TECHCONNECT2 SOLUTIONS 2009

Comments

Transcription

TECHCONNECT2 SOLUTIONS 2009
TECHCONNECT 2 SOLUTIONS 2 0 0 9
AUDIO
CONNECTIVITY
CONTROL
SIGNAL
MANAGEMENT
BRACKETRY
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2
Why buy Vision Techconnect?
Many manufacturers design a product and then try to find a use for it. Vision products are designed
to solve specific situations AV and IT installers come across daily. With an ongoing Reasearch and
Development program based in the UK, Vision are constantly developing new and innovative
products at great prices.
Vision is an award winning brand recognised for quality and innovation including being the winner of the prestigious AV
manufacturer Award and being a finalist of the 2009 InAVate Commercial Audio Award for the Techconnect amplifier.
With continued innovation, Vision is proud to announce the new Techconnect2 IR Control Module for projectors, plus the
exciting new Techconnect2 range in this catalogue.
The new Techconnect2 range incorporates a host of improvements including:
• New attractive architectural front surround redesigned so that it fits any commonly available dado backbox. It also now
has screw holders moulded into place so the plastic bag full of screws has been eliminated.
• Clip-in modules. Clip-in products are notorious for failing so rigorous testing has taken place in the quest for a tough
reliable system.
• Without deepening the 45mm backbox, 8mm extra space has been added behind the modules to make it easier to
fit cables.
• Better quality phoenix connectors, meaning screws don’t strip if over-tightened.
• By overhauling the backboxes, the push-out sections for the trunking are easier to
remove, and the double-gang backbox can now house the Techconnect Amplifier
power supply to hide it away.
• There is also a new dry-wall mud-ring which allows you to flush-mount the
Techconnect into hollow walls.
All of the improvements serve to shorten installation time
and make the range look better!
2
Te c h c o n n e c t 2
The Techconnect2 Solution
The Techconnect is the only family of products which seamlessly integrates connectivity, audio, and projector control. Mix modules to create consistent, professional,
high quality installations which can be revised at any point. The future-proof modular design makes upgrading and repairs simple.
•
•
•
•
•
Fast installation
Solder-free eliminating expensive ‘go-backs’
Save admin time in ordering specific configurations on traditional fixed versions
Specific configurations saving time – Connection for projectors as standard, removing the need to solder
Cables are all bare wire at one end, making them easy to pull through trunking and shorten – thus allowing a faceplate for any application to be created from two SKUs.
All modules, surrounds, and cables are available individually or offered as convenient packages, mean you only need to order a couple of skus to build a faceplate for any application…
Example 1
Example 2
‘Techconnect Single-Gang Package’ for simple installations…
‘Techconnect Lite Package’ with integrated projector control…
Example made up of: Manu code: TC2-SG10M/Part code: 1643923
Example made up of: Manu code: TC2-LT 1643286 + TC2-CTL1/Part code: 1651050
Example 3
Example 4
‘Techconnect Standard Package’ for complex installations…
‘Techconnect Lite Package’ with integrated audio amplifier…
Example made up of: Manu code: TC2/Part code: 1643907
Example made up of: Manu code: TC2-LT 1643286 + TC-AMP1/Part code: 1669676
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2
CONNECTIVITY
Techconnect Integration
Existing applications tend to be complex
and confuse the end user:
•
•
•
•
•
•
Everything looks different
Compatibility - not designed to work together
Where does the end user plug in their PC and USB?
Do they plug their audio into the faceplate or the amplifier?
No upgrade path or future proofing
Three suppliers and different warranties - difficult to track down
who to call when something not working
• No wonder end users are confused!
4
The Techconnect brings together connectivity, an audio
amplifier, and a projector control system in a clean
installation…
•
•
•
•
•
•
Everything matches!
Compatibility - made to work together
Input connectors clearly identifiable, and there are no un-terminated ports
Modular design allows easy upgrade to include additional inputs
One exceptional warranty covering the complete solution
Simple!
Te c h c o n n e c t 2
Techconnect Quality Cable
“The Techconnect
and Techmount products
offer us the flexibility
and value we need to
provide a great service
for our customers.”
Why buy Vision Cable?
Plug and Play ready – to eliminate manual setup of resolution and colour bit depth, Vision VGA cables
have data lines included as standard
High-resolution – many high resolution projectors and displays require a high bandwith which requires
sufficient copper
High-quality – rely on the quality of Vision cables, with adequate copper and professionally constructed
Competitively-priced – a major cost component of cables is copper, so it follows that cheap cables have
less copper. Compromising on this vital component can result in cable which doesn’t support high resolutions,
and more commonly results in flagging or image jitter. Vision cables are built to a price point, but does not
compromise on quality.
Andy Duck
AV Director
Details
• Ferrite Cores included on VGA cables to eliminate radio-frequency induction noise
• VGA cables feature 3 x 28AWG coax cables for red/green/blue
• All cables are white, allowing them to blend in to white ceiling environments where they are visible
• All cables feature a high quality evenly dispersed outer shield
• Phono and Minijack cables use 26AWG conductors. The S-Video cable uses 28AWG conductors.
www.uppersystem.co.uk
installation:innovation
Approved Trade-Only Vision and Promethean Installer
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2
CONNECTIVITY
Techconnect for Professional Audio installers
All Techconnect parts are available individually, and a range of spares are offered specifically for the pro-audio market. Buy a single-gang or double-gang
backbox and surround and add modules to suit your needs. Remember, the surrounds fit any standard UK backboxes.
Audio-Specific Spares
3.5MM MINIJACK WITH VOLUME
For use with stereo audio cable. Volume pot
provides convenient control of volume, especially
useful when using powered speakers that are not
in easy reach.
Manu code: TC2 3.5MMVOL
Part code: 1643912
2-PHONO WITH VOLUME
For use with stereo audio cable. Volume pot
provides convenient control of volume, especially
useful when using powered speakers that are not
in easy reach.
Manu code: TC2 2PHOVOL
Part code: 1643911
6
6.3MM JACK
Also known as a 1/4” Jack, this socket is
commonly used in professional audio applications
for stereo or balanced audio signal.
Manu code: TC2 6.3MMF
Part code: 1643927
SPEAKON
Also known as NL-4, this is a versatile professional
audio connector exclusively used for speaker cable.
Manu code: TC2 SPEAKON
Part code: 1643933
BLANK
Simple blank modules for blanking off unused slots
in the surround.
4-BARE WIRE TERMINAL
Used for speaker cable, these spring terminals are
quick and secure.
Manu code: TC2 BLANK
Part code: 1643928
Manu code: TC2 SPEAKER
Part code: 1643932
FEMALE XLR
Double-space accommodates a professional audio
XLR connector for microphones and balanced linelevel signals.
Manu code: TC2 XLRF
Part code: 1643906
MALE XLR
Double-space accommodates a professional audio
XLR connector for microphones and balanced linelevel signals.
Manu code: TC2 XLRM
Part code: 1643921
Te c h c o n n e c t 2
SINGLE-GANG UK SURROUND
Single-gang frame which accommodates two
modules. Fits to any standard single-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND
Double-gang frame which accommodates five
modules. Fits to any standard double-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND - BLANK
Double-gang frame which hides TC-AMP1 power
supply in backbox. Fits to any standard doublegang UK backbox (pattress).
Manu code: TC2 SURR1G
Part code: 1622115
Manu code: TC2 SURR2G
Part code: 1622104
Manu code: TC2 SURR2GB
Part code: 1613667
2-PHONO (ALSO KNOWN AS RCA)
High-grade white installation cable. One end preprepared bare-wire for pheonix connectors, and
two moulded connectors on the other end. Cable
for stereo audio.
10m Manu code: 10M2PHO
Part code: 1461163
15m Manu code: 15M2PHO
Part code: 1472523
20m Manu code: 20M2PHO
Part code: 1461171
SINGLE-GANG SURFACE MOUNT UK
BACKBOX
Standard single-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG SURFACE MOUNT UK
BACKBOX
Standard double-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG FLUSH MOUNT UK
MUDRING
Standard double-gang UK flush-mount mud-ring for
hollow walls.
3.5MM MINIJACK HIGH-GRADE
One end pre-prepared bare-wire for phoenix
connectors, and a moulded connector on the other
end. Available in 10, 15, and 20 m lengths.
Manu code: TC2 BACKBOX1G
Part code: 1643922
Manu code: TC2 BACKBOX2G
Part code: 1620805
Manu code: TC2 MUDRING2G
Part code: 1643908
Manu code: TC 10M3.5MM
Part code: 1461164
Manu code: TC15M3.5MM
Part code: 1474524
Manu code: 20M3.5MM
Part code: 1461172
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2
AUDIO
Techconnect for Home Cinema installers
Offering a full range of spare modules for Home Cinema Installers. Buy a single-gang or double-gang backbox
and surround and add modules to suit every need. Remember, Vision surrounds fit any standard UK backboxes.
Home-Cinema-Specific Spares
SINGLE PHONO
For use with RG59 coaxial cable for
composite video signal. Also known as
a Cinch or RCA connector.
Manu code: TC2 1PHO
Part code: 1643910
BNC
Commonly used by AV professionals for
composite video signal transmission or
SDI. Its robust design means it has a
better suited impedance profile, and
locking mechanism.
Manu code: TC2 BNC
Part code: 1643929
8
HDMI
Female socket on the PCB at rear allows
easy connection of an HDMI cable via
the rear. Carries digital audio and
video over one cable.
BLANK
Simple blank modules for blanking off
unused slots in the surround.
Manu code: TC2 BLANK
Part code: 1643928
Manu code: TC2 HDMI
Part code: 1643913
3-PHONO
This 3-phono has interchangeable
coloured rings to denote
yellow/red/white (for composite video
and audio), or red/green/blue (for
component video). Also known as a
Cinch or RCA connector.
Manu code: TC2 3PHO
Part code: 1643926
F AERIAL
Female to female F barrel. F connectors
have a pin and threaded locking
mechanism and are commonly found
on Sky receivers. Note: The UK version
has an imperial thread.
UK/EU Manu code: TC2 F/TC2 FEU
UK/EU Part code: 1643930/1661901
RF AERIAL
With integrated female to female barrel.
RF connectors are used for aerials, and
are commonly found on the rear of VCRs.
RJ45/RJ11
Shielded female to female ethernet
socket, which is backwards compatible
with RJ11 phone jacks.
Manu code: TC2 RF
Part code: 1643914
Manu code: TC2 RJ45
Part code: 1643915
SVIDEO AND 2-PHONO
Useful for connecting a DVD player to
a projector, S-video far superior to
composite video. This also has dual
phono for stereo audio.
SERIAL MALE
9-pin D-sub connector commonly used
for control applications.
Manu code: TC2 SVID2PHO
Part code: 1643917
Manu code: TC2 SERIALM
Part code: 1643931
Te c h c o n n e c t 2
SINGLE-GANG UK SURROUND
Single-gang frame which accommodates two
modules. Fits to any standard single-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND
Double-gang frame which accommodates five
modules. Fits to any standard double-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND - BLANK
Double-gang frame which hides TC-AMP1 power
supply in backbox. Fits to any standard double-gang
UK backbox (pattress).
Manu code: TC2 SURR1G
Part code: 1622115
Manu code: TC2 SURR2G
Part code: 1622104
Manu code: TC2 SURR2GB
Part code: 1613667
2-PHONO (ALSO KNOWN AS RCA)
High-grade white installation cable. One end preprepared bare-wire for pheonix connectors, and two
moulded connectors on the other end. Cable for
stereo audio.
10m Manu code: 10M2PHO
Part code: 1461163
15m Manu code: 15M2PHO
Part code: 1472523
20m Manu code: 20M2PHO
Part code: 1461171
SINGLE-GANG SURFACE MOUNT UK
BACKBOX
Standard single-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG SURFACE MOUNT UK
BACKBOX
Standard double-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG FLUSH MOUNT UK
MUDRING
Standard double-gang UK flush-mount mud-ring for
hollow walls.
3.5MM MINIJACK HIGH-GRADE
One end pre-prepared bare-wire for phoenix
connectors, and a moulded connector on the other
end. Available in 10, 15, and 20 m lengths.
Manu code: TC2 BACKBOX1G
Part code: 1643922
Manu code: TC2 BACKBOX2G
Part code: 1620805
Manu code: TC2 MUDRING2G
Part code: 1643908
Manu code: TC 10M3.5MM
Part code: 1461164
Manu code: TC15M3.5MM
Part code: 1474524
Manu code: 20M3.5MM
Part code: 1461172
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2
CONNECTIVITY
Techconnect for Network Engineers
Offering a full range of spare modules for Home Cinema Installers. Buy a single-gang or double-gang backbox and surround and
add modules to suit every need. Remember, our surrounds fit any standard UK backboxes.
Networking/Telephony-Specific Spares
RJ45/RJ11
Shielded female to female ethernet socket, which is
backwards compatible with RJ11 phone jacks.
Manu code: TC2 RJ45
Part code: 1643915
10
DUAL RJ45/RJ11
Two shielded female to female ethernet sockets,
which are backwards compatible with RJ11 phone
jacks.
BLANK
Simple blank modules for blanking off unused
slots
in the surround.
Manu code: TC2 2RJ45
Part code: 1643916
Manu code: TC2 BLANK
Part code: 1643928
Te c h c o n n e c t 2
SINGLE-GANG UK SURROUND
Single-gang frame which accommodates two
modules. Fits to any standard single-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND
Double-gang frame which accommodates five
modules. Fits to any standard double-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND - BLANK
Double-gang frame which hides TC-AMP1 power
supply in backbox. Fits to any standard double-gang
UK backbox (pattress).
Manu code: TC2 SURR1G
Part code: 1622115
Manu code: TC2 SURR2G
Part code: 1622104
Manu code: TC2 SURR2GB
Part code: 1613667
SINGLE-GANG SURFACE MOUNT UK
BACKBOX
Standard single-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG SURFACE MOUNT UK
BACKBOX
Standard double-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG FLUSH MOUNT UK
MUDRING
Standard double-gang UK flush-mount mud-ring for
hollow walls.
Manu code: TC2 BACKBOX1G
Part code: 1643922
Manu code: TC2 BACKBOX2G
Part code: 1620805
Manu code: TC2 MUDRING2G
Part code: 1643908
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2 P a c k a g e s
CONNECTIVITY
Techconnect2 Packages
Packages are the most convenient and cost-effective way to buy parts for typical AV installations in commercial and public-sector environments. There are three distinct packages:
Standard packages come with a full BECTA-compliant set of parts, ‘Lite’ comes with a basic set of parts for simple installations in a double-gang backbox and surround, and
‘Single-Gang’ which only accommodates two modules and comes with a set of 10m cables in the same box.
Standard Packages
STANDARD TECHCONNECT2 MODULE PACKAGE
With every installation varying, this BECTA-compliant package suits
installers who need to have a package to cover any eventuality.
STANDARD TECHCONNECT2 10M CABLE PACKAGE
The most popular cable package, this package contains cables
which compliment the ‘Standard’ Techconnect Module Package.
STANDARD TECHCONNECT2 15M CABLE PACKAGE
Containing the same cables as the 10m cable package, this package
suits installations where a longer cable is required.
Includes a double-gang UK backbox (surface mount) with a
mounting surround which fits up to 5 modules.
Vision’s installation-grade cable comes with a connector on one end
to plug into the display device and the other end is pre-prepared
bare wire ready for connection to the Techconnect modules. Because
it doesn’t have a connector it fits through small gaps as you feed the
cable, and it can be easily cut to length if you can’t hide the excess.
CABLES INCLUDED:
2 x VGA
1 x S-Video
1 x 1-phono
1 x 2-phono
1 x 3.5mm minijack.
CLIP-IN MODULES INCLUDED:
2 x VGA/Minijack
1 x USB
1 x 3-Phono
1 x S-Video/2-Phono
1 x RJ45
1 x 4-Barewire speaker
3 x Blanking panels.
Manu code: TC2
Part code: 1643907
CABLES INCLUDED:
2 x VGA
1 x S-Video
1 x 1-phono
1 x 2-phono
1 x 3.5mm minijack.
Manu code: TC2-15MCABLES
Part code: 1474526
Manu code: TC2-10MCABLES
Part code: 1474525
Purchase bundles and save…
Standard Module Package + Standard 10m Cable Package
Part code: 1693872
12
Standard Module Package + Standard 15m Cable Package
Part code: 1693873 PRICE
Te c h c o n n e c t 2 P a c k a g e s
Single-gang Package
SINGLE-GANG TECHCONNECT2 MODULE
AND CABLE PACKAGE
For installations where only simple connectivity is
required with a maximum of two modules. Unlike
all the other Techconnect bundles, this package
has cables and modules all in the same box.
Lite Packages
LITE TECHCONNECT2 MODULE PACKAGE
No extras included: this package is for installers
who need a reliable solution day in, day out... with
spare space for two additional modules, or the
Techconnect Amp. Includes a double-gang UK
backbox (surface-mount) with a mounting surround
which fits up to 5 modules.
With two available slots it is ready for the easy
addition of the amplifier module, or the control
module.
CLIP-IN MODULES INCLUDED:
1 x VGA/Minijack
1 x USB
1 x 3-Phono
2 x Blanking panels.
Manu code: TC2-LT
Part code: 1643286
LITE TECHCONNECT2 10M CABLE PACKAGE
Matched to the Lite Techconnect Module Package,
all cables are Vision’s installation-grade cable in
white discreet installation.
All cables are pre-prepared with a connector on
one end to plug into the display device to eliminate
soldering at the top of a ladder, and the other end
is pre-prepared bare wire ready for connection to
the Techconnect modules. The un-terminated end
makes the cables easy to pull, and they can be cut
to length if the excess can’t be hidden.
CABLES INCLUDED:
1 x VGA
1 x 1-phono
1 x 2-phono
1 x 3.5mm minijack.
LITE TECHCONNECT2 15M CABLE PACKAGE
Containing the same cables as the 10m lite cable
package, this package is handy to have on the van
for the odd installation where longer cables are
required.
CABLES INCLUDED:
1 x VGA
1 x 1-phono
1 x 2-phono
1 x 3.5mm minijack.
Manu code: TC2-LT15MCABLES
Part code: 1643288
Includes a single-gang UK backbox (surface mount)
with a mounting surround which fits 2 modules.
SNAP-INS INCLUDED:
1 x VGA/Minijack
1 x USB
1 x 3-Phono
1 x Blanking panels.
CABLES INCLUDED:
1 x VGA
1 x 1-phono
1 x 2-phono
1 x 3.5mm minijack.
Manu code: TC2-SG10M
Part code: 1643923
Manu code: TC2-LT10MCABLES
Part code: 1643287
Purchase bundles and save…
Lite Module Package + Lite 10m Cable Package
Lite Module Package + Lite 15m Cable Package
Part code: 1688515
Part code: 1688516
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2 A m p l i f i e r
AUDIO
Powerful 40 watt digital amplifier for demanding presentation applications
The Techconnect2 Amplifier comes with a surround and backbox for standalone use, or the system can start to be leveraged by integrating it into the same backbox as the connectivity, proving that the Techconnect is far more
than just a modular faceplate: A whole installation in one compact, attractive, future-proof box.
TECHCONNECT2
40W AMPLIFIER
Now in the new Techconnect2
clip-in form-factor! 40W RMS!
Massive 2 x 20w RMS @ 8 ohms
output. Can run at 4 ohms
driving up to four small speakers.
LAPTOP-STYLE POWER SUPPLY
INTEGRATED AV
NO PROTRUDING KNOBS
A switch-mode power supply in included which is
supplied with Velcro dots for attachment under tables
or on walls. Alternately it can be hidden in the new
Techconnect2 backbox. A new blanking surround is
also available for this purpose.
The module can be mounted into a standard
populated Techconnect faceplate.
The low-profile front surface reduces the
risk of damage to the amplifier and
injury by knocking.
TWO INPUTS
Features two stereo inputs wired directly to the rear
of the module. Simply wire the audio input socket
from the faceplate to the rear of the amplifier. There
is deliberately no input on the front panel to remove
end-user confusion about where to plug in.
SECURE AND DESCREET
EASY TO INSTALL AND DEINSTALL
Ideal for a huge range of applications, especially
useful where there is no furniture to sit a normal
amplifier on. Perfect for training rooms, boardrooms,
and classrooms.
Connections are all via removable phoenix
connectors which allow even non-technical end users
to uninstall it very easily if required.
BACKBOX INCLUDED
Comes with its own single-gang Techconnect
backbox and surround.
DIGITAL
Means the power consumption is nil at rest, unlike
analog amplifiers which always use power.
SPECIFICATIONS:
DIMENSIONS: 71 x 42 x 40mm
WEIGHT: 63 grams
COLOUR: White
INPUTS: 2 x Stereo inputs via phoenix connectors
SPEAKER OUTPUTS: Removable Phoenix.
ACCESSORIES INCLUDED:
1 x Single-Gang Techconnect2 Backbox
1 x Single-Gang Techconnect2 Surround
2 x 150mm input cable
2 x Speaker cable 5m long
1 x Euro Power cable 1.8m long
1 x UK Power cable 1.8m long
2 x Velcro Dots for Power Supply.
Manu code: TC2-AMP1
Part code: 1669676
Purchase bundles and save…
14
Techconnect Amplifier PLUS Pair Black SP-1300 Wall Speakers
Techconnect Amplifier PLUS Pair White SP-1300 Wall Speakers
Techconnect Amplifier PLUS Pair White CS-1300 Ceiling Speakers
Part code: 1703068
Part code: 1703069
Part code: 1703070
Te c h c o n n e c t 2 C o n t r o l
CONTROL
Learning IR Control System for any display device
New to the Vision range, the Techconnect2 Control is a learning IR remote control designed specifically to control projectors and flat-panel screens in AV installations. Use it in every installation to standardize the way the
equipment is controlled: the users growing more confident with the equipment leading to fewer technical support calls, and losing the projector remote control will be a thing of the past.
PROJECTOR IR REMOTE CONTROL
DUAL COMMAND
AUDIBLE FEEDBACK
TECHCONNECT2 FAMILY
The new universal IR remote control module takes
over the core functions of the projector remote
control.
The two centre buttons are each capable of learning
two codes each, so for projectors whose remotes
have four individual source select buttons, two
computer inputs can be assigned to one button, and
the two video inputs to the other button.
When buttons are pressed the user hears a
reassuring ‘beep’.
The Techconnect2 Control comes with a single-gang
backbox and surround, but you could choose to have
all your input connectors centralised on a
Techconnect2 faceplate right next to your control
module (as shown). Perfect for training rooms,
meeting rooms, boardrooms, and classrooms!
SECURE
BACKBOX INCLUDED
MODULAR MODULE FORM-FACTOR
Projector remote controls all vary: some have one
button for ‘power on’ and ‘power off’, and others
have two separate buttons. Techconnect2 Control
comes in modular form so can be changed to mimic
the buttons on a projector remote control functions.
Projector remote controls are all too often lost or
stolen, which often results in turning ceiling mounted
projectors on with a broom handle, or by climbing
up on the table. Techconnect2 Control will not be lost
or stolen.
3-STEP PROGRAMMING
1. Press “Learn” on the module.
2. Press the button on the module you want to
“teach”.
3. Point the original remote at the rear of the module
and press the button you want to “teach” it.
A green light confirms the learnt code. That’s it!
Comes with its own single-gang Techconnect
backbox and surround.
BATTERIES INCLUDED
Like all Vision products, we include everything you
need to finish the job. The two AAA batteries are
included and last as long as normal remote control
batteries.
ACCESSORIES INCLUDED:
1 x Single-Gang Techconnect2 Backbox
1 x Single- Gang Techconnect2 Surround
1 x 10m IR Blaster Cable
2 x AAA Batteries
Manu code: TC2-CTL1
Part code: 1651050
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2 Ti l t
Table-mounted motorised
connection faceplate
Coming soon to the Vision Range, the new Techconnect Tilt is a motorised table-mounted connectivity system
for corporate applications.
DISCREET FACEPLATE
When a projector is installed on the ceiling you need
a way of plugging your laptop into it without having
to clamber up on the table. The Techconnect modular
faceplate system makes this simple allowing you to
make the input connectors available on an easily
accessible wall plate.
TABLE MOUNTED
In a boardroom or meeting room where the table is
in the centre connectors need to be in the centre of
the table for easy connection to reduce the risk of
tripping up on ugly cables strewn across the room.
MOTORIZED
Mounted into the centre of the table, touch the button
and the motorized faceplate tilts up offering power,
VGA, audio, and network connections within handy
reach.
SAFETY FEATURES
If a cup is sitting on top it will not power up tipping
coffee everywhere! And the super-robust motor will
not be damaged if a user mistakenly forces the lid
down by hand after use, rather than pressing the
touch button to make it power down. It is designed to
take the rigors of life.
16
SIMPLE TO INSTALL
The hole required in the table requires a 210mm
diameter. The cleanest way to cut this hole is with a
hole-saw drill bit, such as a Starrett STRHS210 with
an arbour – the same drill bit used to fit the CS-1300
Ceiling speakers.
ENCLOSED BASED
The Techconnect Tilt is completely enclosed and safe.
ACCESSORIES INCLUDED:
2 x VGA with audio modules
2 x RJ45 modules
2 x Blank modules
1 x UK Power Module
1 x EU Power Module
1 x Euro IEC Power cable 2m long
1 x UK IEC Power cable 2m long.
Manu code: TC2-TILT
Part code: 1584482
CONNECTIVITY
“We are totally focussed on high quality installations. The Techconnect
and Techmount are our preferred installation products every time.”
Craig Broughton, Operations Director
Jon Hempson, Managing Director
www.midlandtechnologies.co.uk
installation:innovation
Approved Trade-Only Vision and Promethean Installer
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2 S p a r e M o d u l e s
CONNECTIVITY
Full List of Spare Modules
3.5MM MINIJACK WITH VOLUME
For use with stereo audio cable. Volume pot
provides convenient control of volume, especially
useful when using powered speakers that are not in
easy reach.
Manu code: TC2 3.5MMVOL
Part code: 1643912
2-PHONO WITH VOLUME
For use with stereo audio cable. Volume pot
provides convenient control of volume, especially
useful when using powered speakers that are not in
easy reach.
Manu code: TC2 2PHOVOL
Part code: 1643911
BLANK
Simple blank modules for blanking off unused slots
in the surround.
Manu code: TC2 BLANK
Part code: 1643928
SPEAKON
Also known as NL-4, this is a versatile professional
audio connector exclusively used for speaker cable.
Manu code: TC2 SPEAKON
Part code: 1643933
P
FEMALE XLR
Double-space accommodates a professional audio
XLR connector for microphones and balanced linelevel signals.
Manu code: TC2 XLRF
Part code: 1643906
MALE XLR
Double-space accommodates a professional audio
XLR connector for microphones and balanced linelevel signals.
Manu code: TC2 XLRM
Part code: 1643921
BNC
Commonly used by AV professionals for composite
video signal transmission or SDI. Its robust design
means it has a better suited impedance profile,
and locking mechanism.
Manu code: TC2 BNC
Part code: 1643929
HDMI
Female socket on the PCB at rear
allows easy connection of an HDMI
cable via the rear. Carries digital
audio and video over one cable.
The US version has a socket on the rear
perpendicular to the front surface.
UK Manu code: TC2 HDMI
UKPart code: 1643913
US Manu code: TCUS HDMI
US Part code: 1661957
6.3MM JACK
Also known and a 1/4” Jack, this socket is
commonly used in professional audio applications
for stereo or balanced audio signal.
Manu code: TC2 6.3MMF
Part code: 1643927
18
4-BARE WIRE TERMINAL
Used for speaker cable, these spring terminals are
quick and secure.
Manu code: TC2 SPEAKER
Part code: 1643932
SINGLE PHONO
For use with RG59 coaxial cable for composite
video signal. Also known as a Cinch or RCA
connector.
Manu code: TC2 1PHO
Part code: 1643910
3-PHONO
This 3-phono has interchangeable coloured rings to
denote yellow/red/white (for composite video and
audio), or red/green/blue (for component video).
Also known as a Cinch or RCA connector.
Manu code: TC2 3PHO
Part code: 1643926
F AERIAL
Female to female F barrel. F connectors
have a pin and threaded locking
mechanism and are commonly found
on Sky receivers. The UK version has
an imperial thread. The EU version is
suitable for everywhere else in the world.
SERIAL MALE
9-pin D-sub connector commonly used for control
applications.
FEMALE VGA
Common 15-pin D-Sub type connector for PC
display outputs.
VGA-F D-SUB AND MINIJACK
Common 15-pin D-Sub type connector with a
female socket on the rear rather than a phoenix
connector. 3.5mm Minijack audio socket included.
Manu code: TC2 SERIALM
Part code: 1643931
Manu code: TC2 VGAF
Part code: 1643901
RJ45/RJ11
Shielded female to female ethernet socket, which is
backwards compatible with RJ11 phone jacks.
MALE VGA
Common 15-pin D-Sub type connector for PC
display outputs.
Manu code: TC2 RJ45
Part code: 1643915
Manu code: TC2 VGAM
Part code: 1643905
SVIDEO AND 2-PHONO
Useful for connecting a DVD player to a projector,
S-video far superior to composite video. This also
has dual phono for stereo audio.
DUAL RJ45/RJ11
Two shielded female to female ethernet sockets,
which are backwards compatible with RJ11
phone jacks.
VGA-F AND MINIJACK
Common 15-pin D-Sub type connector for PC
display outputs. 3.5mm Minijack audio socket
included.
USB B (ON FRONT) TO A
This has an “A” type socket on the rear as found
on a laptop chassis, and a “B” type socket on the
front as found on a printer chassis.
Manu code: TC2 SVID2PHO
Part code: 1643917
Manu code: TC2 2RJ45
Part code: 1643916
Manu code: TC2 VGAF3.5MM
Part code: 1643902
Manu code: TC2 USBB
Part code: 1643919
Manu code: TC2 VGAF3.5MMD
Part code: 1643904
UK Manu code: TC2 F
UK Part code: 1643930
EU Manu code: TC2 FEU
EU Part code: 1661901
RF AERIAL
With integrated female to female barrel. RF
connectors are used for aerials, and are commonly
found on the rear of VCRs.
Manu code: TC2 RF
Part code: 1643914
installation:innovation
USB A (ON FRONT) TO B
This has a “B” type socket on the rear as
found on a as found on a printer chassis, and an
“A” type socket on the front laptop chassis.
Manu code: TC2 USBA
Part code: 1643918
www.visionaudiovisual.com • +44(0)844 391 3312
Te c h c o n n e c t 2 S p a r e M o u n t i n g H a r d w a r e
CONNECTIVITY
Spare Mounting Hardware – UK/Europe/Africa
SINGLE-GANG UK SURROUND
Single-gang frame which accommodates two
modules. Fits to any standard single-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND
Double-gang frame which accommodates five
modules. Fits to any standard double-gang UK
backbox (pattress).
DOUBLE-GANG UK SURROUND - BLANK
Double-gang frame which hides TC-AMP1 power
supply in backbox. Fits to any standard double-gang
UK backbox (pattress).
EUROPEAN TRUNKING ADAPTOR
Replaces the function of a backbox for five different
common sizes of Dado trunking in Europe. Works for
single-gang or double-gang surrounds.
Manu code: TC2 SURR1G
Part code: 1622115
Manu code: TC2 SURR2G
Part code: 1622104
Manu code: TC2 SURR2GB
Part code: 1613667
Manu code: TC
ADAPTOR
Part code: 1461181
SINGLE-GANG SURFACE MOUNT UK
BACKBOX
Standard single-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG SURFACE MOUNT UK
BACKBOX
Standard double-gang UK surface-mount backbox
(pattress) 45mm deep.
DOUBLE-GANG FLUSH MOUNT UK
MUDRING
Standard double-gang UK flush-mount mud-ring for
hollow walls.
Manu code: TC2 BACKBOX1G
Part code: 1643922
Manu code: TC2 BACKBOX2G
Part code: 1620805
Manu code: TC2 MUDRING2G
Part code: 1643908
Techconnect2 Spare Mounting hardware – Asia/Pacific/Australia/New Zealand
20
DOUBLE-GANG 2 MODULE AU SURROUND
Double-gang portrait frame which accommodates
two modules. Fits any standard double-gang
Australian backbox (e.g. Clipsal).
DOUBLE-GANG 3 MODULE AU SURROUND
Double-gang portrait frame which accommodates
three modules. Fits any standard double-gang
Australian backbox (e.g. Clipsal).
Manu code: TCAU SURR2
Part code: 1647885
Manu code: TCAU SURR3
Part code: 1598804
DOUBLE-GANG FLUSH MOUNT AU MUDRING
Standard double-gang Australian flush-mount
mud-ring for hollow (or dry) walls.
Manu code: TCAU MUDRING
Part code: 1584557
Te c h c o n n e c t 2 S p a r e M o u n t i n g H a r d w a r e / C a b l e s
Spare Mounting hardware – US/Canada
3-GANG US SURROUND
3-gang frame which accommodates six
modules. Fits any standard 3-gang US
backbox.
3-GANG FLUSH MOUNT US
MUDRING
Standard 3-gang US flush-mount
mud-ring for hollow (or dry) walls.
1-GANG US SURROUND
3-gang frame which accommodates six
modules. Fits any standard 3-gang US
backbox.
1-GANG FLUSH MOUNT US
MUDRING
Standard 1-gang US flush-mount
mud-ring for hollow (or dry) walls.
3-GANG SURFACE MOUNT US
BACKBOX
Standard 3-gang US surface-mount
backbox (pattress) 45mm deep.
Manu code: TCUS SURR3G
Part code: 1532067
Manu code: TCUS MUDRING3G
Part code: 1643924
Manu code: TCUS SURR1G
Part code: 1643925
Manu code: TCUS MUDRING1G
Part code: 1643909
Manu code: TCUS BACKBOX3G
Part code: 1475358
S-VIDEO HIGH-GRADE WHITE
INSTALLATION CABLE
One end pre-prepared bare-wire for
phoenix connectors, and a moulded
connector on the other end.
3.5MM MINIJACK HIGH-GRADE
One end pre-prepared bare-wire for
phoenix connectors, and a moulded
connector on the other end.
VGA HIGH-GRADE BEIGE
INSTALLATION CABLE
One end pre-prepared bare-wire for
phoenix connectors, and a moulded
connector on the other end. Ferrite core
included. Quality individually shielded
coaxial cables for red, green and blue.
Techconnect2 Spare Cables
1-PHONO (ALSO KNOWN AS RCA)
High-grade white installation cable.
One end pre-prepared bare-wire for
phoenix connectors, and a moulded
connector on the other end. Coaxial
cable for composite video.
2-PHONO (ALSO KNOWN AS RCA)
High-grade white installation cable.
One end pre-prepared bare-wire for
phoenix connectors, and two moulded
connectors on the other end. Cable for
stereo audio.
10m Manu code: 10M1PHO
Part code: 1461162
10m Manu code: 10M2PHO
Part code: 1461163
15m Manu code: 15M1PHO
Part code: 1472522
20m Manu code: 20M1PHO
Part code: 1461170
15m Manu code: 15M2PHO
Part code: 1472523
20m Manu code: 20M2PHO
Part code: 1461171
10m Manu code: 10MSVID
Part code: 1461165
15m Manu code: 15MSVID
Part code: 1461167
20m Manu code: 20MSVID
Part code: 1461173
installation:innovation
10m Manu code: TC 10M3.5MM
Part code: 1461164
15m Manu code: TC15M3.5MM
Part code: 1474524
20m Manu code: 20M3.5MM
Part code: 1461172
10m Manu code: TC 10MVGA
Part code: 1461166
15m Manu code: TC15MVGA
Part code: 1461168
20m Manu code: 20MVGA
Part code: 1461174
www.visionaudiovisual.com • +44(0)844 391 3312
Vision Audio
AUDIO
AV-1301 50w Amplifier
STEREO AMPLIFIER
With a whopping 2 x 25w (RMS at 8 ohms) of
power the AV-1301 has powerful sound
reinforcement capabilities for a huge range of
applications. Optimised to drive low-impedance
speakers with a power handling of up to 80w such
as the Vision SP-1300 or CS-1300 loudspeakers, it is
ideal for use in corporate training rooms, meeting
rooms, and classrooms.
FLEXIBLE
For flexibility the AV-1301 has four stereo inputs via
stereo phono (RCA) connectors. This means there are
a number of input options for a typical installation
environment. Output from iPods can be amplified,
also laptops and PCs, cassette, CD, DVD, VHS,
minidisk, tuners – anything.
READY TO INSTALL
Two thick 5m speaker cables are included, plus two
patch cables are included to allow instant easy
connection of AV peripherals: 1 x 2-phono to 2phono cable, and 1 x 2-phono to 3.5mm minijack.
There is no preparation time in the warehouse or
onsite; just takeit out of the box and go!
SECURE AND ROBUST
A unique feature of the AV-1301 is the “Kensington
Lock” slot on the rear panel, which allows you to
tether the amplifier to an immovable object, thus
securing the amplifier.
SPECIFICATIONS:
AMPLIFIER DIMENSIONS: 420 x 290 x 100mm
CARTON DIMENSIONS: 500 x 360 x 175mm
PACKAGED WEIGHT: 5.6 kg
COLOUR: Black
INPUTS: 4 x Stereo inputs via phono connectors
2 x microphone connectors via 6.3mm jack
SPEAKER OUTPUTS: Binding posts.
ACCESSORIES INCLUDED:
1 x 2-phono to 2-phono cable 2m long
1 x 2-phono to 3.5mm minijack cable 2m long
1 x Euro Figure-8 Power cable 2m long
1 x UK Figure-8 Power cable 2m long.
Manu code: AV-1301
Part code: 1461107
Purchase bundles and save…
22
AV-1301 PLUS Pair Black SP-1300 Wall Speakers
AV-1301 PLUS Pair White SP-1300 Wall Speakers
AV-1301 PLUS Pair White CS-1300 Ceiling Speakers
Part code: 1520212
Part code: 1532095
Part code: 1540772
T h e Te c h c o n n e c t S o l u t i o n
SP-1300 Wall Speakers
With a frequency response of 80Hz-20Khz and power handling of 70 watts, these loudspeakers ensure
music and voice are all richly reproduced.
LOUD AND CLEAR
Sophisticated, elegant, and compact: perfect when
you need clear, powerful audio reinforcement. Match
these to a low-impedance amplifier and it is amazing
how big they sound!
BLACK OR WHITE
The SP-1300 speakers come in pairs, and are
available in white or black to blend in with the
installation environments décor.
COLOUR-CODED BALL-JOINT BRACKETS
INCLUDED
Sturdy brackets with easy adjustment. The ball-joint
bracket allows exact positioning to create an
expansive stereo image. White speakers come with
white brackets, and black speakers come with black
speakers.
SAFETY FIRST
Includes a fall-arrest safety cable to remove the risk
of injury.
TUNED FOR PRESENTATIONS
The 4” lower cone is dedicated to bass and mid,
which gives clear, crisp midrange. The 3/4” silk
dome tweeter adds needle-sharp top end all the way
to 20kHz and the 86dB sensitivity indicates that more
effort has gone into making these loudspeakers
sound good, rather than just being outright loud.
SPECIFICATIONS:
SPEAKER DIMENSIONS: 230 x 160 X 120mm
SPEAKER WEIGHT: 3.5 kg (per pair)
CARTON DIMENSIONS: 287 x 171 x 240mm
CARTON WEIGHT: 4 kg (per pair)
COLOUR: Black or white.
ACCESSORIES INCLUDED
2 x Ball-point wall brackets
2 x Fall-arrest cables
1 x Adjustment hex key.
Black/White Manu code: SP-1300B/SP-1300W
Black/White Part code: 1461158/1461159
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Vision Audio
CS-1300 Ceiling Speakers
Ceiling speakers are easy to install, discreet, and more importantly spread sound evenly throughout a room. Everybody
in the room should hear the audio at the same spl (sound pressure level), rather than those at the front being blasted!
HIGH-QUALITY COMPONENTS
The CS-1300 ceiling speakers feature a two-way
design giving full-bandwidth sound with control and
clarity. The main driver is a 6.5” polypropylene
cone complimented by a ferro-fluid cooled silk
tweeter set in a swivel mount for fine tuning of the
stereoscopic image.
FULL RANGE
These low impedance speakers don’t sacrifice
frequency range in the way that 100/70v speakers
inherently do, meaning lower bass and higher treble.
EASY FIT
Simple to mount into false ceiling tiles, the CS-1300
is the audio contractor’s ultimate product for ease of
installation. Get a 210mm hole-saw from your local
hardware supplier (such as a Starrett STRHS210 with
an arbor), drill a hole, and fit the speaker! It’s clean
and easy. Each package contains a pair of speakers
and a cardboard cut-out guide.
24
UNOBTRUSIVE
The contemporary grille design makes the finished
installation less intrusive than wall-mounted speakers,
resulting in a more professional installation finish.
They match the ceiling tiles, and can be positioned
throughout a room for maximum dispersion.
SPECIFICATIONS:
SPEAKER DIMENSIONS 235 x 105mm
(91/4 x 41/8”)
CUTOUT SIZE: 202mm (8”)
MOUNTING DEPTH: 95mm (33/4”)
SPEAKER WEIGHT: 3KG (per pair)
CARTON DIMENSIONS: 285 x 268 X 272mm
CARTON WEIGHT 3.2 kg (per pair)
COLOUR: White.
ACCESSORIES INCLUDED:
1 x Cut-out template.
Manu code: CS-1300
Part code: 1461131
AUDIO
SIGNAL
MANAGEMENT
Vision Signal Management
1:2 VGA Splitter
There are many applications where you need to distribute your PC output to more than one monitor, and the
Vision VGA splitter is a convenient low-cost VGA distribution amplifier for that purpose.
MOUNTING EARS
It features a purpose-built chassis with mounting ears
which allow easy attachment under tables, in
cupboards, or lecterns.
HD RESOLUTION
With a maximum resolution of 1920 x 1440 the
VGA Splitter is capable of transmitting HD signals.
BUFFERS
A computer image is split over 5 cables for
transmission and is very weak, so it’s important to
keep each of the five signals at their strength to
achieve full signal-to-noise ratio.
SPECIFICATIONS:
BOX DIMENSIONS: 230 x 105 x 55mm
AMPLIFIER DIMENSIONS: 135 x 95 x 40mm
PACKAGED WEIGHT: 730 grams
PRODUCT WEIGHT: 480 grams
COLOUR: Silver.
ACCESSORIES INCLUDED:
External 110-230v Power Transformer
2 x Mounting Ears.
UK Manu code: VGASPLITTERUK
Part code: 1461224
EU Manu code: VGASPLITTEREURO
Part code: 1474527
BOOSTS
Every time you introduce a join into a cable it
reduces the signal strength by 3dB, so it’s important
to boost the signal as you go. Simply by introducing
the VGA Splitter into the chain you can ensure
maximum quality transmission over a long cable run.
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
Vision Bracketr y
BRACKETRY
Techmount Universal Projector Ceiling Mount
Vision’s universal projector ceiling mount comes with a 1.1m pole which is cut to length onsite, meaning infinitely variable length. It can be quickly assembled in a number of different configurations: including “flush-mount”
where the projector is as close to the ceiling as possible, or if a longer pole is needed, a 1m male-to-female extension pole is offered.
DRILLING JIG INCLUDED
A spanner and hex-key for assembly are included,
plus there is a square drilling jig included so you can
easily and accurately drill 9mm holes into the pole to
complete assembly.
CATHEDRAL-READY
For a sloping ceiling there is a tilting mechanism
included.
EVERYTHING INCLUDED!
The TM-1200 uses security pin-hex bolts through-out,
plus a fall-arrest cable is included for additional
safety, and a retrofittable trim disc is included to
finish false-ceiling holes tidily.
SPECIFICATIONS:
POLE LENGTH: 1.1m
BOX DIMENSIONS: 1300 x 160 x 90mm
PACKAGED WEIGHT: 6 kg
SAFE WORKING LOAD: 20 kg
COLOUR: White.
ACCESSORIES INCLUDED:
1 x H50 Pin-Hex key
1 x 17mm Spanner
4 x M2.5 43mm pan slot for Optoma & Acer
4 x M3 43mm screws
4 x M4 43mm screws
4 x M5 43mm screws
4 x M6 43mm screw
4 x M8 50mm Ceiling Fixtures with rawl plugs
1 x Drilling Jig
1 x Safety Tether
1 x Ceiling Trim Disc.
Manu code: TM-1200
Part code: 1562435
Optional 1m Extension Pole with integrated
coupler
Manu code: TM-1200 EXT1M
Part code: 1562436
OBTRUCTION-FREE CABLE MANAGEMENT
A unique system is offered, which leaves cable
access clear – even for big VGA connectors.
26
FITS 99.9% PROJECTORS
The TM-1200 has a selection of screws to suit most
projectors including unusual screws for Optoma and
Acer projectors, and now M6 screws for larger
projectors – for example Christie.
Vision Distributors
Australia
France
Italy
Slovenia
Integration Supplies
Comil
Intervideo srl
Svarog informacijske tehnologije d.o.o.
12 Prestbury Drive, Vermont South, VIC 3133, Australia
4 avenue de la Résistance - BP1, 92370, Chaville, France
Via E.Fermi 24, 37026 SETTIMO di Pescantina, Verona, Italy
Razlagova 22, SI – 2000 Maribor, Slovenia
Phone: +61 (3) 9803 2787
Fax: +61 (3) 9803 2787
Web: www.isupplies.com.au
E-mail: [email protected]
Phone: +33 (0) 1 47 50 89 40
Fax: + 33 (0) 1 47 09 53 06
Web: www.comil.com
E-mail: [email protected]
Phone: +39 (0) 45 890 0022
Fax: +39 (0) 45 890 0502
Web: www.intervideosrl.com
E-mail: [email protected]
T: +386 2 228 24 25
F: +386 2 228 24 57
Web: www. svarog.si
E-mail: [email protected]
Canada
Greece
Latin America
Spain
If you are interested in becoming a Vision
distributor please contact Stuart Lockhart:
[email protected]
Stampede Canada
Interactivo
Stampede Latin America
Charmex Internacional, S.A.
1200 Aerowood Drive, Units 25 & 26, Mississauga,
Ontario, Canada L4Z 1R5
10 Eratous St,Alimos, GR 174 55, Athens, Greece
3750 NW 114th Ave, Miami, FL 33178
Maresme, 103-105, 08019 Barcelona, Spain
Phone: +30 2109802180-181
Fax: +30 2109802282
Web: www.interactivo.gr
E-mail: [email protected]
Phone: (+ 305) 470 1220
Fax: (+1 716) 635 9484
Web: www.stampedeglobal.com
E-mail: [email protected]
Phone: +34 (0) 902 468 469
Fax: +34 (0) 933 080 642
Web: www.charmex.net
E-mail: [email protected]
Iceland
Netherlands
UK
SENSE ehf.
Kerèn Presentatie Systemen
Maverick Presentation Products
Hlidarsmari 3, Kopavogur, Iceland
8 Louis Armstrongweg, Almere 1311 RK, Netherlands
Hampshire House, Wade Rd, Basingstoke RG24 8NE, UK
Phone: +354 585 3811
Fax: +354 585 3811
Web: www.sense.is
E-mail: [email protected]
Phone: +31 (0) 36 535 00 63
Fax: +31 (0) 36 546 59 69
Web: www.keren.nl
E-mai: [email protected]
Phone: (+44) 0845 60 70 470
Fax: (+44) 0845 60 70 471
Web: www.maverick.co.uk
E-mail: [email protected]
Ireland
Portugal
Square One Distribution Ltd
Charmex Internacional, S.A.
Hampshire House, Wade Rd, Basingstoke RG24 8NE, UK
Station House, Station Road, Shankill, Co. Dublin
Maresme, 103-105, 08019 Barcelona, Spain
Phone: +353 1 239 3255
Fax: +353 1 282 3720
Web: www.squareone.ie
Email: [email protected]
Phone: +34 (0) 902 468 469
Fax: +34 (0) 933 080 642
Web: www.charmex.net
E-mail: [email protected]
Phone: (+44) 0870 060 3344
Fax: (+44) 0845 60 70 471
Web: www.computer2000.co.uk
E-mail: [email protected]
Israel
South Africa
Kivunim Amdor Systems Ltd.
Solution Technologies Limited
3332 Walden Ave, Suite 106, Depew, NY 14043, USA
19 Hamashbir, Holon Industrial Zone, 58117 Israel
Cnr Surrey & Republic Rd, Randburg, Gauteng,
2160 South Africa
Toll Free Phone: (+1 800) 398 5652
Buffalo Office: (+ 716) 635 9474
Miami Office: (+ 305) 470 1220
Fax: (+1 716) 635 9484
Web: www.stampede-usa.com
E-mail: [email protected]
Phone: (+1 905) 602 0888
Fax: (+1 905) 602 0777
Montreal Phone: (+ 514) 783 0783
Web: www.stampede-can.com
E-mail: [email protected]
Denmark
DS Display & Data
Hedeager 2, DK-2605, Brondby, Denmark
Phone: +45 36 720 720
Fax: +45 36 720 722
Web: www.ds-display.dk
E-mail: [email protected]
Egypt
Computer 2000
Gimpex Audio Visual
19 Adly St., Cairo, Egypt
Tel: +2(02) 395 0760 - 390 9897
Fax: +2(02) 393 2460
Web: www.gimpex-egypt.com
E-mail: [email protected]
USA
Finland
Stampede USA
VisualService Finland Oy
Äyritie 8 B, 01510 Vantaa, Finland
Phone: +358 (010) 832 9300
Fax: +358 (09) 853 2189
Web: www.visualservice.fi
E-mail: [email protected]
Phone: +972 (0)3650 0666
Fax: +972 (0)3650 0777
Web: www.kivunim.co.il
E-mail: [email protected]
Phone: +27 (0) 11 789 9549
Fax: +27 (0) 11 789 9574
Web: www.soltech.co.za
E-mail: [email protected]
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312
installation:innovation
www.visionaudiovisual.com • +44(0)844 391 3312