Auto Tape Dispenser EZ-9000 GR

Comments

Transcription

Auto Tape Dispenser EZ-9000 GR
Auto Tape Dispenser EZ-9000 GR
New Feature Allows for Sequential Dispensing of Different Tape Lengths
• Up to six different cut lengths can be • Pre-set and loop counter
programmed to cut by selection or in • No bobbin needed
sequence
• Built-in separator for cutting two tape
• Possible to cut two rolls of tape at the
rolls, guide plate, tweezers and blade
same time due to dual photo sensors
oil provided
• Cuts non-adhesive tapes
Product Specifications
ASG Number
66136
Tape Length
0.2 in. - 39 in. (5mm - 999 mm)
Tape Width
0.24 in. - 2.36 in. (6mm - 60mm)
Tape Thickness
0.002 in. - 0.012 in. (0.05 mm - 0.3mm)
Usable Tapes*
Craft, PP, Vinyl, Filament, Glass Cloth, Double-Sided, Strapping, Protective Film, Aluminum Foil, and Others
Feeding Speed
8.7 in./sec. (220mm/sec.)
Max. Outside
Diameter of Roll
11.8 in. (300mm)
Accessories
Separator, Blade Oil, Guide Plate, Tweezers, Power Cord
Body Material
Rated Voltage
Anti-static ABS
AC 100 V - 240 V
50/60 HZ
25 W
Dimensions
(W x H x D)
4.57 in. x 5.5 in. x 8.4 in. (116mm x 140mm x 213mm)
Weight
3.5 lbs. (1.6 kg)
Fuse 2A (AC Inlet Build-in)
* Some usable tapes may not cut depending on the material and tape brand
Auto Tape Dispenser EZ-9000 GR
NEW! Modular Blade and Roller Unit Allows for Easy On-Site Maintenance
EZ-9000 GR Accessories
EZ-9000 GR-RP
66161
Arm Mount Kit
66138
Includes arm and
mounting plate
Quality Certified ISO 9001:2008
ASG, Division of Jergens, Inc.
Jergens Way, 15700 S. Waterloo Road
Cleveland, OH 44110-3898
Toll Free: (888) 486-6163 | Fax: (216) 481-4519
Email: [email protected] | www.asg-jergens.com

Similar documents

illmod 600 12.02.02 2002 18542 since 1999 fire retardant resin

illmod 600 12.02.02 2002 18542 since 1999 fire retardant resin Short Description illmod 600 is an impregnated, precompressed foam tape. Since 1965, this tape has proven itself in driving rain resistant joint sealing in aboveground buildings. Since January 11, 1999, illmod 600 complies with all parameters required by DIN 18542 according to BG1 by the terms of the ift Test Report of January 11, 1999. Consistent high quality is ensured by permanent in-house and independent monitoring. Material Open-cell flexible polyurethane foam impregnated with a flame-retardant artificial resin. Colours ● Anthracite ● Grey Product Advantages ● Independently monitored during driving rain resistance up to 600 Pa (by MPA Bau (Construction), Hannover) ● Open to water vapour diffusion ● Self-adhesive on one side to facilitate installation ● Can be coated with commercially available vinyl emulsion paints ● Meets the RAL-Assembly Requirements Availability On pre-compressed rolls, self-adhesive on one side.

More information