Telemecanique sensors
Transcription
Telemecanique sensors
Telemecanique sensors Telemecanique sensors Sensors Telemecanique Safety sensing Safety Sensing Guide Safety sensing Panorama Panorama SimplySimply easy!easy! TM Simply easy! TM Safety interlocking switches Choose : 1 Body > 2 Function > 3 Contact > > 4 Reference Connection For industrial machines with inertia XCSLF Locks on de-energisation of solenoid (1) 205 Metal 51 146 XCSE 2NC Slow NC+2NO Slow 2NC+NO Slow NC+NO Slow 2NC Slow NC+2NO Slow 2NC+NO Slow 3NC Slow ISO M20 XCSLF2525312 XCSLF2727312 XCSLF3535312 XCSLF3737312 XCSLF3838312 3NC Slow XCSLF2727313 XCSLF3535313 XCSLF3737313 XCSLF3838313 M23 connector XCSLF252531M2 XCSLF272731M2 XCSLF353531M3 XCSLF373731M3 XCSLF383831M3 ISO M20 XCSLF3535412 1/2"NPT XCSLF3737412 XCSLF3737413 M23 connector XCSLF353541M3 XCSLF373741M3 Safety contacts (2) NC+2NO Slow 2NC+NO Slow 3NC Slow Solenoid contacts NC+NO Slow NC+NO Slow NC+NO Slow ISO M20 XCSE5312 XCSE7312 XCSE8312 Pg13.5 XCSE5311 XCSE7311 XCSE8311 1/2"NPT XCSE5313 XCSE7313 XCSE8313 Locking on de-energisation of solenoid (1) Metal 44 NC+NO Slow Solenoid contacts 1/2"NPT Locking on de-energisation of solenoid with emergency by mushroom head pushbutton (1) 43.5 Safety contacts (2) (1) To choose the type of key actuator, please refer to Accessories (2) Schematic diagrams shown at the bottom of this page represent the contact states while the actuator is inserted in the head of the switch. 98 113.5 For industrial machines without inertia XCSA 44 113.5 XCSB 2NC+NO Slow 3NC Slow XCSA502 XCSA702 XCSA802 Pg13.5 XCSA501 XCSA701 XCSA801 1/2"NPT XCSA503 XCSA703 XCSA803 Safety contacts (2) NC+2NO Slow 2NC+NO Slow 3NC Slow M20 XCSB502 XCSB702 XCSB802 Manual unlocking by button (1) Metal 44 NC+2NO Slow ISO M20 Without locking of the actuator (1) Metal 40 Safety contacts (2) Pg13.5 XCSB501 XCSB701 XCSB801 1/2"NPT XCSB503 XCSB703 XCSB803 Safety contacts (2) NC+2NO Slow 2NC+NO Slow 3NC Slow M20 XCSC502 XCSC702 XCSC802 Pg13.5 XCSC501 XCSC701 XCSC801 1/2"NPT XCSC503 XCSC703 XCSC803 52 113.5 XCSC Manual unlocking by key lock (1) Metal 44 (1) To choose the type of key actuator, please refer to Accessories (2) Schematic diagrams shown at the bottom of this page represent the contact states while the actuator is inserted in the head of the switch. 52 Accessories for safety interlocking switches Key actuator Straight key actuator Key actuator with mounting bracket Pivoting key actuator Key actuator with latch for sliding doors XCSLF, XCSE, XCSA, XCSB & XCSC XCSZ01 XCSZ02 XCSZ03 XCSZ05 Connection information ISO M20 Tapped M20x1.5 for ISO cable gland Pg13.5 Tapped for a N°13 cable gland 1/2" NPT Tapped for a 1/2" NPT 5 1 2 4 3 Slow 2NC+NO 11 3 1 5 11 4 2 21 31 Slow NC+2NO 32 22 11 Slow 3NC 12 31 13 14 32 21 Slow 2NC+NO 22 13 33 34 14 21 Slow NC+2NO 22 21 22 11 Slow 2NC 12 21 22 14 13 Slow NC+NO M23 to XCSLF***M2 products M23 to XCSLF***M3 products Connector M23, 16 pin Connector M23, 19 pin Cabling XCS M23 Connectors (female) straight elbowed 16 pin XZCC23FDM160S XZCC23FCM160S 19 pin XZCC23FDM190S XZCC23FCM190S Safety interlocking switches Choose : 1 Body > 2 Function > > 3 Contact > 4 Reference Connection For light machines with inertia XCSLE Locking on de-energisation of solenoid (1) 205 Plastic Safety contacts (2) NC+NO Slow 2NC Slow NC+2NO Slow 2NC+NO Slow Solenoid contacts NC+NO Slow 2NC Slow NC+2NO Slow 2NC+NO Slow 3NC Slow ISO M20 XCSLE2525312 XCSLE2727312 XCSLE3535312 XCSLE3737312 XCSLE3838312 1/2"NPT 51 XCSTE Locking on de-energisation of solenoid (1) 93.5 Plastic 37 XCSLE2727313 M23 connector 43.5 110 3NC Slow XCSLE252531M2 XCSLE272731M2 XCSLE353531M3 XCSLE373731M3 XCSLE383831M3 Safety contacts (2) NC+NO Slow Solenoid contacts NC+NO Slow 2NC Slow 2NC Slow ISO M16 XCSTE5312 XCSTE7312 Pg11 XCSTE5311 XCSTE7311 1/2"NPT XCSTE5313 XCSTE7313 (1) To choose the type of key actuator, please refer to Accessories (2) Schematic diagrams shownat the bottom of this page represent the contact states while the actuator is inserted in the head of the switch. 93.5 For light machines without inertia XCSPA Without looking of the actuator (1) Plastic 30 Safety contacts (2) NC+NO Slow 2NC Slow NC+2NO Slow 2NC+NO Slow ISO M16 XCSPA592 XCSPA792 XCSPA892 XCSPA992 Pg11 XCSPA591 XCSPA791 XCSPA891 XCSPA991 1/2"NPT XCSPA593 XCSPA793 XCSPA893 XCSPA993 Safety contacts (2) NC+2NO Slow 2NC+NO Slow 3NC Slow ISO M16 XCSTA592 XCSTA792 XCSTA892 Pg11 XCSTA591 XCSTA791 XCSTA891 1/2"NPT XCSTA593 XCSTA793 XCSTA893 30 XCSTA Without looking of the actuator (1) 114.5 Plastic 30 52 XCSM Without looking of the actuator (1) 78 Plastic 30 15 Safety contacts (2) NC+NO Slow 2NC Slow 2NC+NO Slow 3NC Slow Cable 2 m XCSMP59L2 XCSMP79L2 XCSMP70L2 XCSMP80L2 Cable 5 m XCSMP59L5 XCSMP79L5 XCSMP70L5 XCSMP80L5 Cable 10 m XCSMP59L10 XCSMP79L10 XCSMP70L10 XCSMP80L10 (1) To choose the type of key actuator, please refer to Accessories (2) Schematic diagrams shown at the bottom of this page represent the contact states while the actuator is inserted in the head of the switch. Accessories for safety interlocking switches Key actuator Straight key actuator Key actuator with mounting bracket Pivoting key actuator XCSLE XCSZ01 XCSZ02 XCSZ03 XCSTE, XCSPA, XCSTA XCSZ11 XCSZ12 XCSZ13 XCSMP XCSZ81 XCSZ84 XCSZ83 (1) (1) The key actuator XCSZ83 can be used just for right-hand doors. To ordered for left-hand doors, the reference will be XCSZ85. Connection information ISO M16 Tapped M16x1.5 for ISO cable gland ISO M20 Tapped M20x1.5 for ISO cable gland Pg11 Tapped for a N°11 cable gland Pg13.5 Tapped for a N°13 cable gland 1/2" NPT Tapped for a 1/2" NPT 5 1 2 4 3 Slow 2NC+NO 11 3 1 5 11 4 2 21 31 Slow NC+2NO 32 22 11 Slow 3NC 12 31 13 14 32 21 Slow 2NC+NO 22 13 33 34 14 21 Slow NC+2NO 22 21 22 11 Slow 2NC 12 21 22 14 13 Slow NC+NO M23 to XCSLE***M2 products M23 to XCSLE***M3 products Connector M23, 16 pin Connector M23, 19 pin Cabling XCS M23 Connectors (female) straight elbowed 16 pin XZCC23FDM160S XZCC23FCM160S 19 pin XZCC23FDM190S XZCC23FCM190S Safety switches with rotary lever Choose : 1 Body > 2 Function > 3 Contact > 4 > Reference Connection For light machines without inertia fitted with hinged doors, covers or protective guards or XCSPL Plastic ISO M16 Safety contacts (1) Elbowed lever, operator to left Elbowed lever, operator to center Elbowed lever, operator to right Straight lever, right or left operator(2) Straight lever, operator to center NC+NO slow XCSPL592 XCSPL582 XCSPL572 XCSPL562 XCSPL552 2NC slow XCSPL792 XCSPL782 XCSPL772 XCSPL762 XCSPL752 XCSPL862 88 NC+2NO slow XCSPL962 2NC+NO slow 30 Pg11 30 NC+NO slow XCSPL591 XCSPL581 XCSPL571 XCSPL561 XCSPL551 2NC slow XCSPL791 XCSPL781 XCSPL771 XCSPL761 XCSPL751 XCSPL981 2NC+NO slow 1/2"NPT NC+NO slow XCSPL593 XCSPL583 XCSPL573 XCSPL563 XCSPL553 2NC slow XCSPL793 XCSPL783 XCSPL773 XCSPL763 XCSPL753 or XCSTL Plastic 108 ISO M16 30 Pg11 52 1/2"NPT (3) Safety contacts (1) Elbowed lever, operator to left Elbowed lever, operator to center Elbowed lever, operator to right Straight lever, right or left operator(2) Straight lever, operator to center NC+2NO slow XCSTL592 XCSTL582 XCSTL572 XCSTL562 XCSTL552 2NC+NO slow XCSTL792 XCSTL782 XCSTL772 XCSTL762 XCSTL752 3NC slow XCSTL892 XCSTL882 XCSTL872 XCSTL862 XCSTL852 NC+2NO slow XCSTL591 XCSTL581 XCSTL571 XCSTL561 XCSTL551 2NC+NO slow XCSTL791 XCSTL781 XCSTL771 XCSTL761 XCSTL751 3NC slow XCSTL891 XCSTL881 XCSTL871 XCSTL861 XCSTL851 XCSTL783 XCSTL773 XCSTL763 XCSTL753 XCSTL883 XCSTL873 XCSTL583 NC+2NO slow XCSTL793 2NC+NO slow 3NC slow NC+NO Slow 2NC Slow ISO M16 XCSPR552 XCSPR752 Pg11 XCSPR551 XCSPR751 1/2"NPT XCSPR553 XCSPR753 NC+2NO Slow 2NC+NO Slow XCSPR952 XCSPR851 XCSPR951 (1) Schematic diagrams shown at the bottom of this page represent the contact states while the spindle is the rest position. (2) For switches with 80 mm spindle, replace the 2nd number in the reference by 6. Ex: XCSPR562. XCSTR Safety contacts (1) NC+2NO Slow 2NC+NO Slow 3NC Slow Plastic ISO M16 XCSTR552 XCSTR752 XCSTR852 Pg11 XCSTR551 XCSTR751 XCSTR851 1/2"NPT (3) XCSTR553 XCSTR753 XCSTR853 Spindle length 30 mm (2) (1) Schematic diagrams shown at the bottom of this page represent the contact states while the spindle is the rest position. (2) For switches with 80 mm spindle, replace the 2nd number in the reference by 6. Ex: XCSTR562 (3) Supply with one metal adaptor DE9RA1012 (Pg11 1/2"NPT) & one blanking plug. For a second 1/2"NPT conduit entry please order a second adaptor. 13 33 21 31 13 11 21 31 22 32 14 12 22 32 21 22 Slow 3NC 34 21 Slow / Snap 2NC+NO 14 11 Slow NC+2NO 22 Slow 2NC 12 Slow NC+NO 13 Connection information ISO M16 Tapped M16x1.5 for ISO cable gland Pg11 Tapped for a N°11 cable gland 1/2" NPT Tapped for a 1/2" NPT 21 52 Spindle length 30 mm (2) 14 30 Safety contacts (1) 30 117 30 XCSPR Plastic 22 96 (1) Schematic diagrams shown at the bottom of this page represent the contact states while the lever is in the rest position. (2) To change the operator from right to left, rotate the turret head by 180°. (3) Supply with one metal adaptor DE9RA1012 (Pg11 1/2"NPT) & one blanking plug. For a second 1/2"NPT conduit entry please order a second adaptor. XCSTL 2NC+NO slow XCSTL783 XCSTL77 (3) Supply with one metal adaptator DE9RA1012 (Pg11XCSTL793 1/2"NPT) and one blanking plug. For a second 1/2"NP 3NC slow XCSTL883 XCSTL87 Safety contacts Elbowed lever, Elbowed lever, Elbowed lev Safety limit switches (1) operator towhilst left theoperator operator to ri the contact states lever is to in centre the rest position. Plastic (1) Schematic diagrams shown represent 108 (2) To change the operator from right to left, rotate the turret head by 180°. NC+2NO slow XCSTL582 XCSTL57 (3) SupplyISO withM16 one metal adaptator DE9RA1012 (Pg11XCSTL592 1/2"NPT) and one blanking plug. For a second 1/2"NP 2NC+NO slow XCSTL792 XCSTL782 XCSTL77 XCSTL Safety NC+NO Slow 2NC Slow NC+2NO Slo XCSPR Safetycontacts contacts(1) Elbowed lever, Elbowed lever, Elbowed lev Function > Contact > 4 > 30 96 > 3 Reference Plastic Spindle length 30 mm (2) ISO M16 Pg11 (1) operator to left XCSTL892 3NC M16 slow ISO XCSPR552 XCSTL592 XCSTL591 XCSPR551 operator to centre XCSTL882 operator to ri XCSTL87 XCSPR752 XCSTL582 XCSTL581 XCSPR751 XCSTL57 XCSPR85 XCSTL792 XCSTL782 XCSTL77 XCSTL791 XCSTL781 NC+NO Slow 2NC Slow NC+2NO Slo XCSPR553 XCSPR753 XCSPR 30 30 3NC slow XCSTL892 XCSTL882 XCSTL87 (1) Schematic diagrams shown represent the contact states whilst the spindle is the rest position. XCSTL891 XCSTL881 ISO M16 XCSPR552 XCSPR752 Plastic Spindle length 30 (2) For switches with 80 mm spindle, replace the 2nd number in the reference by 6. Ex: XCSPR562. 30Pg11 mm (2) NC+2NO 1/2"NPT (3) XCSTL591 XCSTL581 XCSTL57 XCSTL583 Pg11slow XCSPR551 XCSPR751 XCSPR85 52 2NC+NO slow XCSTL791 XCSTL781 XCSTL77 XCSTL793 XCSTL783 1/2"NPT XCSPR553 XCSPR753 30 Safety contacts (1) NC+2NO Slow 2NC+NO Slow 3NC Slow XCSTR 3NC slow 30 XCSTL891 XCSTL881 XCSTL87 XCSTL883 (1) Schematic diagrams shown represent the contact states whilst the spindle is the rest position. nd ISO M16 XCSTR552 XCSTR752 XCSTR85 Plastic (1) in the reference 6. rest Ex: XCSPR562. (2) Schematic ForSpindle switches with 80 shown mm spindle, replace the 2 number length diagrams represent states whilst the lever is inbythe position. NC+2NO slowthe contact 1/2"NPT (3) XCSTL583 30 mmthe (2) operator from right Pg11 XCSTR551 XCSTR751 XCSTR85 (2) To change to left, rotate the turret head by 180°. 2NC+NO slow XCSTL793 XCSTL783 XCSTL77 (3) Supply with one metal adaptator DE9RA1012 (Pg11 1/2"NPT) and one blanking plug. For a second 1/2"NP 30 Safety contacts (1) NC+2NO Slow 2NC+NO Slow 3NC Slow 1/2"NPT (3) XCSTR553 XCSTR753 XCSTR85 XCSTR 52 3NC slow XCSTL883 XCSTL87 Schematic diagrams shownISO represent states whilst the XCSTR752 spindle is the rest position. M16 the contact XCSTR552 XCSTR85 Plastic (1) Spindle length (1) Schematic diagrams represent the contact states whilst the lever is inbythe position. in the reference 6. rest Ex: XCSTR562 (2) For switches 80 shown mm spindle, replace the 2nd number 30 mmthe (2)with (2) To change operator from right to left, rotate the turret head by 180°. Pg11 XCSTR551 XCSTR751 XCSTR85 (3) Supply with one metal adaptator DE9RA1012 (Pg11 1/2"NPT) and one blanking plug. For a second 1/2"NP (3) Supply with one metal adaptator DE9RA1012 (Pg11 1/2"NPT) and one blanking plug. For a second 1/2"NP 30 1/2"NPT (3) XCSTR553 XCSTR753 XCSTR85 52 Safety contacts (1) NC+NO Slow 2NC Slow NC+2NO Slo XCSPR (1) Schematic diagrams shown represent the contactroller states whilst the spindle the rest position. Type of operator Metal end plunger Steel roller plunger Thermoplastic lever Steel roller is lever nd Connection information number in the reference by 6. Ex: XCSTR562 (2) ForSpindle switches with 80 mm spindle, replace the 2 ISO M16 XCSPR552 XCSPR752 Plastic length ISO M20 XCSD3910P20 XCSD3902P20 XCSD3918P20 XCSD3919P20 SlowDE9RA1012 Slow Slow Slow / Snap Slow ISO M16 Tapped M16x1.5 for(3) Supply (Pg11 1/2"NPT) and one blanking plug. For a second 1/2"NP ISO cable gland 30with mmone (2) metal adaptator NC+NO NC+2NO 2NC+NO Pg11 2NC XCSPR551 XCSPR751 3NC XCSPR85 Pg13.5 XCSD3910G13 XCSD3902G13 XCSD3918G13 XCSD3919G13 Pg11 Tapped for a N°11 cable gland Safety contacts (1) NC+NO Slow 2NC Slow NC+2NO Slo 1/2"NPT XCSPR XCSPR553 XCSPR753 1/2" NPT a 1/2" NPT 1/2» NPT Tapped for XCSD3910N12 30 XCSD3902N12 XCSD3918N12 XCSD3919N12 30 Connection information (1) Schematic diagrams shown represent the contact states whilst the spindle is the rest position. ISO M16 XCSPR552 XCSPR752 Plastic Spindle length ISO M20 XCSD3710P20 XCSD3702P20 XCSD3718P20 XCSD3719P20 Slow Slow / Snapby 6. Ex: Slow number in theSlow reference XCSPR562. For switches spindle, replace the 2ndSlow ISO M16 Tapped M16x1.5 for(2) ISO cable 30 gland mm (2)with 80 mmNC+NO Pg11 2NC NC+2NO 2NC+NO XCSPR551 XCSPR751 3NC XCSPR85 Pg13.5 XCSD3710G13 XCSD3702G13 XCSD3718G13 XCSD3719G13 Pg11 Tapped for a N°11 cable gland 1/2"NPT XCSPR553 XCSPR753 1/2" NPT 1/2» NPT Tapped for 30 a 1/2" NPT XCSD3710N12 XCSD3702N12 XCSD3718N12 XCSD3719N12 Safety contacts (1) NC+2NO Slow 2NC+NO Slow 3NC Slow XCSTR 30 (1) Schematic diagrams shown represent the contact states whilst the spindle is the rest position. nd ISO M16 XCSTR752 XCSTR85 Plastic (2) ForSpindle number in the reference by 6. Ex: XCSPR562. switches with 80 mm spindle, replace the 2XCSTR552 length 52 Connection NC+2NO Pg11slow 2NC+NO slow(1) Safety contacts 1/2"NPT 96 Body 2 108 Choose : 1 117 31 13 11 21 31 14 12 22 32 21 22 32 13 33 34 13 11 21 31 12 22 32 21 22 14 33 34 31 13 14 32 21 22 XCSTR751 XCSTR85 2NC+NO Slow XCSTR753 3NC Slow XCSTR85 diagrams shownISO represent states whilst the XCSTR752 spindle is the rest position. M16 the contact XCSTR552 XCSTR85 Plastic (1) Schematic Spindle length (2) For switches replace the 2nd number in the reference by 6. Ex: XCSTR562 30 mm (2)with 80 mm spindle, Pg11 XCSTR751 XCSTR85 (3) Supply with one metal adaptator DE9RA1012 (Pg11XCSTR551 1/2"NPT) and one blanking plug. For a second 1/2"NP 1/2"NPT (3) XCSTR553 XCSTR753 XCSTR85 52 (1) Schematic diagrams shown represent the contactroller states whilst the spindle the rest position. Metal end plunger Steel roller plunger Thermoplastic lever Steel roller is lever Connection information (2) For switches with 80 mm spindle, replace the 2nd number in the reference by 6. Ex: XCSTR562 ISO M20 XCSP3910P20 XCSP3902P20 XCSP3918P20 XCSP3919P20 SlowDE9RA1012 Slow(Pg11 1/2"NPT) Slow Slow / Snap Slow Supply one metal adaptator and one blanking plug. For a second 1/2"NP ISO M16 Tapped M16x1.5 for(3) ISO cablewith gland NC+NO 2NC NC+2NO 2NC+NO 3NC Pg13.5 XCSP3902G13 XCSP3918G13 XCSP3919G13 Pg11 Tapped for XCSP3910G13 a N°11 cable gland 1/2» NPT Tapped for XCSP3910N12 1/2" NPT XCSP3902N12 XCSP3918N12 XCSP3919N12 a 1/2" NPT Connection information ISO M20 XCSP3710P20 XCSP3702P20 XCSP3718P20 XCSP3719P20 Slow Slow Slow Slow / Snap Slow ISO M16 Tapped M16x1.5 for ISO cable gland NC+NO 2NC NC+2NO 2NC+NO 3NC Pg13.5 XCSP3710G13 XCSP3702G13 XCSP3718G13 XCSP3719G13 Pg11 Tapped for a N°11 cable gland 1/2" NPT 1/2» NPT Tapped for XCSP3710N12 a 1/2" NPT XCSP3702N12 XCSP3718N12 XCSP3719N12 50 30 Safety contacts (1) Type of operator Metal end plunger Steel roller plunger Thermoplastic roller lever Steel roller lever 2NC+NO Slow Cable 1m XCSM3710L1 XCSM3702L1 XCSM3715L1 XCSM3716L1 Cable 2m XCSM3710L2 XCSM3702L2 XCSM3715L2 XCSM3716L2 Cable 5m XCSM3710L5 XCSM3702L5 XCSM3715L5 XCSM3716L5 Cable 1m XCSM4110L1 XCSM4102L1 XCSM4115L1 XCSM4116L1 Cable 2m XCSM4110L2 XCSM4102L2 XCSM4115L2 XCSM4116L2 Cable 5m XCSM4110L5 XCSM4102L5 XCSM4115L5 XCSM4116L5 2NC+2NO Snap 32 (1) Schematic diagrams shown at the bottom of this page represent the contact states while the actuator is the rest position. BN RD-WH GN-YE BK-WH BN VT-WH GN-YE RD-WH Terminals XCSD/P Snap Slow 2NC+1NO 2NC+1NO BU BK RD BU VT RD BK Cable XCSM Snap Slow 2NC+2NO 2NC+1NO BK-WH Connection information ISO M20 Tapped M20x1.5 for ISO cable gland Pg13.5 Tapped for a N°13 cable gland 1/2" NPT Tapped for a 1/2" NPT 31 32 31 32 XCSM Metal 21 22 21 22 12 11 12 11 13 14 13 14 21 31 32 22 31 21 22 32 33 33 34 34 13 21 13 14 14 21 22 22 21 11 12 22 21 11 22 12 13 21 13 21 34 14 14 2NC+NO Slow 22 65 21 21 22 21 22 XCSTR551 NC+2NO Slow XCSTR553 Type of operator 2NC+NO Snap 34 Pg11 Safety contacts 1/2"NPT (3) (1) 22 Plastic XCSTR 52 30 Safety contacts (1) 14 11 12 11 12 30 mm (2) 30 XCSP 22 13 21 14 22 34 117 34 13 2NC+NO Slow 21 65 2NC+NO Snap 14 Safety contacts (1) 22 Metal 96 XCSD 96 117 117 For industrial and Light machines without inertia for monitoring access guards Safety magnetic switches Choose : 1 Body > 2 > Operating zone 3 > contact or safety level 4 > Reference Connection For industrial machines without inertia with imprecise guidance and frequent washing Coded magnetic switches XCSDMR XCSDMR5912 XCSDMR7912 M12 4P XCSDMR591L01M12 XCSDMR791L01M12 88 GY WH BN BU 2NC BK NC + NO Contact (1NC+2NO, 1NO staggered) XCSDMC5912 XCSDMC7912 M8 4P XCSDMC591L01M8 XCSDMC791L01M8 Safety contacts (2) NC + NO 2NC NC + 2NO 2NC + NO Cable 2 m (3) XCSDMP5902 XCSDMP7902 XCSDMP5002 XCSDMP7002 M12 4P or 8P (4) XCSDMP590L01M12 XCSDMP790L01M12 XCSDMP500L01M12 XCSDMP700L01M12 Cable 2 m (3) XCSDMP5912 M12 4P or 8P (4) XCSDMP591L01M12 BN Cable 2 m (3) BU XCSDMC790L01M8 GY XCSDMC7902 XCSDMC590L01M8 WH XCSDMC5902 M8 4P BK Cable 2 m (3) XCSDMP Contact (2NC+1NO, 1NC staggered) Operating zone (1) Sao: 8 mm / Sar: 20 mm Plastic Without LED 25 Contact (2NC staggered) PK Safety contacts (2) Without LED 16 BN Cable 2 m (3) WH XCSDMR790L01M12 BU XCSDMR7902 XCSDMR590L01M12 Contact (1NC+1NO staggered) Operating zone (1) Sao: 5 mm / Sar: 15 mm Plastic With LED 13 XCSDMR5902 M12 4P XCSDMC 51 7 Cable 2 m (3) BN With LED 2NC WH Without LED NC + NO BU Safety contacts (2) BK Plastic BK Operating zone (1) Sao: 8 mm / Sar: 20 mm PK M30x38.5 With LED XCSDMP791L01M12 XCSDMP5012 XCSDMP7012 XCSDMP501L01M12 XCSDMP701L01M12 (1) Sao: Assured operating distance; Sar: Assured tripping distance (2) Schematic diagrams shown at the bottom of this page represent the contact states while the magnet is in front of the switch. (3) For switches with other cable lengths, replace the last number in the reference by 5 for 5 meters or 10 by 10 meters. Ex: XCSDMC5905 (4) M12 4P for XCSDMP59/79 ( 2 contacts), M12 8P for XCSDMP50/70 (3 contacts) 100 XCSDM Plastic 32 M12 connector (A coding) Coded magnetic system Operating zone (1) Sao: 10 mm / Sar: 20 mm 2 solid-state PNP type outputs (OSSD) 34 With LED SIL 2, PLd, Category 3 SIL 3, PLe, Category 4 Cable 2 m XCSDM379102 XCSDM480102 Cable 5 m XCSDM379105 XCSDM480105 Cable 10 m XCSDM379110 XCSDM480110 M12 8P A coding XCSDM3791M12 XCSDM4801M12 F1 1/BN F1 + 2A I1 7/GY + 1/BN XCSDM3 NO O1 4/BK NO I2 6/PK + NO O2 2/WH K2 Diag K1 6 4 7 3/BU – NO 2A + + XCSDM4 Er 7/VT I1 5/GY + O1 4/BK I2 6/PK + O2 2/WH K2 6 K1 3 1 2 3/BU 8/OG 5 4 7 3 1 8 2 – + K2 K1 (1) Sao: Assured operating distance; Sar: Assured tripping distance Accessories for Safety magnetic switches Pre-wired female connectors Straight M8 4 pin M12 8 pin M12 4 pin M12 8 pin (A coding) 2m XZCP0941L2 XZCP29P11L2 XZCP1141L2 XZCP29P12L2 5m XZCP0941L5 XZCP29P11L5 XZCP1141L5 XZCP29P12L5 10 m XZCP0941L10 XZCP29P11L10 XZCP1141L10 XZCP29P12L10 Safety light curtains Safety light curtains Choose : 1 :> 2> >2 3> >3 4> >4 > Choose Standard type 1 & detection Height Sensing Embedded functionsFunction Standardprotected type Heightrange Sensing capacity and protected range detection capacity XUSL Reference Reference Type 4 XUSLBhandType Finger, and4 body detection Finger and Hand protections Type 4 XUSLP Type 2 XUSL Body protections Height protected Height protected (mm) Finger detection (detection capability 14 mm) Finger protection (detection capacity 14 selectable mm) Sensing distance 0…3m or 1…6m Sensing distance 0.5 to 7 m Automatic ordistance manual0.5 start/restart Sensing to 8 m 280 mm XUSLBQ6A0280 External Device Monitoring (EDM) 160 320 mm XUSL4E14F016N XUSLBQ6A0320 XUSL4E30H016N XUSLBR5A0320 260 360 mm XUSL4E14F026N XUSLBQ6A0360 XUSL4E30H026N XUSLBR5A0360 310 440 mm XUSL4E14F031N XUSLBQ6A0440 XUSL4E30H031N XUSLBR5A0440 460 520 mm XUSL4E14F046N XUSLBQ6A0520 XUSL4E30H046N XUSLBR5A0520 510 - 2 mm beams 600 XUSLBQ6A0600 XUSLBR5A0600 610 680 mm XUSL4E14F061N XUSL4E30H061N XUSLBR5A0680 XUSL4E30H076N XUSLBR5A0760 760 760 mm XUSL4E14F076N XUSLBQ6A0760 810 - 3 mm beams 880 XUSLBQ6A0880 XUSLBR5A0880 910 920 mm XUSL4E14F091N XUSLBQ6A0920 XUSL4E30H091N XUSLBR5A0920 910 - 4 beams 1040 mm XUSLBQ6A1040 XUSLBR5A1040 1060 1200 mm XUSL4E14F106N XUSLBQ6A1200 XUSL4E30H106N XUSLBR5A1200 1210 1360 mm XUSL4E14F121N XUSLBQ6A1360 XUSL4E30H121N XUSLBR5A1360 1360 1520 mm XUSL4E14F136N XUSL4E30H136N XUSLBR5A1520 1510 1560 mm XUSL4E14F151N XUSL4E30H151N XUSLBR5A1560 1660 XUSL4E14F166N XUSL4E30H166N 1810 XUSL4E14F181N XUSL4E30H181N Detection capacity Hand and body detection Type 2 XUSL4E4BB091N Body protection Automatic or manual start/restart 400 mm External Device Monitoring (EDM) XUSLPZ3A0400M 160 500 mm XUSL2E30H016N XUSLPZ2A0500M XUSLPZ3A0500M 260 600 mm XUSL2E30H026N XUSLPZ2A0600M 310 XUSL2E30H031N 460 XUSL2E30H046N 6 Light beams XUSLPZ4A0300M XUSLPZ5A0300M XUSLPZ6A0300M XUSL2E2BB051N Hand protection XUSL2E30H061N (detection capacity 30 mm) 510 - 2 beams 610 XUSL2E30H076N Sensing distance 0.3 to 15 m 760 Height protected 810 - 3 beams XUSL2E3BB081N Automatic starting Manual starting XUSL2E30H091N XUSLNG5D0150 910 150 mm 910300 - 4 mm beams XUSLNG5C0150 XUSL2E4BB091N XUSLNG5C0300 XUSLNG5D0300 XUSL2E30H106N XUSLNG5D0450 XUSL2E30H121N XUSLNG5D0600 1060 450 mm 1210 600 mm XUSLNG5C0450 XUSLNG5C0600 XUSL2E30H136N XUSLNG5D0750 XUSL2E30H151N XUSLNG5D0900 XUSLNG5C0750 XUSLNG5C1050 1810 1200 mm XUSL2E30H166N XUSLNG5D1050 XUSL2E30H181N XUSLNG5D1200 1350 mm XUSLNG5D1350 XUSLNG5C1350 1500 mm XUSLNG5D1500 XUSLNG5C1500 1360 750 mm 1510 900 mm 1660 1050 mm XUSLNG5C0900 XUSLNG5C1200 Accessories for Safety light curtains Pre-wired connectors Pre-wired connectors M12 connector 5 pins XUSL4E3BB081N XUSLPZ1AM Sensing distance 0…4m or 0…12m selectable - Hand protections XUSL4E2BB051N Sensing distance 0.8 to 20 mBody and 0.8 to 70 m (depending on configuration) Hand detection detection 30 beams mm) (detection thru 2-34or 4 beams) 1(detection Light beamcapability 2 Light 3 Light beams Light beams 5 Light beams 300 mm Height protected (mm) XUSLN Hand detection Body detection (detection capability 30 mm) (detection thru 2-3 or 4 beams) Hand protection (detection capacity 30 mm) Sensing distance 0…4m or 0…12m selectable Sensing distance 0…4m or 0…12m selectable Accessories for Safety light curtains XZCP29P11Lpp Length 2m XZCP1164Lp 5m XZCP1264Lp 10 m 15 m 25 m XUSLB Female Lenght Transmitter - straight Transmitter Transmitter - 90° 5m XZCP1164L2 XSZBCT05 XZCP1264L2 10 m m XZCP1164L5 XZCP1164L10 15 XZCP1164L15 XSZBCT10XZCP1264L10XSZBCT15 XZCP1264L5 XZCP1264L15 30 m XZCP1164L25 XSZBCT30 XZCP1264L25 M12 connector 8 pins XUSLP Female Receiver Receiver - straight Transmitter Receiver - 90° XSZBCR05 XZCP29P11L2 XSZPCT05 XZCP53P11L2 XSZBCR10 XSZBCR15 XZCP29P11L5 XZCP29P11L10 XZCP29P11L15 XSZPCT10XZCP53P11L10 XSZPCT15 XZCP53P11L5 XZCP53P11L15 XSZBCR30 XZCP29P11L25 XSZPCT30 XZCP53P11L25 Receiver XSZPCR05 XSZPCR10 Lenght 3m 10 m XSZPCR15 XSZPCR30 30 m Emergency stop rope pull switches Choose : 1 > Body and cable length 2 Function > 3 Contact > 4 > Reference Connection Threaded cable entries anchoring point 109 XY2CJ Metal 41 40 NC+NO 2NC 2NC+NO 20 meters cable length Pg13.5 - straight XY2CJS15 (1) XY2CJS17 (1) XY2CJS19 (1) (2) 30 meters cable length Pg13.5 - right side XY2CJR15 (1) XY2CJR17 (1) XY2CJR19 (1) (2) 30 meters cable length Pg13.5 - left side XY2CJL15 (1) XY2CJL17 (1) XY2CJL19 (1) (2) (1) For ISO M20, just add "H29" to the part number (example: XY2CJS15 becomes XY2CJS15H29) (2) For 1/2" NPT, just add "H7" to the part number (example: XY2CJS19 becomes XY2CJS19H7) XY2CH 30 meters cable length 68 Metal 40 Tapped cable entries NC+NO 2NC 2NC+NO Pg13.5 XY2CH13250 XY2CH13270 XY2CH13290 Reset by booted pushbutton; ISO M20 XY2CH13250H29 XY2CH13270H29 XY2CH13290H29 1/2" NPT XY2CH13250H7 XY2CH13270H7 XY2CH13290H7 Plain hole cable entries NC+NO 2NC 2NC+2NO 201 XY2CE 70 meters cable length 142 Metal 52 229 Reset by booted pushbutton; Anchor point on right side. Pg13.5 XY2CE1A250 XY2CE1A270 XY2CE1A290 1/2" NPT XY2CE1A250H7 XY2CE1A270H7 XY2CE1A290H7 Reset by booted pushbutton; Anchor point on left side. Pg13.5 XY2CE2A250 XY2CE2A270 XY2CE2A290 1/2" NPT XY2CE2A250H7 XY2CE2A270H7 XY2CE2A290H7 Accessories XY2CJ XY2CH XY2CE Mounting kit XY2CZ9425 (3) XY2CZ9330 (4) XY2CZ9570 (5) (3) Kit contents: 1 galvanised cable L:30.5 (Ø 3.2 mm), 1 cable grip, 1 tensioner, 1 cable support, 1 cable end protector and 1 end spring. (4) Kit contents: 1 galvanised cable L: 30.5 m (Ø 3.2 mm), 1 cable grip and 1 end spring. (5) Kit contents: 1 galvanised cable L: 70.5 m (Ø 5 mm), 4 cable grips, 1 turnbuckle, 2 cable supports, 3 cable end protectors and 1 end spring. Safety modules for monitoring (Limit switches, coded magnetic switches, light curtains) Safety light curtains Choose : 1 > 2 > Safety type function Height XPS Standard and protected detection PLe Category 4 SILCL3 capacity 99 22.5 45 114 99 35 114 4 > Reference Function Safety interlocking switches Safety coded magnetic switches Emergency stop rope pull switches Safety light curtains Number of safety circuits 3 3 2 2 3 3 1 solid-state 4 solid-state 2 solid-state 2 solid-state – – XPSAF5130P XPSAFL5130P (8) Type 4 XUSLB 24 VDC Width of Finger and Height housing 24 VAC/DC XPSAC5121P protected 22.5 mm (6) Hand protections 230 VAC XPSAC3721P 280 mm 24 VDC Width of housing 35 mm (6) Finger protection Hand protection XPSDMB1132P (7) (detection capacity 14 mm) (detection capacity 30 mm) Sensing distance 0.5 to 7 m XUSLBQ6A0280 Sensing distance 0.5 to 8 m XPSDME1132P XUSLBR5A0320(9) 320 mm XUSLBQ6A0320 24 VAC/DC 360 mm XPSAK311144P XUSLBQ6A0360 XUSLBR5A0360 230 VAC 440 mm XPSAK371144P XUSLBQ6A0440 XUSLBR5A0440 520 mm XUSLBQ6A0520 XUSLBR5A0520 2 600 mm XUSLBQ6A0600 XUSLBR5A0600 XPSLCMUT1160 (10) Number of muting sensors 114 > Number of additional circuits Width of housing 45 mm (6) 99 3 Sensing range 24 VDC 680 mm XUSLBR5A0680 760 mm XUSLBQ6A0760 XUSLBR5A0760 880 mm XUSLBQ6A0880 XUSLBR5A0880 1200 mm XUSLBQ6A1200 XUSLBR5A1200 1360 mm XUSLBQ6A1360 XUSLBR5A1360 (6) For version with non removable terminal block, delete the letter P from the end of the reference (example: XPSAK311144P becomes XPSAK311144). 920magnetic mm XUSLBR5A0920 (7) Safety module for monitoring 2 coded switches.XUSLBQ6A0920 (8) Use for XPSAK Automatic start / restart. (9) Safety module for monitoring 6 coded magnetic switches.XUSLBQ6A1040 (10) Safety module for muting function. 1040 mm XUSLBR5A1040 1520 mm The information provided in this documentationXUSLBR5A1520 contains general descriptions and/or technical characteristics Sensors Telemecanique Sensors USA, Inc. 1875 Founders Drive Dayton, Ohio 45420 (800) 435-2121 Telemecanique 1560 mm Canada, Inc. 5985 McLaughlin Road Mississauga, Ontario L5R 1B8 (800) 435-2121 Type 4 XUSLP www.tesensors.us Body protections www.tesensors.ca Detection capacity of the performance of the products contained herein. This documentation is not intended as a substitute for and XUSLBR5A1560 is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Body protection Sensing distance 0.8 to 20 m and 0.8 to 70 m (depending on configuration) 9006BR1402 R03/15 © 2015 Schneider Electric Industries SAS. All rights reserved. 1 Light beam - XUSLPZ1AM 2 Light beams 3 Light beams 4 Light beams 5 Light beams 6 Light beams