shown
The clear talk function separates signals from noise using Function
the
at the bottom of the display
DSP, and gives you clearer audio at the touch of a button.
Mute Functions
The IC-F8101 has 3 types of mute functions: call squelch, S-meter squelch and voice
squelch. The call squelch function opens the squelch only when receiving a Selcall or ALE
call sent intentionally to this station, and provides quiet standby.
Digital Signal Processor (DSP)
The latest DSP technology improves both the transmitter and receiver performance. The
digital IF filter provides flexible filter settings for narrow band signals.
BITE (Built-in Test Equipment) Function
You can check the transceiver’s condition by using the BITE capability. Auto, logic,
receiver, and transmitter are selectable.
Three types of controller configurations are available
to suit almost any use or installation that may be required.
Remote control microphone type*
For even more convenient use
of the radio, especially during
mobile operation.
Detached controller type*
Stow the RF unit in a convenient place
for in-vehicle use or where space is at
a premium.
Controller attached type
Ideal for standard desktop use or
quick set-up in a field station
* For the detached controller and remote control
microphone types, an optional separation cable is required.
(Purchase separately)
South Midlands Communications Ltd. SM House, School Close,
Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND
Tel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]
AUTOMATIC TUNING ANTENNAS
AH-760AH-740
Wide frequency type
Compact type
Two types of high performance, automatic high-speed tuning antennas areavailable.
AH-760, Heavy-duty Moving Coil Antenna
• 200W PEP SSB, 125W PEP CW/DATA
• 1.6MHz–29.999MHz wide frequency coverage with the supplied whip antenna
• 350mS high speed tuning (while memory tuning)
• Tested to IP68 and MIL-STD-810G environmental standards
AH-740, Relay-Driven Compact Antenna
• Relay-driven compact automatic tuning antenna
• Compact and lightweight (3.5kg)
• 150mS typical high speed tuning (while memory tuning)
• Low power consumption (0.4A typical)
NVIS Kit (Option for AH-760 and AH-740)
AH-5NV
AH-5NV NVIS (Near Vertical Incidence Skywave) kit
Fiberglass antenna element (4.5m; 14.8ft) for short range communication within approximately
500km* (* Depending on radio propagation conditions)
SPECIFICATIONS
Frequency coverage
With 1.54m whip antenna
With AH-5NV
Output power rating
VSWR
With 1.54m whip antenna
With AH-5NV
Tuning speed
New channel
Memory tune
Number of memory channels
Operating temperature
Power supply requirement
Power consumption
Tune power
Dimensions (W×H×D)
(Projections not included) Height
(with whip + spring)
Weight (approx.)
Mounting
Environmental test
IP Rating
Supplied accessories
AH-760
AH-740
1.6–29.9999MHz
1.6–16.0000MHz
SSB: 200W PEP*,
CW/DATA: 125W PEP*
2.5–29.9999MHz
2.2–29.9999MHz
SSB/DATA: 125W PEP
1.3:1 typical (50Ω)
1.5:1 typical (50Ω)
1.5:1 typical (50Ω)
1.5:1 typical (50Ω)
2–3 S typical
Less than 1.8 S
150 mS typical
Less than 350 mS
200 channels
45 channels
–40°C to +70°C; –40°F to +158°F
13.8V DC (10.8–15.87V)
1.87A typical (tuning)
0.4A typical
5–15W PEP, Rated 10W PEP
5–15W PEP, Rated 10W PEP
840×100×100 mm;
238×145×160 mm;
33.07×3.94×3.94 in (Base unit)
9.37×5.71×6.3 in (Base unit)
2475 mm; 97.44 in
1909 mm; 75.16 in
5.2kg; 11.5lb
3.5kg; 7.7lb
M16×45mm
M16×45mm
MIL-STD-810-G
MIL-STD-810-G
IP 68 dust-tight and waterproof
IP 55 dust-protection and water jet
resistance
6m; 19.7ft control cable and 6m; 19.7ft coaxial cable
* Maximum 6 minute continuous transmission at 35°C.
AH-760
AH-740
Above photos include mounting bases
for photo shooting.
South Midlands Communications Ltd. SM House, School Close,
Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND
Tel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]
HF TRANSCEIVER PACKAGES
OPTION
1
OPTION
2
OPTION
3
PA2
MOBILE PACKAGE
RADIO IC-78
MOBILE ANTENNA
AUTOMATIC ANTENNA TUNER
VEHICLE INSTALL KIT
BASE STATION
RADIO IC-78
POWER SUPPLY
MAST (PA2)
30mts COAX & PLUGS
ANTENNA (TFDBBE)
Part No: SMCHF/MP1
Part No: SMCHF/BP1
MOBILE PACKAGE
RADIO IC-F7000
AT230 AUTO TUNING ANTENNA
VEHICLE INSTALL KIT
BASE STATION
RADIO IC-F7000
POWER SUPPLY
MAST (PA2)
30mts COAX & PLUGS
ANTENNA (TFDBBE)
Part No: SMCHF/MP2
Part No: SMCHF/BP2
MOBILE PACKAGE
RADIO IC-F8101
AH-760 AUTO TUNING ANTENNA
VEHICLE INSTALL KIT
BASE STATION
RADIO IC-F8101
POWER SUPPLY
MAST (PA2)
30mts COAX & PLUGS
ANTENNA (TFDBBE)
Part No: SMCHF/MP3
Part No: SMCHF/BP3
TFDBBE
South Midlands Communications Ltd. SM House, School Close,
Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND
Tel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]