ironhead xl - GUTSCHROME

Transcription

IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
0501-0074
CARBURETORS
& AIR FILTERS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
RIGID FRAMES
•30° rake and 0° stretch
•Constructed of 11/4” DOM steel tubing with 11/2” backbones
•Frames are welded using both TIG and MIG processes and accept
67-85 XL Ironhead engines
•Stock frame features a blank backbone (no tank mounts) and requires
a custom seat
•Accepts OEM neck post cups and 1” stem bearings
•Mid-control mounts; no forward control mounts
•3/4” axle kit included with PART #0501-0074 frame for 180 rear tire only
•Made in the U.S.A.
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
OIL TANKS
•Custom deep drawn tanks are hand-crafted from 16-gauge steel and feature an integral
battery box sized for XL-style batteries
•Winged and round tanks fit both Kraft-Tech XL-style frames using PART #0710-0124 bracket
(sold separately); will not fit stock frames without modification
•Included installation grommets for a top-mounted custom look and clean mounting
•Center fill (cap included) with a 3.5 qt. capacity
•Offer better circulation and cooling and feature gap-concealing wings
•Threaded NPT 1/8” pipe fittings
•Available in raw, ready-to-paint finish
•Chrome rear oil tank bracket fits both Kraft-Tech XL-style frames and is to be used with
winged and round Kraft-Tech oil tanks
PART #
DESCRIPTION
SUG. RETAIL
RIGID FRAMES
0501-0073
0501-00741
For 130/140 rear tire
For 180 rear tire
$832.95
1,027.95
319.95
3/ 4”
•These threaded, coped steel bungs are
or 1” diameter
and are drilled and tapped all the way through with your
5
3
choice of /16”-18 or /8”-16 thread
•Coped for a perfect fit on 1” tubing, tack in place then
weld it up, mounts are finished in minutes
•3/4” bungs sold in 4-packs; 1” diameter bungs sold
in 2-packs
3/4”
0710-0123
0710-0124
OIL TANKS,
FILTERS &
GAS TANKS
SUG. RETAIL
DESCRIPTION
5/16”-18
x 1/2”
5/16”-18 x 1”
3/8”-16 x 1/2”
3/8”-16 x 1”
3/8”-16 x 11/2”
1 3/4”
PART #
0502-0446
0502-0460
DESCRIPTION
SUG. RETAIL
1” DIAMETER
0502-0460
0502-0457
0502-0451
5/16”-18
x 1/2”
3/8”-16 x 1/2”
3/8”-16 x 1”
$382.95
Chrome rear oil tank bracket
$14.95
14.95
15.95
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
FLOORBOARDS
& PEGS
BLIND THREADED
STEEL BUNGS
•These hat-shaped, blind-threaded
mild steel bungs are perfect for
making gas tank and oil tank
mounts, or for creating a mounting
point in any fluid-filled vessel
•1” long overall
•5/16”-18 or 3/8”-16 threads
•Sold in 4-packs
PART #
0502-0445
0502-0447
ALL PART NUMBERS IN BLUE ARE NEW FOR 2014.
DASHES
& GAUGES
29.95
axle kit included
SUG. RETAIL
$22.95
24.95
22.95
24.95
25.95
Round oil tank w/ built-in battery boxes
OIL TANK BRACKET
DIAMETER
0502-0466
0502-0462
0502-0464
0502-0463
0502-0446
BRAKES
DESCRIPTION
0710-0124
Winged oil tank
COPED THREADED STEEL BUNGS
PART #
0710-0123
OIL TANKS (CONT)
OIL TANKS
0710-0122
PART #
CABLES
0710-0122
DESCRIPTION
5/16”-18
3/8”-16
HARDWARE
0502-0445
GENERAL
SUG. RETAIL
$21.95
21.95
683
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
FULL RADIUS THREADED
STEEL BUNGS
0502-0453
THREADED STEEL BUNGS
•Threaded steel bungs are great for mounts of all sorts
•Available in 1/4”-20 x 1” long, 5/16”-18 in 1/2” or 1” length,
and in 3/18”-16 in 1/2”, 1”, or 11/2” long
•These are drilled and tapped all the way through
CARBURETORS •Sold in 4-packs
& AIR FILTERS •Made in the U.S.A.
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
0502‑0465
0502‑0456
0502‑0453
DESCRIPTION
1/4”-20 x 1”
5/16”-18 x 1/2”
5/16”-18 x 1”
SUG.
RETAIL
$18.95
17.95
18.95
PART #
0502‑0455
0502‑0448
0502‑0454
SUG.
DESCRIPTION
RETAIL
3/8”-16 x 1/2”
$17.95
3/8”-16 x 1” (4-pk,)
18.95
3/8”-16 x 11/2”
18.95
•These are great as they allow for very clean
mounting, as the head of a standard Allen
bolt will fit flush inside
•The outside measurements are 3/4” diameter
and 3/4” long
•Available for 5/16” or 3/8” Allen bolts
•Sold in 4-packs
DESCRIPTION
For 5/16” Allens
For 3/8” Allens
0502‑0443
3/8”-16
UNIVERSAL MOUNTING TABS
0502-0450
SUG. RETAIL
$17.95
17.95
•Save time and aggravation with these
1/8” thick mild steel tabs
•Perfect for mounts of all sorts
•Sold in 4-packs
PART #
0502‑0471
0502‑0474
0502‑0475
•Sold each
DESCRIPTION
For 54-81 XL; repl. OEM #47511-52
SUG. RETAIL
$30.95
PART #
1302‑0297
1302‑0296
1302-0296
SUG. RETAIL
$19.95
19.95
DESCRIPTION
For 52-81 XL; repl. OEM #47519-52
SUG. RETAIL
$10.95
1302-0298
SWINGARM
BEARING NUTS
SWINGARM
BEARING
DUST
SHIELDS
•Raw finish
•Sold each
PART #
1302‑0299
1302‑0298
1302‑0300
DESCRIPTION
For L74-81 XL left side; repl. OEM #47514-74
For 52-E74 XL left side; repl OEM #47514-52
For 52-E74 XL right side; repl OEM #47515-52
SUG. RETAIL
$22.95
22.95
23.95
•Sold in pairs
PART #
1302‑0295
0502-0196
FLOORBOARDS SWINGARM BEARINGS
•Sold as a set or individually
& PEGS
684
SUG. RETAIL
$13.95
13.95
13.95
DESCRIPTION
For E74-81 XL; repl. OEM #47512-74
For 53-L74 XL; repl. OEM #47512-52
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
GENERAL
0502-0474
DESCRIPTION
1.5” wide x 1.25” tall, .25” hole
1” wide x 3.5” tall, .25” hole
1.5” wide x 1.25” tall, .25” hole
•Zinc-plated finish
•Sold each
SWINGARM PIVOT BOLT
BRAKES
HARDWARE
SUG. RETAIL
$18.95
18.95
5/16”-18
SWINGARM PIVOT
BOLT NUTS
PART #
1302‑0294
DASHES
& GAUGES
DESCRIPTION
0502-0452
0502-0471
HANDLEBARS,
CONTROLS &
MIRRORS
OIL TANKS,
FILTERS &
GAS TANKS
PART #
0502‑0452
0502‑0449
COUNTERBORE STEEL
BUNGS FOR ALLEN HEAD BOLTS
ELECTRICAL PART #
& LIGHTING 0502‑0450
CABLES
•These full radius steel bungs are
1” long x 3/4” diameter
•These are a great bung for blind threaded items
like fender mounts or struts or anything else
you can think of
•Available in 5/16”-18 or 3/8”-16 thread
•Sold in 4-packs
AND RACES
PART #
DESCRIPTION
0502‑0194 Right bearing and race for 82-85 XL;
repl. OEM #47082-81 (set)
0502-0194
SUG. RETAIL
$7.95
SWINGARM BEARING
NUT LOCK TABS
SUG. RETAIL
$12.95
INNER BEARING
SWINGARM SPACER
•Sold in 10-pack
PART #
1302‑0251
PART #
DESCRIPTION
0502‑0196 Bearing and race for L74-81 XL, 77-78 XLCR; repl.
OEM #47521-74 (ea.); will also fit earlier models
that have been updated w/ bearing kit #47550-74
•Sold in pairs
DESCRIPTION
For 52-81 XL; repl. OEM #47525-52
SUG. RETAIL
$1.95 (ea.)
PART #
1302‑0302
DESCRIPTION
For 52-81 XL; repl. OEM #47518-52
SUG. RETAIL
$10.95
IRONHEAD XL
0510‑0065
WELD-ON KICKSTAND MOUNT
PART #
0510‑0196
DESCRIPTION
Accepts 52‑84 XL‑style
kickstand
0510‑0063
CHROME KICKSTANDS
•CNC machined from forged steel
•Raw finish for ease of welding
•For use on 11/8” diameter frame tubes
SUG. RETAIL
$64.95
DS‑233679
SEATS &
SISSY BARS
•High‑strength steel kickstands
with a brilliant chrome finish
•Replace OEM kickstands perfectly
•Overstock kickstand lengths are for bikes with longer
suspension than stock
•Understock kickstands are for bikes with lowered suspension
PART #
EXHAUST
DESCRIPTION
SUG. RETAIL
FOR 85 XL
DS‑2400011
•Spring is measured from
hook to hook
•Sold each
DS‑240330
SUG.
RETAIL
DESCRIPTION
For L84‑85 XL; repl.
OEM #41836‑84 (3.9”)
For 57‑E84 XL; repl.
OEM #50011‑30 (3.4”)
DS‑240330
$4.95
4.95
Stock length (91/2” L)
Flat bottom, stock length (91/2” L)
1” over stock length
1” under stock length
0510‑0064
DS‑2400492
0510‑0065
0510‑0063
1
2
PART #
2401‑0516
PART #
DS‑222964
DESCRIPTION
For 57‑84 XL
SUG. RETAIL
$5.95
•PART #22‑1032 neck post bearing and race complete
replacement kit (includes two bearings, two races
and two dust seals)
•Neck post bearing/race set and neck post bearing
also available individually
SUG
DESCRIPTION
RETAIL
PART #
DESCRIPTION
FOR 82‑85 XL (CONT)
0410‑0090
0410‑0091
Bearing and race set
Neck post bearing only;
repl. OEM #48300‑60 (ea.)
FORK STEM DUST COVERS
$196.95
CABLES
SUG. RETAIL
$10.95
PART #
DS‑222792
DS‑222700
DESCRIPTION
SUG.
RETAIL
DS‑222700
DS‑222855
$10.95
DS‑222860
6.95
DS‑222860
Bearing and race set
$14.95
Neck post bearing only;
repl. OEM #48300‑60 (ea.)
10.95
Race only; repl. OEM #48315‑60 (ea.)
5.95
DESCRIPTION
For 57‑78 XL
SUG. RETAIL
$39.95
OIL TANKS,
FILTERS &
GAS TANKS
FOR 79‑81 XL
Race only; repl. OEM #48315‑60 (ea.)
DESCRIPTION
For 57‑78 XL
5.95
STEM NUT
RETAIL
$16.95
•Hex style with
a chrome finish
•Sold each
SUG.
PART #
DESCRIPTION
RETAIL
0410‑0160 For 78‑85 XL; repl.
OEM #45718‑71
$13.95
•Chrome‑plated
replacement stem
nut for a variety of stock
and custom front ends and triple trees
•Sold individually
SUG.
PART #
DESCRIPTION
RETAIL
FOR 78‑85 XL
DS‑193619 Hex nut; repl.
OEM #45718‑71
PART #
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
STEM NUT
•Kit includes sleeve, OEM #45721‑54;
stem bolt, OEM #45722‑54; dust shield,
OEM #48370‑52; spacer, OEM #45752‑52;
rubber plug, OEM #46753‑69P and chrome cover, OEM #46750‑69P
BRAKES
FOR 82‑85 XL
SUG
RETAIL
•Chrome stem bolt cover and rubber plug
for models without steering damper
SUG.
STEM
BOLT AND
COVER KIT
PART #
2401‑0650
PART #
CHROME STEM BOLT
COVER AND RUBBER PLUG
•Upper and lower set of zinc‑plated
dust covers
•For use with Timken bearings
•Sold in pairs
DESCRIPTION
For 82‑85 XL; repl. OEM #s
48361‑80/48365‑48A
HANDLEBARS,
CONTROLS &
SUG. RETAIL
MIRRORS
NECK POST
BEARING
AND RACES
0410‑0090
FOR 82‑85 XL
PART #
DS‑222961
ELECTRICAL
& LIGHTING
•Genuine Timken® brand
22‑1032
Neck post bearing and race
kit; repl. OEM #s 48300‑60
bearing and 48315‑60 race
$22.95
GASKETS
& SEALS
DESCRIPTION
For 84‑85 XL w/ single disc
22‑1032
STEERING
STEM
BEARINGS AND KIT
ENGINE
TRANSMISSION
& DRIVELINE
NARROW TO WIDE GLIDE
CONVERSION KIT
•Replaces jiffy stand pin OEM #50090‑53
and screw OEM #1760B
JIFFY STAND PIN
AND SCREW KIT
64.95
59.95
64.95
64.95
XL kickstands are measured from the first bend at the top to the first bend at the bottom
of the kickstand.
XL kickstands are measured from the center of the mounting hole to the bend at the
bottom of the kickstand.
•Allows the use of narrow glide 19”
or 21” wheel (found on XL models)
to be installed in a 41mm Wide
Glide front end
•Includes aluminum disc spacer,
socket head screws, axle spacer and axle
•Spacer and axle are cadmium plated; disc
spacer is chrome plated
PART #
$52.95
FOR 52‑E84 XL AND K
CHROME
KICKSTAND SPRING
PART #
DS‑233679
2” under stock length (7” L)
CARBURETORS
& AIR FILTERS
FLOORBOARDS
& PEGS
HARDWARE
DS‑193619
DS‑193004
DESCRIPTION
SUG.
RETAIL
FOR 57‑78 XL
DS‑193004 Hex nut
GENERAL
$21.95
$23.95
685
IRONHEAD XL
SEATS &
SISSY BARS
SHOW CHROME
FORK TUBES
CUSTOM WIDE
SPRINGER
FRONT FORKS
•Classic springer looks
with quality second to
none from the premier
springer manufacturer
EXHAUST
•Wide springer without shock features
mounting points for dual disc brakes;
no front fender mounting points
CARBURETORS •Wide springer with shock has a front
& AIR FILTERS fender mount similar to the
88-92 FXSTS
•Distance between rear legs is 85/16”;
outside width is 91/2”
•Forks come assembled and include
P-181-ST
ENGINE
fork neck, top nut, crown nut, riserstyle top clamp and inner springs
•Both springers use standard 1” neck bearings
•Require use of the Paughco axle, available separately;
TRANSMISSION fork recommended for 21” wheels only
& DRIVELINE
•Require 1/2”-20 riser stud/bolt
GASKETS
& SEALS
•Designed to fit a wide
variety of models
•Sold in pairs
•Lengths given for OEM replacements
may not be the exact OEM length
PART #
DS‑220100 23.50” (Repl. OEM #45977-73 XL)
DS‑220108 25.50”
DS‑220110 27.25”
P-S181-ST
SUG. RETAIL
Standard; 25” L
$1,454.95
WIDE SPRINGER W/ SHOCK
Standard; 25” L
+3” (76.2mm) over stock; 28” L
3/4”
3/4”
23.25” (Repl. OEM #45407-73 XL)
25.25” (Repl. OEM #45644-77)
27.25”
29.25”
236.95
240.95
247.95
251.95
FOR 73‑74 XL (KAYABA) (35MM)
ELECTRICAL PART #
DESCRIPTION
& LIGHTING WIDE SPRINGER W/O SHOCK
P‑186B1
P‑186A1
$234.95
247.95
FOR 75‑83 XL (SHOWA) (35MM)
DS‑221200
DS‑221205
DS‑221210
DS‑221220
FOR ALL 82‑85 XL
HANDLEBARS, P‑S181‑ST
CONTROLS & P‑S181‑3
MIRRORS
AXLES
SUG. RETAIL
DS‑221420 23.50” (Repl. OEM #45407-83)
DS‑221422 27.50”
NOTE: Overall length is measured from the bottom of the top clamp to the
center of the rear leg pivot. Please note that 25” stock length forks are
the same length as OEM forks used on 48-84 FLH Big Twins. The correct
length for the equivalent of a FXSTS springer fork would be +3” over
stock (28” total).
P‑181‑ST
DESCRIPTION
FOR 84‑85 XL (35MM)
1,699.95
1,699.95
axle kit; OEM brake
axle kit; PM brake
97.95
97.95
236.95
240.95
247.95
GOLD VALVE
CARTRIDGE FORK
EMULATOR
•Makes damping rod forks
perform like well-tuned
cartridge forks
•Tunable valves sit on top
of damping rods; held in place by the main springs
•Typical road race track tests show an improvement
of 2 seconds per lap
•Simple to install and tunable for all conditions and
rider preferences
PART #
FEGV‑S3001
DESCRIPTION
For all 35mm forks
SUG. RETAIL
$159.95
CABLES
BRAKES
FORK DAMPER TUBE BOLT KIT
•Kit includes two black socket-head bolts and
two copper washers
NOTE: Only for use with 3/4” axles.
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
PART #
2404‑0506
DESCRIPTION
For 75-84 Showa forks; repl. OEM #45405-75A
SUG. RETAIL
$4.95
FRONT FORK
DAMPER TUBE
MOUNTING KIT
FORK SPRINGS
•Accuracy and performance
•Accurate rates within 2%
•Chrome silicon, high stiffness-to-mass ratio, shot-peened,
heat-treated and preset
•Choose from varying spring rates to suit your riding needs
•Kit includes two
socket-head bolts and
two copper washers
CHASSIS,
SUSPENSION, •Made in the U.S.A.
FENDERS
& WHEELS
PART #
DS‑222051
DESCRIPTION
For 73-85 XL w/ Showa front end; repl. OEM #45405-75A
SUG.
RETAIL
$6.95
FLOORBOARDS
& PEGS
PART #
DESCRIPTION
SUG. RETAIL
FOR 79‑85 XL1000 (35mm)
FRSPS323480
FRSPS323485
FRSPS323490
FRSPS323495
FRSPS323410
.80kg/mm spring
.85kg/mm spring
.90kg/mm spring
.95kg/mm spring
1.00kg/mm spring
$109.95
109.95
109.95
109.95
109.95
FORK SPRINGS
HARDWARE
GENERAL
686
•High-quality, highperformance replacement
fork springs eliminate front
end sag, reduce nose dive
under braking, improve
cornering stability, increase
ride comfort and allow forks to
utilize full travel
•Sold in pairs
PART #
DS‑222040
0405-0327
REPLACEMENT FORK SPRINGS
•Great low-cost solution for those who want
OEM-spec fork springs
•Made to exact OEM specifications
•Sold in pairs
DESCRIPTION
For 52-85 XL, XR (35mm)
SUG. RETAIL
$92.95
PART #
0405‑0327
0405‑0329
DESCRIPTION
For 71-72 XL models; repl. OEM #46057-71 (35mm) H.D.
For 75-79 XL models; repl. OEM #45408-75 (35mm) Showa
SUG.
RETAIL
$65.95
65.95
IRONHEAD XL
SEATS &
SISSY BARS
LOWBOY FORK
LOWERING KIT
FORK LOWERING KIT
•Lowering kit utilizes Progressive
Suspension’s experience and
knowledge to provide exact
model applications
•Progressively wound for more
comfort and control over a variety
of road surfaces
•Lowers forks up to 2”
•Kit comes complete with springs, spacers
and installation instructions
PART #
PS‑01559
•This is how you get the look
most everybody wants
•Lowers the forks up to 2”
•Comes with two rebound
springs and two 30.5mm o.d.
progressively wound fork springs
plus instructions
•Easy installation
PART #
DS‑221442
DESCRIPTION
For 84-85 XL (35mm)
EXHAUST
CARBURETORS
& AIR FILTERS
DESCRIPTION
For 84-85 XLH 1000 (35mm tubes)
SUG. RETAIL
$99.95
SUG. RETAIL
$117.95
ENGINE
TRANSMISSION
& DRIVELINE
FORK TUBE CAPS
•High-quality OEM replacement components
•Chrome finish
•Sold in pairs
PART #
DS‑222785
0403-0047
0403-0046
DESCRIPTION
Fork tube caps for 73-85 XL (fine thread);
repl. OEM #45993-73 (pr.)
GASKETS
& SEALS
SUG. RETAIL
$27.95
FORK LEG ASSEMBLY
REBUILD KITS
•Complete kit, includes all parts needed
for a complete rebuild of one set of front fork leg assemblies
PART #
0403‑0047
0403‑0046
DESCRIPTION
For 84-85 XL (35mm fork legs)
For 75-83 XL (35mm fork legs)
FORK TUBE CAPS
SUG. RETAIL
$44.95
39.95
2401-0637
2401-0636
•Chrome-plated finish
•Available in a custom domed design or traditional flat top design
•Sold each
PART #
DESCRIPTION
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
SUG. RETAIL
FOR 52‑72 XL
2401‑0636
2401‑0637
FORK SLIDER
BUSHINGS
DESCRIPTION
RETAIL
FOR 84‑85 XL (35MM)
Fork tube bushings; repl. OEM #45413-84 (.588” wide)
$11.95
Lower fork leg bushings; repl. OEM #45416-84 (.588” wide) 11.95
FORK SLIDER
DRAIN SCREWS
FORK TUBE SPRING
RETAINER AND PIN
WRENCH KIT
2401-0646
DASHES
& GAUGES
•Includes pin wrench and two retainers
•Retainers are available separately
PART #
2401‑0646
2401‑0647
DESCRIPTION
Kit for 52-72 XL
Repl. retainers
SUG. RETAIL
CHASSIS,
$40.95 SUSPENSION,
22.95
FENDERS
& WHEELS
•Chrome-plated button
head Allen screw with
copper compression washer
PART #
2401‑0115
FLOORBOARDS
& PEGS
DESCRIPTION
For 73-85 XL
SUG. RETAIL
$4.95
FORK DRAIN SCREW KIT
•Kits include chrome button screws and seal washers
PART #
2401‑0393
DESCRIPTION
For 73-85 XL; repl. OEM #45790-80BH
SUG. RETAIL
$5.95
HARDWARE
FORK BOOTS
CHROME FORK OIL
DRAIN PLUGS
•Sold in pairs, include
Allen wrench
PART #
DS‑190713
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
DS-222126
NOTE: Bushings and seals should be replaced whenever the front forks
are disassembled.
SUG.
DS‑222125
DS‑222126
$25.95
25.95
DS-222125
•Replaces OEM bushings
•Sold in pairs
•Made in Japan
PART #
Custom design
Flat top design
DESCRIPTION
For 73-85 XL w/ 35 or 39mm tubes;
repl. OEM #45790-80
SUG. RETAIL
$2.95
•Keep dirt and dust out
of the fork seals to
ensure long fork life
•Black molded 35mm rubber fork boots replace
worn stock boots; sold in pairs
PART #
DS‑240350
DESCRIPTION
For 76-85 XL (Showa); repl. OEM #45404-75
GENERAL
SUG. RETAIL
$5.95
687
IRONHEAD XL
SEATS &
SISSY BARS
DS‑380031
FRONT FENDER
EXHAUST
DS‑380038
•Original‑style fender
NOTE: Chrome fender
brackets must be
ordered separately.
CARBURETORS
& AIR FILTERS
ENGINE
PART #
DS‑380038
DS‑380031
XLX-STYLE
FRONT
FENDER
TRANSMISSION
•Designed for
& DRIVELINE
•Heavy‑duty 1/4” x 5/16” stainless steel rivets
•Sold in packs of 25
PART #
DESCRIPTION
DS‑393482 For 73‑85 XL Narrow Glide front ends
w/ 18” or 19” front tires
SUG. RETAIL
PART #
DS‑380034
$49.95
DESCRIPTION
For XL‑style front fenders, PART #s DS‑380038, DS‑380039
and DS‑380041; repl. stock rivets on 73‑85 XL
ELECTRICAL
& LIGHTING
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
EAGLE HEAD
FRONT FENDER
ORNAMENTS
•Chrome with a black shroud
•Includes a rubber gasket and
mounting hardware
•Universal application, fits most
front fenders
•Sold each
DESCRIPTION
Fender skull
ornament (ea.)
SUG. RETAIL
$29.95
PART #
DS‑287556
DS‑287555
DS‑287554
DS‑287553
DS‑287552
DESCRIPTION
Small chrome eagle head (gold eyes)
Small chrome eagle head w/ lights (red eyes)
Repl. bulb w/ wires for DS‑287555
Large chrome eagle head w/ lights (amber eyes)
Large chrome/gold eagle head w/ lights (amber eyes)
688
DS‑287552
SUG. RETAIL
$23.95
29.95
3.95
59.95
73.95
REAR FENDERS
•Raw stamped steel
construction; measure
approximately 71/4”
wide (inside)
•Original‑style fender
with taillight mount
•Accept OEM fender struts
and mounting hardware
QUICKBOB™ REAR FENDER
•Unique steel fender converts the look of a stock XL rear
fender to an FXWG‑type bobbed rear fender
•Uses XL sissy bar side straps, but it is wider so an 81/4” FX‑style
sissy bar back must be used
•Chrome fender struts with hardware, license plate/taillight
mount and your choice of taillight must be ordered
separately to complete installation
NOTE: Components cannot be interchanged with OEM or
aftermarket parts.
GENERAL
DS‑287553
NOTE: Requires drilling fender to mount.
NOTE: Requires drilling fender to mount.
PART #
1405‑0158
DS‑287555
•Die‑cast eagle fender ornaments in two different sizes
•Small measures approximately 11/2” tall; large is approximately 21/2” tall
•Available as all‑chrome or chrome with gold beak, plus some with 12 volt
eyes that light up
•Fit most front fenders; include gasket and mounting hardware
SHROUDED SKULL
FENDER ORNAMENT
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
HARDWARE
$23.95
DS‑287556
DASHES
& GAUGES
FLOORBOARDS
& PEGS
SUG. RETAIL
DS‑287554
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
SUG. RETAIL
$61.95
30.95
FRONT FENDER RIVETS
a close fit on
19” wheels
GASKETS
& SEALS
DESCRIPTION
For 73‑85 XL models; repl. OEM # 59007‑73B
Mount brackets for fender (pr.)
PART #
DESCRIPTION
DS‑380061 QuickBob rear fender only for 57‑78 XL
DS‑380062 QuickBob rear fender struts with
hardware only for 57‑78 XL (pr.)
DS‑380063 License plate/taillight mount
SUG. RETAIL
$149.95
149.95
63.95
PART #
1401‑0330
1401‑0326
1401‑0325
1401‑0330
DESCRIPTION
For 82‑85 XL; repl. OEM #59674‑81A
For 79‑81 XL; repl. OEM #59674‑79A
For 73‑78 XL; repl. OEM #59611‑73A
1401‑0326
SUG. RETAIL
$99.95
62.95
99.95
FAT BOB-STYLE
REAR FENDER
•Universal custom fender with
right‑hand chain cutaway
•Measures 38” L x 7” W x 51/2” D and has
a raw steel finish
PART #
DS‑393497
DESCRIPTION
Fat Bob‑style rear fender
SUG. RETAIL
$84.95
IRONHEAD XL
SEATS &
SISSY BARS
CUSTOM REAR FENDER
•Raw steel construction
•Not pre‑drilled
•No taillight or license plate mount
PART #
1401‑0328
EXHAUST
6” FLAT REAR FENDER
DESCRIPTION
For 82‑85 XL
SUG. RETAIL
$89.95
•16‑gauge, deep‑drawn steel with
a raw finish
•Each is 41” L x 11/4” D
PART #
DS‑393500
DESCRIPTION
6” flat rear fender, bobbed
SUG. RETAIL
$69.95
CARBURETORS
& AIR FILTERS
ENGINE
DS‑380125
STEEL FLAT FENDERS
•Heavy 16‑gauge steel
construction, 42” long
•Available in 71/2”, 81/2”, 9” and
10” widths
PART #
DS‑380125
DS‑380126
DS‑380128
1925‑2610
DESCRIPTION
71/2” wide
81/2” wide
9” wide
10” wide
SUG. RETAIL
$72.95
72.95
72.95
89.95
FENDER
BRACES
•1” wide chrome‑
plated braces
are designed to
provide necessary
support for rigid
1413‑0016
frame applications
•Constructed of 1/4” thick steel
•Available for 5”, 6”, 71/2”, 81/2” or 9” wide flat fenders
•Sold each
PART #
1413‑0016
1413‑0013
1413‑0014
1413‑0015
DESCRIPTION
For 5” and 6” flat fenders
For 7 1/2” flat fenders
For 8 1/2” flat fenders
For 9” flat fenders
PART #
1401‑0335
1401‑0336
1401‑0337
1401‑0338
GASKETS
& SEALS
1401‑0338
DESCRIPTION
6” W
7 1/2” W
8 1/2” W
9” W
SUG. RETAIL
$48.95
58.95
58.95
58.95
REPLACEMENT
REAR FENDER STRUTS
1413‑0013
ELECTRICAL
& LIGHTING
SUG. RETAIL
$59.95
59.95
59.95
59.95
SUG. RETAIL
$18.95
CABLES
•Beautifully chromed rear fender struts
•Available in stock style
•Sold in pairs
PART #
DS‑264072
•Comes complete with
chrome bolts, washers and acorns
DESCRIPTION
For 54‑78 XL
TRANSMISSION
& DRIVELINE
•Top‑quality, heavy
14‑gauge steel
•Measure 48” L
•Available in 6”, 71/2”, 81/2”
or 9” widths
•Sold each
HANDLEBARS,
CONTROLS &
MIRRORS
FENDER RAIL
MOUNTING KIT
PART #
DS‑190890
FLAT
FENDERS
DESCRIPTION
For 82‑85 XL; repl. OEM #59950‑81
SUG. RETAIL
$99.95
OIL TANKS,
FILTERS &
GAS TANKS
REAR FENDER
MOUNTING HARDWARE KIT
•Kit includes two 3/8”‑24 bolts; OEM #4362, four
5/16”‑24 screws: OEM #2272, four 5/16”‑24 nuts;
OEM #7753, two 3/8”‑24 nuts; OEM #7800W, four 5/16”
lockwashers; OEM #7232 and two 3/8” lock washers
•Available in chrome or cadmium finish
PART #
DESCRIPTION
FOR 59‑78 XL
2401‑0658
2401‑0659
Chrome
Cadmium
BRAKES
DASHES
& GAUGES
2401‑0658
CHASSIS,
SUSPENSION,
FENDERS
&
WHEELS
$23.95
SUG. RETAIL
19.95
FLOORBOARDS
& PEGS
FENDER
LUGGAGE RACK
•Wider size for increased
carrying capacity
•Constructed of 1/2” dia. tubing with
chrome finish
•Feature heavy‑duty front and rear mounts
and improved plug‑in fender pads
•Integrated tie‑down loops for
bungee hooks
•10 lb. load capacity
•Redesigned rear bracket simplifies installation
•Mounts to stock seat mounting screw and
license plate bracket
PART #
DESCRIPTION
•Measures 91/2” x 7”
1510‑0099
For 79‑85 XL
HIGHWAY BAR
HARDWARE
•Brilliant chrome finish for show‑bike looks
•Made of durable 4130 chromoly
•Front bars are 11/4” in diameter
CAUTION: Highway bars are designed for appearance
only and may provide only a small amount of
protection for the motorcycle. They are not
intended to provide bodily protection in any
circumstance.
SUG. RETAIL
$99.95
PART #
10‑5016‑01
DESCRIPTION
For L84‑85 XL
GENERAL
SUG. RETAIL
$239.95
689
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
CARBURETORS
& AIR FILTERS
412 SERIES SHOCKS
•Manufactured from the finest materials available
•Designed specifically for Harley models
•412 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic
valving and an adjustable spring preload; proven under extensive testing; easily
installed; available in all black or with chromed springs and end caps (shock cartridge
is not chrome)
TRANSMISSION
•Available in standard shocks for the average single rider or heavy-duty
& DRIVELINE
•Heavy duty applications are recommended for bikes that are operated at or near the
manufacturer’s maximum load rating over 50% of the time
•TÜV approved
ENGINE
GASKETS
& SEALS
NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.
NOTE: CHR denotes chrome shock part numbers; BLK denotes black shock
part numbers.
NOTE: When installing shocks on 79-85 XL models, it may be necessary to modify or
space the chain/belt guard to allow proper clearance.
ELECTRICAL
& LIGHTING NOTE: A shock which is slightly longer than stock may alter the head angle slightly
Black
and provide somewhat quicker steering.
NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and
provide somewhat slower steering.
HANDLEBARS,
CONTROLS & NOTE: For OEM shock lengths, see Quick Reference Guide in the back of the OldBook.
MIRRORS
NOTE: Some or all shocks listed have TÜV approval. Refer to most recent TÜV certificate for
Chrome
current listing.
CABLES
NOTE: Before purchasing or attempting to install shocks that are different than the OEM
length, confirm that your wheel travel can be altered without causing clearance issues
such as, swingarm/axle to exhaust contact as well as chain/belt guard or tire contact.
STANDARD 412 SERIES SHOCKS
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
FITS MODEL
For 79-85 XL, XLCR
For 73-78 XLH
For 73-78 XLCH
For 53-72 Sportster
COLOR
CHR
BLK
CHR
CHR
CHR
11”
DS‑310093
DS‑310092
‑
‑
‑
11.5”
DS‑310033
DS‑310034
‑
‑
‑
12”
PS4049C
PS4049B
‑
‑
‑
12.5”
DS‑222000
DS‑222010
‑
‑
‑
13”
DS‑222001
DS‑222011
‑
‑
‑
13.5”
DS‑222002
DS‑222012
DS‑222009
DS‑222009
DS‑222009
14.25”
DS‑310059
DS‑310057
DS‑222003
DS‑222003
DS‑222003
SUG. RETAIL
$299.95
299.95
299.95
299.95
299.95
HEAVY‑DUTY 412 SERIES SHOCKS
FITS MODEL
For 79-85 XL, XLCR
DASHES
& GAUGES
COLOR
CHR
BLK
11”
PS4022C
PS4022B
11.5”
PS4011C
‑
12”
PS412‑4050C
PS4050B
12.5”
PS4001C
PS4001B
13”
PS4002C
PS4002B
13.5”
PS4003C
PS4003B
SUG. RETAIL
$299.95
299.95
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
FLOORBOARDS
& PEGS
HARDWARE
GENERAL
690
12.5” 416 SERIES AIR SHOCKS
•Manufactured from the finest materials available
•Designed specifically for Harley models
•416 series air shocks have air adjustability to allow fine tuning for safety and heavy
loads, plus multi-stage automatic valving adjusts for all conditions; brushed aluminum
with clear anodized finish
•TUV approved
NOTE: Before purchasing or attempting to install shocks that are different than the
OEM length, confirm that your wheel travel can be altered without causing
clearance issues such as, swingarm/axle to exhaust contact as well as chain/
belt guard or tire contact.
PART #
DS‑222005
DESCRIPTION
For 79-85 XL
SUG. RETAIL
$399.95
IRONHEAD XL
Black
Chrome
444 SERIES
SEATS &
SISSY BARS
•Features the all new Frequency Sensing Technology (FST) which allows the shocks to
sense the frequency of a bump and automatically adjust damping for superior ride quality
•Deflective disc valving
•Adjust spring pre-load by hand, no special tool needed
•Includes a progressive rate spring and is high-pressure gas charged for
consistent performance
•Standard or heavy duty spring rate with a black or chrome finish
EXHAUST
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and
provide somewhat quicker steering.
CARBURETORS
& AIR FILTERS
NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and
provide somewhat slower steering.
NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of the OldBook.
NOTE: Before purchasing or attempting to install shocks that are different than the OEM
length, confirm that your wheel travel can be altered without causing clearance
issues such as, swingarm/axle to exhaust contact as well as chain/belt guard or
tire contact.
ENGINE
STANDARD 444 SERIES SHOCKS
COLOR
11”
11.5”
12”
13”
13.5”
SUG. RETAIL
1310‑0754
1310‑0753
1310‑0756
1310‑0755
1310‑0785
1310‑0784
1310‑0760
‑
1310‑0762
‑
$669.95
624.95
1310‑0754
1310‑0753
1310‑0756
1310‑0755
1310‑0785
1310‑0784
1310‑0760
‑
1310‑0762
‑
669.95
624.95
11”
11.5”
12”
13”
13.5”
1310‑0772
1310‑0771
1310‑0764
1310‑0763
1310‑0787
1310‑0786
1310‑0751
1310‑0750
1310‑0752
1310‑0872
$669.95
624.95
1310‑0772
1310‑0771
1310‑0764
1310‑0763
1310‑0787
1310‑0786
1310‑0751
1310‑0750
1310‑0752
1310‑0872
669.95
624.95
TRANSMISSION
& DRIVELINE
FOR 79‑85 XL
CHR
BLK
FOR 77‑78 XLCR
CHR
BLK
HEAVY‑DUTY 444 SERIES SHOCKS
COLOR
SUG. RETAIL
FOR 79‑85 XL
CHR
BLK
FOR 77‑78 XLCR
CHR
BLK
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
BRAKES
12 SERIES 11.5” SHOCKS WITHOUT SPRINGS
•Gas-charged with fade-free damping and consistent operation
•Automatic, six-stage damping adjusts to a variety of conditions
•Special cams allow easy preload adjustment
•Springs sold separately; available in a variety of rates; PART #s
DS-222014-16 and DS-310030-32 are recommended
•TÜV approved
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.
PART #
DS‑310049
DESCRIPTION
For 79-85 XL
SUG. RETAIL
$202.95
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
DS-222014
DS310030
REPLACEMENT SPRINGS FOR PROGRESSIVE
SUSPENSION 12- AND 412-SERIES SHOCKS
FLOORBOARDS
& PEGS
•Various rates allow fine-tuning for specific needs
•Choice of highly chromed and black springs
•Sold in pairs
NOTE: These springs must be ordered when ordering 12-series
shocks. However, they can be used as replacements for
the 412-series shocks.
PART #
DESCRIPTION
DS‑2220141 70-120 psi chrome springs (std. spring on chrome 4000
series shocks)
DS‑3100301 70-120 psi black springs (std. spring on black 4000
series shocks)
DS‑2220151 95-140 psi chrome springs
DS‑3100311 95-140 psi black springs
HARDWARE
SUG.
RETAIL
$92.95
76.95
92.95
76.95
PART #
DS‑2220161
DS‑3100321
DS‑310035
PS‑1370C
PS‑1370B
PS‑1375C
1
DESCRIPTION
105-150 psi chrome springs
105-150 psi black springs
125-170 psi black springs
90-130 psi chrome spring for 11.5” shocks only
90-130 psi black spring for 11.5” shocks only
115-155 psi chrome springs for 11” and 11.5” shocks only
SUG.
RETAIL
$92.95
76.95
76.95
92.95
76.95
92.95
These springs will not fit shock PART #s DS-222003, DS-222009 or DS-310087.
GENERAL
691
IRONHEAD XL
SEATS &
SISSY BARS
DRAG SPECIALTIES
SHOCK ABSORBERS
•Shock bodies are steel
construction with multi‑stage
velocity‑sensitive hydraulic dampers
•Feature progressive rate springs that
1310‑0636
provide a softer initial response, but
EXHAUST
resist bottoming better than
stock springs
•Improved damping rates for a more controlled ride with no wallowing
•5‑position adjustable spring pre‑load (adjusting tool included)
CARBURETORS •Chrome‑plated covers and springs for style
& AIR FILTERS •Custom lengths available for stock ride height or a lowered,
custom look
•Manufactured to Drag Specialties specifications by Progressive Suspension
•Sold in pairs
•TÜV approved
ENGINE
1310‑0747
NOTE: Lowering the motorcycle will reduce ground and cornering clearance.
NOTE: When installing replacement shocks on 79-85 XL models, it may be necessary to modify or space the chain
guard/belt guard to allow proper shock clearance.
TRANSMISSION
NOTE: Heavy Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of
& DRIVELINE
the time.
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
BRAKES
NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered
without causing clearance issues such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact.
STANDARD
HEAVY DUTY
FITS MODEL
For 79‑85 XL,
77‑78 XLCR,
83‑84 XR 1000
SUG.
COLOR 11”
11.5”
12.5”
13”
RETAIL
CHR
1310‑0630 1310‑0636 1310‑0643 1310‑0649 $199.95
BLK
1310‑0740 1310‑0744 1310‑0746 ‑
199.95
10” STRUTS
COLOR 11”
11.5”
13”
SUG. RETAIL
CHR
1310‑0631 1310‑0637 1310‑0650
$199.95
BLK
1310‑0741 1310‑0745 1310‑0747
199.95
CHROME SHOCK
COVER KITS FOR
PROGRESSIVE SHOCKS
•0.120” wall DOM steel construction
•11/8” o.d. shafts with 0.120” wall
TIG welded sleeves
•1/2” i.d. mounting stud holes
•Matte black electroplated finish
•CNC lathe turned ends
•10” length (eyelet center‑to‑center)
•Sold in pairs
PART #
1304‑0538
FITS MODEL
For 79‑85 XL, 77‑78
XLCR, 83‑84 XR1000
•Available for Progressive
412 series shocks on various
H‑D models
•Sold in pairs
DESCRIPTION
10” struts
SUG. RETAIL
$89.95
PART #
PS‑5027C
DESCRIPTION
Top and bottom covers for 11” Progressive shocks
(DS‑310092) 77‑85 XL and 83‑85 XR1000 models
SUG. RETAIL
$97.95
OIL TANKS,
FILTERS &
GAS TANKS
CHROME SHOCK
TOP CAPS
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
FLOORBOARDS
& PEGS
•For all swingarm Harleys
with stock shocks
•3/8” longer than stock for a better fit
•Come with polished stainless steel
clamps, screws and nuts
•Sold in pairs
REAR SHOCK BUSHINGS
•Replacement rubber bushings
•Designed for use in OEM‑style shocks
•Sold in kit of four
PART #
0431‑0435
DESCRIPTION
For 54‑74 XL; repl.
OEM #85210‑42A
SUG. RETAIL
$8.95
SHOCK STUDS
HARDWARE
PART #
DESCRIPTION
DS‑310040 For 57‑78 XL; repl. OEM #s 54704‑52
and 54705‑52
DS‑310177
DS‑310176
DESCRIPTION
692
PART #
DS‑310012
DESCRIPTION
For 82‑85 XL; repl.
OEM #54707‑88A (pr.)
SUG.
RETAIL
$11.95
DS‑175032
DS‑310179
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
NUTS AND WASHERS
For 75‑78 XL; repl. OEM #54515‑75
For 57‑74 XL; repl. OEM #54515‑56B
$15.95
15.95
LOWER SHOCK STUDS
DS‑310179
DS‑310178
$24.95
DS‑310177
UPPER SHOCK STUDS
GENERAL
SUG. RETAIL
DS‑310186
•Zinc‑plated studs are available in upper and
lower styles
•Nylock nuts are cadmium‑plated and cup
washers are chrome‑plated
•Studs are sold separately
PART #
CHROMED
SHOCK TOP
STUD COVERS
For 75‑78 XL; repl. OEM #54516‑75
For 57‑74 XL; repl. OEM #54516‑72
17.95
15.95
DS‑175032
DS‑310186
DS‑310187
DS‑310188
5/8”‑18
thin nylock nuts (2‑pk.); repl. OEM #7993
Cup washers 3/8” i.d. (10‑pk.); repl. OEM #54543‑65
$2.95
3.95
3.95
3.95
IRONHEAD XL
DS-380155
0203-0413
SEATS &
SISSY BARS
0203-0412
EXHAUST
CARBURETORS
& AIR FILTERS
ENGINE
0204-0370
0203-0415
TRANSMISSION
& DRIVELINE
REPLACEMENT
LACED WHEELS
•40-spoke wheels feature chrome steel
rims, chrome spokes and chrome steel
hubs (unless noted)
•Fully assembled and trued with bearings
installed and end play set
•Available in most applications
•Uses OEM mounting hardware
DESCRIPTION
GASKETS
& SEALS
0204-0373
PART #
SUG.
RETAIL
ELECTRICAL
& LIGHTING
FRONT WHEELS
19” x 2.5” for 84-85 XL;
repl. OEM #43312-84
19” x 2.5” for 78-83 XL (dual
disc); repl. OEM #43341-78
21” x 2.15” for 84-85 XL (single/
dual disc); repl. OEM #43557-87
21” x 2.15” for 78-83 XL
HANDLEBARS,
CONTROLS &
MIRRORS
0203‑04131 $345.95
DS‑3801551
345.95
0203‑04121
0203‑04151
349.95
349.95
CABLES
REAR WHEELS
16” x 3” for 82-85 XL; repl. OEM #40951-82 0204‑0370
16” x 3” for 79-81 XL; repl. OEM #43720-81 0204‑0374
16” x 3” for 57-78 XL/K
0204‑0373
1
329.95
329.95
329.95
0204-0374
BRAKES
Has a polished and chrome-plated billet aluminum hub.
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
POWDERCOATED 40-SPOKE
WHEEL ASSEMBLIES
•Affordable 40-spoke assemblies look great on
“old school” bikes
•Feature chrome spokes and a chrome steel hub
with custom powdercoated hubcaps to hide the
mounting hardware
•Designed for applications with 3/4” Timken bearings
•Bearings are pre-set at the factory and ready to install
FLOORBOARDS
& PEGS
HARDWARE
FRONT WHEELS
PART #
REAR WHEELS
DESCRIPTION
SUG. RETAIL
FOR 78‑83 XL AND PAUGHCO WIDE SPRINGERS
(WHEN USING A SINGLE DISC BRAKE)
0203‑0537
0203‑0538
{
Black, 21” x 2.15”
Red, 21” x 2.15”
PART #
DESCRIPTION
SUG. RETAIL
FOR 82‑85 XL
$399.95
399.95
0204‑0425
0204‑0426
Black, 16” x 3.00”
Red, 16” x 3.00”
SAFETY WARNING: When selecting custom wheels, the tires used for your application must have a load index and
speed rating equal to or greater than the tires fitted as original equipment. Consult manufacturer’s
publication(s) and/or website(s) for complete tire information.
$399.95
399.95
}
GENERAL
693
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
CARBURETORS
& AIR FILTERS
ENGINE
ROLLED EDGE FRONT RIM
16” CHROME RIM
•Top-quality show-chromed steel rim
•Feature rolled edge for superior strength
TRANSMISSION •Drop-center styling like original
& DRIVELINE
•Have the spoke dimple pattern of the OEM rims
PART #
DS-380010
•Distinctively chromed
40-hole steel rim
•Dimpled to accept almost all spoke lacing patterns
•Measures 3” x 16”; for use with 5.00/5.10 motorcycle tires
DESCRIPTION
2.50” x 19”; repl. OEM #43018-73
SUG. RETAIL
$104.95
PART #
DS-380000
DESCRIPTION
3” x 16” rim
SUG. RETAIL
$84.95
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
CHROME AND STAINLESS STEEL SPOKE SETS
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
•Strong, quality spoke sets used in stock and custom applications
•All sets include nipples and spoke wrench for installation
•Not for use with OEM-profile style rims
FITMENT
SIZE
DROP CTR. RIM
CHROME
16”
DS-380101
SUG. RETAIL
DROP CTR. RIM
STAINLESS
LENGTH
DS-380201
63/4”
$126.95
81/4”
162.95
SUG. RETAIL
CUSTOM RIM
CHROME
SUG. RETAIL
LENGTH
REAR HUB
57-85 XL, Custom
$56.95
-
-
-
ALUMINUM FRONT HUB DISC BRAKE, INSIDE LACE (NARROW GLIDE)
73-85 XL
19”
-
-
DS-380239
DS-380133
$61.95
83/4”
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
CHROME SPOKE SETS FOR DRAG SPECIALTIES
SPUN STEEL AND EXCEL ALUMINUM RIMS
FLOORBOARDS
& PEGS
•These rims require special spokes and nipples for lacing to OEM-style steel
or aluminum hubs
•Each 40-spoke set also includes a spoke wrench
NOTE: 18” Excel rim requires extended length spoke nipples, PART #s DS-380106
and DS-380107, sold separately.
HARDWARE
NOTE: Spokes listed will also work with Akront aluminum rims.
PART #
RIM SIZE
LENGTH
SUG. RETAIL
16” steel hub
61/2”
$61.95
19” aluminum hub
81/2”
61.95
WIDE GLIDE HUB
DS-380105
DS-380105
GENERAL
694
{
NARROW GLIDE HUB
DS-380138
SAFETY WARNING: When selecting custom wheels, the tires used for your application must have a load index and
speed rating equal to or greater than the tires fitted as original equipment. Consult manufacturer’s
publication(s) and/or website(s) for complete tire information.
}
IRONHEAD XL
SEATS &
SISSY BARS
DS‑380111
EXHAUST
CARBURETORS
& AIR FILTERS
TWISTED AND DIAMOND-CUT
CHROME SPOKE SETS
ENGINE
DS‑380110
•Give spoked wheels a custom look
•Available for drop‑center wheels
•Each set includes 40 spokes and nipples
PART #
DESCRIPTION
LENGTH
TRANSMISSION
& DRIVELINE
SUG. RETAIL
TWISTED SPOKE SETS
PART #
DS‑380111 16” Wide Glide hub and drop‑center rim
63/4”
DS‑380119 19” Narrow Glide hub and drop‑center rim 81/4”
$79.95
91.95
DESCRIPTION
LENGTH
SUG. RETAIL
DIAMOND‑CUT SPOKE SET
DS‑380110 16” Wide Glide hub and drop‑center rim
63/4”
$66.95
GASKETS
& SEALS
RIM STRIPS
•High‑quality heavy‑duty rubber rim strip
•Prevent chafing of the inner tube by spoke nipples
•Measurement given is for rim diameter and actual
width of the rim strip
•Sold to dealer in 10‑pack
PART #
DS‑181503
DS‑181504
DS‑181502
DS‑181506
DESCRIPTION
16” x 1.5” center valve
16” x 1.5” side valve
18” x 2” center valve
ELECTRICAL
& LIGHTING
SUG. RETAIL (ea.)
$2.95
2.95
2.95
2.95
PART #
DS‑181510
DS‑181507
DS‑181500
DS‑181505
DESCRIPTION
19” x .75” center valve
21” x .75” center valve
SUG. RETAIL (ea.)
$1.75
2.95
2.95
2.95
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
DS‑380106
DS‑380112
REPLACEMENT NIPPLES FOR
DRAG SPECIALTIES SPOKE SETS
•Chrome or stainless finish
•Lengths given are overall lengths
•40 nipples per package
PART #
BRAKES
RIM STRIPS
DS‑380113
DS‑380107
DESCRIPTION
SUG. RETAIL
CHROME
DS‑380112
DS‑380106
Standard length (.866”)
Extra‑long (.965”)
$17.95
18.95
Standard length (.866”)
Extra‑long (.965”)
34.95
41.95
STAINLESS
DS‑380113
DS‑380107
•High‑quality rubber
rim strips
•Sold to dealer as 10‑pk; sold to
consumer as each
PART #
K41‑5502‑10
K41‑5503‑10
K41‑5507‑10
K41‑5508‑10
FITS
16” (side valve)
16”/17” (center valve)
18”/19”
20”/21”
SUG. RETAIL
$1.95 (ea.)
1.95 (ea.)
1.95 (ea.)
1.95 (ea.)
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
0214‑0576
0214‑0575
0214‑0574
OIL TANKS,
FILTERS &
GAS TANKS
FLOORBOARDS
& PEGS
0214‑0577
0214‑0583
CHROME AXLE KITS
HARDWARE
•Bright chrome finish on axle and hardware beautifies your bike
•Machined from chromoly steel
•Kits include axle, spacers, nuts and washers
NOTE: Rear axle length given is measured from the inside of the bolt head to the end of the threads.
PART #
DESCRIPTION
SUG. RETAIL
FRONT
0214‑0574
0214‑0575
0214‑0576
0214‑0577
PART #
DESCRIPTION
SUG. RETAIL
REAR
For
For
For
For
52‑72
73‑77
77‑83
84‑85
XL
XL
XL
XL
$49.95
49.95
49.95
49.95
0214‑0583
DS‑223044
For 52‑78 XL (10.9375”)
For 79‑85 XL,
77‑78 XLCR (11.625”)
$49.95
GENERAL
49.95
695
IRONHEAD XL
DS-181191
DS-181192
SEATS &
SISSY BARS
DS-181193
EXHAUST
CUSTOM VALVE STEM CAPS
.38 SPECIAL
VALVE STEM CAPS
0361-0048
CARBURETORS
& AIR FILTERS •Styled to match .38 Special ammo
•Distinctively anodized valve stem caps
•Available in four different colors to spruce up
your wheels
•Sold in pairs
0361-0049
•Available in chrome or gold finish
•Sold in pairs
ENGINE
PART #
0361‑0048
0361‑0049
DESCRIPTION
Gold
Chrome
SUG. RETAIL
$15.95
10.95
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
SUG. RETAIL
$3.95
3.95
3.95
4.95
•Caps taper from 1/2” on the top
to 3/8” on the bottom
•Polished chrome-plated finish
•Sold in pairs
CHROME PISTON
VALVE STEM COVERS
•Measure 5/8” tall x 1/2” o.d.;
sold in pairs
PART #
DS‑181210
DESCRIPTION
Piston valve stem covers
SUG. RETAIL
$9.95
PART #
0361‑0003
DESCRIPTION
Tapered valve stem caps
SUG. RETAIL
$4.95
UNIVERSAL
ANGLED SPOKE
WHEEL WEIGHTS
•Crimp-on style tin weights
•Natural finish
WHEEL WEIGHTS
•Stick-on, 10 gram steel wheel weights
•Heavy-duty silver coating resists corrosion
•Sold in pack of 12
PART #
0365‑0061
BRAKES
DS-181195
DESCRIPTION
Black anodized
Red anodized
Blue anodized
Chrome-plated
TAPERED VALVE
STEM CAPS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
DS‑181191
DS‑181192
DS‑181193
DS‑181195
DESCRIPTION
10g wheel weights
SUG. RETAIL
$7.95
QUICKSTICK
WHEEL WEIGHTS
DESCRIPTION
0365-0031
Silver
Black
Chrome
CHASSIS,
SUSPENSION, 36‑PC. SET (5 GRAM SEGMENTS)
0365‑0043
Silver
FENDERS
0365‑0042
Black
& WHEELS
0365‑0041
Chrome
SUG. RETAIL (ea.)
$1.95
2.95
3.50
0365-0030
0365-0029
SUG. RETAIL
36‑PC. SET (1/4 OZ. SEGMENTS)
0365‑0026
0365‑0027
0365‑0028
DESCRIPTION
10 gram
20 gram
30 gram
0365-0045
•Pre-segmented stick-on steel
wheel weights to match most
stock and custom wheels
•Available in two powder-paint colors
(silver and black) plus chrome
•Come in 1/4 oz. segments or 5-gram weights
PART #
PART #
0365‑0047
0365‑0048
0365‑0049
0365-0047
PART #
0365-0044
DESCRIPTION
SUG. RETAIL
0365-0046
360‑PC. SET (1/4 OZ. SEGMENTS)
$4.95
4.95
6.95
3.95
3.95
4.95
0365‑0020
0365‑0021
0365‑0022
Silver
Black
Chrome
$39.95
39.95
52.95
PART #
DESCRIPTION
SUG. RETAIL
360‑PC. (5 GRAM RECTANGULAR SEGMENTS)
360‑PC. (5 GRAM SQUARE SEGMENTS)
0365‑0031
0365‑0030
0365‑0029
0365‑0045
0365‑0044
0365‑0046
Silver
Black
Chrome
30.95
30.95
40.95
Silver
Black
Chrome
$35.95
35.95
43.95
FLOORBOARDS
& PEGS
0365-0010
HARDWARE
WHEEL WEIGHTS
0365-0053
0365-0054
0365-0055
0365-0056
CHROME SPOKE WHEEL WEIGHTS
GENERAL
696
•Non-lead weights are constructed of chrome/
zinc alloy
PART #
DESCRIPTION SUG. RETAIL
0365‑0053 .25 oz.
$2.95
0365‑0054 .50 oz.
3.50
PART #
0365‑0055 .75 oz.
$3.95
0365‑0056 1 oz.
4.50
0365-0012
•Adhesive steel wheel weights
in 1/8 (3.5 g) or 1/4 oz. (7.1 g) segments
•Weights stick securely to spoked or cast wheels
•Powder-coated or nickel-plated finish
•1/8 oz. segments measure .4” x .51” for proper alignment when used in
combination with Motion Pro’s 1/4-oz. weights
•1/4 oz. segments measure .500” x .750”
PART #
/ OZ. (72‑CT.)
0365‑0010 Silver
0365‑0012 Black
PART #
/ OZ. (144‑CT.)
1 4
1 8
$6.95
6.95
0365‑0059 Silver
0365‑0060 Black
$6.95
6.95
IRONHEAD XL
SEATS &
SISSY BARS
WHEEL BEARING
AND SEAL KIT
•Kit contains all necessary
bearings and seals required for
each individual wheel application
•Bearings are premium EMQ
quality featuring low‑drag, double‑lip
rubber seals that keep water out
and improve grease retention
•Seals are type TC nitrile
elastomer designed to keep
out water and dirt
A25‑1001
CARBURETORS
& AIR FILTERS
ENGINE
NOTE: Follow OEM-prescribed procedures
for installing and checking wheel
bearing end play.
CHROME FRONT
HUB ASSEMBLY
PART #
•All necessary bearings, spacers and seals already installed and
adjusted for correct end play
PART #
DS‑380028
EXHAUST
DESCRIPTION
SUG. RETAIL
FRONT APPLICATIONS
DESCRIPTION
SUG. RETAIL
Single/dual‑disc hub for 84‑85 XL; repl. OEM #43619‑84
$199.95
3/4”
A25‑1001
A25‑1369
For 73‑85 XL; repl. OEM #9052,
i.d.
For 58‑72 XL; repl. OEM #9009, 17mm i.d.
$18.95
18.95
TRANSMISSION
& DRIVELINE
REAR APPLICATIONS
For 79‑85 XL; repl. OEM #9052, 3/4” i.d.
For 58‑78 XL; repl. OEM #9008, 3/4” i.d.
A25‑1002
A25‑1370
17.95
15.95
GASKETS
& SEALS
0215‑0205
ELECTRICAL
& LIGHTING
2401‑0449
2401‑0446
AXLE NUT KITS
WHEEL BEARINGS
0215‑0204
•Direct replacements of OEM components
•Fit front or rear applications
PART #
0215‑0205
0215‑0204
DESCRIPTION
Wheel bearing w/ race for 73‑85 XL; repl. OEM #9052 (ea.)
Wheel bearing for 54‑72 K and XL front wheels and 63‑78
XL rear wheels; repl. OEM #9009
SUG.
RETAIL
$9.95
3.95
•Genuine Timken® direct
replacements of OEM components
•Fit front or rear applications
DS‑540796
DS‑540797
PART #
SUG. RETAIL
For 73‑85 XL w/ 5/8”‑18 thread, chrome
For 57‑71 XL, chrome
For 57‑71 XL, cadmium
$9.95
16.95
12.95
For 79‑85 XL w/ 3/4” axle, chrome
For 57‑72 XL, chrome
For 57‑72 XL, cadmium
13.95
30.95
24.95
$12.95
9.95
5.95
REAR AXLE
SPACER COLLAR
DESCRIPTION
•Black oxide finish
•Sold each
PART #
0222‑0247
CHASSIS,
SUG. RETAIL SUSPENSION,
FENDERS
$10.95
DESCRIPTION
For 52‑73 XL; repl. OEM #41598‑52
& WHEELS
DS‑195403
DS‑195410
PART #
$10.95
1.55 (ea.)
1.55 (ea.)
1.55 (ea.)
1.55 (ea.)
SPACER WASHERS
DS‑195409 Washer; repl. OEM #43650‑82
OIL TANKS,
FILTERS &
GAS TANKS
FLOORBOARDS
& PEGS
HARDWARE
SUG.
RETAIL
SPACER SHIMS
Shim kit (1 each .002”, .004”, .008”, .016”, .023”, .028” shims)
.016”; repl. OEM #43291‑82
.008”; repl. OEM #43292‑82
.004”; repl. OEM #43293‑82
.002”; repl. OEM #43294‑82
BRAKES
DASHES
& GAUGES
DS‑195409
•OEM‑style replacement shims, washers and spacers for
most applications
•Spacers are available with or without flanges
•Shims sold in 10‑pack; washers in 5‑pack; spacers sold each
0222‑0249
DS‑195413
DS‑195412
DS‑195411
DS‑195410
SUG. RETAIL
FRONT
2401‑0446
2401‑0444
2401‑0445
WHEEL BEARING SHIMS,
WASHERS AND SPACERS
PART #
CABLES
DESCRIPTION
DS‑222969
2401‑0449
2401‑0450
WHEEL BEARINGS
DESCRIPTION
Wheel bearing w/ race for 73‑85 XL;
repl. OEM #9052 (ea.)
Wheel bearing only for 73‑85 XL;
repl. OEM #s 9033 and 9052
Wheel race only for 73‑85 XL
•Quality reproduction of original parts
•Kits include axle nut, sleeve nut, cotter pin
and axle nut washer
REAR
DS‑540795
PART #
DS‑540795
HANDLEBARS,
CONTROLS &
MIRRORS
5.95 (ea.)
DESCRIPTION
SUG.
RETAIL
BEARING SPACERS
DS‑195403
DS‑195404
DS‑195406
DS‑195416
DS‑195417
DS‑195421
4.448”
4.434”
4.306”
2.162”
2.162”
2.536”
white w/o flange; repl. OEM #43606‑78
white w/o flange; repl. OEM #43605‑78
green‑yellow w/o flange; repl. OEM #43608‑82
red/white w/o flange; repl. OEM #43634‑74
red/white w/o flange; repl. OEM #43633‑74
gold w/o flange; repl. OEM #43625‑78
$12.95
10.95
10.95
10.95
10.95
9.95
GENERAL
697
IRONHEAD XL
DS-243381
SEATS &
SISSY BARS
EXHAUST
DS-243386
AXLE SPACER STOCK
CHROME OUTER
AXLE SPACERS
•Made from cold-rolled steel
•Polished, then chrome plated
1
3
CARBURETORS •Machined to 1 /4” o.d. and /4” i.d.
•Sold each
& AIR FILTERS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
DS‑243380
DS‑243381
DS‑243382
DS‑243383
DS‑243384
DS‑223037
DS‑243385
DESCRIPTION
.4375”
.5000”
.6250”
.7500”
.8125”
.891”
.9375”
SUG.
RETAIL
$7.95
7.95
7.95
8.95
8.95
8.95
9.95
•Custom axle spacers made easy
•Just measure, cut and install
•Stainless steel construction with a polished finish
•Measure 3/4” i.d. x 6” L, 11/16” o.d.
DS-243380
PART #
DS‑243386
DS‑243387
DS‑243388
DS‑243389
DS‑2230111
DS‑243390
DS‑243391
1
11/8”
DESCRIPTION
1.000”
1.1250”
1.18750”
1.2500”
1.3400”
1.3750”
1.8750”
SUG.
RETAIL
$9.95
9.95
10.95
10.95
9.95
11.95
11.95
o.d.
LEFT REAR
AXLE SPACER
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
0222‑0260
0222‑0258
DESCRIPTION
For 79-85 XL; .705” L; repl. OEM #41606-77
For 80-81 XL; .800” L; repl. OEM #41606-80
For 52-78 XL; repl. OEM #41600-55
SUG. RETAIL
$6.95
6.95
17.95
SWINGARM END
CAP ADJUSTERS
SUG. RETAIL
$44.95
CHROME AXLE CAPS
•Highly chromed, styled after the FL accessory cap set,
OEM #43895-56
•Each set includes caps for both the axle nut and axle
head (where required), setscrews and hex key wrench
•Each cap has an internal hex to allow more thickness for
the setscrew’s thread, eliminating thread-stripping
•See the chart for fitment applications
DESCRIPTION
Swingarm end cap adjusters
AXLE CAP APPLICATIONS
FITS MODEL
81-84 XL
73-80 XL
57-72 XL
FRONT
DS‑222880
DS‑222880
‑
PART #
DS‑222880
DS‑222884
DS‑222885
•Fit models with square swingarms
•Feature die-cast construction with
highly chromed finish
•Deliver increased rear axle adjustment
•Work with our rear axle block adjusters,
PART #DS-195104, and with stock adjusters
on 79-85 XL and 77-78 XLCR; replace OEM #s
47554-73 (end cover) and 7725 (lock nut)
•Sold in pairs
PART #
DS‑195054
DESCRIPTION
Axle spacer bar stock
NOTE: Will not work on late-model rear axles with cotter
key locking devices.
•Zinc finish
•Sold each
ELECTRICAL
PART #
& LIGHTING 0222‑0259
PART #
0222‑0314
DESCRIPTION
3/4” front axle caps (ea.)
3/4” rear axle caps (pr.)
3/4” rear axle caps (pr.)
REAR
DS‑222885
DS‑222884
DS‑222884
SUG. RETAIL
$10.95
13.95
13.95
REAR AXLE ADJUSTERS
SUG. RETAIL
$19.95
•Chrome finish
•Includes two adjusters and four nuts
•Replaces OEM #39985-52 adjusters,
#7744 lock nuts and #7753 lock nuts
PART #
2401‑0601
DESCRIPTION
For 52-78 XL
SUG. RETAIL
$24.95
DASHES
& GAUGES
REAR WHEEL
CHASSIS,
SUSPENSION, ADJUSTER KIT
•Fits the rear wheel of all
FENDERS
models listed below
& WHEELS
REAR AXLE
BLOCK ADJUSTERS
PART #
FLOORBOARDS DS‑193710
& PEGS
DESCRIPTION
For 79-85 XL and 77-78 XLCR;
repl. OEM #s 47554-73 and 7725
SUG. RETAIL
$18.95
•Ensure better alignment of the rear
axle while preventing swingarm
tube collapse due to over-tightening
•Include heavy-duty washer
•Sold in pairs
PART #
DS‑195104
DESCRIPTION
For 77-78 XLCR and 79-85 XL; repl. OEM #41570-77
SUG. RETAIL
$44.95
HARDWARE
REAR AXLE
ADJUSTER ASSEMBLIES
GENERAL
PART #
DS‑195063
698
SWINGARM PIVOT
BOLT SPACER
•Chromed axle chain adjusters
•End cap and locknut included
•Sold in pairs
•Sold each
DESCRIPTION
For 79-85 XL and 77-78 XLCR; repl. OEM #s 41570-77
(adjuster), 47554-73 (end cover) and 7725 (lock nut)
SUG. RETAIL
$19.95
PART #
1302‑0277
1302‑0301
DESCRIPTION
For L74-81 XL right side; repl. OEM #47517-74
For 52-E74 XL right side; repl. OEM #47517-52
SUG. RETAIL
$10.95
10.95

ironhead xl - GUTSCHROME

Transcription

Similar documents

Untitled - Customs