Dust Control System for Electric Disc Sanders

Dust Control System
for Electric Disc
Sanders
Great for sanding lap siding
We give you
better ways to
deal with dust
Model D1000
Fits Makita GV5000 & GV5010
Comes with 18”
Flexible Hose
The DiscBuddie™ is a point-of-origin dust control shroud
that meets EPA RRP requirements ONLY if it is used with
a certified HEPA vacuum that is specifically designed
for hazardous materials. It can be used to capture nonhazardous dust with any high-quality shop vacuum.
• Fast and easy to install
• Adjustable angle for operator
convenience
• Clear polycarbonate for superior
visibility
• Durable poly-carbonate (bulletproof glass material)
• 1-1/2” long brush on edges for
superior dust containment
• Great for sanding lap siding
• Captures up to 99% of airborne dust
• Point-of-origin dust control shroud
• Attaches quickly and easily
• Fits Makita GV5000 & GV5010
7” disc sander
DiscBuddie includes:
1 Dust shroud
1 releasable zip tie
1 18” hose
Retail ready box
800.568.3949
REV0512
dustlesstools.com
Name
Item #
Upc
Unit
Size
Case
Pk
DiscBuddie
D1000
617450040007
7”
1
WARNING! If using this product in the removal of lead paint, a Dustless® HEPA
vacuum must be used. The removal of old paint may generate dust or fumes that
contain lead. Exposure to lead may cause brain damage or other adverse health effects,
especially in young children and pregnant women. Follow all federal, state and local
laws including the U.S. Environmental Protection Agency’s Renovation, Repair and
Painting law or similar state law.