PAA Part Number Description Thumbnail Price (Ex GST) $6.88

Transcription

11/03/2011
PAA Part Number
B_12V POWER SOCKET
B_ABP - BUILDERS PLATE
B_BAIT BOARD 500 WIDE
B_BAIT BOARD 700 ALUM
B_BAIT BOARD 800 ALUM
B_BAIT BOX LARGE POLY 04-529
B_BAIT BOX SMALL POLY 04-419
Description
12 volt lighter/power socket. A recommended item in any
boat, can be used for spotlight, laptop, radio or phone
charger. Additional sockets placed in fwd cabin or
transom area are also very handy.
A builders plate MUST be fitted to every vessel. Drawings
given with each vessel kit include the hull HIN number
and the data to be engraved into the builders plate. The
correct foam volume must be fitted to the vessel to
comply with basic floatation.
Thumbnail
Price (Ex GST)
$6.88
$18.00
Aluminium bait board kit, 500mm wide including poly
cutting board and 2 rod holders. All parts provided with
welding and assembly instructions.
$125.00
$165.00
$195.00
Large poly roto-moulded storage box, 425 x 170mm
cutout. Comes with hinged lid. Can be fitted into transom
cockpit shelf.
$71.10
Small poly roto-moulded storage box, 270 x 170mm
cutout. Comes with hinged lid. Can be fitted into transom
cockpit shelf.
$45.75
Plate Alloy Australia Pty Ltd. Tel: (03) 9555 6399 Fax: (03) 9555 6499 Website: www.platealloy.com Email: [email protected]
11/03/2011
PAA Part Number
B_BATTERY BOX (STANDARD)
B_BATTERY BOX LARGE
B_BATTERY TRAY LARGE
B_BILGE PUMP TMC 1000GPH 12V
B_BOAT COURSE INTENSIVE
B_BOAT COURSE W/E
B_BOLLARD - 100MM ALLOY
Description
Thumbnail
Price (Ex GST)
Plastic battery box, medium size, with lid. Suits Ideal for
mounting on shelf floor when easy access to barreries is
required. Comes with strap to hold down lid.
$13.60
Plastic battery box, large size, with lid. Suits Ideal for
mounting on shelf floor when easy access to barreries is
required. Comes with strap to hold down lid.
$14.96
Plastic battery tray with plastic screw down posts and
nuts. Ideal for mounting on shelf floor when easy access
to barreries is required.
$13.40
Heavy duty TMC 100gph bilge pump. These pumps are
mounted under the swimdeck in the rear of the boats. The
pumps are mounted on a quick release bottom plate for
quick removal for inspection.
A week long intensive Boat building course. These are
held at our factory in Cheltenham, 4 - 5 times per year.
Monday - Friday 8.00-4.30pm. Course dates are posted
on the website under "Boat Kits" -> "Build Course".
A weekend course in welding and Boat building. These
are held at our factory in Cheltenham, 1 or 2 times per
year. Four consecutive Saturdays 7.00-5.30pm. Course
dates are posted on the website under "Boat Kits" ->
"Build Course".
Cast aluminium bollard to be welded to boat. These can
be positioned where desired. All kits normally mostly 3
cast bollards. Additional bollards can be purchased if
desired.
$46.48
$850.00
$850.00
$15.51
11/03/2011
PAA Part Number
B_BOLLARD SPLIT S.S CAST 84mm
B_BOW SPRIT KIT (ALUM)
B_BUNG BILLY 38mm
Description
These bollards are sometimes fitted at the rear of the bow
sprit in front of the anchor well. This allows the anchor to
be located in position in the sprit and the chain pinned
through this bollard. The bollard can also be used for rope
tie off when the anchor is depolyed.
Aluminium weld on bow sprit made from 8mm material.
Designed to suit most anchors and the kit includes poly
rollers and stainless steel bolts & nuts.
Thumbnail
Price (Ex GST)
$82.47
$75.00
Plastic bung with full seal and self drain function. Suits std
38mm hole and will shut off at rest and drain under way.
$18.00
B_BUNG DRAIN 38mm BLACK
B_BUOYANCY FOAM
B_BURLEY MARLIN BOARD - POLY
B_BUSS BAR BLACK COVER 6 WAY
Standard 38mm drain bung. This bung may be used for
the main keel drain bung and also in other installations
where bungs are required. There are made from plastic.
Survey approved buoyancy foam, in sheets 2000 x 1000 x
50mm thick. Sheet volume is 0.1m3 per sheet. Buoyancy
foam is a requirement for all boats.
Roto-moulded poly burley bucket for mounting on the
marlin board. Comes with aluminium masher with "T"
handle. Builder to check mounting height when fitting, if
unsure ask the staff at Plate Alloy.
Black plastic cover to cover the negative terminals of the
6 way buss bar. These covers protect the active terminals
from accidentally shorting out other electrical components.
$3.50
$50.00
$79.50
$5.36
11/03/2011
PAA Part Number
B_BUSS BAR RED COVER 6 WAY
B_BUSS BAR TERMINAL 6 WAY DBLE
B_COAM 3 ROD RACK _______
B_COAM 4 ROD RACK 05-314
B_COAM 6 ROD RACK 05-350
B_CONS-CLOSED-650
B_CONS-OPEN-1000
Description
Red plastic cover to cover the positive terminals of the 6
way buss bar. These covers protect the active terminals
from accidentally shorting out other electrical components.
These buss bars are fitted as part of our standard
electrical installations. These buss bars have plastic
insulated mounting blocks and optional covers are also
available. Small boats may use 1 of these, larger boats
may use 2 of these units.
Adjustable 3 rod rack with 25mm diameter aluminium
tubes and angle ends. Can be mounted on boat shelf or
on flat surface. These units have slots for the reels which
prevent the rods swivelling.
Thumbnail
Price (Ex GST)
$5.36
$25.85
$25.28
Adjustable heavy duty 4 rod rack with 25mm diameter
aluminium tubes and aluminium angle ends. Can be
mounted on boat shelf or on flat surface.
$72.70
Adjustable heavy duty 6 rod rack with 25mm diameter
aluminium tubes and aluminium angle ends. Can be
mounted on boat shelf or on flat surface.
$90.00
Aluminium kit parts provided for this 650mm wide closed
style centre console, comes with welding and assembly
instructions. Additional elements for fit out are available
from P.A.A.
Aluminium kit parts provided for this 1000mm wide open
type centre console, comes with welding and assembly
from PAA.
$725.00
$995.00
11/03/2011
PAA Part Number
B_CONS-OPEN-700
B_CONS-OPEN-800
B_DASH MODULE 1
B_DOWNRIGGER
B_DOWNRIGGER RELEASE PLATE
B_FIRE / EPIRB BOX
B_FLANGE-RECES. RECT
Description
console comes with welding and assembly instructions.
Additional elements for fit out are available from PAA.
style console, comes with welding and assembly
from PAA.
The aluminium dash module kit has been designed to fit
many of the runabout types of kits or boats with provision
for a dash to be fitted. Made from 3mm aluminium the
module has a removable front plate.
These downriggers are available for addition for those
who enjoy controlled depth fishing with their lures or live
baits. Heavy duty aluminium construction. Include
mounting post to fit in standard rod holder.
Quick release mounting plate designed for the
downriggers. The baseplate can be bolted to the boat and
the downrigger assembly can be quickly "clicked in" on
the quick release mounting plate when required.
A plastic fire extinguisher box normally mounted in the
seat boxes of our vessels. Mostly with larger boats the
hole is pre-cut and these boxes keep extinguisher or epirb
on hand.
Standard rigging flange in a rebated option. This flange
uses standard 63mm O.D rigging hose. These are
normally mounted at or above shelf level on the rear of
the cockpit transom.
Thumbnail
Price (Ex GST)
$675.00
$795.00
$175.00
$413.40
$88.63
$24.95
$7.18
11/03/2011
PAA Part Number
B_FLANGE-ROUND
Description
Thumbnail
Price (Ex GST)
Standard rigging flange in a rebated option. This flange
uses standard 60mm O.D rigging hose.
$26.00
B_FUEL BREATHER
B_FUEL FILLER W/BREATHER-38-16
B_FUEL FILTER KIT - MERC.
B_FUEL HOSE 10MM
B_FUEL HOSE 16MM
B_FUELFILL HOSE 38 CUSTOM
Normally we recommend a combination type filler cap
which includes a tank vent. These individual vents are
used if a custom tank is used or if a stand alone filler is
used. To suit 16mm I.D hose
$8.10
Our standard fuel filler we fit to most of our vessels. This
fuel cap is of the vented type and provides for 38mm filler
and 16mm vent tube fitting.
$35.90
Recommended on all boats is a high quality fuel filter with
clear sediment bowl. These filters have replacement
cartridges available. Fuel fittings included.
$56.60
Approved 10mm fuel line for petrol and diesel use. Sold
by the metre. This fuel line normally suits larger engines
where higher flow is required.
$7.50
Approved 16mm fuel line for petrol and diesel use. This
size is normally used for fuel tank vent tube. Sold by the
metre.
$14.00
Standard custom 38mm fuel filler tube. Suits most boats
with under floor fuel tanks. Specifications, 38mm I.D,
900mm x 300mm 90 degree bend.
$69.80
11/03/2011
PAA Part Number
B_FUEL HOSE 8MM
Description
Thumbnail
Price (Ex GST)
Approved 8mm fuel line for petrol and diesel use. Sold by
the metre.
$6.00
B_FUEL TANK 110L 11-406
B_FUEL TANK 145l 11-900
B_FUEL TANK 200L POLY 11-472
B_FUEL TANK 30L POLY 11-726
This poly tank is suitable for the 5.3m and 5.8m range of
vessels. Supplied tested with sender fitted. Please
discuss tank model before purchase as other sizes may
be available.
This poly tank is suitable for the 6.2m range of vessels.
Supplied tested with sender fitted. Please discuss tank
model before purchase as other sizes may be available.
This slightly larger poly tank is suitable for the 5.3m and
5.8m range of vessels. Supplied tested with sender fitted.
Please discuss tank model before purchase as other sizes
may be available.
$397.50
$414.00
$525.00
$581.25
This poly tank is suitable for the 4m range of vessels.
$264.00
$375.00
11/03/2011
PAA Part Number
B_HATCH- 375 x 280
B_HATCH- 380 x 380
B_HATCH- 600 x 250
B_HATCH- 600 x 360
B_HATCH 500 FRAME - TACKED ALI
B_500 NIBO HATCH 170818
Description
Thumbnail
Price (Ex GST)
$390.00
White plastic storage hatch 375 x 280mm. These hatches
are high quality and U.V stable. Can be positioned where
desired.
$46.95
desired.
$67.20
desired.
$92.40
desired.
$88.60
For fitting the glass opening hatch to your vessel we
supply this tacked together frame ready to weld on. Allows
you to fit flat hatch to curved surface quickly and easily.
$85.00
Our range of runabout, cuddy cab, hardtop and centre
cab vessels have the option of an opening hatch in the
forward area. The hatch is a high quality model with tinted
glass and lockable struts.
$573.10
11/03/2011
PAA Part Number
B_HELMET UMGWH
B_HYD KIT ULTRAFLEX TO 150 Hp
B_HYD.STRAIN RELIEF PAIR.
B_HYDRIVE KIT
B_INSP 6" TEMPRESS PORT SCREW
B_INSP 8" TEMPRESS PORT SCREW
B_INSP. PORT 6" NYLON
Description
A good quality welding helmet with variable shade and
delay. Viewing area 96 x 42 mm, Helmet 9-13 variable,
Reaction time 1-10000 sec, Adjustable Reopening delay
0.1-0.9 sec, 2 year warranty.
Thumbnail
Price (Ex GST)
$130.00
We stock two models of hydraulic steering kits. This
ultraflex kit is an imported unit and is slightly cheaper than
the hydrive model. Suitable for engines up to 150Hp.
$875.81
These strain relievers are used where the hydraulic lines
are fitted through the transom. These fittings avoid kinking
of the hydraulic lines when the steering is moved.
$33.15
Our recommended Australian Made hydraulic helm kit.
Suits engines to 250HP+. These helm units are our
recommended type and are fitted to all the boats we
manufacture.
$1,018.38
There are two types of 6" access port, the nylon std type
or this heavy duty type. This screw in type is very strong,
with a coarse thread.
$19.60
This is the only 8" access port that we stock. This 8"
(250mm), screw in type is very strong, with a coarse
thread.
$32.20
High quality inspection port made from nylon. These are
normally fitted on the swim deck to allow access to the
engine bolts on the outboard.
$15.30
11/03/2011
PAA Part Number
B_INSP. PORT 8"- POLYPROP
B_LED ANCHOR 230 FOLD
B_LED ANCHOR 42" SOCKET
B_LED EXTER. LAMP NO S/W
B_LED INT LAMP W/SWITCH
B_LED SHELF LIGHT
B_LED WORK LIGHT - 6 LEDS
Description
Standard 8" inspection port made from polypropylene.
These are normally fitted on the swim deck to allow
access to the engine bolts on the outboard.
This folding anchor light is normally used on larger boats
when fitted to the cabin top or top of rocket launcher or
"T" top. LED technology has low power consumption.
This folding anchor light is normally used on smaller boats
when fitted to the gunnel. The pole is removable with a
clip in connector when required. LED technology has low
power consumption.
Thumbnail
Price (Ex GST)
$7.48
$43.20
$59.20
Internal LED lamp - ideal for inside cabins etc. Note:
Switch required for illumination. LED technology has low
power consumption.
$62.40
Internal LED lamp - ideal for inside cabins etc. This light
has night function inbuilt. Note: Switch included in lamp.
LED technology has low power consumption.
$102.67
Standard under shelf LED lamp. These lights clip into
standard aluminium brackets that come with most boat
kits. LED technology has low power consumption
$12.64
Waterproof LED light in a waterproof enclosure, suitable
for outdoor fitting. These lights have 6 LED lamps and are
mounted in a heavy duty aluminium casing. LED
technology has low power consumption.
$97.20
11/03/2011
PAA Part Number
B_LIVE BAIT TANK GHP 04-315
B_LIVEWELL BLUE
B_LIVEWELL WHITE LAMP LED
B_MUIR DFF08 KIT
B_MUIR DFF10 KIT
B_MUIR HFF600 KIT
B_NAV LIGHTS P & S - LED
Description
This live bait tank is designed to be fitted to the vessel
when required. Many anglers do not live bait fish all the
time, so it is convenient to fit the tank when required,
normally on the starboard side of cockpit transom.
These led lamps are low voltage and sealed for
underwater use to 1m. Ideal for livewell tanks, and these
lamps are available in white or blue. LED technology has
low power consumption.
These led lamps are low voltage and sealed for
underwater use to 1m. Ideal for livewell tanks, and these
lamps are available in white or blue. LED technology has
low power consumption.
These Australian Made drum winches are of the free fall
type. The DFF08 will suit boats from 5 - 8 metres. This
winch is a free fall type unit. Note: Winch only rope &
chain not included.
These Australian Made drum winches are of the free fall
type. The DFF10 will suit boats from 7 - 10 metres. This
winch is a free fall type unit. Note: Winch only rope &
chain not included.
The Muir HFF600 free fall winch is suitable for use on
vessels from 5m to 10m. The winches are above deck
mounted and include a free fall feature. These winches
are Australian Made and this model INCLUDES 50m rope
and chain.
These LED navigation lights are used on all boats. The
lights are of the LED type and are white in color. LED
technology has low power consumption
Thumbnail
Price (Ex GST)
$277.50
$7.00
$7.00
$2,548.00
$2,963.00
$1,251.90
$38.40
11/03/2011
PAA Part Number
B_PEDESTAL FIXED 450MM
B-PEDESTAL MOUNTING PLATE 8MM
B_RIGGING 60 HOSE
B_ROLD HOLDER ALLOY WELDON
B_4 GANG S/W PANEL
Description
Thumbnail
Price (Ex GST)
This budget priced pedestal has a sold mount and the top
bracket can take most seat mounting plates for slider or
swivel.
$86.68
This 8mm aluminium pedestal mounting plate was
developed for welding to the deck to allow threaded
attachment of the pedestal.
$18.40
U.V stabilised black flexible rigging hose sold by the
metre. Used with either round flange or rectangular flange
connector.
$25.00
These aluminium weld on rod holders are of heavy duty
type with slot pin at the base. Material is cast aluminium
and may be welded to the boat where desired.
$22.50
All boats require switch panels. This 4 gang may be ideal
for smaller boats or 2 x 4 gang panels on larger boats.
$78.46
B_6 GANG S/W PANEL
All boats require switch panels. This 6 gang may be ideal
for smaller boats or 2 x 6 gang panels on larger boats.
$103.10
B_SAFRA-1.2/5356
The wire we recommend for the welding of all of our boat
kits. This is a premium grade 5356 aluminium welding
wire of 1.2mm diameter. This wire has excellent tolerance
for optimum feeding.
$105.00
11/03/2011
PAA Part Number
B_SCREEN 4 PC. ALFAB
B_SCREEN 5 PC.ALFAB
B_SCUPPER LARGE
B_SCUPPER SMALL
B_SEAT FOLD CHAR/GREY NAVI
B_SEAT HI BACK ELITE CHAR/GRY
B_VSR 125A W SWITCH
Description
Curved glass windscreen kit, 4 piece, with side panels
fitted with acrylic inserts. All windscreens come with
anodised aluminium silver frames. Kit includes frames
and trim inserts.
Curved glass windscreen kit, 5 piece, with side and centre
panels fitted with acrylic inserts. All windscreens come
with anodised aluminium silver frames. Kit includes
frames and trim inserts.
Thumbnail
Price (Ex GST)
$1,209.00
$1,341.00
Aluminium scupper vent (large) as supplied with our kits.
Most kits use these large scuppers. They are included in
the kits. They can also be used as a roof vent if desired.
$78.33
Aluminium scupper vent (small) as supplied with our kits.
These smaller sized scuppers are used only on our
smaller boats. They are included in the kits
$71.60
These seats are the best and most comfortable that we
have been able to find. Made in America, they are
upolstered in high quality vinyl and are extremely
comfortable. These folding seats are grey/charcoal in
color.
These seats are the best and most comfortable that we
have been able to find. Made in America, they are
upolstered in high quality vinyl and are extremely
comfortable. These seats are grey/charcoal in color.
The VSR is a battery switch which can be used to connect
to two batteries and charge or discarge either battery by
switch selection. It is recommended for use on boats with
twin battery systems.
$164.58
$345.00
$153.98
11/03/2011
PAA Part Number
B_WHEEL-SPORT BLK ALLOY 310MM
B_WLD-250 MULTI PULSE
B_WLD-SNAKE 6M KEMMPI
B_WLD 250 INVERTER UNIMIG
Description
This is our choice for high quality steering wheel. Size is
310mm across the diameter. This wheel has an
aluminium centre with plastic rim. Includes boss cover
cap.
The ultimate machine for the home boat builder. This
pulse machine operates on 240 Volts with 250 amps of
power. The machine has a digital interface and has
features of machines 5 times the price including double
pulse welding.
These snake welding guns are very useful when boat
building. The 6m torch enables the builder to move
around the boat for welding without moving the welding
machine. Lightweight torch with Euro fitting.
A great value MIG welder for the home builder. This
inverter type machine will weld aluminium to 8mm and
includes 3m gun and aluminium setup.
Thumbnail
Price (Ex GST)
$122.50
$3,280.00
$830.00
$1,699.00

PAA Part Number Description Thumbnail Price (Ex GST) $6.88

Transcription

Similar documents

www.alubond.com Aluminium composite panels for facade cladding

Matt Haigh – Planet-X Stealth Pro-Carbon

impressions - Polychromal

Avdel avex rivet

week2-leticia.dadalto

RV Camping Checklist

Ref: SA0153 Spacious City Center Flat, Alicante

kappa adventure range leaflet

hearts aflutter tank top

325-alvin