conti® SYncHRoFLEx Polyurethane timing Belts overall catalog

Transcription

® Registered trademark of ContiTech AG
conti® SYncHRoFLEx Polyurethane timing Belts
overall catalog
Polyurethane Timing Belts
2
CONTI® SYNCHROFLEX
CONTI® SYNCHROFLEX Timing Belts
Advanced manufacture
and high-performance
materials combine for
product excellence
CONTI® SYNCHROFLEX Polyurethane Timing Belts deliver best-in-class power transmission performance
thanks to the uncompromising selection of high-grade
components and the superior bonding strength between
the hard-wearing polyurethane shell and the constantlength galvanised steel tension members.
The highly flexible production process is particularly suitable for manufacturing double-sided belts and high
accuracy profiles on the belt back. A range of specialist
compounds and materials are available to enable operation at low temperatures, in clean rooms and in the food
industry.
Content:
Page
General Information
4 Manufacturing process
5 Construction
6
Timing Belt Types
8 Antistatic CONTI® Synchroflex Timing Belts
9 “E” tension member
10 High-power version GEN III
12
Belt performance table
14 Tolerances
15
Mulco belt-pilot
16 Belt tension gauges
17
Angular drives
18
Guiding belts with flanges
19 Tooth gap shapes
20
Safety factors
21
Pre-tension force
23
Basis of calculation
AT high performance Timing Belts
28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 AT 3 GEN III
AT 3
AT 5 GEN III
AT 5
AT 10 GEN III
AT 10
ATP 10 GEN III
ATP 10
ATP 15 GEN III
ATP 15
AT 20 GEN III
AT 20
62 M (MXL)
64 K 1 / K 1,5
T
T
T
T
T
T
standard Timing Belts
2
2,5 / T 2,5-DL
5 / T 5-DL
10 / T 10-DL
20 / T 20-DL
Imperial Timing Belts
Serrated Profile Timing Belts
F Flat Belts
66 F/AF/BF/CF/DF
Timing Belts with special tooth profiles
67 V (excerpts of XL, L, H)
Special Timing Belt Versions
68
Coated timing belts
76
Integrated flights
78
Brush timing belts
80
Mechanical rework
81 List of Catalogues
83Addresses
3
Manufacturing process
CONTI ® SYNCHROFLEX Polyurethane Timing Belts
consist of two components – a cast Polyurethane shell
and a high grade steel cord tension member. The excellent bond between the two materials results in a very
high power transmission capacity.
The manufacturing process – cast moulded polyurethane – combines the following advantages:
•
The cast polyurethane timing belt is an exact image
of the precision engineered mould. High pitch accuracy is achieved over the entire belt. The technology
is particularly suitable for applications requiring high
levels of angular accuracy, smooth running characteristics, high rotational speeds and long life.
• Excellent linearity with high pitch accuracy and re peatability allows the length to be optimised by
adjusting the cord tension.
• The casting method combines with the capillary
effect, producing an exceptionally high strength bond
with the steel tension members.
•
The high reproduction quality of the cast polyurethane
process enables fine contoured features and smaller
belt pitches to be moulded. Double-sided belts and
profiled flights on the back of the belt can be moulded simultaneously.
• The process produces an effective belt width of up to
300 mm.
• Belt lengths from 55 mm to 6000 mm endless length.
CONTI® SYNCHROFLEX Polyurethane Timing Belts are
used across a very wide range of applications for the
transmission of synchronous rotary motion in power
transmission systems, servo and motion controls, conveyors and transfer lines. They operate in a rotational
speed range of up to 20,000 rpm.
Casting mould, illustrated with a spirally wound tension
member on the mould core.
Applications include:
• office machinery
• electronic data processing equipment (EDP)
• textile machinery
• wood processing machinery
• machine tools
• printing machinery
• pumps
• compressors
• building machinery
Ready de-moulded timing belt sleeve, partly separated into
individual belts.
4
CONTI® SYNCHROFLEX
Construction
manufactured from wear resistant Polyurethane and
high tensile steel cord tension members. Both high
quality materials combine to form the basis for dimensionally stable and highly durable polyurethane timing
belts. Polyurethane timing belts have very high longitudinal stiffness and no post-elongation of the tension
members is to be expected in continuous operation.
Only under extreme loading conditions and as a precaution after a brief run-in, a small loss of tension may
necessitate a once-only retensioning.
manufactured using production methods that maintain
very high tolerances to ensure a uniform load distribution during power transmission. They are equally suited
for high torque transmission and precise positioning
applications or the combination of both.
The timing belts are temperature resistant with ambient
temperatures from -30°C to +80°C. However, applications close to these temperature limits (< -10°C and
> +50°C), may require adapted dimensioning. For
specific temperature ranges, optional belt materials
are available; e.g. the CONTI® SYNCHROFLEX GEN III
Polyurethane Timing Belt range is temperature resistant
up to +100°C. Please contact our technical specialists
for this type of application.
• positive fit, synchronous running
• constant length, no post-elongation
• low noise
• wear resistant
• low-maintenance
• highly flexible
• positional and angular accuracy
• fatigue resistant, low extension steel cord tension
members
• belt speeds up to 80 ms-1
• small production quantities available
• excellent power-to-weight ratio
• low pre-tension
• low bearing loads
• permits large centre distances
• permits large transmission ratios
• high degree of efficiency, max. 98%
Properties:
mechanical
chemical
• hydrolysis stabilized
• resistant to aging
• temperature resistant from -30°C to 80°C, note:
CONTI® SYNCHROFLEX Polyurethane Timing Belt
GEN III up to 100°C (see information in the text
”Construction”)
• tropical climate resistant
• resistant against simple oils, fats and petrol
• resistant to some acids and alkalines
For further information about the environmental
resistance characteristics of CONTI® SYNCHROFLEX
Polyurethane Timing Belts please contact your Mulco
sales partner.
5
Timing Belt Types
AT
High capacity profile
further development of the T profile resulted in the AT
profile. This type of belt is characterised by the larger
tooth shear strength resulting from the larger tooth
volume and the stronger tension members.
Further advantages:
• favourable tooth mesh
• strengthened tension members for constant pitch
• Improved performance up to 50 % as compared to
the T profile
• precise transmission of movement in conjunction
with synchronous pulleys with reduced or zero backlash
• reduction of meshing impacts or shocks
• compact drive dimensions
(also available in the GeN III version)
ATP High capacity profile
further increased performance, noise reduction and
extension of the belts useful life led to the development of the ATP timing belt in 1993. At the time, the
main interest was focussed on the optimum tooth
form. The basic concept of the new ATP profile provides the division of the trapezoidal tooth into two individual and load bearing teeth.
Performance increase up to 60 %, running noise
reduced by up to 10 db(A) and an increased
longevity by:
• tooth surface area increased by 70 %
• uniform load/tension distribution
• improved power dispersion
• reduced polygon effect
• small construction width
• optimised tooth mesh
(also available in the GeN III version)
T
Standard profile
The timing belt with a trapezoidal profile according to
DIN 7721 is regarded as the classical standard timing
belt.
Preferred use:
• for standard drive tasks
• transmission tasks with double-sided belts
• for high bending stress
• for drives with contraflexure
6
CONTI® SYNCHROFLEX
T
in DL version
The Dl timing belt (the belt is double-sided) is used
in the power transmission and transport technology.
Multiple-shaft drives with different rotational directions
can be realised with this timing belt. full load ability on
both tooth sides.
Imperial profile
Imperial pitches according to DIN/ISO 5296 are
available in the following sizes:
M (Mxl) = 2.032 mm
xl
= 5.080 mm
l = 9.525 mm
h
= 12.700 mm
xh = 22.225 mm
Preferred use:
• Applications in imperial units
F
F Flat belts
Preferred use:
• Friction drives (open length and endless)
• high-speed drives (CONTI® SyNChrOflex Belt)
• drives without synchronous transmission
K
Serrated metric pitch profile.
Preferred use:
• Fine mechanical technology requiring
small dimensions
V
The development of the PU timing belt started in 1954
with pitches other than standard.
Preferred use:
• tasks requiring special pitches
• spares
Please contact your nearest Mulco distributor to know
more about our entire range of V-type belts.
7
Antistatic CONTI® SYNCHROFLEX Timing Belts
Characteristics of CONTI® SYNCHROFLEX
Antistatic Timing Belts
The antistatic properties of CONTI® SYNCHROFLEX
Polyurethane Timing Belts are achieved by:
1.
antistatic coating
A post-process application of an electrically conductive coating on all sides of the belts with or without textile facing
2. antistatic polyurethane mixture
A special conductive polyurethane mixture (max. belt
length to 700 mm)
Other lengths on request.
Colour of antistatic timing belts: black.
Application / Use
Antistatic CONTI® SYNCHROFLEX Polyurethane Timing
Belts are used where electrostatic discharge (ESD) is not
desired or is prohibited, e.g. for the transport of electronic
components, for drives and/or conveying equipment in
an inflammable or explosive environment.
Electrostatic charges
The build up of static electricity, due to the continual
separation of two contact surfaces, can be expected
where timing belts are involved, e.g. between pulley and
timing belt. This static electric charge can be considerable and may increase the danger of ignition at the moment
of discharge. The value of the static electric charge is
dependent on the materials used for the timing belt, synchronous pulleys, tension rollers and/or support rollers.
The risk of ESD rises as the belt speed, belt tension and
the contact surface width increase.
Antistatic properties
Antistatic CONTI® SYNCHROFLEX Polyurethane Timing
Belts consistently avoid the formation of static electric
charges.
Quality assurance
Conductivity is measured using test equipment meeting
ISO 9563 requirements. Upon request, the wear resistance of the antistatic layer can be checked on test
timing belts with an antistatic facing. Due to the fact
that extended operation will result in probable surface
wear, the conductivity of the antistatic timing belts may
deteriorate and regular checks of the resistance values
are essential. When belts are to be used in environments
with a high likelihood of explosion, please contact our
technical specialists for advice.
Order example
CONTI® SYNCHROFLEX Timing Belt 25 T 5 / 630 EL-PU
antistatic coated
For available lengths, please contact your Mulco sales
partner.
8
CONTI® SYNCHROFLEX
“E” Tension Member
Highly flexible tension members – the “E” steel cord
tension member
The smaller the diameter of each single wire, the more
flexible the overall tension member is! This relationship
led us to develop CONTI® SYNCHROFLEX Polyurethane
Timing Belts with “E” tension members.
The cross sectional area of the “E” tension member comprises several strands of smaller diameter
wires, each with excellent bending fatigue characteristics. With much improved overall flexibility CONTI®
SYNCHROFLEX Polyurethane Timing Belts are particularly suited to smaller diameter pulleys and tension
rollers; the minimum number of teeth and/or minimum
diameter of the pulleys can be reduced by up to 30%
compared with standard tension members. Timing belts
with “E” tension members are recommended for multishaft drive applications with frequent reverse bending.
Application information:
Steel cord tension members encapsulated
in polyurethane:
The smaller the diameter of the individual wire, the more
flexible the whole timing belt.
Available versions:
• for the pitches AT 3 (standard),
AT 5 (Gen III standard), AT 10, ATP10, T 5,
T 10, T 20
• all standard belt lengths for the chosen pitch
Summary:
• all standard pulley sizes for the chosen pitch
• smaller diameter individual wires in the steel cord
• all calculations as per the standard belt chosen
• higher dynamic capabilities
• extremely high bonding and bending fatigue strength
• smaller pulley and tension roller diameters
• runs on standard diameter timing pulleys.
For applications under extreme conditions, please contact your Mulco sales partner.
Timing belts with “E” tension members, minimum numbers of teeth:
Drive Type
AT 3
AT 5
AT 10 T 5
(Standard) (GEN III, ATP 10
Standard)
T 10
T 20
without contraflexure
Timing pulley
zmin
z
Tension roller
(smooth),
running on teeth
with contraflexure
Timing pulley Tension roller (smooth),
running on the back
of the belt
dmin [mm] 20
z
min
min
d
d
min
min
12
12
1010 12
dmin [mm] 20
18
50
18
zmin
20
20
1215 20
50
80
18
15
20
50
50
80
120
9
High-power version GEN III
CONTI® SYNCHROFLEX Timing Belt (SFX)
AT GEN III / ATP GEN III
A powerful basis
The combination of high tensile steel cord tension members and wear resistant polyurethane forms the basis
for dimensionally stable and extremely durable highperformance timing belts. A convincing technology with
excellent product features that include:
•
•
•
•
•
•
•
constant length, no post-elongation
high dimensional stability
high-torque transmission
quiet running
maintenance-free
lubrication-free
highly chemical resistant and mechanically durable
Each generation is different.
GEN III is better!
It was worth its while to focus on further developing the power
drives of the AT and ATP range CONTI® SYNCHROFLEX
polyurethane timing belts because the new GEN III generation excels in a 25% increase in power transmission
compared with the AT/ ATP standard. Another economic
bonus: all CONTI® SYNCHROFLEX GEN III polyurethane
timing belts support the use of standard AT/ATP pulleys.
Mulco partners everywhere agree that advancement is
synonymous to providing solutions for every product at a
level of sophistication down to the smallest detail. A bifilar
tension member arrangement and a higher packing density translates this into the CONTI® SYNCHROFLEX GEN III
polyurethane timing belt for the AT and ATP ranges.
The high-performance polyurethane designed for dedicated use with the CONTI® SYNCHROFLEX GEN III polyurethane timing belts yields greatly improved benchmark
results compared with the standard. One of the benefits is
that its increased hardness allows line engineers to count
on a larger number of load-carrying teeth.
10
CONTI® SYNCHROFLEX
CONTI® SYNCHROFLEX GEN III – with up to
25% greater power transmission compared with
the AT / ATP standard:
Two-filament
tension member
arrangement
New high
performance
polyurethane
• increased tensile force Fzul to max. +45%
due to closer wound cords
• Increased power transmission Fspec +25%
• redesigned bifilar steel (S and Z) cord balance
for better tracking
• reduced flange friction
• lower running noise with narrower belt width
for equal performance
• longer life
• load bearing teeth force distribution – increased
by up to 30%
• temperature range up to +100° C
(for performance values close to the range limit,
please contact your Mulco sales partner.)
125 %
100 %
CONTI® SYNCHROFLEX
Standard
CONTI® SYNCHROFLEX
GEN III
11
AT 3 GEN III
AT 3
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 6 kW
approx. 20.000 min-1
approx. 80 ms-1
from z=15
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 5 kW
approx. 80 ms-1
from z=15
Applications (Example):
small power drives,
handling technology
small power drives,
handling technology
AT 5 GEN III
AT 5
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 18 kW
approx. 80 ms-1
from z=15
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 15 kW
approx. 80 ms-1
from z=15
Machine tools, Pumps,
Textile machinery
Machine tools, Pumps,
Textile machinery
AT 10 GEN III
AT 10
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 87 kW
approx. 60 ms-1
from z=15
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 70 kW
approx. 60 ms-1
from z=15
Construction machines,
Pumps, Paper-making
machines, Compressors
compactors, Textile machinery, roller-table drives
Construction machines,
Pumps, Paper-making
machines, Compressors
compactors, Textile machinery, roller-table drives
ATP 10 GEN III
12
ATP 10
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 150 kW
approx. 60 ms-1
from z=15
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 100 kW
approx. 60 ms-1
from z=15
Machine tools, Textile
machinery, Power drives
Sanding machinery,
Power drives,
Machine tools
CONTI® SYNCHROFLEX
ATP 15 GEN III
ATP 15
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
possible beyond 220 kW
approx. 50 ms-1
from z=20
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
approx. 50 ms-1
from z=20
Textile machinery,
Machine tools,
high power drives
Power drives,
Machine tools
AT 20 GEN III
AT 20
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
approx. 6.500 min-1
approx. 40 ms-1
from z=18
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
approx. 6.500 min-1
approx. 40 ms-1
from z=18
Heavy-duty drives, Textile
machinery, Printing machine,
Machine tools
Heavy-duty drives,
Textile machinery,
Printing Machine,
Machine tools
K 1,5; T 2; M; T 2,5
T5
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 0,5 kW
approx. 80 ms-1
from z=10
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 5 kW
approx. 80 ms-1
from z=10
Precision machine drives,
film camera drives,
Positioning drives
Office machinery,
home appliances,
Positioning and
regulating drives
T 10
T 20
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
≤ 30 kW
approx. 60 ms-1
from z=12
Power transmission:
Rotational speed:
Peripheral speed:
Timing pulleys:
up to approx. 100 kW
approx. 6.500 min-1
approx. 40 ms-1
from z=15
Machine tools,
Main and subsidiary drives,
Textile machinery,
Printing machinery
Heavy Construction machines,
Paper-making machines,
Pumps, Compressors
compactors, Textile machinery
Remark:
Special timing belt designs allow the rpm and peripheral speed parameters to be increased.
13
Tolerances
CONTI® SyNChrOflex Timing Belts Tolerances
Length tolerances for standard
CONTI® SYNCHROFLEX Polyurethane
Timing Belts
Length tolerance
in relation to
centre distance
Belt length
Belt length measurement is carried out to
DIN 7721, in relation to the centre distance.
up to
320 –
630 –
1000 –
1960 –
3500 –
320
630
1000
1960
3500
4500
mm
mm
mm
mm
mm
mm
4500 – 6000 mm
Width tolerances for standard
CONTI® SYNCHROFLEX Polyurethane
Timing Belts
Type / group
up to 50 mm 50 – 100 mm over 100 mm in % der Belt width
K1
K 1,5
± 0,3 mm
± 0,3 mm
± 0,5 mm
± 0,5 mm
± 0,5 %
± 0,5 %
T2
M (Mxl)
T 2,5
T5
T 5-Dl
T 10
T 10-Dl
T 20
T 20-Dl
± 0,3
± 0,3
± 0,3
± 0,3
± 0,3
± 0,5
± 0,5
± 1,0
± 1,0
mm
mm
mm
mm
mm
mm
mm
mm
mm
± 0,5
± 0,5
± 0,5
± 0,5
± 0,5
± 0,5
± 0,5
± 1,0
± 1,0
mm
mm
mm
mm
mm
mm
mm
mm
mm
± 0,5
± 0,5
± 0,5
± 0,5
± 0,5
± 0,5
± 0,5
± 1,0
± 1,0
%
%
%
%
%
%
%
%
%
AT 3
AT 5
AT 10
ATP 10 / ATP 15
ATP 20
± 0,3
± 0,5
± 1,0
± 1,0
± 1,0
mm
mm
mm
mm
mm
± 0,5
± 0,5
± 1,0
± 1,0
± 1,0
mm
mm
mm
mm
mm
± 0,5
± 0,5
± 1,0
± 1,0
± 1,0
%
%
%
%
%
Please note:
Tolerance for special tension members
upon request.
14
± 0,15
± 0,18
± 0,25
± 0,40
± 0,50
± 0,80
mm
mm
mm
mm
mm
mm
± 1,20 mm
Online calculation utility
Mulco
your direct road to perfect design solutions
Mulco belt-pilot – online support at www.mulco.net
let others talk about being close to the customer, we as the market leading provider of polyurethane timing belts
actually live by the idea. Mulco-europe eWIV‘s secret of success has always been largely due to advising our
customers before they enter the design stage. Mulco belt-pilot is taking our customer dedication a critical step
further ahead. Our interactive Internet service offering enables you to calculate your personal design solutions online.
Whatever field of technology you are interested in - power transmission, linear, transport or components - start Mulco
belt-pilot at www.mulco.net for 24/7 access to the actual product information, CAD downloads and calculations you
need.
Mulco
Many benefits.
q Interactive service offering with
video-based e-learning option
q extensive product databases
q free use of CAD downloads
q Import the CAD drawings into your CAD system
q Calculate timing belts, pulleys and components
q email inquiries supported
15
Belt tension gauges
Setting the correct pre-tension force
Clavis and SM4 belt tension gauges – simple, practical and efficient
Clavis and SM4 belt tension gauges allow you to measure the resonant frequency of a vibrating belt span. This resonant
frequency directly depends on the belt tension. When starting to use or servicing a drive, these gauges are indispensable
when it comes to properly adjusting the pre-tension force. A correct pre-tension force minimizes the load on the bearings,
optimizes the running of the belt and, thus, extends the life of the drive. Moreover, it reduces the noise level and balances
non-parallelism of wide polyurethane timing belts.
Clavis uses microphones to acoustically measure the
frequency of the vibrating belt.
q Measuring ranges: 30 Hz … 600 Hz (standard)
and 10 Hz … 300 Hz
q Precision: +/- 1 %
q for all polyurethane drive belt models with different tension
members (e. g. steel, aramid, glass-fibre)
q Broad portfolio of replaceable sensor heads
q Integrated calibration equipment
q Battery-powered
q Steel tuning fork for fast frequency sampling included
q Ships with a calibration certificate and a case
Span tension gauge SM4 uses a sensor to measure the
frequency of the vibrating belt.
q Measuring range: 7 Hz … 350 Hz
q Precision: +/- 5 %
q for all polyurethane drive belt models with different tension
members (e. g. steel, aramid, glass-fibre)
q large display
q Weighs just 110 g
q Belt clip
q Battery-powered
q Ships with a transport case and protective sleeve
16
CONTI® SYNCHROFLEX
Angular drives
CONTI® SyNChrOflex Timing Belts can be applied as
angular drives. Take into consideration that the timing belt
can only be crossed (twisted). eliminates the run-off effect.
IT /b ≥
b
=
=
IT
Angular drive with 2 axes
20
Belt width
Span length
Angular drive with 3 axes
With crossed timing belt applications the outer tension
members suffer a higher elongation than the inner ones.
Due to the larger elongation in the edge zone the permitted proportional circumferencial force for the belt in
the tension members is reduced.
No power reductions or special measures are necessary
at a ratio of IT / b ≥ 20.
At a required ratio of IT / b < 20 please contact our
technical department for advice.
fzul
admissible tensile force
fU
The remaining peripheral force
fS
Tensile force due to crossing
17
Guiding belts with flanges
Timing belts must be guided to eliminate the lateral
run-off effect. This is normally done by flanges.Minimum
lateral forces and low frictional losses can be resulted by
the optimum arrangement of the belt guidance.
For this purpose, the following possibilities
are available:
• Timing belt guidance downstream of a large free span
length (infeed length (a) should not be less than 5
times belt width)
• Guidance at the drive pulley (preferable for two shaft
drives with short centre distance)
• Guide for low-transmission pulleys (preferably for
multiple-shaft drives)
• Guidance on the tension rollers
- Tension roller arrangement in the slack span side
- With arrangement on the belt back side:
consider minimum diameter with contraflexure
- With arrangement on the belt toothed side: Length
of arc of contact, min. 3 teeth
- with changing rotational directions preferable
in the span length centre
- Condition: Minimum span length (a) between tension roller and pulley should not be less than 5 times
belt width
• Ensure high axis parallelity and flush alignment of all
pulleys to achieve optimum guiding features.
• For cost reasons it is possible to fit flanges also to
the smaller pulley after taking the functional reliability
into consideration.
18
<
a
>
The application of CONTI® SYNCHROFLEX polyurethane timing
belts in two-filament arrangement is the ideal prerequisition for
an optimum belt guidance.
CONTI® SYNCHROFLEX
Tooth gap shapes
Timing belts are positive fitted drive elements. They
work slippage-free with the respective synchronising
pulleys. CONTI® SyNChrOflex timing belt drives can
be optimised additionally for a movement transmission
with a low flank backlash.
For some profiles and pitches, the SE or zero gap can
be used for especially high accuracy drives. Please contact us for technical advice.
• Prerequisites for the application:
Pitch matching between timing belts and pulley.
Tooth gap shapes
• Influencing factors of the pitch matching:
– Pre-tension force
– No. of teeth in mesh (ze)
– load rate (rotational speed, dynamic behaviour...)
– Manufacturing tolerances
Tension Member
T
Timing Belt
Tooth Gap
Pulley
Normal Backlash
Tooth Gap
T
reduced Backlash
“Se” Tooth Gap
T
Zero Backlash
“0” Tooth Gap
19
Safety factors
The width of a timing belt is correct when the permissible values for tooth shear strength, tension cord strength
and flexibility are not exceeded under unfavourable
operating conditions. In our catalogue, load limits are
stated which have been reliably proven and confirmed
by bench tests and results obtained in practice. A safety
factor is only required for drives with transmission into
higher speed.
It is important, that the unfavourable load types occuring
in the drive are known resp. correctly estimated by the
engineer. With a positive fit transmission, even shortperiod overloads act via the timing belt being the drive
member. Some instructions to this issue:
Rated operation
Design timing belts for the operating condition of the
rated load. The rated load is the operating condition at
which the drive should transmit the torque or the power
at rated speeds under normal conditions.
Moments of inertia
Moments of inertia and/or centrifugal masses in the
drives generally create a uniform running behaviour.
Depending on the acceleration and deceleration characteristic it has to be differentiated and checked whether
the moments of inertia create an additional load on the
timing belt.
Start-up characteristics
a) Drive side: The max. torque of the drive machine
under start-up conditions is to be taken into consideration. The start-up torque, e.g. for three-phase
squirrel cage motors amounts to 2 to 2.5 times the
rated value.
b) On the drive side: If necessary, „initial torques“ affective to the drive part timing belt are to be taken into
consideration under start-up characteristics.
Step-up transmission
The following safety factors are to be applied for step-up
transmissions:
i = 0,66 up to 1,00
S = 1,1
i = 0,40 up to 0,66
S = 1,2
i < 0,40
S = 1,3
Check load case a) or b) with rotational speed n=0.
Braking
It might have to be defined whether braking leads to
loads which fully act via the timing belt and possibly
exceed the type of load produced by the rated operation
or the start-up characteristics. During braking a possible
torque reversal should be taken into consideration.
Unevennesses (load variations, shock loads)
In addition to the rated load, superimposed vibration
and shock loads could act on the timing belt as the
transmission member. for the illustrated example,
increase the calculated belt width by the factor of 1.3.
effective capacity
Time
20
During braking a torque reversal may occur which
would change a reduction ration into a step-up drive.
CONTI® SYNCHROFLEX
Pre-tension force
Pre-tension force
Influencing factors
Pre-tension is intended to guarantee a minimum tensioning force at the slack span side to ensure smooth tooth
meshing into the driven pulley.
Belt stiffness
friction forces created by the interaction of the tooth
mesh (especially at the slack span) intensify the span
forces, which in turn increase the degree of elongation.
This influence may lead to the slack span tooth mesh
butting against the driven pulley, thereby causing the
belt to jump.
elongation being directly depending on the belt stiffness, the high stiffness of the steel cord tension members permits a comparably low pre-tension.
Generally, the pre-tension should only be set as high
as necessary. The necessary pre-tension force of the
spans fV depends on the max. peripheral force fU, the
belt length lB (number of teeth ZB) and the drive configuration.
Peripheral force
The peripheral force acts in proportion to the elongation
of the load span, i.e. excessive slackening of the slack
span can be counter-acted by a pre-tension matched to
the peripheral force.
The recommendations shown in the table refer to the
pre-tension force setting per span.
Drive configuration
Pre-tension force
of each individual
span
Two-shaft drive
ZB <
60
fV = 1/3 fU
60 ≤ ZB < 150
fV = 1/2 fU
ZB > 150
fV = 2/3 fU
Multiple-shaft drive
lload span ≤ lSlack span
lload span > lSlack span
linear drive
fV = fU
fV > fU
fV ≥ fU
In every case, the tension cord strength is the top limit
of the span load. Take into consideration that especially
with multiple-shaft and linear drives, an addition of the
pre-tension force and the peripheral force in relation to
the load span force is to be expected.
Belt length
Belt elongation resulting from the effect of the peripheral force and the friction forces is also approximately in
proportion to the belt length. Therefore, the tendency
of running up or jumping is considerably influenced by
the belt length. even under high peripheral forces with
the resulting friction forces, a very short timing belt will
elongate to only a small degree, so that even when
subject to low pre-tension forces there will be no danger
of running up or jumping of teeth. On the contrary, with
short timing belts peripheral deviations of the pulleys
could cause heavy pre-tension fluctuations and, as a
result, extreme peak values.
Proportion of the span lengths
especially with multiple-shaft drives the load span is
often markedly longer than the slack span side. for this
reason, a slight elongation of the load span results in
a very unfavourable slack on the span side. Therefore,
the pre-tension force of spans of such ratios should be
higher than the peripheral force.
Precise transmission of movement
There is a high transmission accuracy possible in the
reverse operation with CONTI® SyNChrOflex Timing
Belts, when the span pre-tension forces are selected in
the same size of the peripheral force.
21
Pre-tension force
Consequences of faulty
pre-tension setting:
Measuring with frequency
measuring meter
too low pre-tension
• the teeth of the slack span side run up on or
override the teeth of the driven pulley
• Wear on the faces caused by the friction force
during meshing
• Forced breakage by excessive elongation
due to full overriding
The intrinsic frequency of a vibrating belt span can be
measured by means of various Mulco belt tension measuring meters. The pre-tension force of the span can be
calculated from the measured intrinsic frequency:
excessive pre-tension
• high bearing load of the shafts
• Reduction of the transmittable power
• Wear and tear at the belt tooth
fV = 4 · m · l T 2 · f 2
The corresponding intrinsic frequency can be calculated, if the pre-tension is preset:
f =
f:
m:
lT :
fV :
fV
4 · m · l T2
Frequency of the variations in Hz
Mass of the belt per meter length in kg/m
drum span length subject to vibration in m
Span force in N
Please contact your Mulco partner for the
various measuring meters (see page 16).
General informations
Design
• In the transmission configuration, design at least
one adjustable axis, plan one adjustable tension
roller (not spring-loaded) for fix centre distances
• the bearing has to be absolutely rigid
• Note the importance of a parallel run and flush
alignment of the timing pulleys
Transport/storing
• Upon receipt, unpack the timing belt immediately
and store in circular position (CONTI® SyNChrOflex
Timing Belts) in a dry place at room temperature
• Do not bend
22
Mounting
• Fit timing belts on the pulleys when slack without
exerting any force
• Exert no force when fitting with fixed centre distances
(CONTI® SyNChrOflex Timing Belts) if necessary,
fit together with timing pulleys
• Apply pre-tensioning force according to the
chapter „Pre-tension“
• secure adjustable axis against slippage
• Do not clamp the timing belt between the flanges
Operation
• Protect the drives against dust, dirt, hot
surrounding media as well as acids and alkalis
• Take into consideration the ambient temperatures
(see Characteristics of polyurethane timing belts)
CONTI® SYNCHROFLEX
Basis of calculation
Providing the following conditions of tooth strength (1st),
tension member tensile strength (2nd) and flexibility (3rd)
are met, then a maintenance-free timing belt operation
can be expected.
1. Tooth shear strength
The specific tooth shear strength depends on the
rotational speed. The maximum specific tooth shear
strength is the limit load the belt tooth can bear in continuous operation. The values are stated in tables for
each timing belt type. The timing belt drive is correctly
designed, when not exceeding the admissible tooth
shear strength. Generally, a special safety factor is not
necessary, see chapter „Safety factors“.
specific tooth shear strength
force distribution
load distribution
The high specific tooth shear strength of the ATP
profile, for example, is achieved by the optimised force
and load distribution. The effective force is distributed
to two tooth faces.
The working loads can be distributed more effectively
with more belt teeth meshing in the pulley.
Due to the high pitch accuracy of CONTI® SyNChrOflex Timing Belts, generally, it can be calculated with
12 belt teeth in mesh, unless there are less than that
number actually in mesh.
2. Tension member strength
Admissible tensile stress on the belt‘s cross-section
Fzul
The timing belt is designed correctly, when the maximum admissible tensile force in the steel cord tension
members is not exceeded under operation conditions.
The table values for fzul refer to the constant loading.
3. Flexibility
Minimum number of teeth, minimum diameter
The recommended minimum number of teeth and/or
the minimum diameter for a malfunction-free operation
depends on the selected belt type. Take especially into
consideration that the minimum number of teeth and/
or the minimum diameter is higher when using a belt
arrangement „with contraflexure“ (e. g. due to a tension
roller).
Drive layout without
contraflexure
Drive layout with
contraflexure
23
Calculation example
Calculation example
Terms, definitions
Peripheral force
specific tooth force
admissible tensile force
Pre-tension force
Shaft force
Torque
Acceleration torque
specific torque
Power
specific power
load bearing torque
load
Density
Speed
rotational speed
Angular speed
frequency
Peripheral force
fU =
=
=
2 · 103 · M
M =
d0
19,1 · 10 · P
6
n · d0
103 · P
=
=
v
π·n
ω =
[N]
[N/cm]
[N]
[N]
[N]
[Nm]
[Nm]
[Ncm/cm]
[kW]
[W/cm]
[kgm2]
[kg]
[kg/dm3]
[m/s]
[min-1]
[s-1]
[s-1]
30
Acceleration torque
J · Δn
MB =
9,55 · tB
Centre distance
Belt length
Belt width
Pulley width
Bore, pulley
Pitch circle diameter
Outside diameter
Span length
Pitch
Number of belt teeth
Number of teeth with i = 1
Number of teeth in mesh
No. of teeth, small pulley
No. of teeth, large pulley
ratio
Acceleration time
Power
Torque
Angular speed
24
fU
fUspec
fzul
fV
fW
M
MB
Mspec
P
Pspec
J
m
p
v
n
w
fe
d0 · fU
2 · 10
P =
3
9,55 · 103 · P
=
n
d0 · P
2·v
=
a
lB
b
B
d
do
dK
lT
t
zB
z
ze
z1
z2
i
tB
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[s]
Belt Length for i =1
M·n
9,55 · 103
lB = 2a + π · d0
= 2a + z · t
fU ·d0· n
19,1 · 106
fU · v
103
Rotational speed
19,1 · 103 · v
n =
d0
Speed
Load bearing torque
Apply all equations with the dimensions mentioned here.
J = 98,2 · 10-15 · B · ρ · (dk4 - d4)
v =
d 0· n
19,1 · 103
Pitch circle diameter
z·t
d0 =
π
CONTI® SYNCHROFLEX
Calculation
example
Task
A roll table drive must be designed for heavy conveying
duties. Under start-up conditions approx. 2.5 times the
running torque is exerted on the timing belt.
The application conditions are:
Given:
Power
Nominal speed
Start-up torque
ratio
Number of teeth
Centre distance
P
n
M
i
z
a
= 10
= 800
= 300
=
1
= 25
= 625
kW
min-1
Nm
mm
Required:
The timing belt pitch is to be determined and the belt
width is to be calculated.
Formulea:
b =
100 · M
z1 · ze · Mspec
b =
1000 · P
z1 · ze · Pspec
fU =
2 · 103 · M
d0
fU [N]
L =
2·a+z·t
[mm]
d0 =
z·t
π
[mm]
M[Nm]
P[kW]
25
Calculation example
How to proceed
Belt length:
Calculation of the
belt width:
Profile
L =
=
=
preselection: AT10. Calculation of the belt length with formula:
2·a+z·t
2 · 625 + 25 · 10
1500 mm
1. Tooth shear strength
In the calculation ze = 12 will be used (see basis of calculation).
Calculation of the belt width with the nominal speed from the power equations.
b
=
1000 · P
z1 · ze · Pspec
=
1000 · 10
25 · 12 · 6,96
=
4,79 cm = 47,9 mm
Calculation of the belt width under start-up torque when rotational speed n = 0.
b
=
100 · M
z1 · ze · Mspec
=
100 · 300
25 · 12 · 11,70
=
8,54 cm = 85,4 mm
The belt width is to be determined from the least favourable load conditions.
Selected: the next larger standard belt width b = 100 mm.
2. Tension member strength
The corresponding peripheral force can be calculated from the general data
supplied:
fU =
=
2 · 103 · M
d0
2 · 103 · M
= 7539 N < 16000 N
79,58
The tabular value fzul for AT 10 with 100 mm belt width is 16000 N. Thus, there is a sufficient tension member safety factor.
3. Flexibility
The design is a drive „without contraflexure“. The minimum number of teeth according to
the table is adhered to.
Result:
26
The drive is correctly designed with a belt width of 100 mm. A maintenance-free operation
can be expected.
Order code: CONTI® SyNChrOflex 100 AT 10/1500
CONTI® SYNCHROFLEX
CONTI® SYNCHROFLEX Timing Belts used for transportation
Transport belts should be designed preferably with a
head drive. The goods to be transported can consist of
one or more individual loads. Multiple individual loads
can be seen as a line load.
load bearing sequence in a timing belt
head drive
Calculation of the Peripheral force FU
from the overall transport load, the required haul-off force
or the peripheral force fU for the drive pulley assemblies
can be derived:
fU = 9,81 · m · µ
Peripheral force at the drive pulley.
Mass of the items to be transported
friction factor of the timing belt
in relation to the bed plate
fU
m
[N]
[kg]
µ
As friction factor µ (slide friction), the following values
can be assumed:
Steel/PUr 92 Shore A
Pe/PUr
0,6 - 0,7
0,3 - 0,4
Information on the force/elongation behaviour
The grid surface in the picture shows the force/elongation behaviour in the timing belt under operating conditions. The individual spacing between the transported
products increases towards the drive pulley due to belt
elongation.
Centre s1 < s2
Pre-tension force
We recommend to set the pre-tension force in the
transport timing belt such that a residual pre-tension
force is always maintained on the slack span side under
operating conditions. The following pre-tension force is
required::
fV > 0,5 · fU
Calculating the Belt width b
In general, friction factors show large ranges. Trials
should be carried out, if necessary. errors and omissions excepted.
b =
f U:
fU
ze · fUspec
fU [N]
peripheral force (calculated)
fUspec: specific load of the belt teeth
z e:
number of teeth in mesh for endless joined belts:
zemax = 12
27
AT 3 GEN III
0,8
1,1
3
high performance AT profile with
metric pitch and trapezoidal teeth.
50º
Standard version:
• single-sided
AT 3
• high performance polyurethane in red colour
• steel cord tension members with high density
• steel cord tension members in
two-filament construction
1,2
1,5
• steel cord5 tension members in highly
flexible construction
AT
AT
AT
AT
AT
3
3
3
3
3
/ AT
270
20
/ 300
/ 351
/ 399
/ 417
AT
AT
AT
AT
AT
3
3
3
3
3
/
/
/
/
/
450
486 fN18
50140º
549
600
150
162
167
183
200
AT
AT
AT
AT
3
3
3
3
2
/ T639
/ 648
/ 648 fN24
/ 714
213
216
216
238
90
100
117
133
2 139
2,5mm:
Preferred belt width* in
6, 10, 16, 25, 32
AT
AT
AT
AT
3
3
3
3
5
50
67
67
84
89
4
/
/
/
/
/
/ 816
/ 816 fA
/ 900
/ 1011
272
272
300
337
20
40º
T 20
0,5
CONTI® SYNCHROFLEX Timing Belt (SFX) AT 3 GEN III
3
3
3
3
3
Number
of teeth
20
40º
T 20-DL
* Other dimensions upon request.
2,0
0,7
AT 3 Gen III
20
150
201
201 fN68
50º
252
267
AT
AT
AT
AT
AT
0,6
50º
Type / Length*
GEN III
Number
of teeth
0,6
0,8
3
1,1
Type / Length*
GEN III
50º
FA: with bigger back thickness
40º
FN: with profiles on the back of the belt
AT 5 Gen III
40º
T 2,5
0,7
0,6
2,5
1,2
5
1,5
M
50º
0,7
40º
AT 5
F,...
1
1
50º ® SYNCHROFLEX Timing Belt
CONTI
1,2
5
2,5
10
Order example
2,5
T 2,5-DL
70º
10 AT3 / 450 GEN III
40º
Belt width in mm
Type/
Pitch
AT 10
Gen
III
T5
Belt length in mm
K1
50º
1,2
5
1
28
2,5
10
2,5
Specification Generation III
1,5
CONTI® SYNCHROFLEX
AT 3 GEN III Technical data
1. Tooth shear strength (specific belt tooth strength)
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
40,43
40,00
39,60
39,21
38,85
1,93
1,91
1,89
1,87
1,86
0,00
0,04
0,08
0,12
0,16
2400
2500
2600
2800
3000
24,66
24,40
24,14
23,63
23,16
1,18
1,17
1,15
1,13
1,11
2,96
3,05
3,14
3,31
3,47
100
150
200
300
400
38,50
37,70
36,98
35,69
34,60
1,84
1,80
1,77
1,70
1,65
0,19
0,28
0,37
0,54
0,69
3200
3400
3600
3800
4000
22,71
22,30
21,90
21,53
21,16
1,09
1,07
1,05
1,03
1,01
3,63
3,79
3,94
4,09
4,23
500
600
700
800
900
33,64
32,79
32,03
31,34
30,70
1,61
1,57
1,53
1,50
1,47
0,84
0,98
1,12
1,25
1,38
4500
5000
5500
6000
6500
20,34
19,59
18,90
18,28
17,69
0,97
0,94
0,90
0,87
0,85
4,58
4,90
5,20
5,48
5,75
1000
1100
1200
1300
1400
30,11
29,56
29,05
28,58
28,13
1,44
1,41
1,39
1,36
1,34
1,51
1,63
1,74
1,86
1,97
7000
7500
8000
8500
9000
17,15
16,65
16,18
15,74
15,31
0,82
0,80
0,77
0,75
0,73
6,00
6,24
6,47
6,69
6,89
1500
1600
1700
1800
1900
27,70
27,30
26,91
26,55
26,20
1,32
1,30
1,29
1,27
1,25
2,08
2,18
2,29
2,39
2,49
9500
10000
12000
15000
18000
14,91
14,54
13,19
11,53
10,16
0,71
0,69
0,63
0,55
0,49
7,08
7,27
7,91
8,64
9,15
2000
2200
25,88
25,25
1,24
1,21
2,59
2,78
20000
9,38
0,45
9,37
Rotational speeds over 20000 rpm and/or belt speeds over 80 m/s
need special drive designs. Please ask our advice.
2. Tension member strength (permitted tensile force of the belt fzul ), Belt weight
Belt width
b
Tension member strength fzul
Belt weight
[mm]
6
10
16
25
32
[N]
330
599
1002
1608
2079
0,026
0,042
0,065
0,083
AT 3 GeN III [kg/m] 0,016
3. Flexibility (Minimum numbers of teeth, minimum diameter)
Timing pulley
Tension roller (smooth),
running on teeth
Timing pulley
running on the back of the belt
zmin
15
dmin [mm]
dmin
20
zmin
dmin
20
Drive type without contraflexure
zmin
[mm]
20
Drive type with contraflexure
zmin
dmin
29
5
1,1
0,8
20
50º
AT 3
40º
AT 20
CONTI® SYNCHROFLEX Timing Belt (SFX) AT 3
1,2
1,5
metric pitch5and trapezoidal teeth.
The technical
data refer to standard polyurethane
50º
and standard steel cord tension members.
Available
AT
5 Gen IIIversions:
• single-sided
• with reinforced design
3
3
3
3
3
/
/
/
/
/
AT
AT
AT
AT
AT
3
3
3
3
3
/ 270
T2
/ 300
/ 351
/ 399
/ 417
90
100
117
133
139
AT
AT
AT
AT
AT
3
3
3
3
3
/
/
/
/
/
150
162
167
183
200
AT
AT
AT
AT
3
3
3
3
/ 639
/ T648
2,5
/ 648 fN24
/ 714
150
201
201 fN68
25240º
267
2
450
2,5
486 fN18
501
549
40º
600
50
67
67
84
89
50º
• antistatic,
coloured, mechanical reworked
/ Length*
Number
of teeth
AT
AT
AT
AT
/ 816
/ 816 fA
/ 900
/ 1011
272
272
300
337
3
3
3
3
0,5
AT
AT
AT
AT
AT
Type
0,6
Number
of teeth
20
40º
T 20-DL
2,0
40º
213
216
216
238
Preferred belt width* in
2,5mm:
6, 10, 16, 25, 32
1,2
1,5
• with Aramide tension member
5
• polyurethane special materials
upon request
/ Length*
0,7
AT 3
Type
M
0,7
50º
T 20
0,6
0,8
3
1,1
AT 3 Gen III
0,6
50º
20
4
3
40º
0,7
AT 5
F,...
1
1
1,2
5
2,5
10
2,5
T 2,5-DL
70º
50º
40º
AT 10 Gen III
5
1
Order example
1,2
K1
2,5
2,5
10
T5
1,5
50º
CONTI® SYNCHROFLEX Timing Belt
10 AT3 / 450
40º
70º
1,2
Belt width in mm
AT 10
Type/ Pitch
Belt length in mm
2,5
K 1,5
2,5
10
2
30
T 5-DL
2,5
10
CONTI® SYNCHROFLEX
AT 3 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
32,34
32,00
31,68
31,37
31,08
1,544
1,528
1,513
1,498
1,484
0,000
0,032
0,063
0,094
0,124
2200
2400
2500
2600
2800
20,20
19,73
19,52
19,31
18,90
0,964
0,942
0,932
0,922
0,902
2,222
2,367
2,440
2,510
2,646
100
150
200
300
400
30,80
30,16
29,58
28,55
27,68
1,471
1,440
1,412
1,363
1,322
0,154
0,226
0,296
0,428
0,554
2880
3000
3200
3400
3600
18,75
18,53
18,17
17,84
17,52
0,895
0,885
0,868
0,852
0,837
2,700
2,779
2,907
3,033
3,153
500
600
700
730
800
26,91
26,23
25,62
25,45
25,07
1,285
1,252
1,223
1,215
1,197
0,673
0,787
0,897
0,929
1,003
3800
4000
4500
5000
5500
17,22
16,93
16,27
15,67
15,12
0,822
0,808
0,777
0,748
0,722
3,272
3,386
3,660
3,917
4,158
900
1000
1100
1200
1300
24,56
24,09
23,65
23,24
22,86
1,173
1,150
1,129
1,110
1,091
1,105
1,204
1,301
1,394
1,486
6000
6500
7000
7500
8000
14,62
14,15
13,72
13,32
12,94
0,698
0,676
0,655
0,636
0,618
4,386
4,598
4,802
4,995
5,176
1400
1460
1500
1600
1700
22,50
22,29
22,16
21,84
21,53
1,074
1,064
1,058
1,043
1,028
1,575
1,627
1,662
1,747
1,830
8500
9000
9500
10000
12000
12,59
12,25
11,93
11,63
10,55
0,601
0,585
0,570
0,555
0,504
5,350
5,512
5,666
5,815
6,330
1800
1900
2000
21,24
20,96
20,70
1,014
1,001
0,988
1,911
1,991
2,070
15000
18000
20000
9,22
8,13
7,50
0,440
0,388
0,358
6,914
7,316
7,499
Belt width
b
[mm]
6
10
16
25
32
[N]
190
380
646
1102
1406
Belt weight
[kg/m] 0,014
0,023
0,037
0,058
0,074
AT 3
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
zmin
dmin
20
zmin
dmin
20
[mm]
20
zmin
dmin
31
AT 20
AT 3 Gen III
T 20
50º
20
40º
40º
AT 5 GEN III
AT 3
0,5
2
1,1
0,8
3
0,6
T2
T 20-DL
50º
Standard version:
• single-sided
AT
5 performance polyurethane in
• high
red colour
2,5
2,5
• steel cord tension members with
high density
10
50ºcord tension members in highly
• steel
flexible construction
AT
Genbigger
III
FA:10with
back thickness
AT
AT
AT
AT
AT
5
5
5
5
5
/
/
/
/
/
AT
AT
AT
AT
AT
5
5
5
5
5
/ 525
/ T545
2,5-DL
/ 600
/ 610
/ 620
AT
AT
AT
AT
AT
5
5
5
5
5
/
/
/
/
/
450
455
480
49040º
500
66
68
75
78
84
2,5
90
91
96
98
100
105
109
120
122
5 124
630
660
67040º
690
710
126
132
134
138
142
5
5
5
5
5
/
/
/
/
/
720
750
780
825
860
144
150
156
165
172
AT
AT
AT
AT
AT
5
5
5
5
5
/ 875
/ 900
/ 920
/ 975
/ 1050
175
180
184
195
210
/
/
/
/
/
225
246
300
350
400
0,7
/ 330
/ T340
2,5
/ 375
/ 390
/ 420
AT
AT
AT
AT
AT
0,6
5
5
5
5
5
45
51
52
56
60
AT
AT
AT
AT
AT
5
5
5
5
5
AT 5
AT 5
1125
1230
1500
1750
2000
/ 3350 fA**
/ 3800 fA**
670
760
40º
M
F,...
70º
T5
2,5
2,0
1
K1
Preferred belt width* in mm:
6, 10, 16, 25, 32, 50, 75, 100
** Please request technical support
1,2
from your Mulco sales partner.
5
1
2,5
10
AT
AT
AT
AT
AT
2,5
0,7
1,2
1,5
5
225
255
260
280
40º
300
Number
of teeth
1,2
/
/
/
/
/
0,6
AT 5 Gen III
5
5
5
5
5
Type / Length*
GEN III
0,7
50º
AT
AT
AT
AT
AT
Number
of teeth
1
1,2
5
1,5
Type / Length*
GEN III
1,5
50º
40º
70º
1,2
AT 10
T 5-DL
K 1,5
2,5
2,5
10
2
Order example
ATPCONTI
10 Gen
III
®
SYNCHROFLEX
Timing Belt 50 AT5 / 450 GEN III
2,5
10
t
40º
Belt length in mm
2,5
10
Type / Pitch
2,5
Belt width in mm
40º
T 10
k
ATP 10
10
2
32
2,5
V
CONTI® SYNCHROFLEX
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
44,13
43,63
43,13
42,63
42,25
3,51
3,48
3,44
3,40
3,36
0,00
0,07
0,14
0,21
0,28
2000
2200
2400
2600
2800
27,38
26,63
26,00
25,38
24,80
2,18
2,12
2,07
2,02
1,97
4,56
4,89
5,20
5,50
5,79
100
200
300
400
500
41,88
40,00
38,63
37,25
36,25
3,33
3,19
3,08
2,96
2,88
0,35
0,67
0,96
1,24
1,51
3000
3200
3400
3600
3800
24,28
23,76
23,30
22,85
22,41
1,93
1,89
1,85
1,82
1,78
6,06
6,34
6,60
6,85
7,10
600
700
800
900
1000
35,25
34,28
33,50
32,88
32,13
2,80
2,74
2,68
2,61
2,56
1,76
2,00
2,24
2,46
2,68
4000
4500
5000
5500
6000
22,01
21,08
20,23
19,45
18,75
1,85
1,68
1,61
1,55
1,49
7,34
7,90
8,43
8,91
9,38
1100
1200
1300
1400
1500
31,50
31,00
30,38
29,88
29,38
2,51
2,64
2,42
2,38
2,34
2,89
3,10
3,30
3,49
3,68
6500
7000
7500
8000
8500
18,10
17,49
16,93
16,39
15,89
1,44
1,39
1,35
1,30
1,26
9,80
10,20
10,58
10,93
11,25
1600
1700
1800
1900
29,00
28,50
28,13
27,75
2,30
2,27
2,24
2,21
3,86
4,04
4,21
4,39
9000
9500
10000
15,41
14,96
14,54
1,23
1,19
1,16
11,55
11,84
12,11
Belt width
b
Belt weight
[mm]
6
10
16
25
32
50
75
100
[N]
417
787
1342
2175
2823
4489
6803
9117
0,022
0,036
0,058
0,090
0,115
0,180
0,270
0,360
AT 5 GeN III [kg/m]
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
dmin
20
zmin
dmin
25
zmin
[mm]
60
zmin
dmin
33
AT 3
T2
1,2
1,5
2,5
2,0
0,7
5
0,6
T 20-DL
50º
40º
AT 5
AT 5 Gen III
40º
50º
The technical data refer to standard polyurethane
AT 10 Gen III
2,5
10
• single-sided
2,5
Available versions:
• with “E” tension member for
a better flexibility
50º
AT
10
• polyurethane
special materials
upon request
AT
AT
AT
AT
AT
5
5
5
5
5
/
/
/
/
/
AT
AT
AT
AT
AT
5
5
5
5
5
/ T525
5
/ 545
/ 600
/ 610
/ 620
AT
AT
AT
AT
AT
5
5
5
5
5
/
/
/
/
/
5
450
455
48040º
490
500
5
5
5
5
5
/
/
/
/
/
720
750
780
825
860
144
150
156
165
172
5
5
5
5
5
/ 875
/ 900
/ 920
/ 975
/ 1050
175
180
184
195
210
/
/
/
/
/
225
246
300
350
400
66
68
75
78
84
AT
AT
AT
AT
AT
90
91
96
98
100
AT
AT
AT
AT
AT
105
109
120
122
5
124
630
660
40º
670
690
710
AT
AT
AT
AT
AT
0,7
/ 330
/ 340
T 2,5-DL
/ 375
/ 390
/ 420
45
51
52
56
60
0,6
5
5
5
5
5
2,5
5
5
5
5
5
AT 5
AT 5
126
132
134
138
142
1125
1230
1500
1750
2000
/ 3350 fA**
/ 3800 fA**
Number
of teeth
670
760
M
F,...
1
70º
K1
1,5
70º
T 5-DL
10, 16, 25, 32, 50
2,5
2,5
• antistatic, coloured,
10 reworked
mechanical
AT
AT
AT
AT
AT
225
255
260
28040º
300
1,2
/
/
/
/
/
/ Length*
1,2
2,5
2,5
10
5
5
5
5
5
Type
0,7
AT
AT
AT
AT
AT
Number
of teeth
1
AT 5
/ Length*
1
50º
Type
1,2
1,5
5
1,2
T 2,5
* Other dimensions upon request.K 1,5
2,5
2
10
t
ATP 10 Gen III
40º
2,5
10
2,5
40º
T 10
k
Order example
10
2
ATP 10
Belt width in mm
3,75
15
2,85
10 AT5 / 450
t
40º
k2
2,5
Type / Pitch
Belt length in mm
2,5
V
40
T 10-DL
40º
ATP 15
34
k1
CONTI® SYNCHROFLEX
AT 5 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
35,3
34,9
34,5
34,1
33,8
2,810
2,780
2,750
2,720
2,690
0,000
0,058
0,115
0,171
0,225
2000
2200
2400
2600
2800
21,9
21,3
20,8
20,3
19,84
1,740
1,695
1,654
1,615
1,579
3,650
3,910
4,160
4,400
4,63
100
200
300
400
500
33,5
32,0
30,9
29,8
29,0
2,660
2,550
2,460
2,370
2,300
0,279
0,534
0,771
0,995
1,207
3000
3200
3400
3600
3800
19,42
19,01
18,64
18,28
17,93
1,545
1,513
1,483
1,454
1,427
4,85
5,07
5,28
5,48
5,68
600
700
800
900
1000
28,2
27,5
26,8
26,3
25,7
2,240
2,190
2,140
2,090
2,050
1,409
1,603
1,789
1,969
2,140
4000
4500
5000
5500
6000
17,61
16,86
16,18
15,56
15,00
1,401
1,342
1,288
1,239
1,194
5,87
6,32
6,74
7,13
7,50
1100
1200
1300
1400
1500
25,2
24,8
24,3
23,9
23,5
2,010
1,970
1,936
1,903
1,872
2,310
2,480
2,640
2,790
2,940
6500
7000
7500
8000
8500
14,48
13,99
13,54
13,11
12,71
1,152
1,113
1,077
1,043
1,011
7,84
8,16
8,46
8,74
9,00
1600
1700
1800
1900
23,2
22,8
22,5
22,2
1,843
1,816
1,789
1,764
3,090
3,230
3,370
3,510
9000
9500
10000
12,33
11,97
11,63
0,981
0,953
0,925
9,24
9,47
9,69
Belt width
b
[mm]
6
10
16
25
32
50
75
100
[N]
350
700
1260
2030
2660
4200
6370
8610
Belt weight
[kg/m]
0,020
0,034
0,054
0,085
0,109
0,170
0,255
0,340
AT 5
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
dmin
20
zmin
dmin
25
zmin
[mm]
60
zmin
dmin
35
Polyurethane
ATTiming
5 Gen IIIBelts
T 2,5
1,2
1,5
2,5
0,7
5
0,6
M
50º
40º
0,7
AT 10 GEN III
AT 5
50ºpitch and trapezoidal teeth.
metric
Standard version:
AT 10
• single-sided
2,5
2,5
• high performance polyurethane in
red colour
10
• steel cord tension members with
high density
ATP 10 Gen III
2,5
10
2,5
5
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1150
1200
1210
1250
1280
115
120
121
125
128
AT
AT
AT
AT
AT
10
10
10
10
10
/ 580
5
/ T600
/ 610
/ 660
/ 700
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1300
1320
1350
1360
1360 fN2
130
132
135
136
136
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
AT
AT
AT
AT
AT
10
10
10
10
10
/ T880
5-DL
/ 890
/ 920
/ 960
/ 980
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
5
730
780
80040º
840
840 fN2
1000
1010
1050
40º
1080
1100
44
46
50
56
57
58
60
61
66
70
73
78
80
84
84
10
88
89
92
96
98
100
101
105
108
110
1,2
/
/
/
/
/
1
10
10
10
10
10
1,2
AT
AT
AT
AT
AT
440
460
500
56040º
570
Number
of teeth
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1400
1480
1500
1600
1700
140
148
150
160
170
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1720
1800
1860
1940
2910 fN2
172
180
186
194
291
1
70º
K1
1,5
70º
K 1,5
2,5
2,5
2,5
10
Type / Length*
GEN III
1
AT 10 Gen III
Number
of teeth
1,2
50º
Type / Length*
GEN III
2
2,5
10
2,5
T 2,5-DL
F,...
t
40º
T 10
16, 25, 32, 50, 75, 100, 150
k
10
2
ATP 10
k2
2,5
2,85
t
40º
3,75
15
2,5
V
40
T 10-DL
40º
ATP 15
k1
Order example
Belt width in mm
Type / Pitch
Belt length in mm
36
32 AT10 / 800 GEN III
V-DL
CONTI® SYNCHROFLEX
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
91,88
90,50
89,25
88,13
87,00
14,63
14,41
14,21
14,01
13,84
0,00
0,30
0,60
0,88
1,16
2000
2200
2400
2600
2800
50,38
48,75
47,25
45,75
44,38
8,03
7,75
7,51
7,29
7,08
16,80
17,88
18,88
19,83
20,73
100
200
300
400
500
85,88
81,25
77,63
74,38
71,75
13,68
12,94
12,35
11,85
11,41
1,43
2,71
3,88
4,96
5,98
3000
3200
3400
3600
3800
43,13
42,00
40,88
39,88
38,88
6,88
6,69
6,50
6,34
6,18
21,59
22,40
23,16
23,89
24,59
600
700
800
900
1000
69,38
67,13
65,25
63,50
61,88
11,04
10,69
10,39
10,10
9,85
6,94
7,84
8,70
9,53
10,31
4000
4500
5000
5500
6000
37,88
35,63
33,63
31,88
30,25
6,03
5,68
5,36
5,08
4,81
25,25
26,75
28,13
29,25
30,25
1100
1200
1300
1400
1500
60,38
59,00
57,75
56,50
55,38
9,61
9,39
9,19
8,99
8,80
11,08
11,80
12,50
13,18
13,84
6500
7000
7500
8000
8500
28,75
27,25
26,00
24,71
23,55
4,56
4,34
4,13
3,94
3,75
31,13
31,88
32,50
33,00
33,38
1600
1700
1800
1900
54,25
53,25
52,25
51,25
8,64
8,48
8,31
8,16
14,46
15,08
15,68
16,25
9000
9500
10000
22,44
21,40
20,40
3,58
3,40
3,25
33,63
33,88
34,00
Belt width
b
Belt weight
[mm]
16
25
32
50
75
100
150
[N]
3000
5000
6750
10750
16500
22000
33500
0,117
0,183
0,234
0,365
0,548
0,730
1,095
AT 10 GeN III [kg/m]
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
dmin
25
zmin
dmin
50
zmin
[mm]
120
zmin
dmin
37
40º
0,7
AT 5
F,...
T 2,5-DL
1
1
70º
AT 10
40º
• single-sided
2,5
Available versions:
10
2,5
ATP 10
Gen III steel cord tension members.
and
standard
• with “E” tension member for
a better flexibility
•ATP
with
Aramide tension member
10
3,75
mechanical reworked
2,85
• polyurethane special materials
upon request
• antistatic,15coloured,
10
10
10
10
10
/ 580
/ 600
/ T610
5-DL
/ 660
/ 700
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
AT
AT
AT
AT
AT
10
10
10
10
10
/ 880
/ 890
10
/ T920
/ 960
/ 980
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
5
730
780
10
800
840
840 fN2
40º
1000
1010
1050
1080
1100
40º
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1150
1200
1210
1250
1280
115
120
121
125
128
58
60
61
66
70
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1300
1320
1350
1360
1360 fN2
130
132
135
136
136
73
78
80
84
84
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1400
1480
1500
1600
1700
140
148
150
160
170
AT
AT
AT
AT
AT
10
10
10
10
10
/
/
/
/
/
1720
1800
1860
1940
2910 fN2
172
180
186
194
291
44
46
50
56
57
88
89
92
96
98
100
10 101
105
108
110
16, 25, 32, 50, 75, 100
1,2
AT
AT
AT
AT
AT
440
460
500
560
57040º
1
/
/
/
/
/
/ Length*
2,5
10
10
10
10
10
Type
Number
of teeth
K1
1,5
70º
K 1,5
t
40º
k
V
2,5
2,5
10
2,5
AT
AT
AT
AT
AT
Number
of teeth
1,2
AT 10
T5
/ Length*
2
50º
Type
2
2,5
10
2,5
AT 10 Gen III
t
k2
2,5
50º
1,2
5
2,5
10
2,5
40
T 10-DL
40º
ATP 15
k1
V-DL
Order example
Belt width in mm
Type / Pitch
Belt length in mm
38
32 AT10 / 800
CONTI® SYNCHROFLEX
AT 10 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
73,5
72,4
71,4
70,5
69,6
11,70
11,53
11,37
11,21
11,07
0,000
0,241
0,476
0,705
0,928
2000
2200
2400
2600
2800
40,30
39,00
37,80
36,60
35,50
6,42
6,20
6,01
5,83
5,66
13,44
14,30
15,10
15,86
16,58
100
200
300
400
500
68,7
65,0
62,1
59,5
57,4
10,94
10,35
9,88
9,48
9,13
1,145
2,170
3,100
3,970
4,780
3000
3200
3400
3600
3800
34,50
33,60
32,70
31,90
31,10
5,50
5,35
5,20
5,07
4,94
17,27
17,92
18,53
19,11
19,67
600
700
800
900
1000
55,5
53,7
52,2
50,8
49,5
8,83
8,55
8,31
8,08
7,88
5,550
6,270
6,960
7,620
8,250
4000
4500
5000
5500
6000
30,30
28,50
26,90
25,50
24,20
4,82
4,54
4,29
4,06
3,85
20,20
21,40
22,50
23,40
24,20
1100
1200
1300
1400
1500
48,3
47,2
46,2
45,2
44,3
7,69
7,51
7,35
7,19
7,04
8,860
9,440
10,000
10,540
11,070
6500
7000
7500
8000
8500
23,00
21,80
20,80
19,77
18,84
3,65
3,47
3,30
3,15
3,00
24,90
25,50
26,00
26,40
26,70
1600
1700
1800
1900
43,4
42,6
41,8
41,0
6,91
6,78
6,65
6,53
11,570
12,060
12,540
13,000
9000
9500
10000
17,95
17,12
16,32
2,86
2,72
2,60
26,90
27,10
27,20
Belt width
b
[mm]
16
25
32
50
75
100
150
[N]
2000
3500
4750
7750
12000
16000
24500
Belt weight
[kg/m]
0,101
0,158
0,202
0,315
0,473
0,630
0,945
AT 10
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
dmin
25
zmin
dmin
50
zmin
[mm]
120
zmin
dmin
39
70º
50º
40º
AT 10 Gen III
T5
K1
1
5
50º
1,2
2,5
10
2,5
ATP high performance Timing Belts
1,5
ATP 10 GEN III
40º
70º
2,5
10
2,5
CONTI® SYNCHROFLEX Timing Belt (SFX) ATP 10 GEN III
high performance ATP profile with metric
pitch and optimised meshing of the double
engagement toothform.
/
/
/
/
/
630
660
700
780
840
ATP
ATP
ATP
ATP
ATP
10
10
10
10
10
/ 890
40º
/ 920
/ 1010
/ 1080
/T 10
1150
10
63
66
70
78
84
ATP
ATP
ATP
ATP
/
/
/
/
1280
1400
1650
1800
128
140
165
180
K 1,5
t
89
92
101
108
115
40º
k
16, 25, 32, 50, 75, 100, 150
V
10
2
ATP
10
Standard
version
10
10
10
10
Number
of teeth
2,5
10
10
10
10
10
Type / Length*
GEN III
2,5
ATP 10 Gen III
ATP
ATP
ATP
ATP
ATP
Number
of teeth
2
2,5
2,5
10
Type / Length*
GEN III T 5-DL
1,2
AT 10
• single-sided
3,75
2,85
• high performance
polyurethane in red colour
15
t
40º
k2
2,5
40
T 10-DL
40º
ATP 15
k1
V-DL
Order example
Belt width in mm
Type / Pitch
Belt length in mm
40
32 ATP10 / 780 GEN III
CONTI® SYNCHROFLEX
ATP 10 GEN III Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
105,050
103,508
102,064
100,706
99,424
16,713
16,468
16,238
16,023
15,818
0,000
0,345
0,680
1,007
1,326
2000
2200
2400
2600
2800
57,636
55,722
53,957
52,318
50,790
9,170
8,865
8,584
8,324
8,081
19,205
20,425
21,575
22,663
23,694
100
150
200
300
400
98,210
95,432
92,956
88,706
85,093
15,626
15,183
14,790
14,110
13,538
1,637
2,385
3,098
4,433
5,671
3000
3200
3400
3600
3800
49,358
48,010
46,737
45,532
44,387
7,853
7,638
7,436
7,245
7,062
24,671
25,597
26,476
27,310
28,102
500
600
700
800
900
81,989
79,257
76,817
74,614
72,604
13,045
12,609
12,222
11,871
11,551
6,830
7,923
8,985
9,945
10,887
4000
4500
5000
5500
6000
43,297
40,780
38,513
36,452
34,561
6,888
6,488
6,127
5,799
5,499
28,855
30,575
32,084
33,403
34,549
1000
1100
1200
1300
1400
70,758
69,049
67,461
65,975
64,580
11,257
10,986
10,733
10,496
10,275
11,789
12,654
13,487
14,290
15,063
6500
7000
7500
8000
8500
32,815
31,194
29,679
28,260
26,923
5,221
4,963
4,722
4,496
4,283
35,538
36,380
37,087
37,666
38,128
1500
1600
1700
1800
1900
63,265
62,022
60,844
59,723
58,655
10,065
9,868
9,680
9,502
9,332
15,811
16,534
17,234
17,911
18,568
9000
9500
10000
25,661
24,464
23,328
4,082
3,892
3,711
38,477
38,721
38,865
Belt width
b
[mm]
16
25
32
50
75
100
150
[N]
3000
5000
6750
10750
16500
22000
33500
Belt weight
[kg/m]
0,109
0,170
0,218
0,340
0,510
0,680
1,020
ATP 10 GeN III
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
dmin
25
zmin
dmin
50
zmin
[mm]
120
zmin
dmin
41
1,5
50º
40º
70º
T 5-DL
ATP 10
3,75
15
2,85
CONTI® SYNCHROFLEX Timing Belt (SFX) ATP 10
10
10
10
10
10
/ 630
T 10
/ 660
/ 700
/ 780
/ 840
ATP
ATP
ATP
ATP
ATP
10
10
10
10
10
/ 890
/ 920
/ 1010
40º
/ 1080
/ 1150
ATP
ATP
ATP
ATP
63
66
70
78
84
10
89
92
101
108
115
T 10-DL
16, 25, 32, 50,
75, 100
/ Length*
10
10
10
10
/
/
/
/
1280
1400
1650
1800
Number
of teeth
128
140
165
180
40º
k
V
2,5
ATP
ATP
ATP
ATP
ATP
t
Type
Number
of teeth
2
ATP 10
/ Length*
40º
t
k2
2,5
2,5
2,5
Type
2,5
2
10
ATP 10 Gen III
10
K 1,5
2,5
2,5
10
1,2
AT 10
40
40º
The 15
technical data refer to standard polyurethane
ATP
k1
V-DL
Available versions:
• single-sided
• with “E” tension member for a better flexibility
• with reinforced tension member design
• polyurethane special materials upon request
(Standard: 93ShA, colour: red)
• antistatic, coloured, mechanical reworked
Order example
Belt width in mm
Type / Pitch
Belt length in mm
42
32 ATP10 / 780
CONTI® SYNCHROFLEX
ATP 10 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
95,500
94,098
92,785
91,551
90,385
15,199
14,976
14,767
14,571
14,385
0,000
0,314
0,619
0,915
1,205
1900
2000
2200
2400
2600
53,323
52,396
50,656
49,052
47,562
8,487
8,339
8,062
7,807
7,570
16,884
17,464
18,572
19,619
20,609
100
150
200
300
400
89,282
86,756
84,505
80,642
77,357
14,210
13,808
13,449
12,835
12,312
1,488
2,169
2,817
4,032
5,157
2800
2880
3000
3200
3400
46,173
45,642
44,871
43,645
42,488
7,349
7,264
7,141
6,946
6,762
21,546
21,907
22,434
23,276
24,075
500
600
700
730
800
74,535
72,052
69,834
69,212
67,831
11,863
11,467
11,114
11,015
10,796
6,211
7,205
8,147
8,420
9,043
3600
3800
4000
4500
5000
41,393
40,352
39,361
37,073
35,012
6,588
6,422
6,264
5,900
5,572
24,834
25,554
26,239
27,803
29,175
900
1000
1100
1200
1300
66,004
64,325
62,772
61,328
59,977
10,505
10,238
9,990
9,761
9,546
9,900
10,720
11,507
12,265
12,994
5500
6000
6500
7000
7500
33,138
31,419
29,832
28,358
26,981
5,274
5,000
4,748
4,513
4,294
30,374
31,417
32,316
33,082
33,724
1400
1460
1500
1600
1700
58,709
57,984
57,514
56,348
55,313
9,344
9,228
9,154
8,968
8,803
13,698
14,108
14,377
15,025
15,671
8000
8500
9000
9500
10000
25,691
24,475
23,328
22,240
21,207
4,089
3,895
3,713
3,540
3,375
34,252
34,670
34,989
35,211
35,342
1800
54,294
8,641
16,287
need special drive designs. Please ask for our advice.
Belt width
b
[mm]
16
25
32
50
75
100
150
[N]
2000
3500
4750
7750
12000
16000
24500
Belt weight
[kg/m]
0,096
0,150
0,192
0,300
0,450
0,600
0,900
ATP 10
Timing pulley
running on teeth
Timing pulley
zmin
15
dmin [mm]
zmin
dmin
50
zmin
dmin
25
[mm]
120
zmin
dmin
43
Type / Length*
GEN III
3,75
15
2,85
ATP 15 GEN III
ATP 15
ATP 15
/
/
1125
1185
Number
of teeth
75
79
25, 32, 50, 75, 100, 150
ATP 15 Gen III
CONTI® SYNCHROFLEX Timing Belt (SFX) ATP 15 GEN III
5
4
20
50º
Standard version
• single-sided
AT 20 Gen III
Order example
Belt width in mm
Type / Pitch
Belt length in mm
44
32 ATP15 / 1260 GEN III
Type / Length*
GEN III
ATP 15
ATP 15
/
/
1260
1560
Number
of teeth
84
104
CONTI® SYNCHROFLEX
ATP 15 GEN III Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
157,672
155,054
152,609
150,315
148,155
37,641
37,016
36,433
35,885
35,369
0,000
0,775
1,526
2,255
2,963
2200
2400
2600
2800
3000
76,062
73,182
70,510
68,018
65,683
18,158
17,471
16,833
16,238
15,681
41,834
43,909
45,831
47,612
49,262
100
150
200
300
400
146,114
141,455
137,318
130,215
124,258
34,882
33,770
32,782
31,087
29,664
3,653
5,305
6,866
9,766
12,426
3200
3400
3600
3800
4000
63,486
61,413
59,449
57,584
55,809
15,156
14,661
14,192
13,747
13,323
50,789
52,201
53,504
54,705
55,809
500
600
700
800
900
119,128
114,623
110,606
106,984
103,684
28,440
27,364
26,405
25,540
24,753
14,891
17,193
19,356
21,397
23,329
4500
5000
5500
6000
6500
51,711
48,022
44,667
41,591
38,751
12,345
11,464
10,663
9,929
9,251
58,175
60,027
61,417
62,386
62,970
1000
1100
1200
1300
1400
100,564
97,853
95,250
92,817
90,535
24,029
23,361
22,739
22,159
21,614
25,163
26,910
28,575
30,166
31,687
7000
7500
8000
8500
9000
36,113
33,651
31,342
29,169
27,116
8,621
8,034
7,482
6,964
6,474
63,198
63,095
62,684
61,984
61,012
1500
1600
1700
1800
1900
88,385
86,353
84,427
82,596
80,851
21,100
20,615
20,155
19,718
19,302
33,144
34,541
35,881
37,168
38,404
9500
10000
25,171
23,324
6,009
5,568
59,782
58,309
2000
79,185
18,904
39,592
Belt width
b
[mm]
25
32
50
75
100
150
[N]
6300
8550
13950
21600
28800
44100
Belt weight
[kg/m]
0,218
0,279
0,436
0,654
0,872
1,308
ATP 15 GeN III
Timing pulley
running on teeth
Timing pulley
zmin
20
dmin [mm]
zmin
dmin
100
zmin
dmin
30
[mm]
160
zmin
dmin
45
2
2,5
10
t
ATP 10 Gen III
40º
2,5
10
2,5
40º
T 10
k
ATP 15
2
Type / Length*
GEN III
40º
3,75
2,85
15
ATP 15 /
ATP 15 /
1125
1185
Number
of teeth
75
79
Type / Length*
GEN III
ATP 15 /
ATP 15 /
2,5
10
ATP 10
2,5
V
1260
1560
Number
of teeth
t
k2
84
104
40
T 10-DL
25, 32, 50, 75, 100, 150
ATP 15
40º
k1
CONTI® SYNCHROFLEX Timing Belt (SFX) ATP 15
V-DL
Available versions:
• single-sided
• with reinforced tension member design
(Standard: 93ShA, colour: red)
Order example
Belt width in mm
Type / Pitch
Belt length in mm
46
32 ATP15 / 1260
CONTI® SYNCHROFLEX
ATP 15 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
143,325
140,945
138,722
136,637
134,674
34,216
33,648
33,117
32,620
32,151
0,000
0,705
1,387
2,050
2,693
2200
2400
2600
2800
3000
69,141
66,523
64,094
61,828
59,706
16,506
15,881
15,301
14,760
14,254
38,027
39,914
41,661
43,280
44,779
100
150
200
300
400
132,818
128,584
124,832
118,367
112,952
31,708
30,697
29,799
28,258
26,965
3,320
4,822
6,241
8,877
11,295
3200
3400
3600
3800
4000
57,709
55,824
54,040
52,345
50,731
13,777
13,327
12,901
12,496
12,111
46,167
47,451
48,636
49,727
50,731
500
600
700
800
900
108,288
104,193
100,542
97,249
94,249
25,852
24,874
24,003
23,216
22,500
13,536
15,629
17,595
19,450
21,206
4500
5000
5500
6000
6500
47,006
43,652
40,602
37,806
35,225
11,222
10,421
9,693
9,026
8,409
52,881
54,565
55,828
56,709
57,240
1000
1100
1200
1300
1400
91,495
88,949
86,583
84,372
82,297
21,843
21,235
20,670
20,142
19,647
22,874
24,461
25,975
27,421
28,804
7000
7500
8000
8500
9000
32,827
30,589
28,490
26,515
24,649
7,837
7,303
6,802
6,330
5,884
57,447
57,354
56,980
56,344
55,460
1500
1600
1700
1800
1900
80,343
78,495
76,745
75,080
73,494
19,180
18,739
18,321
17,924
17,545
30,128
31,398
32,616
33,786
34,910
9500
10000
22,881
21,201
5,462
5,061
54,342
53,003
2000
71,980
17,184
35,990
Belt width
b
[mm]
25
32
50
75
100
150
[N]
4950
6750
11250
17550
23850
36450
Belt weight
[kg/m]
0,200
0,256
0,400
0,600
0,800
1,200
ATP 15
Timing pulley
running on teeth
Timing pulley
zmin
20
dmin [mm]
dmin
30
zmin
dmin
100
zmin
[mm]
60
zmin
dmin
47
3,75
15
2,85
AT 20 GEN III
ATP 15 Gen III
Type / Length*
GEN III
5
4
20
50º
AT 20 Gen III
metric pitches and trapezoidal teeth.
AT
AT
AT
AT
AT
20
20
20
20
20
/
/
/
/
/
1000 **
1100
1200 **
1260
1500 **
50
55
60
63
75
AT
AT
AT
AT
AT
20
20
20
20
20
/
/
/
/
/
1600 **
1700
1760 **
1800
1900 **
80
85
88
90
95
32, 50, 75, 100
Standard version:
• single-sided
Order example
Belt width in mm
Type / Pitch
Belt length in mm
48
Number
of teeth
32 AT20 / 1000 GEN III
Type / Length*
GEN III
AT 20 / 1960 **
Number
of teeth
98
** In combination with reduced pulley gap
please ask for technical support from
your Mulco sales partner.
CONTI® SYNCHROFLEX
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
183,750
180,310
177,108
174,112
171,298
58,489
57,395
56,375
55,422
54,526
0,000
1,202
2,361
3,482
4,568
2000
2200
2400
2600
2800
83,380
79,444
75,816
72,451
69,314
26,541
25,288
24,133
23,062
22,063
55,587
58,259
60,653
62,791
64,693
100
150
200
300
400
168,645
162,609
157,268
148,138
140,512
53,682
51,760
50,060
47,154
44,726
5,622
8,130
10,485
14,814
18,735
3000
3200
3400
3600
3800
66,375
63,612
61,003
58,534
56,189
21,128
20,248
19,418
18,632
17,886
66,375
67,852
69,137
70,241
71,173
500
600
700
800
900
133,963
128,226
123,120
118,521
114,336
42,642
40,816
39,190
37,726
36,394
22,327
25,645
28,728
31,606
34,301
4000
4500
5000
5500
6000
53,957
48,806
44,170
39,955
36,091
17,175
15,535
14,060
12,718
11,488
71,943
73,209
73,617
73,251
72,183
1000
1100
1200
1300
1400
110,498
106,953
103,660
100,585
97,701
35,173
34,044
32,996
32,017
31,099
36,833
39,216
41,464
43,587
45,594
6500
32,525
10,353
70,470
1500
1600
1700
1800
1900
94,986
92,421
89,990
87,681
85,481
30,235
29,419
28,645
27,910
27,209
47,493
49,291
50,995
52,608
54,138
Belt width
b
[mm]
25
32
50
75
100
150
[N]
6300
8550
13950
21600
28800
44100
Belt weight
[kg/m]
0,290
0,371
0,583
0,87
1,16
1,74
AT 20 GeN III
Timing pulley
running on teeth
Timing pulley
zmin
18
dmin [mm]
zmin
dmin
120
zmin
dmin
25
[mm]
180
zmin
dmin
49
AT 20
40º
1000 **20
1100
1200 **
40º
1260
1500 **
50
55
60
63
75
20 T /201600 **
80
20 / 1700
85
20 / 1760 **
88
20 / 1800
90
20 / 1900 **
95
20
32, 50, 75, 100
5
T 20-DL
• single-sided
40º
0,51
2,032
0,7
0,6
• antistatic,
2,5coloured, mechanical reworked
0,64
40º
T 2,5
de
u
e
0,7
0,6
M
0,7
40º
F,...
1,2
1
1
40º
50 AT20 / 1500
0,5
0,45
T 2,5-DL
5
Order example
70º
Belt width in mm
Type / Pitch
1
5
50
1,5
0,6
0,6
K1
Belt length in mm
1,2
T5
98
40º
T2
2,5
Number
of teeth
AT
AT
AT
AT
AT
Available versions:
/ Length*
AT 20 / 1960 **
5
0,5
0,6
2
metric pitches and trapezoidal teeth.
/
/
/
/
/
20
20
20
20
20
Type
5
AT 20
AT
AT
AT
AT
AT
Number
of teeth
3
50º
/ Length*
3
5
4
20
Type
CONTI® SYNCHROFLEX
AT 20 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
147,0
144,2
141,7
139,3
137,0
46,80
45,90
45,10
44,30
43,60
0,000
0,962
1,889
2,790
3,650
2000
2200
2400
2600
2800
66,7
63,6
60,7
58,0
55,5
21,20
20,20
19,31
18,45
17,65
44,500
46,600
48,500
50,200
51,800
100
200
300
400
500
134,9
125,8
118,5
112,4
107,2
42,90
40,00
37,70
35,80
34,10
4,500
8,390
11,850
14,990
17,860
3000
3200
3400
3600
3800
53,1
50,9
48,8
46,8
45,0
16,90
16,20
15,53
14,91
14,31
53,100
54,300
55,300
56,200
56,900
600
700
800
900
1000
102,6
98,5
94,8
91,5
88,4
32,70
31,40
30,20
29,10
28,10
20,500
23,000
25,300
27,400
29,500
4000
4500
5000
5500
6000
43,2
39,0
35,3
32,0
28,9
13,74
12,43
11,25
10,17
9,19
57,600
58,600
58,800
60,600
61,700
1100
1200
1300
1400
1500
85,6
82,9
80,5
78,2
76,0
27,20
26,40
25,60
24,90
24,20
31,400
33,200
34,900
36,500
38,000
6500
26,0
8,28
62,400
1600
1700
1800
1900
73,9
72,0
70,1
68,4
23,50
22,90
22,30
21,80
39,400
40,800
42,100
43,300
Belt width
b
[mm]
32
50
75
100
150
[N]
6750
11250
17550
23850
36450
Belt weight
[kg/m]
0,339
0,530
0,795
1,060
1,590
AT 20
Timing pulley
running on teeth
Timing pulley
zmin
dmin
18
[mm]
zmin
dmin
120
zmin
dmin
25
[mm]
180
zmin
dmin
51
T standard Timing Belts
20
50º
5
3
5
4
20
40º
T2
AT 20
0,7
0,6
Standard T profile with metric pitch and
trapezoidal2,5
teeth.
and 40º
standard steel cord tension members.
/
/
/
/
/
T
T
T
T
T
2
2
2
2
2
T
T
T
T
T
2
2
2
2
2
68
20
90
108
118
40º
120
/ 120
/ 138
T 20-DL
/ 140
/ 144
/ 150
/
/
/
/
/
34
45
54
59
60
fA
60
69
70
72
75
160
2,032
180
200
220
40º
220 fA
80
90
100
110
110
Type
/ Length*
T
T
T
T
T
2
2
2
2
2
/
/
/
/
/
220
240
256
262
280
T
T
T
T
T
2
2
2
2
2
/
/
/
/
/
292
320
360
600
710
5
2
2
2
2
2
3
T
T
T
T
T
Number
of teeth
T2
T2
0,51
T2
CONTI® SYNCHROFLEX Timing Belt (SFX) T 2
/ Length*
5
40º
Type
0,64
0,5
2
0,6
T 20
4, 6, 10
Available
versions:
T 2,5
• single-sided
M
de
u
e
0,7
0,6
2,5
FA: with
40º bigger back thickness
0,7
F,...
1,2
1
0,5
0,45
T 2,5-DL
1
70º
40º
T5
40º
1,5
6 T2 / 240
70º
1,2
Belt width in mm
Type / Pitch
T 5-DL
Belt length in mm
K 1,5
2,5
10
2
52
0,6
0,6
1,2
1
K1
5
Order example
110
120
128
131
140
146
160
180
300
355
fA
fA
355
648
5
/ 710
/ 1296
fN2
Number
of teeth
CONTI® SYNCHROFLEX
T 2 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
6,58
6,36
6,18
6,03
5,90
0,209
0,202
0,197
0,192
0,188
0,000
0,004
0,008
0,012
0,016
2400
2500
2600
2800
2880
3,42
3,39
3,35
3,29
3,26
0,109
0,108
0,107
0,105
0,104
0,274
0,282
0,290
0,307
0,313
100
150
200
300
400
5,79
5,56
5,38
5,10
4,89
0,184
0,177
0,171
0,162
0,156
0,019
0,028
0,036
0,051
0,065
3000
3200
3400
3600
3800
3,23
3,17
3,12
3,07
3,02
0,103
0,101
0,099
0,098
0,096
0,323
0,338
0,354
0,368
0,383
500
600
700
730
800
4,72
4,58
4,45
4,42
4,35
0,150
0,146
0,142
0,141
0,138
0,079
0,092
0,104
0,108
0,116
4000
4500
5000
5500
6000
2,98
2,88
2,78
2,70
2,63
0,095
0,092
0,088
0,086
0,084
0,397
0,432
0,463
0,495
0,526
900
1000
1100
1200
1300
4,25
4,16
4,08
4,01
3,94
0,135
0,132
0,130
0,128
0,125
0,127
0,139
0,150
0,160
0,171
6500
7000
7500
8000
8500
2,56
2,49
2,43
2,37
2,32
0,081
0,079
0,077
0,075
0,074
0,555
0,581
0,607
0,632
0,657
1400
1460
1500
1600
1700
3,88
3,85
3,82
3,77
3,72
0,124
0,123
0,122
0,120
0,118
0,181
0,187
0,191
0,201
0,211
9000
9500
10000
12000
15000
2,27
2,22
2,18
2,02
1,82
0,072
0,071
0,069
0,064
0,058
0,681
0,703
0,727
0,808
0,910
1800
1900
2000
2200
3,67
3,62
3,58
3,50
0,117
0,115
0,114
0,111
0,220
0,229
0,239
0,257
18000
20000
1,66
1,57
0,053
0,050
0,996
1,047
[mm]
4
6
10
16
25
32
[N]
39
65
117
195
312
403
Belt weight
[kg/m]
0,004
0,007
0,011
0,018
0,028
0,035
Belt width
b
T2
Timing pulley
running on teeth
Timing pulley
zmin
dmin
10
[mm]
dmin
18
zmin
dmin
15
zmin
[mm]
15
zmin
dmin
53
AT 20
T 20
0,5
0,5
20
33
55
2
0,6
0,6
40º
40º
55
T 2,5 / T 2,5-DL
T2
T 2,5
0,7
0,7
0,7
0,7
40º
®
T 2,5-DL
SYNCHROFLEX Timing Belt (SFX) T 2,5-DL
CONTI
1,2
1,2
11
5
Standard T profile according to DIN 7721
with metric pitch and trapezoidal teeth.
40º
T5
Available versions:
2,5
2,5
2,5
2,5
2,5
/
/
/
/
/
T
T
T
T
T
2,5 /
2,5 M/
2,5 /
2,5 /
2,5 /
T
T
T
T
T
T
2,5 / 210
2,5 / 210
2,5 / 220
2,5 / 225
2,5 / 230
F,...
2,5 / 230
T
T
T
T
T
2,5
2,5
2,5
2,5
2,5
T
T
T
T
T
2,5 / 290
2,5 / 305
2,5 / 305
2,5 / 305
K1
2,5 / 317,5
/
/
/
/
/
Type
/ Length*
T
T
T
T
T
2,5
2,5
2,5
2,5
2,5
/ 317,5
/ 330
/ 380
/ 395
/ 400
Dl
Dl
160 fA
177,5
180
182,5
200
64
71
72
73
80
T
T
T
T
T
2,5
2,5
2,5
2,5
2,5
/ 415
/ 420
/ 420
/ 457,5
/ 480
fA
84
84
88
90
92
92
T
T
T
T
T
T
2,5
2,5
2,5
2,5
2,5
2,5
/
/
/
/
/
/
500
500
540
540
600
620
fA
98
100
106
114
114
T
T
T
T
T
2,5
2,5
2,5
2,5
2,5
/
/
/
/
/
650
650
780
780
950
T
T
T
T
2,5
2,5
2,5
2,5
/
/
/
/
1300
1300
1350
1475
245
250
1
265
285
285
70º
fA
fN28
fN3
fA
fN1
0,51
0,51
22
30
48
58
64
0,64
0,64
55 2,032
fA
75 fN2
120
145
40º
160
116
122
122
122
127
4, 6, 10
1,2
1,2
• single-sided (as standard)
5
• with Aramide
tension member
11
T
T
T
T
T
Number
of teeth
1,5
40º
70º
1,2
1,2
DL: double-sided
FA:
with bigger back thickness
T 5-DL
T 5-DL
K 1,5
2,5
2,5
10 T2,5 / 380
40º
Belt width in mm
T 10Type / Pitch
k
Belt length in mm
54
22
10
2,5
2,5
V
hhzz
40º ® SYNCHROFLEX Timing Belt
CONTI
t
ee
10
Order example
22
fA
Number
of teeth
127
132
152
158
160
166
168
fN168 168
Dl
183
192
fA
fA
fA
fN2
fA
fA
fA
fA
200
200
216
216
240
248
260
260
312
312
380
520
520
540
590
0,6
0,6
0,6
0,6
2,5
0,6
0,6
CONTI® SYNCHROFLEX Timing Belt (SFX) T 2,5
/ Length*
ddee
uu
ee
40º
Type
0,5
0,5
0,45
0,45
0,7
0,7
2,5
0,6
0,6
T 20-DL
CONTI® SYNCHROFLEX
T 2,5 / T 2,5-DL Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
9,03
8,72
8,48
8,28
8,10
0,359
0,347
0,337
0,329
0,322
0,000
0,007
0,014
0,021
0,027
2500
2600
2800
2880
3000
4,65
4,60
4,51
4,48
4,43
0,185
0,183
0,180
0,178
0,176
0,484
0,499
0,527
0,538
0,554
100
150
200
300
400
7,95
7,64
7,39
7,01
6,71
0,316
0,304
0,294
0,279
0,267
0,033
0,048
0,062
0,088
0,112
3200
3400
3600
3800
4000
4,36
4,28
4,22
4,15
4,09
0,173
0,170
0,168
0,165
0,163
0,581
0,607
0,632
0,657
0,682
500
600
700
730
800
6,48
6,28
6,11
6,07
5,97
0,258
0,250
0,243
0,241
0,237
0,135
0,157
0,178
0,185
0,199
4500
5000
5500
6000
6500
3,95
3,82
3,71
3,60
3,51
0,157
0,152
0,148
0,143
0,140
0,740
0,796
0,850
0,901
0,950
900
1000
1100
1200
1300
5,83
5,71
5,61
5,51
5,41
0,232
0,227
0,223
0,219
0,215
0,219
0,238
0,257
0,275
0,293
7000
7500
8000
8500
9000
3,42
3,33
3,26
3,18
3,11
0,136
0,133
0,130
0,127
0,124
0,997
1,042
1,086
1,128
1,168
1400
1460
1500
1600
1700
5,33
5,28
5,25
5,17
5,10
0,212
0,210
0,209
0,206
0,203
0,311
0,321
0,328
0,345
0,361
9500
10000
12000
15000
18000
3,05
2,99
2,77
2,50
2,28
0,121
0,119
0,110
0,099
0,091
1,207
1,245
1,384
1,561
1,708
1800
1900
2000
2200
2400
5,04
4,97
4,91
4,80
4,70
0,200
0,198
0,195
0,191
0,187
0,378
0,394
0,409
0,440
0,470
20000
2,15
0,086
1,791
Belt width
b
[mm]
4
6
10
16
25
32
[N]
39
65
117
195
312
403
Belt weight
T 2,5
[kg/m]
0,006
0,009
0,015
0,024
0,038
0,048
T 2,5-Dl
[kg/m]
0,006
0,009
0,016
0,025
0,040
0,051
Timing pulley
running on teeth
Timing pulley
zmin
dmin
10
[mm]
dmin
18
zmin
dmin
15
zmin
[mm]
15
zmin
dmin
55
Polyurethane
Timing Belts
T 2,5
T 2,5
M
ddee
uu
ee
T 5 / T 5-DL
0,7
0,7
F,...
/ Length*
T
T
T
T
T
5
5
5
5
5
1
/ 100
/ 150
/ 150 Dl
/ 70º165
/ 165 fN33
T
T
T
T
T
5
5
5
5
5
/
/
K/1
/
/
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
T 5-DL®
CONTI SYNCHROFLEX Timing Belt (SFX) T 5-DL
T
T
T
T
T
5
5
5
5
5
/ 70º255
/ 260
/ 260 Dl
/ 260 fN1
/ 270
10
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
T
T
T
T
T
5
5
5
5
5
T
T
T
T
T
11
1,2
1,2
5
22
2,5
2,5
1,2
1,2
40º
The technical
40º
T 10
Available versions:
2,5
2,5
22
10
40º
2,5
2,5
DL: double-sided
T
10-DL
FN:
with profiles on the back of the belt
Order example
CONTI SYNCHROFLEX Timing Belt
®
Belt width in mm
Type / Pitch
Belt length in mm
10 T5 / 455
Number
5
5
5
5
5
/
/
/
/
/
590 Dl
600 fN
610
615 fN
620
118
120
122
123
124
36
37
40
42
43
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
620 Dl
625 Dl
630
630 fA
650
124
125
126
126
130
220
225
1,5 fN90
225
245
250
44
45
45
49
50
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
650 fA
660
660 fN30
690
690 fA
130
132
132
138
138
51
52
52
52
54
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
690 fN3
700
720
725
750
138
140
144
145
150
280
295
300 Dl
305
330
56
59
60
61
66
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
750 Dl
765
780
800
800 fN2
150
153
156
160
160
/
/
/
/
/
330 Dlt
340
340 fN6
355
365
40º
66
68
68
71
73
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
815
815 Dl
840
840 fN
860 fN1
163
163
168
168
172
5
5
5
5
5
/
/
/
/
V
/
390
k fN1
390
400
410
410 Dl
78
78
80
82
82
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
860 Dl
900
920
925
925 fN1
172
180
184
185
185
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
84
91
92
92
92
T
T
T
T
T
5
5
5
5
5
/ 940
/ 940 Dl
/ 990
/ 990 fN4
/ 1075
188
188
198
198
215
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
420
455
460
460 fN4
t
460 Dl
k2
480
500 40º
500 fN10
505
40º
510
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
1075
1100
1100
1100
1140
215
220
220
220
228
T
T
T
T
T
5
5
5
5
5
T
T
T
T
T
5
5
5
5
5
/
/
/
/
/
1160
1215
1215 fN
1315
1325 Dl
232
243
243
263
265
T
T
T
T
T
5
5
5
5
5
T
T
T
T
5
5
5
5
/
/
/
/
1350 fN1
1380
1380 fN1
1500
270
276
276
300
K 1,5
/ 510
1
/ k515
/ 525
/ 525
/ 525
V-DL
/
/
/
/
/
545
550
560
575
590
fN1
Dl
fA
Dl
96
100
100
101
102
102
103
105
105
105
109
110
112
115
118
6, 10, 16, 25, 50
56
T
T
T
T
T
hhzz
/ Length*
hhz2
z2
T5
Type
180
185
200
210
215
0,6
0,6
0,6
0,6
40º
20
30
30
33
33
ee
11
1,2
1,2
5
Number
of teeth
0,5
0,5
0,45
0,45
Type
ee
T 2,5-DL
hhz1
z1
40º
0,7
0,7
2,5
0,6
0,6
fA
Dl
fN22
fN1
CONTI® SYNCHROFLEX
T 5 / T 5-DL Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
24,00
23,40
22,90
22,40
22,00
1,910
1,861
1,819
1,783
1,751
0,000
0,039
0,076
0,112
0,147
2000
2200
2400
2600
2800
13,69
13,38
13,10
12,84
12,59
1,089
1,065
1,042
1,021
1,002
2,28
2,45
2,62
2,78
2,94
100
200
300
400
500
21,70
20,30
19,30
18,55
17,93
1,723
1,614
1,536
1,476
1,427
0,180
0,338
0,483
0,618
0,747
3000
3200
3400
3600
3800
12,37
12,16
11,96
11,77
11,59
0,984
0,967
0,951
0,936
0,922
3,09
3,24
3,39
3,53
3,67
600
700
800
900
1000
17,41
16,96
16,56
16,20
15,88
1,385
1,349
1,318
1,289
1,263
0,870
0,989
1,104
1,215
1,323
4000
4500
5000
5500
6000
11,42
11,03
10,68
10,36
10,07
0,909
0,878
0,850
0,825
0,802
3,81
4,14
4,45
4,75
5,04
1100
1200
1300
1400
1500
15,58
15,31
15,06
14,83
14,61
1,240
1,218
1,198
1,180
1,162
1,428
1,531
1,632
1,730
1,826
6500
7000
7500
8000
8500
9,81
9,56
9,33
9,11
8,91
0,780
0,761
0,742
0,725
0,709
5,31
5,58
5,83
6,08
6,31
1600
1700
1800
1900
14,40
14,21
14,03
13,85
1,146
1,131
1,116
1,102
1,920
2,010
2,100
2,190
9000
9500
10000
8,72
8,54
8,37
0,694
0,679
0,666
6,54
6,76
6,97
Belt width
b
[mm]
6
10
16
25
32
50
75
100
[N]
180
330
570
930
1200
1920
2940
3930
Belt weight
T5
[kg/m]
0,014
0,024
0,038
0,060
0,077
0,120
0,180
0,240
T 5-Dl
[kg/m]
0,016
0,027
0,043
0,067
0,086
0,135
0,203
0,270
Timing pulley
running on teeth
Timing pulley
zmin
dmin
10
[mm]
dmin
15
zmin
dmin
30
zmin
[mm]
30
zmin
dmin
57
T5
T5
K1
K1
1,5
1,5
40º
40º
1,21,2
70º
70º
T 10 / T 10-DL
22
10
10
2,52,5
T 10-DL
2,52,5
40º
40º
®
CONTI
T 10-DLSYNCHROFLEX Timing Belt T (SFX) 10-DL
Available version
DL: double-sided
Order example
16 T10 / 260
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
T
T
T
T
T
10 /
10 /
10 /
10 V/
10 V/
T
T
T
T
T
10
10
10
10
10
T
T
T
T
T
10
10
10
10
10
T
T
T
T
T
10
10
10
10
10
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
720 Dl
730
750
760
780
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
T
T
T
T
T
10
10
10
10
10
T 10
T 10
T 10
Number
of teeth
Type
/ Length*
Number
of teeth
T
T
T
T
T
10
10
10
10
10
/ 980
/ 980 Dl
/ 1010
/ 1080
/ 1110
98
98
101
108
111
410
410
k fA
k fN21
420
440
450
41
41
42
44
45
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
1140
1150
1210
1210 Dl
1240
114
115
121
121
124
50
50
53
53
56
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
1240 Dl
1250
1250 Dl
1300
1320
124
125
125
130
132
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
1320 Dl
1350
1350 Dl
1390
1400
132
135
135
139
140
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
1420
1420 Dl
1450
1460
1460 fN146
142
142
145
146
146
72
73
75
76
78
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
1500
1560
1610
1610 Dl
1750
150
156
161
161
175
780 fN78
800 fN80
810
840
840 Dl
78
80
81
84
84
T
T
T
T
T
10
10
10
10
10
/
/
/
/
/
1780
1800 fN12
1880
1880 Dl
1960
178
180
188
188
196
/
/
/
/
/
840 fN84
850
880
890
920
84
85
88
89
92
T
T
T
T
10
10
10
10
/
/
/
/
2250
3100
4780
4780 Dl**
225
310
478
478
/
/
/
960
970
970 fN97
96
97
97
40º
/
/
/
/
/
500
500 fN
530
t
530 Dlt
560 k 2
k2
/ 600 40º
/ 610 40º
/ 630
40º
/ 40º
630 Dl
/ 660
k1
/ k660
Dl
1
/ 680
/ 690
V-DL
/ 700
V-DL
/ 720
60
61
63
63
66
66
68
69
70
72
16, 25, 32, 50
h zh z
26
26
35
37
40
e e
260
260 Dlt
t
350
370
400
40º
h z2h z2
T 10
T 10
/ Length*
e e
40º
40º
Type
h z1h z1
10
10
2,52,5
K 1,5
K 1,5
22
T 5-DL
T 5-DL
0,60,6
0,60,6
11
5
5
1,21,2
Belt width in mm
Type / Pitch
Belt length in mm
58
CONTI® SYNCHROFLEX
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
50,5
49,0
47,7
46,6
45,7
8,04
7,80
7,60
7,42
7,27
0,000
0,163
0,318
0,466
0,609
2000
2200
2400
2600
2800
25,40
24,60
23,90
23,30
22,70
4,04
3,92
3,81
3,71
3,62
8,46
9,03
9,58
10,10
10,60
100
200
300
400
500
44,8
41,4
39,1
37,2
35,7
7,13
6,60
6,22
5,92
5,68
0,746
1,381
1,953
2,480
2,980
3000
3200
3400
3600
3800
22,20
21,70
21,20
20,70
20,30
3,53
3,45
3,36
3,30
3,23
11,08
11,55
11,99
12,42
12,84
600
700
800
900
1000
34,4
33,3
32,4
31,5
30,7
5,48
5,31
5,15
5,01
4,89
3,440
3,890
4,320
4,730
5,120
4000
4500
5000
5500
6000
19,86
18,91
18,06
17,28
16,58
3,16
3,01
2,87
2,75
2,64
13,24
14,18
15,05
15,84
16,58
1100
1200
1300
1400
1500
30,0
29,3
28,7
28,2
27,6
4,77
4,67
4,57
4,48
4,40
5,500
5,870
6,220
6,570
6,910
6500
7000
7500
8000
8500
15,93
15,33
14,76
14,24
13,74
2,54
2,44
2,35
2,27
2,18
17,26
17,88
18,46
18,99
19,47
1600
1700
1800
1900
27,1
26,7
26,2
25,8
4,32
4,24
4,17
4,10
7,230
7,550
7,860
8,160
9000
9500
10000
13,28
12,84
12,42
2,11
2,04
1,97
19,92
20,30
20,70
[mm]
16
25
32
50
75
100
150
[N]
1200
2000
2700
4300
6600
8800
13400
Belt weight
T 10
[kg/m]
0,077
0,120
0,154
0,240
0,360
0,480
0,720
T 10-Dl
[kg/m]
0,091
0,143
0,182
0,285
0,428
0,570
0,855
Belt width
b
Timing pulley
running on teeth
Timing pulley
zmin
dmin
12
[mm]
dmin
20
zmin
dmin
60
zmin
[mm]
60
zmin
dmin
59
55
20
20
33
T 20 / T 20-DL
40º
40º
T 20
T 20
55
20
20
33
55
40º
40º
T 20-DL
®
SYNCHROFLEX Timing Belt (SFX) T 20-DL
CONTI
T
20-DL
0,51
0,51
0,64
0,64
Standard2,032
T profile according to DIN 7721
2,032
with metric
pitch and trapezoidal teeth.
The technical
40º
and 40º
standard steel cord tension members.
Available versions:
M
M
• with Aramide tension member (except DL)
dd
ee
uu
ee
DL: double-sided
1
1
Order example
0,5
0,5
0,45
0,45
F,...
F,...
70º
70º
Belt width in mm
K 1Type / Pitch
K1
1,5
1,5
60
0,6
0,6
0,6
0,6
Belt length in mm
50 T20 / 2600
Type
/ Length*
T
T
T
T
T
/
/
/
/
/
20
20
20
20
20
1260
1460
1780
1880
2600
Number
of teeth
63
73
89
94
130
32, 50, 75, 100
Type
/ Length*
T
T
T
T
/
/
/
/
20
20
20
20
2600 Dl**
3100
3620
3620 Dl**
Number
of teeth
130
155
181
181
CONTI® SYNCHROFLEX
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
101,5
98,1
95,3
92,8
90,7
32,30
31,20
30,30
29,50
28,90
0,000
0,654
1,271
1,856
2,420
2000
2200
2400
2600
2800
45,3
43,6
42,1
40,7
39,4
14,42
13,89
13,40
12,95
12,53
30,2
32,0
33,7
35,2
36,7
100
200
300
400
500
88,7
81,2
75,9
71,8
68,4
28,20
25,90
24,20
22,90
21,80
2,960
5,420
7,590
9,570
11,410
3000
3200
3400
3600
3800
38,1
37,0
35,9
34,9
33,9
12,13
11,77
11,42
11,09
10,78
38,1
39,4
40,7
41,8
42,9
600
700
800
900
1000
65,6
63,1
60,9
59,0
57,2
20,90
20,10
19,40
18,78
18,22
13,110
14,730
16,250
17,700
19,080
4000
4500
5000
5500
6000
33,0
30,8
28,9
27,2
25,6
10,49
9,81
9,21
8,66
8,16
43,9
46,2
48,2
49,9
51,2
1100
1200
1300
1400
1500
55,6
54,2
52,8
51,5
50,3
17,71
17,24
16,80
16,40
16,02
20,400
21,700
22,900
24,000
25,200
6500
24,2
7,69
52,4
1600
1700
1800
1900
49,2
48,2
47,2
46,2
15,66
15,33
15,01
14,71
26,200
27,300
28,300
29,300
Belt width
b
[mm]
32
50
75
100
150
[N]
4750
7750
12000
16000
24500
Belt weight
T 20
[kg/m]
0,269
0,420
0,630
0,840
1,260
T 20-Dl
[kg/m]
0,355
0,555
0,833
1,110
1,665
Timing pulley
running on teeth
Timing pulley
zmin
dmin
15
[mm]
dmin
25
zmin
dmin
120
zmin
[mm]
120
zmin
dmin
61
5
3
20
Imperial Timing Belts
40º
M (MXL)
5
T 20-DL
0,51
2,032
0,64
Type
40º
M
CONTI® SYNCHROFLEX Timing Belt (SFX) M (MXL)
de
u
e
Standard trapezoidal teeth according
to DIN/ISO 5296 with Minipitch
(2.032 mm = 0.08 Inch).
F,...
70º
• polyurethane
special materials upon request
K1
0,6
0,6
1,5
70º
K 1,5
hz
e
Order example
t
40º
Belt width in mm
Type / Pitch
k
Belt length in mm
V
62
t
Number
of teeth
6 M / 182
Type
/ Length*
Number
of teeth
M
M
M
M
M
111 /
113 /
121 /
121 /
132 /
111,76
113,79
121,92
121,92 fA
132,08
55
56
60
60
65
M
M
M
M
M
264 /
284 /
304 /
355 /
373 /
264,16
284,48
304,80
355,60
373,89
130
140
150
175
184
M
M
M
M
M
142 /
144 /
162 /
182 /
197 /
142,24
144,27
162,56
182,88
197,10
70
71
80
90
97
M
M
M
M
M
449 /
503 /
508 /
520 /
599 /
449,07
503,94
508,00 fN
520,19
599,44
221
248
250
256
295
M
M
M
M
M
203 /
209 /
213 /
243 /
256 /
203,20
209,30
213,36
243,86
256,03
100
103
105
120
126
4, 6, 10
0,5
0,45
Available versions:
1
• single-sided
/ Length*
M 731 / 731,52
M1178 / 1178,56
360
580
CONTI® SYNCHROFLEX
M (MXL) Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
6,58
6,36
6,18
6,03
5,90
0,209
0,202
0,197
0,192
0,188
0,000
0,004
0,008
0,012
0,016
2500
2600
2800
2880
3000
3,39
3,35
3,29
3,26
3,23
0,108
0,107
0,105
0,104
0,103
0,282
0,290
0,307
0,313
0,323
100
150
200
300
400
5,79
5,56
5,38
5,10
4,89
0,184
0,177
0,171
0,162
0,156
0,019
0,028
0,036
0,051
0,065
3200
3400
3600
3800
4000
3,17
3,12
3,07
3,02
2,98
0,101
0,099
0,098
0,096
0,095
0,338
0,354
0,368
0,383
0,397
500
600
700
730
800
4,72
4,58
4,45
4,42
4,35
0,150
0,146
0,142
0,141
0,138
0,079
0,092
0,104
0,108
0,116
4500
5000
5500
6000
6500
2,88
2,78
2,70
2,63
2,56
0,092
0,088
0,086
0,084
0,081
0,432
0,463
0,495
0,526
0,555
900
1000
1100
1200
1300
4,25
4,16
4,08
4,01
3,94
0,135
0,132
0,130
0,128
0,125
0,127
0,139
0,150
0,160
0,171
7000
7500
8000
8500
9000
2,49
2,43
2,37
2,32
2,27
0,079
0,077
0,075
0,074
0,072
0,581
0,607
0,632
0,657
0,681
1400
1460
1500
1600
1700
3,88
3,85
3,82
3,77
3,72
0,124
0,123
0,122
0,120
0,118
0,181
0,187
0,191
0,201
0,211
9500
10000
12000
15000
18000
2,22
2,18
2,02
1,82
1,66
0,071
0,069
0,064
0,058
0,053
0,703
0,727
0,808
0,910
0,996
1800
1900
2000
2200
2400
3,67
3,62
3,58
3,50
3,42
0,117
0,115
0,114
0,111
0,109
0,220
0,229
0,239
0,257
0,274
20000
1,57
0,050
1,047
Belt width
b
[mm]
4
6
10
16
25
32
[N]
39
65
117
195
312
403
Belt weight
[kg/m]
0,005
0,007
0,012
0,019
0,030
0,038
M
Timing pulley
running on teeth
Timing pulley
zmin
dmin
10
[mm]
dmin
18
zmin
dmin
15
zmin
[mm]
15
zmin
dmin
63
Polyurethane
M Timing Belts
M
de de
u u
e e
Serrated Profile Timing Belts
K 1 / K 1,5
F,...
F,...
0,5 0,5
0,450,45
1
1
70º
70º
K1
K
1 ® SYNCHROFLEX Timing Belt (SFX) K 1
CONTI
0,6 0,6
0,6 0,6
1,5
1,5
70º
70º
/ Length*
K1
K1
/ 279,0
/ 348,0
K
K
K
K
K
1,5
1,5
1,5
1,5
1,5
/ 57,0 **
/ 64,5 **
/ 67,5 **
/ 100,5
/ 141,0
K
K
K
K
K
1,5
1,5
1,5
1,5
1,5
/
/
/
/
/
165,0
201,0
228,0
286,0
300,0
Number
of teeth
279
348
38
43
45
67
94
K 1,5
Serrated metric pitch profile.
t
hz hz
e
e
t data refer to standard polyurethane
The technical
40º
40º
Available versions:
k
• single-sided
k
V
V
e
k
2
40º
e
kt2
h z2 h z2
t
40º
40º
k1
k1
Order example
h z1 h z1
40º
V-DL
V-DL
CONTI® SYNCHROFLEX Timing Belt 6 K1,5 / 100,5
Belt width in mm
Type / Pitch
Belt length in mm
Type
/ Length*
K
K
K
K
K
/ 400,5
/ 501,0
/ 600,0
/ 1242,5
/ 1671,5
1,5
1,5
1,5
1,5
1,5
Number
of teeth
267
334
400
828
1114
110
134
152
191
200
4, 6, 10
K
1,5
CONTI® SYNCHROFLEX Timing Belt (SFX) K 1,5
64
Type
** In casting polyurethane 93 ShA,
red colour.
CONTI® SYNCHROFLEX
K / K1,5 Technical data
R.p.m.
FUspec
Mspec
Pspec
R.p.m.
FUspec
Mspec
Pspec
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
n [min-1]
[N/cm]
[Ncm/cm]
[W/cm]
0
20
40
60
80
6,45
6,23
6,06
5,91
5,79
0,154
0,149
0,145
0,141
0,138
0,000
0,003
0,006
0,009
0,012
2500
2600
2800
2880
3000
3,32
3,29
3,22
3,20
3,17
0,079
0,079
0,077
0,076
0,076
0,207
0,214
0,225
0,230
0,238
100
150
200
300
400
5,68
5,46
5,28
5,00
4,80
0,136
0,130
0,126
0,119
0,115
0,014
0,020
0,026
0,037
0,048
3200
3400
3600
3800
4000
3,11
3,06
3,01
2,96
2,92
0,074
0,073
0,072
0,071
0,070
0,249
0,260
0,271
0,281
0,292
500
600
700
730
800
4,63
4,49
4,37
4,33
4,26
0,111
0,107
0,104
0,103
0,102
0,058
0,067
0,076
0,079
0,085
4500
5000
5500
6000
6500
2,82
2,73
2,65
2,57
2,51
0,067
0,065
0,063
0,061
0,060
0,317
0,341
0,364
0,385
0,408
900
1000
1100
1200
1300
4,17
4,08
4,00
3,93
3,87
0,100
0,097
0,095
0,094
0,092
0,094
0,102
0,110
0,118
0,126
7000
7500
8000
8500
9000
2,44
2,38
2,33
2,27
2,22
0,058
0,057
0,056
0,054
0,053
0,427
0,446
0,466
0,482
0,499
1400
1460
1500
1600
1700
3,81
3,77
3,75
3,69
3,64
0,091
0,090
0,090
0,088
0,087
0,133
0,138
0,141
0,148
0,155
9500
10000
12000
15000
18000
2,18
2,13
1,98
1,78
1,63
0,052
0,051
0,047
0,042
0,039
0,518
0,532
0,594
0,667
0,733
1800
1900
2000
2200
2400
3,60
3,55
3,51
3,43
3,35
0,086
0,085
0,084
0,082
0,080
0,162
0,169
0,175
0,189
0,201
20000
1,54
0,037
0,770
[mm]
4
6
10
16
25
32
[N]
39
65
117
195
312
403
Belt weight
K1
[kg/m]
0,0044
0,007
0,011
0,018
0,028
0,035
K 1,5
[kg/m]
0,004
0,006
0,010
0,016
0,025
0,032
Belt width
b
Timing pulley
running on teeth
Timing pulley
14
zmin
dmin
[mm]
dmin
20
zmin
dmin
15
zmin
[mm]
15
zmin
dmin
65
5
3
20
40º
5
f flat Belts
T 20-DL
0,51
2,032
0,64
F / AF / BF / CF / DF
Type
Mould
Nr.
Length
[mm]
e
[mm]
u
[mm]
de
[mm]
F
F
F
F
F
213/7
254/4
314/5
315/4
330/2
K3969-Z
K5111-Z
K5558-Z
K5428-Z
K5651-Z
212,95
253,74
314,16
315,73
330,00
1,60
0,80
5,50
1,20
1,00
0,800
0,400
2,000
0,600
0,400
0,15
0,15
0,60
0,15
0,15
F
F
F
F
435/2
502/7
697/4
738/4
K5691-Z
K5430-Z
52648-Z
K5112-Z
435,00
501,84
695,57
738,64
0,80
1,00
0,55
0,80
0,400
0,500
0,275
0,400
0,15
0,30
0,15
0,15
F
F
F
F
F
762/7
959/2
1240/10
1458/9
1780/10
K3708-Z
K5578-Z
K5178-Z
K4377-Z
K4667-Z
762,00
959,40
1240,00
1458,50
1780,00
2,60
1,00
1,20
2,60
1,40
1,300
0,500
0,800
0,450
0,600
0,30
0,30
0,60
0,30
0,60
40º
de
u
e
M
F,...
CONTI® SYNCHROFLEX Flat Belt (SFX)
0,5
0,45
1
70º
K1
0,6
0,6
1,5
70º
K 1,5
hz
e
t
40º example
Order
k
CONTI® SYNCHROFLEX Flat Belt
V
Belt width in mm
Type / No. of grooves
e
k2
66
40º
h z2
t
10 AF/ 108
AF
AF
AF
AF
AF
24
56
67
76
87
51669-Z
51772-Z
51601-Z
39669-Z
38919-Z
113,08
263,16
315,70
357,30
409,57
0,80
0,80
0,70
0,80
0,85
0,275
0,400
0,275
0,400
0,575
0,15
0,15
0,15
0,15
0,15
AF
AF
AF
AF
108
138
140
148
39796-Z
39847-Z
40121-Z
39631-Z
508,39
649,60
659,03
695,57
0,70
0,80
0,60
0,80
0,275
0,275
0,275
0,275
0,15
0,15
0,15
0,15
BF
BF
BF
BF
44
64
67
70
38852-Z
38805-Z
38902-Z
39980-Z
345,57
501,85
525,70
548,90
0,90
0,90
0,90
0,90
0,450
0,450
0,450
0,450
0,30
0,30
0,30
0,30
CF 66
38917-Z
828,55
1,40
0,700
0,60
DF 45
DF 130
DF 153
39839-Z
51636-Z
39979-Z
282,74
815,34
959,40
0,90
0,90
0,90
0,450
0,450
0,450
0,30
0,30
0,30
CONTI® SYNCHROFLEX
Timing Belts with special tooth profiles
V (excerpts of XL, L, H)
Type
Imperial Shape No.
pitch
Length
l [mm]
Pitch
t [mm]
Module
m
Number of
k [mm]
teeth z
hz [mm]
e [mm]
V
V
V
V
V
177/5
203/5
233/5
284/5
304/5
f
f
f
f
f
xl
xl
xl
xl
xl
K5841-f
K5369-f
K5674-f
K5445-f
K5368-f
177,80
203,20
233,68
284,48
304,80
5,080
5,080
5,080
5,080
5,080
1,617
1,617
1,617
1,617
1,617
35
40
46
56
60
1,20
1,37
1,37
1,80
1,37
1,20
1,27
1,22
1,20
1,27
0,85
0,80
1,28
0,70
0,60
V
V
V
V
V
381/5
406/5
508/5
609/5
635/5
f
f
f
f
f
xl
xl
xl
xl
xl
K6026-f
K6064-f
K6011-f
K5546-f
K5394-f
381,00
406,40
508,00
609,60
635,00
5,080
5,080
5,080
5,080
5,050
1,617
1,617
1,617
1,617
1,617
75
80
100
120
125
1,35
1,37
1,32
1,36
1,32
1,25
1,27
1,22
1,20
1,20
0,95
1,30
1,32
0,70
0,60
V
V
V
V
V
685/5
889/5
1097/5
1102/5
1178/5
f
f
f
f
f
xl
xl
xl
xl
xl
K5821-f
K5601-f
K5993-f
K5776-f
K5876-f
685,80
889,00
1097,28
1102,36
1178,56
9,538
5,050
5,080
5,080
5,080
1,617
1,617
1,617
1,617
1,617
135
175
216
217
232
1,62
1,80
1,37
1,80
1,80
1,20
1,20
1,27
1,20
1,20
0,70
1,00
1,30
1,20
1,00
V
V
V
V
V
1584/5
438/9
571/9
971/9
990/9
f
f
f
f
f
xl
l
l
l
l
K5600-f
K5095-f
K6114-f
K5354-f
K5185-f
1584,96
438,15
571,50
971,55
990,60
5,080
9,525
9,525
9,525
9,525
1,617
3,032
3,032
3,032
3,032
312
46
60
102
104
1,80
3,20
3,26
3,25
3,10
1,20
1,80
1,91
1,90
2,20
1,00
1,00
1,69
1,40
1,65
V
V
V
V
V
1000/9
1028/9
1104/9
1152/9
1257/9
f
f
f
f
f
l
l
l
l
l
K5202-f
K5589-f
K5435-f
K5493-f
K5310-f
1000,13
1028,70
1104,90
1152,53
1257,30
9,525
9,525
9,525
9,525
9,525
3,032
3,032
3,032
3,032
3,032
105
108
116
121
132
3,10
3,10
3,25
3,10
3,20
2,20
1,90
1,90
1,90
1,90
1,65
1,65
2,30
1,65
1,65
V
V
V
V
1390/9
914/12
1270/12
1778/12
f
f
f
f
l
h
h
h
K5449-f
K5692-f
K5258-f
K5260-f
1390,65
914,40
1270,00
1778,00
9,525
12,700
12,700
12,700
3,032
4,043
4,043
4,043
146
72
100
140
3,20
4,30
4,45
4,40
1,90
2,20
2,18
2,30
1,30
1,85
2,01
1,40
Order example
CONTI® SYNCHROFLEX Flat Belt
10 V 177 / 5 F
Belt width in mm
Type/ Length
67
Coated timing belts
CONTI® SYNCHROFLEX Timing Belts consist of wear
resistant polyurethane (PUR) and high tensile steel cord
tension members. The coating of the timing belts with
various materials provides a variety of application possibilities in the transport technology.
The selection of the correct coating depends on the
transport item properties and the required grip. High
friction for a good carrying effect, low friction to reduce
the power transmission performance, soft for sensitive
items or hard for sharp-edged items are the determining
factors.
68
Every material involved assumes its task according to its
specific property.
To meet specific transport applications, the tooth side
and/or the transport side can be mechanically reworked. In this manner, the flexibility of the entire belt can
be restored by making incisions in thick coatings.
CONTI® SYNCHROFLEX
Resistance
Depending on the application the resistance of each
material part of the coated timing belt is to be viewed
separately. The material resistance depends, among
others, on the ph value, the concentration, the temperature and the influencing time of the medium. Simple
oils generally have no damaging effect on the belt.
Additives in the oil and temperatures over approx. 40°C
can reduce the longevity.
Friction
The friction of the belt on a support produces heat. This
increases the more the belt is loaded by the items to be
transported. The bed support must be selected such
that the friction value of the transport belt in contact
with the material of the bed plate results in a minimum
value. The bed plate should guarantee good heat dissipation under high pressure forces.
The friction value is temperature dependent. It increases
as the temperature rises and reduces at temperatures
below zero (frost).
Information
you should ask for advice for coatings over 75 mm
wide and approx. 2 mm thick because of the different
processing properties.
Drives with contraflexure
Generally, coated timing belts are suitable for drives with
contraflexure. Very smooth coatings (e.g. Sylomer) must
be adjusted with reduced pre-tension.
Temperature influence
If hot items (above approx. 80°C) are transported,
ensure that the contact time is as short as possible to
avoid heating of the belt substructure to over 80°C. A
coated belt can resist a thermally higher load over short
distances or a short period, assuming that there being
sufficient cooling for the remainder of the revolution.
The tooth shear strength is slightly reduced in a temperature range of over approx. 60°C. An additional safety
factor is only required with a high tooth load.
The flexibility of the coating is reduced with low ambient
temperatures. To this effect, select larger timing pulley
diameters compared to normal temperatures (see diagram). The flexibility of the timing belt is also reduced
with low temperatures.
The stated minimum diameters are standard values.
They are valid with the ambient temperature of 20°C and
a speed of 1m/s. A low load of the goods to be transported is presumed. reducing the diameters is possible
with precise knowledge of the application. relevant
advice can be obtained from your Mulco partner.
Synchronising pulley diameter
depending on the temperature
500
300
Beschichtungsdicke
Coating
thickness
Diameter
Durchmesser
400
200
100
0
-20
0
20
40
60
80
Temperature
Temperatur(°C)
(°C)
69
Coated timing belts
NP 385
Material designation:
Colour:
Hardness:
Available thickness:
Minimum diameter:
Temperature resistance:
Resistances:
Properties:
Application fields:
polyurethane
transparent
85 Shore A
4 mm
120 mm
-20°C to +50°C
resistant against simple oils and fats
nub tip contact with the product to be transported
transport with oil influence, sheet transport, elevator, brick making, glass industry
FG 385
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
polyurethane
transparent
85 Shore A
4 mm
120 mm
-20°C to +50°C
linear contact of the product to be transported
transport with oil influence, sheet transport, elevator, brick making, glass industry
PUR 385
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
70
polyurethane
transparent
85 Shore A
3
4
5
6
mm
80
120
150
180 mm
-20°C to +50°C
resistant to petrol, ozone, simple fats and oils
high resistance to wear, high coefficient of friction
transport of parts showing a coarse surface or burrs, woodworking and
sheet fabricating industry, glass industry, cardboard transport
CONTI® SYNCHROFLEX
HV1 film
Colour:
Hardness:
Minimum diameter:
Melting range:
Resistances:
Properties:
Application fields:
polyurethane
transparent, shiny
88 Shore A
1 mm
60 mm
approx. 166°C
resistant to some cleaning agents
good wear resistance, adhesive
foodstuff industry, glass and woodworking industry, sheet fabricating industry,
cardboard transport
Polythane D15
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
polyurethane
transparent/yellowish
70 Shore A
2
3 to 6 mm
60 80 mm
80°C
wear resistant
general transport tasks, woodworking and glass industry, sheet fabricating industry
Compound coating
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
e.g. PUR/silicone
white
60 / 50 Shore A
2.4 mm
60 mm
in accordance with the materials used,
Silicone: short-term 180°C
in accordance with the materials used
non-stick
light weight transport tasks, air filter transport, textile and wood industry
PVC white
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
PVC
white
approx. 40 Shore A
2 mm (more thicknesses on request)
60 mm
-15C° to +90°C
top covering layer is resistant against acid, salts and bases
FDA approval for contact with foodstuff
foodstuff industry, film processing, pharmaceutical and packaging industry
71
Coated timing belts
PU yellow
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
polyurethane
yellow
approx. 55 ± 7 Shore A
2
3
4
5
6
8
10 mm
60
60
80
100
100
100
20 mm
-10°C to +60°C
good wear resistance, very good to rework
vacuum transport belts subject to high loads, paper industry,
textile industry, glass and wood industry
Porol
Colour:
Density, hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
cellular rubber
black
190 g/dm3, approx. 15 Shore A
3
5
10 mm
40
60
80 mm
-40°C to +70°C
resistance to some simple fats and oils
smooth foam quality, high coefficient of friction
transport of sensitive parts, paper industry, textile industry, cardboard transport
Celloflex
Colour:
Density:
Minimum diameter:
Resistances:
Properties:
Application fields:
microcellular elastomeric polyurethane
yellow-brown
350 g/dm3
1
2
3
4
5 mm
40
40
60
60
80 mm
-30°C to +80°C
resistance to some simple fats and oils
highly flexible, high damping ratio
transport of sensitive items, film and packaging industry, textile transport
Linatex
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
72
natural rubber
red
approx. 40 Shore A
1.5
2.4
3
5
6.4
8
10
12
20 mm
40
60
80
80
100
100
120
120 150 mm
-40°C to +70°C
resistant to some oils and abrasion when wet
wear resistant to a limited extent, high coefficient of friction,
high resistance to rupture, is still flexible at lower temperatures,
please request for advice for coating thicknesses over 2.4 mm
transport or haul-off belts subject to high friction, wood, paper,
textile industry, transport with a high acceleration
CONTI® SYNCHROFLEX
Sylomer
Colour:
Density:
Minimum diameter:
Resistances:
Properties:
Application fields:
Elastomeric PUR
Blue (R)
Green (L) Brown (M)
220
300
400
g/dm3
3-25
3-25
3-25
mm
80 - 120
80 - 120
80 - 120 mm
-30°C to +70°C
resistance to some oils and fats
good wear resistance, not suitable for sharp edged items
transport of light weight parts, paper and textile industry, haul-off belts, pressure belts
PVC blue
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
PVC
blue
approx. 40 Shore A
1 mm
30 mm
-15°C to +90°C
top covering layer is resistant against acid, salts and bases
high coefficient of friction
paper, film, wood and sheet transport, pharmaceutic and packaging industry,
application in card reading units
Chrome-leather
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
leather
grey-blue
2
3
mm
80
100 mm
60°C
good friction even with oiled surfaces of items to be transported,
good wear resistance behaviour
transport of fatty or oily parts, sheet and tube industry, transport of sensitive products,
caterpillar haul-offs in the cable industry, transport of lacquered parts
Correx
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
para rubber
brown
approx. 35 to 40 shore A
6
10
mm
80
120 mm
up to approx. 70°C
resistant to some oils and fats
wear resistant quality, good carrying behaviour
general transport tasks, sheet and tube transport, cardboard transport
73
Coated timing belts
PVC herringbone
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
PVC
white
approx. 65 Shore A
3 mm
60 mm
-10°C to +110°C
FDA approval for contact with foodstuff
foodstuff industry, elevators, transport of glass in wet areas
Viton
Colour:
Hardness:
Minimum diameter:
Resistances:
Application fields:
FKM mix
black
75 ± 5 Shore A
2
4
mm
80
100 mm
-10°C to +275°C
high heat resistance, resistant against simple oils and fats, petrol, acids, lyes, ozone
short-term transport of parts with high residual heat, belts with glue and adhesive contact,
metal part and glas transport
Linatrile
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
vulcanized material based on nitrile
orange
55 Shore A
3-6 mm (more thicknesses on request, max. 25 mm)
depending on the selected thickness, the thicker the
coating the larger the diameter must be selected
-20°C to +110°C
resistant against oil, fat and other chemicals
good wear resistance, ageing stability, fatigue resisting
haul-off belts in the textile area, transport of waxy materials
Supergrip green/blue
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
74
PVC
green
blue
approx. 40 Shore A
approx. 40 Shore A
4 mm
4 mm
60 mm
60 mm
-15°C to +90°C
-15°C to + 90°C
resistant against simple
not resistant to oil
oils and fats
high resistance to wear, high coefficient of friction
particularly suitable for inclined conveying, transport of light weight items,
elevators in the wood and paper industry
CONTI® SYNCHROFLEX
RP 400
Colour:
Hardness:
rubber
yellow
35 Shore A
2
3
4
Minimum diameter:
Resistances:
Properties:
Application fields:
30 40 40 60 60
mm
-10°C to +80°C
very high resistance against wear and tear
glass and steel industry, abrasive material up to a size of 40 mm
5
6
mm
(more thicknesses on
request, max. 30 mm)
NBR
Colour:
Hardness:
Minimum diameter:
Resistances:
Application fields:
Nitrile Butadiene Rubber
black
65 ± 5 Shore A
1,5
3 mm
60
80 mm
-20°C to +70°C
well resistant against oils, resistant to a limit extent against petrol, acid and alkalis
general transport tasks
PVC Minigrip
Colour:
Hardness:
Minimum diameter:
Resistances:
Properties:
Application fields:
PVC
green/blue
approx. 65 Shore A
1,5
mm
30
mm
-10°C to +110°C
high coefficient of friction
transport of damp parts, good carrying behaviour due to profiled surface
TT 60
Colour:
Minimum diameter:
Resistances:
Properties:
Application fields:
polyester fleece
black
2 mm
120 mm
-10°C to +120°C
resistance to oils and fats
electro-static properties
glass industry as transport belt in the hot area
75
Integrated flights
CONTI® SYNCHROFLEX Timing Belts with
cast flights/profiles:
CONTI ® SyNChrOflex Timing Belts with profiles
offer further opportunities for the designer with flights
or cleats on the belt back. Can be used in conveying,
feeding or positioning.
Assembly belt
Maximum precision is achieved by the manufacture in
one operating step using a timing belt mould. Customer
requirements with regard to the shape of the flights and
their number can be taken into consideration at the time
of producing a new mould. Best flight centre distance
tolerance achievable: +/- 0.05 mm.
Examples of flighted CONTI® SYNCHROFLEX Timing Belts from a single mould:
1
2
3
5
6
7
Application example
4
8
Applications:
Synchronising technology to achieve maximum precision
• EDP equipment
• Office machinery
• Fine mechanical technology
• Packaging machinery
• Indexing systems
• Synchronous conveyors
• Handling technology
• Transport technology
Please contact us for technical advice if you
require more detailed information on special belt
dimensions (existing timing belt moulds).
76
CONTI® SYNCHROFLEX
CONTI® SYNCHROFLEX Timing Belts
with welded flights/profiles:
All CONTI® SyNChrOflex Timing Belts as from pitch
T 2.5 can be retrofitted with flights. In line with the
customer’s drawing, the desired number of flights are
thermally butt-welded to the back of the belt. The achie-
vable weld-on tolerance of each individual flight is ± 0.5
mm. hundreds of shapes of flights are available. Please
ask for additional information. for special customer
requirements new flights can be manufactured.
Examples of possible flight shapes requiring mechanical re-work:
a
e
i
b
c
d
f
g
h
k
l
j
The various shapes of flights allow an adaptation of the
transport timing belt to the envisaged practical function.
The flight pitch is freely selectable. The flights can be
manufactured with moulded inserts. Profile attachments
can be retrofitted (positioned). The welding point itself
and the maximum bending stress are subject to special
parameters.
flig
ht
cen
tre
dis
tan
ce
Please contact us for technical advice.
Applications:
General transport technology
• Conveying/transporting
• Separation
• Positioning
• Indexing
• Feeding
Order example
25 T 10 / 1960 - FN 49
Belt width in mm
Type/ Pitch
Belt length in mm
Number of profiles
77
Brush timing belts
A solution for almost every application
To complement standard applications in power transmission, linear and transport technology, we offer the
CONTI® SyNChrOflex Brush Timing Belt for special
applications.
Construction
The timing belt is either equipped with a stronger back
with brush or - to meet the individual application - with
brush flights. The thickness of the back is between 10
and 20 mm, depending on the fibre thickness and cutting length. flight centre-distance, fibre density and type
are individual matched to each application.
2
4
2
1. Timing belts with reinforced back (the necessary
flexibility is achieved by notches in the back of the
belt).
2. Brushes/fibres
3. Standard timing belt
4. Profile
1
Versatile application
Conveying:
• Transport of sensitive parts for example: glass,
ceramics, paper
• Conveying of materials featuring delicate surfaces
• Accumulation conveying due to the extremely low
coefficient of friction
• Larger contact surface resulting from the fanned
fibre arrangement
• Reduced conveying noise
• Dirt and chips cannot accumulate on the contact
surface
• Combination with all transport flights
Product range
Brush timing belts are available in any length offered in
our product range and in the following pitches:
T 5, T 10, T 20, AT 5, AT 10, AT 20
Please contact us for more detailed information on fibre
materials, data on chemical resistances and admissible
temperature ranges.
78
Cleaning:
• Dry and wet application
• Surface treatment
3
CONTI® SYNCHROFLEX
Natural fibres and hair
(max. cutting length 30 mm)
Horsehair, soft
Horsehair mix, semi-hard
Calcutta bristles,
semi-hard
Mex. fibre, semi-hard
Arenga, hard
Coconut fibre, hard
Mypren 0.20 mm dia.
Nylon 6 Ø 0.15 to 0.5 mm
straight or corrugated
Nylon 6.6.
Ø 0.15 - 0.5 mm
Steel wire
Ø 0.15 - 0,4 mm
Brass wire
Ø 0,1 - 0,4 mm
Phosphate bronze
Ø 0,1 - 0,4 mm
Plant fibres
(cutting length 10 to 75 mm)
Artificial bristles
(any cutting length)
Wire
(any cutting length)
79
Mechanical rework
CONTI® SyNChrOflex Timing Belts can be mechanically reworked to meet special functional features.
Timing belts with a thick backing are especially suited
for mechanical rework. They offer far reaching design
possibilities for the designer.
Available types: Version FA and coatings/coverings
Please note that the flexibility of timing belts with a
thicker back is reduced and therefore, requiring larger
pulley diameters. Belt flexibility can be improved by
cross grooving or incisions.
Back cross milling
Cross grooves on the belt back enhance the flexibility of the belt. Milled grooves
are, in as much as they are possible from the technical feasibility point of view,
used to improve safe loading and secure positioning of the products on the belts.
Back longitudinal milling
Independent on the belt pitch, the belt back shaping offers a wide range of design
variants for customised solutions. In this manner, belt guiding can be achieved by
a trapezoidal back profile, or a round section supported and moved by means of
a prism shaped cross section. Dimensions are to be indicated as depth measure
x in relation to the belt back.
Back grinding
All CONTI® SyNChrOflex Timing Belts can be ground and finished for reasons
of precision or in order to obtain a roughened surface. Note that the belts must
not be ground to anything less than the overall thickness x because otherwise the
tension members might take damage.
Edge grinding
Particularly accurate belt width tolerances can be achieved by grinding the
belt edges.
Removing individual teeth
The removal of individual teeth or groups of teeth is possible and practical due to
the high dimensional precision meshing, when the remaining teeth are to serve as
precise position load areas.
Longitudinal milling of teeth
Machining the tooth profile is significant for CONTI® SyNChrOflex Timing Belts
which are protected from running off laterally for instance by bed plates. The processing depth x is indicated as measured from the tooth top surface.
Perforated timing belts
Aramide tension members should be preferably used with CONTI® SyNChrOflex
Timing Belts in this type of application.
80
Service and Accessories
list of Catalogues
All our information at a glance
All product information
can be requested from
your Mulco Partner.
BreCO®, BreCOflex® timing belts
BreCO® ATN-system
CONTI® SyNChrOflex Polyurethane Timing Belts. Overall catalog
CONTI® SyNChrOChAIN Timing belts for the highest torques
CONTI® SyNChrOChAIN heavy-Duty Timing Belts
CONTI® SyNChrODrIVe Polyurethane Synchronous Drive Belts
CONTI® SyNChrODrIVe N10 Nubbed Belt
New information material
available for download at
www.mulco.net
Polyurethane Flat Belts
BreCO®, BreCOflex® flat Belts
CONTI® POlyflAT PU flat Belts
Pulleys and Accessories
PUlleyS & COMPONeNTS for polyurethane timing belt drives
conti® SY
ncHRoFLE
x Polyur
overall ca ethane timing Belts
talog
C
timin onti ® SY
n
g belt
s for CHRoCHa
the h
in
ighes
t torq
ues
for
PUL
poly LEYS &
uret
C
han OMPO
e tim
N
ing ENTS
belt
driv
es
,B
demark
of
ark of Conti
FLE
X®
tim
be
lts
®
Registe
red tra
® Registered tradem
CO
ing
ContiTe
ch AG
Tech AG
RE
BR
EC
O®
AT
N
-sy
THE
THE POW
OWE
ER
R OF A
W
WE
ELLE
LL-M
MES
ESH
HED
ED GRO
U
UP.
PO
OW
WE
ER
OF A
WEL
ELL
L-M
-M
ESHE
ste
m
D GR
OUP.
THE
PO
OW
ER
E
OF
AW
EL
E
LL
L--M
MES
HED
GRO
UP.
MUlCO® is a registered trademark of
Wilhelm herm. Müller Gmbh & Co. KG,
heinrich-Nordhoff-ring 14, 30826 Garbsen, Germany.
TH
© 2012 Mulco-europe eWIV. All rights reserved.
EP
OW
ER
OF
A
WE
LL
-M
ES
HE
D
GR
OU
reproduction of the entirely of text or parts prohibited.
81
Notes
82
Addresses
THE POWER OF A WELL-MESHED GROUP.
Sales partners Germany
hilger u. Kern Gmbh
Antriebstechnik
Käfertaler Straße 253
68167 Mannheim
Phone: +49 621 3705-0
Fax: +49 621 3705-403
e-mail: [email protected]
www.hilger-kern.com
Wilhelm herm. Müller Gmbh & Co. KG
heinrich-Nordhoff-ring 14
30826 Garbsen
Phone: +49 5131 4522-0
Fax: +49 5131 4522-110
www.whm.net
roth Gmbh & Co. KG
Andernacher Straße 14
90411 Nürnberg
Phone: +49 911 99521-0
Fax: +49 911 99521-70
www.roth-ing.de
Anton Klocke Antriebstechnik Gmbh
Senner Straße 151
33659 Bielefeld
Phone: + 49 521 95005-01
Fax: + 49 521 95005-11
www.klocke-antrieb.de
reIff Technische Produkte Gmbh
Tübinger Straße 2-6
72762 reutlingen
Phone: +49 7121 323-0
Fax: +49 7121 323-318
www.reiff-tp.de
Walter rothermundt Gmbh & Co. KG
Am Tannenbaum 2
41066 Mönchengladbach
Phone: +49 2161 694620
Fax: +49 2161 664469
www.rothermundt.de
Sales partner France
Sales partner Sweden
BINDer MAGNeTIC
1, Allée des Barbanniers
92632 Gennevilliers Cedex
france
Phone: +33 1 461380-80
Fax: +33 1 461380-99
www.binder-magnetic.fr
Aratron AB
Smidesvägen 4 – 8
171 41 Solna
Sweden
Phone: +46 8 4041-600
Fax: +46 8 984281
www.aratron.se
Sales partner Austria
Sales partner Great Britain
Sales partner Spain
haberkorn Gmbh
Modecenterstraße 7
1030 Wien
Austria
Phone: +43 1 74074-0
Fax: +43 1 74074-99
www.haberkorn.com
Transmission Developments Co. (GB) ltd
Dawkins road
Poole, Dorset, Bh15 4hf
Great Britain
Phone: +44 1202 675555
Fax: +44 1202 677466
www.transdev.co.uk
Dinámica Distribuciones S.A.
Ctra. N. II, km 592,6
08740 S. Andreu de la Barca
Spain
Phone: +34 93 6533-500
Fax: +34 93 6533-508
www.dinamica.net
Do you need further information on the Mulco product range? Please contact us.
Mulco-Europe EWIV, Phone: +49 5131 4522-0, Fax: +49 5131 4522-110, e-mail: [email protected], www.mulco.net
83
THE POWER OF A WELL-MESHED GROUP.
SERVO VISION CO.,LTD
900/230 SUKHUMVIT 103 RD, BANGNA,BANGNA BANGKOK 10260 THAILAND
TEL:(662)743-2441-2 FAX: (662)749-5833 Url:www.servovision.com
E-mail: [email protected]; [email protected]
Facebook: http://www.facebook.com/hubmotorebike.escootterwindturbine

conti® SYncHRoFLEx Polyurethane timing Belts overall catalog

Transcription

Similar documents

CONTI® SYNCHROFLEX Polyurethane Timing Belts Overall

AT high performance Timing Belts

B - Thailand Directory

Product Range SYNCHROFLEX® Timing Belts

CONTI® SYNCHROFLEX Timing Belts

Product Range CONTI® SYNCHROFLEX

BRECO, BRECOFLEX timing belts