Western - Mill Supply

Transcription

NEW
Heavy-Duty Municipal
Plow Parts - Pages 56-59
• Bonnell
• Gledhill
• Good Roads
• Henderson
• Henke
• Valk
•Conveyor Chains
•Spreader Motors
•Bearings
•Hitch Assemblies
•Hydraulic Cylinders
MillSupply.com
• STEEL PLOWS - STEEL FRAME AND STEEL SHEETING
• POLY PLOWS - STEEL FRAME WITH PLASTIC SHEETING
Plow Xtendor
Index of Parts for
Western Plows
Cutting Edges, Back Drags.......33
Blade Guides, Plow Hardware
Paint, & Fluids .........................34
Reduces blade changes
up to 400% due to the
carbide matrix wear edge.
Cylinders, Hoses, Fittings &
Shoes.......................................35
153-0125 - Plow Guard Xtendor, Prepunched w/1/2" square holes. Fits smaller
Western and Fisher Plows $154.85/pr
153-0127 - Plow Guard Xtendor, Prepunched w/5/8" square holes. Fits Western
Pro Plus plows
$154.85/pr
Solenoids & Joystick.................36
Hydraulic Pump Parts..........37-42
"A" Frames and Quadrants for Western UnimountTM Type Plows UnimountTM "A" Frames for
Standard and Pro Plow
1
UnimountTM Quadrants for
Standard and Pro Plow
3
4
5
A
2
10
7
11
LOC
PART NO.
DESCRIPTION
REPLACES OEM PRICE
1 256-2891 A Frame for UnimountTM Standard Plow 61891
$337.34
Fits steel and poly plows ("A" Dim: 28-5/8")
2256-2345 A Frame for UnimountTM Steel and Poly Pro Plow61345$367.20
w/3 trip springs ("A" Dim: 31-5/8")
1 256-2581 A Frame for UnimountTM Steel and Poly Pro Plow63581 $521.52
w/4 trip springs
3 W-60324 A Frame for Conventional & Pro Plow, 7-1/2' to 9' 60324
$489.68
Used with 256-2036 & 256-2328 Quadrant ("A" Dim: 31-1/2")
60036
$451.00
4 256-2036 Quadrant for Unimount TM & Conventional except Sub Compact Standard Steel Plow w/2 trip springs.
$495.00
5 256-2328 Quadrant for Conventional & UnimountTM for60328
LOC
Steel and Poly Pro Plow w/3 trip springs
N.I.256-2582 Quadrant for
63582
$598.89 13
14
Steel and Poly Pro Plow w/4 trip springs
7 256-4290 Plow Lift Arm, Unimount and Standard
58734
$37.51 15
10 256-1903 Lift Frame, Unimount straight blades except Pro
61903
$457.52 16
11 256-4294 Pivot Bar Kit, Ultramount
67842
$140.56 16
12256-2331Pivot Pin, Driver Side, Ultramount
67974
$22.31 17
32
12
13
16
14
PART NO.
256-2332
256-2333
256-2334
256-2335
256-2336
256-0153
17
15
DESCRIPTION
REPLACES OEM PRICE
Pivot Pin, Passenger Side, Ultramount
67977
$22.31
Receiver, Driver Side, Ultramount
67858
$107.96
Receiver, Passenger Side, Ultramount
67859
$107.96
Stand Assembly, Ultramount, Drivers Side
67845
$266.53
Stand Assembly, Ultramount, Passenger Side
67846
$266.53
$28.76
Ultramount Plow Stand67847
Manufacturer names, part numbers, and descriptions such as Western are used for reference purposes only. It is not implied that
any part listed is the product of the original manufacturers or approved by any manufacturers. Prices subject to change without notice.
800-888-5072
Cutting Edges
CUTTING EDGES FOR STEEL PLOWS
uSEE BELOW FORPOLY PLOW CUTTING EDGESu
for
See Page 42
dges
E
g
tin
ut
C
Rubber
5
We have lowered the pricing on most
Cutting Edges to last the entire
LOC PART NO.
DESCRIPTION
season. The sale pricing for the few 5 256-9270 Blade Extenders for Western Wide Out Blade
edges that are still on sale are good
while existing supplies last or thru
Cutting Edges
12/31/16, which ever occurs first.
REPLACES
PRICE
50626 $203.60
MVP PLOW CUTTING EDGES & RUBBER CENTER
STANDARD PLOW
1
6
Cutting Edges are heavy and require
extra shipping charges, please call.
REPLACES
OEM#
6-1/2' Compact/Std. 3/8" x 6", 8 hls
*Does not fit Sport Utility Blade
49066
1 256-9015
7' Long 3/8" x 6", 8 holes
49070
T
1 256-9020
7-1/2' Long 3/8" x 6", 8 holes
49076
T
$94.59
1 256-9025
8' Long 3/8" x 6", 8 holes
49080
T
$128.19
1 256-9035
7-1/2' x 1/2" (For Pro Plow),8 holes
49088
T
$98.88
1 256-9040
8' x 1/2" (For Pro Plow), 8 holes
49089
T
$117.66
1 256-9030
8-1/2' L 1/2" x 6" (For Pro Plow), 8 holes
49086
T
$123.12
1 256-9045
9' x 1/2"x6" (For Pro Plow)10 holes
49251
T
$130.35
1 256-9050
6' Long 3/8" x 6", 7 holes
58811
C
$90.59
1 256-9055
6-1/2' Long 3/8" x 6", 8 holes
58812
C
$81.76
1 256-9060
7' Long 3/8" x 6", 8 holes
58813
C
$112.18
1 256-9065
7-1/2' Long 3/8" x 6", 8 holes
58814
C
$120.18
1 256-9070
8' Long 1/2" x 6", 8 holes
58815
C
$117.66
1 256-9075
8-1/2' Long 1/2" x 6", 10 holes
58816
C
$152.94
1 256-9080
9' Long 1/2" x 6", 11 holes
58817
T
$128.03
1 256-9085
10' Long 1/2" x 6", 12 holes
58818
T
$141.92
1 155-9055
10' Long x 5/8" x 6"
58818
T
$165.76
T
8
SALE
DESCRIPTION
1 256-9010
$80.51
LOC PART NO.
$85.10
6 256-9242
6 256-9244
7 256-0295
$98.48 8 256-3509
9 256-3510
N.I. 155-0070
DESCRIPTION
9
REPLACES OEM
DESCRIPTION
10
LOC PART NO.
10 256-9246
10 256-9248
10 256-9252
11 256-9268
DESCRIPTION
11
REPLACES OEM
Fits Ultra Mount Pro, Poly Pro and Pro Plus Blades Only
15
16
$112.35
1 256-9124
8' Long x 1/2" x 6", fits Pro Plus
63980
1 256-9126
8-1/2' Long x 1/2" x 6", fits Pro Plus
63985
1 256-9128
9' Long x 1/2" x 6", fits Pro Plus
63990
$119.84 LOC
PART NO.
DESCRIPTION
REPLACES OEM
64758
$127.34 15256-9311Back Drag, 7-1/2' Straight Edge
All UltraMount
$134.83 15256-9312Back Drag, 8' Straight Edge
66892
Pro Plow Steel & Poly and Pro Plus
15256-9313Back Drag, 8-1/2' Straight Edge
66999
Pro Plow Steel and Pro Plus
15256-9314Back Drag, 9' Straight Edge
66991
Pro Plow Steel and Pro Plus
16256-9315Back Drag, 7-1/2' MVP Plus only, two halves 44281-2
15256-9321Back Drag, Wide Out
52278
LOC
PART NO.
256-9112
1 256-9114
1 256-9116
1 256-9118
1
DESCRIPTION
REPLACES OEM
7-1/2' Long x 3/8" x 6". 1/2" holes (8)
49312
fits Standard Poly, Poly Pro & Poly Pro Series 2
8' Long x 3/8" x 6". 1/2" holes (8)
49328
7-1/2' Long x 1/2" x 6". 1/2" holes (8)
49350
8' Long x 1/2" x 6". 1/2" holes (8)
49351
$21.93
Back Drags
7-1/2'Lx1/2"x6", fits Pro Plus & Wide Out64775
1
$74.07
$85.44
$99.45
$98.48
$138.54 N.I. 155-0080 Set of 12, 5/8" x 2-1/2" USS, Carriage Bolt w/Locknut
1 256-9122
POLY PLOW
HALF BLADE
Half Cutting Edge for 7-1/2' x 1/2", MVP PLUS
44996
44997
44898
44890 & 44891
Cutting Edge Centers Kit w/bolts MVP PLUS
REPLACES OEM
STEEL CUTTING EDGES FOR POLY PLOWS
HALF BLADE
Half Cutting Edge for 8-1/2' MVP, 50-1/4"L28407 $80.13
Half Cutting Edge for 9-1/2' MVP, 56"L63678
$92.18
Rubber Flap, MVP
63508
$33.97
Flap Mounting Plate, Passenger Side, MVP
63509
$28.69
Flap Mounting Plate, Driver Side, MVP
63510
$28.69
Set of 6, 1/2 x 2" USS Carriage Bolt Locknut, 2 sets needed
$5.92
10
CUTTING EDGES that fit PRO PLUS PLOWS (5/8" Slotted Holes [10])
PART NO.
7
MVP PLUS PLOW CUTTING EDGES & STEEL CENTERS
$106.78106.78
LOC
Drivers
Side
Passenger
Side
Top or
Ctr. Punch
LOC PART NO.
6
$94.08
$115.87
Punched
PRICE
$74.78
$80.34
$82.74
$81.62
$142.27
$172.98
$200.50
$108.58
*(C) Center Punched, Reversible Edges (Old Style) — (T) Top
18
$110.30
Cutting Edge Bolts and Nuts
$117.66
LOC
18155-0078 Set of 8, 1/2" x 2" USS, Carriage Bolt w/Locknut
18155-0080 Set of 12, 5/8" x 2-1/2" USS, Carriage Bolt w/Locknut
PART NO.
DESCRIPTION
PRICE
$7.80
$21.93
33
MillSupply.com
Headlight Kit
Blade Guides
(For a Complete Description see page 65)
S A L E $15
1
thru 12/3 .90
1/16
See
(For High Visibility Markers see page 8)
8
9
2
LOC
page 65
for details
PART NO.
DESCRIPTION
PRICE
8 SS-645-WK
Headlamp Kit $199.36
9 B-720000
Headlamp Support Brace Kit
$34.92
Hardware
3
1
4
10
14
11
12
15
24
LOC
PART NO.
DESCRIPTION
Blade Guides, (Economy) pair
2040
$12.26/pr
2 153-0325
Replacement Tips, (100 pieces)
1000
$23.69/c
2 155-0301
Replacement Tip, (each)
$0.30/ea
3 256-0330
Blade Guides, (Let it Snow) pair
$23.31/pr
4 153-0035
Blade Guide, 24" Fluorescent orange w/reflective decal/pair$25.56/pr
Kit contains the most frequently used on-the-job repair parts
and are packaged in a polyethylene box designed for under the
seat storage
BRC-05-W - Kit contains: Trip Spring,
Eyebolt w/nuts, Linchpin, Hitch Pin,
Shoe Washers, 16" and 42" Hose,
Motor Solenoid, 90o Elbow, Hairpin
Cotter, 3/4x3.5" Rivet, and 2 Carriage
Bolts with nuts. $78.04
Visit us online for more
detailed illustrations!
29
28
6
DESCRIPTION
7
LOC.
PART NO.
31
REPLACES OEM#
PRICE
10 155-0105
Eyebolt with Nuts
90493
$3.54
11 155-9110
Trip Spring
23039
$9.98
90165
$9.11
Slotted Hex Nut
91472
$1.35
14 256-0130
3/4" x 3-1/2" Clevis Pin
93063
$3.48
14 256-0125
3/4" x 4" Clevis Pin
93061
$3.13
14 315-0130
1" x 3-1/2" Clevis Pin
93079
$3.13
14 315-0133
1" x 4" Clevis Pin
93077
$4.86
14 256-0145
1" x 5" Clevis Pin
93080
$6.64
SPECIAL SALE
thru 12/31/16
15
256-0127
Shock Absorber for Pro Plow Steel/Poly
60338
$63.45
20
315-0149
13/16" x 29-1/2" Pivot Pin (V-Plow)
62638
$16.18
22 256-0152
1" x 3-1/2" Hitch Pin w/Hairpin Cotter
93028
$5.22
155-9450 1 QT $5.95
155-9460 1 CASE $59.90
24 256-0155
5/32" x 1-1/2" Cotter Pin
91911
$0.12
25 256-0160
Hairpin Cotter
91965
$0.85
26 256-0165
3/16" x 1-1/4" Groove Pin
92004
$0.40
5/32" x 3-3/4" Hairpin Cotter
91965K$0.94
PRICE
12
27
256-0115
DESCRIPTION
Cap Screw, 3/4" x 1-7/8"
For Thermoplastic Snow Deflectors and
Non-Stick Plow Liners See page 29.
PART NO.
30
13 256-0120
Red Plow Paint & Transmission Fluid
LOC
27
20
Underseat Emergency Repair Kit for Western Plows
5
26
25
REPLACES OEM # PRICE
1 153-0040
22
13
256-0166
5 256-0565
Red Paint, 1 Quart (Shipped Via USPS)
$63.90/qt
28 256-0167
Uni-Mount Plow Stand
61353
$20.58
256-0570
Red Touch-up Spray Paint, 12 oz. aerosol
$19.55/12oz
29 256-0168
Lock Pin for Plow Stand
93034K
$8.68
N.I. 256-9450
Transmission Fluid, 1 quart
$5.17/qt
SALE $5.95
Reg $8.61/qt
6
7155-9450 Hydraulic Fluid, 1 quart
7
34
155-9460
Hydraulic Fluid, Case of 12
30256-0151Pin only, 1/2" x 5 1/2"
93033K
$8.08
67847
$28.76
31
256-0153
UltraMount Plow Stand
SALE $59.90Reg $75.06/Case
800-888-5072
Shoe Assembly and Parts
3
1
2
LOC PART NO.
1256-9205
2256-9225
3256-0210
4256-0215
5315-0120
4
Hoses and Fittings
5
DESCRIPTION
Standard Shoe Assy., 1" Spindle
Spindle Dim: 1" x 7-3/4"; Disc Dia: 6"
Heavy Duty Shoe Assy, 1" Spindle
Spindle Dim: 1" x 8-5/8"; Disc Dia: 5-3/4"
Shoe Washer (sold each)
Shoe Spacer 1-1/2" Long
Linch Pin
49067
$24.48
49071
$34.93
91109
60045
93010
$0.50
$3.83
$1.26
14
16
Unimount Power Angling & Lift Cylinders
Mea
15
JIC = Hose with
swivel 9/16-18
threaded ends
surem
ent
17
6
6A
6B
22
7
7B
LOC
PART NO.
6
256-0240
6A 256-0245
6B 256-9260
6C 315-9208
6D 256-0247
6D 256-0248
7 256-0415
7B 256-0405
8 155-0415
8B 256-0410
DESCRIPTION
8B
Angle Cylinder 1-1/2" x 10", 1/4" NPT Hose Port 25209
$79.08
(T-Handle / 1" ret. pin) Conventional Straight Blades, Unimount
Angle Cylinder 1-1/2" x 10", 1/4" NPT Hose Port 56102
$89.53
(Joy Stick / 3/4" ret. pin) Conventional & Unimount Straight Blades
Angle Cylinder 2" x 16" H.D., 1/4" NPT Hose Port 25878
$148.05
Conventional & Unimount Straight Blades
Lift & Angle Cyl, Double Acting, 2" x 10"
$204.13
9/16" Hose Port. Unimount MVP
Lift Cylinder, 1-1/2" x 6", 1/4" NPT Hose Port
25200
$76.96
Lift Cylinder, 2" x 6", 1/4" NPT Hose Port
25210
$125.73
Packing Nut 1-1/2", Unimmount
25944
$16.28
Packing Set 1-1/2", Unimount
25205
$8.98
Packing Nut 2", Unimount
25948
$29.41
Packing Set 2", Unimount
25215
$13.28
Ultramount Power Angling & Lift Cylinders
9
LOC PART NO.
9 256-0241
9 256-0242
9 256-0243
9C 256-0244
11
155-0401
Hose connections
have 9/16-18 thread
with O-Ring
11
9C
DESCRIPTION
31229
$3.42/1oz.
Lift Cylinder, 1-1/2" x 8", Single Acting,
56538K
$87.93
9/16-18 Hose Port, Ultramount MVP, Straight & Wide Out
Angle Cylinder, 1-1/2" x 10", Single Acting,
56614
$85.44
9/16-18 Hose Port, for Ultramount Straight Blade, Standard & Pro Plow
Angle Cylinder, 1-1/2" x 12", Single Acting,
64148
$93.33
9/16-18Hose Port, for Ultramount Straight Blade & Pro Plus
Angle Cylinder, 2" x 11" Double Acting,
56750
$228.65
9/16-18 Hose Ports, for Ultramount MVP
Seal Kit, 1-1/2", Ultramount single acting cyl. only 56556
$7.75
LOC
PART NO.
21
20
19
23
8
6C
6D
18
Hose connections
have 1/4"NPT
without an O-ring
25
24
26 (two piece)
We don't recommend using Teflon® Tape on pipe thread
joints. Tape will eventually break down and contaminate
your system. Instead use a Liquid Teflon Pipe Joint
Compound. We carry #31229 $2.89/1oz.
DESCRIPTION
14256-9350
38" Hose, 1/4 Male NPT
55020
$9.59
15256-9380
Angle Hose Replacement Kit
55021
$48.76
1/4" x 8" Hose with Female JIC ends
56765
$11.96
44347
$13.15
56617
$16.70
16
256-9381
Lift Hose Suburbanite
16
256-9382
UltraMount Lift Hose, MVP Plus
16
256-9383
Lift Hose Ultramount
16
315-0151
Lift Hose Suburbanite
16
315-0158
Angle Hose Suburbanite
56831-1
$14.98
56616
$22.61
Angle Hose Ultramount
16315-0157
3/8" x 38" Angle Hose with Female JIC ends 44351
$22.28
Ultramount MVP and Wide-Out Angle Hose
3/8" x 45" Angle Hose with Female JIC ends 44350
16
16
315-0159
56598/56830 $21.19
315-0160
Ultramount MVP and Wide-Out Angle Hose
1/4" Hex Nipple
25529
$1.62
18256-0360
1/4" x 90o Street Elbow
92210
$2.91
19256-0365
1/4" x 90o Male Elbow
92278
$2.86
20256-0370
1/4" x 90o Male Elbow, Tall
92275
$4.54
21256-0375
1/4" x 90o Street Elbow, Tall
92208
22256-0377
45o Swivel Elbow, 1/4" NPT Male/Female
$3.11
23
256-0380
90o Short Elbow, Male 9/16-18 x Male JIC
56615
$3.54
24
256-0381
90o Long Elbow, Male 9/16-18 x Male JIC
64212-1
$4.40
25
256-9379
Union, Male flare x 1/4 Male NPT
56684-1
$1.96
1/4" Hydraulic Coupler
25232
$9.99
17
256-0355
$24.61
26155-0375
LOC. - Location on Drawing
$4.84
N.I. - Not Illustrated
35
MillSupply.com
Joystick Control Assembly
33
34
Motor Solenoids and Cables
35
2
4
37
3
5
40
31
30
Unimount®
9 Pin and 12 Pin Repair Harness
36
6
9
32A
10
32B
43
11
09880 - Dielectric Grease,
5 gram. (Single use pouch)
Provides a moisture-proof barrier
that lubricates and protects
electrical equipment from salt,
dirt and corrosion. $1.79
12
13
LOC
PART NO.
2 256-0510
DESCRIPTION
Motor Solenoid
3256-0515 Motor Solenoid, Tower Style
REPLACES OEM #
PRICE
56131K
$23.94
56134K
$15.95
LOC PART NO.
DESCRIPTION
30 256-0512
Joystick Control Assy without cables
N.I.256-0514 Lever & Knob assembly for Joystick assy
49016
$17.50
Platen Assembly for Joystick
49015
$45.30
N.I. 256-0517
Copper Contact Strip for platen assembly 56026
32A 256-0531
Base Cover without Wire & Copper $29.86
32B 256-0529
Base Cover with wire attached to center contact
also has side spring clip
$46.70
33 256-0518
34 256-0520
Ground Cable 60" (Black)
55984
$15.13
5 256-0543
Battery Cable 60" (Red)
25635
$15.13
35 315-0167
6 256-0545
Battery Cable 22" (Red)
22511
$12.33
36 256-0521
256-9308
56028
Control Cable (T-Handle)
55363
$28.89
56035
$24.30
Adj. Control Cable (Joystick), Left & Right
56130
$34.75
Floor Mounting Bracket for Joystick
56079
$45.38
$17.22
9 Pin Harness Repair for 37 256-0522
Dashboard Mounting Bracket for Joystick_
56080
Unimount® Vehicle Male end49308
$46.07
N.I. 256-0526
#8-18 x 5/8" HXW Mounting Screws, (4 pcs)
93154K
9 Pin Harness Repair for (For mounting joystick to bracket)
256-9317
$46.75
Unimount® Plow Female end
12 Pin Harness Repair for 11
256-9310
49317
Unimount® Vehicle Male end49310
$106.57
12 Pin Harness Repair for 12
256-9319
Unimount® Plow Female end
Vehicle side harness plug covers, 2 pieces
13
256-1548
36
49319
$93.46
$7.65
$6.05
Control Cable (Joystick) Raise & Lower
10
PRICE
$121.79
31 256-0516
4 256-0540
9
REPLACES OEM #
$6.69
40 256-0524
Western Controller (Unimount Straight Blade)
56369 $351.96
N.I. 256-0536
Board for controller for 256-0524
49283 $260.62
43 1306902
Hand Held Remote for Straight Blade Plow
LOC. - Location on Drawing
N.I. - Not Illustrated
covers both plugs on vehicle side
$199.50
800-888-5072
Cable Operated
Power Pack
Replacement Parts for Cable Operated Power Packs
5
1
6**
8**
7
3 - Pump Assembly w/
New Style Motor Only
2**
3
13
4
1A
26
Old Style
17
21
20
1
New Style
9**
12
11
10
16
** Parts Included in Master Seal Kit (LOC 25)
(only 'O' rings and gaskets in kit)
Cable Operated Power Pack Replacement Parts
LOC
PART NO.
1 256-0528
1A 256-0525
2 256-0533
3
256-0530
4 256-0538
5 256-0415
6 256-0405
7
256-0561
8 256-0562
9 256-0563
9 256-0535
10 256-0558
11 256-0560
12
256-0564
13 256-0566
14 256-0567
15 256-0170P
16
256-0580
17
256-0568
18
256-0569
19 256-0593
20
256-0541
21
256-0542
22
256-0544
23
256-0546
25256-0585
256-4290
26
DESCRIPTION
18
19
23
22
14
REPLACES OEM #
PRICE
Motor, New style (uses one motor gasket)
56133
$89.95
Motor, Old Style (uses 2 motor gaskets 25556A
$93.42
separated by 1/4" plate)
Gasket
25861
$1.51
Pump Assembly with filter and bolts
49211 $153.85
(Only fits new style motor)(Does not fit Ultra Mount)
Filter Only - for pump assembly
56185
$5.22
Packing Nut 1-1/2"
25944
$16.28
Packing Set 1-1/2"
25205
$8.98
Plunger Ram and Ring, 1-1/2"
25202
$56.90
Oil Seal for New style motor only
49014
$13.56
O-Ring, New style pump
56416
$0.49
O-Ring, Old style pump
25620
$2.74
O-Ring for Base Lug Cap
25618
$1.08
Base Lug Cap with O-Ring
25968
$13.33
Lift Valve with O-Ring
49064
$11.95
Check Valve Assembly
55568
$39.42
Screw
90666
$1.38
Screw90600
$0.20
Cushion Valve Kit, (Set of 2)
49138K
$14.08
Lever
55573 $12.09
Spring
55359 $17.92
Lever
55364
$6.93
Cover
55958
$6.02
Gasket for 256-0541
55350
$2.88
Cover
55959
$6.92
Gasket for 256-0546
55357
$8.28
**Master Seal Kit for Cable Power Unit
49049
$83.00
Includes all parts in drawing with "**"
Lift Arm
58734
$37.51
37
MillSupply.com
Electric Solenoid
Power Pack
3 - Pump Assembly
5
1
25
6**
8**
2**
17
7
3
21
15**
20
13**
4**
14**
23
**
9**
10**
11
**
**
12
** O-Rings
only
**
**
22
**
** O-Rings only
14**
13**
** Parts included in Master Seal Kit (LOC 24)
Electric Solenoid Power Pack Replacement Parts
LOC
PART NO.
DESCRIPTION
1
256-0528
Motor
56133A5819
$89.95
2
256-0533
Gasket
2586125861
$1.51
3
256-0530
Pump Assembly with filter and bolts
(Does not fit Ultra Mount)
49211
7049
Replaces Fisher #
PRICE
$153.85
4
256-0538
Filter Only - for pump assembly
56185
7053K
5
256-0415
Packing Nut 1-1/2"
25944
5763
6
256-0405
Packing Set 1-1/2"
25205
339K
7
256-0561
Plunger Ram and Ring, 1-1/2"
25202
$56.90
8
256-0562
Oil Seal
49014
$13.56
9
256-0563
O-Ring
564165821$0.49
6578
10
256-0558
O-Ring for Base Lug Cap
25618
11
256-0560
Base Lug Cap with O-Ring, Western only
25968
25618
$5.22
$16.28
$8.98
$1.08
$13.33
11
315-0186
Base Lug Cap with O-Ring, Fisher only
5824
$10.78
12
256-0580
Cushion Valve Kit (Kit of 2)
49138
7629K-3
$14.08
13
256-0581
O-Ring Boss Plug
92960
92960
$5.33
14
256-0582
Poppet Check Valve Repair Kit
49226
7630K
$35.56
15
256-0583
Quill Assembly
56330
7631
$28.67
17
256-0584
Cover Assembly
56291
7649
$20.84
20
256-0548
Cartridge 20 with Nut, Down & Float
49227
7634K-2
$39.33
21
256-0550
Cartridge 30 with Nut, Left & Right
49228
7636K-1
$52.72
22
256-0553
Cartridge 40 with Nut, Raise & Left
49229
7637K-1
$63.49
23
256-0555
Coil with Spade Terminals
49230
7639K-2
49340
49340
24256-0586 **Major Overhaul Kit Master Seal Kit
Includes all parts in drawing with "**"
38
Replaces Western #
25
256-4290
Lift Arm
$16.38
$145.63
$37.51
Manufacturer names, part numbers, and descriptions such as Fisher & Western are used for reference purposes only. It is not implied that
800-888-5072
Western Unimount MVP
& Fisher EZ-V
Insta-Act Hydraulic Unit
6
Western UltraMount
2
Insta-Act Hydraulic Unit
36
34
35
3
Flo-Stat & Fisher 22155-1
37
40
6
43
50
37
41
37
35
31
33
39
55 - Master Seal O-Ring Kit
Universal Kit, not all seals are used in each unit
40
43
REPLACES
DESCRIPTION
1 256-0527
Motor Assembly, 4-1/2"
21500
21500K-1 $99.50
2 256-0501
Reservoir Kit, Includes O-Ring
66631
66631
$114.65
3
O-Ring for Reservoir
66519
66519
$7.47
6 256-0576
Breather Cap, Fits Western
66525
6 256-0572
Breather Cap, Fits Fisher
21727-2
32 256-0580
Cushion Valve Kit (Set of 2)
Fisher #
2
48
Straight Blade
PRICE
$14.60
$33.57
55 - Master Seal
O-Ring Kit
Universal Kit, not all
seals are used in
each unit
3
Unimount MVP & Fisher EZ-V Replacement Parts
LOC PART NO.
Western #
39
41
Fisher
SD, HD, X and
MC Blades
50
37
256-0527 - 4-1/2" Motor, Clockwise, Slotted Shaft
• Brass terminals moved toward common end
• Switch mounting holes on field case to accomidate new style 42902 and 56131K-2
• Will replace newer and older versions of the 21500 motor
• 4 field motor for smoother operation
256-0507
32
32
33
32
Western
Standard,
PRO-PLOW
and PRO PLUS
48
35
32
48
1
1
48
32
33 34
UltraMount FloStat & Minute Mount 22155-1 Replacement Parts
LOC PART NO.
1256-0527
DESCRIPTION
REPLACES
Western #
21500
Fisher #
PRICE
21500K-1 $99.50
2 256-0502
Reservoir Kit, Includes O-Ring 21830
21830
3 256-0507
66519
66519
$113.48
6256-0572
Breather Cap
21727-2K 21727-2
$33.57
31 256-0582
Poppet check valve repair kit
49226
7630K
$35.56
32 256-0580
49138
7629K-3$14.08
$7.47
49138
7629K-3$14.08
33256-0550 Cartridge 30 with nut
49228
7636K-1
$52.72
49227
7634K-2
$39.33
66608-1
66608K-1 $62.46
35256-0553
49229
7637K-1
$63.49
49227
7634K-2
$39.33
66783W
66783K
$70.31
35256-0553
Cartridge 40 with nut
49229
7637K-1
$63.49
37 256-0555
Coil with spade terminals
49230
7639K-2
$16.38
37256-0555
49230
7639K-2
$16.38
40 256-0532
Hydraulic Pump Kit
21501-1
21501K-1 $352.45
39256-0581
3/8-24 O-Ring Boss Plug
92960
92960
41 256-0587
Shaft Seal
66515
66515
40 256-0532
Hydraulic Pump Kit
21501-1
21501K-1 $352.45
43 256-0573
Suction Filter
56789-3
26781-3
41 256-0587
48 256-0577
Quill Assembly, See Inset
48 256-0588
Quill Assembly, See Inset
66509
50 256-0592
55 256-0508
Return Screen Assembly, each
Master Seal O-Ring Kit
$6.48
$5.33
$6.48
Shaft Seal
66515
66515
43256-0573
Suction Filter
56789-3
26781-3
5666256662$26.91
48 256-0577
Quill Assembly, See Inset 5666256662$26.91
$20.54
48 256-0588
Quill Assembly, See Inset 66509
$16.49
50 256-0592
Return Screen Assembly
66405
66405
$16.49
55 256-0508
56657-4
56657-4
$23.50
66405
56657-4
66405
56657-4
$13.72
$23.50
$13.72
$20.54
39
MillSupply.com
Western UltraMount
MVP Plus & Fisher
XV Hydraulic Unit
Western UltraMount
MVP & Fisher EZ-V
Hydraulic Unit
37
6
2
27
32
37
35
33
34
3
40
32
48
35
36
36
36
31
41
48
41
32
37
34
36
37
35
35
34 32
37
1
34
37
40
50
6
43
43
3
Universal Kit, not all seals are used
in each unit
2
PART NO.
PRICE
21500
$99.50
2 256-0503
443271
$56.80
PART NO.
DESCRIPTION
$7.47
66519
6 256-0572
Breather Cap
21727-2K
$33.57
31 256-0579
Relief Valve Kit (Set of 2)
44338
$26.70
32 256-0580
4913834
$14.08
PRICE
34 256-0548
49227
$39.33
35 256-0595
Cartridge SF08-2015 with nut
44336
$92.47
Cartridge SVCV08-20 with nut
44332
$118.02
37 256-0555
49230
40 256-0537
Hydraulic Pump Kit
44328-1
DESCRIPTION
REPLACES
1 256-0527
21500
$99.50
2 256-0502
21830
$113.48
3 256-0507
66519
6 256-0572
Breather Cap
21727-2K
32
49138$14.08
256-0580
REPLACES
1 256-0527
3256-0507O-Ring for Reservoir
UltraMount MVP Hydraulic Replacement Parts
LOC
UltraMount MVP Plus Hydraulic Replacement Parts
LOC
$7.47
$33.57
36
256-0596
$16.38
$243.12
49228
$52.72
41 256-0587
Shaft Seal
66515
49227
$39.33
43 256-0573
Suction Filter
56789-3
$13.72
35256-0553
48 256-0577
Quill Assembly
56662
$26.91
55
56657-4
$23.50
49229
$63.49
66783W
$70.31
37 256-0555
49230
$16.38
40
256-0532
Hydraulic Pump Kit
21501-1
41
256-0587
Shaft Seal
66515
43 256-0573
Suction Filter
56789-3
$13.72
48
256-0577
Quill Assembly
56662
$26.91
50
256-0592
Return Screen Assembly
66405
$16.49
55
256-0508
56657-4
$23.50
40
256-0508
$352.45
$6.48
$6.48
800-888-5072
Western UltraMount
Wide-Out Hydraulic
Unit
6
Western HTS & Fisher
HT Hydraulic Unit
2
37
6
36
3
33A
43
40
2
33B
32
41
40
32
39
31
35
3
37
43
41
48
37
34
1
32
36
29
35
33
1
34
37
37
UltraMount Wide-Out Hydraulic Replacement Parts
LOC
PART NO.
DESCRIPTION
REPLACES
PRICE
1 256-0527
21500
$99.50
2 256-0503
443271
$56.80
$7.47
3256-0507O-Ring for Reservoir
66519
6 256-0572
Breather Cap
21727-2K
32
49138$14.08
256-0580
33A256-0597 Cartridge SV08-45 with nut
33B
256-0598
$33.57
49452
$99.69
49456
$115.92
49227
$39.33
35256-0596 Cartridge SVCV08-20 with nut
44332
$118.02
66783W
$70.31
37 256-0555
49230
$16.38
40
256-0537
Hydraulic Pump Kit
44328-1
41
256-0587
Shaft Seal
66515
43 256-0573
Suction Filter
48
256-0577
55
256-0508
Cartridge SV08-41 with nut
Western HTS and Fisher HT Replacement Parts
LOC PART NO.
DESCRIPTION
1 256-0523
Motor, 3"
REPLACES
Western #
Fisher #
2 256-0504
48538
48538
3 256-0507
66519
66519
Breather Cap
21727-2K
21727-2
6 256-0572
PRICE
48543-148543-1$199.37
$79.03
$7.47
$33.57
29 256-0578
Relief Valve Repair Kit
27792-1
27792-1
$13.58
31 256-0582
49226
7630K
$35.56
32 256-0580
49138
7629K-3$14.08
66608-1
66608K-1
$62.46
49227
7634K-2
$39.33
$243.12
35256-0553
49229
7637K-1
$63.49
$6.48
37 256-0555
49230
7639K-2
$16.38
56789-3
$13.72
39 256-0581
92960
92960
Quill Assembly
56662
$26.91
40 256-0532
Hydraulic Pump Kit
21501-1
21501K-1 $352.45
56657-4
$23.50
41 256-0587
Shaft Seal
66515
66515
43 256-0573
Suction Filter
56789-3
26781-3
$5.33
$6.48
$13.72
41
MillSupply.com
Western Suburbanite & Fisher Homesteader
RUBBER CUTTING EDGES
Eliminates rust stains
on Cement
Suburbanite & Homesteader Hydraulic Unit Replacement 32
37
34
35
1
36 41
3
STEEL RUNNER
CARRIES WEIGHT
RUBBER
AT REST
2
40
32
PART NO.
DESCRIPTION
Western #
1
256-0575
Motor Assembly, 3"
27753
2
256-0504
3
256-0507
REPLACES
All rubber cutting
edges are furnished
with 3"-long slots
for adjustment.
RUBBER
PLOWING
EXTEND 1"
FOR HARD PACKED ICE
EXTEND 3" FOR LIGHT SNOW & SLUSH
39
LOC
BOLT HOLES SLOTTED
FOR BLADE ADJUSTMENT
6
43
31
INVERTED STEEL
CUTTING EDGE
Fisher #
PRICE
27753
$99.50
Reservoir Kit, Includes O-Ring 48538
48538
$79.03
66519
66519
$7.47
6 256-0572
Breather Cap, 3/8 NPT
21727-2K
21727-2
$33.57
31 256-0582
49226
7630K
$35.56
32 256-0580
49138
7629K-3
$14.08
34 256-0548
49227
7634K-2
$39.33
35 256-0551
66608-1
66608K-1
$62.46
36 256-0553
49229
7637K-1
$63.49
37 256-0555
49230
7639K-2
$16.38
39 256-0581
92960
92960
$5.33
40 256-0574
Hydraulic Pump Kit
27746
27746
$262.73
41 256-0587
Shaft Seal
66515
66515
43 256-0573
Suction Filter
56789-3
26781-3
$6.48
$13.72
Suburbanite & Homesteader Blade Replacement Parts
For Western® Plows
(Includes Mounting Hardware)
PART NO.
PLOW
RUBBER SIZE
REPLACES
PRICE
B-608261
B-608262
B-608263
B-608291
B-608292
B-608321
B-608323
6-1/2' Standard
7' Standard
7-1/2' Standard
8' Standard
8-1/2' Standard
9' Standard
10' Standard
1" x 6" x 78"
1-1/2" x 8" x 84"
1-1/2" x 8" x 90"
1-1/2" x 8" x 96"
1-1/2" x 8" x 102"
1-1/2" x 10" x 108"
1-1/2" x 10" x 120"
608261
608262
608263
608291
608292
608321
608323
$143.66
$304.08
$325.51
$346.93
$368.95
$504.80
$560.29
For Fisher® Plows
(Includes Mounting Hardware)
PART NO.
PLOW
RUBBER SIZE
1312220
1312225
1312226
1312230
7'-6" Plow
8' Plow
8' Plow
9' Plow
1-1/2" x 10" x 90"
1-1/2" x 10" x 96"
1-1/2" x 10" x 96"
1-1/2" x 10" x 108"
SLOTS
Bolts and Nuts for Rubber Cutting Edges
155-9920 155-9921 155-9924 M-1702 2
1/2" x 3-1/2" Carriage Bolt
1/2"-13 Nylon Lock Nut
5/8" x 4" Carriage Bolt
5/8"-11 Nylon Lock Nut
$0.80
$0.24
$1.19
$0.60
8 Slot
8 Slot
10 Slot
11 Slot
PRICE
$415.86
$443.31
$446.30
$504.80
Custom Cut Rubber
Cutting Edges are
available.
See page 29
NON-STICK POLY SNOW PLOW LINERS
1
3
LOC
REPLACES OEM #
PRICE
1 256-9005
6'-8" Cutting Edge with Fasteners
27713
$164.04
1 256-9007
7'-4" Cutting Edge with Fasteners
27714
$200.97
2 256-0337
26" Flexible Blade Guide Set, Stud Mount
27195
$38.87
3 256-9106
Elastomeric Trip Spring
27351
$151.02
42
PART NO.
DESCRIPTION
• Red or Yellow Non Stick Liner
• One size - 96" x 28"
• Trims easily with aviation snips or sharp knife
• Includes 9 top-edge mounting fasteners and silicone sealant
• Your plow will look new again
153-9628 Yellow Plow Liner, 96" x 28" $46.66
153-9630 Red Plow Liner, 96" x 28"
$46.66
RESIDENTIAL WALK BEHIND SALT SPREADER
Chapin Residential Spreaders redefine what consumers expect from a
spreader for home use. The 80-Pound
Salt and Ice Melt Spreader has the
same large, 2 piece hopper design
that Chapin Pro models offer, boasting
a rugged powder coated steel frame,
ergonomically designed bail system
that allows for use of either hand during
operation, baffle system for edge control and pneumatic tires for just about
any terrain.
Good
Made in
USA
363-1600
80 lb. Capacity
Residential Salt
Spreader, Carbon
Steel Frame &
T-handle. $99.85
•80-Pound capacity hopper with
enclosed gear system to withstand
the elements, supported by a rugged
powder coated steel frame
•All season design compatible with salt,
halite/ice melt, fertilizer, seeds with a
simple gate adjustment
•Front and side baffle system allows for
precise control of spread pattern
•Includes snow/rain cover and salt grate
COMMERCIAL WALK BEHIND SALT SPREADERS
• Solid steel linkage opens and closes the gate in incremental steps
• Large gate opening to allow product to flow smoothly
• Powder coated steel or S.S. T-handle with comfort grips with gate control at fingertips
• Poly conical auger helps agitate product and minimize clumping
• Adjustable salt baffle system helps spread salt only where you want it
• Easy to assemble
• 12” Fully pneumatic tires provide stability over uneven terrain
• Powder coated steel or S.S. frame directly supports hopper base
and hopper
• Enclosed metal gears withstands the elements
• Unique two-piece hopper design allows for easy replacement of hopper
• All Season Spreader spreads salt. halite, ice-melt, fertilizer, seed and more with a simple gate adjustment
Made in
USA
Better
Sale Price Good
Thru 12/31/16
363-1680
80 lb. Capacity Professional
Salt Spreader, Carbon Steel
Frame & T-handle.
Reg. $229.00 SALE $189.00
Best
363-1700
100 lb. Capacity Professional
Spreader, Stainless Steel
Frame & T-handle. Reg. $299.00
SALE $289.00

Western - Mill Supply

Transcription

Similar documents

Fisher - Mill Supply

Homesteader Parts Poster

spreaders and snowplow parts

FISHER Reference Manual, Rev. 04

Product Guide