SEW Eurodrive Catalog - Arrow Conveyor Equipment, Inc.

Geared Motors \ Drive Electronics \ Drive Automation \ Services
1.2 Million Reasons for Partnering with SEW-Eurodrive:
The Complete Modular Program
for Greater Drive Engineering Efficiency
Program Overview
2
Contents
The know-how and quality of a global player
3
AC motors and brakemotors
6
Gear units and gearmotors
Parallel shaft gear units and gearmotors
Parallel helical gear units and gearmotors, incl. reduced backlash
Compact parallel helical gear units and gearmotors, incl. reduced backlash
Low-backlash planetary gear units and gearmotors
8
8
8
9
Right angle gear units and gearmotors
Helical-bevel gear units and gearmotors, incl. reduced backlash
Helical-worm gear units and gearmotors
TorqLOC®
SPIROPLAN® gearmotors
Helical-bevel servo gear units
10
10
10
11
11
High-torque industrial gear units
MC Compact Series (up to to 600,000 lb-in)
P Series (up to to 4,000,000 lb-in)
M Series (up to to 1,600,000 lb-in)
Q Series (up to to 10,500,000 lb-in)
CN Series (up to to 6,034,000 lb-in)
12
12
13
13
13
Gearmotors for overhead trolley systems
Light load
Heavy load
14
15
Variable-speed gearmotors
VARIGEAR® wide V-belt variable speed gearmotors
VARIMOT® friction-disc variable speed gearmotors
16
16
Electronically controlled drives
MOVIDRIVE® drive inverters
MOVITRAC® 07 frequency inverters
17
18
Servomotors
Synchronous servomotors
19
Decentralized Drive Systems
Fieldbus interfaces, field distributors and hybrid cables
MOVIMOT® – the smart gearmotor with integrated frequency inverter
MOVI-SWITCH® – the smart gearmotor with integrated switching & protection
20
21
21
From a service perspective
The support of a drive engineering partner
Interactive software tools that simplify design and commissioning
22
23
The know-how and quality of a global player
SEW-EURODRIVE – a reliable global partner
For more than eight decades SEW-Eurodrive has been recognized as a leader in the manufacture of
drive products for industry worldwide. The reason is simple: we offer unsurpassed engineering know-how
that has pioneered the world’s largest selection of modular systems, built with uncompromising quality. In
doing so, we lay the foundation for ever greater efficiencies in today’s automated production environment.
SEW-Eurodrive – a global drive engineering partner you can rely on.
Long-term quality planning
Our customers trust us because we combine our know-how with quality that continually sets new
global standards. At SEW-Eurodrive, our commitment to quality starts with the selection of raw
materials and continues throughout the production process. Rigorous quality inspections are
performed at every stage of manufacture. The result is a vast range of highly reliable mechanical
and electronic drive products that deliver extremely long service life.
Quality is also reflected in our outstanding product design. Drawing on diverse practical experience,
our engineers constantly strive towards developing more efficient, higher performance drive
technology. This fundamental approach is not only the basis for the innovative products we
offer today – but serves as a state-of-the-art platform for the drive solutions of tomorrow. The
SEW-Eurodrive modular program is the world’s most advanced standard for meeting the increasingly
demanding requirements of today’s drive applications.
3
4
The know-how and quality of a global player
Exceeding demanding standards – worldwide
As a global company, and a supplier to all sectors of industry across North America, at
SEW-Eurodrive we are continually improving our products and processes to meet the
world’s highest quality standards. Driven by competitive global markets, the North American
automotive industry continues to place unprecedented demands on its partner suppliers.
For the past several years, we have been one of a select few global manufacturers to meet
the new quality standard adopted by the automotive industry – ISO/TS 16949. With its
larger scope, ISO/TS 16949 exceeds existing standards such as VDA 6.1 or QS 9000.
SEW-Eurodrive therefore meets the highest currently certifiable quality standard which is
recognized worldwide. Users of drive technology from all industries will profit from our
products and systems being engineered to the demanding quality standards set by the
North American automotive industry.
North American assembly and service, backed by global manufacturing resources
With nine North American assembly plants supplied by nine global manufacturing centers, more
than 90 technical sales offices and hundreds of distributors and support specialists from coast
to coast – SEW-Eurodrive can provide local service and support to the same certified global
quality standard that goes into manufacturing our drives, no matter where you are located.
SEW sales engineers and service professionals offer consultation, analysis and project planning
support based on the experience gained from a vast number of applications worldwide. In
addition, our North American parts manufacturing and assembly capability enables us to supply
custom solutions, while ensuring quick delivery and reliable startup on site. With the latest
documentation and information available via the Internet, and nationwide 24-hour on-call service
seven days a week, we offer a level of customer support that is unequaled in the drive industry.
At SEW-Eurodrive, our people are among the most knowledgeable and accessible in the industry.
We welcome dialog with our customers, not only because of the opportunity it gives us to add
value to their applications, but for the invaluable feedback it provides on the performance of
our products. Worldwide, this ongoing information exchange empowers some 9,000 employees
to develop advanced technology and solutions that exceed our customers’ expectations.
We’re driving the world, with innovative drive products
and systems that deliver superior performance for
a vast range of applications in every industry –
from automotive production to building materials
manufacturing, from food & beverage handling to
metals processing. When you choose drive technology
“made by SEW-Eurodrive” you are getting a return
on your power transmission investment that is
second to none.
The know-how and quality of a global player
With modular drive components manufactured
centrally in production sites throughout Europe
and the US and final assembly and custom
modifications performed in regional assembly
plants across North America – SEW-Eurodrive
offers responsive, single-source delivery and
service capability in national and local markets.
5
6
AC motors and brakemotors
The perfect speed and torque for every drive
SEW-Eurodrive AC gearmotors are perfectly matched to deliver low speeds and high
torques. Each of our gearmotors is the combination of an AC motor and speed reduction
gear unit in an extremely compact design, achieved by incorporating the motor shaft as
part of the first gear stage.
They can be operated directly on the supply network at 60 Hz (50 Hz optional) –
single-speed or two-speed – as well as infinitely variable speed using SEW-Eurodrive
variable frequency inverters.
Meeting the challenge of every application
SEW-Eurodrive AC motors are engineered
with high power density to deliver plenty of
overload capacity and high reliability, and
are available in a wide range of designs
offering proven features, such as:
– Compact size meets minimum
space requirements
– Robustly engineered for versatile
performance
– Various configurations, supported
by a large variety of accessories
– Low-noise operation
In addition to our diverse range of AC
motors, we offer numerous mounting
options, including gear units with input
shafts and adapters for mounting NEMA or
IEC standard motors, as well as adjustable
motor mounting platforms for mounting
the motor above the gear unit.
AC motors and brakemotors
AC squirrel-cage brakemotors from SEW-Eurodrive feature integrated DC-energized safety disc
brakes. The brake control system is installed in the terminal box as standard, or can optionally
be supplied in a control cabinet design. The patented 2-coil brake system is engineered
for extremely short reaction and response times to provide high starting frequencies and
positioning accuracy.
Additional features:
– Low maintenance and long-term
reliability due to high brake service life
– “Fail-safe” braking
– Selectable braking torque
– Noise-suppressed brake
– Inverter duty
– MOVIMOT® drive motors up to 5 hp
with integrated frequency inverter
(see page 21)
– MOVI-SWITCH® drive motors up to 5 hp
with integrated switching function and
protection feature (see page 21)
Power range [hp]
– Stepless electronic speed control available
using MOVIDRIVE® (see page 17) or
MOVITRAC® (see page 18) inverters
– Optionally available functions include:
temperature monitoring, forced cooling,
additional flywheel mass, manual brake
release (locking and independently reengaging),
plug connectors (IS/AS../AM.., tachometer
and position encoder), brake rectifier for DIN
rail mounting, brake rectifier with special
features, e.g., heating function to prevent
moisture condensation
0.08 to 100
Synchronous speeds at 60 Hz [rpm]
– single-speed
900 / 1200 / 1800 / 3600
– two-speed
1800/3600 / 1200/3600 / 900/3600 / 900/1800
Frequency [Hz]
60 Hz (50 Hz optional)
Voltage [V] range
208 to 575
Multiple voltage at 60 Hz (50 Hz opt.)
200, 230 / 460, 575 for 2-, 4-, 6-, 8-pole motors
Enclosures
IP54, upon request IP55 / IP56 / IP65 / IP66
7
8
Gear units and gearmotors
Parallel shaft gear units and gearmotors
SEW-Eurodrive manufactures parallel shaft gear units and gearmotors with parallel helical, compact
parallel helical or planetary gear reduction, and a variety of mounting options. Engineered for high
efficiency and high endurance, our state-of-the-art helical gearing is available in a wide range of
torques, gear ratios and output speeds – in finely stepped increments – to meet the exact needs
of your application.
Parallel helical gear units and gearmotors
With six single-stage and fourteen two- and
three-stage gearing configurations covering
a torque range from 275 to 159,300 lb-in,
SEW helical gearmotors are available to
meet the most demanding performance and
space requirements.
– Single-stage RX-Series and two- and
three-stage R-Series with high permissible
overhung loads
– Foot, flange or combined foot-flange
mounting options
– Special RM design available with extended
bearing housing for agitator applications
RX-Series1) (single-stage)
Output speed range
90 to 2,700 rpm
Output torque
Up to 7,350 lb-in
Motor power range
0.08 to 112 hp
R-Series1) (two- and three-stage)
Output speed range
0.01 to 1,093 rpm
Output torque
Up to 159,300 lb-in (reduced backlash version also available)
Motor power range
0.08 to 434 hp
Compact parallel helical gear units and gearmotors
the
Snuggler® F-Series compact parallel shaft helical gearmotors are ideally suited for applications
where mounting space is restricted. Available in foot, flange and shaft mounted versions.
F-Series1) (two- and three-stage)
Output speed range
0.01 to 931 rpm
Output torque
Up to 159,300 lb-in (reduced backlash version also available)
Motor power range
0.08 to 337 hp
1) The values listed refer to a supply frequency of 60 Hz and reflect the combined outputs achieved using SEW-Eurodrive single-stage
or multi-stage gear units with 2-, 4-, 6- and 8-pole or two-speed AC motors.
Gear units and gearmotors
Gear units and gearmotors
The low backlash PSF/PSKF planetary servo gear units from SEW EURODRIVE in single-stage and
two-stage design are very compact and provide high torques and overhung loads. They are available
in eight sizes with high torsional rigidity in a torque range of 25 ... 3,000 Nm (221 ... 26,550 lb-in)
and can be accelerated with torques of up to 4,200 Nm (37,170 lb-in).
Low backlash PSF/PSKF planetary servo gear units with solid shaft
Size
MN
Nm / lb-in
Ratios
single-stage
two-stage
Circumferential
backlash[‘]
120
25 / 221
3, 4, 5, 7, 10
16, 20, 25, 28
8, 4, 2
220
55 / 487
35, 40, 49, 70
6, 3, 1
320
110 / 977
100
520
300 / 2,655
620
600 / 5,310
720
1,000 / 8,850
820
1,750 / 15,488
920
3,000 / 26,550
4, 5, 7, 10
4, 2, 1
The low backlash PSF/PSKF planetary
torques of up to 2,500 Nm (22,125 lb-in).
and prevent positioning deviations.
servo gear units with flange-block shaft
Transmission elements on the output side
The compact design of the flange-block
are characterized by an extremely high
are directly mounted to the rotating output
version reduces installation space and
torsional rigidity and torque range from
flange according to the EN ISO 9409
costs since there is no need for additional
55 ... 1,750 Nm (487 ... 15,488 lb-in)
standard. The positive connections
clamping rings and couplings.
and can be operated with acceleration
throughout guarantee high safety factors
Low backlash PSBF planetary servo gear units with flange-block shaft
Size
MN
Nm / lb-in
Ratios
single-stage
220
55 / 487
5, 7, 10
320
110 / 977
15, 20, 25, 28, 35
520
300 / 2,655
40, 49, 70
620
600 / 5,310
20, 25, 28, 35, 40
820
1,750 / 15,488
49, 70, 100
two-stage
20, 25, 28, 35, 40,
49, 70, 100
Circumferential
backlash[‘]
6, 3, 1
4, 2, 1
9
10
Gear units and gearmotors
Right angle gear units and gearmotors
A wide range of right angle gear units and gearmotors are available from SEW-Eurodrive, with helical-bevel, helical-worm and
Spiroplan® gearing, as well as two-stage helical-bevel gearing for servo applications. Offered in foot, flange or shaft mounted
configurations, SEW right angle gearmotors are particularly well suited for applications where mounting space is restricted.
Helical-bevel gear units and gearmotors
SEW-Eurodrive helical-bevel gearmotors
offer remarkably high efficiency for significant
energy savings in a variety of applications.
Their long life and maintenance-free
performance make them ideal for use with
AC asynchronous motors, as well as with
high endurance in both directions
of rotation
asynchronous and synchronous servomotors.
– K-Series three-stage helical-bevel
– Available in foot, flange and shaft
gearmotors provide high efficiency and
mounted versions
K-Series1) (three-stage)
Output speed range
0.01 to 882 rpm
Output torque
Up to 442,500 lb-in (reduced backlash version also available)
Motor power range
0.08 to 616 hp
Helical-worm gear units and gearmotors
Individually matched for torque and speed,
SEW-Eurodrive helical-worm drives have
proven themselves for decades, delivering
high operational efficiency across all sectors
of industry. With torques from 380 to
35,400 lb-in and high ratios at the worm
gear stage, these gearmotors offer a
powerful yet cost-effective drive solution.
– S-Series two-stage helical-worm
gearmotors offer large reduction ratios
from the worm gear stage and extremely
low-noise operation
S-Series1) (two-stage)
Output speed range
0.01 to 516 rpm
Output torque
Up to 35,400 lb-in
Motor power range
0.08 to 47 hp
1) The values listed refer to a supply frequency of 60 Hz and reflect the combined outputs achieved using SEW-Eurodrive single-stage
or multi-stage gear units with 2-, 4-, 6- and 8-pole or two-speed AC motors.
TorqLOC®
SEW-Eurodrive’s TorqLOC® patented keyless hollow shaft design
simplifies shaft mounting with the F-Series (theSNUGGLER®), K-Series
(helical-bevel) and S-Series (helical-worm) reducers, resulting in
time and cost savings for users and OEM’s.
Gear units and gearmotors
11
SPIROPLAN® gearmotors
Thanks to their unique steel-on-steel gearing and wear-free, low-noise engineering, SEW single-stage SPIROPLAN® right angle gearmotors
develop their power extremely reliably and quietly. The SPIROPLAN®’s compact and rugged, lightweight aluminum housing makes installation
easy in applications where space is limited. Can be mounted vertically or horizontally.
SPIROPLAN® Series1) (single-stage)
Output speed range
11 to 210 rpm
Output torque
Up to 620 lb-in
Motor power range
0.08 to 1.0 hp
1) The values listed refer to a supply frequency of 60 Hz and reflect the combination options of SEW-Eurodrive gear units
with 4-, 6- and 8-pole or two-speed AC motors.
Helical-bevel servo gear units
With the new BS right angle helical-bevel servo gear units, it’s now possible to use servo drives
in applications where space restrictions do not permit conventional in-line installation. These
two-stage servo units are equipped with high-endurance, wear-free helical-bevel gearing.
Both the bevel gear output stage and helical input stage are characterized by their low backlash
and low-noise operation. SEW-Eurodrive helical-bevel servo gear units are available with
circumferential backlash of <6 or <3 angular minutes, delivering output torques from 354 to
13,265 lb-in, and can be accelerated to torques of up to 19,897 lb-in.
BSF / BSBF / BSHF helical-bevel servo gear units
Size
MN
Nm / lb-in
Ratios
two-stage
Circumferential
backlash[‘]
202
40 / 354
3, 4, 6, 8, 10, 15, 20, 25
6, 3
302
80 / 707
3, 4, 6, 8, 10, 15, 20, 25, 30
402
160 / 1,415
502
320 / 2,830
3, 4, 6, 8, 10, 15, 20, 25, 30, 35
602
640 / 5,660
3, 4, 6, 8, 10, 15, 20, 25, 30, 35, 40
802
1500 / 13,265
Design versions:
BSF with B5 flange and solid shaft
BSBF with B5 flange and flange-block shaft
BSHF with B5 flange and hollow shaft with shrink disc
12
High-torque industrial gear units
Power for every application
SEW-Eurodrive offers five series of high-torque industrial gear units, each one exhibiting
impressive technical and performance characteristics. Whether assembled from standard
production or individual gear units engineered to particular customer specifications – SEW
industrial drives outperform in every application, from travelling cranes to heavy material
handling to shipbuilding, or in the energy, forestry, mining and process industries.
MC Compact Series (up to to 600,000 lb-in)
The MC Compact’s parallel shaft design provides for an
extremely low-maintenance drive that fits in very tight
spaces. The eight models in this series enable you to
fine tune exactly the right solution for your requirements,
and can be mounted in virtually any position in applications
such as heavy conveyor systems, large mixers and travel
drives for cranes.
Reduction ratios and torques
Helical, bevel-helical gear units:
2- and 3-stage
Reduction ratios of 7:1 to 112:1
Rated torque [lb-in]
Up to 600,000 lb-in
P Series (up to 4,000,000 lb-in)
SEW-Eurodrive P Series combination planetary gear units
are designed with the motor mounted integrally to the
input of the planetary gear unit – no traditional couplings
or adapter flanges are required. Both inline co-axial and
right angle configurations are available. And the P Series
is a standardized product, so you can order it directly from
our catalog, saving time and money. Ideal wherever large
loads must be moved at low speeds.
Reduction ratios and torques
Power Range
1 to 180 hp
Rated torque [lb-in]
Up to 4,000,000 lb-in
High-torque industrial gear units
M Series (up to 1,600,000 lb-in)
The M Series is often referred to as the “big brother” of the MC Compact. A compact drive
with three times the torque of the MC, the M Series delivers a whole lot of power, considering
the small space it requires. Available in up to nine sizes, depending on mounting position, the
M Series is easily adapted to industrial applications in the water treatment, pulp & paper and
mining/aggregate industries, to name just a few.
Reduction ratios and torques
Helical gear unit:
2-, 3- and 4-stage
Reduction ratios of 6.3:1 to 400:1
Helical, bevel-helical:
3-, 4- and 5-stage
Reduction ratios of 14:1 to 1,800:1
Gear unit design
Vertical mounting position rated torque [lb-in]
up to 1,600,000
Gear unit design
Horizontal mounting position rated torque [lb-in]
Up to 1,600,000
Q Series (up to 10,500,000 lb-in)
In the world’s largest applications where giant parabolic mirrors scan the sky, or huge
observatory and stadium roofs must be opened, enormous forces are necessary to move
the heavy loads involved. In these and equally demanding industrial applications, our
ultra-powerful Q Series planetary gear units get the job done. What’s more, their versatility
makes them easily customizable for special applications.
Reduction ratios and torques
Planetary gear unit:
Reduction ratios of 20:1 to 480:1
Rated torque [lb-in]
Up to 10,500,000
CN Series (up to 6,034,000 lb-in)
The CN Series helical and bevel-helical gear units are the perfect platform for customer-specific
applications and highly customized machines or systems where a standard gear unit might
not do the job. Various auxiliary modules are available which mount easily on the input and
output side of the unit to provide unmatched versatility for applications from mining to crane
construction to chemical processing.
Reduction ratios and torques
Helical gear unit:
1-, 2-, 3- and 4-stage
Reduction ratios of 1:1 to 710:1
Bevel-helical gear unit:
1-, 2-, 3-, 4- and 5-stage
Reduction ratios of 1:1 to 3,150:1
Rated torque [lb-in]
Up to 6,034,000 lb-in
13
14
Gearmotors for overhead trolley systems
Optimally matched to conveyor capacity,
conveyor speed and carrying load
SEW-Eurodrive gearmotors for overhead trolley systems are available in nine sizes. Matched
torques available in graduated increments deliver long-term performance along with the
flexibility to handle the most diverse tasks.
Absolute reliability and low-noise operation for light-load applications
SEW trolley drives for light-load applications
are very quiet, and comply with C1 (VDI RL3643) standards. Engineered with an extremely
reliable clutch, these drives deliver:
– Low maintenance; for example, the
HW30 is lubricated for life to provide
easy serviceability and high productivity
– Smooth running, vibration-free operation
– Very low noise for use in workstations
– Compact, space-saving design
Light load
Type
Maximum
torque
[lb-in]
Permitted
wheel
load [lbs]
Speed
* [fpm]
Ratios
Shaft
dxl
[mm]
620
SPIROPLAN®gear unit HW30
1,260
29 to 267
8.2:1 to 75:1
20 x 35 /
25 x 35
Helical-worm
1,150
gear unit HS40
1,460
11 to 299
7.28:1 to 201:1
20 x 35 /
25 x 35
* With wheel diameter 4.9 in. and input speed = 1,700 rpm
Gearmotors for overhead trolley systems
High capacities and absolute reliability
for heavy-load applications
Over the years, there has been a trend in heavy-duty trolley systems towards increasing
working loads. To meet this need, we have taken advantage of the greater efficiency
of helical-bevel gearing to expand the SEW-Eurodrive large trolley drive product line,
in addition to our traditional helical-worm gearing.
All sizes
– Suitable for maximum loading (wheel
loads up to 8,100 lbs)
– Gear ratios for precise speed matching
– Available with integrated MOVIMOT®
inverter or MOVI-SWITCH® integrated
switching and overload protection
Heavy load
Type
Maximum
torque
[lb-in]
Permitted
wheel
load [lbs]
Speed
* [fpm]
Ratios
Shaft
dxl
[mm]
HS41
1,635
2,250
17 to 483
7.28:1 to 201:1
25 x 35
HS50
5,310
4,160
17 to 483
7.28:1 to 201:1
30 x 60 /
35 x 70
HS60
5,310
5,620
16 to 465
7.56:1 to 217.41:1
45 x 90
Type
[in]
Maximum
torque
[lb-in]
Permitted
wheel
load [lbs]
Speed
* [fpm]
Ratios
Shaft
dxl
[mm]
HK30
1,770
2,250
33 to 656
5.36:1 to 106.38:1
25 x 35
HK40
3,540
4,160
27 to 605
5.81:1 to 131.87:1
30 x 60 /
35 x 70
HK50
5,310
5,620
24 to 266
13.25:1 to 145.14:1
45 x 90
HK60
7,250
8,100
24 to 266
13.22:1 to 144.79:1
55 x 110
* With wheel diameter 7.9 in. and input speed = 1,700 rpm
15
16
Variable-speed gearmotors
Mechanical stepless speed variation for robust performance
SEW-Eurodrive’s VARIGEAR® and VARIMOT® mechanically-adjustable gearmotors can incorporate any type of SEW modular
gear reduction to deliver low output speeds and high torque for a wide range of variable-speed applications. Low-speed
combinations are possible using helical, parallel shaft helical, helical-bevel and helical-worm gearing. Available in foot- or
flange-mount design, our mechanically variable-speed gear units can also be used without additional reduction for direct
machine drive.
Speed adjustment is typically mechanical using a handwheel, or electromechanical using a servomotor. However, utilizing
pole-changing motors it is possible to expand the speed range of SEW-Eurodrive variable-speed gearmotors even further.
VARIGEAR® wide V-belt variable-speed gearmotors
Available in VU and VZ mounting configurations,
VARIGEAR® V-belt variable-speed gearmotors
deliver up to 60 hp, with ratios of 1:4, 1:6
or 1:8. In addition to the numerous SEW
gearing combinations possible, their optional
U- or Z-flow configuration allows for simple
fine tuning to accommodate various
machine designs.
VARIGEAR®
Maximum
motor power
Possible
configuration
Max. speed range for
ventilation design
ventilated
closed
VU/VZ 01
1 hp
U or Z
1:5
1:5
VU/VZ 11
2 hp
U or Z
1:7
1:6
VU/VZ 21
5 hp
U or Z
1:8
1:6
VU/VZ 31
7.5 hp
U or Z
1:8
1:6
VU/VZ 41
15 hp
U or Z
1:6
1:6
VU 51
30 hp
U
1:6
–
VU 6
60 hp
U
1:4
–
VARIMOT ® friction-disc variable-speed gearmotors
VARIMOT® D-Series friction-disc variablespeed gearmotors deliver up to 15 hp, with
ratios of 1:4 or 1:5. The contact pressure
between the drive and friction discs,
required for torque transmission,
is automatically self-adjusting.
VARIMOT®
Maximum
motor power
Maximum
speed range
D 16
1 hp
1:5
D 26
3 hp
1:5
D 36
7.5 hp
1:5
D 46
15 hp
1:4
Electronically controlled drives
Intelligent drive inverters for automated motor control
MOVIDRIVE® universal motor controllers deliver advanced functionality and versatility for precise
control of asynchronous and permanent magnet synchronous motors, in both conventional and highly
dynamic servo applications. In fact, using an encoder, MOVIDRIVE®’s intelligent control can even be
used to enable asynchronous drives to achieve servo characteristics. Modular and expandable, these
powerful drive inverters offer a versatile, cost-effective control solution for a broad range of drive
applications – from simple to the highly complex.
Available with two control modes, VFC (Voltage Flux Control) and CFC (Current Flux Control),
MOVIDRIVE® provides programmable control for both sensorless vector and closed-loop applications.
CFC: MOVIDRIVE®’s CFC mode with
closed-loop feedback provides for
highly dynamic speed control for both
asynchronous AC motors (5000:1
speed range) and AC servomotors
(>3000:1 speed range). Torque rise
times are extremely short.
VFC: With or without encoder feedback,
MOVIDRIVE®’s VFC mode provides high
dynamics and high speed stability for
standard asynchronous applications.
Standard or application version –
the right solution to meet any requirements
MOVIDRIVE® features the intelligent IPOS plus positioning to sequence control system as a standard
®
feature. For all applications, IPOS plus makes no compromises when it comes to precision because
®
it uses the exact and highly-dynamic control properties of the drive inverter. The user can set the
programming to either Windows® programming or high-level language. Thanks to the direct access
to all the internal inverter parameters, IPOS plus is fast and flexible. The result is a diverse movement
®
controller that can be tailored to meet the individual requirements of the system. The variety of
options available in MOVIDRIVE® means that the system can be extended at any time in accordance
with the modular concept.
It is also possible to use the pre-programmed control programs, the application modules.
These application modules or the technology functions "electronic cam disc" and "internal
synchronous operation" enable MOVIDRIVE® to take over the function of a position controller,
flying saw or other application solutions. At the same time, it offers quick parameter settings
rather than time-consuming programming. Simply enter the mechanical data and load the
program in the drive inverter, and it is ready for operation!
230V equipment
460V equipment
Connection voltage [VAC]
3 x 200 to 240 ± 10 %
@ 50/60 Hz ± 5%
3 x 380 to 500 ± 10 %
@ 50/60 Hz ± 5%
Power range [hp]
2 to 50
2 to 175
Fieldbus interface
PROFIBUS, INTERBUS, CAN, CANopen, DeviceNet
17
18
Electronically controlled drives
MOVITRAC® 07 frequency inverters:
Simple and economical
When a quick, simple electronic control solution is needed, MOVITRAC® 07 is more than
up to the task. This compact variable frequency drive combines many of the features and
functions of its larger relatives, to deliver economical AC motor control for less complex
applications such as pumps, fans, agitators, turntables and conveyors, to name just a few.
MOVITRAC® 07’s integrated control unit
makes startup and operation easy. Simply
enter the drive data using the operator keypad
and speed control potentiometer, and your
application is ready to run. PC-based
programming via SEW’s MOVITOOLS® software
provides additional operating convenience
and diagnostic status monitoring.
In addition to its user-friendly installation,
MOVITRAC® 07 offers highly reliable
connection technology. EMC-compliant
wiring of all motor and control cables is
supported by integrated shield clamping
options.
MOVITRAC® 07
230V equipment
Connection voltage [VAC]
1 x 200 to 240 ± 10% @ 50/60 Hz ± 5%
3 x 200 to 240 ± 10% @ 50/60 Hz ± 5%
Speed range [rpm]
Up to 5,500 max.
Power range [hp]
- single-phase
- three-phase
0.5 to 3
0.5 to 40
MOVITRAC® 07
460V equipment
Connection voltage [VAC]
3 x 380 to 500 ± 10% @ 50/60 Hz ± 5%
Speed range [rpm]
Up to 5,500 max.
Power range [hp]
0.75 to 40
Servomotors
Synchronous servomotors
SEW-Eurodrive synchronous servomotors
deliver excellent dynamic performance and
can be very precisely controlled. Their
permanent, rare-earth magnets provide low
mass inertia, enabling these motors to
quickly deliver high torque in response to
speed change commands. A resolver-based
feedback system is standard. However,
increased flexibility can be achieved with an
optionally mounted high-resolution (sin/cos)
absolute encoder.
Highly precise, continuously variable speed
control is available using our MOVIDRIVE® or
drive inverters. SEW DS and CM synchronous
servomotors can be overloaded up to 400%.
An optional fully integrated “fail-safe” disc
brake provides reliable holding and emergency
braking, even with the voltage switched off.
DS/CM synchronous servomotors
Mass inertia [10-4 Kgm2]
[10-3 lbft2]
Static torque at rated speed
2000 rpm
3000 rpm
4500 rpm
6000 rpm
Motor
Brakemotor
5 ... 68 Nm
1 ... 68 Nm
1 ... 68 Nm
1 ... 21 Nm
0.48 ... 189
0.83 ... 209
44 to 600 lb-in
9 to 600 lb-in
9 to 600 lb-in
9 to 186 lb-in
1.14 to 448
1.97 to 496
19
20
Decentralized drive systems
Decentralized drive control using standard fieldbus communications
A simpler, more compact drive solution that
delivers significant cost benefits
A leader in drive decentralization for the better part of a decade, SEW-Eurodrive has engineered unique decentralized
control technology that takes advantage of the proven reliability of standard fieldbus communications, to replace conventional
centralized switchgear, controls and cabling for dramatic savings in materials and installation costs.
Daisy chaining the power and bus communication, the patent-pending SEW-Eurodrive design enables the controller to be
placed on or near the geared motor, not only providing a substantial reduction in branch circuit cabling, but offering related
benefits that include faster system startup, simpler maintenance and easier future expansion.
Group motor installation architecture
SEW-Eurodrive’s decentralized control architecture takes a modular approach, allowing groups of motors to be wired
as an individual motor normally would be. Fully UL and cUL listed, the SEW system meets US National Electric Code
(NEC) requirements for group motor installation. Local I/O connections are via standard M12 sealed micro-connectors
for convenient, low-cost sensor/actuator integration.
Fieldbus interfaces. SEW-Eurodrive
decentralized control systems are designed
to interface with a variety of standard
fieldbus networks. The bus network allows
for the exchange of important data, including
control, speed, ramp, drive status, fault
indication and output current, as well as I/O
status and control.
Field distributors. The heart of the
decentralized system, SEW’s innovative field
distributor technology integrates the disconnect
switch, VFD, motor brake control and bus
communications into one unit, acting as a
junction box to route power and communications
to the individual drives.
Hybrid cables. Specially designed hybrid
cables combine power transmission, control
voltage and communications within a single
pre-fabricated shielded cable ensuring
optimal EMC shielding. Their fast, easy
connection lets you pre-install, stage and
test the system off-site, reducing the plant
downtime required for installation and setup.
Decentralized drive systems
MOVIMOT ® – the smart gearmotor with integrated
frequency inverter
SEW-Eurodrive’s MOVIMOT® smart gearmotor offers cost-effective sensorless vector control, with
or without 4-quadrant braking, for decentralized or centralized variable-speed applications from
0.5 to 5 hp. Easily retrofitted in the field, this space-saving VFD mounts directly on standard SEW
motors and is available for all gearing types and mounting options.
In addition, the MOVIMOT® design allows for the connection of an external, fail-safe emergency
stop relay, ensuring protection against restart according to safety Category 3 of EN 954-1.
Connection voltage [VAC]
3 x 380 to 500 ± 10% @ 50/60Hz
3 x 200 to 240 ± 10% @ 50/60Hz
Motor frequency range [Hz]
2 to 100
Control supply voltage
24 VDC external, local supply available as option
Enclosure
IP54, optional IP55, IP65
Ambient temperature
-25°C to +40°C
Control via binary signals
Inputs for CW/stop, CCW/stop, setpoint switch mode
isolated signal relay
2 fixed setpoints
1 ramp for acceleration / deceleration
Control via fieldbus communication
In combination with fieldbus interfaces with or without mini-controller
INTERBUS
Diagnostics
3-color LED indicates operating status and fault status
via RS-485 serial interface
via fieldbus
optional MDG11A remote speed control or PC
MOVI-SWITCH® – the smart gearmotor with integrated
switching & protection
For simpler decentralized applications requiring safe constant-speed bi-directional operation
up to 5 hp, SEW-Eurodrive offers the cost-effective MOVI-SWITCH®. This compact and robust
gearmotor provides built-in switching and protection, eliminating the cabling and space normally
required in the switching cabinet for these functions.
21
22
From a service perspective
The support of a drive engineering partner
As a drive engineering partner to customers worldwide, SEW-Eurodrive offers a level of applications engineering expertise,
technical support and service that is unsurpassed in the drive industry. This service capability is the result of the close
working relationships with those who count on us – 24 hours a day, 365 days a year.
In over 40 countries around the world, our sales engineers, onsite technical consultants and project planning specialists
are actively committed to solving the individual challenges of SEW customer’s. In fact, helping to design thousands of
applications for our customers has enabled us to develop one of the industry’s broadest knowledge bases.
This extensive knowledge has produced an array of support tools and programs designed to help you achieve exactly
the right drive solution for your application.
Via the Internet
Online you will find ready answers to some
very specialized questions. In addition to
corporate information, product descriptions
and detailed specifications, we offer product
catalogs, technical documentation, operating
instructions, parts lists, technical articles
and software, all available for download or
convenient ordering – 24/7, from anywhere
in the world.
US: seweurodrive.com
Canada: sew-eurodrive.ca
International: sew-eurodrive.com
Classroom and
hands-on training
Access our knowledge
base directly
To complement the latest product and
applications information, available directly
from your SEW representative, we provide
a comprehensive program of regional training
seminars. They are designed to meet
diverse customer needs with specific
instruction in everything from drive program
planning, to state-of-the-art electronic
drive maintenance, to decentralized control
systems, and much more.
We also make a broad range of information
available on a variety of technical subjects
through our “Practical Drive Engineering”
series of brochures, as well as a wide
selection of CD-ROM based documentation
and presentations.
Spare parts and local service, right around the corner
Even the most robustly engineered drives
require preventive maintenance to ensure
long-term, trouble-free operation. Equally
important is the periodic replacement
of parts as they wear, and should drive
components become damaged, they must
also be replaced. Whatever the need,
contact SEW for parts and unit replacement.
From initial startup to onsite training,
our service team is dedicated to helping
you achieve fast payback on your power
transmission investment. With a network
of regional service locations nationwide,
backed by vast global resources,
SEW-Eurodrive can send a factory trained
service specialist to your job site.
And of course, our global modular components
program ensures you get exactly the spare
parts you require, no matter where in the
world you’re located. Wherever you are, we
are – just give us a call.
From a service perspective
Interactive software tools that simplify
design and commissioning
In addition to our PC-based MOVITOOLS®
and MCDTOOLS software for easy setup,
control and fault diagnostics of our electronic
drive inverters, SEW-Eurodrive offers powerful,
interactive drive engineering software –
available online – to make designing your
application simpler and faster than ever before.
Our PT Pilot® online drive selection program
lets you search SEW’s modular components
database – quickly and easily. This cuttingedge design tool gives you access to a
catalog search engine, a drive system
calculator, complete technical documentation,
drive formulas and coefficients, and a
glossary of terms – no software installation
or purchase necessary.
For creating detailed, scalable drawings of
SEW-Eurodrive’s more than 1.2 million drive
configurations, to be used immediately in
your system design, we offer DriveCAD. This
online CAD software saves you hours of
drafting time. Choose from 2D DXF or DWG
format, or 3D SAT, STEP or IGES format.
Customizing your drawings to specification
for motor, output shaft and mounting flange
is now as simple as clicking a mouse.
23
Geared Motors \ Drive Electronics \ Drive Automation \ Services
How we’re driving the world
With a global presence that
offers responsive and reliable
solutions. Anywhere.
With uncompromising
quality that reduces the
cost and complexity of
daily operations.
With drives and controls
that automatically
improve your productivity.
With comprehensive
knowledge in virtually
every branch of
industry today.
With industry-leading
training and 24-hour
technical support, nationwide.
SEW-EURODRIVE
Driving the world
With a worldwide
service network that is
always close at hand.
With innovative technology
that solves tomorrow’s
problems today.
With online information and
software updates, via the Internet,
available around the clock.
Around the world
SEW-EURODRIVE – Wherever you are, we are
Midwest Region
Assembly Center
SEW-Eurodrive, Inc.
Troy, OH
Tel. (937) 335-0036
Fax (937) 440-3799
[email protected]
Northeast Region
Assembly Center
SEW-Eurodrive, Inc.
Bridgeport, NJ
Tel. (856) 467-2277
Fax (856) 845-3179
[email protected]
Southeast Region
Assembly Center
SEW-Eurodrive, Inc.
Lyman, SC
Tel. (864) 439-7537
Fax (864) 439-7830
[email protected]
Southwest Region
Assembly Center
SEW-Eurodrive, Inc.
Dallas, TX
Tel. (214) 330-4824
Fax (214) 330-4724
[email protected]
Mexico
SEW-Eurodrive Sales and
Distribution SA de CV
Queretaro, Mexico
Tel. (011) 52-442-103-0300
Fax (011) 52-442-103-0301
[email protected]
SEW-Eurodrive Co.
of Canada Ltd.
Bramalea, Ontario
Tel. (905) 791-1553
Fax (905) 791-2999
[email protected]
SEW-Eurodrive Co.
of Canada Ltd.
Delta, B.C.
Tel. (604) 946-5535
Fax (604) 946-2513
[email protected]
SEW-Eurodrive Co.
of Canada Ltd.
LaSalle, Quebec
Tel. (514) 367-1124
Fax (514) 367-3677
[email protected]
MOVIMOT®, theSNUGGLER®, SPIROPLAN®, MOVILINK®, MOVITRAC®, IPOSPLUS® and PT Pilot® are registered trademarks of SEW-Eurodrive.
PROFIBUS® is a registered trademark of PROFIBUS International. DeviceNet™ is a trademark of Open DeviceNet Vendor Association.
Windows® is a registered trademark of Microsoft Corporation. National Electrical Code® is a registered trademark of the National Fire Protection Association.
Western Region
Assembly Center
SEW-Eurodrive, Inc.
Hayward, CA
Tel. (510) 487-3560
Fax (510) 487-6381
[email protected]
www.seweurodrive.com (U.S.)
www.sew-eurodrive.ca (Canada)
1050 0014 / 0105US
North America: