The Campbell - Campbell

Campbell
The
Lockstitch Sewing Machine
Made in the USA since 1882
Designed in the 1880’s, this machine revolutionized the industry and
established the standard for other leather machines to follow. It was
the first needle and awl machine successfully produced, and now
over 120 years later, the Campbell is still known as the best heavy
leather stitcher built. This reputation has been grown through years
of outstanding quality and dependable service.
The Campbell is the workhorse of the largest manufactures and the
smallest custom shops. The machine is known for its tight, uniform
stitch on both the top and bottom of the material. It has been the
choice of the world’s finest saddle, harness, and holster makers for
over 100 years.
As a machine that was designed for leather, the Campbell succeeds
where other machines fail. Through thick and thin, over layers and
up inclines, the Campbell continues to maintain a uniform stitch due
to the simple, square-feed awl design.
SPECIFICATIONS
Max Speed
Clearance
Under Foot
300 SPM*
1-¼ in”**
Max Sewing
Capacity
Work Space
3/4”
9” Throat
Stitch
Length
5 to 12 SPI
Thread
Capacity
3 to 7 cord
138 to 415
*Speed depends on material
** Greater clearance can be achieved depending on choice of presser foot
Reasons to own a
Campbell
Quality: Superior Stitch Quality: A tighter and more appealing
stitch than any closed eye needle machine ever made. The needle and awl
design allows for more thread through a smaller hole, resulting in a tighter
stitch. No unsightly “pucker” marks on the bottom side of the material, unlike
closed eye needle machines.
100% Made in the USA!
Strength:
The Strongest of Leather Stitchers: The Campbell has more driving power and is capable
of sewing through hard leathers, heavy plastics, wood, wool, and other difficult materials.
The Campbell High Lift Machine will consistently sew up to 1-1/8”! This is the strongest
heavy duty machine manufactured today.
Dependability:
• Over 120 years of experience.
• Parts Always in Stock: We manufacture our own replacement parts using the best technology available.
• Free Technical Support for Life: Our staff is always available to help you through any technical problem.
• A Machine for Life: Our machines last generations, some for over 70 years and still stitching.
Versatility:
• Adaptable to most any leather work
• Works with a variety of threads: linen, cotton, polyester, nylon, or monocord...
Sew with thread lubricant or wax for stronger stitches.
• Custom Attachments for sewing raised work, close edge sewing, beaded work,
rounds, channeled work, and more from over 120 years of sewing.
• Capable of Corner Stitching right angles with seams shown on edges;
Used for decades by manufacturers of instrument cases and luggage.
6
Sewing Machines
1-800-327-9420
Factory Rebuilt
Campbell Lockstitch Machines:
Campbell machines are rebuilt from existing core machines with special care
to detail. It is completely disassembled by our expert mechanics, stripped,
polished, and painted. Every part is inspected and if it does not match
original tolerances, it is replaced with a new peice. The machine is then
reassembled, and undergoes a through inspection of its performance under
various speeds and sewing applications. Before shipment, the Campbell is
adjusted to the customer’s preferences. We stand behind our product and
will accommodate our customers through training and technical support.
CUSTOM Campbell STANDS
TB-CHS: Custom built to meet the demands of extra heavy-duty
Includes…
• Factory Rebuilt Machine
• Stainless Steel Wax Pot, Direct Feed Thread Rack,
Tool Tray
• Bobbin Winder Assembly
• Basic Tool Kit
• 3 Spare Bobbins
• One Stock Presser Foot & Non-Adjustable
Throat Plate (On SR-7 Cover)
• 1 Pack of Awls & 1 Pack of Needles
• 2 Spools of Polyester Thread of your choice
• Machine Manual with Parts List
machines. The ruggedly designed, tubular steel frame won’t flex or
shake like common stands. Complete with ½ HP clutch motor, Formica covered plywood top, pedals, and table levelers. We can build
the table to your specifications.
SPEED REDUCER SYSTEM
Our tables are equipped with an interchangeable system of pulleys for that
perfect speed of 125, 220, and 300
stitches per minute.
What is a Needle and Awl Machine?
The Campbell is a needle and
awl machine designed for leather.
The awl is set in the head of the
machine and the needle mechanism in the base. The awl punches
a hole through the leather as it
descends, then the awl feeds the
leather forward. A barbed needle
raises and pulls the thread through
for the lock, as the awl again
descends for another stitch. This
process assures uniform feeding
and stitching, without the flex and needle breakage inherent in needle
feed machines. This produces the best quality stitch for leather goods;
however it is not recommended for nylon webbing.
The
Campbell
HIGH LIFT
Locksitch Sewing Machine
Engineered for the toughest applications
The High Lift is a modified version of the Campbell Lockstitch, designed to
accomadate extra heay duty sewing applications that require tight seams or
hard materials. It has all the same features of the standard Campbell, but
inludes an extra 3/8” lift, increased stroke, and special parts for even more
clearence.
This specialized machine has been especially useful for applications like
heavy-duty harness, bare-back riggings, stitching saddle cantales, and
more. The High Lift is made to order so please call for more information.
SPECIFICATIONS
Max Speed
Clearance
Under Foot
300 SPM* 1-5/8” in”**
Max Sewing
Capacity
Work Space
1-1/8”
9” Throat
Stitch
Length
5 to 12 SPI
Thread
Capacity
3 to 7 cord
138 to 415
*Speed depends on material & application
www.campbell-bosworth.com
Sewing Machines
7
Upgrade your machine with a
Campbell DIRECT FEED THREAD RACK
Campbell
SA-CHS-DF
• Prevents thread knotting by pulling
from the side rather than the top of
the spool
• Helpful when working with difficult
threads
• Provides additional tension adjustment to fine tune your work
• Designed to be interchangeable
between natural and synthetic
thread spools
ADJUSTABLE WORK GAUGE
CHS-254
Mounts in the bed of Campbell &
Randall Lock-Stitch Machines. Used
to guide work from the right edge.
CHANNEL ATTACHMENTS
Campbell
Channel your work as you sew!
STAINLESS STEEL WAX POT
Ideal for Round Reins, Harness, Saddles, and Boots.
The built in knives cut a stitch groove
through your work as you sew.
Protects the stitch for extra long life!
The SR-206A Plate cuts the bottom
groove and can be used with the
optional work guide. The SR-205
Channel Foot cuts the top groove.
CHS-268-SS
• Fine stainless steel construction.
• Won’t rust or corrode.
• Used with most waxes or lubricants.
• Complete with stripper nuts.
SR-205
Channel Presser Foot
SR-206A
Channel Throat Plate
HOW TO SEW ROUND REINS
Campbell BOBBIN WINDER ASSEMBLY
Improves Stitch Appearance with
Consistent Bobbin Feeding and Tension
• Variable Speed Control
• Adjustable Winding Tension
• Compact Design
• Portable to Work Anywhere
• Winds Bobbins in Under a Minute
Before
A time time and money saver!
After
For Consistent Bobbins Every Time
SA-CHS-BWA:
Complete Assembly
SA-CHS-BWB:
Assembly Without
BobBin Winder & Wax Pot
Campbell FLAT BED TABLE ATTACHMENT
The Throat Plate Attachment
(SR-206A) used for straight
sewing leather that will be
molded into rounds. Attach
to the Arch Cover (SR-89).
The throat plate knife is used
for cutting channel on bottom of leather. The Presser
Foot with Knife (SR-205) is
used for cutting channel in
top of leather. Increasing or
decreasing pressure on the
Presser Foot Spring (SR-579)
enables the operator to cut
a channel of greater or less
depth. The rounds leather
must be fitted for the machine
carefully, in that it must be cut
and folded uniformly. If fitted
unevenly, the leather will cause the guides on the Work Gauge (SR-254) and Throat Plate (SR-206A)
to interfere with the machine feed while sewing the leather for your rounds.
BEADED LINES ATTACHMENTS
NOTE: When ordering this attachment, send
sample of beaded line to be fitted to plate and foot
Beaded Line Cross Section
with Rounded Bottom
CHS-TBEXT
• Ideal for Campbell &
Randall machines
• Supports large, flat pieces
such as saddle skirts, for
easier sewing
• Easy C-clamp attachment
for quick installation and
removal.
• 24” wide x 30” long.
Beaded Line Cross Section with Flat Bottom
(Use Beaded Line Presser Foot With Flat Throat Plate)
SR-221A: Throat Plate and Presser Foot for
Beaded Lines. (Complete - Used with S-89 Arch Cover)
Campbell
STITCH MEASURE
• Count the stitches per inch on your work.
• 1/2” between points
8
Sewing Machines
1-800-327-9420
LISTED BELOW ARE COMMON ATTACHMENTS USED ON THE CAMPBELL LOCK STITCH SEWING MACHINE.
We have a variety of attachments that have been developed during the past 120 years to meet the applications of leather sewing. Prices and availability subject to change.
COMMON THROAT PLATES
COMMON THROAT PLATES
Non-Adjustable Throat Plates (Used with S-7 Arch Cover)
Adjustable Throat Plates (Used with S-89 Arch Cover)
SR-110A: For Heavy Work SR-365A: For Bag Work
SR-110: For
Heavy Work
SR-113: For “Raised
SR-111: Inclined to throw the SR-112: For “Raised Work”, Extra Thick. Used
$29.50
SR-638A: For Heavy Work
$77.00
$40.00
bottom stitch further from edge. Work” Top and Bottom
for close to edge stitching.
$21.00
$29.50
$36.50
$30.50
$35.00
SR-642A:For Medium Work
SR-461:
For Bag or Counter
Sewing, ½” High
$45.00
SR-638:
For Heavy Work
SR-642: For Aloft
Work, Beveled
$45.00
$18.95
SR-952:
$50.00
SR-947: Holder for
Non-Adjustable Plates
SR-952A: Throat Plate For
Light Work
$30.00
$36.00
For Light Work
$24.00
COMMON STOCK PRESSURE FEET
Common New Style used with the SR-637 holder $36.00
CUSTOM ATTACHMENTS
MADE TO ORDER
Corner Stitch Attachments
Ideal for Boxs, Cases, Luggage, Holster Toes, Cups...
SR-1063A:
Angle Plate for Box Work
SR-629NS: For Belting And
Flat Stitching
$40.00
SR-910NS: Open Toes
$40.00
SR-630NS: For Plain Stitching SR-636NS: Extra Heavy
& Saddle Work
$40.00
SR-911NS: Right Toe
Foot. For Materials thicker
than 5/8”.
$40.00
R-441NS: Left Toe
$40.00
$40.00
SPECIAL ORDER PRESSURE FEET
Used with the SR-637 holder
Traditionally used
in fine harness. The
spurs follow the
stitching resulting in a
clean, finished look.
The Campbell has always been the leader in this
specialized trade. All kinds of leather boxes, cases, and luggage has been sewn on the Campbell,
such as camera cases for Kodak, and instument
cases for Motorola.
Attachments may vary between aplication.
Call for more information.
SR-370: Presser Foot for
French Edge Work
SR-633: Setup Foot
in pitches 5 to 16.
SR-631: Guard Foot
for Shoe Work
Call for Quote
www.campbell-bosworth.com
Sewing Machines
9