15ppm BILGE SEPARATOR

NEW
15ppm BILGE SEPARATOR
Conforming to Type Approval Standard MEPC 107(49)
Feature & Specifications
●
●
●
●
Exclusively for marine use.
Series: USH−01
Treatment capability: 0.15 m3／h
Exclusive pump／motor is provided inside, so
the Separator system occupies no space.
● The product accredited for type approval by
the Ministry of Land, Infrastructure and
Transport and in accordance with the EC
Marine Equipment Directive.
〈 IMO MEPC.107(49) 〉
● Carried on board the ships of 340 G/T or
below.
Taiko Kikai Industries Co.,Ltd, which has already sent out three
series Oily Water Separators to the market, developed USH
series this time as a compilation of its technologies on the
machine, in response to effectuation of the resolution
MEPC.107(49) (applicable to ships for which the keels are laid
down on and after January 2005).
USH series is a state-of-the-art oily water separator with a
coalescer long in service life and high in performance, providing
remarkable capability of treating not only high-specific gravity
high-viscosity oils, but also emulsions containing surface
active agents or suspended solids that have been deemed it
impossible to treat with conventional coalescers.
In addition, USH series is a customer-satisfaction-oriented oily
water separator which has been developed with maintainability
in mind. The users can operate it without feeling any stress on
themselves even during bilge treatment work on a real ship
and become convinced of its prolonged stable performance.
Apart from other USH series (treatment capability: 0.25 to 5
m3／h), USH−01 has been developed for use on medium- or
small-sized ships. It has high performance for its small size.
In the USH-01 series Oily Water Separator, exclusive pump／
motor has been provided inside for the convenience of use.
This allows reasonable use of the Separator in any limited
installation space.
USH-01
15ppm BILGE SEPARATOR
USH-01
Structure & Dimensions
USH-01
305
190
4−φ15
Mass at empty……………120kg
Mass at operation………154kg
Power source………………AC100V・500VA（DC24V10A
should be for costom-made
articles of product）
Coating………………………Munsell symbol 7.5BG7/2
163
326
No.
280
230
178
138
CL
230
min.300
（Maintenance space）
140
The front
370
416
A−A Arrowy view
ＪＩＳ5Ｋ15Ａ
Treated water outlet
min.800
（Maintenance space）
min.800
（Disassembly space）
175
260
10
14
6
4
1
2
Ｒ1／2
Waste oil
Outlet
Ball valve
780
590
RC1／2
11 Return line
Ａ
20
6
Oil drain cock
7
Water test cock
8
Automatic air
vent valve
9
Strainer
270（Inlet）
290（Return）
Rc1／2 Union
Bilge inlet
163
11 Three-way valve
Installation／Piping Procedures
12 Pump
Siphon breaker
Be sure to exceed a value of
discharge resistance
1/2B
Treated water
discharge line
1
1
1
1
1
1
1
1
1
1
1
STAINLESS STEEL
SUS304
14 Nameplate
1
Standard Fittings
Water test cock
(Periodically check treated water conditions.)
Hopper
Oil drain cock
(Periodically discharge oil)
1/2B
Three-way valve (handle position)
In horizontal direction during normal
operation or while stopped; in vertical
direction during transfer of highconcentration oil to waste oil tank, or
during pump disassembly.
urce
er so
Pow
1/2B
1/2B
（Within 2 to 3 m）
1
Light draft
13 Motor
（0.3 m or more）
Q'ty
1
BRASS
C3602
BRASS
C3602
STAINLESS STEEL
SUS304
BRONZE
CAC
BRASS
C3602
BRONZE
CAC
BRONZE
CAC
Constant flow
10 valve
9
Ａ
50
155
13
135
Pressure gauge
9
12
70
5
3
8
3
4
2
5
Material
MILD STEEL
Body
SS400
Transmitting AL ALLOY CASTING
converter
ADC12
AL ALLOY CASTING
Oil level
ADC12
detector
BRONZE
Solenoid valve CAC
1
7
Name
● Automatic oil drain device
(solenoid valve, oil level detector,
transmitting converter)
● Automatic air vent valve
● Test cock
● Drain plug
● Pressure gauge and cock
● Constant flow valve
● Exclusive pump (avoid an empty
run), motor and V-pulley, V-belt
● Strainer
1/2B
Standard Spare Parts
Sea water
Waste oil tank
Suction strainer
(clean periodically.)
Bilge tank
● Automatic oil drain device spare
parts (fuse)
● Packing
URL http://www.taiko-kk.com
Head Office &
Factory
Tokyo Branch
209-1 Shimotabuse,Tabuse-cho, Kumage-gun, Yamaguchi Pref. 742-1598 Japan
ROTARY
BLOWER
OILY WATER
SEPARATOR
4th floor, Suidobashi MS Building, 3-4-9 Misaki-cho, Chiyoda-ku, Tokyo 101-0061 Japan
TEL：81-3-3221-8551 FAX：81-3-3221-8555 E-mail: [email protected]
Osaka Branch
VACUUM
PUMP
TEL：81-820-52-3114 FAX：81-820-53-1001 E-mail: [email protected]
SEWAGE
TREATMENT
DEVICE
SCREW PUMP
8th floor, KC Building, 3-4-7 Kawara-machi, Chuo-ku, Osaka 541-0048 Japan
TEL：81-6-6231-6241 FAX：81-6-6222-3295 E-mail: [email protected]
GEAR PUMP
CENTRIFUGAL
PUMP
●The dimensions and specifications of the products included in this catalogue may be subject to change without notice for purposes of improvement in their performance. 2005/１１ MUTSUMI