pickup v-box spreaders

Transcription

pickup v-box spreaders
LPV
TM
Spreaders | PV
TM
Spreaders | Poly Hawk
TM
Spreaders | MDV
TM
Spreaders
Equipment | Materials | Solutions
Consider the
possibilities
of Swenson
PV Spreaders
Swenson’s PV spreaders have the flexibility to work with most
standard 1/2-ton, 3/4-ton, and 1-ton pickup trucks, as well as heavy
duty and super duty trucks, and flatbeds or dump bodies. Swenson’s
quality and performance are second to none. Our rugged lines of PVs
are the industry leaders for reliability and can stand the rigors of the
harshest environments. From our virtually indestructible PolyHawk,
to the low maintenance and ultra reliable electric drive units,
Swenson has a spreader designed for you.
Swenson Pickup V-Box Spreader Applications
Truck Classification*
How to choose the
right Swenson PV
for your application
Material (bulk Operating System
or Bagged)
With a complete line of rugged equipment
to choose from, Swenson’s value advantage
makes it easier than ever to make the
right choice for your specific needs.
Using the application/equipment chart
to the right we’ve made it easy to best
determine which Swenson PV unit is best
for your application.
Poly Hawk™
PV™
LPV™
C lass 1 (up to 6,000 lbs. GVW)
x
x
x
C lass 2 (6,001 to 10,000 lbs. GVW)
x
x
x
C lass 3 (10,001 to 14,000 lbs. GVW)
x
x
x
C lass 4 (14,001 to 16,000 lbs. GVW)
x
x
x
C lass 5 (16,001 to 19,500 lbs. GVW)
x
x
x
C lass 6 (19,501 to 26,000 lbs. GVW)
x
x
x
E lectric
x
x
Hydraulic
x
x
S elf-contained Hydraulics
x
G as
x
x
x
x
S and
x
x
x
x
S alt
x
x
x
x
S alt and Sand, Mixed
x
x
x
x
Carbon Steel vs. Stainless Steel vs. Polymer
GOOD
Carbon Steel
Hoppers
BETTER
GOOD
BETTER
Carbon Steel hoppers provide the most economical
solution for the ice control expert. All Swenson
Carbon Steel BEST
PV’s go through a state-of-the-art
BEST
powder coat line prior to shipment to provide the
most durable and consistent finish in the industry.
x
x
x
*Never exceed the load capacity of your truck.
Check your owners manual.
GOOD
GOOD
GOOD
GOOD
BETTER
BETTER
BETTER
BETTER
BEST
BEST
StainlessBEST
Steel Hoppers
BEST
Stainless Steel is designed for highly corrosive
environments, such as salt and sand spreading.
Because Stainless Steel is noncorrosive in nature,
no painting is necessary. Stainless Steel means
less maintenance and an extended life of your PV.
MDV™
Polymer Hoppers
Polymers have been used for years in many demanding
industries including the automotive, marine, and recreational
segments. Hoppers made of polymer withstand cold temperature,
will not corrode, and retain their shape even after being loaded/
unloaded with large amounts of material. Our newest product,
the Poly Hawk™, has a one-piece polyethylene hopper that is
nearly indestructible!
swensonproducts.com
Gas drive
Electric drive
Acres Per Hour
76% More Productive
30
30.6
acres
20
10
Baffle pins provide secured,
controlled spreading.
 S preads the same amount of material 2.3 times
17.4
acres
Competitor
Highlights
Swenson
Swenson’s Electric LPV provides 76% more
productivity than competitive spreaders.
Equipment
faster than competitors allowing for more
profitable and efficient spreading
 4 5º slope on hopper sides allows
free flow of materials to conveyor
 1 2 V sealed, electric motor provides smooth,
Size Specifications:
36" wide x 25" tall*** x (5', 6', 7', 8') deep – 434 to 586 lbs
Capacity:
0.30 - 0.95 cubic yards
Drive:
Gas, Sealed 12V electric motor
Construction:
Stainless Steel
Flow Rate:
4' - 30' spread pattern**
Steel Gauges:
14 gauge trough
Safety Features:
Drop N Lock top screen
Warranty Details:
1 year warranty*
Options:
Vehicle battery harness kit, Nylon strap mounting kit, Tarp kit,
Additional 6” side extension
* 1 year limited warranty applies to hopper only. See dealer or www.swensonspreader.com for more details
** Approximate width; spreading results may vary
*** 31 inches with optional 6 inch extension
Materials
 Salt
 Sand
 Salt / Sand Mix
swensonproducts.com
LPV SERIES
LPV™
quiet operation for spreading salt in
neighborhoods or noise sensitive areas
 1 2 V sealed, electric motor minimizes
maintenance costs with less moving parts
resulting in increased up time and productivity
 1 4 gauge carbon steel sides provide durable
and long lasting construction
R
eplaceable conveyor floor for easy service
and maintenance
Self-cleaning pintle style conveyor
chain is easily serviced and maintained
providing longer conveyor life

Drop N Lock top screen provides increased
safety and reduced maintenance
C
overed chains at both the front and rear
of hopper provides increased safety for
the operator
1
Gas drive
electric drive
hydraulic drive
PV SERIES
PV™
Highlights

12 gauge carbon steel sides provide
durable and long lasting construction

45º slope on hopper sides allows

Replaceable stainless steel conveyor
floor easily serviced and maintained

Drop N Lock top screen provides
increased safety and reduced
maintenance

Maintenance free front idler
roller provides trouble-free drag
chain operation

Standard Inverted V
Poly bearings.
Fork pockets.
Wireless controller.
Equipment
50" wide x 35" tall x 8' deep – 905 to 955 lbs
Capacity:
2.0 cubic yards
Drive:
Gas, electric, hydraulic
Weight:
915 - 1040 lbs
Construction:
Carbon or Stainless Steel
Flow Rate:
4' to 30' spread pattern**, 13” polyurethane disc
Steel Gauges:
12 gauge trough
Safety Features:
12,500 lbs tensile strength self cleaning pintle chain, Drop N Lock top screen
Warranty Details:
1 year limited warranty*
Options:
Top screens, inverted v, center lift point, replaceable in-bolt center floor, In cab
controls (engine drive) (OPTIONAL), wireless controls-engine drive (STANDARD),
heavy duty engine shroud, patent pending fork pockets for easier handling
of spreader Nylon strap mounting kit, Cab protector/spill shield, Liquid spray
systems, Hydraulic hose kits, Hydraulic control valve stand, Hydraulic pump
& reservoirs, Tarp kit, Special paint, Remote
battery connection harness, Spinner extension,
Additional 6” side extension, Various reservoirs

2 internal/4 external baffles
Materials
QR CODE
HERE
 Salt
 Sand
2
 Salt / Sand Mix
swensonproducts.com
Gas drive
electric drive
hydraulic drive
Highlights

Triple crimped top edges and four
Gasoline engine drive.
Electric motor drive.
Hydraulic motor drive.
Equipment
side body supports providing durable
contruction and longer life
 Heavy duty stainless steel swing up
50" wide x 35" tall x 8' deep – 850 lbs
Capacity:
2.0 cubic yards
Weight:
776 - 855 lbs
Construction:
Poly
Flow Rate:
4' to 30' spread pattern
Steel Gauges:
10 gauge trough
Safety Features:
Overlapping baffles, Top screens
Warranty Details:
Options:
Honda engine drive, Hydraulic drive, Electric motor drive, Engine over
hydraulic drive, Nylon strap mounting kit, Liquid spray systems, Hydraulic
hose kits, Hydraulic control valve stand, Tarp kit, Remote battery connection
harness, Spinner extension
Materials
 Salt
 Sand
 Salt / Sand Mix
spinner simplifies clean up and storage
 Durable one-piece polyethylene
hopper resists corrosion. Leads to
longer life and less downtime

45º slope on hopper sides allows

Replaceable stainless steel conveyor
Poly SERIES
POLY HAWK™
floor easily serviced and maintained

Comes fully assembled and ready
to install from the factory reducing
installation time and cost

2 cubic yard capacity hopper. Greater capacity mens less stops to reload material

Dual speed variable controller allows
for separate independent control
of the auger and the spinner disk

Wireless controls for ease of installation
and use

I ntegral fork pockets for easy installation
and removal of spreader
swensonproducts.com
3
electric drive
hydraulic drive
MDV-A SERIES
MDVA™
Highlights
 E xtra capacity for the demands
of the heavy duty user
 Increased profitability and performance;
less trips to salt pile
 A
uger conveyor system improves
spreader pattern by providing
consistant material flow to spinner
 5 0% increased material capacity vs.
standard PV increases productivity
and minimizes number of reloads
 R
eplaceable conveyor floor for
easy service and maintenance
 1 2 gauge stainless steel sides/ends
provides durable and long lasting
construction
Full length auger.
Equipment
70" wide x (40", 44") tall x (8', 9') deep –
1160 to 1360 lbs, 6" auger
Capacity:
3 to 4.5 cubic yards
Construction:
Stainless Steel
Flow Rate:
4' to 30' spread pattern**
Steel Gauges:
12 gauge trough
Safety Features:
Warranty Details:
Options:
Nylon strap mounting kit, Tailgate latch kit, Chain oilers, Lights,
Cab protector/spill shield, Liquid spray systems, Hydraulic hose
kits, Hydraulic control valve stand, Hydraulic pump & reservoirs,
Tarp kit, Special paint, Remote battery connection harness,
Spinner extension, Additional 6” side extension, Various reservoirs
 D
irect drive conveyor reduces
moving parts for easier service
and extended life

Drop N Lock top screen provides
increased safety and reduced
maintenance
Available in stainless steel.
Materials
 Salt
 Salt / Sand Mix*
4
* Not recommended for straight sand.
swensonproducts.com
Gas drive
electric drive
hydraulic drive
Highlights
Equipment
70" wide x (40", 44") tall x (8', 9', 10') deep –
1170 to 1570 lbs
Capacity:
3 to 4.5 cubic yards
Construction:
Carbon & Stainless Steel
Flow Rate:
4' to 30' spread pattern**
Steel Gauges:
12 gauge trough
Safety Features:
Warranty Details:
Options:
Nylon strap mounting kit, Tailgate latch kit, Wireless controls, Drag chain,
Chain oilers, Lights, Cab protector/spill shield, Liquid spray systems,
Hydraulic hose kits, Hydraulic control valve stand, Hydraulic pump &
reservoirs, Tarp kit, Special paint, Remote battery connection harness,
Spinner extension, Additional 6” side extension, Various reservoirs
 E xtra capacity for the demands of the
heavy duty user increases profitability
and performance; less trips to salt pile
 4 5º slope on hopper sides allows
MDV SERIES
MDV™
 5 0% increased material capacity vs. standard
PV Increases productivity and minimizes
number of reloads
 S pring loaded front idler adjustments allow
for smoother conveyor operation; lets sprocket
move if there is a jam in the conveyor
R
eplaceable conveyor floor for easy service
and maintenance
 1 2 gauge carbon steel sides/ends provide
Materials
 Salt
 Sand
 Salt / Sand Mix
durable and long lasting construction
 D
rop N Lock top screen provides increased
safety and reduced maintenance
 S tandard wireless controls allows
for easy installation
 A
vailable in auger and drag chain driven
material movement systems
swensonproducts.com
5
Look to Swenson for
all your equipment needs.
Swenson offers a wide range of spreaders,
dump bodies and liquid application equipment
that can be customized to meet your exact
needs. It’s what sets us apart from the
competition. We know it’s critical to make
sure you have the proper equipment right
from the start.
Dump Bodies
Available in a wide variety of sizes from
9' to 15'; 5 to 16 cu. yds.
Insert Dump Beds
Available in 6.5' and 8' lengths;
1.5 and 2.24 cu. yds.
All Purpose Bodies
Available from 9' to 15'; and 2.5 to 16 cu. yds.
Anti-Icers
From 100 to 1,000+ gallon; perfect solution
for pre-treating pavement
Pre-Wet Systems
Available in hydraulic or electric; perfect
solution for improving material effectiveness
SWENSON GENUINE PARTS
Genuine Swenson Parts and
Accessories are in stock to
keep you up and running
from one season to the next –
all year round. We have a large
parts and accessories inventory. It is continuously maintained
for fast shipment to you or your authorized Swenson distributor.
Swenson Spreader LLC
127 Walnut St.
Lindenwood, IL 61049
phone 815.393.4455
fax 815.393.3320
An experienced Parts and Accessories Manager is always available
to provide you with detailed information on chains, belts, sprockets,
augers, motors, spinner assemblies, valves, and emergency parts
kits. Whether you own a small business or manage an entire
fleet, our job is keeping you on the job. Remember, only genuine
Swenson parts fit your Swenson equipment exactly.
www.swensonproducts.com

pickup v-box spreaders

Transcription

Similar documents

kik-step®

2014 Double Duty Pull Spreader Lit

MTU-GLR - Anthony Liftgates, Inc.

Skate Deterrents

double duty pull spreader

ISE Spec Sheet-Contractor 333 - InSinkErator

PG8AC, PGAC - Drinking Fountains

Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting

2014 GVM Double Duty Fusion Ready Spreader

Xzalt 8-Page Brochure - Highway Equipment Company

PICKUP V-BOX - Swenson Spreader