ColorSide Brochure - All Coast Forest Products

ColorSide Brochure - All Coast Forest Products

ABSD 083 C1 ColorSide Lit Pc.
10/29/01
7:56 AM
Page 1 (1,1)
The Beauty
of ColorSide is
More Than Just
Skin Deep ... it’s
built in with the
Pro-1™ Process
ColorSide™ Pre-Finished Sid
15/30-Year Limited Warranty
FIFTEEN-YEAR LIMITED WARRANTY – FINISH
LP warrants the finish on its 1/2” ColorSide™ Siding against peeling, b
cracking, or erosion of the factory finish except for reasonable fade fr
weathering (10 N.B.S. units in 8 years) which would render ABTco™ C
unsuitable, for a period of fifteen years from the date of installation un
conditions of use and exposure.
THIRTY-YEAR LIMITED WARRANTY – SUBSTRATE
LP warrants its ColorSide Siding against defects in material delamina
checking, splitting, cracking and chipping of the base substrate due
manufacturing processes for a period of thirty years from the date of
under normal conditions of use and exposure, providing the siding is
stored, installed, maintained and protected against all sources of moi
accumulation within the wall cavity as specified in ABTco’s Applicatio
NOTICE: THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSE
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR MERCHANT
FITNESS FOR A PARTICULAR PURPOSE.
For a complete warranty contact:
LP Specialty Products
Roaring River, North Carolina 28669
1-800-334-3551
ABSD 083 C1 ColorSide Lit Pc.
10/29/01
7:56 AM
Page 1 (2,1)
e-Finished Siding
mited Warranty
ANTY – FINISH
olorSide™ Siding against peeling, blistering,
finish except for reasonable fade from normal
ars) which would render ABTco™ ColorSide Siding
ears from the date of installation under normal
ColorSide
™
Life’s Worth It.
NTY – SUBSTRATE
gainst defects in material delamination,
hipping of the base substrate due to faulty
iod of thirty years from the date of installation
d exposure, providing the siding is properly
otected against all sources of moisture
as specified in ABTco’s Application Instructions.
F ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
IMPLIED WARRANTIES OR MERCHANTABILITY AND
a 28669
NEW FROM THE SIDING INDUSTRY LEADER ... C O L O R S I D E ™ P R
ABSD 083 C1 ColorSide Lit Pc.
Side
10/29/01
7:56 AM
Page 1 (3,1)
™
Worth It.
N D U S T RY LEADER ... C O L O R S I D E ™ PRE-FINISHED SIDING.
ABSD 083 C1 ColorSide Lit Pc.
10/29/01
7:56 AM
Page 1 (1,2)
under normal conditions of use and exposure, providing the siding is
stored, installed, maintained and protected against all sources of moi
accumulation within the wall cavity as specified in ABTco’s Applicatio
NOTICE: THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSE
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR MERCHANT
FITNESS FOR A PARTICULAR PURPOSE.
For a complete warranty contact:
LP Specialty Products
Roaring River, North Carolina 28669
1-800-334-3551
P R O - 1 ™ THE ROARING
RIVER PROCESS
There is no siding manufacturing process
exactly like it in the world. The hardboard
siding products produced in Roaring River
are unmatched for quality and value.
Four critical steps in the Pro-1 Process are
the key to producing better, more attractive,
stronger hardboard siding. These steps are the
SALES & MARKETING PHONE:
800.566.2282 FAX 704.875.1680
CUSTOMER SE
877.777.6158 F
heart of the Pro-1 ™ Process.
continued on back ...
LP and ABTco are registered trademarks of Louisiana-Pacific Corporation. LP, ColorSide, Fusion Finish and Pro-1 are trademarks
© 2001 Louisiana-Pacific Corporation.All Rights Reserved.Printed in USA.
d exposure, providing the siding is properly
083 C1all
ColorSide
Pc. 10/29/01 7:56 AM
otectedABSD
against
sourcesLit
of moisture
as specified in ABTco’s Application Instructions.
Page 1 (2,2)
F ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
IMPLIED WARRANTIES OR MERCHANTABILITY AND
NEW FROM THE SIDING INDUSTRY LEADER ... C O L O R S I D E ™ P R
a 28669
E:
CUSTOMER SERVICE PHONE:
877.777.6158 FAX 336.696.3404
orporation. LP, ColorSide, Fusion Finish and Pro-1 are trademarks of Louisiana-Pacific Corporation. HB9042SH
acific Corporation.All Rights Reserved.Printed in USA.
6/01
ABSD 083 C1 ColorSide Lit Pc.
10/29/01
7:56 AM
Page 1 (3,2)
N D U S T RY LEADER ... C O L O R S I D E ™ PRE-FINISHED SIDING.
ABSD 083 C1 ColorSide Lit Pc.
10/29/01
7:56 AM
Page 2 (1,1)
You Deserve The Premium Pre-Finished Siding
ABTco ColorSide Pre-Finished Hardb
™
™
How confident are we with its staying power to hold its original, rich color?
So confident, we’ve backed it with a 30-year substrate/15-year finish non-prorated
warranty. Available in nine of the most traditionally desirable and architecturally
pleasing colors, it is proven to withstand the test of time. ABTco™ ColorSide™
Pre-Finished Siding delivers countless superior advantages that put beauty and
labor costs in your favor. It’s another example of how our continual commitment to
meet your needs has made ABTco the siding industry leader for over 30 years.
COLOR VERSATILITY, DURABILITY AND PERFORMANCE
ColorSide is available in nine of the most distinctive and architecturally pleasing colors that allow for design flexibility.
ColorSide’s exclusive factory finish process applies multiple layers along the edges and surface providing a consistent
plank-to-plank color match, low maintenance and long-term exterior durability.
COMPLETE SIDING AND ACCESSORY SYSTEM
ColorSide is the only complete system of pre-finished siding with color-matched accessories offered by
one exterior siding manufacturer. The ColorSide system gives the design flexibility to mix and match siding and
accessory colors.
NATURAL CEDAR GRAIN TEXTURE APPEARANCE
ColorSide’s cedar grain texture complements all architectural styles. The natural cedar grain texture is embossed into
the siding. The exposed surface is never machined or carved maintaining the integrity of the substrate.
HALF-INCH THICKNESS IN FULL 16’ LENGTHS
ColorSide’s 1/2” thick substrate means a stronger and more rigid siding product that lays flatter on the wall.
ColorSide comes in full 16’ lengths providing 33% more* material per piece that allows for quicker installation than other
EAS
INT
Colo
align
insta
cours
get a
entr
splin
MA
Colo
exclu
high-
NO
Colo
fasten
30/1
Colo
15-ye
FR
ABT
for m
sidin
to me
ABSD 083 C1 ColorSide Lit Pc.
10/29/01
7:56 AM
Page 2 (2,1)
Siding
inished Hardboard Siding
rated
lly
ent to
ACCESSORIES
2.
7.
EASY TO INSTALL WITH THE
INTERLOCKING SYSTEM
ColorSide is engineered, interlocking, selfaligning system conceals nails, speeds
installation and assures level, course-tocourse alignment. With no visible nails, you
get a clean, blemish-free look with fewer
entry points for water. There is no plastic
spline that can break during installation.
8.
3.
6.
5.
1.
4.
MANUFACTURED WITH THE PRO-1 PROCESS
bility.
istent
ColorSide is manufactured to the highest standards using our
exclusive Pro 1™ Process. The Pro-1 Process produces excellent,
high-quality, uniform and dimensionally stable siding material.
NO SPECIAL CUTTING TOOLS REQUIRED
ColorSide can be installed using standard cutting and
fastening tools.
30/15 WARRANTY
ColorSide is backed by a 30-year limited substrate warranty with a
15-year finish warranty (non-prorated).
into
han other
FROM THE SIDING INDUSTRY LEADER
ABTco Hardboard Siding has been protecting and beautifying homes
for more than 30 years. Not many others can say that. ColorSide
siding is another example of our continual commitment
to meet our customer’s need.
1.
2.
3.
4.
5.
Outside Corner Base
Outside Corner Cap
Inside Corner
J-Trim
Starter Strip
6.
7.
8.
9.
Caulk
Touch-Up Paint
Joint Moulding
Matching Color Nails
(Not Shown)
PACKAGING
Product
Pcs/Bundles
9.5”x 192”(241mm x 4877mm)
6
Sq.Ft.(m2 )/
Bundle
76 (7.1m 2)
Pcs/Unit
150
Sq.Ft.(m 2)/
Unit
1900 (176.7m2)
ABSD 083 C1 ColorSide Lit Pc.
2.
10/29/01
7:57 AM
Page 2 (3,1)
7.
FUSION FINISH ™ O V E R L AY:
8.
3.
5.
Base
Cap
s/Bundles
6
Fused to our siding’s surface before priming is a natural
fiber filament layer impregnated with resins and linseed oil.
This provides added protection against the elements and
results in a less porous, easier to paint surface.
1.
4.
6.
7.
8.
9.
Caulk
Touch-Up Paint
Joint Moulding
Matching Color Nails
(Not Shown)
Sq.Ft.(m2 )/
Bundle
76 (7.1m 2)
Pcs/Unit
150
Sq.Ft.(m 2)/
Unit
1900 (176.7m2)
EMBOSSED PROFILE:
Our molding process uses matched top and bottom plates
to high-pressure emboss the siding profile. Embossing
provides a beautiful texture and maintains a consistent
product density. Exposed surfaces are never carved or
machined.
OVEN-BAKING:
This additional curing step removes all natural and process
moisture from the siding. Complete dryness adds to the
siding’s physical properties and improves overall strength.
FPO
ABSD 083 C1 ColorSide
Lit Pc. 10/29/01
AM
COMPLETE
SIDING7:57
AND
Colo
fasten
Page 2 (1,2)
ACCESSORY
SYSTEM
ColorSide is the only complete system of pre-finished siding with color-matched accessories offered by
one exterior siding manufacturer. The ColorSide system gives the design flexibility to mix and match siding and
accessory colors.
30/1
Colo
15-ye
NATURAL CEDAR GRAIN TEXTURE APPEARANCE
ColorSide’s cedar grain texture complements all architectural styles. The natural cedar grain texture is embossed into
the siding. The exposed surface is never machined or carved maintaining the integrity of the substrate.
FR
ABT
for m
sidin
to me
HALF-INCH THICKNESS IN FULL 16’ LENGTHS
ColorSide’s 1/2” thick substrate means a stronger and more rigid siding product that lays flatter on the wall.
ColorSide comes in full 16’ lengths providing 33% more* material per piece that allows for quicker installation than other
pre-finished siding products. Each ColorSide plank is equivalent to 10 sq. ft. making project estimating and material
ordering easy.
* vs. 12’ material
FLAGSTONE GRAY
15640
VICKSBURG GREEN
15635
FROST WHITE
15610
PRAIRIE BEIGE
15620
NANTUCKET GRAY
15625
DRIFTWOOD GRAY
15605
NAVA
15
can be installed
standard
cutting
ABSD 083 C1 ColorSide Lit ColorSide
Pc. 10/29/01
7:57 AMusing
Page
2 (2,2)
5. Starter Strip
and
(Not Shown)
fastening tools.
30/15 WARRANTY
PACKAGING
ColorSide is backed by a 30-year limited substrate warranty with a
15-year finish warranty (non-prorated).
into
Product
Pcs/Bundles
9.5”x 192”(241mm x 4877mm)
6
Sq.Ft.(m2 )/
Bundle
76 (7.1m 2)
Pcs/Unit
150
Sq.Ft.(m 2)/
Unit
1900 (176.7m2)
FROM THE SIDING INDUSTRY LEADER
ABTco Hardboard Siding has been protecting and beautifying homes
for more than 30 years. Not many others can say that. ColorSide
siding is another example of our continual commitment
to meet our customer’s need.
han other
rial
ColorSide Lap
COVERAGE
Siding
Width
9 . 5 ” (241mm)
Overlap
1.945” (49.4mm)
Exposure
7.5” ( 1 9 0 . 5 m m )
Sq.Ft.(m 2)/Unit
1000 Sq.Ft.(92.9 m2 )
of wall area (includes 5%
cutting/fitting waste)
1330 (123.7m 2)
Each plank is equal to 10 sq. f t .
C a l c u l a t i o n : Exposure 7 . 5 ” = .625” x 16’ = 10’
12
AY
DRIFTWOOD GRAY
15605
NAVAJO TAN
15630
BAYTOWN BLUE
15615
ADOBE WHITE
15600
ARCHITECTURAL SPECIFICATIONS:
Siding shall be thermoset acrylic latex primed and thermoset pre-finished
ColorSide 1/2” Pre-Finished Lap Siding, (refer to profile and size information)
with Fusion Finishoverlay as manufactured using the Pro-1 Process by ABTco.
*Printed color may not be
true to actual product
(Not Shown)
ABSD 083 C1 ColorSide Lit Pc.
s/Bundles
6
Sq.Ft.(m 2)/
Bundle
76 (7.1m 2)
Pcs/Unit
150
Sq.Ft.(m 2)/
Unit
1900 (176.7m2)
10/29/01
7:57 AM
Page 2 (3,2)
OVEN-BAKING:
This additional curing step removes all natural and process
moisture from the siding. Complete dryness adds to the
siding’s physical properties and improves overall strength.
FPO
Exposure
4mm)
7.5” ( 1 9 0 . 5 m m )
Sq.Ft.(m 2)/Unit
1000 Sq.Ft.(92.9 m2 )
of wall area (includes 5%
cutting/fitting waste)
1330 (123.7m 2)
x 16’ = 10’
RAL SPECIFICATIONS:
lic latex primed and thermoset pre-finished
Lap Siding, (refer to profile and size information)
manufactured using the Pro-1 Process by ABTco.
H U M I D I F I C AT I O N :
The dry siding is then brought back to a specific moisture
content using scientifically controlled systems. The result?
More consistency and dimensional stability in our siding.
Complementing these steps are other Pro-1 Process
advantages: a chip thickness grading system, for better
raw material control; thermoset primer on exposed surfaces
with multiple finishing layers along the edges for tighter,
less porous painting surface; and, extra attention to
packaging so your Pro-1 siding arrives ready to install.
No other hardboard siding manufacturing process is as
comprehensive and controlled as the Pro-1 Process. No
other hardboard product gives you the value and quality
ABTco ColorSide siding provides.