advantage minn kota

Transcription

advantage minn kota
Presorted
Standard
U.S. Postage
M i nn Kota M otors
12 1 Powe r D rive
M an kato, M N 5 6 001
PAID
Mankato, MN
Permit No. 121
2011
CATALOG
Jo hnso n Outdo o r s Ma r i ne El e ctro n ic s , I n c .
1 2 1 Powe r D r ive
M a n kat o, M N 56 00 1
MINN KOTA CONSUMER
& TECHNICAL SERVICE
MINN KOTA DEALER
& DISTRIBUTOR SERVICE
JOHNSON OUTDOORS INC.
CANADA
P.O. Box 8129
Mankato, MN 56002
Phone (800) 493-6686
Fax (800) 451-0387
121 Power Drive
Mankato, MN 56001
Phone (800) 227-6433
Fax (800) 527-4464
555 Main Street, Suite 241
Racine, WI 53403
Phone (800) 299-2592
Fax (800) 631-6609
4180 Harvester Road
Burlington, Ontario L7L 6B6
Phone (905) 634-0023
Fax (905) 634-0261
Humminbird, Maxxum, Minn Kota, Riptide and Vantage are registered trademarks of Johnson Outdoors Marine Electronics, Inc.
AutoPilot, Bowguard 360°, CrabClaw, Cool Power, CoPilot, DeckHand, DualBeam PLUS, Endura, Fortrex, GlideFit, Grip Glide, i-Pilot,
Maximizer, MicroTouch, Minn Kota Matched Systems, Neptune, PowerDrive, Quiet Power, Terrova, Tilt Twist Tiller, Traxxis, Trim-N-Troll,
Ultimate Power, Vector, Weedless Wedge, Wide Track and 3X are trademarks of Johnson Outdoors Marine Electronics, Inc.
Garmin is a registered trademark of Garmin International Inc.
Lowrance is a registered trademark of Lowrance Electronics Inc.
T-H Marine is a trademark of T-H Marine Supplies, Inc.
WAGO is a registered trademark of WAGO Corporation.
Wall-Nut is a trademark of WAGO Corporation.
Specifications are subject to change without notice.
©2010 All Rights Reserved
Printed in the U.S.A.
m in n kot a m ot o r s.co m
GPS-POWERED MOTORS.
WIRELESS REMOTES.
INTEGRATED SONAR TECHNOLOGY.
YOU COULD ACCUSE US OF MAKING THINGS
A LITTLE TOO EASY. BUT ALL WE CAN DO IS
TAKE YOU TO THE FISH.
IT'S UP TO YOU TO MAKE THEM BITE.
WE JUST THINK YOU SHOULD SPEND MORE
TIME ON THAT, AND LESS TIME STEERING AND
POSITIONING YOUR BOAT. THAT’S WHY WE BUILD
THE SMARTEST, TOUGHEST, MOST INTUITIVE
MOTORS ON THE WATER.
AFTER THAT,
YOU'RE ON YOUR OWN.
CONTENTS
Talon
4
Vantage Transom-Mount
22
Riptide SP Bow-Mount
40
Power Management
58
HOLD YOUR
GROUND.
Advantage Minn Kota
6
Traxxis Transom-Mount
24
Riptide SF Bow-Mount
42
DeckHand Anchor Winches
59
Minn Kota Technologies
8
Endura C2 Transom-Mount
26
Riptide SM Bow-Mount
44
Accessories
60
i-Pilot
10
Pontoon Bow-Mount
28
Riptide SE Bow-Mount
46
Charger Selection Chart
64
INTRODUCING TALON, THE
SHALLOW WATER ANCHOR
THAT COULD ONLY
COME
FROM MINN KOTA®. SEE PAGE 4-5
Terrova Bow-Mount
12
E-Drive Electric Outboard
30
Riptide Transom-Mount
48
Talon Adapter Plate Selection Chart 64
PowerDrive V2 Bow-Mount
14
Advantage Minn Kota — Saltwater
32
Engine Mount Motor
50
Replacement Prop Chart
65
Fortrex Bow-Mount
16
AutoPilot/CoPilot — Saltwater
34
Trim Tabs
52
Trim Tab Product Specifications
65
Maxxum Bow-Mount
18
i-Pilot — Saltwater
36
Trim-N-Troll
54
Shaft Length Specifications
65
Edge Bow-Mount
20
Riptide ST Bow-Mount
38
On-Board Battery Chargers
56
Motor Selection Chart
66
ON THE WEB.
Visit minnkotamotors.com to experience what makes a
Minn Kota® a Minn Kota. You can tour the innovative features
and technologies of each motor, and find your perfect trolling
motor with our exclusive Select a Motor application.
Follow Minn Kota on Facebook, Twitter and
YouTube for exclusive news and updates.
NEW TALON SHALLOW WATER ANCHOR
THE FASTEST, STRONGEST, QUIETEST WAY
TO POSITION YOUR BOAT IN SHALLOW WATER.
GETS THERE.
RUNS QUIET.
Half the battle is hitting your spot precisely and staying there. Talon deploys
quickly and automatically to get you in position, so you can get ready to reel ’em in.
Even with an arsenal of innovative features, Talon is designed to run quiet so
it won’t scare fish.
Fast Deploy.
Talon’s spike deploys faster than the
competition, getting you in position quickly
and keeping you there.
Simple Design.
Built with minimal moving parts and
no hinge points, Talon starts quiet and
stays quiet.
Auto-Drive.
Talon delivers the strongest possible
hold with Auto-Drive, which automatically
powers the spike into the bottom with
three successive hits, using increasing
force on each hit.
Built-In Wave Absorption.
Talon enables your boat to move up or
down without affecting the anchor. It
uses a built-in floating suspension to keep
you locked to the bottom, even in rough
water conditions.
Rugged
Anchoring Spike.
GUARANTEED FOR LIFE!
With composite fiberglass
construction, the
innovative spike on Talon
is designed to withstand
years of abuse with
unmatched reliability.
In addition to an arsenal of speed and power features, we’ve made Talon
easier and less costly to install, maintain and control.
Innovative Design.
Talon’s space-saving, lightweight design
makes it as easy to install as a trolling
motor, with no messy, complicated
hydraulic pumps and hoses.
Versatile Adjustments .
A Minn Kota Quick Release Mounting
Bracket enables Talon to slide up
and down or pivot up to 30˚ to
accommodate any transom angle.
You can also easily remove Talon
when not in use.
Adapter Plates.
For non-direct transom installation,
see page 64 for a full selection of
adapter plates.
T
Rough Water Mode.
For an even stronger hold, activate
Rough Water Mode, which performs
three Auto-Drive sequences at ten
second intervals.
BUILT SMARTER.
PIVO
2X Anchoring Force.
Talon is built with double the force of the
competition, so you can power in for a secure
hold and retract the anchor easily when it’s
time to move.
Two-Stage Deployment.
Talon’s sequential, vertical deployment
moves the spike quickly and quietly. It
causes minimal disruption at the bottom
and doesn’t interfere with your lines.
Noise Dissipation.
The innovative design prevents noise
from being emitted below the water or
through the hull, where the fish can hear it.
3 0˚
Talon doesn’t just anchor quicker, it anchors better. Even in currents and high
winds, Talon holds steady.
STAGE ONE
STAYS THERE.
STAGE TWO
Auto Up/Down.
Deploy Talon by tapping a button on your
wireless remote, so you don’t have to hold it
down and wait.
SLIDES
UP AND DOWN
Standard Wireless Remotes.
Two wireless remotes come standard
to give you push-button control of Talon
from anywhere on the boat.
Rugged Construction.
Talon is built with legendary
Minn Kota toughness and reliability,
and is fully resistant to the corrosive
effects of saltwater.
LED Depth Indicator.
Track anchor depth at a glance, with
LED lights on the unit that quickly
show you how far down you’re
deployed in one foot increments.
Deployment Notification Alarm.
If you turn your engine on while
Talon is deployed, a Deployment
Notification Alarm alerts you that
the anchor is down.
Peace of Mind.
Talon carries a comprehensive
two-year warranty — plus a lifetime
warranty on the spike.
Available Models. (Maximum Depth)
6' 4" White
6' 4" Black
8' 4" White
8' 4" Black
4 5
_`
TALON
HOLD YOUR GROUND.
Boat control and positioning are everything. The quicker and more effectively you can position yourself on
a bank, weedbed or flat, the better your chance of reeling in what you’re after.
Enter the all-new Talon. Our shallow water anchor deploys faster, holds stronger and outperforms competitors
at every turn to change the way you think about boat positioning. It puts you on top of the fish and keeps you
there, and it’s built with the legendary durability, precision and performance of a Minn Kota.
3
3
1
INDESTRUCTIBLE COMPOSITE SHAFT.
UP TO FIVE TIMES LONGER RUN TIME
ON A SINGLE CHARGE.
Every aspect of a Minn Kota motor is
thought out and rethought until it’s good
enough to bear our name. What’s left is
this set of legendary innovations.
For decades, Minn Kota’s Maximizer™ technology has
given anglers the power to stay out on the water longer.
Instead of wasting energy with a constant flow of power,
Digital Maximizer delivers only what’s needed: a precise
amount of power at any setting – along with variable
speed control – that optimizes draw to extend battery
life and reduce damaging heat.
1
GUARANTEED FOR LIFE!
If we could offer a longer guarantee than “lifetime,” we would. Our ultra-high-yield
composite shafts are pound for pound stronger than steel, virtually indestructible
and can flex on impact before returning to their original position. They won’t kink,
break, rust or corrode. Guaranteed.
4
WEEDLESS WEDGE ™ 2.
Only a Minn Kota can push weeds away and take on the thick stuff without batterydraining chopping and hacking. We’ve improved on the legendary Roland Martin
design with swept-back, flared blades for unrelenting, reliable prop performance.
4
2
BOWGUARD 360°™ BREAKAWAY MOUNT.
2
This patented mount breaks away on impact from any
angle, then automatically resets itself. You get uninterrupted
fishing and an extra measure of safety from damaging
your trolling motor or boat. Detaches for added portability
and easy storage. Only from Minn Kota.
5
5
COOL, QUIET POWER.
Nothing runs cooler or more quietly than Minn Kota. Our extra large windings
and commutators dissipate heat, resulting in cooler operation, extended battery
power and longer motor life. Our unique bearing system reduces friction to cut
fish-spooking noise. So quiet they’ll never hear you coming.
6 7
_`
ADVANTAGE MINN KOTA
BETTER THAN IT HAS TO BE.
You don’t think too much about advanced digital microprocessing. Ultra-high-yield composite materials probably don’t dominate
your dinner conversation. But these are just some of the things that work together to make our motors outperform and outlast
any other trolling motor on the water. They’re the result of countless hours of research and testing, and they’re the advantages
that allow a Minn Kota to truly take you “Anywhere. Anytime.”
COPILOT™
AUTOPILOT™
UNIVERSAL SONAR 2
GO REMOTE.
STAY THE COURSE.
GAIN SOME PERSPECTIVE.
Free yourself from the foot pedal and fish from anywhere
on the boat, with the CoPilot™ wireless remote. With
full control of prop on/off, speed and steering at your
fingertips, you’re in total command of your trolling motor.
The compact, intuitive, waterproof remote comes with
a neck lanyard and it also floats.
Point your motor head in the direction you
want to travel. Activate AutoPilot™. Then get
back to fishing. That’s how easy it is to stay
on a heading with AutoPilot.
Step up to the streamlined, fully protected design of Universal
Sonar 2. The transducer and wiring are completely concealed
and protected from the elements, while shielded connectors
virtually eliminate interference. No rigging required. No messy,
exposed wires. Just crystal-clear sonar performance.
CoPilot for Terrova:
For Terrova owners, CoPilot packs an extra punch. A high
speed bypass button lets you hit full speed in an instant,
and you can stay the course at the push of a button with
AutoPilot activation. Add that to the long list of reasons to
own a Terrova.
Its state-of-the-art compass system locks onto a heading,
and keeps you on course while making continuous corrections
for wind, waves and current. And while it’s navigating and
positioning your boat, you’re free to fish.
The view you get is unlike any other, thanks to dual beam technology.* It scans the water
using both 20° and 60° angles to give you an expanded view and better bottom detail.
Also features advanced temperature sensing.
Troll along a current line or over a shelf or ledge.
Just point the motor head where you want to go and
AutoPilot will automatically adjust for wind, waves or
current to pull the boat along the desired line.
Universal Sonar 2 is fully compatible with your favorite
fishfinder. Just use a plug-in accessory adapter (page 60)
to connect to interference-free, fully enclosed sonar
performance.**
Run in place. To hover over schooling fish, adjust the
speed of the motor against wind, waves or current.
AutoPilot will keep your boat headed in the same direction,
allowing you to hover in place over a desired area.
High Speed Bypass (Terrova only)
** 200kHz and 200kHz/83kHz DualBeam PLUS compatible.
AutoPilot On/Off (Terrova only)
Steer Left
Propeller On/Off
Decrease Speed
Increase Speed
Steer Right
Actual Size
Shielded for Added
Peace of Mind.
These shielded cable
connectors virtually
eliminate the possibility
of sonar interference and
they’re waterproof for
extra dependability.
Troll parallel to
the shoreline.
Point the motor at
a distant landmark,
parallel to the shore.
AutoPilot will maintain
your heading until
you choose to change
your course.
60˚
83kHz
Repeat a productive troll.
At the end of a run, rotate the
motor head 180 degrees. AutoPilot
will swing the boat completely
around and take you back along
the same course.
20˚
200kHz
Get Universal Sonar 2 on Fortrex™, Terrova™ and
PowerDrive™ V2 bow-mount motors.
* Available on Humminbird® DualBeam PLUS™ and select
Lowrance® and Garmin® units.
8 9
_`
MINN KOTA
TECHNOLOGIES
The best motors in the world get even better when you equip them with our revolutionary boat control
and sonar technologies. Take a look at the innovations that are changing the way people fish.
WIRELESS GPS TROLLING SYSTEM
CRUISE CONTROL.
i-Pilot’s cruise control function gives you
unparalleled bait presentation, by maintaining
your actual on-the-water speed (in miles per
hour) and allowing you to adjust your speed in
1/10-mile-per-hour increments.
CHECK OUT ALL THE WAYS i-PILOT CAN HELP
YOU CATCH MORE FISH.
™
RECORD A TRACK.
i-Pilot installs simply: just replace
the top of the motor head, activate
your remote and you’re ready to fish.
ADVANCED AUTOPILOT.
A
Simply push the Record button and fish along
your desired course. i-Pilot will store that track
to memory (up to three separate tracks). When you
want to retrace a course, i-Pilot’s Playback functions
will automatically guide your boat along the track.
Advanced AutoPilot uses GPS to take you exactly
to the point you select, not just the bearing you
choose. It’s the difference between a compass
and a GPS unit. Just point the motor in the
direction you want to travel, push a button and
let it take you there with GPS accuracy while
compensating for wind, waves, current and drift.
RECORD A TRACK: i-Pilot can record your track (A to B),
for up to two miles. To retrace your path in either direction,
just press the Track to Start or Track to End buttons.
B
COPILOT.
Control speed, steering, on/off and high-speed bypass – our
legendary CoPilot functions – from your i-Pilot remote. Free
yourself from the foot pedal and fish from anywhere on the boat.
SPOT-LOCK.
THE REMOTE.
Spot-Lock works like an electronic anchor. Choose up
to three separate spots for i-Pilot to remember, and at
the push of a button, it will correct for wind or currents
to hold you in place. Spot-Lock Recall lets you return
to your spot later, from up to a quarter mile away.
i-Pilot’s clear, integrated, backlit LCD
screen delivers instant feedback
on active functions, speed, prop
on/off status, battery power and
GPS signal strength. All encased by
a watertight, gasketed remote that
floats if dropped. Includes lanyard
and carabiner.
5 FT
SPOT-LOCK: Select your spot,
and if you drift more than five
feet away, i-Pilot will trigger your
trolling motor to bring you back.
i-Pilot is available on Terrova and PowerDrive V2 bow-mount
trolling motors either pre-installed or as an add-on accessory.
FEATURES MINN KOTA’S TWO-YEAR WARRANTY
Actual Size
10 11
_`
i-PILOT
THE NAVIGATION REVOLUTION.
It’s simple: the less time you spend steering and positioning your boat, the more fish you can catch.
Enter i-Pilot™, which controls and steers your boat for you using GPS technology. Lock onto a fishing spot
at the push of a button – and stay there. Record a successful path and retrace it later. Set cruise control
for perfect bait presentation. All wireless, all with GPS accuracy, all with the sole purpose of making you
a better angler.
MOTORS
STOW. DEPLOY. REPEAT.
AVAILABLE THRUST LEVELS
SO YOU CAN CATCH YOURS.
80
55
SPECIFICATIONS
CONTROL
ELECTRIC STEER
SHAFT LENGTH
45", 48", 54", 60"
PROP
WEEDLESS WEDGE 2
13
B O W - M O U N T
TERROVA
DESIGNED WITH NO LIMITS,
101
12
TERROVA
Simply depress the handle
on the mount.
Fallaway ramps effortlessly deploy
the motor into the water.
F R E S H W A T E R
Easy in. Easy out. Everyday. That’s the
thought behind Terrova’s innovative
stow/deploy mechanism. The balanced
motor design makes stowing easy,
and a master cut-off switch automatically
turns off the power when stowed.
Available pre-installed
on select models.
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
More power. More innovation. More than enough strength and intelligence to take any obstacle
and put it in its place. With up to 101 lbs of thrust and ingenious technologies like CoPilot, AutoPilot
and i-Pilot, Terrova breaks the mold, so you can fish without limits.
ELECTRIC STEER FOOT PEDAL.
i-PILOT WIRELESS GPS TROLLING SYSTEM.
i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths
and fishing spots on the water, activate cruise control and give you command of
speed, steering and Advanced AutoPilot. Optimize your Terrova with i-Pilot
(available pre-installed or as an add-on accessory) for unprecedented automatic
boat positioning. Learn more on page 10.
Terrova’s waterproof, low-profile foot
pedal lets you take precise control with
less than one degree of steering resolution.
Features IP68 waterproof rating.
AUTOPILOT KEEPS YOU ON COURSE.
Digitally controlled AutoPilot uses a state-of-the-art compass to deliver you on any
bearing you choose. Infinitely variable steering adjustments provide smoother course
corrections and tighter heading accuracy against wind, waves and current. Included on
select models. Also available as an add-on accessory, see page 60.
AutoPilot
“ON”/“OFF”
Momentary/Constant
“ON”/“OFF”
Heel/toe steering
GO REMOTE WITH COPILOT.
Only the Terrova wireless CoPilot accessory lets you activate AutoPilot or reach
maximum power at the push of a button. You can also take control of speed, steering
and on/off command, from anywhere on the boat. For more information, see page 60.
Left steer
Momentary on
Right steer
Infinite speed control
Momentary on
MOTORS
DEPLOY-ASSIST LEVER.
PowerDrive V2’s deploy-assist lever puts you in motion and in pursuit of fish
quickly and easily. Depress the lever to deploy the motor and you’re ready
to go. When it’s time to move, it stows easily and securely – ready for action
whenever you are.
65 55 50
45
B O W - M O U N T
SPECIFICATIONS
CONTROL
ELECTRIC STEER
SHAFT LENGTH
48", 54", 60"
PROP
WEEDLESS WEDGE 2*
POWER PROP*
POWERDRIVE V2
POWERDRIVE
V2
HIGHLY EVOLVED.
70
15
F R E S H W A T E R
AVAILABLE THRUST LEVELS
14
Available pre-installed
on select models.
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
It’s been over 75 years since we introduced our first electric trolling motor. To say the technology has
evolved since then is an understatement. Take PowerDrive V2, with big-time strength and innovative,
ergonomic controls that have made it one of the most trusted names on the water. It’s not merely an
upgrade. It’s an evolutionary leap.
i-PILOT WIRELESS GPS TROLLING SYSTEM.
i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths
and fishing spots on the water, activate cruise control and give you command
of speed, steering and Advanced AutoPilot. Optimize your PowerDrive V2 with
i-Pilot (available pre-installed or as an add-on accessory – replaces the foot pedal)
for unprecedented automatic boat positioning. Learn more on page 10.
ERGONOMICALLY DESIGNED
FOOT PEDAL.
Control speed, steering, and momentary
and constant on/off with PowerDrive V2’s
foot pedal. It features the industry’s
highest IP68 waterproof rating and
an 18' cord. For optional foot pedals,
see page 61.
Speed control
Right
GO REMOTE WITH COPILOT.
Momentary/Constant
“ON” switch
Enjoy the freedom to control speed and steering from anywhere on the boat with
our wireless CoPilot remote. The compact, innovative accessory can be attached to
a neck lanyard for easy access. For more information, see page 60.
Momentary button
High-impact
composite material
Left
AUTOPILOT: READY. SET. FISH.
Point the motor in the direction you want to go, then activate the AutoPilot button.
It’s that easy. AutoPilot’s compass automatically keeps you on your bearing, even
against wind and waves.
MOTORS
THE MONO-ARM: YOUR SECRET WEAPON.
Sometimes, the simplest solution is best. In this case, it’s a revolution. Fortrex’s
innovative Mono-Arm Design features an extruded, anodized aluminum, structural
beam that operates with no metal-to-metal contact and 75% less torsion. A single
hinge point and rear pivot bearing with 20% more surface area deliver less wear,
longer life and quieter operation than traditional motor mounts.
B O W - M O U N T
IN SOLITARY CONFINEMENT.
80
FORTREX
FORTREX
THE ONLY MOTOR WE’VE EVER KEPT
101
17
F R E S H W A T E R
AVAILABLE THRUST LEVELS
16
SPECIFICATIONS
CONTROL
CABLE STEER
SHAFT LENGTH
45", 52", 62"
PROP
WEEDLESS WEDGE 2
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
Why’d we leave Fortrex’s solid, extruded aluminum arm exposed? So everyone else on the water knows
what they’re up against: the most ruthless motor we’ve ever unleashed. With fewer moving parts, tighter
tolerances and less give, Fortrex is the beefiest, meanest, quietest motor ever. Consider yourself warned.
ILLUMINATED
DIRECTIONAL INDICATOR.
COUNTER-TENSION STABILIZER (CTS).
CTS uses an integrated spring that applies force whether the motor’s stowed or deployed. On the
water, that translates to a motor with no play, no give, reduced steering torque and silent operation.
Fortrex’s easy-to-read, illuminated
directional indicator leaves no doubt
about where you’re headed.
CABLE STEER FOOT PEDAL .
Speed control
High-impact composite material
LIFT-ASSIST EASES STOW AND DEPLOY.
Fortrex’s patented Lift-Assist design cuts the weight of stow and deploy in half,
making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen
gas-charged spring.
Momentary button
Side-mounted
Momentary/
Constant “ON”
switch
Heel block
REMOVABLE BOWGUARD 360°.
Lifting the motor and bowguard off of the mount is now even easier on Fortrex –
just remove a single cap screw. The patented Bowguard 360°™ also features a dual
bearing system that eliminates noise and allows for improved breakaways from
any angle.
MOTORS
BOWGUARD 360°.
Our patented Bowguard 360° breaks away on impact from any angle, then
automatically resets itself. You get uninterrupted fishing and an extra safeguard
from damaging your trolling motor or boat. Detaches for added convenience.
80
70
55
B O W - M O U N T
SPECIFICATIONS
CONTROL
CABLE STEER/HAND CONTROL*
SHAFT LENGTH
42", 52"
PROP
WEEDLESS WEDGE 2
MAXXUM
MAXXUM
WHAT WE’RE MADE OF.
101
19
F R E S H W A T E R
AVAILABLE THRUST LEVELS
18
Available on
select models.
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES*
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
You’re the first one on the water. And the last one off. That drive and determination are exactly what we
built into Maxxum®. We’ve fortified the motor head with a new hybrid composite material that’s five times
stronger than before. And both our foot control and hand control models feature tournament-tested power
and innovative fishing features that were made with one purpose: keeping up with people like you.
WIRED TO THE WATER.
DIGITAL MAXIMIZER ™.
By controlling the draw of power at variable speeds,
Digital Maximizer lets you stay on the water up to five
times longer on a single charge.
Maxxum has a foot pedal
with ultra-responsive steering
and an ergonomic design. There’s
more room for your foot, and more
precise speed control.
Speed control
High-impact composite material
Momentary button
ILLUMINATED DIRECTIONAL INDICATOR.
Maxxum foot control models feature an easy-to-read, illuminated directional
indicator. It delivers a clear reading in any light, so you know right where
you’re headed.
Side-mounted
Momentary/
Constant “ON”
switch
Heel block
MAXXUM ® HAND CONTROL.
The Maxxum Hand Control motor features a comfortable
Tilt/Extend Tiller handle that can both tilt (up to 45°) and
extend (up to 6") for maximum control. And the motor head’s
digital battery indicator lets you know just how much time
you have left on the water.
MOTORS
ROCK-SOLID MOUNT.
Tempered, marine-grade extruded aluminum provides an ultra-strong, lightweight
mount. A positive rear stow latch provides rock-solid stowing for rough water runs and
trailering, while a Latch & Door design makes removing your motor easy.
20
21
F R E S H W A T E R
EDGE
AVAILABLE THRUST LEVELS
55
45
B O W - M O U N T
EDGE
TAKE IT TO THE LIMIT.
70
SPECIFICATIONS
CONTROL
CABLE STEER/HAND CONTROL*
SHAFT LENGTH
36", 45", 50", 52"
PROP
WEEDLESS WEDGE 2*
POWER PROP*
minnkotamotors.com
COMPOSITE SHAFT
YES
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
It’s just a trolling motor, right? Tell that to the guy who just lost a day of fishing fixing his cheap knock-off
after it bowed down to a weed bed. Your motor shouldn’t get in your way, it should get things out of
your way. That’s the philosophy behind Edge, our no-nonsense, nose-to-the-grindstone, everyday
powerhouse with relentless durability.
CABLE STEER FOOT PEDAL .
INDESTRUCTIBLE COMPOSITE SHAFT.
GUARANTEED FOR LIFE!
Pound for pound, our composite shaft is stronger than steel. It flexes on impact
and won’t break, kink or corrode. That’s why we’re confident enough to make it
the only trolling motor shaft that’s guaranteed for life.
Get wired to the water with Edge’s
foot pedal. It features ultra-responsive
steering and an ergonomic design,
with more room for your foot, and more
precise speed control.
Speed control
High-impact composite material
Momentary button
DIRECTIONAL INDICATOR.
An easy-to-read directional indicator is built into the top of the motor head on
Edge foot control models. You’ll spend more time scanning the water and less
time worrying about your motor.
Side-mounted
Momentary/
Constant “ON”
switch
Heel block
EDGE HAND CONTROL MOTOR.
Our 55- and 45-lb Edge models feature our Tilt Twist Tiller™.
The natural ergonomic grip gives you the ultimate in hands-on
control for speed and steering. Shaft lengths in 45" and 52".
MOTORS
22
T R A N S O M - M O U N T
minnkotamotors.com
BREAKAWAY MOUNT.
BACKTROLL IN AN INSTANT.
AVAILABLE THRUST LEVELS
101
80
When the fishing calls for backtrolling, Vantage responds. Simply lift the
directional indicator, rotate it 180° and set it back in place. It’s that fast and
easy to change direction.
Unlike conventional transom mounts,
the Vantage mounting system
breaks away on impact. It’s easy to
reset and protects your motor from
unseen hazards.
SPECIFICATIONS
MOUNT
BREAKAWAY
180˚
180˚
With 4:1 articulated steering, rotating the lower unit 180° is as easy as moving
the Tilt/Extend Tiller just 45°. Besides delivering maximum results with minimum
effort, it stays out of the way of your outboard or kicker motor.
CONTROL
TILT/EXTEND TILLER
SHAFT LENGTH
VARIABLE
MORE RESPONSE WITH LESS EFFORT.
45˚
45˚
PROP
WEEDLESS WEDGE 2
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
POWER TRIM/STOW AND DEPLOY — AUTOMATICALLY EASY.
When depth and fishing conditions change, all you have to do is push a button
to raise and lower the motor. It also automatically stows the motor at the end
of the day or when you’re on the move.
DIGITAL MAXIMIZER.
Digital Maximizer provides up to
five times longer run time on a single
charge. By controlling the draw
of power at variable speeds, it
eliminates wasted energy, extends
battery life and gives you more time
on the water.
VANTAGE
F R E S H W A T E R
VANTAGE
INSTANT GRATIFICATION.
Get what you want, when you want it. With Vantage®, we’ve made it easier than ever to take control of
stow and deploy, steering, and backtrolling. And with a convenient Tilt/Extend Tiller that extends to a
full 31", effortless command is in your grasp.
23
MOTORS
24
T R A N S O M - M O U N T
minnkotamotors.com
ONE-HAND STOW.
QUICK-LOCK CAM DEPTH ADJUSTER.
Change depths simply and securely with Traxxis’ Quick-Lock cam adjuster. It makes
depth adjustment simple and locks in tight to keep your motor right where you
want it.
AVAILABLE THRUST LEVELS
80
70
55
45
SPECIFICATIONS
MOUNT
ONE-HAND STOW
Available only on
variable speed models.
CONTROL
TILT/EXTEND TILLER
SHAFT LENGTH
36", 42"
Available on
select models.
VERSATILE STEERING TENSION CONTROL.
The innovative collar above the Traxxis mount allows you to adjust steering tension
to your desired level. You can keep it loose for effortless steering or tighten it down to
keep Traxxis in place, allowing for true vertical stowing.
PROP
WEEDLES WEDGE 2*
POWER PROP*
A TWIST ON HAND CONTROL.
COMPOSITE SHAFT
YES
Traxxis’ innovative, comfortable Tilt/Extend Tiller handle can
both tilt (up to 45°) and extend (up to 6") for maximum control
to fit any style of fishing. It even includes a convenient digital
battery indicator located right on the motor head.
DIGITAL MAXIMIZER
YES*
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
Traxxis’ remarkably simple, onehand stow mechanism gets the
motor in and out of the water in no
time. Just pull up and forward to
stow the motor. Then when it’s time
to go, use the easy-access thumb
release to deploy Traxxis into any
one of ten different positions.
TRAXXIS
F R E S H W A T E R
TRAXXIS
SAY ‘GOODBYE’ TO THE STATUS QUO.
When the walleye are biting, you’d better be on the spot. All the well-positioned casts in the world don’t
mean a thing if you can’t stay on the fish. That’s why every facet of the Traxxis™ was engineered to keep you
in the game, no matter where the game takes you. It’s the ultimate in transom-mount trolling performance.
25
MOTORS
26
T R A N S O M - M O U N T
minnkotamotors.com
AVAILABLE THRUST LEVELS
ENDURA C2 55 50 45
WATERFOWL 55 44
40
30
LEVER LOCK BRACKET.
WATERFOWL EDITION.
Our Lever Lock Bracket delivers a rock-solid mount that’s stronger than
conventional brackets. Special composite materials resist flexing, warping
and UV damage.
Built to keep you in the action when
the shooting heats up, our Waterfowl
Edition is available in 55- or 44-lb
thrust levels. It features a Tilt Twist
Tiller, indestructible composite shaft
and Power Prop.
SPECIFICATIONS
MOUNT
LEVER LOCK BRACKET
CONTROL
TELESCOPING HANDLE*
HAND CONTROL*
INDESTRUCTIBLE COMPOSITE SHAFT.
GUARANTEED FOR LIFE!
Pound for pound, our composite shaft is stronger than steel. It flexes on impact
and will not break, kink or corrode. We’re the only ones who trust our trolling
motor shaft enough to guarantee it for life.
SHAFT LENGTH
30", 36", 42"
PROP
POWER PROP
COMPOSITE SHAFT
YES
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
TELESCOPING HANDLE.
Endura C2 features an ergonomic, six-inch telescoping handle
for the most comfortable, convenient steering available.
TROLLING MOTOR
POWER CENTER.
Ideal for small boat, transom
applications. Protects battery and
allows connection with trolling motor
leads without opening box. Displays
current “state of charge.” See page 61.
ENDURA C2
F R E S H W A T E R
ENDURA
C2
YOU CAN’T BEAT A TRUE ORIGINAL.
While others try to imitate it, we innovate it. Endura™ C2 is the legendary performer that’s built to explore,
built to last and backed up with our two-year warranty. It’s the ultimate coming together of form and
function, in a package that puts you on the water day after day, year after year – like no other.
27
MOTORS
ALUMINUM QUICK RELEASE BRACKET.
Quickly, easily remove your PowerDrive V2 Pontoon motor with our aluminum
bracket. It allows for maximum versatility and features a quiet, secure locking
system. Standard on PowerDrive V2 Pontoon models.
28
POWERDRIVE V2
HAND CONTROL
68 54
70 55
B O W - M O U N T
SPECIFICATIONS
CONTROL
ELECTRIC STEER | HAND CONTROL
SHAFT LENGTH
PDV2 = 48" | HC = 52"
PROP
WEEDLESS WEDGE 2
i-Pilot compatible
with PowerDrive V2
Pontoon models.
Available on Pontoon
Hand Control
models only.
minnkotamotors.com
COMPOSITE SHAFT
YES
DIGITAL MAXIMIZER
PDV2 = YES | HC = NO
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
Harness the storied power of a Minn Kota trolling motor for your next cruise around the lake. PowerDrive V2
or Hand Control models give you quiet, steady, all-day performance. And with quick and easy mounting, you
get a motor that’s built to let you sit back and appreciate a perfect day on the lake.
GO REMOTE WITH COPILOT.
On our PowerDrive V2 Pontoon model, you can control speed, steering and
on/off command from the palm of your hand. The compact, wireless CoPilot
remote accessory allows you to navigate from anywhere.
PONTOON
ENJOY THE RIDE.
PONTOON HAND
CONTROL MOTOR.
ERGONOMICALLY DESIGNED FOOT PEDAL.
On our PowerDrive V2 Pontoon model, you can control speed, steering, and
momentary and constant on/off with our ergonomic foot pedal. It features the
industry’s highest IP68 waterproof rating and an 18' cord. For the optional
wireless foot pedal, see page 61.
DECKHAND ™ PONTOON.
Raise and lower the anchor at the touch of a button with the DeckHand™
Pontoon. It includes a DeckHand 40 remote switch for easy operation from
anywhere on the boat.
Precisely, comfortably control speed
and steering with the Hand Control
motor's Tilt Twist Tiller. Available in
70- and 55-lb thrust levels.
Also features a compact mount to free
up more deck space. Compatible with
our Quick Release Brackets (page 61)
and uses a Latch & Door design for easy
depth adjustment and motor removal.
PONTOON
F R E S H W A T E R
AVAILABLE THRUST LEVELS
29
MOTORS
ELECTRONIC THROTTLE CONTROL FOR FINGERTIP RESPONSE.
The ultra-responsive throttle lever has forward/neutral/reverse positions
and push-button tilt up/down. Mounts either on the binnacle or side mount at
the cockpit. Features key switch for added safety.
E-DRIVE
O U T B O A R D
A DAY ON THE LAKE.
31
E L E C T R I C
E-DRIVE
THERE’S NOTHING LIKE
AVAILABLE ELECTRIC
OUTBOARD HORSEPOWER
30
2 HP
SPECIFICATIONS
MOUNT
BOLT-ON TRANSOM
CLAMP-ON TRANSOM*
CONTROL
BOLT-ON = OUTBOARD CABLE LINKAGE
CLAMP-ON = TILT TILLER
SHAFT LENGTH
20"
* Not rated for kicker motor
application on gas engine
powered fishing boats.
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
There’s no better way to enjoy the lake than with Minn Kota’s powerful E-Drive Electric Outboard motor.
On lakes with gasoline restrictions, the quiet 2 hp power plant will move a full-size pontoon boat up to
5 mph with no fumes, no emissions and no messy gasoline. Quiet. Clean. Built to run up to 2 hours at 100%
on a single charge. Features a special tilt-lock mechanism for safe and secure trailering.
MINN KOTA ACTUATORS.
A custom 12V DC motor powers our intelligently designed actuator on our E-Drive
motors. It operates smoothly, quietly and dependably, and also features the
industry’s highest IP68 waterproof rating.
TILT GAUGE.
REALTIME DIGITAL BATTERY GAUGE.
Dash-mounted tilt gauge provides an
instant readout of motor position.
Not available on E-Drive Tiller model.
E-Drive features a back-lit Realtime Digital Battery Gauge, giving you an
instant reading of how many hours of runtime you have remaining at
your current speed. Also features a fuel gauge showing battery condition,
as well as throttle power level.
E-DRIVE TILLER MOTOR.
On gasoline-restricted lakes, the E-Drive Tilt Tiller motor provides primary
propulsion with a comfortable, ergonomic Tilt Tiller. Features an easy-to-see,
realtime battery gauge on the head and a clamp-on transom bracket that
mounts easily to most aluminum V-hull boats.
E-DRIVE TILLER.
Exclusive Tilt Tiller provides
comfortable and convenient control.
UP TO FIVE TIMES LONGER
RUN TIME ON A SINGLE CHARGE.
5-mil polyester paint
ADVANCED CORROSION PROTECTION.
Riptide® motors are impervious to saltwater’s corrosive effects, thanks to premium-grade marine alloys and
aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated
with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil polyester,
powder coat paint. When it’s all done, you’re left with unequaled corrosion protection.
Zinc powder primer
Anodized or dichromate armor plating
Premium marine alloy cleaned
with 7-step process
SILENT OPERATION. COOL POWER.
Nothing runs cooler or more quietly than
Minn Kota. Our extra large windings
and commutators dissipate heat, resulting
in cooler operation, extended battery power
and longer motor life. Our unique bearing
system reduces friction to cut fish-spooking
noise. So quiet they’ll never hear you coming.
Stay on the water longer with Digital Maximizer.
Instead of wasting energy with a constant flow
of power, Digital Maximizer delivers only what’s
needed: a precise amount of power at any setting –
along with variable speed control – that optimizes
draw to extend battery life and reduce damaging heat.
FULLY ENCAPSULATED
ELECTRONICS.
Marine-grade urethane fully encapsulates
Riptide control boards to protect the 2
electronic circuitry. Also, all electrical
connections are sealed with liquid-tight
heat shrink tubing to form an impregnable
barrier against saltwater.
1
1
2
INDESTRUCTIBLE
COMPOSITE SHAFT.
Minn Kota’s indestructible composite
shaft is impervious to the corrosive
effects of saltwater. Pound for pound
stronger than stainless steel, will not break,
kink or corrode, and does not contribute to
galvanic corrosion. Guaranteed for life!
32 33
_`
RIPTIDE ST
RIPTIDE SP
RIPTIDE SF
RIPTIDE SM
RIPTIDE SE
RIPTIDE TRANSOM
Effortless stow/deploy
and wireless control put
you in command.
Ergonomically designed
features for better control,
with wireless navigation.
A revolutionary
mount for the saltwater
powerhouse.
The classic Minn Kota
saltwater performer, with
legendary ease of use.
A compact mount lets you
add a trolling motor to
smaller technical skiffs.
Our transom-mount
saltwater beast never
backs down.
ADVANTAGE MINN KOTA
SALTWATER DOESN’T STAND A CHANCE.
We’ve stacked the deck against saltwater. Each component is saltwater tested and fortified
with advanced processes and materials to resist corrosion. Whether you’re sightin’ snook
from the platform or trolling for reds along the mangroves, the last thing you need is saltwater
getting in your way. With Riptide, it never will.
AUTOPILOT: STAY THE COURSE.
Constantly repositioning and redirecting your boat wastes
valuable fishing time. That’s why our patented AutoPilot system
(available on Riptide ST and SP motors) does the hard work of
navigating for you. Lock AutoPilot onto your desired heading,
and let it automatically and continuously make adjustments to
keep your boat moving in the right direction.
Along current lines, or over shelves
or ledges, AutoPilot will make
automatic adjustments against wind,
waves or current to continue to pull
your boat in the desired direction.
WORKS HARD SO YOU DON’T HAVE TO.
Run “in place” over schooling fish,
by using AutoPilot to adjust your
motor against wind, waves or
current – keeping you in prime
position to reel ’em in.
AutoPilot’s state-of-the-art compass system locks onto a particular heading and
automatically and continuously corrects itself against wind, waves and current to keep
your boat moving in the right direction. Whether you’re picking your way through the
mangroves or sight fishing on the flats, AutoPilot lets you spend less time worrying about
navigating and more time focusing on reeling in the reds.
Troll parallel to the shoreline by
activating AutoPilot to maintain
your heading until you choose to
change it.
SIMPLICITY AT ITS BEST.
To use AutoPilot, just point the motor head in the direction you want to travel and let it take
over. It uses a state-of-the-art compass system that automatically and intelligently steers
your boat to keep you right in the strike zone.
Repeat a productive troll by rotating
the motor 180° at the end of your
run. AutoPilot will swing the boat
around and retrace your path.
COPILOT: THE WORLD AT YOUR FINGERTIPS.
There’s no need to clutter up you deck with a foot pedal when you arm yourself with the CoPilot remote.
CoPilot gives you the freedom to fish from anywhere on the boat – even the platform – and allows you to
control on/off, speed and steering – all from the palm of your hand. Standard on Riptide ST and SP.
RIPTIDE ST COPILOT.
GO REMOTE.
CoPilot’s remote looks like a car’s keyless entry system – and it’s just as easy to use. The handheld,
wireless remote is conveniently attached to a neck lanyard (included) for easy access, and the remote
is completely waterproof and floats.
High Speed Bypass (Riptide ST only)
AutoPilot On/Off (Riptide ST only)
In addition to being the most
relentless saltwater motor on
the market, Riptide ST uses a
CoPilot remote with two exclusive
features. The high speed bypass
button lets you hit full speed in an
instant, and you can also stay
the course at the push of a
button with AutoPilot activation.
Steer Left
Propeller On/Off
Decrease Speed
Increase Speed
Steer Right
Actual Size
34 35
_`
AUTOPILOT & COPILOT
TOTAL NAVIGATION AT THE PUSH OF A BUTTON.
Getting where you want to go is easy when you let our exclusive AutoPilot and CoPilot take over. AutoPilot locks
on to a heading and stays on course with unmatched precision, even in the face of heavy waves, riptides or currents.
Our CoPilot remote gives you fingertip command from anywhere on the boat. We never run out of ways to help you
tame saltwater – the most corrosion-resistant motors on the water are also the easiest to control.
WIRELESS GPS TROLLING SYSTEM
CRUISE CONTROL.
i-Pilot’s cruise control function gives you
unparalleled bait presentation, by maintaining
your actual on-the-water speed (in miles per
hour) and allowing you to adjust your speed in
1/10-mile-per-hour increments.
HERE’S HOW i-PILOT MAKES YOU
A BETTER FISHERMAN.
RECORD A TRACK.
i-Pilot installs simply: just replace
the top of the motor head, activate
your remote and you’re ready to fish.
ADVANCED AUTOPILOT.
A
Advanced AutoPilot uses GPS to take you
exactly to the point you select, not just the
bearing you choose. It’s the difference between
a compass and a GPS unit. Just point the motor
in the direction you want to travel, push a button
and let it take you there with GPS accuracy while
compensating for wind, waves, current and drift.
Simply push the Record button and fish along
your desired course. i-Pilot will store that track to
memory (up to three separate tracks). When you
want to retrace a course, i-Pilot’s Playback functions
will automatically guide your boat along the track.
RECORD A TRACK: i-Pilot can record your track (A to B),
for up to two miles. To retrace your path in either direction,
just press the Track to Start or Track to End buttons.
B
COPILOT.
Control speed, steering, on/off and high-speed bypass – our
legendary CoPilot functions – from your i-Pilot remote. Free
yourself from the foot pedal and fish from anywhere on the boat.
SPOT-LOCK.
THE REMOTE.
Spot-Lock works like an electronic anchor. Choose up
to three separate spots for i-Pilot to remember, and at
the push of a button, it will correct for wind or currents
to hold you in place. Spot-Lock Recall lets you return
to your spot later, from up to a quarter mile away.
i-Pilot’s clear, integrated, backlit LCD
screen delivers instant feedback
on active functions, speed, prop
on/off status, battery power and
GPS signal strength. All encased by
a watertight, gasketed remote that
floats if dropped. Includes lanyard
and carabiner.
5 FT
SPOT-LOCK: Select your spot,
and if you drift more than five
feet away, i-Pilot will trigger your
trolling motor to bring you back.
i-Pilot is available on Riptide ST and Riptide SP bow-mount
trolling motors either pre-installed or as an add-on accessory.
FEATURES MINN KOTA’S TWO-YEAR WARRANTY
Actual Size
36 37
_`
i-PILOT
THE NAVIGATION REVOLUTION.
Don’t waste another minute positioning your boat. i-Pilot uses GPS technology to control your trolling motor
for you so you can focus on fishing. It can lock onto a productive fishing spot and keep you there, remember
a successful path, optimize your bait presentation with cruise control, and more. All with wireless control,
GPS accuracy and the mission of making you better at what you love to do: catch fish.
MOTORS
STOW. DEPLOY. REPEAT.
Easy in. Easy out. Everyday. That’s the
thought behind Riptide ST’s innovative
stow/deploy mechanism. The balanced
motor design makes stowing easy, and a
master cutoff switch automatically turns
off the power when stowed.
Simply depress the handle
on the mount.
Fallaway ramps effortlessly deploy
the motor into the water.
38
80
55
B O W - M O U N T
RIPTIDE
ST
DROP IN UNEXPECTEDLY.
101
SPECIFICATIONS
CONTROL
WIRELESS COPILOT
SHAFT LENGTH
48", 54", 60"
PROP
WEEDLESS WEDGE 2
Available pre-installed
on select models.
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
We put Riptide ST to the test, because we know you will. You need a motor that runs with a combination of
stealth silence and unrelenting toughness. One that won’t spook fish, or back down from even the most
extreme conditions. We know saltwater anglers never turn down a challenge. As it turns out, neither do we.
DIGITAL MAXIMIZER.
i-PILOT WIRELESS GPS TROLLING SYSTEM.
i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths
and fishing spots on the water, activate cruise control, and give you command of
speed, steering and Advanced AutoPilot. Optimize your Riptide ST with i-Pilot
(available pre-installed or as an add-on accessory) for unprecedented automatic boat
positioning. Learn more on page 36.
Up to five times longer run time
on a single charge.
OPTIONAL FOOT PEDAL.
DIGITALLY CONTROLLED AUTOPILOT.
Just point the motor where you want to go, and let AutoPilot take you there with
unheard-of accuracy. Infinitely variable steering adjustments provide smoother course
corrections and tighter heading accuracy. Included on select models. Also available as
an accessory, see page 60.
AutoPilot
“ON”/“OFF”
Momentary/Constant
“ON”/“OFF”
Heel/toe steering
GO REMOTE WITH STANDARD COPILOT.
Left steer
Take total control of Riptide ST, from anywhere on the boat. The ST wireless CoPilot
remote gives you the unique abilities to activate AutoPilot or instantly reach maximum
power. And it features classic CoPilot controls like speed, steering and on/off
command. It’s the only remote that can handle a motor this powerful.
Momentary on
Right steer
Infinite speed control
Momentary on
RIPTIDE ST
S A L T W A T E R
AVAILABLE THRUST LEVELS
39
MOTORS
DEPLOY-ASSIST LEVER.
Riptide SP’s deploy-assist lever puts you in motion and in pursuit of fish quickly and
easily. When you depress the lever, the motor deploys and you’re ready to go. When
it’s time to move, it stows easily and securely – ready for action whenever you are.
55
RIPTIDE SP
B O W - M O U N T
RIPTIDE
SP
THE POWER TO BE COUNTED ON.
70
41
S A L T W A T E R
AVAILABLE THRUST LEVELS
40
SPECIFICATIONS
CONTROL
WIRELESS COPILOT
SHAFT LENGTH
48", 54"
PROP
WEEDLESS WEDGE 2
Available pre-installed
on select models.
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
CoPilot wireless control comes standard. AutoPilot delivers you to any heading you choose.
Easy stow and deploy. Advanced corrosion protection. Riptide SP is saltwater-engineered and
designed to keep you in position, on course and focused on what counts: reeling in more fish.
DIGITAL MAXIMIZER.
i-PILOT WIRELESS GPS TROLLING SYSTEM.
i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths
and fishing spots on the water, activate cruise control, and give you command of
speed, steering and Advanced AutoPilot. Optimize your Riptide SP with i-Pilot
(available pre-installed or as an add-on accessory) for unprecedented automatic
boat positioning. Learn more on page 36.
Up to five times longer run time
on a single charge.
OPTIONAL FOOT PEDAL.*
Speed control
Momentary/Constant
“ON” switch
Right
Momentary button
AUTOPILOT: READY. SET. FISH.
Point the motor in the direction you want to go, then activate the AutoPilot button.
It’s that easy. AutoPilot’s compass automatically keeps you on your bearing, even
through rough conditions.
High-impact
composite material
Left
GO REMOTE WITH STANDARD COPILOT.
Control speed and steering from anywhere on the boat with our wireless remote.
It comes standard on Riptide SP. For more information, see page 35.
*Not compatible with i-Pilot.
MOTORS
THE REVOLUTIONARY MONO ARM.
Sometimes, the simplest solution is best. In this case, it’s a revolution. Riptide SF’s
innovative Mono-Arm Design features an extruded, anodized aluminum, structural
beam that operates with no metal-to-metal contact and 75% less torsion. A single
hinge point and rear pivot bearing with 20% more surface area deliver less wear,
longer life and quieter operation than traditional motor mounts.
42
80
B O W - M O U N T
RIPTIDE
SF
THE ASSAULT ON SALT.
101
SPECIFICATIONS
CONTROL
HAND CONTROL
SHAFT LENGTH
52", 62"
PROP
WEEDLESS WEDGE 2
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart
on pages 66-67.
Arm yourself with the ultimate weapon against saltwater. Riptide SF features fewer moving parts, tighter
tolerances and our revolutionary Mono Arm for unwavering toughness. While features like an easy-to-use
cam-lock depth adjuster make day-to-day operation easier, SF doesn’t give up an ounce of power, silence
or rugged reliability. It’s everything you need to put the destructive effect of saltwater in its place.
DIGITAL MAXIMIZER.
COUNTER-TENSION STABILIZER (CTS).
Up to five times longer run time
on a single charge.
CTS uses an integrated spring that applies force whether the motor’s stowed or deployed. On the
water, that translates to a motor with no play, no give, reduced steering torque and silent operation.
A NEW TWIST ON
HAND CONTROL.
LIFT-ASSIST EASES STOW AND DEPLOY.
Riptide SF’s patented Lift-Assist design cuts the weight of stow and deploy in half,
making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen
gas-charged spring.
REMOVABLE BOWGUARD 360°.
Lifting the motor and bowguard off of the mount is now even easier on SF – just
remove a single cap screw. The patented Bowguard 360° also features a dual
bearing system that eliminates noise and allows for improved breakaways from
any angle.
Riptide SF’s ergonomically contoured
Tilt/Extend Tiller handle can both tilt
(up to 45°) and extend (up to 6") to
fit any style of fishing, and it tilts
downward for easy storage. A
convenient digital battery indicator
is located right on the motor head.
RIPTIDE SF
S A L T W A T E R
AVAILABLE THRUST LEVELS
43
MOTORS
A TWIST ON HAND CONTROL.
Riptide SM’s ergonomically contoured Tilt/Extend Tiller handle can both
tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts
downward for easy storage. A convenient digital battery indicator is
located right on the motor head.
44
80
70
55
B O W - M O U N T
RIPTIDE
SM
SALTWATER’S NATURAL ENEMY.
101
SPECIFICATIONS
CONTROL
HAND CONTROL
SHAFT LENGTH
42", 52", 62"
Available on
select models.
PROP
WEEDLESS WEDGE 2
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES*
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
Precision maneuverability. Accurate bait presentation. Meticulous speed control. You count on your trolling
motor for a lot. And along the way, it has to fight corrosion, run quietly and perform with flawless reliability.
Riptide SM is the trusted powerhouse that meets those challenges head on, keeping you in position to make
the catch of the day, every day.
DIGITAL MAXIMIZER.
BOWGUARD 360°.
Up to five times longer run time
on a single charge.
The patented Bowguard 360° mounting system features a heavy-duty, saltwaterengineered, corrosion-resistant stainless steel spring. It enables the mount to break
away on impact from any direction, then automatically resets itself, protecting the
motor and bow of boat from hidden obstacles. Detaches for added convenience.
Available on select models.
INDESTRUCTIBLE
COMPOSITE SHAFT.
LATCH AND DOOR.
Latch and Door models feature non-binding nylon inserts and anti-seize lubricant
for a lifetime of trouble-free use. Removes quickly and easily for safe storage.
Available on select models.
QUICK-LOCK CAM DEPTH ADJUSTER.
Change depths simply and securely with Riptide SM’s Quick-Lock cam adjuster.
It makes depth adjustment simple and locks in tight to keep your motor right where
you want it.
GUARANTEED FOR LIFE!
Pound for pound, SM’s composite
shaft is stronger than steel. It flexes on
impact and won’t break, kink or corrode.
That’s why we’re confident enough to
make it the only trolling motor shaft
that’s guaranteed for life.
RIPTIDE SM
S A L T W A T E R
AVAILABLE THRUST LEVELS
45
MOTORS
A TWIST ON HAND CONTROL.
Riptide SE’s ergonomically contoured Tilt/Extend Tiller handle can both
tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts
downward for easy storage. A convenient digital battery indicator is
located right on the motor head.
46
55
B O W - M O U N T
RIPTIDE
SE
DON’T LET THE SIZE FOOL YOU.
70
SPECIFICATIONS
CONTROL
HAND CONTROL
SHAFT LENGTH
52"
PROP
WEEDLESS WEDGE 2
COMPOSITE SHAFT
YES
minnkotamotors.com
DIGITAL MAXIMIZER
YES
COOL, QUIET POWER
YES
See motor selection chart on pages 66-67.
With a compact mount that delivers in the clutch, Riptide SE lets you take advantage of Minn Kota’s trusted
saltwater performance without sacrificing valuable deck space. Perfect for technical skiffs and flats boats,
SE proves time and time again that bigger isn’t always better.
DIGITAL MAXIMIZER.
ROCK-SOLID MOUNT.
Up to five times longer run time
on a single charge.
Riptide SE’s ultra-strong, lightweight mount features a smaller footprint and
tempered, marine-grade extruded aluminum construction. It stows securely in
rough water with its positive rear stow latch; while a Latch & Door design
makes removing your motor easy.
FIGHTS GALVANIC
CORROSION.
QUICK-LOCK CAM DEPTH ADJUSTER.
Change depths simply and securely with Riptide SE’s Quick-Lock cam adjuster.
It makes depth adjustment simple and locks in tight to keep your motor right where
you want it.
INDESTRUCTIBLE COMPOSITE SHAFT.
GUARANTEED FOR LIFE!
Pound for pound, SE’s composite shaft is stronger than steel. It flexes on impact
and won’t break, kink or corrode. That’s why we’re confident enough to make it the
only trolling motor shaft that’s guaranteed for life.
Galvanic corrosion occurs when two
dissimilar metals come into electrical
contact through saltwater. Riptide
fights back with a patented sacrificial
zinc anode, a composite shaft and
properly balanced materials that are
close in electrical potential. The result
is a motor that’s completely protected
from saltwater’s destructive forces.
RIPTIDE SE
S A L T W A T E R
AVAILABLE THRUST LEVELS
47
MOTORS
48
T R A N S O M - M O U N T
minnkotamotors.com
ONE-HAND STOW.
QUICK-LOCK CAM DEPTH ADJUSTER.
AVAILABLE THRUST LEVELS
101
80
55
50
Change depths simply and securely with Riptide Transom’s Quick-Lock cam
adjuster. It makes depth adjustment simple and locks in tight to keep your motor
right where you want it.
45
SPECIFICATIONS
MOUNT
ONE-HAND STOW
Available only on
variable speed models.
CONTROL
HAND CONTROL
SHAFT LENGTH
36", 42", 52"
Available on
select models.
VERSATILE STEERING TENSION CONTROL.
The innovative collar above the Riptide mount allows you to adjust steering tension
to your desired level. You can keep it loose for effortless steering or tighten it down
to keep Riptide in place, allowing for true vertical stowing.
PROP
WEEDLESS WEDGE 2*
POWER PROP*
A TWIST ON HAND CONTROL.
COMPOSITE SHAFT
YES
Riptide’s ergonomically contoured Tilt/Extend Tiller handle
can both tilt (up to 45°) and extend (up to 6") to fit any
style of fishing, and it tilts downward for easy storage.
A convenient digital battery indicator is located right on
the motor head.
DIGITAL MAXIMIZER
YES*
COOL, QUIET POWER
YES
* Select models.
See motor selection chart on pages 66-67.
Riptide Transom’s remarkably
simple, one-hand stow mechanism
gets the motor in and out of the
water in no time. Just pull up and
forward to stow. When it’s time to
fish, use the easy-access thumb
release to deploy Riptide into any
one of ten different positions.
RIPTIDE TRANSOM
S A L T W A T E R
RIPTIDE
TRANSOM
SALTWATER JUST THREW IN THE TOWEL.
Riptide steps up to the rigors of saltwater and never backs down. Where lesser motors fold their tents
and head home under pressure, Riptide brings it day after day. You simply cannot find a trolling motor
better suited to give saltwater the ultimate staredown. End of story.
49
MOTORS
REMOTE SPEED CONTROL.
Control the speed of your EM motor with an 18' corded remote control. It can be mounted
or handheld, and offers infinite variable speed control in forward and reverse. Features
neutral (off) detent position. The motor can be steered using the boat’s steering wheel or
outboard tiller.
50
SPECIFICATIONS
160
VOLTAGE
12, 24, 36
101
80
55
PROP
WEEDLESS WEDGE 2
SPEEDS (FWD/REV)
VARIABLE
BRACKET
COMPOSITE
FRESHWATER ENGINE MOUNT.
SALTWATER ENGINE MOUNT.
When it’s time to trade skis and wakeboards
for rods and reels – Engine Mounts make
sure you’re ready.
Our Saltwater Engine Mount motors put the
corrosion-resistant power of Riptide on your
boat without cluttering the deck.
ENGINE MOUNT
AVAILABLE THRUST LEVELS
See motor selection
chart on pages 66-67.
minnkotamotors.com
Instantly transform your boat into a bona fide fishing machine without adding a motor to your deck.
Our Engine Mount (EM) motors can easily be implemented and won’t interfere with your boat or motor.
They’re perfect for slow maneuvering or picking your way through tight spots.
ENGINE
MOUNT
AT THE READY.
A DISCRETE, INTERFERENCEFREE MOUNT.
SEALED AND PROTECTED ELECTRONICS.
EM mounts on the cavitation plate of
your outboard or I/O lower unit, with
no stowing or deploying required. The
motor stays out of sight, won’t interfere
with your I/O motor, keeps your deck
clear, and rides completely out of the
water once you’re on plane.
EM electronics are housed in a fully waterproof control module mounted below
the deck of the boat. All electronics are sealed in marine-grade polyurethane to
provide corrosion-proof protection, and the extruded aluminum housing features
specially designed fins that dissipate heat to keep things cool under high rpm use.
DIGITAL MAXIMIZER.
ENGINE MOUNT GUIDE.
By controlling the draw of power at variable speeds, Digital
Maximizer eliminates wasted energy, extends battery life and
gives you more time on the water.
• Minimum clearance
required from spine of
outboard to end of cavitation
plate (see diagram).
• Cavitation plate
to waterline
13" (minimum).
MINN KOTA ENGINE MOUNT MOTOR SELECTION CHART.
BOAT LENGTH
14'
16'
18'
20'
22'
24'
55EM – 12V
MOTOR
SELECTION
= 7-1/4"
80EM – 24V
101EM – 36V
160EM – 24V
51
= 3" (80EM/101EM)
3-3/4" (55EM)
= 13"
MOTORS
COMPOSITE TABS.
Minn Kota’s Trim Tabs are injection molded for superior durability and corrosion
resistance. Their unique contoured shape features a larger surface area and
flared edges that channel water down the length of the tab, delivering exceptional
lift performance. See page 65.
Tab 9 x 12
52
End View
53
TRIM TABS
TRIM
TABS
NOT THE FIRST, BUT THE BEST.
CHOOSING THE RIGHT TABS.
To determine what size tabs will best fit your boat, consult
this chart. The larger the tab size, the more lift they create.
As a rule of thumb, go with the largest tab size that your
transom will accommodate.
12 x 18
12 x 12
12 x 9
9 x 18
9 x 12
9x9
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
minnkotamotors.com
14
BOAT LENGTH (FT)
We’ve always given you the power to go “Anywhere. Anytime.” Now we’re making the ride smoother, faster
and more comfortable. Our corrosion-resistant, structural-grade Trim Tabs compensate for rough conditions
to get you on plane faster, control list conditions and improve fuel economy. We didn’t invent Trim Tabs,
we just perfected them.
KEEP AN EVEN KEEL.
CONTROL AT THE FLIP OF A SWITCH.
Our sealed, waterproof electronic switches put control at your
fingertips. The Basic Rocker Switch provides up/down control
of each tab, while the Indicator Switch adds one-touch auto up/
down controls and LED lights to display each tab’s position. Install
an Auxiliary Switch to control tabs from a flybridge.
Basic Rocker Switch
Indicator Switch
Every boat has both a pitch axis –
which spans the width of the boat –
and a roll axis – which runs from bow
to transom. Trim Tabs keep your
boat aligned on both axes to prevent
plowing and dipping, saving you fuel
and creating a smoother ride.
PITCH AXIS
High Bow Condition
ACTUATORS: THE DRIVING FORCE.
A custom 12V DC motor powers our intelligently designed actuators, which
control tab position with quiet, dependable smooth operation. They also feature
the industry’s highest IP68 waterproof rating.
ITEM #
1863750
1863755
DESCRIPTION
Short-Stroke Actuator
Standard-Stroke Actuator
RETRACTED LENGTH
10.25"
11.50"
EXTENDED LENGTH TOTAL STROKE
12.65"
2.40"
15.00"
3.50"
LOWER BOTH TABS
ROLL AXIS
Correcting Port Side List Condition
LOWER
PORT TAB
RAISED
STARBOARD TAB
MOTORS
CONTROL AT THE FLIP OF A SWITCH.
Our Indicator Switch controls each tab independently and features an
LED readout for instant feedback on each tab’s position. The auto up/down
feature gives you one-touch control of the ultimate fishing system.
Indicator Switch
54
55
TRIM-N-TROLL
TRIM-N-TROLL™.
Get the proven performance of a Minn Kota motor
mounted on our revolutionary Trim Tabs.
ITEM #
DESCRIPTION
THRUST
VOLTS
TAB SIZE
1863650
Complete Trim-N-Troll Kit
160 lb
24
9" x 12"
1863655
Complete Trim-N-Troll Kit
160 lb
24
12" x 12"
1863660
Complete Trim-N-Troll Kit
202 lb
36
9" x 12"
1863665
Complete Trim-N-Troll Kit
202 lb
36
12" x 12"
1863710
LED Indicator Switch
—
—
—
1863720
Auxiliary Switch
—
—
—
Indicator Switch and Trim Tabs must be purchased separately.
minnkotamotors.com
This fully integrated trim/troll system gives you the legendary performance of a Minn Kota motor with the
control and efficiency of our Trim Tabs. Discreet design. Superior corrosion protection. The remote control
freedom to fish on a clean and uncluttered deck.
TRIM-N-TROLL
INNOVATIVE INTEGRATION.
ACTUATORS: THE DRIVING FORCE.
A custom 12V DC motor powers our intelligently designed actuators, which
control tab position with quiet, dependable, smooth operation. They also feature
the industry’s highest IP68 waterproof rating.
ITEM #
1863750
1863755
DESCRIPTION
Short-Stroke Actuator
Standard-Stroke Actuator
RETRACTED LENGTH
10.25"
11.50"
EXTENDED LENGTH TOTAL STROKE
12.65"
2.40"
15.00"
3.50"
TRIM-N-TROLL REMOTE.
Trim-N-Troll™ comes standard with a wireless remote. Control speed, steering and tab height, troll
forward or backward, and use the exclusive return-to-center feature to maintain your course
setting – even in the middle of a turn. Enjoy the freedom of control from anywhere on the boat,
from the most comprehensive remote on the water.
Troll Up/Down
Return-to-Center
Forward/Reverse
Steer Left
On/Off
Decrease Speed
Increase Speed
Steer Right
TRIM-N-TROLL
COMPLETE KIT.
Trim-N-Troll ships ready to fish with
two 80- or 101-lb lower units, 2
long-stroke actuators, 2 Trim Tabs, a
motor control unit, wireless remote,
network splitter and indicator switch.
Mounting hardware included.
CHARGERS
56
NEW
MK 110D
ON-BOARD MARINE BATTERY CHARGERS
ON-BOARD MARINE
BATTERY
CHARGERS
MORE POWER TO YOU.
MK 210D
minnkotamotors.com
NEW
NEW
MK 220D
NEW
MK 330D
MK 440D
NEW MK 106D, MK 230D, MK 315D, MK 345D, MK 460D NOT SHOWN.
BATTERY CHARGER TEMPERATURE COMPENSATION
NEW ON-BOARD MARINE BATTERY CHARGERS.
absorption voltage
TWO TIMES FASTER CHARGING.
(output voltage)
BATTERY VOLTAGE
Reengineered with a microprocessor-based design, our all-new digital on-board
chargers protect your battery, charge faster, and help you stay on the water longer.
15.5
15
In high temperatures, our new on-board chargers juice up your batteries
up to twice as fast. Thanks to a digital design that monitors everything
from temperature to state of charge, our new on-boards get the job done.
14.5
14
13.5
13
12.5
DIGITALLY CONTROLLED.
PROTECTS BATTERIES.
Our new on-board chargers feature Multi-Stage Charging and Automatic
Temperature Compensation for more precise charges that won’t damage your
battery. And its automatic shut-off feature extends battery life by shutting down
when charging is complete. So your battery – and your day on the water – will always
last longer.
20
40
60
80
100
BATTERY TEMPERATURE (degree F)
Automatic Temperature Compensation.
Adjusts output voltage based on ambient temperature
to ensure a full charge and protect your batteries.
ENHANCED STATUS CODES.
Comprehensive readings on our new chargers inform you of the charge
stage, maintenance mode status, any error notifications and full charge.
• Waterproof, shock- and vibration-resistant aluminum
construction
• Saltwater tested and fully corrosion-resistant
• Short circuit, reverse polarity, arc and ignition protected
• For use with 12V/6 cell batteries that are flooded/wet cell,
maintenance free or starved electrolyte (AGM) only
• FCC compliant
• UL listed to marine standard 1236
M U LT I-S TAG E C H A R G I N G
BULK
A M P S & V O LT S
We set out to build a smarter charger, and the result is the
ingenious microprocessor-based design of our new on-board
units. By monitoring factors like temperature and state of
charge, they deliver a faster, more regulated precise charge –
so you can stay on the water longer, without worrying about
your batteries.
ABSORPTION
MAINTENANCE
V O LTS
AM PS
MK 106D
1 BANK
6 AMPS OUTPUT
6 AMPS TOTAL OUTPUT
MK 110D
1 BANK
10 AMPS OUTPUT
10 AMPS TOTAL OUTPUT
MK 210D
2 BANKS
5 AMPS OUTPUT PER BANK
10 AMPS TOTAL OUTPUT
MK
2
10
20
220D
BANKS
AMPS OUTPUT PER BANK
AMPS TOTAL OUTPUT
MK
2
15
30
230D
BANKS
AMPS OUTPUT PER BANK
AMPS TOTAL OUTPUT
MK 315D
3 BANKS
5 AMPS OUTPUT PER BANK
15 AMPS TOTAL OUTPUT
MK
3
10
30
MK
3
15
45
MK
4
10
40
440D
BANKS
AMPS OUTPUT PER BANK
AMPS TOTAL OUTPUT
MK
4
15
60
460D
BANKS
AMPS OUTPUT PER BANK
AMPS TOTAL OUTPUT
T I M E (T H R E E S TAG E C H A R G E R )
Multi-Stage Charging.
Delivers the precise charge profile by automatically
controlling current and voltage without overcharging
your batteries.
330D
BANKS
AMPS OUTPUT PER BANK
AMPS TOTAL OUTPUT
57
345D
BANKS
AMPS OUTPUT PER BANK
AMPS TOTAL OUTPUT
CHARGERS & ANCHOR WINCHES
M U LT I-S TAG E C H A R G I N G
BULK
MULTI-STAGE CHARGING.
MAINTENANCE
A M P S & V O LT S
Minn Kota portable chargers feature multi-stage charging. In addition to providing up to 50% faster
charge times, it also prevents overcharging and undercharging of your batteries by charging them in
three distinct phases: bulk, absorption and maintenance. So you get a faster, more precise charge that
protects the investment you’ve made in your batteries.*
ABSORPTION
*Available on portable and on-board marine chargers.
V O LTS
AM PS
58
T I M E (T H R E E S TAG E C H A R G E R )
ON-BOARD DC ALTERNATOR CHARGER.
Choose the combination of banks, amps and total power
output that suits you best – then take it with you.
Use your main engine to charge up your batteries on
runs between fishing spots.
POWER MANAGEMENT & DECKHAND
PORTABLE CHARGER.
Serious anglers know that boat placement and control play as much a part
in catching fish as any other factor. A Minn Kota trolling motor can take
you to the fish, our DeckHand anchor winches can keep you there.
DECKHAND 40.
Why do all the work when a DeckHand will do it for you? These electric winches
will automatically raise or lower your anchor at the touch of a button. A special
anti-drag system senses the bottom to allow for controlled drifting.
• Davit can be mounted at base of DeckHand or in remote position on boat deck
• 40-lb anchor capacity (anchor not included)
• Pre-spooled with 100 feet of 800-lb test nylon rope
• Universal davit stows anchor horizontally to eliminate anchor swing
MK 210P
MK 2 DC
PORTABLE
&
DC
ALTERNATOR
READY WHEN YOU ARE.
• Runs on 12-volt battery (not included)
ON-BOARD DC ALTERNATOR CHARGERS.
DECKHAND 25R.
Get power to go, with portable chargers that feature multi-stage charging
to keep you on the water longer. Their innovative design prevents
overcharging and undercharging to extend the life of your batteries.
Our DC Alternator Chargers utilize power from the main engine to help
charge your trolling motor batteries. Each model features a waterproof,
low-profile, corrosion-resistant design, and a master cutoff switch.
The DeckHand 25R has a 12-foot corded remote control to
let you operate your DeckHand from anywhere on the boat.
• Fully automatic 3-stage charging (bulk, absorption and maintenance)
• LED display indicates power ON, charging, full charge and check connection
• Short circuit and reverse polarity protection prevents chargers from
operating if improperly connected to the battery
• For use with 12V/6 cell batteries (50-130 amp hour rating) that are
flooded/wet cell, maintenance free or starved electrolyte (AGM) only
• Charge-on-the-fly circuitry puts additional juice back in your trolling
batteries on runs between fishing spots – turns off when engine stops
• For use with 12 volt systems with 12V/6 cell batteries that are
flooded/wet cell, maintenance free or starved electrolyte (AGM) only
• Includes one 6-foot fused input cable and one 6-foot fused
output cable
• UL listed to marine standard 1236
• FCC compliant
MK 105P *
1 BANK
5 AMPS OUTPUT
5 AMPS
TOTAL OUTPUT
MK 110P
1 BANK
10 AMPS OUTPUT
10 AMPS
TOTAL OUTPUT
MK 210P
2 BANKS
5 AMPS OUTPUT
PER BANK
10 AMPS
TOTAL OUTPUT
*Except the MK 105P, which charges in two stages (bulk and maintenance).
• 25-lb anchor capacity (anchor not included)
• Includes davit for stowing most styles of anchors
• Pre-spooled with 60 feet of 800-lb test nylon rope
• Runs on 12-volt battery (not included)
• LED indicators display power-on, charging and check connection
• FCC compliant
MK
1
10
10
1 DC
BANK
AMPS OUTPUT
AMPS
TOTAL OUTPUT
DECKHAND
DE
E CK
CKHA
HAND
ND 2
25.
5.
MK 2 DC
2 BANKS
10 AMPS OUTPUT
PER BANK
20 AMPS
TOTAL OUTPUT
See page 64 for specifications.
MK 3 DC
3 BANKS
10 AMPS OUTPUT
PER BANK
30 AMPS
TOTAL OUTPUT
25' cord allows you to operate the DeckHand 40
from anywhere on the boat (optional accessory).
DECKHAND
STAY IN THE STRIKE ZONE.
PORTABLE CHARGERS.
*
DECKHAND 40 REMOTE SWITCH.
•2
25-lb
5 lb aanchor
5ncho
nc
hor capacity
capa
p city (anchor
(an
a ch
c or not
ot included)
include
d d)
• IIncludes
nclu
nc
lude
dess davit for stowin
ingg most styles of anchors
stowing
•P
Pre
re--spo
p oled w
ith 60
6 fee
eett of 800-lb test nylon rope
Pre-spooled
with
feet
• Runs on 12-voltt battery
bbatteery (not included)
DECKHAND PONTOON.
Our DeckHand Pontoon includes a
MKA-16-02 quick release bracket
and MKR-12 quick connect plug.
Allows for fast, easy removal to clear
the deck when needed. Also includes
DeckHand 40 remote switch for
convenient operation from anywhere
on the boat.
minnkotamotors.com
• Anchor shackle allows for quick changes between anchors
59
ACCESSORIES
i-PILOT
POWERDRIVE FOOT PEDAL
The accessory for total boat control. i-Pilot uses GPS technology to store and retrieve locations
and paths on the water, control speed and steering of your trolling motor, set cruise control
for better bait presentation, and stay directly on a heading. Controlled by a compact, intuitive,
fully protected remote. Neck lanyard and belt carabiner included for easy access.
See all of i-Pilot’s functions on pages 10-11.
Replacement MicroTouch™ foot pedal for PowerDrive and Riptide electric steer bow-mount motors.
60
RIPTIDE ST/TERROVA FOOT PEDAL
Available on Terrova, PowerDrive V2, Riptide ST and
Riptide SP bow-mount trolling motors.
Low-profile design offers two steering options: heel/toe pedal or left/right steering buttons. Includes
rotary speed control dial, momentary/constant on toggle, AutoPilot on/off toggle and 18' cable with
IP68-rated waterproof connector plug. Plug-n-play with Riptide ST or Terrova motors and works in
conjunction with CoPilot.
i-Pilot installs simply: just replace the top of the motor
head, activate your remote and you’re ready to fish.
RIPTIDE SP/POWERDRIVE V2 FOOT PEDAL
AUTOPILOT ACCESSORY
Side-to-side steering pedal includes momentary/constant on switch, speed control knob for precise
adjustments and 18' cable with IP68-rated waterproof connector plug. Plug-n-play with Riptide SP
or PowerDrive V2 motors and works in conjunction with CoPilot. Available corded or wireless.
INSTALLATION IS AS EASY AS 1-2-3…4.
Upgrade your Terrova with the easy-toinstall AutoPilot accessory. AutoPilot
intelligently, automatically steers your
trolling motor toward any heading you
choose. It uses a patented, state-ofthe-art compass – correcting for wind,
waves and current – to keep your boat
on course.
CORDED
MKA-23
RTA-19
AUTOPILOT LETS YOU:
• Troll along a current line or over
a shelf or ledge
• Hover in place over school fish
• Troll parallel to the shoreline
• Repeat a productive troll
WIRELESS
Available as an add-on, plug-in
module for Terrova bow-mount
trolling motors.
1
2
3
4
Remove control
head cover.
Position the tray
over the exposed
control head and
lock into place.
Connect the
AutoPilot and network
cable, remove tray.
Reattach control
head cover and you’re
on your way.
COMPOSITE QUICK RELEASE BRACKETS
(MKA-21, MKA-23, RTA-17, RTA-19)
Easily remove any Terrova, PowerDrive V2, PowerDrive or Pontoon Hand Control (MKA-21); Fortrex,
Maxxum, Maxxum Pro, All Terrain or Edge (MKA-23); Riptide ST or Riptide SP (RTA-17); or
Riptide SF, Riptide SM or Riptide SE (RTA-19) bow-mount motor. High-yield composite construction
is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is
removed. Locking handle with stainless steel pins can be secured with padlock (not included).
Trolling motor attaches
to top of bracket. Bracket
locks in over top of deckmounted center puck.
MKA-21
RTA-17
UNIVERSAL SONAR 2 ADAPTERS
ADAPTER PLATE FOR COMPOSITE QUICK RELEASE BRACKETS
Center puck not
included with
adapter plates.
MKA-22
*200kHz and 200/83kHz DualBeam PLUS compatible.
Cover included with
quick release bracket.
60˚
83kHz
20˚
200kHz
Shielded for Added
Peace of Mind.
These shielded cable connectors
virtually eliminate the possibility
of sonar interference and they’re
waterproof for extra dependability.
Control speed, steering and on/off from
anywhere on the boat with the CoPilot
wireless remote. The handheld, waterproof
remote is conveniently attached to a neck
lanyard for easy access and also floats.
ELECTRIC STEER QUICK RELEASE BRACKET WITH COVER
(MKA-32)
Quickly remove any Terrova, PowerDrive V2 or PowerDrive bow-mount trolling motor. Cam-lock
design and ultra-tight tolerances eliminate bracket movement and noise. Locking lever includes pin and
lanyard. Upper and lower plates can be secured with padlock (not included). Composite cover attaches
to lower half of bracket when motor is removed, keeping the deck profile clean.
MKR-US2-1
MKR-US2-8
MKR-US2-9
MKR-US2-10
MKR-US2-11
Garmin
Humminbird 7-pin
Lowrance 6-pin/Eagle Blue
Lowrance
Universal Sonar 2 Extension Cable
MKA-32
MKA-42
WIRELESS COPILOT
(MKA-22)
Allows hole patterns from previously mounted motors to be used with composite brackets (MKA-21
and RTA-17). Ideal for carpeted deck surfaces.
High Speed Bypass (Terrova/Riptide ST only)
MKA-16-02
ALUMINUM QUICK RELEASE BRACKETS
(MKA-16-02, MKA-42, MKA-52/62)
For easy, quick removal of any Terrova, PowerDrive V2, PowerDrive (MKA-16-02); Fortrex or
Maxxum (MKA-42, MKA-52/62) bow-mount trolling motor. Extruded aluminum design with side
screw provides quiet and secure locking system. MKA-42 fits 42" shaft foot control motors, 42" and
52" shaft hand control motors. MKA-52/62 fits 52" and 62" shaft foot control motors and 62" shaft
hand control motors.
AutoPilot On/Off (Terrova/Riptide ST only)
Steer Left
TROLLING MOTOR POWER CENTER
Propeller On/Off
For small boat, transom applications, these easy access external battery terminals allow trolling
motor leads and charger leads to be connected without opening the box. Built-in battery meter
includes two 12-volt accessory plugs, and 2 manual reset circuit breakers (15 amp for accessory
plugs and 60 amp for trolling motor). Fits group 24- and 27-size batteries.
Decrease Speed
Increase Speed
Steer Right
TWO ADDITIONAL BUTTONS,
ENDLESS OPTIONS.
Each CoPilot system includes: receiver, key-fob remote and neck lanyard.
On Terrova and Riptide ST, CoPilot adds two
extra features: reach maximum speed in
an instant with the high speed bypass button,
and get one-touch AutoPilot activation.
Available on the following motors:
• Wireless CoPilot for Terrova
• Wireless CoPilot for PowerDrive, Riptide with AutoPilot and PowerDrive V2
Actual Size
WIRELESS ACCESSORIES (NOT SHOWN):
Wireless Foot Pedal (PowerDrive or PowerDrive V2 CoPilots), Replacement CoPilot Remotes
DIGITAL BATTERY METER
(MK-BM-1D)
Monitor the voltage level and “state of charge” of any 12-volt battery with an LCD display
mounted on a compact frame that’s easy to store anywhere. Includes LEDs that indicate
full, 2/3, 1/3 or 0 “state of charge.”
minnkotamotors.com
Universal Sonar 2 delivers advanced water temperature
sensing and DualBeam PLUS technology for the best
view of the waters below. These adapters connect your
motor to your favorite brand of sonar or fishfinder* with
IP68-rated waterproof connectors.
61
ACCESSORIES
AC POWER PORT
MKA-43
-43 25"
(MKR-21, MKR-23)
Our convenient adapter allows quick thru-hull connection to an AC extension cord using the male
AC plug from any of our chargers. No cutting or splicing required. The watertight cover and gasket
prevent corrosion on the AC plug when it isn’t in use.
MKR-23 AC POWER PORT
SALTWATER
MKA-44 40"
TELESCOPIC EXTENSION HANDLES
(MKA-43, MKA-44)
Simply twist the handle to loosen, adjust and tighten our extension handles. Go from 17" to 25"
(MKA-43) or 24" to 40" (MKA-44) and experience total speed and steering control in any
situation. Fits all outboard and trolling motors.
MKR-21 AC POWER PORT
FRESHWATER
62
TROLLING MOTOR QUICK CONNECT
(MKR-12)
MKA-18
For wiring where a plug and socket cannot be used. Heavy-duty 10-gauge connectors.
MKA-7
CIRCUIT BREAKER
EXTENSION HANDLES
(MKA-7, MKA-18)
Provides easier steering and speed control for all hand control motors. Available in 18" (MKA-18)
or extra-long 30" (MKA-7) models.
WEEDLESS WEDGE 2 PROP
(MKR-19)
Protects trolling motor from electrical damage. 60 amp rating with manual reset. Fully waterproof.
Compatible with all 12-, 24- and 36-volt systems.
CHARGER OUTPUT EXTENSION CABLES
(MK-EC-15)
Extension cables are ideal when standard charger cables will not reach bow, center or transom battery
compartments. Features WAGO® Wall-Nut™ quick connectors (UL listed). Fused (30 amp) positive and
negative leads. Available in 15' length.
WEEDLESS WEDGE PROP
(MKR-20)
(MKP-6, MKP-7, MKP-8, MKP-24)
100% weedless. Unique, patented design pushes weeds away to conserve battery power. Easily moves
through heavy vegetation, even at slow speeds. See page 65.
POWER PROP
TROLLING MOTOR QUICK CONNECT PLUG
(MKP-32, MKP-33)
Swept-back and flared blades push weeds away even better than the original Weedless Wedge™.
Delivers improved efficiency through the heaviest vegetation, at any speed. See page 65.
(MKP-2)
Delivers extra power to push through heavy vegetation. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25)
diameters. See page 65.
Heavy-duty connector has positive snap-lock design for 6- to 12-gauge wire. Kit includes two plug
halves, four contacts and four solder plugs for securing wire leads into the contacts (wire not included).
PROP NUT KIT
(MKP-9, MKP-10, MKP-11, MKP-23, MKP-34)
Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to
fit Minn Kota prop dimensions (3/8", 1/2" and 5/16"). Requires crescent wrench for installation.
MKR-18A
(MKR-18/MKR-18A)
Universal design for 2- or 3-wire configurations on 12- to 36-volt systems. Watertight sealing cap and
corrosion-resistant electrical components. Requires standard 1-1/8" diameter mounting hole. MKR-18A
allows for 6-gauge wire connection.
TRANSDUCER MOUNTING KIT
(MKR-15)
Allows mounting on lower unit of bow- or transom-mount motors. Rugged, durable construction.
Fits transducers of all major manufacturers.
MKR-18
BATTERY CONNECTORS
(MK-BC-1)
Patented design is ideal for installing batteries in tight, confined places. Easy to disconnect for quick,
convenient charging. Plastic cover eliminates risk of electrical shock.
QUICK NUTS
(MKR-8)
Allows for mounting motor/accessories where there is limited space or no access from below
(as required by standard nuts and bolts).
BOW-MOUNT STABILIZER KIT
(MKA-4)
Reduces bounce on Maxxum Pro, Maxxum, Riptide Pro and Riptide SM bow-mount motors.
Attaches to the top side of the upper arm of the scissors mount. When motor is stowed, the
stabilizer is positioned vertically between the upper arm of the bracket and the deck of the boat.
Rubber bumper protects deck finish.
BOW-MOUNT STABILIZER KIT
(MKA-34)
Every tool you need to maintain your Minn Kota motor is contained within this stainless steel multi-tool.
Pliers, sockets, screw drivers, hooked awl, file, knife, wire cutter/crimper and scissors help you do
everything from wiring to prop maintenance.
(MKA-29)
Fit any Maxxum Pro, Maxxum, Riptide Pro or Riptide SM bow-mount trolling motor. Fits between
upper and lower arm of mounting bracket. Pivots into vertical position when motor is stowed
to reduce bounce from heavy chop or wake. Rotates into horizontal position along side upper
arm when motor is deployed. Saltwater tested and fully resistant to corrosion.
ROPE AND HANDLE
TROLLING MOTOR MULTI-TOOL
DRIFT SOCK
(MKA-26, MKA-27)
Slows down your drift to enable proper bait presentation over
holding fish. Both models are 34" deep and 22" in diameter,
with four heavy-duty, 1" nylon straps. The MKA-27 uses built-in
weights and floats to open automatically in the water, and
features stronger, 420 denier ripstop nylon.
Drift Sock works against wind and current to
improve bait presentation over holding fish.
(MKA-45)
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic
soft-grip design and durable, abrasion resistant 48" nylon rope.
DRIFT SOCK HARNESS
(MKA-28)
7' harness allows sock to be quickly released without tangles while fighting fish. Attaches to any cleat
with a 12" sewn loop and a quick connect clip.
minnkotamotors.com
TROLLING MOTOR PLUG AND RECEPTACLE
63
CHARTS
REPLACEMENT PROP SELECTION CHART
PICK THE RIGHT CHARGER, AS EASY AS 1-2-3.
WEEDLESS WEDGE 2 PROPS
12 volt
STEP 1
Determine how many
charging banks your
trolling system requires.
You need one charging
bank for each battery
(include your starting
battery, if appropriate).
STEP 2
Determine the speed
of recovery/recharging
time you require.
12 volt
12 volt
12 volt
12 volt
12 volt
12 volt
12 volt
12 volt
12 volt
1 battery = 1 charging bank
2 batteries = 2 charging banks
3 batteries = 3 charging banks
4 batteries = 4 charging banks
3 - 5 HOURS RECOVERY TIME
=
15 AMPS PER BANK
4 - 6 HOURS RECOVERY TIME
=
10 AMPS PER BANK
10 - 12 HOURS RECOVERY TIME
=
5 OR 6 AMPS PER BANK
WEEDLESS WEDGE 2
The next generation of the
industry’s only 100% fully
weedless prop. Swept-back,
flared blades “wedge” weeds
away, allowing you to pass
through heavy vegetation at
any speed, without draining
valuable battery power.
MOTOR MODELS WITH SERIAL NUMBER PREFIX “WW,” “J” OR “K”
MKP-33
#2331160 TERROVA 80, TERROVA 80/US2, TERROVA 80/AP, TERROVA 80/AP/US2, TERROVA 101, TERROVA 101/US2, TERROVA 101/AP, TERROVA 101/AP/US2,
PROP NO.:
MOTOR DIA.:
4"
MAX 80, MAX 80/BG/US2, MAX 80/US, MAX 101, MAX 101/US, MAX 101/H, MAX PRO 80, MAX PRO 80/BG/US2, MAX PRO 80/US, MAX PRO 101,
PROP NUT KIT: “E”
MAX PRO 101/BG/US2, MAX PRO 101/US, MAX 80T, MAX 80/H, 80PD, 80PD/AP, 80PD/US, 80PD/AP/US, VECTOR 80/3X, VECTOR 101/3X, VANTAGE 80,
VANTAGE 101, RT80/ST/CP, RT80/ST/CP/AP, RT101/ST/CP/AP, RT PRO 80, RT PRO 101, RT80/SM/L&D, RT80/SM/BG, RT101/SM/BG, RT80/B,
RT80/B/L&D, RT80/S, RT101/B, RT101/S, RT80/AP, MK80EM, MK101EM, MK160EM, MK202EM, RT80EM, RT101EM, RT160EM, RT202EM, RT101/SF,
RT80/SF, FORTREX 101/US2, FORTREX 101, FORTREX 80/US2, FORTREX 80, TRAXXIS 80, ALL TRIM-N-TROLL KITS
WEEDLESS WEDGE PROPS
Select the Minn Kota charger that best meets your needs from chart below.
LENGTH
WIDTH
HEIGHT
WEIGHT
(LBS)
# OF
BANKS
OUTPUT PER BANK
(AMPS)
TOTAL OUTPUT
(AMPS)
RECOVERY TIME*
(HOURS)
1821065
MK 106D On-Board Charger
8-3/4"
4-3/4"
3"
4.5
1
6
6
10-12
1821105
MK 110D On-Board Charger
10-1/2"
7-1/2"
4"
10
1
10
10
4-6
1822105
MK 210D On-Board Charger
11-1/2"
7-1/2"
4"
11
2
5
10
10-12
10-12
1823155
MK 315D On-Board Charger
12-1/2"
7-1/2"
4"
14
3
5
15
1822205
MK 220D On-Board Charger
13-1/2"
7-1/2"
4"
15
2
10
20
4-6
1823305
MK 330D On-Board Charger
16-1/4"
7-1/2"
4"
20
3
10
30
4-6
1824405
MK 440D On-Board Charger
11-3/4"
6-3/4"
8"
22.5
4
10
40
4-6
1822305
MK 230D On-Board Charger
11-3/4"
6-3/4"
7"
16.6
2
15
30
3-5
1823455
MK 345D On-Board Charger
11-3/4"
6-3/4"
8"
22
3
15
45
3-5
1824605
MK 460D On-Board Charger
14-1/2"
6-3/4"
8"
31
4
15
60
3-5
EXCLUSIVE WEEDLESS
WEDGE PROPS
The patented Weedless Wedge
is the only 100% weedless
prop in the history of fishing.
The leading edge on each
propeller blade is shaped with
a swept-back edge that always
meets at an angle of less than
45 degrees. “Wedges” weeds
away from the hub – even at
slow fishing speeds.
MKP-8
#2331120 MOTOR MODELS WITH SERIAL NUMBER PREFIX “MK,” “J” OR “K”
PROP NO.:
74PD, 74PD/AP, 74PD/AP/US, MAX 74, MAX 74/US, MAX 74/H, 64PD, VANTAGE 74
4"
MOTOR DIA.:
PROP NUT KIT: “B”
MKP-24
#2331130 MOTOR MODELS WITH SERIAL NUMBER PREFIX “MK,” “J” OR “K”
PROP NO.:
MAX 101, MAX 101/H, VANTAGE 101, RT101/S, RT101/S/3X, RT101/B, RT101/B/H, RT101/B/BG/3X, VECTOR 101/3X
4"
MOTOR DIA.:
PROP NUT KIT: “D”
POWER PROPS
MKP-37
#2091170
PROP NO.:
ENDURA C2 55, ENDURA C2 50, CAMO 55, TRAXXIS 70, TRAXXIS 55/SC, TRAXXIS 55, RT55/T, RT50/SC/T
3-5/8"
MOTOR DIA.:
PROP NUT KIT: “A”
For a complete compatibility chart, go to minnkotamotors.com.
TRIM TAB PRODUCT SPECIFICATIONS
ON-BOARD ALTERNATOR CHARGER PRODUCT SPECIFICATIONS
LENGTH
WIDTH
HEIGHT
WEIGHT
(LBS)
# OF
BANKS
OUTPUT PER BANK** TOTAL OUTPUT**
(AMPS)
(AMPS)
RECOVERY TIME*
(HOURS)
1821031
MK 1 DC On-Board Alternator Charger
7"
7-1/4"
3-1/2"
5
1
10
10
***
1821032
MK 2 DC On-Board Alternator Charger
10-1/2"
7-1/4"
3-1/2"
6.5
2
10
20
***
1821033
MK 3 DC On-Board Alternator Charger
14-1/2"
7-1/4"
3-1/2"
8.5
3
10
30
***
OUTPUT PER BANK
(AMPS)
TOTAL OUTPUT
(AMPS)
RECOVERY TIME*
(HOURS)
*Approximate time to restore deep cycle batteries at 60% discharge. **Dependent on alternator output. ***Dependent on alternator output and amount of time engine runs.
PORTABLE CHARGER PRODUCT SPECIFICATIONS
ITEM #
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT
(LBS)
# OF
BANKS
1821051
MK 105P Portable Charger
5"
7"
6-1/2"
3.4
1
5
5
10-12
1820110
MK 110P Portable Charger
7"
9"
7-3/4"
6.5
1
10
10
4-6
1822110
MK 210P Portable Charger
7"
9"
7-3/4"
6.7
2
5
10
10-12
ITEM #
DESCRIPTION
1863500
1863510
1863515
1863520
1863530
1863540
1863545
1863550
1863750
1863755
1863700
1863710
1863720
9" x 9" Tabs (no actuators/no switch)
9" x 12" Tabs (no actuators/no switch)
9" x 12" Trim Tab Kit (tabs, standard stroke actuators, Basic Rocker Switch)
9" x 18" Tabs (no actuators/no switch)
12" x 9" Tabs (no actuators/no switch)
12" x 12" Tabs (no actuators/no switch)
12" x 12" Trim Tab Kit (tabs, standard stroke actuators, Basic Rocker Switch)
12" x 18" Tabs (no actuators/no switch)
Short Stroke Actuators (11" min. transom height)
Standard Stroke Actuators (15" min. transom height)
Basic Rocker Switch (includes Control Module)
Position Indicator Switch (includes Control Module)
Auxiliary Switch
minnkotamotors.com
DESCRIPTION
APPLICABLE MOTOR MODELS
MKP-2
PROP NO.:
#2061121 CLASSIC 28, EDGE 45, EDGE 45/H, ENDURA 30, ENDURA 36, ENDURA 38, ENDURA 40, ENDURA 45, RT40/SC, ENDURA PRO 32, ENDURA PRO 38,
MOTOR DIA.:
3-1/4"
45PD V2, RT45/SC/T, TRAXXIS 45/SC, TRAXXIS 45
PROP NUT KIT: “A”
*Approximate time to restore deep cycle batteries at 60% discharge.
ITEM #
APPLICABLE MOTOR MODELS
MOTOR MODELS WITH SERIAL NUMBER PREFIX “MK,” “J” OR “K”
MKP-7
#2091150 MAX 55, MAX 55/H, MAX 55/SC, MAX 50T, MAX 55T, 65PD, 50PD, 55PD, 55PD/AP, 55PD/US, 55AP, 55AP/US, 65AP, 65PD/AP, 65PD/US, 65AP/US,
PROP NO.:
3-5/8"
MOTOR DIA.:
54PD PONTOON, 64PD PONTOON, RT55/B/SC/L&D, RT55/SC/H, RT55/AP, RT50/S, RT50/S/SC, RT55/S*, ENDURA 42, ENDURA 44, ENDURA 46,
PROP NUT KIT: “A”
*Refer to original prop on motor
ENDURA 50, ENDURA 55, ENDURA PRO 46, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 65, VECTOR 65/3X
ON-BOARD DIGITAL CHARGER PRODUCT SPECIFICATIONS
DESCRIPTION
The right tab size for your boat will be determined by a number of factors, including boat length and weight. The larger the tab size, the more
lift they create. As a rule of thumb, go with the largest tab size that your transom will accommodate. See chart below for general guidelines.
BOAT LENGTH (FT)
12 x 18
*Approximate time to restore deep cycle batteries at 60% discharge.
12 x 12
HOW WILL YOU MOUNT YOUR TALON?
12 x 9
9 x 18
Adapter bracket between
outboard and transom.
Adapter bracket between
jackplate and transom.
diagram
C
Adapter bracket to
jackplate side mount.
*
9 x 12
9x9
DESCRIPTION
SETBACK
PORT/
STARBOARD
DIAGRAM
1810200
Talon Adapter Bracket, 3S
3"
Starboard
A, B
1810201
Talon Adapter Bracket, 3P
3"
Port
A, B
1810202
Talon Adapter Bracket, 6S
6"
Starboard
A, B
1810203
Talon Adapter Bracket, 6P
6"
Port
A, B
1810204
Talon Adapter Bracket, 9S
9"
Starboard
A, B
A, B
ITEM #
STARBOARD
STARBOARD
diagram
B
ADAPTER PLATE SELECTION CHART
PORT
PORT
diagram
A
PORT
STARBOARD
If you’re not mounting Talon directly to the transom, you’ll need one of our adapter plates to
offset the unit from the back of the boat. For more information on adapter plate applications
and purchasing, visit minnkotamotors.com.
64
MKP-6
#2061125 40PD V2, 40PD, 40AP, EDGE 40, EDGE 40/H, ENDURA 30, ENDURA 34, ENDURA 36, ENDURA 38, ENDURA 40, ENDURA PRO 32, ENDURA PRO 38,
PROP NO.:
MOTOR DIA.:
3-1/4"
40AT, 40AT/H, MAX 30T, MAX 36T, MAX 40T, VECTOR 40, TRAXXIS 40, TRAXXIS 40/SC
PROP NUT KIT: “A”
STEP 3
ITEM #
APPLICABLE MOTOR MODELS
MOTOR MODELS WITH SERIAL NUMBER PREFIX “WW,” “J” OR “K”
MKP-32
#2091160 55AT, 55AT/H, 70AT, TERROVA 55, TERROVA 55/US2, TERROVA 55/AP, TERROVA 55/AP/US2, MAX 55/SC, MAX 55, MAX 55/SC/H, MAX 70, MAX 70/H/3X,
PROP NO.:
MOTOR DIA.:
3-5/8"
MAX 70/SC, MAX 70/SC/H, MAX 70/US, MAX 55T, MAX 70T, 50PD V2, 55PD V2, 55PD V2/US2, 55PD V2/AP, 55PD V2/AP/US2, 65PD V2, 70PD V2,
PROP NUT KIT “A”
70PD V2/AP, 70PD V2/AP/US2, 54PD V2 PONTOON, 68PD V2 PONTOON, 55HC PONTOON, 70HC PONTOON, 50PD, 55PD/AP, 55PD/AP/US, 55PD/US,
65PD, 70PD, 70PD/AP, 70PD/US, 70PD/AP/US, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 70, VECTOR 70/3X, EDGE 45, EDGE 55, EDGE 55/H,
EDGE 70, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, ENDURA PRO 55, CAMO 55XL, RT55/ST/CP, RT55/ST/CP/AP, RT55/SP/CP,
RT55/SP/CP/AP, RT70/SP/CP, RT70/SP/CP/AP, RT55/SM/L&D, RT55/SM/L&D/SC, RT70/SM/L&D/SC, RT55/SE/L&D, RT70/SE/L&D, RT55/B/H,
RT55/B/SC/L&D, RT65/B/SC, RT70/B/H, RT70/SC, RT50/S, RT55/S, MK55EM, RT55EM, TRAXXIS 70, TRAXXIS 55, TRAXXIS 55/SC
Minn Kota offers a wide range
of replacement props to fit all
existing and many discontinued
models. The props include the
nut attachment and can be
installed in seconds.
1810205
Talon Adapter Bracket, 9P
9"
Port
1810206
Talon Adapter Bracket, J9S*
-
Starboard
C
1810207
Talon Adapter Bracket, J9P*
-
Port
C
1810210
Talon Spacer Block Kit**
-
Both
C
1810220
Talon Riser Bracket
6"
Both
N/A
Not compatible with all jack plates. For more information on jack plate compatibility, visit minnkotamotors.com.
Required in addition to J9S and J9P brackets for T-H Marine™ Atlas 4" or 8" jack plate installations.
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
SHAFT LENGTH SELECTION GUIDE
Measure down from the mounting surface of the transom or bow to the water level*. Use this measurement and the tables below to find the appropriate shaft length.
TRANSOM GUIDE
BOW GUIDE
ENGINE MOUNT GUIDE
• Minimum clearance required
from spine of outboard
to end of cavitation plate
(see diagram at right).
TRANSOM TO WATERLINE
RECOMMENDED SHAFT LENGTH
BOW TO WATERLINE
RECOMMENDED SHAFT LENGTH
0" to 10"
10" to 16"
16" to 22"
Over 22"
30"
36"
42"
Consult Factory
0" to 10"
16" to 22"
22" to 28"
28" to 34"
36"
42" to 45"
48" to 52"
54" to 62"
**
* Add 5" to waterline measurement for fishing in rough water. Optimal operating mode is with engine trimmed all the way down.
• Cavitation plate to
waterline 13" (minimum).
= 7-1/4"
= 3" (80EM/101EM), 3-3/4" (55EM)
= 13"
65
CHARTS
MOTOR SELECTION CHART
MODEL
MOUNT
CONTROL
MAX THRUST
MAX AMP DRAW
VOLTS
SPEEDS (FWD/REV)
SHAFT LENGTH
PROP
COMPOSITE SHAFT
UNIVERSAL SONAR 2
i-PILOT
AUTOPILOT
DIGITAL MAXIMIZER
BATTERY GAUGE
MAX BOAT LENGTH★
TERROVA
BOW-MOUNT MOTORS
Terrova 101/AP/US2
Terrova 80/AP/US2
Terrova 80/AP
Terrova 80/US2
Terrova 80
Terrova 55/AP/US2
Terrova 55/AP
Terrova 55/US2
Terrova 55
Terrova
Terrova
Terrova
Terrova
Terrova
Terrova
Terrova
Terrova
Terrova
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
101
80
80
80
80
55
55
55
55
46
56
56
56
56
50
50
50
50
36
24
24
24
24
12
12
12
12
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
60"
54", 60"
54", 60"
54", 60"
54", 60"
48", 54"
48", 54"
48"
54"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Yes
—
Yes
—
Yes
—
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Yes
Yes
Yes
Compatible
Compatible
Yes
Yes
Compatible
Compatible
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25'
25'
25'
25'
25'
21'
21'
21'
21'
TERROVA WITH i-PILOT
BOW-MOUNT MOTORS
Terrova 101/IP/US2 (includes foot pedal)
Terrova 80/IP/US2 (includes foot pedal)
Terrova 55/IP/US2 (includes foot pedal) ★
Terrova
Terrova
Terrova
Electric Steer
Electric Steer
Electric Steer
101
80
55
46
56
50
36
24
12
Variable
Variable
Variable
60"
45", 60"
54"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes*
Yes*
Yes*
Yes
Yes
Yes
Yes
Yes
Yes
25'
25'
21'
POWERDRIVE V2
BOW-MOUNT MOTORS
70PD V2/AP/US2
70PD V2/AP
70PD V2/US2
70PD V2
65PD V2
55PD V2/AP/US2
55PD V2/AP
55PD V2/US2
55PD V2
50PD V2
45PD V2
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
PowerDrive
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
Electric Steer
70
70
70
70
65
55
55
55
55
50
45
42
42
42
42
40
50
50
50
50
42
42
24
24
24
24
24
12
12
12
12
12
12
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
54", 60"
54", 60"
54", 60"
54", 60"
54"
48", 54"
48", 54"
48", 54"
48", 54"
48"
48"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Power Prop
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Yes
—
—
Yes
—
Yes
—
—
—
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Compatible
Yes
Yes
—
—
—
Yes
Yes
—
—
—
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
23'
23'
23'
23'
23'
21'
21'
21'
21'
20'
17'
POWERDRIVE V2 WITH i-PILOT
BOW-MOUNT MOTORS
70PD V2/IP/US2 (no foot pedal)
70PD V2/IP (no foot pedal)
55PD V2/IP/US2 (no foot pedal) ★
55PD V2/IP (no foot pedal)
PowerDrive
PowerDrive
PowerDrive
PowerDrive
Electric Steer
Electric Steer
Electric Steer
Electric Steer
70
70
55
55
42
42
50
50
24
24
12
12
Variable
Variable
Variable
Variable
60"
54"
54"
48", 54"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
Yes
—
Yes
—
Yes
Yes
Yes
Yes
Yes*
Yes*
Yes*
Yes*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
23'
23'
21'
21'
FORTREX
BOW-MOUNT MOTORS
Fortrex 101/US2
Fortrex 101
Fortrex 80/US2
Fortrex 80
Lift-Assist/Bowguard 360°
Lift-Assist/Bowguard 360°
Lift-Assist/Bowguard 360°
Lift-Assist/Bowguard 360°
Cable Steer
Cable Steer
Cable Steer
Cable Steer
101
101
80
80
46
46
56
56
36
36
24
24
Variable
Variable
Variable
Variable
45", 52", 62"
45", 52", 62"
45", 52", 62"
45", 52", 62"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
Yes
—
Yes
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
Yes
—
—
—
—
25'
25'
25'
25'
MAXXUM
BOW-MOUNT MOTORS
Maxxum 101
Maxxum 80
Maxxum 70
Maxxum 70/SC
Maxxum 55
Maxxum 55/SC
Maxxum 101/H
Maxxum 80/H
Maxxum 70/SC/H
Maxxum 55/SC/H
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Bowguard 360°
Cable Steer
Cable Steer
Cable Steer
Cable Steer
Cable Steer
Cable Steer
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
101
80
70
70
55
55
101
80
70
55
46
56
42
42
50
50
46
56
42
50
36
24
24
24
12
12
36
24
24
12
Variable
Variable
Variable
5
Variable
5
Variable
Variable
5/3
5/3
42", 52"
42", 52"
42", 52"
42"
42", 52"
42", 52"
52"
52"
52"
52"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
—
Yes
—
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
25'
25'
23'
23'
21'
21'
25'
25'
23'
21'
EDGE
BOW-MOUNT MOTORS
Edge 70
Edge 55
Edge 55/H
Edge 45
Edge 45/H
Latch & Door
Latch & Door
Latch & Door
Latch & Door
Latch & Door
Cable Steer
Cable Steer
Tilt Twist Tiller
Cable Steer
Tilt Twist Tiller
70
55
55
45
45
42
50
50
42
42
24
12
12
12
12
5
5
5/3
5
5/3
45", 52"
45", 52"
52"
36", 45", 50"
45"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Power Prop
Power Prop
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
23'
21'
21'
18'
18'
VANTAGE
TRANSOM-MOUNT MOTORS
Vantage 101
Vantage 80
Metal Breakaway
Metal Breakaway
Tilt/Extend Tiller
Tilt/Extend Tiller
101
80
46
56
36
24
Variable
Variable
Variable
Variable
Weedless Wedge 2
Weedless Wedge 2
—
—
—
—
—
—
—
—
Yes
Yes
—
—
25'
25'
TRAXXIS
TRANSOM-MOUNT MOTORS
Traxxis 80
Traxxis 70
Traxxis 55/SC
Traxxis 55
Traxxis 45/SC
Traxxis 45
One-Hand Stow
One-Hand Stow
One-Hand Stow
One-Hand Stow
One-Hand Stow
One-Hand Stow
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
80
70
55
55
45
45
56
42
50
50
42
42
24
24
12
12
12
12
Variable
Variable
5/3
Variable
5/3
Variable
42"
42"
36"
36", 42"
36"
36"
Weedless Wedge 2
Power Prop
Power Prop
Power Prop
Power Prop
Power Prop
Yes
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Yes
Yes
—
Yes
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25'
25'
21'
21'
18'
18'
ENDURA C2
TRANSOM-MOUNT MOTORS
Endura C2 55 ★
Endura C2 50 ★
Endura C2 45 ★
Endura C2 40 ★
Endura C2 30 ★
Lever Lock Bracket
Lever Lock Bracket
Lever Lock Bracket
Lever Lock Bracket
Lever Lock Bracket
Telescoping Handle
Telescoping Handle
Telescoping Handle
Telescoping Handle
Telescoping Handle
55
50
45
40
30
50
42
42
42
30
12
12
12
12
12
5/3
5/3
5/3
5/3
5/3
36", 42"
36", 42"
36"
36"
30"
Power Prop
Power Prop
Power Prop
Power Prop
Power Prop
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
21'
20'
18'
17'
14'
SPECIALTY
TRANSOM-MOUNT MOTORS
Camo 55 ★
Camo 44 ★
Lever Lock Bracket
Lever Lock Bracket
Tilt Twist Tiller
Tilt Twist Tiller
55
44
50
42
12
12
5/3
5/3
36"
36"
Power Prop
Power Prop
Yes
Yes
—
—
—
—
—
—
—
—
—
—
21'
18'
PONTOON
BOW-MOUNT MOTORS
68PD V2
54PD V2
Pontoon 70/H
Pontoon 55/H
PowerDrive w/QR Bracket
PowerDrive w/QR Bracket
Pontoon Latch & Door
Pontoon Latch & Door
Electric Steer
Electric Steer
Tilt Twist Tiller
Tilt Twist Tiller
68
54
70
55
42
50
42
50
24
12
24
12
Variable
Variable
5/3
5/3
48"
48"
52"
52"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
—
—
—
—
Compatible
Compatible
—
—
—
—
—
—
Yes
Yes
—
—
Yes
Yes
—
—
23'
21'
25'
21'
E-DRIVE
ELECTRIC OUTBOARD
E-Drive
E-Drive Tiller
Bolt-on Transom
Clamp-on Transom
Outboard Cable Linkage
Tilt Tiller
2hp
2hp
40
40
48
48
Variable
Variable
20"*
20"*
Stainless Steel
Stainless Steel
—
—
—
—
—
—
—
—
Yes
Yes
Yes
Yes
25'
25'
ENGINE MOUNT MOTORS
MK101/EM
MK80/EM
MK55/EM
Single-Composite
Single-Composite
Single-Composite
Outboard/Engine Steering
Outboard/Engine Steering
Outboard/Engine Steering
101
80
55
49
58
50
36
24
12
Variable
Variable
Variable
—
—
—
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
—
—
—
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
—
—
—
22'
20'
18'
FRESHWATER MOTORS
RIPTIDE ST SALTWATER
BOW-MOUNT MOTORS
RT 101/ST/CP/AP
RT 80/ST/CP/AP
RT 80/ST/CP
RT 55/ST/CP/AP
Terrova
Terrova
Terrova
Terrova
CoPilot
CoPilot
CoPilot
CoPilot
101
80
80
55
46
56
56
50
36
24
24
12
Variable
Variable
Variable
Variable
54", 60"
54", 60"
54", 60"
48"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
—
—
—
—
Compatible
Compatible
Compatible
Compatible
Yes
Yes
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25'
25'
25'
21'
RIPTIDE ST SALTWATER WITH i-PILOT
BOW-MOUNT MOTORS
RT 101/ST/IP (no foot pedal) ★
RT 80/ST/IP (no foot pedal) ★
RT 55/ST/IP (no foot pedal) ★
Terrova
Terrova
Terrova
i-Pilot
i-Pilot
i-Pilot
101
80
55
46
56
50
36
24
12
Variable
Variable
Variable
60"
54"
54"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
—
—
—
Yes
Yes
Yes
Yes*
Yes*
Yes*
Yes
Yes
Yes
Yes
Yes
Yes
25'
25'
21'
RIPTIDE SP SALTWATER
BOW-MOUNT MOTORS
RT 70/SP/CP/AP
RT 70/SP/CP
RT 55/SP/CP/AP
RT 55/SP/CP
PowerDrive
PowerDrive
PowerDrive
PowerDrive
CoPilot
CoPilot
CoPilot
CoPilot
70
70
55
55
42
42
50
50
24
24
12
12
Variable
Variable
Variable
Variable
54"
54"
48"
48"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
—
—
—
—
Compatible
Compatible
Compatible
Compatible
Yes
—
Yes
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
23'
23'
21'
21'
RIPTIDE SP SALTWATER WITH i-PILOT
BOW-MOUNT MOTORS
RT 70/SP/IP ★
RT 55/SP/IP ★
PowerDrive
PowerDrive
i-Pilot
i-Pilot
70
55
42
50
24
12
Variable
Variable
54"
48"
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
—
—
Yes
Yes
Yes*
Yes*
Yes
Yes
Yes
Yes
23'
21'
RIPTIDE SF SALTWATER
BOW-MOUNT MOTORS
RT 101/SF
RT 80/SF
Lift-Assist/Bowguard 360°
Lift-Assist/Bowguard 360°
Tilt/Extend Tiller
Tilt/Extend Tiller
101
80
46
56
36
24
Variable
Variable
52", 62"
52", 62"
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
—
—
—
—
—
—
Yes
Yes
—
—
25'
25'
RIPTIDE SM SALTWATER
BOW-MOUNT MOTORS
RT 101/SM/BG/H
RT 80/SM/L&D/H
RT 80/SM/BG/H
RT 70/SM/L&D/SC/H
RT 55/SM/L&D/SC/H
RT 55/SM/L&D/H
Bowguard 360°
Latch & Door
Bowguard 360°
Latch & Door
Latch & Door
Latch & Door
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
101
80
80
70
55
55
46
56
56
42
50
50
36
24
24
24
12
12
Variable
Variable
Variable
5/3
5/3
Variable
62"
52"
52", 62"
52"
42", 52"
52"
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
—
—
Yes
—
—
—
—
—
—
25'
25'
25'
23'
21'
21'
RIPTIDE SE SALTWATER
BOW-MOUNT MOTORS
RT 70/SE/H
RT 55/SE/H
Compact Latch & Door
Compact Latch & Door
Tilt/Extend Tiller
Tilt/Extend Tiller
70
55
42
50
24
12
Variable
Variable
52"
52"
Weedless Wedge 2
Weedless Wedge 2
Yes
Yes
—
—
—
—
—
—
Yes
Yes
—
—
23'
21'
RIPTIDE SALTWATER
TRANSOM-MOUNT MOTORS
RT 101/T
RT 80/T
RT 55/T
RT 50/SC/T
RT 45/SC/T
One-Hand Stow
One-Hand Stow
One-Hand Stow
One-Hand Stow
One-Hand Stow
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
Tilt/Extend Tiller
101
80
55
50
45
46
56
50
42
42
36
24
12
12
12
Variable
Variable
Variable
5/3
5/3
52"
42"
36", 42"
42"
36"
Weedless Wedge 2
Weedless Wedge 2
Power Prop
Power Prop
Power Prop
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
—
—
—
—
—
—
—
25'
25'
21'
20'
17'
160
80
55
116
58
50
24
24
12
Variable
Variable
Variable
—
—
—
—
—
—
24'
20'
18'
ENGINE MOUNT SALTWATER
MOTORS
AP = AutoPilot
CP = CoPilot
H = Hand Control
IP = i-Pilot
RT 160/EM
RT 80/EM
RT 55/EM
SC = Speed Coil
US2 = Universal Sonar 2
Dual-Composite
Outboard/Engine Steering
Single-Composite
Outboard/Engine Steering
Single-Composite
Outboard/Engine Steering
★Denotes standard industry length for long shaft outboard motor.
★Denotes new model for 2011.
Weedless Wedge 2
—
—
—
Weedless Wedge 2
—
—
—
Weedless Wedge 2
—
—
—
★General guidelines only. See your dealer for specific information on which motor best suits your boat style and intended use.
—
Yes
—
Yes
—
Yes
*Advanced AutoPilot included on i-Pilot.
minnkotamotors.com
SALTWATER MOTORS
66
67