Attache Case Combination Bar Lock Operating

ATTACHÉ CASE COMBINATION
BAR LOCK OPERATING INSTRUCTIONS
Note: Remove and discard the red plastic
insert from the dials.
The locks are set at the fatory to open at 0-0-0.
To set your own combination:
With the Button (2) in the Normal position set
the Dials (1) to the current combination.
Slide the Button (2) toward the Dials (1) and hold it
in this Change Combination Position until the next
step is performed.
Set the Dials (1) to your new combination.
Choose digits that you will remember easily
(address, phone number, birthday, etc.)
1
Dials
2
Button
Normal
Position
Button - Change Combination Position
DO NOT FORGET YOUR NEW COMBINATION!
Release the Button (2) to set your new combination.
CAUTION!
Never rotate the Dials (1) with the Button (2)
in the Change Combination Position unless you
make careful note of the Dial (1) settings upon
release of the Button (2).
The manufacturer is not responsible for damage
resulting form misuse, abusive handling or
failure to follow instructions.
Button - Lock Opening Position
If you need additional assistance, please
contact us directly.
MANCINI Leather Goods Inc. • 3105 Jean-Baptiste-Deschamps Boulevard • Lachine (QC) H8T 3E4 • Tel: 1-800-276-8346 / Fax: 1-800-473-5925
WWW.MANCINILEATHER.COM