FLEXSTAR® Belt - MBL(USA) Corporation

Transcription

V632-C
Te c h n o l o g y
Nature
Society
Industrial Power Transmission Products
• Please take all necessary precautions when using our products. Also, please review relevant product
catalog and design documents, etc.
Significances of safety precautions are categorized as follows:
Danger
Warning
Caution
Imminently causing death or severe injury to the user who misuses
products.
Possibly causing death or severe injury to the user who misuses
products.
Possibly causing personal injury or property damage if misused.
• If you expect that a belt will fail, and stop the system, provide safety device to avoid injury.
• Do not use a belt as a lifting or towing tool.
• If you expect that static electricity will come from the power transmission belt system, thus causing fire of malfunction of the
controller, use an antistatic belt and set a neutralization apparatus in the system.
• Do not use a belt as an insulator. Contact manufacturer for information on installation properties, which vary in belt type.
• For a belt that touches food directly, use one that compiles with the applicable food hygiene law of your country.
• Do not modify a belt, its quality and performance could deteriorate.
• Do not use a belt beyond its capacity of for an application other than that specified by the catalog, design documents, etc. This can
cause premature failure of the belt.
• If water, oil, chemical, paint, dust, etc. sticks to a belt or pulley, its power transmission could deteriorate and the belt may fail.
• A cogged belt makes louder noises during high-speed rotation. If this occurs, use a soundproof cover.
• To store a heavy belt, use a suitable jig or stopper to prevent accidents such as belt toppling or tumbling.
• Use suitable equipment to carry/handle a heavy belt or pulley. Otherwise, back injury may result.
• Do not put weight on or bend a belt forcibly to carry or store it. Otherwise, it will produce defects or scratches to the belt,
resulting in damage.
• Store the belt in low humidity and a temperature range of 14°F to 104°F. Do not expose belts to direct sunlight.
• Install a safety cover over rotating components including belt/pulley. Otherwise, hair, gloves and clothing can become entangled
in the belt/pulley. If a belt/pulley breaks, fragments may cause injuries.
• Take the following precautions to maintain, inspect, and replace a belt.
1) Turn off the power and wait until the belt and pulley have stopped completely.
2) Secure machinery so that it may not move during belt removal.
3) Use caution: Do not unintentionally turn on power.
• Use the same type of belt or pulleys per OEM specification. Use of a different type may cause premature failure.
• Misalignment of the pulleys can damage the belt and result in flange failure. Make proper adjustments to system.
• Loosen the belt tension when changing belts. Do not force or stretch a belt over the flange. Do not use a screw driver or other
sharp objects into when replacing the belt as this will result in damage.
• Apply the appropriate belt tension as specified by the relevant catalog and design documents, etc. Inappropriate tension could
result in damage of the belt and shaft.
• Take the following precautions to modify the pulley in use:
1) Remove burrs and maintain proper pulley angle;
2) Secure accurate dimensions after modification;
3) Maintain the pulley strength after modifications.
• Before assembling the flange with the pulley, check for foreign materials between the pulley and flange. Fasten the flange with
a appropriate tool. Inappropriate installation could result in the flange coming off.
i
• Do not burn belt; hazardous gas could be produced.
Danger
Warning
Caution
Imminently causing death or severe injury to the user who misuses
products.
Possibly causing death or severe injury to the user who misuses
products.
Possibly causing personal injury or property damage if misused.
• Do not use the belt as a lifting or towing device.
• To convey unpackaged food, use a belt that complieses with the applicable food hygiene laws of your country.
• To store a large plastic conveyor belt, use a suitable jig or stopper to prevent accidents due to belt toppling or tumbling.
• Use suitable equipment to carry and handle large plastic conveyor belts. Otherwise, back injury may result.
• Before fitting and inspecting the plastic conveyor belt, be sure to turn off the power of the conveyor and related systems and check to make sure that conveyor
has stopped, to prevent accidents.
• Fix a safety guard to avoid close contact with conveyor belt in use. Otherwise, you may become entangled in the conveyor system.
• Solvents and adhesives used for endless type belts is flammable. Open flames are allowed during operation.
• Provide an additional safety device that will stop power to avoid fatal accident should coupling break or come free!
• Do not use product for applications other than specified in the catalog, design documents, etc. Otherwise, the product could fail prematurely.
• Use an appropriate jig or stopper to prevent a large coupling from toppling and tumbling. Do not store coupling at a height where it could cause injury if it fails.
• Use suitable equipment when carrying or handling a large coupling, depending on its weight. Otherwise, back injury may result.
• Be sure to put a safety cover over the the rotating components including the coupling. Otherwise, hair, gloves, or clothing may become entangled. Also, injury
may occur if parts fly off.
• Secure coupling. Otherwise, the coupling and its parts may come off.
• Take the following precautions to maintain, inspect or replace coupling.
1) Turn off the power and wait until the machine stops completely.
2) Fix machinery so that it may not move during removal of the coupling.
3) Take care not to unintentionally turn on the switch.
• Before you operate the machine, check to make sure unused bolts or tools are removed after installation of the coupling. If operation starts with unused items
being left behind, they could be flung off, causing injuries.
• Replace with the same type of couplings. Use of a different type of coupling will result in premature failure.
• Adjust coupling property. Otherwise, deflection or declination will damage or displace the coupling.
• Do not burn the coupling. Otherwise, hazardous gas could be produced.
ii
iii
iv
v
Has
vi
vii
viii
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. i - ii
Gigatorque GX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. iii - vii
Metric V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. viii
Power Transmission Belts and Related Products
I. Synchronous Power Transmission . . . . . . . . . . . . . . . . . . . . . . . P. 1 - 28
II. Frictional Forced
Power Transmission Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 29 - 54
III. Direct Power
Connected Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 55 - 57
IV. Troubleshooting for
Power Transmission Products . . . . . . . . . . . . . . . . . . . . . . . . P. 58 - 59
Memo
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 60
Global Factories & Sales Offices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 61
Application Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 2 & 3
Lineup of Belts and Related Products . . . . . . . . . . . . . . . . . . . . . .P. 4 & 5
I
Industrial Power Transmission Products Selection Chart . . . . . .P. 6 & 7
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 8
Synchronous Power Transmission
Round Tooth Timing Belt
Belt Type, Dimensions & Product Code . . . . . . . . . . . . . P. 10
Super Torque® Timing Belt G . . . . . . . . . . . . . . . . . . P. 11 & 12
Super Torque® Timing Belt G . . . . . . . . . . . . . . . . . . . . . . P. 13
Super Torque® Timing Pulley . . . . . . . . . . . . . . . . . . . . . . P. 14
Mega Torque® Timing Belt G & u . . . . . . . . . . . . . . P. 15 & 16
II
H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 17
Trapezoidal Tooth Timing Belt
Belt Type, Dimensions & Product Code . . . . . . . . . . . . . P. 18
Timing Belt G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 19 - 21
Timing Belt u . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 22 & 23
Timing Pulley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 24 & 25
green eco® Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 26
Other type of Timing Belts
LONG-SPAN Timing Belt . . . . . . . . . . . . . . . . . . . . . . . . . . P. 27
FREESPAN® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 28
Frictional Forced Power Transmission
Conventional V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 30
Double Angle Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 45
Triplex® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 31 & 32
Ribstar® Belt G (Rubber V-Ribbed Belt) . . . . . . . . . . . . . . P. 46
Maxstar Wedge Supreme® V-Belt . . . . . . . . . . . . . . . . . . . . P. 36
SuPER FLEXSTAR® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 49
Conventional Banded . . . . . . . . . . . . . . . . . . . . . . . . .P. 33 & 34
Triplex® Rawedge Cogged Banded . . . . . . . . . . . . . . . . . .P. 35
Super VS® Belt (Variable Speed Belt) . . . . . . . . . . . . . . . . P. 47
FLEXSTAR® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 48
Maxstar Wedge Narrow Banded . . . . . . . . . . . . . . . P. 37 & 38
POLYMAX Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 50
FHP V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 42
PRENE V-ROPE, PRENE HEXAGONAL-ROPE . . . . . . . . P. 52
Multi Super Wedge II . . . . . . . . . . . . . . . . . . . . . . . . . .P. 39 & 40
®
Maxstar Wedge Supreme® Narrow Cogged Banded . . . P. 41
MBL Super KB® Premium FHP Belt . . . . . . . . . . . . . . . . . P. 43
MB Belt® (Polyurehene V-Belt) . . . . . . . . . . . . . . . . . . . . . . P. 51
STARROPE®, SuPER STARROPE®
FLAT Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 53
III Direct Power Connected Transmission
Narrow V-Belt for DIN 7753/ISO4184 . . . . . . . . . . . . . . . . . P. 44
Chemi-Chan® (High Performance
FLEXSTAR® Belt J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 54
HYPERFLEX Coupling (MT-MH) . . . . . . . . . . . . . . . . . . .P. 57
IV Troubleshooting for Power
Transmission Products
Miniature Coupling) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 56
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 58 - 59
1
Large Knitting Machine (Super Torque Timing Belt)
Polisher (Super Torque Timing Belt)
Copier (Rubber Timing Belt)
Heavy Duty Polisher (Maxstar Wedge V-Belt)
2
Combine (V-Belt for Agricultural Machines)
Food Processor (Ribstar Belt)
Marine Engine (TSCHAN® Coupling S)
Packaging Machine (Polyurethane Double Timing Belt)
Plastic Card Vender (Polyurethane Timing Belt)
Actuator (Chemi-Chan®)
Dryer (V-Belt)
NC Lathe (Ribs Belt)
* To show the application examples clearly, safety covers are removed in the
pictures on this page.
Always put on the safety covers when in use.
NC Lathe (Multi-POLYMAX Belt)
3
Conventional V Belt
(General use: Rubber)
Super Torque® Timing Belt
Page 11
Mega Torque® Timing Belt G&U
(Heavy-duty use)
Page 30
Conventional Banded
Page 15
Page 33
FHP V-Belt
Timing Belt G
Page 19
Timing Belt U
(General use: Polyurethane)
Page 42
MBL Super KB®
Premium FHP Belt
Page 22
Page 43
Maxstar Wedge Supreme
V-Belt
®
green eco Series
®
Page 26
LONG-SPAN Timing Belt
(Endless & Open End)
Page 36
Maxstar Wedge
Narrow Banded
®
Page 27
Page 37
Multi Super Wedge II
Timing Pulley
Page 24
Perforated V-Rope
Chemi-Chan®
(High Performance
Miniature Coupling)
Page 56
V-Belt with Lugs
(Agricultural use)
HYPERFLEX® Coupling (MT-MH)
Page 57
Double Angle Belt
4
Page 45
Triplex®
Rawedge Cogged
V-Belt
Ribstar® Belt G
(Rubber)
Page 46
Page 31
SUPER GOLD 1000
Raw Edge Cogged V-Belt
(Agricultural use)
POLYMAX Belt
(Wide-angle Polyurethane V-Belt)
Raw Edge MULTI-PLY V-Belt
(Automotive use)
MB Belt
(For Sewing Machine)
Raw Edge Cogged V-Belt
(Automotive use)
STARROPE® & SUPER STARROPE®
(Polyurethane Round Rope)
Page 50
Page 51
Page 52
PRENE V-ROPE & HEXAGONAL-ROPE (Polyurethane Rope)
Super VS Belt
(Variable Speed Belt)
®
Page 52
Page 47
e-POWER Belt
(Cogged type)
FLEXSTAR®
MB BUSHING
SUPER FLEXSTAR
(Heavy-duty use)
SLEEVE ROLL
FLEXSTAR® Belt J
(For Conveyor)
®
Page 48
®
Page 49
Page 54
Flat Belt
(For Lifter)
Flat Belt
(General use)
Page 53
5
What features
do you need?
How do you
want to use it?
How much slip
can you allow?
Type of Belt/Pulley
Slip
Drive
Tolerance Classification
Applications
Mitsuboshi Products Lineup for Power Transmission Belts
Tooth Shape or Form
Material
Office & Home appliances
High power transmission,
heat resistance, water resistance,
flex fatigue resistance
General use (for motor drive)
Round tooth
No slip
allowed
Synchronous Power Transmission
Printer
General use
Rubber
SUPER TORQUE GA
S8M • FS9.525M • MY • MR • S5M • XY • XR
SUPER TORQUE G Double Timing
DS3M • DS5M • DS8M • DS14M
Long-span drive
SUPER TORQUE G Open-End
S2M • S3M • S5M • S8M • S14M
Synchronous transportation
SUPER TORQUE G Endless
S8M • S14M
Accurate positioning
STARMAX® G
ST1.5 • ST55 • ST64 • ST80 • ST83 • ST2.0 • ST111
Ozone resistance
green eco® Series
S2M • S3M• ST1.0 • ST1.5 • ST2.0 • ST55 • ST80 • ST83 • ST111
MEGA TORQUE G
MTS5M • MTS8M • MTS14M
MXL • XXL • XL • L • H • XH • XXH
Heat resistance
TIMING BELT GA
ZA • ZAS • ZB • ZBS
Multi-pulley, double-sided drive
TIMING BELT G Double Timing
DMXL • DXL • DL • DH
Long-span drive
TIMING BELT G Open-end
MXL • XL • L • H
TIMING BELT G Endless
L • H • XH • XXH
Ozone resistance
green eco® Series
MXL • XL
Printer
STARMAX® G
T80 • T83 • T111
Office & Home appliances
Clean drive
SUPER TORQUE U
S2M • S3M
Long-span drive
SUPER TORQUE U Open-End
S2M • S3M
Low-speed, high-torque use
MEGA TORQUE U
MTS8M
Timing
Belt
General use
Printer
Trapezoidal tooth
Round tooth
Thermosetting
polyurethane
Trapezoidal tooth
STARMAX® U
ST83 • ST111
STARMAX® U
T80 • T83 • T111
Clean drive
TIMING BELT U
T80 • T5 • T10 • XL • L
TIMING BELT U Double Timing
DT5 • DT10
Long-span drive
TIMING BELT U Open-end
Home appliances
General use
General use
Round tooth
Thermoplastic
polyurethane Trapezoidal tooth
Less thickness
Standard
Office & Home appliances,
General us
(based on ISDO standard)
Notched type
Less thickness
Rubber
FREESPAN® Belt
Less thickness
type
Light-duty use, compact design
FHP
3L • 4L • 5L
General use
Conventional V-Belt
K•M•A•B•C•D•E
High power transmission
Red label V-Belt
General use
e-POWER®
A•B•C
Heavy-duty use, compact design
MAXSTAR WEDGE V
3V • 5V • 8V
Anti-vibration
Banded MAXSTAR WEDGE V-Belt
R3V • R5V • R8V
Flex resistance
Conventional V-Belt
High resistance, flex resistance
Orange label L type
High resistance, flex resistance
Gold Label L type
Heat resistance, flex resistance, anti-vibration
AG SERIES
Orange label Raw Edge COGGED
SUPER GOLD 1000 Raw Edge COGGED
e-POWER®
AX • BX • CX
TRIPEX® Rawedge Cogged V-Belt
AX • BX • CX
TRIPEX® Rawedge Cogged Banded
RBX • RCX
MAXSTAR EDGE SUPREME®
3VX • 5VX
Banded MAXSTAR WEDGE SUPREME®
R3VX • R5VX
Rubber dust free,
belt clutch
Banded MAXSTAR WEDGE
SUPREME BACK-V
M•A•B•C
Abrasion resistance
REMF®
HM • A • B • BC
HM • A • B
Narrow width
type
Standard
Flat
Plain
Raw
Edge
Multi-ply
Low noise
MPMF®
Abrasion resistance, flex assistance
RECMF®
Especially for small diesel automotives
WFC
Lateral pressure resistance
RCVS, SUPER VS
Lateral pressure, high power transmission
DCVS
Top width 20 mm - 120 mm
AGVS®
HI • HJ • HK • HL • HM • HN
Raw Edge Cogged
(Variable speed)
Friction Forced Transmission
Heavy-duty agricultural use
Home appliances,
agricultural use, general use
Wrapped (Variable speed)
Thermosetting
polyurethane
General use,
agricultural use
Elevating machine (agricultural use)
Wide-angle
FA (for elevating machine)
A•B
®
®
High-speed revolution, compact design
POLYMAX
3M• 5M • 7M • 11M
Banded POLYMAX
R5M • R7M • R11M
Light-duty, clean drive
MB Belt
MB
Processed joint
Good flex resistance
PORT®, HARBOUR®, SPECIAL PORT®
P • H • SP
ECHO®, PIONEER®
EC • P
Less stretch and runout
DRY FLEX®
AA • O • OW • TN
High-speed drive, compact design
FLEXSTAR®
FL • FM • FH • FLEG • FLG • FLE• FMG • FHG
High tensile force
SUPER FLEXSTAR®
FU • FWQ • FY
Less stretch
FREESPAN® Flat Belt
Flat belt with V rail
Cord core flat type
Polyurethane
Cord core flat
Rubber
Thin Flat
Belt
ATM, ticket vending
machine
Millable
Polyurethane
Laminated flat type
Office & Home
appliance, general use
Good driving stability,
compact design,
maintenance-free
JL • JLB• JL3
FLEX STAR® Belt J
No cord and canvas flat type
JU • JLU2 • JLU5 • JLU6
RIBSTAR G (Bare-back type)
Round
Belt
(Square
Belt)
RIBSTAR U
Flex resistance, high-speed revolution
RIBSTAR U
Hexagonal
Double Angle V-Belt
AA • BB • CC
Standard perforated V rope
Adjustable belt length
Perforated V-Belt
M•A•B•C
Rib
Rubber
Direct Connect
Power Transmission
6
Coupling
HB • JT • JBT • J
STARROPE
®
Round rope
General Industries
Light-duty use
Agricultural use (for vegetable harvestor) Rubber
Agricultural use (for straw conveyor)
General use, Office &
Home appliances,
agricultural use
Rubber
PRENE V-ROPE
Adjustable belt length, processing joint
Aluminum
Aluminum
M•A•B
PREVE HEXAGONAL-ROPE
AA • BB
LA • LB • LC
Sponge backing type
Sponge backing
Sponge backing V-Belt
Standard type
Back protrusion for straw conveying
V-Belt with lugs
A•B•C
NOR-MEX®
G • FG • LG • E • FE • LE
Steel
Cast Iron
Office appliance, precision machinery
SUPER STARROPE®
Polyurethane
Hexagonal rope
Direct
Connected
Power
Transmission
J • PK • L
PK
V rope
Special
Belt
HB
Flex resistance, high power
transmission, high-speed revolution
Office & Home appliance, general use Polyurethane
General Industries,
agricultural machinery
JN • J2N
YG
Rubber
Automotive use
F20 • F20D
J8GA • J8GE • J8H • J8HB • J6H• J6HB • J3H • J3HB
Rubber
V-Ribbed
Belt
Top width 10 mm - 120 mm
Cogged type
General use
Press
HM • A • B • BC • C • CD
®
Round edge
Cut edge
Rubber
LA • LB • LC
Cogged
Wide-angle cogged
Motorcycle, general use
LA • LB • LC
Low contraction
Energy-Saving
Automotive use
LA • LB • LC
SUPER GOLD 1000
Standard type
General use
Home appliance,
agricultural use
T5 • T10 • AT5 • AT10 • XL • L • H
Heat resistance, flex resistance, anti-vibration
Raw
Edge
Cogged
T80 • XL • L
S5M • S8M
Long-span drive
Agricultural use
Flat
Belt
S8M • S14M
TIMING BELT G
General use
Note: Take
slip ratio
as
approx.
1%
S2M • S3M • S5M
SUPER TORQUE G
Low-speed, high-torque use
General use
Some slip
is allowed.
SUPER TORQUE GN
Synchronous Power transmission
Automotive use (for engine only)
V-Belt
Type
Automotive use (for engine drive)
General use
Product Name
Features
Flexible, Direct
Connected Power
Transmission
Shock absoption, anti-vibration
Good attenuation performance
S Series
S • SV • SX •SZ
HYPERFLEX®
MT • MH
Chemi-chan®
HAS
• Selecting Power Transmission Belts and Related Products
A wide range of products are available at Mitsuboshi to suit your needs.
Refer to the following property chart when selecting belts
High
Compactpowertransmission design
Flexibility
HighSpeed
drive
MultiPulley
Joint
processing
Smooth
operation
Continuous
speed
change
Back side
drive
Back side
tension
Alignment
Frequent
start &
stop
Excellent . . . . . . . . . . . . . . . . . . . . . . . . .
Good . . . . . . . . . . . . . . . . . . . . . . . . . . . .No sign
Caution needed when in use . . . . . . . . .
Not suitable . . . . . . . . . . . . . . . . . . . . . .
Cold
Acid
Heat
Water
Oil
Alkall
Ozone
resistance resistance resistance resistance resistance resistance resistance
Weather
resistance
Noise
Vibration
7
Dimensions
Material
Model
SUPER TORQUE Timing Belt
(Round tooth)
MEGA TORQUE Timing Belt
Highest Speed
(m/sec)
Pitch (mm) 2.00
3.00
5.00
8.00
14.00
9
13
22
56
151
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
Polyurethane
S2M
S3M
MTS5M
MTS8M
MTS14M
2.00
3.00
Pitch (mm) 5.00
8.00
14.00
9
13
22
56
151
30 (40)
30 (40)
30
30
30
MXL
XL
L
H
XH
XXH
T80
T5 • DT5
T10 • DT10
XL
L
A
B
C
D
E
3V
5V
8V
Pitch (mm) 2.032
5.08
9.525
12.700
22.225
31.750
Pitch (mm) 2.032
5.0
10.0
5.08
9.525
12.5x 9.0x 40
16.5x 11.0x 40
22.0x 14.0x 40
31.5x 10.0x 40
38.0x 25.5x 40
9.5X 8.0X 40
15.9X 13.5X 40
25.4x 22.0x 40
7
16
30
57
127
182
7
19
45
16
30
95 (67)
150 (118)
224 (180)
355 (300)
560 (450)
67
180
315
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30 (40)
30
30
30
30
30
40
40
40
Rubber
Polyurethane
Conventional V-Belt
Rubber
MAXSTAR WEDGE V-BELT
Rubber
Banded MAXSTAR WEDGE V-Belt
(Joined V-Belt)
Rubber
3V
5V
8V
RIBSTAR Belt
(V-Ribbed Belt)
Rubber
J
PK
L
Polyurethane
®
FLEXSTAR Belt
Rubber
POLYMAX Belt
Polyurethane
®
Minimum Pulley Diameter
(mm)
S2M
S3M
S5M
S8M
S14M
Rubber
MB Belt (Polyurethane V-Belt)
Cross-Sectional Dimensions
top width (mm) x thickness (mm) x angle (O)
Rubber
Timing Belt
(Trapezoidal tooth)
Polyurethane
®
STARROPE /SUPER STARROPE
Polyurethane
8
Type
PRENE V-ROPE
Polyurethane
PRENE HEXAGONAL-ROPE
Polyurethane
67
180
315
40
40
40
Pitch (mm) 2.34
3.56
4.70
31.5 (25)
56 (50)
90 (80)
40 (50)
40 (50)
40 (50)
Pitch (mm) 2.34
Belt Thickness (mm) 1.5
2.5
3.5
3.0x 2.0x 60
5.0x 3.0x 60
7.0x 3.0x 60
11.0x 7.0x 60
20
16
40
80
17
26
42
67
30 (35)
40 (60)
40 (60)
40 (60)
40
40
40
40
MB
6.0x 4.0x 40
16
10
2
3
4
5
6
7
8
9
10
12
15
M
A
B
AA
BB
Diameter omm 2
3
4
5
6
7
8
9
10
12
15
10.0x 5.5x 40
12.5x 8.5x 40
16.5 x 10.5x 40
12.5x 10.0x 40
16.5x 12.5x 40
15/ 20 super
20/ 30
30/ 40
40/ 50
50/ 60
60/ 70
70/ 80
85/ 90
95/ 100
120/ 120
150/ 150
40
85
100
100
130
JT • JBT
FL
FM
FH
3M
5M
7M
11M
10 and below
10
10
10
10
10
10
10
10
10
10
10 and below
10
10
10 and below
10
I Synchronous Power
Transmission
Belt Type, Dimensions & Product Code . . . . . . P. 10
Super Torque® Timing Belt G . . . . . . . . . . P. 11 & 12
Super Torque® Timing Belt G . . . . . . . . . . . . . . P. 13
Super Torque® Timing Pulley . . . . . . . . . . . . . . P. 14
Mega Torque® Timing Belt G & u . . . . . . . P. 15 & 16
H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 17
Belt Type, Dimensions & Product Code . . . . . . P. 18
Timing Belt G . . . . . . . . . . . . . . . . . . . . . . . P. 19 - 21
Timing Belt u . . . . . . . . . . . . . . . . . . . . . . . P. 22 & 23
Timing Pulley . . . . . . . . . . . . . . . . . . . . . . . P. 24 & 25
green eco® Series . . . . . . . . . . . . . . . . . . . . . . . P. 26
Other Timing Belt
LONG-SPAN Timing Belt . . . . . . . . . . . . . . . . . . P. 27
FREESPAN® Belt . . . . . . . . . . . . . . . . . . . . . . . . . P. 28
9
Belt Type, Dimensions & Product Code
Belt Type
Standard Dimensions
Code
Miniumum Pulley Size *1
Product Code
Standard Width
Width
Pulley diameter (mm)
No. of teeth
Pitch Line
S2M
40
60
100
4mm
6mm
10mm
Belt
G (rubber)
Type
Belt Type
8.91
14
Nominal Length(mm)
Belt Width(mm)x10
Belt
60
100
150
6mm
10mm
15mm
Belt Tooth Pitch 3mm
Belt Type
G (rubber)
Type
*In case of
double timing
belt, use DS3M
13.37
14
Nominal Length(mm)
Belt Width(mm)x10
10mm
15mm
25mm
Belt
Belt Type
G (rubber)
Type
22.28
14
* In case of
double timing
belt, use DS5M
Pitch Line
150
250
300
400
600
15mm
25mm
30mm
40mm
60mm
Belt Width
(mm)x10
400 40mm
600 60mm
800 80mm
1000 100mm
1200 120mm
Nominal
Length(mm)
56.02
22
Belt Type
* In case of
double timing
belt, use DS8M
10
Money changing
machine
Belt Width
(mm)x10
* In case of
double timing
belt, use DS14M
• Instrumentation
Rotary machine
Computer
Recorder
VTR
Oscillograph
Fish sonar finder
Data processing
system
Flaw-detecting
Various test
machines
• Others
Blender
Toys
Mixer
Medical systems
Sewing machine
Health equipment
Electrical tools
Nominal Length(mm)
Note counter
Cash Register
Vacuum cleaner
Belt Width(mm)x10
S14M
ATM
Word Processor
• Home Appliances
100
150
250
S8M
Ticket gate
Typewriter
Robot
Pitch Line
S5M
Ticketing machine
Printer
Depth finder
U(polyurethane)
Type
• Automatic Vending
Machine
Facsimile
• Electronic
Applications
Pitch Line
S3M
• OA Equipment
X-Y plotter
U(polyurethane)
Type
Applications
G (rubber)
Type
Nominal
Length(mm)
Belt Type
G (rubber)
Type
• Woodworking
• Machine tools
machinery
Drilling machine, lathe
• Textile machinery
Screw cutting machine
Textile spinning
Boring machine
machine
Grinding machine
Yarn twisting machine Milling machine
• Paper making
NC lathe
machinery
• Printer
Mixer
Dryer
Calender
• Fan/Blower
• Blower
151.52
34
• Screen
• Mill hammer
Ball
Rod
Pebble
• Paper making
machinery
Mixer
Dryer
Calender
Super Torque® Timing Belt G
Since the round tooth shape allows smooth meshing with pulleys, this
belt is the most suitable for applications which requires high accuracy and
smooth revolution such as computers and office appliances.
•
•
•
•
Improved flexibility of this belt enables use of smaller diameter pulleys
Smooth meshing allows noiseless operation
Usable with low shaft load
Possible to transmit high torque with a small belt
Standard Belt Sizes
Belt Type
Tooth Pitch
Code (width)
S2M
2.0(mm)
40 (4mm) 60(6mm) 100(10mm)
Product Code
Size
No. of
Teeth
Belt Pitch Manufacturable Size
Length (mm) G
U
Product Code
No. of
Teeth
Belt Pitch
Length (mm)
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
66
72
74
76
78
80
84
86
88
90
33
36
37
38
39
40
42
43
44
45
66
72
74
76
78
80
84
86
88
90
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
302
304
306
308
310
312
314
316
318
320
151
152
153
154
155
156
157
158
159
160
302
304
306
308
310
312
314
316
318
320
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
92
94
96
98
100
102
104
106
110
112
46
47
48
49
50
51
52
53
55
56
92
94
96
98
100
102
104
106
110
112
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
322
324
326
328
330
334
338
340
342
344
161
162
163
164
165
167
169
170
171
172
322
324
326
328
330
334
338
340
342
344
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
114
116
118
120
122
124
126
128
130
132
57
58
59
60
61
62
63
64
65
66
114
116
118
120
122
124
126
128
130
132
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
348
350
354
360
370
372
374
376
380
386
174
175
177
180
185
186
187
188
190
193
348
350
354
360
370
372
374
376
380
386
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
134
138
140
142
144
146
148
150
152
156
67
69
70
71
72
73
74
75
76
78
134
138
140
142
144
146
148
150
152
156
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
390
396
400
408
410
426
430
434
436
438
195
198
200
204
205
213
215
217
218
219
390
396
400
408
410
426
430
434
436
438
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
158
160
164
166
168
170
172
174
176
178
79
80
82
83
84
85
86
87
88
89
158
160
164
166
168
170
172
174
176
178
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
440
442
444
448
452
456
460
468
474
480
220
221
222
224
226
228
230
234
237
240
440
442
444
448
452
456
460
468
474
480
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
180
182
184
186
188
190
192
194
196
198
90
91
92
93
94
95
96
97
98
99
180
182
184
186
188
190
192
194
196
198
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
486
488
494
500
520
530
550
560
572
580
243
244
247
250
260
265
275
280
286
290
486
488
494
500
520
530
550
560
572
580
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
200
202
204
206
208
210
212
214
216
218
100
101
102
103
104
105
106
107
108
109
200
202
204
206
208
210
212
214
216
218
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
586
594
600
604
630
638
640
648
656
660
293
297
300
302
315
319
320
324
328
330
586
594
600
604
630
638
640
648
656
660
B
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
220
224
226
230
232
234
236
238
240
242
244
110
112
113
115
116
117
118
119
120
121
122
220
224
226
230
232
234
236
238
240
242
244
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
672
676
694
710
726
740
752
796
800
810
336
338
347
355
363
370
376
398
400
405
672
676
694
710
726
740
752
796
800
810
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
246
248
250
252
254
256
258
260
262
264
123
124
125
126
127
128
129
130
131
132
246
248
250
252
254
256
258
260
262
264
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
266
268
270
272
274
276
278
280
284
286
288
290
292
296
300
133
134
135
136
137
138
139
140
142
143
144
145
146
148
150
266
268
270
272
274
276
278
280
284
286
288
290
292
296
300
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
822
826
848
856
862
866
880
882
900
910
930
944
976
984
1016
1062
1066
1100
1136
1140
411
413
424
428
431
433
440
441
450
455
465
472
488
492
508
531
533
550
568
570
822
826
848
856
862
866
880
882
900
910
930
944
976
984
1.016
1.062
1.066
1.100
1.136
1.140
B
B
B
B
B
B
B
S2M
S2M
S2M
S2M
S2M
S2M
S2M
1196
1224
1250
1274
1290
1420
1524
598
612
625
637
645
710
762
1.196
1.224
1.250
1.274
1.290
1.420
1.524
Manufacturable Size
G
U
• For S2M and S3M, polyurethane (U) and rubber (G) models are available. Choose the appropriate material for your application.
• (D) signifies the standard size of double timing belt G (rubber) type.
• Sizes not indicated above are also available under limited conditions.
11
Belt Type
Tooth Pitch
Code (width)
S3M
3.0(mm)
60(6mm) 100(10mm) 150 (15mm)
Product Code
Size
12
No. of
Teeth
Belt Pitch
Length (mm)
Manufacturable Size
G
Product Code
U
S5M
5.0(mm)
100 (10mm) 150(15mm) 250(25mm)
No. of
Teeth
Belt Pitch
Length (mm)
Manufacturable Size
G
Product Code
U
No. of
Teeth
Belt Pitch
Length (mm)
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
96
102
114
120
123
129
132
141
144
147
32
34
38
40
41
43
44
47
48
49
96
102
114
120
123
129
132
141
144
147
B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
483
486
492
498
501
504
507
510
513
516
161
162
164
166
167
168
169
170
171
172
483
486
492
498
501
504
507
510
513
516
B
B
B
B
B
B
B
B
B
B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
225
230
255
260
295
300
305
320
325
340
45
46
51
52
59
60
61
64
65
68
225
230
255
260
295
300
305
320
325
340
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
150
156
159
162
168
171
174
177
180
186
50
52
53
54
56
57
58
59
60
62
150
156
159
162
168
171
174
177
180
186
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
519
522
525
528
537
540
543
549
552
564
173
174
175
176
179
180
181
183
184
188
519
522
525
528
537
540
543
549
552
564
B
B
B
B
B
B
(D) B
(D) B
(D) B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
350
360
370
375
380
390
400
415
425
435
70
72
74
75
76
78
80
83
85
87
350
360
370
375
380
390
400
415
425
435
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
189
192
195
198
201
204
207
210
213
218
63
64
65
66
67
68
69
70
71
72
189
192
195
198
201
204
207
210
213
216
B
(D) B
B
(D) B
B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
570
573
576
579
582
588
591
597
600
603
190
191
192
193
194
196
197
199
200
201
570
573
576
579
582
588
591
597
600
603
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
440
450
475
490
500
520
525
530
545
550
88
90
95
98
100
104
105
106
109
110
440
450
475
490
500
520
525
530
545
550
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
219
222
225
228
231
234
237
246
249
252
73
74
75
76
77
78
79
82
83
84
219
222
225
228
231
234
237
246
249
252
(D) B
(D) B
(D) B
B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
609
612
621
624
633
645
648
657
660
663
203
204
207
208
211
215
216
219
220
221
609
612
621
624
633
645
645
657
660
663
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
B
(D) B
(D) B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
560
575
590
595
600
625
640
650
665
670
112
115
118
119
120
125
128
130
133
134
560
575
590
595
600
625
640
650
665
670
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
255
258
264
267
270
273
276
279
282
285
85
86
88
89
90
91
92
93
94
95
255
258
264
267
270
273
276
279
282
285
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
666
672
681
687
699
720
726
741
750
753
222
224
227
229
233
240
242
247
250
251
666
672
681
687
699
720
726
741
450
753
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
675
690
695
700
710
720
725
730
740
750
135
138
139
140
142
144
145
146
148
150
675
690
695
700
710
720
725
730
740
750
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
288
291
300
303
306
309
312
315
318
327
96
97
100
101
102
103
104
105
106
109
288
291
300
303
306
309
312
315
318
327
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
756
759
762
765
774
786
789
804
810
819
252
253
254
255
258
262
263
268
270
273
756
759
762
765
774
786
789
804
810
819
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
765
780
800
810
830
845
850
870
890
900
153
156
160
162
166
169
170
174
178
180
765
780
800
810
830
845
850
870
890
900
B
B
B
B
B
B
B
B
B
B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
330
333
339
345
348
351
354
357
360
363
110
111
113
115
116
117
118
119
120
121
330
333
339
345
348
351
354
357
360
363
930
950
975
1,000
1,025
1,050
1,055
1,085
1,090
1,100
366
369
372
375
378
384
387
390
393
396
825
831
837
852
858
882
888
894
900
909
918
186
190
195
200
205
210
211
217
218
220
122
123
124
125
126
128
129
130
131
132
275
277
279
284
286
294
296
298
300
303
306
930
950
975
1000
1025
1050
1055
1085
1090
1100
366
369
372
375
378
384
387
390
393
396
825
831
837
852
858
882
888
894
900
909
918
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
B
B
B
B
B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
B
(D) B
(D) B
(D) B
(D) B
(D) B
B
(D) B
(D) B
927
954
999
1,005
1,014
1,035
1,050
1,080
1,119
1,170
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
1,105
1,115
1,120
1,125
1,135
1,145
1,160
1,165
1,195
1,225
399
402
405
408
414
417
420
423
426
432
309
318
333
335
338
345
350
360
373
390
221
223
224
225
227
229
232
233
239
245
133
134
135
136
138
139
140
141
142
144
927
954
999
1005
1014
1035
1050
1080
1119
1170
1105
1115
1120
1125
1135
1145
1160
1165
1195
1225
399
402
405
408
414
417
420
423
426
432
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
435
444
447
453
456
459
468
471
474
480
145
148
149
151
152
153
156
157
158
160
435
444
447
453
456
459
468
471
474
480
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
B
(D) B
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
S3M
1203
1221
1236
1245
1260
1290
1299
1326
1332
1401
1419
1521
1560
1572
401
407
412
415
420
430
433
442
444
467
473
507
520
524
1,203
1,221
1,236
1,245
1,260
1,290
1,299
1,326
1,332
1,401
1,419
1,521
1,560
1,572
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
1250
1270
1295
1350
1420
1475
1500
1505
1530
1595
250
254
259
270
284
295
300
301
306
319
1,250
1,270
1,295
1,350
1,420
1,475
1,500
1,505
1,530
1,595
(D) B
(D) B
(D) B
(D) B
(D) B
S3M
S3M
S3M
S3M
S3M
1596
1680
1788
2100
2115
532
560
596
700
705
1,596
1,680
1,788
2,100
2,115
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
(D) B
B
(D) B
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
S5M
1605
1680
1715
1800
2000
2145
2255
2480
2525
321
336
343
360
400
429
451
496
505
1,605
1,680
1,715
1,800
2,000
2,145
2,255
2,480
2,525
• For S2M and S3M, polyurethane (U) and rubber (G) models are available. Choose the appropriate material for your application.
• Sizes not indicated above are also available under limited conditions.
Since this round tooth belt has a high power transmission
property, it expands existing applications of timing belts significantly.
Also, it can be used as an alternative for chains and gears.
•
•
•
•
Standard Belt Sizes
Belt Type
S8M
Tooth Pitch
S14M
8.0(mm)
Code (width)
14.0(mm)
150(15mm) 250(25mm) 300(30mm) 400(40mm)
Product Code
Size
A high power transmission property usable in a wide variety of applications
Longer operating life
Quiet operation
Cost-effective
No. of Teeth
400(40mm) 600(60mm) 1000(100mm) 1200(120mm)
Pitch Length (mm)
Product Code
1008
1120
1190
1246
1288
1400
1540
1610
1652
1708
No. of Teeth
72
80
85
89
92
100
110
115
118
122
Pitch Length (mm)
1,008
1,120
1,190
1,246
1,288
1,400
1,540
1,610
1,652
1,708
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
376
400
440
480
496
512
520
528
560
584
47
50
55
60
62
64
65
66
70
73
376
400
440
480
496
512
520
528
560
584
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B S14M
B S14M
B S14M
B S14M
B S14M
B S14M
B S14M
B S14M
B S14M
B S14M
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
B S8M
600
632
640
656
680
712
720
760
800
824
75
79
80
82
85
89
90
95
100
103
600
632
640
656
680
712
720
760
800
824
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S14M
S14M
S14M
S14M
S14M
S14M
S14M
S14M
S14M
S14M
1750
1778
1806
1890
1932
2002
2100
2198
2240
2310
125
126
129
135
138
143
150
157
160
165
1,750
1,778
1,806
1,890
1,932
2,002
2,100
2,198
2,240
2,310
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
840
848
856
880
896
912
920
928
944
952
105
106
107
110
112
114
115
116
118
119
840
848
856
880
896
912
920
928
944
952
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S14M
S14M
S14M
S14M
S14M
S14M
S14M
S14M
S14M
S14M
2380
2450
2506
2590
2660
2800
3150
3500
3556
3850
170
175
179
185
190
200
225
250
254
275
2,380
2,450
2,506
2,590
2,660
2,800
3,150
3,500
3,556
3,850
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
960
976
1000
1024
1040
1056
1080
1120
1128
1136
120
122
125
128
130
132
135
140
141
142
960
976
1,000
1,024
1,040
1,056
1,080
1,120
1,128
1,136
(D) B S14M
(D) B S14M
(D) B S14M
4004
4508
5012
286
322
358
4,004
4,508
5,012
(D) B S8M
(D) B S8M
B S8M
(D) B S8M
(D) B S8M
(D) B S8M
(D) B S8M
(D) B S8M
(D) B S8M
(D) B S8M
1152
1160
1184
1200
1216
1248
1256
1280
1296
1304
144
145
148
150
152
156
157
160
162
163
1,152
1,160
1,184
1,200
1,216
1,248
1,256
1,280
1,296
1,304
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1312
1320
1352
1360
1384
1400
1424
1440
1480
1488
164
165
169
170
173
175
178
180
185
186
1,312
1,320
1,352
1,360
1,384
1,400
1,424
1,440
1,480
1,488
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1520
1552
1600
1640
1648
1680
1696
1728
1760
1776
190
194
200
205
206
210
212
216
220
222
1,520
1,552
1,600
1,640
1,648
1,680
1,696
1,728
1,760
1,776
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1792
1800
1816
1832
1880
1912
1960
2000
2040
2048
224
225
227
229
235
239
245
250
255
256
1,792
1,800
1,816
1,832
1,880
1,912
1,960
2,000
2,040
2,048
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
2064
2104
2120
2160
2240
2272
2304
2400
2496
2600
258
263
265
270
280
284
288
300
312
325
2,064
2,104
2,120
2,160
2,240
2,272
2,304
2,400
2,496
2,600
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
B
B
B
B
B
B
B
B
B
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
2800
2920
2944
3048
3200
3272
3440
3680
4400
350
365
368
381
400
409
430
460
550
2,800
2,920
2,944
3,048
3,200
3,272
3,440
3,680
4,400
• Keep in mind that not all the sizes in above chart are in-stock items.
13
Super Torque®® Timing Pulley
Timing belt power transmission system works the best when
belt and pulley smoothly mesh with each other.
Our SuPER TORQuE Timing Pulley is made with specially
formed tooth shape and fine finishing.
Pulley Product Code Example:
SuPER TORQuE Standard Pulley Types and Sizes
Belt Type
No. of Teeth
Size
Standard Sizes
Type
S2M
S3M
S5M
We add aluminum as a standard pulley for S3M and S5M
S2M
S3M
Product Code
PD
PD
OD
P
P
P
P
P
14S2M
15S2M
16S2M
18S2M
20S2M
8.91
9.55
10.91
11.46
12.73
8.40
9.40
9.68
10.95
12.22
P
P
P
P
P
14S3M
15S3M
16S3M
18S3M
20S3M
13.37
14.32
15.28
17.19
19.10
12.61
13.56
14.52
16.43
18.34
P
P
P
P
P
14S5M
15S5M
16S5M
18S5M
20S5M
22.28
23.87
25.46
28.65
31.83
21.32
22.91
24.50
27.69
30.87
22
24
25
26
28
P
P
P
P
P
22S2M
24S2M
25S2M
26S2M
28S2M
14.01
15.28
15.92
16.55
17.83
13.50
14.77
15.41
16.04
17.32
P
P
P
P
P
22S3M
24S3M
25S3M
26S3M
28S3M
21.01
22.92
23.87
24.83
26.74
20.25
22.16
23.11
24.07
25.98
P
P
P
P
P
22S5M
24S5M
25S5M
26S5M
28S5M
35.01
38.20
39.79
41.38
44.56
34.05
37.24
38.83
40.42
43.60
30
32
36
40
44
P
P
P
P
P
30S2M
32S2M
36S2M
40S2M
44S2M
19.10
20.37
22.92
25.46
28.01
18.59
19.86
22.41
24.96
27.50
P
P
P
P
P
30S3M
32S3M
36S3M
40S3M
44S3M
28.65
30.56
34.38
38.20
42.02
27.89
29.80
33.62
37.44
41.25
P
P
P
P
P
30S5M
32S5M
36S5M
40S5M
44S5M
47.75
50.93
57.30
63.66
70.03
46.79
49.97
56.34
62.70
63.07
48
50
60
P 48S2M
P 50S2M
P 60S2M
30.56
31.83
38.20
30.05
31.32
37.69
P 48S3M
P 50S3M
P 60S3M
45.84
47.75
57.30
45.07
46.98
56.53
P 48S5M
P 50S5M
P 60S5M
76.39
79.58
95.49
75.43
78.62
94.53
C
Rod Shape
15mm
25mm
A •B •C
A •B
A •B •C
A •B
A •B
Rod Shape
Product Code
S5M
14
15
16
18
20
10mm
OD
Materials
Type
S2M
S3M
S5M
PD
A•B
OD
Product Code
Pulley Types
Aluminum
Aluminum Aluminum Aluminum
Aluminum/Steel
Steel
• Shape is a 100mm long round cylinder product.
• 22 teeth and below sizes of S3M are available only in rod shape and C type. Also, 24 teeth and
above sizes are available only in A or B type.
• Only steel one is available for 25mm width S5M type.
• Flange is not sold separately as a single item.
Belt Type
S8M
No. of
Teeth
Size
14
18
19
20
21
22
24
25
26
28
30
32
34
36
38
40
44
48
50
60
72
84
96
120
Product
Code
P18S8M
P19S8M
P20S8M
P21S8M
P22S8M
P24S8M
P25S8M
P26S8M
P28S8M
P30S8M
P32S8M
P34S8M
P36S8M
P38S8M
P40S8M
P44S8M
P48S8M
P50S8M
P60S8M
P72S8M
P84S8M
P96S8M
P120S8M
PD
45.84
48.38
50.93
53.48
56.02
61.12
63.66
66.21
71.30
76.39
81.49
86.58
91.67
96.77
101.86
112.05
122.23
127.32
152.79
183.35
213.90
244.46
305.58
S14M
OD
44.46
47.01
49.56
52.10
54.65
59.74
62.29
64.84
69.93
75.02
80.12
85.21
90.30
95.39
100.49
110.67
120.86
125.95
151.42
181.97
212.53
243.09
304.21
A/B Type
Standard Width
W Type
Standard Width
No. of
Teeth
28
30
32
34
36
40
42
44
48
50
56
(60)
(64)
(72)
15 • 25 •
30 • 40
15 • 25 •
30 • 40 • 60
Product
Code
P28S14M
P30S14M
P32S14M
P34S14M
P36S14M
P40S14M
P42S14M
P44S14M
P48S14M
P50S14M
P56S14M
P60S14M
P64S14M
P72S14M
PD
124.78
133.69
142.60
151.52
160.43
178.25
187.17
196.08
213.90
222.82
249.55
267.38
285.21
320.86
OD
A/B Type
B Type
W Type
Standard Width Standard Width Standard Width
121.98
130.90
139.81
148.72
157.63 40 • 60 • 80
175.46
184.37
193.29
211.11
220.02
246.76
264.59
282.41
318.06
40 • 60
40 • 60
15 • 25 • 40 • 60
25 • 40 • 60
• No of teeth in ( ) is nonstock item.
• A and B types are made from steel whereas W type is made from cast metal.
We revised the standard item lists in April, 2006.
Mega Torque®® Timing Belt G&u
Characteristics of low/high speed torque timing belt
‘MEGA TORQuE’:
1. Large transmission capacity is achievable, at about 2 times that
of SuPER TORQuE G (Rubber)
(variation subject to pulley diameter and revolution speed).
2. Compact design possible.
Compared to SuPER TORQuE G (Rubber), width is approximately 40%
smaller on average for the same pulley diameter.
3. Pulley of existing models can be used.
MEGA TORQuE Timing Belt G
Dimensions
- Tooth Shape & Product Code -
• MTS5M
• MTS8M
• MTS14M
SuPER TORQuE (S8M, S14M) pulleys can be used as per usual.
- Please contact us regarding pulley for MTS5M.
Standard Belt Sizes
MTS5M (Pitch 5mm)
Product Code
Standard Belt Width
Belt Width Code
Belt Width (mm)
100
10
150
15
250
25
Standard Belt Width
Belt Width Code
Belt Width (mm)
150
15
250
25
300
30
400
40
600
60
Standard Belt Width
Belt Width Code
Belt Width (mm)
400
40
600
60
800
80
1000
100
1200
120
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
225
230
255
260
295
300
305
320
325
340
350
360
380
390
400
425
435
440
450
475
490
500
520
525
530
545
550
560
575
590
595
600
625
640
650
665
670
675
690
695
700
710
720
725
730
740
750
No. of teeth
45
46
51
52
59
60
61
64
65
68
70
72
76
78
80
85
87
88
90
95
98
100
104
105
106
109
110
112
115
118
119
120
125
128
130
133
134
135
138
139
140
142
144
145
146
148
150
Product Code
MTS5M 765
MTS5M 780
MTS5M 800
MTS5M 810
MTS5M 830
MTS5M 845
MTS5M 850
MTS5M 870
MTS5M 890
MTS5M 900
MTS5M 950
MTS5M 1000
MTS5M 1025
MTS5M 1050
MTS5M 1055
MTS5M 1085
MTS5M 1090
MTS5M 1100
MTS5M 1105
MTS5M 1115
MTS5M 1120
MTS5M 1125
MTS5M 1135
MTS5M 1145
MTS5M 1160
MTS5M 1165
MTS5M 1195
MTS5M 1225
MTS5M 1250
MTS5M 1270
MTS5M 1295
MTS5M 1350
MTS5M 1420
MTS5M 1475
MTS5M 1500
MTS5M 1505
MTS5M 1530
MTS5M 1595
MTS5M 1605
MTS5M 1680
MTS5M 1715
MTS5M 1800
MTS5M 2000
MTS5M 2255
MTS5M 2480
MTS5M 2525
No. of teeth
153
156
160
162
166
169
170
174
178
180
190
200
205
210
211
217
218
220
221
223
224
225
227
229
232
233
239
245
250
254
259
270
284
295
300
301
306
319
321
336
343
360
400
451
496
505
15
Mega Torque®® Timing Belt G&u
Standard Belt Sizes
MTS8M (Pitch 8mm)
Product Code
MTS8M 528
MTS8M 560
MTS8M 584
MTS8M 600
MTS8M 632
MTS8M 640
MTS8M 656
MTS8M 712
MTS8M 720
MTS8M 760
MTS8M 800
MTS8M 824
MTS8M 840
MTS8M 848
MTS8M 856
MTS8M 880
MTS8M 896
MTS8M 912
MTS8M 920
MTS8M 928
MTS8M 944
MTS8M 952
MTS8M 960
MTS8M 976
MTS8M 1000
MTS8M 1024
MTS8M 1040
MTS8M 1056
MTS8M 1080
MTS8M 1120
MTS8M 1128
MTS8M 1136
MTS8M 1152
MTS8M 1160
MTS8M 1184
MTS8M 1200
MTS8M 1216
MTS8M 1248
MTS8M 1256
MTS8M 1280
MTS8M 1296
MTS8M 1304
MTS8M 1312
MTS8M 1320
MTS8M 1352
MTS8M 1360
No. of teeth
66
70
73
75
79
80
82
89
90
95
100
103
105
106
107
110
112
114
115
116
118
119
120
122
125
128
130
132
135
140
141
142
144
145
148
150
152
156
157
160
162
163
164
165
169
170
Product Code
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
1384
1400
1424
1440
1480
1488
1520
1552
1600
1640
1648
1680
1696
1728
1760
1776
1792
1800
1816
1832
1880
1912
1960
2000
2040
2048
2064
2104
2120
2160
2240
2272
2304
2400
2496
2600
2800
2920
2944
3048
3200
3272
3440
3680
4400
No. of teeth
173
175
178
180
185
186
190
194
200
205
206
210
212
216
220
222
224
225
227
229
235
239
245
250
255
256
258
263
265
270
280
284
288
300
312
325
350
365
368
381
400
409
430
460
550
MTS14M (Pitch 14mm)
Product Code
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
1008
1120
1190
1246
1288
1400
1470
1540
1610
1652
1708
1750
1778
1806
1890
1932
2002
2100
2198
2240
2310
2380
2450
2506
2590
2660
2800
3150
3500
3556
3850
4004
4508
5012
No. of teeth
72
80
85
89
92
100
105
110
115
118
122
125
127
129
135
138
143
150
157
160
165
170
175
179
185
190
200
225
250
254
275
286
322
358
• MEGA TORQuE Timing Belt u
Dimensions
Standard Belt Width
Belt Width Code
Belt Width (mm)
150
15
250
25
400
40
600
60
Standard Belt Sizes
MTS8M (Pitch 8mm)
Product Code
MTS8M 560
MTS8M 600
MTS8M 640
MTS8M 680
MTS8M 720
MTS8M 760
*MTS8M 800
MTS8M 848
MTS8M 896
MTS8M 960
MTS8M 1000
MTS8M 1056
MTS8M 1120
MTS8M 1200
MTS8M 1280
*MTS8M 1328
MTS8M 1360
MTS8M 1440
MTS8M 1520
MTS8M 1600
MTS8M 1696
*MTS8M 1792
*MTS8M 1888
No. of teeth
70
75
80
85
90
95
100
106
112
120
125
132
140
150
160
166
170
180
190
200
212
224
236
• Total thickness of belt sizes with * mark is 4.8mm.
16
H Series
Round-shape belt teeth enable the distribution of load
stress uniformly over the entire belt tooth.
Since the belt tooth engages with the pulley groove
without any interference, stress concentration at the
root of the belt tooth can be eliminated.
• High Power Transmission Capacity
Dimensions
• H8M
Standard Belt Width
• H14M
Belt Width (mm)
20.0
30.0
50.0
85.0
Belt Width Code
20
30
50
85
Standard Belt Width
Belt Width (mm)
40.0
55.0
85.0
115.0
Belt Width Code
40
55
85
115
The above mentioned shapes and figures are only for reference.
Standard Belt Sizes
Product Code
No. of teeth
H8M
Belt Pitch
Product Code
Length (mm)
No. of teeth
Belt Pitch
Length (mm)
Product Code
H14M
No. of teeth
Belt Pitch
Length (mm)
536H8M
67
536
1200H8M
150
1,200
784H14M
56
784
560H8M
70
560
1224H8M
153
1,224
826H14M
59
826
592H8M
74
592
1248H8M
156
1,248
924H14M
66
924
600H8M
75
600
1280H8M
160
1,280
966H14M
69
966
624H8M
78
624
1304H8M
163
1,304
1148H14M
82
1,148
632H8M
79
632
1320H8M
165
1,320
1190H14M
85
1,190
640H8M
80
640
1360H8M
170
1,360
1344H14M
96
1,344
656H8M
82
656
1392H8M
174
1,392
1400H14M
100
1,400
680H8M
85
680
1400H8M
175
1,400
1456H14M
104
1,456
720H8M
90
720
1424H8M
178
1,424
1512H14M
108
1,512
760H8M
95
760
1432H8M
179
1,432
1540H14M
110
1,540
776H8M
97
776
1440H8M
180
1,440
1568H14M
112
1,568
800H8M
100
800
1480H8M
185
1,480
1610H14M
115
1,610
840H8M
105
840
1520H8M
190
1,520
1638H14M
117
1,638
856H8M
107
856
1600H8M
200
1,600
1652H14M
118
1,652
880H8M
110
880
1680H8M
210
1,680
1680H14M
120
1,680
896H8M
112
898
1696H8M
212
1,696
1736H14M
124
1,736
912H8M
114
912
1728H8M
216
1,728
1778H14M
127
1,778
920H8M
115
920
1760H8M
220
1,760
1890H14M
135
1,890
936H8M
117
936
1800H8M
225
1,800
1932H14M
138
1,932
960H8M
120
960
1896H8M
237
1,896
1946H14M
139
1,946
968H8M
121
968
1904H8M
238
1,904
2002H14M
143
2,002
1000H8M
125
1,000
1936H8M
242
1,936
2100H14M
150
2,100
1040H8M
130
1,040
2000H8M
250
2,000
2198H14M
157
2,198
1056H8M
132
1,056
2080H8M
260
2,080
2310H14M
165
2,310
1064H8M
133
1,064
2104H8M
263
2,104
2450H14M
175
2,450
1080H8M
135
1,080
2160H8M
270
2,160
1120H8M
140
1,120
2240H8M
280
2,240
1128H8M
141
1,128
2272H8M
284
2,272
1152H8M
144
1,152
2400H8M
300
2,400
1160H8M
145
1,160
17
Belt Type, Dimensions & Product Code
Belt Type
MXL
(DMXL)
G
T80
Standard Width
Code
Width (mm)
4 .8
4 .8
3 .2
6 .4
9 .5
12 . 7
3 .2
4 .8
3 .2
6 .4
9 .5
4 .8
6 .4
XL
G•U
025
6.4
037
9.5
L
G•U
(DL)
G
H
(DH)
G
XH
G
XXH
G
T5
(DT5)
U
T10
(DT10)
U
9 .5
031
8 .0
9 .5
7.9
050
12.7
075
19.1
050
100
150
075
100
150
200
300
200
300
400
500
12.7
25.4
25.4
38.1
50.8
76.2
50.8
76.2
101.6
127.0
300
76.2
101.6
05
5.0
127.0
152.4
10
10.0
15
20
25
30
40
50
15.0
20.0
25.0
30.0
40.0
50.0
15
20
6
0.2
cash register, printing machine, facsimile, measurement
equipment, ticket machine, camera, paper feeder,
printer, CPU peripherals, card reader, fish sonar finder,
medical measurement equipment, radio-controlled model,
audio player, VTR, editing equipment
Printer, copier, car antenna, projector
6
0.2
Home sewing machines, line printer, medical bed,
16
0.75
36
3.7
electrical shaver, auto door, copier, massage machine,
editing machine, ticket machine, mower, food processor,
calculator, fish sonar finder, blood pump, home meat slicer
Vending machine, wiper, packing machine, quenching
machine, lift, ice crusher, industrial drier, automated golf
cart, computer, copier, plastic lens polishing machine, food
processing machine, seaweed collector
Small milling machine, mower, power generator
57
37
15.0
20.0
compressor, scrap chopper, hole finishing machine, drilling
machine, glass making machine, food processing
machines, rope coiler, roller coater, mill roll, woodworking
machinery
Saw mill, cutting machine, cutter, mixer, pump, welder,
127
75
50.8
400
600
Home sewing machines, typewriters, ATM, coin changer,
19.1
152.4
500
Applications
Maximum
Transmission
Power(kW)
38.1
600
200
Minimum
Pulley
Diameter (mm)
3 .2
U
8 .0
Product Code
12 . 7
6 .4
(DXL)
G
18
Standard Dimensions
centrifuge, drilling machine, oscillating mill, lathe, wool
loom, paper manufacturing machine, textile machine
Blower, high pressure pump, change gear, rod mill,
compressor, NC lathe, vibrator, mixer, abrasive boring
182
150
machine
Data writer, facsimile, sewing machine
19
0.75
Packaging machine, card reader, textile machine, paper
45
3.7
manufacturing machine, NC lathe, conveyor
• G: Rubber Timing Belt • U: Polyurethane Timing Belt
(Note)
1. Maximum transmission power varies depending on belt width and operatiing speed with the same belt.
The values in above table are for your reference. Please use correct values from relevant design catalog when you design.
2. For G (rubber) type, use heat resistance or oil resistance specifications when the belts are used in temperatures (up to 120 0 C) or
where oil may contaminate the belts.
Timing Belt G
This synchronous transmission belt eliminates the problems
of chains and gears.
Extra small pitch type fits well for precision equipment and
IT systems.
• Thin, lightweight and superior flexibility of this belt allows compact
design application.
• It enables efficient high speed power transmission.
• Low noise operation compared to chain/gear use.
• Cost-Efficient.
Standard Belt Sizes
Belt Type
Tooth Pitch
Code (width)
Product
Code
Size
MXL
2.032(mm)
3.2(3.2mm) 4.8(4.8mm) 6.4(6.4mm) 9.5(9.5mm) 12.7 (12.7mm)
No. of
Teeth
Product
Code
Belt Pitch
Length (mm)
No. of Belt Pitch
Teeth Length (mm)
Product
Code
222
224
226
227
228
230
232
236
239
240
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
No. of
Teeth
Belt Pitch
Length (mm)
222
224
226
227
228
230
232
236
239
240
451.09
455.17
459.23
461.26
463.30
467.36
471.42
479.55
485.65
487.68
34
35
40
41
45
46
48
49
50
51
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
34
35
40
41
45
46
48
49
50
51
69.09
71.12
81.28
83.31
91.44
93.47
97.54
99.57
101.60
103.63
109
110
112
114
115
118
119
120
121
122
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
109
110
112
114
115
118
119
120
121
122
221.09
223.52
227.58
231.65
233.68
239.78
241.81
243.84
245.87
247.90
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
52
53
54
55
56
57
59
60
61
63
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
52
53
54
55
56
57
59
60
61
63
105.66
107.70
109.73
111.76
113.79
115.82
119.89
112.92
123.95
128.02
123
125
126
127
128
129
130
131
132
134
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
123
125
126
127
128
129
130
131
132
133
249.94
254.00
256.03
258.06
260.10
262.13
264.16
266.22
268.22
272.29
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
243
245
248
250
256
260
262
265
270
273
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
243
245
248
250
256
260
262
265
270
273
493.78
479.84
503.94
508.00
520.19
528.32
532.38
538.48
548.64
554.74
65
66
67
68
70
71
72
73
74
75
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
65
66
67
68
70
71
72
73
74
75
132.08
134.11
136.14
138.18
142.24
144.27
146.30
148.34
150.37
152.40
135 MXL
138 MXL
140 MXL
142 MXL
144 MXL
(D) 145 MXL
(D) 146 MXL
(D) 147 MXL
(D) 148 MXL
(D) 150 MXL
135
138
140
142
144
145
146
147
148
150
274.32
280.42
284.48
288.54
292.61
294.64
296.67
298.70
300.74
304.80
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
275
278
280
281
285
288
290
295
297
300
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
275
278
280
281
285
288
290
295
297
300
558.80
564.90
568.96
570.99
579.12
585.22
589.28
599.44
603.50
609.60
76
77
78
79
80
81
82
83
85
86
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
76
77
78
79
80
81
82
83
85
86
154.43
156.46
158.50
160.53
162.56
164.59
166.62
168.66
172.72
174.75
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
152
154
155
156
158
160
162
165
170
171
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
152
154
155
156
158
160
162
165
170
171
308.86
312.93
314.96
316.99
321.06
325.12
329.18
335.28
345.44
347.47
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
302
305
310
312
315
318
320
324
330
332
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
302
305
310
312
315
318
320
324
330
332
613.66
619.76
629.92
633.98
640.08
646.18
650.24
658.37
670.56
674.62
87 MXL
88 MXL
89 MXL
90 MXL
91 MXL
92 MXL
93MXL
94 MXL
95 MXL
96 MXL
87
88
89
90
91
92
93
94
95
96
176.78
178.82
180.85
182.88
184.91
186.94
188.98
194.04
193.04
195.07
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
175
180
184
185
186
187
188
190
192
194
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
175
180
184
185
186
187
188
190
192
194
355.60
365.76
373.89
375.92
377.95
379.98
382.02
386.08
390.14
394.21
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
334
336
337
338
339
347
348
350
355
359
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
334
336
337
338
339
347
348
350
355
359
678.69
682.75
684.78
686.82
688.85
705.10
707.14
711.20
721.36
729.49
97 MXL
98 MXL
99 MXL
100 MXL
101 MXL
102 MXL
103 MXL
105 MXL
106 MXL
108 MXL
97
98
99
100
101
102
103
105
106
108
197.10
199.14
201.17
203.20
205.23
207.26
209.30
213.36
215.39
219.46
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
195
198
200
203
205
210
212
219
220
221
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
195
198
200
203
205
210
212
219
220
221
396.24
402.34
406.40
412.50
416.56
426.72
430.78
445.01
447.04
449.07
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
364
365
367
372
380
386
397
400
405
411
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
364
365
367
372
380
386
397
400
405
411
739.65
741.68
745.74
755.90
772.16
784.35
806.70
812.80
822.96
835.15
Product
Code
No. of
Teeth
Belt Pitch
Length (mm)
415
419
420
424
435
436
438
448
453
464
843.28
851.41
853.44
861.57
883.92
885.95
890.02
910.34
920.50
942.85
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
475
478
487
498
500
503
507
515
516
520
965.20
971.30
989.58
1011.94
1016.00
1022.10
1030.22
1046.48
1048.51
1056.64
525 MXL
535 MXL
537 MXL
550 MXL
569 MXL
591 MXL
650 MXL
705 MXL
772 MXL
1369 MXL
525
535
537
550
569
591
650
705
772
1369
1066.80
1087.12
1091.18
1117.60
1156.21
1200.91
1320.80
1432.56
1568.70
2781.81
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
415
419
420
424
435
436
438
448
453
464
475
478
487
498
500
503
507
515
516
520
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
• This belt is usually made-to-order, however, please check with us for stock when you order.
• (D) signifies standard size of double timing belt G (rubber) type.
19
23
Timing Belt G
This synchronous transmission belt eliminates the problems
of chains and gears.
Extra small pitch type fits well for precision equipment and
IT systems.
• Thin, lightweight and superior flexibility of this belt allows compact design application.
• It enables efficient high speed power transmission.
• Low noise operation compared to chain/gear.
• Maintenance-free.
• Standard belt can be used in the temperature range between -220F and +1940F, and it is also
conductive.
Standard Belt Sizes
Belt Type
Tooth Pitch
Code (Width)
XL
5.08 (mm)
025(6.4mm) 031(7.9mm) 037(9.5mm) 050(12.7mm)
Product
No. of Belt Pitch
Product
No. of Belt Pitch
Code
Teeth Length(mm)
Code
Teeth Length(mm)
30
32
34
35
37
38
39
40
41
42
152.40
162.56
172.72
177.80
187.96
193.04
198.12
203.20
208.28
213.36
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
210
212
216
218
220
228
230
234
236
240
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
105
106
108
109
110
114
115
117
118
120
533.40
538.48
548.48
553.72
558.80
579.12
584.20
594.36
599.44
609.60
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
109
124
135
150
165
173
180
187
210
217
L
L
L
L
L
L
L
L
L
L
29
33
36
40
44
46
48
50
56
58
276.23
314.33
342.90
381.00
419.10
438.15
457.20
476.25
533.40
552.45
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
86 XL
88 XL
90 XL
92 XL
94 XL
96 XL
98 XL
100 XL
102 XL
104 XL
43
44
45
46
47
48
49
50
51
52
218.44
223.52
228.60
233.68
238.76
243.84
248.92
254.00
259.08
264.16
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
250XL
254 XL
260 XL
270 XL
276 XL
280 XL
282 XL
290 XL
300 XL
310 XL
125
127
130
135
138
140
141
145
150
155
635.00
645.16
660.40
685.80
701.04
711.20
716.28
736.60
762.00
787.40
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
225
232
240
255
265
270
277
285
300
315
L
L
L
L
L
L
L
L
L
L
60
62
64
68
71
72
74
76
80
84
571.50
590.55
609.60
647.70
676.28
685.80
704.85
723.90
762.00
800.10
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
106
108
110
112
114
116
118
120
122
124
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
53
54
55
56
57
58
59
60
61
62
269.24
274.32
279.40
284.48
289.56
294.64
299.72
304.80
309.88
314.96
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
314
320
330
332
340
348
352
360
364
370
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
157
160
165
166
170
174
176
180
182
185
797.56
812.80
838.20
843.28
863.60
883.92
894.08
914.40
924.56
939.80
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
320
322
334
337
345
360
367
375
382
390
L
L
L
L
L
L
L
L
L
L
85
86
89
90
92
96
98
100
102
104
809.63
819.15
847.73
857.25
876.30
914.40
933.45
952.50
971.55
990.60
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
126
128
130
134
136
138
140
142
144
146
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
63
64
65
67
68
69
70
71
72
73
320.04
325.12
330.20
340.36
345.44
350.52
355.60
360.68
365.76
370.84
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
148
150
152
154
156
158
160
162
164
166
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
74
75
76
77
78
79
80
81
82
83
375.92
381.00
386.08
391.16
396.24
401.32
406.40
411.48
416.56
421.64
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
376
380
384
388
390
396
414
424
450
460
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
188
190
192
194
195
198
207
212
225
230
955.04
965.20
975.36
985.52
990.60
1005.84
1051.56
1076.96
1143.00
1168.40
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
394
398
420
427
435
450
454
480
510
525
L
L
L
L
L
L
L
L
L
L
105
106
112
114
116
120
121
128
136
140
1000.13
1009.65
1066.80
1085.85
1104.90
1143.00
1152.53
1219.20
1295.40
1333.50
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
168
170
172
174
176
178
180
182
184
186
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
84
85
86
87
88
89
90
91
92
93
426.72
431.80
436.88
441.96
447.04
452.12
457.20
462.28
467.36
472.44
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
478
480
490
522
532
540
552
564
592
600
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
239
240
245
261
266
270
276
282
296
300
1214.12
1219.20
1244.60
1325.88
1351.28
1371.60
1402.08
1432.56
1503.68
1524.00
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
540
548
581
600
630
653
660
697
731
934
L
L
L
L
L
L
L
L
L
L
144
146
155
160
168
174
176
186
195
249
1371.60
1390.65
1476.38
1524.00
1600.20
1657.35
1676.40
1771.65
1857.37
2371.72
(D)
(D)
(D)
(D)
(D)
(D)
(D)
616
630
670
754
828
860
XL
XL
XL
XL
XL
XL
308
315
335
377
414
430
1564.64
1600.20
1701.80
1915.16
2013.12
2184.40
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
188
190
192
194
196
198
200
202
204
206
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
94
95
96
97
98
99
100
101
102
103
477.52
482.60
487.68
492.76
497.84
502.92
508.00
513.08
518.16
523.24
60
64
68
70
74
76
78
80
82
84
(D) signifies the standard size of double timing belt G type.
20
No. of Belt Pitch
Teeth Length(mm)
050(12.7mm) 075(19.1mm) 100(25.4mm) 150(38.1mm)
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
Size
Product
Code
L
9.525(mm)
Product
Code
H
12.7(mm)
No. of Belt Pitch
Teeth Length(mm)
075(19.1mm) 100(25,4mm) 150(38.1mm) 200(50.8mm) 300(76.2mm)
(D) 225 H
(D) 230 H
(D) 240 H
(D) 245 H
(D) 255 H
(D) 270 H
(D) 280 H
(D) 300 H
(D) 310 H
(D) 315 H
(D) 320 H
(D) 330 H
(D) 340 H
(D) 350 H
(D) 360 H
(D) 370 H
(D) 375 H
(D) 390 H
(D) 400 H
(D) 410 H
(D) 420 H
(D) 430 H
(D) 450 H
(D) 465 H
(D) 480 H
(D) 490 H
(D) 510 H
(D) 530 H
(D) 540 H
(D) 560 H
(D) 570 H
(D) 580 H
(D) 600 H
(D) 605 H
(D) 625 H
(D) 630 H
(D) 640 H
(D) 650 H
(D) 660 H
(D) 680 H
(D) 700 H
(D) 730 H
(D) 750 H
(D) 770 H
(D) 800 H
(D) 810 H
(D) 840 H
(D) 850 H
(D) 860 H
(D) 880 H
(D) 900 H
(D) 950 H
(D) 1000 H
(D) 1020 H
(D) 1100 H
(D) 1120 H
(D) 1130 H
(D) 1140 H
(D) 1150 H
(D) 1160 H
(D) 1250 H
(D) 1285 H
(D) 1325 H
(D) 1345 H
(D) 1350 H
(D) 1360 H
(D) 1400 H
(D) 1700 H
(D) 1765 H
45
46
48
49
51
54
56
60
62
63
64
66
68
70
72
74
75
78
80
82
84
86
90
93
96
98
102
106
108
112
114
116
120
121
125
126
128
130
132
136
140
146
150
154
160
162
168
170
172
176
180
190
200
204
220
224
226
228
230
232
250
257
265
269
270
272
280
340
353
571.50
584.20
609.60
622.30
647.70
685.80
711.20
762.00
787.40
800.10
812.80
838.20
863.60
889.00
914.40
939.80
952.50
990.60
1016.00
1041.40
1066.80
1092.20
1143.00
1181.10
1219.20
1244.60
1295.40
1346.20
1371.60
1422.40
1447.80
1473.20
1524.00
1536.70
1587.50
1600.20
1625.60
1651.00
1676.40
1727.20
1778.00
1854.20
1905.00
1955.80
2032.00
2057.40
2133.60
2159.00
2184.40
2235.20
2286.00
2413.00
2540.00
2590.00
2794.00
2844.80
2870.20
2895.60
2921.00
2946.00
3175.00
3263.90
3365.50
3416.30
3429.00
3454.40
3556.00
4318.00
4483.10
Timing Belt G
Standard Belt Sizes
Belt Type
Tooth Pitch
Code (Width)
XH
22.225 (mm)
200(50.8mm) 300(76.2mm) 400(101.6mm)
500(127.0mm) 600(152.4mm)
Product
Code
(D463 XH
( 507 XH
(D560 XH
(D630 XH
(D700 XH
Size
XXH
31.750 (mm)
No. of
Belt Pitch
Teeth Length(mm)
Product
Code
No. of Belt Pitch
Teeth Length(mm)
53
58
64
72
80
1177.93
1289.05
1422.40
1600.20
1778.00
(D700 XXH
( 800 XXH
(D900 XXH
( 1000 XXH
1200 XXH
56
64
72
80
96
1778.00
2032.00
2286.00
2540.00
3048.00
( 1400 XXH
( 1600 XXH
( 1800 XXH
(
112
128
144
3556.00
4064.00
4572.00
735
770
840
927
980
XH
XH
XH
XH
XH
84
88
96
106
112
1866.90
1955.80
2133.60
2355.85
2489.20
1120
1260
1400
1540
1750
XH
XH
XH
XH
XH
128
144
160
176
200
2844.80
3200.40
3556.00
3911.60
4445.00
(
(
(
(
(
200(50.8mm) 300(76.2mm) 400(101.6mm)
500(127.0mm) 600(152.4mm)
21
Timing Belt u
With its high abrasion resistance and lesser rubber dust
dispersion, polyurethane timing belts are suitable for use in
places where clean environments are required.
• The best for light-duty transmission which requires high precision.
• Suitable for paper feeding use because it does not contaminate contact subject.
• Smooth and quiet operation as it is flexible to fit well in small diameter pulleys.
• Made-to-order system enables manufacture of special form orders.
Standard Belt Sizes
Belt Type
Tooth Pitch
Code (Width)
Size
Product
Code
Product
Code
No. of Belt Pitch
Teeth Length(mm)
T80
2.032 (mm)
3.2(3.2mm) 4.8(4.8mm) 6.4(6.4mm) 9.5(9.5mm)
No. of Belt Pitch
No. of Belt Pitch
Product
Teeth Length(mm)
Teeth Length(mm)
Code
No. of Belt Pitch
Teeth Length(mm)
(D
(
(D
(D
(D
104 T80
105 T80
106 T80
108 T80
110 T80
104
105
106
108
110
211.33
213.36
215.39
219.46
223.52
(D
(
(D
(D
(D
221 T80
224 T80
225 T80
228 T80
230 T80
221
224
225
228
230
449.07
455.17
457.20
463.30
467.36
(D
(
(D
(D
(D
360 T80
370 T80
380 T80
390 T80
397 T80
360
370
380
390
397
731.52
751.84
772.16
792.48
806.70
(
(
(
(
(
112 T80
114 T80
115 T80
118 T80
120 T80
112
114
115
118
120
227.58
231.65
233.68
239.78
243.84
(
(
(
(
(
231 T80
232 T80
235 T80
236 T80
239 T80
231
232
235
236
239
469.39
471.42
477.52
479.55
485.65
(
(
(
(
(
400 T80
403 T80
420 T80
430 T80
434 T80
400
403
420
430
434
812.80
818.90
853.44
873.76
881.89
121 T80
122 T80
123 T80
124 T80
125 T80
121
122
123
124
125
245.87
247.90
249.94
251.97
254.00
240 T80
245 T80
248 T80
249 T80
250 T80
240
245
248
249
250
487.68
497.84
503.94
505.97
508.00
442 T80
474 T80
500 T80
515 T80
550 T80
442
474
500
515
550
898.14
963.17
1016.00
1046.48
1117.60
(
(
(
(
(
126 T80
130 T80
132 T80
135 T80
140 T80
126
130
132
135
140
256.03
264.16
268.22
274.32
284.48
(
(
(
(
(
255 T80
256 T80
260 T80
262 T80
265 T80
255
256
260
262
265
518.16
520.19
528.32
532.38
538.48
144.27
146.30
148.34
150.37
152.40
(
(
(
(
(
142 T80
144 T80
145 T80
148 T80
150 T80
142
144
145
148
150
288.54
292.61
294.64
300.74
304.80
(
(
(
(
(
270 T80
275 T80
277 T80
279 T80
280 T80
270
275
277
279
280
548.64
558.80
562.86
566.93
568.96
77
78
80
81
82
156.46
158.50
162.56
164.59
166.62
(
(
(
(
(
155 T80
156 T80
157 T80
160 T80
165 T80
155
156
157
160
165
314.96
316.99
319.02
325.12
335.28
(
(
(
(
(
285 T80
288 T80
290 T80
295 T80
296 T80
285
288
290
295
296
579.12
585.22
589.28
599.44
609.60
83 T80
85 T80
87 T80
88 T80
89 T80
83
85
87
88
89
168.66
172.72
176.78
178.82
180.85
(
(
(
(
(
170 T80
175 T80
180 T80
184 T80
185 T80
170
175
180
184
185
345.44
355.60
365.76
373.89
375.92
(
(
(
(
(
300 T80
304 T80
310 T80
312 T80
315 T80
300
304
310
312
315
601.47
617.73
629.92
633.98
640.08
90 T80
91 T80
93 T80
94 T80
95 T80
90
91
93
94
95
182.88
184.91
188.98
191.04
193.04
(
(
(
(
(
190 T80
195 T80
200 T80
205 T80
208 T80
190
195
200
205
208
386.08
396.24
406.40
416.56
422.66
(
(
(
(
(
318 T80
320 T80
324 T80
330 T80
336 T80
318
320
324
330
336
646.18
650.24
658.37
670.56
682.75
( 97 T80
( 98 T80
( 100 T80
( 102 T80
(
103 T80
97
98
100
102
103
197.10
199.14
203.20
207.26
209.30
(
(
(
(
210 T80
212 T80
215 T80
219 T80
220 T80
210
212
215
219
220
426.72
430.78
436.88
445.01
447.04
(
(
(
(
340 T80
344 T80
350 T80
355 T80
358 T80
340
344
350
355
358
690.88
699.01
711.20
721.36
727.46
(D
(
(D
(D
(D
30 T80
35 T80
40 T80
45 T80
46 T80
30
35
40
45
46
60.96
71.12
81.28
91.44
93.47
(
(
(
(
(
48 T80
50 T80
52 T80
53 T80
54 T80
48
50
52
53
54
97.54
101.60
105.66
107.70
109.73
55 T80
56 T80
57 T80
59 T80
60 T80
55
56
57
59
60
111.76
113.79
115.82
119.89
121.92
(
(
(
(
(
63 T80
65 T80
67 T80
68 T80
70 T80
63
65
67
68
70
128.02
132.08
136.14
138.18
142.24
(
(
(
(
(
71 T80
72 T80
73 T80
74 T80
75 T80
71
72
73
74
75
(
(
(
(
(
77 T80
78 T80
80 T80
81 T80
82 T80
(
(
(
(
(
(
(
(
(
(
(
(
• This type is usually made-to-order. However, please check for stock availability when placing order.
22
Product
Code
Timing Belt u
Standard Belt Sizes
Belt Type
Tooth Pitch
Code (Width)
Product
Code
(D
(
(D
(D
(D
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
Size
No. of
Teeth
Belt Pitch
Length(mm)
XL
5.08 (mm)
No. of
Teeth
L
9.525 (mm)
Product
Code
Belt Pitch
Length(mm)
60 XL
64 XL
66 XL
70 XL
76 XL
30
32
33
35
38
39
40
42
45
47
48
50
51
52
53
54
55
57
58
60
62
63
64
65
68
70
71
73
74
75
76
77
80
83
84
85
88
90
93
95
78 XL
80 XL
84 XL
90 XL
94 XL
96 XL
100 XL
102 XL
104 XL
106 XL
108 XL
110 XL
114 XL
116 XL
120 XL
124 XL
126 XL
128 XL
130 XL
136 XL
140 XL
142 XL
146 XL
148 XL
150 XL
152 XL
154 XL
160 XL
166 XL
168 XL
170 XL
176 XL
180 XL
186 XL
190 XL
152.40
162.56
167.64
177.80
193.04
(D
(
(D
(D
(D
198.12
203.20
213.36
228.60
238.76
243.84
254.00
259.08
264.16
269.24
274.32
279.40
289.56
294.64
304.80
314.96
320.04
325.12
330.20
345.44
355.60
360.68
370.84
375.92
381.00
386.08
391.16
406.40
421.64
426.72
431.80
447.04
457.20
472.44
482.60
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
200 XL
210 XL
212 XL
220 XL
224 XL
230 XL
240 XL
250 XL
254 XL
260 XL
270 XL
290 XL
300 XL
320 XL
330 XL
340 XL
348 XL
352 XL
360 XL
376 XL
384 XL
390 XL
396 XL
414 XL
460 XL
480
512
544
550
564
630
670
842
T5(DT5)
5.0 (mm)
05(5.0mm) 10(10.0mm) 15(15mm) 20(20.0mm)
No. of
Teeth
No. of Belt Pitch
Teeth Length(mm)
025(6.4mm) 031(7.9mm) 037(9.5mm) 050(12.7mm)
Belt Pitch
Length(mm)
33
37
40
43
44
165
185
200
215
220
71
72
73
75
78
355
360
365
375
390
45
49
50
51
52
225
245
250
255
260
(D) 80
(D) 82
84
85
88
400
410
420
425
440
54
55
56
59
(D) 60
270
275
280
295
300
89
(D) 90
91
(D) 92
95
445
450
455
460
475
61
65
66
68
(D) 70
305
325
330
340
350
(D) 96
(D)100
102
105
109
480
500
510
525
545
(D)110
550
(D) signifies double timing belt.
No. of
Teeth
Belt Pitch
Length(mm)
100
105
106
110
112
115
120
125
127
130
135
145
150
160
165
170
174
176
180
188
192
195
198
207
230
240
256
272
275
282
315
335
421
XL
XL
XL
XL
XL
XL
XL
XL
No. of
Teeth
508.00
533.40
538.48
558.80
568.96
584.20
609.60
635.00
645.16
660.40
685.80
736.60
762.00
812.80
838.20
863.60
883.92
894.08
914.40
955.04
975.36
990.60
1005.84
1051.56
1168.40
(D
(
(D
(D
(D
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
1219.20
1300.48
1381.76
1397.00
1432.56
1600.20
1701.80
2138.68
Belt Pitch
Length(mm)
Product
Code
No. of
Teeth
No. of
Teeth
Belt Pitch
Length(mm)
050(12.7mm) 075(19.1mm) 100(25.4mm) 150 (38.1mm)
124 L
150 L
165 L
173 L
187 L
33
40
44
46
50
56
60
64
68
72
76
80
81
86
92
98
100
104
112
114
120
128
136
140
144
160
210 L
225 L
240 L
255 L
270 L
285 L
300 L
304 L
322 L
345 L
367 L
375 L
390 L
420 L
427 L
450 L
480 L
510 L
525 L
540 L
600 L
Belt Pitch
Length(mm)
No. of
Teeth
314.33
381.00
419.10
438.15
476.25
533.40
571.50
609.60
647.70
685.80
723.90
762.00
771.53
819.15
876.30
933.45
952.50
990.60
1066.80
1085.85
1143.00
1219.20
1295.40
1333.50
1371.60
1524.00
T10(DT10)
10.0 (mm)
40(40.0mm) 50(50.0mm)
Belt Pitch
Length(mm)
No. of
Teeth
Belt Pitch
Length(mm)
No. of
Teeth
Belt Pitch
Length(mm)
112
115
(D) 118
(D) 120
122
560
575
590
600
610
(D)
(D)
(D)
(D)
170
172
180
188
195
850
860
900
940
975
37
40
41
44
45
370
400
410
440
450
81
(D) 84
85
88
89
810
840
850
880
890
115
(D)120
(D)121
(D)124
(D)125
1150
1200
1210
1240
1250
178
(D)180
(D)188
196
216
1780
1800
1880
1960
2160
(D) 124
125
126
(D) 130
132
620
625
630
650
660
198
200
215
218
(D) 220
990
1000
1075
1090
1100
50
(D) 53
55
56
(D) 60
500
530
550
560
600
(D) 90
91
92
94
95
900
910
920
940
950
(D)130
(D)132
(D)135
138
139
1300
1320
1350
1380
1390
220
221
225
2200
2210
2250
135
138
(D) 140
144
145
675
690
700
720
725
223
(D) 228
243
270
276
1115
1140
1215
1350
1380
61
(D) 63
65
(D) 66
69
610
630
650
660
690
96
97
(D) 98
(D)100
101
960
970
980
1000
1010
(D)140
(D)142
145
146
(D)150
1400
1420
1450
1460
1500
(D) 150
156
(D) 160
163
168
750
780
800
815
840
288
1440
(D) 70
(D) 72
(D) 75
78
(D) 80
700
720
750
780
800
105
108
(D) 110
111
114
1050
1080
1100
1110
1140
156
(D)160
(D)161
(D)170
175
1560
1600
1610
1700
1750
23
Timing Pulley
Timing belt power transmission systems work the best when
high accuracy belts and precisely processed pulleys smoothly
mesh with each other.
• Cutting with hob cutter enables good power transmission.
• MBL accepts your request for material, form and processing method.
Standard Pulley Types & Sizes
Belt Type
No. of Teeth
PD (mm)
MXL-Rod Shape
OD (mm)
Product Code
Length
(mm)
Material
XL
No. of
Teeth
Pulley
Type
OD
(mm)
Product
Code
No. of
Teeth
10
12
13
14
15
16
17
18
19
20
6.47
7.76
8.41
9.06
9.70
10.35
11.00
11.64
12.29
12.94
5.96
7.25
7.90
8.55
9.19
9.84
10.49
11.13
11.78
12.43
P
P
P
P
P
P
P
P
P
P
10
12
13
14
15
16
17
18
19
20
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
100
100
100
100
100
100
100
100
100
100
10
11
12
14
15
16
18
19
20
21
C
C
C
C
C
B
B
B
B
B
15.66
17.28
18.90
22.13
23.75
25.36
28.60
30.22
31.83
33.45
10XL037
11XL037
12XL037
14XL037
15XL037
16XL037
18XL037
19XL037
20XL037
21XL037
30
32
34
36
38
40
42
44
48
50
21
22
23
24
25
26
27
28
30
32
13.58
14.23
14.88
15.52
16.17
16.82
17.46
18.11
19.40
20.70
13.07
13.72
14.37
15.02
15.66
16.31
16.96
17.60
18.90
20.19
P
P
P
P
P
P
P
P
P
P
21
22
23
24
25
26
27
28
30
32
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
100
100
100
100
100
100
100
100
100
100
22
24
25
26
28
B
B
B
B
B
35.07
38.30
39.92
41.53
44.77
22XL037
24XL037
25XL037
26XL037
28XL037
60
72
34
36
38
40
42
44
48
50
52
54
21.99
23.99
24.58
25.87
27.17
28.46
31.05
32.34
33.63
34.93
21.48
22.78
24.07
25.36
26.66
27.95
30.54
31.83
33.13
34.42
P
P
P
P
P
P
P
P
P
P
34
36
38
40
42
44
48
50
52
54
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
100
100
100
100
100
100
100
100
100
100
56
60
64
70
72
80
84
96
100
120
36.22
38.81
41.40
45.28
46.57
51.74
54.33
62.09
64.68
77.62
35.71
38.30
40.89
44.77
46.06
51.24
53.82
61.59
64.17
77.11
P 56 MXL
P 60 MXL
P 64 MXL
P 70 MXL
P 72 MXL
P 80 MXL
P 84 MXL
P 96 MXL
P100MXL
P120MXL
100
100
100
100
100
100
100
100
100
100
100
HighStrength
Aluminum
Alloy
• For MXL standard pulley, we stock in rod shape.
Belt Type
No. of Teeth
24
Belt Type
Pulley Type
20
21
22
23
24
25
26
27
28
30
B
B
B
B
B
B
B
B
B
B
32
36
40
48
60
72
84
96
120
B
B
B
B
B
B
B
B
B
MXL for Belt Width - 6.4mm
Material
HighStrength
Aluminum
Alloy
PD (mm)
OD (mm)
Product Code
12.94
13.58
14.23
14.88
15.52
16.17
16.82
17.46
18.11
19.40
12.43
13.07
13.72
14.37
15.02
15.66
16.31
16.96
17.60
18.90
P
P
P
P
P
P
P
P
P
P
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
20.70
23.29
25.87
31.05
38.81
46.57
54.33
62.09
77.62
20.19
22.78
25.36
30.54
38.30
46.06
53.82
61.59
77.11
P 32 MXL
P 36 MXL
P 40 MXL
P 48 MXL
P 60 MXL
P 72 MXL
P 84 MXL
P 96 MXL
P120MXL
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
20
21
22
23
24
25
26
27
28
30
Material: steel
Belt Type
No. of
Teeth
Pulley
Type
Pulley
Type
A
A
A
A
A
A
A
B
•B
•B
•B
•B
•B
•B
•B
W
W
W
W
OD
(mm)
Product
Code
48.00
51.24
54.47
57.70
60.94
64.17
67.41
70.64
77.11
80.34
30XL037
32XL037
34XL037
36XL037
38XL037
40XL037
42XL037
44XL037
48XL037
50XL037
96.51
115.92
60XL037
72XL037
L
OD
(mm)
Product Code
10
12
14
15
16
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
29.56
35.62
41.68
44.72
47.75
10
12
14
15
16
L
L
L
L
L
050
050
050
050
050
12
14
15
16
L
L
L
L
075
075
075
075
14 L 100
15 L 100
16 L 100
17
18
19
20
21
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
50.78
53.81
56.84
59.88
62.91
17
18
19
20
21
L
L
L
L
L
050
050
050
050
050
17
18
19
20
21
L
L
L
L
L
075
075
075
075
075
17
18
19
20
21
L
L
L
L
L
100
100
100
100
100
22
24
25
26
28
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
65.94
72.00
75.04
78.07
84.13
22
24
25
26
28
L
L
L
L
L
050
050
050
050
050
22
24
25
26
28
L
L
L
L
L
075
075
075
075
075
22
24
25
26
28
L
L
L
L
L
100
100
100
100
100
30
32
34
36
38
A
A
A
A
A
•
•
•
•
•
B
90.20
B
96.26
B 102.33
B 108.39
B 114.45
30
32
34
36
38
L
L
L
L
L
050
050
050
050
050
30
32
34
36
38
L
L
L
L
L
075
075
075
075
075
30
32
34
36
38
L
L
L
L
L
100
100
100
100
100
40
44
48
50
60
A•B
A•B
W
W
W
120.51
132.64
144.77
150.83
181.15
40
44
48
50
60
L
L
L
L
L
050
050
050
050
050
40
44
48
50
60
L
L
L
L
L
075
075
075
075
075
40
44
48
50
60
L
L
L
L
L
100
100
100
100
100
72
W
217.53
72 L 050
Material: steel
72 L 075
72 L 100
Timing Pulley
Pulley Product Code
(Example)
Pulley Type Form
No. of Teeth
Belt Width (inch x 100)
(Note: belt width is in mm for MXL type)
Belt Type
A Type
Add “P” in front of the product code fo MXL type (Ex) P26MXL6.4B)
B Type
C Type
W Type
Tooth profile for standard pulleys is in-volute shape complying with ISO
standards.
Standard Pulley Types & Sizes
Belt Type
No. of
Teeth
Pulley
Type
OD
(mm)
H
Belt Type
No. of
Teeth
Product Code
OD
(mm)
T5
Product Code
C
C
C
B
B
18.25
21.45
23.05
24.60
27.80
PT5-10-12
PT5-10-14
PT5-10-15
PT5-10-16
PT5-10-18
20
22
24
25
26
B
B
B
B
B
31.00
34.25
37.40
39.00
40.60
PT5-10-20
PT5-10-22
PT5-10-24
PT5-10-25
PT5-10-26
26H200
28H200
30H200
32H200
34H200
28
30
32
36
40
B
B
A•B
A•B
A•B
43.75
46.95
50.10
56.45
62.85
PT5-10-28
PT5-10-30
PT5-10-32
PT5-10-36
PT5-10-40
36H150
40H150
44H150
48H150
50H150
36H200
40H200
44H200
48H200
50H200
44
48
50
60
W
W
W
W
69.20
75.55
78.75
94.65
PT5-10-44
PT5-10-48
PT5-10-50
PT5-10-60
60H150
72H150
60H200
72H200
14
15
16
18
19
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
55.22
59.27
63.31
71.39
75.44
14H100
15H100
16H100
18H100
19H100
14H150
15H150
16H150
18H150
19H150
14H200
15H200
16H200
18H200
19H200
12
14
15
16
18
20
21
22
24
25
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
79.48
83.52
87.56
95.65
99.69
20H100
21H100
22H100
24H100
25H100
20H150
21H150
22H150
24H150
25H150
20H200
21H200
22H200
24H200
25H200
26
28
30
32
34
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
103.73
111.82
119.90
127.99
136.07
26H100
28H100
30H100
32H100
34H100
26H150
28H150
30H150
32H150
34H150
36
40
44
48
50
A•B
A•B
W
W
W
144.16
160.33
176.50
192.67
200.75
36H100
40H100
44H100
48H100
50H100
60
72
W
W
241.18
289.69
60H100
72H100
Material: steel
Pulley
Type
Material: steel
Belt Type
Pulley
Type
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
36.35
42.70
45.90
49.05
55.45
PT10-15-12
PT10-15-14
PT10-15-15
PT10-15-16
PT10-15-18
PT10-25-12
PT10-25-14
PT10-25-15
PT10-25-16
PT10-25-18
20
22
24
25
26
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
61.80
68.15
74.55
77.70
80.90
PT10-15-20
PT10-15-22
PT10-15-24
PT10-15-25
PT10-15-26
PT10-25-20
PT10-25-22
PT10-25-24
PT10-25-25
PT10-25-26
28
30
32
36
40
A
A
A
A
A
•
•
•
•
•
B
B
B
B
B
87.25
93.65
100.00
112.75
125.45
PT10-15-28
PT10-15-30
PT10-15-32
PT10-15-36
PT10-15-40
PT10-25-28
PT10-25-30
PT10-25-32
PT10-25-36
PT10-25-40
138.20
150.95
157.30
189.10
PT10-15-44
PT10-15-48
PT10-15-50
PT10-15-60
PT10-25-44
PT10-25-48
PT10-25-50
PT10-25-60
12
14
15
16
18
44
48
50
60
W
W
W
W
OD
(mm)
T10
No. of
Teeth
Product Code
Material: steel
25
green eco®® Series
Environmental-friendly rubber timing belts with EPDM
compound rubber use.
• Excellent ozone resistance.
• Less dispersion of rubber dust.
Standard Dimensions and Product Code
Belt Type
MXL
XL
S2M
S3M
ST1.0
ST1.5
ST2.0
ST55
ST80
ST83
26
ST111
Standard Dimensions
Product Code
Belt Type
Belt Width(mm)
No. of Teeth
Belt Type
Belt Width (inch) x100
Belt Length (inch) x10
Belt Type
Belt Width (mm) x10
Nominal Length (mm)
Belt Type
Belt Width (mm) x10
Nominal Length (mm)
No. of Teeth
No. of Teeth
No. of Teeth
No. of Teeth
No. of Teeth
Belt Type
Belt Type
Belt Type
Belt Type
Belt Type
Belt Width(mm)
Belt Width(mm)
Belt Width(mm)
Belt Width(mm)
Belt Width(mm)
Belt Type
No. of Teeth
Belt Width(mm)
No. of Teeth
Belt Type
Belt Width(mm)
LONG-SPAN Timing Belt
(Open-End & Endless)
This belt is for long-span linear drives and light-duty
synchronous transmission and transportation.
• Freer design possible as the length can be extended.
• Rubber Timing Belt
Size Range for Open-End
Trapezoidal tooth (MXL, XL, L. H)
6.4
Width (mm)
9.5
12.7
025
037
MXL
67
44
34
XL
129
86
64
Inch. x100
Belt Type
19.1
050
(Unit: m)
25.4
075
38.1
100
150
L
72
47
34
H
129
86
63
Round tooth (S2M, S3M, S5M, S8M, S14M)
Width (mm)
S2M
4
6
10
89
58
35
S3M
110
15
41
25
68
65
43
78
50
87
S8M
124
82
60
30
40
50
(Unit: m)
60
Size Range for Endless
48
55
39
30
58
48
34
27
24
* Please order by above length unit.
* Please take the tension limit as around
1/2 that of common sized timing belt.
Minimum
Maximum
Maximum
Belt Length (mm)
L
12.7
355
20.0
H
19.1
343
20.0
XH
50.8
406
20.0
XXH
50.8
406
20.0
S8M
19.1
342
20.0
Belt Width (mm)
• Thermosetting Polyurethane Timing Belt
50.0
406
Size Range for Open-End
Trapezoidal tooth (T80, XL, L)
6.4
Width (mm)
9.5
Belt Type
Width (mm)
T5
Belt Type
51
38
10
Width (mm)
S2M
S3M
Example
Trapezoidal tooth (T80, T5, T10, XL*, L*)
075
Belt Length (m)
Belt Width (mm)
Belt Type
Open-End
* For XL and L types, belt width is indicated as (inch x100)
5
10
87
T10
Round tooth (S2M, S3M)
Belt Width (mm x 10)
Endless
17
35
71
Trapezoidal tooth (T5, T10)
20.0
36
52
XL
L
Belt Length (mm)
48
MXL
Belt Type
Belt Type
Belt Length (inch x 10)
Belt Type
(Unit: m)
050
Trapezoidal tooth (L, H, XH, XXH)
19.1
037
Example
Endless
12.7
025
Inch
Belt Length (m)
Belt Type
Open-End
S14M
S14M
Open-End
* For MXL type, belt width is in mm
Round tooth (S2M, S3M, S5M, S8M, S14M)
20
S5M
Belt Type
Trapezoidal tooth (MXL*, XL, L. H)
Belt Type
Belt Length (m)
* Please order by above length unit.
Belt Type
Example
15
44
29
49
32
20
(Unit: m)
25
17
13
Belt Length (m)
Belt Type
4
5
6
99
80
67
98
82
10
15
50
33
20
(Unit: m)
25
Open-End
27
FREESPAN®® Belt
• Characteristics
1. Suitable for synchronous transportation and
light-duty power transmission requiring positioning.
3. Application for long-span reciprocating and revolving
motion.
2. Possible to mold various shapes and profiles and
to add special cover on back surface of belt.
4. Belt length can be set freely up to 100 meters.
1. Endless Type
For long-span revolving movement.
2. Open-End Type
For reciprocation movement.
• Belt Type
• When clamping the belt, ensure to mesh at least 6 teeth at each side
(8 teeth and above for AT-20H).
• For operation requires flex resistance, endless type with aramid
cord is recommended.
Trapezoidal
Tooth
Steel Wire Cord
Metric Type
Round Tooth
T5 • T10
Inch Pitch Type
XL • L • H
AT Type
AT5 • AT10 • AT-20H
STPD Type
S5M • S8M
Flat
FREESPAN® Belt
F20 • F20D
Trapezoidal
Tooth
Aramid Cord
Round Tooth
Metric Type
T5 • T10
Inch Pitch Type
XL • L • H
STPD Type
S5M • S8M
FT
G: Green
H: White
K: Aramid cord
W: Steel cord
Belt
Type
Form
E: Endless type
T5 • T10 • AT5 • AT10 • AT-20H
O: Open-end type
S5M • S8M • XL • L • H
F20 • F20D
No. of Belt Teeth
Belt Length in mm
only for flat belt F20/F20D
Standard Products
KG: Aramid cord-Green
WH: Steel cord-White
Additional Specifications
P: Profile
C: Cover
T: Fabric on tooth surface
(Low noise application)
B: Fabric on back surface
(Accumulator application)
D: Fabric on both sides
Q: Fabric on profile and tooth surface
R: Fabric on cover and tooth surface
X: Other specifications
(
FREESPAN® Belt
(
Belt Width Code
T5 • T10 • AT5 • AT10 • AT-20H • F20 • F20D: [mm]
S5M • S8M: [mm] X 10
XL • L • H [inch] X 100
CONVEYOR BELTS
Belt Form
Belt CrossSectional
Dimensions
Belt Width
(mm) &
Width Code
T5
5.0
Belt Width
10
15
20
25
30
40
Width Code
10
15
20
25
30
40
Belt Form
Belt CrossSectional
Dimensions
Belt Width
(mm) &
Width Code
T10
AT5
2.0
2.5
1.0
1.2
10.0
Belt Width
15
20
25
30
40
50
75
100
5.0
Width Code
15
20
25
30
40
50
75
100
L
Belt Width
12.7
19.1
25.4
38.1
50.8
101.6
12.7
Width Code
050
075
100
150
200
400
Belt Width
19.1
25.4
38.1
50.8
76.2
101.6
AT-20H
Belt Width
15
20
25
30
40
50
75
100
Width Code
10
15
20
25
30
40
50
Width Code
15
20
25
30
40
50
75
100
Belt Width
50
75
100
Width Code
075
100
150
200
300
400
Belt Width
10
15
20
25
30
50
Width Code
50
75
100
S8M
2.25
3.05
1.5
1.81
Width Code
100
150
200
250
300
500
Belt Width
15
20
25
30
40
50
75
100
Belt Width
6.4
9.5
12.7
19.1
25.4
F20
F20
Width Code
025
037
050
075
100
F20D
2.0
F20D
8.0
5.0
1.03
1.27
5.08
20.0
S5M
2.97
2.29
XL
3.0
5.0
2.0
2.5
10.0
H
1.70
1.90
9.525
Belt Width
10
15
20
25
30
40
50
AT10
1.5
1.2
Width Code
150
200
250
300
400
500
750
10000
Belt Width
15
20
25
40
50
75
100
2.0
Width Code
15
20
25
40
50
75
100
* For F20D, only 40 available
28
* Maximum and minimum lengths of endless type are 100m and 700mm respectively. However, maximum length is 50m for the types with fabric on teeth side, back side and both sides.
* Except T5, AT5, XL and S5M, all timing belts can be laminated with high friction urethane, PVC or felt on backside.
* Compared to non-fabric type, belts with fabric are more slippery and noiseless.
Frictional Forced Power
Transmission Belt
1. Conventional V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 30
2. Triplex® Rawedge Cogged V-Belt . . . . . . . . . . . . . . . P. 31 & 32
3. Conventional Banded . . . . . . . . . . . . . . . . . . . . . . . P. 33 & 34
4. Triplex® Rawedge Cogged Banded . . . . . . . . . . . . . . . . . P. 35
5. Maxstar Wedge® V-Belt
Maxstar Wedge Supreme® . . . . . . . . . . . . . . . . . . . . . . . . P. 36
6. Maxstar Wedge® Narrow Banded . . . . . . . . . . . . . . P. 37 & 38
7. Multi Super Wedge II . . . . . . . . . . . . . . . . . . . . . . . . P. 39 & 40
8. Maxstar Wedge Supreme® Narrow Cogged Banded . . . .P. 41
9. FHP V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 42
10. MBL Super KB® Premium FHP Belt . . . . . . . . . . . . . . . . . P. 43
11. Narrow V-Belt for DIN 7753-ISO 4184 . . . . . . . . . . . . . . . P. 44
12. Double Angle Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 45
13. Ribstar® Belt G (Rubber V-Ribbed Belt) . . . . . . . . . . . . . P. 46
14. SuPER VS® Belt (Variable Speed Belt) . . . . . . . . . . . . . . P. 47
15. Flexstar® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 48
16. Super Flexstar® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 49
17. Polymax® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 50
18. MB Belt® (Polyurethane V-Belt) . . . . . . . . . . . . . . . . . . . . P. 51
19. STARROPE®/SuPER STARROPE®/PRENE V-ROPE/
PRENE HEXAGONAL-ROPE . . . . . . . . . . . . . . . . . . . . . . P. 52
20. Flat Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 53
21. Flexstar® Belt J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 54
Conventional V-Belt
Transmission Belt
This type is most commonly used as a means for power transmission. Therefore, it is
economic and available in the market. Also, it is easily replaced.
• Our “SET-FREE®” system for multiple belt usage is very effective to reduce
dimensional differences of each belt.
• Conventional V-Belt is a heavy-duty power transmission belt, which has heat, oil and
flex resistance as well as a high antistatic property.
Product Code
• Belt code indicates nominal length of the belt in inches.
(For M type, length is outer circumference)
1-1/2”
(38.0mm)
1-1/4”
(31.5mm)
1/2”
(12.5mm)
2/5”
(10.0mm)
2/9”
(5.5mm)
7/8”
(22.0mm)
21/32”
(16.5mm)
5/16”
(9.0mm)
17/32”
(14.0mm)
13/32”
(11.0mm)
29/32”
(25.0mm)
3/4”
(19.0mm)
(Note) Above dimensions are nominal values.
Standard Belt Sizes
M Type
(No.)
30
A Type
(No.)
B Type
(No.)
C Type
(No.)
20
21
22
23
24
25
26
27
28
29
20
21
22
23
24
25
26
27
28
29
60
61
62
63
64
65
66
67
68
69
100
102
105
108
110
112
115
118
120
122
25
26
27
28
29
30
31
32
33
34
65
66
67
68
69
70
71
72
73
74
112
115
118
120
122
125
128
130
132
135
40
42
45
48
50
51
52
53
54
55
30
31
32
33
34
35
36
37
38
39
30
31
32
33
34
35
36
37
38
39
70
71
72
73
74
75
76
77
78
79
125
128
130
135
140
145
150
155
160
165
35
36
37
38
39
40
41
42
43
44
75
76
77
78
79
80
81
82
83
84
138
140
145
150
155
160
165
170
180
190
56
57
58
59
60
61
62
63
64
65
40
41
42
43
44
45
46
47
48
49
40
41
42
43
44
45
46
47
48
49
80
81
82
83
84
85
86
87
88
89
170
180
45
46
47
48
49
50
51
52
53
54
85
86
87
88
89
90
91
92
93
94
200
210
50
50
51
52
53
54
55
56
57
58
59
90
91
92
93
94
95
96
97
98
99
55
56
57
58
59
60
61
62
63
64
95
96
97
98
99
100
102
105
108
110
*: Manufacturable sizes - please contact us for availability.
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
102
105
108
110
112
115
67
68
69
70
71
72
73
74
75
118
120
122
125
128
130
132
135
138
140
77
78
79
80
81
82
83
84
85
142
145
148
150
155
160
165
170
180
190
200
210
220
230
240
250
260
270
D Type
(No.)
E Type
(No.)
100
105
110
115
120
125
130
135
140
145
180
210
240
270
300
330
360
390
420
150
155
160
165
170
180
190
200
210
220
230
240
250
260
270
280
300
310
330
360
Triplex Rawedge
Cogged V-Belt
Transmission Belt
®
®
Widely-used power transmission belt.
Cost efficient, readily available, easily changeable.
AX – 40
Product Code
Belt Code (inch)
Belt Type
• Belt code is nominal length in inches.
1/2”
(13.0mm)
AX
36ª
Standard Belt Sizes
7/8”
(22.0mm)
21/32”
(17.0mm)
BX
11/32”
(9mm)
36ª
CX
7/16”
(11mm)
9/16”
(14mm)
36ª
Belt
Code
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Outside
Length
(Inch)
Belt
Code
22.1
23.1
24.1
25.1
26.1
27.1
28.1
29.1
30.1
31.1
32.1
33.1
34.1
35.1
36.1
37.1
38.1
39.1
40.1
41.1
42.1
43.1
44.1
45.1
46.1
47.1
48.1
49.1
50.1
51.1
52.1
53.1
54.1
55.1
56.1
57.1
58.1
59.1
60.1
61.1
62.1
AX 61
AX 62
AX 63
AX 64
AX 65
AX 66
AX 67
AX 68
AX 69
AX 70
AX 71
AX 72
AX 73
AX 74
AX 75
AX 76
AX 77
AX 78
AX 79
AX 80
AX 81
AX 82
AX 83
AX 84
AX 85
AX 86
AX 87
AX 88
AX 89
AX 90
AX 91
AX 92
AX 93
AX 94
AX 95
AX 96
AX 97
AX 98
AX 99
AX 100
AX 101
AX
Outside
Length
(Inch)
63.1
64.1
65.1
66.1
67.1
68.1
69.1
70.1
71.1
72.1
73.1
74.1
75.1
76.1
77.1
78.1
79.1
80.1
81.1
82.1
83.1
84.1
85.1
86.1
87.1
88.1
89.1
90.1
91.1
92.1
93.1
94.1
95.1
96.1
97.1
98.1
99.1
100.1
101.1
102.1
103.1
Belt
Code
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
102
103
104
105
106
107
108
109
110
112
115
116
118
120
122
124
125
128
130
134
135
136
140
144
150
158
160
162
165
167
170
173
176
180
185
187
190
195
197
200
Outside
Length
(Inch)
104.1
105.1
106.1
107.1
108.1
109.1
110.1
111.1
112.1
114.1
117.1
118.1
120.1
122.1
124.1
126.1
127.1
130.1
132.1
136.1
137.1
138.1
142.1
146.1
152.1
160.1
162.1
164.1
167.1
169.1
172.1
173.1
178.1
182.1
187.1
189.1
192.1
197.1
199.1
202.1
All dimensions are nominal value.
: Available sizes for raw edge cogged belt AX.
31
Triplex®® Rawedge Cogged V-Belt
Belt
Code
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
Outside
Length
(Inch)
22.8
23.8
24.8
25.8
26.8
27.8
28.8
29.8
30.8
31.8
32.8
33.8
34.8
35.8
36.8
37.8
38.8
39.8
40.8
41.8
42.8
43.8
44.8
45.8
46.8
47.8
48.8
49.8
50.8
51.8
52.8
53.8
54.8
55.8
56.8
57.8
58.8
59.8
60.8
61.8
62.8
63.8
64.8
65.8
66.8
67.8
68.8
69.8
70.8
71.8
72.8
73.8
74.8
75.8
76.8
77.8
78.8
79.8
Belt
Code
BX 78
BX 79
BX 80
BX 81
BX 82
BX 83
BX 84
BX 85
BX 86
BX 87
BX 88
BX 89
BX 90
BX 91
BX 92
BX 93
BX 94
BX 95
BX 96
BX 97
BX 98
BX 99
BX 100
BX 101
BX 102
BX 103
BX 104
BX 105
BX 106
BX 107
BX 108
BX 110
BX 112
BX 114
BX 115
BX 116
BX 117
BX 118
BX 120
BX 122
BX 124
BX 125
BX 126
BX 128
BX 130
BX 132
BX 133
BX 134
BX 135
BX 136
BX 138
BX 140
BX 142
BX 144
BX 146
BX 148
BX 150
BX 152
BX
Outside
Length
(Inch)
80.8
81.8
82.8
83.8
84.8
85.8
86.8
87.8
88.8
89.8
90.8
91.8
92.8
93.8
94.8
95.8
96.8
97.8
98.8
99.8
100.8
101.8
102.8
103.8
104.8
105.8
106.8
107.8
108.8
109.8
110.8
112.8
114.8
116.8
117.8
118.8
119.8
120.8
122.8
124.8
126.8
127.8
128.8
130.8
132.8
134.8
135.8
136.8
137.8
138.8
140.8
142.8
144.8
146.8
148.8
150.8
152.8
154.8
: Available sizes for raw edge cogged belt BX and CX.
32
Belt
Code
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
155
156
158
160
162
164
165
166
169
170
173
175
177
180
185
188
190
192
195
197
200
204
205
210
215
218
220
225
228
230
232
236
238
240
245
248
250
255
260
264
268
270
276
280
290
300
310
320
330
340
350
360
370
380
390
400
Outside
Length
(Inch)
157.8
158.8
160.8
162.8
164.8
166.8
167.8
168.8
171.8
172.8
175.8
177.8
179.8
182.8
187.8
190.8
192.8
194.8
197.8
199.8
202.8
206.8
207.8
212.8
217.3
220.3
222.3
227.3
230.3
232.3
234.3
238.3
240.3
242.3
247.3
250.3
252.3
257.3
262.3
266.3
270.3
272.3
278.3
272.3
292.3
302.3
312.3
322.3
332.3
342.3
352.3
362.3
372.3
382.3
392.3
402.3
Belt
Code
CX 30
CX 31
CX 32
CX 33
CX 34
CX 35
CX 36
CX 37
CX 38
CX 39
CX 40
CX 41
CX 42
CX 43
CX 44
CX 45
CX 46
CX 47
CX 48
CX 49
CX 50
CX 51
CX 52
CX 53
CX 54
CX 55
CX 56
CX 57
CX 58
CX 59
CX 60
CX 61
CX 62
CX 63
CX 64
CX 65
CX 66
CX 67
CX 68
CX 69
CX 70
CX 71
CX 72
CX 73
CX 74
CX 75
CX 76
CX 77
CX 78
CX 79
CX 80
CX 81
CX 82
CX 83
CX 84
CX 85
CX 86
CX 87
CX 88
CX 89
CX 90
CX 91
CX 92
CX 93
CX 94
CX 95
CX 96
CX 97
CX 98
CX 99
CX 100
CX 101
CX 102
CX 103
CX 104
CX 105
CX 106
CX 107
CX 108
CX 109
CX 110
CX 111
CX 112
CX 113
Outside
Length
(Inch)
34.2
35.2
36.2
37.2
38.2
39.2
40.2
41.2
42.2
43.2
44.2
45.2
46.2
47.2
48.2
49.2
50.2
51.2
52.2
53.2
54.2
55.2
56.2
57.2
58.2
59.2
60.2
61.2
62.2
63.2
64.2
65.2
66.2
67.2
68.2
69.2
70.2
71.2
72.2
73.2
74.2
75.2
76.2
77.2
78.2
79.2
80.2
81.2
82.2
83.2
84.2
85.2
86.2
87.2
88.2
89.2
90.2
91.2
92.2
93.2
94.2
95.2
96.2
97.2
98.2
99.2
100.2
101.2
102.2
103.2
104.2
105.2
106.2
107.2
108.2
109.2
110.2
111.2
112.2
113.2
114.2
115.2
116.2
117.2
Size range: 79” - 660”
CX
Belt
Code
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
114
115
116
118
120
122
124
125
126
128
129
130
132
134
136
138
140
142
144
146
148
150
152
154
155
158
160
162
164
168
170
173
175
177
180
183
185
187
190
195
197
200
202
204
205
210
215
220
222
224
225
228
230
235
238
240
246
248
250
256
258
260
264
268
270
275
280
290
300
320
340
350
360
370
380
400
415
434
473
492
512
550
590
Outside
Length
(Inch)
118.2
119.2
120.2
122.2
124.2
126.2
128.2
129.2
130.2
132.2
133.2
134.2
136.2
138.2
140.2
142.2
144.2
146.2
148.2
150.2
152.2
154.2
156.2
158.2
159.2
162.2
164.2
166.2
168.2
172.2
174.2
177.2
179.2
181.2
184.2
187.2
189.2
191.2
194.2
199.2
201.2
204.2
206.2
208.2
209.2
214.2
217.2
222.2
224.2
226.2
227.2
230.2
232.2
237.2
240.2
242.2
248.2
250.2
252.2
258.2
260.2
262.2
264.2
270.2
272.2
277.2
282.2
292.2
302.2
322.2
342.2
352.2
362.2
372.2
382.2
402.2
417.2
436.2
475.2
494.2
514.2
552.2
592.2
Conventional Banded
All the quality features and benefits of single belts - Plus.
• Designed for tough applications where multiple drive belts are subject
to heavy shock and pulsating loads.
• Banding prevents belt whip, belt turnover, vibration and jumping off that may
occur with single belts in multiple drive applications.
• Lateral rigidity keeps the belt running in a straight line as it enters the pulley
grooves during strong pulsating or shock loads for reduced wear.
• Frictional and wedging principles of the V-Belt drive apply and prevent slip at
low tension and low bearing loads.
Product Code
THICKNESS
Outside
Length
(Inch)
3R = 3 Ribs
B = Cross Section
144 = Nominal Length,
144.0 inches
PITCH
BETWEEN
BELTS
TOP
WIDTH
Belt
No.
3R B 144
Belt
No.
Outside
Length
(Inch)
Belt
No.
Outside
Length
(Inch)
B
Belt
No.
Belt
Section
Top Width
W
(Inches)
Thickness
H
(Inches)
B
C
D
.66
.88
1.25
.51
.63
.85
Outside
Length
(Inch)
Belt
No.
Outside
Length
(Inch)
Pitch Between Belts
E
(Inches)
.75
1.00
1.46
Belt
No.
Outside
Length
(Inch)
2R
3R
4R
5R
B
B
B
B
55
55
55
55
57.8
57.8
57.8
57.8
2R
3R
4R
5R
B
B
B
B
71
71
71
71
73.8
73.8
73.8
73.8
2R
3R
4R
5R
B
B
B
B
83
83
83
83
85.8
85.8
85.8
85.8
2R
3R
4R
5R
B
B
B
B
100
100
100
100
102.8
102.8
102.8
102.8
2R
3R
4R
5R
B
B
B
B
120
120
120
120
122.8
122.8
122.8
122.8
2R
3R
4R
5R
B
B
B
B
180
180
180
180
182.8
182.8
182.8
182.8
2R
3R
4R
5R
B
B
B
B
60
60
60
60
62.8
62.8
62.8
62.8
2R
3R
4R
5R
B
B
B
B
72
72
72
72
74.8
74.8
74.8
74.8
2R
3R
4R
5R
B
B
B
B
85
85
85
85
87.8
87.8
87.8
87.8
2R
3R
4R
5R
B
B
B
B
103
103
103
103
105.8
105.8
105.8
105.8
2R
3R
4R
5R
B
B
B
B
124
124
124
124
126.8
126.8
126.8
126.8
2R
3R
4R
5R
B
B
B
B
195
195
195
195
197.8
197.8
197.8
197.8
2R
3R
4R
5R
B
B
B
B
61
61
61
61
63.8
63.8
63.8
63.8
2R
3R
4R
5R
B
B
B
B
73
73
73
73
75.8
75.8
75.8
75.8
2R
3R
4R
5R
B
B
B
B
86
86
86
86
88.8
88.8
88.8
88.8
2R
3R
4R
5R
B
B
B
B
104
104
104
104
106.8
106.8
106.8
106.8
2R
3R
4R
5R
B
B
B
B
128
128
128
128
130.8
130.8
130.8
130.8
2R
3R
4R
5R
B
B
B
B
210
210
210
210
212.8
212.8
212.8
212.8
2R
3R
4R
5R
B
B
B
B
62
62
62
62
64.8
64.8
64.8
64.8
2R
3R
4R
5R
B
B
B
B
74
74
74
74
76.8
76.8
76.8
76.8
2R
3R
4R
5R
B
B
B
B
87
87
87
87
89.8
89.8
89.8
89.8
2R
3R
4R
5R
B
B
B
B
105
105
105
105
107.8
107.8
107.8
107.8
2R
3R
4R
5R
B
B
B
B
133
133
133
133
135.8
135.8
135.8
135.8
2R
3R
4R
5R
B
B
B
B
225
225
225
225
226.3
226.3
226.3
226.3
2R
3R
4R
5R
B
B
B
B
63
63
63
63
65.8
65.8
65.8
65.8
2R
3R
4R
5R
B
B
B
B
75
75
75
75
77.8
77.8
77.8
77.8
2R
3R
4R
5R
B
B
B
B
88
88
88
88
90.8
90.8
90.8
90.8
2R
3R
4R
5R
B
B
B
B
107
107
107
107
109.8
109.8
109.8
109.8
2R
3R
4R
5R
B
B
B
B
136
136
136
136
138.8
138.8
138.8
138.8
2R
3R
4R
5R
B
B
B
B
240
240
240
240
241.3
241.3
241.3
241.3
2R
3R
4R
5R
B
B
B
B
64
64
64
64
66.8
66.8
66.8
66.8
2R
3R
4R
5R
B
B
B
B
77
77
77
77
79.8
79.8
79.8
79.8
2R
3R
4R
5R
B
B
B
B
90
90
90
90
92.8
92.8
92.8
92.8
2R
3R
4R
5R
B
B
B
B
108
108
108
108
110.8
110.8
110.8
110.8
2R
3R
4R
5R
B
B
B
B
144
144
144
144
146.8
146.8
146.8
146.8
2R
3R
4R
5R
B
B
B
B
255
255
255
255
256.3
256.3
256.3
256.3
2R
3R
4R
5R
B
B
B
B
65
65
65
65
67.8
67.8
67.8
67.8
2R
3R
4R
5R
B
B
B
B
78
78
78
78
80.8
80.8
80.8
80.8
2R
3R
4R
5R
B
B
B
B
93
93
93
93
95.8
95.8
95.8
95.8
2R
3R
4R
5R
B
B
B
B
110
110
110
110
112.8
112.8
112.8
112.8
2R
3R
4R
5R
B
B
B
B
148
148
148
148
150.8
150.8
150.8
150.8
2R
3R
4R
5R
B
B
B
B
270
270
270
270
271.3
271.3
271.3
271.3
2R
3R
4R
5R
B
B
B
B
66
66
66
66
68.8
68.8
68.8
68.8
2R
3R
4R
5R
B
B
B
B
79
79
79
79
81.8
81.8
81.8
81.8
2R
3R
4R
5R
B
B
B
B
95
95
95
95
97.8
97.8
97.8
97.8
2R
3R
4R
5R
B
B
B
B
111
111
111
111
113.8
113.8
113.8
113.8
2R
3R
4R
5R
B
B
B
B
150
150
150
150
152.8
152.8
152.8
152.8
2R
3R
4R
5R
B
B
B
B
285
285
285
285
286.3
286.3
286.3
286.3
2R
3R
4R
5R
B
B
B
B
67
67
67
67
69.8
69.8
69.8
69.8
2R
3R
4R
5R
B
B
B
B
80
80
80
80
82.8
82.8
82.8
82.8
2R
3R
4R
5R
B
B
B
B
96
96
96
96
98.8
98.8
98.8
98.8
2R
3R
4R
5R
B
B
B
B
112
112
112
112
114.8
114.8
114.8
114.8
2R
3R
4R
5R
B
B
B
B
158
158
158
158
160.8
160.8
160.8
160.8
2R
3R
4R
5R
B
B
B
B
300
300
300
300
301.3
301.3
301.3
301.3
2R
3R
4R
5R
B
B
B
B
68
68
68
68
70.8
70.8
70.8
70.8
2R
3R
4R
5R
B
B
B
B
81
81
81
81
83.8
83.8
83.8
83.8
2R
3R
4R
5R
B
B
B
B
97
97
97
97
99.8
99.8
99.8
99.8
2R
3R
4R
5R
B
B
B
B
114
114
114
114
116.8
116.8
116.8
116.8
2R
3R
4R
5R
B
B
B
B
162
162
162
162
164.8
164.8
164.8
164.8
2R
3R
4R
5R
B
B
B
B
315
315
315
315
316.3
316.3
316.3
316.3
2R
3R
4R
5R
B
B
B
B
70
70
70
70
72.8
72.8
72.8
72.8
2R
3R
4R
5R
B
B
B
B
82
82
82
82
84.8
84.8
84.8
84.8
2R
3R
4R
5R
B
B
B
B
99
99
99
99
101.8
101.8
101.8
101.8
2R
3R
4R
5R
B
B
B
B
115
115
115
115
117.8
117.8
117.8
117.8
2R
3R
4R
5R
B
B
B
B
173
173
173
173
175.8
175.8
175.8
175.8
33
Conventional Banded
34
Belt
No.
C
Outside
Length
Belt
No.
Outside
Length
2R
3R
4R
5R
C
C
C
C
68
68
68
68
72.2
72.2
72.2
72.2
2R
3R
4R
5R
C
C
C
C
112
112
112
112
116.2
116.2
116.2
116.2
2R
3R
4R
5R
C
C
C
C
71
71
71
71
75.2
75.2
75.2
75.2
2R
3R
4R
5R
C
C
C
C
120
120
120
120
2R
3R
4R
5R
C
C
C
C
75
75
75
75
79.2
79.2
79.2
79.2
2R
3R
4R
5R
C
C
C
C
2R
3R
4R
5R
C
C
C
C
81
81
81
81
85.2
85.2
85.2
85.2
2R
3R
4R
5R
2R
3R
4R
5R
C
C
C
C
85
85
85
85
89.2
89.2
89.2
89.2
2R
3R
4R
5R
C
C
C
C
90
90
90
90
2R
3R
4R
5R
C
C
C
C
2R
3R
4R
5R
Belt
No.
Outside
Length
Belt
No.
Outside
Length
Belt
No.
2R
3R
4R
5R
C
C
C
C
240
240
240
240
242.2
242.2
242.2
242.2
3R D 120
4R D 120
5R D 120
125.2
125.2
125.2
124.2
124.2
124.2
124.2
2R
3R
4R
5R
C
C
C
C
255
255
255
255
257.2
257.2
257.2
257.2
3R D 128
4R D 128
5R D 128
124
124
124
124
128.2
128.2
128.2
128.2
2R
3R
4R
5R
C
C
C
C
270
270
270
270
272.2
272.2
272.2
272.2
C
C
C
C
128
128
128
128
132.2
132.2
132.2
132.2
2R
3R
4R
5R
C
C
C
C
285
285
285
285
287.2
287.2
287.2
287.2
2R
3R
4R
5R
C
C
C
C
136
136
136
136
140.2
140.2
140.2
140.2
2R
3R
4R
5R
C
C
C
C
300
300
300
300
302.2
302.2
302.2
302.2
94.2
94.2
94.2
94.2
2R
3R
4R
5R
C
C
C
C
144
144
144
144
148.2
148.2
148.2
148.2
2R
3R
4R
5R
C
C
C
C
315
315
315
315
96
96
96
96
100.2
100.2
100.2
100.2
2R
3R
4R
5R
C
C
C
C
158
158
158
158
162.2
162.2
162.2
162.2
2R
3R
4R
5R
C
C
C
C
C
C
C
C
97
97
97
97
101.2
101.2
101.2
101.2
2R
3R
4R
5R
C
C
C
C
162
162
162
162
166.2
166.2
166.2
166.2
2R
3R
4R
5R
2R
3R
4R
5R
C
C
C
C
99
99
99
99
103.2
103.2
103.2
103.2
2R
3R
4R
5R
C
C
C
C
173
173
173
173
177.2
177.2
177.2
177.2
2R
3R
4R
5R
C
C
C
C
100
100
100
100
104.2
104.2
104.2
104.2
2R
3R
4R
5R
C
C
C
C
180
180
180
180
2R
3R
4R
5R
C
C
C
C
105
105
105
105
109.2
109.2
109.2
109.2
2R
3R
4R
5R
C
C
C
C
2R
3R
4R
5R
C
C
C
C
108
108
108
108
112.2
112.2
112.2
112.2
2R
3R
4R
5R
2R
3R
4R
5R
C
C
C
C
109
109
109
109
113.2
113.2
113.2
113.2
2R
3R
4R
5R
(Inch)
D
Outside
Length
Belt
No.
Outside
Length
3R D 225
4R D 225
5R D 225
227.7
227.7
227.7
3R D 360
4R D 360
5R D 360
362.7
362.7
362.7
133.2
133.2
133.2
3R D 240
4R D 240
5R D 240
242.7
242.7
242.7
3R D 390
4R D 390
5R D 390
392.7
392.7
392.7
3R D 144
4R D 144
5R D 144
149.2
149.2
149.2
3R D 255
4R D 255
5R D 255
257.7
257.7
257.7
3R D 420
4R D 420
5R D 420
422.7
422.7
422.7
3R D 158
4R D 158
5R D 158
163.2
163.2
163.2
3R D 270
4R D 270
5R D 270
272.7
272.7
272.7
3R D 450
4R D 450
5R D 450
452.7
452.7
452.7
3R D 162
4R D 162
5R D 162
167.2
167.2
167.2
3R D 285
4R D 285
5R D 285
287.7
287.7
287.7
3R D 480
4R D 480
5R D 480
482.7
482.7
482.7
3R D 173
4R D 173
5R D 173
178.2
178.2
178.2
3R D 300
4R D 300
5R D 300
302.7
302.7
302.7
3R D 540
4R D 540
5R D 540
542.7
542.7
542.7
317.2
317.2
317.2
317.2
3R D 180
4R D 180
5R D 180
185.2
185.2
185.2
3R D 315
4R D 315
5R D 315
317.7
317.7
317.7
3R D 600
4R D 600
5R D 600
602.7
602.7
602.7
330
330
330
330
332.2
332.2
332.2
332.2
3R D 195
4R D 195
5R D 195
200.2
200.2
200.2
3R D 330
4R D 330
5R D 330
332.7
332.7
332.7
3R D 660
4R D 660
5R D 660
662.7
662.7
662.7
C
C
C
C
345
345
345
345
347.2
347.2
347.2
347.2
3R D 210
4R D 210
5R D 210
215.2
215.2
215.2
3R D 345
4R D 345
5R D 345
347.7
347.7
347.7
2R
3R
4R
5R
C
C
C
C
360
360
360
360
362.2
362.2
362.2
362.2
184.2
184.2
184.2
184.2
2R
3R
4R
5R
C
C
C
C
390
390
390
390
392.2
392.2
392.2
392.2
195
195
195
195
199.2
199.2
199.2
199.2
2R
3R
4R
5R
C
C
C
C
420
420
420
420
422.2
422.2
422.2
422.2
C
C
C
C
210
210
210
210
214.2
214.2
214.2
214.2
C
C
C
C
225
225
225
225
227.2
227.2
227.2
227.2
(Inch)
(Inch)
(Inch)
(Inch)
(Inch)
Triplex®®Rawedge Cogged Banded
• Designed for tough applications where multiple drive belts are subject
to heavy shock and pulsating loads
• Banding prevents belt whip, belt turnover, vibration and jumping off that may
occur with single belts in multiple drive applications.
• Frictional and wedging principles of the V-Belt drive apply and prevent slip at
low tension and low bearing loads.
Product Code
PITCH
BETWEEN
BELTS
TOP
WIDTH
THICKNESS
Belt
No.
3R = 3 Ribs
B = Cross Section
X = Rawedge Cogged Construction
144 = Nominal Length, 144.0 inches
3R BX 144
Belt
No.
Outside
Length
(Inch)
BX
Outside
Length
(Inch)
Belt
No.
Outside
Length
Belt
No.
(Inch)
Belt
Section
Top Width
W
(Inches)
Thickness
H
(Inches)
B
C
.66
.88
.51
.63
Belt
No.
Outside
Length
(Inch)
Pitch Between Belts
E
(Inches)
.75
1.00
CX
Outside
Length
(Inch)
Belt
No.
Outside
Length
(Inch)
2R
3R
4R
5R
BX
BX
BX
BX
97
97
97
97
99.8
99.8
99.8
99.8
2R
3R
4R
5R
BX
BX
BX
BX
128
128
128
128
130.8
130.8
130.8
130.8
2R
3R
4R
5R
BX
BX
BX
BX
180
180
180
180
182.8
182.8
182.8
182.8
2R
3R
4R
5R
CX
CX
CX
CX
96
96
96
96
100.2
100.2
100.2
100.2
2R
3R
4R
5R
CX
CX
CX
CX
144
144
144
144
148.2
148.2
148.2
148.2
2R
3R
4R
5R
CX
CX
CX
CX
195
195
195
195
199.2
199.2
199.2
199.2
2R
3R
4R
5R
BX
BX
BX
BX
105
105
105
105
107.8
107.8
107.8
107.8
2R
3R
4R
5R
BX
BX
BX
BX
144
144
144
144
146.8
146.8
146.8
146.8
2R
3R
4R
5R
BX
BX
BX
BX
195
195
195
195
197.8
197.8
197.8
197.8
2R
3R
4R
5R
CX
CX
CX
CX
105
105
105
105
109.2
109.2
109.2
109.2
2R
3R
4R
5R
CX
CX
CX
CX
158
158
158
158
162.2
162.2
162.2
162.2
2R
3R
4R
5R
CX
CX
CX
CX
210
210
210
210
214.2
214.2
214.2
214.2
2R
3R
4R
5R
BX
BX
BX
BX
112
112
112
112
114.8
114.8
114.8
114.8
2R
3R
4R
5R
BX
BX
BX
BX
158
158
158
158
160.8
160.8
160.8
160.8
2R
3R
4R
5R
BX
BX
BX
BX
210
210
210
210
212.8
212.8
212.8
212.8
2R
3R
4R
5R
CX
CX
CX
CX
107
107
107
107
111.2
111.2
111.2
111.2
2R
3R
4R
5R
CX
CX
CX
CX
162
162
162
162
166.2
166.2
166.2
166.2
2R
3R
4R
5R
CX
CX
CX
CX
225
225
225
225
229.2
229.2
229.2
229.2
2R
3R
4R
5R
BX
BX
BX
BX
120
120
120
120
122.8
122.8
122.8
122.8
2R
3R
4R
5R
BX
BX
BX
BX
173
173
173
173
175.8
175.8
175.8
175.8
2R
3R
4R
5R
BX
BX
BX
BX
240
240
240
240
242.8
242.8
242.8
242.8
2R
3R
4R
5R
CX
CX
CX
CX
112
112
112
112
116.2
116.2
116.2
116.2
2R
3R
4R
5R
CX
CX
CX
CX
173
173
173
173
177.2
177.2
177.2
177.2
2R
3R
4R
5R
CX
CX
CX
CX
240
240
240
240
242.2
242.2
242.2
242.2
2R
3R
4R
5R
CX
CX
CX
CX
120
120
120
120
124.2
124.2
124.2
124.2
2R
3R
4R
5R
CX
CX
CX
CX
180
180
180
180
184.2
184.2
184.2
184.2
2R
3R
4R
5R
CX
CX
CX
CX
128
128
128
128
132.2
132.2
132.2
132.2
2R
3R
4R
5R
CX
CX
CX
CX
187
187
187
187
191.2
191.2
191.2
191.2
35
Maxstar Wedge Supreme®®
Maxstar Wedge®® V-Belt
With its unique narrow width, the V-Belt has high power
transmission capability.
• Energy-saving and compact design application.
• Possible to operate with maximum speed of 40m/sec.
• Excellent heat resistance and antistatic property.
• Our “set-free” system for multiple belt usage is very effective to reduce
dimensional differences of each belt.
Product Code
Comparison with Standard Belt
1”
(25.4mm)
3/8”
(9.5mm)
(MAXSTAR WEDGE V-Belt)
5/8”
(15.9mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
11/32
(8.7mm)
5/16
(7.9mm)
7/8”
(22.2mm)
17/32
(13.5mm)
17/32
(13.5mm)
(Standard V-Belt)
Standard Belt Sizes
Product
Code
36
3V • 3VX
(Note) Above are nominal values.
Belt Length
(Inch)
Product
Code
5V • 5VX
Belt Length
(Inch)
Product
Code
8V
Belt Length
(Inch)
3V
3V
3V
3V
3V
250
265
280
300
315
25.0
26.5
28.0
30.0
31.5
5V
5V
5V
5V
5V
500
530
560
600
630
50.0
53.0
56.0
60.0
63.0
•8V
•8V
•8V
•8V
•8V
1000
1060
1120
1180
1250
100.0
106.0
112.0
118.0
125.0
3V
3V
3V
3V
3V
335
355
375
400
425
33.5
35.5
37.5
40.0
42.5
5V
5V
5V
5V
5V
670
710
750
800
850
67.0
71.0
75.0
80.0
85.0
•8V
•8V
•8V
•8V
•8V
1320
1400
1500
1600
1700
132.0
140.0
150.0
160.0
170.0
•3V
•3V
•3V
•3V
•3V
450
475
500
530
560
45.0
47.5
50.0
53.0
56.0
•5V 900
•5V 950
•5V 1000
•5V 1060
•5V 1120
90.0
95.0
100.0
106.0
112.0
•8V
•8V
•8V
•8V
•8V
1800
1900
2000
2120
2240
180.0
190.0
200.0
212.0
224.0
•3V
•3V
•3V
•3V
•3V
600
630
670
710
750
60.0
63.0
67.0
71.0
75.0
•5V
•5V
•5V
•5V
•5V
1180
1250
1320
1400
1500
118.0
125.0
132.0
140.0
150.0
•8V
•8V
•8V
•8V
•8V
2360
2500
2600
2800
3000
236.0
250.0
260.0
280.0
300.0
•3V 800
•3V 850
•3V 900
•3V 950
•3V 1000
80.0
85.0
90.0
95.0
100.0
•5V
•5V
•5V
•5V
•5V
1600
1700
1800
1900
2000
160.0
170.0
180.0
190.0
200.0
•8V
•8V
•8V
•8V
•8V
3150
3350
3550
3750
4000
315.0
335.0
355.0
375.0
400.0
•3V
•3V
•3V
•3V
•3V
1060
1120
1180
1250
1320
106.0
112.0
118.0
125.0
132.0
•5V
•5V
•5V
•5V
•5V
2120
2240
2360
2500
2650
212.0
224.0
236.0
250.0
265.0
•8V
•8V
•8V
•8V
•8V
4250
4500
4750
5000
5600
425.0
450.0
475.0
500.0
560.0
•3V 1400
140.0
•5V
•5V
•5V
•5V
•5V
2800
3000
3150
3350
3550
280.0
300.0
315.0
335.0
355.0
•8V 6000
600.0
• signifies availability of Multi type MAXSTAR WEDGE Belt. Standard number of ribs is 2, 3, 4, 5 for all types (3V, 5V, 8V). We manufacture only standard sizes.
: Corresponding sizes for Raw Edge cogged Type “MAXSTAR WEDGE SUPREME” 3VX and 5VX.
Maxstar Wedge®® Narrow Banded
• Designed for tough applications where multiple drive belts are subject to heavy
shock and pulsating loads.
• Banding prevents belt whip, belt turnover, vibration and jumping off that may occur
with single belts in multiple drive applications.
• Frictional and wedging principles of the V-Belt drive apply and prevent slip at low
tension and low bearing loads.
Product Code
TOP
WIDTH
3V
4R = 4 Ribs
3V = Cross Section
1320 = Outside Length, 132.0 inches
4R 3V 1320
Top Width
W
Belt Section (Inches)
3V
THICKNESS
3V
Belt
No.
3V
3V
5V
8V
3/8
5/8
1
Outside Length
(Inch)
Belt
No.
Thickness
H
(Inches)
5/16
17/32
7/8
Outside Length
(Inch)
Belt
No.
Outside Length
(Inch)
2R
3R
4R
5R
3V
3V
3V
3V
450
450
450
450
45.0
45.0
45.0
45.0
2R
3R
4R
5R
3V
3V
3V
3V
670
670
670
670
67.0
67.0
67.0
67.0
2R
3R
4R
5R
3V
3V
3V
3V
1000
1000
1000
1000
100.0
100.0
100.0
100.0
2R
3R
4R
5R
3V
3V
3V
3V
475
475
475
475
47.5
47.5
47.5
47.5
2R
3R
4R
5R
3V
3V
3V
3V
710
710
710
710
71.0
71.0
71.0
71.0
2R
3R
4R
5R
3V
3V
3V
3V
1060
1060
1060
1060
106.0
106.0
106.0
106.0
2R
3R
4R
5R
3V
3V
3V
3V
500
500
500
500
50.0
50.0
50.0
50.0
2R
3R
4R
5R
3V
3V
3V
3V
750
750
750
750
75.0
75.0
75.0
75.0
2R
3R
4R
5R
3V
3V
3V
3V
1120
1120
1120
1120
112.0
112.0
112.0
112.0
2R
3R
4R
5R
3V
3V
3V
3V
530
530
530
530
53.0
53.0
53.0
53.0
2R
3R
4R
5R
3V
3V
3V
3V
800
800
800
800
80.0
80.0
80.0
80.0
2R
3R
4R
5R
3V
3V
3V
3V
1180
1180
1180
1180
118.0
118.0
118.0
118.0
2R
3R
4R
5R
3V
3V
3V
3V
560
560
560
560
56.0
56.0
56.0
56.0
2R
3R
4R
5R
3V
3V
3V
3V
850
850
850
850
85.0
85.0
85.0
85.0
2R
3R
4R
5R
3V
3V
3V
3V
1250
1250
1250
1250
125.0
125.0
125.0
125.0
2R
3R
4R
5R
3V
3V
3V
3V
600
600
600
600
60.0
60.0
60.0
60.0
2R
3R
4R
5R
3V
3V
3V
3V
900
900
900
900
90.0
90.0
90.0
90.0
2R
3R
4R
5R
3V
3V
3V
3V
1320
1320
1320
1320
132.0
132.0
132.0
132.0
2R
3R
4R
5R
3V
3V
3V
3V
630
630
630
630
63.0
63.0
63.0
63.0
2R
3R
4R
5R
3V
3V
3V
3V
950
950
950
950
95.0
95.0
95.0
95.0
2R
3R
4R
5R
3V
3V
3V
3V
1400
1400
1400
1400
140.0
140.0
140.0
140.0
37
Maxstar Wedge®®
Narrow Banded
38
Belt
No.
Outside
Length
Belt
No.
2R 5V 630
3R 5V 630
4R 5V 630
5R 5V 630
63.0
63.0
63.0
63.0
2R 5V 670
3R 5V 670
4R 5V 670
5R 5V 670
5V
Outside
Length
Belt
No.
Outside
Length
Belt
No.
Outside
Length
Belt
No.
2R 5V 1180
3R 5V 1180
4R 5V 1180
5R 5V 1180
118.0
118.0
118.0
118.0
2R 5V 2240
3R 5V 2240
4R 5V 2240
5R 5V 2240
224.0
224.0
224.0
224.0
3R 8V 1000
4R 8V 1000
5R 8V 1000
100.0
100.0
100.0
67.0
67.0
67.0
67.0
2R 5V 1250
3R 5V 1250
4R 5V 1250
5R 5V 1250
125.0
125.0
125.0
125.0
2R 5V 2360
3R 5V 2360
4R 5V 2360
5R 5V 2360
236.0
236.0
236.0
236.0
3R 8V 1060
4R 8V 1060
5R 8V 1060
2R 5V 710
3R 5V 710
4R 5V 710
5R 5V 710
71.0
71.0
71.0
71.0
2R 5V 1320
3R 5V 1320
4R 5V 1320
5R 5V 1320
132.0
132.0
132.0
132.0
2R 5V 2500
3R 5V 2500
4R 5V 2500
5R 5V 2500
250.0
250.0
250.0
250.0
2R 5V 750
3R 5V 750
4R 5V 750
5R 5V 750
75.0
75.0
75.0
75.0
2R 5V 1400
3R 5V 1400
4R 5V 1400
5R 5V 1400
140.0
140.0
140.0
140.0
2R 5V 2650
3R 5V 2650
4R 5V 2650
5R 5V 2650
265.0
265.0
265.0
265.0
2R 5V 800
3R 5V 800
4R 5V 800
5R 5V 800
80.0
80.0
80.0
80.0
2R 5V 1500
3R 5V 1500
4R 5V 1500
5R 5V 1500
150.0
150.0
150.0
150.0
2R 5V 2800
3R 5V 2800
4R 5V 2800
5R 5V 2800
280.0
280.0
280.0
280.0
2R 5V 850
3R 5V 850
4R 5V 850
5R 5V 850
85.0
85.0
85.0
85.0
2R 5V 1600
3R 5V 1600
4R 5V 1600
5R 5V 1600
160.0
160.0
160.0
160.0
2R 5V 3000
3R 5V 3000
4R 5V 3000
5R 5V 3000
2R 5V 900
3R 5V 900
4R 5V 900
5R 5V 900
90.0
90.0
90.0
90.0
2R 5V 1700
3R 5V 1700
4R 5V 1700
5R 5V 1700
170.0
170.0
170.0
1700
2R 5V 950
3R 5V 950
4R 5V 950
5R 5V 950
95.0
95.0
95.0
95.0
2R 5V 1800
3R 5V 1800
4R 5V 1800
5R 5V 1800
2R 5V 1000
3R 5V 1000
4R 5V 1000
5R 5V 1000
100.0
100.0
100.0
100.0
2R 5V 1060
3R 5V 1060
4R 5V 1060
5R 5V 1060
2R 5V 1120
3R 5V 1120
4R 5V 1120
5R 5V 1120
8V
Outside
Length
Belt
No.
Outside
Length
3R 8V 1800
4R 8V 1800
5R 8V 1800
180.0
180.0
180.0
3R 8V 3150
4R 8V 3150
5R 8V 3150
315.0
315.0
315.0
106.0
106.0
106.0
3R 8V 1900
4R 8V 1900
5R 8V 1900
190.0
190.0
190.0
3R 8V 3350
4R 8V 3350
5R 8V 3350
335.0
335.0
335.0
3R 8V 1120
4R 8V 1120
5R 8V 1120
112.0
112.0
112.0
3R 8V 2000
4R 8V 2000
5R 8V 2000
200.0
200.0
200.0
3R 8V 3550
4R 8V 3550
5R 8V 3550
355.0
355.0
355.0
3R 8V 1180
4R 8V 1180
5R 8V 1180
118.0
118.0
118.0
3R 8V 2120
4R 8V 2120
5R 8V 2120
212.0
212.0
212.0
3R 8V 3700
4R 8V 3700
5R 8V 3700
370.0
370.0
370.0
3R 8V 1250
4R 8V 1250
5R 8V 1250
125.0
125.0
125.0
3R 8V 2240
4R 8V 2240
5R 8V 2240
224.0
224.0
224.0
3R 8V 4000
4R 8V 4000
5R 8V 4000
400.0
400.0
400.0
3R 8V 1320
4R 8V 1320
5R 8V 1320
132.0
132.0
132.0
3R 8V 2360
4R 8V 2360
5R 8V 2360
236.0
236.0
236.0
3R 8V 4250
4R 8V 4250
5R 8V 4250
425.0
425.0
425.0
300.0
300.0
300.0
300.0
3R 8V 1400
4R 8V 1400
5R 8V 1400
140.0
140.0
140.0
3R 8V 2500
4R 8V 2500
5R 8V 2500
250.0
250.0
250.0
3R 8V 4500
4R 8V 4500
5R 8V 4500
450.0
450.0
450.0
2R 5V 3150
3R 5V 3150
4R 5V 3150
5R 5V 3150
315.0
315.0
315.0
315.0
3R 8V 1500
4R 8V 1500
5R 8V 1500
150.0
150.0
150.0
3R 8V 2650
4R 8V 2650
5R 8V 2650
265.0
265.0
265.0
3R 8V 4750
4R 8V 4750
5R 8V 4750
475.0
475.0
475.0
180.0
180.0
180.0
180.0
2R 5V 3350
3R 5V 3350
4R 5V 3350
5R 5V 3350
335.0
335.0
335.0
335.0
3R 8V 1600
4R 8V 1600
5R 8V 1600
160.0
160.0
160.0
3R 8V 2800
4R 8V 2800
5R 8V 2800
280.0
280.0
280.0
3R 8V 5000
4R 8V 5000
5R 8V 5000
500.0
500.0
500.0
2R 5V 1900
3R 5V 1900
4R 5V 1900
5R 5V 1900
190.0
190.0
190.0
190.0
2R 5V 3550
3R 5V 3550
4R 5V 3550
5R 5V 3550
355.0
355.0
355.0
355.0
3R 8V 1700
4R 8V 1700
5R 8V 1700
170.0
170.0
170.0
3R 8V 3000
4R 8V 3000
5R 8V 3000
300.0
300.0
300.0
106.0
106.0
106.0
106.0
2R 5V 2000
3R 5V 2000
4R 5V 2000
5R 5V 2000
200.0
200.0
200.0
200.0
112.0
112.0
112.0
112.0
2R 5V 2120
3R 5V 2120
4R 5V 2120
5R 5V 2120
212.0
212.0
212.0
212.0
(Inch)
(Inch)
(Inch)
(Inch)
(Inch)
(Inch)
!
NEW
• Designed for extra heavy duty applications.
• Aramid cords with bareback fablic for clutch effect.
• Reduced Belt stretch under heavy loads and torque.
• High working loads, high shock loads.
Product Code
Belt
No.
2R5VK630
3R5VK630
4R5VK630
5R5VK630
Outside
Length
(Inch)
Belt
No.
63.0
63.0
63.0
63.0
2R5VK900
3R5VK900
4R5VK900
5R5VK900
2R5VK670
3R5VK670
4R5VK670
5R5VK670
67.0
67.0
67.0
67.0
2R5VK710
3R5VK710
4R5VK710
5R5VK710
Outside
Length
(Inch)
Belt
No.
5VK
Outside
Length
(Inch)
3R 5VK 1600
Belt
No.
90.0
90.0
90.0
90.0
2R5VK1320
3R5VK1320
4R5VK1320
5R5VK1320
132.0
132.0
132.0
132.0
2R5VK2000
3R5VK2000
4R5VK2000
5R5VK2000
2R5VK950
3R5VK950
4R5VK950
5R5VK950
95.0
95.0
95.0
95.0
2R5VK1400
3R5VK1400
4R5VK1400
5R5VK1400
140.0
140.0
140.0
140.0
71.0
71.0
71.0
71.0
2R5VK1000
3R5VK1000
4R5VK1000
5R5VK1000
100.0
100.0
100.0
100.0
2R5VK1500
3R5VK1500
4R5VK1500
5R5VK1500
2R5VK750
3R5VK750
4R5VK750
5R5VK750
75.0
75.0
75.0
75.0
2R5VK1060
3R5VK1060
4R5VK1060
5R5VK1060
106.0
106.0
106.0
106.0
2R5VK800
3R5VK800
4R5VK800
5R5VK800
80.0
80.0
80.0
80.0
2R5VK1120
3R5VK1120
4R5VK1120
5R5VK1120
2R5VK850
3R5VK850
4R5VK850
5R5VK850
85.0
85.0
85.0
85.0
2R5VK870
3R5VK870
4R5VK870
5R5VK870
87.0
87.0
87.0
87.0
Outside
Length
(Inch)
3R = 3 Ribs
3V = Cross Section
1600 = Outside Length,
160 inches
Belt
No.
Outside
Length
(Inch)
200.0
200.0
200.0
200.0
2R5VK2800
3R5VK2800
4R5VK2800
5R5VK2800
280.0
280.0
280.0
280.0
2R5VK2030
3R5VK2030
4R5VK2030
5R5VK2030
203.0
203.0
203.0
203.0
2R5VK3000
3R5VK3000
4R5VK3000
5R5VK3000
300.0
300.0
300.0
300.0
150.0
150.0
150.0
150.0
2R5VK2120
3R5VK2120
4R5VK2120
5R5VK2120
212.0
212.0
212.0
212.0
2R5VK3150
3R5VK3150
4R5VK3150
5R5VK3150
315.0
315.0
315.0
315.0
2R5VK1600
3R5VK1600
4R5VK1600
5R5VK1600
160.0
160.0
160.0
160.0
2R5VK2240
3R5VK2240
4R5VK2240
5R5VK2240
224.0
224.0
224.0
224.0
2R5VK3350
3R5VK3350
4R5VK3350
5R5VK3350
335.0
335.0
335.0
335.0
112.0
112.0
112.0
112.0
2R5VK1700
3R5VK1700
4R5VK1700
5R5VK1700
170.0
170.0
170.0
170.0
2R5VK2360
3R5VK2360
4R5VK2360
5R5VK2360
236.0
236.0
236.0
236.0
2R5VK3550
3R5VK3550
4R5VK3550
5R5VK3550
355.0
355.0
355.0
355.0
2R5VK1180
3R5VK1180
4R5VK1180
5R5VK1180
118.0
118.0
118.0
118.0
2R5VK1800
3R5VK1800
4R5VK1800
5R5VK1800
180.0
180.0
180.0
180.0
2R5VK2500
3R5VK2500
4R5VK2500
5R5VK2500
250.0
250.0
250.0
250.0
2R5VK1250
3R5VK1250
4R5VK1250
5R5VK1250
125.0
125.0
125.0
125.0
2R5VK1900
3R5VK1900
4R5VK1900
5R5VK1900
190.0
190.0
190.0
190.0
2R5VK2650
3R5VK2650
4R5VK2650
5R5VK2650
265.0
265.0
265.0
265.0
39
Belt
No.
40
Outside
Length
(Inch)
Belt
No.
Outside
Length
(Inch)
Belt
No.
8VK
Outside
Length
(Inch)
Belt
No.
Outside
Length
(Inch)
Belt
No.
Outside
Length
(Inch)
2R8VK1000
3R8VK1000
4R8VK1000
5R8VK1000
100.0
100.0
100.0
100.0
2R8VK1500
3R8VK1500
4R8VK1500
5R8VK1500
150.0
150.0
150.0
150.0
2R8VK2240
3R8VK2240
4R8VK2240
5R8VK2240
224.0
224.0
224.0
224.0
2R8VK3350
3R8VK3350
4R8VK3350
5R8VK3350
335.0
335.0
335.0
335.0
2R8VK5000
3R8VK5000
4R8VK5000
5R8VK5000
500.0
500.0
500.0
500.0
2R8VK1060
3R8VK1060
4R8VK1060
5R8VK1060
106.0
106.0
106.0
106.0
2R8VK1600
3R8VK1600
4R8VK1600
5R8VK1600
160.0
160.0
160.0
160.0
2R8VK2360
3R8VK2360
4R8VK2360
5R8VK2360
236.0
236.0
236.0
236.0
2R8VK3550
3R8VK3550
4R8VK3550
5R8VK3550
355.0
355.0
355.0
355.0
2R8VK5600
3R8VK5600
4R8VK5600
5R8VK5600
560.0
560.0
560.0
560.0
2R8VK1120
3R8VK1120
4R8VK1120
5R8VK1120
112.0
112.0
112.0
112.0
2R8VK1700
3R8VK1700
4R8VK1700
5R8VK1700
170.0
170.0
170.0
170.0
2R8VK2500
3R8VK2500
4R8VK2500
5R8VK2500
250.0
250.0
250.0
250.0
2R8VK3750
3R8VK3750
4R8VK3750
5R8VK3750
375.0
375.0
375.0
375.0
2R8VK5900
3R8VK5900
4R8VK5900
5R8VK5900
590.0
590.0
590.0
590.0
2R8VK1180
3R8VK1180
4R8VK1180
5R8VK1180
118.0
118.0
118.0
118.0
2R8VK1800
3R8VK1800
4R8VK1800
5R8VK1800
180.0
180.0
180.0
180.0
2R8VK2650
3R8VK2650
4R8VK2650
5R8VK2650
265.0
265.0
265.0
265.0
2R8VK4000
3R8VK4000
4R8VK4000
5R8VK4000
400.0
400.0
400.0
400.0
2R8VK6000
3R8VK6000
4R8VK6000
5R8VK6000
600.0
600.0
600.0
600.0
2R8VK1250
3R8VK1250
4R8VK1250
5R8VK1250
125.0
125.0
125.0
125.0
2R8VK1900
3R8VK1900
4R8VK1900
5R8VK1900
190.0
190.0
190.0
190.0
2R8VK2800
3R8VK2800
4R8VK2800
5R8VK2800
280.0
280.0
280.0
280.0
2R8VK4250
3R8VK4250
4R8VK4250
5R8VK4250
425.0
425.0
425.0
425.0
2R8VK6600
3R8VK6600
4R8VK6600
5R8VK6600
660.0
660.0
660.0
660.0
2R8VK1320
3R8VK1320
4R8VK1320
5R8VK1320
132.0
132.0
132.0
132.0
2R8VK2000
3R8VK2000
4R8VK2000
5R8VK2000
200.0
200.0
200.0
200.0
2R8VK3000
3R8VK3000
4R8VK3000
5R8VK3000
300.0
300.0
300.0
300.0
2R8VK4500
3R8VK4500
4R8VK4500
5R8VK4500
450.0
450.0
450.0
450.0
2R8VK1400
3R8VK1400
4R8VK1400
5R8VK1400
140.0
140.0
140.0
140.0
2R8VK2120
3R8VK2120
4R8VK2120
5R8VK2120
212.0
212.0
212.0
212.0
2R8VK3150
3R8VK3150
4R8VK3150
5R8VK3150
315.0
315.0
315.0
315.0
2R8VK4750
3R8VK4750
4R8VK4750
5R8VK4750
475.0
475.0
475.0
475.0
Maxstar Wedge Supreme®®
Narrow Cogged Banded
• Designed for tough applications where multiple drive belts are subject to heavy
shock and pulsating loads.
• Banding prevents belt whip, belt turnover, vibration and jumping off that may occur
with single belts in multiple drive applications.
• Frictional and wedging principles of the V-Belt drive apply and prevent slip at low
bearing loads.
Belt
No.
2R3VX375
3R3VX375
4R3VX375
5R3VX375
Outside
Length
(Inch)
3VK
Product Code
15.9mm
Belt 5/8 inch
Outside
No.
Length
(Inch)
37.5
37.5
37.5
37.5
2R3VX600
3R3VX600
5VX
4R3VX600
5R3VX600
60.0
60.0
60.0
60.0
2R3VX400
3R3VX400
4R3VX400
5R3VX400
40.0
40.0
40.0
40.0
2R3VX630
3R3VX630
4R3VX630
5R3VX630
63.0
63.0
63.0
63.0
2R3VX425
3R3VX425
4R3VX425
5R3VX425
42.5
42.5
42.5
42.5
2R3VX670
3R3VX670
4R3VX670
5R3VX670
67.0
67.0
67.0
67.0
2R3VX450
3R3VX450
4R3VX450
5R3VX450
45.0
45.0
45.0
45.0
2R3VX710
3R3VX710
4R3VX710
5R3VX710
71.0
71.0
71.0
71.0
2R3VX475
3R3VX475
4R3VX475
5R3VX475
47.5
47.5
47.5
47.5
2R3VX750
3R3VX750
4R3VX750
5R3VX750
75.0
75.0
75.0
75.0
2R3VX490
3R3VX490
4R3VX490
5R3VX490
49.0
49.0
49.0
49.0
2R3VX800
3R3VX800
4R3VX800
5R3VX800
80.0
80.0
80.0
80.0
2R3VX500
3R3VX500
4R3VX500
5R3VX500
50.0
50.0
50.0
50.0
2R3VX850
3R3VX850
4R3VX850
5R3VX850
85.0
85.0
85.0
85.0
2R3VX530
3R3VX530
4R3VX530
5R3VX530
53.0
53.0
53.0
53.0
2R3VX900
3R3VX900
4R3VX900
5R3VX900
90.0
90.0
90.0
90.0
2R3VX560
3R3VX560
4R3VX560
5R3VX560
56.0
56.0
56.0
56.0
2R3VX950
3R3VX950
4R3VX950
5R3VX950
95.0
95.0
95.0
95.0
Belt
No.
2R5VX500
3R5VX500
5VX
4R 5V X 1320
Outside
Length
(Inch)
50.0
50.0
2R5VX530
3R5VX530
53.0
53.0
2R5VX560
3R5VX560
56.0
56.0
2R5VX600
3R5VX600
60.0
60.0
2R5VX630
3R5VX630
63.0
63.0
2R5VX670
3R5VX670
67.0
67.0
2R5VX710
3R5VX710
71.0
71.0
2R5VX750
3R5VX750
75.0
75.0
2R5VX800
3R5VX800
80.0
80.0
2R5VX850
3R5VX850
85.0
85.0
2R5VX900
3R5VX900
90.0
90.0
2R5VX950
3R5VX950
95.0
95.0
Belt
No.
5VK
2R5VX1000
3R5VX1000
5VX
4R5VX1000
5R5VX1000
Outside
Length
(Inch)
100.0
100.0
13.5mm
17/32
100.0 inch
100.0
4R = 4 Ribs
5V = Cross Section
X = Rawedge Cogged Construction
Belt
No.
2R5VX1700
3R5VX1700
4R5VX1700
5R5VX1700
Outside
Length
(Inch)
170.0
170.0
170.0
170.0
2R5VX1060
3R5VX1060
4R5VX1060
5R5VX1060
106.0
106.0
106.0
106.0
2R5VX1800
3R5VX1800
4R5VX1800
5R5VX1800
180.0
180.0
180.0
180.0
2R5VX1120
3R5VX1120
4R5VX1120
5R5VX1120
112.0
112.0
112.0
112.0
2R5VX1900
3R5VX1900
4R5VX1900
5R5VX1900
190.0
190.0
190.0
190.0
2R5VX1180
3R5VX1180
4R5VX1180
5R5VX1180
118.0
118.0
118.0
118.0
2R5VX2000
3R5VX2000
4R5VX2000
5R5VX2000
200.0
200.0
200.0
200.0
2R5VX1250
3R5VX1250
4R5VX1250
5R5VX1250
125.0
125.0
125.0
125.0
2R5VX1320
3R5VX1320
4R5VX1320
5R5VX1320
132.0
132.0
132.0
132.0
2R5VX1400
3R5VX1400
4R5VX1400
5R5VX1400
140.0
140.0
140.0
140.0
2R5VX1500
3R5VX1500
4R5VX1500
5R5VX1500
150.0
150.0
150.0
150.0
41
FHP V-Belt
• Designed for light duty, fractional horsepower drives.
• Capable of handling drives with backside idler.
• External wrapping provides a smooth and quiet operation with minimum vibration.
• Heat and oil resistant, static conductive.
12.7mm
1/2in
9.5mm
3/8in
Belt
No.
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
42
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
Outside
Length
(Inch)
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
7.9mm
5/16in
4L
5.5mm
7/32in
3L
3L
Belt
No.
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
690
700
710
720
730
740
Product Code
16.5mm
21/32in
Outside
Length
(Inch)
54.0
55.0
56.0
57.0
58.0
59.0
60.0
61.0
62.0
63.0
64.0
65.0
66.0
67.0
68.0
69.0
70.0
71.0
72.0
73.0
74.0
5L
Belt
No.
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
4L
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
590
4L = Cross Section
4L 380
9.5mm
3/8in
Outside
Length
(Inch)
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
4L
Belt
No.
Outside
Length
4L 600
4L 610
4L 620
4L 630
4L 640
4L 650
4L 660
4L 670
4L 680
4L 690
4L 700
4L 710
4L 720
4L 730
4L 740
4L 750
4L 760
4L 770
4L 780
4L 790
4L 800
4L 810
4L 820
4L 830
4L 840
4L 850
4L 860
4L 870
4L 880
4L 890
4L 900
4L 910
4L 920
4L 930
4L 940
4L 950
4L 960
4L 970
4L 980
4L 990
4L 1000
60.0
61.0
62.0
63.0
64.0
65.0
66.0
67.0
68.0
69.0
70.0
71.0
72.0
73.0
74.0
75.0
76.0
77.0
78.0
79.0
80.0
81.0
82.0
83.0
84.0
85.0
86.0
87.0
88.0
89.0
90.0
91.0
92.0
93.0
94.0
95.0
96.0
97.0
98.0
99.0
100.0
(Inch)
Belt
No.
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
5L
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
Outside
Length
(Inch)
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
61.0
62.0
63.0
64.0
65.0
66.0
5L
Belt
No.
5L 670
5L 680
5L 690
5L 700
5L 710
5L 720
5L 730
5L 740
5L 750
5L 760
5L 770
5L 780
5L 790
5L 800
5L 810
5L 820
5L 830
5L 840
5L 850
5L 860
5L 870
5L 880
5L 890
5L 900
5L 910
5L 920
5L 930
5L 940
5L 950
5L 960
5L 970
5L 980
5L 990
5L 1000
Outside
Length
(Inch)
67.0
68.0
69.0
70.0
71.0
72.0
73.0
74.0
75.0
76.0
77.0
78.0
79.0
80.0
81.0
82.0
83.0
84.0
85.0
86.0
87.0
88.0
89.0
90.0
91.0
92.0
93.0
94.0
95.0
96.0
97.0
98.0
99.0
100.0
MBL Super KB®
Premium FHP Belt
• For severe operating conditions where light duty FHP belts may stretch or pull apart
due to heavy shock loads.
• Aramid fiber is used in the tensile cord for length stability.
• Provide greater horsepower than light duty FHP belts.
• Special outer covering designed for smooth clutching and backside idler applications.
• Resist temperatures extremes, high humidity, oil and cracking.
Product Code
3LK
Belt
No.
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
16.5mm
21/32in
12.7mm
1/2in
9.5mm
3/8in
4LK
5.5mm
7/32in
Outside
Length
(Inch)
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
3LK
Belt
No.
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
3LK
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
4L K 380
Outside
Length
(Inch)
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
61.0
62.0
63.0
9.5mm
3/8in
5LK
7.9mm
5/16in
Belt
No.
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
4LK
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
4L = Cross Section
K = Aramid Fiber Cord
Outside
Length
(Inch)
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
4LK
Belt
No.
Outside
Length
4LK 590
4LK 600
4LK 610
4LK 620
4LK 630
4LK 640
4LK 650
4LK 660
4LK 670
4LK 680
4LK 690
4LK 700
4LK 710
4LK 720
4LK 730
4LK 740
4LK 750
4LK 760
4LK 770
4LK 780
4LK 790
4LK 800
4LK 810
4LK 820
4LK 830
4LK 840
4LK 850
4LK 860
4LK 870
4LK 880
4LK 890
4LK 900
4LK 910
4LK 920
4LK 930
4LK 940
4LK 950
4LK 960
4LK 970
4LK 980
4LK 990
4LK 1000
59.0
60.0
61.0
62.0
63.0
64.0
65.0
66.0
67.0
68.0
69.0
70.0
71.0
72.0
73.0
74.0
75.0
76.0
77.0
78.0
79.0
80.0
81.0
82.0
83.0
84.0
85.0
86.0
87.0
88.0
89.0
90.0
91.0
92.0
93.0
94.0
95.0
96.0
97.0
98.0
99.0
100.0
(Inch)
Belt
No.
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
5LK
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
670
Outside
Length
(Inch)
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
61.0
62.0
63.0
64.0
65.0
66.0
67.0
5LK
Belt
No.
5LK 680
5LK 690
5LK 700
5LK 710
5LK 720
5LK 730
5LK 740
5LK 750
5LK 760
5LK 770
5LK 780
5LK 790
5LK 800
5LK 810
5LK 820
5LK 830
5LK 840
5LK 850
5LK 860
5LK 870
5LK 880
5LK 890
5LK 900
5LK 910
5LK 920
5LK 930
5LK 940
5LK 950
5LK 960
5LK 970
5LK 980
5LK 990
5LK 1000
Outside
Length
(Inch)
68.0
69.0
70.0
71.0
72.0
73.0
74.0
75.0
76.0
77.0
78.0
79.0
80.0
81.0
82.0
83.0
84.0
85.0
86.0
87.0
88.0
89.0
90.0
91.0
92.0
93.0
94.0
95.0
96.0
97.0
98.0
99.0
100.0
43
Narrow V-Belt for
DIN 7753/ISO4184
DIN 7753/ISO4184
Suitable for energy-saving / compact design.
Reduces maintenance costs.
Product Code
16.3mm
22.0mm
12.7mm
9.7mm
Standard Belt Sizes
Pitch Length
LW (mm)
44
487
512
562
587
612
630
637
650
655
662
665
670
687
690
710
722
737
750
760
762
772
787
800
812
825
835
837
850
862
875
885
887
900
912
925
937
940
950
962
987
1000
1005
1010
1012
1024
1037
1047
1060
1077
1080
1087
1100
1110
SPZ
Pitch Length Pitch Length
LW (mm)
LW (mm)
1112
1120
1137
1140
1162
1180
1187
1200
1202
1212
1222
1237
1250
1262
1270
1282
1287
1300
1312
1320
1337
1340
1347
1362
1387
1400
1412
1420
1437
1462
1487
1500
1512
1520
1537
1560
1562
1587
1600
1612
1637
1662
1687
1700
1737
1762
1787
1800
1812
1837
1862
1187
1900
1937
1987
2000
2030
2037
2050
2060
2082
2087
2120
2137
2150
2160
2187
2200
2240
2262
2280
2287
2300
2337
2360
2387
2400
2410
2437
2450
2487
2500
2540
2580
2600
2637
2650
2670
2687
2690
2700
2712
2720
2737
2760
2800
2840
2900
3000
3050
3070
3150
3170
3200
3250
3350
18.0mm
13.0mm
10.0mm
8.0mm
Pitch Length
LW (mm)
3450
3550
3660
3750
4000
4500
Pitch Length
LW (mm)
732
735
742
757
760
782
800
803
832
850
857
860
882
885
900
907
932
950
957
967
982
1000
1007
1032
1057
1060
1082
1090
1107
1120
1132
1157
1180
1182
1200
1207
1210
1232
1235
1250
1257
1272
1282
1295
1300
1307
1320
1332
1357
1367
1382
1385
1400
SPA
LW (mm)
LW (mm)
1407
1410
1425
1432
1457
1482
1485
1500
1507
1532
1557
1582
1600
1617
1632
1657
1682
1700
1707
1732
1757
1782
1785
1800
1807
1832
1837
1857
1882
1900
1907
1932
1957
1982
2000
2032
2057
2082
2100
2120
2132
2157
2182
2200
2207
2232
2240
2260
2282
2300
2307
2330
2332
SPB
SPC
: Available sizes for raw edge cogged belt SPZX, SPAX, SPBX, SPCX.
2360
2373
2382
2407
2410
2432
2482
2500
2532
2550
2568
2582
2600
2607
2632
2650
2682
2732
2773
2782
2800
2832
2847
2850
2882
2900
2932
2962
2982
3000
3032
3082
3132
3150
3182
3282
3350
3382
3482
3500
3550
3650
3750
3870
4000
4120
4250
4300
4500
4600
4750
4865
5000
Pitch Length
LW (mm)
1250
1260
1320
1340
1400
1410
1500
1510
1590
1600
1690
1700
1750
1800
1850
1900
1950
2000
2020
2030
2060
2120
2131
2137
2150
2180
2200
2240
2264
2280
2300
2310
2320
2330
2360
2390
2391
2410
2425
2430
2450
2473
2500
2518
2522
2530
2550
2575
2580
2600
2640
2650
2670
LW (mm)
LW (mm)
2680
2700
2720
2750
2800
2820
2840
2900
2990
3000
3070
3150
3170
3175
3200
3238
3250
3280
3328
3340
3350
3400
3412
3425
3450
3500
3550
3650
3675
3700
3750
3770
3800
3850
3870
3875
4000
4060
4100
4120
4250
4260
4296
4310
4318
4370
4500
4560
4600
4620
4720
4750
4820
4870
5000
5070
5300
5380
5500
5600
5680
5800
5990
6000
6300
6340
6700
6720
up to
10000
Pitch Length
LW (mm)
2000
2120
2240
2280
2335
2360
2400
2413
2445
2500
2550
2580
2600
2650
2700
2720
2750
2770
2800
2840
2900
2950
3000
3050
3100
3150
3200
3220
3320
3350
3375
3420
3430
3450
3500
3520
3550
3600
3620
3670
3700
3750
3770
3800
3810
3970
4000
4050
4100
4200
4250
4300
4350
Pitch Length
LW (mm)
4380
4400
4420
4445
4450
4500
4530
4650
4720
4750
4850
4900
4970
5000
5030
5070
5200
5300
5330
5400
5500
5600
5700
6000
6200
6300
6480
6500
6700
up to
12500
Double Angle Belt
• For drives where power must be transmitted by both the top and bottom of the belt.
• Belts flex equally well in both directions for positive pulley contact.
• Good for serpentine or reverse bend drives.
• Oil and heat resistant, static conductive.
Product Code
AA
BB
CC
Belt
No.
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
51
55
60
62
64
66
68
70
73
75
78
Outside
Length
(Inch)
54.4
58.4
63.4
65.4
67.4
69.4
71.4
73.4
76.4
78.4
81.4
AA
Belt
No.
AA 80
AA 84
AA 85
AA 90
AA 92
AA 96
AA 105
AA 107
AA 112
AA 120
AA 128
Outside
Length
(Inch)
83.4
87.4
88.4
93.4
95.4
99.4
108.4
110.4
115.4
123.4
131.4
TW
1/2 in - 12.7 mm
21/32 in - 16.7 mm
7/8 in - 22.2 mm
Belt
No.
Outside
Length
BB 43
BB 45
BB 51
BB 53
BB 54
BB 55
BB 60
BB 68
BB 71
BB 72
BB 73
BB 74
BB 75
BB 76
BB 77
BB 78
BB 81
BB 83
BB 85
BB 90
BB 92
BB 93
BB 94
BB 95
BB 96
BB 97
BB 103
BB 105
BB 107
BB 108
BB 111
BB 112
BB 116
BB 117
BB 118
BB 119
BB 120
BB 123
BB 124
BB 128
BB 129
BB 130
BB 136
BB 140
BB 144
47.6
49.6
55.6
57.6
58.6
59.6
64.6
72.6
75.6
76.6
77.6
78.6
79.6
80.6
81.6
82.6
85.6
87.6
89.6
94.6
96.6
97.6
98.6
99.6
100.6
101.6
107.6
109.6
111.6
112.6
115.6
116.6
120.6
121.6
122.6
123.6
124.6
127.6
128.6
132.6
133.6
134.6
140.6
144.6
148.6
(Inch)
AA 105
AA = Double Angle A Section
105 = Nominal Length, 105 inches
H
13/32 in - 10.3 mm
17/32 in - 13.5 mm
11/16 in - 17.5 mm
BB
Belt
No.
Outside
Length
Belt
No.
Outside
Length
BB 155
BB 157
BB 158
BB 162
BB 168
BB 169
BB 173
BB 180
BB 182
BB 190
BB 195
BB 210
BB 225
BB 226
BB 228
BB 230
BB 240
BB 255
BB 267
BB 270
BB 273
BB 277
BB 278
BB 285
BB 300
BB 330
159.6
161.6
162.6
166.6
172.6
173.6
177.6
184.6
186.6
194.6
199.6
214.6
228.1
229.1
231.1
233.1
243.1
258.1
270.1
273.1
276.1
280.1
281.1
288.1
303.1
333.1
CC 75
CC 81
CC 85
CC 90
CC 96
CC 105
CC 112
CC 119
CC 120
CC 125
CC 128
CC 136
CC 144
CC 148
CC 158
81.4
87.4
91.4
96.4
102.4
111.4
118.4
125.4
126.4
131.4
134.4
142.4
150.4
154.4
164.4
(Inch)
(Inch)
CC
Belt
No.
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
162
173
180
195
210
221
225
240
255
270
300
330
360
390
420
Outside
Length
(Inch)
168.4
179.4
186.4
201.4
216.4
227.4
229.4
244.4
259.4
274.4
304.4
334.4
364.4
394.4
424.4
45
Ribstar®® Belt G (Rubber V-Ribbed Belt)
Transmission Belt
This belt combines the properties of the V-Belt’s high power
transmission capability and the Flat Belt flexibility.
•
•
•
•
•
High-efficiency operation at high speed.
It can be used on a small diameter pulley because of its enhanced flexibility.
Excellent heat resistance and abrasion resistance.
Compact design application.
Little belt vibration.
(Example)
Product Code
Cross-Sectional Diagram
For PK type, the metric system is used
• Effective Length: Effective outer perimeter
(Unit: mm)
Belt Type
Sign
a
b
P
J
L
2.34XN
3.80
2.34
40
4.70XN
7.50
4.70
40
PK
3.56XN
5.00
3.56
40
• N: No of Ribs
Standard Belt Sizes for Industrial RIBSTAR Belt
Product
Code
180
190
200
210
220
235
240
245
250
260
270
280
290
300
310
315
320
330
340
345
350
46
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
Effective
Length (inch)
18.0
19.0
20.0
21.0
22.0
23.5
24.0
24.5
25.0
26.0
27.0
28.0
29.0
30.0
31.0
31.5
32.0
33.0
34.0
34.5
35.0
J
Product
Code
360
370
375
380
390
400
410
420
430
440
450
460
480
490
510
530
550
580
610
650
730
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
Effective
Length (inch)
36.0
37.0
37.5
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
48.0
49.0
51.0
53.0
55.0
58.0
61.0
65.0
73.0
Product
Code
345
350
355
360
370
375
380
385
390
395
400
405
410
415
420
425
430
450
460
480
500
540
560
565
570
600
615
635
650
655
675
680
690
725
750
765
780
815
* 835
* 845
* 865
* 880
* 915
* 930
* 975
* 990
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Effective
Length (inch)
34.5
35.0
35.5
36.0
37.0
37.5
38.0
38.5
39.0
39.5
40.0
40.5
41.0
41.5
42.0
42.5
43.0
45.0
46.0
48.0
50.0
54.0
56.0
56.5
57.0
60.0
61.5
63.5
65.0
65.5
67.5
68.0
69.0
72.5
75.0
76.5
78.0
81.5
83.5
84.5
86.5
88.0
91.5
93.0
97.5
99.0
L
* signifies made-to-order size.
Product
Code
* 1065 L
* 1120 L
* 1150 L
Effective
Length (inch)
106.5
112.0
115.0
PK
Product
Code
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
600
615
630
650
690
710
730
750
775
800
825
850
875
900
925
950
975
1000
1030
1060
1090
1120
1150
1180
1220
1250
1280
1320
1360
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2120
2240
2360
2500
2650
2800
3000
Effective
Length (mm)
600
615
630
650
690
710
730
750
775
800
825
850
875
900
925
950
975
1,000
1,030
1,060
1,090
1,120
1,150
1,180
1,220
1,250
1,280
1,320
1,360
1,400
1,450
1,500
1,550
1,600
1,650
1,700
1,750
1,800
1,850
1,900
1,950
2,000
2,120
2,240
2,360
2,500
2,650
2,800
3,000
Super
Supar VS® Belt (Variable Speed Belt)
Changes in speed can be accurately, smoothly and quietly transmitted from
low to high speed.
High precision and transmission efficiency as well as excellent durability.
Almost no elongation. Excellent oil, heat and lateral pressure resistance.
Specially for high performance and high quality transmission systems.
Product Code
a(mm)
30
37
12
16
22
10
12
16
20
20
b(mm)
10
12
5
6
8
5
6
8
10
12
(°)
22
22
22
22
22
22
22
22
22
22
(inch x 10)
Standard Belt Sizes
ISO Code
RMA Code
ISO Code
RMA Code
ISO Code
RMA Code
30-10-732
1922V277
37-12-855
2322V329
22-8-615
1422V235
30-10-733
1922V282
37-12-945
2322V364
22-8-625
1422V240
30-10-773
1922V298
37-12-995
2322V384
22-8-648
1422V250
30-10-783
1922V302
37-12-1030
2322V396
22-8-700
1422V270
30-10-813
1922V313
37-12-1090
2322V421
22-8-755
30-10-813
1922V314
37-12-1120
2322V434
30-10-838
1922V321
37-12-1140
30-10-863
1922V332
30-10-878
ISO Code*1
ISO Code*2
ISO Code*3
16-8-600
20-10-1600
10-5-475
16-8-625
20-10-1650
10-5-500
16-8-650
20-10-1700
10-5-525
16-8-675
20-10-1750
1422V290
10-5-550
16-8-700
20-10-1800
22-8-780
1422V300
10-5-575
16-8-725
20-10-1850
2322V441
22-8-855
1422V330
10-5-600
16-8-750
20-10-1900
37-12-1190
2322V461
22-8-880
1422V340
10-5-625
16-8-775
20-10-1950
1922V338
37-12-1240
2322V481
22-8-930
1422V360
10-5-650
16-8-800
20-10-2000
30-10-943
1922V363
37-12-1255
2322V486
22-8-1030
1422V400
10-5-675
16-8-825
20-12-750
30-10-988
1922V381
37-12-1345
2322V521
22-8-1085
1422V420
10-5-700
16-8-850
20-12-800
30-10-998
1922V386
37-12-1395
2322V541
22-8-1135
1422V440
10-5-725
16-8-875
20-12-850
30-10-1043
1922V403
37-12-1545
2322V601
22-8-1185
1422V460
10-5-750
16-8-900
20-12-900
30-10-1078
1922V417
37-12-1595
2322V621
22-8-1200
1422V466
12-6-500
16-8-925
20-12-950
30-10-1098
1922V426
37-12-1700
2322V661
22-8-1210
1422V470
12-6-525
16-8-950
20-12-1000
10-5-450
30-10-1143
1922V443
37-12-1750
2322V681
22-8-1235
1422V480
12-6-550
16-8-975
20-12-1050
30-10-1173
1922V454
37-12-1800
2322V701
22-8-1390
1422V540
12-6-575
16-8-1000
20-12-1100
30-10-1188
1922V460
37-12-1850
2322V721
22-8-1540
1422V600
12-6-600
20-10-750
20-12-1150
30-10-1248
1922V484
37-12-2055
2322V801
22-8-1690
1422V660
12-6-625
20-10-800
20-12-1200
30-10-1353
1922V526
37-12-2120
2322V826
22-8-1845
1422V720
12-6-650
20-10-850
20-12-1250
30-10-1398
1922V544
37-12-2170
2322V846
22-8-1995
1422V780
12-6-675
20-10-900
20-12-1300
30-10-1553
1922V604
37-12-2270
2322V886
12-6-700
20-10-950
20-12-1350
30-10-1618
1922V630
37-12-2360
2322V921
12-6-725
20-10-1000
20-12-1400
30-10-1663
1922V646
12-5-451
7.522V173
12-6-750
20-10-1050
20-12-1450
30-10-1708
1922V666
12-5-501
7.522V193
12-6-775
20-10-1100
20-12-1500
30-10-1758
1922V686
12-5-551
7.522V212
12-6-800
20-10-1150
20-12-1550
30-10-1813
1922V706
12-5-571
7.522V220
12-6-825
20-10-1200
20-12-1600
30-10-1848
1922V721
16-6-513
1022V196
12-6-850
20-10-1250
20-12-1650
30-10-1863
1922V726
16-6-548
1022V210
12-6-875
20-10-1300
20-12-1700
30-10-1928
1922V751
16-6-573
1022V220
12-6-900
20-10-1350
20-12-1750
30-10-1938
1922V756
16-6-578
1022V223
12-6-925
20-10-1400
20-12-1800
30-10-2068
1922V806
16-6-628
1022V247
12-6-950
20-10-1450
20-12-1850
30-10-2168
1922V846
12-6-975
20-10-1500
20-12-1900
12-6-1000
20-10-1550
20-12-1950
20-12-2000
Note 1) *1, *2, *3 are only in ISO Code.
Note 2) Please contact us for sizes beyond the standard size.
47
FLEXSTAR®® Belt
Because of its large power transmission capacity,
compact design application and cost reduction
are possible.
• Smooth and quiet operation with little vibration. Withstands operation at a
maximum speed of 60m/sec.
• Excellent heat resistance, oil resistance and antistatic properties.
• Almost no need for re-tension since the belt doesn’t stretch much.
Dimensions & Product Code
Belt Type
Thickness (mm)
Standard Belt Width (mm)
FL
10, 15, 20, 25, 30, 35, 40, 50
FM
20, 30, 40, 50, 60, 80, 100
FH
50, 75, 100, 125, 150, 175, 200
Product Code
Example
• In addition, a belt known as FLEG for transportation is also available. Belt thickness of FLEG is 1.3 mm.
Standard Belt Sizes
(mm)
Belt Length
FL
FM
FH
(mm)
Belt Length
FL
FM
FH
(mm)
Belt Length
FL
FM
FH
(mm)
Belt Length
200
560
1000
1800
224
600
1060
1900
250
630
1120
2000
280
670
1180
2240
315
710
1250
2500
355
750
1320
2800
400
800
1400
3150
450
850
1500
3550
500
900
1600
4000
530
950
1700
FL
FM
FH
Applications
General Industrial Machinery
Various fans
Blower
Various pumps
Compression machine
Pulverizer
Compressor
Mixer
Centrifuge
Various press
Mill
48
Machine Tool
Woodworks Machinery
Lathe
Router machine
NC lathe
Bandsaw
Milling machine
Chipper
Grinder
Various polishing machines
Slotter
Planer
Hobbing machine
Drilling machine
Boring machine
Shaver
Shirring machine
Power press
Friction press
Textile Machinery
Winder
Draw texturizing machine
Assemble winder
Yarn twisting machine
Twister
Various spinning and
weaving machines
Paper Manufacturing Machinery
Paper machine
Rotary paper machine
Holding feeder
Packing sorting machine
Paper tube machine
Electric Equipment
Generator
Computer
Power planer
Auto dryer
Other Kinds of Machinery
Grinding mill
Printing machine
Precision equipment
Leisure facilities
Chemical equipment
Automatic vending
machine
Money changing
machine
Copier
Paper feeder
Ticketing machine
SuPER FLEXSTAR®® Belt
SuPER FLEXSTAR® is a high tension flat belt
developed for press application for separation of
solids and liquids.
• High belt tension.
• Besides press application, it also suits applications like conveyance.
Product Code
(Example)
Top cushion: Chloroprene rubber
Cord protection material: Nylon
Adhesion rubber: Chloroprene rubber
Cord: Aramid
Cord protection material: Nylon
Bottom cushion: Chloroprene rubber
Belt Types
Belt Type
Application
a
b
Standard Width Belt Thickness
(mm)
(mm)
Standard Size
(mm)
Minimum Pulley
Diameter (mm)
Belt Edge
Finishing
Tensile Strength
(kN/cm)
FW
For high pressure
50 (25~400)*
8.4
3150, 4800
300
No rubber ears
12
FY
For high pressure,
anti-oil swelling
52
8.4
(2000~4800)*
300
With rubber ears
10
* ( ) indicates manufacturable range.
49
POLYMAX®® Belt
Transmission Belt
This is a wide-angle belt with an angle of approx. 600.
• High-speed power transmission with low vibration.
• Compact design and cost efficient.
• Maintenance-free and stretch resistance.
• Excellent weather resistance.
Cross-Sectional Sizes & Product Code
POLYMAX® Belt
Type
3M
5M
7M
3X2mm
5X3mm
7X5mm
Multi-POLYMAX® Belt
No. of Ribs
11M
11X7mm
7M
11M
5M
7M
11M
a
9.8
15.6
24.4
15.1
24.1
37.6
b
3.5
5.3
7.0
3.5
5.3
7.0
P
5.3
8.5
13.2
5.3
8.5
13.2
Dimensions
Example
Product
Code
Standard Belt Sizes
Example
* Indicates availability of Multi-POLYMAX®
3M
50
3
5M
Dimensions
(a x b)
Product
Code
2
Belt Type
5M
7M
3M180
3M185
3M190
3M195
3M200
3M206
3M212
3M218
3M224
3M230
3M425
3M437
3M450
3M465
3M475
3M487
3M500
3M515
3M530
3M545
5M280
5M290
5M300
5M307
5M315
5M325
5M335
5M345
5M355
5M365
*
*
*
*
*
*
*
*
*
*
3M236
3M243
3M250
3M258
3M265
3M272
3M280
3M290
3M300
3M307
3M560
3M580
3M600
3M615
3M630
3M650
3M670
3M690
3M710
3M730
5M375
5M387
5M400
5M412
5M425
5M437
5M450
5M462
5M475
5M487
3M315
3M325
3M335
3M345
3M355
3M365
3M375
3M387
3M400
3M412
3M750
*
*
*
*
*
*
*
*
*
*
5M500
5M515
5M530
5M545
5M560
5M580
5M600
5M615
5M630
5M650
5M
5M
5M
5M
5M
5M
5M
5M
5M
5M
670
690
710
730
750
775
800
805
825
850
710
730
750
775
800
825
850
875
900
925
*11M1700
*11M1750
*11M1800
*11M1850
*11M1900
*11M1950
*11M2000
*11M2060
*11M2120
*11M2180
* 7M1600
* 7M1650
* 7M1700
* 7M1750
* 7M1800
* 7M1850
* 7M1900
* 7M1950
* 7M2000
* 7M2060
*11M 950
*11M 975
*11M1000
*11M1030
*11M1060
*11M1090
*11M1120
*11M1150
*11M1180
*11M1220
*11M2240
*11M2300
*
*
*
*
*11M1250
*11M1280
*11M1320
*11M1360
*11M1400
*11M1450
*11M1500
*11M1550
*11M1600
*11M1650
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
500
515
530
545
560
580
600
615
630
650
*
*
*
*
*
*
*
*
*
*
* 5M 875
* 5M 900
* 5M 925
* 5M 950
* 5M 975
* 5M1000
* 5M1030
* 5M1060
* 5M1090
* 5M1120
* 7M
* 7M
* 7M
* 7M
* 7M
* 7M
* 7M
* 7M
* 7M
* 7M
670
690
710
730
750
775
800
825
850
875
*
*
*
*
*
*
*
*
*
*
*
* 7M 900
* 7M 925
* 7M 950
* 7M 975
* 7M1000
* 7M1030
* 7M1060
* 7M1090
* 7M1120
* 7M1150
5M1150
5M1180
5M1220
5M1250
5M1280
5M1320
5M1360
5M1400
5M1450
5M1500
5M1850
*
*
*
*
*
*
*
*
*
*
11M
7M1180
7M1220
7M1250
7M1280
7M1320
7M1360
7M1400
7M1450
7M1500
7M1550
7M2120
7M2180
7M2240
7M2300
*11M
*11M
*11M
*11M
*11M
*11M
*11M
*11M
*11M
*11M
Transmission Belt
MB
Belt® (Polyurethene
MB Belt
(Polyurethane V-Belt)
A small transparent belt for light-duty power transmission.
• With its high flexibility, it can be used with a small diameter pulley.
• Excellent abrasion resistance and thus clean operation.
• Small slippage operation.
• Excellent oil resistance.
Cross-Sectional Dimensions & Product Code
Belt Type
Single Cog
Top Width a (mm)
Belt Shape
MB
Height b (mm)
4.0
Angle
Example
6.0
(0 )
Product Code
40
Belt Length (Outer Circumfrence in mm)
Dimensions (a x b)
Belt Type
Standard Belt Sizes
Belt Shape
MB
Belt Type
Single Cog
Belt Length
250
260
270
280
290
340
345
350
360
365
400
410
420
430
440
500
510
520
530
540
300
310
315
320
330
370
380
385
390
395
450
460
470
480
490
550
560
640
760
Form & Dimensions of Pulley Grooves
Belt
Pulley Diameter
MB
Belt Height 4.0mm
Min. Width (W)
Min. Height (h)
16~30mm
5.4
30mm and above
5.4
Minimum Pulley Diameter
Belt Type
Minimum Pulley Diameter (mm)
Wo Reference
(min)
R
4.5
36
0
0.8
5.6
4.5
380
0.8
5.6
Single Cog
Double Cog
18
16
51
STARROPE®®/SuPER STARROPE®®/
PRENE V-ROPE/
Transmission Belt
This is an open-end polyurethane belt.
• It is easily applicable in complex power transmission systems such as
multiaxial and divertible power transmission.
• Thermal weld: Endless belt length possible.
• Excellent abrasion and oil resistance.
STARROPE®/SuPER STARROPE® Dimensions
Belt Code
d (mm)
2
3
4
5
6
7
8
9
10
12
15
Length of 1 Roll (m)
200
200
200
200
100
100
100
100
100
50
50
PRENE V-ROPE Cross-Sectional Dimensions
Dimensions
Belt Type
M
A
B
a (mm)
b (mm)
10.0
12.5
5.5
8.5
10.5
(0)
40
40
40
100
50
50
16.5
PRENE HEXAGONAL-ROPE Cross-Sectional Dimensions
Dimensions
Belt Type
a (mm)
b (mm)
( )
0
Pulley for STARROPE®/SuPER STARROPE®
AA
BB
12.5
16.5
10.0
12.5
40
40
50
50
Pulley for PRENE V-ROPE/PRENE HEXAGONAL-ROPE
Belt Type
Dimensions
b (mm)
h (mm)
M
PRENE V-ROPE
A
B
AA
BB
9.7
12.3
16.3
12.3
16.3
9.0
12.5
15.0
12.5
15.0
• Dimensions of V pulley are specified by JIS-B1854.
Pulley Dimensions for STARROPE®/SuPER STARROPE®
Dimensions
52
a (mm)
w (mm)
h (mm)
Belt Code
0.6
0.6
0.6
1.3
2.0
2.7
3.4
4.1
4.8
6.2
8.3
2.9
4.3
5.7
7.1
8.6
10.0
11.4
12.9
14.3
17.1
21.4
3.0
5.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
15.0
18.0
Transmission Belt
Flat
Belt
Flat Belt
This is a high-quality flat belt made from premium fabric and synthetic rubber.
There is very little belt shrinkage.
Excellent flex resistance.
Heat, water and oil resistance.
• For textile and agricultural machines.
Product Lineup
JIS 1st Class
Equivalent
JIS 2nd Class
Equivalent
Flat Belt
JIS 3rd Class
Equivalent
20mm
2P
25mm
90mm
100mm
3P
H•P
38mm
63mm
75mm
H•P
H•P
500mm
Side / core fabric : red-brown
Tape color : green
Mark color : green
4P
Applicable for lifter with its stretch resistant.
For LA, LB, LC types, it is possible to add V rails.
5P
Covered by canvas, this belt has a nonsticky surface. Single
sided belt is manufactured only in cut edge type whereas double
sided belt can be supplied in both cut and round edge type.
6P
7P
8P
P
P
H
H•P
H
H
H
350mm
Cut Edge Type
ECHO®
H•P
H
H
400mm
Side / core fabric : red-brown
Tape color : green
Mark color : green
H
H•P
200mm
300mm
Round Edge Type
HARBOuR®
H•P
H
250mm
Side / core fabric : yellow-brown
Edge adhesive : red
Mark color : brown
H•P
H•P
H•P
150mm
Cut Edge Type
PIONEER®
H•P
125mm
175mm
Side / core fabric : yellow-brown
Tape color : brown
Mark color : orange
H•P
30mm
50mm
Round Edge Type
PORT®
Canvas surface
specification
Standard Sizes for Round Edge Products
No. of Plies
Side / core fabric : white
Tape color : light green
Mark color : brown
DRY FLEX®
For Lifter
Others
Belt Width
Round Edge Type
special PORT®
H
H
H
H
H
H•P
H•P
H•P
H
P
H•P
P
H
H
H
H•P
P
P
P
P
600mm
• H: HARBOUR® P: PORT®
• Made-to-order for cut edge type (PIONEER®, ECHO®), DRY FLEX® and Canvas surface types.
• A lot for made-to-order items is 100m.
53
54
56
57
-22 F (-30 C)
176 F (80 C)
59
60
MBL (uSA) CORPORATION
MITSUBOSHI BELTING LTD. GROUP
601 Dayton Road, Ottawa, IL 61350
Phone: (815) 434-1282 • Toll Free Call: 1-877-625-7832 or
1-877-MBL-PTDB (Power Transmission Drive Belt)
Fax: (815) 434-2897 • Toll Free Fax: 1-800-782-7625 or 1-800-STARMBL
www.mblusa.com
The information contained herein is for informational purposes only, and does not enlarge, amend or
imply any warranty other than provided by the manufacturer with the product. Any use of the
product not in conformance with the manufacturer’s instruction may be dangerous.
(V6320201111US 1 67834)
Printed in the U.S.A.

FLEXSTAR® Belt - MBL(USA) Corporation

Transcription

Similar documents

English

GIGA TORQUE GX Timing Belt Design Manual

pdf-download - Lehrstuhl für Statistik und empirische