Nordic Plow for Dixie Chopper Zee 2

Comments

Transcription

Nordic Plow for Dixie Chopper Zee 2
Nordic
Dixie Chopper Zee 2 (2354)
................................................................................... 3
DANSK.....................................................................18
ENGLISH....................................................................11
NORSK.....................................................................19
FRANCAIS.................................................................12
SVENSKA.................................................................20
ITALINO.................................................................... 13
POLSKI.....................................................................21
NEDERLANDS.......................................................... 14
CESTINA...................................................................22
ESPANOL.................................................................. 15
MAGYAR...................................................................23
PORTUGUES.............................................................16
XXXXXX....................................................................24
XXXXXX.................................................................... 17
XXXXXXX..................................................................25
For Customer Service Call: 888-662-PLOW (7569)
1
2
A
4
B
5
F
G
D
“B”
“T”
3
(X 1)
(X 1)
(X 3)
(X 2)
(X 2)
6
(X 8)
10
9
7
(X 1)
(X 2)
8
(X 1)
14
(X 1)
18
17
(X 1)
19
20
(X 1)
(X 1)
24
23
(X 1)
(X 1)
25
26
29
J
(X 1)
27
28
30
31
32
33
(X 8)
(X 6)
(X 5)
(X 2)
(X 2)
(X 2)
(X 3)
(X 12)
45
35
36
(X 30)
(X 6)
(X 8)
38
K
(X 1)
40
42
39
41
(X 2)
(X 2)
43
(X 4)
(X 12)
(X 22)
37
27
(X 1)
(X 1)
L
34
N
44
(X 1)
(X 4)
(X 2)
2
1
2
2
2
A
A X4
37
36
26
2
1
1
37
3
25
36
4
32
25
6
25
6
3
5
25
3
36
37
6
3
37
36
25
7
4
5
T
B
37
36
26
X4
4
8
28
27
27
39
28
9
14
5
10
39
39
39
6
11
23
12
24
29
36
37
7
13
35
10
35
44
14
29
36
34
18
36
36
45
29
43
20
43
19
45
43
8
15
45
16
9
9
9
38
39
30
17
17
7
37
29
36
10
18
31
40
41
8
44
7” (178mm)
2” (51mm)
11
19
43
29
12
33
33
13
ENGLISH
open space between our bracket
and the frame of the Z-Turn.
Safety:
Read and understand the plow
instruction manual before use.
Scan the QRC instructional
videos on the first page or watch
the videos on our website before
use. (www.nordicplow.com)
Always instruct other
before they use the plow.
users
Operation:
Risk of Injury
Never allow children to
handle the plow.
Never allow anyone to walk
beside or sit on the plow
when in use.
Never operate the plow
over 2 to 3 mph. Keep a
slow steady speed.
If you hit an obstruction,
immediately
stop
the
vehicle
and
reverse
direction.
Keep the strap secured near
steering column to keep it
clear of front axles.
Instruction Clarification:
STEP 10-11: There are several
types of Z-Turns–two are shown
here. Part#42 may be required
depending the size of the frame.
Use Part #28 to attach to frame –
the longer bolt (Part#27) is
optional if needed. This bracket
assembly MUST be securely
tightened to the frame before
use.
STEP 12: Part #11 is a center
support that some models of ZTurns require. It supports the
STEP 13: Part #23 can be
placed on either side of the hitch
as preferred by operator.
STEPS 18: The axle hole used
should be 7inch (178mm) from
the ground. Use Part #9 if
necessary – be sure to bolt as
shown to allow for pivot action.
STEP 19 & 20: Before you
attach Part#7 to the blade, make
sure the top pivot plate (Part#4)
is on top. Do not over tighten
the lock nuts (Part#41) – there
should be some wiggle room to
allow for easy placement of the
T-Handle (Part#33) into the
multi-position holes.
STEP 21: Loosely assemble
parts until the desired height of
the foot pedal is achieved. Then
tighten, but allow for some
movement to the pivot points.
FAQ’s
How long will the plow last?
The lightweight design and
rounded
edge
technology
significantly reduces friction and
wear of the blade. The bottom
edge will show signs of pits and
scratches but will not degrade
the blade. In addition, each
blade is reversible for added
longevity.
Where is the cutting edge?
The Nordic Plow works
extremely well without a cutting
edge.
The Plows angle
combined with its weight and
that of the machine and operator
provide significant force tight to
the ground. This force allows for
a clean sweep of snow, slush,
mulch, dirt, etc. The plow may
not pick up hard, packed down
snow or ice.
Can I use it on uneven
surfaces or grass?
Yes – our rounded edge blade
can be used on paver bricks,
sidewalks, grass, gravel and
most uneven surfaces without
causing damage to the blade or
surface being plowed.
Will the plow leave marks on
the pavement?
The Nordic Plow will not leave
marks on your driveway, unlike
traditional steel plows that can
leave rust and scratches on the
pavement.
Trouble Shooting & Tips
Blade is not flush to ground:
In the angled position, the blade
will not be flush to the ground if
the top pivot and bottom pivot
plates are reversed.
The blade flips forward when
plowing:
Adjust the boots and axle so that
the axle is 7” (178mm) from the
ground.
T-Handle Hard to Insert:
The top and bottom pivot bolt
must be loosened to allow for
some movement in the metal
plates.
The blade is heavy to lift with
foot pedal during operation:
After you have pushed the snow
or material, reverse the machine
briefly to clear the blade of the
material before lifting the blade
with the foot pedal.
.
Nordic Plow Zero Turn Instructions
Copyright 9/24/13
14