Diastema Closure Webinar

Comments

Transcription

Diastema Closure Webinar
Dr. Bud Mopper
Diastema Closure Webinar
Step by
Step
Step 1– Clean
1
Prophy Paste
2
FlexiDiamond Strip
Step 2 – Measure
1
Measure the width of the two centrals
and divide by 2
2
Analyze the inclination
of the teeth and plan
Accordingly.
Step 3 – Take the shade
1
Always take the shade against a moist tooth
that has been properly cleaned.
Renamel
Restorative
System
Microfills
Nanofills
Hybrids
Opaques
Match each other and the
Vita Classic Shade Guide
to make shade selection
easy and predictable
Step 4 – Etch
1
Protect adjacent teeth
2
Leave etch for 30-40 seconds
3
Rinse thoroughly
Step 5 – Bonding Adhesive
1
If you are on Enamel:
- Unfilled Resin
)
If you are also on Dentin:
- Enamel/Dental Primer
(Cosmedent Complete Unfilled Resin)
2
(Cosmedent Complete Primer/Unfilled Resin)
Polymerize for 20 seconds.
)
Step 6 – Renamel Microfill
1
Roll Renamel Microfill
into a convenience form
2
Place microfill on the
labial surface with 8A
placement instrument
3
Sculpt the material and
CONVENIENCE FORM
Roll composite using your
finger tips or on
Cosmedent’s ResinKeeper
light cure for 20 seconds.
4
Add Renamel Microfill or Renamel Nano
into the lingual void and polymerize the
entire restoration for 60 seconds.
Step 7– Measure
1
Make sure the tooth you restored is half of
the total distance measured on step 2.
Step 8 – Finish and Polish
1
On the facial surface, start with the ET 9 Bur
2
Go through Cosmedent’s
Mini Flexidisc System:
- Corse (sand)
- Medium (blue)
- Fine (yellow)
- SuperFine (pink)
Apply pressure and flex the disc (7000-1500RPM)
3
Polish the interproximal surface:
- FlexiDiamond Strip
- Fine/SuperFine FlexiStrip
Step 9 – Adjacent Tooth
1
Follow Steps 4 to 8 for the adjacent tooth
Step 10 – Torquing
1
Place Cosmedent’s 8A Instrument between
the teeth and roll your fingers to cause
separation.
Step 11 – Refine the margins
1
Start with the 8392-016 bur (Brasseler)
Step 12 – Enamelize
1
To enhance the final
polish of the restoration
apply a small amount of
Enamelize polishing paste
directly on the teeth and polish using
Cosmedent’s FlexiBuff
For more information on Cosmedent products go to www.cosmedent.com
or call 1.800.621.6729
from my favorite cookbook
Products used in this handout
Step 5 - Bonding Adhesive
Step 8 - Finish and Polish
 Cosmedent Complete
 FlexiDisc System
 FlexiStrips
FlexiDiamond Strip
Step 6 - Renamel Microfill
 Renamel Microfill
 8A Instrument (Place & Sculpt) Step 12 - Enamellize
 IPCL and IPCT Instrument
 Enamelize
(Sculpt and Definition)
 FlexiBuff
IPCL (Sculpt)of firm tofu, drained
shredded mozzarella cheese