spindles and parts

Transcription

spindles and parts

DRIVE PARTS SPINDLES
TURFMASTER no
Description
Model
OEM no.
Image may not depict the actual size,
shape, etc.
AYP / HUSQVARNA / POULAN
AAB192115
AAB192116
AYP / Craftsman / Sears Spindle Assembly replaces
# 130794. Fits 36", 38", and 42" ventilated decks.
Used with star center hole blades. This is the correct
complete spindle assembly for the 128774 spindle
housing. Husqvarna CT130, CTH150, LR100,
LR110, LR111. LR12, LR120, LR121, LR122,
LR125, LRH125, LT112, LT120, LT1238, LT125,
LT130, LT1538, LT18542, LTH130, LTH1342,
LTH140, LTH145, LTH1742, LTH18542, LTH2042,
YT150, YT180, YT190, YTH130, YTH1342,
YTH145, YTH150, YTH1542, YTH160, YTH180,
YTH1842, 18542, YTH2042, YTH2242,
Quill Assy.
YTKH1542, Craftsman 917270750, 917271910
■ 7",
■ fits 36", 38" & 42" vent. Poulan PP1036, PP1136, PP11536, PO17542,
PO1452, PD17542, SO17542, PR17542, PP1338,
decks.
HD17542, PD185H42
■ use Spindle Housing
CT 130 (HECT130B) (954170017) (1999-10) Ride
AAB192116.
Mower
■ H 177.8 mm
CT 130 (HECT130C) (954170017) (2000-02) Ride
Mower
CT 130 (HECT130D) (954170017) (2001-08) Ride
Mower
CT 130 (HECT150B) (954170019) (2000-01) Ride
Mower
CTH 130 (954140100A) (1999-10) Ride Mower
CTH 150 (954140101A) (1999-10) Ride Mower
LR 110 (954001232C) (1995-08) Ride Mower
LR 111 (9540001212A) (1994-07) Ride Mower
LR 12 (HAR1236A) (954000752) (1994-05) Ride
Mower
Description: Quill Housing only. Replacement
housing for our AAB192115, AAB19237 quill /
spindle assembly. Fits 36", 38" and 42" ventilated
decks
CT130, CTH150, LR100, LR110,
LR111. LR12, LR120, LR121, LR122, LR125,
LRH125, LT112, LT120, LT1238, LT125, LT130,
Spindle Housing.
LT1538, LT18542, LTH130, LTH1342, LTH140,
■ for AAB192115,
LTH145, LTH1742, LTH18542, LTH2042, YT150,
AAB19237 Quill Assy.
YT180, YT190, YTH130, YTH1342, YTH145,
■ 36", 38" and 42" cut YTH150, YTH1542, YTH160, YTH180, YTH1842,
ventilated decks
18542, YTH2042, YTH2242, YTKH1542,
Husqvarna / AYP / Weedeater / Craftsman Mandrel
Housing (bare
housing) Fits 36”, 38” & 42” cut ride on lawnmowers
with ventilated decks using 5 point star centre hole
blades, including 42” cut CTH2642TE stamped
deck models.
130794,
180074,
532 13 07 94,
532 18 00 74 ,
539 11 01 58
Husqvarna
532 12 87-74
AYP 128774
AAB19216B
Spindle Shaft
■ 7",
■ with 2 Bearings, Screw,
Nut
and 3pcs
Washers,
■ for AAB192115
Description: Spindle Shaft Assembly. Replacement
shaft assembly for our AAB192115 quill / spindle
assembly. Fits 36" 38" and 42" vented decks. Star
shaped blade mount, double hex external spline for
pulley
AYP 133172,
137646,
Husqvarna
532 13 76 46 532
13 76 45
AAB19364
Nut,
■ fits AAB192115,
AAB19214, AAB19257
Quill Assy.
Size:
■ 1-1/4" OD built in
washer
■ 3/4" HT
■ 1/2"
■18 thread
Description: Lock Nut - Fits our AAB192115,
AAB19214, AAB19257 spindle shaft assemblies;
also fit our John Deere quill / spindle assemblies.
137266,
139729,
532137266,
532139729
Screw Bolt, Black,
■ 3/8"
■ 24
■ L 1-1/4"
■ fits AAB192115,
AAB19214
Husqvarna / Craftsman & Poulan Pro spindle
assembly mounting bolt / hex head self tapping
screw. 5/16” - 18 x 1 1/4” Long Fits: Husqvarna
Late model 30”, 38”, 42” , 46” , 48” & 54” cut
including - 30” cut LTH126, LTH19530, 38” cut
LT1597, LTH1797, LTH2038, LT19538, 42” cut
LTH1742T, LTH1842T, LTH2142D, YTH2042T 46”
cut YTH2546T 48” cut YTH2548XP. 54” cut
GTH2254XP, GTH2554XP, YTH2754T, YTH2754XP.
etc. Also fits: Craftsman 42”, 46”, 48” & 54” cut
models including - 42” cut YT3000 mod 28921,
28922, 28934, YT4000 mod. 28927. 46” cut YT3000
mod 28924, YT4000 mod 28928. 48” cut PTY9000
mod. 28972. 54” cut PTY9000 mod 28973. Also fits:
Poulan Pro Late Model 38” & 42” cut models
including - 38” cut PP14538, 17538HP. 42” cut
PP22044HP.
Husqvarna:
532 17 39-84, 532
13 87- 76
Craftsman:
173984
Poulan Pro:
173984
AYP: 173984,
138776, 157722
AAB19369
TURFMASTER(PTY)LTD Tel: 011 730 3400 Fax: 011 814 2345
E-mail: [email protected] Website: www.turfmaster.co.za
1
TURFMASTER no
Description
AAB192115
Spindle Shaft
■ 7"
Description: Spindle Shaft Assembly - Fits Quill
■ LH,
Assembly. Includes: (1) bearing and (2) washers.
■ with 2 Bearings, Screw,
Uses Left Hand Thread blade bolt & pulley nut.
Nut and 3pcs Washers,
■ for AAB19237
AAB19364
AAB192119
AAB192118
AAB192118B
AAB19364
AAB19369
Nut,
■ fits AAB192115,
AAB19214, AAB19237
■ Quill Assy.
Size:
■1-1/4" OD built in
washer
■ 3/4" HT
■ 1/2"
■18 thread
Spindle Housing.
■ Fits 44"and 50" decks.
■ For AAB19214 Quill
Assy.
■ use Spindle Housing
AAB192118B
Spindle Shaft
■ (NO BEARINGS)
■ For AAB19214,
AAB192119
■ Overall Height: 4 7/8”
(123mm)
Spindle Shaft.
■ With Bearing.
■ Fits AAB192119
Spindle Housing
■ OD: 3/4".
■ Length: 4-7/8"
Model
Description: Lock Nut - Fits spindle shaft
assemblies; also fit John Deere quill / spindle
assemblies
OEM no.
shape, etc.
165482
532 16 54 82
129729, 137266,
139729,
532137266,
532139729
Description: Replacement housing "only" for quill
137152,
assembly. Fits 44", 46" and 50" ventilated decks,
532 13 71 52
using star shaped (or Y shaped) centre hole blades.
Description: Husqvarna spindle shaft (includes
bottom bearing), Shaft features a star shaped blade
mount & double hex external spline for the
pulley.
1375531
Description: AYP Spindle Shaft accomodates star
center hole blades.. For 44" & 50" ventilated decks.
bearings included.
137553,
532137553
Nut,
■ fits AAB192115,
AAB19214, AAB19237
■ Quill Assy.
Size:
■ 1-1/4" OD built in
washer
■ 3/4" HT
■ 1/2"
■ 18 thread
Description: Lock Nut - Fits our 285-231, 285-234
and 285-237 spindle shaft assemblies; also fit our
John Deere quill / spindle assemblies
129729,
137266,
139729,
532137266,
532139729
Screw Bolt,
■ Black,
■ 3/8"
■ 24
■ L 1-1/4"
■ fits AAB192115,
AAB19214
■ Quill Assy.
2042 LS (96043004200) (2008-01) Ride Mower
2042 LS (96043004800) (2007-12) Ride Mower
2246 LS (96043004300) (2008-01) Ride Mower
2346 XLS (96043004500) (2008-01) Ride Mower
2348 LS (96043004400) (2008-01) Ride Mower
2348 LS (96043004900) (2008-03) Ride Mower
2748 GLS (96043004600) (2008-01) Ride Mower
2748 GLS (96043005000) (2008-03) Ride Mower
2754 GLS (96043004700) (2008-01) Ride Mower
GT 2254 (96023000500) (2005-05) Ride Mower
GT 2254 (96025000200) (2005-05) Ride Mower
GT 2254 (96025000201) (2005-05) Ride Mower
GT 2254 (96025000202) (2005-06) Ride Mower
GTH 2248 XPA (954567888) (2002-01) Ride Mower
GTH 2248 XPB (954567888) (2002-10) Ride Mower
GTH 2248 XPC (954567888) (2003-07) Ride Mower
GTH 2254 XP (96023000200) (2005-05) Ride Mower
GTH 2254 XP (96023000201) (2005-06) Ride Mower
GTH 2350 (GTHK2350A) (954568540) (2002-07)
Ride Mower
GTH 2448 T (917.279260) (960430009) (2006-06)
Ride Mower
GTH 2448 T (96043000900) (2006-06) Ride Mower
GTH 2448 T (96043000901) (2006-06) Ride Mower
GTH 2454 T (96043002300) (2006-06) Ride Mower
GTH 250 (HEGTH250A) (954170055) (2002-02)
Ride Mower
GTH 2548 (917.279100) (960230003) (2004-12)
AYP
138776, 157722,
173984
Husqvarna
532 13 87 76
532 15 77 22,
532 17 39 84
539 10 76 30
2
TURFMASTER no
AAB19150
AAB19370
Description
Models AYP decks. Fits Craftsman model#
944.606041 & 944.606042 / DYS 4500 series.
Husqvarna 2042lLS, 2246LS, 2346XLS,
LOYTH20F42T, LTH1538, YT1942T, YTH1542XP,
YTH18542, YTH20B42, YTH20F42T, YTH20K46,
YTH2042, YTH2146XP, YTH2242T, YTH2246
Craftsman 917276120, Poulan PBGT26H54,
Spindle Assy
PB26H54YT, PO1542LT, 380ZX,
■ 48" and 54" Decks
2348 LS (96043004400) (2008-01) Ride Mower
■ (Longer than 174356)
2348 LS (96043004900) (2008-03) Ride Mower
■ Found on 54" cut decks
2748 GLS (96043004600) (2008-01) Ride Mower
and 2007 (2) blade 46"
2748 GLS (96043005000) (2008-03) Ride Mower
cut decks;
2754 GLS (96043004700) (2008-01) Ride Mower
■ also found on newer
GT 2254 (96023000500) (2005-05) Ride Mower
42" cut
GT 2254 (96025000200) (2005-05) Ride Mower
■ Taller version of our
GT 2254 (96025000201) (2005-05) Ride Mower
??????.
GT 2254 (96025000202) (2005-06) Ride Mower
■ Measures: 7-1/4"
GTH 2254 XP (96023000200) (2005-05) Ride Mower
overall height.
GTH 2254 XP (96023000201) (2005-06) Ride Mower
■ Note the only difference
between 187292 and
192870 is that 187292
GTH 2448 T (917.279260) (960430009) (2006-06)
has a grease fitting
Ride Mower
GTH 2448 T (96043000900) (2006-06) Ride Mower
GTH 2448 T (96043000901) (2006-06) Ride Mower
GTH 2454 T (96043002300) (2006-06) Ride Mower
GTH 26 K 54 (96043003100) (2006-11) Ride Mower
GTH 26 K 54 T (96043001100) (2006-03) Ride
Models:
Screw Bolt, Black,
■ fits Quill 130794.
■ 5/16"
■18
■ L 1-1/4"
■ Self Tapping Bolt
CUB CADET
AAR11962
Model
Spindle Assembly Fits
some 50" decks,
■
OEM no.
shape, etc.
Husqvarna
532 18 72-92
532 19 28-70
Craftsman
192870
Poulan Pro:
532 19 28-70
192870
AYP: 187292
192870
2042 LS (96043004200) (2008-01) Ride Mower
2042 LS (96043004800) (2007-12) Ride Mower
2246 LS (96043004300) (2008-01) Ride Mower
2346 XLS (96043004500) (2008-01) Ride Mower
2348 LS (96043004400) (2008-01) Ride Mower
2348 LS (96043004900) (2008-03) Ride Mower
2748 GLS (96043004600) (2008-01) Ride Mower
2748 GLS (96043005000) (2008-03) Ride Mower
2754 GLS (96043004700) (2008-01) Ride Mower
GT 2254 (96023000500) (2005-05) Ride Mower
GT 2254 (96025000200) (2005-05) Ride Mower
GT 2254 (96025000201) (2005-05) Ride Mower
GT 2254 (96025000202) (2005-06) Ride Mower
138776, 157722,
GTH 2248 XPA (954567888) (2002-01) Ride Mower 173984
GTH 2248 XPB (954567888) (2002-10) Ride Mower 532 17 39 84
GTH 2248 XPC (954567888) (2003-07) Ride Mower
GTH 2254 XP (96023000200) (2005-05) Ride Mower
GTH 2254 XP (96023000201) (2005-06) Ride Mower
GTH 2350 (GTHK2350A) (954568540) (2002-07)
Ride Mower
GTH 2448 T (917.279260) (960430009) (2006-06)
Ride Mower
GTH 2448 T (96043000900) (2006-06) Ride Mower
GTH 2448 T (96043000901) (2006-06) Ride Mower
GTH 2454 T (96043002300) (2006-06) Ride Mower
GTH 250 (HEGTH250A) (954170055) (2002-02)
Ride Mower
Quill / Spindle Assembly - Fits 50" cut decks. Fits
blades with star center hole. Found on L1050,
LT1050, SLT1550 and RZT 50 riders with 50" deck &
SLT1554 with 54" deck. Spindle shaft has 12 point
spline on one end with a 6 point star on the other
Massey Ferguson / MTD / Cub Cadet / Troy Bilt
50” & 54” Cut Spindle Assembly. Fits: Massey
Ferguson 50” Cut deck MF50-23SD, MF50-22ZT
models. Fits: Cub Cadet 50” Cut i1050, LT, SLT &
RZT mowers with Z Force Decks using star centre
hole blades including: Cub Cadet 50” Cut i1050
17AF9BKP330 Z Turn 2008 models, 17AF9BK330
50” Cut hydrostatic drive 20hp 2008 models,
17A12ACP709 RZT series tractor 50” Cut 17hp
2007 models. Cub Cadet 54” Cut SLT1554
13AK11CK630 27hp Hydro 2006, SLT1554
13AK11BK330 23hp Hydro 2009 model ride on
lawnmowers. MTD Yardman 50” Cut 13AP604P371
Autodrive 23hp 2008 models, MTD RZT-50
17AF2ACP370 ZTR 22hp 2009 models. Troy Bilt
50” Cut 13AP60TP766 Auto Drive 23hp 2008
models, Troy Bilt RZT-50 17AF2ACP309 ZTR 22hp
2009 models
918-04125,
918-04125B
918-04126A,
918-04126,
618-04125,
618-04125B,
618-04126A,
618-04126
3
TURFMASTER no
AARM80-12-012
YAR618-0427A
YAR918-3129C
Description
Model
OEM no.
Cub Cadet 42" Deck
Spindle Assembly
■
Quill / Spindle Assembly - Fits 38" & 42" decks. Fits
blades with star center hole. Found on 1170, 1600,
1800 & RTZ mowers; also found on MTD / Troy Bilt
& White, 700 series. Troy Bilt models:
13AM762F765, 13AH762F752
Cub Cadet / MTD Yardman & Troy Bilt Spindle
Assembly.
Fits: Selected 42” cut decks using star centre hole
blades
and fitted with a 5 9/16” spindle pulley including Cub Cadet 42”
cut RZT 17, 17AA5A4G710 B&S 17hp ZTR 2004
models, RZT 42,
17BA5A4G630 B&S 17hp ZTR 2005 models, RZT
42, 17BA5A4G710
B&S 17hp ZTR 2006 models. MTD Yardman 42” cut
13AT604G671
B&S 18hp Auto Drive 2000 model ride on
lawnmower models.
Troy Bilt 42” cut 17AA5AAG766 B&S 19hp ZTR
2006 models,
13BX609G063 Kohler 16hp 2002 model ride on
lawnmower models.
Pulley Diam: 5 9/16” (141mm)
918-0427C, 9180427A,
9180427,
6180427C,
6180427A,
6180427,
9180324,
6180324A,
6180324
Spindle Assembly
■
Description: Quill / Spindle Assembly - Fits series
models 2130, 2146, 2155, 2164 and 2166, Z-Force, 918-3129C,
918-3129B,
GT series and LT series mowers with 38", 42" and
44" cut decks using round hole blades.
Cub Cadet 918-3129A,
Spindle Assembly fits Z-force, GT series & LT series 918-3129,
mowers with 38" & 42" deck using round hole blade. 618-3129C,
618-3129B,
Use our # ????? bearing & ????? race. Replaces
618-3129A,
Cub Cadet # 918-3129C, 918-3129A, 618-3129C,
618-3129A, 918-3129B, 918-3129, 618-3129B & 618- 618-3129
3129
shape, etc.
HUSQVARNA
AARM80-12-001
HUSTLER
AAR8488
AAR11452
AAR8488
Found on 54" cut decks and 2007 (2) blade 46" cut
decks; also found on newer 42" cut AYP decks. Fits
Craftsman model# 944.606041 & 944.606042 / DYS
4500 series. Taller version of our 285-415. 2348,
2748, 2754, GT2254, GTH2254, GTH2448,
GTH2554, GTH26K, GTH2648, GTH2654,
GTH2754, LGT2654, YTH1848, YTH2348,
YTH2454, LTG2554
2348 LS (96043004400) (2008-01) Ride Mower
2348 LS (96043004900) (2008-03) Ride Mower
2748 GLS (96043004600) (2008-01) Ride Mower
Husqvarna Spindle
2748 GLS (96043005000) (2008-03) Ride Mower
Assembly
■ fits 48" and 54" decks 2754 GLS (96043004700) (2008-01) Ride Mower
GT 2254 (96023000500) (2005-05) Ride Mower
Measures:
GT 2254 (96025000200) (2005-05) Ride Mower
■7-1/4" overall height.
■ Note the only difference GT 2254 (96025000201) (2005-05) Ride Mower
GT 2254 (96025000202) (2005-06) Ride Mower
between 187292 and
GTH 2254 XP (96023000200) (2005-05) Ride Mower
192870 is that 187292
GTH 2254 XP (96023000201) (2005-06) Ride Mower
has a grease fitting
GTH 2448 T (917.279260) (960430009) (2006-06)
Ride Mower
GTH 2448 T (96043000900) (2006-06) Ride Mower
GTH 2448 T (96043000901) (2006-06) Ride Mower
GTH 2454 T (96043002300) (2006-06) Ride Mower
GTH 26 K 54 (96043003100) (2006-11) Ride Mower
GTH 26 K 54 T (96043001100) (2006-03) Ride
187292
192870,
532 18 72 92
532 19 28 70,
539 11 20 57
Bearing
■
BEARING FITS TOP AND BOTTOM OF SPINDLE
077123 For
350595K
796235X
Fast Trak, Mini-Z, Super Mini Z
783506
BEARING FITS TOP AND BOTTOM OF SPINDLE
077123
Spindle Assembly
■ Fast Trak, Mini Z &
Super Mini Z
Bearing
■
JOHN DEERE
AAR11206
Quill Assy.
■ Fits L100, L110,
L120, L130 42", 48"
DECKS
■ 6-3/8" OVERALL HT
Description: Quill / Spindle assembly. Fits John
Deere L-100, L105, L107, L108, L110, L111, L118,
L120 and L130 models with 42" and 48" decks. Fits GY20050,
GY20785
current Home Depot models (2005 etc). Comes
complete with zerk / grease fitting.
Sabre, Scott, Sabo & L120 Lawn Tractors
4
TURFMASTER no
AAR14168
Description
Model
OEM no.
Spindle Assembly
■
48",54" & 60" mower decks for F620,F680 & F687 ZTRACKS
54", 60" & 72" mowers
4100,4200,4300,4400,4500,4600,4700 compact
utility tractors
M653 Mid mount Z- trak
60" & 72" side discharge mower decks (7 Iron) and
600L mcs for 1400/1500 series front mowers
62" & 72" rear discharge mower decks for 1400/1500
series front mowers
737 Mid-Mount Z-Trak
727 Mini-Frame Z-Trak
657 Quik-Trak mowers
TCA13807
777 Max-Frame Z-Trak
657A & 667A Quik-Trak
M655 & M665 Mid-Mount Z-Trak
667 Quick-Trak
757 Mid-Mount Z-Trak
797 Max-Frame Z-Trak
54",54C,60",62C,72" mower decks for
2210,4010,4110,4115,4210,4310,4410,4510,4610,4
710 compact utility tractors
Mower decks & material collection system for
X465,X475,X485,X495,X575,X585,X595,X700,X720,
X724,X728,X740,X744,X748
Quill Assy.
■ Shaft length: 5-3/8",
Splined shaft.
Quill / Spindle assembly - Fits MTD 38" and 42"
decks. Model series 600 and 805, also 42" models
700-739 and 750-769. Frame 310, 311, 312, 315,
316, 317, 318, 319, 320, 321, 322, 321, 324, 325,
326, 327, 328, 329, 330, 331, 332, 333, 334,
335, 336, 337, 338, 339, 340, 341, 342, 343,
344,, 345, 246, 347, 348, 349, 350, 351, 353,
354, 355, 356, 357, 432, 441, 450, 451 452,
455, 472, 506, 510, 530, 650, 836,
models
1990 to 1997 Lawn Tractors
135C451F382 (1995) Lawn Tractor
130-310D000 (1990) Lawn Tractor
130-311D000 (1990) Lawn Tractor
130-312D000 (1990) Lawn Tractor
130-313D000 (1990) Lawn Tractor
130-314D000 (1990) Lawn Tractor
130-315D000 (1990) Lawn Tractor
130-316D000 (1990) Lawn Tractor
130-317D000 (1990) Lawn Tractor
130-318D000 (1990) Lawn Tractor
130-319D000 (1990) Lawn Tractor
130-432-000 (Deck E & Deck F) (1990) Lawn Tractor
130-530D000 (1990) Lawn Tractor
130-530D009 (1990) Lawn Tractor
322-105 (1986) Lawn Tractor
130-650E000 (1990) Lawn Tractor
130-836-000 (1990) Lawn Tractor
130-445E352 (1990) Lawn Tractor
130-452F087 (1990) Lawn Tractor
130-452F129 (485-209) (1990) Lawn Tractor
shape, etc.
MTD
AAB19206
917-0900A
Replaces
717-0900,
717-0900A
5
TURFMASTER no
AAB19207
AAB19209
Description
Model
Frame 432, 433, 445, 450, 451, 452, 470, 471,
508, 600, 604, 640, 643, 650, 652, 653, 654,
658, 659, 660, 661, 663, 665, 667, 668, 669,
670, 671, 673, 675, 677, 678, 679, 684, 689,
695, 697, 699, 704, 734, 784, 805,
"G"and "F"
Deck
133H671F382 (1993) Lawn Tractor
133K679G382 (1993) Lawn Tractor
133P670G382 (1993) Lawn Tractor
136L673F382 (1996) Lawn Tractor
136M679G192 (1996) Lawn Tractor
Quill Assy.
■ fits models 600 and
135L673G382 (1995) Lawn Tractor
805.
■ 32" deck G, 38" deck 134L670G382 (1994) Lawn Tractor
F. 42"
■ 5-7/16" Splined Shaft
134Y451F382 (1994) Lawn Tractor
130-600-000 (Series 600) (1990) Lawn Tractor
130-640F013 (68433) (1990) Lawn Tractor
130-643F000 (1990) Lawn Tractor
136C450F129 (178-326) (1996) Lawn Tractor
136E470F023 (1996) Lawn Tractor
136G690G747 (1996) Lawn Tractor
130-650F000 (1990) Lawn Tractor
130-650G000 (1990) Lawn Tractor
130-652F000 (1990) Lawn Tractor
130-653F000 (1990) Lawn Tractor
Description: Quill / Spindle assembly - Fits MTD 44"
deck, outer quill; also fits 46" cut, both centre and
right hand quill. For 800 thru 849 series "H" decks.
Shaft length: 4.812", Splined shaft.
Frame 800,
801, 802, 803 804, 805, 806, 807, 808, 809, 849
130-800-000 (1990) Lawn Tractor
130-800H000 (1990) Lawn Tractor
130-800H009 (1990) Lawn Tractor
130-801-000 (1990) Lawn Tractor
130-802-000 (1990) Lawn Tractor
130-803-000 (1990) Lawn Tractor
130-804-000 (1990) Lawn Tractor
130-805-000 (1990) Lawn Tractor
Quill Assy.
130-806-000 (1990) Lawn Tractor
■ right hand side,
130-807-000 (1990) Lawn Tractor
■ center quill.
130-808-000 (1990) Lawn Tractor
■ For "H" decks
■ 4-13/16" Splined Shaft 130-808H000 (1990) Lawn Tractor
130-809-000 (1990) Lawn Tractor
130-809H000 (1990) Lawn Tractor
130824H (1990) Lawn Tractor
130-800H031 (1990) Lawn Tractor
130-802H206 (1990) Lawn Tractor
140-849H023 (1990) Lawn Tractor
190-806-000 (1989) Lawn Tractor
190-846-000 (1989) Lawn Tractor
131-800H000 (Deck H) (1991) Lawn Tractor
OEM no.
shape, etc.
753-05319
Replaces
7170906,
7170906A,
7170916,
9170906A, 9170916
917-0912,
717-0912
6
TURFMASTER no
AAB19208
AAR9288
Description
Model
cut deck, centre quill. Use with double pulley; also fits
46" cut, left hand quill. For 800 thru 849 series "H"
decks. Shaft length: 6-3/8", Splined shaft
Frame
800, 801, 802, 803 804, 805, 806, 807, 808, 809,
824, 846, 849
130-800-000 (1990) Lawn Tractor
130-800H000 (1990) Lawn Tractor
130-800H009 (1990) Lawn Tractor
130-801-000 (1990) Lawn Tractor
130-802-000 (1990) Lawn Tractor
130-803-000 (1990) Lawn Tractor
130-804-000 (1990) Lawn Tractor
Quill Assy.
130-805-000 (1990) Lawn Tractor
■ left hand side quill
130-806-000 (1990) Lawn Tractor
■ for "H" decks
130-807-000 (1990) Lawn Tractor
■ 6-5/16" Splined Shaft 130-808-000 (1990) Lawn Tractor
130-808H000 (1990) Lawn Tractor
130-809-000 (1990) Lawn Tractor
130-809H000 (1990) Lawn Tractor
130824H (1990) Lawn Tractor
130-800H031 (1990) Lawn Tractor
130-802H206 (1990) Lawn Tractor
140-849H023 (1990) Lawn Tractor
190-806-000 (1989) Lawn Tractor
190-846-000 (1989) Lawn Tractor
and 42" decks. Fits star hole blades. Newest style
"X" housing, 1998 and newer. Pulley NOT included
Frame 450, 451, 453, 650, 660, 662, 683, 685,
688, 694, 695, 698, 1997 and newer
13AC650F000 (2004) Lawn Tractor
13AD685G000 (2004) Lawn Tractor
Spindle assy.
■ 38'' 42" Deck
■ with 6 point star centre 13AF685G700 (2004) Lawn Tractor
hole.
13AF688G722 (2004) Lawn Tractor
■ 600 Seris 1997 &
newer models
13AJ698G300 (2004) Lawn Tractor
13AJ698G722 (2004) Lawn Tractor
13AD688G300 (2004) Lawn Tractor Parts
13AJ688G722 (2004) Lawn Tractor Parts
13AH660F382 (1998) Lawn Tractor
13A5453F733 (1997) Lawn Tractor
13A5453F033 (1997) Lawn Tractor
13A5453F733 (1998) D112Lawn Tractor
13AE451F033 (1998) Lawn Tractor
13BH660F033 (2001) Lawn Tractor
OEM no.
shape, etc.
717-0913,
917-0913
918-0138C
Replaces
618-0138,
618-0142,
918-0138,
918-0138A,
918-0142,
918-0142A
7
TURFMASTER no
AAB19231
AAB19228
Description
Model
Quill / Spindle assembly.
Frame 604, 614,
617, 618, 809, 825, 848 Lawn Tractors
13AT618H300 (2003) Lawn Tractor Parts
14AU848H300 (2002) Garden Tractor
13AQ617H118 (2003) Lawn Tractor
14AK825H033 (1997) Garden Tractor
14AS825H033 (1997) Garden Tractor
13AT618H300 (2004) Lawn Tractor
Spindle assy.
■ 46'' Deck
■ L.H
■ 6point star hole blade 13AT618H730 (2004) Lawn Tractor
■ for 1997 & newer
models.
■ Overall Height: 6.000". 13AT618H371 (2004) Lawn Tractor
■ Fits left hand side on
MTD 46" deck, 800
series. (1997 and newer). 13AT618H713 (2004) Lawn Tractor
Fits star hole blades.
Spindle assy
■ 46" 16/18 hp
■ Stare hole blades from Description: Quill / Spindle assembly - For MTD 46"
1994-1997
deck. Fits star hole blades. Left hand spindle for 800
■ For double pulley
series. (1994 thru 1997).
spindle.
146S848H372 (1996) Lawn Mower
■ (spindle shaft AAST285- 143p828h118 Tractor Mower
336)
■ 5 - 3/4"High For deck D
Uses single pulley; 1993 thru 1996, (3) for 600 series
riders or (2) for 800 series riders.
Frame
600, 668, 670, 675, 678, 679, 695, 698, 699,
849,
133P679H382 (1993) Lawn Tractor
136G679H023 (1996) Lawn Tractor
135-600-000 (1995) Lawn Tractor
135G679H000 (1995) Lawn Tractor
135O695H352 (1995) Lawn Tractor
136O695H352 (1628279) (1996) Lawn Tractor
136P695H352 (1670860) (1996) Lawn Tractor
136Q695H352 (1996) Lawn Tractor
143P849H033 (7008824) (1993) Garden Tractor
144P849H033 (1994) Garden Tractor
145Q849H033 (1995) Garden Tractor
133Q668H702 (1250695) (1993) Lawn Tractor
133Q678H736 (4803110) (1993) Lawn Tractor
OEM no.
918-0241B
Replaces
918-0431C,
618-0431,
918-0431B,
918-0431,
918-0241,
618-0241,
918-0241
918-0117B
Replaces
618-0112,
618-0117,
918-0117,
AARM80-11-731
Spindle assy
■ 42", 46" 16/18 hp ,
■ star hole blades from
1994-1997.
■ 4 - 9/16"HEIGH
■ 600 and 800 series
■ RIGHT HAND and
senter
AARM80-11-731
Spindle assy Measures:
■ 4-1/4" Overall Height,
■ Bottom spline OD: 1",
■ Top spline OD: 3/4",
918-0118
■ End of threaded shaft
decks - Right hand and Centre spindle.
to metal plate: 2-1/8",
■ End of splined shaft to
metal plate: 2-3/16",
■ 5/8"-18 THD Thread.
shape, etc.
918-0116C
Replaces
618-0111,
918-0111,
618-0116P,
618-0116,
918-0116
8
TURFMASTER no
AAR9727
AAR9286
AAST285-105
Description
Model
Spindle assy.
■ Left hand side spindle.
Measures:
■ 6" Overall Height.
■ Bottom spline OD: 1", Description: Quill / Spindle assembly - Fits MTD 50"
■ Top spline OD: 3/4",
decks ■ End of threaded shaft
to metal plate: 3-7/8",
■ End of splined shaft to
metal plate: 2-3/16",
■ 5/8"-18 THD Thread.
Description: Quill / Spindle assembly without pulley.
(Right and Center Spindle). Fits MTD 46" decks and
also used on newer Toro lawn tractors. For 600 &
800 series mowers, 1997 to current. Fits star hole
blades. Takes: (3) for 600 series riders. For 800
series tractors you require: (2 )
Frame 604,
605, 614. 617, 618, 683, 688, 694, 698, 771,
772, 795, 808, 825, 848, Lawn Tractors 1997 2008
13AG688H300 (2004) Lawn Tractor
31AT605H718 (2006) Pro Tractor
Spindle assy.
13AL771H004 (2009) Lawn Tractor
■ 46'' Deck
■ R.H & centre 6 point
■ star hole blade
■ for 1997 and newer
13AT618H300 (2003) Lawn Tractor Parts
models (2000)
14AG808H300 (2004) Garden Tractor
■ 5 - 1/8"heigh
14AT808H722 (2004) Garden Tractor
14AT808H300 (2003) Garden Tractor
14AU848H300 (2002) Garden Tractor
13AQ617H118 (2003) Lawn Tractor
13A6698H033 (1998) Lawn Tractor
14AK825H033 (1997) Garden Tractor
14AS825H033 (1997) Garden Tractor
13AT605H718 (2006) 46" Pro Tractor
14AI808H718 (2004) 46" Pro Tractor
14AG808H722 (2004) Garden Tractor
Description: Quill / Spindle assembly - For MTD 42"
deck. Fits later models.
Frame 604, 608, 609,
614, 624 13AA609G063
13AL608G300 (2002) Lawn Tractor
13AS608G033 (2000) Lawn Tractor
13AK608G033 (2001) Lawn Tractor
13AS608G033 (2001) Lawn Tractor
13AQ609G033 (2003) Lawn Tractor
Spindle assy. Measures: 13AD608G401 (2003) Lawn Tractor
■ 4-7/8" overall height.
■ Fits star hole blades.
■ Left hand spindle for
600 series.
■ Includes: pulley
■ Fits later star hole
blades
shape, etc.
OEM no.
918-0119,
918-0240C
Replaces
6180240,
6180240A,
6180430,
6180430A, 9180240,
9180430A,
9180430B,
9180430C,
9180430,
Toro
1120311
918-0574C
Replaces ,
0574,
618-0565,
918-0574C
918-
9
TURFMASTER no
Description
AAST419-500
Spindle Blade Hex Nut
for
Size:
■ 5/8"-18 UNF thread
AAR12219
Spindle assy.
■ Fits blades with star
center hole.
■ 12 point spline on
pulley end
■ with a 6 point star on
the blade end.
■ Overall height: 6-1/2".
Model
Description:
254-546-000 (1994) Edger
254-556-000 (1994) Edger
255-546-000 (1995) Edger
255-556-000 (1995) Edger
13705S (1985) Lawn Tractor
195-797-000 (1985) Lawn Tractor
195-798-000 (1985) Lawn Tractor
195-799-000 (1985) Lawn Tractor
195-802-000 (1985) Lawn Tractor
13514C (1986) Lawn Tractor
133H671F382 (1993) Lawn Tractor
133K679G382 (1993) Lawn Tractor
133P670G382 (1993) Lawn Tractor
136B560B302 (1996) Lawn Tractor
245-635-000 (1985) Log Splitter
130-310D000 (1990) Lawn Tractor
130-311D000 (1990) Lawn Tractor
Quill / Spindle Assembly. For Cub Cadet LT1040,
LT1042 and RZT mowers with 42" decks. Also Toro
models: LX420 & LX425 or 13ZX60RG544.
Frame 761, 771, 791
13A3761G700 (2005) Lawn Tractor
31AO791G718 (2005) Pro Tractor
17AC2ACG004 RZT-42 (2008) 17-Z-Series
17AE2ACG004 (2009) 17-Z-Series
17AF2ACP004 (2009) 17-Z-Series
13AO791G718 (2005) 42" Lawn Tractor
shape, etc.
OEM no.
712-0318,
712-0417
912-0318
918-0624A
Replaces
0559,
0624,
918-0624,
918-0559,
918-0624,
918-0659A
Toro
1120460
618618-
10
TURFMASTER no
AAR9145
AAB192128
Description
Model
OEM no.
shape, etc.
Description: Quill Brake Disc - For drive pulleys on
MTD 38" and 42". Model series 600, 800, 805, 739,
750-769
135-669-000 (1985) Lawn Tractor
Spindle brake disc
■ for drive pulley Fits 38" 130-310D000 (1990) Lawn Tractor
09322
130-311D000 (1990) Lawn Tractor
& 42" cut
130-312D000 (1990) Lawn Tractor
130-313D000 (1990) Lawn Tractor
130-314D000 (1990) Lawn Tractor
130-315D000 (1990) Lawn Tractor
130-316D000 (1990) Lawn Tractor
130-317D000 (1990) Lawn Tractor
130-318D000 (1990) Lawn Tractor
130-319D000 (1990) Lawn Tractor
130-600-000 (Series 600) (1990) Lawn Tractor
196-800-000 (1986) Lawn Tractor
Spindle Shaft,
.
Measures:
Description: Variator Shaft - Fits MTD / White
738-0569,
■ 3-3/4" L
938-0569
models 666 and 686. Also found on Yardman
■ .562" diameter
■ 3/8"-24 thread.
MURRAY
AAB192120B
Quill Assy,
Measures:
5/8" ID
■ 2-5/8" HT
AAB19210B
Quill Assy.
Measures:
■ 7" OD
■ Also fits Stihl Viking
MT432
AAR8308
Shaft Spacer
■ 42" Deck
Quill Assembly for Murray. For new style decks. Fits models
30500X92A and 30534X1A. For 30" rear engine riders.
30502, 30503, 30505, 30544, 30576, 30577, 31720,
31722,
31720x11B (2000) 30" Lawn Tractor
30503x11A (2000) 30" Rear Engine Lawn Tractor
■
30577x31B (2000) 30" Rear Engine Lawn Tractor
31722x95A (1999) 31" Lawn Tractor
31720x11C (1999) 31" Lawn Tractor
31720x51C (1999) 31" Lawn Tractor
30503x11A (1999) 30" Rear Engine Rider
30576x10D (1999) 30" Rear Engine Rider
30544X92D (1996) Rear Engine Riders
Quill / Spindle Assembly for Murray. Comes complete with
bearings, spacer and grease fitting. Fits model 38608X12E.
LT, GT rail frame
405014x92A (2002) 40" Lawn Tractor
405015x92A (2002) 40" Lawn Tractor
40508x92E (2002) 40" Lawn Tractor
42515x92B (2002) 42" Lawn Tractor
42516x92B (2002) 42" Lawn Tractor
42598x92A (2002) 42" Lawn Tractor
461007x92A (2001) 46" Lawn Tractor
46104x8C (2001) 46" Lawn Tractor
521613x89A (2001) 52" Lawn Tractor
38502x51E (2001) 38" Lawn Tractor
38502x98D (2001) 38" Lawn Tractor
46102x6B (2000) 46" Lawn Tractor
46107x92A (2000) 46" Lawn Tractor
46103B (2000) 46" Lawn Tractor
52101x92A (2000) 52" Lawn Tractor
46104x14A (2000) 46" Lawn Tractor
52161x89B (2000) 52" Lawn Tractor
38502x51D (2000) 38" Lawn Tractor
38502x52A (2000) 38" Lawn Tractor
38711x42A (2000) 38" Lawn Tractor
38502x86B (2000) 38" Lawn Tractor
38560x81A (2000) 38" Lawn Tractor
38502x98C (2000) 38" Lawn Tractor
38711x67C (2000) 38" Lawn Tractor
38711x73C (2000) 38" Lawn Tractor
38710x99A (2000) 38" Lawn Tractor
46106x89B (2000) 46" Lawn Tractor
40560x50C (2000) 40" Lawn Tractor
8-38222,
7-39004
55962,
55962MA,
455962,
455962MA,
55962E701
492574MA
Replaces 20551,
24384,
24385,
692574MA,
90905,
090905MA,
92574,
92574MA,
492574 Stihl
Viking 6121 009
2574
23213
11
TURFMASTER no
Description
Model
OEM no.
AAB192123
Spindle Shaft,
Measures:
■ 6-1/2" L
■ 5/8" OD,
■Threads: 1/2"-20 UNF,
■ shaft has (3) 5/32"
keyways.
■ (#505 woodruff
keyseats)
Description: Jackshaft for Murray. Long shaft for
1978 thru 1988 - 36" cut.
21024MA, 20616
AAB192131
Spindle Shaft,
Measures:
■ 6-1/8" L
■ 5/8" OD,
■ Threads: 1/2"-20 UNF,
■ shaft has (2) 5/32"
keyways.
■ (#505 woodruff
keyseats)
AAB192129
Spindle Shaft,
Measures:
■ 6-3/8" L
Description: Jackshaft (splined) - Fits Murray 46"
■ 5/8" OD,
and 30" cut Riders.
■ Shoulder OD: 1-1/4"
■ Spline OD: .600",
■ Threads: 9/16"-18 UNF.
91921,
491921
AAB192126
Spindle Shaft,
Measures:
Description: Jackshaft (splined) - Fits Murray 36",
■7-3/4" L
■ 5/8" OD,
38", 40" and 42" cut splined shaft models.
■ Shoulder OD: 1-1/4",
Use nut 15X100MA AAB19361
■ Spline OD: .600",
■ Threads: 9/16"-18 UNF
Murray
91922,
491922 ,
491922MA
AAR9906
Spindle Jackshaft
■ fits 38'', 46'', 48'' & 50''
LTdecks. 46" + 52" GT
rail frame Nut AAR8901
Measures:
■ 7.03" long,
■ splined both ends.
774091,
774091MA
94129,
094129,
Scotts
774091,
94129
AAB19361
Nut,
Description: Jackshaft hex nut for riding mowers.
■ 9/16"-18 UNF Thread,
Fits splined jackshafts.
■ fits Splined Jackshafts
15x100
15X100MA
AAR5722
Spindle Assembly
Size:
■ 5/8" ID
■ 1" OD shaft
■ 7-3/16" overall HT;
■ Keyway: 1/4".
■ With grease fitting
Description: Quill / Spindle Assembly - Fits all Scag
walk behind mowers. Shaft Length: 7-3/16". Ferris
36", 48" and 61" walk behind mowers, Snapper 36",
48" and 60" Pro series walk behinds.
46020, 461663,
46400,
46631 Snapper
52457
AAR9153
Spindle Assembly
■ CAST IRON
Shaft OD: 1"
■ Shaft ID: 5/8"
■ Ht: 7-3/16"
■ 1/4" Key Way
■ w/Grease Fitting
WRIGHT MFG 48", 52" and 61" decks, serial
numbers 20425 and higher for Wright Stander
mowers (NOT the Sentar) With grease fitting
46020, 461663,
46400,
46631
461397
WRIGHT MFG
71460007
Description: Jackshaft for Murray. Long shaft for
1976 thru 1990 - 42" cut.
Description: Jackshaft Assembly for Murray. Fits
38", 40", 42", 46", 48" & 50" LT rail frame, 46" GT rail
frame and old style 52" GT and 30" export lawn
tractors, also fits Scotts 42" LT and 52" GR rail frame
tractors.
shape, etc.
23180
SCAG
AAR5999
■
Spinbdle Shaft
Size:
■ Pulley OD:1"
■ ID: 5/8"
■ OD: .987"
■ Length: 7-3/16"
43001-02
Jacobsen 182246
WRIGHT
AAR5722
■ ID:5/8",
■ OD:1",
■ Height:7 3/16" overall,
■ 1/4" keyway, With
grease fitting
FIXED DECK STANDER 48",52",61" W/ SERIAL
49704 & BELOW48", 52" and 61" decks, serial
numbers 20425 and higher for Wright Stander
mowers (NOT the Sentar)
ENCORE
71460007
FERRIS 1530301
FERRIS 5030301
LESCO 050194
SCAG 46020
46400
WRIGHT MFG
71460007
285-201 / 5722 /
82-309
12

spindles and parts

Transcription

Similar documents

pulleys - Turfmaster

Primer Bulb - Turfmaster

Genuine Husqvarna Accessories

Banta CONTROLS

air filters

carburetor spares

europe.yamaha.com /backtoschool

ILLUSTRATED PARTS MANUAL

carburetor kits four stroke

Cables - Turfmaster

chainsaw parts and chain