lnstallation - ConservationMart.com

Comments

Transcription

lnstallation - ConservationMart.com
lnstallation
1. Unplug air conditioner electric cord and wrap
tightly around unit as close as possible to front
edge. (Fig. #1) Secure with 3" piece of tape.
2.
Prepare to cut Windblock by first measuring height
and width of unit. Add 6" to height; add 6" to width.
Cut Windblock to size with scissors.
Fig. #1
Center Windblock over front of unit, overlapping
3" on all sides. Fold and tape sqllare comers; then
tape entire edge of Windblock to unit (Fig. #2).
Be sure to overlap tape so that I is affrxed to
Windblock & 'A is affixed to unit. For best resnlts,
rnake cefiain that Windblock covers electric cord,
plug and opening where electric cord exits unit.
NOTE: TAPE ADHERES BEST WHEN
OUTSIDE TEMPERATURE IS ABOVE 35'F.
4.
Fig. #2
Place Endraft Cover over air conditioner. (Fig.#3)
ENDRAFT SIZES
Srn. 12"-14" Hx I8"-2l"W
Md. 15" - 17" H x 22" - 25" W
Lg. I8"- 20" H x 26" - 28" W
Fig. #3
Manufactrrred by Jebb Ploducts hc., P.O.Box 420270, Houston, Texas 77242-0270
Made in U.S.A

Similar documents

illmod 600 12.02.02 2002 18542 since 1999 fire retardant resin

illmod 600 12.02.02 2002 18542 since 1999 fire retardant resin Short Description illmod 600 is an impregnated, precompressed foam tape. Since 1965, this tape has proven itself in driving rain resistant joint sealing in aboveground buildings. Since January 11, 1999, illmod 600 complies with all parameters required by DIN 18542 according to BG1 by the terms of the ift Test Report of January 11, 1999. Consistent high quality is ensured by permanent in-house and independent monitoring. Material Open-cell flexible polyurethane foam impregnated with a flame-retardant artificial resin. Colours ● Anthracite ● Grey Product Advantages ● Independently monitored during driving rain resistance up to 600 Pa (by MPA Bau (Construction), Hannover) ● Open to water vapour diffusion ● Self-adhesive on one side to facilitate installation ● Can be coated with commercially available vinyl emulsion paints ● Meets the RAL-Assembly Requirements Availability On pre-compressed rolls, self-adhesive on one side.

More information