View Myerson Brochure

The difference
is clear to see…
Approximal stains
Strong surface relief
Enamel striaton
Darker neck of tooth
Aesthetically
and functionally designed,
handcrafted teeth
from Myerson
Myerson Special Characterisation
Composite filling
Decalcification
Translucent incisal areas
Darker canine teeth
For the highest standards
in Denture Aesthetics...
Myerson New Special teeth; made from a specially
formulated acrylic interpenetrating polymer network;
have been designed to meet the needs of both the
dentist and technician. They also meet the patient’s
demand for the highest aesthetics.
MYERSON SPECIAL AESTHETIC ADVANTAGES:
Myerson New Special are available in an extensive
selection of moulds and 16 V shades – A1 to D4.
The moulds have been individually characterised by
hand to simulate the appearance of well cared for
natural dentition.
n Excellent for partial dentures: natural labial
carvings, irregular incisal edges and long lingual
form
n Natural fluorescence: consistent shade values
under any light conditions
n Natural translucency and surface lustre:
harmonise well with adjacent natural teeth
The ‘True to Life’ look for all ages
As the demand continues to grow
among older patients for a more
natural look in full or partial dentures,
more and more dental practitioners
are turning to the use of
characterised teeth in their full and
partial denture cases.
Such characterising features are to
be found in Myerson Special teeth
and serve to help the dentist and
technician to achieve a more natural
Characterising features and irregularities are
‘True to Life’ denture.
individually added by hand
Many of these irregularities have
been individually added by hand
and the characterisation varies
across the shades i.e. heavier in the
darker shades and gentler in the
lighter shades. The location of
fillings and decalcified areas are
added in a non-symmetrical
manner.
Colours and special effects come
from within the tooth rather than on
the surface, which means that the
Summary of Myerson Special Characterisation:
n Greater depth of translucent layer and bluish incisal edges
n Simulated composite fillings
Mould Chart
n Decalcification areas
n Irregular incisal edges
n Neck & labial stains in varying degrees of colours
Moulds range from flat to curved with either long or
short ridgelaps. Labial carvings range from smooth
to rugged, enabling dental practitioners to suit the
personal characteristics of their most discerning
patients.
n Built in lines or striations
Physical and clinical features of Myerson Special teeth
n High Density: Absence of porosity, cleaner, easier
to grind.
n Superior durability: The Special crosslinking
formula binds the molecules of resin so closely
together that they are resistant to staining and
wear.
n No discolouration: Myerson Special teeth will not
discolour during or after processing.
n Superbonding: No popouts - perfect bond makes
onepiece denture.
n Resilience: preserves tissue, less brittle - no
breakage - no inprocessing repairs.
Myerson Limited
4 Crystal Way, Harrow, Middlesex HA1 2HG UK
Facsimile: +44 (0)20 8861 3091
Telephone: +44 (0)20 8863 9044
web: www.myersontooth.com
e-mail: [email protected]
0473
Myerson is a registered trademark of Myerson LLC
ANTERIOR TEETH
A2
A4
POSTERIOR TEETH
40.3
9.5
A52
45.8
10.4
PM2
41.8
9.0
7.3
8.3
7.8
(11)
(13)
(11)
41.4
9.6
A53
47.0
11.4
PM4
43.8
10.0
7.6
8.6
8.1
(7)
(16)
(12)
3
29.2
9.0
17
36.8
12.3
5.6
4.4
7
32.0
9.1
A63
34.7
27.7
8.10
A9
43.5
9.9
A64
47.0
9.7
PM6
45.8
11.0
7.9
8.6
8.4
(7)
(A71)
(13)
44.5
10.5
A72
49.0
10.4
PM8
47.2
12.0
8.0
9.1
8.7
(8)
(A73)
(14)
8
33.1
9.8
34.3
10.1
7.52
5.4
A71
30
9.0
5.2
A73
36.5
9.0
5.2
8.00
8.54
31.6
32
48.0
11.1
YM3
8.8
(14)
A13
A43
50.3
12.9
YM5
9.4
PW2
46.4
9.8
7.9
8.5
(11)
(13)
43.5
10.4
PW4
47.8
10.8
9.3
8.2
8.8
(16)
(8)
(A73)
43.2
9.2
YW3
7.9
(12)
A44
41.5
45.0
9.9
YW5
45.5
10.2
PW6
48.5
11.8
8.6
9.1
(13)
(16)
46.8
11.2
PW8
50.0
12.8
8.3
8.9
9.2
(13)
(14)
(16)
MOULD VARIETY
Myerson Special teeth are available in 24 upper and 13 lower anterior moulds in a
wide variety of types and forms that make it possible to customise dentures to conform
to the personal characteristics and facial features of most patients.
UPPER ANTERIOR MOULDS
Myerson Special teeth are categorised in three types of upper anterior moulds:
‘A’, ‘Y’ and ‘P’:
1. Twelve (12) ‘A’ or Aesthetic Moulds
• Slender forms with excellent balance between the ridge lap and bite
• Subtle labial carving and lifelike blending
• Available in six tapering and six square shapes.
2. Four (4) ‘Y’ or Youthful Moulds
• These are similar to A moulds in aesthetic concept except that they have a shorter
ridge lap
• Beautiful sculpturing with a vigorous youthful look
• Longer more youthful lingual line
• Fewer striations and age related effects than ‘P’ moulds
• Available in two medium (YM) and two wide moulds (YW).
3. Eight (8) ‘P’ or Prime moulds
• Designed for older patients
• Shorter, less sloping ridge laps to help butting the ridge in partial and immediate
dentures
• Excellent carvings with more pronounced age characteristics, ruggedness and
curvature
• Available in four medium: (PM) and four wide moulds: (PW).
LOWER ANTERIOR MOULDS
Thirteen (13) moulds are available, for perfect articulation with ‘A’, ‘Y’, or ‘P’ upper
anterior moulds. See Combination Chart.
POSTERIOR MOULDS
Myerson offer a choice of posterior teeth to enable the clinician and technician to meet
the needs of the patient in terms of aesthetics, function and quality of life using the
‘least complicated method’
Duratomic1 – cusp angle:30 degrees
Indication: Full & Partial dentures
• Shallow cusp occlusal surfaces for natural form, good contacts and easy lateral
movement
• Fast and easy to set up in balanced occlusion with little or no adjustment after
processing
• Simulated abrasion on lower cusps: blends well with natural dentition
• Long lingual surfaces: improves comfort and phonetics for patient
• Durablend material - Interpenetrating polymer network for exceptional wear
resistance
GanyMed2 – cusp angle: 30 degrees
Indication: Full & Partial dentures
• As for Duratomic with the addition of a Durablend material reinforced with submicron silica further enhancing their hardness and wear resistance.
MLI3 – Myerson lingualised Integration
Indication: Implant supported prostheses and full denture cases with a questionable
jaw relation position.
• Specially designed for the lingualised occlusion scheme
• High wear resistance: Interpenetrating polymer network reinforced with submicron silica
• Natural facial cusps and uncomplicated mandibular central fossa combines
function and aesthetics.
• Fast set up with minimal occlusal reshaping to achieve balanced occlusion.
1 Special Duratomic combine with Myerson Special anterior teeth. Standard Duratomic combine with Characetrized and Standard
teeth.
2 GanyMed combine with Myerson Special anterior teeth
3 MLI combine with Myerson Special anterior teeth
11
31.0
8.45
C O M B I N AT I O N C H A R T
8.5
4.4
ANTERIORS
12
32.9
MOULD
8.5
4.6
13
34.7
9.8
5.1
14
34.9
10.8
5.1
16
36.7
11.1
5.6
KEY
Mould type
Aesthetic
Youthful
Prime
33.0
5.5
9.25
A11
30.6
35.0
5.0
10
29.1
8.0
4.6
29.6
A7
28
A2
A4
A7
A9
A11
A13
A43
A44
A52
A53
A64
A72
YM3
YM5
YW3
YW5
PM2
PM4
PM6
PM8
PW2
PW4
PW6
PW8
A/6
mm
40.3
41.4
43.5
44.5
48.0
50.3
43.2
45.0
45.8
47.0
47.0
49.0
41.5
43.5
45.5
46.8
41.8
43.8
45.8
47.2
46.4
47.8
48.5
50.0
MOULD
ARTICULATED
WITH LOWER
MOULD
11
7
7
8
14
16
12
13
13
16
A71
A73
11
8
13
14
11
12
13
14
13
A73
16
16
A/6
mm
31.0
32.0
32.0
33.1
34.9
36.7
32.9
34.7
34.7
36.7
35.0
36.5
31.0
33.1
34.7
34.9
31.0
32.9
34.7
34.9
34.7
36.5
36.7
36.7
COMBINES WITH
POSTERIOR
MOULD
UPPER
LOWER
MOULD
P/4
P/4
mm
mm
28
27.7
29.1
28
27.7
29.1
30
29.6
30.6
32
31.6
33.0
35.0
34
33.4
34
33.4
35.0
30.6
30
29.6
32
31.6
33.0
32
31.6
33.0
34
33.4
35.0
32
31.6
33.0
35.0
34
33.4
30
29.6
30.6
32
31.6
33.0
32
31.6
33.0
32
31.6
33.0
30.6
30
29.6
30.6
30
29.6
32
31.6
33.0
34
33.4
35.0
32
31.6
33.0
34
33.4
35.0
34
33.4
35.0
34
33.4
35.0
n Special anteriors combine with Special, mli or Ganymed posteriors
n characterised and Standard anteriors combine with Standard Duratomic posteriors
SHADE
CHART
Vita Lumin Shade
Myerson Special
Competing Product
33.4
34
35.0
8.85
9.77
MC
31.2
32.3
9.3
8.50
CC
30.9
32.3
9.1
8.50
27.7
8.1
28
Mould #
Width of 4 maxillary posterior teeth
facio-lingual
#26
29.1
7.52
KEY
facio-lingual
#36
Width of 4 mandibular posterior teeth
A1
A2
A3 A3.5 A4
B1
B2
B3
B4
C1
C2
C3
C4
D2
D3
D4
0.78 1.85 1.29 0.96 0.90 0.83 1.18 0.85 1.30 1.03 1.17 1.14 1.00 0.73 0.66 0.88
2.61 0.75 1.81 1.57 1.93 3.00 1.49 2.02 2.49 1.72 0.94 0.91 1.75 1.75 1.09 1.57