PS-670 6 Volt 7.0 AH
Transcription
PS-670 6 Volt 7.0 AH
PS-670 6 Volt 7.0 AH Features • Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845 Terminals Performance Specifications (mm) Nominal Voltage ...........................................................................6 volts (3 cells) 3.2 • F1 - Quick disconnect tabs, 0.187” x 0.032”Mate with AMP. INC. FASTON “187” series Nominal Capacity 4.75 6.35 0.8 20-hr. (350mA to 5.25 volts) ........................................................... 7.00 AH 10-hr. (630mA to 5.25 volts) .......................................................... 6.30 AH 5-hr. (1.19A to 5.10 volts) ............................................................ 5.95 AH 1-hr. (4.34A to 4.50 volts) ............................................................ 4.34 AH 15-min. (13.5A to 4.50 volts) .............................................................. 3.38 AH Physical Dimensions: in (mm) Approximate Weight ........................................................... 2.42 lbs. (1.10 kg) Energy Density (20-hr. rate) ................................ 1.42 W-h/in3 (86.88 W-h/l) Specific Energy (20-hr. rate) .............................. 17.36 W-h/lb (38.26 W-h/kg) W Internal Resistance (approx.) ...................................................... 15 milliohms Max Discharge Current (7 Min.) ............................................... 21.0 amperes Max Short-Duration Discharge Current (10 Sec.) .................. 70.0 amperes Shelf Life (% of nominal capacity at 68°F (20°C)) Sealed Rechargeable Battery HT H 6 Volt 7.0 Amp. Hr. M UST BE R YCL ED Pb EC ® MH20845 TTERY BA MODEL PS-670 NONSPILLABLE L 1 Month ...................................................................................................... 97% 3 Months ..................................................................................................... 91% 6 Months .................................................................................................... 83% Operating Temperature Range Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C) Discharge ....................................................... -40°F (-40°C) to 140°F (60°C) L: 5.95 (151) W: 1.34 (34) H: 3.70 (94) HT: 3.94 (100) Case ...................................................................................................... ABS Plastic Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Power-Sonic Chargers .................................................PSC-61000A, 61000A-C To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice. www.powersonic.ca PS-670 6 Volt 7.0 AH ® Discharge Characteristics 100 Charging is not necessary unless 100% of capacity is required. 80 Charging before use is necessary to help recover full capacity. 5oC (41oF) 60 o 30 C o (86 F) 40oC (104oF) 40 0 7.0 0 2 4 6 8 10 Charge may fail to restore full capacity. Do not let batteries reach this state. 20oC (68oF) 12 14 16 18 20 o 6.0 5.5 5.0 4.5 2.4 12 24 36 48 1 2 Discharge Time 4 6 8 10 20 4 0 h Life Characteristics in Stand-By Use 5 Retention Capacity (%) h 6 min 20 15 10 Discharge Time 7.0 14 1.2 Discharge Time vs. Discharge Current 0.70 0.35 1.4 3.5 Final Voltage 4.0 Standing Period (Months) o Ambient Temperature 20 C (68 F) 6.5 Terminal Voltage (V) Capacity Retention Ratio (%) Shelf Life & Storage Final Voltage 5.25V 2 5.10V 1 4.80V min 30 4.50V 10 5 o 4.05V 0.35 0.70 1.4 3.5 7.0 80 60 20 0 o Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation. Chargers Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models. 1 2 3 4 Life Characteristics in Cyclic Use 120 Retention Capacity (%) Discharge Current (A) “Float” or “Stand-By” Service: Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. 0 Years 14 Cycle Applications: Limit initial current to 2.1A. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35 volts until current drops to under 70mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage. Float Charging Voltage 2.25 - 2.30 V/Cell 40 40 C (104 F) o o 20 C (68 F) o o 0 C (32 F) Charging Ambient Temperature 20˚C (68˚F) 100 100 80 60 Discharge Depth 100% Discharge Depth 50% Discharge Depth 30% 40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF) 20 0 0 200 400 600 800 1000 1200 Number of Cycles www.power-sonic.ca SUPPORT TECHNIQUE 5640 Avenue Louis Hebert Montréal, Québec H2G 2E8 Pour toute information Tel: + 1-888-896-1717 Fax: +(514) 904-0486 [email protected]
Similar documents
PS-1212 12 Volt 1.4 AH - Power
Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Tran...
More informationPS-12120 12 Volt 12.0 AH - Power
Power-Sonic Chargers..............................PSC-122000A, 122000A-C
More informationPDC-12350 - Power
Energy Density (20-hr. rate) ................................... 1.56 W-h/in3 (95.13 W-h/l) Specific Energy (20-hr. rate) . ............................ 16.03 W-h/lb (35.35 W-h/kg)
More information