Positioning Devices - Holmarc Opto

Transcription

HOLMARC
HOLMARC
Positioning Devices
79
80
81
82
83
84
85
86
87
89
89
90
90
91
91
91
92
92
93
94
94
95
96
97
97
98
99
99
100
100
101
102
103
LONG TRAVEL TRANSLATION STAGES
MLS – Series Manual Positioners
MLTS Series Manual Positioners
LTTS Series Manual Translation Stages
LT TS50 Series
LT TS-75 Series
LT TS-125 Series
LT TS-150 Series
LT TS-200 Series
LT TS-250 Series
97
97
98
99
99
100
100
101
102
103
OPTICAL TABLES, BREADBOARDS,
RAILS & CARRIERS
TRANSLATION STAGES
TS35 Series
TS50 Series
TS65 Series
TS90 Series
TSQ90 Series
TS120 Series
Side Drive Translation Stage
Precision 'V' Groove Guide Stages
Vertical Translation Stages
VTS-25 Series
VTS-10 Series
VTS-5 Series
Multi axes Translation Stages
XYZCTS50 Series
XYZCTS90 Series
XY MOVING PLATFORM
XYTSM Series
XYTSWM Series XY Moving Platform
HEAVY DUTY XY MOVING PLATFORM
XYTS Series XY Moving Platform
XYTSW Series XY moving Stage
LONG TRAVEL TRANSLATION STAGES
MLS – Series Manual Positioners
MLTS Series Manual Positioners
LT TS50 Series
LT TS-75 Series
LT TS-125 Series
LT TS-150 Series
LT TS-200 Series
LT TS-250 Series
OPTOMECHANICS
In case our standard positioners do not fit to the application
requirements, we custom design and manufacture stages by working
along with our customers.
CONTROL ELECTRONICS AND SOFTWAR
104
Micro Position Controller
104
Multi Axis Positioning
104
Handheld Motion Control System
104
Software
105
Motorized Position Controller Ordering Information 105
Closed Loop System
106
Motorized Translation stage Ordering Information 106
MOTORIZED TRANSLATION STAGES
107
Linear Guides
107
Drive
107
Actuator
107
Motorized Actuator
108
Vacuum Compatible Motorized Mirror Mount
108
MTS – Series Motorized Positioners
109
Custom Miniature Motorized Positioners
109
LMS – Series Motorized Positioners
110
LTMS Series Motorized positioners
111
RCMTS Series Motorized Translation Stages
112
RCMTS-50 Series
112
XYZ & Rotation Assembly
113
RCMTS-75 Series
113
RCMTS-125 Series
114
RCMTS-150 Series
116
RCMTS-200 Series
117
RCMTS-250 Series
119
Belt Driven Motorized Translation Stages
120
XY MOVING PLATFORM
121
MXYTS Series Combi : XY Moving Platform
121
MXYTSW Series XY Stage
122
MULTI AXIS LINEAR POSITIONING SYSTEM
123
GTSNDT Series
123
SGTS Series
123
CUSTOM ENGINEERED POSITIONING
124
Rotational MOTION
125
GM Series-Goniometer
126
CGM series Combi-Goniometer
126
RSC Series Precision Rotation Stage
127
Rotary Mount
127
RS Series Precision Rotation Stage
128
HDRSC series Heavy duty rotation stage
129
HDRS series Heavy duty rotation stage
129
WRSC Series Rotation stage
130
WRS series Rotation stage
130
MRSC Series Motorized Rotation Stage
131
MRS Series Motorized Rotation Stage
132
MRSH Series Motorized Heavy Duty Rotation
133
UV-VIS-IR OPTICS
Motorized stages from holmarc are general purpose positioners for
wide range of applications in manufacturing and research. There are
hundreds of models to choose from. Holmarc manufactures these
stages with traverse ranging from 5 mm to 500 mm with size and load
capacity varying proportionately.
POSITIONING DEVICES
4
TABLE OF CONTENTS
RESEARCH TOOLS
PHYSICS INSTRUMENTS
001
PAGE
VISIT US @
www.holmarc.com
E-mail: [email protected] | [email protected]
0
Ph: 91-484-2540075
Fax: 91-484-2540882
141
001
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
TS-35 Translation Stage
Travel: 6mm
Carriage Size : 35mmx35mm
Load Capacity :3kg vertical on X axis
Drive: Option-1) Micrometer
Option-2) Hexagonal Socket Lead screw
RAILS & CARRIERS
Specifications
► Straight Line Accuracy: 5μm
► Micrometer Linear Resolution:10 μm
► Lead Screw Linear Resolution : 0.25mm/ Rotation
► Guide way: Precision Ball Bearing Guide Way
► Construction: Aluminum Alloy B51S
► Finish: Black Anodized
► Mounting Holes : M4 Tapped Holes on Carriage
: M6 Tapped Hole on Top and Bottom
: M4 CBR Hole for Mount the Stage to Base Plate
► Mounting Options: Post Mountable by Using M6 Thread
: Breadboard Mounting by Using Base Plate
► Design: Modular Design for Multi Axis Configurations
Configuration
X
XY
XYZ
Z
XZ
Load Capacity (kg)
3
3
0.5
0.5
0.5
XY configuration
XYZ configuration
OPTOMECHANICS
Allen key socket lead screw drive
Length:L- 6mm
Linear resolution: 0.3 mm/rotation
Allen key socket dim : 3mm
Z configuration
Micrometer
Length:L- 6mm
UV-VIS-IR OPTICS
Linear resolution: 0.01 mm/Div
Lead screw pitch : 0.5mm
XY Configuration
XYZ Configuration
Drive:
Micrometer or
Hexagonal Socket
Lead screw
XZ configuration
Angle
Bracket
POSITIONING DEVICES
Adapter Plate
Z Configuration
Base Plate
XZ Configuration
002
PHYSICS INSTRUMENTS
Model No:
Allen Key Socket
Lead Screw
Drive
TS35-AK-01
TS35-AK-02
TS35-AK-03
TS35-AK-04
TS35-AK-05
Model No:
Micrometer Drive
Configuration
TS35-Mu10-01
TS35-Mu10-02
TS35-Mu10-03
TS35-Mu10-04
TS35-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Accessories >>
Base Plate
BPTS-35
Angle Bracket
ABTS-35
Adapter Plate
Z Axis Angle Bracket
with Base Plate
APTS-35
ABZTS-35
PAGE
142
002
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Travel: 10mm
Load Capacity : 5kg vertical on X axis
Drive: Micrometer
Configuration
X
XY
XYZ
Z
XZ
Load Capacity (kg)
5
5
2
2
2
XY configuration
XYZ configuration
Micrometer
OPTOMECHANICS
► Straight Line Accuracy: 7.5μm
: M6 Tapped Hole on Top and Bottom
► Mounting Options: Post Mountable by Using M6 Thread
RAILS & CARRIERS
Specifications
Length:L- 35+/- 5 mm
XY Configuration
Z configuration
UV-VIS-IR OPTICS
Drive:
Micrometer or
Lead screw
XYZ Configuration
Angle Bracket
XZ configuration
POSITIONING DEVICES
Adapter
Plate
Z Configuration
XZ Configuration
003
Model No:
Micrometer
Drive
TS50-Mu10-01
Ts50-Mu10-02
Ts50-Mu10-03
Ts50-Mu10-04
Ts50-Mu10-05
Configuration
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Accessories >>
Base Plate
BPTS-35
PHYSICS INSTRUMENTS
Base Plate
Angle Bracket
ABTS-35
Adapter Plate
with Base Plate
APTS-35
ABZTS-35
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
143
003
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Travel: 15mm
Load Capacity: 20 kg vertical on X axis
Drive: Micrometer/ digital micrometer
Specifications
RAILS & CARRIERS
or breadboard
► Mounting Options: Directly Mount to Breadboard by Using M6 Screws
XY configuration
OPTOMECHANICS
Configuration Load Capacity (kg)
X
20
XY
20
XYZ
6
Z
6
XZ
6
Drive:
Micrometer Or
Lead screw
XYZ configuration
Z configuration
UV-VIS-IR OPTICS
Digital Micrometer
XY Configuration
XYZ Configuration
XZ configuration
POSITIONING DEVICES
Accessories >>
Z Configuration
Adapter Plate
XZ Configuration
APTS-65
Base Plate
Angle Bracket
ABTS-65
with Base Plate
ABZTS-65
BPTS-65
004
Micrometer
PHYSICS INSTRUMENTS
Model No:
Micrometer
Drive
TS65-Mu10-01
TS65-Mu10-02
TS65-Mu10-03
TS65-Mu10-04
TS65-Mu10-05
Model No:
Digital Micrometer
Drive
TS65-DMu10-01
TS65-DMu10-02
TS65-DMu10-03
TS65-DMu10-04
TS65-DMu10-05
Configuration
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Base Qty Adapter
Plate
Plate
1
1
1
1
Qty
Angle
Bracket
Qty
Z Axis Angle
Qty
Bracket With
Base Plate
Length:L - 42.5 +/- 7.5
Lead resolution: 0.3 mm/rotation
Lead screw pitch : 80Tpi
Digital Micro Meter
1
1
1
2
1
1
Length:L- 108
1
Linear resolution: 0.01 mm
PAGE
144
004
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Travel: 25mm
Load Capacity : 20kg vertical on X Axis
or breadboard
20
X
20
XY
6
XYZ
6
Z
6
XZ
RAILS & CARRIERS
Specifications
XY configuration
XYZ configuration
OPTOMECHANICS
Drive:
Micrometer Or
Digital Micrometer
Angle Bracket
Z configuration
XYZ Configuration
UV-VIS-IR OPTICS
XY Configuration
XZ configuration
Base Plate
XZ Configuration
Accessories >>
Angle Bracket
ABTS-90
Base Plate
Adapter Plate
with Base Plate
BPTS-90
APTS-90
ABZTS-90
Model No:
Micrometer
Drive
TS90-Mu10-01
TS90-Mu10-02
TS90-Mu10-03
TS90-Mu10-04
TS90-Mu10-05
Model No:
Digital Micrometer Configuration
Drive
X Axis
TS90-DMu-01
XY Axis
TS90-DMu-02
XYZ Axis
TS90-DMu-03
Z Axis
TS90-DMu-04
XZ Axis
TS90-DMu-05
Digital Micrometer
Length:L- 108
Resolution: 0.01 mm
Lead screw pitch : 0.5 mm
Base Qty Adapter
Plate
Plate
1
1
1
1
Qty
Angle
Bracket
Qty
Z Axis Angle
Bracket With
Base Plate
Qty
MicroMeter
Length:L-65 +/- 12.5
1
1
1
2
1
1
1
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
005
145
005
PHYSICS INSTRUMENTS
Z Configuration
POSITIONING DEVICES
Long Travel Translation Stage
Model No:
Refer Page:
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
TSQ-90 Translation Stage
Travel: 25mm
Load Capacity : 20kg vertical on X Axis
Specifications
RAILS & CARRIERS
► Straight Line Accuracy: 10 μm
or breadboard
20
X
20
XY
6
XYZ
6
Z
6
XZ
XY configuration
OPTOMECHANICS
XYZ configuration
Adapter Plate
Digital Micrometer
Z configuration
UV-VIS-IR OPTICS
XY Configuration
XYZ Configuration
Drive:
Micrometer Or
Lead screw
XZ configuration
Base Plate
POSITIONING DEVICES
XZ Configuration
Z Configuration
Accessories >>
Base Plate
BPTSQ-90
006
PHYSICS INSTRUMENTS
Model No:
Micrometer
Drive
TSQ90-Mu10-01
TSQ90-Mu10-02
TSQ90-Mu10-03
TSQ90-Mu10-04
TSQ90-Mu10-05
Angle Bracket
ABTS-90
with Base Plate
Adapter Plate
Digital Micrometer
ABZTSQ-90
APTSQ-90
Model No:
Digital Micrometer
Drive
TSQ90-DMu-01
TSQ90-DMu-02
TSQ90-DMu-03
TSQ90-DMu-04
TSQ90-DMu-05
Vertical Traslation Stage
Model NO..XXX
Refer Page
Length:L- 108
Resolution: 0.01 mm
Lead screw pitch : 0.5 mm
Configuration
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Base Qty Adapter
Plate
Plate
1
1
1
1
Qty
Angle
Bracket
Qty
Z Axis Angle
Qty
Bracket With
Base Plate
MicroMeter
Length:L-65 +/- 12.5
1
1
1
2
1
1
1
PAGE
146
006
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Travel: 50mm
Load Capacity : 20kg vertical on X axis
Drive: Micrometer
: ±10 μm for total travel length
: Precision ball guide way
: Micrometer
: Aluminium alloy B51S
: Black anodized
: M6 tapped holes at 25mm grid
: M6 tapped holes
: With base plate/ direct
: Modular Design for Multi Axis
Configurations
Configuration
X
XY
XYZ
Z
XZ
Load Capacity (kg)
20
20
8
8
8
XY configuration
Drive:
Micrometer Or
Lead screw
XYZ Configuration
XYZ configuration
OPTOMECHANICS
►Straight line accuracy
►Guide way
► Drive
► Construction
►Finish
► Tapped Holes on Carriage
► Mounting Holes on the base plate
►Bread Board Mounting
►Design
RAILS & CARRIERS
Specifications
Z configuration
UV-VIS-IR OPTICS
Angle Bracket
XY Configuration
Z Configuration
XZ configuration
Accessories >>
BPTS-120
Model No:
Micrometer
Drive
TS120-Mu10-01
TS120-Mu10-02
TS120-Mu10-03
TS120-Mu10-04
TS120-Mu10-05
ABTS-120
ABZTS-120
APTS-120
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Feel free to talk to our
sales engineers
Call now !
+91 93875 84306
+91 93875 84332
Angle Bracket
with Base Plate
Adapter Plate
Configuration
Base Plate
E-mail :[email protected]
[email protected]
Base
Plate
Qty
Adapter
Plate
1
1
1
Qty
Angle
Bracket
Qty
Z Axis Angle
Bracket With
Base Plate
007
Qty
Micrometer
Length:L- 110 +/- 25
1
1
1
1
2
1
1
1
Travel Range : 50mm
Linear Resolution : 0.01mm/Div
Lead Screw Pitch : 0.5 mm
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
147
007
PHYSICS INSTRUMENTS
Base Plate
POSITIONING DEVICES
Rail carriers & Accessories
XZ Configuration
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
PRECISION TRANSLATION STAGE
TSV-35 Translation Stage
Travel: 5mm
Load Capacity :3kg vertical on X Axis
Drive: Option-1) Micrometer 10 μm Resolution
Option-2) Micrometer 5 μm Resolution
RAILS & CARRIERS
Specifications
OPTOMECHANICS
: ±2 μm
►Micrometer Linear Resolution : Option-(1) : 10 μm Option-(2) : 5 μm
►Guide way
: Precision V Grooved GuideWay
► Drive
: Micrometer
► Construction
: Aluminium Alloy B51S or stainless steel
►Finish
: Black anodized (aluminium )
Ground Finish for SS
: M3 and M4 Tapped Holes on Carriage
►Mounting Holes
: M3 CBR Hole for Mounting the Stage to
Base Plate or breadboard
: Post Mountable by Using M6 Thread
►Mounting Options
: Modular Design for Multi Axis Configurations
►Design
XY Configuration
XYZ Configuration
Accessories >>
Base Plate
XY configuration
BPTSV-35
Adapter Plate
APTSV-35
XYZ configuration
UV-VIS-IR OPTICS
Angle Bracket
ABTSV-35
with Base Plate
ABZTSV-35
Z Configuration
POSITIONING DEVICES
008
XZ Configuration
Configuration
X
XY
XYZ
Z
XZ
Model No:
Micrometer 5μm
Model No:
Micrometer 10μm
Configuration
TSV35-Mu10-01
TSV35-Mu10-02
TSV35-Mu10-03
TSV35-Mu10-04
TSV35-Mu10-05
Z configuration
sales engineers
Call now !
+91 93875 84306
+91 93875 84332
Material: Aluminium Alloy Make
TSV35-Mu05-01
TSV35-Mu05-02
TSV35-Mu05-03
TSV35-Mu05-04
TSV35-Mu05-05
Load Capacity (kg)
3
3
0.5
0.5
0.5
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
XZ configuration
[email protected]
PHYSICS INSTRUMENTS
Meterial: Stainless Steel 304 Make
SSTSV35-Mu05-01
SSTSV35-Mu05-02
SSTSV35-Mu05-03
SSTSV35-Mu05-04
SSTSV35-Mu05-05
SSTSV35-Mu10-01
SSTSV35-Mu10-02
SSTSV35-Mu10-03
SSTSV35-Mu10-04
SSTSV35-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
PAGE
148
008
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Precision Translation Stage
LTSV-35 Translation Stage : Side Drive
Travel: 5mm
RAILS & CARRIERS
Specifications
OPTOMECHANICS
: ±2 μm
►Micrometer Linear Resolution : Option-(1) : 10 μm
Option-(2) : 5 μm
►Guide way
► Drive
: Micrometer
► Construction
►Finish
: M3 and M4 Tapped Holes on Carriage
►Mounting Holes
►Mounting Options
►Design
XYZ Configuration
XY Configuration
XYZ configuration
Z Configuration
Load Capacity (kg)
3
3
0.5
0.5
0.5
Accessories >>
XZ Configuration
POSITIONING DEVICES
Configuration
X
XY
XYZ
Z
XZ
Z configuration
Base Plate
Model No:
Micrometer 5μm
Model No:
Micrometer 10μm
BPTSV-35
Configuration
LTSV35-Mu10-01
LTSV35-Mu10-02
LTSV35-Mu10-03
LTSV35-Mu10-04
LTSV35-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
SSLTSV35-Mu05-01
SSLTSV35-Mu05-02
SSLTSV35-Mu05-03
SSLTSV35-Mu05-04
SSLTSV35-Mu05-05
SSLTSV35-Mu10-01
SSLTSV35-Mu10-02
SSLTSV35-Mu10-03
SSLTSV35-Mu10-04
SSLTSV35-Mu10-05
Adapter Plate
APTSV-35
XZ configuration
Angle Bracket
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
ABTSV-35
with Base Plate
ABZTSV-35
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
009
PHYSICS INSTRUMENTS
LTSV35-Mu05-01
LTSV35-Mu05-02
LTSV35-Mu05-03
LTSV35-Mu05-04
LTSV35-Mu05-05
UV-VIS-IR OPTICS
XY configuration
149
009
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Travel: 10mm
RAILS & CARRIERS
Specifications
OPTOMECHANICS
: ±5 μm
Option-(2) : 5 μm
►Guide way
► Drive
: Micrometer
► Construction
►Finish
: M4 Tapped Holes on Carriage
►Mounting Holes
►Mounting Options
►Design
XY Configuration
XYZ Configuration
XY configuration
UV-VIS-IR OPTICS
XYZ configuration
Z Configuration
XZ Configuration
Accessories >>
Base Plate
BPTSV-50
Adapter Plate
POSITIONING DEVICES
010
APTSV-50
Model No:
Micrometer 5μm
Model No:
Micrometer 10μm
Configuration
Angle Bracket
ABTSV-50
TSV50-Mu05-01
TSV50-Mu05-02
TSV50-Mu05-03
TSV50-Mu05-04
TSV50-Mu05-05
TSV50-Mu10-01
TSV50-Mu10-02
TSV50-Mu10-03
TSV50-Mu10-04
TSV50-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
PHYSICS INSTRUMENTS
SSTSV50-Mu05-01
SSTSV50-Mu05-02
SSTSV50-Mu05-03
SSTSV50-Mu05-04
SSTSV50-Mu05-05
SSTSV50-Mu10-01
SSTSV50-Mu10-02
SSTSV50-Mu10-03
SSTSV50-Mu10-04
SSTSV50-Mu10-05
Z configuration
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
with Base Plate
ABZTSV-50
Configuration
X
XY
XYZ
Z
XZ
XZ configuration
Load Capacity (kg)
6
6
2
2
2
PAGE
150
010
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Travel: 5mm
Carriage Size : 50mm x 50mm
RAILS & CARRIERS
Specifications
OPTOMECHANICS
: ±5 μm
Option-(2) : 5 μm
►Guide way
► Drive
: Micrometer
► Construction
►Finish
: M4 Tapped Holes on Carriage
►Mounting Holes
: M4 CBR Hole for Mounting Stage to
►Mounting Options
►Design
XYZ Configuration
XYZ configuration
XY Configuration
Accessories >>
UV-VIS-IR OPTICS
XY configuration
Base Plate
Adapter Plate
Model No:
Micrometer 5μm
XZ Configuration
Model No:
Micrometer 10μm
Configuration
Angle Bracket
LTSV50-Mu05-01
LTSV50-Mu05-02
LTSV50-Mu05-03
LTSV50-Mu05-04
LTSV50-Mu05-05
LTSV50-Mu10-01
LTSV50-Mu10-02
LTSV50-Mu10-03
LTSV50-Mu10-04
LTSV50-Mu10-05
ABTSV-50
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
SSLTSV50-Mu05-01
SSLTSV50-Mu05-02
SSLTSV50-Mu05-03
SSLTSV50-Mu05-04
SSLTSV50-Mu05-05
SSLTSV50-Mu10-01
SSLTSV50-Mu10-02
SSLTSV50-Mu10-03
SSLTSV50-Mu10-04
SSLTSV50-Mu10-05
Z configuration
APTSV-50
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
with Base Plate
ABZTSV-50
Configuration
X
XY
XYZ
Z
XZ
XZ configuration
Load Capacity (kg)
6
6
2
2
2
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
011
PHYSICS INSTRUMENTS
Z Configuration
POSITIONING DEVICES
BPTSV-50
151
011
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Travel: 15mm
Drive: Option-1) Micrometer 1μm Resolution (Digital)
Option-2) Micrometer 10μm Resolution
RAILS & CARRIERS
Specifications
►Positioning Accuracy
Option-1) Micrometer Linear Resolution: 1 μm
: Precision V Grooved Guide Way
►Guide way
: Micrometer
► Drive
► Construction
: Black anodized (aluminium )and Ground Finish for SS
►Finish
: M6Tapped Holes on Carriage
►Mounting Holes
: M6 CBR Hole for Mounting Stage to Base Plate or breadboard
: Directly Mount to Breadboard by Using M6 Screws
►Mounting Options
►Design
XY configuration
OPTOMECHANICS
XYZ configuration
Accessories >>
Base Plate
BPTSV-65
Adapter Plate
APTSV-65
Z configuration
UV-VIS-IR OPTICS
POSITIONING DEVICES
012
XY Configuration
Angle Bracket
XYZ Configuration
ABTSV-65
with Base Plate
ABZTSV-65
Configuration
X
XY
XYZ
Z
XZ
Z Configuration
Model No:
Digital Micrometer 1μm
XZ configuration
Load Capacity (kg)
20
20
6
6
6
XZ Configuration
Model No:
Micrometer 10μm
Configuration
TSV65-DMu01-01
TSV65-DMu01-02
TSV65-DMu01-03
TSV65-DMu01-04
TSV65-DMu01-05
TSV65-Mu10-01
TSV65-Mu10-02
TSV65-Mu10-03
TSV65-Mu10-04
TSV65-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Digital Micro Meter
Length:L
PHYSICS INSTRUMENTS
SSTSV65-DMu01-01
SSTSV65-DMu01-02
SSTSV65-DMu01-03
SSTSV65-DMu01-04
SSTSV65-DMu01-05
SSTSV65-Mu10-01
SSTSV65-Mu10-02
SSTSV65-Mu10-03
SSTSV65-Mu10-04
SSTSV65-Mu10-05
Micrometer
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Length:L
PAGE
152
012
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
RAILS & CARRIERS
Travel: 15mm
Drive: Option-1) Micrometer 5μm Resolution
Specifications
Accessories >>
Base Plate
BPTSV-65
OPTOMECHANICS
►Straight line accuracy : ±2 μm for total travel length
►Guide way
► Drive
: Micrometer
► Construction
►Finish
: Black anodized (aluminium )& Ground Finish for SS
►Mounting Holes
: M6 CBR Hole for Mounting Stage to Base Plate
or breadboard
►Mounting Options : Directly Mount to Breadboard by Using M6 Screws
►Design
XY configuration
XY Configuration
XYZ Configuration
Angle Bracket
ABTSV-65
XYZ configuration
Z Configuration
Model No:
Micrometer 5μm
Configuration
X
XY
XYZ
Z
XZ
XZ Configuration
Model No:
Micrometer 10μm
Load Capacity (kg)
20
20
6
6
6
POSITIONING DEVICES
with Base Plate
ABZTSV-65
Z configuration
Configuration
LTSV65-Mu10-01
LTSV65-Mu10-02
LTSV65-Mu10-03
LTSV65-Mu10-04
LTSV65-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
SSLTSV65-Mu05-01
SSLTSV65-Mu05-02
SSLTSV65-Mu05-03
SSLTSV65-Mu05-04
SSLTSV65-Mu05-05
SSLTSV65-Mu10-01
SSLTSV65-Mu10-02
SSLTSV65-Mu10-03
SSLTSV65-Mu10-04
SSLTSV65-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
XZ configuration
sales engineers
Call now !
+91 93875 84306
+91 93875 84332
[email protected]
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
013
PHYSICS INSTRUMENTS
LTSV65-Mu05-01
LTSV65-Mu05-02
LTSV65-Mu05-03
LTSV65-Mu05-04
LTSV65-Mu05-05
UV-VIS-IR OPTICS
Adapter Plate
APTSV-65
153
013
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Travel: 25mm
Drive: Option-1) Micrometer 1μm Resolution (Digital)
RAILS & CARRIERS
Specifications
OPTOMECHANICS
►Straight line accuracy : ±3.5 μm for total travel length
►Guide way
► Drive
: Micrometer
► Construction
►Finish
►Mounting Holes
or breadboard
►Design
XY configuration
XYZ configuration
Accessories >>
XY Configuration
Base Plate
XYZ Configuration
BPTSV-90
Adapter Plate
APTSV-90
Z configuration
UV-VIS-IR OPTICS
Angle Bracket
POSITIONING DEVICES
014
ABTSV-90
Z Configuration
with Base Plate
XZ Configuration
ABZTSV-90
Configuration
X
XY
XYZ
Z
XZ
Model No:
Digital Micrometer 1μm
Model No:
Micrometer 10μm
XZ configuration
Load Capacity (kg)
22
22
6
6
6
Configuration
TSV90-DMu01-01
TSV90-DMu01-02
TSV90-DMu01-03
TSV90-DMu01-04
TSV90-DMu01-05
TSV90-Mu10-01
TSV90-Mu10-02
TSV90-Mu10-03
TSV90-Mu10-04
TSV90-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Digital Micro Meter
Length:L
PHYSICS INSTRUMENTS
SSTSV90-DMu01-01
SSTSV90-DMu01-02
SSTSV90-DMu01-03
SSTSV90-DMu01-04
SSTSV90-DMu01-05
SSTSV90-Mu10-01
SSTSV90-Mu10-02
SSTSV90-Mu10-03
SSTSV90-Mu10-04
SSTSV90-Mu10-05
Micrometer
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Length:L
PAGE
154
014
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Travel: 25mm
Drive: Option-1) Micrometer 5μm Resolution
RAILS & CARRIERS
Specifications
XY Configuration
OPTOMECHANICS
►Straight line accuracy : ±3.5 μm for total travel length
►Guide way
► Drive
: Micrometer
► Construction
►Finish
►Mounting Holes
or breadboard
►Design
XYZ Configuration
Accessories >>
XY configuration
Base Plate
Adapter Plate
XYZ configuration
APTSV-90
Z Configuration
XZ Configuration
UV-VIS-IR OPTICS
BPTSV-90
Angle Bracket
ABTSV-90
with Base Plate
ABZTSV-90
Model No:
Micrometer 10μm
Configuration
LTSV90-Mu05-01
LTSV90-Mu05-02
LTSV90-Mu05-03
LTSV90-Mu05-04
LTSV90-Mu05-05
LTSV90-Mu10-01
LTSV90-Mu10-02
LTSV90-Mu10-03
LTSV90-Mu10-04
LTSV90-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
SSLTSV90-Mu05-01
SSLTSV90-Mu05-02
SSLTSV90-Mu05-03
SSLTSV90-Mu05-04
SSLTSV90-Mu05-05
SSLTSV90-Mu10-01
SSLTSV90-Mu10-02
SSLTSV90-Mu10-03
SSLTSV90-Mu10-04
SSLTSV90-Mu10-05
X Axis
XY Axis
XYZ Axis
Z Axis
XZ Axis
Configuration
X
XY
XYZ
Z
XZ
Load
Capacity (kg)
22
22
6
6
6
XZ configuration
sales engineers
Call now !
+91 93875 84306
+91 93875 84332
[email protected]
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
015
PHYSICS INSTRUMENTS
Model No:
Micrometer 5μm
POSITIONING DEVICES
Z configuration
155
015
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Vertical Translation Stages
- [VTS series]
RAILS & CARRIERS
Vertical movement is obtained by activating a spring-loaded cam by micrometer head.
Rolling contact guide ways using crossed rollers are employed for friction and stick-slip
free translation. These guide ways are factory preloaded to eliminate play and wobble.
There are tapped holes at the top and clearance slots at the base for mounting
purpose.The stage is constructed of aluminium alloy and finished by black anodizing or
in stainless steel with ground finish.
Holmarc manufactures vertical stages in three models for 25 mm, 10 mm and 5 mm travel
Specifications
►Guide way
► Drive
► Construction
►Finish
►Mounting Holes
OPTOMECHANICS
►Mounting Options
►Design
: ±10 μm
:10 Micrometer
: Precision Ball Slide
: Precision Lead screw /Micrometer
: Aluminium Alloy B51S
: M4/ M6 Tapped Holes on Carriage
: M4/ M6 CBR Hole for Mount the Stage
to Base Plate or breadboard
: Post Mountable by Using M6 Thread (VTS5 Only)
: Directly Mount to Breadboard by Using M6 Screws
: Modular Type Design for Multi Axis Configurations
VTS-5-Mu10
VTS-5-Mu10
VTS-10-Mu10
VTS-10-Mu10
VTS-10-90-Mu10
VTS-10-90-Mu10
VTS-25-Mu10
VTS-25-Mu10
VTS-25-90-Mu10
VTS-25-90-Mu10
UV-VIS-IR OPTICS
POSITIONING DEVICES
VTS-5-Mu10
VTS-5-Mu10
VTS-10-Mu10
VTS-10-Mu10
VTS-10-90-Mu10
VTS-10-90-Mu10
VTS-25-Mu10
VTS-25-Mu10
VTS-25-90-Mu10
VTS-25-90-Mu10
016
PHYSICS INSTRUMENTS
PAGE
156
016
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
VTS-5-Mu10
VTS-10-Mu10
VTS-10-90-Mu10
VTS-25-Mu10
RAILS & CARRIERS
VTS-25-90-Mu10
Model No:
Drive : Digital Micrometer
LC : 0.01mm
Travel
Load Capacity
Plotform size
VTS-5-Mu10
VTS-10-Mu10
VTS-10-90-Mu10
VTS-25-Mu10
VTS-25-90-Mu10
VTS-10-Dmu
VTS-10-90-Dmu
VTS-25-Dmu
VTS-25-90-Dmu
5
10
10
25
25
2 kg
5 kg
5 kg
6 kg
6 kg
50 x 50
65 x 65
90 x 90
65 x 65
90 x 90
sales engineers
Call now !
+91 93875 84306
+91 93875 84332
[email protected]
OPTOMECHANICS
Model No:
Drive : Micrometer
LC : 0.01mm
TM
HOLMARC
LINEAR MOTION SLIDES
UV-VIS-IR OPTICS
Linear motion Slides are ready to fit and cost-effective bearing assemblies for achieving straight-line movements
in a mechanism. Essentially, the linear motion slide consists of two parts, a fixed base and a moving carriage.
Rolling elements, balls or rollers provide the interface between base and carriage and perfectly rolls on four
surfaces arranged at 90 degree, called guide ways. In the case of slides from holmarc, hardened and ground
rods act as guide ways. Wear and tear is negligible even after long use as there is a perfect rolling contact
between rolling elements and guide ways. Friction is very less and in most cases, co-efficient of friction is less
than 0.002. The slides can support heavy loads without compromising performance accuracies. Factory preloading of the slides during assembly practically eliminate play and wobble.
The use of these readily available slide units saves time during design as well as for manufacturing. Compared
to other options for linear motion, slide assemblies are cost effective, maintenance free and durable.
Linear slides find a variety of applications in the following areas,
Industrial automation
Robotics
Metrology and measuring equipments
Medical equipments
Product packing
Textile industries
Electronic manufacturing
Machine tool equipments
Manufacturing processes like
welding, drilling, wood industries etc:
POSITIONING DEVICES
1)
2)
3)
4)
5)
6)
7)
8)
9)
017
PHYSICS INSTRUMENTS
Holmarc offers wide range of linear slides assemblies to
choose from. There are four major categories namely,
Miniature ball slides, Spring loaded slides, Ball slides and
Roller slides. Dozens of models depending upon footprint
and travel range are available in each category.
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
157
017
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Multi axes Translation Stages
XYZ Compact Translation Stage
Model : XYZCTS50
This stage is designed and constructed to be compact and to be suitable for space restricted applications. Unlike our TS series modular stages, these
stages are factory assembled as a three axes positioner. Micrometers or lead screws can be used for driving the stage.
RAILS & CARRIERS
All the driving adjustment lead screws/micrometers are fixed on one side for ergonomical positioning control.M6 tapped holes are provided on top
and bottom for mounting purpose. A base plate need to be used for mounting on to breadboards and optical tables.
► Single side control
► 10mm travel for X axis
► 5mm travel for YZ axis
► 50x50mm top size
► 50mm minimum height
► 1kg load capacity
► Straight line accuracy : 0.010mm
► Precision micrometer driven
► M6/M4 mounting holes
► Post/ base mountable
OPTOMECHANICS
XYZ Compact Translation Stage Model : XYZCTS65
UV-VIS-IR OPTICS
► 15mm travel for XY axis
► 6mm travel for Z axis
► Straight line accuracy: 0.010mm
► M6 mounting holes
► Base mountable
POSITIONING DEVICES
XYZ Compact Translation Stage Model : XYZCTS90
► 25mm travel for X axis
► 10mm travel for YZ axis
► Straight line accuracy: 0.010mm
► Base mountable
018
PHYSICS INSTRUMENTS
PAGE
158
018
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
Three axes compact stages from holmarc are factory assembled in
X,Y and Z directions to keep the footprint as minimum as possible.
All the three axes have pre-loaded rolling contact guides for play less
and friction free movement. Drive is by 80 tpi leadscrew. Top surface
of the stage has M6 tapped holes for component mounting or
assembly. A base plate with M6 counter bored slot is fixed to the
bottom for convenient fixing of this stage to breadboards and tables.
Model : XYZCTS 35-35
► XYZ,Linear Travel- 10 & 15mm
► Drive : Leadscrew
► Resolution: 0.1mm
► Load Capacity: 2kg
► Straight Line Accuracy : 0.01mm
► M6/M3 Mounting Holes
Model : XYZCTS 60-60
XYZ,Linear Travel- 10mm
OPTOMECHANICS
XYZ,Linear Travel-15mm
Model No:
XYZCTS 35-35
XYZCTS 60-60
XYZ Positioner
RAILS & CARRIERS
TABLE OF CONTENTS
RESEARCH TOOLS
Drive
Lead Screw
Lead Screw
Travel
10mm
15mm
POSITIONING DEVICES
UV-VIS-IR OPTICS
► 76mm height
► X Travel 5mm
► Y Travel 5mm
► Z Travel 5mm
► Aluminium Alloy
► Black anodized finish
019
XYZ Positioner Left Side Drive
Model No:
CTS-3AR-Mμ10
CTS-3AL-Mμ10
Drive
Micrometer 10µ
Micrometer 10µ
Orientation
Right
Left
Travel
5mm
5mm
XYZ Positioner Right Side Drive
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
159
019
PHYSICS INSTRUMENTS
XYZ Positioner
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
4 Axis Stages
Model : XYZ4A
RAILS & CARRIERS
Four axes stages from holmarc are best suited for positioning lasers or optical
imaging devices like CCD cameras. The stage has two linear movements ( Y,
Z) and two tilt adjustments ( theta, phi). All four axes are driven by standard
micrometer heads. X and Z axes have rolling contact guides with crossed
rollers for frictionless precise positioning. 'Phi' axis is a spring loaded
kinematic one where as 'theta' axis uses preloaded rotary bearings for stable
positioning. Construction material is aluminium alloy and finish is black
anodized.
HOLMARC positioning
stages are available in
custom specifications as
well. Please contact us
with your specifications.
► XZ,Linear Travel-10mm
► Theta, phi travel : +/-2.5 degree
: Micrometer
► Drive
► Z axis Drive : Leadscrew
► Resolution : 10microns
► Straight Line Accuracy : 0.01mm
► Load Capacity: 10kg
► M6 Mounting Holes
OPTOMECHANICS
Five Axis Positioner
► 76mm height
► X Travel 5mm
► Y Travel 5mm
► Z Travel 5mm
UV-VIS-IR OPTICS
Model No:
CTS-5AR-Mμ10
CTS-5AL-Mμ10
► Aluminium Alloy
► ø1Tilting Range ± 2°
► ø2Tilting Range ± 2°
Drive
Micrometer 10µ
Micrometer 10µ
Orientation
Right
Left
Travel
5mm
5mm
POSITIONING DEVICES
020
PHYSICS INSTRUMENTS
Five Axis Positioner Left Side
Five Axis Positioner Right Side
PAGE
160
020
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
XYZ Heavy Duty Translation Stages
RAILS & CARRIERS
These translation stages are designed for positioning
heavy loads in X, Y and Z directions precisely without play
and wobble. Preloaded roller bearing guides are used for
all the three axes for friction free and play less movement.
Even with heavy loads, movements are smooth and
effortless. Worm gear drive is used in Z axis where as lead
screw drive is used for X and Y axes. Top surface of the
stage is provided with M6 tapped holes at 25 mm grid.
Linear scale with vernier is provided for measured and
repeatable positioning. The stage is constructed in
aluminium alloy and given a black anodized finish. These
stages can be made available in various sizes, travel
ranges, heights and load capacity.
XYZ TS-250200
Model No:
XYZTS-200200-3
XYZTS-250200-3
Travel
X-100, Y-100, Z 100
X-100, Y-100, Z 100
Size(LXBXH)
200x200x200mm
250x200x240mm
XYZ TS-200200
UV-VIS-IR OPTICS
► Construction Material : Aluminum Alloy B51S
► Finish : Black Anodized (Aluminium)
: M6 CLR Slot for Mount the Stage to breadboard
POSITIONING DEVICES
► Travel : 100mm XYZ Axis
► Load Capacity :50kg
► Drive : Lead screw
► Straight Line Accuracy : 10 microns
► Linear ResolutionXY Axis :1mm/ Rotation
► Z Axis : 0.8mm/Rotation
► Read Out : 0.1mm (Venire Scale)
► Guide way : Precision Ball Bearing Guide Way
OPTOMECHANICS
Holmarc manufactures translation stages for heavy duty
applications. Products described in this section can be
used to position objects as heavy as 50 kgs with ease.
Worm gear mechanism is used for Z axis for handling
heavy lifting loads. X and Y axes have leadscrew drives
with engaged nuts. Linear scales are attached to the side
of the stages for taking measurements.These series are
available in custom sizes and specification as per
request.
PHYSICS INSTRUMENTS
021
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
161
021
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
XY MOVING PLATFORM
XYTSM Series
RAILS & CARRIERS
These are factory assembled XY stages for general purpose positioning applications. The
stages employ rolling contact linear guide ways using crossed rollers. Friction, stick-slip
and play are absent for all practical designs. They are available with lead screw drives as
well as micrometer drives. Carriage (moving top) remains spring loaded by a tension
spring against the micrometer spindle. This feature eliminates back-lash. In standard
models, construction material used is aluminium alloy. We manufacture these products in
mild steel and stainless steel as well.
► Micrometer drive
► Base mountable
>> Applications
► Hardness testing
► Measuring microscope
OPTOMECHANICS
Motion Control Systems
Since 1994, HOLMARC has designed
and manufactured hundreds of motion
control and positioning systems for our
customers. We are a leading supplier
of motion control products to industry
and research institutions around the
world.
UV-VIS-IR OPTICS
Our precision motion control products
provide critical performance required
for today’s demanding applications in
markets such as life science,
photonics, laser processing, nano
technology and others.
POSITIONING DEVICES
Our product line in motion control
includes automated high-speed
gantries, linear stages, rotary stages,
tilt stages, single and multi-axis motion
controllers, goniometers, gimbal
mounts, etc. This wide range of
products makes us unique among
motion control manufacturers.
022
PHYSICS INSTRUMENTS
Model No:
XYTSM-25-Mu-10
XYTSM-50-Mu-10
XYTSM25-DMu
Drive
Micrometer
Micrometer
Digital
Micrometer
Resolution
0.01 mm
0.01mm
0.01mm
Travel
25 mm
50 mm
25 mm
Load Capacity
25 kg
30 kg
25 kg
MRS Series
Stainless Steel
Motorized Rotation Stage
Refer page: 132
PAGE
162
022
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
These stages have through holes at the center with a step on the top of the stage for
placing a transparent glass disc if required.Optical instruments like profile
projectors, microscopes, etc. require illumination from underneath the sample.
Stages under this series are suitable for such applications. The center hole can also
act as an access hole for fixing components like gauges, sensors etc. to the fixed
base.
► Micrometer drive
► Straight line
accuracy: 0.010mm
► Base mountable
All other features remain same as that of our standard
stages. Precision crossed roller based rolling contact
guides are used for achieving perfect linear motion.
Co-efficient of friction is maintained below 0.002. Play
and wobble are eliminated for all practical purpose.
The stage is constructed out of aluminium alloy and
finished by black anodizing.
>> Applications
► Profile projector
► Tool makers microscope
► Compound microscope
► Pathology microscope
Carriage Size
120x120
150x150
Travel
25
50
UV-VIS-IR OPTICS
Custom hole pattern can
be provided on platform
Model No:
XYTSWM25
XYTSWM50
OPTOMECHANICS
RAILS & CARRIERS
TABLE OF CONTENTS
RESEARCH TOOLS
POSITIONING DEVICES
Holmarc manufactures these stages
with custom specifications. In many
cases, we manufacture stages with
rectangular or square access holes at
the center instead of circular holes.
Various drive options as well as sizes are
also available. Contact us @
[email protected]
[email protected]
Glass Plate for XYTSWM series
Drive
Micrometer
Micrometer
Digital
Micrometer
Resolution
0.01 mm
0.01mm
0.01mm
Travel
25 mm
50 mm
25 mm
Load Capacity
25 kg
30 kg
25 kg
Glass plates are available for XYTSWM series XY translation
stages
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
023
PHYSICS INSTRUMENTS
Model No:
XYTSWM-25-Mu-10
XYTSWM-50-Mu-10
XYTSWM-25-DM
163
023
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
HEAVY DUTY XY MOVING PLATFORM
XYTSWM Series XY Heavy Duty Moving Platform
RAILS & CARRIERS
These are heavy duty XY stages capable of supporting comparitively heavy
loads. These stages find applications for positioning instruments like
microscopes in XY plane. Standard stages have slots for M6 screws on the
base for mounting to supporting platform. The drive can be either by lead
screw or micrometer. Crossed roller based linear guides are used for
achieving precision linear motion.
Custom hole pattern can
be provided on platform
The guide ways are factory preloaded to eliminate play and wobble.
Coefficient of friction is less than 0.003. Standard stages are constructed in
aluminium alloy and finished by black anodizing.
OPTOMECHANICS
Precision V grooved
design provides smooth
and accurate positioning
Stainless steel stages exhibit lower
thermal expansion and better long-term
stability compared to aluminium stages.
► Precision V grooved guide ways
with crossed rollers
► Built with mounting holes
► 0.004mm straight line accuracy
► Micrometer drive, LC 10 micrometer
► Aluminum Alloy B51S
► Black Anodized
UV-VIS-IR OPTICS
POSITIONING DEVICES
024
XYTSWM-150
XYTSWM-200
XYTSWM-250
PHYSICS INSTRUMENTS
Model
Travel
Carriage Size
Height
XYTSWM-150
XYTSWM-200
XYTSWM-250
SS XYTSWM-150
SS XYTSWM-200
SS XYTSWM-250
25mm
25mm
50mm
25mm
25mm
50mm
150mm x 150mm
200mmx 200mm
250mmx250mm
150mm x 150mm
200mmx 200mm
250mmx250mm
48mm
56mm
64mm
48mm
56mm
64mm
Load Capacity
(Vertical)Kg
25 kg
35
50
35 kg
45
65
Construction Material
Aluminium Alloy
Aluminium Alloy
Aluminium Alloy
Stainless Steel
Stainless Steel
Stainless Steel
PAGE
164
024
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
XYTS Series XY Moving Platform
>> Applications
► XY moving platforms
► Inspection microscopes
► Induction hardening
For motorized model
Refer page: 105
XYTS Series stages help to position heavy
object up to 25kg. These stages are ideal
choice for microscope probe station
interfacing.
Platforms are available upto to 500x500mm
size. Custom mounting hole patterns are
available for easy integration with other system
components.
UV-VIS-IR OPTICS
► Precision leadscrew
► Base mountable
OPTOMECHANICS
RAILS & CARRIERS
These are heavy duty XY positioning stages driven by lead screw-nut mechanism fixed
by the side of the stage. The side drive design reduces overall footprint of the stage,
especially, total length. There are side locks for both X and Y stages to keep the stage
rigid after positioning. Top and bottom surfaces of the stage have M6 mounting holes at
50 mm grid. Crossed roller based linear guides are used for achieving precision linear
motion. The guide ways are factory preloaded to eliminate play and wobble. Coefficient
of friction is less than 0.003. Standard stages are constructed in aluminium alloy and
POSITIONING DEVICES
ROTATIONAL MOTION FOR
XYTS SERIES MOVING PLATFORM
Model No:
XYTS150150
XYTS170170
XYTS270170
XYTS270240
XYTS370240
Carriage Size
150x150
170x170
270x170
270x240
370x240
Travel
50,50
100,100
200,100
200,170
300,170
Height (mm)
65
65
75
75
75
L(mm)
150
170
270
270
370
W(mm)
150
170
170
240
240
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
165
025
PHYSICS INSTRUMENTS
025
This rotation stage can be used with XYTS series
XY moving platform. The stage has C’ bored
holes around the corner and can easily be
attached to the XY stage using M6 screws. An
angular scale along the outer edge of the
mounting surface allows the user to set the
angular orientation of the stage, which can then
be fixed using a locking setscrew.
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
XYTSW Series XY moving Stage
RAILS & CARRIERS
These stages have rectangular through holes at the center, primarily meant
for back illumination. The top surface has stepped under cut on the
periphery of the central hole for keeping a glass plate of suitable size. Lead
screw-nut mechanism provides the linear drive, fixed by the side of the
stage. These stages are best suited for measuring instruments like profile
projectors and custom microscopes.
Crossed roller based linear guides are used for achieving precision linear
motion. The guide ways are factory preloaded to eliminate play and
wobble. Coefficient of friction is less than 0.003. Standard stages are
constructed in aluminium alloy and finished by black anodizing.
OPTOMECHANICS
► Precision ground lead screw /
ball screw
► Quick movement
Model No:
XYTSW175175
XYTSW225225
XYTSW325325
XYTSW325295
XYTSW425295
For motorized model
Refer page: xxx
>> Applications
► Inspection microscope
► Dispensing
Carriage Size Aparture Size
175 x 175
75 x 75
225 x 225
125 x 125
325 x 225
225 x 125
325 x 295
225 x 195
425 x 295
325 x 195
Travel
50,50
100,100
200,100
200,170
300,170
H
65
65
75
75
75
L
175
225
325
325
425
W
175
225
225
225
425
L1
75
125
225
195
195
W1
75
125
125
175
175
Glass plates are available for
XYTSW series XY translation stages
Glass Plate
Model
Gl7575
Gl125125
Gl225125
Gl225195
Gl325195
Size
Compatible Stage
95 x 95
145 x 145
245 x 145
245 x 215
345 x 215
XYTSW175175
XYTSW225225
XYTSW325225
XYTSW325295
XYTSW425295
UV-VIS-IR OPTICS
POSITIONING DEVICES
026
PHYSICS INSTRUMENTS
XYTSW Series manual stages can be used with profile projector,
microscope etc. For automated application please see the MXYTSW
Series stages.
Linear encoder is available on special request for digital readout
application. Please ask for quotation. Contact us at
Make your Choice !!!
Platforms are available up to 500x500mm size,
Materials other than aluminium are
also available on request.
[email protected], [email protected]
PAGE
166
026
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
MANUAL TRANSLATION STAGES-FEED SCREW TYPE
Translation Stage With Coarse Movement
: 0.1mm
: Precision ball slide
: Precision lead screw
: Black anodized
: M6 tapped holes
: M6 Tap and M4 CBR
: Modular type
Angle Bracket :
Angle bracket can be used for assembling Z-axis
stages. Horizontally fixed height platforms can be
constructed by combining two angle brackets.
Base plates :
Base plates can be used for mounting
translation stages to breadboards and
tables conveniently.
UV-VIS-IR OPTICS
OPTOMECHANICS
Straight line accuracy
Vernier Readout
Guide way
Drive
Construction
Finish
Tapped Holes on Carrriage
Mounting Holes on the base
Design
RAILS & CARRIERS
Travel: 30 to 90 mm
Carriage width : 50mm
Load Capacity :6kg vertical
Leadscrew: 1mm pitch/9mm pitch
Drive Details
TSC-1-5050
TSC-1-5075
1 mm Pitch lead screw
Pitch : 1 mm
Lead Screw Type : Ground
Linear Resolution : 1mm/rotation
Readout
: 0.1mm precision venier
Feature
: Fine controlled motion with
1mm pitch lead screw
TSC-1-5090
POSITIONING DEVICES
TSC-1-5030
9 mm Pitch lead screw
Pitch : 9 mm
Lead Screw Type : Ground
Linear Resolution :9mm/rotation
Readout
: 0.1mm precision venier
Feature
027
Model No.
Model No.
Speed/ Positioning
Rotation Accuracy
1 mm
0.02mm
1mm
0.02mm
1mm
0.02mm
1mm
0.02mm
Travel
range
30 mm
50 mm
75 mm
90 mm
9 mm Pitch
Lead Screw
TSC-9-5030
TSC-9-5050
TSC-9-5075
TSC-9-5090
Speed/
Rotation
9mm
9mm
9mm
9mm
Positioning
Accuracy
0.5mm
0.5mm
0.5mm
0.5mm
Travel
range
30 mm
50 mm
75 mm
90 mm
Accessories
Horizontal Bracket
Vertical Bracket
HAB-TSC-5050
VAB-TSC5030
VAB-TSC5050
Platform Size:
VAB-TSC5075
50x50mm
VAB-TSC5090 With m6 tapped holes
Base Plate
BP-TSC5030
BP-TSC5050
BP-TSC5075
BP-TSC5090
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
167
027
PHYSICS INSTRUMENTS
1 mm Pitch
Lead Screw
TSC-1-5030
TSC-1-5050
TSC-1-5075
TSC-1-5090
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
MLS Series Translation Stages
RAILS & CARRIERS
Travel: 25 to 150 mm
Carriage width : 65mm to 200mm
Load Capacity :5-35kg vertical
Lock : Can be locked at desired position
OPTOMECHANICS
Venier Readout
Guide way
Drive
Construction
Finish
Tapped Holes on Carriage
Design
Configuration
Drive Details
: 0.1mm
: Precision ball slide
: Black anodized
: M6 tapped holes
: M6 tap and M4 CBR
: Modular type
: Multi axis
UV-VIS-IR OPTICS
1mm Pitch Lead screw
Pitch
: 1mm
Lead screw Type : Ground
Positioning Accuracy :10 μm
Repeatability
: 10 μm
Readout
: 0.1mm Vernier
Feature
Pitch
: 9mm
Lead screw Type : Ground
Positioning Accuracy :100 μm
Repeatability
: 200 μm
Readout
: 0.1mm vernier
Feature
: Coarse motion with
POSITIONING DEVICES
1 mm Pitch
Lead Screw
Load Capacity
Vertical(X Axis)
9mm Pitch
Lead Screw
Load Capacity
Vertical(X Axis)
Travel
Model No:
Kg
Model No:
Kg
T
W
L
T/2
X
MLS-6565-1
MLS-7575-1
MLS-75100-1
MLS-75150-1
MLS-75200-1
MLS-100100-1
MLS-100150-1
MLS-100200-1
MLS-150150-1
MLS-150200-1
MLS-200200-1
6
8
15
25
28
20
25
28
25
35
35
MLS-6565-9
MLS-7575-9
MLS-75100-9
MLS-75150-9
MLS-75200-9
MLS-100100-9
MLS-100150-9
MLS-100200-9
MLS-150150-9
MLS-150200-9
MLS-200200-9
6
7
12
22
24
15
20
24
22
30
30
25
35
50
100
150
50
100
150
100
150
150
65
75
75
75
75
100
100
100
150
150
200
65
75
100
150
200
100
150
200
150
200
200
12.5
17.5
25
50
75
25
50
75
50
75
75
M4
M4
M4
M4
M4
M6
M6
M6
M6
M6
M6
Dimensions
028
PHYSICS INSTRUMENTS
Angle Bracket :
Angle bracket can be used for assembling Zaxis stages. Horizontally fixed height
platforms can be constructed by combining
two angle brackets.
Base plates :
Base plates can be used for
mounting translation stages to
breadboards and tables
conveniently.
PAGE
168
028
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Custom design and manufacturing of linear stages is regular activity being
carried out at Holmarc. Stages are designed for multitudes of applications
in research and manufacturing. The standard stages described in the
preceding pages of this brochure are in fact the result of years of experience
in customization of linear positioning for our esteemed clients. Sourcing
mechanics, electronics and software from a single source reduces hassles
of integration. Our engineers at Holmarc will be happy to configure
innovative as well as traditional design to suit your specific application.
RAILS & CARRIERS
We know some applications
require uniquely engineered solutions...
CUSTOM
CUSTOM ENGINEERED POSITIONING SYSTEMS
Fig. 1000mmX750mm
Motorized XY stage
OPTOMECHANICS
>> XY Motorized
Target Holder
Holmarc has standardized an array of positioning stages. These include
linear slides having traverse from 5 mm to 500 mm, micrometer and lead
screw driven stages and motorized stages in modular as well as standalone
configurations. Applications are as diverse as well.
In many cases, customization of our standard stages is done at resonable
cost. All our esteemed customers are welcome to discuss application
needs and unique requirements with our engineers
>> 4Axis
HeNe Laser
Positioner
HOLMARC
OPTO-MECHATRONICS PVT. LTD
OFFICE & FACTORY ADDRESS
Specifications >>
B.7, H.M.T. INDUSTRIAL ESTATE,
H.M.T. P.O, KALAMASSERY,
KOCHI, KERALA,INDIA
Ph.No. 91-484 2540075
UV-VIS-IR OPTICS
<< XYZ Motorized
Linear Translation
Stage
d)
e)
f)
g)
h)
I)
[email protected]
Website: www.holmarc.com
j)
POSITIONING DEVICES
Manual Translation Stage
Travel: 1250mm
Stroke length: 1250mm
Resolution: 0.05mm
Linear accuracy: 0.015mm
Repeatability: 0.002mm
Linear motion guide-ways: preloaded,
rolling contact ways using rollers and
precision V-groove guide-ways.
hardened and precision ground.
Drive: Rolled ball screw
029
PHYSICS INSTRUMENTS
Carriage:
Size: 200mm x 150mm, with M6 tapped @ 25mm
matrix, with proper inserts.
Load carrying capacity: 35kg.
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
169
029
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
LTTS series manual translation stages provide maximum travel with minimum overall
footprint. Re-circulating type ball bearing guide ways are used in all models. Drive is
given by either ball screws or lead screws fixed by the side of the stage. Width of the
RAILS & CARRIERS
Travel can range from 50 mm to 500 mm. Tapped holes are provided on top
and counter bored holes are provided on base for mounting purpose. For all
the standard products, construction is in aluminium alloy. Circular
graduations are there on driving knob. There are linear graduations by the
side of the stage.
Knob With Lock
Z Axis Stage
Horizontal Bracket
OPTOMECHANICS
Vernier Scale
Vertical Angle
Bracket
Y Axis
UV-VIS-IR OPTICS
X Axis
Base Plate
Accessories >>>
◄
POSITIONING DEVICES
Knob With Lock
Base plates :
Base plates can be used for mounting translation
stages to breadboards and tables conveniently.
030
PHYSICS INSTRUMENTS
◄ Angle Brackets :
It is used to transform horizontal translators into
vertical ones. Horizontally fixed height platforms
can be constructed by combining two angle
brackets.
Accessories Sold Separately
PAGE
170
030
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
LTTS50 Series
RAILS & CARRIERS
Travel : 50 to 150 mm
Carriage Size : 50mm X 50mm
Leadscrew : 1mm pitch/9mm pitch
Engraved vernier
scales are provided
with all LTTS series
translation stages.
: ±5 μm over 25mm travel
: 0.1mm
: Precision recirculating
Guide way
Drive
Construction
Finish
: Black anodized
Tapped holes on carriage
: M4 tapped holes
Mounting holes on the base : M6 tap and M4 CBR
Design
: Modular type
Configuration
: Multi Axis Configuration
Pitch
: 1mm
Lead screw type : Ground
Linear resolution : 1mm/rotation
Positioning accuracy :10 μm
Readout
: 0.1mm precision vernier
Feature
Pitch
: 9mm
Readout
Feature
: Coarse movement with
1mm Pitch
Lead screw
Model No.
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
9mm Pitch
Lead screw
Model No.
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
LTTS50-50
LTTS50-75
LTTS50-100
LTTS50-150
2
2
2
2
1
1
1
1
LTTS50-50Z
LTTS50-75Z
LTTS50-100Z
LTTS50-150Z
2
2
2
2
1
1
1
1
UV-VIS-IR OPTICS
Travel
Length
T
L
50
75
100
150
155
180
205
280
POSITIONING DEVICES
Drive Details
OPTOMECHANICS
Vernier readout
Guide way
VAB-LTTS50-50
VAB-LTTS50-75
VAB-LTTS50-100
VAB-LTTS50-150
Accessories
Horizontal Bracket
Base Plate
BP-LTTS50-50
BP-LTTS50-75
BP-LTTS50-100
BP-LTTS50-150
HAB-LTTS-50
Size : 50x50mm
It is used to transform horizontal
translators into vertical ones.
Horizontally fixed height platforms
can be constructed by combining two
angle brackets.
Base plates :
mounting translation stages
to breadboards and tables
conveniently.
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
171
031
PHYSICS INSTRUMENTS
Vertical Bracket
◄
031
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
LTTS-75 Series
Load Capacity :5kg vertical on X axis
Lead Screw: 1mm pitch/9mm pitch
RAILS & CARRIERS
Engraved vernier
scales are provided
translation stages.
OPTOMECHANICS
Venier Readout
Guide way
: 0.1mm
Guide way
Drive
Construction
Finish
: Black anodized
: M4 tapped holes
Design
: Modular type
Configuration
: Multi axis
UV-VIS-IR OPTICS
Drive Details
Pitch
: 1mm
Readout
Feature
Pitch
: 9mm
Readout
Feature
: Coarse movement with
POSITIONING DEVICES
1mm Pitch Load Capacity Load Capacity
Lead screw Vertical(X Axis) Vertical(Z Axis)
Kg
Kg
Model No.
LTTS75-50
LTTS75-75
LTTS75-100
LTTS75-150
LTTS75-250
2
2
2
2
2
1
1
1
1
1
9mm Pitch
Lead screw
Model No.
Load Capacity Load Capacity
Travel
Vertical(X Axis) Vertical(Z Axis)
T
Kg
Kg
LTTS75-50Z
LTTS75-75Z
LTTS75-100Z
LTTS75-150Z
LTTS75-250Z
1
1
1
1
1
2
2
2
2
2
50
75
100
150
250
Length
Accessories
L
155
205
280
280
280
Vertical Bracket
Horizontal Bracket
Base Plate
Vertical Bracket
PHYSICS INSTRUMENTS
VAB-LTTS75-50
VAB-LTTS75-100
VAB-LTTS75-150
VAB-LTTS75-200
VAB-LTTS75-250
Accessories
Horizontal Bracket
HAB-LTTS-75
Size : 75x75mm
Base Plate
BP-LTTS75-50
BP-LTTS75-100
BP-LTTS75-150
BP-LTTS75-200
BP-LTTS75-250
translators into to vertical ones.
Horizontalyl fixed height platforms
angle brackets.
◄
032
Base plates :
conveniently.
PAGE
172
032
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
LTTS-125 Series
RAILS & CARRIERS
Load Capacity :45-50kg vertical on X axis
Ball Screw: 4mm pitch ball screw
: 0.1mm
Guide way
Drive
: Precision Ball screw
Construction
: Aluminum alloy B51S
Finish
: Black anodized
Tapped Holes on Carriage : M6 tapped holes
Mounting Holes on the base : M6 tap and M4 CBR
Design
: Modular type
Configuration
: Multi axis
OPTOMECHANICS
Venier Readout
Guide way
Suitable for Z axis stage. Heavy load capacity - prevents
sudden fall down while unlocking
4mm Pitch ball screw
4mm Ball screw with Gearbox
Pitch
: 4mm
Lead screw type : Rolled
Gear ratio
: 1: 8
Linear resolution : 0.5mm/rotation
Readout
Feature
: Heavy load capacity in Z axis
4mm Pitch
Ball screw
Model No.
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
4mm Pitch
Ball screw
With 1:6 Gear Box
Model No.
Load Capacity
Vertical(Z Axis)
Kg
LTTS125-100
LTTS125-150
LTTS125-200
LTTS125-300
LTTS125-500
50
50
50
45
45
10
10
10
10
10
LTTS125-100F
LTTS125-150F
LTTS125-200F
LTTS125-300F
LTTS125-500F
35
35
35
30
30
Travel
UV-VIS-IR OPTICS
Pitch
: 4mm
Ball screw type : Rolled
Liner resolution : 4mm/rotation
Readout
Feature
: Precision movement with
4mm pitch ball screw
Length
T
L
100
200
200
300
500
340
390
440
540
740
POSITIONING DEVICES
Drive Details
HAB-LTTS-125
Size : 125x125mm
Base Plate
BP-LTTS125-100
BP-LTTS125-150
BP-LTTS125-200
BP-LTTS125-350
BP-LTTS125-500
Base plates :
conveniently.
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
173
033
PHYSICS INSTRUMENTS
Vertical Bracket
VAB-LTTS125-100
VAB-LTTS125-150
VAB-LTTS125-200
VAB-LTTS125-350
VAB-LTTS125-500
can be constructed by combining
two angle brackets.
◄
033
Accessories
Horizontal Bracket
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
LTTS-150 Series
RAILS & CARRIERS
Engraved vernier scales are
provided with all LTTS
series translation stages.
Venier Readout
Guide way
OPTOMECHANICS
: 0.1mm
Guide way
Drive
Construction
Finish
: Black anodized
: M6 tapped holes
Design
: Modular type
Configuration
: Multi axis
Drive Details
UV-VIS-IR OPTICS
Pitch
: 4mm
Readout
Feature
Pitch
: 4mm
Gear ratio
: 1: 8
Readout
Feature
POSITIONING DEVICES
4mm Pitch
Ball screw
Model No.
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
4mm Pitch
Ball screw
With 1:6 Gear Box
Model No.
Load Capacity
Vertical(Z Axis)
Kg
LTTS150-100
LTTS150-150
LTTS150-200
LTTS150-300
LTTS150-500
LTTS150-750
55
55
55
50
45
45
15
15
15
15
15
15
LTTS150-100F
LTTS150-150F
LTTS150-200F
LTTS150-300F
LTTS150-500F
LTTS150-750F
55
55
55
55
45
45
Angle Brackets :
vertical ones. Horizontally fixed height platforms
can be constructed by combining two angle
brackets.
034
PHYSICS INSTRUMENTS
Base plates :
translation stages to breadboards and
tables conveniently.
Vertical Bracket
VAB-LTTS150-100
VAB-LTTS150-150
VAB-LTTS150-200
VAB-LTTS150-300
VAB-LTTS150-500
VAB-LTTS150-750
Travel
Length
T
L
100
150
200
300
500
750
335
385
435
535
735
985
Accessories
Horizontal Bracket
HAB-LTTS-150
Size : 150x150mm
Base Plate
BP-LTTS150-100
BP-LTTS150-150
BP-LTTS150-200
BP-LTTS150-300
BP-LTTS150-500
BP-LTTS150-750
PAGE
174
034
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
LTTS-200 Series
36
73
RAILS & CARRIERS
Engraved vernier scales
are provided with all LTTS
series translation stages.
: 0.1mm
Guide way
Drive
Construction
Finish
: Black anodized
: M6 tapped holes
Design
: Modular type
Configuration
: Multi axis
4mm Pitch
Ball screw
Model No.
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
4mm Pitch
Ball screw
With 1:8 Gear Box
Model No.
Load Capacity
Vertical(Z Axis)
Kg
LTTS200-100
LTTS200-150
LTTS200-200
LTTS200-300
LTTS200-500
LTTS200-750
90
90
90
90
85
75
10
10
10
10
10
10
LTTS200-100F
LTTS200-150F
LTTS200-200F
LTTS200-300F
LTTS200-500F
LTTS200-750F
90
90
85
85
80
70
Vertical Bracket
VAB-LTTS200-100
VAB-LTTS200-150
VAB-LTTS200-200
VAB-LTTS200-300
VAB-LTTS200-500
VAB-LTTS200-750
Accessories
Horizontal Bracket
HAB-LTTS-200
Size : 200x200mm
Base Plate
BP-LTTS200-100
BP-LTTS200-150
BP-LTTS200-200
BP-LTTS200-300
BP-LTTS200-500
BP-LTTS200-750
Travel
UV-VIS-IR OPTICS
Pitch
: 4mm
Gear ratio
: 1: 8
Readout
Feature
Length
T
L
100
150
200
300
500
750
335
385
435
535
735
985
POSITIONING DEVICES
Pitch
: 4mm
Readout
Feature
035
ACCESSORIES
It is used to transform
horizontal translators into to
vertical ones.
Horizontally
fixed height platforms can be
constructed by combining two
angle brackets.
Base plates :
conveniently.
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
175
035
PHYSICS INSTRUMENTS
Drive Details
OPTOMECHANICS
Venier Readout
Guide way
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
LTTS-250 Series
Venier Readout
Guide way
RAILS & CARRIERS
: 0.1mm
Guide way
Drive
Construction
Finish
: Black anodized
: M6 tapped holes
Design
: Modular type
Configuration
: Multi axis
OPTOMECHANICS
Carriage Size : 250mm to 250mm
Drive Details
Pitch
: 4mm
Readout
Feature
UV-VIS-IR OPTICS
POSITIONING DEVICES
036
Pitch
: 4mm
Gear ratio
: 1: 8
Readout
Feature
4mm Pitch
Ball screw
Model No.
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
4mm Pitch
Ball screw
With 1:8 Gear Box
Model No.
Load Capacity
Vertical(z Axis)
Kg
LTTS250-100
LTTS250-150
LTTS250-200
LTTS250-300
LTTS250-500
LTTS250-750
LTTS250-1000
120
120
120
120
100
100
100
10
10
10
10
10
10
10
LTTS250-100F
LTTS250-150F
LTTS250-200F
LTTS250-300F
LTTS250-500F
LTTS250-750F
LTTS250-1000F
100
100
100
100
90
90
80
Vertical Bracket
PHYSICS INSTRUMENTS
VAB-LTTS250-100
VAB-LTTS250-150
VAB-LTTS250-200
VAB-LTTS250-300
VAB-LTTS250-500
VAB-LTTS250-750
VAB-LTTS250-1000
Accessories
Horizontal Bracket
HAB-LTTS-250
Size : 250x250mm
Base Plate
BP-LTTS250-100
BP-LTTS250-150
BP-LTTS250-200
BP-LTTS250-300
BP-LTTS250-500
BP-LTTS250-750
BP-LTTS250-1000
Travel
Length
T
L
100
150
200
300
500
750
1000
440
490
540
640
840
1090
1340
ACCESSORIES
It is used to transform
horizontal translators into
vertical ones.
Horizontally
fixed height platforms can be
constructed by combining two
angle brackets.
Base plates :
conveniently.
PAGE
176
036
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
MOTORIZED STAGES
Motorized
Goniometer 1
Rotary
Encoder Optional
Motorized
Goniometer 2
RAILS & CARRIERS
Z Axis Motorized
Translation Stage
LMS Series
Motorized
Goniometer 2
OPTOMECHANICS
Linear Encoder
Optional
X Axis Motorized
Translation
Stage LMS Series
Stepper Motor
UV-VIS-IR OPTICS
Base Plate
Motorized Stages from HOLMARC
Precision Ground screw drive
Precision Ball screw drive
Vacuum Compatibility
POSITIONING DEVICES
Theta Stage
R
ON
ICS PV
T
TO-MEC
OP
D
HOLMARC
XYZ Theta Stage
XZ Theta Stage
LMARC
HO
.
T
H
T
L
A
XY Theta Stage
lAB
QC
All Products are manufactured and marketed by
HOLMARCTM Opto-Mechatronics Pvt. Ltd
For more products and informations, please log on to www.holmarc.com or contact us at [email protected]
I N S T R U M E N T S
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
177
037
PHYSICS INSTRUMENTS
037
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
CONTROL ELECTRONICS AND SOFTWARE
RAILS & CARRIERS
► Bipolar drive
► PWM current control
► 1A / 5A drives
► 1/16 micro step
► Microprocessor controlled
► Power down mode
► Position & speed control
► Acceleration /deceleration
► Trigger I/O
► In-built power supply
► Customizable number of freedom
► PC based operation
► Serial port (RS232C) connectivity
► Optional USB to serial converter
Holmarc offers a wide range of high-precision micro positioning devices and systems. Micro
Position Controller along with a combination of one or more of the MTS, LTMS or MTTS stages
make a high accuracy positioning system for research, commercial and industrial applications.
The option for selecting any of the various models of motorized translation stages makes it easy to
develop a complete position control system involving any or all of the three linear or rotational
axes.
Microstep
Configuration
½
1/4
1/16
1/128
OPTOMECHANICS
Holmarc stepper motor controller has microstep drives offering microstepping down to 128
microsteps per step. Usually stepper motor has 200 steps per revolution. We can increase step
per revolution by using drives which can divide a single step in to 128 microstep. This allows much
higher resolution up to 25600 micro steps per revolution.
Micro position controller unit also supports encoder feedback. A built in algorithm counts the
incoming pulses from the encoder and compares it with the commanded number of steps to
verify the accuracy of movement.
UV-VIS-IR OPTICS
Multi Axis Positioning
Holmarc provides up to 6 axes positioning controllers
for all motion applications, individually programmable
for stepper motion control. Multi axis position
controller is recommended for a wide variety of both
simple and complex motion applications.
micro steps
per revolution
400
800
3200
25600
Customized Motion Control
and Data Acquisition Systems
Holmarc also provides custom motion
controllers with graphics LCD and micro switch
keyboard which facilitates stand alone operation
with a wide range of functions, without
interfacing to a PC. The user interface in these
systems can be developed according to the
specific application. Hence, the user is freed
from meddling with unwanted features. The
short learning curve also allows the user to
dedicate more time to the actual task.
We will help you to develop a complete system
for your motion control and data acquisition
application using Holmarc's wide range of
standard and custom products and any third
party instruments which have commonly used
hardware or software interfaces like RS232,
GPIB, DCOM etc.
Fig. 4 Axes position controller with handheld unit
POSITIONING DEVICES
Handheld Motion Control System
Hand-held stepper motor controller-driver offers up to 4
axes control for actuators, linear stages and rotation
stages. The hand held unit features 128X micro
stepping ratio for smooth, high resolution positioning.
Two primary control modes are selectable, manual
control and computer control.
038
PHYSICS INSTRUMENTS
To drive the stage using a PC, a command set will be
provided which can be used to communicate with the
controller using LabVIEW or any other programming
language through RS 232 port.
PAGE
178
038
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
Position Controller is an easy-to-use software interface for Holmarc
positioning system. It allows the user to operate the system in two modes,
namely Manual and Programmable.
>> Commands
► Home
► Move
► Speed
► Wait
► Loop
► Goto
► Reset
► Trigger in
► Trigger out
The Micro Position Controller software has a very short learning curve.
According to the application requirements, the stages can be operated at
different speeds and motion profiles, incorporate delay in between the
movements to perform other tasks, trigger external devices or circuits and
get itself triggered by an external trigger source. The software enables the
user to program each movement of the stage in the form of the following
commands executed sequentially.
Manual Mode
There are 4 buttons in the Manual mode region of the dialog window, the functions of which are
explained below.
: Move the stage one step towards far-end.
: Move the stage one step towards home.
: Move the stage continuously towards far-end. Click again to stop the movement.
: Move the stage continuously towards home. Click again to stop the movement.
Home
Reset
: Move the stage towards home. Click again to stop the movement.
: Click this button to reset the position display to zero.
Precise
AUTOMATION
We offer a wide range of positioning devices for
precision applications.
Motorized Translation Stages - 104
Motorized Rotation Stages -125
Motorized Actuators - 105
.
Programmable mode
OPTOMECHANICS
>
<
>>
<<
RAILS & CARRIERS
Software
TABLE OF CONTENTS
RESEARCH TOOLS
This mode enables the user to write a program, containing instructions to move different stages
simultaneously, set the speed, incorporate delays and loop a set of instructions, execute that
program and save it for later use.
Instruction Set
Micro-Position Controller
Model No:
MPCL1 L-OL
MPCL2 L-CL
MPCL3 L-OL
MPCL4 L-CL
MPCL6 L-OL
MPC4L-OL-H
Number of axis
1
2
3
4
6
4
Motor Type
Stepper
Servo
Stepper
Servo
Stepper
Stepper
Motor Torque(kg cm)
1.5
7
10
15
31
7
Control
Open Loop
Closed Loop
Open loop
Closed Loop
Open Loop
Closed Loop
Typical Pay load(kg)*
20
35
50
60
80
35
Option
None
None
None
None
None
Hand Held Unit
POSITIONING DEVICES
UV-VIS-IR OPTICS
Home W
: Moves the stage of the axis specified towards home.
Move [Displacement] : Moves the stage for the specified displacement in degree.
Wait Incorporates a delay.
Speed
: Set the speed.
Trigger IN
: The program waits for an external trigger which is a TTL pulse
applied through the Trigger Input on the front panel of the controller.
Trigger OUT
: The controller output a trigger which is a TTL pulse.
Loop [index, address] : The program loops index times from the address specified.
Goto address
: The program jumps to the address specified.
Reset W
: Resets the position display of the axis specified to zero.
039
Precision 2Axes
Translation stage
PHYSICS INSTRUMENTS
* Typical payload for a linear translation stage, mounted horizontally, driven by the specified model
Travel
X-50mm (Micrometer)
Y-200mm (Motorized)
Size : 600X300mm
contact us at [email protected]
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
179
039
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Interface Unit
Translation Stage
RAILS & CARRIERS
Customized Motion Control and
Data Acquisition Applications
Measurement of spatial distribution of
►Magnetic field strength of medium and large sized electromagnets.
►Microwave and RF signal intensity of antennae.
►Optical intensity of scattered, reflected or transmitted light in
optical systems.
We manufacture customized systems for
motion control and positioning applications in
various scientific and industrial fields.
Multidimensional position control of
►Mirror mounts, polarizers and light sources in optical systems.
►Samples in nonlinear optics experiments.
►Sensors and other components inside vacuum chambers and
glove boxes.
►High power laser head for laser cutting applications.
►Spindles for marking and engraving applications.
►Nanofiber Electrospinning targets for weaving of nanofibers.
We assist our clients in finding efficient
technical solutions for position and motion
control.
OPTOMECHANICS
Please feel free to contact us
HOLMARC Opto-Mechatronics Pvt. Ltd
OFFICE ADDRESS
Material Science
Stress and strain analysis of fibers
B.7.H.M.T.INDUSTRIAL ESTATE,
H.M.T.P.O,KALAMASSERY
KOCHI,KERALA,INDIA
Ph.No. 91-484 2540075
[email protected] [email protected]
Climate Science
Sun tracking
Motorized Translation stage Ordering Information
UV-VIS-IR OPTICS
POSITIONING DEVICES
Travel
- ......... mm
Carriage Size
- ......... LxW (linear) or diameter (rotary) in mm
Load Capacity
- ......... Kg
Resolution
- ......... micron (linear) or arc sec (rotary)
Accuracy
- ......... micron (linear) or arc sec (rotary)
Speed
- ......... mm/sec (linear) or degree/sec (rotary)
Configuration
- ......... X, Y, Z (linear)
A (Yaw) ,B (Pitch),C (Roll) (rotary)
C (Roll)
B (Pitch)
A (Yaw)
Rotary Motions
Z
Combination : It is possible to select different combinations
like XY, XZ, XYZ, XYA, XZA, XYZA, XYZB, XYZC, XYZAB,
XYZBC, XYZABC.
User Interface
- ......... PC, hand held unit, both.
Control
- ......... Closed loop & open loop
040
X
Y
PHYSICS INSTRUMENTS
Closed loop control : It uses an encoder attached to stage or
motor which gives feed back of motion of the stage or motor.
Open loop control : It depends on accuracy of steps of the
motor and does not have a feedback from encoder.
linear Motions
' 91-484 2540075 791-484 2540882
Get in touch with our technical experts and discuss your application
needs, unique requirements or any other technical issues.
www.holmarc.com
[email protected]
PAGE
180
040
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Ready to use linear stages
from holmarc are cost effective solutions for linear positioning.
Various designs to suit multitudes of applications
in industry and research.
RAILS & CARRIERS
Holmarc manufactures motorized linear translation stages in ready to
operate design for applications in research and manufacturing. We
have categorized our regularly manufactured stages in to four
different series, namely MTS, LMS, LTMS and RCMTS based on their
design. All these stages are modular in design and construction.
Multi-axes configurations are possible by assembling single axis
stages at user end. For standard stages, construction material is
aluminum alloy. We make stages in stainless steel and mild steel as
well for custom requirements.
Actuator:
Stepper motors are used as electrical actuators. DC or AC servos can
as well be used for custom requirements for all our standard models.
Precision Ground screw drive
Precision Ball screw drive
Vacuum Compatibility
HOLMARC
UV-VIS-IR OPTICS
Drive:
Either ground lead screws or rolled ball screws are used as
mechanical drive. For ground lead screw, nut is spring loaded to
minimize play and back-lash.
OPTOMECHANICS
Linear Guides:
Preloaded rolling contact bearings are used as guide ways. Both
non-re-circulating type and re-circulating type guides are used
depending upon the design and use. For non-re-circulating type,
rollers are used as rolling elements where as for re-circulating type,
balls are used as rolling elements.
Get in touch with our design team for custom designed motorized translation stages
Selection of ball screw or lead screw pitch depends upon the speed and resolution requirements. Drive electronics of stepper motor
decides both these parameters. In all our standard stages, we use 200 steps/revolution stepper motors. For ball crews, 2 mm and 4
mm are the standard pitch in our stages. For lead screws, pitch can be 0.5 mm, 1 mm, and 2 mm.
For any standard stage with specified lead screw/ ball screw pitch, resolution can vary depending on the drive electronics. There are
micro-step driver cards for the stepper motors having 1/8 to 1/256 micro steps.
POSITIONING DEVICES
PITCH, STEP & RESOLUTION
PHYSICS INSTRUMENTS
041
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
181
041
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Motorized Actuator
RAILS & CARRIERS
Holmarc's motorized actuator can be used to replace micrometers
in manual translation stages or lead screws in kinematic mounts for
making the positioning automated. Drive is achieved by a stepper
motor coupled to a precision ground lead screw–nut mechanism.
The spindle of the actuator which moves forward and backward
when the motor rotates is made non-rotating to bring in extra
precision. Construction material is stainless steel . Our standard
position controllers can be used to drive these actuators without any
customization. Holmarc can supply kinematic mounts and stages
fitted with these actuators for custom applications. You are welcome
to discuss your needs with our sales engineers.
Controller Sold Separately.
Please refer page 179.
Specifications :
OPTOMECHANICS
Travel
Positioning Accuracy
Resolution
Construction
Finish
MODEL No.
HO-MA-15
HO-MA-25
: Up to 25mm
: 0.01mm
: 0.001mm
: Black anodized
Resolution
0.001mm
0.001mm
Travel
15mm
25mm
HOLMARC Advanced Precision Motion Systems
NANO
HOLMARC NANO POSITIONING SYSTEMS
POSITIONING DEVICES
042
w
e
N
UV-VIS-IR OPTICS
Piezo Nanopositioner & Controllers
TM
Piezo actuators make a great replacement for stepper motors when much higher precision
nano scale positioning is required. Holmarc Piezo Actuators are high-resolution nano
positioning system designed for a variety of applications in nano technology, bio
technology etc. We offers the Piezo Actuators and Translators for scientific and industrial
applications. In addition to the standard products, we manufacture custom designs
tailored to customers’ requirements.
PHYSICS INSTRUMENTS
Actuators
Scanning Stages
Microscope Stages
Objective NanoPositioner for Microscopy
Fast Piezo Focus Positioners
Single Axis Stages
Multiaxis Stages
Compact X / XY / XYZ Systems
Custom Piezo Stages & Systems
HOLMARC OPTO-MECHATRONICS PVT. LTD
KOCHI, KERALA,INDIA
Ph.No. +91-484 2540075 Fax : +91-484 2540882
For more products and information,
visit us @
www.holmarc.com
E-mail: [email protected] / [email protected]
Follow us on
PAGE
182
042
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Motorized Translation Stages – MTSM series
RAILS & CARRIERS
Holmarc's MTS-M series motorized stages are miniature in size with
footprint as small as 35 mm x 35 mm. Drive motor is stepper with 28 mm
frame size. The stage features precision V grooved guides with balls and
precision ground leasdcrew drive having 1 mm /0.4 mm pitch. Standard
stages are constructed in aluminium alloy though stainless steel stages
can also be manufactured on request. There are four footprint sizes to
choose from as described in the drawing.
These stages are available in five factory assembled configurations ( x ,
XY, XYZ, Z and XZ). Please see the chart below for details.
OPTOMECHANICS
It is used to transform horizontal translators into vertical ones.
Horizontal fixed height platforms can be constructed by
combining two angle brackets.
Straight Line Accuracy : 10 Micron
Guide way
: Precision V grooved guide way
Drive
Construction
: Aluminum alloy B51S
Finish
: Black anodized
Tapped Holes on Moving Plate : M4 tapped holes
Mounting Holes
: M3 tapped holes
◄
Base plates :
translation stages to breadboards
and tables conveniently.
4mm Pitch Lead Screw
0.4mm Pitch Ground Lead screw
Positioning Accuracy : 0.1mm
Repeatability
: 0.2mm
Resolution
: 0.01mm
Speed
: 16 mm/Sec.(4 rps)
Repeatability
: 0.01mm
Resolution
: 0.0003125 (Micro Step Mode)
Speed
: 4mm/Sec.(4 rps)
: 0.002mm
Repeatability
Resolution
: 0.000125 (Micro Step Mode)
Speed
: 1.2mm/Sec.(4 rps)
1mm Pitch
Lead Screw
Model No:
--MTSM-3535
--MTSM-3550
--MTSM-3760
--MTSM-5050
--MTSM-5065
--MTSM-5075
MTSM-5065-HC MTSM-5065H
0.4mm Pitch
Lead Screw
Model No:
Travel
Load
Capacity
X -Axis
Load
Capacity
Z - Axis
Base Plate
Vertical Bracket
Horizontal Bracket
MTSM-3535F
MTSM-3550F
MTSM-3760F
MTSM-5050F
MTSM-5065F
MTSM-5075F
MTSM-5065HF
MTSM-5075HF
MTSM-5090HF
10mm
15mm
50mm
15mm
25mm
50mm
25mm
50mm
75mm
1kg
1kg
1kg
2kg
2kg
2kg
5kg
5kg
5kg
0.4kg
0.4kg
0.4kg
0.7kg
0.7kg
0.7kg
1kg
1kg
1kg
BP-MTSM-3535
BP-MTSM-3550
BP-MTSM-3760
BP-MTSM-5050
BP-MTSM-5065
BP-MTSM-5075
BP-MTSM-5065H
BP-MTSM-5075H
BP-MTSM-5090H
VB-MTSM-3535
VB-MTSM-3550
VB-MTSM-3760
VB-MTSM-5050
VB-MTSM-5065
VB-MTSM-5075
VB-MTSM-5065H
VB-MTSM-5075H
VB-MTSM-5090H
HB-MTSM-3535
HB-MTSM-3535
HB-MTSM-3760
HB-MTSM-5050
HB-MTSM-5050
HB-MTSM-5075
HB-MTSM-5065H
HB-MTSM-5075H
HB-MTSM-5090H
MTSM-3550
MTSM-3760
043
PHYSICS INSTRUMENTS
MTSM-3535
ACCESSORIES
POSITIONING DEVICES
4mm Pitch
Lead Screw
Model No:
UV-VIS-IR OPTICS
Drive Details
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
183
043
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
MTSM-5050
MTSM-5065
MTSM-5065H
RAILS & CARRIERS
MTSM-5075
MTSM-5075H
MTSM-5090H
OPTOMECHANICS
Motorized Translation Stages-MTS series
UV-VIS-IR OPTICS
MTS series stages are compact and modular motorized positioners for
short travel applications. (Up to 50 mm travel range). Stepper motor is used
as electrical actuator. It has V grooved precision guide ways using crossed
rollers. Construction material used for standard stage is aluminium alloy.
Linear drive is by a ground lead screw-nut combination. There are two limit
switches built in to the system, one for home and other for far end. Electrical
junction box with a suitable 9 pin connector is also a standard feature.
These stages are X, XY, XYZ, XZ &Z axis configurable with the help of angle
bracket and base plates
POSITIONING DEVICES
044
We provided suitable mounting holes for
assembling multy axis configurations
Stright line accuracy
Guide way
PHYSICS INSTRUMENTS
: 2µm
: Precision V grooved
guide way
Drive
: Precision ground lead screw
Construction
Finish
: Black anodized
Tapped holes on moving plate
: M6 tapped holes
Mounting holes on the base Plate : M3/M6 C’bored holes
PAGE
184
044
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
Configurations
Accessories
Load Capacity
10 Kg
10 Kg
2 Kg
2 Kg
2 Kg
MTS-6565-2-01
MTS-6565-2-02
MTS-6565-2-03
MTS-6565-2-04
MTS-6565-2-05
MTS-9090-1-01
MTS-9090-1-02
MTS-9090-1-03
MTS-9090-1-04
MTS-9090-1-05
14 Kg
14 Kg
3 Kg
3 Kg
3 Kg
MTS-9090-2-01
MTS-9090-2-02
MTS-9090-2-03
MTS-9090-2-04
MTS-9090-2-05
MTS-90115-1-01
MTS-90115-1-02
MTS-90115-1-03
MTS-90115-1-04
MTS-90115-1-05
14 Kg
14 Kg
3 Kg
3 Kg
3 Kg
MTS-90115-2-01
MTS-90115-2-02
MTS-90115-2-03
MTS-90115-2-04
MTS-90115-2-05
10 Kg
10 Kg
2 Kg
2 Kg
2 Kg
Angle Bracket
Model AB-MTS 6565
Base Plate Model
BP-MTS-6565
X Axis
XY Axis
XYZ Axis
Z Axis
XZAxis
Angle Bracket
Model AB-MTS 9090
Base Plate Model
BP-MTS-9090
X Axis
XY Axis
XYZ Axis
Z Axis
XZAxis
Angle Bracket
Model AB-MTS 90115
Base Plate Model
BP-MTS-90115
X Axis
XY Axis
XYZ Axis
Z Axis
XZAxis
RAILS & CARRIERS
MTS-6565 Series,Travel-10mm
MTS-6565-1-01
MTS-6565-1-02
MTS-6565-1-03
MTS-6565-1-04
MTS-6565-1-05
15 Kg
15 Kg
5 Kg
5 Kg
5 Kg
Drive Details
15 Kg
15 Kg
5 Kg
5 Kg
5 Kg
0.4mm pitch ground lead screw
Positioning accuracy : 0.01mm
: 0.01mm
Repeatability
Resolution
: 0.0003125
(in micro step mode)
Speed
: 4mm/sec (4 rps)
Positioning accuracy : 0.001mm
Repeatability
: 0.001mm
Resolution
: 0.000125
(in micro step mode)
Speed
: 1.2mm/sec (4 rps)
MTS 65-65
OPTOMECHANICS
MTS 90-90
ACCESSORIES
MTS 90-115
It is used to transform horizontal translators into vertical
ones. Horizontally fixed height platforms can be
UV-VIS-IR OPTICS
Load Capacity
Model No:
1mm pitch
Lead screw
POSITIONING DEVICES
Model No:
0.4mm pitch
Lead screw.
TABLE OF CONTENTS
RESEARCH TOOLS
PHYSICS INSTRUMENTS
045
Base plates :
◄
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
185
045
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Motorized Translation Stages-MTSZZ series
RAILS & CARRIERS
In these stages, servo motors (brush less DC) are used as electrical
actuators. The servo motors offer higher speed and smoother
operations compared to stepper motor driven stages (MTS series
stages described earlier). Feedback is by either rotary optical encoder
or by linear encoder. Better absolute accuracy can be expected from
linear encoder based stages compared to the stages fixed with rotary
encoder s as the accuracy of the lead screw do not play any role in the
former case. Apart from the drive motor, all other features and
specifications are same as those of standard MTS series stages.
OPTION-1 Servo Motor RE10
1mm Pitch
Ground lead screw
OPTION-2 Servo Motor - RE25
OPTOMECHANICS
Guide way
: Precision V Grooved Guide
Drive
: Precision Lead screw
Construction
Finish
: Black anodized
Tapped Holes on Carriage : M6 Tapped Holes
Mounting Holes on the base : M6 Tapped Holes
Linear Accuracy
0.0004mm,
Resolution
0.0001mm
Maximum Speed
40mm/sec
Linear Accuracy
0.002mm,
Resolution
0.0005mm
Maximum Speed
50mm/sec
2
Accessories
Angle Bracket
It is used to transform horizontal translatorsto vertical
ones.Horizontally fixed height platforms can be
Model No:
AB - MTS - 9090
MTS - ZZ - 9090
Model No:
AB - MTS - 90115
MTS - ZZ - 90115
Base Plate
Suitable Stage
◄
UV-VIS-IR OPTICS
Base plates :
Suitable Stage
Model No:
BP - MTS - 9090
MTS - ZZ - 9090
Model No:
BP - MTS - 90115
MTS - ZZ - 90115
MTSZZ-9090-01
MTSZZ-90115-01
POSITIONING DEVICES
Model Number
Option 1
Option 1
Option 2
MTSZZ-9090 series, Travel-25mm
PHYSICS INSTRUMENTS
MTSZZ-9090-RE10-01
MTSZZ-9090-RE10-02
MTSZZ-9090-RE10-03
MTSZZ-9090-RE10-04
MTSZZ-9090-RE10-05
Model Number
Load
Capacity
046
MTSZZ-9090-RE25-01
MTSZZ-9090-RE25-02
MTSZZ-9090-RE25-03
MTSZZ-9090-RE25-04
MTSZZ-9090-RE25-05
Option 2
Load
Capacity
Configuration
6 Kg
6 Kg
3 Kg
3 Kg
3 Kg
x
xy
xyz
z
xz
MTSZZ-90115 series, Travel-50mm
5 Kg
5 Kg
3 Kg
3 Kg
3 Kg
MTSZZ-90115-RE10-01
MTSZZ-90115-RE10-02
MTSZZ-90115-RE10-03
MTSZZ-90115-RE10-04
MTSZZ-90115-RE10-05
MTSZZ-90115-RE25-01
MTSZZ-90115-RE25-02
MTSZZ-90115-RE25-03
MTSZZ-90115-RE25-04
MTSZZ-90115-RE25-05
PAGE
186
046
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
Motorized Translation Stages- LMS Series : Stepper motor
Model no:
2mm Pitch Ground Lead screw
: 0.0025mm
Repeatability
Resolution
: 0.0003125
(in Micro Step Mode)
: 0.005mm
Repeatability
Resolution
: 0.000125
Travel(mm)
LMS 75100 - 1
LMS 75100 - 2
LMS 75150 - 1
LMS 75150 - 2
LMS 75200 - 1
LMS 75200 - 2
LMS 100100 - 1
LMS 100100 - 2
LMS 100150 - 1
LMS 100150 - 2
LMS 100200 - 1
LMS 100200 - 2
LMS 150150 - 1
LMS 150150 - 2
LMS 150200 - 1
LMS 150200 - 2
LMS 200200 - 1
LMS 200200 - 2
50
100
150
50
100
150
100
150
150
Lead screw
Pitch
Resolution
(Half Step)
Load Capacity
(Kg)
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
2 mm
1 mm
0.005mm
0.0025mm
0.005mm
0.0025mm
0.0 0125mm
0.0025mm
0.0 0125mm
0.0025mm
0.0 0125mm
0.0025mm
0.0 0125mm
0.0025mm
0.0 0125mm
0.0025mm
0.0 0125mm
0.0025mm
0.0 0125mm
0.0025mm
8
10
9
11
11
14
16
15
15
17
17
19
16
18
22
25
30
35
Angle Brackets :
It is used to transform horizontal translators into vertical ones.
Horizontally fixed height platforms can be constructed by
combining two angle brackets.
Accessories
Size L X B
(mm)
Angle Bracket
Base Plate
100 x 75
AB - LMS 75100
BP - LMS 75100
150 x 75
AB - LMS 75150
BP - LMS 75150
200 x 75
AB - LMS 75200
BP - LMS 75200
100 x 100
AB - LMS 100100
BP - LMS 100100
150 x 100
AB - LMS 100150
BP - LMS 100150
200 x 100
AB - LMS 100200
BP - LMS 100200
150 x 150
AB - LMS 150150
BP - LMS 150150
200 x 150
AB - LMS 150200
BP - LMS 150200
200 x 200
AB - LMS 200200
BP - LMS 200200
ACCESSORIES
Base plates :
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
OPTOMECHANICS
047
PHYSICS INSTRUMENTS
Drive Details
LMS series motorized stages provide travel up to 150 mm. Drive mechanism comprises of
precision ground lead screw and preloaded nut. Stepper motor used is of 56 mm frame size and
10 kg-cm torque. There are limit switches for home and far end loctation. Electrical junction box
with a 9 pin connector is also a standard feature. Linear ways using V grooved guides and
crossed rollers are used for playless and stick slip free precision positioning. Standard stages
are constructed in aluminium alloy and finished by black anodizing. Tapped holes are provided
on top and bottom surfaces for mounting. XY and XYZ configurations can be assembled from
single axis stages with the use of accessories like base plates and angle brackets.
UV-VIS-IR OPTICS
XY Configuration
RAILS & CARRIERS
: 10 Micron
: Precision V Grooved
Pitch 1mm / 2mm
Construction
Finish
: Black anodized
Tapped Holes on Moving Plate : M6 Tapped Holes
Mounting Holes on the base Plate : M6 Tapped Holes
POSITIONING DEVICES
Straight line Accuracy
Guide way
Drive
187
047
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Drawings For LMS Stages
RAILS & CARRIERS
LMS-75-200
LMS-100-150
LMS-150-200
OPTOMECHANICS
LMS-75-150
UV-VIS-IR OPTICS
POSITIONING DEVICES
Fully Automated
HOLMARC
Sky DRIVE
TM
FULLY AUTOMATED NEWTONIAN TELESCOPES
Newtonian Reflective
Telescopes
TM
HOLMARC
IMAGE
ANALYZER PRO
CUSTOM
Model : HO-EQ-APFAT500,
HO-EQ-APFAT400 &
HO-EQ-APFAT300
CONFIGURABLE
DESIGNED FOR
RESEARCH
HOLMARC SkyDRIVE
ranges are standard
Newtonian reflector
telescopes based on parabolic
mirrors with of excellent quality
and versatility, ranging in aperture
from a respectable 300mm to
500mm aperture, catering for
astronomers of all levels.
048
PHYSICS INSTRUMENTS
Unique design telescope suitable for the
UNIVERSITY RESEARCH
LMS-200-200
Suitable for LIDAR, Raman LIDAR and other
ranging and sensing application
PAGE
188
048
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC CUSTOM TELESCOPES
ASTRO-Imaging
HOLMARC
HOLMARC
Motorized Translation Stages-LMSZZ Series : SERVO BASED
LMS-ZZ series stages make use of BLDC motors as electrical
actuators. Brushless DC (BLDC) motors provide better speed and
vibration characteristics compared to stepper motors. Feedback can
either by rotary encoder fixed to the shaft of the motor or by linear
encoder. In the case of linear encoder, absolute accuracy of the stage
is independent of the accuracy of the leadscrew. Hence better
accuracy of positioning can be expected from linear encoder based
stages compared to stages fixed with rotary encoder. Holmarc
manufactures LMS-ZZ series stages fixed with either rotary or linear
encoders as standard products as described in the table below. Apart
from drive motor and feedback device, all other features remain same
as of our LMS series stages detailed in the preceding page.
50
100
150
50
100
150
100
150
150
OPTOMECHANICS
Load Capacity
(Kg)
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
Servo Motor RE10
Servo Motor RE25
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Accessories
Size L X B
(mm)
Angle Bracket
Base Plate
100 x 75
AB - LMS 75100
BP - LMS 75100
150 x 75
AB - LMS 75150
BP - LMS 75150
200 x 75
AB - LMS 75200
BP - LMS 75200
100 x 100
AB - LMS 100100
BP - LMS 100100
150 x 100
AB - LMS 100150
BP - LMS 100150
200 x 100
AB - LMS 100200
BP - LMS 100200
150 x 150
AB - LMS 150150
BP - LMS 150150
200 x 150
AB - LMS 150200
BP - LMS 150200
200 x 200
AB - LMS 200200
BP - LMS 200200
OPTION-1 Servo Motor RE10
C
HA
TRONIC
V
T.
HOLMARC
LTD
OPT
Setup your
S
O-
E
P
M
100+
OPTION-2 Servo Motor - RE25
049
PHYSICS
LAB
Experiments
Contact at
Lab with HOLMARC [email protected]
Optical rail & Breadboards
Linear Accuracy : 0.002mm,
Resolution : 0.0005mm
Speed : 50mm/sec Max.
Linear Accuracy :0.0004mm,
Resolution : 0.0001mm
Speed : 40mm/sec Max.
PAGE
VISIT US @
www.holmarc.com
UV-VIS-IR OPTICS
LMSZZ 75100 - RE10
LMSZZ 75100 - RE25
LMSZZ 75150 - RE10
LMSZZ 75150 - RE25
LMSZZ 75200 - RE10
LMSZZ 75200 - RE25
LMSZZ 100100 - RE10
LMSZZ 100100 - RE25
LMSZZ 100150 - RE10
LMSZZ 100150 - RE25
LMSZZ 100200 - RE10
LMSZZ 100200 - RE25
LMSZZ 150150 - RE10
LMSZZ 150150 - RE25
LMSZZ 150200 - RE10
LMSZZ 150200 - RE25
LMSZZ 200200 - RE10
LMSZZ 200200 - RE25
Drive
Travel(mm)
POSITIONING DEVICES
Model no:
: ±10 μ for total travel length
: Precision V Grooved Guide
: AluminIum Alloy B51S
: Black anodized
: M6 Tapped Holes
: M6 Tapped Holes
0
Ph: 91-484-2540075
Fax: 91-484-2540882
189
049
PHYSICS INSTRUMENTS
►Guide way
► Drive
► Construction
► Finish
► Tapped Holes on Carriage
► Mounting Holes on the base plate
1mm Pitch
Ground lead screw
RAILS & CARRIERS
TABLE OF CONTENTS
RESEARCH TOOLS
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
RCMTS Series Motorized Stages
Z Axis With Gear Box
RAILS & CARRIERS
RCMTS series stages use re-circulating type linear bearings. Hence, the
carriage (moving part) in this case will be smaller in length than the base. As in
the case of other stages, there are two drive options, ground lead screws and
ball screws. As the carriage moves inside the length of the base, dust
protection by the use of bellows is possible. Holmarc manufacture these
stages up to a travel of 500 mm in many standard carriage sizes and load
bearing capacities. Apart from the standard stages described in this section,
we also manufacture custom stages in aluminum, steel and stainless steel for
variety of applications. Kindly contact our sales engineers for details.
Z Axis Stage
RCMTS Series
Vertical Bracket
Horizontal Bracket
Controller Unit
Y Axis Stage
RCMTS Series
Base Plate
OPTOMECHANICS
X Axis Stage
RCMTS Series
XZ Stage
UV-VIS-IR OPTICS
XYZ Stage
XY Stage
Controller
Refer Page >>
Encoder Feed Back
POSITIONING DEVICES
050
PHYSICS INSTRUMENTS
Have any
Question
We will
Help You
HOLMARC's experienced support engineers will be glad to help you
determine which product suits your needs. Call us at +91 484 2540075 or
send us a mail to [email protected] or [email protected].
KOCHI, KERALA,INDIA
Ph.No. 91-484 2540075
' 91-484 2540075 791-484 2543755
www.holmarc.com
Question ?
[email protected]
PAGE
190
050
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
RCMTS-50 Series
RAILS & CARRIERS
These stages use re-circulating type ball bearing guideway
along with a leadscrew positioned above the guideway as
shown in the drawing. This configuration helps to keep the
footprint as minimum as possible. In this case, width of the
stage is could be reduced to 50 mm. Construction is in
aluminum alloy with black anodized finish.
There are two options for leadscrew pitch, 1mm and 9 mm.
For those applications where greater speed is required, 9
mm pitch leadscrew can be considered.
Leads crew: 1mm pitch/9mm pitch
Repeatability
: 0.025mm
Resolution
: 0.0003125
Repeatability
: 0.1mm
Resolution
: 0.010
1mm Pitch
Lead screw
Model No
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
9mm Pitch
Lead screw
Model No
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
RCMTS50-50-1
RCMTS50-75-1
RCMTS50-100-1
RCMTS50-150-1
2
2
2
2
1
1
1
1
RCMTS50-50-2
RCMTS50-75-2
RCMTS50-100-2
RCMTS50-150-2
2
2
2
2
1
1
1
1
Vertical Bracket
VAB-RCMTS50-50
VAB-RCMTS50-75
VAB-RCMTS50-100
VAB-RCMTS50-150
UV-VIS-IR OPTICS
Accessories
Horizontal Bracket
HAB-RCMTS-50
Size : 50x50mm
Base Plate
BP-RCMTS50-50
BP-RCMTS50-75
BP-RCMTS50-100
BP-RCMTS50-150
angle brackets.
Travel
Length
T
L
50
75
100
150
155
180
205
280
051
Base plates :
conveniently.
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
POSITIONING DEVICES
1mm Pitch Ground Lead Screw
◄
Drive Details
: 20 Micron
: Black anodized
: M4 Tapped Holes
: M6 Tap and M4 CBR
: Modular Type
: Multi axis
191
051
PHYSICS INSTRUMENTS
Drive
Construction
Finish
Design
Configuration
OPTOMECHANICS
Controller sold separately
please refer page 183
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
RCMTS-75 Series
RAILS & CARRIERS
RCMTS-75 series are light duty stages with respect to load
capacity. Point contact ball bearing guides are used in
these stages to keep height of the stage at 42 mm which is
height of the drive motor. Bellows are provided for the
protection of the stage from dust as well as to protect the
environment from the accidental contamination from
grease used in the guideways and leadscrew drives.
Standard stages are fixed with stepper motors.
There are two models from choose from,
stages with 1 mm pitch leadscrew (low
speed) and stages with 9 mm pith
leadscrew ( high speed).
Lock : Can be Locked at desired position
OPTOMECHANICS
Drive
Construction
Finish
Design
Configuration
UV-VIS-IR OPTICS
Drive Details
: 20 Micron
: Black anodized
: M4 Tapped Holes
: M6 Tap and M4 CBR
: Modular Type
: Multi axis
RCMTS-75 Series in
XY Configuration
1mm Pitch Ground Lead Screw
: 0.025mm
Repeatability
Resolution
: 0.0003125
: 0.1mm
Repeatability
Resolution
: 0.010
POSITIONING DEVICES
1mm Pitch
Lead screw
Model No
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
4mm Pitch
Lead screw
Model No
Load Capacity
Vertical(X Axis)
Kg
Load Capacity
Vertical(Z Axis)
Kg
RCMTS75-50
RCMTS75-100
RCMTS75-150
RCMTS75-200
RCMTS75-250
2
2
2
2
2
1
1
1
1
1
RCMTS75-50-Z
RCMTS75-100-Z
RCMTS75-150-Z
RCMTS75-200-Z
RCMTS75-250-Z
2
2
2
2
2
1
1
1
1
1
Travel
Length
T
L
50
100
150
150
150
155
205
280
280
280
Vertical Bracket
PHYSICS INSTRUMENTS
VAB-RCMTS75-50
VAB-RCMTS75-100
VAB-RCMTS75-150
VAB-RCMTS75-200
VAB-RCMTS75-250
Accessories
Horizontal Bracket
HAB-RCMTS-75
Size : 75x75mm
Base Plate
BP-RCMTS75-50
BP-RCMTS75-100
BP-RCMTS75-150
BP-RCMTS75-200
BP-RCMTS75-250
angle brackets.
◄
052
Base plates :
conveniently.
PAGE
192
052
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
RCMTS-125 Series
Load Capacity :Up to 90kg vertical position
RAILS & CARRIERS
Controller sold
separately
please refer
page 183
Z-axis: In these stages in vertical
configuration, if the load is more than 15 kgs,
the carriage may come down under gravity
when power to the motor is switched off. This
is when ball screw is directly attached to the stepper motor. If the load to
be lifted is more than 15 kgs, it is advisable to use our Z axis stages with a
gear box (1:6 ratio) in between motor and ball screw. Though this reduces
speed in Z axis, load capacity increases considerably. Please see the
Drive
Construction
Finish
Design
Configuration
: 20 Micron
: Precision Lead / Ball Screw
: Black anodized
: M4 Tapped Holes
: M6 Tap and M4 CBR
: Modular Type
: Multi axis
OPTOMECHANICS
RCMTS-125 series stages are designed to
carry heavy loads, yet to move and position
precisely. Re-circulating type ball bearing
linear ways are used as guides. Drive is
provided by a combination of ball screw and
stepper motor.
4mm Pitch Ball screw With Gear Box
Gear Ratio- 1:8
4mm Pitch Ball Screw
Repeatability
: 0.05mm
Resolution
: 0.010
Speed
: 2mm/sec (4RPS)
Repeatability
: 0.04mm
Resolution
: 0.00125
Speed
: 16mm/sec (4RPS)
Load Capacity
Z Axis
(maximum holding
X Axis
kg weight at
4mm Pitch
Ball
screw
Model No
Kg
Kg
4mm Pitch
Ball screw
With 1:8 Gear Box
Model No
50
50
50
45
45
15
15
15
15
15
RCMTS125-100-F
RCMTS125-150-F
RCMTS125-200-F
RCMTS125-300-F
RCMTS125-500-F
off condition)
RCMTS125-100-2
RCMTS125-150-2
RCMTS125-200-2
RCMTS125-300-2
RCMTS125-500-2
Load Capacity
X Axis
Z Axis
Kg
Kg
90
90
86
85
80
70
70
62
60
55
Customization
HOLMARC’s experienced support
engineers will be glad to help you.
Call us at +91 484 2540075 or send us a
mail to [email protected] or
[email protected]
POSITIONING DEVICES
Drive Details
UV-VIS-IR OPTICS
Engraved vernier
scales are provided
translation stages.
L
155
205
280
280
280
Vertical Bracket
VAB-RCMTS125-100
VAB-RCMTS125-150
VAB-RCMTS125-200
VAB-RCMTS125-300
VAB-RCMTS125-500
HAB-RCMTS-125
Size : 125X125mm
Base Plate
BP-RCMTS125-100
BP-RCMTS125-150
BP-RCMTS125-200
BP-RCMTS125-300
BP-RCMTS125-500
It is used to transform horizontal translators to vertical
◄
T
50
100
150
150
150
Accessories
Horizontal Bracket
Base plates :
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
193
053
PHYSICS INSTRUMENTS
053
Travel Length
HOLMARC
HOLMARC
RESEARCH TOOLS
Load Capacity :Up to 90kg vertical
RAILS & CARRIERS
RCMTS-150 series stages are available for travel upto 150
mm. Carriage size is 150 x 150 mm. Drive is by ball screwstepper motor combination. There are bellows for dust
protection. Re-circulating type linear ways are used as guides.
Z-axis: In these stages, in vertical configuration, if the load is
more than 15 kgs, the carriage may come down under gravity
when power to the motor is switched off. This is when ball screw is directly attached to
the stepper motor. If the load to be lifted is more than 15 kgs, it is advisable to use our Z
axis stages with a gear box (1:6 ratio) in between motor and ball screw. Though this
reduces speed in Z axis, load capacity increases considerably. Please see the tables
and chart below for details.
OPTOMECHANICS
Drive
Construction
Finish
Design
Configuration
Drive Details
UV-VIS-IR OPTICS
POSITIONING DEVICES
054
Controller sold
separately
please refer
page 183
: 20-50 Micron
: Precision Lead Screw / Ball Screw
: Black anodized
: M4 Tapped Holes
: M6 Tap and M4 CBR
: Modular Type
: Multi axis
4 mm Pitch Ball screw With Gear Box
Gear Ratio- 1:8
Repeatability
: 0.04mm
Resolution
: 0.00125 (in Micro Step Mode)
Speed
: 16mm/sec (4RPS)
Repeatability
: 0.05mm
Resolution
Speed
: 2mm/sec (4RPS)
Load Capacity
Z Axis
(maximum holding
X Axis
g weight at
4mm Pitch
Ball
screw
Model No
Kg
Kg
4mm Pitch
Ball screw
With 1:8 Gear Box
Model No
50
50
50
45
45
45
15
15
15
15
15
15
RCMTS150-100-F
RCMTS150-150-F
RCMTS150-200-F
RCMTS150-300-F
RCMTS150-500-F
RCMTS150-750-F
off condition)
RCMTS150-100-2
RCMTS150-150-2
RCMTS150-200-2
RCMTS150-300-2
RCMTS150-500-2
RCMTS150-750-2
Travel Length
PHYSICS INSTRUMENTS
T
100
150
200
300
500
750
L
330
380
430
480
790
1070
Engraved vernier
scales are provided
translation stages.
Vertical Bracket
VAB-RCMTS150-100
VAB-RCMTS150-150
VAB-RCMTS150-200
VAB-RCMTS150-300
VAB-RCMTS150-500
VAB-RCMTS150-750
Accessories
Horizontal Bracket
HAB-RCMTS-150
Size : 150x150mm
Load Capacity
X Axis
Z Axis
Quality Control
Kg
Kg
90
90
86
85
80
80
70
70
62
60
55
50
We have a state of the art laboratory
for quality control and inspection.
We have established a fail safe
inspection procedure to make sure
of the quality standard of our
products before shipment.
Base Plate
BP-RCMTS150-100
BP-RCMTS150-150
BP-RCMTS150-200
BP-RCMTS150-300
BP-RCMTS150-500
BP-RCMTS150-750
◄
TABLE OF CONTENTS
RCMTS-150 Series
Base plates :
PAGE
194
054
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
RCMTS-200 Series
Load Capacity :Up to 150 kg vertical
OPTOMECHANICS
Engraved vernier
scales are provided
translation stages.
Repeatability
: 0.05mm
Resolution
Speed
: 16mm/sec (4RPS)
Repeatability
: 0.05mm
Resolution
Speed
: 5mm/sec (4RPS)
Kg
Kg
4mm Pitch
Ball screw
With 1:8 Gear Box
Model No
100
100
100
100
95
90
15
15
15
15
15
15
RCMTS200-100-F
RCMTS200-200-F
RCMTS200-200-F
RCMTS200-300-F
RCMTS200-500-F
RCMTS200-750-F
off condition)
RCMTS200-100-2
RCMTS200-200-2
RCMTS200-200-2
RCMTS200-300-2
RCMTS200-500-2
RCMTS200-750-2
Travel Length
T
100
150
200
300
500
750
L
390
440
490
590
670
1120
Vertical Bracket
VAB-RCMTS200-100
VAB-RCMTS200-150
VAB-RCMTS200-200
VAB-RCMTS200-300
VAB-RCMTS200-500
VAB-RCMTS200-750
Accessories
Horizontal Bracket
HAB-RCMTS-150
Size : 150x150mm
Load Capacity
X Axis
Kg
Kg
150
150
150
150
140
135
120
120
120
115
110
105
Base Plate
BP-RCMTS200-100
BP-RCMTS200-200
BP-RCMTS200-200
BP-RCMTS200-300
BP-RCMTS200-500
BP-RCMTS200-750
Z Axis
POSITIONING DEVICES
Load Capacity
Z Axis
(maximum holding
X Axis
weight at
4mm Pitch
Ball
screw
Model No
vertical ones. Horizontally fixed height platforms can
be constructed by combining two angle brackets.
Base plates :
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
UV-VIS-IR OPTICS
Gear Ratio- 1:8
195
055
055
PHYSICS INSTRUMENTS
Drive Details
: 20-50 Micron
: Aluminum Alloy B51S
: Black anodized
: M4 Tapped Holes
: M6 Tap and M4 CBR
: Modular Type - Multi axis
◄
Drive
Construction
Finish
Design
RAILS & CARRIERS
RCMTS-200 series stages have 200 mm width and carriages ( load
bearing moving surface) have 200 mm x 200 mm size. Drive is by ball
screw-stepper motor combination. Re-circulating type linear ways are
used as guides ( two linear ways per stage). These stages are available
up to travel of 750 mm as standard products. More traverse, please
contact us.
Z-axis: In these stages, in vertical configuration, if the load is more than
15 kgs, the carriage may come down under gravity when power to the
motor is switched off. This is when ball screw is directly attached to the
stepper motor. If the load to be lifted is more than 15 kgs, it is advisable
to use our Z axis stages with a gear box (1:6 ratio) in between motor
and ball screw. Though this reduces speed in Z axis, load capacity
increases considerably. Please see the tables and chart below for
details.
HOLMARC
HOLMARC
RESEARCH TOOLS
Carriage Size : 150mm to 150mm
Load Capacity :Up to 125 kg vertical
RAILS & CARRIERS
Carriages (load bearing surface of the stage which moves) of
RCMTS-250 stages have 250 mm x 250 mm size. Standard models
are available for up to 750 mm traverse. There are two linear
guideways for each axis and these are re-circulating type with balls.
Drive is by ball screw-stepper motor combination. Servo motors can
also be made available for specific applications where speed
requirements are not possible with steppers.
Z-axis: In these stages, in vertical configuration, if the load is more
than 15 kgs, the carriage may come down under gravity when
power to the motor is switched off. This is when ball screw is directly
attached to the stepper motor. If the load to be lifted is more than 15
kgs, it is advisable to use our Z axis stages with a gear box (1:6 ratio)
in between motor and ball screw. Though this reduces speed in Z
axis, load capacity increases considerably. Please see the tables
and chart below for details.
OPTOMECHANICS
Straight line Accuracy : 20-100 Micron
Drive : Precision Lead screw
Construction : Aluminium Alloy B51S, Black anodized Finish
Tapped Holes on Carriage : M4 Tapped Holes
Mounting Holes on the base : M6 Tap and M4 CBR
Design : Modular Type -Multi axis
Drive Details
Gear Ratio- 1:8
UV-VIS-IR OPTICS
Load Capacity
Z Axis
(maximum holding
X Axis
weight at
POSITIONING DEVICES
Kg
Kg
4mm Pitch
Ball screw
With 1:8 Gear Box
Model No
100
100
100
100
95
90
90
15
15
15
15
15
15
15
RCMTS250-100-F
RCMTS250-200-F
RCMTS250-250-F
RCMTS250-300-F
RCMTS250-500-F
RCMTS250-750-F
RCMTS250-1000-F
off condition)
RCMTS250-100-2
RCMTS250-200-2
RCMTS250-250-2
RCMTS250-300-2
RCMTS250-500-2
RCMTS250-750-2
RCMTS250-1000-2
Travel Length
PHYSICS INSTRUMENTS
T
100
200
250
300
500
750
1000
L
410
510
560
610
920
1170
1420
Vertical Bracket
VAB-RCMTS250-100
VAB-RCMTS250-200
VAB-RCMTS250-250
VAB-RCMTS250-300
VAB-RCMTS250-500
VAB-RCMTS250-750
VAB-RCMTS250-1000
Accessories
Horizontal Bracket
HAB-RCMTS-250
Size : 250x250mm
Repeatability
: 0.05mm
Resolution
Speed
: 16mm/sec (4RPS)
Repeatability
: 0.05mm
Resolution
Speed
: 5mm/sec (4RPS)
4mm Pitch
Ball
screw
Model No
056
Engraved vernier
scales are provided
translation stages.
Load Capacity
X Axis
Kg
Kg
150
150
150
150
140
135
135
120
120
120
115
110
105
100
Base Plate
BP-RCMTS250-100
BP-RCMTS250-250
BP-RCMTS250-250
BP-RCMTS250-300
BP-RCMTS250-500
BP-RCMTS250-750
BP-RCMTS250-1000
Z Axis
◄
TABLE OF CONTENTS
RCMTS-250 Series
Base plates :
PAGE
196
056
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
XY MOVING PLATFORM
MXYTS series motorized stages are manufactured in five different sizes for
general purpose positioning and measurement applications. The stages are
supplied with or without mounting holes as per requirement. Drive leadscrew
along with motor is mounted by the side of the stage. One end of the lead
screw is attached to a rotary knob for manual adjustments, when ever
required. Limit switches are fixed at both extremes for home and far end
location. Crossed roller based linear guides are used for achieving precision
linear motion. The guide ways are factory preloaded to eliminate play and
wobble. Coefficient of friction is less than 0.003. Standard stages are
constructed in aluminium alloy and finished by black anodizing.
MICRO POSITION CONTROL
& SOFTWARE
OPTOMECHANICS
► Repeatability : 0.002mm
► Precision lead screw
► Base mountable
RAILS & CARRIERS
TABLE OF CONTENTS
RESEARCH TOOLS
>> Applications
► XY moving platforms
► XY dispensing units
► Inspection microscopes
► Induction hardening
Holmarc manufacture control electronics
for all our stages. We have state of the art
electronics and software development lab
for position and motion control products.
Apart from standard products, we can
develop custom solution for driving the
stages.
UV-VIS-IR OPTICS
For manual model
Refer page: 097
Position controller sold
seperately. Please refer
Control electronics & software
Page No: 104
Stages can be fixed with digital readout where
ever required. Custom sizes can be made
available for any of our standard stage designs.
Stages can be manufactured in any material of
choice like mild steel, stainless steel, etc.
POSITIONING DEVICES
Holmarc provides custom services for
integration of stages and position controller
with other instruments and equipments as
well.
057
All dimensions are in “mm”
Carriage Size
150x150
170x170
270x170
270x240
370x240
Travel X&Y
50,50
100,100
200,100
200,170
300,170
Height
65
65
75
75
75
L
150
170
270
270
370
W
150
170
170
240
240
Fore more please contact us
HOLMARC Opto-Mechatronics Pvt. Ltd
Ph.No. 91-484 2540075
Fax: 91-484 2540882
[email protected]
[email protected]
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
197
057
PHYSICS INSTRUMENTS
Model No.
MXYTS150150
MXYTS170170
MXYTS270170
MXYTS270240
MXYTS370240
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
MXYTSW Series XY Stage
RAILS & CARRIERS
MXYTSW Series stages are provided with a rectangular through hole at the center.
In many optical instruments, this hole is used for illumination of object from
underneath. In other cases, these can be made use of as access holes for keeping
other instruments. Drive lead screw along with motor is mounted by the side of the
stage. One end of the lead screw is attached to a rotary knob for manual
adjustments, when ever required. Limit switches are fixed at both extremes for
home and far end location.
Crossed roller based linear guides are used for achieving precision linear motion.
The guide ways are factory preloaded to eliminate play and wobble. Coefficient of
friction is less than 0.003. Standard stages are constructed in aluminium alloy and
OPTOMECHANICS
► Stepper motor driven
► Precision ground lead screw
► Repeatability : 0.002mm
► M6 Mounting Holes
Model No:
MXYTSW175175
MXYTSW225225
MXYTSW325225
MXYTSW325295
MXYTSW425295
Carriage Size
175 x 175
225 x 225
325 x 225
325 x 295
425 x 295
>> Applications
► Inspection microscope
► Dispensing unit
► Automated pipetting system
Apreture Size
75 x 75
125 x 125
225 x 125
225 x 195
325 x 195
Travel X&Y
50,50
100,100
200,100
200,170
300,170
H
65
65
75
75
75
L
175
225
325
325
425
Glass plates are available for
XYTSW series XY translation stages
W
175
225
225
225
225
L1
75
125
225
195
195
Glass Plate
Model
Gl7575
Gl125125
Gl225125
Gl225195
Gl325195
W1
75
125
125
175
175
Size
Compatible Stage
95 x 95
145 x 145
245 x 145
245 x 215
345 x 215
XYTSW175175
XYTSW225225
XYTSW325225
XYTSW325295
XYTSW425295
UV-VIS-IR OPTICS
POSITIONING DEVICES
058
PHYSICS INSTRUMENTS
One of the application of MXYTSW Series motorized stage is
automated pipetting system in which sample tray is connected to the
motorized stage. These XY stages are fitted with a drive mechanism
that provide controlled, precise positioning along X and Y axis. Pre
programmed position control unit allows accurate positioning of
sample compartment below the pipetting system.
Linear encoder for digital readout,
Platforms are available upto to 500x500mm size,
Materials other than aluminium are
also available.
PAGE
198
058
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
RAILS & CARRIERS
Rotational MOTION
How May
We Help You
TM
HOLMARC
POSITIONING DEVICES
UV-VIS-IR OPTICS
OPTOMECHANICS
Holmarc manufactures goniometers and rotation stages in variety of standard designs
for a wide range of applications. Sizes of these stages can range from 50 mm to 500
mm in diameter. Construction material can be aluminium alloy, mild steel, stainless
steel or brass depending on the application. There are motorized and manual stages
to choose from in various designs as you will find out from the coming pages of this
chapter.
OPTO-MECHATRONICS PVT.LTD
Selecting an precision stages & controls
NEW
PHONE
FAX
PHYSICS INSTRUMENTS
KOCHI, KERALA,INDIA
Ph.No. 91-484 2540075
' 91-484 2540075
791-484 2543755
CONTACTS
MAIL
LIVE CHAT
059
HOLMARC's experienced support engineers will be glad to help you
determine which product suits your needs. Call us at +91 484 2540075 or
send us a mail to [email protected] or [email protected].
Point your camera
phone at the QR Code
www.holmarc.com
[email protected]
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
199
059
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Goniometer-Worm Gear Drive
GM Series Goniometers - Single Axis
RAILS & CARRIERS
Goniometers are used to rotate an object or sample about a point in
space. Holmarc's GM series goniometer allows an adjustment of ±10°
around a defined optical axis by means of a precision worm gear drive
and v grooved guide ways. These GM series goniometers are
compatible for assembling multi axis configurations.
Travel: ± 10°
Carriage Sizes : 35x35 mm, 50x50mm & 65x65mm
Drive: Precision worm gear
OPTOMECHANICS
Travel
: ± 10°
Readout
: 1°
Guide way
: Precision ball guideway
Construction
Finish
: Black anodized
Tapped Holes on Carriage : M3/M4/M6 tapped holes
Mounting Holes on the base : M3/M4/M6 CBR
Design
: Modular type
Configuration
: Multi axis configurable
X
UV-VIS-IR OPTICS
X
GM-50-43 or SSGM-50-43
GM-35-37 or SSGM-35-37
POSITIONING DEVICES
Model No.:(Material)
Aluminium
GM-35-37
GM-35-55
GM-50-43
GM-50-63
GM-65-50
GM-65-75
Center Height
X
37
55
43
63
50
75
Load Capacity
Kg
1
1
1
2
6
6
060
X
PHYSICS INSTRUMENTS
Goniometers are used to rotate an object or sample about a point in
GM-65-50 or SSGM-65-50
PAGE
200
060
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
Combi Goniometer-Worm Gear Drive
GM Series Goniometers - Dual Axis
The CGM series Combi-Goniometer is a two axis positioner. It enables
precise positioning along pitch and roll direction with the help of means
of a precision worm gear drive and v grooved guide ways. Ranges in ±
10° around a defined optical point. It provides adjustment around an
axis with defined optical height while having free space around the
adjustment for parts like prisms or other optics
OPTOMECHANICS
CGM-50-63 or SSCGM-50-63
Model No:(Material)
Aluminium
CGM-35-37
CGM-50-43
CGM-65-50
Center Height
X
37
43
50
Load Capacity
Kg
1
2
5
UV-VIS-IR OPTICS
Travel
: ± 10°
Readout
: 1°
Guide way
: Precision ball guideway
Construction
Finish
: Black anodized
Tapped Holes on Carriage : M3/M4/M6 tapped holes
Mounting Holes on the base : M3/M4/M6 CBR
Design
: Modular type
Configuration
: Multi axis configurable
Feature : Common axial point in XY configuration
Travel: ± 10°
Carriage Sizes : 35x35 mm, 50x50mm & 65x65mm
Drive: Precision worm gear
RAILS & CARRIERS
TABLE OF CONTENTS
RESEARCH TOOLS
POSITIONING DEVICES
Fig. Goniometer along with RS-50 Series rotation stage
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
201
061
PHYSICS INSTRUMENTS
061
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Rotation Stages
RAILS & CARRIERS
This RS Series precision rotary stage allows unlimited coarse movement and a limited
+/- 4 degree azimuth at resolutions of 0.1 degree. It is suitable for horizontal and
vertical rotational axes. Preloaded rolling contact bearings are used to minimize
friction and to eliminate play. M6 clearance holes are provided at four corners to
mount the stage directly to breadboards. For mounting to linear stages and other
systems, adapter plates with sufficient tapped holes and C bored holes can be used
Coarse Travel: 360°
Fine Travel : ± 4°
Top Disc Sizes : Diameter 25mm - 150mm
Load Capacity : 45kg vertical
Drive : Micrometer
OPTOMECHANICS
Model No:
Material Aluminum
RS-25
RS-35
RS-50
RS-75
RS-100
RS-125
RS-150
Model No:
Material SS
SS-RS-25
SS-RS-35
SS-RS-50
SS-RS-75
SS-RS-100
SS-RS-125
SS-RS-150
Load Capacity
Kg
1
1
3
8
15
35
45
Readout
Bearing type
Construction
: 0.1°
: Precision double bearing
: Aluminium alloy B51S /
stainless steel
Finish
: Black anodized
Tapped holes on top disc
: M4/M6 tapped holes
Mounting holes on the base : M4/M6 CBR
Design
: Modular
UV-VIS-IR OPTICS
RS-25 or SS-RS-25
RS-35 or SS-RS-35
RS-50 or SS-RS-50
RS-75 or SS-RS-75
POSITIONING DEVICES
062
PHYSICS INSTRUMENTS
RS-100 or SS-RS-100
RS-125 or SS-RS-125
RS-150 or SS-RS-150
PAGE
202
062
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
: 0.1°
: Precision double bearing
: Aluminium alloy B51S /
Stainless steel
Finish
: Black anodized(Al) / Ground finish(SS)
Tapped holes on top disc
: M4/M6 tapped holes
Mounting holes on the base : M4/M6 CBR
Design
: Modular
Stainless Steel
SS-RSC-50
SS-RSC-50T
SS-RSC-75
SS-RSC-75T
SS-RSC-100
SS-RSC-125
SS-RSC-150
Load
Capacity
Bore Type
2
2
5
5
8
25
25
Dia-25mm
M16x1 thread
Dia-30mm
M16x1 thread
Dia-50mm
Dia-75mm
Dia-100mm
UV-VIS-IR OPTICS
Readout
Bearing type
Construction
Model no:(material)
Aluminium
RSC-50
RSC-50T
RSC-75
RSC-75T
RSC-100
RSC-125
RSC-150
RAILS & CARRIERS
Coarse Travel: 360°
Fine Travel : ± 5°
Bore Type : M16x1 thread or 25-100mm through Bore
Top Disc Sizes : 50mm -150mm Dia.
Load Capacity : 25kg vertical
Drive : Micrometer
This RSC Series precision rotary stage allows unlimited coarse movement
and a limited +/- 4 degree azimuth at resolutions of 0.1 degree. It is suitable
for horizontal and vertical rotational axes. Preloaded rolling contact
bearings are used to minimize friction and to eliminate play. M6 clearance
holes are provided at four corners to mount the stage directly to
breadboards. For mounting to linear stages and other systems, adapter
plates with sufficient M6 tapped holes and C’bored holes can be used. The
stage is constructed out of aluminium alloy and finished by black anodizing
.
Through-hole or M16x1 threaded hole in the center allows the stage to be
used in an imaging application that requires illumination from underneath
the sample. Custom mounting patterns are possible for easy integration
with other device
OPTOMECHANICS
Rotation Stage with through hole at the center
TABLE OF CONTENTS
RESEARCH TOOLS
RSC-75 or SS-RSC-75
RSC-50T or SS-RSC-50T
POSITIONING DEVICES
RSC-50 or SS-RSC-50
RSC-75T or SS-RSC-75T
RSC-100 or SS-RSC-100
PHYSICS INSTRUMENTS
063
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
203
063
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Rotation Stages - Continous Rotation
Rotation Stages-Continous Rotation - 3600
WRSC series Rotation Stages
RAILS & CARRIERS
In these rotation stages, a through
hole is provided at the center . This
through hole can be utilized for
mounting components or taking out
cables through the center. These
stages are available in aluminium
alloy and stainless steel
construction. Please refer to table
describing models for details.
WRS-50
WRS-75
WRS-100
WRS-150
WRS series Rotation Stages
In these stages, top rotating surface is plain without any center through
hole. There are tapped holes provided on this top surface for mounting
components and devices. These stages are also available either in
aluminium alloy or stainless steel.
OPTOMECHANICS
WRSC- Series Rotation Stage
►
►
►
►
►
►
M6 tapped holes
Precision worm gear drive
Minimum back lash
Angular resolution-0.1°
360° continous motion
Black anodized finish
UV-VIS-IR OPTICS
POSITIONING DEVICES
WRSC-100
WRSC-150
WRS-200
WRS-300
WRS- Series Rotation Stage
Model No.:(material)
Aluminium
WRS-50
WRS-75
WRS-100
WRS-150
WRS-200
WRS-300
064
PHYSICS INSTRUMENTS
WRSC-200
WRSC-300
WRSC-100
WRSC-150
WRSC-200
WRSC-300
Load
Capacity (kg)
SS
SS-WRS-50
12
SS-WRS-75
25
SS-WRS-100
80
SS-WRS-150
125
SS-WRS-200
150
SS-WRS-300
180
WRSC- Series Rotation Stage
SS-WRSC-100
30
SS-WRSC-150
80
SS-WRSC-200
150
SS-WRSC-300
300
PAGE
204
064
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
MOTORIZED ROTATION STAGES
MGM Series
RAILS & CARRIERS
Goniometer - Motorized
OPTOMECHANICS
Holmarc goniometer’s use rolling contact guides with balls rolling on
precision machined curved 'V' grooves for friction less and stick-slip free
movements. Pre-loading of the ball guides ensure play less positioning and
long term stability . Drive is achieved by a worm and gear mechanism.
Graduations are marked on one side of the stage for measurements and
repeatable positioning. Construction material of the goniometer is chosen as
aluminium alloy for keeping the self weight of the device as minimum as
possible. Black anodized finish is given to make the goniometer optics lab
compatible.
Model No:
Travel
Central Height
Load Capacity
Base Plate
Model No.
MGM-35-55
+/- 50
55
1 kg
BP-MGM-35
63
2 kg
BP-MGM-63
75
6 kg
BP-MGM-75
100
10 kg
MGM-50-63 +/- 7.50
MGM-65-75 +/- 10
0
MGM 90-100 +/- 150
UV-VIS-IR OPTICS
Holmarc makes goniometers with motorized drives as well for custom
applications. Please contact our sales engineers for more details.
BP-MGM-90
POSITIONING DEVICES
ANALYTIC INSTRUMENTS
065
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
205
065
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
MRSC Series
RAILS & CARRIERS
These stages are suitable for applications where positioning needs to be automated.
The drive mechanism consists of worm and gear assembly perfectly matched to
minimize play and back-lash. There is an access hole through the center of the stage
for illumination from underneath or for similar purposes. Radial play is eliminated by
the use of preloaded thrust bearings using balls as rolling elements. Stepper motor is
used as the electrical actuator and is connected to the worm. Shaft of the stepper
motor is connected to a rotating knob as well as for manual adjustments, when ever
required. Top surface of the stage is provided with tapped holes and base with
counter bored holes for mounting. Standard stages are manufactured in aluminium
0
>> Applications
► Scattering photometer
► Probe positioning
OPTOMECHANICS
Model No:
D
W
H
B
MRSC 100
100
150
50
125
30
25
MRSC 150
150
175
50
150
50
30
MRSC 200
200
250
60
200
70
75
MRSC 300
300
350
60
325
90
200
MRSC 500
500
500
80
475
125
300
D1 Load capacity(kg)
► 360 rotatable
► Fine rotation <1 arc min.
► Up to 500 kgs load capacity
► Double bearing design
► Precision worm gears
► M6/M8/M12 C’bored holes
► Aluminium / steel material
► Attractive paint finish
► Pre loaded rolling contact bearings are used to minimize
friction and to eliminate play.
► Driven by precision worm gear assembly.
► Graduated rotary scales are provided for visual reference of
positions.
► Can be fitted to our motorized linear stages for multi axis
configurations.
► Custom stages are constructed out of aluminium, steel and SS
depending on the applications.
► Custom mounting patterns for easy integration with
other machine components.
UV-VIS-IR OPTICS
Ball Base Mounting Platform
This base provides 360 degree
rotation about its axis and swings
90 degree to the side. The device
can be locked at any desired
position.
POSITIONING DEVICES
Scattering Photometer Experiment Setup using MRSC Series rotation stage
MRSC Series Motorized
Rotation Stage
With XY Positioner
066
Application Idea
Vertical Positioning
MRSC series rotation stage can be
assembled along with XY stage. It
helps to position the rotation stage
precisely in X and Y directions.
Vacuum Compatible
Vacuum compatible rotation stages
are available on special request. They
use vacuum compatible grease and
epoxies and are non-anodized. These
rotation stages are being used
successfully in vacuum applications
down to 10-6 Torr
90° Bracket can be used with
aluminium breadboard or optical
table for achieving vertical working
surface.
PAGE
206
066
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
RAILS & CARRIERS
TABLE OF CONTENTS
RESEARCH TOOLS
Miniature vacuum
compatible rotation
stage
MRS Series
MRSC-500
POSITIONING DEVICES
MRSC-300
Vacuum compatible rotation
stages are available for special
applications. These stages are
motor driven, use vacuum
compatible grease and epoxies
and are non-anodized
components. These rotation
stages are being used
successfully in vacuum
applications down to 10-6 Torr.
MRS series motorized rotation stages are designed and manufactured for automated
positioning applications. Worm and gear assembly perfectly matched to minimize play and
back-lash is used as drive mechanism. The top rotating part which plane in this case, is
provided with rotary graduations on the periphery throughout 360 degree.
Radial play is eliminated by the use of preloaded thrust bearings using balls as rolling
elements. Stepper motor is used as the electrical actuator and is connected to the worm. Shaft
of the stepper motor is connected to a rotating knob as well for manual adjustments, when ever
required. Top surface of the stage is provided with tapped holes and base with counter bored
holes for mounting. Standard stages are manufactured in aluminium alloy and finished by black
anodizing. The stage can be manufactured in stainless steel and mild steel as well as with
required finish.
067
>> Applications
► Radar Positioning
► Probe Positioning, etc
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
OPTOMECHANICS
MRSC-200
UV-VIS-IR OPTICS
MRSC-150
207
067
MRSC-100
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
RAILS & CARRIERS
MRS-50
MRS-75
MRS-100
OPTOMECHANICS
MICRO POSITION CONTROL
& SOFTWARE
UV-VIS-IR OPTICS
Fully programmable line of
stepper motor controllers and
motor drivers are available for
use with positioning systems.
Micro position controller and
software are sold separately.
Please refer page 183 for more
information.
MRS-150
0
► 360 rotatable
► M6/M8 Mounting Holes
► M6/M8/M12 CBR holes
► Material: Aluminium / Steel
MRS-200
POSITIONING DEVICES
► Pre loaded rolling contact bearings are used
to minimize friction and to eliminate play.
► Driven by precision worm gear assembly.
► Graduated rotary scales are provided for visual
reference of positions.
068
Load
Degree/
Half Step
Model No:
D
W
H
Capacity(kg)
Rotation
Resolution
MRS 50
50
65
45
25
25
25
MRS 75
75
90
45
30
30
30
MRS100
100 150
50
75
75
75
MRS 150
150 175
50
200
200
200
MRS 200
200 250
60
300
300
300
► Can be fitted to our motorized linear stages for
multi axis configurations.
► Custom stages are constructed out of
aluminium, steel and SS depending on the
application.
► Custom mounting patterns for easy integration
with other machine components.
PAGE
208
068
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
MRSH Series Motorized Heavy Duty Rotation Stages
Radial play is eliminated by the use of preloaded thrust bearings using
balls as rolling elements. Stepper motor is used as the electrical
actuator and is connected to the worm. Shaft of the stepper motor is
connected to a rotating knob as well for manual adjustments, when
ever required. Top surface of the stage is provided with tapped holes
and base with counter bored holes for mounting. Standard stages are
manufactured in aluminium alloy and finished by black anodizing. The
stage can be manufactured in stainless steel and mild steel as well with
the required finish.
RAILS & CARRIERS
These are heavy duty stages which can take vertical loads beyond 200
kg’s. Worm and gear assembly perfectly matched to minimize play and
back-lash is used as drive mechanism. The top rotating part which is
plane in this case, is provided with rotary graduations on the periphery
throughout 360 degree.
► Preloaded rolling contact bearings are used to
minimize friction and to eliminate play.
► Drive by precision worm gear assembly.
► Graduated rotary scales are provided for
visual reference of positions.
► Can be fitted to our motorized linear stages for
multi axis configurations.
► 360 rotatable
► M6/M8/M12 C’bored holes
► Material: Aluminium / Steel
► The stages are constructed out of aluminium, steel
► Radar Positioning
► Probe Positioning
► Sun tracking Radiometer
► Antenna Positioning etc.
To meet the most critical positioning demands, rotary encoder is used.It
converts the angular position of a shaft to digital code, making it an angle
transducer.
OPTOMECHANICS
or SS depending upon the applications.
>> Applications
: Aluminium
: up to 500X500mm.
: up to 300 Kg.
: 10 degree/sec
: 360o
: Stepper Motor
: Closed Loop using rotary encoder.
Other Features include 50 mm grid of M8 tapped holes, Stainless
steel inserts, Black anodized finish.
UV-VIS-IR OPTICS
Specifications
Material
Turn table dimension
Load Capacity
Maximum Speed
Traverse
Actuator
Control Type
Model No:
D
W
H
load Capacity
Degree / Rotation
Resolution Half step
MRSH 300
300
250
60
200
1.80
0.00450
MRSH 400
400
450
80
250
2.40
0.0060
MRSH 500
500
500
80
300
Vacuum Compatible Linear Slides
ñAvailable in special sizes and travels
ñCustom hole pattern on carriage faces
ñBalls / rollers
ñAluminum / stainless steel
ñMicro step drives
ñHigh accuracies
For more details please contact us
' 91-484 2540075 791-484 2540882
www.holmarc.com
[email protected]
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
209
069
POSITIONING DEVICES
0.005
1/8,1/16,1/256
0
069
2
0
Available micro stepping
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
RAILS & CARRIERS
OPTOMECHANICS
MRSH-300
MRSH-400
MRSH-500
Precision Motion Control System
Holmarc’s extensive line of computer controlled motorized linear slides, miniature linear actuators, motorized rotary stages, motorized mirror
mounts, goniometers and other devices, make automating sub-micron positioning applications quick, easy, and affordable.
UV-VIS-IR OPTICS
Ì
]
POSITIONING DEVICES
Our linear motion slides are time tested products widely used for automation in quality control as well as manufacturing. There are hundreds of
models of linear motion assemblies to choose from. We have micrometer and lead screw driven stages in single and multi-axes configurations in
modular as well as standalone designs. These are specifically designed and manufactured for optics and laser related positioning. Measuring
stages manufactured by us are OEM devices being used by manufacturers of optical measuring devices like profile projectors and tool makers
microscopes.
3 Axis Table
Size
: 300X300mm
Load Capacity: 200Kg
X Axis
Travel
:100mm
Drive
: Lead screw
Y Axis
Travel
:100mm
Drive
: Lead screw
Z Axis
Travel
: 75mm
Drive
: Worm gear
070
For more details contact at [email protected]
PAGE
210
070
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
LONG TRAVEL POSITIONING STAGES
Multi Axes Stage (Linear & Rotary Configuration)
XYZ Theta Stage ( Model : HO-MXYZR-500)
In this model, theta stage is fixed to carriage of the Z stage with an bracket so that top surface of the theta
stage is horizontal. As shown in the photograph, one side of the theta stage is obstructed by Z axis. All
linear stages are given bellows protection
Specifications
Travel X
Travel Y
Travel Z
Rotation
Load Capacity
Construction
: 500mm
: 500mm
: 500mm
: 3600 Continuous rotation
: 25kg
XY Theta Stage ( Model : HO-MXYR-300)
As evident from the photograph, theta stage is placed on top of X- Y stages.
All three axes are motorized, still hand knobs are given behind each motor
for manual adjustments if required. X and Y stages have bellows protection.
Top surface of theta stage is provided with tapped holes for mounting.
OPTOMECHANICS
RAILS & CARRIERS
Most of the linear and rotary stages manufactured by Holmarc are modular in design that these can be
assembled with suitable angle brackets and adapter plates to obtain multi-axes stages. Three of the linear
and rotary combination stages are described in this section.
Specifications
: 300mm
: 300mm
: 250kg
: Black anodized
UV-VIS-IR OPTICS
Travel X
Travel Y
Rotation
Load Capacity
Construction
Finish
XYZ Theta Stage ( Model : HO-MXYZR-100)
In this configuration, theta stage is fixed on top of Z stage with
the help of an L bracket. This configuration helps to mount
components on top of the theta stage without obstructions from
any sides. All four axes are motorized with stepper.
Specifications
: 50mm
: 50mm
: 50mm
: 150mm
: 25kg
: Black anodized
POSITIONING DEVICES
Travel X
Travel Y
Travel z
Rotation
Top Disc Diameter
Load Capacity
Construction
Finish
071
In this design, a long travel z stage is fixed on top of 250mm travel
XY stage. 200x200mm area angle bracket is placed on the z stage
for mounting components. All four axes are motorized with
stepper.
Travel X
Travel Y
Travel Z
Load Capacity
Construction
Finish
: 250mm
: 250mm
: 800mm
: 25kg
: Aluminium alloy
: Black anodized
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
211
071
XYZ Theta Stage ( Model : HO-MXYZ-100)
Specifications
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
RAILS & CARRIERS
OPTOMECHANICS
UV-VIS-IR OPTICS
POSITIONING DEVICES
072
THETA 2 THETA STAGE
Holmarc's theta 2 theta stage consists of two rotation stages arranged in such a
way that axis of rotation for both the stages are same. Both stages have
preloaded ball bearing guides for wobble free rotation and positioning. 360°
limitless movement is possible for inner and outer stages. Holmarc
manufactures these stages with manual and as well as motorized drive
configurations. Rotary graduations are provided in 1°/ 2° with appropriate vernier
graduations depending on the size of the stage. For motorized rotation stage,
worm and gear is our standard drive mechanism. Surfaces of both stages are
provided with M6 tapped holes for mounting components and sub-assemblies.
Holmarc manufactures custom theta 2 theta stages to suit specific applications
as well.
This robotic positioner has two rotary axes (theta X and theta Z) and two linear axes (X and Y ), all driven by stepper/ BLDC servo motors. The base
stage is X axis stage with 500 mm traverse. The theta- X rotation stage is fixed to the carriage of the X stage. Y axis ( second linear stage) having a
traverse of 300 mm is fixed to the top of the X-theta rotation stage. Vertical bracket is fixed to the carriage of Y axis. Theta Z stage is fixed to the top of the
angle bracket. Antenna holder is fixed to the theta- Z stage. Both theta x and theta Z stages have 360 degree rotation and 1 degree graduation for
visual reference. Construction material is aluminium alloy for clean room compatibility and for keeping the self weight of the stage as minimum as
possible.
MULTI AXIS POSITIONING STAGE
Gantri Design Stage
Z Axis
Y Axis
In gantri configuration, Z axis which is fixed to Y axis moves over a fixed
platform/ surface. Length and width of this platform covered by Z movement
are limited to traverses in X and Y axes. Holmarc manufactures standard and
custom stages in gantry configurations. Driver motors can be either stepper,
BLDC or AC servo depending on the application. Holmarc provides control
hardware and software for gantry stages with or without linear and circular
interpolations. Standard stages are manufactured in aluminium alloy which is
well suited for clean room environment. For rugged applications, construction
material can be steel as well. Re-circulating ball bearing guides are used for X
and Y axes. For Z axes, guideways can be either re-circulating or nonrecirculating depending on the traverse and load conditions.
Model No:
GTNDT 100
GTNDT 200
GTNDT 300
GTNDT 500
GTNDT 500-1000
GTNDT 500-1200
GTNDT 800-1500
X
100
200
300
500
1000
1200
1500
Y
100
200
300
500
500
600
750
X Axis
Z
25
50
75
100
200
200
200
Cartesian Design Stage
In Cartesian configuration, Y axis is fixed to the carriage of X axis and the Z axis is
fixed to the carriage of Y axis. The stage is fixed to a suitable base structure
depending on the application. As in the case of our standard motorized stages,
drive motors can be stepper, BLDC or AC servo. Holmarc manufactures control
electronics and software to go with these stages which can be standard as well
as custom.
Customization with respect to size of the stages, traverse, load capacity, drive
motor selection, ball screw pitch and speed, etc are offered by holmarc at the
price of standard products. Our customers are welcome to discuss application
needs with our engineers.
PAGE
212
072
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
RADIOGRAPHY MULTI-AXIS MANIPULATOR
Radiography (Conventional, Digital & CT) Multi-axis Manipulator
MODEL : HO-RGMAM-600R
Automated positioning and movement systems (manipulators) enable
quality radiography images with minimum number of exposures.
Holmarc manufactures six axes manipulators for X-ray & CT
applications as standard products. The system is equipped with six
motorized axis and two/three manual stages. On one of the arms X-ray
source (100 kgs approx.) cans mounted while flat panel with lead mask
(200 kgs approx.) can be mounted on the other arm. Both these arms
have X-Z-movement (300 m) with an accuracy of 50 m, with an option to
have two more additional motorized axes. At the centre of these two
arms, the sample stage is mounted
with motorized X,Y, Z and
(rotation) stages. The manipulator makes the alignment of the source,
detector and sample easy and precise. The precision (rotation) of
sample and automatically acquired radiography images for each is
used to create Computed tomogram of objects.
Additional options such as motorized shutters, mounting of additional
Holmarc's Radiography manipulators provide the
customers:
Remote operation of the X-ray or CT system with reduced
operator intervention
OPTOMECHANICS
RAILS & CARRIERS
Conventional and digital radiography techniques have been widely
used by industries for routine and in-service inspection for non
destructive (NDT).
Fast, precise and efficient positioning of samples, source
and detector.
Easy alignment
Quality X-ray images with minimum numbers of exposures
Faster CT with reduced artifacts
UV-VIS-IR OPTICS
Lower cost and easy maintenance
Source Arm
Vertical height adjustment : 600mm
Positioning accuracy
: 1mm
Drive : Ball screw with manual gear box
Object Arm
: XYZ theta
: 0.05mm
: 600mm
: 300mm
: 600mm
: 360 degree
: 0.1degree
: all axis motorized
: 250x600mm
: self centering chuck
POSITIONING DEVICES
Number of axis
X stage travel
Y Stage travel
Z stage travel
Theta stage travel
Accuracy
Drive
Maximum object size
Object held by
073
Detector Arm
Vertcal height adjustment
: 600mm
: 1mm
Drive: ball screw with manual gear box
Linear axis travel
: 600mm
: 0.05mm
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
213
073
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
Object Manipulator
RAILS & CARRIERS
Holmarc manufactures multi-axes linear and rotary stages for
manipulating objects for NDT and other applications. Two standard
models are described in this section. Both the models have four axes of
freedom, three linear and one rotary. There are hand knobs fitted
behind the motors for manual adjustments when ever required.
Though fitted with stepper motors in standard models, bldc motors can
as well be supplied along with rotary or linear encoder depending on
the application needs.
Motorized X,Y,Z & q Stage
Motorized X,Y,Z & q Stage
MODEL : HO-RGMAM-OM3AR
X Travel
Y Travel
Z Travel
Theta travel
Maximum offset size
Object locking mechanism
: 100 mm
: 100 mm
: 100 mm
: 360°
:0.05 mm
: 100x100x100 mm
: Self centering jaw
MODEL : HO-RGMAM-COM3AR
OPTOMECHANICS
X Travel
Y Travel
Z Travel
Theta Travel
Positioning Accuracy
Maximum Offset size
Object Locking Mechanism
: 25 mm
: 25 mm
: 25 mm
: 360°
: 0.05 mm
: 100x100x100 mm
: Self centering Jaw
ANTENNA POSITIONING SYSTEM
Azimuth Positioner
MODEL : HO-APS-500
UV-VIS-IR OPTICS
Holmarcs azimuth antenna positioner consists of horizontal heavy duty
rotation stage driven by stepper/servo motor mounted horizontally. Antenna
can be positioned at 1 meter height from the surface of the positioner using
antenna mast made in wood or plastic. We provide suitable antenna mast
along with the system as per customer specifications. There are two standard
models having 300 mm diameter (medium duty) and 500 mm diameter (
heavy duty) mounting area. Construction material is aluminium alloy for
medium duty positioner and steel for heavy duty positioner. Stepper motor or
BLDC servo motor is used as actuator. Manual positioning facility is provided
by a hand wheel fixed to worm shaft. Rotary graduations in degree with one
degree resolution is marked on the rotating surface for visual reference.
Holmarc manufactures positioning systems for far field and near field
measurements for microwave antennas in following three models:
POSITIONING DEVICES
074
1.
2.
3.
Azimuth Antenna Positioner
Theta X and Theta Z (two axis) positioner
Four axis robotic positioner
For all these three models, we provide motion control hardware and software.
Our engineering services are available for integrating the system with data
acquisition hardware as well.
Travel range
Load capacity
Accuracy
Speed
Antenna mast material
Height
Antenna clamp
Finish
: 360° continuous
: 350 kg
: 0.1 Degree
: 8 Degree/sec
: Wood, delrin etc.
: 1 meter
: Jaw adjustable clamp
: Black painted
In this model, two rotary positioners are arranged perpendicular to
each other. One rotation stage is in the horizontal plane (theta X) as in
the azimuth positioner and the second rotary stage is arranged in
vertical plane(theta Z). Antenna holding clamp is fixed to theta Z. Both
stages are driven either by stepper motor or bldc servo motor. The
positioner is constructed in aluminium alloy for clean room
compatibility. Rotary graduations are provided for both theta X and
theta Z stages. Manual positioning is possible by a hand wheel fixed
to the worm shaft.
PAGE
214
074
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
HOLMARC
HOLMARC
TABLE OF CONTENTS
RESEARCH TOOLS
MODEL : HO-APS-300XYR2
X,THETA-X,Y & THETA – Z STAGE
Travel range
: X-500mm,Theta-X: 360°
Y-300mm ,Theta-Z: 360°
RAILS & CARRIERS
Load capacity : Upto 25 Kg
MODEL : HO-APS-300R2
THETA X AND THETA Z CONFIGURATION
Travel range : Theta X - 360° / Theta y - ±90°
Load capacity : Upto 25 Kg
CRYOSTAT POSITIONERS
When cryostats with optical windows need to be mounted and positioned,
Holmarc's cryostat positioners can be considered. These XYZ three axis
positioners are made for smooth and precise movements with heavy loads.
Rolling contact bearings are used for all the three axis for play less and wobble
free movements and positioning with rigidity and stability. A bracket having
mounting holes for cryostat can be fixed to the Z axis as shown in the figure. Zaxis is driven by worm gear assembly for effortless vertical positioning.
OPTOMECHANICS
MODEL : HO-CRYO-50
These positioners are available in motorized and manual version.
UV-VIS-IR OPTICS
: 50 mm
: 50 mm
: 50 mm
: 0.01 mm
POSITIONING DEVICES
X travel
Y travel
Z travel
075
PAGE
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882
215
075
HOLMARC
HOLMARC
RESEARCH TOOLS
TABLE OF CONTENTS
MICROSCOPE TRANSLATION STAGES
XY Sample Measuring Stage
RAILS & CARRIERS
Holmarc manufactures precision XY stages for microscopes of various
makes as per custom specifications. These stages have coarse and fine
travel mechanisms. Coarse movement with resolution of 0.01 mm is achieved
by micrometer heads whereas fine travel with resolution of 0.0003 is achieved
by combination of micrometer and lever mechanism. Sample size is generally
25 mm x 75 mm ( suitable for standard glass slides).Both X and Y stages have
ball bearing guideways for friction less and stick slip free movements. The
stage is constructed in aluminium alloy and given a black anodized, reflection
free finish.
Manual Sample Stage
MODEL : XY-MF-25
OPTOMECHANICS
Sample Size
: 75mmx25mm
Travel Range
: 10mm Continuous
Coarse travel resolution : 10 Micrometer
Fine travel resolution
: 0.1 Micrometer
Suitable for inverted microscope
Motorized XY Sample Stage
MODEL : XY-MF-150
UV-VIS-IR OPTICS
Sample Size
: 60mmx50mm
Travel
: 150mm (X) & 50mm (Y)
Sample Size
: 60mmx50mm Max.
Drive
: Motorized
Resolution
: 10 Micrometer
Suitable for inverted microscope
XY Manual Stage for Microscope
HOLM
ARC
MODEL : XY-MIC-25
POSITIONING DEVICES
This XY stage is used to move and position the entire microscope
assembly in X and Y directions. The microscope can be mounted on
the top surface of the stage by making use of the tapped holes
provided. Drive is by standard micrometer heads with 0.01 mm
resolution and 25 mm traverse. Smooth movements by micrometers
are possible even under heavy loads.This is achieved by to friction free
ball bearing guideways used for the stage. Side locks are provided for
both axes to avoid accidental movements of the microscope and to
ensure added stability once positioned.
C
HOLMAR
INSPECTION & IMAGING APPLICATION
076
The GTSNDT and SGTS series can be custom configured with
cameras and video microscopes having automated focusing and
motorized zoom. A wide array of lighting options are also available
including coaxial, bottom and angled illuminators with variable
intensity and uniform light distribution. The large number of options
available allows the unit to be easily configured for a wide variety of
image acquisition, inspection, 3D positioning and profiling
applications.
Ph.No. 91-484 2540075
Fax: 91-484 2540882
[email protected]
PAGE
216
076
VISIT US @
www.holmarc.com
0
Ph: 91-484-2540075
Fax: 91-484-2540882

Positioning Devices - Holmarc Opto

Transcription

Similar documents

E236N Tool PreSetter

http://openstudy.com/study#/updates/5390b2e0e4b0ca71e7353153

bis tristar - LUCKINSlive

MAMAC SYSTEMS® Convinced that all temp sensors are same?

click - Ironworkers, Punching Machines and Automated Steel

Oil States Houma Machine Shop

Pulse newsletter

Wendy`s Store Decor Hanging Instructions

Day 31

surfaces - Department of Music