Electric actuators with fail safe unit

ELECTRIC ACTUATORS WITH FAIL SAFE UNIT
For automatic opening or closing of a valve in the event of an emergency
In recent years, safety requirements in process plants have
become increasingly demanding. Even in case of emergency,
the system must be safe for persons and the environment.
Actuators play a crucial role here, since it is their task to
open or close a valve in case of emergency and to ensure
that the plant remains in safe condition.
With their new FQM fail safe unit, AUMA offer innovative
and safe actuator solutions for automatic operation of valves
in case of emergencies making use of stored mechanical
energy.
The FQM fail safe unit meets the requirements of safetyrelated applications up to SIL 2/SIL 3 and is basically maintenance-free. An explosion-proof version is also available.
MECHANICAL SOLUTION FOR UTMOST SAFETY
When relying on safe opening or closing of a valve, mechanical
actuator solutions provide top safety. In case of need, the new
FQM fail safe unit generates the required torque by means of a
constant force spring purely on a mechanical basis. No electrical
power is required for fail safe operation.
CONSTANT TORQUE
The constant force spring motor with patent pending provides a
constant torque during fail safe operation and this across the
complete travel. During standard operation, the constant force
spring is disengaged and is not operated. As a consequence,
actuator sizing can be relatively small.
VARIABLE RUNNING SPEEDS
Running speeds for fail safe operations are adjustable. Furthermore,
the actuator can operate the valve into the defined end position at
reduced speed. This avoids pressure peaks within the pipeline and
protects the valve.
ELECTRIC PART-TURN ACTUATORS WITH FQM FAIL SAFE UNIT
2
EASY INTEGRATION
VERSATILE IMPLEMENTATION
Actuators with FQM fail safe unit are integrated into systems in
the same way as standard AUMA actuators. The fail safe unit
seamlessly adapts to the modular AUMA product design. It is
combined with AUMA SQ part-turn actuators or AUMA SA
multi-turn actuators paired with GS part-turn gearboxes.
AUMA actuators with FQM fail safe unit are particularly suited to
automate butterfl y valves as well as ball and plug valves at a swing
angle of up to 90°. They are the perfect choice if part-turn actuators require safe opening or closing in case of emergencies.
EASY RETROFITTING
Thanks to their identical interfaces, the fail safe unit can be
retrofi tted within existing plants. For example, if the safety
requirements for an application have intensifi ed. And even better,
the already installed actuator may often be retained.
Industrial applications
Fail safe actuators are used in all markets and applications. In water
reservoirs, they prevent drainage in case of burst pipes, for
example. Steam generating boilers in power plants and fire
protection measures in road and railway tunnels are further typical
examples.
Applications in the oil & gas industry
The oil & gas industry imposes highest quality standards not least
due to the superior danger of potential explosions. The explosionproof fail safe unit caters for the required safety level. Overfill
protections in tank farms, drainage protection in tanks and
pipelines or use in gas regulating and metering stations are merely
a few of the versatile implementations in the oil & gas industry.
3
2015.06.08
Integration into the DCS is made as for the standard devices by
means of AC integral controls. Operating concept, interfaces and
communication remain homogeneous across all valves installed
within the plant.
FUNCTION
FQM fail safe unit
AUMA part-turn actuators with fail safe unit ensure that
the valve is operated to a safe position in the event of
power failure or in case an emergency signal is issued.
Selection can be made whether the valve is to be
operated into position OPEN or CLOSED.
Normal operation
All AUMA actuator functions are available as usual in
normal operation. The torque is transmitted directly
from the actuator through the fail safe unit to the valve.
Fail safe operation
The fail safe operation is completely independent of the
power supply and is exclusively supplied on a mechanical basis by means of the energy stored in the coiled up
constant force spring.
SQ
A fail safe operation is initiated in case of power failure
or if an emergency signal is issued. This is independent
of AC actuator controls.
The constant force spring is activated during fail safe
operation and transmits the generated torque to the
valve by means of a planetary gearing. During the
complete fail safe operation, the spring provides an
almost constant torque.
FQM
1
1 Constant force spring motor
The core of the fail safe unit is a mechanical constant
force spring motor providing the required torque to
open or close the valve in case of an emergency.
When connecting the actuator to the mains and after
acknowledgement by the DCS, the fail safe unit is
initialised and the constant force spring is fully wound
by means of an integrated electric motor. For this, the
spring is wrapped in inverted direction on a drum.
During fail safe operation, the integrated electric motor
additionally acts as a brake, allowing setting of various
running speeds during fail safe operation.
4
SA
AC
GS
Solenoid with toggle lever
By means of a toggle lever, the solenoid retains the spring in the
fully wound position. In case of power failure or if an emergency
signal is issued, the solenoid releases the spring and initiates the fail
safe operation.
2
2
3
3 Planetary gearing
The planetary gearing acts as overriding gear arrangement. In
normal operation, it transmits the drive shaft movement directly to
the part-turn movement of the valve. During standard operation,
the constant force spring is disengaged and is not operated by the
actuator.
During the fail safe operation, the planetary gearing transmits the
energy stored in the spring to the valve. Here, the actuator is
inactive.
4 End stops with integral end position switches
The internal end stops limit the swing angle of the valve. The end
position switches are automatically set during the setting procedure
of end positions OPEN and CLOSED and do not require separate
adjustment.
4
5 Valve attachment
The interface to the valve is made in compliance with EN ISO 5211.
The torque is transmitted from the output drive shaft to the valve by
means of a splined coupling which is available in different versions:
unbored, with square bore, two-flat or as bore with keyway.
5
Electric part-turn actuator
FQM fail safe unit can be combined with both AUMA SQ part-turn
actuators as well as with AUMA SA multi-turn actuators paired
with GS part-turn gearboxes. The electric actuator can thus be
individually and perfectly adjusted to the application requirements:
> SQ part-turn actuators for open-close duty,
SQR for modulating duty as well as
SQEx and SQREx for potentially explosive atmospheres
> SA multi-turn actuators paired with GS part-turn gearboxes for
open-close operation, SAR for modulating operation, as well as
SAEx and SAREx for potentially explosive atmospheres
AC integral actuators controls
AC integral actuator controls assume communication control
between DCS and actuator. Controls are available with various interfaces to the DCS – allowing both parallel signal transmission and
fi eldbus communication. Supported are, for example, Profibus DP,
Modbus RTU, DeviceNet, Foundation Fieldbus as well as HART and
Wireless HART.
Advanced diagnostic functions enable preventive maintenance and
integration of actuators into asset management systems. Integral
local controls also allow for local actuator operation.
Advantages of the AUMA constant force spring motor
With the constant force spring with patent pending by AUMA, the
spring supplies an almost constant torque across full travel.
Consequently, constant force spring motor sizing is lower than for
conventional return springs.
T
180
Torque in %
The main drawbacks of conventional solutions using simple return
springs are that the spring transmits the highest torque at the start
of the travel. Towards the end of the travel, the applied torque is
reduced when it is needed most to ensure safe valve seating. Hence,
the springs have to be oversized to ensure that the required torque
is still supplied towards the end of the travel.
140
110
100
OPEN (0°)
Further advantage: Thanks to the overriding gear arrangement, the
spring must not be operated during normal operation and remains
completely wound. This allows selection of smaller actuators.
Furthermore, premature spring fatigue can be prevented and the
valve is protected against excessive torques.
Return spring
AUMA constant force spring
CLOSED (90°) Time
Required valve torque
SERVICE CONDITIONS
AUMA actuators with FQM fail safe unit are designed to
highest reliability and long product life and fulfil their
automation tasks in most severe and harsh environments.
IP68 ENCLOSURE PROTECTION
Like the actuators, the FQM fail safe unit is available with
increased enclosure protection IP68 in compliance with IEC 60529.
The permissible immersion height of 8 m head of water is specifi ed
for a max. duration of 96 hours.
AMBIENT CONDITIONS
FQM fail safe unit in standard version is designed for temperatures
between –30 °C and +70 °C, the low temperature version for
temperatures between –40 °C and +60 °C. Further temperature
ranges are available on request.
CORROSION PROTECTION
The AUMA corrosion protection system with the two-layer powder
coating is certified by the TÜV and provides top-quality mechanical
and chemical resistance.
Actuators equipped with FQM fail safe units are suitable for
environmental conditions C5-I and C5-M in compliance with EN
ISO 12944-2. They comply with the requirements for use in areas
with high salinity, almost permanent condensation, and high
pollution.
EXPLOSION PROTECTION
Both actuators and FQM fail safe units were tested and certified in
close collaboration with national and international certification
bodies. Approvals have been obtained from authorities worldwide
for use in potentially explosive atmospheres, including ATEX
(Europe), IECEx (international), FM (USA) and ROSTECHNADSOR/
EAC (TR-CU) (Russia).
> Explosion protection according to ATEX
ATEX II2G Ex d,e IIC T4 or T3
> Explosion protection according to FM:
Class I, Div. 1, Groups B,C,D
Class II, Div. 1, Groups E,F,G
Class III
FIREPROOF VERSION
AUMA actuators with FQM fail safe units are available in fireproof
version to ensure safe closing and opening of valves even in the
event of a fire. Devices fi tted with K-MASS TM fire protection coating
preserve functionality during 30 minutes at temperatures as high as
1,100 °C. Consequently, they fulfil the requirements in compliance
with UL 1709.
SIL
Fail safe requirements and functional safety are often closely linked.
In particular, components with increased reliability and lower
probability of failure are required if system requirements include
safeguarding the safety for persons and environment in case of
emergencies.
AUMA fail safe unit complies with the highest demands regarding
functional safety according to IEC 61508 and is suitable for
safety-related systems up to SIL 2/SIL 3.
TECHNICAL DATA
Type
FQM 05.1
FQM 07.1
FQM 10.1
FQM 12.1
Mains voltage
Control voltage for
EMERGENCY input
Max.
Output
output
mounting fl ange torque
Swing
angle
EN ISO 5211
[Nm]
F05
150
F07
F07
300
F10
to 90°
F10
600
F12
F12
1200
F14
50 Hz: 220 V, 230 V, 240 V, 380 V, 400 V, 415 V
60 Hz: 440 V, 460 V, 480 V, 500 V
24 V DC/1 A
115 V AC
Operating
time
suitable
part-turn actuator
[s]
SQ
SA with GS
SQ 05.2
–
SQ 07.2
SA 07.2 + GS 50.3
SA 10.2 + GS 50.3
SQ 10.2
SA 07.2/SA 10.2 + GS 50.3
SQ 12.2
SA 07.2/SA 10.2 + GS 63.3
SA 10.2 + GS 80.3
5 – 30
10 – 60
7
AUMA Riester GmbH & Co. KG
Aumastr. 1
D-79379 Muellheim
Tel +49 7631-809-0
Fax +49 7631-809-1250
[email protected]
AUMA subsidiaries or representatives
are implanted in more than 70 countries. For
detailed contact information, please refer to
our website.
www.auma.com
Subject to changes without notice. The product features and technical data provided do not express or imply any warranty. Y006.906/003/en/1.15
Certificate Registration No.
12 100/104 4269