Formwork Component Catalogue

Transcription

Formwork Component Catalogue
Formwork
Component Catalogue
L
N x 60
37,5 52,5
51
48,5
120
140
N x 125
52
52
162
172
Edition 11/2009
PERI GmbH
Formwork Scaffolding Engineering
P.O. Box 1264
89259 Weissenhorn
Germany
Tel +49 (0)7309.950 - 0
Fax +49 (0)7309.951- 0
[email protected]
www.peri.com
Important Notes:
Without exception, all current safety regulations
must be observed in those countries where our
products are used.
The illustrations in this brochure are photographs of
real site situations. Safety or formwork anchor
details are therefore not to be taken as a definitive
guide to the way the equipment is to be used.
Safety precautions and allowable loads are to be
strictly observed at all times. Separate structural
calculations are required for any deviations from the
standard design data.
The information contained herein is subject to technical changes in the interests of progress.
Content
1
5
Formwork Girders
GT 24 Formwork Girder
VT 20 Formwork Girder
9
38
75
93
111
126
155
165
171
179
201
211
225
237
Wall Formwork
MAXIMO Panel Formwork
TRIO Panel Formwork
TRIO Housing Panel Formwork
DOMINO Panel Formwork
HANDSET Panel Formwork
VARIO GT 24 Girder Wall Formwork
RUNDFLEX Circular Formwork
GRV Circular Formwork
FTF Facade Formwork
SB Brace Frame
RS and RSS Push-Pull Props
Tie System DW 15, 20, 26, B 15, 20
Tie System DK, SK, KK
ASP Box-Out Form
243
253
263
275
281
291
Column Formwork
RAPID Column Formwork
QUATTRO Column Formwork
TRIO Column Formwork
LICO Column Formwork
VARIO GT 24 Column Formwork
SRS Column Formwork
299
311
319
329
341
Slab Formwork
SKYDECK Panel Slab Formwork
GRIDFLEX Grid Element Slab Formwork
MULTIFLEX Girder Slab Formwork
PERI Table Modules VT, SRU
Beam Formwork UZ, AW, UZR
347
359
365
373
385
Shoring Systems
MULTIPROP System
PEP 10, 20, 30 Slab Props
ST 100 Stacking Tower
PERI UP Rosett Shoring
HD 200 Heavy Duty Prop
397
413
421
Climbing Systems
FB 180 Folding Platform System
ASG 70-100 Platform System
CB Climbing System, BR Shaft Platform
445
458
479
Scaffolding, Stairs, Working Platforms
PERI UP Stairs
PERI UP Rosett Modular Scaffolding
PERI UP Independent Accessories
493
505
Bridge- and Tunnel Formwork
Civil Construction Set VARIOKIT (Basic Comp.)
GKB Cantilevered Parapet Platform
519
525
535
545
556
571
Plywood, System-Independent Accessories
Plywood
Construction Site Equipment
Accessories for Logistics
Machines and Tools
Bolts, Nails, Pins
Accessories
578
589
593
597
Service
TRIO Cleaning, Repair (Custom Formwork)
DOMINO Cleaning, Repair (Custom Formwork)
SKYDECK Cleaning, Repair (Custom Formwork)
Technical Planning
600
622
646
PERI
Alphabetical Index
Numerical Index
PERI International
Formwork Girders
Column Formwork
Wall Formwork
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Slab Formwork
0.90 m
1.20 m
1.50 m
1.80 m
2.10 m
2.40 m
2.70 m
3.00 m
3.30 m
3.60 m
3.90 m
4.20 m
4.50 m
4.80 m
5.10 m
5.40 m
5.70 m
6.00 m
Shoring Systems
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
Climbing Systems
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Scaffolding, Stairs,
Working Platforms
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
Bridge- and
Tunnel Formwork
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
GT
Plywood, SystemIndependent Accessories
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
Girder
1
Service
075100
075120
075150
075180
075210
075240
075270
075300
075330
075360
075390
075420
075450
075480
075510
075540
075570
075600
Item no. Weight kg
075100
075120
075150
075180
075210
075240
075270
075300
075330
075360
075390
075420
075450
075480
075510
075540
075570
075600
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
5,300
7,100
8,900
10,600
12,400
14,200
15,900
17,700
19,500
21,200
23,000
24,800
26,600
28,300
30,100
31,900
33,600
35,400
Girders GT 24 Nominal Lengths
Girder GT 24 l = 0.90 m
Universal formwork girder made of wood.
L
918
1214
1510
1806
2102
2398
2694
2990
3286
3582
3878
4174
4470
4766
5062
5358
5654
5950
Note
Construction Approvel No .Z-9.1-157.
The common lengths of the GT 24 are colourcoded to allow easy handling.
Technical Data
perm. Q = 14.0 kN
perm. Q = 13.0 kN
perm. M = 7.0 kNm
ly = 8000 cm4
Q = perm. shear force Compression Strut
Q = perm. shear force Tension Strut
D
Shoring Systems
Z
D
Z
Climbing Systems
L
Working Platforms
311
296
60
Service
28
80
2
240
120
Bridge- and
Tunnel Formwork
60
163
296
Service
3
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
4
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Bridge- and
Tunnel Formwork
20 l = 1.45 m
20 l = 2.15 m
20 l = 2.45 m
20 l = 2.65 m
20 l = 2.90 m
20 l = 3.30 m
20 l = 3.60 m
20 l = 3.90 m
20 l = 4.50 m
20 l = 4.90 m
20 l = 5.90 m
20K l = 1.45 m
20K l = 2.15 m
20K l = 2.45 m
20K l = 2.65 m
20K l = 2.90 m
20K l = 3,90 m
20K l = 3.30 m
20K l = 3.60 m
20K l = 4.50 m
20K l = 4.90 m
20K l = 5.90 m
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
5
Service
073710
073720
073730
073740
073750
073760
073770
073780
073790
073800
073810
074990
074905
074910
074890
074920
074950
074930
074940
074960
074970
074980
Item no. Weight kg
074990
074905
074910
074890
074920
074930
074940
074950
074960
074970
074980
Column Formwork
Wall Formwork
Formwork Girders
8,560
12,700
14,460
15,640
17,110
19,470
21,240
23,010
26,550
28,910
34,810
Girders VT 20K with Steel Cap
Girder VT 20K l = 1.45 m
Formwork girder made of wood. Webs are rounded for reducing damage.
L
1450
2150
2450
2650
2900
3300
3600
3900
4500
4900
5900
Note
Technical Data
perm. Q = 11.0 kN
perm. M = 5.0 kNm
ly = 4290 cm4
Slab Formwork
L
140
Working Platforms
Bridge- and
Tunnel Formwork
073710
073720
073730
073740
073750
073760
073770
073780
073790
073800
073810
6
8,560
12,700
14,460
15,640
17,110
19,470
21,240
23,010
26,550
28,910
34,810
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
Girder VT
20
20
20
20
20
20
20
20
20
20
20
20
without Steel Cap
l = 1.45 m
l = 2.15 m
l = 2.45 m
l = 2.65 m
l = 2.90 m
l = 3.30 m
l = 3.60 m
l = 3.90 m
l = 4.50 m
l = 4.90 m
l = 5.90 m
200
40
40
120
Climbing Systems
27
100
Shoring Systems
Ø22
80
Service
140
100
100
Service
7
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
8
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
36
22
22
22
18
18
18
13
13
27
27
26
25
34
34
31
31
35
35
32
36
30
29
34
34
34
35
29
34
31
28
23
19
23
19
23
19
23
19
14
14
14
14
33
Climbing Systems
Nut Sealing Sleeve MX Ø 16
Outside Corner MXA 120 x 35
Plug MXM Ø 21
PVC Plug MX Ø 17,5 - 22
Scaffold Bracket TRG 120
Sealing Cone MX 55
Sealing Sleeve MX Ø 16
Sleeve SB-MAXIMO, galv.
Spanner for Sealing Sleeve MX Ø 16
Stacking Device MAXIMO, galv.
Stacking Device MX
Stopper MX 50 MF
Stopper MX 50 OF
Stopper MX 84 MF
Stud Spanner MAXIMO
Tension and Compression Brace MX
Tie Rod Spanner MX
TRIO Stripping Bar
Waler 85
Wall Thickness Comp. MX 120 x 10, Alu
Wall Thickness Comp. MX 120 x 4
Wingnut MX
Working Platforms
112338
112761
112830
112888
112667
112806
112887
114486
114478
112778
112837
112822
112889
116353
114300
023680
023670
112937
112342
114107
113183
115058
113019
114496
114503
114509
114619
115350
114290
112588
023551
114142
114128
114212
114165
114191
114186
114181
114174
114394
114842
114826
114846
112386
Bridge- and
Tunnel Formwork
27
33
33
33
23
19
14
23
19
14
32
29
29
28
31
35
32
32
20
20
21
21
20
20
15
15
16
16
16
15
27
10
10
10
12
11
11
11
23
24
24
24
24
25
26
26
25
28
28
22
21
17
17
13
12
26
26
25
25
30
30
35
28
27
21
17
12
Alignment Coupler BFD, galv.
Anchors MX 15-25
Anchors MX 20-30
Anchors MX 30-40
Articulated Corner MXGA 120
Articulated Corner MXGI 120
Bolts SB-MAXIMO, galv.
Brace Connector TRIO, galv.
Bulkhead Tie MX DW20
Bulkhead Tie TS, galv.
Concreting Platform TRIO 120 x 270
Cone MX DR 22
Connector SB-1,2 - MX/TR/D
Connector SB-A, B, C - MX/TR/D
Element MX 120 x 120
Element MX 120 x 30
Element MX 120 x 45
Element MX 120 x 60
Element MX 120 x 90
Element MX 270 x 30
Element MX 270 x 45
Element MX 270 x 60
Element MX 270 x 90
Element MX 30 x 240
Element MX 330 x 30
Element MX 330 x 45
Element MX 330 x 60
Element MX 330 x 90
Element MX 90 x 240
Element MX 90 x 30
Element MX 90 x 45
Element MX 90 x 60
Element MX 90 x 90
Elements MX 60 x 240
Elements MX 60 x 30
Elements MX 60 x 45
Elements MX 60 x 60
Hook Tie DW 15 l = 400 mm, galv.
Hook Tie Head DW 15, galv.
Inside Corner MXI 120 x 50/20
Inside Corner MXI 120 x 60
Lifting Gear-3 TRIO
Lifting Hook MAXIMO 1.5 t
Magnet Cone Spanner MX
MAXIMO Waler MAR 170-2
Multi Panel MXM 120 x 60
9
Service
023500
113847
112387
112464
111850
111872
114607
113246
113203
114583
113255
023660
115640
023640
022950
113018
027680
025740
112143
112104
112239
112232
112221
112152
112022
112006
112090
112078
112200
112045
112133
114248
114426
116454
114457
114452
114445
114258
112115
112271
112265
112259
112252
112126
112292
112286
112280
023650
023820
115299
112689
115255
112419
115338
114470
115315
112726
115307
112715
044770
115168
114797
114036
114034
112850
112849
114464
Item no. Weight kg
116454 444,000
Panel with 18 mm plywood.
450
1200
Column Formwork
3300
1200
Wall Formwork
450
Formwork Girders
600
1500
120
600
114426
408,000
450
Climbing Systems
1200
3300
1200
Shoring Systems
450
Slab Formwork
2700
540
1320
540
114248
226,000
450
1200
3300
1200
Bridge- and
Tunnel Formwork
450
Working Platforms
2400
600
600
Service
1200
10
120
120
Element MX 330 x 45
Working Platforms
300 300
225 225
Bridge- and
Tunnel Formwork
Climbing Systems
1200
1200
Shoring Systems
3300
450
Element MX 330 x 60
Slab Formwork
450
450
1200
Column Formwork
450
3300
Wall Formwork
1200
450
Formwork Girders
Element MX 330 x 90
450
11
Service
450
99,800
1200
114452
118,000
3300
114445
1200
Item no. Weight kg
114258 172,000
450
900
120
600
120
450
120
Item no. Weight kg
114457
79,600
Element MX 330 x 30
450
1200
Column Formwork
3300
1200
Wall Formwork
450
Formwork Girders
150
150
120
133,000
For oblique angles, wall connections etc.
Complete with
33 pc. 116353 Plug MXM Ø 21
33 pc. 113998 Sealing MXM Ø 16
450
114464
1200
100
120
450
206,000
10 x 40 = 400
For 90° internal corners.
450
114470
480
450
12
600
120
1200
3300
1200
Service
600
100
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
3300
1200
Shoring Systems
Slab Formwork
300
Formwork Girders
Complete with
12 pc. 116353 Plug MXM Ø 21
For 90° external corners.
114486
154,000
Column Formwork
120
Slab Formwork
175,000
13
Service
120
350
3300
Bridge- and
Tunnel Formwork
Working Platforms
120
450
Climbing Systems
3300
Shoring Systems
114478
200
500
450
1200
3300
1200
Wall Formwork
450
Item no. Weight kg
115338 135,000
Item no. Weight kg
114583
86,600
Made of aluminium, for oblique angles from 75°
upwards, internal.
300
120
300
114607
51,100
upwards, external.
114842
114826
114846
114394
17,800
18,900
20,200
12,100
Wall Thickness Compensations MX 330
For adjusting to wall thicknesses.
B
40
50
60
100
3300
B 60
14
120
100 62
120
Service
150
120
150
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
3300
Shoring Systems
Slab Formwork
Column Formwork
3300
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
2700
600
1500
600
Item no. Weight kg
112006 336,000
540
1320
540
120
186,000
Shoring Systems
Climbing Systems
2700
600
1500
600
112022
Slab Formwork
2400
600
600
120
2700
Bridge- and
Tunnel Formwork
600
Element MX 270 x 90
1500
450
450
120
900
15
Service
135,000
600
112045
Working Platforms
1200
Item no. Weight kg
112200 104,000
Element MX 270 x 60
2700
600
Column Formwork
1500
Wall Formwork
600
Formwork Girders
300
300
120
77,600
Element MX 270 x 45
1500
600
Climbing Systems
2700
600
112078
Shoring Systems
Slab Formwork
600
225 225
120
112090
62,800
Element MX 270 x 30
150
150
300
Service
2700
600
1500
Bridge- and
Tunnel Formwork
600
Working Platforms
450
16
120
Formwork Girders
Wall Formwork
Complete with
22 pc. 116353 Plug MXM Ø 21
Column Formwork
2700
1500
600
10 x 40 = 400
100
115255
102,000
Slab Formwork
Shoring Systems
156,000
Climbing Systems
600
Working Platforms
600
480
120
2700
1500
600
112419
120
600
100
2700
1500
600
Bridge- and
Tunnel Formwork
Complete with
8 pc. 116353 Plug MXM Ø 21
120
200
600
500
17
Service
600
Item no. Weight kg
112849 101,000
Item no. Weight kg
112887 294,000
Complete with
24 pc. 116353 Plug MXM Ø 21
120
900
2700
600
112806
145,000
112667
127,000
Service
450
120
120
350
2700
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
2700
Shoring Systems
Slab Formwork
Column Formwork
1500
600
Wall Formwork
Formwork Girders
18
Formwork Girders
upwards, internal.
300
41,800
upwards, external.
150
Bridge- and
Tunnel Formwork
B
40
50
60
100
100 62
19
Service
B 60
120
Wall Thickness Compensations MX 270
120
14,700
15,700
16,800
10,000
2700
114165
114186
114174
114128
Working Platforms
120
150
Climbing Systems
2700
Shoring Systems
111872
Slab Formwork
120
300
Column Formwork
2700
Wall Formwork
Item no. Weight kg
113203
69,400
Item no. Weight kg
112104 166,000
600
1200
Wall Formwork
600
Formwork Girders
540
1320
540
Column Formwork
2400
90,700
600
1200
600
Slab Formwork
112143
Shoring Systems
600
600
120
1200
67,700
Element MX 120 x 90
450
Service
450
120
900
51,200
Element MX 120 x 60
600
112221
600
1200
Bridge- and
Tunnel Formwork
Working Platforms
600
1200
600
Climbing Systems
112152
300
300
600
20
120
120
Formwork Girders
Element MX 120 x 45
600
1200
Wall Formwork
600
Item no. Weight kg
112232
37,100
225 225
120
Column Formwork
450
Slab Formwork
Element MX 120 x 30
1200
600
150
120
Shoring Systems
150
300
100
Bridge- and
Tunnel Formwork
600
1200
120
600
80,500
10 x 40 = 400
120
600
1200
600
100
600
112689
Climbing Systems
Complete with
11 pc. 116353 Plug MXM Ø 21
Working Platforms
480
50,400
600
112850
21
Service
27,400
600
112239
Item no. Weight kg
115299
48,500
Complete with
4 pc. 116353 Plug MXM Ø 21
600
Wall Formwork
Column Formwork
600
120
1200
500
200
Formwork Girders
153,000
112830
70,300
112761
61,200
Complete with
12 pc. 116353 Plug MXM Ø 21
Service
120
350
120
1200
Bridge- and
Tunnel Formwork
Working Platforms
1200
450
Climbing Systems
Shoring Systems
600
120
1200
900
600
Slab Formwork
112888
22
Formwork Girders
300
Column Formwork
120
300
Wall Formwork
upwards, internal.
1200
Item no. Weight kg
113246
31,200
upwards, external.
150
Shoring Systems
120
150
Slab Formwork
19,000
1200
111850
B
100
120
450
Element MX 90 x 240
900
121,000
450
112115
Working Platforms
Climbing Systems
B
40
50
60
100
Bridge- and
Tunnel Formwork
4
5
6
10, Alu
540
1320
540
120
2400
23
Service
Wall Thickness Comp. MX 120
Wall Thickness Comp. MX 120 x
120
6,430
6,990
7,480
4,510
1200
114212
114191
114181
114142
Item no. Weight kg
112252
48,900
Element MX 90 x 90
450
Wall Formwork
900
450
Formwork Girders
450
450
120
Column Formwork
900
36,600
Element MX 90 x 60
450
900
450
Slab Formwork
112259
300
300
120
Shoring Systems
600
31,200
Element MX 90 x 45
450
900
450
Climbing Systems
112265
Service
120
450
22,000
Element MX 90 x 30
900
450
112271
450
Bridge- and
Tunnel Formwork
Working Platforms
225 225
150
150
300
24
120
Formwork Girders
Complete with
4 pc. 116353 Plug MXM Ø 21
Column Formwork
600
480
900
450
36,600
450
115307
Wall Formwork
120
450
Item no. Weight kg
112715
68,100
Climbing Systems
450
120
900
900
Shoring Systems
88,100
Complete with
12 pc. 116353 Plug MXM Ø 21
540
1320
540
600
300
300
Working Platforms
112126
450
133,000
Slab Formwork
120
450
112889
200
900
500
120
300
300
600
Elements MX 60 x 60
300
120
600
25
Service
28,400
300
112280
Bridge- and
Tunnel Formwork
2400
Item no. Weight kg
112286
21,900
Elements MX 60 x 45
300
Wall Formwork
225 225
120
450
16,200
Elements MX 60 x 30
600
300
112292
300
Column Formwork
600
300
Formwork Girders
150
150
120
112726
45,400
26
200
120
900
120
300
Complete with
12 pc. 116353 Plug MXM Ø 21
600
300
Service
83,700
500
600
300
Working Platforms
Bridge- and
Tunnel Formwork
112822
120
Complete with
4 pc. 116353 Plug MXM Ø 21
300
600
300
300
29,400
Climbing Systems
115315
600
600
Shoring Systems
Slab Formwork
300
Formwork Girders
112133
52,900
Element MX 30 x 240
350
34,900
1320
540
120
2400
4,350
For all panel connections for MAXIMO, TRIO and
RUNDFLEX. Fillers up to 10 cm.
Technical Data
Permissible tension force 20.0 kN.
61
288
Bridge- and
Tunnel Formwork
Technical Data
Permissible bending moment 3.9 kNm.
126
30
For longitudinal compensation, height extensions,
stopend formwork and special applications with
MAXIMO. With captive connecting components.
850
30
13,800
259
115
114034
Working Platforms
164
max 220
Climbing Systems
023500
264
27
Service
540
150
300
Shoring Systems
150
Slab Formwork
120
600
112778
Column Formwork
120
Wall Formwork
450
600
Item no. Weight kg
112837
40,200
Item no. Weight kg
114036
23,000
MAXIMO. With captive connecting components.
Technical Data
30
126
1700
Column Formwork
264
8,520
Waler 85
Corresponds to Compensation Waler TAR 85 but
without mounting hooks.
Technical Data
105
30
023820
0,375
For connecting accessories to MAXIMO and TRIO
elements. DW 15 thread.
Technical Data
Bridge- and
Tunnel Formwork
68
30
Ø15
023650
0,769
Working Platforms
Climbing Systems
82
Technical Data
20
58
400
DW 15
023640
1,140
For force application from the stopend formwork
in MAXIMO and TRIO elements. DW 15 thread.
Technical Data
DW 15
Service
80
30
850
440
28
140
Shoring Systems
Slab Formwork
023551
58
115
30
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
For forming wall offsets with MAXIMO in connection with the Multi Panel MXM.
208
Item no. Weight kg
115640
6,000
255
44
Column Formwork
130
Slab Formwork
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.
For use with foundation formwork up to 1.20 m
high and as replacement for the top anchor of the
MAXIMO 330.
Complete with
1 pc. 115331 Bolt Ø 12 x 65, verz.
Note
Adjustable in 0.5 cm increments from 15 to 30 cm
and in 1 cm increments from 30 to 40 cm.
Technical Data
Permissible tension and compressive force 9 kN.
Working Platforms
6,430
174
115350
Shoring Systems
222
Ø13,2
Climbing Systems
For connecting push-pull props and kicker braces
to MAXIMO and TRIO elements. Mounted on vertical and horizontal struts.
185
3,310
169
023660
Stacking Device MX
For easy stacking of MAXIMO panels.
50
90
29
Service
0,068
110
113019
Bridge- and
Tunnel Formwork
65
61
750
Item no. Weight kg
115058
7,490
For stacking and transportation of 2-5 MAXIMO
or TRIO panels of all sizes. Suitable for crane and
fork-lift transport. 4 pieces per stack.
Safety Instructions
Follow Instructions for Use at all times!
Bearing capacity 500 kg per post, 2 t per stack.
For transporting MAXIMO and TRIO elements.
Safety Instructions
Use 2 pieces per transportation unit.
Load bearing capacity:
Steel elements 1.5 t
Alu elements 750 kg
7,740
Slab Formwork
115168
150
60
Shoring Systems
222
325
60
110
105
Column Formwork
810
Wall Formwork
Formwork Girders
185
Climbing Systems
044770
Lifting Gear-3 TRIO
For transporting stacks of MAXIMO and TRIO
elements.
Safety Instructions
Bridge- and
Tunnel Formwork
Working Platforms
35 0 0
Service
15,600
110
30
Formwork Girders
Item no. Weight kg
Scaffold Brackets TRG
For assembly of a working and concreting scaffold
with MAXIMO and TRIO. Mounted on horizontal
and vertical struts.
Note
Automatically secured when connected.
Technical Data
Permissible load 150 kg/m2
with maximum width of influence 1.35 m.
Wall Formwork
12,800
17,000
120
023670
023680
35
930 / 1297
Column Formwork
1051
440
65
798 / 1165
159
Note
Attached from above to the element, self-securing. Always move with 4-sling lifting gear. Crane
lifting gear points are marked in yellow.
Technical Data
Permissible load 150 kg/m2.
440
1800
Climbing Systems
Working and concreting platform for MAXIMO and
TRIO.
440
Working Platforms
129,000
2680
112588
5,520
Bridge- and
Tunnel Formwork
1330
123
1210
996
1165
TRIO Stripping Bar
1180
Ø26
31
Service
022950
Shoring Systems
Slab Formwork
673
165
Formwork Girders
Item no. Weight kg
027680
49,600
For assembly of Brace Frame SB-1.2 on MAXIMO,
TRIO and DOMINO elements.
Safety Instructions
Load-bearing point: capacity 1.0 t
with crane sling angle ≤ 15°.
240
265
max 1650
650
490
min 1270
120
1770
Column Formwork
160
60
Wall Formwork
250
027690
027590
113255
114107
0,368
2,400
0,433
1,250
025740
9,140
Accessories
Bolt Ø 19 x 165, galv.
Hook Strap for SB-1, 2, galv.
For connecting MAXIMO, TRIO and DOMINO elements with Brace Frames SB-A0, A, B, C.
Note
1 piece per anchor point.
Working Platforms
Climbing Systems
120
130
Shoring Systems
Slab Formwork
21
125
027690
113255
114107
0,368
0,433
1,250
113255
0,433
130
Accessories
Bolt Ø 19 x 165, SB-TRIO, galv.
For connecting MAXIMO elements with Brace
Frames SB.
Service
Bridge- and
Tunnel Formwork
180
127
Q45
Ø19
114107
1,250
Frames SB.
83
32
Ø 54
Formwork Girders
Note
Spray with release agent before every use to
ensure easier striking.
Technical Data
Permissible tension force 90 kN.
Wall Formwork
Anchors MX 15-25
For wall thicknesses 15 - 25 cm.
196
Item no. Weight kg
113847
3,940
130
Column Formwork
688
Note
Technical Data
Slab Formwork
Anchors MX 20-30
738
Anchors MX 30-40
Note
Technical Data
Climbing Systems
4,310
Technical Data
130
Wingnut MX
Counter nut for Tie MX.
141
33
Service
2,560
196
112386
130
Bridge- and
Tunnel Formwork
838
Working Platforms
196
112464
130
Shoring Systems
4,060
196
112387
Formwork Girders
Item no. Weight kg
114290
2,100
Tie Rod Spanner MX
For easy release of the Tie MX.
116353
0,004
Plug MXM Ø 21
For MAXIMO Multi Panels MXM, Inside Corners
50/20, Outside Corners 90 and Standard Elements
for single-sided application.
Ø21
Ø 24
0,017
24
For closing MX tie holes in the concrete.
Ø 32
114300
Shoring Systems
Slab Formwork
Ø15
Column Formwork
Wall Formwork
600
18
0,057
Climbing Systems
114509
Stopper MX 84 MF
Note
With pressing water (waterproof concrete).
Test report available!
Working Platforms
30
17
82
114496
0,043
Stopper MX 50 MF
Note
For use with non-pressing water.
Service
30
114503
0,036
Stopper MX 50 OF
For closing MX tie holes in the concrete if the flange should not be visible.
Note
For use with non-pressing water.
50
17
Bridge- and
Tunnel Formwork
17
48
34
Formwork Girders
132
0,183
Sealing Cone MX 55
For use with MAXIMO. Use with Anchor MX.
Note
For use with waterproofed concrete or architectural concrete. Install on both sides.
Ø62
112937
Column Formwork
Wall Formwork
27
Stud Spanner MAXIMO
For holding Stopper MX 84 MF and MX 50 MF.
36
Item no. Weight kg
114619
0,037
Slab Formwork
54
0,893
Shoring Systems
114797
Accessories
For removing Sealing Cone MX 55.
Cone MX DR 22
For the use with DW 15 Tie Rods.
Fitts for Spacer Tubes DR 22.
Working Platforms
0,012
21
113018
25
Climbing Systems
560
Ø52
Ø36
0,077
Ø16,5
112342
15
Bridge- and
Tunnel Formwork
Ø 63
29
35
Service
0,893
95
114797
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Ø 34
Formwork Girders
Item no. Weight kg
112338
0,011
Ø 45
113183
36
0,556
Ø 30
200
170
Wall Formwork
16
30
Service
37
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
TRIO Panel Formwork
023500
023301
023201
023200
054414
023300
106126
027690
023660
107546
054511
054512
054510
054528
054529
023640
023550
022950
027680
025740
023891
023971
107021
107009
022661
022581
054375
054519
054517
023270
023170
054384
101823
101813
101829
023450
023460
054430
023800
023010
101592
023650
023820
022660
022580
022840
054374
103284
103317
054518
107738
107793
106608
044760
044770
115168
023690
023440
023860
023980
022630
022540
054344
103330
103337
023880
023870
38
Artic. Corner TRIO Structure TSGE 120
Articulated Corner TGE 270
Articulated Corner TGE/4 330
Articulated Corner TGE120
Base Spindle TRH
Brace TRP 150-210, compl.
Bracing TRP 120
Bracing TRP 240
Compensation Waler TAR 85
Corner Alu TAE 270/2
Corner Alu TAE 90/2
Corner Handrail TRP
Corner Platform TRP
Corner TRIO Structure TSE 120
Corner TRIO Structure TSE/4 330
End Guardrail Frame TRP
Erection Device TRP 200, 10 kN
Filler Plate LA 120 x 36
Filler Plate LA/4 330 x 36
Filler Profile TPP 120, Alu
Filler Support TPA 120
Foundation Strap TRIO
Foundation Tie Clamp TRIO
Guardrail Post Holder TRIO
Inside Corner TE 120-2
Inside Corner TE/4 330
Internal Corner TEI 120/135°
Kicker TRP
Ladder 240-360
Landing TRP
Landing w. Ladder TRH 90
Lifting Gear "Combi"-2 TRIO
Lifting Gear-3 TRIO
Lifting Hook TRIO 1.5 t
Lifting Pin TRIO
Multi Panel Alu TAM 270 x 72
Multi Panel TRM 120 x 72
Multi Panel TRM/4 330 x 72
Outside Corner TEA 120/135°
Panel Alu TRA 270 x 30
61
61
60
48
42
53
72
64
63
71
71
71
71
71
71
62
61
66
64
64
59
60
70
70
61
60
60
73
72
54
49
44
55
50
44
55
50
44
67
66
66
63
63
53
47
57
42
54
47
71
72
73
72
67
67
68
68
68
58
60
53
47
42
54
48
58
58
023850
023900
023960
023950
022600
022514
022650
022640
022610
022620
022510
022570
022560
022550
022530
022520
022820
022810
022800
022790
054314
054304
054364
054354
054334
054324
022601
022651
022641
022621
022611
022511
022571
022561
022551
022531
022521
054315
054305
054365
054355
054335
054325
022631
022541
054345
023020
054501
054506
054500
054505
054504
054503
054502
030300
023560
107019
023590
023680
023670
026647
105524
105523
105525
750303
115058
023030
Panel TR 120 x 120
Panel TR 120 x 240
Panel TR 120 x 30
Panel TR 120 x 60
Panel TR 120 x 90
Panel TR 120 x7 2
Panel TR 270 x 120
Panel TR 270 x 240
Panel TR 270 x 30
Panel TR 270 x 60
Panel TR 270 x 72
Panel TR 270 x 90
Panel TR 60 x 30
Panel TR 60 x 60
Panel TR 60 x 72
Panel TR 60 x 90
Panel TR/4 330 x 120
Panel TR/4 330 x 30
Panel TR/4 330 x 60
Panel TR/4 330 x 72
Panel TR/4 330 x 90
Panel TRIO Structure TS 120 x 120
Panel TRIO Structure TS/4 330 x 120
Panel TRIO Structure TSM 120 x 72
Panel TRIO Structure TSM/4 330 x 72
Perforated Foundation Tie, 25 m
Platform TRP 120
Platform TRP 120 with Hatch
Platform TRP 240
Platform TRP 60
Platform TRP 72
Platform TRP 90
Plug Ø 20/24 mm
Projection Waler TVR45/45
Retainer Corner Platform TRP
Scaffold Bracket TRG 100/112
Screw Plate DW 15/115, galv.
Shaft Element TSE 120
Stacking Aid TRIO DW 20
Stopend Panel TR 120 x 24
57
59
59
59
52
51
53
52
52
52
45
45
46
46
46
45
57
57
57
56
40
40
41
41
41
40
61
61
61
61
61
60
60
60
60
60
60
60
60
60
60
60
60
61
60
60
66
69
69
69
69
69
69
69
63
62
70
65
65
65
70
55
49
43
69
68
55
Formwork Girders
TRIO Panel Formwork
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
48
43
56
56
51
51
56
56
56
56
50
50
50
50
56
56
56
56
51
51
51
51
67
63
62
61
62
54
49
54
54
49
49
43
43
43
61
61
60
60
60
60
Stopend Panel TR/4 330 x 24
Stopend Panel TRIO AT 120 x 3
Stopend Panel TRIO MT 120 x 20
Stopend Panel TRIO MT 120 x 24/25
Stopend Panel TRIO MTF 120 x 20
Stopend Panel TRIO MTF 120 x 24/25
Top Tie Bracket-2 AH, galv.
TRIO Stripping Bar
Universal Waler 245
Waler 85
Waler Stop
Wall Thickness Comp. WDA 120 x 10, Alu
Wall Thickness Comp. WDA-2 120 x 5
Wall Thickness Comp. WDA/4 330 x 10, Alu
Wall Thickness Comp. WDA/4-2 330 x 5
Wall Thickness Comp. WDAS 120 x 5, Alu
Wall Thickness Comp. WDAS/4 330 x 5, Alu
39
Service
023040
023050
023067
105978
023060
105953
023068
023069
023071
023072
023061
023062
023064
023065
023081
023080
023078
023079
023074
023075
023077
023076
023630
112588
023920
023551
023930
023990
023995
023282
023292
023182
023192
054435
054391
054401
023281
023291
023181
023191
054395
054405
Item no. Weight kg
054304 398,000
Steel panel with 18 mm plywood.
475
575
1075
Column Formwork
540
1320
540
054314
195,000
475
575
Climbing Systems
1075
3300
600
Shoring Systems
575
Slab Formwork
2400
054324
140,000
120
Panel TR/4 330 x 90
475
575
1075
3300
600
Bridge- and
Tunnel Formwork
575
Working Platforms
1200
900
Service
3300
600
Wall Formwork
575
Formwork Girders
TRIO Panel Formwork
40
120
120
300
Bridge- and
Tunnel Formwork
575
Panel TR/4 330 x 30
Working Platforms
1075
Climbing Systems
575
475
600
575
Panel TR/4 330 x 60
Slab Formwork
720
600
Shoring Systems
3300
1075
Column Formwork
575
600
Wall Formwork
475
3300
575
Formwork Girders
Panel TR/4 330 x 72
41
Service
600
74,200
475
054364
107,000
3300
054354
1075
Item no. Weight kg
054334 119,000
575
TRIO Panel Formwork
120
120
120
Steel panel with 18 mm plywood. For oblique
angles, wall connections etc.
Complete with
88 pc. 030300 Plug Ø 20/24 mm
575
Item no. Weight kg
054344 133,000
475
1075
Column Formwork
75
054414
119,000
120
575
19 x 30 = 570
Steel panel with 18 mm plywood. For 90° internal
corners.
575
85,800
475
300
180
575
120
1075
Climbing Systems
3300
600
Shoring Systems
475
600
575
Steel panel with steel formlining. For oblique
angles from 75° upwards, used externally and
internally.
1075
3300
575
300
42
300
120
Slab Formwork
054374
Bridge- and
Tunnel Formwork
Working Platforms
720
75
Service
3300
600
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork
Item no. Weight kg
Wall Thickness Comp. WDA/4 330
Wall Formwork
B
50
60
100
Slab Formwork
Climbing Systems
480
3298
Working Platforms
297
569
100
1200
1080
300
3300
1075
475
600
Bridge- and
Tunnel Formwork
575
575
62,300
Shoring Systems
569
100
1500
300
023050
120
120
Complete with
7 pc. 105400 Bolt Ø 20 x 140, galv.
Safety Instructions
Load-bearing point capacity 2.0 t.
450
Panel for moving complete shaft internal formwork.
600
142,000
100 62
301
105525
Column Formwork
600
480
3300
480
600
570
B 60
240
120
43
Service
20,100
21,400
12,400
570
054391
054401
054435
Item no. Weight kg
054384
62,200
For continuous compensations from 6 to 36 cm.
400
480
570
120
50
Column Formwork
054430
6,400
For compensations with 21 mm filler plates.
96
45
101829
9,790
3300
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
3260
Shoring Systems
Slab Formwork
550
1030
Ø24
3300
600
Wall Formwork
570
Formwork Girders
TRIO Panel Formwork
60
Service
98
51
44
Formwork Girders
TRIO Panel Formwork
Panel TR 270 x 240
Wall Formwork
Column Formwork
2700
575
1550
575
Item no. Weight kg
022570 329,000
541
1320
539
120
Panel TR 270 x 120
Shoring Systems
Climbing Systems
2700
1550
575
2700
Bridge- and
Tunnel Formwork
575
Panel TR 270 x 90
1550
115,000
575
022520
120
Working Platforms
1200
900
120
45
Service
162,000
575
022510
Slab Formwork
2400
Service
575
575
Working Platforms
575
Climbing Systems
575
Slab Formwork
022550
022560
46
87,400
60,300
300
2700
1550
Shoring Systems
575
Column Formwork
720
600
Panel TR 270 x 30
120
2700
1550
Wall Formwork
575
Formwork Girders
Item no. Weight kg
022530
97,200
2700
1550
Bridge- and
Tunnel Formwork
TRIO Panel Formwork
Panel TR 270 x 72
120
Panel TR 270 x 60
120
Formwork Girders
TRIO Panel Formwork
Wall Formwork
Complete with
44 pc. 030300 Plug Ø 20/24 mm
103317
57,700
corners.
Slab Formwork
corners.
Shoring Systems
69,800
2700
1550
575
Bridge- and
Tunnel Formwork
Working Platforms
300
180
575
120
Climbing Systems
2700
1550
575
022580
75
120
575
19 x 30 = 570
Column Formwork
2700
1550
720
75
189
575
120
9
18
135
°
47
Service
575
Item no. Weight kg
022540 102,000
Steel panel with 18 mm plywood. For 135° external corners.
1550
Column Formwork
0
29
575
290
023200
94,900
135°
internally.
2700
575
300
50,500
240
Service
2700
575
1550
Bridge- and
Tunnel Formwork
575
023040
48
120
300
120
1550
575
Shoring Systems
Slab Formwork
12
0
Climbing Systems
Working Platforms
2700
575
Item no. Weight kg
103337
75,600
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork
569
1560
300
Wall Thickness Comp. WDA 270
B
50
60
100
Shoring Systems
16,200
17,200
10,100
Working Platforms
120
Bridge- and
Tunnel Formwork
570
2700
1510
Ø24
550
120
50
400
570
48,900
100 62
120
570
B 60
023170
Climbing Systems
2700
1560
570
023182
023192
023995
Slab Formwork
297
569
100
450
900
2698
Column Formwork
100
1200
300
Wall Formwork
Complete with
7 pc. 105400 Bolt Ø 20 x 140, galv.
Safety Instructions
49
Service
301
Item no. Weight kg
105523 127,000
Item no. Weight kg
023460
4,710
96
45
101813
8,050
60
98
51
023061
023062
023064
023065
27,500
30,400
37,300
41,300
Stopend Panels TRIO MT w/o waterstop bar
Centre piece without waterstop bar installation for
stopend formwork.
B
118
158
218
268
2700
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
2700
Shoring Systems
Slab Formwork
Column Formwork
2660
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Service
120
B
50
Formwork Girders
TRIO Panel Formwork
Item no. Weight kg
B
118
158
218
268
Wall Formwork
Stopend Panel TRIO MTF w waterstop bar
Centre piece with waterstop bar installation for
stopend formwork.
Column Formwork
29,200
33,400
38,600
42,500
2700
023074
023075
023077
023076
17,200
19,000
Stopend Panel TRIO AT
External piece for stopend formwork.
Note
Concrete cover approx. 30 or 50 mm.
AT 270 x 3
AT 270 x 5
210
Working Platforms
1320
540
Bridge- and
Tunnel Formwork
540
120
2400
51
Service
800
175 25
Panel TR 120 x 240
1200
163,000
25 175
022514
120
120
210
Climbing Systems
2700
Shoring Systems
023060
105953
Slab Formwork
120
B
Item no. Weight kg
022600
76,100
Panel TR 120 x 120
850
325
1200
Wall Formwork
25
Formwork Girders
TRIO Panel Formwork
120
Column Formwork
1200
58,200
Panel TR 120 x 90
850
325
1200
25
Slab Formwork
022610
Shoring Systems
48,600
Panel TR 120 x 72
850
325
Working Platforms
120
720
43,400
Panel TR 120 x 60
850
325
1200
25
022640
Bridge- and
Tunnel Formwork
1200
25
Climbing Systems
022620
Service
120
900
600
52
120
Formwork Girders
TRIO Panel Formwork
Panel TR 120 x 30
Wall Formwork
1200
325
850
25
Item no. Weight kg
022650
28,400
120
Column Formwork
300
Complete with
44 pc. 030300 Plug Ø 20/24 mm
Slab Formwork
56,300
837
19 x 30
75
120
33,200
corners.
023300
43,600
internally.
120
300
300
120
834
333
1200
33
Bridge- and
Tunnel Formwork
Working Platforms
300
180
335
830
1200
35
022660
Climbing Systems
720
53
Service
75
Shoring Systems
333
1200
30
022630
corners.
35
Item no. Weight kg
103284
26,900
120
1
89
335
830
189
1200
Wall Formwork
Formwork Girders
TRIO Panel Formwork
°
Column Formwork
135
34,900
Steel panel with 18 mm plywood. For 135° external corners.
1200
12
0
29
290
135°
7,610
8,090
4,680
Wall Thickness Comp. WDA 120
550
400
1200
300
333
54
120
120
24,500
100
120
1200
333
300
B
534 33
Bridge- and
Tunnel Formwork
023270
Service
B
50
60
100
534 33
023282
023292
023990
Working Platforms
Climbing Systems
Shoring Systems
335
830
35
Slab Formwork
103330
0
Formwork Girders
TRIO Panel Formwork
566
100
300
Slab Formwork
850
325
1200
25
23,100
100
Column Formwork
632
600
1198
297
300
023030
Wall Formwork
Complete with
5 pc. 105400 Bolt Ø 20 x 140, galv.
Safety Instructions
450
301
Item no. Weight kg
105524
72,600
Shoring Systems
Climbing Systems
2,060
1160
023450
120
Bridge- and
Tunnel Formwork
60
51
98
3,600
1200
101823
Working Platforms
96
45
55
Service
240
Item no. Weight kg
7,780
8,580
Stopend Panel TRIO AT
Note
210
Column Formwork
Slab Formwork
11,800
13,500
16,300
18,500
Stopend Panels TRIO MT w/o waterstop bar
Centre piece without waterstop bar installation for
stopend formwork.
120
B
12,800
14,700
16,800
18,600
Stopend Panels TRIO MTF w. waterstop bar
Centre piece with waterstop bar installation for
stopend formwork.
B
120
1200
B
118
158
218
268
34,500
Panel TR 60 x 90
600
Bridge- and
Tunnel Formwork
022790
Service
B
118
158
218
268
1200
023081
023080
023078
023079
Working Platforms
Climbing Systems
Shoring Systems
023068
023069
023071
023072
900
56
AT 120 x 5
210
120
1200
AT 120 x 3
120
120
023067
105978
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork
Panel TR 60 x 72
720
Column Formwork
Panel TR 60 x 60
120
15,600
Panel TR 60 x 30
corners.
023850
70,200
Aluminium panel with 18 mm plywood.
120
Working Platforms
180
600
Bridge- and
Tunnel Formwork
2700
575
1550
575
35
530
300
18,000
35
022840
120
Climbing Systems
300
Shoring Systems
600
022820
Slab Formwork
600
900
120
57
Service
25,700
120
600
022810
Wall Formwork
600
Item no. Weight kg
022800
28,900
Item no. Weight kg
023870
49,300
2700
575
Column Formwork
1550
Wall Formwork
575
Formwork Girders
TRIO Panel Formwork
31,400
2700
1550
575
Climbing Systems
023860
60,800
Alu panel with 18 mm plywood. For oblique
120
Complete with
44 pc. 030300 Plug Ø 20/24 mm
2700
1550
575
Bridge- and
Tunnel Formwork
720
575
75
58
19 x 30 = 570
75
120
Working Platforms
300
Service
120
575
023880
Shoring Systems
Slab Formwork
600
Formwork Girders
TRIO Panel Formwork
Wall Formwork
Alu element with 18 mm plywood. For 90° internal
corners.
Slab Formwork
300
Shoring Systems
25
850
325
120
Working Platforms
18,000
900
023950
Climbing Systems
1200
300
10,700
900
023960
120
Bridge- and
Tunnel Formwork
600
120
59
Service
33,600
900
023900
180
575
120
Column Formwork
2700
1550
575
Item no. Weight kg
023891
42,100
Alu panel with 18 mm plywood. For oblique
Complete with
44 pc. 030300 Plug Ø 20/24 mm
75
30
120
900
19 x 30 = 570
15,200
Corner Alu TAE 90/2
Alu element with 18 mm plywood. For 90° internal
corners.
054305
054315
054325
054335
054355
054365
054345
054375
054395
054405
374,000
183,000
131,000
112,000
101,000
71,100
128,000
80,200
10,800
11,700
Panels TRIO Structure TS/4 330
Panel with 21 mm base plate.
022571
022511
022521
022531
022551
022561
022541
022581
023201
023181
023191
310,000
152,000
108,000
91,600
82,700
58,100
98,900
65,400
88,700
8,850
9,560
Panels TRIO Structure TS 270
35
60
120
300
180
900
35
023971
830
Column Formwork
75
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
720
30
Item no. Weight kg
023980
23,600
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork
Item no. Weight kg
4,350
Wall Formwork
023500
Panels TRIO Structure TS 120
Column Formwork
72,000
55,000
46,000
41,300
27,200
54,000
30,900
41,300
3,970
4,320
Technical Data
61
288
12,300
TRIO and MAXIMO. With captive connecting components.
259
Technical Data
80
Working Platforms
Technical Data
80
61
Service
850
30
Waler 85
Corresponds to Compensation Waler TAR 85 but
without mounting hooks.
105
8,520
30
023551
Bridge- and
Tunnel Formwork
30
105
184
30
850
Climbing Systems
023550
Shoring Systems
164
max 220
Slab Formwork
022601
022611
022621
022641
022651
022631
022661
023301
023281
023291
Formwork Girders
TRIO Panel Formwork
Item no. Weight kg
023560
8,930
Projection Waler TVR 45/45
For connecting on internal corners without using
TE Corners, particularly for wall offsets.
450
Column Formwork
40
115
184
30
Wall Formwork
450
023920
78,400
Universal Waler 245
For anchoring obliques angles especially with thick
walls and for special applications.
Complete with
6 pc. 024180 Compensation Washer 20, galv.
3 pc. 104178 Spacer Unit HFT
3 pc. 024910 Bolt ISO 4014 M20 x 100-8.8, galv.
3 pc. 781053 Nut ISO 7042 M20-8, galv.
Slab Formwork
2466
212
52
Shoring Systems
60
4,100
Climbing Systems
023930
140
87,5
52,5
80
Ø50
X x 60
132
Waler Stop
For use with the Universal Waler 245.
44
130
024240
022030
0,805
2,170
023640
1,140
34
Accessories
Wedge KZ, galv.
Tie Rod Cylinder Yoke SW, galv.
in MAXIMO and TRIO elements. DW 15 thread.
Technical Data
Service
DW 15
440
62
140
Bridge- and
Tunnel Formwork
Working Platforms
80
80
350
58
80
Formwork Girders
TRIO Panel Formwork
Wall Formwork
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
185
169
Item no. Weight kg
023660
3,310
Column Formwork
222
82
30
Ø15
023650
0,769
Slab Formwork
Technical Data
Shoring Systems
Technical Data
20
58
400
Climbing Systems
0,375
68
023820
DW 15
Note
Delivery unit of 250 pieces.
Working Platforms
Plug Ø 20/24 mm
For sealing tie holes Ø 20 and Ø 24mm which are
not required.
Ø 29
0,003
17
030300
TRIO Stripping Bar
1180
5,520
Ø26
63
Service
112588
Bridge- and
Tunnel Formwork
20
Formwork Girders
TRIO Panel Formwork
Item no. Weight kg
027680
49,600
Safety Instructions
240
265
max 1650
650
490
min 1270
120
1770
Column Formwork
160
60
Wall Formwork
250
027690
027590
113255
114107
0,368
2,400
0,433
1,250
025740
9,140
Accessories
Note
Working Platforms
Climbing Systems
125
027690
113255
114107
0,368
0,433
1,250
027690
0,368
130
Accessories
For panel formwork with 12 cm overall thickness.
165
Bridge- and
Tunnel Formwork
125
Service
Ø19
64
120
130
Shoring Systems
Slab Formwork
21
Formwork Girders
TRIO Panel Formwork
Item no. Weight kg
Scaffold Brackets TRG
with MAXIMO and TRIO. Mounted on horizontal
Note
Technical Data
Wall Formwork
12,800
17,000
120
023670
023680
35
Column Formwork
930 / 1297
1051
440
65
798 / 1165
159
max 1135
Climbing Systems
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
When attaching to the top strut, the scaffolding
platform can be cantilvered up to the front edge of
the formlining.
Technical Data
Working Platforms
976
160
Bridge- and
Tunnel Formwork
105
with TRIO and MAXIMO. Mounted on horizontal
65
Service
13,000
853
023590
Shoring Systems
Slab Formwork
673
165
For assembling a guardrail on TRIO elements.
Complete with
Technical Data
Maximum width of influence 1.35 m.
100
213
302
43
Item no. Weight kg
101592
2,820
Wall Formwork
Formwork Girders
TRIO Panel Formwork
034580
3,520
022950
129,000
Accessories
Guardrail Post HSGP
Working and concreting platform for MAXIMO and
TRIO.
Note
Attached from above to the element, self-securing. Always move with 4-sling lifting gear. Crane
lifting gear points are marked in yellow.
Technical Data
Shoring Systems
Slab Formwork
Column Formwork
155
440
1800
440
996
123
023010
2,330
For anchoring foundation formwork in combination
with the Perforated Foundation Tie.
1330
171
Note
Wrench size SW 14.
65
SW 14
0,676
For use with Foundation Tie Clamp TRIO, DOMINO
and HANDSET.
Technical Data
Permissible tension force 16.0 kN
50
023020
20
Service
1210
1165
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
2680
50
66
22
Formwork Girders
TRIO Panel Formwork
For grid-independent anchoring outside of the
panel, especially for foundations and height extensions.
182
Technical Data
Permissible anchor tension force:
Hole 1 = 15 kN
Hole 2 = 30 kN
Column Formwork
2,080
Wall Formwork
88
342
023630
150
For connecting TRIO panels with 6 cm wide edge
profiles, assembled in a "windmill" configuration.
48
Item no. Weight kg
023800
4,840
1
150
2
Ø20,5
For transporting stacks of MAXIMO and TRIO elements. For attaching Lifting Hook TRIO 1.5 t and
stacking devices.
Slab Formwork
26,100
Safety Instructions
Follow Instructions for Use at all times.
Shoring Systems
044760
145
Safety Instructions
Working Platforms
Lifting Gear-3 TRIO
elements.
35 0 0
Bridge- and
Tunnel Formwork
15,600
044770
Climbing Systems
350 0
67
Service
100
Note
Safety Instructions
Load-carrying capacity with crane sling
angle ≤ 30°:
Steel element 1.5 t.
Aluminium element 750 kg.
60
208
523
Column Formwork
80
184
115168
7,740
Shoring Systems
100
Safety Instructions
Load bearing capacity:
Steel elements 1.5 t
Alu elements 750 kg
60
185
115058
7,490
023440
0,312
Lifting Pin TRIO
For easy carrying of TRIO elements.
110
Safety Instructions
Service
150
105
18
Bridge- and
Tunnel Formwork
810
Working Platforms
Climbing Systems
60
222
325
110
Slab Formwork
112
Item no. Weight kg
023690
7,050
Wall Formwork
Formwork Girders
TRIO Panel Formwork
68
260
Formwork Girders
TRIO Panel Formwork
Wall Formwork
25
Prevents elements sliding and protects the plywood formlining against damage.
56
Shoring Systems
1265
700
119
750
240
240
1180
Climbing Systems
L
X
580
150
700
270
880
450
1180
750
2380
1950
Technical Data
215
X
L
215
1265
Platforms TRP
Platform TRP 60
Platform TRP 72
Platform TRP 90
Platform TRP 120
Platform TRP 240
Working and concreting platform for TRIO. With 45
mm thick decking.
1050
56,700
60,400
66,600
75,000
107,000
119
054504
054503
054502
054501
054500
Slab Formwork
Column Formwork
Technical Data
Working Platforms
Platforms TRP with Hatch
Working and concreting platform for TRIO. With
45 mm thick decking and integrated, self-closing
access hatch.
Bridge- and
Tunnel Formwork
90,500
131,000
1050
054506
054505
69
Service
22
Item no. Weight kg
750303
0,022
Item no. Weight kg
107009
15,000
Corner Platform TRP
Working and concreting platform for TRIO. With 39
mm thick decking. As connecting platform on the
external corners.
630
Wall Formwork
Formwork Girders
TRIO Panel Formwork
107019
107021
026647
0,688
16,400
0,673
107021
16,400
39
Accessories
Corner Handrail TRP
Corner Handrail TRP
For use with the Corner Platform TRP.
520
1561
Slab Formwork
Column Formwork
1682
Shoring Systems
990
1542
0,673
For mounting and assembling TRP, FB 180 and
RUNDFLEX Plus platforms.
15
Climbing Systems
026647
Working Platforms
107019
0,688
For connecting Corner Platform TRP to the adjacent platforms.
50
Bridge- and
Tunnel Formwork
95
Service
50
DW 15
70
60
115
100
Formwork Girders
TRIO Panel Formwork
Kicker TRP
For assembling TRP platforms.
Wall Formwork
40
Item no. Weight kg
054518
7,960
Column Formwork
1212
max. L
1140
1770
2670
3270
Slab Formwork
min. L
770
1070
1970
2570
Shoring Systems
Brace TRP
For assembling TRP platforms.
Climbing Systems
min L
1142
Bridge- and
Tunnel Formwork
Bracing TRP
Bracing TRP 120
Bracing TRP 240
As hroizontal strut on the lowest panel. For mounting Ladder 240-360.
89
870
6,260
11,200
207
054528
054529
Working Platforms
1142
71
Service
23,700
27,000
30,700
33,100
max L
054510
107546
054511
054512
Item no. Weight kg
054517
32,100
For setting up extended TRIO elements.
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Column Formwork
2150
24,100
Ladder 240-360
Adjustable from 2.40 m to 3.60 m.
422
Slab Formwork
107738
N x 300
max 3710
Shoring Systems
min 2360
11,400
Climbing Systems
106608
For attaching to the horizontal struts of TRIO and
TRIO-H elements.
Note
Maximum standing height 1.0 m.
340
621
106126
6,850
Base Spindle TRH
For aligning large TRIO or TRIO-H elements.
min 34
max 353
843
Bridge- and
Tunnel Formwork
Working Platforms
708
Service
142
72
50
Formwork Girders
TRIO Panel Formwork
Landing TRP
For fixing the bottom ladder to the Platform TRP if
Bracing TRP is not used.
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
450
Wall Formwork
Item no. Weight kg
107793
12,900
Column Formwork
732
542
140
Note
Can be used on the right and left.
Slab Formwork
max 1184
min 924
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
73
Service
For securing the front side of the Platform TRP.
1030
11,500
520
054519
Service
74
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
87
84
84
84
84
87
90
88
89
89
85
85
85
89
82
77
86
85
85
86
84
79
83
81
83
80
83
80
82
79
78
76
78
76
81
77
86
87
90
87
88
88
84
88
89
Anchor Bolt PERI MMS 20 x 130
Angle TRH 180 x 15
Angle TRH 180 x 6
Angle TRH 270 x 15
Angle TRH 270 x 6
Base Spindle TRH
Cone Spanner TRH
Extension Waler TRH 165
Guardrail Post HSGP
Guardrail Post TRH
Guardrail TRH 180
Guardrail TRH 270
Inside Corner TRH 330 - 66 x 66
Kicker TRH 135
Ladder TRH 264
Ladder TRH 354
Outside Corner TRH 330 - 90 x 90
Panel TRH 264 x 180 A
Panel TRH 264 x 180 I
Panel w. Corner Platform TRH 264 x 270 I
Prop with Kicker TRH 116
Push-Pull Prop RSS I
Sealing Cone TRH 55
Spacer TRH 15-30
Tie Rod Spanner TRH SW 22
Tie TRH 15 - 30 / 99
Tool Box TRH
Top Tie TRH
Wingnut Pivot Plate DW 15, galv.
75
Service
103606
107607
107600
107608
107601
106126
110634
108995
101592
034580
054475
106147
106148
023650
108842
108830
108225
108566
108568
106608
108785
108808
107474
107470
107481
107480
107473
107472
107493
107492
107498
107497
107503
107502
108983
108984
054461
028010
110675
054464
108719
054480
104032
106087
030370
Formwork Girders
Item no. Weight kg
107502 1080,000
640
Slab Formwork
1200
3540
4383
Column Formwork
125
Wall Formwork
2650
450
900
900
450
107601
25,100
107497
753,000
Climbing Systems
Shoring Systems
2700
Accessories
Angle TRH 270 x 6
906
450
900
1800
107600
Service
3340
640
1200
Bridge- and
Tunnel Formwork
3540
4383
125
Working Platforms
1043
1750
76
17,200
Accessories
Angle TRH 180 x 6
450
340
470
130
Formwork Girders
Item no. Weight kg
108984 1090,000
Panel with 18 mm plywood. Can also be used as
standard wall panel.
640
Slab Formwork
1200
3540
4383
Column Formwork
125
Wall Formwork
2650
450
900
900
450
600
Working Platforms
1475
Climbing Systems
For 90° internal corners
Bridge- and
Tunnel Formwork
4200
660
77
Service
660
264,000
475
108830
Accessories
Angle TRH 270 x 6
1075
25,100
575
107601
Shoring Systems
2700
125
Item no. Weight kg
107503 921,000
640
1200
Column Formwork
3540
Wall Formwork
Formwork Girders
900
900
450
2700
107601
106148
25,100
29,700
107498
635,000
Accessories
Angle TRH 270 x 6
Guardrail TRH 270
640
Working Platforms
1200
3540
Climbing Systems
125
Shoring Systems
Slab Formwork
450
450
900
107600
Service
Bridge- and
Tunnel Formwork
1800
78
17,200
Accessories
Angle TRH 180 x 6
450
340
Formwork Girders
Wall Formwork
Column Formwork
4200
1020
900
Shoring Systems
1680,000
450
900
900
900
900
900
Working Platforms
950
2640
3483
125
5350
450
Accessories
Angle TRH 270 x 6
25,100
Bridge- and
Tunnel Formwork
5400
107601
Climbing Systems
107492
Slab Formwork
575
1020
1075
900
79
Service
475
600
1475
Item no. Weight kg
108808 431,000
Formwork Girders
Item no. Weight kg
107472 1170,000
450
900
900
900
450
3600
107600
17,200
107480
854,000
Accessories
Angle TRH 180 x 6
2650
950
Working Platforms
2640
3483
125
Climbing Systems
Shoring Systems
Slab Formwork
949
2640
3483
Column Formwork
125
Wall Formwork
3550
Service
900
900
2700
107601
Bridge- and
Tunnel Formwork
450
80
25,100
Accessories
Angle TRH 270 x 6
450
Formwork Girders
Wall Formwork
906
450
900
450
340
1800
Shoring Systems
Panel with 18 mm plywood. Can also be used as
standard wall panel.
Climbing Systems
2650
125
900
Working Platforms
450
Bridge- and
Tunnel Formwork
900
2700
450
81
Service
867,000
3483
108983
Accessories
Angle TRH 180 x 6
2640
17,200
130
470
950
107600
Slab Formwork
950
2440
2640
3483
125
1043
1750
Column Formwork
Item no. Weight kg
107470 600,000
For 90° internal corners
575
Item no. Weight kg
108842 213,000
475
1075
Column Formwork
575
660
660
1360,000
125
107493
950
2640
Shoring Systems
Slab Formwork
3300
600
Wall Formwork
Formwork Girders
Climbing Systems
450
900
900
Working Platforms
5400
Bridge- and
Tunnel Formwork
107601
Service
900
82
25,100
Accessories
Angle TRH 270 x 6
900
900
450
Formwork Girders
950
Column Formwork
2640
125
Item no. Weight kg
107473 926,000
450
900
900
900
Wall Formwork
450
3600
693,000
Slab Formwork
107481
Accessories
Angle TRH 180 x 6
Shoring Systems
Climbing Systems
2640
950
450
900
900
450
2700
107474
479,000
Accessories
Angle TRH 270 x 6
Working Platforms
25,100
950
2640
Bridge- and
Tunnel Formwork
125
107601
450
900
450
340
1800
107600
17,200
Accessories
Angle TRH 180 x 6
83
Service
17,200
125
107600
For 90° external corners
575
Item no. Weight kg
108785 348,000
1020
900
475
900
575
1020
1075
Column Formwork
107600
107601
107607
107608
17,200
25,100
34,500
51,700
Shoring Systems
Slab Formwork
3300
600
Wall Formwork
Formwork Girders
Angles TRH
Angle TRH 180 x 6
Angle TRH 270 x 6
Angle TRH 180 x 15
Angle TRH 270 x 15
As bottom spacer - for example, with projecting
installations.
L
1798
2698
1798
2698
Complete with
3 pc. 781053 Nut ISO 7042 M20-8, galv.
L
60 /
150
90
104032
23,800
Tool Box TRH
For storing accessories and tools.
Complete with
4 pc. 722308 Bolt ISO 4017 M8 x 20-8,8, galv.
4 pc. 711071 Nut ISO 7042 M8-8, galv.
4 pc. 780702 Washer ISO 7089 200 HV, A 12, galv.
400
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
M 20x100
Service
216
900
700
84
Formwork Girders
Item no. Weight kg
Wall Formwork
Ladders TRH
Ladder TRH 264
Ladder TRH 354
For TRH Panel. With support at bottom.
300
18,900
23,800
355
108566
108568
246
N x 280 = 1960 / 2800
Column Formwork
2281 / 3121
Guardrail Post TRH
As guardrail for TRH external elements.
Note
2 pieces for panel lengths 180 and 270,
4 pieces for panel lengths 360 and 540.
Slab Formwork
4,210
270
29,700
50
Guardrail TRH 270
As guardrail on TRH external elements.
40
Working Platforms
950
2680
Climbing Systems
106148
Shoring Systems
80 0
788
40 0
14 0
054475
Guardrail TRH 180
As guardrail on TRH external elements.
40
1780
100
85
Service
23,400
950
106147
Bridge- and
Tunnel Formwork
100
Item no. Weight kg
054461
19,600
For aligning TRH elements h = 2.64 m.
Wall Formwork
Column Formwork
0
ma
900
1100
21
150
7,310
Kicker TRH 135
For aligning TRH elements h = 3.54 m and extended formwork.
1350
106608
11,400
For attaching to the horizontal struts of TRIO and
TRIO-H elements.
Note
Maximum standing height 1.0 m.
340
Bridge- and
Tunnel Formwork
621
708
86
21
150
10
100
40
Service
x1
10
108225
Shoring Systems
Slab Formwork
40
Working Platforms
Climbing Systems
1 08
28,61
°
mi n
100
Formwork Girders
Formwork Girders
Wall Formwork
Base Spindle TRH
For aligning large TRIO or TRIO-H elements.
50
142
17,800
Extension length L = 2.05 - 2.94 m.
For aligning PERI formwork systems.
Note
Permissible load: see PERI Design Tables.
min 2050
Slab Formwork
028010
Column Formwork
min 34
max 353
843
Item no. Weight kg
106126
6,850
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
1915
0,330
Re-usable anchor bolt for mounting push-pull
props, bracing etc.
Note
Wrench size SW 30.
Climbing Systems
103606
SW 30
MMS 20
Note
2 pieces with element lengths 180 and 270,
4 pieces with element lengths 360 and 540.
Bridge- and
Tunnel Formwork
464
87
Service
Spacer TRH 15-30
For adjusting the wall thickness on TRH elements
at the top. For wall thicknesses from 15 to 30 cm.
50
2,330
80
054464
Working Platforms
138
Item no. Weight kg
106087
7,450
Top Tie TRH
As top anchor for use with extension panels and
without concreting plate. For wall thicknesses
from 15 to 30 cm.
023500
4,350
054480
4,580
210
120
180
652
Accessories
Tie TRH 15 - 30 / 99
Formwork tie for TRH. For wall thicknesses from
15 to 30 cm.
Note
Wrench size SW 46, SW 22.
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
990
M30
DW 20
SW 22
Shoring Systems
SW 46
3,640
For Anchor TRH.
782
108995
22,100
For extending TRH elements.
Bridge- and
Tunnel Formwork
122
Working Platforms
Climbing Systems
108719
1520
100
110
Service
030370
023650
88
1,560
0,769
Accessories
247
1650
Formwork Girders
Technical Data
20
58
400
Wall Formwork
DW 15
117
Column Formwork
Technical Data
Permissible load 90 kN.
72
Complete with
Technical Data
100
43
For assembling a guardrail on TRIO elements.
213
2,820
302
101592
110
Ø10
Slab Formwork
For anchoring with Tie Rod DW 15 and B 15. With
pivoting captive nut. Maximum angle of tilting 8°.
Shoring Systems
1,560
Climbing Systems
030370
155
Working Platforms
Guardrail Post HSGP
As guardrail for different systems.
Bridge- and
Tunnel Formwork
35
65
1300
3,520
120
034580
Accessories
Guardrail Post HSGP
440
3,520
1050
034580
89
Service
Item no. Weight kg
023650
0,769
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
100
Column Formwork
Ø 62
Wall Formwork
Formwork Girders
Item no. Weight kg
110675
0,172
110634
90
0,383
Sealing Cone TRH 55
For use with TRIO Housing. Use with Anchor TRH.
54
Cone Spanner TRH
For removing Sealing Cone TRH 55.
112
15
Service
91
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
92
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
96
96
103
104
Climbing Systems
Wall Thickness Comp. DWD 250 x 10
Wedge Clamp DKS
Working Platforms
101986
066030
066068
066081
Bridge- and
Tunnel Formwork
104
100
96
103
107
106
105
106
107
101
97
107
105
105
108
100
100
103
96
96
101
97
103
99
99
99
99
103
102
102
102
100
100
94
95
94
94
95
95
107
106
104
104
104
105
97
101
98
108
108
108
102
102
98
98
102
102
102
102
98
98
98
98
106
107
101
101
Alignment Coupler DRS
Articulated Corner DGE 125
Brace Connector DRA
Compensation Waler DAR
Filler Support DPA 125
Foundation Tie Clamp DOMINO DLS
Guardrail Post Holder DOMINO
Guardrail Post HSGP
Lifting Hook DOMINO 500 kg
Multi Panel Alu DMA 125 x 75
Multi Panel DM 125 x 75
Multi Panel DOMINO Alu DMA 250 x 75
Multi Panel DOMINO DM 250 x 75
Outside Corner Angle DAW 125
Panel D 125 x 100
Panel D 125 x 25
Panel D 125 x 50
Panel D 125 x 75
Panel D 75 x 100
Panel D 75 x 25
Panel D 75 x 50
Panel D 75 x 75
Panel DA 125 x 100
Panel DA 125 x 75
Panel DOMINO 250 x 100
Panel DOMINO DA 250 x 100
Plug Ø 20 mm
Positioning DEA 90°
Positioning DGE 135° external
Positioning DGE 135° internal
Scaffold Bracket DG 85
Shaft Element DSE 275
Shaft Panel DSE 125
Spindle Shaft Element DSE
Stacking Aid DOMINO DSH
Stacking Aid DOMINO DSW
Stacking Device DOMINO, galv.
Stopend Panel DOMINO AT 125 x 3
Stopend Panel DOMINO MTF 125 x 20
Stopend Panel DOMINO MTF 125 x 24/25
Stopend Tie-2 DSA
Top Tie Bracket DAH
93
Service
066080
066047
066029
066067
027690
066082
066084
027680
025740
066053
066033
066090
106877
034580
066091
066052
066042
066062
066032
066024
066046
066028
066066
066040
066044
066043
066041
066060
066064
066063
066061
066050
066051
066020
066026
066025
066022
066021
066023
023020
030290
066100
066097
066095
066085
111603
111655
111665
066093
066099
066094
101934
108856
101927
108855
101935
101936
101937
101940
101928
101929
101930
101931
110406
066086
101964
066048
Formwork Girders
Item no. Weight kg
066020
87,700
71,600
117
1440
530
Climbing Systems
750
066025
54,500
117
530
2500
1440
Bridge- and
Tunnel Formwork
530
Working Platforms
2500
530
066022
Service
2500
530
1000
Shoring Systems
Slab Formwork
Column Formwork
1440
Wall Formwork
530
Formwork Girders
500
94
117
Formwork Girders
Wall Formwork
Column Formwork
2500
530
1440
530
Item no. Weight kg
066026
37,700
250
Slab Formwork
Alu panel with 15 mm plywood.
Shoring Systems
Climbing Systems
2500
1440
530
2500
Bridge- and
Tunnel Formwork
530
1440
47,500
530
066023
117
Working Platforms
1000
750
117
95
Service
59,500
530
066021
117
Item no. Weight kg
066024
066032
76,500
50,200
Multi Panels DM/DMA 250
Complete with
46 pc. 030290 Plug Ø 20 mm
2500
1440
Column Formwork
530
Wall Formwork
Formwork Girders
750
22 x 30 = 660
45
066029
39,000
Alu panel with aluminium formlining. For oblique
angles from 75°, can be used internally and
externally.
530
2500
1440
Climbing Systems
250
117
250
530
066030
101986
7,820
11,600
Wall Thickness Comp. DWD 250
For adjusting to wall thicknesses in corners:
with DOMINO.
96
50
27
100
117
530
27
117
1440
2500
530
Bridge- and
Tunnel Formwork
Working Platforms
250
Service
117
Complete with
2 pc. 066100 Positioning DEA 90°
Shoring Systems
Slab Formwork
530
45
Formwork Girders
Wall Formwork
For panel connections to 90° external corners.
Column Formwork
2500
Shoring Systems
Climbing Systems
Working Platforms
Safety Instructions
Load-bearing point: capacity 2.0 t.
Bridge- and
Tunnel Formwork
Element for moving complete shaft internal formwork.
500
117
148,000
2750
111603
93 / 87
45
97
4,150
2490
066033
Slab Formwork
117
117
Service
Item no. Weight kg
066028
10,500
Item no. Weight kg
111665
4,360
For use with Shaft Panel DSE. For spindling back
to the starting position. 1 piece per Shaft Panel
DSE.
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
Note
Wrench size SW 24.
Wall Formwork
SW 24
230
Column Formwork
150
16,200
17,900
Stopend Panels DOMINO AT
248
Note
2500
Shoring Systems
Slab Formwork
101927
108855
AT 250 x 3
Climbing Systems
Working Platforms
27,100
31,200
36,000
39,700
Stopend Panels DOMINO MTF 250
With waterstop bar installation for stopend formwork.
B
118
158
218
268
2500
Bridge- and
Tunnel Formwork
101928
101929
101930
101931
120
B
98
AT 250 x 5
210
117
210
Service
66
117
Formwork Girders
Formwork Girders
Panel D 125 x 100
Wall Formwork
1250
280
930
40
Item no. Weight kg
066040
47,300
1000
Column Formwork
117
Panel D 125 x 75
Slab Formwork
38,700
930
750
Climbing Systems
Panel D 125 x 50
Working Platforms
930
1250
280
930
40
Panel D 125 x 25
1250
18,600
280
066044
117
Bridge- and
Tunnel Formwork
500
250
117
99
Service
28,600
117
40
066043
Shoring Systems
40
240
1250
40
066041
Item no. Weight kg
066050
31,000
Panel DA 125 x 100
930
280
1250
Wall Formwork
40
Formwork Girders
117
Column Formwork
1000
24,800
Panel DA 125 x 75
930
40 240
Shoring Systems
43,700
27,300
Multi Panels DM/DMA 125
117
Complete with
46 pc. 030290 Plug Ø 20 mm
Service
22 x 30 = 660
45
117
932
1250
750
45
280
066047
21,300
angles from 75°, can be used internally and
externally.
Complete with
40
280
100
250
250
117
930
250
1250
Bridge- and
Tunnel Formwork
Working Platforms
38
Climbing Systems
750
066042
066052
1250
40
Slab Formwork
066051
Formwork Girders
Item no. Weight kg
Wall Thickness Comp. DWD 125
Wall Formwork
4,030
5,940
100
Column Formwork
27
117
50
117
27
280
930
1250
40
066048
101964
Slab Formwork
5,490
1250
066046
Climbing Systems
Working Platforms
Safety Instructions
500
Bridge- and
Tunnel Formwork
Shaft Panel DSE 125
Element for moving complete shaft internal formwork.
101
Service
77,100
117
111655
45
93 / 87
For compensations with 21mm filler plates.
1250
2,070
1240
066053
Shoring Systems
117
117
Item no. Weight kg
8,140
8,980
Stopend Panels DOMINO AT
Note
1250
AT 125x3
210
14,600
15,200
17,500
19,300
Stopend Panels DOMINO MTF 125
With waterstop bar installation support for
stopend formwork.
B
118
158
218
268
B
1250
101935
101936
101937
101940
120
Shoring Systems
12,100
Panel D 75 x 25
250
Panel D 75 x 50
280
26,600
Panel D 75 x 75
102
750
066061
117
280 430 40
500
750
Service
750
19,300
117
430 40
066063
Bridge- and
Tunnel Formwork
Working Platforms
280
430 40
Climbing Systems
066064
750
Slab Formwork
Column Formwork
117
210
AT 125x5
117
117
101934
108856
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
280
430 40
Panel D 75 x 100
750
1000
31,600
Steel element with 15 mm plywood. For obliques
angles, wall connections, stopends etc.
Complete with
23 pc. 030290 Plug Ø 20 mm
Column Formwork
066062
117
45
117
750
22 x 30 = 660
Complete with
50
Bridge- and
Tunnel Formwork
117
280
117
117
3,500
117
Climbing Systems
27
750
066066
250
430 40
2,520
250
750
066068
750
280 430 40
250
Shoring Systems
angles from 75°, can be used internally and externally.
Working Platforms
12,800
066067
Slab Formwork
280
432 38
750
45
103
Service
Item no. Weight kg
066060
32,400
120
066095
1,060
Complete with
308
M 12x40
40
Column Formwork
Slab Formwork
120
60
165
Item no. Weight kg
066100
1,470
Wall Formwork
Formwork Girders
066097
1,560
Complete with
470
40
Shoring Systems
M 12x40
3,630
Climbing Systems
066080
For all panel connections for DOMINO. Fillers up
to 12 cm.
61
288
066081
1,160
259
Wedge Clamp DKS
For element connections without high loads with
DOMINO.
Service
133
151
25
Bridge- and
Tunnel Formwork
Working Platforms
127
max 173
109
104
Formwork Girders
165
112
40
066085
6,570
with DOMINO.
Technical Data
Permissible load 150 kg/m2 with maximum width
of influence 2.00 m.
45
For assembling a guardrail on DOMINO elements.
Shoring Systems
2,730
Complete with
Technical Data
Climbing Systems
106877
Accessories
Guardrail Post HSGP
146
213
28
3,520
349
034580
Slab Formwork
653
1044
142
Working Platforms
Guardrail Post HSGP
Bridge- and
Tunnel Formwork
35
65
1300
3,520
120
034580
Accessories
Guardrail Post HSGP
440
3,520
1050
034580
Column Formwork
60
40
790
Wall Formwork
DOMINO. With captive connecting components.
105
Service
Item no. Weight kg
066084
8,510
Item no. Weight kg
066082
1,040
Brace Connector DRA
For connecting push pull props and kicker braces
to DOMINO elements.
Ø16x42
120
110406
2,100
68
117
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
98
Stopend Tie-2 DSA
in DOMINO elements. DW 15 thread.
95
Column Formwork
Wall Formwork
Formwork Girders
DW 15
Plug Ø 20 mm
For closing Ø 20 mm tie holes which are not
required.
Note
Delivery unit 500 pieces.
027680
49,600
Working Platforms
Climbing Systems
13
Safety Instructions
240
Service
265
650
1770
max 1650
min 1270
120
490
Bridge- and
Tunnel Formwork
160
60
250
21
027690
027590
113255
114107
106
0,368
2,400
0,433
1,250
Accessories
174
150
0,002
Ø25
030290
Ø21
Shoring Systems
Slab Formwork
443
Formwork Girders
Note
125
0,368
0,433
1,250
027690
0,368
130
Accessories
Column Formwork
027690
113255
114107
120
130
Item no. Weight kg
025740
9,140
Wall Formwork
Slab Formwork
165
125
066090
2,480
Shoring Systems
Ø19
Note
Wrench size SW 14.
SW 14
Working Platforms
Technical Data
20
Top Tie Bracket DAH
panel, especially for foundations.
Ø20,5
100
1,100
100
066086
22
Bridge- and
Tunnel Formwork
50
88
107
Service
and HANDSET.
50
0,676
34
170
023020
Climbing Systems
152
Item no. Weight kg
066091
6,330
For transporting DOMINO elements.
Wall Formwork
Note
Use 2 pieces per transportation unit!
Safety Instructions
Load-carrying capacity with crane sling angle ≤
30° 0.5 t.
80
Plastic. Prevents the element from sliding sideways.
30
0,020
100
19
066093
55
0,030
Climbing Systems
066099
For stacking DOMINO elements. 4 panels per
stack.
066094
7,980
For stacking and transportation of 2-8 DOMINO
panels of all sizes. Suitable for crane and fork-lift
transport. 4 pieces per stack.
50
Safety Instructions
Load-bearing capacity 250 kg per ring, 1 to per
stack.
Follow Instructions for Use!
100
108
125
1115
Bridge- and
Tunnel Formwork
Working Platforms
49
50
Service
195
55
187
Shoring Systems
Slab Formwork
Column Formwork
512
112
Formwork Girders
Service
109
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
110
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
116
113
119
122
123
120
120
120
120
124
117
117
114
114
120
120
115
113
118
116
114
119
117
114
119
123
123
116
113
119
124
115
112
118
116
113
119
124
125
115
115
112
112
112
118
117
118
123
121
121
121
122
121
119
117
114
122
122
122
124
121
Articulated Corner HSG 120
Brace Connector HSRA
Bracket HSK 60
Bulkhead Tie HST, galv.
Cam Nut DW 15, galv.
Clip HSC, galv.
Compensation Waler HSR 59
Crane Hook HSKA
Filler Bar Steel HSAS 120 x 5
Filler Panel HSAP 120 x 15
Filler Plate HSLA 120
Filler Support HSP 120
Foundation Tie Clamp HANDSET HLS
Guardrail Post HSGP
Inside Corner HSE 120
Locking Strip HSS 60
Multi Panel HSM 120 x 45
Outside Corner Angle HSW 120
Pallet HS 120 x 90, galv.
Panel HS 120 x 30
Panel HS 120 x 60
Panel HS 150 x 30
Panel HS 150 x 60
Panel HS 150 x 90
Panel HS 90 x 120
Panel HS 90 x 30
Panel HS 90 x 60
Plug Ø 20 mm
Quick Connector HSSA 10/12, galv.
Scaffold Bracket HSK 80
Scaffold Tube Holder HSGH
Striking Fillet HSL 90
Striking Fillet HSL120
Timber Holder HSKH 22, galv.
Timber Holder SKH 14, galv.
Timber Strut Coupling HSRB
Top Tie Bracket HSAH, galv.
Wingnut Counterplate DW 15, galv.
111
Service
034230
034200
034210
034550
034570
034540
030130
034500
034510
034520
034370
034470
034320
034480
034330
034460
034280
034130
034140
034290
034170
034180
034390
034400
034410
034680
034580
034220
034150
034160
034530
034110
034100
034120
034240
034250
034260
065080
065081
034080
034070
034060
034050
034010
034020
034040
034030
023020
030290
034660
034670
034560
034690
034360
034380
034350
034620
034650
034640
034610
030110
Item no. Weight kg
034060
16,300
Panel HS 150 x 30
850
325
1500
Wall Formwork
325
Formwork Girders
Column Formwork
25 250 25
80
300
28,100
Panel HS 150 x 60
850
Shoring Systems
325
1500
Slab Formwork
325
034050
25
550
25
80
600
39,600
Panel HS 150 x 90
850
325
Working Platforms
300
550
25
900
27,000
Panel with 12 mm plywood. For oblique angles,
wall connections etc.
850
325
1500
325
034100
Bridge- and
Tunnel Formwork
25
450
Service
1500
325
Climbing Systems
034010
112
80
80
Formwork Girders
Wall Formwork
1500
Item no. Weight kg
034130
12,000
80
26,400
Panel with 12 mm plywood. For 90° internal corners.
034200
36,100
Panel with steel formlining. For oblique angles
from 75°, can be used externally and internally.
200
80
113
Service
For connecting panels to 90° external corners.
80
8,160
1499
034250
Bridge- and
Tunnel Formwork
80
200
Working Platforms
1500
Climbing Systems
Shoring Systems
200
120 80
1500
034150
Slab Formwork
Column Formwork
150
Item no. Weight kg
034170
11,000
1500
Wall Formwork
Formwork Girders
Column Formwork
80
200
2,620
For easier striking of narrow shaft formwork.
Conically formed. Always used in pairs.
1500
Slab Formwork
034350
46
40
58
Working Platforms
1499
034320
034480
10,200
10,900
Filler Bar Steel HSAS 150
For wall thickness and length adjustments.
1500
Bridge- and
Tunnel Formwork
13
Shoring Systems
4,690
Climbing Systems
034400
80
Service
80
33
80
114
50 / 60
Formwork Girders
Panel HS 120 x 30
Wall Formwork
1200
325
850
25
Item no. Weight kg
034080
13,400
25 250 25
80
Column Formwork
300
Panel HS 120 x 60
Slab Formwork
23,000
850
325
1200
25
034070
550
25
80
Shoring Systems
25
600
Climbing Systems
Working Platforms
850
1200
325
9,620
1200
034280
80
Bridge- and
Tunnel Formwork
450
150
80
115
Service
22,200
25
034110
Item no. Weight kg
034220
21,300
200
Column Formwork
120 80
1200
Wall Formwork
Formwork Girders
29,100
Panel with steel formlining. For oblique angles
from 75°, can be used externally and internally.
1200
Slab Formwork
034230
200
Shoring Systems
80
200
6,540
80
80
8,770
200
80
1200
Service
1199
034290
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
034240
116
Formwork Girders
Wall Formwork
1200
Item no. Weight kg
034380
2,200
80
Column Formwork
46
13
33
80
Slab Formwork
3,750
1199
034390
Climbing Systems
25 250 25
Bridge- and
Tunnel Formwork
550 25
Panel HS 90 x 30
900
80
300
10,400
25 300
034040
50 / 60
Working Platforms
80
117
Service
8,220
8,720
1200
034370
034470
Shoring Systems
58
40
25
25 300
550 25
Panel HS 90 x 60
900
Item no. Weight kg
034030
17,900
Wall Formwork
Formwork Girders
550
25
80
Column Formwork
600
32,500
Panel HS 90 x 120
325
850
Shoring Systems
17,600
900
450
7,560
80
900
034140
Bridge- and
Tunnel Formwork
Working Platforms
25
850
25
Climbing Systems
034120
Service
25
1200
150
118
80
25
900
300 250 300
Slab Formwork
25
034020
80
Formwork Girders
200
120 80
internally.
Column Formwork
22,000
200
200
80
80
Shoring Systems
4,920
899
034260
Slab Formwork
80
900
034210
Wall Formwork
900
Item no. Weight kg
034160
16,200
Climbing Systems
6,570
200
13
40
119
Service
2,810
899
034410
46
80
33
80
Bridge- and
Tunnel Formwork
58
1,560
900
034360
Working Platforms
80
900
034180
Item no. Weight kg
034330
034460
6,200
6,600
900
Wall Formwork
Formwork Girders
50 / 60
Column Formwork
80
034500
0,380
Clip HSC, galv.
For all panel connections for HANDSET.
50
34
62
034510
5,490
HANDSET. With captive connecting components.
Bridge- and
Tunnel Formwork
110
185
30
160
30
034540
0,812
Working Platforms
For stopend formwork and as tensile locking for
length compensations up to 20 cm.
DW 15
20
Climbing Systems
590
40
30
290
030130
0,318
030130
0,318
Accessories
For anchoring with Tie Rod DW 15 and B 15.
Note
Wrench size SW 27.
Technical Data
50
50
SW 27
Service
DW 15
120
53
Shoring Systems
Slab Formwork
125
Formwork Girders
Note
Wrench size SW 27.
Technical Data
96
Wall Formwork
Item no. Weight kg
030110
0,799
50
110
SW 27
Note
Slab Formwork
Plug Ø 20 mm
required.
Ø25
0,002
Ø21
030290
Column Formwork
DW 15
For assembling scaffold tubes Ø 48 mm for aligning the formwork.
34
Working Platforms
Quick Connectors HSSA, verz.
For assembly of timbers 12 x 10 cm or 12 x 12 cm
as well as timbers or girders 20 x 10 cm for aligning the formwork. With captive wedge.
100 / 120
140 / 160
Bridge- and
Tunnel Formwork
210 / 250
121
Service
260
1,470
1,650
132
125
034660
034670
Climbing Systems
Ø19
60
0,531
117
034690
Shoring Systems
13
Item no. Weight kg
034650
034620
0,200
0,260
Timber Holder HSKH, verz.
For assembly of timbers 12 x 10 cm and timbers
or girders 20 x 10 cm for aligning the formwork.
Wall Formwork
102
179 / 259
Column Formwork
34
Formwork Girders
1,120
to HANDSET elements.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Shoring Systems
Slab Formwork
034550
122
180
60
Ø16x42
034640
1,100
For assembling alignment boards. Mounted to the
HSRA Brace Connector.
60
Ø5
6
Ø17
034560
4,920
Working Platforms
Climbing Systems
400
with HANDSET.
Note
Technical Data
923
86
Service
034580
122
3,520
Accessories
Guardrail Post HSGP
489
Bridge- and
Tunnel Formwork
410
120
10
Bracket HSK 60
For erection of a working scaffold at low formworking heights.
Technical Data
895
86
1001
Column Formwork
40
600
380
40
10
Wall Formwork
Item no. Weight kg
034570
9,320
Formwork Girders
Guardrail Post HSGP
Slab Formwork
3,520
35
Shoring Systems
65
1300
1050
440
120
034580
Note
Wrench size SW 14.
Climbing Systems
2,580
349
034680
90
Working Platforms
SW 14
Technical Data
50
22
123
Service
and HANDSET.
50
0,676
20
023020
152
Bridge- and
Tunnel Formwork
43 84
panel, especially for foundations.
90
0,681
60
034610
5
35
784
82
Column Formwork
55
As top anchor point for foundations. Wall thicknesses from 15 to 60 cm in 5 cm increments.
80
Item no. Weight kg
034530
1,910
Wall Formwork
Formwork Girders
034520
4,520
Crane Hook HSKA
For transporting HANDSET elements.
Shoring Systems
Slab Formwork
70
110
Note
Safety Instructions
Load-carrying capacity with crane sling angle ≤
30° 0.5 t.
340
For stacking and transportation of HANDSET elements.
Safety Instructions
Load-carrying capacity 750 kg.
820
Bridge- and
Tunnel Formwork
Service
64,700
72
124
1070
065080
Working Platforms
Climbing Systems
Ø16
1210
910
1360
1030
Formwork Girders
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
1030
Bridge- and
Tunnel Formwork
910
1580
1510
125
Service
1240
Wall Formwork
Safety Instructions
Load-bearing capacity 750 kg.
820
1070
Item no. Weight kg
065081
66,300
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
010350
022400
103054
013220
013210
013230
072220
072140
104929
107185
103518
104031
013240
031200
100541
013130
013140
013180
027070
027060
022410
018060
024220
013010
021980
021990
111238
070760
010180
010270
010190
072240
022380
022440
072150
710001
103932
072160
024480
104027
103992
710240
024140
024630
030260
101706
024600
028050
028070
103865
034580
112159
027590
024070
024080
104930
104096
104931
103845
010200
107738
024270
024260
024090
072230
101395
103850
126
Additional Row of SRZ Slots
Adjusting Spindle RKR, compl..
Articulated Coupling GKS 60/60 S
Articulated Coupling GKZ 60/60
Articulated Coupling GKZ Spec. Length
Bit Holder for SCU 7-9
Bit Point TX 30
Bolt ISO 4014 M8 x 150-8.8, galv.
Bolt ISO 4014 M8 x 180-8.8, galv.
Bolt ISO 4014 M8 x 190-8.8, galv.
Bolt Ø 21 x 120
Bulkhead Tie
Chamfer Strip with Flange l = 2.50 m
Connector for Platform VARIO
Corner Coupling EKZ 76/76
Corner Coupling EKZ Spec. Length
Corner Scaffold Bracket EGB 80, left
Corner Scaffold Bracket EGB 80, right
Corner Spindle RKR
Cotter Pin 4/1, galv.
Coupling Compression Plate KDP
Coupling VKZ 99
Crane Eye 24, left
Crane Eye 24, right
Crane Hook 2 t / GT 24
Crane Splice GT 24
Cross Waler KRZ U-100 Spec. Length
Cross Waler KRZ U-140, Spec. Length
Depth Chuck for SCU 7-9
Double Spindle with Wheel RKR
Double Spindle without Wheel RKR
Electric Power Wrench M 14, ASB 636
End Plate SRZ
End Platform VARIO
Extension 1/2" l = 250 mm
Extension Splice 24-2
Extension VARIO 24 U120
External Corner Platform VARIO
F.H. Bolt DIN 603 M8 x 100 MU, galv.
Fix Strap U100-120, galv.
Formwork Joint 21/20 l = 2.50 m
Girder Claw HB U100-U120, galv.
Girder Headpiece GT 24, galv.
Girder Headpiece GT 24/A, galv.
Guardrail for End Platform VARIO
Guardrail Post HSGP
Handrail Post Holder VARIO
Hook Strap HB 24-100/120, galv.
Hook Strap Uni Double HBUD 20-24
Hook Strap Uni HBU 20-24
Internal Corner Waler IRZ 75/75
Ladder 240-360
Lag Screw DIN 571 8 x 60, galv.
Nut ISO 4032 M 8-8, galv.
Magnetic Holder for SCU
Offset Coupling VVKZ 3/99
Outside Corner Coupling AKZ 85/85
133
153
141
140
140
140
138
138
137
137
137
142
142
143
150
140
140
140
147
147
153
142
143
139
146
146
146
146
134
134
134
138
152
152
138
133
149
139
145
135
149
136
136
136
143
143
136
144
144
149
151
148
145
136
136
137
137
137
137
134
152
138
138
136
138
139
140
701991
105480
105484
105823
100813
101273
101269
103203
102415
102920
105986
105985
072210
101404
101319
101318
101311
101464
025200
025210
025220
025230
025240
025250
024640
072180
027110
071218
071219
103844
072170
010600
010030
010610
010060
010070
010050
010120
010080
010150
010090
103868
103871
103874
103877
103886
103889
103898
103892
103929
103903
103906
103915
103918
103922
103925
103928
103943
010440
010420
057050
024210
024470
110272
024690
022340
022350
Plate Fl 50 x 20 x 120, ESP
Platform Beam VARIO, left
Platform Beam VARIO, right
Platform Bracket VARIO VBK 90
Platform Guardrail 80
Platform Strut 167 VARIO
Platform VARIO 100/100
Platform VARIO 100/125 with Hatch
Platform VARIO 100/187.5
Power-Screwdriver SCU 7-9
Protection Board 100
Protection Board 187.5
Protection Board IE 75/75
Quick Release Corner SSE 1,0 m
Quick Release Corner SSE Spec. Leng
Quick Str. Hook Strap 24-100/140, galv.
Ratchet Wrench 1/2"
Scaffold Bracket GB 80
Screw Change HB, incl. Screws
Screw Change HBU, HBUD
Sleeve HBU/HBUD, galv.
Socket SW 13-1/2" l = 80 mm
Steel Waler SRZ U-100 l = 0.95m
Steel Waler SRZ U-100 l = 2,45 m
Steel Waler SRZ U-100 Spec. Length
Steel Waler Universal SRU U-120 l = 0.72 m
Steel Waler VSRZ-24 U-100 l = 1.20/12
Suspension Tube Vario 53
Tie Yoke SKZ
TSS-Torx 6 x 60, galv.
TSS-Torx 6 x 60, ZKS, galv.
Tunnel Frame Wale RKR U 160
153
151
151
151
150
150
150
148
148
148
148
148
138
131
130
129
128
132
144
144
144
144
144
144
136
139
147
136
137
137
139
133
133
133
133
133
133
133
133
133
133
135
135
135
135
135
135
135
135
135
135
135
135
135
135
135
135
135
134
134
147
142
137
137
137
152
152
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
152
152
152
141
141
141
139
139
139
132
132
132
132
132
131
131
131
131
131
131
131
130
130
130
130
130
130
130
129
129
129
129
129
129
129
128
128
128
128
128
128
128
145
143
143
134
152
134
134
Tunnel Frame Wale RKR U100
Universal Coupling UK 70
VARIO Alignment Clamp VRS
VARIO Coupling Concrete Finish VKS 99
VARIO Coupling VKZ 147
VARIO Coupling VKZ Spec. Length
VARIO Internal Edge S 75/75 x 240
VARIO Standard Panel S 100 x 240
VARIO Standard Panel S 187,5 x 240
Wedge Headpiece, compl.
Wedge K, galv.
Wedge KZ, galv.
Welding Unit for KRZ
Welding Unit for RKR
Welding Unit for VSRZ
Welding Unit for VSRZ/12
127
Service
022310
022320
022330
103737
102945
102825
013020
013030
013080
101471
101470
101469
101467
101465
101411
101410
101409
101408
101407
101406
101405
101255
101256
101257
101258
101259
101260
101261
101248
101249
101250
101251
101252
101253
101254
101241
101242
101243
101244
101245
101246
101247
028060
024250
024240
010400
022460
010500
010490
101241
101242
101243
101244
101245
101246
101247
314,000
375,000
480,000
586,000
635,000
742,000
791,000
VARIO Standard Panels S b = 2.50 m
Pre-assembled panels with 21 mm plywood. With
Slip Boards, Cover Board and Crane Eye 24.
.
.
2500
350
350
350
350
350
297
600
78
240
21
297
Note
Panel = 2.40 m, without Cover Board and Crane
Eye 24.
Technical Data
Permissible fresh concrete pressure 60 kN/m2.
Safety Instructions
Load-bearing point capacity 0.7t with a crane sling
angle ≤ 15°.
540
625
1250
625
100
1184
1184
Slab Formwork
480
Shoring Systems
420
1184
1184
1184
360
1184
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
Service
101311
6,170
1184
5358
1184
1184
4174
1184
459
1184
459
1184
1184
459
459
1184
459
2990
1776
459
2398
As top covering for VARIO GT 24 standard panels.
248
Bridge- and
Tunnel Formwork
459
1184
Working Platforms
3582
1184
1184
240
4766
Climbing Systems
5950
300
2500
128
21
235,000
282,000
361,000
440,000
477,000
557,000
594,000
.
.
1875
319,5
360
360
319,5
600
78
240
21
360
Note
Eye 24.
Technical Data
Safety Instructions
angle ≤ 15°.
Column Formwork
101248
101249
101250
101251
101252
101253
101254
625
625
100
540
625
Formwork Girders
Item no. Weight kg
Wall Formwork
Slab Formwork
1184
1184
480
Shoring Systems
420
1184
1184
1184
1184
360
Climbing Systems
1184
Working Platforms
Bridge- and
Tunnel Formwork
1184
459
1184
459
1184
1184
459
459
1184
459
2990
1776
2398
248
4,470
1875
21
129
Service
1184
1184
1184
1184
101318
459
459
1184
3582
4174
240
4766
5358
5950
300
101255
101256
101257
101258
101259
101260
101261
162,000
208,000
265,000
322,000
350,000
407,000
435,000
.
.
1248
320
297
600
77
240
21
297 180
Note
Eye 24.
Technical Data
Safety Instructions
angle ≤ 15°.
540
624
100
624
1184
1184
Slab Formwork
480
Shoring Systems
420
1184
1184
1184
360
1184
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
Service
1184
5358
1184
1184
1184
1184
101319
2,860
1184
459
1184
459
1184
1184
459
459
1184
459
2990
1776
459
2398
248
Bridge- and
Tunnel Formwork
459
1184
Working Platforms
3582
4174
240
4766
Climbing Systems
5950
300
1248
130
21
137,000
168,000
213,000
258,000
281,000
326,000
349,000
.
.
998
250
297
600
77
240
21
297
Note
Eye 24.
Technical Data
Safety Instructions
angle ≤ 15°.
Column Formwork
101411
101410
101409
101408
101407
101406
101405
Formwork Girders
Item no. Weight kg
Wall Formwork
100
540
Slab Formwork
1184
1184
480
Shoring Systems
420
1184
1184
1184
1184
360
Climbing Systems
1184
Working Platforms
1184
Bridge- and
Tunnel Formwork
459
1184
459
1184
1184
459
459
1184
459
2990
1776
2398
248
2,230
998
21
131
Service
1184
1184
1184
1184
101404
459
459
1184
3582
4174
240
4766
5358
5950
300
Formwork Girders
Wall Formwork
Item no. Weight kg
101471
101470
101469
101467
101465
211,000
251,000
325,000
429,000
534,000
VARIO Internal Edges S 75/75
.
Note
Eye 24.
Technical Data
Safety Instructions
angle ≤ 15°.
.
750
301
78
600
750
262
76
100
240
21
Column Formwork
310
1184
Slab Formwork
480
1184
1184
Shoring Systems
360
5950
300
4,730
1184
4766
1184
459
459
459
1184
1184
2990
1776
459
2398
750
101464
400
Bridge- and
Tunnel Formwork
459
1184
Working Platforms
3582
1184
1184
Climbing Systems
240
Service
750
132
21
19,800
25,100
30,400
38,300
40,900
51,600
61,500
Steel Waler SRZ U100
Steel waler for VARIO GT 24 panels and special
applications.
L
950
1200
1450
1825
1950
2450
2950
Note
Special lengths and other profile sizes on request.
Technical Data
Wy = 82.4 cm³, ly = 412 cm4
L
Formwork Girders
010600
010030
010610
010060
010070
010050
010120
Wall Formwork
Item no. Weight kg
Column Formwork
93
205
25
40
Slab Formwork
135
20
170
53
30
X x 60
Ø6
100
60
Shoring Systems
Ø9
52
Working Platforms
Bridge- and
Tunnel Formwork
140
U140
0,376
U120
End Plate SRZ
For Steel waler SRZ with special lengths.
150
5
Ø9
Ø6,3
133
Service
U100
710001
60 52 60
55 52 55
50 52 50
100
.
Technical Data
Wy = 82.4 cm³, ly = 412 cm4
120
Steel Waler SRZ Spec. Length
60
22,000
28,000
33,000
0,000
6
010080
010150
010090
010350
Climbing Systems
152
Item no. Weight kg
010440
010420
010490
010500
32,100
58,800
0,000
0,000
Wall Formwork
Steel Waler VSRZ
Steel waler for VARIO GT 24 corner panels and
special applications.
Note
Technical Data
Wy = 82.4 cm³, ly = 412 cm4
93
236
236
Formwork Girders
120
1200 / 2450
010200
42,300
Steel waler for VARIO GT 24 corner element
75 x 75 cm. Allows easy striking.
Shoring Systems
Note
Special lengths and other profiles on request.
Technical Data
Wy = 82.4 cm³, ly = 412 cm4
10
130
38
Ø9
300
727
Climbing Systems
100
236
301
236
024240
0,805
010180
010270
010190
010400
22,000
28,000
33,000
0,000
52
Accessories
Wedge KZ, galv.
Cross Waler KRZ Spec. Length
Steel waler for VARIO GT 24 panels for narrow lift
shafts.
Note
When ordering, state dimensions X and Y.
Technical Data
Wy = 82.4 cm³, ly = 412 cm4
236
L2
93
Bridge- and
Tunnel Formwork
Working Platforms
152
715
70
93
236
L1
Service
52
38
Slab Formwork
Column Formwork
Ø9
134
52
Formwork Girders
Item no. Weight kg
Wall Formwork
L
722
972
1222
1472
1722
1972
2222
2472
2722
2972
3472
3972
4472
4972
5472
5972
4972
Technical Data
SRU 120 Wy = 121,4 cm³, Iy = 728 cm4
SRU 140 Wy = 172,8 cm³, Iy = 1210 cm4
Column Formwork
Steel Walers Universal SRU
Universal steel waler profile U 120 and U 140 used
as waling for girder wall formwork and for diverse
special applications. With adjustable spacers.
Slab Formwork
18,100
24,200
30,900
38,100
44,700
52,000
58,600
65,600
72,000
81,000
92,600
106,000
119,000
135,000
146,000
159,000
157,000
L
Shoring Systems
7 x 60
37,5 52,5
51
125
125
198,5
125
125
3 x 65
112
19
Climbing Systems
48,5
17
52
162
Bridge- and
Tunnel Formwork
Complete with
4 pc. 104024 Nut ISO 7040 M16-8, galv.
4 pc. 710880 Washer DIN 434, M18, galv.
Technical Data
Wy = 121.4 cm³, Iy = 728 cm4
53
For assembly on Steel Waler SRU.
120
7,610
172
65
104027
140
52
X
Working Platforms
70
120
36
M 16
236
52
162
135
Service
103868
103871
103874
103877
103886
103889
103898
103892
103929
103903
103906
103915
103918
103922
103925
103928
103943
Item no. Weight kg
024070
0,460
For fixing GT 24 girders to Steel Waler SRZ and
SRU Profile U100 - U120.
Wall Formwork
Formwork Girders
Note
Non-weldable!
Take official approval into consideration!
Technical Data
M 8x70
Column Formwork
152 (U 100)
82
162 (U 120)
024080
0,676
172 (U 140)
071218
024140
710240
024090
0,000
0,033
0,050
0,005
024600
0,907
For mounting the GT 24 edge girder on the Steel
Waler SRZ and SRU Profile U100 - U120.
154
M 8x100
152 (U 100)
024630
0,742
For fixing the GT 24 girder in the VARIO corner.
M 8x100
152 (U 100)
113
162 (U 120)
024640
0,923
For fixing GT 24 girders to Steel Waler SRZ, SRU,
Profile U100 - U140 outside of the girder nodes.
Safety Instructions
Girders fixed in position with the Quick Strap must
be specially screwed to the formlining when using
crane lifting gear.
99
152
162 (U 120)
Bridge- and
Tunnel Formwork
Working Platforms
Accessories Hook Straps HB
90
Service
82
182 (U 160)
Climbing Systems
Shoring Systems
Slab Formwork
M 8x70
136
56
Item no. Weight kg
Wall Formwork
Note
The girders can be mounted at right-angles or diagonally to the steel walers and also outside of the
nodes.
Column Formwork
82
152 (U 100)
162 (U 120)
172 (U 140)
0,887
0,912
Hook Straps Uni Double HBUD
For fixing two GT 24 girders or VT 20K girders to
SRZ steel walers and SRU Profiles U100 - U140.
Note
The girders can be mounted at right-angles or diagonally to the steel walers and also outside of the
nodes.
160
Shoring Systems
min 200
min 240
max 240
max 280
104930
104096
152 (U 100)
162 (U 120)
172 (U 140)
0,008
0,010
Climbing Systems
024470
024690
Accessories Hook Straps HBU, HBUD
Bolt ISO 4014 M8 x 150-8.8, galv.
Bolt ISO 4014 M8 x 180-8.8, galv.
Bolt ISO 4014 M8 x 190-8.8, galv.
Working Platforms
0,000
0,050
0,060
0,060
0,013
TSS-Torx, galv.
For Torx Blade TX 30. Self-drilling.
Bridge- and
Tunnel Formwork
071219
104929
107185
103518
103844
60 / 80
0,006
TX 30
110272
Slab Formwork
Hook Straps Uni HBU
For fixing two GT 24 girders or VT 20K girders to
SRZ steel walers and SRU Profiles U100 - U140.
60
TX 30
137
Service
0,865
0,893
min 220 max 240
min 240 max 280
104931
103845
Formwork Girders
Item no. Weight kg
024270
024260
0,023
0,027
Lag Screws DIN 571, galv.
Note
Wrench size SW 13.
Column Formwork
Wall Formwork
Formwork Girders
60 / 80
SW 13
072210
1,600
Universal power screwdriver with adjustable coupler, continuous electronic speed control and clockwise/anti-clockwise rotation.
Technical Data
Voltage 230 V 50-60 Hz.
Power consumption 400 W.
Max. tightening moment 28 Nm.
072220
072230
072240
072140
0,400
0,425
0,110
0,005
Accessories
Magnetic Holder for SCU 7-9
Bit Point TX 30
072220
072230
072240
072140
0,400
0,425
0,110
0,005
Accessories for Power-Screwdriver SCU 7-9
Bit Point TX 30
072150
2,860
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
.
Technical Data
.
Service
Lightweight electric power wrench for momentfree working, with clockwise/anti-clockwise rotation. With 1/2” square drive.
138
Formwork Girders
0,100
Column Formwork
072170
Wall Formwork
.
072180
0,560
Slab Formwork
SW 13
Ratchet Wrench 1/2"
Climbing Systems
Couplings VKZ
Coupling VKZ 99
For continuously variable tight (tension and compression) connection of SRZ and SRU steel walers
or for filler plates.
L
990
1470
2110
Working Platforms
9,000
13,300
19,100
9,000
Technical Data
Wy = 17.1 cm³, ly = 68.3 cm4
80
Bridge- and
Tunnel Formwork
44
013010
013020
013030
013080
Shoring Systems
300
30
Technical Data
Wy = 17.1 cm³, ly = 68.3 cm4
12
For connecting extended and non-extended
VARIO elements above the extension.
30
7,110
80
101395
L
990
139
Service
Item no. Weight kg
072160
0,340
Item no. Weight kg
013140
013130
013180
11,900
13,300
9,000
Corner Couplings EKZ
For continuously variable tight (tension and
compression) connection of SRZ and SRU steel
walers.
429 / 765
80
Column Formwork
948 / 765
103850
24,700
For providing tensile and compression-proof connections of Steel Walers SRZ and SRU on external
corners.
120
44
Shoring Systems
Slab Formwork
Technical Data
Wy = 17.1 cm³, Iy = 68.3 cm4
44
Wall Formwork
Formwork Girders
Articulated Couplings GKZ
For continuously variable tight (tension and compression) connection of SRZ and SRU steel walers
with oblique angles more than 48°.
Technical Data
Wy = 17.1 cm³, ly = 68.3 cm4
640 / 790
483 / 690
80
Service
11,500
14,400
9,000
44
013220
013210
013230
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
845
845
600 / 760
140
600 / 760
Formwork Girders
Wall Formwork
For connecting VARIO GT 24 panels. Allows compensation of up to max. 5 mm panel offsets.
80
44
Item no. Weight kg
102825
8,700
103054
11,300
Accessories
For connecting VARIO GT 24 panels. Allows compensation of up to max. 5 mm panel offsets.
483
80
640
Slab Formwork
2,070
44
102945
Column Formwork
990
102945
2,070
Accessories
In connection with Coupling VKS 99 or Articulated
Coupling GKS 60/60. For compensating maximum
5 mm element offset.
Complete with
1 pc. 030370 Wingnut Pivot Plate DW 15, galv.
Climbing Systems
2,070
Working Platforms
117
102945
600
Shoring Systems
600
247
For a rigid connection of Steel waler SRU and for
connecting Heavy-Duty Spindles SLS.
125
685
104031
018060
0,462
0,030
48
210
21
187,5 62,5
Bridge- and
Tunnel Formwork
62,5 187,5
50
10,800
Accessories
Bolt Ø 21 x 120
141
Service
103737
Formwork Girders
Item no. Weight kg
104031
0,462
Bolt Ø 21 x 120
For different connections.
207
Ø21
018060
0,030
018060
0,030
Accessories
For pins up to Ø 25 mm.
Ø4
2,180
Tie Yoke SKZ
For tensioning on external corners with Steel
Waler SRZ, SRU, U100 - U140 and VARIO couplings.
146
024210
161
Bulkhead Tie
For assembling stopend formwork with VARIO
GT 24.
Ø18
Technical Data
390
80
DW 15
Service
2,100
48
8
013240
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
122
Ø6
142
Formwork Girders
Wedge KZ, galv.
For connecting panels with VARIO Couplings or Tie
Yoke SKZ.
Wall Formwork
47
Item no. Weight kg
024240
0,805
20
254
For mounting girders to VARIO Couplings in infill
areas.
Column Formwork
1,230
120
024220
12
0,331
Slab Formwork
Wedge K, galv.
For Coupling Compression Plate KDP, Wedge Head
Piece SRZ/SRU and Waler Connector SB-A,B,C.
Ø8
35
024250
107
128
Shoring Systems
90
Climbing Systems
15
0,500
1,230
Formwork Joints
Plastic profile strip for easier striking of shafts.
2500 / 3000
34/65
22
030260
101706
Bridge- and
Tunnel Formwork
20
15
2500
Working Platforms
Plastic chamfer strip.
max 20
max 40
143
0,470
Service
031200
8
20
208
025200
025210
025220
025230
025240
025250
32,200
70,000
105,000
140,000
180,000
35,000
Quick Release Corners SSE
For easier striking of shaft internal formwork. We
recommend removing the shaft corner immediately after concreting.
L
1000
2000
3000
4000
5000
Note
Formlining size is 15 cm shorter than the dimension of the concrete.
150
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
Shoring Systems
Slab Formwork
235
L
235
028050
4,550
to GT 24 girders
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
145
For connecting push-pull props and kicker braces to extended GT 24 girders in the area of the
Extension Splice 24-2.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
145
40
170
min 52
max 100
14
Service
4,680
40 min 40
170
028070
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
14
144
Formwork Girders
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
48
100
14
24
U100
U120
Wall Formwork
to Steel Waler SRZ and SRU Profile U100 - U140.
82
Item no. Weight kg
028060
1,910
027590
2,400
Accessories
Wedge K, galv.
For fixing Brace Frame SB-1 and SB-2 to Steel
Note
Wrench size SW 22.
SW 22
M 14
152 (U 100)
Slab Formwork
0,331
Shoring Systems
150
162 (U 120)
172 (U 140)
626
Climbing Systems
Complete with
2 pc. 030190 Three Wingnut DW 15, galv.
Note
Working Platforms
850
Bridge- and
Tunnel Formwork
For extending GT 24 girders and VARIO GT 24 elements up to max. height of 8.00 m.
28
7,040
121
024480
145
Service
024250
Column Formwork
U140
Item no. Weight kg
070760
4,650
Crane Splice GT 24
For transporting elements by crane with the GT 24
Girder.
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
Note
Safety Instructions
Load-carrying capacity with crane sling angle ≤ 15°
0.7 t.
Ø16x65/86
635
Column Formwork
Wall Formwork
021990
021980
2,780
2,780
Crane Eyes 24
Crane Eye 24, right
Crane Eye 24, left
Girder. Mounted securely to the element.
30
Complete with
4 pc. 780356 Nut ISO 7042 M10-8, galv.
4 pc. 710139 Washer R11 DIN 440, galv.
Note
Illustration shows the Crane Eye 24, left.
Safety Instructions
0.7 t.
180
90 90
228
111238
Girder. Adjustable from 23 to 41 cm.
Complete with
8 pc. 780356 Nut ISO 7042 M10-8, galv.
Note
Only use with compression bar.
Safety Instructions
Load-carrying capacity 2.0 t with
crane sling angle ≤ 30° .
160
80
19,800
M 10x110
min 230 max 410
660
Service
448
Climbing Systems
20
Bridge- and
Tunnel Formwork
Working Platforms
25
55
Shoring Systems
Slab Formwork
117
393
Formwork Girders
146
230
Formwork Girders
Item no. Weight kg
057050
4,450
For attaching VARIO GT 24 elements.
Complete with
2 pc. 710234 Nut ISO 4032 M10-8, galv.
15
4 x 25
300
4 x 25
Column Formwork
Slab Formwork
Technical Data
Permissible load 150 kg/m2 with a maximum width
35
1050
460
65
899
757
Shoring Systems
66
Ø7
600
85
180
120
Note
Illustration shows the Corner Scaffold Bracket EGB
24-80 R.
Technical Data
35
1050
Bridge- and
Tunnel Formwork
460
1274
600
Corner Scaffold Brackets EGB
For assembling a working scaffold to panels with
GT 24 girders. With securing bolts.
85
9
14,100
14,000
72
027060
027070
Climbing Systems
with VARIO GT 24.
Working Platforms
11,000
Accessories
Tie rod B 20 spec. length
Hex. Nut DW 20 SW 36/60, weld.
Ø7
147
Service
027110
Ø 60 ,3
120
2,600
0,371
15
265
265
030745
030580
M 10x80
Ø25
Wall Formwork
530
Ø11
Item no. Weight kg
112159
2,130
For assembling a guardrail on VARIO GT 24 elements.
Complete with
1 pc. 024250 Wedge K, galv.
1 pc. 780800 Sleeve ISO 8752 8 x 20, galv.
45
70 45
Wall Formwork
402
8,51°
400
Formwork Girders
Column Formwork
115
156,000
98,800
Platforms VARIO with Hatch
Pre-assembled working platform for VARIO GT 24
panels, with access hatch.
L
2480
1230
Technical Data
Shoring Systems
1165
Slab Formwork
105985
102415
117
105986
102920
103203
Service
155,000
115,000
84,900
Platforms VARIO without Hatch
panels, with access hatch.
1299
L
2480
1855
980
Complete with
1 pc. 101269 Platform Strut 246 VARIO
1 pc. 101269 Platform Strut 246 VARIO
1 pc. 072170 Socket SW 13-1/2" l = 80 mm
1 pc. 072160 Extension 1/2" l = 250 mm
1 pc. 013010 Coupling VKZ 99
Technical Data
1165
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
L
L
148
1299
Formwork Girders
Technical Data
Wall Formwork
End Platform VARIO
stopend formwork. 2 pieces per set of stopend
formwork and platform level.
1020
103992
65,600
Accessories
Pre-assembled working platform for VARIO GT
24 elements. Connecting platform with pivotmounted end handrail. For external corners from
80° to 100°.
Technical Data
Slab Formwork
22,000
275
Climbing Systems
850
Shoring Systems
1044
103865
Column Formwork
986
Item no. Weight kg
103932
36,300
Bridge- and
Tunnel Formwork
For assembly on VARIO end platform with wall
thicknesses up to 0.50 m. With foldable VARIO
Platform Handrail 80.
140
1290
149
Service
22,000
1288
103865
Working Platforms
2125
Formwork Girders
Item no. Weight kg
100813
4,980
End handrail for various platforms. Pivot-mounted.
Complete with
2 pc. 102414 Bolt Ø 12 x 105 x 5 x 95-ST, galv.
420
Wall Formwork
810
Column Formwork
880
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
80
min 60
max 76
Shoring Systems
Climbing Systems
101273
101269
7,780
11,200
Platform Struts VARIO
For assembling VARIO platforms. 2 pieces per
platform.
Working Platforms
1576 / 2368
Bridge- and
Tunnel Formwork
1726 / 2518
150
41
Complete with
2 pc. 018050 Bolt Ø 16 x 65/86, galv.
65 30
Service
14
82
208
148
For connecting the VARIO platforms and platform
struts to GT 24 girders.
50
4,050
Slab Formwork
100541
Formwork Girders
on elements with GT 24 girders. With safety pins
and cotter pins.
Complete with
1 pc. 106336 Bolt Ø 20 x 120, galv.
Technical Data
Permissible load 150 kg/m2 with a maximum
width of influence 1.25 m.
Wall Formwork
Item no. Weight kg
105823
9,270
1042
Column Formwork
890
745
68
180
85
Ø6
Slab Formwork
Ø7
Platform Beams VARIO
For assembling VARIO GT 24 filler platforms with
bolted boarding.
Note
Illustration shows the VARIO Platform Beam, left.
Bridge- and
Tunnel Formwork
120
Guardrail Post HSGP
35
1050
65
1300
440
3,520
Working Platforms
175
1299
034580
Shoring Systems
16,600
16,600
Climbing Systems
105480
105484
Accessories
Guardrail Post HSGP
151
Service
3,520
269
034580
Item no. Weight kg
107738
24,100
Ladder 240-360
Adjustable from 2.40 m to 3.60 m.
Wall Formwork
422
Formwork Girders
N x 300
max 3710
022380
022440
23,200
20,500
Double Spindles RKR
Note
When ordering, please use a copy of the respective version whilst specifying the dimensions. For
the wall walers, the VARIO Extension (l= 236 mm)
must always be added when determining the total
length. Welded joints RKR (1 per wall waler) are to
be featured separately.
55 52 55
U100
U120
U140
U160
U180
Complete with
1 pc. 710229 Nut ISO 4032 M16-8, galv.
Technical Data
Bearing capacity of the double spindle 102.5 kN
with x = 170 mm. Bearing capacity of the roller
6.0 kN.
Bridge- and
Tunnel Formwork
368
710
Service
38
52
508
152
70 52 70
180
65 52 65
160
50 52 50
60 52 60
140
.
Climbing Systems
Working Platforms
Tunnel Frame Wales RKR
120
22,000
28,000
33,000
40,000
45,000
0,000
100
022310
022320
022330
022340
022350
022460
Shoring Systems
Slab Formwork
Column Formwork
min 2360
140
Formwork Girders
Item no. Weight kg
022400
12,300
For aligning RKR culvert frame formwork. Do not
use for transferring loads.
Complete with
2 pc. 725560 Bolt Ø 25 x 100
Wall Formwork
L
520
520
19,600
Corner Spindle RKR
Complete with
10 pc. 710229 Nut ISO 4032 M16-8, galv.
Technical Data
Permissible load F 90.0 kN.
Climbing Systems
0,906
120
Ø17
20
Working Platforms
701991
Bridge- and
Tunnel Formwork
Accessories
0,906
153
Service
701991
150
50
493
Shoring Systems
292
022410
Slab Formwork
Column Formwork
Ø25x100
Service
154
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
161
161
161
161
163
163
162
162
162
159
159
159
159
159
159
157
157
157
157
157
157
160
160
160
160
158
158
158
158
158
158
156
156
156
156
156
156
160
160
160
160
163
163
163
163
162
Adjusting Spindle 210, galv.
Alignment Coupler 38, galv.
Crane Eye 24, left
Crane Eye 24, right
Crane Splice GT 24
Distribution Waler
Inside Panel I 123 x 120
Inside Panel I 123/120 2R
Inside Panel I 240 x 120 2R
Outside Panel A 128 x 120
Outside Panel A 128 x 120 2R
Ratchet Spanner SW 24 "Combi"
Template for RUNDFLEX A250, I240, A128, I123
Template for RUNDFLEX A85, I72
Waler Bolt for RUNDFLEX, galv.
155
Service
021610
021620
023940
023500
021980
021990
070760
021630
024480
021930
021950
021430
021970
021910
102853
021830
102855
021850
021410
021890
021810
020830
020850
020870
020890
021920
102854
021940
021420
021960
021900
021820
102856
021840
021400
021880
021800
020820
020840
020860
020880
021790
027110
099540
098217
021640
Formwork Girders
Item no. Weight kg
021800
021820
102856
021840
021400
021880
Column Formwork
Wall Formwork
126,000
181,000
241,000
339,000
419,000
508,000
Note
Element without distribution waler.
Panel complete with crane eye on left and right.
Technical Data
Minimum radius 4.0 m. Plywood 21 mm.
Outside Panels A 250
Ready-to-use formwork panel for circular
structures.
.
625
220 230
335
380
610
1250
230
380
610
.
625
230
380
610
230 220
335
620
460
25
27
25
296
1218
25
1184
27
460
Working Platforms
156
1184
460
27
2402
460
27
1184
3586
Bridge- and
Tunnel Formwork
Service
2994
1776
1218
27
Climbing Systems
460
296
25
50
Shoring Systems
47 442
25
Slab Formwork
2500
Note
Technical Data
Inside Panels I 240
structures.
.
Column Formwork
.
2400
324
230 209
Shoring Systems
620
2994
1776
1218
Climbing Systems
Working Platforms
25
27
25
460
27
460
Bridge- and
Tunnel Formwork
1184
3586
460
27
1184
157
Service
296
25
50
47 442
25
Slab Formwork
600
296
354
1218
1200
584
230
460
354
27
584
230
25
354
2402
600
584
1184
324
209 230
460
122,000
168,000
227,000
331,000
416,000
510,000
27
021810
021830
102855
021850
021410
021890
Formwork Girders
Item no. Weight kg
Wall Formwork
Formwork Girders
Item no. Weight kg
021900
021920
102854
021940
021420
021960
Column Formwork
Wall Formwork
71,600
98,200
127,000
200,000
248,000
298,000
Outside Panels A 128
structures.
640
220 230
335
.
380
610
Note
Technical Data
.
640
230 220
335
620
460
25
27
25
296
1218
25
1184
27
460
Working Platforms
158
1184
460
27
2402
460
27
1184
3586
Bridge- and
Tunnel Formwork
Service
2994
1776
1218
27
Climbing Systems
460
296
25
50
Shoring Systems
47 442
25
Slab Formwork
1280
Inside Panels I 123
structures.
.
Column Formwork
.
Note
Technical Data
1232
584
324
230 209
Shoring Systems
620
2994
1776
1218
Climbing Systems
27
Working Platforms
25
1218
Bridge- and
Tunnel Formwork
159
Service
460
27
1184
3586
25
1184
27
460
296
25
460
27
460
296
25
50
47 442
25
Slab Formwork
616
2402
616
354
1184
324
209 230
460
73,100
97,100
126,000
190,000
239,000
283,000
27
021910
021930
102853
021950
021430
021970
Formwork Girders
Item no. Weight kg
Wall Formwork
90,400
135,000
174,000
211,000
73,400
115,000
152,000
171,000
Outside Panels A 85, Inside Panels I 72
structures.
.
425
250
Technical Data
Minimum radius 1.0 m. Plywood 2 x 9 mm.
.
425
350
25
020820
020840
020860
020880
020830
020850
020870
020890
250
1776
722
Shoring Systems
241 240 241
361
27
25
296
460
1184
27
25
160
460
27
2402
460
27
1184
3586
Working Platforms
Bridge- and
Tunnel Formwork
Service
1218
Climbing Systems
25
460
361
2994
Slab Formwork
850
1184
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
Formwork Girders
Technical Data
61
164
max 220
Wall Formwork
Item no. Weight kg
023500
4,350
288
Column Formwork
259
6,080
For element connections with RUNDFLEX.
Note
Compensation up to 26 cm.
Technical Data
Slab Formwork
023940
Shoring Systems
164
max 380
434
3,770
For aligning RUNDFLEX external elements. For
panel joints of external and internal elements.
Complete with
Note
With self-cleaning hexagonal thread.
Wrench size SW 24
Climbing Systems
021620
500
125
Ø35
Complete with
Note
With self-cleaning hexagonal thread.
Wrench size SW 24
For aligning RUNDFLEX internal elements and the
edge profiles on external and internal elements.
250
SW 24
Ø35
min 70
max 210
161
Service
2,830
125
021610
max 460
Bridge- and
Tunnel Formwork
min 220
Working Platforms
SW 24
100
Distribution Waler
For transferring anchor forces on two adjacently
positioned T-walers.
45
690
145
770
021640
1,260
021640
1,260
Accessories
For fixing the distribution waler on the T-Waler.
Complete with
Ø 40
150
Slab Formwork
Column Formwork
590
200
Item no. Weight kg
021630
18,400
Wall Formwork
Formwork Girders
7,040
For extending GT 24 girders and VARIO GT 24 elements up to max. height of 8.00 m.
Complete with
Note
121
850
070760
4,650
Crane Splice GT 24
Girder.
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
Note
Safety Instructions
0.7 t.
Ø16x65/86
635
Bridge- and
Tunnel Formwork
Working Platforms
626
117
Service
28
024480
Climbing Systems
Shoring Systems
Ø35
162
25
30
180
393
90 90
20
228
11,000
with VARIO GT 24.
Technical Data
35
1050
460
65
Shoring Systems
120
027110
M 10x110
899
757
Climbing Systems
66
Ø7
1,000
For adjusting RUNDFLEX elements and
Cantilevered Parapet Platform GKB.
Working Platforms
180
600
85
021790
Note
Wrench size SW 24.
Length approx. 500 mm.
0,000
0,000
Template for RUNDFLEX
Template for RUNDFLEX A250, I240, A128, I123
The template is used for external and internal
elements.
Bridge- and
Tunnel Formwork
.
099540
098217
Slab Formwork
Column Formwork
Complete with
4 pc. 780356 Nut ISO 7042 M10-8, galv.
4 pc. 710139 Washer R11 DIN 440, galv.
Note
Illustration shows the Crane Eye 24, left.
Safety Instructions
0.7 t.
Note
Including material (formlining). Produced in accordance with project requirements.
Crane Eyes 24
Crane Eye 24, right
Crane Eye 24, left
Girder. Mounted securely to the element.
.
163
Service
2,780
2,780
55
021990
021980
Formwork Girders
Item no. Weight kg
Wall Formwork
Service
164
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
167
167
166
166
166
166
166
167
168
168
168
167
167
167
166
Adjusting Bolt STS 260, galv.
Articulated Spindle Waler GSRV 65-90
Articulated Waler GRV 30
GRV Bearing Block, left
GRV Bearing Block, right
GRV Spindle Connector
Half Round Washer HRS, galv.
Hook Spanner HKS for GRV
Nut ISO 4032 M24-8, galv.
Pin for GRV, galv.
165
Service
021240
021250
021150
021140
021130
021120
021110
022230
021270
021280
021290
021260
021160
022250
022210
Item no. Weight kg
021140
021130
021120
021110
17,600
23,900
27,100
30,200
Wall Formwork
Formwork Girders
Articulated Waler GRV
For tie-less forming of circular structures with
closed formwork ring. Continuously adjustable to
suit all radii.
L
X
380
300
680
600
830
750
980
900
Technical Data
Permissible compressive and tension force
300 kN.
Column Formwork
L
X
Ø40
021150
49,200
For forming circular structures without ties by
means of a completely closed circular formwork
construction. For compensations, adjustable from
65 to 90 cm.
82
70
Technical Data
Permissible compressive and tension force
300 kN.
Shoring Systems
Slab Formwork
152
Ø21
min 730
max 980
min 650
max 900
Working Platforms
022210
1,900
82
70
140
Climbing Systems
Ø40
Pin for GRB, galv.
For connecting the Articulated Waler GRV and
Articulated Adjustable Waler GSRV 65-90.
Service
Bridge- and
Tunnel Formwork
200
145
Ø6
022230
166
0,033
Accessories
Ø40
Formwork Girders
Item no. Weight kg
022230
0,033
For pins Ø 25 mm to Ø 40 mm.
Wall Formwork
Ø5
For adjusting the Articulated Adjustable Waler
GSRV 65-90.
Column Formwork
2,450
40
105
021160
385
Adjusting Bolt STS
For adjusting Articulated Waler GRV and
Slab Formwork
0,907
1,260
Note
Wrench size SW 17.
Shoring Systems
021240
021250
18
260 / 360
SW 17
022250
021260
0,100
0,178
Accessories
022250
0,100
Working Platforms
Climbing Systems
M 24
Note
Wrench size SW 36.
M 24
Ø26
16
58
167
Service
0,178
44
021260
Bridge- and
Tunnel Formwork
SW 36
Item no. Weight kg
021270
15,000
For using the Articulated Waler GRV for special
applications.
70
150
210
Ø40
Wall Formwork
Formwork Girders
021280
15,100
200
applications.
Slab Formwork
82
150
Ø40
210
Column Formwork
200
200
Shoring Systems
200
Climbing Systems
021290
applications.
190
100
Ø21
Bridge- and
Tunnel Formwork
100
168
90
190
100
Working Platforms
60 50
Ø22
Service
4,880
Service
169
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
170
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
FTF Facade Formwork
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
176
174
174
176
176
174
176
172
175
172
175
177
177
173
173
177
177
173
173
175
175
176
176
176
176
176
176
176
Base Plate-2 for RSS
Cable 2-Strands Ø = 10 mm, l = 4.0m
Crane Eye A18
Cutting Cost Scaffold Tube
FTF 500 Bracket
FTF Assembly Device
FTF Bracket w. Spindle
FTF Clamp
FTF End Guardrail, compl.
FTF Platform 180 x 60
FTF Spindle Guide
FTF Spindle Guide w. Spindle
FTF Tie plate DW 15, compl.
FTF Tie unit 65, compl.
FTF Waling Coupling w. RS-Adaptor
FTF Waling Coupling w/o RS-Adaptor
FTF Wrench SW 38/1500
Push-Pull Prop RSS II
Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m
Scaff. Tube Steel Ø 48,3 x 3,2, per m
171
Service
106000
105822
105905
027070
027060
723910
026417
103981
104195
103949
104744
104018
103946
103945
104070
103942
104017
103944
104083
104803
028020
026411
026412
026413
026414
026419
026418
026415
Item no. Weight kg
103981 314,000
FTF 500 Bracket
Pre-assembled bracket.
Complete with
1 pc. 104070 FTF Spindle Guide w. Spindle
2 pc. 103945 FTF Spindle Guide
2 pc. 104083 FTF Waling Coupling w/o RS-Adaptor
1 pc. 103944 FTF Waling Coupling w. RS-Adaptor
2 pc. 103949 FTF Bracket w. Spindle
1 pc. 723910 Crane Eye A18
4 pc. 017020 Standard Coupler NK 48/48, galv.
Technical Data
Bearing capacity: see PERI product information.
1259
103949
61,900
Pre-assembled bracket. For the supporting of and
supporting on pre-cast concete elements.
1094
973
Service
340
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
min 1300
4972
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
FTF Facade Formwork
172
300
Formwork Girders
FTF Facade Formwork
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
186
Wall Formwork
For aligning the top prefabricated section and connecting scaffold tubes.
125
Item no. Weight kg
104070
5,670
max 235
150
Column Formwork
526
1,870
FTF Spindle Guide
For connecting scaffold tubes to the Steel Walers
SRZ.
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
Slab Formwork
103945
125
178
Ø42
Shoring Systems
235
Climbing Systems
Complete with
3 pc. 105822 Bolt Ø 20 x 102, galv.
1 pc. 027170 Bolt Ø 16 x 42, galv.
410
Working Platforms
Ø48,3
48
Complete with
3 pc. 105822 Bolt Ø 20 x 102, galv.
For assembly of a horizontal Steel Waler SRU on
the FTF Bracket 500. With connection for scaffold
tube.
203
5,630
125
104083
Bridge- and
Tunnel Formwork
170
Ø48,3
346
48
170
173
Service
For assembly of a horizontal Steel Waler SRU on
the FTF Bracket 500. With connections for pushpull prop and scaffold tube.
203
6,280
125
103944
Item no. Weight kg
723910
0,800
Crane Eye A18
Column Formwork
Wall Formwork
111
Formwork Girders
FTF Facade Formwork
171
105822
0,236
102
68
Ø8
018060
0,030
105905
11,000
Accessories
For moving completely assembled units.
Safety Instructions
Load-carrying capacity 1.4 t with crang sling
angle ≤ 45°.
.
Working Platforms
40 00
Climbing Systems
Shoring Systems
Slab Formwork
Ø20
Service
Bridge- and
Tunnel Formwork
45°
174
Formwork Girders
FTF Facade Formwork
Wall Formwork
FTF Assembly Device
As assembly aid for basic assembly of FTF bracket
units.
345
Item no. Weight kg
104195
8,780
2,630
For setting the top adjusting bracket from the
ground.
Note
SW 38
Slab Formwork
104803
Column Formwork
80
1400
SW 36
Ø10
Ø18
Shoring Systems
1524
FTF Clamp
As additional fixing of the precast concrete element.
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
Climbing Systems
7,180
max 400
102
Note
Ø16,5
Ø16,5
2775
175
max 3800
Service
min 2910
Ø32
10
Ø 70
21,900
15
028020
Bridge- and
Tunnel Formwork
800
Working Platforms
263
104744
Item no. Weight kg
106000
1,820
For assembly of RSS push-pull props.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
150
026415
026417
026411
026412
026413
026414
026419
026418
3,550
0,000
3,550
7,100
10,650
14,200
17,750
21,600
Scaffold Tubes Steel Ø 48,3 x 3,2
Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0
100
12
Ø21
L
m
m
m
m
m
m
1000
2000
3000
4000
5000
6000
Slab Formwork
Column Formwork
85
Ø11
Wall Formwork
Formwork Girders
FTF Facade Formwork
L
14,100
14,000
Note
24-80 R.
Technical Data
120
027060
027070
Working Platforms
Climbing Systems
Shoring Systems
Ø48,3x3,2
1050
460
35
Service
72
9
85
600
Bridge- and
Tunnel Formwork
1274
Ø7
176
Formwork Girders
FTF Facade Formwork
497
Wall Formwork
As guardrail for concreting scaffold.
627
Item no. Weight kg
104018
7,490
Plywood sheet, d = 39 mm, for constructing a
working scaffold with FTF column formwork.
Slab Formwork
21,200
858
600
103946
Ø6
Column Formwork
766
150
Ø9
1800
Shoring Systems
39
Complete with
1 pc. 024210 Tie Yoke SKZ
Climbing Systems
For bracing FTF column formwork.
92
5,350
40
104017
595
717
125
226
DW 15
177
Service
45
Complete with
2 pc. 105822 Bolt Ø 20 x 102, galv.
102
For anchoring FTF column formwork. Installed in
the external SRU steel waler.
57
5,580
80
103942
Bridge- and
Tunnel Formwork
84
Working Platforms
B 15
Service
178
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
183
186
188
195
193
193
189
191
193
198
188
188
188
190
190
190
193
193
193
198
190
192
194
182
197
182
189
191
Climbing Systems
Spindle TR 60 x 9/43
Steel Waler SRZ U-100 l = 2.45 m
Swivel Coupling DK 48/48, galv.
Tension Relase Plate SB DW 26
Tension Rod with Nut 100/M 30
Threaded Anchor Plate DW 15
Tie Rod DW 15 l = 0.50 m
Tie Rod DW 15 spec. length
Tie Rod DW 20 Spec. Length
V-Tie Holder DW 15
V-Tie Holder DW 20
V-Tie Holder DW 26
Waler Connector SB-A, B, C
Wall Scaffold Hinge SB double
Wedge K, galv.
Wingnut DW 15, galv.
Working Platforms
025730
010050
017010
101621
027540
027230
030840
030860
030870
030870
030005
030480
030030
030640
030641
030700
030645
030646
030340
030340
031580
031590
031600
025760
111866
024250
030100
030990
Bridge- and
Tunnel Formwork
199
195
199
199
195
196
195
187
187
198
199
181
182
197
196
189
183
184
180
180
181
181
196
197
187
185
182
192
193
188
188
190
193
198
189
183
187
194
194
189
191
191
184
199
190
192
194
187
186
185
185
188
188
188
188
188
188
188
198
182
184
190
192
195
188
188
188
Allan Key SW 14, long
Anchor Plate SB - DW 26
Anchor Positioning Plate M36, galv.
Anchor Positioning Stud M 36, galv.
Anchor Waler U140 l = 0.55 m
Base Plate-2 for RS 1000, galv.
Bolt ISO 4014 M20 x 100-8.8, galv.
Bolt ISO 4014 M36 x 130-10.9, galv.
Bolt ISO 4017 M36 x 70-8.8, galv.
Brace Frame Adaptor SB 2
Brace Frame Adaptor SB A0, A, B
Brace Frame Double Anchor DW 15
Brace Frame SB 1
Brace Frame SB 2
Brace Frame SB-A
Brace Frame SB-A0
Brace Frame SB-B
Brace Frame SB-C
Brace Frame Wall Scaffold Hinge
Climbing Cone-2 M 36/DW 26, galv.
Compensation Washer 20, galv.
Counterplate DW 20, 120 x 120 x 20
Coupling Nut M 30/DW 26, galv.
Cutting Cost Tie Rod DW 15/ B 15
Cutting Cost Tie Rod DW 20
Double Anchor Tie Yoke DSW
Guide Roller SB-A, B
Heavy Duty Spindle SLS 140/240
Hex. Coupler DW 26 SW 46/150, weldable
Hex. Nut DW 15 SW 30/108, galv.
Hex. Nut DW 20 SW 36/110
Leading Anchor Coupler DW 15, compl.
Nut ISO 4032-M20-8, galv.
SB-L Anchor Bracket
SB-L Tension Strut, l = 740 mm
Hook Strap SB-2, asymetric
Scaff. Tube Steel Ø 48.3 x 3.2, l = 1.0 m
Scaff. Tube Steel Ø 48.3 x 3.2, per m
Scaffold Mounting Ring M36, galv.
Crane Eye SB-2
Spacer Tube rough DR 32 l = 3.00 m
Spanner SW 46, for SB
179
Service
027212
027480
029390
026460
027650
027530
109017
102018
024910
029550
029430
027690
113255
106663
106662
030060
027500
027510
025700
025690
025710
025720
106661
030940
024180
027680
025740
030830
030400
026417
030050
030800
030500
030500
027520
025750
101776
030980
030970
030090
030590
030580
027590
029440
031631
031632
031633
710334
100903
100901
116078
026411
026412
026413
026414
026419
026418
026415
029490
114107
116065
031627
031634
031634
027211
027213
027210
Shoring Systems
SB Brace Frame
Item no. Weight kg
025690 412,000
Brace Frame SB-A0
For forming single-sided walls and special applications.
Column Formwork
Wall Formwork
Complete with
1 pc. 030130 Cam Nut DW 15, galv.
1 pc. 710545 Bolt Ø 50 x 150, galv.
2 pc. 017040 Screw-On Coupler AK 48, galv.
1 pc. 025730 Spindle TR 60 x 9/43
1 pc. 700553 Adapter
Note
Safety Instructions
Load-bearing point, capacity 1.2 t per sling with
crane sling angle ≤ 15°.
150
3060
min 215
max 415
Slab Formwork
1980
1930
Formwork Girders
SB Brace Frame
3885
Shoring Systems
4060
Working Platforms
Climbing Systems
025700
Brace Frame SB-A
Complete with
1 pc. 025730 Spindle TR 60 x 9/43
Note
Safety Instructions
1930
2885
3060
180
min 215
max 415
1980
Bridge- and
Tunnel Formwork
150
2060
Service
324,000
Formwork Girders
SB Brace Frame
Complete with
1 pc. 710545 Bolt Ø 50 x 150, galv.
1 pc. 025730 Spindle TR 60 x 9/43
Note
Safety Instructions
Wall Formwork
Brace Frame SB-B
Column Formwork
Item no. Weight kg
025710 276,000
Shoring Systems
min 215
max 415
2780
Slab Formwork
95
660
1885
2060
Brace Frame SB-C
Complete with
1 pc. 715936 Bolt with Split Bolt
Note
Safety Instructions
Load-bearing point: capacity
1.5 t with crane sling angle ≤ 15°,
2.5 t with vertical lift.
Climbing Systems
49,900
Working Platforms
025720
1190
Ø50
Bridge- and
Tunnel Formwork
Ø25x180
0,368
165
125
Ø19
181
Service
027690
578
Formwork Girders
SB Brace Frame
Item no. Weight kg
113255
0,433
Frames SB.
127
Q45
Ø19
114107
1,250
Frames SB.
83
9,140
Note
027690
113255
114107
0,368
0,433
1,250
025760
1,300
120
130
Accessories
Bolt Ø 19 x 165, SB-TRIO, galv.
For connecting Steel Walers SRZ and SRU, Profile
U100 and U120 to SB-A0, A, B, C.
95
230
0,331
024250
0,331
Accessories
Wedge K, galv.
Wedge K, galv.
Ø8
35
024250
20
208
182
156
136
200
SRZ U 120
SRZ U 100
8
Climbing Systems
125
Working Platforms
Bridge- and
Tunnel Formwork
Service
Ø 54
130
025740
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
180
Formwork Girders
SB Brace Frame
Item no. Weight kg
025750
28,700
For moving SB-A0, SB-A und SB-B brace frame
units.
Technical Data
Bearing capacity 1.2 t.
255
200
Note
Wrench size SW 80.
Ø59
200
285
Shoring Systems
Rear compression brace for SB-A0, SB-A, SB-B.
Bridge- and
Tunnel Formwork
Working Platforms
Complete with
Note
Safety Instructions
1170
min 145
max 510
Brace Frame SB 1
2320
136,000
min 145
max 305
027500
Climbing Systems
150
250
SW 80
1950
183
Service
29,100
310
Slab Formwork
354
025730
Column Formwork
330
510
180
Wall Formwork
104
Item no. Weight kg
027510 364,000
Brace Frame SB 2
Complete with
1 pc. 715121 Adjusting Unit SB-2
2 pc. 710067 Hex. Nut TR 60 x 9
Note
Shoring Systems
Slab Formwork
4680
Column Formwork
Wall Formwork
Formwork Girders
SB Brace Frame
2551
116065
3,680
Crane Eye SB-2
As Crane Eye for Brace Frame SB-2.
Working Platforms
Note
Permissible bearing capacity 1.0 t.
80
Ø50
105
Climbing Systems
2610
135
120
Service
2,400
For fixing Brace Frame SB-1 and SB-2 to Steel
252
Note
Wrench size SW 22.
SW 22
M 14
Bridge- and
Tunnel Formwork
160
027590
M 12
152 (U 100)
162 (U 120)
172 (U 140)
184
150
Formwork Girders
SB Brace Frame
Item no. Weight kg
116078
3,970
Hook Strap SB-2, asymetric
For fixing Brace Frame SB-2 to Steel Waler SRZ
and SRU Profile U100 - U140.
Note
Wrench size 18.
Wall Formwork
SW 18
M 12
152 (U 100)
140
Column Formwork
162 (U 120)
49,600
Safety Instructions
240
490
Climbing Systems
650
Shoring Systems
max 1650
1770
min 1270
120
265
160
60
250
Slab Formwork
027680
21
Working Platforms
For Brace Frame SB-L. For forming single-sided
walls.
Note
820
40
740
Ø21
Bridge- and
Tunnel Formwork
5,370
40
100901
Accessories
185
Service
0,368
2,400
0,433
1,250
50
027690
027590
113255
114107
Item no. Weight kg
100903
12,000
SB-L Anchor Bracket
For Brace Frame SB-L. For forming single-sided
walls.
Complete with
1 pc. 105400 Bolt Ø 20 x 140, galv.
Note
300
Wall Formwork
710334
024180
024910
0,064
0,126
0,303
010050
51,600
50
Accessories
Bolt ISO 4014 M20 x 100-8.8, galv.
Steel waler for VARIO GT 24 panels and special
applications.
Note
Technical Data
Wy = 82.4 cm³, ly = 412 cm4
L
93
170
135
205
25
20
Climbing Systems
30
40
X x 60
Ø9
100
60
Working Platforms
Ø6
52
Bridge- and
Tunnel Formwork
152
Service
Ø20x140
365
Shoring Systems
Slab Formwork
Column Formwork
Ø21
186
53
Formwork Girders
SB Brace Frame
Formwork Girders
SB Brace Frame
Complete with
2 pc. 105400 Bolt Ø 20 x 140, galv.
Ø21
Wall Formwork
For assembly of RS 1000/1400 push-pull props.
108
Item no. Weight kg
102018
4,880
290
Column Formwork
95
24,330
As adjustable spindle in lattice frameworks with
SRU Steel Walers and RCS Climbing Rails.
Note
Permissible load:
See PERI Design Tables.
max 2400
Shoring Systems
min 1400
Ø21
Ø 48,3
Ø89
1346
Slab Formwork
101776
0,303
Bolt ISO 4014 M20 x 100-8.8, galv.
Climbing Systems
024910
100
M 20
710334
0,064
Working Platforms
SW 30
M 20
0,126
Ø 58
6
6,5
Ø20,5
187
Service
024180
Bridge- and
Tunnel Formwork
SW 30
Formwork Girders
Item no. Weight kg
026415
026417
026411
026412
026413
026414
026419
026418
3,550
0,000
3,550
7,100
10,650
14,200
17,750
21,600
Scaffold Tubes Steel Ø 48.3 x 3.2
Scaff. Tube Steel Ø 48.3 x 3.2, per m
L
1000
2000
3000
4000
5000
6000
L
Ø48,3x3,2
1,400
For Scaffold Tubes Ø 48 mm.
Note
Wrench size SW 19.
(27)
017010
SW 19
027210
027213
027211
3,300
2,300
0,760
Spanner SW for SB
For different applications.
L
645
570
380
L
030030
030050
030005
030480
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
SB Brace Frame
1,440
0,000
0,720
1,440
Tie Rod DW 15
Note
Non-weldable! Take official approval into consideration!
Technical Data
DW 15
188
Formwork Girders
SB Brace Frame
Item no. Weight kg
030840
0,516
Threaded Plate DW 15
For use with Tie Rod DW 15 or B 15. For anchoring
in the concrete.
Note
Permissible load: see PERI Product Information.
Lost anchor part.
Ø 80
Ø6
Non-weldable! Take approval into consideration!
Technical Data
Permissible load 2 x 90 kN. Dependent on concrete strength and installation depth.
Slab Formwork
For coupling Tie Rod DW 15 and B 15.
0
45°
Note
Wrench size SW 30.
Technical Data
Shoring Systems
0,402
230
00
030090
35
R1
235
290
DW 15
108
52
52
SW 30
DW 15
0,438
Note
Wrench size SW 27.
Technical Data
Climbing Systems
030100
50
Working Platforms
110
34
SW 27
7,030
For anchoring with Tie Rod DW 15.
Technical Data
Permissible load 2 x 90 kN.
330
230
Ø20
Ø60
027520
Bridge- and
Tunnel Formwork
DW 15
189
2,130
Service
030060
Column Formwork
Ø27
Wall Formwork
60
DW 15
Formwork Girders
SB Brace Frame
Item no. Weight kg
031580
0,440
V-Tie Holder DW 15
For easy installation of DW 15 Tie Rods at 45°
inclinations.
Wall Formwork
298
Column Formwork
50
DW 15
0,345
For easy installation of DW 15 ties at 45°
inclinations.
Slab Formwork
031631
Note
Wrench size SW 70.
200
90
Shoring Systems
DW 15
SW 70
030700
030800
030640
030641
Bridge- and
Tunnel Formwork
Working Platforms
2,560
0,000
1,280
2,560
Tie Rods DW 20
Note
Technical Data
DW 20
190
Ø 37
L
Service
Plastic Spacer Tube for DW 15, B 15.
Ø 32
0,967
Climbing Systems
031627
For use with Tie Rod DW 20, B 20 or Screw-On
Cone-2 M24/DW 20. For anchoring in the
concrete.
Note
Lost anchor part.
Wall Formwork
Item no. Weight kg
030860
0,801
65
DW 20
Ø6
Column Formwork
32
100
Formwork Girders
SB Brace Frame
0,685
Note
Wrench size SW 36.
Technical Data
Slab Formwork
030590
110
53
53
DW 20
Shoring Systems
SW 36
0,371
Note
Wrench size SW 36.
Technical Data
Climbing Systems
030580
60
Working Platforms
DW 20
SW 36
Bridge- and
Tunnel Formwork
Note
Wrench size SW 36.
Technical Data
DW 20
SW 36
60
191
Service
130
0,786
Ø42
030990
Item no. Weight kg
030830
2,180
Technical Data
120
Wall Formwork
Formwork Girders
SB Brace Frame
Ø26
20
Column Formwork
120
0,420
V-Tie Holder DW 20
inclinations.
Slab Formwork
031590
298
50
Shoring Systems
DW 20
0,355
Climbing Systems
031632
inclinations.
200
Working Platforms
031634
1,250
Spacer Tube rough DR 42 l = 3,00 m
Plastic Spacer Tube for DW 20, 26.
192
Ø47
L
Ø 42
Bridge- and
Tunnel Formwork
SW 70
DW 20
90
Service
Note
Wrench size SW 70.
Item no. Weight kg
4,480
0,000
2,240
4,480
Tie Rod DW 26
Note
Technical Data
Wall Formwork
030340
030500
030645
030646
Formwork Girders
SB Brace Frame
Column Formwork
DW 26
1,240
For use with Tie Rod DW 26 or Screw-On Cone
M30 / DW 26. For anchoring in the concrete.
Note
Lost anchor part.
Slab Formwork
030870
70
DW 26
Shoring Systems
40
120
Ø8
2,620
For coupling Tension Rod and Tie Rod DW 26.
Note
Wrench size SW 46.
Technical Data
Climbing Systems
030400
195
100
55
90
Note
Wrench size SW 46 and SW 22.
Technical Data
SW 22
SW 46
M 30
200
Working Platforms
Bridge- and
Tunnel Formwork
Tension Rod M30 with Nut
For anchoring the Brace Frame SB.
5,170
6,810
400 / 750
1000 / 1350
193
Service
027540
027230
M 30
DW 26
SW 46
Item no. Weight kg
030980
1,540
For coupling Tie Rod DW 26.
Note
Weldable! Wrench size SW 46.
Technical Data
Wall Formwork
Formwork Girders
SB Brace Frame
150
72
72
DW 26
Column Formwork
SW 46
0,800
Slab Formwork
030970
Note
Technical Data
80
DW 26
Shoring Systems
SW 46
031600
0,430
V-Tie Holder DW 26
inclinations.
298
Working Platforms
50
Climbing Systems
DW 26
031633
0,365
inclinations.
Note
Wrench size SW 70.
Bridge- and
Tunnel Formwork
200
Service
SW 70
DW 26
90
194
Formwork Girders
SB Brace Frame
Item no. Weight kg
031634
1,250
Plastic Spacer Tube for DW 20, 26.
10,100
For anchoring the Brace Frame SB. Allows easy
release of higher tensile loads. In connection with
Anchor Waler 55 or 235. Turn bolt to working position before shuttering.
Wall Formwork
Note
Wrench size SW 46.
Technical Data
Column Formwork
101621
Ø47
Ø 42
L
210
180
47
50
16
47
169
25
50
027480
7,960
Shoring Systems
63
Ø35
175
63
Slab Formwork
SW 46
Technical Data
180
25
11,600
Anchor Waler U160 l = 0,55 m
Technical Data
160
109017
Working Platforms
63
50
Ø35
140
Climbing Systems
65
63
50
175
65
9,940
Technical Data
140
027650
65
350
550
60
195
Service
550
Bridge- and
Tunnel Formwork
350
Item no. Weight kg
027530
39,800
Technical Data
225
Wall Formwork
Formwork Girders
SB Brace Frame
350
350
225
2350
Column Formwork
140
60
32,000
For hoizontal use of PERI Brace Frames SB-A0, A,
B and SB-2 as climbing brackets.
Note
Permissible load: see PERI product information.
Shoring Systems
580
Slab Formwork
106661
119
304
106662
106663
4,870
13,900
106662
4,870
For mounting the brace frame wall scaffold hinge
to the Brace Frame SB-A0, A or B
Complete with
2 pc. 106803 Nuts ISO 7042 M24-10, galv.
Note
Wrench size SW 36.
Bridge- and
Tunnel Formwork
225
Service
Accessories
M 24x220
SW 36
235
Working Platforms
Climbing Systems
235
196
50
Complete with
2 pc. 106803 Nuts ISO 7042 M24-10, galv.
Note
Wrench size SW 36.
Wall Formwork
For mounting the brace frame wall scaffold hinge
to the Brace Frame SB-2.
261
Item no. Weight kg
106663
13,900
Formwork Girders
SB Brace Frame
M 24x500
SW 36
235
Column Formwork
515
For hoizontal use of PERI Brace Frames SB-A0, A,
B as climbing brackets.
Note
Slab Formwork
64,600
Shoring Systems
613
290
111866
Tie System M36.
For anchoring climbing systems.
Note
Permissible load see PERI product information.
Wrench size SW 55.
137
SW 55
25
1,240
4,480
030870
030340
Ø 93
M 36
DW 26
90
Bridge- and
Tunnel Formwork
3,040
Accessories
197
Service
030940
Working Platforms
390
Climbing Systems
482
Item no. Weight kg
029490
1,770
Tie System M36.
Note
Ø 98
Wall Formwork
Formwork Girders
SB Brace Frame
029550
1,400
030870
1,240
Accessories
Bolt ISO 4014 M36 x 130-10.9, galv.
Note
Lost anchor part.
Slab Formwork
Column Formwork
90
70
DW 26
Climbing Systems
Shoring Systems
40
120
Ø8
030340
030500
4,480
0,000
Tie Rod DW 26
Note
Technical Data
Bridge- and
Tunnel Formwork
Working Platforms
DW 26
029550
1,400
Bolt ISO 4014 M36 x 130-10.9, galv.
High-strength bolts for anchoring climbing
systems.
Note
Wrench size SW 55.
Service
130
M 36
SW 55
198
Formwork Girders
SB Brace Frame
Item no. Weight kg
029430
0,930
Bolt ISO 4017 M36 x 70-8.8, galv.
Bolt for anchoring of climbing systems and as
advancing bolt.
Note
Wrench size SW 55.
Wall Formwork
70
M 36
SW 55
0,170
For fixing the M24 anchor system if the plywood
formlining is drilled through.
Column Formwork
029390
80
Ø7
Ø36,5
029440
0,005
Accessories
029440
0,005
Slab Formwork
6
Shoring Systems
60
Note
Wrench size SW 10.
20
Climbing Systems
SW 10
M6
0,308
formlining is not drilled through.
Note
Wrench size SW 14.
Working Platforms
026460
SW 14
Ø 83
M 36
Ø7
Ø4,5
027212
0,445
Accessories
Nail 3 x 80
0,445
0,005
For unscrewing the Anchor Positioning Stud M24,
M30 and M36.
SW 14
230
199
Service
027212
710312
Bridge- and
Tunnel Formwork
33
Service
200
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
208
202
204
203
208
208
207
208
207
207
207
207
205
208
206
206
204
205
205
203
204
202
202
202
203
203
206
206
Base Plate for RS, compl.
Bolt Ø 16 x 65/86, galv.
Brace Connector DRA
Brace Connector HDR
Brace Connector QR
Brace Connector-3 RAPID, galv.
Connector Kicker/Push-Pull Prop, galv.
Kicker AV
Kicker AV 210
Kicker AV RSS III
Push-Pull Prop RS 1000, galv.
Push-Pull Prop RS I
Push-Pull Prop RS II
Push-Pull Prop RSS III
Wedge K, galv.
201
Service
103606
028100
102018
106000
027170
018050
066082
022016
034550
037530
023660
037190
028080
018060
028050
028070
028110
108135
028120
028990
103800
028210
028220
028010
028020
028030
028060
024250
Formwork Girders
Item no. Weight kg
028210
12,800
Push-Pull Prop RS I
Note
Ø 48,3
Ø16,5
Ø16,5
Column Formwork
5
12
Ø16,3
max 2940
Ø57
Wall Formwork
min 1840
16,500
Note
Slab Formwork
028220
Ø48,3
Ø16,5
Shoring Systems
5
12
Ø16,5
Ø16,3
max 4060
Ø57
min 2560
1,830
Climbing Systems
028100
Base Plate for RS
For assembly of RS push-pull props.
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
85
Ø13
90
17,800
Note
Bridge- and
Tunnel Formwork
min 2050
Ø16,5
Ø16,5
202
10
15
1915
Service
max 2940
Ø32
Ø 70
Working Platforms
150
028010
10
Ø21
Formwork Girders
Note
min 2910
max 3800
Wall Formwork
Item no. Weight kg
028020
21,900
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
Note
min 4600
Slab Formwork
38,400
max 6000
4399
16,5
1,820
Base Plate-2 for RSS, galv.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
85
Ø11
Climbing Systems
106000
9
15
16,5
Ø 82,5
Ø48,3
Shoring Systems
028030
Working Platforms
Note
max 10000
Ø48,3
Bridge- and
Tunnel Formwork
min 6325
Ø17
Ø21
Ø21
203
10
115,000
102
028990
100
Service
150
12
Ø21
Formwork Girders
Item no. Weight kg
103800 271,000
Note
Chain removable by personnel on the ground.
Wall Formwork
min 6400
max 14000
6290
10
Ø48,3
Ø17
Ø21
Ø21
4,880
For assembly of RS 1000/1400 push-pull props.
Complete with
2 pc. 105400 Bolt Ø 20 x 140, galv.
Ø21
108
102018
290
028110
Working Platforms
Climbing Systems
20 x 200 = 4000
Ø48,3
Shoring Systems
Slab Formwork
Column Formwork
20 x 200 = 4000
5,180
Kicker AV
95
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1080
max 1400
Bridge- and
Tunnel Formwork
Ø16x42
Ø16,5
204
10
10
980
Service
Ø 38
Ø30
Formwork Girders
Kicker AV 210
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
Wall Formwork
Item no. Weight kg
108135
13,000
max 2100
Ø 70
Ø36
Ø16x42
Ø16,5
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Technical Data
Permissible tension force 14,9 kN under 30°.
Permissible compressive force 31,6 kN under 30°.
Ø25
100
Bridge- and
Tunnel Formwork
200
to Main Beam HDT.
85
2,970
12
028080
10
10
1915
Shoring Systems
min 2030
Slab Formwork
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
Climbing Systems
Kicker AV RSS III
Working Platforms
16,900
205
Service
028120
Column Formwork
10
10
1171
Formwork Girders
Item no. Weight kg
028050
4,550
to GT 24 girders
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Wall Formwork
145
Column Formwork
170
40 min 40
14
4,680
Slab Formwork
028070
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
145
40
Shoring Systems
170
min 52
max 100
14
Wedge Headpiece SRZ/SRU
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
100
Working Platforms
U140
0,331
024250
0,331
Accessories
Wedge K, galv.
Wedge K, galv.
Ø8
Service
35
20
208
206
8
Bridge- and
Tunnel Formwork
U120
024250
48
14
24
U100
82
1,910
Climbing Systems
028060
Formwork Girders
Wall Formwork
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
185
169
Item no. Weight kg
023660
3,310
Column Formwork
222
to the RAPID column frame.
Complete with
1 pc. 037160 Bolt Ø 20 x 205, galv.
1 pc. 027170 Bolt Ø 16 x 42, galv.
Slab Formwork
3,010
165
DW 15
Brace Connector QUATTRO QR
For connecting push-pull props and kickers to
QUATTRO and LICO panels.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Climbing Systems
1,140
24
1,120
to HANDSET elements.
93
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
122
180
60
Bridge- and
Tunnel Formwork
034550
Working Platforms
155
037530
20
Shoring Systems
Ø16x42
315
Brace Connector DRA
For connecting push pull props and kicker braces
to DOMINO elements.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
120
Ø16x42
68
1,040
117
066082
Ø16x42
98
207
Service
037190
Brace Connector HDR
to HDS and HDSS Prop Sections.
75
14
027170
0,102
Ø16x42
60
60
43
Ø5
24
Column Formwork
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
171
Item no. Weight kg
022016
1,300
Wall Formwork
Formwork Girders
Shoring Systems
Slab Formwork
16
018060
0,030
018050
0,171
Accessories
110
85
Working Platforms
Climbing Systems
64
Ø25
Ø5
Ø16
018060
0,030
018060
0,030
Accessories
Bridge- and
Tunnel Formwork
Ø4
103606
0,330
props, bracing etc.
Note
Wrench size SW 30.
SW 30
MMS 20
Service
138
208
Service
209
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
210
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Shoring Systems
Slab Formwork
Column Formwork
217
217
220
214
215
215
213
213
219
212
Climbing Systems
Tie Rod Spanner DW 15
Tie Rod Wrench 15, galv.
Tie Yoke SRU
Waterstop Centrepiece DW 15
Weld on Anchor DW 15
Working Platforms
108129
031070
031050
110755
031150
031300
030110
030100
030990
030370
Bridge- and
Tunnel Formwork
222
222
215
215
216
216
214
218
218
218
214
220
221
212
212
219
219
221
218
223
216
221
221
213
213
213
219
220
218
218
222
218
216
217
217
217
217
217
220
222
215
214
223
212
212
219
214
212
212
212
212
212
212
212
212
212
212
212
219
219
219
219
219
221
221
221
221
Adapter I for Pretension Jack
Adapter III for Pretension Jack
Anchor Positioning Stud f. AH-DW 15,
Anchor Sleeve DW 15
Articulated Spanner RCS DW 15
Bracing Shoe RCS DW 15
Concrete Spacer Tube FZR 22 l = 0.90 m
Cone DR 22
Cone FZR 22
Cutting Cost Tube FZR 22
Drill- and Pretension Device 45°
Eye Nut RCS DW 15
Hex. Nut DW 15 SW 30/50, weldable
Plug DR 22
Plug FZR 22 mm
Pretension Jack for DW 15/20/26
Repoxal Glue, 1 kg
Rock Anchor HB DW 15
Three Wingnut DW 15, galv.
Tie Load Gauge 160 kN
Tie Rod B 15 l = 0.30 m
Tie Rod B 15 spec. length
Tie Rod DW 15 l = 0,50 m
Tie Rod DW 26 l = 6.00m
211
Service
030663
030664
026440
026280
115375
114997
030130
031260
065033
031390
030140
030830
030420
030050
030050
030800
030800
030500
031320
102390
115378
030980
030970
030090
030070
030550
030590
030580
065036
031360
030460
031550
108795
065030
065031
065027
031626
031627
030860
030870
030840
030190
110612
030150
030740
030745
022030
030005
030010
030480
030490
030170
030020
030180
030710
030720
030730
030160
030640
030641
030680
030700
030700
030645
030646
030690
030340
Wall Formwork
Tie System DW 15, 20, 26, B 15, 20
Formwork Girders
Wall Formwork
Item no. Weight kg
030030
030050
030005
030010
030480
030490
030170
030020
030180
030710
030720
030730
030160
1,440
0,000
0,720
1,220
1,440
1,730
2,160
2,450
2,880
3,600
4,320
5,040
8,640
Tie Rod DW 15
Note
Technical Data
DW 15
030740
030050
030150
1,550
0,000
0,420
Tie Rods B 15
Tie Rod B 15 l = 0.30 m
030370
1,560
Technical Data
Bridge- and
Tunnel Formwork
117
Ø10
Service
72
212
110
Working Platforms
Note
Weldable! Take official approval into consideration!
Technical Data
B 15
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Tie System DW 15, 20, 26 B 15, 20
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Note
Wrench size SW 27.
Technical Data
96
Wall Formwork
Item no. Weight kg
030110
0,799
50
110
SW 27
0,438
Note
Wrench size SW 27.
Technical Data
Slab Formwork
030100
Column Formwork
DW 15
50
Shoring Systems
110
34
SW 27
DW 15
0,222
Note
Wrench size SW 30.
Technical Data
Climbing Systems
030070
50
SW 30
Note
Technical Data
Bridge- and
Tunnel Formwork
0,233
50
SW 30
030090
0,402
DW 15
Note
Wrench size SW 30.
Technical Data
108
52
52
SW 30
DW 15
213
Service
030550
Working Platforms
DW 15
Item no. Weight kg
030190
0,462
Wall Formwork
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Note
Wrench size SW 27.
Technical Data
90
50
40
DW 15
Column Formwork
SW 27
0,318
Slab Formwork
030130
Note
Wrench size SW 27.
Technical Data
50
50
SW 27
030140
1,620
Technical Data
120
Working Platforms
Climbing Systems
Shoring Systems
DW 15
15
20
20
022030
2,170
Tie Yoke, galv.
Technical Data
150
Ø 50
110755
5,140
Tie Yoke SRU
Suitable for Tie Rod DW 15.
Ø18
60
Bridge- and
Tunnel Formwork
Ø20
Service
250
214
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Item no. Weight kg
031150
0,797
Waterstop Centrepiece DW 15, raw
026280
1,220
Anchor Sleeve DW 15
Wall Formwork
110
Note
100
68
8
120
15
Column Formwork
Ø 80
Ø 51
Ø 36
DW 15
Slab Formwork
Ø 31
Ø12
026440
0,100
Anchor Positioning Stud f. AH-DW 15, galv.
For fixing the Anchor Sleeve DW 15 if the plywood
Shoring Systems
DW 15
Note
Wrench size SW 10.
50
030840
0,516
For use with Tie Rod DW 15 or B 15. For anchoring
in the concrete.
Note
Lost anchor part.
60
Ø27
DW 15
Technical Data
6
180
For anchoring single-sided formwork.
150
1,350
60
031300
Bridge- and
Tunnel Formwork
Ø 80
Ø6
Working Platforms
Ø5
DW 15
215
Service
DW 15
Climbing Systems
Ø50
SW 10
Item no. Weight kg
114997
7,160
For anchoring the bracing with DW 15 to the
building slab. Fixation with anchor system M24
or corresponding dowels.
Wall Formwork
Complete with
1 pc. 104031 Bolt Ø 21 x 120
Note
230
Ø25
Ø23
78
Column Formwork
130
Ø21x120
Ø32
310
Ø26,5
125
For tensioning and as an articulated connection to
the Climbing Rail RCS, Steel Waler SRU or Bracing
Shoe RCS for bracing with DW 15.
110
6,100
Slab Formwork
115375
200
12
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Ø20
150
40
104031
111567
030070
0,462
0,729
0,222
115378
1,110
Climbing Systems
DW 15
107
Working Platforms
Bridge- and
Tunnel Formwork
Eye Nut RCS DW 15
As an articulated connection to the Climbing Rail
RCS, Steel Waler SRU for bracing with DW 15.
Ø26,5
104031
111567
0,462
0,729
108795
0,450
Service
Accessories
Bolt Ø 21 x 120
Bolt Ø 26 x 120
64
Shoring Systems
265
40
Accessories
Bolt Ø 21 x 120
Bolt Ø 26 x 120
For subsequent anchoring with DW 15 tie rods.
Diameter of drilled hole 36.5 - 38 mm.
Technical Data
Permissible load 90 kN. Dependent on rock and /
or concrete strength and installation depth.
Safety Instructions
100
DW 15
216
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
For easy handling of Tie Rod DW 15.
250
3,480
15
For Wingnut Counterplate DW 15, Wingnut Pivot
Plate DW 15 and Wingnut DW 15.
Column Formwork
108129
Wall Formwork
140
Item no. Weight kg
031070
1,260
74
25
Climbing Systems
Working Platforms
Ø 22
0,886
Ø 26
031626
Ø28
L
Ø33
Spacer Tubes rough DR 22
Ø 37
0,359
0,050
0,039
Ø 32
065027
065031
065030
Shoring Systems
130
Slab Formwork
1096
0,967
Plastic Spacer Tube for DW 26.
L
217
Service
031627
Bridge- and
Tunnel Formwork
L
Item no. Weight kg
065033
0,010
Cone DR 22
Plastic. Sutable for Spacer Tube DR 22.
Note
15
32,5
065036
0,002
Plug DR 22
Plastic. Suitable for Spacer Tube DR 22.
Note
Ø 22
Ø 23
17
1,500
0,000
Concrete Spacer Tube FZR
Spacer Tube made of fibre reinforced concrete for
use with Tie Rod DW 15. Asbestos-free!
031390
0,005
Cone FZR 22
Suitable for FZR 22.
Bridge- and
Tunnel Formwork
Ø 22
Note
Ø 22
Ø45
Working Platforms
Climbing Systems
L
12
36
031360
0,017
Plug FZR 22 mm
Made of fibre reinforced concrete. Suitable for
FZR 22.
Note
Service
Ø 22
20
031550
218
1,120
Repoxal Glue, 1 kg
Two-component adhesive for bonding fibre reinforced concrete plugs. Requirements: 1 kg adhesive for pprox. 330 Plugs FZR 22.
Note
Delivery unit 1.0 kg
Ø 26
031260
031320
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Ø 21
Ø 46
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Item no. Weight kg
2,560
0,000
1,280
2,560
15,360
Tie Rods DW 20
Note
Technical Data
Wall Formwork
030700
030800
030640
030641
030680
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
030745
030800
2,600
0,000
Tie Rod B 20
Tie rod B 20 spec. length
Note
Technical Data
Shoring Systems
B 20
Slab Formwork
Column Formwork
DW 20
0,786
Note
Wrench size SW 36.
Technical Data
Climbing Systems
030990
Working Platforms
130
0,685
Note
Wrench size SW 36.
Technical Data
110
53
030590
Bridge- and
Tunnel Formwork
60
53
DW 20
SW 36
219
Service
SW 36
Ø42
DW 20
Item no. Weight kg
030580
0,371
Note
Wrench size SW 36.
Technical Data
60
DW 20
SW 36
030830
2,180
Technical Data
120
Column Formwork
Wall Formwork
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Shoring Systems
Slab Formwork
Ø26
120
030860
0,801
concrete.
20
Note
Lost anchor part.
65
260
Service
1,780
140
031050
32
100
Ø6
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
DW 20
220
20
Item no. Weight kg
4,480
0,000
2,240
4,480
26,880
Tie Rods DW 26
Note
Technical Data
Wall Formwork
030340
030500
030645
030646
030690
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Column Formwork
DW 26
0,800
Note
Technical Data
Slab Formwork
030970
80
DW 26
030980
1,540
For coupling Tie Rod DW 26.
Shoring Systems
SW 46
Note
Technical Data
150
72
Climbing Systems
72
DW 26
Bridge- and
Tunnel Formwork
Technical Data
Ø32
120
20
221
Service
2,140
120
030420
Working Platforms
SW 46
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Item no. Weight kg
030870
1,240
Note
Lost anchor part.
Wall Formwork
70
DW 26
Column Formwork
40
120
Ø8
60,000
Slab Formwork
030460
For pre-tensioning tie rods, pulling out tie rods
embedded in the concrete and for clean connecting surfaces at concrete joints. Complete in metal
box.
Complete with
1 pc. 030663 Adapter I for Pretension Jack
1 pc. 030664 Adapter III for Pretension Jack
Technical Data
Maximum tension force 300 kN.
Safety Instructions
030663
2,000
Working Platforms
Climbing Systems
Shoring Systems
.
For use with the Pretension Jack for pre-tensioning the tie rods.
030664
1,700
For use with the Pretension Jack for pulling out
embedded tie rods from the concrete.
Ø120
Bridge- and
Tunnel Formwork
.
Service
Ø 160
222
70
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Wall Formwork
For drilling and pre-tensioning DW 15 tie rods with
45° inclined tie points (for use with Brace Frame
SB).
Column Formwork
120
150
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
210
Bridge- and
Tunnel Formwork
355
6,270
223
Service
102390
193
Item no. Weight kg
110612
6,220
Service
224
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
233
232
227
227
227
230
226
226
226
226
232
232
232
232
231
231
231
231
232
233
233
227
227
228
228
228
230
230
230
229
229
228
232
232
229
229
229
234
233
233
Concrete Cone Gauge
Cone Spanner TRH
DK Concrete Cone Architec. DW 15, 58/52
DK Concrete Cone DW 15 58/30
DK Concrete Cone UNI DW 15 58/52
DK Cone DW 15/35
DK Cone DW 15/55
DK Cone DW 20/55
DK Cone DW 26/55
DK Cone Remover UNI
DK Tongs for Concrete Cone 58
Glue Component A-2
Glue Component B-2
Glue for Concrete Cones-2 / 5kg Set
KK Concrete Cone M24 67/52
Ratchet Wrench 1"
Ratchet Wrench 1/2"
Sealing Cone MX 55
Sealing Cone TRH 55
SK Anchor Cone DW 15
SK Concrete Cone DW 20, 67/60
SK Lead Cone DW 15
SK Sealing Washer DW 20
SK Sealing Washer UNI DW 15
SK Tongs for Concrete Cone 100
SK Tube Seal 22
SK Tube Seal 28
SK Tube Seal 42
Socket SW 27-1/2"
Socket SW 46-1"
Socket Wrench SW 36, cromatized
225
Service
101995
110634
031641
031642
031643
031643
031635
031636
031637
031638
031655
031644
108958
110345
108136
031652
031653
031654
114797
029610
072180
112937
110675
031645
031646
031647
031650
031651
104643
031648
031649
031639
031657
031656
031671
031672
031677
029650
029630
031480
DK Cone DW 15/35
For fire-resistant and soundproof anchor points
with DW 15. Resistant to seepage. For use with
Spacer Tube rough 22.
Note
Ø22,3
Ø 61,5
Item no. Weight kg
031635
0,034
Wall Formwork
Formwork Girders
34
Column Formwork
21
Note
Ø 22,3
DK Cone DW 15/55
For waterproof, fire-resistant and soundproof
anchor points with Tie Rod DW 15.
Used with Spacer Tube rough 22.
Ø 61,5
0,063
Slab Formwork
031636
54
Shoring Systems
23
0,055
DK Cone DW 20/55
anchor points with Tie Rod DW 20. Used with
Spacer Tube rough 28.
Ø 28,5
DK Cone DW 26/55
anchor points with Tie Rod DW 26.
Used with Spacer Tube rough 42.
55
Note
Ø42,8
0,052
22
Ø61,5
Working Platforms
Bridge- and
Tunnel Formwork
031638
Service
Note
Ø61,5
Climbing Systems
031637
22
226
55
Note
For use with waterproofed concrete or architectural concrete. Install on both sides.
Wall Formwork
Sealing Cone MX 55
For use with MAXIMO. Use with Anchor MX.
Ø62
Item no. Weight kg
112937
0,183
0,172
Sealing Cone TRH 55
For use with TRIO Housing. Use with Anchor TRH.
Slab Formwork
110675
Accessories
Ø 62
0,893
Column Formwork
54
114797
Note
Ø 52,5
Climbing Systems
For closing anchor points with DK Sealing Cone
DW 15/35.
Ø 58,5
0,167
Shoring Systems
54
031642
30
DW 15/55, DW 20/55, DW 26/55 and SK Anchor
Cone DW 15.
Note
Ø 48
Working Platforms
0,265
Ø58,5
031643
Formwork Girders
20
227
Service
32
Note
Ø54
DW 15/55 with corresponding architectural
requirements.
Ø47
0,260
Ø47
031641
Bridge- and
Tunnel Formwork
52
Item no. Weight kg
031645
0,593
radiation-proof anchor points with Tie Rod DW 15.
Suitable for vaults and strongrooms.
Wall Formwork
Note
Wrench size SW 27.
Technical Data
Permissible load according to DIN 18216: 90 kN.
Tie rod length = wall thickness - 2 x 55 mm
DW 15
Ø 40
Ø 61,5
Formwork Girders
SW 27
56
Column Formwork
105
1,030
Slab Formwork
031646
Note
Wrench size SW 36.
Technical Data
Ø 46
Ø 70
DW 20
SW 36
Shoring Systems
68
127
1,920
Climbing Systems
031647
Note
Wrench size SW 46.
Technical Data
Ø 60
Working Platforms
70
138
For sealing DK Sealing Cones DW 15 and SK
Anchor Cones DW 15 on the formwork side.
Note
Safety Instructions
When using the SK Sealing Cover with SK Anchor
Cone, the tie rod must be shortened by 1 mm on
each side.
Ø 33
0,005
Ø62,2
031639
Bridge- and
Tunnel Formwork
SW 46
1
11
Service
Ø 103
DW 26
228
13
Note
Safety Instructions
Cone, the tie rod must be shortened by 2 mm on
each side.
Shoring Systems
1,7
14
SK Tube Seal 22
For spacer tube rough.
Note
Climbing Systems
0,002
Note
SK Tube Seal 42
Note
Ø 41
0,005
22
Ø 53
031677
Bridge- and
Tunnel Formwork
3
SK Tube Seal 28
Ø 27
0,003
Ø 43
031672
21
Working Platforms
3
Ø 22
Ø 35
031671
3
14
229
Service
For sealing SK Anchor Cones DW 26 on the formwork side.
Ø105
0,014
Ø55
031649
Slab Formwork
Column Formwork
1,5
Formwork Girders
Note
Safety Instructions
Cone, the tie rod must be shortened by 1.5 mm
on each side.
Ø 71
For sealing SK Anchor Cones DW 20 on the formwork side.
Ø 42
Item no. Weight kg
031648
0,008
Wall Formwork
Item no. Weight kg
031643
0,265
DK Concrete Cone UNI 58/52
DW 15/55, DW 20/55, DW 26/55 and SK Anchor
Cone DW 15.
Note
Ø 48
Ø58,5
52
0,401
SK Concrete Cone DW 20-67/60
For closing anchor points with SK Anchor Cone
DW 20.
Note
Ø 54
031650
Ø 67
Column Formwork
Wall Formwork
Formwork Girders
5,000
031651
0,881
Accessories
Glue for Concrete Cones-2 / 5 kg Set
SK Concrete Cone DW 26-100/60
For closing anchor points with SK Anchor Cone
DW 26.
Note
0,260
SK Lead Cone DW 15
For closing tie holes with SK Anchor Cone DW 15
for radiation-proof areas.
17,5
230
Ø40,2
104643
Accessories
Ø44,4
5,000
15
108136
Bridge- and
Tunnel Formwork
Working Platforms
60
Service
Ø80
Ø100
108136
Climbing Systems
Shoring Systems
Slab Formwork
60
20
Formwork Girders
Wall Formwork
Note
Ø 67,3
KK Concrete Cone M 24-67/52
For closing anchor points with Climbing Cone-2
M 24/DW 15.
Ø 40,2
Item no. Weight kg
031652
0,272
23,5
0,402
M30/DW 20.
Note
Slab Formwork
031653
Accessories
Ø 80,5
5,000
Ø 50,5
108136
Column Formwork
52
23,5
Note
Climbing Systems
M36/DW 26.
Working Platforms
0,571
23,5
52
108136
5,000
Accessories
For bonding PERI concrete cones.
Bridge- and
Tunnel Formwork
5,000
Note
Consisting of:
6 x Component A
6 x Component B
2 x Stirring Container
3 x Stirring staff
108136
.
231
Service
031654
Accessories
Ø90,5
5,000
Ø65,3
108136
Shoring Systems
52
Item no. Weight kg
108958
0,410
Glue Component A-2
110345
0,430
Glue Component B-2
114797
0,893
95
Formwork Girders
Wall Formwork
Column Formwork
0,940
DK Cone Remover UNI
For removing DK Sealing Cones.
30
327
0,383
100
Cone Spanner TRH
15
112
031644
031656
031657
0,580
0,600
0,660
DK, SK Tongs for Concrete Cones
For DK and SK Concrete Cones DW 15, SK
Concrete Cones DW 20 and KK Concrete Cones
M24 or SK Concrete Cones DW 26.
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
110634
296
Service
25
117
031655
Shoring Systems
Slab Formwork
560
232
Formwork Girders
Wall Formwork
Concrete Cone Gauge
Installation of concrete cones flush with
the surface.
114
Item no. Weight kg
101995
1,020
200
2,460
For a diverse range of uses.
Column Formwork
031480
0,560
Ratchet Wrench 1/2"
Climbing Systems
5,300
Ratchet Wrench 1"
Working Platforms
029610
Shoring Systems
300
0,580
Socket SW 46-1"
SW 46
029630
Bridge- and
Tunnel Formwork
900
233
Service
072180
Slab Formwork
510
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Item no. Weight kg
029650
0,160
234
Socket SW 27-1/2"
SW 27
Service
235
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
236
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
ASP Box-Out Form
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
238
238
238
238
238
238
238
238
238
238
238
238
238
238
238
238
240
240
240
240
240
239
239
239
239
239
239
239
239
239
239
239
238
238
238
238
Corner Reveal WD 20, 193.5 cm
Cutting Cost ASP
Double Head Nail l = 65 mm
Framing Member ASP, l = 2.50 m
Stiffening Panel ASP 60,0 x 125,0 cm
Striking Strip WD 20, 70-250/21
Striking Strip WD 20, 70/21
Vertical Reveal WD 20, 193.5 cm
237
Service
065103
065100
065101
065102
065109
065106
065107
065108
065115
065112
065113
065114
065121
065118
065119
065120
065130
018280
065124
065125
065126
065128
065129
065127
101856
065104
101857
065110
101859
065116
101861
065122
065105
065111
065117
065123
Formwork Girders
Wall Formwork
Column Formwork
ASP Box-Out Form
Item no. Weight kg
065100
065101
065102
065103
065106
065107
065108
065109
065112
065113
065114
065115
065118
065119
065120
065121
3,620
4,090
5,720
15,100
3,840
4,340
6,080
15,900
3,900
4,400
6,140
16,200
4,180
4,710
6,570
17,200
Corner Reveals WD
Box-outs for doors and windows.
L
427
490
705
1935
427
490
705
1935
427
490
705
1935
427
490
705
1935
B
200
200
200
200
240
240
240
240
250
250
250
250
300
300
300
300
B
065105
065111
065117
065123
14,700
15,500
15,700
16,700
Vertical Reveals WD
170
20
150
B
200
240
250
300
1935
Bridge- and
Tunnel Formwork
1915
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
L
20
Service
238
B
150
170
Formwork Girders
ASP Box-Out Form
Item no. Weight kg
Striking Strips WD
B
200
240
250
300
Wall Formwork
0,150
0,180
0,190
0,230
70
065104
065110
065116
065122
B
Column Formwork
21
Slab Formwork
B
200
240
250
300
Climbing Systems
B
74,5
125,0
150,0
Working Platforms
L
87,0
60,0
60,0
L
Bridge- and
Tunnel Formwork
Stiffening Panels ASP
6,660
7,730
9,300
21
B
065127
065128
065129
Shoring Systems
B
239
Service
Striking Strips WD
max 250
0,629
0,755
0,787
0,944
min 70
101856
101857
101859
101861
Item no. Weight kg
065124
065125
065126
13,700
16,400
19,100
Framing Member ASP
L
2500
3000
3500
Wall Formwork
Formwork Girders
ASP Box-Out Form
Shoring Systems
Slab Formwork
149
Column Formwork
L
150
065130
0,000
Cutting Cost ASP
For special lengths of striking fillets, vertical soffits
etc.
018280
1,000
Note
Delivery unit: carton with 1000 pieces.
75
65
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Ø3,1
240
Service
241
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
242
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
251
251
245
246
245
244
244
244
247
246
248
246
248
247
247
250
250
251
248
248
249
249
249
249
249
250
250
245
245
Chamfer Strip RAPID l = 3,0 m
Column Frame 210, Alu
Concreting Landing
Concreting Platform, compl.
Crane Hook Concreting Platform
Crane Lifting Unit-2 RAPID
End Ladder 180/2, galv.
Guardrail Landing 134, galv.
Kicker AV
Kicker AV 210
Kicker AV RSS III
Ladder 180/6, galv.
Ladder Base, galv.
Ladder Connector RAPID
Ladder Hook, galv.
Ladder Safety Cage 150, galv.
Spherical Nut DW 15, galv.
Tie Yoke DW 15
243
Service
103606
106000
037160
037190
037210
037260
037250
037270
037410
037400
037440
037320
103724
037430
037420
028110
108135
028120
051410
051460
103369
103718
051450
104132
028010
028020
028030
030440
037150
Item no. Weight kg
037250
61,400
Column Frame RAPID 300, Alu
Column frames for continuously adjustable crosssections up to 60 x 60. 21 mm plywood thickness.
With clamping profile for fixing the plywood without screws or nails.
Complete with
4 pc. 037160 Bolt Ø 20 x 205, galv.
4 pc. 037150 Tie Yoke DW 15
4 pc. 030440 Spherical Nut DW 15, galv.
2 pc. 710334 Nut ISO 4032-M20-8, galv.
800
250
Wall Formwork
64
500
238
60
M 20x50
654
80
120
Column Formwork
1000
500
3000
Formwork Girders
250
794
037260
44,800
Complete with
3 pc. 037160 Bolt Ø 20 x 205, galv.
2 pc. 710334 Nut ISO 4032-M20-8, galv.
800
250
794
Service
Complete with
1 pc. 037160 Bolt Ø 20 x 205, galv.
2 pc. 710334 Nut ISO 4032-M20-8, galv.
300
300
16,700
794
244
600
037270
Bridge- and
Tunnel Formwork
Working Platforms
2100
800
250
Climbing Systems
Shoring Systems
Slab Formwork
1000
Ø21
Item no. Weight kg
037150
0,641
Tie Yoke DW 15
For corner bracing of the RAPID column frames.
Technical Data
Permissible load 90 kN according to DIN 18216.
Formwork Girders
Complete with
125
Column Formwork
0,736
205
037160
Ø21
28
DW 15
Wall Formwork
42
315
Slab Formwork
Ø20
For corner bracing of RAPID with DW 15.
Shoring Systems
0,583
Note
Spanner size SW 27.
Technical Data
SW27
Climbing Systems
030440
Accessories
68
Working Platforms
For installing the plywood formlining on the RAPID
column frame.
3000
Bridge- and
Tunnel Formwork
34
0,320
25
037210
245
Service
0,030
110
018060
Item no. Weight kg
037190
3,010
to the RAPID column frame.
Complete with
1 pc. 037160 Bolt Ø 20 x 205, galv.
1 pc. 027170 Bolt Ø 16 x 42, galv.
Wall Formwork
Formwork Girders
165
DW 15
Ø16x42
20
Column Formwork
315
037320
16,200
For moving RAPID coulmn formwork.
Safety Instructions
Slab Formwork
500
Ø22
Ø18
250
Shoring Systems
798
123,000
Working and concreting platform for TRIO, RAPID
and QUATTRO Column Formwork.
Complete with
1 pc. 037410 Concreting Landing
2 pc. 037420 Guardrail Landing 52, galv.
3 pc. 037440 Crane Hook Concreting Platform
Bridge- and
Tunnel Formwork
1521
Working Platforms
Climbing Systems
037400
Service
1521
246
Formwork Girders
Concreting Landing, Alu
Continuously adjusts to all column cross-sections
up to max. 60 x 60 cm. Attachment is carried out
using the crane eye of the concreting platform.
Technical Data
Wall Formwork
Item no. Weight kg
037410
51,400
1524
130
1524
Column Formwork
840
1420
Ø21
620
Ø14
Climbing Systems
Bridge- and
Tunnel Formwork
1305
50
1340
Working Platforms
As guardrails for PERI concreting platforms. Locks
in place automatically.
1005
17,100
150
037430
50
247
Service
150
525
Shoring Systems
1005
10,200
1305
037420
Slab Formwork
710
Formwork Girders
Item no. Weight kg
037440
5,700
For assembling the concreting landing on the
RAPID and QUATTRO column frames.
Safety Instructions
120
508
Wall Formwork
137
DW 15
250
Column Formwork
70
11,700
Ladder 180/6, galv.
As access for PERI formwork systems.
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Slab Formwork
051410
5 x 298 = 1490
83
Shoring Systems
1960
2,180
Ladder Base, galv.
As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
210
Climbing Systems
051460
103724
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
298
1200
1885
Service
10,400
50
450
Bridge- and
Tunnel Formwork
Working Platforms
405
248
Formwork Girders
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Wrench size SW 18.
Wall Formwork
Ladder Hook, galv.
For adjusting the bottom ladder. Always use in
pairs.
330
Item no. Weight kg
103718
0,684
Column Formwork
SW 18
Shoring Systems
230
178
195
50
Slab Formwork
Complete with
2 pc. 701763 Clamping Plate Fl 25 x 10 x 90
469
661
15,600
25,200
Ladder Safety Cages
Ladder safety cage for PERI access ladders.
Complete with
Climbing Systems
104132
051450
Working Platforms
Bridge- and
Tunnel Formwork
Note
min 2050
max 2940
Ø32
Ø16,5
Ø16,5
1915
10
Ø 70
17,800
15
028010
704
750 / 1500
710
249
Ladder Connector RAPID, galv.
For connecting ladders to RAPID column frames.
Service
6,400
260
103369
Formwork Girders
Item no. Weight kg
028020
21,900
Note
Wall Formwork
min 2910
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
38,400
Note
Slab Formwork
028030
min 4600
4399
16,5
Kicker AV
9
15
Shoring Systems
5,180
Climbing Systems
028110
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1080
max 1400
Ø 38
Working Platforms
Ø30
Ø16x42
Ø16,5
10
10
980
108135
13,000
Kicker AV 210
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
max 2100
Ø36
Ø 70
Ø16x42
Ø16,5
10
1171
250
10
Bridge- and
Tunnel Formwork
Ø 82,5
Ø48,3
16,5
Service
max 6000
Formwork Girders
Kicker AV RSS III
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 2030
Wall Formwork
Item no. Weight kg
028120
16,900
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
85
Ø11
Climbing Systems
Note
Wrench size SW 30.
SW 30
MMS 20
138
Working Platforms
props, bracing etc.
Bridge- and
Tunnel Formwork
0,330
103606
100
12
Ø21
150
Column Formwork
Slab Formwork
Base Plate-2 for RSS, galv.
Shoring Systems
1,820
251
Service
106000
10
10
1915
Service
252
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
255
261
256
256
256
255
255
255
255
257
257
256
258
259
256
258
258
261
261
261
258
259
259
259
260
260
260
260
260
255
254
254
255
257
Base Plate QUATTRO QB
Brace Connector QR
Chamfer Strip QDL 125
Concreting Landing
Frame Spanner QUATTRO QA
Kicker AV
Kicker AV 210
Kicker AV RSS III
Ladder 180/6, galv.
Ladder Base, galv.
Ladder Connector QUATTRO
Ladder Hook, galv.
QUATTRO Frame QES 125
Transportation Wheel QUATTRO
253
Service
037550
106000
105400
724500
037530
037600
037610
105448
037590
037410
037400
018060
037440
103724
037540
037430
037420
028110
108135
028120
051410
051460
103391
103718
051450
104132
028010
028020
028030
109924
109925
109926
109923
105791
Item no. Weight kg
109926 206,000
Column panel with 20 mm plywood, screwed on
from the rear. For cross-sections in 5 cm increments from 20 x 20 cm to 60 x 60 cm. Eye bolt
as load-bearing point and for extensions. Without
chamfer strip.
Complete with
2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv.
2 pc. 710045 Nut DIN 557-4 M20, galv.
13 pc. 105400 Bolt Ø 20 x 140, galv.
1 pc. 037550 Base Plate QUATTRO QB
Safety Instructions
Column Formwork
Wall Formwork
Formwork Girders
Shoring Systems
693
Slab Formwork
3500
835
725
158,000
chamfer strip.
Complete with
2 pc. 710045 Nut DIN 557-4 M20, galv.
9 pc. 105400 Bolt Ø 20 x 140, galv.
1 pc. 037550 Base Plate QUATTRO QB
Safety Instructions
Bridge- and
Tunnel Formwork
2750
Working Platforms
Climbing Systems
109925
Service
725
725
254
Column Formwork
Complete with
2 pc. 710045 Nut DIN 557-4 M20, galv.
2 pc. 105400 Bolt Ø 20 x 140, galv.
Safety Instructions
L
3500
2750
1250
500
Working Platforms
Chamfer Strips QDL
Plastic chamfer strip with nailing panel. Edge
length 15 x 15 mm.
L
Bridge- and
Tunnel Formwork
0,665
0,520
0,230
0,100
20 15
105448
037610
037600
037590
Climbing Systems
725
2,7
Complete with
530
DW 15
100
For protecting the plywood formlining against
damage.
3°
3,240
15
037550
Slab Formwork
chamfer strip.
500
32,300
Shoring Systems
725
109923
Formwork Girders
Complete with
2 pc. 710045 Nut DIN 557-4 M20, galv.
5 pc. 105400 Bolt Ø 20 x 140, galv.
Safety Instructions
725
80
255
Service
chamfer strip.
1250
Item no. Weight kg
109924
73,800
Wall Formwork
Item no. Weight kg
037540
2,370
For bracing QUATTRO column elements. Only
required on a column corner.
Note
Required no. of pieces:
h = 3.50 m 6 pieces, h = 2.75 m 4 pieces
h = 1.25 m 2 pieces, h = 0.50 m 1 piece
45
Wall Formwork
Ø21
DW 15
Column Formwork
57
249
89
Formwork Girders
195
1,140
Brace Connector QR
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
155
Slab Formwork
037530
724500
0,098
42
018060
0,030
105400
0,330
Accessories
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Ø5
Service
93
20
Shoring Systems
24
140
89
Ø8
Ø20
018060
0,030
018060
0,030
Accessories
Ø4
256
Formwork Girders
Technical Data
Bearing capacity 500 kg.
Wall Formwork
For moving completely assembled QUATTRO
column formwork. Always use 4 pieces per
column.
464
Working and concreting platform for TRIO -, RAPID
Complete with
Slab Formwork
123,000
135
Shoring Systems
1521
037400
Column Formwork
642
Item no. Weight kg
105791
16,900
Working Platforms
Technical Data
1524
Bridge- and
Tunnel Formwork
130
Ø21
Ø14
710
257
Service
1420
840
Concreting Landing
1524
51,400
620
037410
Climbing Systems
1521
1005
150
Column Formwork
1305
525
17,100
Shoring Systems
150
1005
Slab Formwork
037430
50
1340
5,700
Climbing Systems
037440
Safety Instructions
120
508
Working Platforms
Bridge- and
Tunnel Formwork
50
137
250
70
051410
11,700
Ladder 180/6, galv.
DW 15
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Service
1305
Item no. Weight kg
037420
10,200
Wall Formwork
Formwork Girders
5 x 298 = 1490
1960
258
83
Formwork Girders
Ladder Base, galv.
405
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
Column Formwork
10,400
50
450
103724
Wall Formwork
210
Item no. Weight kg
051460
2,180
Slab Formwork
1200
Working Platforms
For connecting ladders to QUATTRO column
panels.
Complete with
160
4,890
SW 18
750
260
103391
Climbing Systems
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Wrench size SW 18.
Bridge- and
Tunnel Formwork
Ladder Hook, galv.
pairs.
0,684
330
103718
Shoring Systems
1885
453
259
Service
298
Item no. Weight kg
104132
051450
15,600
25,200
Ladder Safety Cages, galv.
Complete with
Wall Formwork
750 / 1500
710
Column Formwork
704
Formwork Girders
17,800
Note
Slab Formwork
028010
min 2050
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
1915
21,900
Climbing Systems
028020
Note
min 2910
max 3800
Ø 70
Ø32
38,400
10
15
028030
Note
min 4600
Service
Ø16,5
2775
max 6000
Ø48,3
260
4399
16,5
9
15
16,5
Ø 82,5
Bridge- and
Tunnel Formwork
Working Platforms
Ø16,5
Formwork Girders
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1080
Wall Formwork
Kicker AV
max 1400
Ø 38
Ø30
Ø16x42
Ø16,5
10
10
13,000
Kicker AV 210
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
Slab Formwork
108135
Column Formwork
980
max 2100
Ø 70
Ø36
Ø16x42
Ø16,5
10
10
1171
16,900
Kicker AV RSS III
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 2030
Climbing Systems
028120
Shoring Systems
Item no. Weight kg
028110
5,180
max 2920
Ø16x42
Ø16,5
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Ø11
Ø21
150
100
261
Service
85
1,820
12
106000
Bridge- and
Tunnel Formwork
10
10
1915
Working Platforms
Ø 70
Ø32
Service
262
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
266
273
272
266
266
264
264
264
265
268
268
269
270
269
269
265
272
272
272
269
270
270
271
271
266
267
267
267
265
271
271
271
268
267
270
265
265
Chamfer Strip 15/15 l = 2.70 m
Column Panel TRS 120 x 90
Column Tie Bolt TRIO, galv.
Concreting Landing
Inserting Nut, compl.
Kicker AV
Kicker AV 210
Kicker AV RSS III
Ladder 180/6, galv.
Ladder Base, galv.
Ladder Hook, galv.
Lifting Gear-3 TRIO
Lifting Pin TRIO
Plug Ø 25 mm for TRS
Stacking Device TRIO, galv.
TRIO Ladder connection
TRS clamp DW 15, galv.
263
Service
023500
103606
106000
023660
054240
054210
054200
054220
054230
037410
037400
037440
103724
037430
037420
103721
028110
108135
028120
051410
051460
103718
051450
104132
044760
044770
023690
023440
030320
028010
028020
028030
750303
023390
103362
103716
030370
120
15 x 50 = 750
120
1200
75
Accessories
Column panels for cross-sections up to
75 x 75 cm in 5 cm increments. 18 mm Fin-Ply
formlining.
030370
054230
264
1,560
0,584
Accessories
75
120
600
350
250
Bridge- and
Tunnel Formwork
75
900
900
Service
2700
350
600
800
40,300
1550
600
350
358
484
358
054220
15 x 50 = 750
Column panels for cross-sections up to 75x75 cm
in 5 cm increments. 18 mm Fin-Ply formlining.
25 550 25
Climbing Systems
1,560
0,584
Working Platforms
030370
054230
75
75
25
69,900
15 x 50 = 750
Accessories
850
054210
900
75
575
Wall Formwork
Slab Formwork
1,560
0,584
Shoring Systems
030370
054230
575
Column panels for cross-sections up to 75x75 cm
in 5 cm increments. 18 mm Fin-Ply formlining.
325
Item no. Weight kg
054200 142,000
Column Formwork
Formwork Girders
Formwork Girders
For corner bracing of the TRIO column elements.
Complete with
1 pc. 103715 Bolt 14 x 160, galv.
75
160
40
Item no. Weight kg
103721
0,823
Wall Formwork
Ø14
103716
2,200
Column Formwork
118
Slab Formwork
DW 15
Ø19
266
117
054230
0,584
Shoring Systems
338
Note
Wrench size SW 30.
283
19
100
DW 15
Climbing Systems
1,560
Technical Data
117
Working Platforms
030370
SW 30
72
For closing unused tie holes Ø 25 mm and with
TRIO column formwork.
21
265
Service
23
0,004
25
030320
Bridge- and
Tunnel Formwork
110
Ø10
67
Column Formwork
2700
4,350
Slab Formwork
023500
Technical Data
61
Shoring Systems
164
max 220
288
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
222
044760
Service
Bridge- and
Tunnel Formwork
Working Platforms
169
185
3,310
Climbing Systems
023660
259
26,100
For transporting stacks of MAXIMO and TRIO elements. For attaching Lifting Hook TRIO 1.5 t and
stacking devices.
Safety Instructions
350 0
266
144
For TRIO column formwork and on external corners. Edge length 15 x 15 mm.
115
Item no. Weight kg
054240
1,900
Wall Formwork
Formwork Girders
Formwork Girders
Lifting Gear-3 TRIO
elements.
Safety Instructions
Wall Formwork
Item no. Weight kg
044770
15,600
Column Formwork
35 0 0
Note
Safety Instructions
Load-carrying capacity with crane sling
angle ≤ 30°:
Steel element 1.5 t.
Aluminium element 750 kg.
60
208
523
80
Slab Formwork
Shoring Systems
7,050
112
023690
023440
0,312
Lifting Pin TRIO
For easy carrying of TRIO elements.
Safety Instructions
Load-bearing capacity 1.5 t.
Working Platforms
7,060
Bridge- and
Tunnel Formwork
150
260
267
Service
18
100
790
023390
100
Climbing Systems
184
56
037400
123,000
Working and concreting platform for TRIO, RAPID
Complete with
Shoring Systems
1521
Slab Formwork
Column Formwork
25
22
Item no. Weight kg
750303
0,022
Wall Formwork
Formwork Girders
1521
Climbing Systems
037410
51,400
Concreting Landing
Technical Data
1524
130
1524
840
Working Platforms
1420
Ø21
Bridge- and
Tunnel Formwork
620
Ø14
Service
710
268
Formwork Girders
525
Wall Formwork
Shoring Systems
120
508
137
Climbing Systems
Safety Instructions
Working Platforms
11,700
Ladder 180/6, galv.
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
051410
DW 15
Bridge- and
Tunnel Formwork
250
70
5 x 298 = 1490
83
1960
269
5,700
50
Service
150
1340
037440
Slab Formwork
1005
17,100
50
1305
037430
Column Formwork
150
1005
1305
Item no. Weight kg
037420
10,200
Ladder Base, galv.
210
Item no. Weight kg
051460
2,180
405
103724
10,400
50
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Column Formwork
Wall Formwork
Formwork Girders
103718
0,684
Ladder Hook, galv.
pairs.
330
7,120
For connecting ladders to TRIO Column Panel TRS.
SW 18
Complete with
216
50
Ø20
921
469
270
SW 18
251
Working Platforms
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Wrench size SW 18.
Bridge- and
Tunnel Formwork
103362
Service
1200
1885
Climbing Systems
Shoring Systems
Slab Formwork
298
Formwork Girders
Item no. Weight kg
15,600
25,200
Complete with
Wall Formwork
104132
051450
Column Formwork
704
750 / 1500
710
17,800
Note
min 2050
Slab Formwork
028010
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
1915
min 2910
Climbing Systems
Note
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Bridge- and
Tunnel Formwork
Note
min 4600
max 6000
Ø48,3
16,5
4399
16,5
9
Ø 82,5
38,400
15
028030
10
15
2775
Working Platforms
271
21,900
Service
028020
Item no. Weight kg
028110
5,180
Kicker AV
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
Wall Formwork
min 1080
max 1400
Ø30
Ø 38
Formwork Girders
Ø16x42
Ø16,5
10
10
Column Formwork
980
13,000
Kicker AV 210
Slab Formwork
108135
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
max 2100
Ø 70
Ø36
Shoring Systems
Ø16x42
Ø16,5
10
10
1171
16,900
Climbing Systems
028120
Kicker AV RSS III
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 2030
max 2920
Ø 70
Working Platforms
Ø32
Ø16x42
10
10
Bridge- and
Tunnel Formwork
1,820
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
85
Ø11
Ø21
272
100
12
106000
150
Service
Ø16,5
1915
Formwork Girders
Wall Formwork
Note
Wrench size SW 30.
SW 30
MMS 20
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
138
props, bracing etc.
273
Service
Item no. Weight kg
103606
0,330
Service
274
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
279
277
277
276
276
276
278
278
278
279
279
277
277
278
279
277
Brace Connector QR
Chamfer Strip LICO I = 3.00 m
Column Panel LICO 700 x 1000
Concreting Platform LICO
Concreting Platform LICO, Cover
Concreting Platform LICO, Frame
Kicker AV
Kicker AV 210
Lifting Pin LICO
Plug Ø 20 mm
Spanner LICO
275
Service
106000
037530
111975
111957
111683
111964
115894
115896
115895
028110
108135
115019
030290
028010
028020
116432
Item no. Weight kg
111683
72,600
Column panels für cross-sections up to
20 x 20 cm to 60 x 60 cm in 5 cm increments.
12 mm Fin-Ply formlining.
Wall Formwork
Formwork Girders
Complete with
4 pc. 111679 Column Tie Nut LICO DW 15
4 pc. 111682 Column Tie Bolt LICO DW 15
2 pc. 710130 Loop Bolt M20 x 40, galv.
2 pc. 781053 Nut ISO 7042 M20-8, galv.
48 pc. 030290 Plug Ø 20 mm
11 x 50 = 550
60
3000
250
698
111957
29,100
Complete with
2 pc. 781053 Nut ISO 7042 M20-8, galv.
24 pc. 030290 Plug Ø 20 mm
500
250
1000
250
Climbing Systems
Shoring Systems
Slab Formwork
750
750
Column Formwork
750
80
500
88
Complete with
2 pc. 781053 Nut ISO 7042 M20-8, galv.
12 pc. 030290 Plug Ø 20 mm
250 250
698
Service
16,800
276
500
111964
Bridge- and
Tunnel Formwork
Working Platforms
698
Formwork Girders
Wall Formwork
For attaching to the LICO column panels.
100
Item no. Weight kg
111975
1,080
Column Formwork
28
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Slab Formwork
Brace Connector QR
Lifting Pin LICO
Climbing Systems
Plug Ø 20 mm
required.
Note
Working Platforms
0,002
Ø21
030290
260
Ø25
0,334
Q20
115019
93
Shoring Systems
24
Spanner LICO
For tying LICO column formwork.
106
0,957
Ø45
70
116432
Bridge- and
Tunnel Formwork
13
376
277
Service
1,140
155
037530
Item no. Weight kg
115894
22,900
Working and concreting platform for LICO column
formwork.
Technical Data
680
940
130
870
3,520
115895
17,600
Accessories
Guardrail Post HSGP
Working and concreting platform for LICO column
formwork. Decking by customer.
Technical Data
870
Shoring Systems
130
680
940
670
034580
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
5,270
Climbing Systems
115896
680
640
21
780
028010
17,800
Note
Service
min 2050
max 2940
Ø32
Ø 70
Ø16,5
Ø16,5
15
1915
278
10
Bridge- and
Tunnel Formwork
Working Platforms
480
Ø9
Formwork Girders
Note
min 2910
max 3800
Wall Formwork
Item no. Weight kg
028020
21,900
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
5,180
Kicker AV
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1080
Slab Formwork
028110
max 1400
Ø 38
Ø30
Ø16,5
Shoring Systems
Ø16x42
10
10
980
13,000
Kicker AV 210
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
Climbing Systems
108135
max 2100
Ø16,5
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Ø11
85
1,820
Ø21
150
100
12
106000
Bridge- and
Tunnel Formwork
10
10
1171
Working Platforms
Ø16x42
279
Service
Ø 70
Ø36
Service
280
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
289
289
284
283
282
282
286
286
287
284
284
282
288
289
289
286
286
287
287
287
287
288
288
288
285
282
282
282
282
283
283
285
285
283
282
284
Column Waler SSRZ-U120, spec. length
Kicker AV
Kicker AV 210
Kicker AV RSS III
Ladder 180/6, galv.
Ladder Base, galv.
Ladder Connector VARIO, adjustable
Ladder Hook, galv.
Steel Waler SSRZ U-100. Spec. Length
Steel Waler SSRZ-24 U-100 l = 0.97/0.85 m
Steel Waler SSRZ-24 U-100 l = 1,13/1,01 m
Steel Waler SVRZ U-100 l = 1.20 m
Tie Yoke SKZ
Wedge K, galv.
Wedge KZ, galv.
Welding Unit for SSRZ
281
Service
103606
106000
037160
031200
012040
012090
027070
027060
103724
028050
028070
024070
028110
108135
028120
051410
051460
111165
103718
051450
104132
028010
028020
028030
027110
012080
012150
012160
012050
030010
024210
028060
024250
024240
012300
030100
Item no. Weight kg
012150
012160
38,700
45,700
Steel Walers SSRZ-24 U100
For continuously adjustable column cross-sections
24 x 24 cm up to 48 x 60 cm or 40 x 40 cm up to
64 x 76 cm. Profile U100.
Note
Special lengths and other profile sizes available on
request.
175
Column Formwork
852 / 1012
Wall Formwork
Formwork Girders
22,000
28,000
33,000
0,000
012050
31,300
52
Steel Walers SSRZ, Special Length
Steel Waler SSRZ U-100, Spec. Length
Note
Special lengths and other profile sizes available on
request.
300
For continuously adjustable column cross-sections
up to 80 x 120 cm in connection with Steel Waler
SRU. Profile U100.
Ø21
1274
103871
103874
103877
103886
037160
024240
24,200
30,900
38,100
44,700
0,736
0,805
024070
0,460
Bridge- and
Tunnel Formwork
Working Platforms
300
Accessories
Steel Waler Universal
Wedge KZ, galv.
SRU
SRU
SRU
SRU
U-120
U-120
U-120
U-120
l
l
l
l
=
=
=
=
Note
Non-weldable!
Technical Data
M 8x70
162 (U 120)
282
52
152
0.97 m
1.22 m
1.47 m
1.72 m
152 (U 100)
Service
375
012080
012040
012090
012300
Climbing Systems
Shoring Systems
Slab Formwork
972 / 1132
82
Formwork Girders
15
20
15
2500
Tie Yoke SKZ
For tensioning on external corners with Steel
Waler SRZ, SRU, U100 - U140 and VARIO couplings.
Column Formwork
2,180
146
024210
Wall Formwork
Item no. Weight kg
031200
0,470
0,805
Slab Formwork
Ø18
Wedge KZ, galv.
For connecting panels with VARIO Couplings or Tie
Yoke SKZ.
47
024240
48
Shoring Systems
161
20
Climbing Systems
254
Working Platforms
Note
Non-weldable!
Technical Data
DW 15
Bridge- and
Tunnel Formwork
1,220
283
Service
030010
Item no. Weight kg
030100
0,438
Note
Wrench size SW 27.
Technical Data
Wall Formwork
50
34
SW 27
110
Formwork Girders
Column Formwork
DW 15
0,736
Complete with
205
125
Ø20
018060
0,030
028050
4,550
Climbing Systems
Accessories
to GT 24 girders
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
145
Service
4,680
40 min 40
170
028070
Bridge- and
Tunnel Formwork
Working Platforms
14
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
145
14
40
170
min 52
max 100
Shoring Systems
Slab Formwork
037160
284
Formwork Girders
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
48
100
14
24
U100
U120
Wall Formwork
82
Item no. Weight kg
028060
1,910
Wedge K, galv.
Slab Formwork
0,331
Ø8
Technical Data
35
Climbing Systems
65
1050
899
66
757
Working Platforms
Ø7
85
Bridge- and
Tunnel Formwork
180
600
with VARIO GT 24.
120
11,000
460
027110
8
20
208
Shoring Systems
024250
Accessories
Wedge K, galv.
285
Service
0,331
35
024250
Column Formwork
U140
Item no. Weight kg
027060
027070
14,100
14,000
Note
24-80 R.
Technical Data
120
Wall Formwork
Formwork Girders
Column Formwork
1050
460
35
72
9
85
Slab Formwork
600
1274
11,700
Ladder 180/6, galv.
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
051410
5 x 298 = 1490
1960
Ladder Base, galv.
405
Service
2,180
210
051460
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Ø7
286
50
83
Formwork Girders
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Item no. Weight kg
103724
10,400
298
1200
Wall Formwork
Column Formwork
1885
Ladder Hook, galv.
pairs.
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Spanner Size SW 18.
Slab Formwork
0,684
330
103718
Shoring Systems
SW 18
For connecting ladders to Steel Walers SRZ and
SRU, Profile U100 - U120.
Complete with
Climbing Systems
6,080
90
111165
293
Working Platforms
835
min 0
max 111
Complete with
710
704
15,600
25,200
750 / 1500
104132
051450
Bridge- and
Tunnel Formwork
454
287
Service
U100 / U120
Formwork Girders
Item no. Weight kg
028010
17,800
Note
Wall Formwork
min 2050
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
1915
21,900
Note
Slab Formwork
028020
min 2910
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
2775
38,400
Climbing Systems
028030
min 4600
16,5
Ø 82,5
Working Platforms
4399
16,5
5,180
Kicker AV
9
15
028110
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1080
max 1400
Ø 38
Ø30
Ø16x42
Ø16,5
288
10
980
10
Service
max 6000
Ø48,3
Bridge- and
Tunnel Formwork
Note
Formwork Girders
Kicker AV 210
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
Wall Formwork
Item no. Weight kg
108135
13,000
max 2100
Ø 70
Ø36
Ø16x42
Ø16,5
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 2030
Slab Formwork
Kicker AV RSS III
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Climbing Systems
1,820
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
85
Ø11
Working Platforms
106000
10
10
1915
props, bracing etc.
Bridge- and
Tunnel Formwork
0,330
Note
Wrench size SW 30.
SW 30
103606
100
12
Ø21
150
Shoring Systems
16,900
MMS 20
138
289
Service
028120
Column Formwork
10
10
1171
Service
290
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
SRS Column Formwork
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
292
297
297
293
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
293
294
294
293
296
296
297
294
294
295
295
295
295
295
296
296
Adapter Strip SRS-TRIO l = 3,00 m
Circular Column Landing 25-70
Circular Column Panel Ø 25 cm h = 0.3 m
Circular Column Platform 25-70, compl.
Exit Handrail Post SRS 134
Kicker AV
Kicker AV 210
Kicker AV RSS III
Ladder 180/6, galv.
Ladder Base, galv.
Ladder Connector SRS
Ladder Hook, galv.
291
Service
045200
103606
106000
045211
045010
045011
045012
045013
045020
045021
045022
045023
045030
045031
045032
045033
045040
045041
045042
045043
045050
045051
045052
045053
045060
045061
045062
045063
045210
103724
103417
037430
028110
108135
028120
051410
051460
103374
103718
051450
104132
028010
028020
028030
Formwork Girders
Wall Formwork
Column Formwork
Item no. Weight kg
045010
045011
045012
045013
045020
045021
045022
045023
045030
045031
045032
045033
045040
045041
045042
045043
045050
045051
045052
045053
045060
045061
045062
045063
23,200
63,000
98,900
120,000
25,200
67,700
107,000
130,000
26,400
71,500
114,000
139,000
28,400
76,300
123,000
150,000
31,000
82,000
132,000
161,000
32,800
86,500
140,000
171,000
Circular Column Panels
Circular column panel made of steel. With captive
column bolt.
B
X
Y
620
290
200
620
290
200
620
290
200
620
290
200
670
310
210
670
310
210
670
310
210
670
310
210
720
340
210
720
340
210
720
340
210
720
340
210
770
360
230
770
360
230
770
360
230
770
360
230
820
390
250
820
390
250
820
390
250
820
390
250
870
410
240
870
410
240
870
410
240
870
410
240
Note
Item no. and weight are per column element (halfshell).
Safety Instructions
h
Climbing Systems
X Y Y
Shoring Systems
Slab Formwork
SRS Column Formwork
B
045200
Service
Bridge- and
Tunnel Formwork
Working Platforms
Ø
4,070
For connecting SRS circular column elements with
TRIO panel formwork. Made of aluminium.
3000
110
18
292
Formwork Girders
SRS Column Formwork
Item no. Weight kg
045210 139,000
Working and concreting platform for SRS Steel
Circular Column Ø 25 cm up to 70 cm.
Complete with
1 pc. 045211 Circular Column Landing 25-70
Fits every circular column cross-section from
Ø 25 cm to 70 cm in 5 cm increments.
Technical Data
Shoring Systems
66,800
1554
Working Platforms
Bridge- and
Tunnel Formwork
1340
50
1005
1305
17,100
213
150
037430
Climbing Systems
1472
130
293
Service
045211
Slab Formwork
Column Formwork
Wall Formwork
.
Item no. Weight kg
051410
11,700
Ladder 180/6, galv.
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Wall Formwork
Formwork Girders
SRS Column Formwork
5 x 298 = 1490
83
Column Formwork
1960
2,180
Ladder Base, galv.
210
405
10,400
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
298
14,100
For circular column landings 25-70. 1 for each
access.
1005
150
1305
103417
Service
1200
1885
Bridge- and
Tunnel Formwork
Working Platforms
50
450
103724
Climbing Systems
Shoring Systems
Slab Formwork
051460
550
1340
294
50
Formwork Girders
SRS Column Formwork
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Spanner Size SW 18.
Wall Formwork
Ladder Hook, galv.
pairs.
330
Item no. Weight kg
103718
0,684
Column Formwork
SW 18
Complete with
Slab Formwork
For connecting ladders to SRS circular column elements up to Ø 70 cm.
992
15,600
25,200
50
Complete with
Climbing Systems
104132
051450
Shoring Systems
469
450
Working Platforms
Bridge- and
Tunnel Formwork
Note
min 2050
max 2940
Ø32
Ø16,5
Ø16,5
1915
10
Ø 70
17,800
15
028010
704
750 / 1500
710
295
9,860
Service
103374
Formwork Girders
SRS Column Formwork
Item no. Weight kg
028020
21,900
Note
Wall Formwork
min 2910
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
38,400
Note
Slab Formwork
028030
min 4600
4399
16,5
Kicker AV
9
15
Shoring Systems
5,180
Climbing Systems
028110
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1080
max 1400
Ø 38
Working Platforms
Ø30
Ø16x42
Ø16,5
10
10
980
108135
13,000
Kicker AV 210
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 1280
max 2100
Ø36
Ø 70
Ø16x42
Ø16,5
10
1171
296
10
Bridge- and
Tunnel Formwork
Ø 82,5
Ø48,3
16,5
Service
max 6000
Formwork Girders
SRS Column Formwork
Kicker AV RSS III
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Note
min 2030
Wall Formwork
Item no. Weight kg
028120
16,900
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
85
Ø11
Climbing Systems
Note
Wrench size SW 30.
SW 30
MMS 20
138
Working Platforms
props, bracing etc.
Bridge- and
Tunnel Formwork
0,330
103606
100
12
Ø21
150
Column Formwork
Slab Formwork
Shoring Systems
1,820
297
Service
106000
10
10
1915
Service
298
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
307
307
302
301
301
301
301
302
301
301
304
305
303
303
306
306
301
300
300
308
307
308
304
300
300
300
300
300
300
304
305
305
306
302
309
309
304
305
308
303
303
307
303
Anchor Chain 3,0 kN l = 2.5 m
Combihead SCK
Cover Strip SAL 150
Cover Strip SAL 37.5
Cover Strip SAL 50
Cover Strip SAL 75
Drophead SFK
Edge Beam SRT-2 150
Edge Beam SRT-2 75
End Support SSL
Erection Aid SSH, Alu
Filler Timber SPH 150
Guardrail Holder SGH, Alu
Guardrail Post SGP
Main Beam SLT 150
Main Beam SLT 225
Main Beam SLT 375
Pallet Lifting Trolley 1500 mm
Pallet SD 150 x 225, galv.
Panel Clip SPK
Panel SDP 150 x 37.5
Panel SDP 150 x 50
Panel SDP 150 x 75
Panel SDP 75 x 37.5
Panel SDP 75 x 50
Panel SDP 75 x 75
Panel Wedge Clip SPKK
Platform SDB 150
Platform SDB 225
Platform SDB 300
Prophead SSK
Stripping Cart ASW 465, compl.
Stripping Cart, Alu
Table Connector STV
Tension Sleeve SAO
Transportation Fork SUG, galv.
Triangular Frame SDR 150 x 75
Turnbuckle 3.0 kN, M 12
Wall Holder SWH-2
299
Service
065073
028100
061180
061026
061038
061024
061027
061210
061045
061046
061023
061300
061049
061036
061250
061260
061110
061100
061160
061510
061530
061500
061290
061020
061011
061000
061030
061013
061010
061280
061060
061061
061062
061200
102031
035500
061052
061310
061520
061021
061022
065074
061051
061000
061011
061020
061010
061013
061030
15,500
11,700
9,780
8,560
6,350
5,250
Panels SDP
Panel SDP 150 x 75
Panel SDP 150 x 50
Panel SDP 75 x 75
Panel SDP 75 x 50
Panel SDP 75 x 37.5
L
1500
1500
1500
750
750
750
B
750
500
375
750
500
375
Slab Formwork
B
99
21
L
120
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
061160
25,500
Main Beam SLT 375
For cantilevers.
Shoring Systems
240
3750
1042
450
750
375
375
450
300
750
450
300
82
061100
15,500
266
Main Beam SLT 225
For standard fields.
Working Platforms
Climbing Systems
12
300
1042
240
2250
2244
450
375
375
Bridge- and
Tunnel Formwork
12
300
Service
82
300
266
Formwork Girders
Item no. Weight kg
061110
9,690
Main Beam SLT 150
For filler areas.
190
Wall Formwork
1500
1494
1120
190
12
190
Column Formwork
80
1,690
0,849
0,561
0,427
Cover Strips SAL
Cover Strip SAL 150
Cover Strip SAL 75
Cover Strip SAL 50
Plastic. Panel with 21 mm plywood. For use with
drophead SFK.
L
1500
750
500
375
Slab Formwork
061026
061027
061024
061038
Shoring Systems
L
Climbing Systems
Working Platforms
Edge Beams SRT-2
Edge Beam SRT-2 150
Edge Beam SRT-2 75
For longitudinal and transverse filling, for shuttering around columns. Panel with 21 mm plywood.
1500 / 750
Bridge- and
Tunnel Formwork
1488 / 738
49
301
Service
5,740
2,720
98
061045
061046
53
22
78
Item no. Weight kg
061210
6,180
Drophead SFK
With self-locking coupling. Supports main beam as
well as cover strip and formlining. Lowering height
6 cm. For 21 mm plywood formlining.
Wall Formwork
Formwork Girders
250
60
061200
3,860
Prophead SSK
With self-locking coupling. Supports main beams,
panels, edge girders and filler timber.
061180
5,340
Combihead SCK
With self-locking coupling. Supports main beams,
panels, edge girders and filler timber.
Service
250
Bridge- and
Tunnel Formwork
305
302
250
161
259
50
260
50
161
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
549
390
258
40
Formwork Girders
Item no. Weight kg
3,350
5,020
Filler Timbers SPH
For compensations with 21 mm plywood
formlining.
Wall Formwork
061049
061036
1500 / 2250
98
Column Formwork
49
Triangular Frames SDR
For compensations on inclined walls. For compensations with 21 mm plywood formlining.
1500 / 750
750
Shoring Systems
98
Slab Formwork
8,650
5,340
Bridge- and
Tunnel Formwork
100
202
Working Platforms
Climbing Systems
Wall Holder SWH-2
For horizontal anchoring on the wand. Attach to
every second girder or panel.
1102
5,250
1490
061051
303
Service
061021
061022
End Support SSL
For the transition to compensation. Connecting to
Drophead SKF.
102
160
Item no. Weight kg
061023
2,140
Wall Formwork
Formwork Girders
86
Column Formwork
165
0,133
Panel Clip SPK
Fixes panel on main beam.
121
50
061280
0,780
33
Fixes panel on main beam.
116
061052
Working Platforms
Climbing Systems
116
Shoring Systems
Slab Formwork
061290
Table Connector STV
For assembling SKYDECK Slab Tables. Also allows
the fixing of intermediate props on the main
beam.
86
Bridge- and
Tunnel Formwork
70
330
Service
2,590
80
304
Formwork Girders
Erection Aid SSH
For forming with SKYDECK. Adjustable in 7.5 cm
increments.
Wall Formwork
Item no. Weight kg
061300
2,240
Column Formwork
2325 - 3750
Shoring Systems
Technical Data
1288
Platform SDB 225
Work and safety scaffold. Scaffold width 1.30 m.
With continuous 39 mm thick decking and foldable
handrail frame.
Technical Data
Bridge- and
Tunnel Formwork
153,000
061061
1433
Working Platforms
1490
2240
305
Service
Platform SDB 150
handrail frame.
1006
108,000
70
Climbing Systems
143
061060
Slab Formwork
Technical Data
1220
Tension Sleeve SAO
For bracing cantilevered main beams.
62
0,996
125
061310
Item no. Weight kg
061062 185,000
Platform SDB 300
handrail frame.
Technical Data
2990
061250
4,760
For assembling a guardrail with SKYDECK.
1500
300
061260
6,150
061260
6,150
Accessories
Guardrail Post SGP
Guardrail Post SGP
35
306
65
1438
1768
433
433
Bridge- and
Tunnel Formwork
120
Working Platforms
Climbing Systems
1640
Service
368
245
300
Shoring Systems
5
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Anchor Chain 3.0 kN l = 2.5 m
Technical Data
Wall Formwork
15
Item no. Weight kg
065073
1,370
2500
Technical Data
16
Column Formwork
0,450
1,830
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
85
Ø13
Shoring Systems
028100
max 300
Slab Formwork
min 220
90
150
Working Platforms
Climbing Systems
Complete with
5 pc. 100707 Lashing 25 x 5750 mm
Safety Instructions
2110
Bridge- and
Tunnel Formwork
For stacking and transportation of 48 SKYDECK
panels 150 x 75.
250
82,400
1550
061530
10
Ø21
2310
307
Service
065074
Panels 150 x 75.
Safety Instructions
1720
Column Formwork
Slab Formwork
110,000
For moving pallets and crate pallets.
Shoring Systems
061510
1970
Item no. Weight kg
061500
76,700
Wall Formwork
Formwork Girders
1510
640
1630
760
Technical Data
Forklift arm length 1500 mm, forklift arm width
520 mm, stroke range 85 - 195 mm.
Safety Instructions
Load-carrying capacity 2.0 t.
061520
For moving SKYDECK slab tables.
Safety Instructions
2800
1429
Service
403,000
3240
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
.
3900
308
1224
Formwork Girders
Stripping Cart, Alu
Mobile working scaffold. Height-adjustable in
25 cm increments. Platform height max. 2.00 m.
Technical Data
Shoring Systems
Complete with
1 pc. 102033 Steel Traverse 140/220 ASW
1 pc. 102025 Folding Base Unit 160/190 ASW
6 pc. 102035 Vertical Frame 70/90 ASW
2 pc. 102026 Entry Platform 190 ASW
1 pc. 102030 Toe-Board Set 70/190 ASW
4 pc. 102027 Double Guardrail 190 ASW
3 pc. 102028 Diagonal Brace 210 ASW
2 pc. 102029 Horizontal Brace 190 ASW
8 pc. 102037 Wind Security Clip 60 ASW
12 pc. 102807 Ballast 10 kg ASW
Technical Data
Climbing Systems
Packed in:
Ring Pallet USP 104 Item no. 100678, with
Lashing Strap Item no. 100707 (x 1) and Scaffold
Tube Steel Item no. 026411 (x 4).
102033
Working Platforms
102034
102035
102027
102028
102029
2360
102037
1100
102807
102030
309
102026
Bridge- and
Tunnel Formwork
102025
Service
363,000
1150
102031
750
Slab Formwork
1800
Column Formwork
3035
Wall Formwork
Item no. Weight kg
035500
72,800
Service
310
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
314
315
314
317
315
312
312
312
313
315
316
316
317
313
313
315
312
314
316
316
314
314
313
Clamp GFK
Corner Platform GCP, complete
Extension GF 10
Filler Element Cross GFC 200 x 100
Filler Element Longitudinal GFL 150 x 100
Guardrail GF 100
Head Spindle GTR 38-70/50
Palett GF 85 x 210, galv.
Palett RP 80 x 110, galv.
Platform GIP 200, complete
Prophead GFH, galv.
Shuttering Aid GFA
Stacking Device GRIDFLEX, galv.
Standard Element GFP 200 x 100
Tension Sleeve GFO
Tension Strap Rail GF 125
Traverse GFT
Wall Holder GFW
311
Service
065073
028100
110556
111379
111392
110040
110486
110646
110326
111291
111738
111396
111566
109910
110044
110939
110038
110595
115385
115427
110045
065074
110238
Formwork Girders
Item no. Weight kg
110038
20,300
Aluminium, nailable, white powder-coated.
100
80
100
980
80
Column Formwork
5 x 167
Wall Formwork
1994
110040
22,100
Aluminium, nailable, red powder-coated.
Shoring Systems
1850
15,000
Climbing Systems
110486
Aluminium, nailable, yellow powder-coated.
110646
5,800
100
980
Working Platforms
Aluminium, nailable yellow powder-coated.
1830
167
100
80
312
207
Bridge- and
Tunnel Formwork
80
5 x 167
1507
Service
1041
5 x 167
Slab Formwork
1980
Formwork Girders
Item no. Weight kg
109910
0,845
Prophead GFH, galv.
With spring tetention. Supports GRIDFLEX elements.
Column Formwork
58
120
Wall Formwork
137
4,880
Wall Holder GFW
For horizontal anchoring ot the formwork on the
wall.
1500
Shoring Systems
Slab Formwork
110238
Technical Data
Adjustable in 7.5 cm increments.
7,150
Guardrail GF 100
As guardrail for cantilevers. Guardrail height above
top edge of plywood = 1.30 m.
970
110326
max 3925
Bridge- and
Tunnel Formwork
min 2225
Working Platforms
Shuttering Aid GFA
For forming of GRIDFLEX.
313
Service
2,370
1448
110044
Climbing Systems
110 80
100
Item no. Weight kg
110556
0,797
Clamp GFK, galv.
For attaching filler panels to the standard elements.
Column Formwork
97
44
Wall Formwork
Formwork Girders
180
5,120
Traverse GFT
With securing wedge for fixing to the main beam
of the element.
Slab Formwork
110045
Note
For assembly of length compensation, with props
as centre support and support for cantilever elements on the slab edge.
57
Shoring Systems
42
60
997
0,411
Climbing Systems
110595
Tension Sleeve GFO
For bracing cantilevered elements.
Technical Data
Permissible force 3.0 kN.
80
Working Platforms
71
63
065074
0,450
Technical Data
Service
065073
1,370
Anchor Chain 3.0 kN l = 2.5 m
max 300
Technical Data
15
Bridge- and
Tunnel Formwork
16
min 220
2500
314
Formwork Girders
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
85
Ø13
Wall Formwork
Item no. Weight kg
028100
1,830
90
150
4,600
For using GRIDFLEX in combination with PERI UP
shoring.
Column Formwork
111291
10
Ø21
80
120
Slab Formwork
708
Ø14
Complete with
2 pc. 111392 Extension GF 10
Safety Instructions
Load capacity 175 kg per ring, 350 kg per stack
Climbing Systems
For stacking 10 Standard Element GFP 200 x
100, Filler Element Cross GFC 200 x 100 or Filler
Element Longitudinal GFL 150 x 100 respectively.
Suitable for crane and fork-lift transport. 2 pieces
per stack.
959
468
111392
2,970
Extension GF 10
Working Platforms
Accessories
2,090
4,230
835
115427
115385
190
Bridge- and
Tunnel Formwork
1085
Ø48,3
315
Service
21,700
491
110939
Shoring Systems
38
As transport protection for GRIDFLEX Elements
GFP 200 x 100 and GFL 150 x 100.
Yellow powder-coated.
130
933
4,230
GFC 200 x 100. Red powder-coated.
43
115385
1258
111396
28,100
For stacking GF 100 guardrails.
Shoring Systems
Complete with
Safety Instructions
1010
750
493
693
878
953
1140
111738
Service
63,900
For stacking and transportation of GRIDFLEX Filler
Panel GFL 183 x 20 and Main Beam BD 210 or
Crossbeam BD 210.
880
Safety Instructions
1095
925
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
385
230
Slab Formwork
161
Column Formwork
33
Item no. Weight kg
115427
2,090
Wall Formwork
Formwork Girders
2190
316
1020
Formwork Girders
Complete with
1 pc. 111703 Platform Frame GIP 200
1 pc. 111700 Platform Handrail GIP 200
2 pc. 111702 Main Beam GIP 200
1 pc. 111701 Cross Beam GIP 200
Technical Data
Wall Formwork
Platform with 12 mm thick decking and insertable
guardrail. Delivered as individual components.
Column Formwork
Item no. Weight kg
111566 106,000
1610
Slab Formwork
2130
Working Platforms
Climbing Systems
Complete with
1 pc. 111378 Corner Platform GCP
2 pc. 111332 Handrail GCP 130, galv.
1 pc. 111340 Handrail GCP 160, galv.
1 pc. 111324 Internal Angle GCP
Technical Data
Permissible live load 150 kg/m2.
2360
1479
Bridge- and
Tunnel Formwork
317
Service
2600
Platform with 21 mm thick decking and insertable
guardrail. Delivered as individual components.
881
265,000
1300
111379
Shoring Systems
2035
Service
318
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
324
322
324
323
322
322
322
323
322
322
325
325
325
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
321
321
321
321
321
321
321
321
321
321
321
325
321
324
324
326
326
323
323
Assembly Bar 24, galv.
Brace Clamp HL, galv.
Brace Clamp, galv.
Clawhead 16/20 S, galv.
Clawhead 16/20, galv.
Clawhead 24 S, galv.
Crosshead 20/24 S, galv.
Crosshead 20/24, galv.
Erection Bar GT/VT, galv.
Framing Clip, galv.
Girder VT 20K l = 3,90 m
Guardrail Holder
Lowering Head 20/24, galv.
Pallet RP-2 80 x 120, galv.
Stripping Cart, Alu
Tension Strap 16-25, galv.
Universal Tripod, galv.
319
Service
027930
027990
027790
027940
028660
028670
028890
018060
028680
027890
018280
070740
018290
075100
075120
075150
075180
075210
075240
075270
075300
075330
075360
075390
075420
075450
075480
075510
075540
075570
075600
074990
074905
074910
074890
074920
074950
074930
074940
074960
074970
074980
035700
028870
103434
103429
102031
035500
028590
028000
Formwork Girders
Wall Formwork
Item no. Weight kg
075100
075120
075150
075180
075210
075240
075270
075300
075330
075360
075390
075420
075450
075480
075510
075540
075570
075600
Slab Formwork
Column Formwork
5,300
7,100
8,900
10,600
12,400
14,200
15,900
17,700
19,500
21,200
23,000
24,800
26,600
28,300
30,100
31,900
33,600
35,400
Girders GT 24
Universal formwork girder made of wood.
L
918
1214
1510
1806
2102
2398
2694
2990
3286
3582
3878
4174
4470
4766
5062
5358
5654
5950
Note
The common lengths of the GT 24 are colourcoded to allow easy handling.
Technical Data
perm. Q = 14.0 kN
perm. Q = 13.0 kN
perm. M = 7.0 kNm
ly = 8000 cm4
Q = perm. shear force Compression Strut
Q = perm. shear force Tension Strut
D
Shoring Systems
Z
D
Z
Climbing Systems
L
Working Platforms
311
296
60
Service
28
80
320
240
120
Bridge- and
Tunnel Formwork
60
163
296
Formwork Girders
Item no. Weight kg
Girders VT 20K with Steel Cap
Formwork girder made of wood. Webs are rounded for reducing damage.
L
1450
2150
2450
2650
2900
3300
3600
3900
4500
4900
5900
Note
Technical Data
perm. Q = 11.0 kN
perm. M = 5.0 kNm
ly = 4290 cm4
Wall Formwork
8,560
12,700
14,460
15,640
17,110
19,470
21,240
23,010
26,550
28,910
34,810
Column Formwork
074990
074905
074910
074890
074920
074930
074940
074950
074960
074970
074980
140
140
Climbing Systems
200
40
120
40
100
Ø22
Shoring Systems
100
100
Slab Formwork
L
27
170
85
Ø6,5
210
321
155
Service
240
Bridge- and
Tunnel Formwork
Note
Required hole diameter of the prop end plate
Ø 40 mm.
Lowering range 4 cm.
125
For tilt-resistant support of one or two GT 24 or
VT 20 girders. Girder overlap on both sides
minimum 16.3 cm for GT 24 and 15 cm for
VT 20.
42 10 195
5,430
136
028870
Working Platforms
80
Item no. Weight kg
028680
027890
3,190
3,080
Crossheads 20/24, galv.
With or without self-locking coupling. For postioning intermediate props on the VT 20 girder
without nailing.
Note
Ø 40 mm.
240
155
170
85
Ø6,5
Clawheads 24, galv.
Clawhead 24 L, galv.
With or without self-locking coupling. For postioning intermediate props on the GT 24 girder
without nailing.
Note
Ø 40 mm.
280
161 3 64
80
Shoring Systems
Climbing Systems
125
158
1,650
1,540
Slab Formwork
028890
028880
Ø10
028660
028670
1,040
0,936
With or without self-locking coupling. For postioning intermediate props on the VT 20 girder
without nailing.
Note
Ø 40 mm.
140
44
80
161 3
Working Platforms
Bridge- and
Tunnel Formwork
210
6
Column Formwork
195
Wall Formwork
Formwork Girders
Ø10
027990
0,150
129
107
Ø26
Ø5,5
Ø14
Service
018060
322
0,030
Accessories
Formwork Girders
Item no. Weight kg
018060
0,030
Wall Formwork
Ø4
0,568
For mounting 2 GT 24 or VT 20 girders on the
Crosshead Spindle and Adjustable Crosshead
Spindle TR 38.
Note
Spanner Size SW 19.
Column Formwork
028590
1,840
Brace Clamp, galv.
For assembly of 3 x 15 cm stiffening boards on
slab props Ø 48 - 76 mm.
Climbing Systems
027940
Safety Instructions
Only use as assembly aid!
Bridge- and
Tunnel Formwork
Working Platforms
555
186
210
40
400
323
Service
Erection aid for slab props with Ø 48 - 120 mm
and 120 x 120 mm.
Can also be used in combination with MULTIPROP
MP Slab Props and Base MP 50.
800
9,170
Shoring Systems
110
SW 19
028000
Slab Formwork
270
210
Item no. Weight kg
027790
2,460
slab props Ø 76 - 89 mm and 100 x 100 mm to
120 x 120 mm.
Wall Formwork
Column Formwork
239
210
450
1280 / 1580
880
1080 / 1380
680
100
6,120
800
For shuttering of MULTIFLEX with GT 24 girders.
95
027930
Ø34
49
Bridge- and
Tunnel Formwork
20
1572
Service
Safety Instructions
1200 / 1500
Working Platforms
Climbing Systems
Shoring Systems
Pallets RP-2, galv.
For stacking and transporting formwork and
scaffolding components.
324
600
33,400
40,200
Slab Formwork
103434
103429
40
850
Formwork Girders
Formwork Girders
For shuttering of MULTIFLEX with GT 24 or
VT 20 girders.
85
Wall Formwork
150
Item no. Weight kg
070740
2,980
190
Column Formwork
1711
Guardrail Holder
For mounting a fall protection.
Adjustable from 20 - 420 mm.
Slab Formwork
9,790
120
035700
30
min 20
max 420
Shoring Systems
995
460
65
Working Platforms
Framing Clip, galv.
For connecting crossed timbers or girders.
98
1,000
Accessories
018280
1,000
018280
Ø4,8
Bridge- and
Tunnel Formwork
36
Note
75
65
Ø3,1
325
Service
0,098
185
018290
Climbing Systems
35
311
Item no. Weight kg
035500
72,800
Stripping Cart, Alu
Technical Data
Column Formwork
3035
Wall Formwork
Formwork Girders
102031
363,000
Packed in:
Ring Pallet USP 104 Item no. 100678, with
Lashing Strap Item no. 100707 (x 1) and Scaffold
Tube Steel Item no. 026411 (x 4).
Climbing Systems
Shoring Systems
Slab Formwork
1800
750
Complete with
1 pc. 102033 Steel Traverse 140/220 ASW
1 pc. 102025 Folding Base Unit 160/190 ASW
6 pc. 102035 Vertical Frame 70/90 ASW
2 pc. 102026 Entry Platform 190 ASW
1 pc. 102030 Toe-Board Set 70/190 ASW
4 pc. 102027 Double Guardrail 190 ASW
3 pc. 102028 Diagonal Brace 210 ASW
2 pc. 102029 Horizontal Brace 190 ASW
8 pc. 102037 Wind Security Clip 60 ASW
12 pc. 102807 Ballast 10 kg ASW
Technical Data
102033
Working Platforms
102034
102035
Bridge- and
Tunnel Formwork
102025
Service
1150
102026
102027
102028
102029
2360
102037
1100
102030
326
102807
Service
327
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
328
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
338
337
333
337
337
333
338
333
334
335
334
334
332
336
336
331
332
335
332
332
330
330
331
331
331
337
Attachment 100 for Striking Trolley
Back Stop Lifting Fork 1 t / 5,0 m
Bottom Frame SRU/UZ
Central cross 170
Central cross 200
Connector SRU/UZ
Extension 60 for Striking Trolley
External Bracket SRU/UZ
Guardrail Holder GT24/VT20
Guardrail Holder SRU/SRZ
Guardrail Holder
Guardrail Post SGP
Internal Bracket SRU/UZ
Lifting Fork 1 t / 5,0 m
Lifting Fork 1,75 t / 8,0 m
Stiffening Board, 420 x 400 mm
Swivel Head SRU
Table Lift Truck PTL 1250
Table Module SRU 200/215 x 500
Table Module VT 200/215 x 400
Table Swivel Head, Lower Part
Table Swivel Head, Middle Part
Table Swivel Head, Upper Part-2
Table Trolley 2 t, l = 2.00 m
329
Service
028720
102210
112919
101854
102251
112920
104050
112918
101290
104131
035700
061260
112921
101862
103212
100778
112498
108108
112782
112783
072700
072710
100956
100954
110422
028710
Item no. Weight kg
072700
072720
397,000
450,000
Wall Formwork
Formwork Girders
Table Modules VT
Pre-assembled table module formwork element
with 21 mm thick plywood formlining. With table
swivel head, upper and middle parts.
Note
2150 / 2650
2000 / 2500
75
325 /
575
1500
325 /
575
Column Formwork
429
75
2500
750
Climbing Systems
Shoring Systems
2150 / 2650
Slab Formwork
750
4000
100956
11,900
072710
072730
502,000
567,000
Accessories
Table Modules VT
Pre-assembled table module formwork element
with 21 mm thick plywood formlining. With table
swivel head, upper and middle parts.
Note
75
325 /
575
1500
325 /
575
Bridge- and
Tunnel Formwork
2350
1150
750
2150 / 2650
750
5000
100956
Service
2000 / 2500
429
Working Platforms
2150 / 2650
75
330
11,900
Accessories
Formwork Girders
256
Ø7
Wall Formwork
For assembling PERI Table Module VT.
400
Ø15
6 x 50 = 300
60
Complete with
2 pc. 100960 Distorsion Fuse
2 pc. 710338 Mininut
Slab Formwork
9,130
Shoring Systems
260
244
256
397
100954
Column Formwork
472
370
11,900
For assembling PERI Table Module VT. With quickrelease clamp for slab props from Ø 57 mm as
well as PERI MULTIPROP props.
Technical Data
Bearing capacity 56.0 kN.
Climbing Systems
100956
270
Working Platforms
278
1,720
400
100778
180
Bridge- and
Tunnel Formwork
370
420
21
331
Service
Item no. Weight kg
110422
5,640
Item no. Weight kg
112782
112783
632,000
697,000
Table Modules SRU
Pre-assembled, rentable slab table. Plywood
21 mm.
Wall Formwork
Formwork Girders
Complete with
4 pc. 112498 Swivel Head SRU
2150 / 2650
2000 / 2500
75
325 /
575
1500
325 /
575
Column Formwork
430
75
3000
1000
Shoring Systems
2150 / 2650
Slab Formwork
1000
5000
13,300
Complete with
2 pc. 104031 Bolt Ø 21 x 120
202
Internal frame for Beam Formwork SRU/UZ.
Height adjustable in 50 mm increments.
Complete with
2 pc. 113012 Bolt Ø 20 x 260, galv.
2 pc. 711063 Sleeve ISO 8752 5 x 35, galv.
300
720
730
Ø21
Ø9
Ø9
166
296
332
200
15,100
295
120 80
112921
Service
Swivel Head SRU
With wedge connection for fixing slab props up to
max. Ø 89 mm.
510
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
112498
Formwork Girders
External frame for SRU/ZU Beam Formwork.
Complete with handrail post. Height-adjustable in
100 mm increments.
Complete with
2 pc. 113012 Bolt Ø 20 x 260, galv.
2 pc. 711063 Sleeve ISO 8752-5 x 35, galv.
1250
1140
Wall Formwork
Item no. Weight kg
112918
29,500
Column Formwork
152
550
2070
52
Bottom Frame SRU/UZ
Bottom frame for Beam Formwork SRU/UZ.
Adjustable in 50 cm increments. With integrated
support bearings.
Note
Ø 40 mm.
Ø21
172
472
Climbing Systems
32,000
200
112919
Shoring Systems
30
Slab Formwork
1000
6 x 100 = 600
Ø21
25
9 x 50 = 450
100
25
500
1150
100 210
50
320
333
Service
Ø21
660
100
Bridge- and
Tunnel Formwork
Complete with
3 pc. 113012 Bolt Ø 20 x 260, galv.
560
Connector SRU/UZ
For connecting and bracing the Bodenriegel SRU/
UZ to the Steel Waler SRU. Adjustable in 50 cm
increments.
7x50 = 350
8,080
50
112920
Working Platforms
152
52
Ø9
Guardrail Holder
120
Item no. Weight kg
035700
9,790
Wall Formwork
30
35
311
061260
6,150
Guardrail Post SGP
35
101290
5,670
For assembling a guardrail on GT 24 and VT 20
girders.
395
117
Bridge- and
Tunnel Formwork
1768
Complete with
1 pc. 105400 Bolt Ø 20 x 140, galv.
81
Service
1438
65
32
061260
334
6,150
Accessories
Guardrail Post SGP
Ø21
352
Working Platforms
Climbing Systems
433
433
Shoring Systems
120
Slab Formwork
Column Formwork
995
460
65
min 20
max 420
Formwork Girders
Formwork Girders
495
45
Column Formwork
Slab Formwork
Technical Data
Utilisation height 1.60 m up to 5.00 m. Required
voltage for charging process 230 V, 50/60 Hz.
Safety Instructions
Floor conveyor vehicle, load-carrying capacity
1.25 t.
Climbing Systems
Shoring Systems
1700
1921
Working Platforms
For moving PERI slab tables. Not approved for
transporting site personnel! Only move on clean
and flat surfaces with a sufficient load-bearing
capacity.
1000
Bridge- and
Tunnel Formwork
1460,000
108108
Accessories
Guardrail Post SGP
max 5000
6,150
140
min 1570
061260
Wall Formwork
Complete with
2 pc. 105400 Bolt Ø 20 x 140, galv.
1140
335
Service
For assembling a guardrail to the Steel Walers
SRU and SRZ, Profile U 100 to U 140.
308
Item no. Weight kg
104131
3,940
Item no. Weight kg
103212 1610,000
For moving PERI slab tables. Table length up to
8.0 m
Safety Instructions
3031
Column Formwork
11378
Wall Formwork
Formwork Girders
Slab Formwork
5798
2910
1250
1250
4x
150
575,000
For moving PERI slab tables. Table length up to
5.0 m
Safety Instructions
Bridge- and
Tunnel Formwork
2528
7759
Working Platforms
Climbing Systems
101862
3991
750
750
Service
3x
150
336
2013
1800
900
3x
150
4353
2269
Shoring Systems
800
2000
4x
150
6298
Formwork Girders
As stop for Transportation Fork 1t / 5.0 m. Always
use in pairs.
Wall Formwork
Item no. Weight kg
102210
8,190
Column Formwork
123
900
742
50
123
Table Trolleys 2 t
For moving PERI slab tables. Not approved for
transporting site personnel! Only move on clean
and flat surfaces with a sufficient load-bearing
capacity.
Technical Data
Utilisation height 1.45 m up to 3.20 m
With Extension 100 up to 4.20 m
With Extension 100 und Extension 60 up to
4.80 m.
Safety Instructions
Lifting equipment according to BGV D8.
Load-carrying capacity per winch 1.0 t.
Slab Formwork
433,000
428,000
Shoring Systems
028710
028715
150
1700 / 2000
1310 / 1610
1500
Climbing Systems
min 1450
max 3160
min 1460 max 2060
2330 / 2630
Bridge- and
Tunnel Formwork
26,200
21,200
Central crosses
Central cross 200
Central cross 170
For Table Striking and Transportation Trolly 2 t,
l = 2.00 m or 1.70 m.
102251
101854
Accessories
Central cross 200
Central cross 170
1370 / 1670
60
337
Service
26,200
21,200
830
102251
101854
Working Platforms
1640
Item no. Weight kg
028720
34,600
Wall Formwork
Formwork Girders
2 pieces per Table Striking and Transportation
Trolley. Use telescopic arm of the trolley.
With the Extension 100, the working height of
the trolley increases: min. height 2.45 m, max.
height 4.20 m
1270
Ø17
995
Column Formwork
100
200
150
M 16x45
104050
Shoring Systems
Slab Formwork
105
15,100
2 pieces per Table Striking and Transportation
Trolley. With the Extension 60 and Extension 100,
the working height of the trolley increases: min.
height 3.05 m, max. height 4.80 m
200
600
100
M 16x45
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
150
338
Service
339
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
340
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
344
343
343
343
344
342
342
342
343
AW Bracket
AW Clamp 8-10
AW Handrail Post
AW Slab Stopend Angle
Beam Waler UZR 190/150
UZ Beam Bracket 40
UZ Beam Width Adjustment Bar 129
UZ Beam Yoke Waler 100
341
Service
065075
065072
065071
065070
028790
065056
065065
065057
065058
Item no. Weight kg
065056
10,900
UZ Beam Bracket 40
For forming beams up to 80 cm high. With captive
Hook Tie and Wingnut Counterplate.
Note
Wall Formwork
440
Ø17
5
50
Column Formwork
Ø7
500
66
7,060
For use with UZ Beam Bracket 40. For beam width
max. 40 cm.
85
065057
967
215
Ø7 Ø14
065065
10,000
For use with UZ Beam Bracket 40. For beam width
max. 90 cm.
85
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
84
Ø7
155
Formwork Girders
1457
Ø7
Service
Bridge- and
Tunnel Formwork
215
Ø14
342
Formwork Girders
For carrying one or two GT 24 girders per side
along with additional support.
60
Item no. Weight kg
065058
8,650
Column Formwork
120
1000
Wall Formwork
Ø3,5
50
86
Ø6,5
AW Handrail Post
For assembling the guardrail on the Slab Stopend
Angle AW. Secure rear end with nails.
Climbing Systems
7,410
AW Clamp 8-10
For clamping the AW Slab Stopend Angle to girders or timbers with 8-10 cm thickness. With captive Triple Wingnut.
275
90
3,270
132
065072
67
Bridge- and
Tunnel Formwork
772
Working Platforms
1439
500
065071
68
Shoring Systems
400
Slab Formwork
Note
279
343
For forming slabs and beams up to 40 cm thick.
Service
1,670
240
065070
AW Bracket
As filler for the AW Slab Stopend Angle. For height
adjustment of side girder.
min 40 max 220
240
Item no. Weight kg
065075
1,750
Wall Formwork
Formwork Girders
67
Column Formwork
140
For simultaneous assembly of beam and slab
formwork. MULTIPROP props or PD 8 frames are
used as support.
Note
300
44,700
420
Slab Formwork
028790
152
12 x 100 = 1200
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
1500
Service
Ø17
Ø14
120
Ø9
110
Shoring Systems
1900
344
64
Ø51,3
Service
345
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
346
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
MULTIPROP
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
354
354
354
354
354
354
350
353
354
356
353
353
352
355
353
354
348
348
348
349
349
349
349
349
349
349
348
348
348
356
356
350
352
355
348
348
348
348
348
349
349
349
349
352
355
351
351
355
351
351
351
350
Alu Beam MPB 24 l = 3.00 m
Base MP 50
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Brace Connector MPB 24
Compression Brace Head MP/SRU
Connector MP-SRU
Connector MPV-2
Coupling MPB 24
Frame MRK 120
Frame MRK 137,5
Frame MRK 150
Frame MRK 180
Frame MRK 201,5
Frame MRK 225
Frame MRK 230
Frame MRK 237
Frame MRK 266
Frame MRK 296
Frame MRK 62,5
Frame MRK 75
Frame MRK 90
Guardrail Post SGP
Ladder 220 x 350, telescopic
MULTIPROP Bolt with Nut
MULTIPROP MP 120
MULTIPROP MP 250
MULTIPROP MP 350
MULTIPROP MP 480
MULTIPROP MP 625
MULTIPROP Platform 150 x 60
MULTIPROP Platform 150 x 60 with Hatch
MULTIPROP Strap SRZ U100 - U140
Quick Strap MPB 24/GT 24
Scaffold Tube Coupler MG-A/C
Scaffold Tube Coupler MG-B/D
Strap MPB 24
Tilting Base MKF
Tilting Forkhead MKK
Wing Nut Spanner HD
347
Service
079300
079360
079420
079480
079540
079600
027310
104031
104031
108213
107161
107160
027301
018060
018060
107348
028340
028380
028350
113799
028460
028360
028470
028480
028490
028370
028390
028400
028330
104131
061260
107173
111142
111142
027288
027289
027290
027291
027305
107169
107171
107170
107172
027302
108339
027298
027299
107820
027296
027297
028000
022027
027288
027289
027290
027291
027305
10,300
15,600
19,700
25,000
34,800
MULTIPROP MP
MULTIPROP MP 120
MULTIPROP MP 250
MULTIPROP MP 350
MULTIPROP MP 480
MULTIPROP MP 625
Slab prop made of aluminium. Used as individual
prop as well as in combination with MULTIPROP
Frames MRK to form towers.
80
Ø14
120
10
min. L
max. L
800
1200
1450
2500
1950
3500
2600
4800
4300
6250
Note
Approved by the German Building Authorities No.
Z-8.312-824. Permissible load: see PERI Design
Tables.
64
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
MULTIPROP
Ø40
87
10
028390
028400
028330
028340
028380
028350
9,890
10,100
11,300
14,000
15,400
16,300
MULTIPROP Frame MRK, Steel
Frame MRK 62,5
Frame MRK 75
Frame MRK 90
Frame MRK 120
Frame MRK 137,5
Frame MRK 150
Bracing frame for MULTIPROP. For connecting to
outer and inner tube. With captive wedge coupling.
L
545
670
820
1120
1295
1420
X
625
750
900
1200
1375
1500
Service
500
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
min L
10
0
max L
Slab Formwork
150
L
X
348
Formwork Girders
MULTIPROP
Item no. Weight kg
L
1720
1935
2170
2220
2290
2580
2880
X
1800
2015
2250
2300
2370
2660
2960
Wall Formwork
MULTIPROP Frames MRK, Aluminum
Frame MRK 180
Frame MRK 201,5
Frame MRK 225
Frame MRK 230
Frame MRK 237
Frame MRK 266
Frame MRK 296
Bracing frame for MULTIPROP. For connecting to
outer and inner tube. With captive wedge coupling.
Column Formwork
10,900
11,600
12,400
12,500
12,700
13,900
14,800
500
113799
028460
028360
028470
028480
028490
028370
12,000
18,000
MULTIPROP Platforms
For assembly of a working scaffold.
Technical Data
Permissible load up to 200 kg/m2.
Climbing Systems
91
107169
107170
Shoring Systems
Slab Formwork
L
X
Bridge- and
Tunnel Formwork
Technical Data
Permissible load up to 200 kg/m2.
1500 / 2250
349
Service
MULTIPROP Platforms with Hatch
For assembly of working scaffold. Self-locking
hatch opening for access ladder.
91
12,500
18,500
595
107171
107172
Working Platforms
595
1500 / 2250
Item no. Weight kg
107173
9,000
As access for MULTIPROP towers. Mounted to
decking with hatch.
Technical Data
Extension length 2.20 - 3.50 m.
Column Formwork
min 2200
max 3500
Wall Formwork
Formwork Girders
MULTIPROP
022027
4,230
330
Wing Nut Spanner HD
For easy release of the Head Spindle HDK 45 and
MULTIPROP slab props.
985
Ø48
027310
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
65
8,900
Base MP 50
For use with slab props with an end plate thickness of 6-10 mm. With clamped quick-release
fastener.
Service
350
Ø12,5
80
Ø 89
Ø42
200
Bridge- and
Tunnel Formwork
500
150
Formwork Girders
MULTIPROP
240
155
170
85
Wall Formwork
For tilt-resistant support of one or two GT 24 or VT
20 girders. Can be pivoted up to 3° on all sides.
With clamped quick-release fastener.
Ø6,5
195
Item no. Weight kg
027297
8,730
150
80
6,220
Tilting Base MKF
For use on inclined assembly areas. Tiltable on all
sides up to 3°. With clamped quick-release fastener.
Slab Formwork
027296
Column Formwork
min 120
max 220
Ø12,5
Ø 38
Shoring Systems
80
150
min 120
max 220
Ø12,5
140
1,930
1,930
Scaffold Tube Coupler
For connecting scaffold tubes Ø 48 mm to the
MULTIPROP MP slab props.
Climbing Systems
027298
027299
Bridge- and
Tunnel Formwork
Safety Instructions
Only use as assembly aid!
Erection aid for slab props with Ø 48 - 120 mm
and 120 x 120 mm.
Can also be used in combination with MULTIPROP
MP slab props and Base MP 50.
800
9,170
555
028000
132
Working Platforms
191
70
132
351
Service
70
95
95
191
SW 19
Formwork Girders
MULTIPROP
Item no. Weight kg
027301
1,020
Connector MPV-2
For connecting 2 MULTIPROP slab props.
60
25
80
Wall Formwork
100
Column Formwork
Ø12
0,082
Slab Formwork
111142
For connecting 2 MULTIPROP slab props and
assembly of accessories on the Alu Beam
MPB 24.
Note
Wrench size SW 19.
40
SW 19
Shoring Systems
M 12
Climbing Systems
027302
2,100
For fixing Steel Walers SRZ and SRU, Profile U100
to U140 on MULTIPROP slab props.
Note
Wrench size SW 24.
250
50
Service
Bridge- and
Tunnel Formwork
232
Working Platforms
SW 24
352
Formwork Girders
MULTIPROP
Item no. Weight kg
107161
3,050
As connecting element between MULTIPROP slab
props and Steel Waler SRU/SRZ.
50
120
107160
3,960
Accessories
Bolt Ø 21 x 120
Slab Formwork
0,462
0,030
120
Connector MP-SRU
As compensation element between the Prop Head
MP/SRU and inclined positioned Steel Waler SRU.
48
131
325
Shoring Systems
104031
018060
Column Formwork
242
Wall Formwork
60
Ø21
52
104031
0,462
Accessories
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Working Platforms
0,462
0,030
207
122
Ø6
0,030
018060
0,030
Accessories
018060
Bridge- and
Tunnel Formwork
Ø21
Ø4
353
Service
104031
018060
Climbing Systems
100
Formwork Girders
Item no. Weight kg
079300
079360
079420
079480
079540
079600
24,000
28,800
33,700
38,500
43,300
48,100
Alu Beam MPB 24
Alu Beam MPB 24 l =
Alu Beam MPB 24 l =
Alu Beam MPB 24 l =
Alu Beam MPB 24 l =
Alu Beam MPB 24 l =
Alu Beam MPB 24 l =
Aluminium main beam
system.
3.00 m
3.60 m
4.20 m
4.80 m
5.40 m
6.00 m
for the MULTIPROP
Column Formwork
Wall Formwork
MULTIPROP
L
2998
3598
4198
4798
5398
5998
Note
Permissible load: see PERI design tables
Technical Data
perm. Q = 50 kN
perm. A = 80 kN
perm. M = 15 kNm
L
Shoring Systems
240
Slab Formwork
80
107348
9,530
Coupling MPB 24
For connecting the Alu Beam MPB 24.
950
48
Working Platforms
Climbing Systems
129
Ø21
104031
018060
0,462
0,030
104031
0,462
Accessories
Bolt Ø 21 x 120
Bolt Ø 21 x 120
207
Service
Bridge- and
Tunnel Formwork
122
Ø6
Ø21
018060
354
0,030
Accessories
Formwork Girders
MULTIPROP
Item no. Weight kg
018060
0,030
Wall Formwork
Ø4
0,203
For assembly of GT 24 girders on the Alu Beam
MPB 24.
Column Formwork
108339
80
68
Ø7
Slab Formwork
70
1,000
107820
0,057
Accessories
Strap MPB 24
For fixing Alu Beam MPB 24 to the MULTIPROP
prop or mounting the GT 24 girder on the Alu
Beam MPB 24.
65
Climbing Systems
018280
Shoring Systems
67
Ø5
12
Working Platforms
46
Ø8,5
Ø13
0,082
For connecting 2 MULTIPROP slab props and
assembly of accessories on the Alu Beam
MPB 24.
Bridge- and
Tunnel Formwork
111142
Accessories
Note
Wrench size SW 19.
40
0,082
SW 19
M 12
355
Service
111142
Item no. Weight kg
108213
2,590
For connecting push-pull props or bracing to
Aluminium Beam MPB 24.
Ø22
Wall Formwork
Formwork Girders
MULTIPROP
267
82
14
Ø16,5
104031
018060
0,462
0,030
104131
3,940
For assembling a guardrail to the Steel Walers
SRU and SRZ, Profile U 100 to U 140.
Complete with
2 pc. 105400 Bolt Ø 20 x 140, galv.
45
308
061260
6,150
061260
6,150
140
Accessories
Guardrail Post SGP
Guardrail Post SGP
35
356
65
1438
1768
Bridge- and
Tunnel Formwork
433
433
120
Working Platforms
Climbing Systems
495
Service
120
Accessories
Bolt Ø 21 x 120
Shoring Systems
Slab Formwork
Column Formwork
205
Service
357
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
358
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
362
362
361
361
361
361
361
361
361
361
361
361
361
361
361
361
362
362
362
362
360
360
360
360
360
360
360
360
360
363
361
Brace Clamp, galv.
Crosshead PEP 10 / VT 20, galv.
PEP Frames PRK 100
PEP Frames PRK 120
PEP Frames PRK 137,5
PEP Frames PRK 150
PEP Frames PRK 180
PEP Frames PRK 200
PEP Frames PRK 210
PEP Frames PRK 225
PEP Frames PRK 230
PEP Frames PRK 266
PEP Frames PRK 296
PEP Frames PRK 62,5
PEP Frames PRK 75
Prop PEP 10-250 A
Prop PEP 10-300 A
Prop PEP 10-350 A
Prop PEP 10-400 A
Prop PEP 20-300
Prop PEP 20-350
Prop PEP 20-400
Prop PEP 20-500
Prop PEP 30-150
Prop PEP 30-250
Prop PEP 30-300
Prop PEP 30-350
Prop PEP 30-400
Tripod PEP 10
359
Service
027940
106989
112813
112814
111813
111814
115980
112718
111815
112788
111816
111817
111818
111819
111811
111812
106434
106433
106432
106429
103058
103059
103060
103061
103066
103067
103062
103063
103065
107152
028000
Formwork Girders
Item no. Weight kg
103066
103067
103062
103063
103065
10,800
15,400
19,000
23,100
27,500
Props PEP 30
Prop PEP 30-150
Prop PEP 30-250
Prop PEP 30-300
Prop PEP 30-350
Prop PEP 30-400
Slab prop made of steel
D
min. L
max. L
66,0
960
1500
66,0
1460
2500
71,5
1710
3000
75,5
1960
3500
84,0
2210
4000
Note
8
Wall Formwork
Ø9
Ø14
Column Formwork
Ø40
80
100
min L
Slab Formwork
max L
120
8
103058
103059
103060
103061
16,100
19,600
22,900
30,600
Props PEP 20
Prop PEP 20-300
Prop PEP 20-350
Prop PEP 20-400
Prop PEP 20-500
Slab prop made of steel.
D
min. L
max. L
66,0
1710
3000
71,5
1960
3500
75,5
2210
4000
84,0
2710
5000
Note
6
Working Platforms
Climbing Systems
Shoring Systems
D
Ø9
Ø14
Ø40
80
100
min L
max L
Bridge- and
Tunnel Formwork
120
Service
6
D
360
Formwork Girders
Item no. Weight kg
X
625
750
1000
1200
1375
1500
Wall Formwork
L
723
848
1098
1298
1473
1598
Column Formwork
PEP Frames PRK, Steel
PEP Frames PRK 62,5
PEP Frames PRK 75
PEP Frames PRK 100
PEP Frames PRK 120
PEP Frames PRK 150
Stifffening frame for PEP slab props. Complete
with captive wedge coupling.
Climbing Systems
Shoring Systems
X
1800
2000
2015
2100
2250
2300
2660
2960
X
L
Working Platforms
L
1098
2098
2113
2198
2348
2398
2758
3058
Bridge- and
Tunnel Formwork
PEP Frames PRK
PEP Frames PRK 180
PEP Frames PRK 200
PEP Frames PRK 210
PEP Frames PRK 225
PEP Frames PRK 230
PEP Frames PRK 266
PEP Frames PRK 296
Stifffening frame for PEP slab props. Complete
with captive wedge coupling.
14,700
15,300
15,400
15,600
16,200
16,300
17,700
18,600
500
115980
112718
111815
112788
111816
111817
111818
111819
Slab Formwork
X
L
361
Service
13,700
13,900
15,900
17,800
19,200
20,100
500
111811
111812
112813
112814
111813
111814
Item no. Weight kg
027940
1,840
Brace Clamp, galv.
slab props Ø 48 - 76 mm.
186
Wall Formwork
Formwork Girders
210
40
106434
106433
106432
106429
10,100
11,500
13,400
14,900
Props PEP 10
Prop PEP 10-250 A
Prop PEP 10-300 A
Prop PEP 10-350 A
Prop PEP 10-400 A
Lightweight slab prop made of steel.
min. L
max. L
1470
2500
1720
3000
1970
3500
2220
4000
Note
7
Slab Formwork
Column Formwork
400
Ø5
Shoring Systems
Ø14
Ø30
80
7
Ø40
106989
Service
1,430
For stable support for single or twin VT 20 Girders.
With self-locking coupling.
253
161
180
Bridge- and
Tunnel Formwork
Working Platforms
min L
Climbing Systems
max L
120
362
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Tripod PEP 10
Erection aid for PEP 10 Slab Props with
with Ø 44 - 64 mm.
363
Service
Item no. Weight kg
107152
5,810
639
Service
364
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
366
369
367
368
370
366
369
369
367
367
368
369
370
370
370
370
370
370
370
370
368
366
370
371
368
Base-Head Frame ST 100, galv.
Connector ST 100, galv.
Cross Forkhead TR 38-70/50
Cross Strap, galv.
Diagonal Strut ST 100, galv.
End Frame ST 100, galv.
End Waler ST 100, galv.
Head Spindle TR 38 -70/50, galv.
Head Spindle TR 38-70/50
Heavy Duty Adj. Base Plate TR 38-70/50
Industrial Deck UDI 25 x 100
Pallet ST 100/2, galv.
Spindle Safety Strap ST 100, galv.
Stacking Frame ST 100, galv.
Standard Coupler NK 48/48, galv.
365
Service
019900
019810
019950
018300
026417
019940
019930
019920
019790
116081
019780
106092
065050
026411
026412
026413
026414
026419
026418
026415
019800
019910
017020
017010
028590
Item no. Weight kg
019900
16,600
Base and head frame for the ST 100 Stacking
Tower.
Wall Formwork
450
Ø48,3
125
125
Slab Formwork
1000
Column Formwork
80
Ø22
330
Formwork Girders
019910
6,820
Frame for Stacking Tower ST 100. 4 pieces per
ascending metre.
738
500
Ø22
250
Working Platforms
Bridge- and
Tunnel Formwork
250
Ø48,3
Climbing Systems
Shoring Systems
1000
125
125
1000
019940
2,290
Diagonals for Stacking Tower ST 100. Number
required depends on the static system.
Service
1300
1250
Ø34
366
Formwork Girders
Note
With captive Quick Jack Nut.
Wall Formwork
240
170
Maximum inclination of the head plate on all
sides 4.4%.
Note
As of 01.07.2009, only available as rentable item.
37,5
85
37,5
50
170
Shoring Systems
6,360
Ø13
110
80
717
Ø19
Ø14
Ø10
160
min 51
max 535
190
Ø21
38
6,950
Maximum inclination of the head plate on all sides
4.4%.
Note
With locking device and captive Quick Jack Nut.
37,5
80
170
85
37,5
Ø10
240
max 535
80
76
Ø19
687
Ø14
160
min 60
Bridge- and
Tunnel Formwork
116081
Ø 38
028590
018300
0,568
0,564
Climbing Systems
019790
Accessories
Working Platforms
0,568
Ø10
Accessories
Cross Strap, galv.
367
Service
028590
Column Formwork
38
Slab Formwork
85
710
min 47
max 535
195
Ø6,5
Tilt-resistant head spindle for holding one or two
GT 24 or VT 20 girders.
155
Item no. Weight kg
019950
7,690
Formwork Girders
Item no. Weight kg
019780
5,160
For heavily loaded shoring.
Note
38
Wall Formwork
140
80
710
max 535
110
Ø19
min 47
Ø21
Ø10
Column Formwork
Ø14
0,568
Slab Formwork
028590
Spindle TR 38.
Note
Wrench size SW 19.
110
Shoring Systems
270
210
SW 19
Cross Strap, galv.
For fixing Steel Walers SRZ and SRU on the
Adjustable Crosshead Spindle TR 38.
50
0,564
Climbing Systems
018300
Ø20
10
Bridge- and
Tunnel Formwork
Working Platforms
150
018350
0,310
019800
0,063
Accessories
Bolt ISO 4016 M16 x 160-4.6 MU, galv.
To prevent spindles from falling out during moving
with the crane.
Service
154
Ø 71
368
Formwork Girders
Wall Formwork
62
For bracing the End Frame ST 100. 2 pieces at the
top and bottom.
208
Item no. Weight kg
019920
6,180
Column Formwork
90
1000
As replacement for the Base Frame ST 100. In
combination with End Waler ST 100.
2 per waler line.
Slab Formwork
5,260
450
Ø22
250
Ø48,3
125
Shoring Systems
330
80
019930
125
1000
1,010
For connecting the ST 100 with additional frames.
Required with large load concentrations. 2 pieces
per frame and vertical metre.
250
Climbing Systems
019810
30
Working Platforms
112
Ø10
perm. p [kN/m²]
10,0
369
Service
1000
60
Mounted on Ledger UH.
96
6,960
245
106092
Bridge- and
Tunnel Formwork
307
300
Column Formwork
2280
2400
900
Slab Formwork
Shoring Systems
Climbing Systems
970
Safety Instructions
400
For stacking and transportation of ST 100 Stacking
Tower components.
Capacity:
84 stacking frames + base and head spindles +
diagonals.
700
Item no. Weight kg
065050 124,000
Wall Formwork
Formwork Girders
1020
026415
026417
026411
026412
026413
026414
026419
026418
3,550
0,000
3,550
7,100
10,650
14,200
17,750
21,600
L
m
m
m
m
m
m
1000
2000
3000
4000
5000
6000
L
Service
1,120
Note
Wrench size SW 19.
(9)
017020
Bridge- and
Tunnel Formwork
Working Platforms
Ø48,3x3,2
SW 19
370
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
SW 19
Wall Formwork
Formwork Girders
Note
Wrench size SW 19.
371
Service
Item no. Weight kg
017010
1,400
(27)
Service
372
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
379
380
379
380
379
380
379
380
380
379
380
379
379
377
383
383
383
383
379
376
378
378
378
378
378
378
376
378
378
378
378
Climbing Systems
Ledger UH 200
Ledger UH 25
Ledger UH 25
Ledger UH 250
Ledger UH 250
Ledger UH 300
Ledger UH 300
Ledger UH 400
Ledger UH 50
Ledger UH 50
Ledger UH 75
Ledger UH 75
Locking Pin Ø 48
Section Spindle UJK 38-110/41
Shoring Brace UBS 150/100
Spigot ULT 32
Spindle Head SRU
Standard UVR 100
Standard UVR 150
Standard UVR 200
Standard UVR 300
Standard UVR 400
Standard UVR 50
Top Standard UVH 100
Working Platforms
114645
104780
114613
100025
114648
100027
114651
100029
104779
114595
100017
114629
111053
111072
107801
107810
115504
115291
100301
109630
101306
102860
100009
100012
100013
102859
028590
100000
100003
100005
100007
Bridge- and
Tunnel Formwork
374
374
374
377
375
376
377
377
375
375
374
379
382
382
382
382
382
382
382
382
382
382
383
383
383
383
383
383
383
383
382
382
382
382
382
382
382
382
382
382
382
382
381
381
381
381
381
381
381
381
381
381
381
381
381
381
381
381
381
381
380
379
380
379
380
379
380
Adj. Base Plate UJB 38-50/30
Base Plate UJP
Base Standard UVB 24
Cross Strap, galv.
Handle Lock UJS
Head Spindle Locking Device UJH
Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv.
Horizontal Brace UBH 150/150
Ledger Brace UBH Flex 250/250
Ledger Brace UBL 100/150
Ledger UH 100
Ledger UH 100
Ledger UH 125
Ledger UH 125
Ledger UH 150
Ledger UH 150
Ledger UH 200
373
Service
100411
100242
100244
100014
019950
018300
100863
109563
019790
116081
019780
100719
100042
107815
100047
106931
104356
100049
100051
123483
102617
100053
106092
106880
107002
108380
108540
108689
104029
105925
114928
114818
114821
114912
114820
114916
114819
114920
114892
114924
114932
114936
115513
115157
115156
100055
102846
100057
107867
100059
102862
100061
104391
100063
102861
100065
100067
104766
100069
104762
101159
114632
110347
114638
100021
114641
100023
Shoring Systems
Formwork Girders
Item no. Weight kg
100244
1,230
Base Plate UJP
Without height adjustment.
31,8
3,330
100
150
150
100
30
Slab Formwork
505
Ø10
Ø17
With captive yellow quick jack nut.
38
Climbing Systems
100
Ø10
min 45
30
max 595
150
805
Shoring Systems
4,520
Ø17
With captive red quick jack nut.
38
100242
Ø10
130
105
100411
min 45 max 355
Column Formwork
Wall Formwork
Ø13
Working Platforms
Ø17
019780
5,160
For heavily loaded shoring.
Note
38
Bridge- and
Tunnel Formwork
140
Service
min 47
710
max 535
110
80
Ø19
Ø21
Ø10
Ø14
374
Formwork Girders
Note
Wall Formwork
240
170
Maximum inclination of the head plate on all
sides 4.4%.
Note
37,5
85
37,5
50
170
Shoring Systems
6,360
Ø13
110
80
717
Ø19
Ø14
Ø10
160
min 51
max 535
190
Ø21
38
6,950
Maximum inclination of the head plate on all sides
4.4%.
Note
With locking device and captive Quick Jack Nut.
37,5
80
170
85
37,5
Ø10
240
max 535
80
76
Ø19
687
Ø14
160
min 60
Bridge- and
Tunnel Formwork
116081
Ø 38
028590
018300
0,568
0,564
Climbing Systems
019790
Accessories
Working Platforms
0,568
Ø10
Accessories
Cross Strap, galv.
375
Service
028590
Column Formwork
38
Slab Formwork
85
710
min 47
max 535
195
Ø6,5
Tilt-resistant head spindle for holding one or two
GT 24 or VT 20 girders.
155
Item no. Weight kg
019950
7,690
Item no. Weight kg
028590
0,568
Spindle TR 38.
Note
Wrench size SW 19.
Wall Formwork
270
210
110
Formwork Girders
Column Formwork
SW 19
Cross Strap, galv.
For fixing Steel Walers SRZ and SRU on the
Adjustable Crosshead Spindle TR 38.
150
0,310
109630
4,150
Spindle Head SRU
For connecting the shoring to Steel Walers SRU
and SRZ.
Note
With captive nut.
Bridge- and
Tunnel Formwork
700
Working Platforms
60
376
10
Accessories
37
018350
Climbing Systems
Shoring Systems
Ø20
Service
50
0,564
Slab Formwork
018300
50
Formwork Girders
Item no. Weight kg
111072
6,190
For erection of shoring with tower units.
100863
1,030
Handle Lock UJS
Secures the Adjustable Base Plate in the Standard
when moving.
Column Formwork
Slab Formwork
300
min 65
max 410
1100
Wall Formwork
38
Note
Wrench size SW 19.
Shoring Systems
138
Secures Head Spindle and top Ledger UH in the
Standard when moving.
Complete with
Technical Data
Permissible load 1.8 kN.
Climbing Systems
1,460
For assembly directly on the base spindle.
377
Service
Ø11
160
Ø 48,3
470
230
2,470
120 120
100014
85
Bridge- and
Tunnel Formwork
115
Working Platforms
198
109563
70
67
SW 19
Item no. Weight kg
102859
101306
102860
100009
100012
100013
3,080
5,380
7,690
9,990
14,700
19,200
Standards UVR
Standard UVR 50
Standard UVR 100
Standard UVR 150
Standard UVR 200
Standard UVR 300
Standard UVR 400
L
500
1000
1500
2000
3000
4000
L
Slab Formwork
N x 500
Column Formwork
120
Ø13
160
380
Ø11
4,610
6,920
9,230
11,500
Top Standard UVH
Without pins for supporting head spindles.
L
1000
1500
2000
2500
120
100000
100003
100005
100007
Working Platforms
Bridge- and
Tunnel Formwork
380
L
500
Ø 48,3
Ø11
378
160
Climbing Systems
Shoring Systems
Ø 48,3
Service
160
Formwork Girders
Wall Formwork
Formwork Girders
Ø38
Column Formwork
0,059
Locking Pin Ø 48
As tension-proof connection of standards.
Ø10
49
100719
0,060
As tension-proof connection of standards for suspended scaffold or lattice girders.
Slab Formwork
111053
Accessories
Locking Pin Ø 48
25
Shoring Systems
0,059
0,060
68
111053
100719
Wall Formwork
Spigot ULT 32
Lose pin for connecting scaffold tubes Ø 48.3
mm, e.g. top standards and lattice girders.
320
Item no. Weight kg
100301
1,020
Note
Wrench size SW 16.
70
Climbing Systems
SW 16
M10
Sticker
Working Platforms
X
250
500
750
1000
1250
1500
2000
2500
White
White
White
Red
Bridge- and
Tunnel Formwork
L
204
454
704
954
1204
1454
1954
2454
Note
Longitudinally-stamped with coloured label for
easier identification.
Ø22
X
L
125
125
379
Service
Ledgers UH (as of 01.07.2009)
Ledger UH 25
Ledger UH 50
Ledger UH 75
Ledger UH 100
Ledger UH 125
Ledger UH 150
Ledger UH 200
Ledger UH 250
Ledger UH 300
Ledger UH 400
60
1,440
2,080
2,760
4,490
5,450
4,730
6,060
7,380
8,700
11,400
30
114613
114595
114629
114632
114638
114641
114645
114648
114651
114654
104780
104779
100017
101159
110347
100021
100023
100025
100027
100029
Ledgers UH (to 30.06.2009)
Ledger UH 25
Ledger UH 50
Ledger UH 75
Ledger UH 100
Ledger UH 125
Ledger UH 150
Ledger UH 200
Ledger UH 250
Ledger UH 300
Ledger UH 400
L
X
Sticker
204
250
454
500
704
750
White
954
1000
White
1204
1250
1454
1500
1954
2000
White
2454
2500
Red
2954
3000
Black
3954
4000
Note
Slab Formwork
X
L
Ø22
125
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
30
125
Service
1,390
2,040
2,710
3,370
4,020
4,690
6,020
7,340
8,670
11,300
60
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
380
Formwork Girders
Wall Formwork
Shoring Systems
L
X
Y
Sticker
901
1000
500
1677
1000
1500
2136
1000
2000
1347
1500
500
1601
1500
1000
1953
1500
1500
2358
1500
2000
1820
2000
500
2016
2000
1000
2305
2000
1500
2658
2000
2000
White
2462
2500
1000
2705
2500
1500
3010
2500
2000
Red
2795
3000
500
2926
3000
1000
3133
3000
1500
3400
3000
2000
Black
Note
UBL 150/250 identical to UBL 300/50,
UBL 100/100 identical to Diagonal Strut ST 100
(Art.-Nr. 019940).
25
L
25
Ø42,4
25
Climbing Systems
L
Bridge- and
Tunnel Formwork
Working Platforms
X
Ledger Braces UBL
Mounted in the holes of the ledger.
381
Service
2,670
4,650
5,820
3,800
4,450
5,350
6,390
5,010
5,510
6,250
7,160
6,650
7,270
8,050
7,500
7,840
8,370
9,050
Y
115156
115513
115157
107867
100055
102846
100057
104391
100059
102862
100061
100063
102861
100065
104762
100067
104766
100069
Column Formwork
Item no. Weight kg
Slab Formwork
Formwork Girders
Item no. Weight kg
100042
107815
100047
106931
104356
100049
100051
123483
102617
100053
7,350
8,700
9,870
10,200
11,300
12,400
11,800
12,700
13,800
15,000
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Braces UBH
Brace UBH 150/150
Brace UBH 200/150
Brace UBH 200/200
Brace UBH 250/150
Brace UBH 250/200
Brace UBH 250/250
Brace UBH 300/150
Brace UBH 300/200
Brace UBH 300/250
Brace UBH 300/300
Column Formwork
Wall Formwork
L
2042
2422
2749
2839
3123
3456
3279
3528
3826
4164
X
1500
2000
2000
2500
2500
2500
3000
3000
3000
3000
Y
1500
1500
2000
1500
2000
2500
1500
2000
2500
3000
7
L
10
Slab Formwork
Y
L
Ø48,3
10
114818
114821
114912
114820
114916
114819
114920
114928
114892
114924
114932
114936
Working Platforms
Climbing Systems
Shoring Systems
X
4,580
5,720
6,650
7,000
8,730
8,350
9,830
10,800
9,730
11,000
11,900
12,900
Ledger Brace UBH-Flex
For horizontal bracing of towers underneath the
decking.
L
1335
1725
2042
2161
2749
2620
3123
3456
3092
3528
3826
4163
X
1000
1500
1500
2000
2000
2500
2500
2500
3000
3000
3000
3000
Y
1000
1000
1500
1000
2000
1000
2000
2500
1000
2000
2500
3000
10
L
7
Y
Bridge- and
Tunnel Formwork
L
Ø50
Service
7
X
382
Formwork Girders
Item no. Weight kg
Shoring Braces UBS
Standard brace for shoring towers.
L
1792
2122
2219
2492
X
1500
1500
2000
2000
Y
1000
1500
1000
1500
Wall Formwork
5,260
6,060
6,360
7,050
Y
L
Ø42,4
Column Formwork
107801
107810
115504
115291
Shoring Systems
perm. p [kN/m²]
10,0
10,0
10,0
10,0
10,0
10,0
7,5
5,0
Climbing Systems
X
Working Platforms
Bridge- and
Tunnel Formwork
X
500
750
1000
1250
1500
2000
2500
3000
383
Service
50
75
100
125
150
200
250
300
60
Industrial Decks UDI 25
Industrial Deck UDI 25 x
Mounted on Ledger UH.
96
4,100
5,530
6,960
8,390
9,800
12,700
15,500
18,400
245
104029
105925
106092
106880
107002
108380
108540
108689
Slab Formwork
X
Service
384
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
388
390
388
392
388
389
389
389
386
394
392
393
390
387
393
393
394
394
393
394
394
387
392
391
391
391
386
386
386
386
386
394
394
394
394
394
394
394
390
387
395
392
395
392
388
387
Base Adapter HD
Base Plate HD
Brace Connector HDR
Centring Bar 40 x 20 x 400 mm
Centring Bolt HD M12, galv.
Compression Brace Spindle HD
Compression Head HD
Coupling Section HD30
Double Anchor Tie Yoke HDD
Guardrail Post HSGP
Head Spindle HDK45
Height Compensation HD, h = 200 mm
Ladder 180/6, galv.
Ladder Base, galv.
Ladder Connector HD 200
Ladder Hook, galv.
Lowering Device HDA
Main Beam Clamp HD 70 mm, galv.
Main Beam HDT 280
Main Beam HDT 440
Main Beam HDT 880
Prop Section HDS 270 Alu
Prop section HDSS 210 Steel
Prop Section HDSS 90 Steel
Scaffold Bracket HD 75
Shear Pin HDA
Steel Beam Clamp IPB 300 - 1000
Trolley HD
Wedge Lowering Device 420 kN
Wing Nut Spanner HD
385
Service
022019
022024
022016
022025
022013
022023
022022
028080
022020
026417
022011
103724
034580
022007
101916
051410
051460
104646
103718
051450
104132
022003
106183
022010
022009
022008
022004
022006
022005
103993
111276
026411
026412
026413
026414
026419
026418
026415
022017
022018
017020
022026
017010
022021
024590
022027
Formwork Girders
Item no. Weight kg
022006
022005
022004
111276
103993
5,310
11,200
29,700
28,200
63,500
Prop Section HDS / HDSS
Prop sections made of aluminium or steel. With
chord couplings for connecting to other sections.
L
X
340
300
940
900
2740
2700
940
900
2140
2100
Note
A maximum 2 x HDS 30 Alu may be used with the
steel prop sections!
X
L
Slab Formwork
Column Formwork
Wall Formwork
243
Climbing Systems
022020
3,310
Prop sections made of aluminium or steel. With
chord couplings for connecting to other sections.
273
225
Shoring Systems
Ø 48
Note
A maximum 2 x HDS 30 Alu may be used with the
steel prop sections!
243
Service
Bridge- and
Tunnel Formwork
386
273
225
290
Working Platforms
Ø 48
Formwork Girders
Wall Formwork
Note
Always install spindled out. Do not use impact
wrench due to Shear Pin HDA, Item no. 022018
breaking!
250
Slab Formwork
Shoring Systems
Head Spindle HDK45
Head spindle for heavy-duty prop HD 200. With
integrated chord couplings for connecting the
chord tubes. Can be tilted up to 3° along one axis.
Note
Loads > 60 kN are not removable with the Head
Spindle HDK 45!
666
min 410
360
Ø13
50
120
50 55
330
022027
4,230
Accessories
Wing Nut Spanner HD
Bridge- and
Tunnel Formwork
4,230
Wing Nut Spanner HD
For easy release of the Head Spindle HDK 45 and
MULTIPROP slab props.
985
022027
Climbing Systems
25,700
Working Platforms
022007
Shear Pin HDA
For mounting in the Lowering Device HDA.
Ø48
387
Service
0,002
220
022018
Accessories
Shear Pin HDA
180
0,002
300
max 860
022018
Column Formwork
min 242
453
Lowering Device HDA
For easy release of higher loads with the HD 200.
Lowering range max. 10 cm. Tiltable on all sides
up to 3°.
max 344
Item no. Weight kg
022003
31,400
Item no. Weight kg
024590
32,000
For releasing and lowering large loads.
Wall Formwork
Formwork Girders
Note
Take type test into consideration.
Wrench size SW 46.
Technical Data
Bearing capacity 420 kN.
230
Column Formwork
min 168
max 268
260
022013
0,137
For the HD 200 system.
35
80
Slab Formwork
SW 19
M 12
022019
18,500
Base Adapter HD
For using HD 200 Prop Sections on the Wedge
Lowering Device 420 kN. With removable centring.
325
Climbing Systems
Shoring Systems
Complete with
1 pc. 710330 Nut ISO 4032 M12-8, galv.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
75
Brace Connector HDR
to HDS and HDSS Prop Sections.
14
Service
1,300
130
171
022016
Bridge- and
Tunnel Formwork
Working Platforms
295
388
Ø16x42
60
to Main Beam HDT.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Technical Data
Permissible tension force 14,9 kN under 30°.
Permissible compressive force 31,6 kN under 30°.
100
Column Formwork
200
12
85
Ø25
Formwork Girders
Item no. Weight kg
028080
2,970
Wall Formwork
295
Ø36
Working Platforms
Compression Head HD
For using Prop Sections HDS and HDSS as props
(also inclined).
295
325
110
225
Bridge- and
Tunnel Formwork
389
Service
22,000
125
022022
Climbing Systems
265
min 523
Shoring Systems
Slab Formwork
(also inclined). Only in connection with Base Plate
HD!
max 990
22,200
870
022023
Formwork Girders
Item no. Weight kg
022024
13,200
Base Plate HD
(also inclined).
Complete with
1 pc. 722465 Bolt 35 x 160, galv.
1 pc. 710304 Cotter Pin 7, galv.
175
Wall Formwork
Ø52
Ø36
300
400
Ø26
Ø22
120
Column Formwork
Ø32
5,040
For assembly of working scaffold. With nailing
batten.
Slab Formwork
022017
Complete with
1 pc. 034580 Guardrail Post HSGP
Technical Data
034580
3,520
034580
3,520
Accessories
Guardrail Post HSGP
Guardrail Post HSGP
Service
Bridge- and
Tunnel Formwork
65
390
35
1300
1050
440
120
Working Platforms
Climbing Systems
100
370
Shoring Systems
855
Formwork Girders
Wall Formwork
Complete with
1 pc. 105435 Bolt Ø 50 x 330, galv.
Technical Data
Wy = 1680.0 cm³, Iy = 25170 cm4
8980
3200
3200
1095
100
300
250 950
195
Ø25
582,000
Main Beam HDT 440
System steel girder for use with HD 200 main
beam areas and special constructions.
Profile HEB 300.
Complete with
1 pc. 105435 Bolt Ø 50 x 330, galv.
Technical Data
Wy = 1680.0 cm³, Iy = 25170 cm4
Shoring Systems
022009
Slab Formwork
21 x 400 = 8400
120
200
Column Formwork
105
8800
300
100
4580
950
2000
1095
100
300
250
Ø25
Complete with
1 pc. 105435 Bolt Ø 50 x 330, galv.
Technical Data
Wy = 1680.0 cm³, Iy = 25170 cm4
2980
250
1150
1295
100
200
100
2800
6 x 400 = 2400
Ø25
195
Main Beam HDT 280
Profile HEB 300.
120
379,000
300
022010
195
Working Platforms
10 x 400 = 4000
120
200
Climbing Systems
105
4400
300
100
Bridge- and
Tunnel Formwork
Main Beam HDT 880
Profile HEB 300.
105
391
Service
Item no. Weight kg
022008 1130,000
For centring crossbeams on the Main Beam HDT.
400
Column Formwork
022011
13,200
For anchoring with Tie Rod DW 15 and DW 20.
40
20
Item no. Weight kg
022025
1,970
Wall Formwork
Formwork Girders
Technical Data
600
500
161
022021
31,900
Trolley HD
For moving longitudinal girders on the Main Beam
HDT.
80 157
663
Technical Data
Bearing capacity 2.5 t.
2,200
For connecting crossed girders.
410
1,780
130
392
50
For providing protection against tipping.
70
022026
37
54
22
320
Safety Instructions
150
Service
800
1043
16-70
106183
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Ø 60
Ø25
Ø25
72
88
Formwork Girders
For height compensations of 200 mm.
051410
11,700
Column Formwork
0,334
0,100
300
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
Ladder 180/6, galv.
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
026430
022250
Wall Formwork
200
295
120
200
190
Ø25
5 x 298 = 1490
Slab Formwork
Item no. Weight kg
101916
22,500
83
Shoring Systems
1960
Working Platforms
Bridge- and
Tunnel Formwork
10,400
SW 18
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
103724
Climbing Systems
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Wrench size SW 18.
298
1200
1885
393
Ladder Hook, galv.
pairs.
Service
0,684
330
103718
Ladder Base, galv.
210
Item no. Weight kg
051460
2,180
405
104646
4,170
For connecting ladders to HD 200 prop sections.
Shoring Systems
50
Complete with
725
230
178
626
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
468
104132
051450
15,600
25,200
Complete with
Service
3,550
0,000
3,550
7,100
10,650
14,200
17,750
21,600
704
750 / 1500
026415
026417
026411
026412
026413
026414
026419
026418
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
710
L
m
m
m
m
m
m
1000
2000
3000
4000
5000
6000
L
Ø48,3x3,2
394
Formwork Girders
Note
Wrench size SW 19.
Wall Formwork
SW 19
Column Formwork
Note
Wrench size SW 19.
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
SW 19
Bridge- and
Tunnel Formwork
1,400
(27)
017010
395
Service
(9)
Item no. Weight kg
017020
1,120
Service
396
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
408
410
409
408
408
406
407
406
405
401
407
402
405
405
402
401
400
400
399
398
403
402
405
399
409
409
406
403
407
403
407
407
404
410
401
405
404
408
405
405
404
406
Advancing Screw M24, galv.
Anchor Loop
Anchor Sleeve M24
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Compression Strut FB-2
Cone for Bolt Anchor Sleeve M24
Corner Frame FBE
End Guardrail Frame 55
Finishing Platform Bracket FBN-2
Finishing Platform FBN-2/300
Folding Bracket FB 180-3, compl.
Folding Corner Platform FEB 180-3/300
Folding Platform FB 180-3/300
Guardrail Extension FB
Guardrail Post FBP
Intermediate Platform FBZ 240
Loop Mounting Head-2 FB, galv.
Mounting Extension ASG for Loop
Mounting Head FB
Pipe Bracing Connector, galv.
Plug Ø 26 mm for Bolt Anchor Sleeve M24
Safety Net 6.0 x 2.0 m
Screw on Cone-2 M24/DW 20, galv.
Support Extension 300 FB-2
Tension Belt Connector Wall
Tension Belt, l = 5.70 m, 25 kN
Tie Rod B 15 l = 0.30 m
Transportation Fork FB, galv.
Wall Scaffold Hinge FB
397
Service
029270
027212
026636
029280
026420
026230
029560
026430
715357
026627
026240
026626
018060
030050
065066
026631
026625
026652
026649
026648
026635
026628
030070
026622
026645
026638
026632
026644
026250
026530
029470
114158
026647
031480
026624
051270
051250
030860
030740
030150
026646
026990
Item no. Weight kg
026648 318,000
Work and safety scaffold according to DIN EN
12811 and DIN 4420. With continuous 45 mm
thick decking and foldable handrail frame.
Technical Data
For special applications up to 450 kg/m2.
Column Formwork
Wall Formwork
Formwork Girders
240
2500
240
2980
Climbing Systems
2055
Shoring Systems
1040
Slab Formwork
Ø48,3
Service
Bridge- and
Tunnel Formwork
Working Platforms
2000
398
Formwork Girders
Technical Data
Wall Formwork
Corner platform which can be used on the left and
right. Assembled from folding platform and Corner
Frame FBE.
2500
240
2056
240
Column Formwork
1040
Item no. Weight kg
026649 478,000
Climbing Systems
Technical Data
1800
Working Platforms
2407
1641
Bridge- and
Tunnel Formwork
1420
1740
126
399
Service
As intermediate platform, or with accessories
used as end platform. With continuous 45 mm
thick platform decking and foldable handrail frame.
1080
113,000
1030
026622
Shoring Systems
Slab Formwork
2980
Item no. Weight kg
026652
82,000
For assembly of special platforms in connection
with FBZ intermediate platforms as telescopic end
platform.
Wall Formwork
Ø48,3
316
1120
2010
18 x 50 = 900
Column Formwork
385
1085
Ø9
2055
Formwork Girders
Slab Formwork
160
Ø17
95
180
2000
18 x 80 = 1440
Shoring Systems
40
116,000
With continuous 45 mm thick platform decking
and foldable guardrail frame.
Technical Data
Working Platforms
Climbing Systems
026625
Service
806
900
026624
400
42,300
Accessories
1260
Bridge- and
Tunnel Formwork
1041
2980
Formwork Girders
Item no. Weight kg
026631
16,100
For assembling special finishing platforms.
1085
Wall Formwork
Ø9
175
Ø48,3
170
Column Formwork
885
42,300
For extending the bottom pressure point.
Note
Adjustable from 1.30 m to 3.00 m in 10 cm increments.
Shoring Systems
3013
Working Platforms
200
For use with Support Extension 300 FB-2.
3234
152
21,200
120
180
026627
80
Bridge- and
Tunnel Formwork
433
401
Service
238
Climbing Systems
175
17 x 100 = 1700
Slab Formwork
026624
Corner Frame FBE
For the use of the Folding Platform FB 180-3/300
as corner platform left and right on building corners.
Complete with
6 pc. 070890 Nut ISO 7042 M16-8, galv.
500
1000
Column Formwork
1928
1000
7,120
438
Guardrail Post FBP
For assembly of a lateral guardrail on the FB 180.
Bolted on from above.
120
026628
Shoring Systems
Slab Formwork
2400
72
90
120
065066
15,100
DW 15
Clampable end handrail for all PERI scaffold platforms and climbing systems.
Service
max 417
Bridge- and
Tunnel Formwork
1360
1020
Working Platforms
Climbing Systems
382
1005
503
Ø 48,3
560
402
400
2137
Item no. Weight kg
026626 177,000
Wall Formwork
Formwork Girders
Formwork Girders
For connecting Scaffold Tube Ø 48.3 mm to the
Folding Bracket FB 180 for special platforms.
Complete with
2 pc. 070890 Nut ISO 7042 M16-8, galv.
260
100
Wall Formwork
30
Item no. Weight kg
026644
2,330
30
100
M 16x45
Column Formwork
60
159
Slab Formwork
For increasing the height of the guardrail up to
h = 2.00 m when using the FB 180 as safety scaffold.
Shoring Systems
Ø 38
Technical Data
Mains Type A2 according to DIN EN 1263-1.
Energy consumption 4,2 kJ. Colour: green.
Approved by the Bau-BG (Employers´ Liability
Insurance Association for the building industry).
Bridge- and
Tunnel Formwork
100
6000
Safety netting made of high-strength polypropylene for safety scaffolding. 5 mm thick, knotless.
2000
2,400
100
026530
Climbing Systems
1141
991
Ø48,3
Working Platforms
3,690
403
Service
026635
Item no. Weight kg
026646 199,000
For moving completely assembled platform units.
Safety Instructions
Column Formwork
Wall Formwork
Formwork Girders
1301
Slab Formwork
2889
4589
120
1621
80
1500
1260
Shoring Systems
026647
0,673
15
For mounting and assembling TRP, FB 180 and
RUNDFLEX Plus platforms.
115
100
051250
2,790
60
Climbing Systems
1756
Working Platforms
Bridge- and
Tunnel Formwork
705
Ø25x180
Technical Data
Service
1000
min 1600
404
max 5700
Formwork Girders
Wall Formwork
To prevent tipping over due to wind loads with
tension belt. Mounted on the wall or to the strut
of the Bracket SKS 180.
0
Item no. Weight kg
051270
1,620
12
Ø50
80
Ø25
100
0,334
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
715357
0,243
Column Formwork
026430
12
Slab Formwork
150
120
018060
0,030
Ø16
Shoring Systems
Ø5
0,222
Note
Wrench size SW 30.
Technical Data
Working Platforms
030070
Climbing Systems
Ø4
50
SW 30
Tie Rods B 15
Tie Rod B 15 l = 0.30 m
Note
Technical Data
1,550
0,000
0,420
B 15
405
Service
030740
030050
030150
Bridge- and
Tunnel Formwork
DW 15
Item no. Weight kg
026632
6,250
Mounting Head FB
For mounting the folding platform on the Wall
Scaffold Hinge FB or Scaffold Mounting Ring M24.
Column Formwork
329
Wall Formwork
46
125
35
75
25
For attaching the Folding Platform FB 180 with
Mounting Head FB. Allows mounting point to be
moved ± 2.5 cm laterally..
39
26
65
026430
0,334
026430
0,334
Climbing Systems
Shoring Systems
55
200
2,870
Slab Formwork
026990
130
70
Formwork Girders
110
130
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
systems.
Note
Wrench size SW 36.
70
Working Platforms
SW 36
M24
026230
1,010
Anchor Sleeve M24
To anchor platform systems.
Note
100
Service
Bridge- and
Tunnel Formwork
68
8
120
12
DW 20
026240
026250
406
0,026
0,005
Accessories
Plug Ø 26 mm for Bolt Anchor Sleeve
Ø 31
15
Formwork Girders
Item no. Weight kg
026240
0,026
Results in a concrete cover of 24 mm.
39
50
For closing the cone for the Anchor Sleeve M24.
Column Formwork
0,005
Ø 26
Ø 23
27
Tie System M24.
Note
Shoring Systems
0,723
Ø73
029470
029560
0,535
Accessories
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
systems.
Note
Wrench size SW 36.
Working Platforms
0,535
Climbing Systems
73
029560
120
M24
1,030
Tie System M24.
Bridge- and
Tunnel Formwork
SW 36
114158
Slab Formwork
Ø31
026250
Wall Formwork
24
Note
Wrench size SW 36.
0,801
70
Accessories
407
Service
030860
65
M 24
DW 20
150
SW 36
Item no. Weight kg
030860
0,801
concrete.
Note
Lost anchor part.
Wall Formwork
65
DW 20
100
Ø6
Column Formwork
32
Formwork Girders
0,331
Note
Wrench size SW 19.
70
M 24
SW 19
029280
0,196
029280
0,196
Climbing Systems
Shoring Systems
Slab Formwork
029270
Accessories
80
Ø7
Bridge- and
Tunnel Formwork
Working Platforms
Ø25
60
029440
0,005
026420
0,123
6
Accessories
Note
Allen Key SW 14.
60
SW 14
Ø5
M 24
40
Service
027212
710312
408
0,445
0,005
Accessories
Nail 3 x 80
Formwork Girders
Wall Formwork
For mounting the Folding Platform FB 180 on the
Anchor Loop.
146
146
17,800
For mounting the Folding Platform FB 180 in a
60 cm to 70 cm lower position
124
Note
Always use in pairs.
Bridge- and
Tunnel Formwork
740
224
409
Service
120
Anchor Loop
80
1,140
10
026636
117
Working Platforms
200
Climbing Systems
985
Shoring Systems
700
Slab Formwork
026638
Column Formwork
375
Item no. Weight kg
026645
5,460
Item no. Weight kg
031480
2,460
Column Formwork
Wall Formwork
Formwork Girders
510
027212
0,445
M30 and M36.
SW 14
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
230
410
Service
411
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
412
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
418
416
417
417
417
414
416
418
417
419
415
415
418
414
414
417
418
418
416
418
415
Anchor Loop
Anchor Sleeve M24
Bolt ISO 4014 M24 x 70-10.9, galv.
Bracket ASG 70-100
Cavity Wall Bracket ASG
Clip for Console Bracket ASG 70-100
Guardrail Post HSGP
Mounting Plate ASG
Nail 3 x 80
Platform ASG 70-100/240
Plywood board 2400 x 470
Sleeve for Cavity Wall Bracket ASG
Wall Scaffold Hinge ASG
413
Service
027212
026636
026420
026230
026430
105845
108870
105907
026240
710326
034580
026536
710312
105843
105844
026250
105842
105841
108869
031480
026531
Item no. Weight kg
105843
105844
46,400
51,300
Platforms ASG 70-100
Bracket platform with robust decking for tight
workspaces. Telescopic. Platform width can be
increased through installation of planking.
Column Formwork
Wall Formwork
Formwork Girders
Technical Data
200/
240
2000 / 2500
200/
240
2400 / 2980
min 771 max 1051
470
034580
026531
3,520
7,780
105845
12,800
Working Platforms
Climbing Systems
Shoring Systems
822
Slab Formwork
146
Accessories
Guardrail Post HSGP
Bracket ASG 70-100
As individual bracket or for special platforms with
planking.
Service
112
822
Bridge- and
Tunnel Formwork
min 771 max 1051
90
034580
026531
105907
414
3,520
7,780
0,245
Accessories
Guardrail Post HSGP
Formwork Girders
Guardrail Post HSGP
35
Column Formwork
65
1300
1050
440
Wall Formwork
120
Item no. Weight kg
034580
3,520
Slab Formwork
71
Shoring Systems
Note
No use possible near external corners where brickwork is continued.
Ø22
Working Platforms
Mounting Plate ASG
For subsequent formation of mounting points for
ASG platforms. The wall is continued above the
mounting plate, which is subsequently withdrawn
from the inside. Fixing with flush-fitted, removable
heavy-duty expansion bolts.
750
Bridge- and
Tunnel Formwork
11,200
026536
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
Anchor Sleeve M24
80
0,334
1,010
220
026430
026230
150
Climbing Systems
180
112
240
200
Ø25
415
Service
7,780
40
026531
Item no. Weight kg
108870
6,730
Adapter for mounting of ASG 70-100 Platforms in
pre-cast cavity walls. For use without lost parts.
Complete with
1 pc. 108869 Sleeve for Cavity Wall Bracket ASG
Note
The maximum live load on the ASG 70-100
Platforms is 150kg/m². The load-bearing capacity of
the cavity wall must be proven separately.
98
108869
Climbing Systems
0,712
Elastic and can be re-used many times.
Note
Before concreting, spray with PERI concrete
release agent.
335
72
67
Working Platforms
026636
1,140
Anchor Loop
Note
Always use in pairs.
740
80
Bridge- and
Tunnel Formwork
120
10
224
Service
68
402
Shoring Systems
Slab Formwork
Column Formwork
520
Wall Formwork
Formwork Girders
416
Item no. Weight kg
026230
1,010
Anchor Sleeve M24
Note
Formwork Girders
100
8
120
Wall Formwork
68
15
Ø 31
12
026240
026250
0,026
0,005
026240
0,026
Column Formwork
DW 20
Accessories
Slab Formwork
39
026250
0,005
Shoring Systems
Ø31
50
24
0,334
Bolt ISO 4014 M24 x 70-10.9, galv.
systems.
Note
Wrench size SW 36.
Working Platforms
026430
Climbing Systems
Ø 26
Ø 23
27
70
SW 36
026420
0,123
Bridge- and
Tunnel Formwork
M24
Note
Allen Key SW 14.
60
SW 14
Ø5
M 24
40
0,445
0,005
Accessories
Nail 3 x 80
417
Service
027212
710312
Formwork Girders
Item no. Weight kg
710312
0,005
Nail 3 x 80
80
Column Formwork
Wall Formwork
Ø3
031480
2,460
027212
0,445
M30 and M36.
SW 14
230
105842
105841
19,600
24,500
Plywood boards
Service
2400 / 2980
0,245
57
710326
418
0,030
39
124
Accessories
50
105907
61
Bridge- and
Tunnel Formwork
Working Platforms
470
Climbing Systems
Shoring Systems
Slab Formwork
510
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
22
M8
SW 13
Wall Formwork
Item no. Weight kg
710326
0,030
Formwork Girders
With hex. nut.
419
Service
60
Service
420
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Shoring Systems
433
433
430
431
437
438
439
424
424
430
426
426
427
427
433
434
434
434
441
434
426
426
441
Climbing Systems
Screw-On Coupler AK 48, galv.
Side Guardrail Post
Sliding Hatch Cover
Spacer for Platform Beam BR
Strongback CB 270
Strongback CB 380
Tension Anchor Connector CB
Tension Belt Connector CB
Tie Rod B 15 l = 0.30 m
Waler Fixation U100-U120
Wall Tension Anchor
Working Platforms
029470
114158
017040
051610
051430
031480
020620
051060
051150
017010
107007
051260
051270
051250
030860
030840
030150
030740
030740
030030
110059
107008
030370
Bridge- and
Tunnel Formwork
425
424
435
438
435
435
441
440
433
427
442
422
423
422
434
442
425
439
423
430
434
441
434
432
432
432
432
432
427
440
439
430
429
429
429
437
425
441
440
440
431
436
436
436
436
437
437
437
435
431
438
438
438
438
424
428
442
428
423
438
430
430
430
430
430
430
430
Adjustable Brace CB 164-224
Adjusting Unit CB 160
Anchor Sleeve M24
Bearing Box BR
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Carriage CB 240
Climbing Bracket CB 160
Connector TRIO-CB
Crane Eye BR 2,5 t
Crane Eye CB 240
F.H. Bolt DIN603 M8 x 180 MU, galv.
Finishing Platform Beam CB
Folding Bearing Plate 25
Gravity Pivot Plate BR
Guardrail Connector CB
Handrail Post CB 190
Hatch 55 x 60, foldable
Height Adjusting Unit CB
Intermediate Handrail Post CB
Ladder 180/6, galv.
Ladder 220/6
Ladder Base 30 adjustable, galv.
Ladder Base, galv.
Ladder Hook, galv.
Platform Beam BR U100
Platform Connection CB 160
Platform Post CB 225
Post Extension CB 180
Rack CB 240
Ratchet Lever SW 19
421
Service
051110
051130
029270
027212
029280
026420
026230
108162
029560
026430
026430
051020
051100
051000
031220
026240
051090
105401
051010
026417
030050
030050
030050
065066
051650
710240
024360
108834
051230
020330
020600
051160
051210
051190
051220
110608
051030
030070
024070
024080
051630
051410
051420
109105
051460
103718
051450
104132
029440
051640
020320
020510
020310
020520
051120
051200
026250
051050
051040
027180
026411
026412
026413
026414
026419
026418
026415
Slab Formwork
Item no. Weight kg
051000 112,000
Complete Climbing Scaffold Bracket CB 240.
Complete with
1 pc. 715977 Guardrail Post CB 240
1 pc. 070890 Nut ISO 7042 M16-8, galv.
Note
Delivery condition: handrail post in transport securing device.
3214
400
440
2326
350
30
1100
Column Formwork
440
50
Wall Formwork
Formwork Girders
1800
Slab Formwork
228
Shoring Systems
2411
33,900
Climbing Systems
051020
Carriage CB 240
For assembly on the Climbing Bracket CB 240.
Can be installed in 2 positions: for decking support
with GT 24 girder or timber 8 x 16.
Complete with
1 pc. 710944 Key Wedge, FW
Note
Wrench size SW 19.
1175
027180
051040
Service
Bridge- and
Tunnel Formwork
Working Platforms
625
90
422
1,760
8,440
Accessories
Ratchet Lever SW 19
Rack CB 240
250
165 /
245
SW 19
Formwork Girders
Item no. Weight kg
051040
8,440
Rack CB 240
For Carriage CB 240.
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
Column Formwork
73
64
Wall Formwork
10
30
33
2240
Slab Formwork
Complete with
1 pc. 018050 Bolt Ø 16 x 65/86, galv.
Safety Instructions
Load-bearing point: capacity 700 kg.
440
50
Working Platforms
Complete with
1 pc. 715977 Guardrail Post CB 240
1 pc. 070890 Nut ISO 7042 M16-8, galv.
Note
Delivery condition: handrail post in transport securing device.
Bridge- and
Tunnel Formwork
440
1521
3135
228
30
1025
Complete Climbing Scaffold Bracket CB 160.
630
79,000
1800
051100
Shoring Systems
62
Climbing Systems
Crane Eye CB 240
For assembly on the Climbing Bracket CB 240
during use as working scaffold.
1606
423
Service
0,930
140
051010
Item no. Weight kg
051130
12,900
For Climbing Bracket CB 160.
Complete with
2 pc. 781053 Nut ISO 7042 M20-8, galv.
Note
Wrench size SW 19.
Wall Formwork
Formwork Girders
Column Formwork
237
SW 19
260
4,560
For mounting platform decking on the Climbing
Bracket CB 160 for use as working scaffold.
Complete with
2 pc. 781053 Nut ISO 7042 M20-8, galv.
Safety Instructions
Load-bearing point: capacity 500 kg.
235
Shoring Systems
55
70
Slab Formwork
051120
83
Working Platforms
Climbing Systems
130
051060
051150
73,400
103,000
Strongbacks CB
Strongback CB 270
Strongback CB 380
For assembling system formwork on Climbing
Brackets CB 240 and 160. For formwork heights
up to 5.40 m.
90
Complete with
Safety Instructions
196
86
Service
240 7 x 60
= 420
424
2730
1430
8 x 60
= 480
Bridge- and
Tunnel Formwork
160
120
Formwork Girders
For height adjustment of VARIO GT 24 elements
on the Strongback CB.
Complete with
Note
Wrench size SW 19.
Wall Formwork
Item no. Weight kg
051030
5,320
240
max 182
82
Ø25
60
25,000
For aligning the Strongback CB.
190
55
Complete with
Slab Formwork
051110
Column Formwork
SW 19
89
1580
max 2240
Shoring Systems
min 1640
Climbing Systems
Complete with
Note
Wrench size SW 19.
Working Platforms
SW 19
Bridge- and
Tunnel Formwork
400
Ø25
425
Service
415
180
Connector TRIO-CB
For fixing TRIO elements to the Strongback CB.
Used on horizontal or vertical struts. With integrated height adjustment.
100
13,500
82
051090
Formwork Girders
Item no. Weight kg
110059
2,620
For fixing VARIO GT 24 elements to Strongback
CB, Steel Waler SRU and V-Strongback SKS.
126
80
107007
3,410
To prevent tipping over due to wind loads with Tie
Rod DW 15.
80 - 145
76
284
120
Complete with
1 pc. 070890 Nut ISO 7042 M16-8, galv.
400
60
Column Formwork
Wall Formwork
Ø16
Working Platforms
64
30
DW 15
Wall Tension Anchor
To prevent tipping over due to wind loads with Tie
Rod DW 15.
Complete with
1 pc. 027170 Bolt Ø 16 x 42, galv.
Ø26
180
4,100
100
107008
Climbing Systems
Shoring Systems
Slab Formwork
M 16x100
DW 15
50
255
100
026430
0,334
051260
3,300
331
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
Belt Connector CB
For connecting Tension Belt L = 5.70 m, 25 kN to
the Brackets CB 240 or CB 160.
Complete with
1 pc. 070890 Nut ISO 7042 M16-8, galv.
60
Bridge- and
Tunnel Formwork
400
59
25
Service
M 16x100
Ø20
426
Formwork Girders
Wall Formwork
To prevent tipping over due to wind loads with
tension belt. Mounted on the wall or to the strut
of the Bracket SKS 180.
0
Item no. Weight kg
051270
1,620
12
Ø50
80
Ø25
100
026430
0,334
Column Formwork
0,334
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
systems.
Note
Wrench size SW 36.
Slab Formwork
026430
12
70
SW 36
051250
2,790
Shoring Systems
M24
Technical Data
1000
max 5700
Complete with
4 pc. 070890 Nut ISO 7042 M16-8, galv.
965
249
80
1230
Ø17
Bridge- and
Tunnel Formwork
M 16x130
16
86
965
427
Service
232
270
For assembling finishing platforms.
80
17,000
150
051230
Working Platforms
Climbing Systems
min 1600
Item no. Weight kg
051200
44,400
For assembling finishing platforms. For concreting
heights up to 3.60 m. In combination with Post
Extension CB 180 for concreting heights from
3.60 to 5.40 m.
Wall Formwork
Complete with
2 pc. 070890 Nut ISO 7042 M16-8, galv.
M 16x130
Slab Formwork
Ø22
30
200
Shoring Systems
500
800
200
Ø17
1000
1750
Column Formwork
710
200
30
86
2510
Formwork Girders
Climbing Systems
051050
26,400
For assembling finishing platforms. In combination
with Platform Post CB 225 for concreting heights
from 3.60 to 5.40 m.
Complete with
2 pc. 070890 Nut ISO 7042 M16-8, galv.
85
1195
1300
Bridge- and
Tunnel Formwork
2040
200
995
500
Working Platforms
200
20
M 16x130
Service
20
200
Ø17
428
Item no. Weight kg
051190
17,400
For assembling guardrails on finishing platforms.
Basic extension for Handrail Post CB 190 and 370.
Complete with
2 pc. 070890 Nut ISO 7042 M16-8, galv.
Formwork Girders
30
Wall Formwork
86
2225
80
280
440
500
Column Formwork
1125
460
M 16x130
385
30
Climbing Systems
Complete with
2 pc. 070890 Nut ISO 7042 M16-8, galv.
200
M 16x130
Bridge- and
Tunnel Formwork
440
80
330
Ø17
429
Service
80
80
440
2155 / 3955
N x 500
Working Platforms
Ø9
1895 / 3695
Handrail Posts CB
For assembling guardrails on finishing platforms.
Handrail Post 190 for concreting heights up to
3.60 m. Handrail Post CB 370 for concreting
heights from 3.60 to 5.40 m.
200
19,000
34,600
30
051210
051220
Shoring Systems
30
60
200
500
820
80
Slab Formwork
440
200
Ø17
026415
026417
026411
026412
026413
026414
026419
026418
3,550
0,000
3,550
7,100
10,650
14,200
17,750
21,600
L
m
m
m
m
m
m
1000
2000
3000
4000
5000
6000
L
1,400
Note
Wrench size SW 19.
(27)
017010
Shoring Systems
Slab Formwork
Ø48,3x3,2
SW 19
0,850
Working Platforms
Climbing Systems
017040
Note
( 12)
SW 30
SW 19
051160
0,894
For assembling scaffold tubes Ø 48 mm on handrail posts.
Note
Wrench size SW 19.
60
Service
9
Bridge- and
Tunnel Formwork
Ø48
SW 19
024140
430
0,033
Accessories
95
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
Formwork Girders
Side Guardrail Post
For assembly of an end guardrail. Bolted to the
platform main beam.
40
Column Formwork
1270
440
440
Wall Formwork
50
Item no. Weight kg
051610
6,940
Ø7
50
190
Ø9
100
Slab Formwork
340
051630
11,000
Accessories
Shoring Systems
0,014
For assembling a guardrail with large cantilevers.
Bolted on the platform main beam.
440
1270
440
Climbing Systems
50
051640
Ø9
110
Accessories
051640
0,014
0,014
280
Note
Wrench size SW 10.
80
SW 10
431
Service
051640
120
50
Bridge- and
Tunnel Formwork
30
Working Platforms
190
230
Ø7
Item no. Weight kg
065066
15,100
max 417
Column Formwork
1360
1020
Wall Formwork
Formwork Girders
051650
0,060
With nut.
Shoring Systems
17
180
M6
Climbing Systems
SW 10
710240
024360
108834
0,050
0,058
0,085
F.H. Bolt DIN 603 M8, galv.
With hex. nut.
L
B
100
80
125
113
180
28
Note
Wrench size SW 13.
L
B
Bridge- and
Tunnel Formwork
Working Platforms
Note
Wrench size SW 10.
24
M6/M8
SW 10 / SW 13
Service
400
432
Ø17 / Ø 21
Slab Formwork
560
Note
Wall Formwork
Tie System M24.
Ø73
Item no. Weight kg
029470
0,723
029560
0,535
Accessories
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
systems.
Note
Wrench size SW 36.
Slab Formwork
0,535
Column Formwork
73
029560
120
M24
1,030
Tie System M24.
Shoring Systems
SW 36
114158
Formwork Girders
Note
Wrench size SW 36.
150
Working Platforms
Bridge- and
Tunnel Formwork
Note
Lost anchor part.
65
DW 20
Ø6
concrete.
433
Service
0,801
70
M 24
030860
Accessories
32
0,801
100
030860
Climbing Systems
65
DW 20
SW 36
Formwork Girders
Item no. Weight kg
031220
1,010
Tie System M24.
Note
Wrench size SW 36.
0,516
1,440
1,550
030840
0,516
Accessories
For use with Tie Rod DW 15 or B 15.
For anchoring in the concrete.
Note
Lost anchor part.
030030
030050
1,440
0,000
Tie Rod DW 15
Note
Non-weldable! Take official approval into
consideration!
Technical Data
DW 15
030740
030050
030150
Bridge- and
Tunnel Formwork
Working Platforms
Ø27
Ø 80
Ø6
Climbing Systems
Shoring Systems
60
DW 15
1,550
0,000
0,420
Tie Rods B 15
Tie Rod B 15 l = 0.30 m
Note
Technical Data
B 15
Service
25
50
M 24
70
DW 15
030840
030030
030740
Slab Formwork
Column Formwork
Wall Formwork
100
SW 36
434
Formwork Girders
Item no. Weight kg
029270
0,331
Note
Wrench size SW 19.
Wall Formwork
70
M 24
0,196
029280
0,196
Accessories
Slab Formwork
029280
Column Formwork
SW 19
80
Ø7
Ø25
0,005
Accessories
029440
0,005
Note
Wrench size SW 10.
Climbing Systems
029440
6
Shoring Systems
60
20
SW 10
026420
0,123
Working Platforms
M6
Note
Allen Key SW 14.
60
Bridge- and
Tunnel Formwork
SW 14
Ø5
M 24
0,445
0,005
Accessories
Nail 3 x 80
435
Service
027212
710312
40
Item no. Weight kg
051410
11,700
Ladder 180/6, galv.
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Wall Formwork
Formwork Girders
5 x 298 = 1490
83
Column Formwork
1960
Ladder 220/6
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
400
3 x 298 = 894
Shoring Systems
2265
5,070
Climbing Systems
109105
For horizontal fixing of ladders on the platform
decking.
95
13,5
0 - 320
525
Working Platforms
170
443
Service
2,180
Ladder Base, galv.
210
051460
Bridge- and
Tunnel Formwork
423
405
436
50
450
12,800
Slab Formwork
051420
Formwork Girders
Complete with
2 pc. 710381 Nut ISO 7042 M12-8, galv.
Note
Wrench Size SW 18.
Wall Formwork
Ladder Hook, galv.
pairs.
330
Item no. Weight kg
103718
0,684
Column Formwork
SW 18
15,600
25,200
Complete with
Slab Formwork
104132
051450
Shoring Systems
704
750 / 1500
710
Climbing Systems
Complete with
4 pc. 710381 Nut ISO 7042 M12-8, galv.
Working Platforms
550
103
560
662
550
6
Self-locking hatch opening for access ladders.
Clear opening dimensions approx. 55 x 60 cm.
386
15,600
6
110608
Bridge- and
Tunnel Formwork
1140
600
60
820
710
437
Service
Sliding Hatch Cover
Non self-locking hatch opening for access ladders.
Clear opening dimensions approx. 73 x 55 cm.
830
37,900
730
051430
Formwork Girders
Item no. Weight kg
027180
1,760
Ratchet Lever SW 19
For moving Carriage CB 240 and SKSF 240.
Note
Wrench size SW 19.
027200
0,100
031480
2,460
Accessories
Insert Socket SW 19
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
795
510
027212
0,445
M30 and M36.
230
020320
020510
020310
020520
21,800
27,400
32,800
38,600
Platform Beams BR
As cross beam for shaft platforms.
Note
The specified item no. is for the platform beams
only (2 pieces). Required accessories are to be
ordered separately.
700
700
700
700
Service
52
020620
105401
020330
020600
438
0,561
2,210
12,100
6,740
Accessories
Crane eye for Platform Beam BR 2,5 t
50
L
115
50
50
U 100
U 120
U 140
U 160
Bridge- and
Tunnel Formwork
=
=
Working Platforms
Climbing Systems
SW 14
273
54
123
Complete with
1 pc. 781053 Nut ISO 7042 M20-8, galv.
Note
Spacing maximum 700 mm.
Number required depends on length of platform
beam. Wrench size SW 30.
52
Slab Formwork
Technical Data
Ø60
15
100
0,561
020600
6,740
75
Accessories
For supporting Platform Beam BR in wall box-outs.
2 pieces per platform beam.
Complete with
1 pc. 781053 Nut ISO 7042 M20-8, galv.
Note
Wrench size SW 30.
Technical Data
130
237
Working Platforms
020620
Shoring Systems
Crane Eye BR 2,5 t
As attachment point for moving climbing systems
or Platform Beam BR.
245
2,210
135
105401
Column Formwork
M 20x90
SW 30
Formwork Girders
For Platform Beam BR.
65
48
70
SW 30
75
Climbing Systems
Item no. Weight kg
020620
0,561
Wall Formwork
125
437
Bridge- and
Tunnel Formwork
52
1,610
Accessories
Bearing Box BR
439
Service
108162
45
80
M 20x90
Item no. Weight kg
108162
1,610
Bearing Box BR
For creating wall box-outs for mounting with the
gravity pivot plate.
70
0,331
020330
12,100
For supporting Platform Beam BR with M24
anchor system. 2 pieces per platform beam.
Technical Data
Permissible load 25.0 kN.
258
162
234
50
291
026430
0,334
024070
0,460
Working Platforms
Climbing Systems
Shoring Systems
140
25
Accessories
Bolt ISO 4014 M24 x 70-10.9, galv.
Note
Non Weldable! Take official approval into
consideration!
Technical Data
M 8x70
82
162 (U 120)
024080
Bridge- and
Tunnel Formwork
210
Accessories
152 (U 100)
Service
M 24
170
029270
Slab Formwork
Column Formwork
30 °
Wall Formwork
140
350
Formwork Girders
0,676
M 8x70
172 (U 140)
182 (U 160)
440
82
Item no. Weight kg
1,550
0,000
0,420
Tie Rods B 15
Tie Rod B 15 l = 0.30 m
Note
Technical Data
Wall Formwork
030740
030050
030150
Formwork Girders
Column Formwork
B 15
1,560
Technical Data
117
Slab Formwork
030370
72
Shoring Systems
110
Ø10
0,222
Note
Wrench size SW 30.
Technical Data
Climbing Systems
030070
50
DW 15
026230
1,010
Anchor Sleeve M24
Note
Working Platforms
SW 30
100
120
Bridge- and
Tunnel Formwork
8
12
Ø 31
15
026240
026250
0,026
0,005
DW 20
Accessories
441
Service
68
Formwork Girders
Item no. Weight kg
026240
0,026
39
0,005
Ø 26
Ø 23
27
026430
0,334
Bolt ISO 4014 M24 x 70-10.9, galv.
systems.
Note
Wrench size SW 36.
70
SW 36
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
M24
Service
50
Ø31
026250
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
24
442
Service
443
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
444
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Shoring Systems
Slab Formwork
Column Formwork
450
451
450
451
451
451
447
457
457
Climbing Systems
Steel Deck UDS 32 x 250
Steel Deck UDS 32 x 250 Public
Stringer Frame UZF 150
Waler on Staircase UAS 75
Zyl. Bolt ISO 4762 M12 x 60-8.8, galv.
Working Platforms
100375
106587
100488
107162
106582
106583
115189
104278
104528
Bridge- and
Tunnel Formwork
457
449
449
451
451
451
449
449
453
454
454
453
453
456
456
456
452
452
452
453
454
453
446
452
455
456
455
456
455
456
455
456
456
455
455
456
456
455
455
456
455
456
455
456
450
457
448
448
452
448
448
449
449
450
446
446
447
447
447
446
446
455
450
450
451
450
451
Bolt ISO 4014 M12 x 70-8.8, galv.
Edge Profile UH 100
Edge Profile UH 125
End Guardrail Post UZE 150
End Step UAE 100
End Step UAE 125
Gap Filler UZD 150 x 16
Guardrail Connector, Corner
Guardrail Connector, Straight
Guardrail Filler
Landing Brace UZB 150
Landing Brace UZB 90°
Landing Cover Plate UZD 150/25
Landing Guardrail UZG 150
Landing Link Panel UAB 30
Landing Transom UZL 150
Ledger UH 100
Ledger UH 100
Ledger UH 125
Ledger UH 125
Ledger UH 150
Ledger UH 150
Ledger UH 200
Ledger UH 200
Ledger UH 25
Ledger UH 25
Ledger UH 250
Ledger UH 250
Ledger UH 300
Ledger UH 300
Ledger UH 400
Ledger UH 400
Ledger UH 50
Ledger UH 50
Ledger UH 75
Ledger UH 75
Ledger with Lap UHP 200
Stair Guardrail UAG
Stair Guardrail UAH
Stair Guardrail UZG 250/150
Stair Step UAR 100
Stair Step UAR 125
Stair Stringer UA 250/200
Stair Stringer UZS 250/150
Staircase UAS 64 x 250/200, Alu
Staircase UAS 75 x 150/50 T, Alu
Standard UVR 300 Public
445
Service
720610
114349
114621
108536
107178
108544
109208
114180
107981
107986
107977
108010
108011
108387
108218
108214
108000
108172
108179
108034
108412
108190
101671
108191
114632
101159
114638
110347
114641
100021
114645
100023
104780
114613
114648
100025
100027
114651
114654
100029
114595
104779
114629
100017
106626
710381
100742
100830
108189
109198
114179
114731
109219
107448
100737
100738
111103
111087
111095
111117
111124
107930
100486
100355
106585
100373
106586
Wall Formwork
PERI UP Stairs
Item no. Weight kg
100737
100738
25,300
29,600
Staircases UAS 64
Assembly on Decking Transom UHD together with
Steel Deck UDS.
Technical Data
Permissible load 2.0 kN/m2.
Wall Formwork
Formwork Girders
PERI UP Stairs
2000
Column Formwork
350 / 600
Shoring Systems
Slab Formwork
2500 / 3000
101671
1,980
For closing gaps on alternating Staircase Units
UAS 64.
290
111117
111124
28,100
33,100
Staircases UAS 75
Assembly on Ledger UH together with Industrial
Deck UDI.
Technical Data
350 / 600
Service
2000
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
400
2500 / 3000
446
Formwork Girders
PERI UP Stairs
Item no. Weight kg
111087
17,600
Deck UDI.
Technical Data
500
Wall Formwork
750
Column Formwork
1500
Deck UDI.
Technical Data
Slab Formwork
17,600
500
210
17,900
Deck UDI.
Technical Data
Climbing Systems
111103
Shoring Systems
1500
Working Platforms
1000
590
Mounted on the treads of the staircase. Allows
installation of Industrial Decks Steel UDI.
698
3,080
95
115189
Bridge- and
Tunnel Formwork
1500
217
447
Service
111095
Item no. Weight kg
100742
10,000
Stair Guardrail UAG
Suitable for Staircase UAS 64 x 250/200, UAS
64 x 300/200, UAS 75 x 250/200 and UAS 75 x
300/200 as internal and external guardrails.
Wall Formwork
Formwork Girders
PERI UP Stairs
1294
100830
4,960
Stair Guardrail UAH
For fixing to the stringers of the Staircase Units
UAS 64 x 250/200, UAS 63 x 300/200,
UAS 75 x 250/200, UAS 75 x 300/200.
519
976
109198
114179
Stair Steps UAR
Stair Step UAR 100
Stair Step UAR 125
Tread for Stair Stringer UA. Non-slip due to perforated surface.
Technical Data
1000 / 1250
1044 / 1294
293
Service
7,390
9,250
82
252
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
2390
Column Formwork
28
8
448
Formwork Girders
PERI UP Stairs
Item no. Weight kg
End Steps UAE
End Step UAE 100
End Step UAE 125
Last step for the Stair Stringer UA. Secures all
steps.
Technical Data
Wall Formwork
5,610
6,590
200
109208
114180
940 / 1190
Column Formwork
57
1000 / 1250
Edge Profiles UH
Edge Profile UH 100
Edge Profile UH 125
Assembly on UH Ledger for anti-slip protection on
the first step at start of stairs with Stair Stringer
UA.
Slab Formwork
0,770
0,997
850 / 1100
39
48
114349
114621
Shoring Systems
1000 / 1250
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Technical Data
1948 / 947
2453 / 1203
2500 / 1250
449
Service
Stair Stringers UA
1500 / 500
15,300
9,350
200 200
109219
114731
Item no. Weight kg
107448
42,800
Wall Formwork
Formwork Girders
PERI UP Stairs
Note
Accessories:
Steel Deck UDS (8x),
Steel Deck UDS Public (1x).
Technical Data
Perm. Load:
1.5 m step width: 7.5 kN/m2
2.5 m step width: 5.0 kN/m2
(with steps left and right of the stringers)
Shoring Systems
Slab Formwork
1025
167 167
1445
340
Column Formwork
2500
106626
6,550
106626
6,550
Accessories
Mounted on Stair Stringer UZS.
2000
Working Platforms
Climbing Systems
60
1932
30
Ø22
100488
100486
100355
100373
100375
5,200
7,060
11,200
14,100
17,000
Steel
Steel
Steel
Steel
Steel
Steel
Decks UDS
Deck UDS 32
Deck UDS 32
Deck UDS 32
Deck UDS 32
Deck UDS 32
x
x
x
x
x
72
104
150
200
250
X
720
1040
1500
2000
2500
perm. p [kN/m²]
6,0
6,0
6,0
6,0
6,0
Service
320
Bridge- and
Tunnel Formwork
71
X
102605
450
0,420
Accessories
Deck Link Plate UED
Formwork Girders
PERI UP Stairs
Item no. Weight kg
15,800
20,600
25,200
Steel Decks UDS Public
As uppermost decking on the Stringer UZS.
Provides a closed set of stairs if used on all steps.
X
1500
2000
2500
Wall Formwork
106585
106586
106587
Stringer Frames UZF
Fitted to Stringer UZS for mounting of Guardrail
Frame UZG.
L
1570
2070
2570
X
1500
2000
2500
Y
1458
1958
2458
Shoring Systems
20,300
24,300
28,300
Climbing Systems
348
L
X
234
Y
108536
107178
108544
16,300
20,300
24,300
Accessories
Bolt ISO 4014 M12 x 70-8.8, galv.
End Guardrail Posts UZE
For 2-, 4- and 6-bay flights of stairs in connection
with Stringer Frame UZF.
L
1535
2035
2535
X
1500
2000
2500
Working Platforms
0,017
0,075
Y
1508
2008
2508
Bridge- and
Tunnel Formwork
710381
720610
348
L
X
234
Y
710381
720610
0,017
0,075
Accessories
Bolt ISO 4014 M12 x 70-8.8, galv.
451
Service
107162
106582
106583
Slab Formwork
320
Column Formwork
164
X
Formwork Girders
PERI UP Stairs
Item no. Weight kg
108189
49,000
1145
Wall Formwork
2500
Shoring Systems
Slab Formwork
Column Formwork
100
489
710381
104528
0,017
0,089
108191
16,400
1389
553
Accessories
For the installation of landing guardrails and dekking.
240
108000
108172
108179
13,700
18,200
22,700
Landing Brace UZB
Required for installation of landing transoms over
corners.
835
L
1447
1947
2447
332,5
X
1500
2000
2500
X
L
30
241
Service
80
103
332,5
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
1500
452
Formwork Girders
PERI UP Stairs
Wall Formwork
Required for installation of landing transoms over
corners.
263
180
1099
Shoring Systems
60
1440
Climbing Systems
34,600
1279
108190
Slab Formwork
30
Column Formwork
315
1500
L
1472
1972
2472
Working Platforms
Gap Fillers UZD
For use with all landings.
X
1500
2000
2500
Bridge- and
Tunnel Formwork
11,200
15,000
18,800
L
107981
108010
108011
Accessories
165
0,067
X
50
104278
453
Service
Item no. Weight kg
108034
2,990
Formwork Girders
PERI UP Stairs
Item no. Weight kg
107986
13,300
Only for corner landings.
310
Wall Formwork
1472
Column Formwork
50
1500
14,700
Only with flights of stairs which are directly
attached to a corner landing.
Slab Formwork
107977
368
1471
50
Shoring Systems
1500
Climbing Systems
108412
9,770
For closing gaps between flights of stairs at intervals of 25 cm.
Working Platforms
350
1436
Service
Bridge- and
Tunnel Formwork
28
1500
454
Formwork Girders
PERI UP Stairs
Wall Formwork
Column Formwork
3000
500
500
500
120
Used for scaffold extensions between guardrails.
160
Item no. Weight kg
107930
13,600
160
Slab Formwork
1380
Ø 48,3
X
250
500
750
1000
1250
1500
2000
2500
Sticker
White
White
Climbing Systems
L
204
454
704
954
1204
1454
1954
2454
White
Red
Working Platforms
Note
X
L
125
Bridge- and
Tunnel Formwork
Ø22
125
455
Service
Ledger UH 25
Ledger UH 50
Ledger UH 75
Ledger UH 100
Ledger UH 125
Ledger UH 150
Ledger UH 200
Ledger UH 250
Ledger UH 300
Ledger UH 400
60
1,440
2,080
2,760
4,490
5,450
4,730
6,060
7,380
8,700
11,400
30
114613
114595
114629
114632
114638
114641
114645
114648
114651
114654
Shoring Systems
Ø11
104780
104779
100017
101159
110347
100021
100023
100025
100027
100029
1,390
2,040
2,710
3,370
4,020
4,690
6,020
7,340
8,670
11,300
Ledger UH 25
Ledger UH 50
Ledger UH 75
Ledger UH 100
Ledger UH 125
Ledger UH 150
Ledger UH 200
Ledger UH 250
Ledger UH 300
Ledger UH 400
X
L
Slab Formwork
Ø22
125
30
125
108218
1,330
For connecting guardrails and mounting of guardrail filler.
53
108214
0,132
108387
0,701
Connects landing guardrails across corners.
Bridge- and
Tunnel Formwork
52
147
108214
0,132
Guardrail Filler
Closes gap between guardrails. Mounted with
guardrail connector straight.
135
55
58
108218
Service
20
224
Accessories
Guardrail Filler
Working Platforms
Climbing Systems
74
Shoring Systems
L
X
Sticker
204
250
454
500
704
750
White
954
1000
White
1204
1250
1454
1500
1954
2000
White
2454
2500
Red
2954
3000
Black
3954
4000
Note
60
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
PERI UP Stairs
456
1,330
Accessories
20
Formwork Girders
PERI UP Stairs
Item no. Weight kg
104278
0,067
Note
Wrench size SW 10.
60
M 12
0,089
Wall Formwork
Note
Wrench size SW 10.
Column Formwork
104528
SW 10
90
M 12
0,017
Self-locking.
Slab Formwork
710381
SW 10
Note
Wrench size SW 18.
M 12
Climbing Systems
Note
Wrench size SW 18.
70
SW 18
Working Platforms
M12
Bridge- and
Tunnel Formwork
Bolt ISO 4014 M12 x 70-8.8, galv.
0,075
457
Service
720610
Shoring Systems
SW 18
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
104305
100411
100242
100159
100870
100244
100014
101591
101588
114811
114825
114812
100401
100583
100149
100235
100711
100224
100581
100580
102605
101394
101378
101379
101381
101360
101372
101373
101375
101576
100039
100076
100079
100082
100085
100031
101799
104618
100349
101579
100444
104412
100265
100266
100267
100268
100810
100863
100042
107815
100047
106931
104356
100049
100051
123483
102617
100053
103607
100055
102846
100057
107867
100059
102862
100061
104391
458
Adj. Base Plate UJS 38-80/50 Swivel
Base Beam UVA 250
Base Plate UJP
Board Transom UHL 104
Access Deck UAL 64 x 200/3
Bracket Brace UCP 72/104
Connection Protect Panel UPC
Console Bracket UCB 104
Coupler Transom UHC 104
Deck Link Plate UED
Decking Gap Filler UD 11/150
Decking Transom Spigot UES
Decking Transom UHD 104
End Guardrail in Advance UPA 104
End Guardrail UPX 104
Guardrail Coupler UPW
Guardrail UPG 150
Guardrail UPG 200
Guardrail UPG 250
Guardrail UPG 300
Guardrail UPG 400
Handle Lock UJS
Ladder UEL w. Hook
460
460
460
460
475
461
461
468
468
467
467
467
472
473
471
471
470
471
474
474
467
468
468
468
468
468
468
468
468
475
463
463
463
463
463
463
470
470
470
470
470
474
475
475
475
475
475
461
466
466
466
466
466
466
466
466
466
466
468
465
465
465
465
465
465
465
465
100063
102861
100065
100067
104766
100069
104762
101731
114635
100192
114641
100021
114645
100023
114648
100025
100027
114651
100029
114124
100440
111053
112926
100977
100840
112765
100981
100973
100572
100985
106630
100573
100989
106624
100574
100993
100575
100969
106965
100322
100518
100516
100503
100514
101306
102860
100009
100012
100013
102859
100486
100355
100373
100375
100377
100820
100488
110076
110160
110176
110208
110211
110526
108068
108114
108117
108120
Ledger Bracket UHA
Ledger UH 104
Ledger UH 104
Ledger UH 150
Ledger UH 150
Ledger UH 200
Ledger UH 200
Ledger UH 250
Ledger UH 250
Ledger UH 300
Ledger UH 300
Ledger UH 400
Ledger UH 72
Ledger UH 72
Locking Pin Ø 48
Node Brace UBK 100/200
Pavement Gantry UVG 104/240
Protection Panel UPP 150 x 100
Standard UVR 100
Standard UVR 150
Standard UVR 200
Standard UVR 300
Standard UVR 400
Standard UVR 50
Toeboard Steel UPY 104
Toeboard Wood UPT-2 150
465
465
465
465
465
465
465
476
463
464
463
464
463
464
463
464
464
463
464
463
464
462
466
466
466
466
466
466
466
466
466
466
466
466
466
466
466
466
472
473
474
474
474
474
461
461
461
461
461
461
467
467
467
467
467
467
467
469
469
469
469
469
469
469
469
469
469
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
469
462
462
462
462
462
Top Standard UVH 50
459
Service
108204
100000
100003
100005
100007
101309
Formwork Girders
Item no. Weight kg
104305
2,450
With captive white quick jack nut.
150
Wall Formwork
30
100863
1,030
100411
3,330
min 45
max 225
275
Ø10
Ø17
Accessories
Handle Lock UJS
With captive red quick jack nut.
Slab Formwork
150
100
505
Ø10
Ø17
Shoring Systems
30
38
min 45 max 355
Column Formwork
100
38
4,520
Climbing Systems
100242
38
805
100
min 45
30
Ø10
Ø17
100159
4,860
38
823
150
100
Ø10
min 45
30
max 613
Bridge- and
Tunnel Formwork
Working Platforms
max 595
150
Service
Ø17
460
Formwork Girders
Item no. Weight kg
100244
1,230
Base Plate UJP
Without height adjustment.
31,8
1,030
Handle Lock UJS
Secures the Adjustable Base Plate in the Standard
when moving.
Wall Formwork
150
100
Ø17
Note
Wrench size SW 19.
Column Formwork
100863
Ø10
130
105
Ø13
138
Slab Formwork
2,470
For assembly directly on the base spindle.
160
160
Bridge- and
Tunnel Formwork
120
Ø13
Working Platforms
Climbing Systems
L
500
1000
1500
2000
3000
4000
N x 500
Ø 48,3
160
Ø11
461
Service
Standards UVR
Standard UVR 50
Standard UVR 100
Standard UVR 150
Standard UVR 200
Standard UVR 300
Standard UVR 400
L
3,080
5,380
7,690
9,990
14,700
19,200
380
102859
101306
102860
100009
100012
100013
Shoring Systems
Ø11
470
Ø 48,3
120 120
230
100014
70
67
SW 19
101309
100000
100003
100005
100007
2,510
4,610
6,920
9,230
11,500
Top Standards UVH
Top Standard UVH 50
Without pins for supporting head spindles.
L
500
1000
1500
2000
2500
Ø11
Slab Formwork
L
N x 500
120
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
Shoring Systems
380
160
Ø 48,3
Ø11
0,059
Locking Pin Ø 48
Ø10
Service
Bridge- and
Tunnel Formwork
Working Platforms
49
462
68
Climbing Systems
111053
25
4,220
5,770
8,260
11,600
13,900
16,300
Decking Transoms UHD
For attaching the Steel Decks UDS.
L
X
675
720
995
1040
1455
1500
1955
2000
2455
2500
2955
3000
Note
Consider load-bearing capacity in connection with
decking length.
Technical Data
With hook for bracket support.
X
L
Slab Formwork
80
80
Formwork Girders
100031
100039
100076
100079
100082
100085
Wall Formwork
Item no. Weight kg
Column Formwork
Shoring Systems
X
720
1040
1500
2000
2500
Sticker
White
Red
Climbing Systems
L
674
994
1454
1954
2454
Note
Longitudinally-stamped with coloured laber for
Ø22
Working Platforms
X
L
125
125
Bridge- and
Tunnel Formwork
Ledger UH 72
Ledger UH 104
Ledger UH 150
Ledger UH 200
Ledger UH 250
Ledger UH 300
Ledger UH 400
2,670
3,510
4,730
6,060
7,380
8,700
11,400
463
Service
114124
114635
114641
114645
114648
114651
114654
Accessories
60
7,620
30
100401
100440
100192
100021
100023
100025
100027
100029
2,630
3,480
4,690
6,020
7,340
8,670
11,300
Ledger UH 72
Ledger UH 104
Ledger UH 150
Ledger UH 200
Ledger UH 250
Ledger UH 300
Ledger UH 400
L
X
Sticker
674
720
994
1040
1454
1500
1954
2000
White
2454
2500
Red
2954
3000
Black
3954
4000
Note
X
L
Ø22
60
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
125
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
30
125
464
Formwork Girders
Wall Formwork
L
X
Y
Sticker
1347
1500
500
1601
1500
1000
1953
1500
1500
2358
1500
2000
1820
2000
500
2016
2000
1000
2305
2000
1500
2462
2500
1000
2658
2000
2000
White
2705
2500
1500
3010
2500
2000
Red
2795
3000
500
2926
3000
1000
3133
3000
1500
3400
3000
2000
Black
Note
With stamped length and coloured label for easier
identification.
UBL 100/100 identical to Diagonal Strut ST 100
(Art.no. 019940).
25
25
L
Shoring Systems
L
Climbing Systems
Ø42,4
25
Bridge- and
Tunnel Formwork
Working Platforms
X
Ledger Braces UBL
Attach using holes in the ledger.
465
Service
3,800
4,450
5,350
6,390
5,010
5,510
6,250
6,650
7,160
7,270
8,050
7,500
7,840
8,370
9,050
Y
107867
100055
102846
100057
104391
100059
102862
100063
100061
102861
100065
104762
100067
104766
100069
Column Formwork
Item no. Weight kg
Slab Formwork
Formwork Girders
Wall Formwork
Item no. Weight kg
100969
100977
100840
112926
112765
100981
100973
100572
100985
106630
100573
100989
106624
100574
100993
100575
6,750
4,850
7,030
6,990
7,260
5,710
6,580
7,600
6,790
7,510
8,390
7,940
8,540
9,310
9,130
10,300
Node Braces UBK
For hooking into the small hole of the rosette.
L
2179
1472
2301
2285
2401
1821
2152
2539
2246
2521
2860
2696
2930
3226
3131
3625
X
720
1040
1040
1000
1250
1500
1500
1500
2000
2000
2000
2500
2500
2500
3000
3000
Slab Formwork
Column Formwork
Y
2000
1000
2000
2000
2000
1000
1500
2000
1000
1500
2000
1000
1500
2000
1000
2000
Sticker
White
Red
Black
47
Shoring Systems
Y
L
Ø42,4
47
100042
107815
100047
106931
104356
100049
100051
123483
102617
100053
7,350
8,700
9,870
10,200
11,300
12,400
11,800
12,700
13,800
15,000
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Horizontal
Braces UBH
Brace UBH 150/150
Brace UBH 200/150
Brace UBH 200/200
Brace UBH 250/150
Brace UBH 250/200
Brace UBH 250/250
Brace UBH 300/150
Brace UBH 300/200
Brace UBH 300/250
Brace UBH 300/300
L
2042
2422
2749
2839
3123
3456
3279
3528
3826
4164
X
1500
2000
2000
2500
2500
2500
3000
3000
3000
3000
Y
1500
1500
2000
1500
2000
2500
1500
2000
2500
3000
7
L
10
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
X
Y
L
10
Ø48,3
Service
X
466
Formwork Girders
Item no. Weight kg
5,200
7,060
11,200
14,100
17,000
19,900
25,900
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Decks UDS
Deck UDS 32
Deck UDS 32
Deck UDS 32
Deck UDS 32
Deck UDS 32
Deck UDS 32
Deck UDS 32
x
x
x
x
x
x
x
72
104
150
200
250
300
400
X
720
1040
1500
2000
2500
3000
4000
perm. p [kN/m²]
6,0
6,0
6,0
6,0
6,0
4,5
2,0
Wall Formwork
100488
100486
100355
100373
100375
100377
100820
320
71
Column Formwork
X
0,420
Slab Formwork
102605
Accessories
Deck Link Plate UED
Deck Link Plate UED
For linking adjacent UDS decks.
Ø20
160
Technical Data
Load Class 3, 2.0 kN/m2.
Access Decks UAL with ladder
Technical Data
Load Class 3, 2.0 kN/m2.
2500 / 3000
74
25,300
28,600
640
114825
114812
Bridge- and
Tunnel Formwork
640
2000
Climbing Systems
Working Platforms
18,200
77
74
114811
Shoring Systems
71
Ø8
467
0,420
Service
102605
Item no. Weight kg
103607
3,450
Ladder UEL w. Hook
For attaching to Access Deck UAL without ladder
or Access Deck UAL with ladder.
350
Wall Formwork
Formwork Girders
213
6 x 280 = 1680
101360
101372
101373
101375
101394
101378
101379
101381
2,160
2,780
3,400
4,020
2,800
3,620
4,440
5,260
Decking Gap Fillers UD
For covering gaps between 7 cm and 25 cm.
L
1486
1986
2486
2986
1486
1986
2486
2986
X
1500
2000
2500
3000
1500
2000
2500
3000
Shoring Systems
Slab Formwork
Column Formwork
2142
X
L
50
101588
101591
2,300
3,160
Board Transom UHL
Provides additional support for scaffold boards.
Mounted on the Ledger UH.
761 / 1081
720 / 1040
40
Service
30
Bridge- and
Tunnel Formwork
80
60
Working Platforms
Climbing Systems
70 / 110
468
Formwork Girders
Item no. Weight kg
L
1536
2036
2536
3036
4036
X
1500
2000
2500
3000
4000
Wall Formwork
Toeboards Wood UPT-2
X
L
Shoring Systems
X
720
1040
1500
2000
2500
3000
66
Working Platforms
L
706
1016
1486
1986
2486
2986
Bridge- and
Tunnel Formwork
Toeboards Steel UPY
1,380
2,040
3,000
4,030
5,060
6,100
163
110526
110076
110160
110176
110208
110211
Slab Formwork
150
Column Formwork
L
X
Climbing Systems
4,090
5,160
6,230
7,300
9,430
469
Service
108068
108114
108117
108120
108204
Item no. Weight kg
101579
100444
100349
3,910
7,150
9,420
End
End
End
End
Guardrails UPX
Guardrail UPX 32
Guardrail UPX 72
Guardrail UPX 104
Note
With integrated toeboard.
1019
45
27
Column Formwork
1015
Wall Formwork
Formwork Girders
215
570 / 890
720 / 1040
104618
101799
10,000
12,000
End Guardrails in Advance UPA
Note
With integrated toeboard.
520 / 840
3,860
For fitting at joints of PERI UP Rosett.
377
185
80
470
0,110
1,020
Accessories
Locking Bolt Ø 48/57
Spigot ULT 32
336
100711
100478
100301
Service
144
720 / 1040
Bridge- and
Tunnel Formwork
Working Platforms
1050
Climbing Systems
Shoring Systems
Slab Formwork
100
246
Formwork Girders
523
Wall Formwork
185
Item no. Weight kg
100235
5,010
With connection for Bracket Support UCP.
Slab Formwork
8,860
Shoring Systems
695
195
720
Climbing Systems
With connection for Bracket Support UCP.
180
1049
Bridge- and
Tunnel Formwork
1040
13,200
195
100149
Working Platforms
100224
Accessories
Spigot ULT 32
471
Service
0,110
1,020
180
100478
100301
Column Formwork
320
Item no. Weight kg
100401
7,620
For increasing the load-bearing capacity of
UCB 104 and UCB 72 brackets, and UHD decking
transoms.
Column Formwork
Wall Formwork
Formwork Girders
Shoring Systems
Slab Formwork
Ø48,3
720
1040
106965
39,300
Completely roofed over with UDS Decks.
1040
Climbing Systems
320
160
180
Ø38
112
Bridge- and
Tunnel Formwork
380
500
2400
Working Platforms
1120
Ø48,3
Service
720
472
Formwork Girders
Item no. Weight kg
100322
46,100
Completely roofed over with UDS Decks.
160
720
Wall Formwork
1760
1040
Column Formwork
Slab Formwork
Climbing Systems
Fixes two UDS decks in a vertical position.
Working Platforms
Ø48,3
104
80
Bridge- and
Tunnel Formwork
4,740
100583
Accessories
Spigot ULT 32
473
Service
0,110
1,020
659
100478
100301
Shoring Systems
112
380
500
2400
1120
Ø48,3
Item no. Weight kg
100518
100516
100503
100514
13,700
16,800
20,100
23,300
Protection
Protection
Protection
Protection
Protection
Panels UPP
Panel UPP 150 x 100
Panel UPP 200 x 100
Panel UPP 250 x 100
Panel UPP 300 x 100
Wall Formwork
Formwork Girders
L
X
1610
1500
2110
2000
2610
2500
3110
3000
Note
Can be extended as required.
X
L
100580
100581
4,780
6,330
Coupler Transom
Coupler Transom
Coupler Transom
For decking levels
UHC
UHC 72
UHC 104
at any height.
Working Platforms
Climbing Systems
108
Shoring Systems
Slab Formwork
1050
100
Column Formwork
100
80
720 / 1040
104412
0,719
For mounting the Guardrail UPG on the rosette.
Note
Assembly with guardrail in advance.
Service
60
177
Bridge- and
Tunnel Formwork
83
474
Formwork Girders
Item no. Weight kg
Wall Formwork
L
X
Sticker
1546
1500
2046
2000
White
2546
2500
Red
3046
3000
Black
4046
4000
Note
With stamped length and coloured sticker for
Ø38
2,680
For connecting vertical components to the
Decking Transom.
Note
Take permissible load of the decking transom into
consideration.
Shoring Systems
101576
Ø13
210
Working Platforms
Base Beam UVA 250
For free-standing and mobile scaffold units. For
symetric and antimetric assembly of
UP T 72/T 104 and Rosett 72, 75, 100, 104 and
symetric assembly of Rosett b = 75, 100, 150, 200
and 250 cm.
2660
1040
1040
1000
1000
750
750
720
720
Ø14
390
40,700
97
720
750
1000
1040
1500
2000
2500
160
100870
Climbing Systems
330
Ø38
Slab Formwork
Column Formwork
L
X
475
Bridge- and
Tunnel Formwork
Guardrails UPG
Guardrail UPG 150
Guardrail UPG 200
Guardrail UPG 250
Guardrail UPG 300
Guardrail UPG 400
2,410
3,220
4,020
4,820
9,070
Service
100265
100266
100267
100268
100810
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Formwork Girders
Item no. Weight kg
101731
0,841
476
133
62
Wall Formwork
Ledger Bracket UHA
For connecting ledger to ledger at right-angles.
30
83
Service
477
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
478
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Shoring Systems
487
487
482
488
481
488
481
481
481
486
486
486
482
482
480
480
480
480
480
480
480
480
480
Climbing Systems
Softwood Timber DIN 4074-1, S7/MS7
Softwood Timber DIN 4074-1, Ü-Marking
Spacer UEC 10
Spigot ULT 32
Starter Tube ULB 50/70
T-Head Bolt M14 x 63/75, galv.
Tension Coupler Ø 48,3 mm
Tube Connector Ø 48,3 mm
Wall Insert UFI 14/100
Wall Tie UWT 110
Wall Tie UWT 140
Wall Tie UWT 170
Wall Tie UWT 220
Wall Tie UWT 270
Wall Tie UWT 45
Working Platforms
070710
070713
100750
100301
017020
100529
102400
017010
017000
710293
710702
710290
100908
100909
100697
100698
100696
100091
100093
102951
102954
102957
100088
Bridge- and
Tunnel Formwork
490
488
489
483
483
483
483
483
485
485
480
486
486
486
486
481
486
483
483
484
484
483
490
487
487
487
487
487
487
487
487
487
487
485
482
482
486
485
484
484
484
490
490
490
490
490
490
490
490
490
489
487
487
480
480
480
486
480
480
480
480
480
480
480
481
487
487
Board Retainer UPD 60
Castor UEW 12 with Spigot
Castor UEW 12 with Spindle
Coupler Brace UBC 150/200
Coupler Brace UBC 72-104/200
Crate Pallet 80 x 120, galv.
Crate Pallet 80 x 120, painted
Debris Net 2,5 x 10,0 m
Double Coupler NK 60/48, galv.
Flanged Nut M14 - SW 19, yellow
Frame Pallet USP 72, galv.
Hardware Box 80 x 120, galv.
Hardware Box 80 x 120, painted
Hook for Scaffold Components
Latt. Girder Alu ULA 50/425 HD
Latt. Girder Steel ULS 50/425
Lid for Wire Crate Pallet 80 x 120, painted
Locking Pin Ø 48
Netting Tie
Pallet RP 110 x 125, painted
PERI UP Assembly Certificate, CDN
PERI UP Assembly Certificate, CZ
PERI UP Assembly Certificate, D
PERI UP Assembly Certificate, ES
PERI UP Assembly Certificate, EX
PERI UP Assembly Certificate, F
PERI UP Assembly Certificate, PL
PERI UP Assembly Certificate, PT
PERI UP Assembly Certificate, TR
PERI UP Scaffold Tag
Plastic Sheeting UT 2.70 x 20.0 m
Ring Bolt UFE 12/120
Ring Bolt UFE 12/90
479
Service
101596
101858
101860
100416
100419
100422
100425
100428
065068
065016
026417
101347
101348
101349
101350
017030
710340
100660
100678
025660
025670
100719
100452
101656
101657
101658
101659
100330
100336
100339
100185
100183
100852
065067
100478
111053
100871
061510
106939
103434
103429
113835
113839
113833
113836
113834
113829
113838
113837
115739
113832
102021
102023
100694
100695
100693
026530
026411
026412
026413
026414
026419
026418
026415
017040
070711
070712
Slab Formwork
Formwork Girders
Wall Formwork
Item no. Weight kg
100088
100091
100093
102951
102954
102957
1,920
4,680
5,870
7,060
9,050
11,000
Wall Ties UWT
Wall Tie UWT 45
Wall Tie UWT 110
Wall Tie UWT 140
Wall Tie UWT 170
Wall Tie UWT 220
Wall Tie UWT 270
L
488
1138
1438
1738
2238
2738
Ø48,3
20
Column Formwork
Slab Formwork
0,169
0,190
0,250
100696
100697
100698
0,007
0,009
0,010
026415
026417
026411
026412
026413
026414
026419
026418
3,550
0,000
3,550
7,100
10,650
14,200
17,750
21,600
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
100693
100694
100695
Service
18
L
Ring Bolts UFE
Ring Bolt UFE 12/90
For assembling the Wall Tie UWT. Expansion bolt
UFI 14 required.
Wall
Wall
Wall
Wall
Safety Instructions
With marking for screw-in depth.
Inserts UFI
Insert UFI 14/70
Insert UFI 14/100
Insert UFI 14/135
L
m
m
m
m
m
m
1000
2000
3000
4000
5000
6000
L
Ø48,3x3,2
480
85
Formwork Girders
Note
Wrench size SW 19.
Wall Formwork
(9)
Item no. Weight kg
017020
1,120
SW 19
For Scaffold Tubes Ø 48 mm and Ø 60 mm.
Note
Wrench size SW 19.
Column Formwork
1,400
( 9)
017030
Note
Wrench size SW 19.
Shoring Systems
SW 19
Note
Wrench size SW 19.
Climbing Systems
1,400
Working Platforms
(27)
017010
SW 19
1,540
Note
Wrench size SW 19.
Bridge- and
Tunnel Formwork
(26)
017000
0,850
Note
SW 30
( 12)
017040
SW 19
SW 19
481
Service
1,100
(27)
102400
Slab Formwork
SW 19
Item no. Weight kg
100908
1,400
For tensile-proof connections of scaffold tubes
Ø 48 mm.
.
1,000
100909
1,000
Accessories
Tensile-proof connection of scaffold tubes
Ø 48 mm.
Ø38
87
Ø37
197
100908
1,400
100750
1,310
Climbing Systems
Shoring Systems
87
Ø48
100909
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Accessories
Spacer UEC 10
For connecting Standards Ø 48 mm to external
and internal corners.
Note
Wrench size SW 19.
100
148
0,110
Note
Not for suspended scaffold. Not for coupling of
lattice girders.
48
100478
78
111053
0,059
44
Locking Pin Ø 48
Ø10
49
Service
Ø9
482
68
Bridge- and
Tunnel Formwork
Working Platforms
SW 19
25
Formwork Girders
Item no. Weight kg
100719
0,060
As tension-proof connection of standards for suspended scaffold or lattice girders.
Note
Wrench Size SW 16.
Wall Formwork
70
SW 16
M10
X
720/1040
1500
2000
2500
3000
Y
2000
2000
2000
2000
2000
Column Formwork
L
1828
2305
2657
3052
3473
Slab Formwork
Coupler Braces UBC
For special applications.
For connecting to scaffold tube Ø 48 mm.
Y
L
Shoring Systems
8,040
9,740
11,000
12,400
13,900
25
100428
100416
100419
100422
100425
Complete with
1 pc. 100707 Lashing 25 x 5750 mm
6 pc. 100706 Tube l = 1.0 m
Note
36 T-Frame UVT with Spigot Tube UV 165 or Base
Frame UVF with L-Frame UVL.
Safety Instructions
1020 / 1340
775
Frame Pallets USP, galv.
For stacking and transportation of PERI UP scaffold components.
1085 / 1405
832
483
Service
60,400
65,600
590
100660
100678
Working Platforms
X
Bridge- and
Tunnel Formwork
25
Climbing Systems
Ø48,3
Item no. Weight kg
Pallets RP-2, galv.
880
1080 / 1380
680
100
Column Formwork
1280 / 1580
1200 / 1500
106939
20,100
For stacking and transportation of formwork and
scaffold components.
800
Safety Instructions
973
563
408
1143
Shoring Systems
025660
025670
64,300
64,300
Hardware Boxes 80 x 120
1160
Technical Data
Capacity approx. 0.28 m³.
Safety Instructions
1240
835
Service
Bridge- and
Tunnel Formwork
500
Working Platforms
Climbing Systems
1330
484
100
Slab Formwork
Safety Instructions
600
33,400
40,200
850
103434
103429
Wall Formwork
Formwork Girders
Formwork Girders
Item no. Weight kg
Crate Pallets 80 x 120
Technical Data
Safety Instructions
835
Slab Formwork
For closing crate pallets 80 x 120 or mesh pallets
80 x 120.
Climbing Systems
Technical Data
Safety Instructions
Working Platforms
110,000
.
Bridge- and
Tunnel Formwork
061510
Shoring Systems
37
745
1100
9,310
798
065067
Column Formwork
970
1240
Wall Formwork
86,000
86,100
485
Service
065068
065016
Formwork Girders
Item no. Weight kg
710340
0,032
Substitute nut for scaffold tube couplings etc.
Note
Wrench size SW 19.
Column Formwork
Wall Formwork
M14
SW 19
710293
710702
710290
0,083
0,096
0,115
T-Head
T-Head
T-Head
T-Head
Bolts M14, galv.
Bolt M14 x 63/75, galv.
L
63
75
98
12,5
710340
0,032
026530
2,400
Accessories
Safety netting made of high-strength polypropylene for safety scaffolding. 5 mm thick, knotless.
Technical Data
Mains Type A2 according to DIN EN 1263-1.
Energy consumption 4,2 kJ. Colour: green.
Approved by the Bau-BG (Employers´ Liability
Insurance Association for the building industry).
100
2000
Climbing Systems
Shoring Systems
Slab Formwork
L
100
Service
Bridge- and
Tunnel Formwork
Working Platforms
6000
101347
101348
101349
101350
1,800
3,600
2,160
4,320
100871
0,002
486
Debris
Debris
Debris
Debris
Debris
Nets
Net 2,5
Net 2,5
Net 3,0
Net 3,0
x
x
x
x
10,0 m
20,0 m
10,0 m
20,0 m
Netting Tie
Length 300 mm. Minimum bonding strength
23 KP.
Formwork Girders
Item no. Weight kg
070710
070711
070712
070713
0,000
0,000
0,000
0,000
100330
100336
100339
100185
100183
100852
41,700
50,900
60,200
54,800
64,500
83,600
Plastic Sheetings UT
Wall Formwork
13,500
16,000
Softwood Timbers DIN 4074-1
Column Formwork
102021
102023
Y
500
500
500
700
700
700
Slab Formwork
X
4000
5000
6000
5000
6000
8000
L
X
X
4000
5000
6000
8000
Y
500
500
500
700
Working Platforms
L
4250
5250
6250
8250
L
X
Ø48,3
Bridge- and
Tunnel Formwork
Lattice Girders Alu ULA
To bridge openings. For system-free application.
18,400
22,500
26,500
37,400
Y
101656
101657
101658
101659
Climbing Systems
Y
Ø48,3
Shoring Systems
L
4250
5250
6250
5250
6250
8250
487
Service
Lattice Girders Steel ULS
To bridge openings. For system-free application.
Formwork Girders
Item no. Weight kg
100529
5,260
For Lattice Girder ULS and ULA.
Note
Only use with system-free girder assembly.
300
920
Ø48,3
Column Formwork
760
Wall Formwork
160
128
1,020
Spigot ULT 32
Lose pin for connecting scaffold tubes Ø 48.3 x
3.2 mm, e.g. top standards and lattice girders.
Ø38
320
0,059
0,060
101858
7,000
Accessories
Locking Pin Ø 48
As steerable castor for mobile scaffolds.
Wheel centre red.
Technical Data
Ø 38
261
322
100719
100478
Service
Bridge- and
Tunnel Formwork
Working Platforms
411
Ø16
Ø13
150
111053
100719
Climbing Systems
Shoring Systems
Slab Formwork
100301
488
0,060
0,110
Accessories
110
Formwork Girders
As steerable castor for mobile scaffolds. Wheel
centre red.
Technical Data
Wall Formwork
Item no. Weight kg
101860
7,500
261
Column Formwork
761
500
38
Slab Formwork
Shoring Systems
To cordon off scaffolding areas not yet authorized
for use. With the exception of inserting the PERI
UP Assembly Certificate.
.
Climbing Systems
0,035
Working Platforms
113832
Accessories
Handle Lock UJS
Quick Jack Nut 38, galv.
Bridge- and
Tunnel Formwork
1,030
0,421
100863
710071
110
489
Service
322
Formwork Girders
Item no. Weight kg
113833
113834
113829
113835
113836
113837
113838
113839
115739
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
Column Formwork
Wall Formwork
PERI UP Assembly Certificates, TR
Inserted into the PERI UP document pocket.
Note
Front side:
Assembly report for release of scaffolding.
Rear side:
Test report
Assembly Certificate
Inspection Record
.
Inspection by qualified person only
To be completed by the supervisor
Installation location
Important
Position
Any modifications made to the
scaffold, e.g. removal of anchors,
may only be carried out by the
scaffolder.
Date
Time
Client
Scaffolder
Date
Signature
Signature
Working scaffold according to
EN 12811, for Load Class
2
kN/m
1-2: maintenance work 1,50 kN/m2
3: paint/plaster work 2,00 kN/m2
4-6: brickwork ≥ 2,00 kN/m2
Width Class W
W06 0,6 ≤ w ≤ 0,9m
W09 0,9 ≤ w ≤ 1,2m
W12-W24 w ≥ 1,2m
Handing-Over Certificate
Shoring Systems
Slab Formwork
To be completed by the inspecting person
Name
Signature
Date, Time
Remarks
Scaffold is no longer
authorized for use:
Date:
101596
1,500
© 2007 PERI GmbH All Rights Reserved 113834
For securing planks to prevent lifting and sliding.
693
30
7 x 70 = 490
80
0,500
Service
Bridge- and
Tunnel Formwork
.
490
220
100452
65
Working Platforms
Climbing Systems
Ø5
Service
491
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
492
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
499
497
503
499
499
502
496
495
495
496
496
495
495
495
495
495
495
499
499
500
500
497
497
494
502
501
497
497
497
497
497
497
497
497
503
500
502
501
500
500
501
498
497
498
494
494
494
494
494
494
494
494
494
494
494
494
494
494
494
494
494
498
498
Adjusting Unit VARIOKIT
Angle Connector RCS/SRU
Bolt Ø 21 x 120
Bolt Ø 26 x 120
Climbing Rail Angle Connector RCS
Climbing Rail Connector RCS 33
Climbing Rail RCS 148
Compensation Washer 16, yellow galv
Counterplate RCS DW 20
Eye Nut RCS DW 15
Guardrail Post RCS/SRU 184
Hook Strap Uni HBU 24-26 U200
Lifting Beam RCS 10 t
Platform Beam RCS/SRU 113
Scaffold Tube Adapter RCS Ø 48
Spacer M20-82
Spacer M24-82
Spindle Adapter SKS/RCS
Spindle Adapter SLS/RCS
Spindle Spreader HD
Tie Yoke Head SRU
493
Service
113933
111283
115375
104031
111567
114997
111382
109743
111833
113744
111390
114166
109469
109470
109471
109472
109610
024000
024180
018060
022230
114082
114084
104027
115378
114328
101774
101776
101778
101779
109726
109785
111035
101773
030070
111806
112986
114301
110084
110022
110023
116039
110477
112816
103868
103871
103874
103877
103886
103889
103898
103892
103929
103903
103906
103915
103918
103922
103925
103928
103943
110756
103737
103868
103871
103874
103877
103886
103889
103898
103892
103929
103903
103906
103915
103918
103922
103925
103928
103943
18,100
24,200
30,900
38,100
44,700
52,000
58,600
65,600
72,000
81,000
92,600
106,000
119,000
135,000
146,000
159,000
157,000
Steel Walers Universal SRU
Universal steel waler profile U 120 and U 140 used
as waling for girder wall formwork and for diverse
special applications. With adjustable spacers.
L
722
972
1222
1472
1722
1972
2222
2472
2722
2972
3472
3972
4472
4972
5472
5972
4972
Technical Data
SRU 120 Wy = 121,4 cm³, Iy = 728 cm4
SRU 140 Wy = 172,8 cm³, Iy = 1210 cm4
L
7 x 60
37,5 52,5
Shoring Systems
51
48,5
125
125
198,5
125
X
52
120
Working Platforms
70
52
162
104027
7,610
For assembly on Steel Waler SRU.
172
Complete with
4 pc. 104024 Nut ISO 7040 M16-8, galv.
Technical Data
Wy = 121.4 cm³, Iy = 728 cm4
65
120
53
Bridge- and
Tunnel Formwork
112
19
Climbing Systems
3 x 65
17
36
Service
125
140
Formwork Girders
Wall Formwork
Item no. Weight kg
Slab Formwork
Column Formwork
M 16
494
236
52
162
Formwork Girders
Item no. Weight kg
M 20
M 24
Ø25
80
Working Platforms
For an articulated connection or doubling of the
RCS Climbing Rails.
Ø21
215
Ø26
Bridge- and
Tunnel Formwork
78
12,700
Shoring Systems
Complete with
3 pc. 710894 Bolt Ø 25 x 180, geomet.
403
111833
200
Climbing Systems
For an articulated connection of RCS Climbing
Rails.
Slab Formwork
302,5
82
110
325
6,520
125 125
109743
Column Formwork
Ø26
125
Ø21
L
N x 500
Wall Formwork
L
1480
2480
3480
4980
7480
9980
Technical Data
Wy = 357.6 cm³, Iy = 3576 cm4
495
Service
Climbing Rails RCS
Steel profile for all-purpose use of climbing application or civil constructions. With Spacer
M 20-82 and M 24-82.
232
78,300
130,000
183,000
262,000
394,000
525,000
177,5
114166
109469
109470
109471
109472
109610
250
For rigid (bending moment limited) connection of
Climbing Rail RCS.
125
45 45
785
Item no. Weight kg
113744
22,600
Wall Formwork
Formwork Girders
250
Ø26
80
180
Column Formwork
Ø21
32,800
Slab Formwork
111390
For rigidly connecting the Climbing rail RCS.
Complete with connection for the Heavy-Duty
Spindle SLS.
Ø26
965
110 90
78
300
111382
35,200
For rigidly connecting the Climbing Rail RCS at
right-angles, for supporting frame construction or
as bracket. With connection for the Heavy-Duty
Spindle SLS and Tie Rod Cylinder Yoke SRU.
Ø26
496
719
Bridge- and
Tunnel Formwork
Ø21
625
375
Ø62
62
719
Service
7 x 125 = 875
52
Working Platforms
Climbing Systems
Shoring Systems
6 x 125 = 750
Ø21
78
Formwork Girders
4x62,5=250 125
Wall Formwork
335
250
62,5
52
For right-angled connection of Steel Waler SRU to
the Climbing Rail RCS and for attaching guardrail
posts to Steel Waler SRU.
125
Item no. Weight kg
111283
9,890
64
80
Column Formwork
455
Heavy Duty Spindles SLS
Used as adjustable spindle for truss beams made
of Steel Walers SRU and Climbing Rails RCS.
A
min. L
max. L
344
400
800
746
800
1400
946
1000
1800
1346
1400
2400
1944
2000
3000
2544
2600
3600
3144
3200
4200
3744
3800
4800
Note
Permissible load see PERI Design Tables.
Slab Formwork
12,000
14,300
17,900
24,330
31,800
37,900
44,300
50,500
Ø21
48,3
89
A
Shoring Systems
111035
101773
101774
101776
101778
101779
109726
109785
Ø25 / Ø31,5
Working Platforms
Counterplates RCS
Counterplate with centring for anchoring through
the Climbing Rail RCS.
140
2,860
4,280
80
114082
114084
max L
Climbing Systems
min L
Complete with
1 pc. 104031 Bolt Ø 21 x 120
Ø21
For connecting the Heavy-Duty Spindle SLS to the
Climbing Rail RCS.
Ø26
Ø21
80
497
Service
3,990
160
110477
Bridge- and
Tunnel Formwork
22 / 35
Item no. Weight kg
116039
4,910
For connecting the Compression Spindle SKS to
the Climbing Rail RCS.
Complete with
1 pc. 111567 Bolt Ø 26 x 120
Column Formwork
160
Ø26
Wall Formwork
Formwork Girders
Ø26
Ø 80
112816
12,200
Spindle Spreader HD
For connecting spindles or Climbing Rail RCS
transversely to the Main Beam HDT.
Complete with
2 pc. 710229 Nut ISO 4032 M16-8, galv.
2 pc. 711074 Washer ISO 7089 200 HV, A 16, galv.
2 pc. 112815 Clamping Plate M16 Nova Grip
182
Ø22
110756
7,980
Tie Yoke Head SRU
For mounting in the Steel Waler SRU. Suitable for
Tie Rod DW 15.
163
103737
10,800
48
For a rigid connection of Steel waler SRU and for
connecting Heavy-Duty Spindles SLS.
125
21
685
104031
018060
498
0,462
0,030
Accessories
Bolt Ø 21 x 120
187,5 62,5
48
210
Working Platforms
198
Bridge- and
Tunnel Formwork
180
Complete with
2 pc. 105400 Bolt Ø 20 x 140, galv.
2 pc. 770013 Split Pin ISO 8752 8 x 70, galv.
62,5 187,5
Service
56
400
Climbing Systems
Shoring Systems
Slab Formwork
Ø26
304
50
Formwork Girders
Complete with
3 pc. 104031 Bolt Ø 21 x 120
Note
Wrench size SW 30.
25
621
SW 30
234
Ø22
SW 30
125
250
0,131
0,126
46
250
Compensation Washers, galv.
Compensation Washer 16, yellow galv.
For assembling in the VKZ holes.
Slab Formwork
024000
024180
Wall Formwork
For an articulated connection of Steel Walers SRZ
and SRU. With integrated adjustment feature.
Column Formwork
Item no. Weight kg
113933
17,100
Ø16,5 /
Ø20,5
0,303
0,184
104031
0,462
Accessories
Bolt ISO 4014 M20 x 100-8.8, galv.
Bolt ISO 4014 M16 x 100-8.8, galv.
Bolt Ø 21 x 120
Climbing Systems
024910
710219
6,5
6
Shoring Systems
Ø 58
207
122
Ø6
0,030
111567
0,729
Accessories
Bridge- and
Tunnel Formwork
018060
Working Platforms
Ø21
Bolt Ø 26 x 120
207
122
Ø6
Ø26
0,033
Accessories
499
Service
022230
Formwork Girders
Item no. Weight kg
018060
0,030
022230
0,033
Ø5
111806
0,945
For assembling the GT 24 Girder on the
Climbing Rail RCS.
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Ø4
min 240
max 260
80
138
2,310
Ø48
145
Bridge- and
Tunnel Formwork
110022
0,493
Spacer M20-82
Spacer for Climbing Rails RCS.
78
Complete with
1 pc. 781053 Nut ISO 7042 M20-8, galv.
82
Service
Ø25
27
Complete with
1 pc. 710894 Bolt Ø 25 x 180, geomet.
122
For assembling scaffold tubes Ø 48 mm on
Climbing Rails RCS.
159
110084
Working Platforms
Climbing Systems
232
500
SW 30
Complete with
1 pc. 105032 Nut ISO 7042 M24-8, galv.
Note
Wrench size SW 36.
Wall Formwork
Spacer M24-82
Spacer for Climbing Rails RCS.
34
Item no. Weight kg
110023
0,910
SW 36
Column Formwork
82
Formwork Girders
Ø21
Ø10
125
125
Ø21 M 20
650
215
Complete with
2 pc. 781053 Nut ISO 7042 M20-8, galv.
M 20x100
max
70
45
Working Platforms
Ø21
80
Bridge- and
Tunnel Formwork
M 20
For assembly of the guardrail on the Platform
Beam RCS/SRU.
1840
16,600
14 x 125 = 1750
114328
Accessories
5 x 250 = 1250
16,600
76
114328
50
98
1126
Shoring Systems
Ø21
Slab Formwork
Complete with
2 pc. 104031 Bolt Ø 21 x 120
2 pc. 781053 Nut ISO 7042 M20-8, galv.
Climbing Systems
For assembling cantilvered platforms on Steel
Walers SRU or Climbing Rails RCS.
501
Service
17,100
337
114301
Item no. Weight kg
112986 153,000
For moving RCS climbing units.
Technical Data
Bearing capacity 10 t.
Safety Instructions
Column Formwork
6763
Wall Formwork
Formwork Girders
16 x 125 = 2000
max 5000
Shoring Systems
Slab Formwork
min 2875
1,110
Climbing Systems
115378
64
Ø26,5
DW 15
Working Platforms
107
104031
111567
0,462
0,729
114997
7,160
40
Accessories
Bolt Ø 21 x 120
Bolt Ø 26 x 120
For anchoring the bracing with DW 15 to the
building slab. Fixation with anchor system M24
or corresponding dowels.
Complete with
1 pc. 104031 Bolt Ø 21 x 120
Note
230
Ø25
Ø23
78
130
Ø21x120
Ø32
Service
310
502
200
12
Bridge- and
Tunnel Formwork
Eye Nut RCS DW 15
As an articulated connection to the Climbing Rail
RCS, Steel Waler SRU for bracing with DW 15.
Formwork Girders
Note
Wrench size SW 30.
Technical Data
Wall Formwork
50
SW 30
DW 15
Column Formwork
For tensioning and as an articulated connection to
the Climbing Rail RCS, Steel Waler SRU or Bracing
Shoe RCS for bracing with DW 15.
Ø26,5
125
6,100
110
115375
Ø20
Working Platforms
Climbing Systems
Shoring Systems
Accessories
Bolt Ø 21 x 120
Bolt Ø 26 x 120
Bridge- and
Tunnel Formwork
0,462
0,729
0,222
40
104031
111567
030070
Slab Formwork
150
265
503
Service
Item no. Weight kg
030070
0,222
Service
504
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
515
514
514
514
514
515
513
512
506
506
515
509
512
506
506
513
513
507
507
507
508
508
508
512
516
508
508
513
509
510
511
517
515
515
516
516
516
516
Anchor Sleeve M24
Anchor Sleeve M24, galv.
Anchor Sleeve M24, Special, Stainless Steel
Cone FRC for Anchor Sleeve
GKB Abutment Bracket 180
GKB Abutment Platform 180 x 120
GKB Anchor Bolt M 24 x 200/10°
GKB Board Formwork 140 x 120
GKB Cantilever Parapet Bracket 180
GKB Cantilever Parapet Platform 180 x 120
GKB Handrail Post 115°
GKB Handrail Post 90°/160
GKB Protection Board 120
GKB Protection Board 90/120
GKB Side Formwork 60 x 120
GKB Side Formwork Beam
GKB Side Formwork Bracket
GKB Socket M24/15-35
GKB Soffit Formwork 45 x 120
GKB Soffit Formwork Beam
GKB Spindle for Cantilever Slab Formwork
GKB Work Cage
GKB Work cage protection panel
Guardrail Post GKB
Plug 32 mm Fibre Reinforced Concrete
Ratchet Wrench 1/2"
Socket SW 24-1/2"
Socket SW 36-3/4"
505
Service
026420
026230
102111
108360
026240
116233
750076
102217
102220
102219
102394
102195
102327
102185
102184
102396
102395
102187
102186
102188
102778
102779
102329
102822
102317
102193
102190
102328
102196
102197
104181
114299
116234
026250
021790
072180
102784
102785
Item no. Weight kg
316,000
259,000
GKB Cantilever Parapet Platforms
Ready-to-use platform for cantilvered parapet up to
max. b = 45 cm and max. h = 60 cm.
Complete with
1 pc. 102492 Bolt Ø 16 x 200
Note
Wrench size SW 24.
Technical Data
SW 24
Ø16x200
660
102184
102185
Wall Formwork
Column Formwork
SW 24
102219
102220
268,000
221,000
GKB Abutment Platforms
Ready-to-use platform for cantilvered parapet in
the abutment area up to max. b = 45 cm,
max. h = 60 cm.
Complete with
2 pc. 102492 Bolt Ø 16 x 200
Note
Wrench size SW 24.
Technical Data
Ø16x200
1185
SW 24
155
284
Working Platforms
Climbing Systems
Shoring Systems
575 / 287,5
Slab Formwork
1250 / 625
575 / 287,5
2186
1250 / 625
575 / 287,5
Service
506
2400 / 1200
575 / 287,5
Bridge- and
Tunnel Formwork
1820
2400 / 1200
Formwork Girders
Formwork Girders
Wall Formwork
Completely pre-assembled. As guardrail with GKB.
575
1250
575
Column Formwork
1893
348
Completely pre-assembled. As guardrail with GKB.
Shoring Systems
50,400
287,5
625
287,5
Climbing Systems
1893
102187
Slab Formwork
2400
348
1200
Working Platforms
Completely pre-assembled.
As guardrail with GKB for forming electrical protection slabs.
25°
625
1200
287,5
Bridge- and
Tunnel Formwork
287,5
1204
1960
94,100
1772
102188
507
Service
Item no. Weight kg
102186
77,100
Item no. Weight kg
102778
102779
33,700
54,800
GKB Side Formwork
Ready-to-use formwork with open formwork for
cantilevered parapets up to max. b = 45 cm,
h = 60 cm.
623
Wall Formwork
Column Formwork
600 / 287,5
19,400
For supporting and aligning the GKB protection
board.
Slab Formwork
102329
Shoring Systems
688
Ø16x200
Climbing Systems
min 35
max 330
Ø17
58,800
85,100
GKB Soffit Formwork
cantilevered parapets up to max. b = 45 cm,
h = 60 cm.
Complete with
6 pc. 102492 Bolt Ø 16 x 200
600 / 287,5
102193
102190
508
744
623
523
200 / 160
600 / 287,5
1250 / 625
Bridge- and
Tunnel Formwork
Working Platforms
160
Complete with
3 pc. 102492 Bolt Ø 16 x 200
Note
Wrench size SW 24.
SW 24
4x30=120
Service
600 / 287,5
1250 / 625
2450 / 1200
2450 / 1200
Formwork Girders
Formwork Girders
Wall Formwork
electrical protection slabs. In connection with the
GKB Cantilevered Parapet Platform 120 x 180.
625
Column Formwork
287,5
1200
287,5
Item no. Weight kg
102195 119,000
371
210
Slab Formwork
Shoring Systems
Complete with
2 pc. 102492 Bolt Ø 16 x 200
Note
Wrench size SW 24.
226
Climbing Systems
Ø16x200
SW 24
200
Working Platforms
For supporting and adjusting GKB board formwork
140 x 120.
Bridge- and
Tunnel Formwork
19,000
102196
Accessories
509
Service
19,000
min 610
max 820
102196
569
1500
Item no. Weight kg
102197 606,000
GKB Work Cage
For moving completely assembled GKB units.
With retractable-type fall arrester.
Complete with
2 pc. 102737 Locking Pin Left
2 pc. 102690 Clamping Spindle 1140
Safety Instructions
Follow assembly instructions at all times.
Slab Formwork
Climbing Systems
Shoring Systems
2559
Bridge- and
Tunnel Formwork
Working Platforms
1616
940
Service
1472
510
2785
2467
Column Formwork
4304
Wall Formwork
Formwork Girders
Formwork Girders
Column Formwork
4304
Wall Formwork
Complete with
2 pc. 102737 Locking Pin Left
2 pc. 104190 Clamping Spindle 1940
Safety Instructions
Follow assembly instructions at all times.
Shoring Systems
Slab Formwork
3585
Working Platforms
Climbing Systems
2516
Bridge- and
Tunnel Formwork
1616
940
1472
511
Service
For moving completely assembled GKB units
with electrical protection walls in the area of the
overhead power lines with max. height of 1.90 m.
With retractable-type fall arrester.
3267
Item no. Weight kg
104181 628,000
Item no. Weight kg
102327
98,500
For cantilevered parapet platforms and asembly of
special platforms.
Wall Formwork
Complete with
2 pc. 102492 Bolt Ø 16 x 200
Note
Wrench size SW 24.
SW 24
Ø16x200
Column Formwork
SW 24
500
1806
102217
84,200
For abutment platforms and assembly of special
platforms.
Complete with
1 pc. 102492 Bolt Ø 16 x 200
Note
Wrench size SW 24.
245
Shoring Systems
Slab Formwork
2162
SW 24
278
1834
102822
6,340
GKB Side Form Bracket
Used for side formwork.
661
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
1185
Ø16x200
Service
228
512
97
625
490
120
Formwork Girders
Formwork Girders
For the slab formwork.
Complete with
3 pc. 102492 Bolt Ø 16 x 200
523
128
Wall Formwork
Item no. Weight kg
102328
19,200
Ø16x200
228
Column Formwork
744
11,600
GKB Handrail Post
For Guardrails 240 and 120.
Climbing Systems
For Guardrails 90/120.
750076
0,040
With nut.
Working Platforms
1204
60
Bridge- and
Tunnel Formwork
25°
Note
Spanner size SW 13.
90
M8
21,500
60
1475
102396
Ø9
Shoring Systems
348
Slab Formwork
1660
Ø40
513
Service
102395
Formwork Girders
Item no. Weight kg
026230
1,010
Anchor Sleeve M24
Note
100
8
Wall Formwork
68
120
15
Ø 31
12
026240
026250
0,026
0,005
102111
1,010
Accessories
Note
100
Slab Formwork
Column Formwork
DW 20
68
8
120
15
Ø 31
DW 20
026240
026250
0,026
0,005
108360
3,300
Climbing Systems
Shoring Systems
Ø12
Accessories
Note
L
120
15 20
min 108
12
30
M 24
026240
026250
0,026
0,005
026240
0,026
Accessories
39
Service
514
50
24
Ø31
Bridge- and
Tunnel Formwork
Working Platforms
M 24x50
40
50
Formwork Girders
Item no. Weight kg
026250
0,005
Ø 26
Wall Formwork
Ø 23
27
Column Formwork
Ensures a concrete cover of 30 mm.
Ø 50
0,121
Ø 32
116233
For closing the Cone made of fibre reinforced concrete.
Shoring Systems
0,033
Ø32
116234
Slab Formwork
55
20
0,123
Note
Allen Key SW 14.
Climbing Systems
026420
60
SW 14
Ø5
M 24
For inclinations up to 10°.
Note
Wrench size SW 24.
Bridge- and
Tunnel Formwork
1,980
200
100
102394
Accessories
Nail 3 x 80
SW 24
M 24
515
Service
0,445
0,005
Ø 75
027212
710312
Working Platforms
40
Formwork Girders
Item no. Weight kg
102317
4,080
For subsequent installation of anchors.
Note
Wrench size SW 55.
Wall Formwork
400
min 130
max 360
M 24
120
M 36
Ø10
Column Formwork
SW 55
0,560
Ratchet Wrench 1/2"
Slab Formwork
072180
Shoring Systems
300
0,095
Socket SW 24-1/2"
Working Platforms
Climbing Systems
102784
SW 24
102785
0,452
Socket SW 36-3/4"
Service
Bridge- and
Tunnel Formwork
SW 36
021790
1,000
Note
Wrench size SW 24.
.
516
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
1437
35
Ø22
517
Column Formwork
1679
Wall Formwork
Formwork Girders
Guardrail Post GKB
For fixing to the reinforcement or to the embedded anchors.
Service
80
max 242
1225
154
Item no. Weight kg
114299
11,100
679
160
Service
518
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Plywood
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
523
523
523
523
523
523
523
523
523
523
522
522
522
523
520
520
520
520
520
520
520
520
520
520
523
521
521
521
521
521
521
522
522
520
520
3-Ply Panel 21 mm 1500 x 500 mm (red/yell)
3-Ply Panel 21 mm 2000 x 1000 mm (yellow)
Arauco Pine 21 mm 2500 x 1250 mm
Brasil Coated Ply 21 mm 2500 x 1250 mm
Chinese Coated Ply 21 mm 1250 x 2500 mm
Conifer Plywood 20 mm 2500 x 1250 mm
Fin-Ply 12 mm 1500 x 3000 mm
Fin-Ply 15 mm 1500 x 3000 mm
Fin-Ply 18 mm 1500 x 3000 mm
Fin-Ply 21 mm 1250 x 2500 mm
Fin-Ply 21 mm 1500 x 2500 mm
Fin-Ply 21 mm 1500 x 3000 mm
Fin-Ply 30 mm 1250 x 3610 mm
Fin-Ply 9 mm 1500 x 3000 mm
Fin-Ply Maxi 20 mm 5400 x 2000 mm
FinNa-Ply 21 mm 2500 x 1250 mm
PERI Beto 21 mm 1250 x 2500 mm
PERI Birch 21 mm 1250 x 2500 mm
PERI Spruce 21 mm 2500 x 1250 mm
Plywood 4 mm 2500 x 1250 mm
Rus-Ply 21 mm 1250 x 2500 mm
Rus-Ply 21 mm 1500 x 3000 mm
519
Service
050070
050190
050080
050040
052590
050000
050200
050030
052380
052839
052621
052622
052624
052800
052150
052159
052240
052260
052060
052270
052460
052095
052829
052823
052828
052821
052822
052824
052820
052830
052831
052010
052020
052261
052271
Formwork Girders
Item no. Weight kg
052460
052260
052060
052270
052240
052159
052150
052095
20,999
14,250
14,250
14,250
12,700
10,500
8,800
6,650
Fin-Ply 30, 21, 18, 15, 12, 9 mm
Fin-Ply 30 mm 1250 x 3610 mm
Fin-Ply 21 mm 1250 x 2500 mm
Fin-Ply 21 mm 1500 x 2500 mm
Fin-Ply 21 mm 1500 x 3000 mm
Fin-Ply 18 mm 1500 x 3000 mm
Fin-Ply 15 mm 1500 x 3000 mm
Fin-Ply 12 mm 1500 x 3000 mm
High-grade coated plywood to meet the highest
requirements.
Note
Cross-bonded birch veneers. Coated with
220 g/m² reinforced phenolic resin on both sides.
Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
.
052823
052829
14,250
14,250
Fin-Ply Maxi 20 mm
High-grade fair-faced concrete plywood for highquality surfaces free of joints.
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Plywood
Note
15 cross-bonded birch veneers. Coated with
540 g/m² (7.50 x 2.70 m) or 540/220 g/m² (5.40
x 2.00 m) reinforced phenolic resin 540 g/m² on
both sides.
052261
052271
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
.
Rus-Ply 21 mm
Rus-Ply 21 mm 1250 x 2500 mm
Rus-Ply 21 mm 1500 x 3000 mm
Coated plywood for smooth concrete surfaces.
Note
.
Service
14,250
14,250
520
High-grade coated plywood.
Note
15 cross-bonded birch veneers coated with
Wall Formwork
Item no. Weight kg
052820
14,250
Formwork Girders
Plywood
052824
052821
052822
11,900
11,900
11,900
PERI Beto 21 mm
Note
Combination mirror plywood from Finland. 11 alternate veneers of birch and spruce with birch face
veneers. Phenolic resin coating 120 g/m² on both
sides.
Slab Formwork
Column Formwork
.
.
Working Platforms
Note
Low weight but extremely robust. 11 veneers of
Nordic coniferous wood. Phenolic resin coating
120 g/m² on both sides.
Bridge- and
Tunnel Formwork
PERI Spruce 21 mm
Inexpensive coated plywood.
10,900
10,900
521
Service
052831
052830
Climbing Systems
Shoring Systems
.
Item no. Weight kg
052020
052010
6,100
2,600
Plywood 8, 4 mm
Wall Formwork
Formwork Girders
Plywood
Note
Hardwood, 3 or 5 veneers.
Phenolic resin coating 120 g/m² on both sides.
Edges sealed all round.
Column Formwork
.
12,000
12,000
Slab Formwork
052622
052624
Coated Plywood 21 mm
Inexpensive coated plywood for slab areas.
Note
13-15 poplar veneers coated on both sides with
120 g/m² phenolic resin. Edges sealed all round.
Shoring Systems
.
Climbing Systems
052621
Inexpensive coated plywood for slab areas.
Note
Combination plywood consisting of 9 veneers with
hardwood facing veneers and pine middle layer.
Coated with phenolic resin 120 g/m² on both
sides.
Bridge- and
Tunnel Formwork
Working Platforms
.
Service
11,030
522
Item no. Weight kg
3-S Panel 21 mm
Large-area plywood formlining with yellow melamine resin coating.
Note
3 x 7 mm cross-bonded spruce layers, can also be
supplied with a middle layer of staves.
Wall Formwork
10,500
10,500
10,500
10,500
10,500
10,500
10,500
10,500
10,500
3-S Formwork Panel 21 mm
Easy-to-handle plywood formlining with red or yellow melamine resin coating.
Note
E-profile steel edge for front side protection available on request.
Shoring Systems
050070
050080
050000
Column Formwork
.
Slab Formwork
050190
050040
050200
050030
052590
052380
Formwork Girders
Plywood
Note
7 to 15 veneers. Sanded surface and in part sealed
on side side.
Bridge- and
Tunnel Formwork
FinNa Plywood 20, 21 mm
High-grade shuttering plywood.
.
10,900
11,330
9,950
523
Service
052828
052839
052800
Working Platforms
Climbing Systems
.
Service
524
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
531
531
531
527
530
529
526
530
529
530
529
531
531
531
531
531
527
526
532
532
532
533
533
526
532
526
527
527
527
531
528
528
528
527
531
Butt Strap 102/30 mm
Butt Strap 54/30 mm
Drying Locker Klima TS 2000
Formwork Bracket-2
Guardrail Frame RGP 120
Guardrail Post HSGP
Guardrail Post RGP 120
Guardrail Post
HM Concrete Scraper L = 1180, B = 102
HM Turnover Board 16/16 mm
Peg
Plug for Stopend Sleeve DW 15
Pressure Sprayer
Release Agent Bio Clean, 20 L
Release Agent PERI Clean, 20 L
Slab Stopend Bar 105
Spray Nozzle (0,1 F 110)
Stopend Sleeve DW 15
Stopend Trestle
Tie Rod B 15 l = 0.30 m
Trestle P 80
Wall Clamp 105
Wall Clamp 55
Wall Clamp 75
Wood Handle L = 1180 mm
525
Service
065023
065024
065022
030050
065017
065066
065062
109010
034580
108053
035700
065020
065021
065018
065019
065025
065042
065060
031520
031440
031455
031420
031435
065063
031530
065039
065040
030740
030150
065051
065046
065045
065076
030110
065026
Note
90
For forming with vertical slab stopend formwork
for up to 50 cm slab thicknesses.
7 x 80 = 560
1204
150
Item no. Weight kg
065063
6,470
Wall Formwork
Formwork Girders
348
138
90
034580
3,520
065062
9,820
Accessories
Guardrail Post HSGP
Formwork Bracket-2
For forming of small cantilevers up to 50 cm and
vertical stopends up to 30 cm.
Shoring Systems
Note
716
76
457
40
100
min 15
max 488
Working Platforms
Climbing Systems
656
245
Slab Formwork
Column Formwork
Ø20
034580
3,520
065039
0,075
Accessories
Guardrail Post HSGP
Anchoring for PERI stopend systems. With nailed
plugs.
Note
Service
Bridge- and
Tunnel Formwork
92
Ø23
52
Ø 42
DW 32
065060
0,001
065060
0,001
526
Accessories
For closing the Stopend Sleeve DW 15.
Item no. Weight kg
1,550
0,000
0,420
Tie Rods B15
Tie Rod B 15 l = 0.30 m
Note
Technical Data
Wall Formwork
030740
030050
030150
Formwork Girders
Column Formwork
B 15
0,799
Note
Wrench size SW 27.
Technical Data
96
Slab Formwork
030110
50
Shoring Systems
110
SW 27
DW 15
6,820
Stopend Trestle
For forming base slabs up to 60 cm thick.
Climbing Systems
065040
Ø6
Working Platforms
600
66
140
Ø35
Ø35
200
Bridge- and
Tunnel Formwork
Peg
For fixing the stopend trestle in the ground.
527
Service
25
Ø 30
1,030
max 650
Accessories
Peg
25
065042
min 450
45
1,030
455
065042
83
Item no. Weight kg
065045
5,080
Wall Clamp 55
For forming strip foundations, small beams etc.
For utilizing the max. concreting height of 30 cm,
we recommend a distance of 1.20 m on foundations.
Wall Formwork
Formwork Girders
Column Formwork
300
758
max 550
6,170
Slab Formwork
065076
Wall Clamp 75
400
max 750
065046
Working Platforms
Climbing Systems
Shoring Systems
958
Wall Clamp 105
500
Bridge- and
Tunnel Formwork
1200
max 1050
Service
12,700
528
Formwork Girders
Guardrail Post HSGP
35
Column Formwork
65
1300
1050
440
Wall Formwork
120
Item no. Weight kg
034580
3,520
15,100
560
120
Working Platforms
Guardrail Holder
460
30
529
Service
311
Bridge- and
Tunnel Formwork
995
65
min 20
max 420
9,790
400
35
035700
Climbing Systems
max 417
Shoring Systems
1360
1020
Slab Formwork
065066
As guardrail on slab edges, balconies, stringers
etc.
145
Item no. Weight kg
108053
6,940
1195
500
Wall Formwork
Formwork Girders
Ø 48,3
160
103606
0,330
109010
22,000
180
Accessories
1156
Shoring Systems
Slab Formwork
Column Formwork
65
065017
Working Platforms
Climbing Systems
2685
56,000
Exhaust air dryer for drying wet clothes. With
clock timer and continuous temperature control
unit.
Technical Data
Voltage 230 V, 50-60 Hz, power consumption
1500 W.
630
Service
1900
Bridge- and
Tunnel Formwork
39
595
530
Formwork Girders
Trestle P 80
As a single trestle or in combination to form a
large area scaffold. Tilt-resistant on all sides.
1000
1249
HM-Concrete Scrapers
Concrete scraper with ash wood handle, hardmetal reversible cutter and chamfered butt strap
made of tool steel.
L
900
1180
1180
1180
B
102
54
102
170
Slab Formwork
1,200
1,400
1,800
2,200
800
Shoring Systems
B
065019
065018
065020
065021
Column Formwork
796
Wall Formwork
280
Working Platforms
Accessories HM-Concrete Scraper
Butt Strap 54/30 mm
Bridge- and
Tunnel Formwork
0,035
0,070
0,120
0,018
1,030
065022
065023
065024
065025
065026
Climbing Systems
L
531
Service
Item no. Weight kg
065051
18,500
Item no. Weight kg
031520
4,440
Pressure Sprayer
For spraying PERI Bio Clean and PERI Clean
concrete release agents. Content: 5 litres.
.
031530
0,064
031530
0,064
031440
031455
0,910
0,910
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Spare part for the PERI pressure sprayer for concrete release agent.
Release Agent Bio Clean
Chemical, physically-acting concrete release agent
on the basis of ultra-pure, biologically degradable
components. Can be used on all standard types
of formwork and construction equipment. Water
Hazard Class 1 (WGK 1).
Note
Requirements: 50-90 m² forming area per litre.
Safety Instructions
Take into consideration PERI Bio Clean safety data
sheet!
Bridge- and
Tunnel Formwork
Working Platforms
.
Service
Accessories
532
Item no. Weight kg
Wall Formwork
Note
Requirements: 50-90 m² forming area per litre.
Safety Instructions
See PERI Bio Clean safety data sheet.
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
.
Bridge- and
Tunnel Formwork
Release Agent PERI Clean
Chemical, physically-acting concrete release
agent on the basis of mineral oil. Can be used on
all standard types of formwork and construction
equipment. Water Hazard Class 1 (WGK 1).
0,920
0,920
533
Service
031420
031435
Formwork Girders
Service
534
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
536
536
541
542
542
536
536
537
539
537
539
540
542
537
536
536
538
538
539
540
541
540
541
541
Extension GF 10
535
Service
065068
065016
111392
100660
100678
025660
025670
065067
111738
111396
065080
065081
061510
106939
103434
103429
061530
061500
065050
066094
110939
115058
115385
115427
Item no. Weight kg
Pallets RP-2, galv.
880
1080 / 1380
680
100
Column Formwork
1280 / 1580
1200 / 1500
065068
065016
86,000
86,100
Crate Pallets 80 x 120
Shoring Systems
Slab Formwork
Safety Instructions
800
Technical Data
Safety Instructions
835
025660
025670
Bridge- and
Tunnel Formwork
Hardware Boxes 80 x 120
Technical Data
Safety Instructions
835
500
1240
Service
64,300
64,300
536
100
Working Platforms
Climbing Systems
970
1240
600
33,400
40,200
850
103434
103429
Wall Formwork
Formwork Girders
Formwork Girders
For closing crate pallets 80 x 120 or mesh pallets
80 x 120.
37
Column Formwork
745
798
1100
Wall Formwork
Item no. Weight kg
065067
9,310
20,100
Safety Instructions
973
563
408
1143
Slab Formwork
106939
1160
Shoring Systems
1330
Climbing Systems
Complete with
Safety Instructions
1010
750
Working Platforms
693
230
Bridge- and
Tunnel Formwork
880
1140
537
Service
953
878
For stacking GF 100 guardrails.
493
28,100
385
111396
Panels 150 x 75.
Safety Instructions
1720
Column Formwork
Slab Formwork
82,400
panels 150 x 75.
1510
640
1630
760
Complete with
5 pc. 100707 Lashing 25 x 5750 mm
Safety Instructions
1550
Working Platforms
250
Climbing Systems
2110
Shoring Systems
061530
1970
Item no. Weight kg
061500
76,700
Wall Formwork
Formwork Girders
Service
Bridge- and
Tunnel Formwork
2310
538
Formwork Girders
Column Formwork
970
300
Wall Formwork
Safety Instructions
400
For stacking and transportation of ST 100 Stacking
Tower components.
Capacity:
84 stacking frames + base and head spindles +
diagonals.
700
Item no. Weight kg
065050 124,000
2280
2400
Slab Formwork
900
For stacking and transportation of GRIDFLEX Filler
Panel GFL 183 x 20 and Main Beam BD 210 or
Crossbeam BD 210.
Safety Instructions
1095
Climbing Systems
63,900
925
111738
Shoring Systems
1020
1020
Safety Instructions
1210
910
1360
1030
539
Service
820
64,700
1070
065080
Bridge- and
Tunnel Formwork
Working Platforms
2190
Safety Instructions
820
Column Formwork
1240
1070
Item no. Weight kg
065081
66,300
Wall Formwork
Formwork Girders
1510
910
1580
1030
7,490
Safety Instructions
066094
7,980
For stacking and transportation of 2-8 DOMINO
panels of all sizes. Suitable for crane and fork-lift
transport. 4 pieces per stack.
Safety Instructions
Load-bearing capacity 250 kg per ring, 1 to per
stack.
Service
Bridge- and
Tunnel Formwork
540
150
125
100
1115
Working Platforms
Climbing Systems
105
Shoring Systems
810
Slab Formwork
115058
Complete with
Safety Instructions
Load capacity 175 kg per ring, 350 kg per stack
Wall Formwork
For stacking 10 Standard Element GFP 200 x
100, Filler Element Cross GFC 200 x 100 or Filler
Element Longitudinal GFL 150 x 100 respectively.
Suitable for crane and fork-lift transport. 2 pieces
per stack.
111392
2,970
Extension GF 10
Shoring Systems
Accessories
Ø48,3
GFP 200 x 100 and GFL 150 x 100.
Yellow powder-coated.
Climbing Systems
2,090
33
115427
1258
Bridge- and
Tunnel Formwork
GFC 200 x 100. Red powder-coated.
43
4,230
161
115385
Working Platforms
130
933
541
Service
2,090
4,230
835
115427
115385
190
Slab Formwork
1085
Column Formwork
468
959
491
Item no. Weight kg
110939
21,700
Formwork Girders
Item no. Weight kg
100660
100678
60,400
65,600
Frame Pallets USP, galv.
For stacking and transportation of PERI UP scaffold components.
Wall Formwork
Formwork Girders
Complete with
1 pc. 100707 Lashing 25 x 5750 mm
6 pc. 100706 Tube l = 1.0 m
Note
36 T-Frame UVT with Spigot Tube UV 165 or Base
Frame UVF with L-Frame UVL.
Safety Instructions
061510
110,000
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
542
832
Technical Data
Safety Instructions
.
Service
775
590
1085 / 1405
Shoring Systems
Slab Formwork
Column Formwork
1020 / 1340
Service
543
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
544
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Machines and Tools
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
553
553
547
546
546
549
552
552
546
547
551
552
555
554
554
554
554
554
546
553
546
554
553
551
546
547
547
546
548
549
553
554
549
549
549
548
548
548
549
554
547
552
552
547
549
550
550
550
550
550
554
552
552
552
551
551
550
551
549
549
549
548
Bit Holder for DSSE 642
Bit Point TX 30
Centrepivot VHM Ø 60 mm
Concrete Cone Gauge
Cone Spanner TRH
Depth Chuck for DSSE 642
DK Cone Remover UNI
Drill Bit HSS DIN 338, Ø 5,1 mm
Drill Bit Ø 20 mm
Drill Bit Ø 25 mm
Drill Bit Ø 35 mm
Drill Bit Ø 40 mm
Drill Bit Ø 50 mm
Form Lining Drill Bit Ø 20 x 1000 mm
Insert Socket SW 19
Magnet Holder for SCU 7-9
Magnet Holder for DSSE 642
Power-Screwdriver DSSE 642
Pre-Cutter HM Ø 40 mm
Pre-Cutter VHM Ø 60 mm
Ratchet Lever SW 19
Ratchet Wrench 1"
Ratchet Wrench 1/2"
Ratchet Wrench 3/4"
Reverse Plate HM Ø 40 mm
Reverse Plate Twist Drill HM Ø 40 mm
Reverse Plate Twist Drill VHM Ø 60 mm
Reverse Plate VHM 28,5 Ø 60 mm
Rivet Gun BZ 48, l = 500 mm
Router DW 625-E
Socket SW 19-1/2"
Socket SW 27-1/2"
Socket SW 30-3/4"
Socket SW 36-3/4"
Socket SW 46-1"
Socket SW 55-1"
Tie Rod Spanner MX
Torx for Centrepivot Ø 60 mm
Torx for Pre-Cutter Ø 60 mm
Torx for Reverse Plate Ø 60 mm
Torx for Reverse Plate/Pre-Cutter Ø 40 mm
545
Service
027212
027930
024921
072220
072140
105328
101995
110634
072240
024923
031655
031644
727112
031040
031080
031030
031100
031120
072150
070740
072160
031090
027200
114797
072230
024922
024920
072210
105317
105331
027180
021790
029610
072180
051764
105318
105311
105326
105330
044890
106081
031657
031656
072170
029620
029650
057276
102785
029630
029640
031480
027211
027213
027210
108129
114290
031070
031050
105346
105347
105327
105367
Item no. Weight kg
072210
1,600
Universal power screwdriver with adjustable coupler, continuous electronic speed control and clockwise/anti-clockwise rotation.
Wall Formwork
Formwork Girders
Machines and Tools
Column Formwork
.
072220
072230
072240
072140
0,400
0,425
0,110
0,005
Accessories
Bit Point TX 30
072220
072230
072240
072140
0,400
0,425
0,110
0,005
Accessories Bit Holder for SCU 7-9
Bit Point TX 30
072150
2,860
Climbing Systems
Shoring Systems
Slab Formwork
Technical Data
Lightweight electric power wrench for momentfree working, with clockwise/anti-clockwise rotation. With 1/2” square drive.
Technical Data
072160
Service
0,340
.
Bridge- and
Tunnel Formwork
Working Platforms
.
546
Formwork Girders
Machines and Tools
Item no. Weight kg
072170
0,100
Wall Formwork
SW 13
2,700
Powerful two-speed universal power screwdriver
with adjustable connector, continuous electronic
speed control and clockwise/anti-clockwise rotation.
Technical Data
Rotation speed 0-600 and 0-1800/min.
Column Formwork
024920
Accessories Bit Holder DSSE 642
Magnetic Holder for DSSE 642
106081
5,100
Router DW 625-E
Powerful router with electronic controll.
Spindle locking device for simple change of the
cutting bit. Compactly and handy design.
Climbing Systems
0,017
0,090
0,175
Working Platforms
024921
024922
024923
Technical Data
Rotation speed 8000 - 20000/min-1.
Bridge- and
Tunnel Formwork
Accessories
.
0,017
0,090
0,175
547
Service
024921
024922
024923
Shoring Systems
Slab Formwork
.
Formwork Girders
Machines and Tools
Item no. Weight kg
105311
0,145
For drilling the veneers to be repaired Ø 40 mm.
Ø40
Column Formwork
Ø12
Wall Formwork
76
105317
105318
105367
0,008
0,018
0,002
Accessories
Pre-Cutter HM (drill Ø 40 mm)
105317
105318
105367
0,008
0,018
0,002
Access. Reverse Plate Twist Drill HM Ø 40 mm
105326
0,260
105317
105367
For drilling the veneers to be repaired Ø 60 mm.
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
105318
Ø60
Service
Bridge- and
Tunnel Formwork
Ø12
63
105330
105331
105330
105328
105347
105327
105346
548
0,003
0,012
0,003
0,002
0,002
0,002
Accessories
Pre-Cutter VHM (drill Ø 60 mm)
105328
105331
105327
105346 105347
Formwork Girders
Machines and Tools
0,003
0,012
0,003
0,002
0,002
0,002
Access. Reverse Plate Twist Drill VHM Ø 60 mm
072180
0,560
Ratchet Wrench 1/2"
Column Formwork
105331
105330
105328
105347
105327
105346
Wall Formwork
Item no. Weight kg
2,650
Ratchet Wrench 3/4"
5,300
Ratchet Wrench 1"
Working Platforms
029610
Climbing Systems
630
0,075
Socket SW 19-1/2"
SW 19
029620
Bridge- and
Tunnel Formwork
900
549
Service
051764
Shoring Systems
Slab Formwork
300
Formwork Girders
Machines and Tools
Item no. Weight kg
029650
0,160
Socket SW 27-1/2"
Slab Formwork
Column Formwork
Wall Formwork
SW 27
057276
0,625
Socket SW 30-3/4"
SW 30
102785
0,452
Socket SW 36-3/4"
Shoring Systems
SW 36
0,580
Socket SW 46-1"
Working Platforms
Climbing Systems
029630
SW 46
029640
1,000
Socket SW 55-1"
031070
1,260
140
Bridge- and
Tunnel Formwork
SW 55
Service
250
550
15
Formwork Girders
Machines and Tools
260
3,480
20
For Wingnut Counterplate DW 15, Wingnut Pivot
Plate DW 15 and Wingnut DW 15.
Column Formwork
108129
Wall Formwork
140
Item no. Weight kg
031050
1,780
74
25
0,940
DK Cone Remover UNI
For removing DK Sealing Cones.
Climbing Systems
117
031655
Shoring Systems
130
Slab Formwork
1096
30
327
Tie Rod Spanner MX
For easy release of the Tie MX.
Working Platforms
2,100
560
0,893
95
114797
Bridge- and
Tunnel Formwork
600
25
551
Service
114290
Item no. Weight kg
031644
031656
031657
0,580
0,600
0,660
DK, SK Tongs for Concrete Cone
For DK and SK Concrete Cones DW 15, SK
Concrete Cones DW 20 and KK Concrete Cones
M24 or SK Concrete Cones DW 26.
Column Formwork
Wall Formwork
Formwork Girders
Machines and Tools
101995
1,020
Concrete Cone Gauge
Installation of concrete cones flush with
the surface.
114
Shoring Systems
Slab Formwork
296
200
0,383
100
027210
027213
027211
15
3,300
2,300
0,760
Spanner SW for SB
For different applications.
L
645
570
380
L
Service
Cone Spanner TRH
112
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
110634
552
Formwork Girders
Machines and Tools
Item no. Weight kg
027180
1,760
Ratchet Lever SW 19
For moving Carriage CB 240 and SKSF 240.
Note
Spanner size SW 19.
027200
0,100
Insert Socket SW 19
027930
6,120
For shuttering of MULTIFLEX with GT 24 girders.
Slab Formwork
Accessories
Insert Socket SW 19
Ø34
49
Shoring Systems
0,100
95
027200
Column Formwork
Wall Formwork
795
For shuttering of MULTIFLEX with GT 24 or
VT 20 girders.
Working Platforms
2,980
85
150
070740
Climbing Systems
20
1572
190
0,445
M30 and M36.
SW 14
230
553
Service
027212
Bridge- and
Tunnel Formwork
1711
Item no. Weight kg
021790
1,000
Column Formwork
Note
Wrench size SW 24.
.
Wall Formwork
Formwork Girders
Machines and Tools
031480
2,460
031040
031080
031030
031100
031120
0,040
0,055
0,090
0,125
0,160
Drill
Drill
Drill
Drill
Drill
Drill
Bits
Bit Ø
Bit Ø
Bit Ø
Bit Ø
Bit Ø
20
25
35
40
50
mm
mm
mm
mm
mm
.
031090
0,620
.
044890
Service
2,120
For installing blind rivets Ø 5mm.
.
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
510
554
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
.
Wall Formwork
Item no. Weight kg
727112
0,010
Formwork Girders
For pre-drilling blind rivets Ø 5 mm.
555
Service
Machines and Tools
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Bolts, Nails, Pins
061230
710242
721817
710593
750330
710221
720610
710220
710219
710233
105402
710232
722169
780155
710299
714093
710222
721729
024910
104477
711078
781054
706462
024900
710226
029560
109612
113686
106797
026430
026220
029540
029550
710285
722859
104929
103518
710284
070100
018330
027340
035440
018320
018350
103740
780353
110598
110599
710266
102120
710224
710231
710225
710252
114727
706458
780357
026290
029420
029430
027990
027170
018050
027690
105400
037160
113012
556
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
EN 14399-4 M12 x 140-10.9
ISO 4014 M10 x 100-8.8, galv.
ISO 4014 M10 x 50-8.8, galv.
ISO 4014 M10 x 80-8.8, galv.
ISO 4014 M12 x 100-8.8, galv.
ISO 4014 M12 x 60-8.8, galv.
ISO 4014 M12 x 70-8.8, galv.
ISO 4014 M12 x 80-8.8, galv.
ISO 4014 M16 x 100-8.8, galv.
ISO 4014 M16 x 110-8.8, galv.
ISO 4014 M16 x 120-8.8, galv.
ISO 4014 M16 x 130-8.8, galv.
ISO 4014 M16 x 140-8.8, galv.
ISO 4014 M16 x 160-8.8, galv.
ISO 4014 M16 x 60-8.8, galv.
ISO 4014 M16 x 70-8.8, galv.
ISO 4014 M16 x 80-8.8, galv.
ISO 4014 M16 x 90-8.8, galv.
ISO 4014 M20 x 100-8.8, galv.
ISO 4014 M20 x 120-8.8, galv.
ISO 4014 M20 x 130-8.8, galv.
ISO 4014 M20 x 160-8.8, galv.
ISO 4014 M20 x 200-8.8, galv.
ISO 4014 M20 x 80-8.8, galv.
ISO 4014 M20 x 90-8.8, galv.
ISO 4014 M24 x 120-10.9, galv.
ISO 4014 M24 x 130-8.8, galv.
ISO 4014 M24 x 200-8.8, galv.
ISO 4014 M24 x 220-10.9, galv.
ISO 4014 M24 x 70-10.9, galv.
ISO 4014 M24 x 80-10.9, galv.
ISO 4014 M30 x 130-10.9, galv.
ISO 4014 M36 x 130-10.9, galv.
ISO 4014 M8 x 100-8.8, galv.
ISO 4014 M8 x 140-8.8, galv.
ISO 4014 M8 x 150-8.8, galv.
ISO 4014 M8 x 190-8.8, galv.
ISO 4014 M8 x 60-8.8, galv.
ISO 4016 M12 x 120-4.6 MU, galv.
ISO 4016 M12 x 140-4.6 MU, galv.
ISO 4016 M12 x 180-4.6 MU, galv.
ISO 4016 M12 x 40-4.6 MU, galv.
ISO 4016 M16 x 140-4.6 MU, galv.
ISO 4016 M16 x 160-4.6 MU, galv.
ISO 4016 M16 x 280-4.6 MU, galv.
ISO 4016 M8 x 25-4.6 MU, galv.
ISO 4017 M12 x 140-8.8, galv.
ISO 4017 M12 x 240-8.8, galv.
ISO 4017 M12 x 25-8.8, galv.
ISO 4017 M12 x 30-8.8, galv.
ISO 4017 M12 x 40-8.8, galv.
ISO 4017 M16 x 30-8.8, galv.
ISO 4017 M16 x 45-8.8, galv.
ISO 4017 M16 x 50-8.8, galv.
ISO 4017 M20 x 100-8.8, galv.
ISO 4017 M20 x 40-8,8, galv.
ISO 4017 M20 x 50-8.8, galv.
ISO 4017 M24 x 50-10.9, galv.
ISO 4017 M30 x 70-8.8, galv.
ISO 4017 M36 x 70-8.8, galv.
Ø 14 x 107, galv.
Ø 16 x 42, galv.
Ø 16 x 65/86, galv.
Ø 19 x 165, galv.
Ø 20 x 140, galv.
Ø 20 x 205, galv.
Ø 20 x 260, galv.
560
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
558
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
560
559
559
565
565
566
566
566
568
568
104031
107579
026200
105435
715585
113247
113247
111567
112815
115145
018060
022230
710304
710618
018280
051650
710240
024360
725462
024380
024390
024410
710295
710326
710709
024140
723439
750076
029440
051640
024490
024500
024510
024520
024270
024260
711060
110281
024090
710234
710330
710238
710229
706488
022250
710336
710334
780356
710381
070890
781053
105032
722086
711071
022210
722083
780304
722318
780305
780302
730050
024530
024310
024350
710262
021770
722457
Bolt Ø 21 x 120
Bolt Ø 25 x 160, KG, galv.
Bolt Ø 25 x 240, SKS, galv.
Bolt Ø 25 x 260, mont.
Bolt Ø 26 x 120
Clamping Plate M16 Nova Grip
Cotter Pin 7, galv.
Cotter Pin 8, galv.
Loop Bolt M20, left, galv.
Loop Bolt M20, right, galv.
Pin for GRV, galv.
Rivet DIN 7337 A 4,8 x 23, Alu
Rivet DIN 7337 A 5 x 12, Alu
Rivet DIN 7337 A 6 x 10, Steel
Rivet DIN 7337 B 5 x 20, GAV
Rivet DIN 7337 B 5 x 25, Alu
Screwnail 40mm, galv.
Screwnail 70 mm, galv.
Selftapping Screw 5,5 x 45 TX 30, galv.
Selftapping Screw 6,3 x 32, galv.
Sleeve ISO 8752 10 x 70, galv.
567
566
567
567
568
569
568
567
562
562
569
569
569
569
564
565
565
565
565
565
565
565
565
565
565
565
565
565
562
562
562
562
562
562
562
562
560
560
560
560
560
560
560
560
560
560
560
561
561
561
561
561
561
561
569
564
564
564
564
564
564
564
564
564
563
564
569
Formwork Girders
Bolts, Nails, Pins
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
569
564
564
564
564
564
564
563
563
563
563
563
563
563
563
562
561
561
561
561
561
561
561
561
561
561
561
561
562
559
559
559
Spax Screw TX 30 6 x 100, yellow galv.
Washer DIN 434 18, galv.
Washer ISO 7089 200 HV, A 12, galv.
Washer ISO 7093-1 200 HV, A 12, galv.
Washer ISO 7094 100 HV A 12, galv.
Washer R11 DIN 440, galv.
557
Service
711063
024950
024960
024970
024980
024990
024550
024540
024470
110272
024690
103444
104892
104647
103443
710880
780702
725574
711074
706454
710874
780354
750350
710886
113348
113349
113350
113347
710139
104278
104528
113007
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Item no. Weight kg
710284
710285
722859
104929
103518
710593
710242
721817
710221
720610
710220
750330
710299
714093
710222
721729
710219
710233
105402
710232
722169
780155
024900
710226
024910
104477
711078
781054
706462
109612
113686
0,031
0,050
0,066
0,050
0,060
0,062
0,063
0,040
0,067
0,075
0,087
0,100
0,123
0,139
0,160
0,170
0,184
0,200
0,200
0,210
0,246
0,278
0,255
0,340
0,303
0,300
0,360
0,447
0,545
0,600
0,839
Bolts ISO 4014-8.8, galv.
Bolt ISO 4014 M8 x 60-8.8, galv.
Bolt ISO 4014 M8 x 100-8.8, galv.
Bolt ISO 4014 M8 x 140-8.8, galv.
Bolt ISO 4014 M8 x 150-8.8, galv.
Bolt ISO 4014 M8 x 190-8.8, galv.
Bolt ISO 4014 M10 x 80-8.8, galv.
Bolt ISO 4014 M10 x 100-8.8, galv.
Bolt ISO 4014 M10 x 50-8.8, galv.
Bolt ISO 4014 M12 x 60-8.8, galv.
Bolt ISO 4014 M12 x 70-8.8, galv.
Bolt ISO 4014 M12 x 80-8.8, galv.
Bolt ISO 4014 M12 x 100-8.8, galv.
Bolt ISO 4014 M16 x 60-8.8, galv.
Bolt ISO 4014 M16 x 70-8.8, galv.
Bolt ISO 4014 M16 x 80-8.8, galv.
Bolt ISO 4014 M16 x 90-8.8, galv.
Bolt ISO 4014 M16 x 100-8.8, galv.
Bolt ISO 4014 M16 x 110-8.8, galv.
Bolt ISO 4014 M16 x 120-8.8, galv.
Bolt ISO 4014 M16 x 130-8.8, galv.
Bolt ISO 4014 M16 x 140-8.8, galv.
Bolt ISO 4014 M16 x 160-8.8, galv.
Bolt ISO 4014 M20 x 80-8.8, galv.
Bolt ISO 4014 M20 x 90-8.8, galv.
Bolt ISO 4014 M20 x 100-8.8, galv.
Bolt ISO 4014 M20 x 120-8.8, galv.
Bolt ISO 4014 M20 x 130-8.8, galv.
Bolt ISO 4014 M20 x 160-8.8, galv.
Bolt ISO 4014 M20 x 200-8.8, galv.
Bolt ISO 4014 M24 x 130-8.8, galv.
Bolt ISO 4014 M24 x 200-8.8, galv.
Working Platforms
Bridge- and
Tunnel Formwork
026430
026220
029560
106797
029540
029550
0,334
0,360
0,535
0,870
0,920
1,400
Bolts ISO 4014, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 80-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 220-10.9, galv.
Bolt ISO 4014 M30 x 130-10.9, galv.
Bolt ISO 4014 M36 x 130-10.9, galv.
systems.
L
70
80
120
220
130
130
Note
Wrench size SW 36.
L
Service
L
60
100
140
150
190
80
100
50
60
70
80
100
60
70
80
90
100
110
120
130
140
160
80
90
100
120
130
160
200
130
200
L
Climbing Systems
Shoring Systems
Bolts, Nails, Pins
558
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
0,022
0,060
0,132
0,140
0,180
0,276
0,310
0,480
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4016-4.6, MU, galv.
4016 M8 x 25-4.6 MU, galv.
4016 M12 x 40-4.6 MU, galv.
4016 M12 x 120-4.6 MU, galv.
4016 M12 x 140-4.6 MU, galv.
4016 M12 x 180-4.6 MU, galv.
4016 M16 x 140-4.6 MU, galv.
4016 M16 x 160-4.6 MU, galv.
4016 M16 x 280-4.6 MU, galv.
L
25
40
120
140
180
140
160
280
Wall Formwork
780353
035440
070100
018330
027340
018320
018350
103740
Slab Formwork
Bolt ISO 4017-8.8, galv.
Bolt ISO 4017 M12 x 25-8.8, galv.
Bolt ISO 4017 M12 x 30-8.8, galv.
Bolt ISO 4017 M12 x 40-8.8, galv.
Bolt ISO 4017 M12 x 140-8.8, galv.
Bolt ISO 4017 M12 x 240-8.8, galv.
Bolt ISO 4017 M16 x 30-8.8, galv.
Bolt ISO 4017 M16 x 45-8.8, galv.
Bolt ISO 4017 M16 x 50-8.8, galv.
Bolt ISO 4017 M20 x 40-8,8, galv.
Bolt ISO 4017 M20 x 50-8.8, galv.
Bolt ISO 4017 M20 x 100-8.8, galv.
Bolt ISO 4017 M30 x 70-8.8, galv.
Bolt ISO 4017 M36 x 70-8.8, galv.
With a continuous thread.
L
25
30
40
140
240
30
45
50
40
50
100
70
70
Shoring Systems
0,037
0,030
0,047
0,142
0,242
0,077
0,097
0,100
0,157
0,178
0,321
0,590
0,930
Climbing Systems
710266
102120
710224
110598
110599
710231
710225
710252
706458
780357
114727
029420
029430
Column Formwork
L
Zyl. Bolt
Zyl. Bolt
Zyl. Bolt
Zyl. Bolt
ISO
ISO
ISO
ISO
4762-8.8, galv.
4762 M12 x 60-8.8, galv.
4762 M12 x 90-8.8, galv.
4762 M30 x 70-8.8, galv.
L
60
90
70
Note
Spanner size SW 10.
0,067
0,089
0,700
L
559
Service
104278
104528
113007
Bridge- and
Tunnel Formwork
Working Platforms
L
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
026290
0,280
Bolt ISO 4017 M24 x 50-10.9, galv.
High-strength bolts for scaffold anchoring.
Note
Wrench size SW 36.
Column Formwork
Wall Formwork
50
SW 36
M 24
061230
0,142
Bolt EN 14399-4 M12 x 140-10.9
Note
Wrench size SW 22.
140
SW 22
711060
110281
0,418
0,418
Loop Bolt M20, galv.
Shoring Systems
Slab Formwork
M 12
160
024090
710234
710330
710229
710334
022250
0,005
0,010
0,017
0,033
0,064
0,100
Nut
Nut
Nut
Nut
Nut
Nut
Nut
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4032, galv.
4032 M 8-8, galv.
4032 M10-8, galv.
4032 M12-8, galv.
4032 M16-8, galv.
4032-M20-8, galv.
4032 M24-8, galv.
710238
706488
710336
0,033
0,110
0,220
Nut
Nut
Nut
Nut
ISO
ISO
ISO
ISO
4032, galv.
4032 M16-10, galv.
4032 M24-10, galv.
4032 M30-10, galv.
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
M 20
560
Ø25
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7042, galv.
7042 M6-8, galv.
7042 M8-8, galv.
7042 M10-8, galv.
7042 M12-8, galv.
7042 M16-8, galv.
7042 M20-8, galv.
7042 M24-8, galv.
750350
710886
0,027
0,041
780354
780702
725574
711074
706454
710874
0,002
0,006
0,009
0,011
0,017
0,032
Washer
Washer
Washer
Washer
Washer
Washer
Washer
113347
113348
113349
113350
0,013
0,043
0,087
0,174
Washers ISO 7094 100 HV, galv.
Column Formwork
0,001
0,006
0,011
0,017
0,030
0,065
0,070
Wall Formwork
Nut
Nut
Nut
Nut
Nut
Nut
Nut
Nut
722086
711071
780356
710381
070890
781053
105032
Shoring Systems
Working Platforms
Climbing Systems
HV, galv.
HV, A 8, galv.
HV, A 12, galv.
HV, A 14, galv.
HV, A 16, galv.
HV, A 20, galv.
HV, A 24, galv.
Bridge- and
Tunnel Formwork
200
200
200
200
200
200
200
7089
7089
7089
7089
7089
7089
7089
561
Service
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Slab Formwork
Washer ISO 7093-1 200 HV, galv.
Corresponds to old standard DIN 9021. With large
supporting area.
Item no. Weight kg
710880
0,032
0,019
Ø 11
112815
115145
0,290
0,000
Climbing Systems
3
Clamping Plates Nova Grip
Ø20 / Ø21
50 / 63
029440
051640
024270
024260
024490
024500
024510
024520
0,005
0,014
0,023
0,027
0,032
0,044
0,047
0,052
Lag
Lag
Lag
Lag
Lag
Lag
Lag
Lag
Lag
Screws DIN 571, galv.
Screw DIN 571 6 x 20, galv.
30 / 38
L
20
80
60
80
100
130
140
160
L
Bridge- and
Tunnel Formwork
Working Platforms
5
Ø34
710139
Service
30
26
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
18
57 / 71
Formwork Girders
Bolts, Nails, Pins
562
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
0,005
0,008
0,010
TSS-Torx, galv.
For Torx Bits TX 30. Self-drilling.
L
40
60
80
Wall Formwork
024540
024470
024690
L
Column Formwork
TX 30
0,009
0,011
0,015
0,020
TSS-Torx, galv.
For Torx Bits TX 30. Self-drilling.
L
38
44
58
78
Slab Formwork
103444
104892
104647
103443
L
Shoring Systems
TX 30
Climbing Systems
0,006
60
45
TX 30
Bridge- and
Tunnel Formwork
0,007
710262
Working Platforms
TX 30
563
Service
110272
Formwork Girders
Wall Formwork
Bolts, Nails, Pins
Item no. Weight kg
024550
024950
024960
024970
024980
024990
0,005
0,012
0,015
0,017
0,019
0,021
Spax Screws TX 30, yellow galv.
L
20
100
120
140
160
180
L
Shoring Systems
Slab Formwork
Column Formwork
TX 30
024530
024310
024350
0,001
0,005
0,010
Screwnails, galv.
.
018280
1,000
Note
75
65
021770
0,007
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Ø3,1
32
722083
780304
722318
780305
780302
730050
0,001
0,001
0,003
0,005
0,006
0,004
Rivets DIN 7337
L
23
12
10
20
25
30
L
564
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
603, galv.
603 M6 x 180 MU, galv.
603 M8 x 45 MU, galv.
603 M8 x 60 MU, galv.
603 M8 x 65 MU, galv.
603 M8 x 70 MU, galv.
603 M8 x 80 MU, galv.
603 M8 x 90 MU, galv.
603 M8 x 100 MU, galv.
603 M8 x 125 MU, galv.
603 M8 x 140 MU, galv.
603 M8 x 160 MU, galv.
603 M8 x 200 MU, galv.
603 M8 x 250 MU, galv.
L
B
180
24
45
22
22
60
65
22
22
80
80
22
90
22
100
80
125
113
140
28
160
148
200
150
250
150
Note
Wrench size SW 10.
Ø17 / Ø 21
L
B
Wall Formwork
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
F.H. Bolt DIN
With nut.
Column Formwork
0,060
0,028
0,030
0,036
0,033
0,036
0,040
0,050
0,058
0,070
0,074
0,090
0,109
Slab Formwork
051650
710295
710326
710709
024140
723439
750076
710240
024360
725462
024380
024390
024410
027990
0,150
Shoring Systems
M6/M8
SW 10 / SW 13
129
107
Climbing Systems
Ø26
Ø5,5
Ø14
0,030
027170
0,102
Accessories
Working Platforms
018060
60
Bridge- and
Tunnel Formwork
43
24
Ø5
0,030
Accessories
565
Service
018060
16
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
018050
0,171
110
64
Ø25
Ø5
Ø16
018060
0,030
027690
0,368
Accessories
165
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
85
125
Ø19
105400
0,330
140
89
Working Platforms
Climbing Systems
Ø8
Ø20
018060
0,030
107579
0,707
Accessories
154
Service
Bridge- and
Tunnel Formwork
87
10
Ø6
022230
566
0,033
Accessories
Ø25
Formwork Girders
Bolts, Nails, Pins
Item no. Weight kg
026200
0,590
For different connections for KG.
156
Wall Formwork
132
022230
0,033
105435
4,960
Column Formwork
25
Accessories
Slab Formwork
330
295
Ø 50
10
104031
0,462
Shoring Systems
0,033
Accessories
Bolt Ø 21 x 120
Climbing Systems
022230
Ø10
207
122
Ø6
0,030
111567
0,729
Accessories
Bridge- and
Tunnel Formwork
018060
Working Platforms
Ø21
Bolt Ø 26 x 120
207
122
Ø6
Ø26
0,033
Accessories
567
Service
022230
125
Ø20
018060
0,030
113012
0,000
Accessories
90
260
Ø20
0,030
715585
1,050
Accessories
Ø25
240
92
018060
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Complete with
205
Item no. Weight kg
037160
0,736
Wall Formwork
Formwork Girders
Bolts, Nails, Pins
Working Platforms
Ø20
Service
Bridge- and
Tunnel Formwork
022230
568
0,033
Accessories
Formwork Girders
Bolts, Nails, Pins
Ø25
260
Wall Formwork
92
0,033
022210
1,900
Accessories
Pin for GRB, galv.
For connecting the Articulated Waler GRB and
Slab Formwork
022230
Column Formwork
Ø20
200
145
Ø40
0,033
022230
018060
0,033
0,030
Accessories
Cotter Pin 5, 4, galv.
Climbing Systems
022230
Shoring Systems
Ø6
0,098
0,074
Cotter Pin 8, 7, galv.
Cotter Pin 8, galv.
Cotter Pin 7, galv.
Bridge- and
Tunnel Formwork
710618
710304
Working Platforms
Ø5
711063
722457
0,003
0,015
Ø7/Ø8
Sleeve ISO 8752, galv.
35 / 70
Ø 5 / Ø 10
569
Service
Item no. Weight kg
113247
1,130
Service
570
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Accessories
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
575
576
574
576
574
573
575
576
577
574
574
574
575
572
572
573
572
572
572
573
573
573
576
576
576
576
576
576
576
576
577
576
576
576
576
575
573
577
577
577
577
576
Angle Bracket 90°
Beam Connector, galv.
Bulldog-Spike Ø 48/12 mm
Clamp Lock
Framing Clip, galv.
Hook Strap HB for VT, galv.
PERI Hotknife
Peridrain Clip
Peridrain Edge Strip
Peridrain Edge Strip Clip
Peridrain Fabric b = 1.50, l = 25.0 m
Plug Ø 20 mm
Plug Ø 20/24 mm
Scaffold Tube Alu Ø 48,3 x 4,0, per m
Spanner for Clamp Lock, galv.
Spax Screw SK 3,5 x 45, galv.
571
Service
065073
123478
018310
070030
054240
031200
030790
026417
017030
030260
101706
018290
024880
031675
102098
102110
102099
031674
031673
030290
030300
026250
026411
026412
026413
026414
026419
026418
026415
026416
017040
070711
070712
070710
070713
030820
102109
017020
102400
017010
017000
065074
Item no. Weight kg
031673
031674
25,900
13,875
Peridrain Fabric
Drainage fabric for improving the water-cement
ratio and achieving a high-grade concrete surface
with no shrinking cavities.
B
031675
1,000
PERI Hotknife
For cutting and sealing Peridrain fabric edges.
Technical Data
.
Shoring Systems
0,129
For assembling the Peridrain fabric edge strip on
the lateral edge profiles with RUNDFLEX,
MAXIMO and TRIO elements.
72
102098
Service
0,073
Peridrain Clip
For attaching Peridrain fabric to the top and bottom
edge profiles on MAXIMO and TRIO elements.
40
78
Bridge- and
Tunnel Formwork
Working Platforms
78
Climbing Systems
102099
80
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Accessories
63
572
Formwork Girders
Accessories
Wall Formwork
For assembly of Peridrain fabric on the lateral edge
profiles with RUNDFLEX, MAXIMO and TRIO
elements. Fin-Ply 12 mm, l= 3.00 m.
121
Item no. Weight kg
102110
3,200
3000
030290
0,002
Plug Ø 20 mm
required.
Note
Shoring Systems
Cross-recessed countersunk head screws. For
mounting the edge strip to the edge strip retaining
clip.
Ø25
0,005
Ø21
102109
Slab Formwork
Column Formwork
12
13
Note
Climbing Systems
Plug Ø 20/24 mm
not required.
Ø 29
0,003
Working Platforms
17
030300
20
026250
0,005
2500
15
573
15
0,470
20
031200
Service
Ø 26
Bridge- and
Tunnel Formwork
Ø 23
27
Item no. Weight kg
030260
101706
0,500
1,230
Formwork Joints
Plastic profile strip for easier striking of shafts.
Wall Formwork
Formwork Girders
Accessories
34/65
22
2500 / 3000
Column Formwork
max 20
max 40
For TRIO column formwork and on external corners. Edge length 15 x 15 mm.
115
67
Shoring Systems
2700
0,098
Framing Clip, galv.
For connecting crossed timbers or girders.
36
1,000
018310
1,810
Accessories
For connecting crossed timbers or girders. With
captive Quick Jack Nuts.
min 200
320
max 280
018280
Ø4,8
Bridge- and
Tunnel Formwork
Working Platforms
98
185
Climbing Systems
018290
Ø12
174
Service
214
574
50
144
1,900
Slab Formwork
054240
Formwork Girders
Accessories
Item no. Weight kg
024880
0,481
For fixing VT girders on Steel Walers SRZ and
SRU, Profile U100 und U120.
38
Wall Formwork
70
152 (U 100)
030790
0,430
Column Formwork
162 (U 120)
172 (U 140)
Clamp Lock
For anchorage with anchoring wire Ø 5 to 10 mm.
Shoring Systems
100
Slab Formwork
40
1,500
For anchorage with anchoring wire Ø 5 to 10 mm.
Climbing Systems
030820
min 195
Technical Data
2500
575
Service
1,370
15
065073
Bridge- and
Tunnel Formwork
Working Platforms
max 70
Formwork Girders
Accessories
Item no. Weight kg
065074
0,450
Technical Data
123478
0,255
max 300
Angle Bracket 90°
For diverse timber connections.
Ø11
90
Column Formwork
Wall Formwork
16
min 220
Ø5
90
Slab Formwork
65
070030
0,015
Ø3
50
070710
070711
070712
070713
0,000
0,000
0,000
0,000
026415
026416
026417
026411
026412
026413
026414
026419
026418
3,550
1,500
0,000
3,550
7,100
10,650
14,200
17,750
21,600
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Ø12,4
7
Softwood Timbers DIN 4074-1
L
1000
2000
3000
4000
5000
6000
L
Ø48,3x3,2
576
Formwork Girders
Accessories
Note
Wrench size SW 19.
Wall Formwork
(9)
Item no. Weight kg
017020
1,120
SW 19
Note
Wrench size SW 19.
Column Formwork
1,400
( 9)
017030
Note
Wrench size SW 19.
Shoring Systems
SW 19
Note
Wrench size SW 19.
Climbing Systems
1,400
Working Platforms
(27)
017010
SW 19
1,540
Note
Wrench size SW 19.
Bridge- and
Tunnel Formwork
(26)
017000
0,850
Note
SW 30
( 12)
017040
SW 19
SW 19
577
Service
1,100
(27)
102400
Slab Formwork
SW 19
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
071204
700844
700845
700846
700843
727112
031040
031080
031030
727057
727056
727060
727061
727058
727059
103321
103323
745645
745319
745569
745570
745322
745323
745560
745560
745324
745324
745580
745321
745347
745346
103333
103274
103275
103311
740275
740324
745305
740279
740278
740277
740276
740276
740251
740323
745303
745300
740256
740287
740285
740284
740284
740286
740257
740257
740252
740252
740255
740255
745341
740322
745340
745345
745344
745343
745342
740770
578
Additional Cleaning Cost
Corner Profile TAE 90
Corner Profile TE 120
Corner Profile TE/TAE 270
Drill Bit Ø 20 mm
Drill Bit Ø 25 mm
Drill Bit Ø 35 mm
EFD Paint orange, 5 L
EFD Paint red, 1 L
EFD Paint white, 1 L
EFD Paint yellow, 1 L
Fin-Ply 18 mm TAE 120/135°, left
Fin-Ply 18 mm TAE 120/135°, right
Fin-Ply 18 mm TAE 90
Fin-Ply 18 mm TAE 90/2
Fin-Ply 18 mm TE 120, left
Fin-Ply 18 mm TE 120, right
Fin-Ply 18 mm TE 120/2, left
Fin-Ply 18 mm TE 120/2, right
Fin-Ply 18 mm TE 270, TAE 270
Fin-Ply 18 mm TE 270/2, TAE 270/2
Fin-Ply 18 mm TE 270/2, TAE 270/2
Fin-Ply 18 mm TE 60
Fin-Ply 18 mm TE 60/2
Fin-Ply 18 mm TE/4 330, left
Fin-Ply 18 mm TE/4 330, right
Fin-Ply 18 mm TEA 270/135°
Fin-Ply 18 mm TEI 120/135°, left
Fin-Ply 18 mm TEI 120/135°, right
Fin-Ply 18 mm TEI 270/135°
Fin-Ply 18 mm TR 120 x 120
Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120
Fin-Ply 18 mm TR 270 x 240, 2 Sheets
Fin-Ply 18 mm TR, THP 60 x 60
Fin-Ply 18 mm TR, TRA 270 x 30
Fin-Ply 18 mm TR, TRA, THP 270 x 60
Fin-Ply 18 mm TR/4 330 x 120
Fin-Ply 18 mm TR/4 330 x 24
Fin-Ply 18 mm TR/4 330 x 240, 2 Sheets
Fin-Ply 18 mm TRA 90 x 30
580
584
584
584
584
583
583
583
583
584
584
584
584
584
584
585
585
586
586
585
585
585
585
585
586
585
586
585
585
586
586
585
585
585
585
585
585
585
585
585
585
586
585
585
585
585
585
585
585
585
586
585
585
585
586
586
585
586
585
586
586
586
586
586
586
586
586
740273
740280
740280
740270
740270
740271
740271
745329
745348
745349
740309
740308
740310
071340
727165
750134
750135
030300
030320
083041
083042
083045
083044
083043
083046
083025
083030
083024
083029
083028
083027
083026
083015
083020
083014
083019
083018
083017
083016
083008
083013
083007
083009
083012
083011
083010
083037
083036
083035
083034
083023
083022
083021
083031
083033
083032
083040
083039
083038
083048
083047
083049
082041
082042
082045
082044
082043
Fin-Ply 18 mm TRM 120 x 72 l = 286 mm
Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm
Fin-Ply 18 mm TRM, TAM 270 x 72 l = 1481 mm
Fin-Ply 18 mm TRM, TAM 270/330 l = 513 mm
Fin-Ply 18 mm TRM, TRM/4 330 l = 998 mm
Fin-Ply 18 mm TRM/4 330 x 72 l = 383 mm
Fin-Ply 18 mm TRS 120 x 90
Formwork Repair i.e. Weldings
PACTAN Sealing, brown, 310 ccm
Plastic Sleeve Corner DW 20
Plastic Sleeve DW 20
Plug Ø 20/24 mm
Repair Service RG, TAM 270 x 72
Repair Service RG, TE 120
Repair Service RG, TR 120 x 120
Repair Service RG, TRA 270 x 30
Repair Service RG, TRM 120 x 72
Repair Service RG, TRS 120 x 90
Repair Service RK, TAM 270 x 72
Repair Service RK, TE 120
585
585
586
585
586
585
586
586
586
586
585
585
585
583
583
584
584
584
584
582
582
581
582
582
581
581
581
581
581
581
581
581
582
582
582
582
582
582
582
582
582
582
582
582
582
582
581
581
581
581
582
582
582
582
582
582
581
582
582
582
582
582
581
581
580
580
580
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
581
581
581
581
581
581
580
580
580
581
581
581
583
583
580
583
583
584
584
584
584
Repair Service RK, TR 120 x 120
Repair Service RK, TRA 270 x 30
Repair Service RK, TRM 120 x 72
Repair Service RK, TRS 120 x 90
RS Cleaning Service TRIO
Sealing Hole Ø 40 mm in Surface
Sleeve 18 -DW 20, Base Piece
Sleeve 18 -DW 20, Head Piece
Spring 4,6 x 18 x 1338 mm
579
Service
082046
082025
082030
082024
082029
082028
082027
082026
082015
082020
082014
082019
082018
082017
082016
082008
082013
082007
082012
082011
082010
082009
082037
082036
082035
082034
082023
082022
082021
082031
082033
082032
082040
082039
082038
082048
082047
082049
730050
044890
071202
071217
071216
750132
750133
750040
750303
Formwork Girders
Item no. Weight kg
071202
071204
0,000
0,000
082034
082035
082036
082037
082046
0,000
0,000
0,000
0,000
0,000
082024
082025
082026
082027
082028
082029
082030
082040
082045
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
082014
082015
082016
082017
082018
082019
082020
082039
082044
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
082007
082008
082009
082010
082011
082012
082013
082038
082043
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
580
Reinigungsservice RS
Cleaning of TRIO Panel Formwork.
Repair Service RK Small, TRIO Steel 0.60 m
Includes Cleaning Service RS and fitting of new
plywood sheets.
plywood sheets.
plywood sheets.
plywood sheets.
Formwork Girders
Item no. Weight kg
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
Wall Formwork
083024
083025
083026
083027
083028
083029
083030
083040
083045
Column Formwork
0,000
0,000
0,000
0,000
0,000
Slab Formwork
083034
083035
083036
083037
083046
Repair Service RK Small, TRIO Column
plywood sheets.
Shoring Systems
0,000
0,000
0,000
Repair Service RG Large, TRIO Steel 0.60 m
Includes Repair Service RK Small and refurbishment of frames.
Climbing Systems
082047
082048
082049
Repair Service RK Small, TRIO Alu 2.70 m
plywood sheets.
Working Platforms
0,000
0,000
0,000
0,000
Bridge- and
Tunnel Formwork
082021
082022
082023
082041
Repair Service RK Small, TRIO Alu 0.90 m
plywood sheets.
0,000
0,000
0,000
0,000
581
Service
082031
082032
082033
082042
Formwork Girders
Item no. Weight kg
083014
083015
083016
083017
083018
083019
083020
083044
083039
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
083007
083008
083010
083011
083012
083009
083013
083038
083043
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
0,000
083031
083032
083033
083042
0,000
0,000
0,000
0,000
083021
083022
083023
083041
0,000
0,000
0,000
0,000
083047
083048
083049
0,000
0,000
0,000
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
582
Repair Service RG Large, TRIO Alu 0.90 m
Repair Service RG Large, TRIO Alu 2.70 m
Repair Service RG Large, TRIO Column
Formwork Girders
071216
071217
0,000
0,000
Sealing Holes in Surface
Repair of plywood sheets.
071340
0,000
031040
031080
031030
0,040
0,055
0,090
Drill
Drill
Drill
Drill
Wall Formwork
Item no. Weight kg
Column Formwork
Bits
Bit Ø 20 mm
Bit Ø 25 mm
Bit Ø 35 mm
044890
2,120
Slab Formwork
.
Climbing Systems
0,010
Working Platforms
727112
Shoring Systems
.
730050
0,004
Bridge- and
Tunnel Formwork
.
29
0,430
583
Service
727165
Ø5
Formwork Girders
Wall Formwork
Column Formwork
Item no. Weight kg
750135
750134
750133
750132
750040
0,031
0,030
0,005
0,005
0,070
Accessories TRIO
727056
727057
727058
727059
727060
727061
1,200
1,180
1,200
1,180
1,200
1,180
EFD
EFD
EFD
EFD
EFD
EFD
EFD
700843
700845
700846
700844
4,090
1,800
0,890
1,340
Corner
Corner
Corner
Corner
Corner
750303
0,022
Paints
Paint red, 1 L
Paint orange, 5 L
Paint yellow, 1 L
Paint yellow, 5 L
Paint white, 1 L
Paint white, 5 L
Profiles, painted
Profile TE/TAE 270
Profile TE 120
Profile TE 60
Profile TAE 90
25
22
Climbing Systems
Shoring Systems
Slab Formwork
0,003
Plug Ø 20/24 mm
not required.
17
20
030320
0,004
For closing unused tie holes Ø 25 mm and with
TRIO column formwork.
Service
584
23
21
25
Note
Ø 29
030300
Bridge- and
Tunnel Formwork
Working Platforms
56
Item no. Weight kg
Note
Cross-bonded birch veneers. Coated with 220 g/m²
reinforced phenolic resin on both sides.
Spare Plywood TRIO Steel 0.60 m
Fin-Ply 18 mm TE 60
Note
35,400
17,400
13,100
10,400
8,600
4,190
3,130
4,000
4,000
3,860
3,860
6,490
2,510
2,340
2,340
3,940
3,940
Spare Plywood TRIO 1.20 m
Note
80,800
80,800
39,600
29,500
23,400
19,400
9,230
7,210
9,100
8,750
13,000
3,630
5,300
8,950
Spare Plywood TRIO Steel 2.70 m
Fin-Ply 18 mm TE 270/2, TAE 270/2
Note
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
745303
745300
740251
740252
740256
740255
740257
740323
745560
745324
740270
740271
103311
103333
Working Platforms
745305
740275
740276
740277
740278
740279
740324
745570
745569
745323
745322
740280
740273
103274
103275
103321
103323
Bridge- and
Tunnel Formwork
6,290
4,990
4,120
1,940
2,000
1,900
740284
740285
740286
740287
745580
745321
585
Service
29,100
13,000
6,210
Wall Formwork
Spare Plywood for TRIO Column
Replacement plywood formliner for Column Panel
TRS.
740308
740309
740310
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Item no. Weight kg
745340
745341
745342
745343
745344
745345
740322
745346
745347
745348
745349
745329
98,990
49,100
36,600
28,700
24,100
11,600
9,020
10,800
10,800
3,500
4,520
8,910
Spare Plywood TRIO 3.30 m
Fin-Ply 18 mm TR/4 330 x 120
Note
740276
740284
740770
745645
745319
740280
13,100
6,290
2,980
2,380
2,880
6,490
Spare Plywood TRIO Alu 0.90 m
Note
740252
740255
740257
745560
745324
740270
740271
29,500
19,400
9,230
9,100
8,750
13,000
3,630
Spare Plywood TRIO Alu 2.70 m
Fin-Ply 18 mm TE 270/2, TAE 270/2
Note
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
586
Service
587
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
588
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
590
590
590
590
590
590
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
590
590
590
590
Cleaning Plywood and Frame DOMINO
Drill Bit HSS DIN 338, Ø 5.1 mm
Drill Bit Ø 20 mm
Drill Bit Ø 25 mm
Drill Bit Ø 35 mm
Fin-Ply 15 mm D 125 x 100
Fin-Ply 15 mm DM 125 x 75
589
Service
071204
071200
727112
031040
031080
031030
740458
740526
740461
740525
740524
740523
740460
740459
740454
740522
740457
740499
740498
740497
740456
740455
740462
740531
740465
740529
740528
740527
740464
740463
740468
740467
740469
727165
730050
044890
071217
071216
Formwork Girders
Item no. Weight kg
071200
071204
0,000
0,000
Cleaning Service RS
Cleaning of DOMINO Panel Formwork.
071216
071217
0,000
0,000
Sealing Holes in Surface
031040
031080
031030
0,040
0,055
0,090
Drill
Drill
Drill
Drill
Bit
Bit Ø 20 mm
Bit Ø 25 mm
Bit Ø 35 mm
.
044890
2,120
.
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
727112
0,010
Service
Bridge- and
Tunnel Formwork
.
730050
0,004
29
Ø5
590
Formwork Girders
740462
740463
740464
740527
740528
740529
740465
740531
740469
7,710
5,770
3,830
3,000
2,610
2,230
1,890
1,450
5,320
Spare Plywood DOMINO 0.75 m
Note
740458
740459
740460
740461
740523
740524
740525
740526
740468
12,900
9,670
6,390
3,150
5,040
4,390
3,740
2,440
9,190
Note
740454
740455
740456
740457
740497
740498
740499
740522
740467
25,800
19,300
12,800
6,250
10,100
8,800
7,500
4,890
18,800
Note
591
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Item no. Weight kg
727165
0,430
Wall Formwork
Service
592
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
594
595
595
595
595
595
595
595
594
595
594
594
594
594
594
594
595
594
594
594
594
Fin-Ply 9 mm SDP 150 x 37,5
Fin-Ply 9 mm SDP 150 x 50
Repair Service RK, SDP 150 x 37,5
Repair Service RK, SDP 150 x 50
RS Cleaning Service SKYDECK
593
Service
071204
727112
052810
052816
052090
052815
052818
052130
071340
727165
082003
082002
082001
082006
082005
082004
780305
044890
071209
071217
071216
Item no. Weight kg
Cleaning Service RS
Cleaning of SKYDECK Slab Formwork.
071209
071204
0,000
0,000
082001
082002
082003
082004
082005
082006
0,000
0,000
0,000
0,000
0,000
0,000
071216
071217
0,000
0,000
Sealing Holes
071340
0,000
044890
2,120
Repair Service RK
plywood sheets.
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
Bridge- and
Tunnel Formwork
.
594
Formwork Girders
Column Formwork
0,005
20
6,850
4,520
3,350
3,390
2,240
1,660
Spare Plywood SKYENCK
Spare Plywood for SKYDECK.
Note
Climbing Systems
052090
052816
052810
052130
052818
052815
Working Platforms
Bridge- and
Tunnel Formwork
0,430
727165
Slab Formwork
Ø5
Shoring Systems
780305
Wall Formwork
.
595
Service
Item no. Weight kg
727112
0,010
Service
596
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Technical Planning
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
598
598
598
598
598
598
598
598
598
598
598
598
598
Assembly on Site
Design Calculation
Design Work and Technical Advice
Design Work incl. Cycle Plans, Parts List
Shop Drawings for ASG 160, FB 180
Shop Drawings for KG, CB, SKS
Shop Drawings for MULTIFLEX
Shop Drawings for MX, TRIO, DO, HS
Shop Drawings for SKYDECK
Shop Drawings for Slab Tables
Shop Drawings for Special Forms
Structural Calculation for Approval
Supervisor
597
Service
071271
071290
071350
071362
071358
071359
071356
071351
071355
071357
071361
071291
071364
Item no. Weight kg
071351
071352
071353
071354
0,000
0,000
0,000
0,000
071355
071356
071357
0,000
0,000
0,000
071358
071359
0,000
0,000
071361
071362
0,000
0,000
071290
071291
071350
071271
0,000
0,000
0,000
0,000
071364
0,000
Service
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Technical Planning
598
Shop Drawings for Wall Formworks
Shop Drawings for VARIO, RUNDFLEX
Allowance For Single Sided Applicat.
Allowance for Double Sided Applicat.
Technical processing, formwork planning and
project development.
Shop Drawings for Slab Formworks
Shop Drawings for SKYENCK
Technical processing, formwork planning and project development.
Shop Drawings for Climbing-, Platform Sys.
Shop Drawings for FB 180
Shop Drawings for RCS, CB, SKS
Design Calculations, Technical Planning
Design Calculation
Assembly on Site
Supervisor
Assembly work plus travel costs, expenses and
overnight accommodation.
Service
599
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
050070
050190
050080
050040
052590
050000
050200
050030
052380
523
523
523
523
523
523
523
523
523
114811
114825
114812
030663
030664
045200
071204
071204
071204
010350
104305
100411
100411
100242
100242
100159
051110
021240
021250
021610
021620
022400
051130
113933
029270
029270
023940
023500
023500
023500
023500
066080
027212
027212
027212
027212
027212
079300
079360
079420
079480
079540
079600
103606
103606
103606
103606
103606
103606
065073
065073
065073
026636
026636
027480
029280
029280
Anchor Loop
Anchor Loop
467
467
467
222
222
292
580
590
594
133
460
374
460
374
460
460
425
167
167
161
161
153
424
499
435
408
161
27
61
161
266
104
199
438
410
418
553
354
354
354
354
354
354
87
208
251
297
273
289
314
307
575
409
416
195
435
408
600
029390
026440
026420
026420
026420
026420
026460
026280
026230
026230
026230
026230
102111
108360
027650
027530
109017
113847
112387
112464
123478
111283
107607
107600
107608
107601
052839
023301
023201
066047
066029
066067
034230
034200
034210
111850
111872
114607
113246
113203
114583
023200
054414
023300
103054
013220
013210
013230
115375
115375
021150
021140
021130
021120
021110
027930
027930
071271
028720
065075
065072
065071
065070
Anchor Positioning Stud M36, galv.
Anchor Sleeve DW 15
Anchor Sleeve M24
Anchor Sleeve M24
Anchor Sleeve M24
Anchor Sleeve M24
Anchors MX 15-25
Anchors MX 20-30
Anchors MX 30-40
Angle Bracket 90°
Angle TRH 180 x 15
Angle TRH 180 x 6
Angle TRH 270 x 15
Angle TRH 270 x 6
Assembly on Site
AW Bracket
AW Clamp 8-10
AW Handrail Post
199
215
435
408
417
515
199
215
406
417
441
514
514
514
195
196
195
33
33
33
576
497
84
84
84
84
523
61
60
100
96
103
116
113
119
23
19
14
23
19
14
48
42
53
141
140
140
140
216
503
166
166
166
166
166
324
553
598
338
344
343
343
343
102210
022019
100870
Base Adapter HD
Base Beam UVA 250
337
388
475
601
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
406
417
427
442
558
558
558
198
558
558
558
137
558
137
137
558
558
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
559
560
559
199
559
322
565
405
208
565
208
566
107
64
181
566
174
256
566
245
284
568
568
256
142
353
354
499
567
566
567
567
Shoring Systems
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 80-10.9, galv.
Bolt ISO 4014 M30 x 130-10.9, galv.
Bolt ISO 4014 M36 x 130-10.9, galv.
Bolt ISO 4014 M36 x 130-10.9, galv.
Bolt ISO 4014 M8 x 100-8.8, galv.
Bolt ISO 4014 M8 x 140-8.8, galv.
Bolt ISO 4014 M8 x 150-8.8, galv.
Bolt ISO 4014 M8 x 150-8.8, galv.
Bolt ISO 4014 M8 x 180-8.8, galv.
Bolt ISO 4014 M8 x 190-8.8, galv.
Bolt ISO 4014 M8 x 190-8.8, galv.
Bolt ISO 4017 M12 x 140-8.8, galv.
Bolt ISO 4017 M12 x 240-8.8, galv.
Bolt ISO 4017 M12 x 25-8.8, galv.
Bolt ISO 4017 M12 x 30-8.8, galv.
Bolt ISO 4017 M12 x 40-8.8, galv.
Bolt ISO 4017 M16 x 30-8.8, galv.
Bolt ISO 4017 M16 x 45-8.8, galv.
Bolt ISO 4017 M16 x 50-8.8, galv.
Bolt ISO 4017 M20 x 100-8.8, galv.
Bolt ISO 4017 M20 x 40-8,8, galv.
Bolt ISO 4017 M20 x 50-8.8, galv.
Bolt ISO 4017 M24 x 50-10.9, galv.
Bolt ISO 4017 M30 x 70-8.8, galv.
Bolt ISO 4017 M36 x 70-8.8, galv.
Bolt ISO 4017 M36 x 70-8.8, galv.
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Climbing Systems
026430
026430
026430
026430
026430
026220
029540
029550
029550
710285
722859
104929
104929
107185
103518
103518
710284
070100
018330
027340
035440
018320
018350
103740
780353
110598
110599
710266
102120
710224
710231
710225
710252
114727
706458
780357
026290
029420
029430
029430
027990
027990
715357
027170
027170
018050
018050
027690
027690
027690
027690
105822
105400
105400
037160
037160
037160
113012
724500
104031
104031
104031
104031
104031
107579
026200
105435
Working Platforms
350
202
315
307
390
255
374
461
204
187
203
176
251
279
297
272
261
289
87
72
377
461
366
574
344
440
547
138
546
138
546
490
468
468
560
558
558
558
558
558
457
558
558
558
558
558
558
558
558
558
558
558
558
187
558
558
558
558
558
558
558
433
407
558
558
558
558
Bridge- and
Tunnel Formwork
Base MP 50
Base Plate HD
Base Plate UJP
Base Plate UJP
Base Spindle TRH
Base Spindle TRH
Bearing Box BR
Bit Point TX 30
Bit Point TX 30
Bolt EN 14399-4 M12 x 140-10.9
Bolt ISO 4014 M10 x 100-8.8, galv.
Bolt ISO 4014 M10 x 50-8.8, galv.
Bolt ISO 4014 M10 x 80-8.8, galv.
Bolt ISO 4014 M12 x 100-8.8, galv.
Bolt ISO 4014 M12 x 60-8.8, galv.
Bolt ISO 4014 M12 x 70-8.8, galv.
Bolt ISO 4014 M12 x 70-8.8, galv.
Bolt ISO 4014 M12 x 80-8.8, galv.
Bolt ISO 4014 M16 x 100-8.8, galv.
Bolt ISO 4014 M16 x 110-8.8, galv.
Bolt ISO 4014 M16 x 120-8.8, galv.
Bolt ISO 4014 M16 x 130-8.8, galv.
Bolt ISO 4014 M16 x 140-8.8, galv.
Bolt ISO 4014 M16 x 160-8.8, galv.
Bolt ISO 4014 M16 x 60-8.8, galv.
Bolt ISO 4014 M16 x 70-8.8, galv.
Bolt ISO 4014 M16 x 80-8.8, galv.
Bolt ISO 4014 M16 x 90-8.8, galv.
Bolt ISO 4014 M20 x 100-8.8, galv.
Bolt ISO 4014 M20 x 100-8.8, galv.
Bolt ISO 4014 M20 x 120-8.8, galv.
Bolt ISO 4014 M20 x 130-8.8, galv.
Bolt ISO 4014 M20 x 160-8.8, galv.
Bolt ISO 4014 M20 x 200-8.8, galv.
Bolt ISO 4014 M20 x 80-8.8, galv.
Bolt ISO 4014 M20 x 90-8.8, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 130-8.8, galv.
Bolt ISO 4014 M24 x 200-8.8, galv.
Bolt ISO 4014 M24 x 220-10.9, galv.
027310
028100
028100
028100
022024
037550
100244
100244
102018
102018
106000
106000
106000
106000
106000
106000
106000
106000
106126
106126
100014
100014
019900
018310
028790
108162
024921
072220
072220
072140
072140
101596
101591
101588
061230
710242
721817
710593
750330
710221
720610
720610
710220
710219
710233
105402
710232
722169
780155
710299
714093
710222
721729
024910
024910
104477
711078
781054
706462
024900
710226
029560
029560
029560
109612
113686
106797
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
715585
113247
113247
111567
111567
113255
113255
112919
027790
027940
027940
066082
066082
022016
022016
034550
034550
108213
037530
037530
037530
023660
023660
023660
023660
037190
037190
106663
106662
030060
027500
027510
025700
025690
025710
025720
106661
107546
054511
054512
054510
114997
114997
054528
054529
105845
100401
034570
052621
013240
034540
115640
023640
023640
070030
065023
065024
065022
Bolt Ø 26 x 120
Bolt Ø 26 x 120
Bottom Frame SRU/UZ
Brace Clamp, galv.
Brace Clamp, galv.
Brace Connector DRA
Brace Connector DRA
Brace Connector HDR
Brace Connector HDR
Brace Connector QR
Brace Connector QR
Brace Connector QR
Brace Frame SB 1
Brace Frame SB 2
Brace Frame SB-A
Brace Frame SB-A0
Brace Frame SB-B
Brace Frame SB-C
Bracing TRP 120
Bracing TRP 240
Bracket ASG 70-100
Bracket HSK 60
Bulkhead Tie
Butt Strap 54/30 mm
568
569
568
499
567
32
182
333
324
323
362
106
207
208
388
122
207
356
207
256
277
29
63
207
266
207
246
197
196
189
183
184
180
180
181
181
196
71
71
71
71
216
502
71
71
414
472
123
522
142
120
29
28
62
576
531
531
531
105905
030130
030130
051020
101858
101860
108870
101854
Carriage CB 240
Central cross 170
174
214
120
422
488
489
416
337
602
102251
105328
022025
022013
054240
054240
111975
037600
037610
105448
037590
037210
031200
031200
031200
052624
052622
045211
045010
045011
045012
045013
045020
045021
045022
045023
045030
045031
045032
045033
045040
045041
045042
045043
045050
045051
045052
045053
045060
045061
045062
045063
045210
110556
030790
112815
115145
028660
028670
028890
071200
051100
051000
031220
030940
111382
109743
111833
113744
111390
114166
109469
109470
109471
109472
109610
105907
Central cross 200
Clamp GFK
Clamp Lock
337
549
392
388
266
574
277
255
255
255
255
245
143
283
573
522
522
293
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
292
293
314
575
562
562
322
322
322
590
423
422
434
197
496
495
495
496
496
495
495
495
495
495
495
418
603
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
471
471
470
471
59
60
140
140
140
402
70
317
70
584
584
584
584
238
238
238
238
238
238
238
238
238
238
238
238
238
238
238
238
176
147
286
176
147
286
153
61
60
60
142
208
256
323
355
353
405
500
569
167
500
569
569
569
214
192
220
221
497
497
483
483
483
483
Shoring Systems
Corner Alu TAE 90/2
Corner Frame FBE
Corner Handrail TRP
Corner Platform TRP
Corner Spindle RKR
Cotter Pin 7, galv.
Cotter Pin 8, galv.
Climbing Systems
100149
100235
100711
100224
023891
023971
013130
013140
013180
026626
107021
111379
107009
700844
700845
700846
700843
065100
065101
065102
065103
065109
065107
065108
065106
065115
065112
065113
065114
065121
065118
065119
065120
027070
027070
027070
027060
027060
027060
022410
022661
022581
054375
018060
018060
018060
018060
018060
018060
018060
018060
018060
022230
022230
022230
710304
710618
030140
030830
030830
030420
114082
114084
100416
100419
100422
100425
Working Platforms
120
244
244
244
276
276
276
264
264
264
265
282
282
302
105
120
61
499
187
499
353
389
389
401
233
552
218
247
268
257
278
278
278
31
66
246
268
257
218
407
417
442
514
515
218
35
90
232
552
523
473
150
205
389
353
352
185
106
64
32
182
107
64
32
333
369
425
Bridge- and
Tunnel Formwork
Clip HSC, galv.
Combihead SCK
Compression Head HD
Concrete Cone Gauge
Concrete Cone Gauge
Concreting Landing
Concreting Landing
Concreting Landing
Cone DR 22
Cone FZR 22
Cone MX DR 22
Cone Spanner TRH
Cone Spanner TRH
Cone Spanner TRH
Connector MP-SRU
Connector MPV-2
Connector SRU/UZ
Connector TRIO-CB
034500
037260
037250
037270
111957
111683
111964
054210
054200
054220
054230
012040
012090
061180
066084
034510
023550
024000
024180
024180
107161
022023
022022
026627
101995
101995
031260
037410
037410
037410
115894
115896
115895
022950
022950
037400
037400
037400
065033
026240
026240
026240
026240
116233
031390
113018
110634
110634
110634
052800
100583
100541
028080
028080
107160
027301
027680
027680
027680
027680
025740
025740
025740
025740
112920
019810
051090
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
100428
100581
100580
024220
107348
030400
022020
013010
061026
061038
061024
061027
021980
021980
021990
021990
723910
105401
051010
111238
037440
037440
037440
034520
037320
070760
070760
065068
065068
065016
065016
019950
019950
018300
018300
010180
010270
010190
028680
027890
106989
065130
026417
026417
026417
026417
026417
026417
026417
030050
030050
030050
030050
030050
030050
030050
030050
030800
030800
030800
030500
030500
030500
031320
Coupling MPB 24
Coupling VKZ 99
Cover Strip SAL 150
Cover Strip SAL 50
Cover Strip SAL 75
Crane Eye 24, left
Crane Eye 24, left
Crane Eye 24, right
Crane Eye 24, right
Crane Eye A18
Crane Eye BR 2,5 t
Crane Eye CB 240
Crane Hook HSKA
Crane Splice GT 24
Crane Splice GT 24
Cross Strap, galv.
Cross Strap, galv.
Cutting Cost ASP
Cutting Cost Tie Rod DW 20/B 20
483
474
474
143
354
193
386
139
301
301
301
301
146
163
163
146
174
439
423
146
248
269
258
124
246
146
162
485
536
485
536
375
367
368
376
134
134
134
322
322
362
240
188
176
370
394
430
480
576
212
188
212
434
441
405
434
527
190
219
219
193
221
198
218
101349
101350
102605
101394
101378
101379
101381
101360
101372
101373
101375
101576
100039
100076
100079
100082
100085
100031
072240
024923
071290
071350
071362
019940
021630
031641
031642
031643
031643
031635
031636
031637
031638
031655
031655
031644
031644
027520
022011
017030
017030
018280
018280
018280
022380
022440
727112
727112
727112
727112
031040
031040
031040
031080
031080
031080
031030
031030
031030
031100
031120
102390
061210
065017
Deck Link Plate UED
Design Calculation
Distribution Waler
DK Cone DW 15/35
DK Cone DW 15/55
DK Cone DW 20/55
DK Cone DW 26/55
DK Cone Remover UNI
DK Cone Remover UNI
Drill Bit Ø 20 mm
Drill Bit Ø 20 mm
Drill Bit Ø 20 mm
Drill Bit Ø 25 mm
Drill Bit Ø 25 mm
Drill Bit Ø 25 mm
Drill Bit Ø 35 mm
Drill Bit Ø 35 mm
Drill Bit Ø 35 mm
Drill Bit Ø 40 mm
Drill Bit Ø 50 mm
Drophead SFK
486
486
467
468
468
468
468
468
468
468
468
475
463
463
463
463
463
463
546
547
598
598
598
366
162
227
227
227
230
226
226
226
226
232
551
232
552
189
392
481
577
240
325
564
152
152
555
583
595
590
554
583
590
554
583
590
554
583
590
554
554
223
302
530
101347
101348
486
486
061045
061046
Edge Beam SRT-2 150
Edge Beam SRT-2 75
301
301
604
605
Formwork Girders
432
565
136
432
565
432
565
565
565
565
565
565
419
565
565
136
565
565
513
565
432
117
117
114
114
120
120
312
312
312
115
113
118
116
114
119
54
49
44
55
50
44
101
97
117
114
119
55
50
44
Wall Formwork
Column Formwork
051650
051650
710240
710240
710240
024360
024360
725462
024380
024390
024410
710295
710326
710326
710709
024140
024140
723439
750076
750076
108834
034370
034470
034320
034480
034330
034460
110040
110486
110646
034280
034130
034140
034290
034170
034180
023270
023170
054384
101823
101813
101829
066053
066033
034390
034400
034410
023450
023460
054430
Slab Formwork
72
294
139
546
338
315
541
145
162
135
494
88
333
149
216
502
Shoring Systems
Extension GF 10
Extension GF 10
Eye Nut RCS DW 15
Eye Nut RCS DW 15
Climbing Systems
054517
103417
072160
072160
104050
111392
111392
024480
024480
104027
104027
108995
112918
103992
115378
115378
Working Platforms
449
449
584
584
584
584
584
584
138
546
20
20
21
21
20
20
15
15
16
16
16
15
27
10
10
10
12
11
11
11
23
24
24
24
24
25
26
26
25
369
402
432
529
73
470
470
451
451
451
470
470
470
248
294
270
259
287
393
133
149
449
449
304
369
305
325
553
Bridge- and
Tunnel Formwork
Edge Profile UH 100
Edge Profile UH 125
EFD Paint red, 1 L
Element MX 120 x 30
Element MX 120 x 45
Element MX 120 x 60
Element MX 120 x 90
Element MX 270 x 30
Element MX 270 x 45
Element MX 270 x 60
Element MX 270 x 90
Element MX 30 x 240
Element MX 330 x 30
Element MX 330 x 45
Element MX 330 x 60
Element MX 330 x 90
Element MX 90 x 240
Element MX 90 x 30
Element MX 90 x 45
Element MX 90 x 60
Element MX 90 x 90
Elements MX 60 x 30
Elements MX 60 x 45
Elements MX 60 x 60
End Plate SRZ
End Platform VARIO
End Step UAE 100
End Step UAE 125
End Support SSL
114349
114621
727057
727056
727060
727061
727058
727059
072150
072150
112143
112104
112239
112232
112221
112152
112022
112006
112090
112078
112200
112045
112133
114248
114426
116454
114457
114452
114445
114258
112115
112271
112265
112259
112252
112126
112292
112286
112280
019930
065066
065066
065066
054519
101799
104618
108536
107178
108544
100349
101579
100444
103724
103724
103724
103724
103724
103724
710001
103932
109208
114180
061023
019920
061300
070740
070740
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
061049
061036
052150
052159
740458
740526
740461
740525
740524
740523
740460
740459
740454
740522
740457
740499
740498
740497
740456
740455
740462
740531
740465
740529
740528
740527
740464
740463
740468
740467
740469
052240
103321
103323
745645
745319
745569
745570
745322
745323
745560
745560
745324
745324
745580
745321
103333
745347
745346
103274
103275
103311
740275
740324
745305
740279
740278
740277
740276
740276
740251
740323
745303
745300
740256
740287
740285
606
Fin-Ply 12 mm 1500 x 3000 mm
Fin-Ply 15 mm 1500 x 3000 mm
Fin-Ply 18 mm 1500 x 3000 mm
Fin-Ply 18 mm TE 270/2, TAE 270/2
Fin-Ply 18 mm TE 270/2, TAE 270/2
Fin-Ply 18 mm TE 60
Fin-Ply 18 mm TE 270/135°
303
303
520
520
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
520
585
585
586
586
585
585
585
585
585
586
585
586
585
585
585
586
586
585
585
585
585
585
585
585
585
585
586
585
585
585
585
585
585
585
585
740284
740284
740286
740257
740257
740252
740252
740255
740255
745341
740322
745340
745345
745344
745343
745342
740770
740273
740280
740280
740270
740270
740271
740271
745329
745348
745349
740309
740308
740310
052260
052060
052270
052460
052095
052810
052816
052090
052815
052818
052130
052829
052823
051230
026631
026625
052828
024630
710340
020330
026652
026649
026648
031090
065062
030260
030260
101706
101706
071340
071340
023800
066090
034680
023010
028340
028380
Fin-Ply 18 mm TR/4 330 x 120
Fin-Ply 18 mm TRM, TAM 270 x 72
Fin-Ply 18 mm TRM, TAM 270/330
Fin-Ply 21 mm 1250 x 2500 mm
Fin-Ply 21 mm 1500 x 2500 mm
Fin-Ply 21 mm 1500 x 3000 mm
Fin-Ply 30 mm 1250 x 3610 mm
Formwork Bracket-2
Frame MRK 120
Frame MRK 137,5
586
585
585
585
586
586
585
586
585
586
586
586
586
586
586
586
586
585
585
586
585
586
585
586
586
586
586
585
585
585
520
520
520
520
520
595
595
595
595
595
595
520
520
427
401
400
523
136
486
440
400
399
398
554
526
143
574
143
574
583
594
67
107
123
66
348
348
607
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
453
454
454
453
453
136
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
144
206
284
144
206
284
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
512
506
506
515
509
512
506
506
513
513
507
507
507
508
508
508
512
516
508
508
513
509
510
511
232
232
231
439
168
Shoring Systems
GKB Work Cage
Glue Component A-2
Glue Component B-2
Climbing Systems
107981
107986
107977
108010
108011
024600
075100
075100
075120
075120
075150
075150
075180
075180
075210
075210
075240
075240
075270
075270
075300
075300
075330
075330
075360
075360
075390
075390
075420
075420
075450
075450
075480
075480
075510
075510
075540
075540
075570
075570
075600
075600
028050
028050
028050
028070
028070
028070
074990
074990
074905
074905
074910
074910
074890
074890
074920
074920
074950
074950
074930
074930
074940
074940
074960
074960
074970
074970
074980
074980
102217
102220
102219
102394
102195
102327
102185
102184
102396
102395
102187
102186
102188
102778
102779
102329
102822
102317
102193
102190
102328
102196
102197
104181
108958
110345
108136
020600
021270
Working Platforms
348
349
349
349
349
349
349
349
348
348
348
483
542
483
542
256
325
574
240
240
240
172
175
172
175
177
177
173
173
177
177
173
173
175
Bridge- and
Tunnel Formwork
Frame MRK 150
Frame MRK 180
Frame MRK 201,5
Frame MRK 225
Frame MRK 230
Frame MRK 237
Frame MRK 266
Frame MRK 296
Frame MRK 62,5
Frame MRK 75
Frame MRK 90
Framing Clip, galv.
Framing Clip, galv.
FTF 500 Bracket
FTF Assembly Device
FTF Clamp
FTF Spindle Guide
028350
113799
028460
028360
028470
028480
028490
028370
028390
028400
028330
100660
100660
100678
100678
037540
018290
018290
065124
065125
065126
103981
104195
103949
104744
104018
103946
103945
104070
103942
104017
103944
104083
104803
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
021280
021290
051160
108387
108218
104412
026635
108214
103865
109010
110326
035700
035700
035700
101290
061250
104131
104131
037430
037430
037430
037430
037420
037420
037420
026628
114299
106877
101592
101592
034580
034580
034580
034580
034580
034580
034580
114328
108053
061260
061260
061260
054475
106147
106148
100265
100266
100267
100268
100810
025750
Guardrail Filler
Guardrail GF 100
Guardrail Holder
Guardrail Holder
Guardrail Holder
Guardrail Post FBP
Guardrail Post GKB
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post SGP
Guardrail Post SGP
Guardrail Post SGP
Guardrail Post TRH
Guardrail TRH 180
Guardrail TRH 270
Guardrail UPG 150
Guardrail UPG 200
Guardrail UPG 250
Guardrail UPG 300
Guardrail UPG 400
168
168
430
456
456
474
403
456
149
530
313
325
334
529
334
306
335
356
247
293
269
258
247
269
258
402
517
105
66
89
105
123
89
151
390
415
529
501
530
306
334
356
85
85
85
475
475
475
475
475
183
021260
100863
100863
051210
051190
051220
112159
025660
025660
025670
025670
110608
111291
022007
109563
Handle Lock UJS
Handle Lock UJS
Head Spindle HDK45
167
377
461
429
429
429
148
484
536
484
536
437
315
387
377
608
019790
019790
116081
116081
019780
019780
101774
101776
101776
101778
101779
109726
109785
111035
101773
051030
101916
100719
100719
030980
030980
030970
030970
030090
030090
030070
030070
030070
030070
030550
030590
030590
030580
030580
065020
065021
065018
065019
065025
100452
021160
027590
027590
024070
024070
024070
024080
024080
024880
104930
104096
104931
111806
103845
023650
023650
023650
023820
023820
100042
100042
107815
107815
100047
100047
106931
106931
375
367
367
375
374
368
497
187
497
497
497
497
497
497
497
425
393
379
483
194
221
194
221
213
189
213
441
405
503
213
191
219
191
220
531
531
531
531
531
490
167
184
145
136
282
440
136
440
575
137
137
137
500
137
63
89
28
63
28
382
466
382
466
382
466
382
466
609
Formwork Girders
204
248
294
269
258
286
393
436
350
436
72
152
436
248
294
270
259
286
394
436
394
259
249
295
287
249
295
270
259
287
393
437
249
295
271
260
287
394
437
249
295
271
260
Wall Formwork
Kicker AV
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 220/6
Ladder 240-360
Ladder 240-360
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Column Formwork
028110
051410
051410
051410
051410
051410
051410
051410
107173
051420
107738
107738
109105
051460
051460
051460
051460
051460
051460
051460
104646
103391
103369
103374
111165
103718
103718
103718
103718
103718
103718
103718
051450
051450
051450
051450
051450
051450
051450
104132
104132
104132
104132
Slab Formwork
383
369
383
383
383
383
383
383
383
553
265
116
113
119
22
21
17
17
13
12
26
26
25
25
53
47
57
42
82
77
159
159
159
159
159
159
157
157
157
157
157
157
160
160
160
160
431
399
332
54
47
134
250
279
296
272
261
288
205
250
279
296
272
261
289
205
251
297
272
261
289
86
71
231
231
231
Shoring Systems
Insert Socket SW 19
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker TRH 135
Kicker TRP
Climbing Systems
106092
106092
106880
107002
108380
108540
108689
104029
105925
027200
103721
034220
034150
034160
115299
112689
115255
112419
115338
114470
115315
112726
115307
112715
022660
022580
022840
054374
108842
108830
021930
021950
021430
021970
021910
102853
021830
102855
021850
021410
021890
021810
020830
020850
020870
020890
051630
026622
112921
103284
103317
010200
028110
028110
028110
028110
028110
028110
108135
108135
108135
108135
108135
108135
108135
028120
028120
028120
028120
028120
028120
108225
054518
031652
031653
031654
Working Platforms
382
466
382
466
382
466
382
466
382
466
382
466
Bridge- and
Tunnel Formwork
104356
104356
100049
100049
100051
100051
123483
123483
102617
102617
100053
100053
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
104132
104132
104132
108566
108568
103607
029440
029440
029440
051640
051640
024490
024500
024510
024520
024270
024270
024260
024260
108000
108172
108179
108034
108412
108190
101671
108191
107793
106608
106608
101656
101657
101658
101659
100330
100336
100339
100185
100183
100852
031631
031632
031633
114928
114818
114821
114912
114820
114916
114819
114920
114892
114924
114932
114936
115513
115157
115156
100055
100055
102846
102846
100057
100057
107867
107867
100059
610
Ladder TRH 264
Ladder TRH 354
Ladder UEL w. Hook
Landing TRP
287
394
437
85
85
468
199
435
562
431
562
562
562
562
562
138
562
138
562
452
452
452
453
454
453
446
452
73
86
72
487
487
487
487
487
487
487
487
487
487
190
192
194
382
382
382
382
382
382
382
382
382
382
382
382
381
381
381
381
465
381
465
381
465
381
465
381
100059
102862
102862
100061
100061
104391
104391
100063
100063
102861
102861
100065
100065
100067
100067
104766
104766
100069
100069
104762
104762
101731
101159
101159
114632
114632
100192
114635
110347
110347
114638
114638
100021
100021
100021
114641
114641
114641
100023
100023
100023
114645
114645
114645
104780
104780
114613
114613
100025
100025
100025
114648
114648
114648
100027
100027
100027
114651
114651
114651
114654
100029
100029
100029
104779
104779
114595
Ledger Bracket UHA
Ledger UH 100
Ledger UH 100
Ledger UH 100
Ledger UH 100
Ledger UH 104
Ledger UH 104
Ledger UH 125
Ledger UH 125
Ledger UH 125
Ledger UH 125
Ledger UH 150
Ledger UH 150
Ledger UH 150
Ledger UH 150
Ledger UH 150
Ledger UH 150
Ledger UH 200
Ledger UH 200
Ledger UH 200
Ledger UH 200
Ledger UH 200
Ledger UH 200
Ledger UH 25
Ledger UH 25
Ledger UH 25
Ledger UH 25
Ledger UH 250
Ledger UH 250
Ledger UH 250
Ledger UH 250
Ledger UH 250
Ledger UH 250
Ledger UH 300
Ledger UH 300
Ledger UH 300
Ledger UH 300
Ledger UH 300
Ledger UH 300
Ledger UH 400
Ledger UH 400
Ledger UH 400
Ledger UH 400
Ledger UH 50
Ledger UH 50
Ledger UH 50
465
381
465
381
465
381
465
381
465
381
465
381
465
381
465
381
465
381
465
381
465
476
380
456
379
455
464
463
380
456
379
455
380
464
456
379
463
455
380
464
456
379
463
455
380
456
379
455
380
464
456
379
463
455
380
464
456
379
455
463
455
380
464
456
380
456
379
101395
066046
066028
066066
034240
034250
034260
103850
112761
112830
139
101
97
103
116
113
119
140
22
22
611
Formwork Girders
418
486
466
466
466
466
466
466
466
466
466
466
466
466
466
466
466
466
136
560
560
560
560
560
560
167
560
560
187
560
561
457
561
561
561
561
561
561
36
Wall Formwork
Nail 3 x 80
Netting Tie
Column Formwork
710312
100871
112926
100977
100840
112765
100981
100973
100572
100985
106630
100573
100989
106624
100574
100993
100575
100969
024090
024090
710234
710330
710238
710229
706488
022250
022250
710336
710334
710334
780356
710381
710381
070890
781053
105032
722086
711071
112338
Slab Formwork
35
232
551
138
546
547
392
391
391
391
301
300
300
28
27
409
406
415
100
58
60
100
103
96
96
115
112
118
21
17
12
53
47
42
352
355
348
348
348
348
348
349
349
349
349
352
Shoring Systems
Magnet Holder for DSSE 642
Main Beam HDT 280
Main Beam HDT 440
Main Beam HDT 880
Main Beam SLT 150
Main Beam SLT 225
Main Beam SLT 375
Mounting Head FB
Mounting Plate ASG
MULTIPROP MP 120
MULTIPROP MP 250
MULTIPROP MP 350
MULTIPROP MP 480
MULTIPROP MP 625
Climbing Systems
114797
114797
114797
072230
072230
024922
106183
022010
022009
022008
061110
061100
061160
114036
114034
026638
026632
026536
066052
023860
023980
066042
066062
066032
066024
034110
034100
034120
112850
112849
114464
022630
022540
054344
111142
111142
027288
027289
027290
027291
027305
107169
107171
107170
107172
027302
Working Platforms
455
464
463
380
456
379
455
450
485
537
502
336
336
67
266
30
67
267
108
30
68
68
267
277
68
267
482
379
462
482
124
560
560
409
387
321
Bridge- and
Tunnel Formwork
Ledger UH 50
Ledger UH 72
Ledger UH 72
Ledger UH 75
Ledger UH 75
Ledger UH 75
Ledger UH 75
Lifting Gear-3 TRIO
Lifting Gear-3 TRIO
Lifting Gear-3 TRIO
Lifting Pin LICO
Lifting Pin TRIO
Lifting Pin TRIO
Locking Pin Ø 48
Locking Pin Ø 48
Locking Pin Ø 48
Lowering Device HDA
114595
100440
114124
100017
100017
114629
114629
106626
065067
065067
112986
101862
103212
044760
044760
044770
044770
044770
066091
115168
115168
023690
023690
115019
023440
023440
100478
111053
111053
111053
034530
711060
110281
026645
022003
028870
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
112888
112667
112806
112887
114486
114478
112778
112837
112822
112889
103330
103337
108785
108808
021920
102854
021940
021420
021960
021900
021820
102856
021840
021400
021880
021800
020820
020840
020860
020880
22
18
18
18
13
13
27
27
26
25
54
48
84
79
158
158
158
158
158
158
156
156
156
156
156
156
160
160
160
160
727165
727165
727165
111738
111738
111396
111396
065080
065080
065081
065081
061510
061510
061510
106939
106939
103434
103434
103434
103429
103429
103429
061530
061530
061500
061500
065050
065050
023880
023870
023850
023900
023960
023950
061290
066040
Panel Clip SPK
Panel D 125 x 100
583
595
591
316
539
316
537
124
539
125
540
308
485
542
484
537
324
484
536
324
484
536
307
538
308
538
370
539
58
58
57
59
59
59
304
99
612
066044
066043
066041
066060
066064
066063
066061
066050
066051
066020
066026
066025
066022
066021
066023
034080
034070
034060
034050
034010
034020
034040
034030
061020
061011
061000
061030
061013
061010
022600
022514
022650
022640
022610
022620
022510
022570
022560
022550
022530
022520
022820
022810
022800
022790
054314
054304
054364
054354
054334
054324
107474
107470
107481
107480
107473
107472
107493
107492
107498
107497
107503
107502
022601
022651
022641
022621
Panel D 125 x 25
Panel D 125 x 50
Panel D 125 x 75
Panel D 75 x 100
Panel D 75 x 25
Panel D 75 x 50
Panel D 75 x 75
Panel DA 125 x 100
Panel DA 125 x 75
Panel HS 120 x 30
Panel HS 120 x 60
Panel HS 150 x 30
Panel HS 150 x 60
Panel HS 150 x 90
Panel HS 90 x 120
Panel HS 90 x 30
Panel HS 90 x 60
Panel SDP 150 x 50
Panel SDP 150 x 75
Panel SDP 75 x 37.5
Panel SDP 75 x 50
Panel SDP 75 x 75
Panel TR 120 x 120
Panel TR 120 x 240
Panel TR 120 x 30
Panel TR 120 x 60
Panel TR 120 x 90
Panel TR 120 x7 2
Panel TR 270 x 120
Panel TR 270 x 240
Panel TR 270 x 30
Panel TR 270 x 60
Panel TR 270 x 72
Panel TR 270 x 90
Panel TR 60 x 30
Panel TR 60 x 60
Panel TR 60 x 72
Panel TR 60 x 90
Panel TR/4 330 x 30
Panel TR/4 330 x 60
Panel TR/4 330 x 72
Panel TR/4 330 x 90
Panel TRIO Structure TS 120 x
120
30
60
72
99
99
99
103
102
102
102
100
100
94
95
94
94
95
95
115
115
112
112
112
118
117
118
300
300
300
300
300
300
52
51
53
52
52
52
45
45
46
46
46
45
57
57
57
56
40
40
41
41
41
40
83
81
83
80
83
80
82
79
78
76
78
76
61
61
61
61
613
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
584
153
414
414
438
438
438
438
501
151
151
151
424
317
150
428
305
305
306
150
150
69
69
69
69
69
69
69
148
148
148
148
148
515
218
526
218
34
106
121
277
573
63
573
584
265
584
407
417
442
515
573
522
522
418
418
104
104
104
428
547
138
546
548
549
532
222
Shoring Systems
Platform SDB 150
Platform SDB 225
Platform SDB 300
Platform TRP 120
Platform TRP 240
Platform TRP 60
Platform TRP 72
Platform TRP 90
Plug DR 22
Plug FZR 22 mm
Plug MXM Ø 21
Plug Ø 20 mm
Plug Ø 20 mm
Plug Ø 20 mm
Plug Ø 20 mm
Plug Ø 20/24 mm
Plug Ø 20/24 mm
Plug Ø 20/24 mm
Pressure Sprayer
Climbing Systems
750135
701991
105843
105844
020320
020510
020310
020520
114301
105480
105484
105823
051120
111566
100813
051200
061060
061061
061062
101273
101269
054501
054506
054500
054505
054504
054503
054502
102920
103203
102415
105986
105985
116234
065036
065060
031360
116353
030290
030290
030290
030290
030300
030300
030300
030320
030320
026250
026250
026250
026250
026250
052010
052020
105842
105841
066100
066097
066095
051050
024920
072210
072210
105317
105331
031520
030460
Working Platforms
61
60
60
60
60
60
60
60
60
60
60
60
60
61
60
60
81
77
304
472
473
527
361
361
361
361
361
361
361
361
361
361
361
361
361
361
107
66
123
521
521
521
521
572
521
521
490
490
490
490
490
490
490
490
490
489
572
573
572
572
572
166
569
403
487
487
584
Bridge- and
Tunnel Formwork
Peg
PEP Frames PRK 100
PEP Frames PRK 120
PEP Frames PRK 150
PEP Frames PRK 180
PEP Frames PRK 200
PEP Frames PRK 210
PEP Frames PRK 225
PEP Frames PRK 230
PEP Frames PRK 266
PEP Frames PRK 296
PEP Frames PRK 62,5
PEP Frames PRK 75
PERI Hotknife
Peridrain Clip
Pin for GRB, galv.
Pin for GRB, galv.
022611
022511
022571
022561
022551
022531
022521
054315
054305
054365
054355
054335
054325
022631
022541
054345
108983
108984
061280
106965
100322
065042
112813
112814
111813
111814
115980
112718
111815
112788
111816
111817
111818
111819
111811
111812
023020
023020
023020
052821
052822
052824
052820
031675
052830
052831
113835
113839
113833
113836
113834
113829
113838
113837
115739
113832
102098
102110
102099
031674
031673
022210
022210
026644
102021
102023
750134
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
023560
106434
106433
106432
106429
103058
103059
103060
103061
103066
103067
103062
103063
103065
022004
022006
022005
103993
111276
054461
109910
061200
101404
101319
101318
101311
101464
100518
100516
100503
100514
028990
103800
028210
028220
028010
028010
028010
028010
028010
028010
028010
028010
028020
028020
028020
028020
028020
028020
028020
028020
028030
028030
028030
028030
028030
028030
114300
Prop PEP 10-250 A
Prop PEP 10-300 A
Prop PEP 10-350 A
Prop PEP 10-400 A
Prop PEP 20-300
Prop PEP 20-350
Prop PEP 20-400
Prop PEP 20-500
Prop PEP 30-150
Prop PEP 30-250
Prop PEP 30-300
Prop PEP 30-350
Prop PEP 30-400
Prophead GFH, galv.
Prophead SSK
Push-Pull Prop RS I
62
362
362
362
362
360
360
360
360
360
360
360
360
360
386
386
386
386
386
86
313
302
131
130
129
128
132
474
474
474
474
203
204
202
202
202
87
249
278
295
271
260
288
203
175
250
279
296
271
260
288
203
250
296
271
260
288
34
109924
109925
109926
109923
034660
034670
025200
025210
255
254
254
255
121
121
144
144
614
025220
025230
025240
025250
024640
108339
Quick
Quick
Quick
Quick
Quick
Quick
Release Corner SSE 3,0 m
Release Corner SSE Spec. Leng
Str. Hook Strap 24-100/140, galv.
Strap MPB 24/GT 24
051040
027180
027180
021790
021790
021790
029610
029610
072180
072180
072180
072180
051764
031440
031455
031420
031435
083041
083042
083045
083044
083043
083046
083025
083030
083024
083029
083028
083027
083026
083015
083020
083014
083019
083018
083017
083016
083008
083013
083007
083009
083012
083011
083010
083037
083036
083035
083034
083023
083022
083021
083031
083033
083032
083040
083039
083038
083048
083047
083049
Rack CB 240
Ratchet Lever SW 19
Ratchet Lever SW 19
Ratchet Wrench 1"
Ratchet Wrench 1"
Ratchet Wrench 1/2"
Ratchet Wrench 1/2"
Ratchet Wrench 1/2"
Ratchet Wrench 1/2"
Ratchet Wrench 3/4"
144
144
144
144
136
355
423
438
553
163
516
554
233
549
139
233
516
549
549
532
532
533
533
582
582
581
582
582
581
581
581
581
581
581
581
581
582
582
582
582
582
582
582
582
582
582
582
582
582
582
581
581
581
581
582
582
582
582
582
582
581
582
582
582
582
582
615
Formwork Girders
403
486
186
185
185
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
176
188
370
394
430
480
576
105
163
Wall Formwork
SB-L Anchor Bracket
Column Formwork
026530
026530
100903
100901
100901
026411
026411
026411
026411
026411
026411
026411
026412
026412
026412
026412
026412
026412
026412
026413
026413
026413
026413
026413
026413
026413
026414
026414
026414
026414
026414
026414
026414
026419
026419
026419
026419
026419
026419
026419
026418
026418
026418
026418
026418
026418
026418
026415
026415
026415
026415
026415
026415
026415
066085
027110
Slab Formwork
554
583
594
590
216
547
594
580
520
520
Shoring Systems
Router DW 625-E
Rus-Ply 21 mm 1250 x 2500 mm
Rus-Ply 21 mm 1500 x 3000 mm
Climbing Systems
044890
044890
044890
044890
108795
106081
071209
071202
052261
052271
Working Platforms
594
594
594
594
594
594
581
581
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
580
581
581
581
581
581
581
580
580
580
581
581
581
218
70
548
548
548
549
480
480
480
564
564
564
564
595
564
564
583
590
Bridge- and
Tunnel Formwork
Repoxal Glue, 1 kg
Ring Bolt UFE 12/90
082003
082002
082001
082006
082005
082004
082041
082042
082045
082044
082043
082046
082025
082030
082024
082029
082028
082027
082026
082015
082020
082014
082019
082018
082017
082016
082008
082013
082007
082012
082011
082010
082009
082037
082036
082035
082034
082023
082022
082021
082031
082033
082032
082040
082039
082038
082048
082047
082049
031550
107019
105318
105311
105326
105330
100694
100695
100693
722083
780304
722318
780305
780305
780302
730050
730050
730050
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
027110
027110
022017
034560
023590
023680
023680
023670
023670
029470
029470
029490
110084
026416
027298
027299
034690
071218
071219
114158
114158
026647
026647
017040
017040
017040
024530
024310
024350
112937
112937
110675
110675
071217
071217
071217
071216
071216
071216
112342
111072
710262
021770
111603
105524
105523
105525
111655
022018
071358
071356
071351
071359
071355
071357
071361
107801
107810
115504
115291
110044
051610
031645
031646
031647
031650
031651
616
Sealing Cone MX 55
Sealing Cone MX 55
Sealing Cone TRH 55
Sealing Cone TRH 55
Shaft Panel DSE 125
Shear Pin HDA
Shuttering Aid GFA
Side Guardrail Post
147
285
390
122
65
31
65
31
65
433
407
198
500
576
351
351
121
136
137
433
407
70
404
430
481
577
564
564
564
35
227
90
227
583
590
594
583
590
594
35
377
563
564
97
55
49
43
101
387
598
598
598
598
598
598
598
383
383
383
383
313
431
228
228
228
230
230
104643
031648
031649
031639
031657
031657
031656
031656
031671
031672
031677
065063
750132
750133
108869
103844
722457
711063
114107
114107
114107
051430
072170
072170
029620
102784
029650
029650
057276
102785
102785
029630
029630
029640
031480
031480
031480
031480
031480
070711
070711
070712
070712
070710
070710
070713
070713
020620
110022
110023
054464
065030
065031
065027
031626
031627
031627
031634
031634
100750
030820
113183
116432
027211
027211
027213
027213
SK Lead Cone DW 15
SK Tube Seal 22
SK Tube Seal 28
SK Tube Seal 42
Sliding Hatch Cover
Socket SW 19-1/2"
Socket SW 24-1/2"
Socket SW 27-1/2"
Socket SW 27-1/2"
Socket SW 30-3/4"
Socket SW 36-3/4"
Socket SW 36-3/4"
Socket SW 46-1"
Socket SW 46-1"
Socket SW 55-1"
Spacer M20-82
Spacer M24-82
Spacer TRH 15-30
Spacer UEC 10
Spanner LICO
230
229
229
228
232
552
232
552
229
229
229
526
584
584
416
137
569
569
32
182
184
437
139
547
549
516
234
550
550
516
550
233
550
550
233
410
418
438
554
487
576
487
576
487
576
487
576
439
500
501
87
217
217
217
217
190
217
192
195
482
575
36
277
188
552
188
552
617
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
378
461
488
392
467
450
467
450
451
467
450
451
467
450
451
467
467
467
450
133
133
133
133
133
133
186
133
133
133
133
282
282
282
282
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
Shoring Systems
Standard UVR 50
Standard UVR 50
Climbing Systems
102859
102859
100529
022026
100486
100486
100355
100355
106585
100373
100373
106586
100375
100375
106587
100377
100820
100488
100488
010600
010030
010610
010060
010070
010050
010050
010120
010080
010150
010090
012080
012150
012160
012050
103868
103868
103871
103871
103874
103874
103877
103877
103886
103886
103889
103889
103898
103898
103892
103892
103929
103929
103903
103903
103906
103906
103915
103915
103918
103918
103922
103922
103925
103925
103928
103928
103943
Working Platforms
188
552
573
564
564
564
564
564
564
245
379
488
498
497
376
368
98
498
183
532
584
108
108
69
268
584
108
540
315
541
30
68
540
29
267
366
448
448
452
448
448
449
449
450
446
446
447
447
447
446
446
370
395
481
577
312
378
461
378
461
378
461
378
461
455
378
461
Bridge- and
Tunnel Formwork
Spigot ULT 32
Spigot ULT 32
Spindle Head SRU
Spindle Spreader HD
Stacking Device MX
Stair Guardrail UAG
Stair Guardrail UAH
Stair Step UAR 100
Stair Step UAR 125
Standard UVR 100
Standard UVR 100
Standard UVR 150
Standard UVR 150
Standard UVR 200
Standard UVR 200
Standard UVR 300
Standard UVR 300
Standard UVR 400
Standard UVR 400
027210
027210
102109
024950
024960
024970
024980
024990
024550
030440
100301
100301
116039
110477
109630
019800
111665
112816
025730
031530
750040
066093
066099
750303
750303
750303
066094
066094
110939
110939
115058
115058
115058
113019
023390
019910
100742
100830
108189
109198
114179
109219
114731
107448
100737
100738
111103
111087
111095
111117
111124
017020
017020
017020
017020
110038
101306
101306
102860
102860
100009
100009
100012
100012
107930
100013
100013
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
103943
010440
010420
100778
065128
065129
065127
101934
108856
101927
108855
101935
101936
101937
101940
101928
101929
101930
101931
023030
023040
023050
023067
105978
023060
105953
023068
023069
023071
023072
023061
023062
023064
023065
023081
023080
023078
023079
023074
023075
023077
023076
065039
110406
065040
114496
114503
114509
107820
034360
034380
034350
101856
065104
101857
065110
101859
065116
101861
065122
107162
106582
106583
102031
102031
035500
035500
618
Stopend Tie-2 DSA
Stopend Trestle
Stopper MX 50 MF
Stopper MX 50 OF
Stopper MX 84 MF
Strap MPB 24
Stripping Cart, Alu
Stripping Cart, Alu
494
134
134
331
239
239
239
102
102
98
98
102
102
102
102
98
98
98
98
55
48
43
56
56
51
51
56
56
56
56
50
50
50
50
56
56
56
56
51
51
51
51
526
106
527
34
34
34
355
119
117
114
239
239
239
239
239
239
239
239
451
451
451
309
326
309
326
051060
051150
071291
114619
071364
026624
057050
102400
102400
017010
017010
017010
017010
017010
017010
017000
017000
112498
Strongback CB 270
Strongback CB 380
Stud Spanner MAXIMO
Supervisor
Swivel Head SRU
424
424
598
35
598
401
147
481
577
188
371
395
430
481
577
481
577
332
710293
710702
710290
061052
108108
112782
112783
072700
072710
100956
100954
110422
028710
099540
098217
107007
115350
051260
051270
051270
051250
051250
100908
101621
027540
027230
110595
061310
028590
028590
028590
115385
115385
115427
115427
030860
030860
030860
030860
030870
030870
030870
030840
030840
030840
030190
110612
030150
486
486
486
Table Connector STV
304
335
332
332
330
330
331
331
331
337
Template f. RUNDFLEX A250, I240, A128, I123 163
163
426
29
426
Tension Belt Connector Wall M24
427
405
Tension Belt l = 5.70 m, 25 kN
427
404
482
195
193
193
Tension Sleeve GFO
314
Tension Sleeve SAO
305
323
368
376
316
541
316
541
191
220
433
408
193
222
198
215
189
434
214
223
Tie Load B 15 l = 0.30 m
212
619
Formwork Girders
141
498
323
361
351
62
342
342
342
343
Wall Formwork
Universal Waler 245
UZ Beam Bracket 40
Column Formwork
103737
103737
028000
028000
028000
023920
065056
065065
065057
065058
Slab Formwork
469
469
469
469
84
378
462
378
462
378
462
378
462
462
107
124
67
88
549
549
549
548
404
308
257
314
531
303
303
270
63
31
363
392
265
563
137
563
137
563
137
563
563
563
563
563
482
152
152
152
152
152
314
307
576
Shoring Systems
Tool Box TRH
Top Standard UVH 50
Top Tie Bracket DAH
Top Tie TRH
Traverse GFT
Trestle P 80
TRIO Stripping Bar
TRIO Stripping Bar
Tripod PEP 10
Trolley HD
Climbing Systems
108114
108117
108120
108204
104032
100000
100000
100003
100003
100005
100005
100007
100007
101309
066086
034610
023630
106087
105346
105347
105327
105367
026646
061520
105791
110045
065051
061021
061022
103362
112588
112588
107152
022021
103716
024540
024470
024470
110272
110272
024690
024690
103444
104892
104647
103443
100909
022340
022350
022310
022320
022330
065074
065074
065074
Working Platforms
405
434
527
212
405
434
441
527
219
214
212
188
212
283
188
212
212
212
212
212
212
212
212
212
212
188
434
219
219
219
190
219
193
221
193
221
221
193
221
198
217
551
34
551
88
217
550
220
551
88
245
498
142
283
214
351
351
122
122
122
469
469
469
469
469
469
469
Bridge- and
Tunnel Formwork
Tie Rod B 20 Spec. Length
Tie Rod Spanner MX
Tie Rod Spanner MX
Tie TRH 15 - 30 / 99
Tie Yoke DW 15
Tie Yoke Head SRU
Tie Yoke SKZ
Tie Yoke SKZ
Tie Yoke SRU
Tilting Base MKF
030150
030150
030150
030740
030740
030740
030740
030740
030745
022030
030005
030005
030010
030010
030480
030480
030490
030170
030020
030180
030710
030720
030730
030160
030030
030030
030030
030640
030641
030680
030700
030700
030645
030645
030646
030646
030690
030340
030340
030340
108129
108129
114290
114290
108719
031070
031070
031050
031050
054480
037150
110756
024210
024210
110755
027296
027297
034620
034650
034640
110076
110160
110176
110208
110211
110526
108068
Service
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Alphabetical Index
031580
031590
031600
102945
102825
013020
013030
013080
101471
101470
101469
101467
101465
101411
101410
101409
101408
101407
101406
101405
101255
101256
101257
101258
101259
101260
101261
101248
101249
101250
101251
101252
101253
101254
101241
101242
101243
101244
101245
101246
101247
065105
065111
065117
065123
V-Tie Holder DW 15
V-Tie Holder DW 20
V-Tie Holder DW 26
190
192
194
141
141
139
139
139
132
132
132
132
132
131
131
131
131
131
131
131
130
130
130
130
130
130
130
129
129
129
129
129
129
129
128
128
128
128
128
128
128
238
238
238
238
023551
023551
021640
025760
110059
115189
023930
065046
065045
065076
110238
061051
100697
100698
100696
026531
026990
111866
107008
101964
066048
Waler 85
Waler 85
Waler Stop
Wall Clamp 105
Wall Clamp 55
Wall Clamp 75
Wall Holder GFW
Wall Holder SWH-2
Wall Tension Anchor
61
28
162
182
426
447
62
528
528
528
313
303
480
480
480
415
406
197
426
101
101
620
101986
066030
066068
114142
114142
114212
114212
114191
114191
114181
114181
114394
114842
114826
114846
023990
023995
023282
023292
023182
023192
054435
054391
054401
023281
023291
023181
023191
054395
054405
100091
100093
102951
102954
102957
100088
710880
780702
725574
711074
706454
710874
780354
750350
710886
113348
113349
113350
113347
710139
031150
066081
028060
028060
028060
024250
024250
024250
024250
024240
024240
024590
031300
010400
022460
012300
010500
Wall Tie UWT 110
Wall Tie UWT 140
Wall Tie UWT 170
Wall Tie UWT 220
Wall Tie UWT 270
Wall Tie UWT 45
Wedge Clamp DKS
Wedge K, galv.
Wedge K, galv.
Wedge K, galv.
Wedge K, galv.
Wedge KZ, galv.
Wedge KZ, galv.
96
96
103
23
19
23
19
23
19
23
19
14
14
14
14
54
49
54
54
49
49
43
43
43
61
61
60
60
60
60
480
480
480
480
480
480
562
561
561
561
561
561
561
561
561
561
561
561
561
562
215
104
145
206
285
143
182
206
285
143
283
388
215
134
152
282
134
4762
4762
4762
4762
4762
M12 x 60-8.8, galv.
M12 x 60-8.8, galv.
M12 x 90-8.8, galv.
M12 x 90-8.8, galv.
M30 x 70-8.8, galv.
Formwork Girders
Column Formwork
Slab Formwork
ISO
ISO
ISO
ISO
ISO
Shoring Systems
457
559
457
559
559
Bolt
Bolt
Bolt
Bolt
Bolt
Climbing Systems
Zyl.
Zyl.
Zyl.
Zyl.
Zyl.
Working Platforms
104278
104278
104528
104528
113007
Bridge- and
Tunnel Formwork
134
350
387
213
121
527
213
189
284
191
219
33
212
89
265
441
531
Wing Nut Spanner HD
Wing Nut Spanner HD
Wingnut MX
621
Service
010490
022027
022027
030110
030110
030110
030100
030100
030100
030990
030990
112386
030370
030370
030370
030370
065026
Wall Formwork
Alphabetical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
010030
010050
010050
010060
010070
010080
010090
010120
010150
010180
010190
010200
010270
010350
010400
010420
010440
010490
010500
010600
010610
012040
012050
012080
012090
012150
012160
012300
013010
013020
013030
013080
013130
013140
013180
013210
013220
013230
013240
017000
017000
017010
017010
017010
017010
017010
017010
017020
017020
017020
017020
017030
017030
017040
017040
017040
018050
018050
018060
018060
018060
018060
018060
018060
018060
018060
018060
622
Coupling VKZ 99
Bulkhead Tie
133
133
186
133
133
133
133
133
133
134
134
134
134
133
134
134
134
134
134
133
133
282
282
282
282
282
282
282
139
139
139
139
140
140
140
140
140
140
142
481
577
188
371
395
430
481
577
370
395
481
577
481
577
430
481
577
208
566
142
208
256
323
355
353
405
500
569
018280
018280
018280
018290
018290
018300
018300
018310
018320
018330
018350
019780
019780
019790
019790
019800
019810
019900
019910
019920
019930
019940
019950
019950
020310
020320
020330
020510
020520
020600
020620
020820
020830
020840
020850
020860
020870
020880
020890
021110
021120
021130
021140
021150
021160
021240
021250
021260
021270
021280
021290
021400
021410
021420
021430
021610
021620
021630
021640
021770
021790
021790
021790
021800
021810
021820
021830
Framing Clip, galv.
Framing Clip, galv.
Cross Strap, galv.
Cross Strap, galv.
Distribution Waler
240
325
564
325
574
368
376
574
559
559
559
374
368
375
367
368
369
366
366
369
369
366
375
367
438
438
440
438
438
439
439
160
160
160
160
160
160
160
160
166
166
166
166
166
167
167
167
167
168
168
168
156
157
158
159
161
161
162
162
564
163
516
554
156
157
156
157
623
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
46
60
46
60
45
60
47
60
52
61
52
61
52
61
53
61
52
61
53
61
53
61
56
57
57
57
57
31
66
66
107
66
123
55
48
43
51
50
50
50
50
56
56
56
56
56
51
51
51
51
56
56
56
56
49
60
49
60
49
48
60
54
61
54
61
54
53
Shoring Systems
Panel TR 270 x 60
Panel TR 270 x 30
Panel TR 270 x 240
Panel TR 120 x 120
Panel TR 120 x 90
Panel TR 120 x7 2
Panel TR 120 x 60
Panel TR 120 x 30
Panel TR 60 x 90
Panel TR 60 x 72
Panel TR 60 x 60
Panel TR 60 x 30
Climbing Systems
022550
022551
022560
022561
022570
022571
022580
022581
022600
022601
022610
022611
022620
022621
022630
022631
022640
022641
022650
022651
022660
022661
022790
022800
022810
022820
022840
022950
022950
023010
023020
023020
023020
023030
023040
023050
023060
023061
023062
023064
023065
023067
023068
023069
023071
023072
023074
023075
023076
023077
023078
023079
023080
023081
023170
023181
023182
023191
023192
023200
023201
023270
023281
023282
023291
023292
023300
Working Platforms
156
157
156
157
158
159
158
159
158
159
158
159
146
163
163
146
387
386
386
386
387
391
391
391
392
388
208
388
390
387
388
386
392
389
389
390
392
392
350
387
214
166
569
167
500
569
167
560
152
152
152
152
152
152
153
153
152
152
45
60
51
45
60
46
60
47
60
Bridge- and
Tunnel Formwork
Crane Eye 24, left
Crane Eye 24, left
Crane Eye 24, right
Crane Eye 24, right
Lowering Device HDA
Head Spindle HDK45
Main Beam HDT 880
Main Beam HDT 440
Main Beam HDT 280
Brace Connector HDR
Brace Connector HDR
Shear Pin HDA
Base Adapter HD
Trolley HD
Compression Head HD
Base Plate HD
Wing Nut Spanner HD
Wing Nut Spanner HD
Pin for GRB, galv.
Pin for GRB, galv.
Corner Spindle RKR
Panel TR 270 x 120
Panel TR 120 x 240
Panel TR 270 x 90
Panel TR 270 x 72
021840
021850
021880
021890
021900
021910
021920
021930
021940
021950
021960
021970
021980
021980
021990
021990
022003
022004
022005
022006
022007
022008
022009
022010
022011
022013
022016
022016
022017
022018
022019
022020
022021
022022
022023
022024
022025
022026
022027
022027
022030
022210
022210
022230
022230
022230
022250
022250
022310
022320
022330
022340
022350
022380
022400
022410
022440
022460
022510
022511
022514
022520
022521
022530
022531
022540
022541
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
023301
023390
023440
023440
023450
023460
023500
023500
023500
023500
023550
023551
023551
023560
023590
023630
023640
023640
023650
023650
023650
023660
023660
023660
023660
023670
023670
023680
023680
023690
023690
023800
023820
023820
023850
023860
023870
023880
023891
023900
023920
023930
023940
023950
023960
023971
023980
023990
023995
024000
024070
024070
024070
024080
024080
024090
024090
024140
024140
024180
024180
024210
024210
024220
024240
024240
024250
624
Lifting Pin TRIO
Lifting Pin TRIO
Waler 85
Waler 85
Universal Waler 245
Waler Stop
Corner Alu TAE 90/2
Tie Yoke SKZ
Tie Yoke SKZ
Wedge KZ, galv.
Wedge KZ, galv.
Wedge K, galv.
61
267
68
267
55
50
27
61
161
266
61
61
28
62
65
67
28
62
63
89
28
29
63
207
266
31
65
31
65
68
267
67
63
28
57
58
58
58
59
59
62
62
161
59
59
60
60
54
49
499
136
282
440
136
440
136
560
136
565
187
499
142
283
143
143
283
143
024250
024250
024250
024260
024260
024270
024270
024310
024350
024360
024360
024380
024390
024410
024470
024470
024480
024480
024490
024500
024510
024520
024530
024540
024550
024590
024600
024630
024640
024690
024690
024880
024900
024910
024910
024920
024921
024922
024923
024950
024960
024970
024980
024990
025200
025210
025220
025230
025240
025250
025660
025660
025670
025670
025690
025700
025710
025720
025730
025740
025740
025740
025740
025750
025760
026200
026220
Wedge K, galv.
Wedge K, galv.
Wedge K, galv.
Bolt ISO 4014 M20 x 80-8.8, galv.
Bolt ISO 4014 M20 x 100-8.8, galv.
Bolt ISO 4014 M20 x 100-8.8, galv.
Brace Frame SB-A0
Brace Frame SB-A
Brace Frame SB-B
Brace Frame SB-C
Bolt ISO 4014 M24 x 80-10.9, galv.
182
206
285
138
562
138
562
564
564
432
565
565
565
565
137
563
145
162
562
562
562
562
564
563
564
388
136
136
136
137
563
575
558
187
558
547
547
547
547
564
564
564
564
564
144
144
144
144
144
144
484
536
484
536
180
180
181
181
183
182
107
64
32
183
182
567
558
625
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
370
394
430
480
576
435
408
417
515
406
417
427
442
558
215
199
403
486
415
415
399
401
400
402
401
402
401
406
403
409
416
409
403
409
404
70
404
398
399
400
406
176
147
286
176
147
286
163
147
285
208
565
438
553
553
188
552
188
552
199
438
410
418
553
188
552
193
Shoring Systems
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Bolt ISO 4014 M24 x 70-10.9, galv.
Anchor Positioning Stud M36, galv.
Mounting Plate ASG
Corner Frame FBE
Guardrail Post FBP
Mounting Head FB
Anchor Loop
Anchor Loop
Ratchet Lever SW 19
Ratchet Lever SW 19
Insert Socket SW 19
Climbing Systems
026419
026419
026419
026419
026419
026420
026420
026420
026420
026430
026430
026430
026430
026430
026440
026460
026530
026530
026531
026536
026622
026624
026625
026626
026627
026628
026631
026632
026635
026636
026636
026638
026644
026645
026646
026647
026647
026648
026649
026652
026990
027060
027060
027060
027070
027070
027070
027110
027110
027110
027170
027170
027180
027180
027200
027210
027210
027211
027211
027212
027212
027212
027212
027212
027213
027213
027230
Working Platforms
406
417
441
514
407
417
442
514
407
417
442
515
573
215
560
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
176
188
370
394
430
480
576
576
188
176
370
394
430
480
576
188
176
370
394
430
480
576
188
176
Bridge- and
Tunnel Formwork
Anchor Sleeve M24
Anchor Sleeve M24
Anchor Sleeve M24
Anchor Sleeve M24
Anchor Sleeve DW 15
Bolt ISO 4017 M24 x 50-10.9, galv.
026230
026230
026230
026230
026240
026240
026240
026240
026250
026250
026250
026250
026250
026280
026290
026411
026411
026411
026411
026411
026411
026411
026412
026412
026412
026412
026412
026412
026412
026413
026413
026413
026413
026413
026413
026413
026414
026414
026414
026414
026414
026414
026414
026415
026415
026415
026415
026415
026415
026415
026416
026417
026417
026417
026417
026417
026417
026417
026418
026418
026418
026418
026418
026418
026418
026419
026419
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
027288
027289
027290
027291
027296
027297
027298
027299
027301
027302
027305
027310
027340
027480
027500
027510
027520
027530
027540
027590
027590
027650
027680
027680
027680
027680
027690
027690
027690
027690
027790
027890
027930
027930
027940
027940
027990
027990
028000
028000
028000
028010
028010
028010
028010
028010
028010
028010
028010
028020
028020
028020
028020
028020
028020
028020
028020
028030
028030
028030
028030
028030
028030
028050
028050
028050
028060
626
MULTIPROP MP 120
MULTIPROP MP 250
MULTIPROP MP 350
MULTIPROP MP 480
Tilting Base MKF
Connector MPV-2
MULTIPROP MP 625
Base MP 50
Brace Frame SB 1
Brace Frame SB 2
Brace Clamp, galv.
Brace Clamp, galv.
348
348
348
348
351
351
351
351
352
352
348
350
559
195
183
184
189
196
193
184
145
195
185
106
64
32
107
64
181
566
324
322
324
553
323
362
322
565
323
361
351
202
87
249
278
295
271
260
288
203
175
250
279
296
271
260
288
203
250
296
271
260
288
144
206
284
145
028060
028060
028070
028070
028070
028080
028080
028100
028100
028100
028110
028110
028110
028110
028110
028110
028110
028120
028120
028120
028120
028120
028120
028210
028220
028330
028340
028350
028360
028370
028380
028390
028400
028460
028470
028480
028490
028590
028590
028590
028660
028670
028680
028710
028720
028790
028870
028890
028990
029270
029270
029280
029280
029390
029420
029430
029430
029440
029440
029440
029470
029470
029490
029540
029550
029550
029560
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Kicker AV RSS III
Push-Pull Prop RS I
Frame MRK 90
Frame MRK 120
Frame MRK 150
Frame MRK 225
Frame MRK 296
Frame MRK 137,5
Frame MRK 62,5
Frame MRK 75
Frame MRK 201,5
Frame MRK 230
Frame MRK 237
Frame MRK 266
Bolt ISO 4017 M30 x 70-8.8, galv.
Bolt ISO 4017 M36 x 70-8.8, galv.
Bolt ISO 4017 M36 x 70-8.8, galv.
Bolt ISO 4014 M30 x 130-10.9, galv.
Bolt ISO 4014 M36 x 130-10.9, galv.
Bolt ISO 4014 M36 x 130-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
206
285
144
206
284
205
389
202
315
307
204
250
279
296
272
261
288
205
251
297
272
261
289
202
202
348
348
348
349
349
348
348
348
349
349
349
349
323
368
376
322
322
322
337
338
344
321
322
203
435
408
435
408
199
559
199
559
199
435
562
433
407
198
558
198
558
433
627
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
441
193
221
245
222
188
212
212
193
221
198
213
191
220
191
219
219
219
193
221
193
221
222
222
219
221
190
219
212
212
212
212
405
434
441
527
219
575
190
219
219
575
192
220
215
189
434
191
220
433
408
193
222
198
197
194
221
194
221
191
219
554
583
590
554
583
590
Shoring Systems
Tie Rod B 20 Spec. Length
Clamp Lock
Drill Bit Ø 35 mm
Drill Bit Ø 35 mm
Drill Bit Ø 35 mm
Drill Bit Ø 20 mm
Drill Bit Ø 20 mm
Drill Bit Ø 20 mm
Climbing Systems
030370
030400
030420
030440
030460
030480
030480
030490
030500
030500
030500
030550
030580
030580
030590
030590
030640
030641
030645
030645
030646
030646
030663
030664
030680
030690
030700
030700
030710
030720
030730
030740
030740
030740
030740
030740
030745
030790
030800
030800
030800
030820
030830
030830
030840
030840
030840
030860
030860
030860
030860
030870
030870
030870
030940
030970
030970
030980
030980
030990
030990
031030
031030
031030
031040
031040
031040
Working Platforms
407
558
233
549
549
233
550
550
234
550
212
188
212
283
212
212
188
434
212
188
212
434
441
405
434
527
189
213
441
405
503
213
189
213
189
284
213
121
527
214
120
214
212
405
434
527
212
212
212
214
143
574
106
121
277
573
63
573
584
265
584
193
221
198
212
89
265
Bridge- and
Tunnel Formwork
Bolt ISO 4014 M24 x 120-10.9, galv.
Bolt ISO 4014 M24 x 120-10.9, galv.
Ratchet Wrench 1"
Ratchet Wrench 1"
Socket SW 19-1/2"
Socket SW 46-1"
Socket SW 46-1"
Socket SW 55-1"
Socket SW 27-1/2"
Socket SW 27-1/2"
Tie Rod B 15 l = 0.30 m
Tie Rod B 15 l = 0.30 m
Tie Rod B 15 l = 0.30 m
Tie Rod B 15 l = 0.30 m
Plug Ø 20 mm
Plug Ø 20 mm
Plug Ø 20 mm
Plug Ø 20 mm
Plug Ø 20/24 mm
Plug Ø 20/24 mm
Plug Ø 20/24 mm
029560
029560
029610
029610
029620
029630
029630
029640
029650
029650
030005
030005
030010
030010
030020
030030
030030
030030
030050
030050
030050
030050
030050
030050
030050
030050
030060
030070
030070
030070
030070
030090
030090
030100
030100
030100
030110
030110
030110
030130
030130
030140
030150
030150
030150
030150
030160
030170
030180
030190
030260
030260
030290
030290
030290
030290
030300
030300
030300
030320
030320
030340
030340
030340
030370
030370
030370
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
031050
031050
031070
031070
031080
031080
031080
031090
031100
031120
031150
031200
031200
031200
031220
031260
031300
031320
031360
031390
031420
031435
031440
031455
031480
031480
031480
031480
031480
031520
031530
031550
031580
031590
031600
031626
031627
031627
031631
031632
031633
031634
031634
031635
031636
031637
031638
031639
031641
031642
031643
031643
031644
031644
031645
031646
031647
031648
031649
031650
031651
031652
031653
031654
031655
031655
031656
628
Drill Bit Ø 25 mm
Drill Bit Ø 25 mm
Drill Bit Ø 25 mm
Drill Bit Ø 40 mm
Drill Bit Ø 50 mm
Plug FZR 22 mm
Cone FZR 22
Pressure Sprayer
Repoxal Glue, 1 kg
V-Tie Holder DW 15
V-Tie Holder DW 20
V-Tie Holder DW 26
DK Cone DW 15/35
DK Cone DW 15/55
DK Cone DW 20/55
DK Cone DW 26/55
DK Cone Remover UNI
DK Cone Remover UNI
220
551
217
550
554
583
590
554
554
554
215
143
283
573
434
218
215
218
218
218
533
533
532
532
233
410
418
438
554
532
532
218
190
192
194
217
190
217
190
192
194
192
195
226
226
226
226
228
227
227
227
230
232
552
228
228
228
229
229
230
230
231
231
231
232
551
232
031656
031657
031657
031671
031672
031673
031674
031675
031677
034010
034020
034030
034040
034050
034060
034070
034080
034100
034110
034120
034130
034140
034150
034160
034170
034180
034200
034210
034220
034230
034240
034250
034260
034280
034290
034320
034330
034350
034360
034370
034380
034390
034400
034410
034460
034470
034480
034500
034510
034520
034530
034540
034550
034550
034560
034570
034580
034580
034580
034580
034580
034580
034580
034610
034620
034640
034650
SK Tube Seal 22
SK Tube Seal 28
PERI Hotknife
SK Tube Seal 42
Panel HS 150 x 90
Panel HS 90 x 120
Panel HS 90 x 60
Panel HS 90 x 30
Panel HS 150 x 60
Panel HS 150 x 30
Panel HS 120 x 60
Panel HS 120 x 30
Clip HSC, galv.
Crane Hook HSKA
Bracket HSK 60
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
Guardrail Post HSGP
552
232
552
229
229
572
572
572
229
112
118
118
117
112
112
115
115
112
115
118
113
118
113
119
114
119
113
119
116
116
116
113
119
115
116
114
120
114
119
117
117
117
114
119
120
117
114
120
120
124
124
120
122
207
122
123
105
123
89
151
390
415
529
124
122
122
122
629
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
292
292
292
292
292
292
292
292
292
292
292
292
293
293
523
523
523
523
523
523
523
422
423
422
425
423
428
424
425
423
425
424
424
424
430
429
428
429
429
427
427
404
426
427
405
248
294
269
258
286
393
436
436
437
249
295
271
260
287
394
437
248
294
270
259
286
394
Shoring Systems
Crane Eye CB 240
Carriage CB 240
Rack CB 240
Strongback CB 270
Connector TRIO-CB
Strongback CB 380
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 180/6, galv.
Ladder 220/6
Sliding Hatch Cover
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Ladder Base, galv.
Climbing Systems
045041
045042
045043
045050
045051
045052
045053
045060
045061
045062
045063
045200
045210
045211
050000
050030
050040
050070
050080
050190
050200
051000
051010
051020
051030
051040
051050
051060
051090
051100
051110
051120
051130
051150
051160
051190
051200
051210
051220
051230
051250
051250
051260
051270
051270
051410
051410
051410
051410
051410
051410
051410
051420
051430
051450
051450
051450
051450
051450
051450
051450
051460
051460
051460
051460
051460
051460
Working Platforms
121
121
123
121
559
309
326
325
334
529
245
245
284
568
207
246
245
244
244
244
246
246
268
257
247
268
257
247
269
258
247
293
269
258
248
269
258
207
256
277
256
255
255
255
255
67
266
30
67
267
554
583
594
590
292
292
292
292
292
292
292
292
292
292
292
292
292
Bridge- and
Tunnel Formwork
Stripping Cart, Alu
Stripping Cart, Alu
Guardrail Holder
Guardrail Holder
Guardrail Holder
Tie Yoke DW 15
Concreting Landing
Concreting Landing
Concreting Landing
Brace Connector QR
Brace Connector QR
Brace Connector QR
Lifting Gear-3 TRIO
Lifting Gear-3 TRIO
Lifting Gear-3 TRIO
034660
034670
034680
034690
035440
035500
035500
035700
035700
035700
037150
037160
037160
037160
037190
037190
037210
037250
037260
037270
037320
037400
037400
037400
037410
037410
037410
037420
037420
037420
037430
037430
037430
037430
037440
037440
037440
037530
037530
037530
037540
037550
037590
037600
037610
044760
044760
044770
044770
044770
044890
044890
044890
044890
045010
045011
045012
045013
045020
045021
045022
045023
045030
045031
045032
045033
045040
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
051460
051610
051630
051640
051640
051650
051650
051764
052010
052020
052060
052090
052095
052130
052150
052159
052240
052260
052261
052270
052271
052380
052460
052590
052621
052622
052624
052800
052810
052815
052816
052818
052820
052821
052822
052823
052824
052828
052829
052830
052831
052839
054200
054210
054220
054230
054240
054240
054304
054305
054314
054315
054324
054325
054334
054335
054344
054345
054354
054355
054364
054365
054374
054375
054384
054391
054395
630
Ladder Base, galv.
Side Guardrail Post
Ratchet Wrench 3/4"
Fin-Ply 21 mm 1500 x 2500 mm
Fin-Ply 12 mm 1500 x 3000 mm
Fin-Ply 15 mm 1500 x 3000 mm
Fin-Ply 18 mm 1500 x 3000 mm
Fin-Ply 21 mm 1250 x 2500 mm
Rus-Ply 21 mm 1250 x 2500 mm
Fin-Ply 21 mm 1500 x 3000 mm
Rus-Ply 21 mm 1500 x 3000 mm
Fin-Ply 30 mm 1250 x 3610 mm
Panel TR/4 330 x 90
Panel TR/4 330 x 72
Panel TR/4 330 x 60
Panel TR/4 330 x 30
436
431
431
431
562
432
565
549
522
522
520
595
520
595
520
520
520
520
520
520
520
523
520
523
522
522
522
523
595
595
595
595
521
521
521
520
521
523
520
521
521
523
264
264
264
265
266
574
40
60
40
60
40
60
41
60
42
60
41
60
41
60
42
60
44
43
60
054401
054405
054414
054430
054435
054461
054464
054475
054480
054500
054501
054502
054503
054504
054505
054506
054510
054511
054512
054517
054518
054519
054528
054529
057050
057276
061000
061010
061011
061013
061020
061021
061022
061023
061024
061026
061027
061030
061036
061038
061045
061046
061049
061051
061052
061060
061061
061062
061100
061110
061160
061180
061200
061210
061230
061250
061260
061260
061260
061280
061290
061300
061310
061500
061500
061510
061510
Spacer TRH 15-30
Guardrail Post TRH
Tie TRH 15 - 30 / 99
Platform TRP 240
Platform TRP 120
Platform TRP 90
Platform TRP 72
Platform TRP 60
Kicker TRP
Bracing TRP 120
Bracing TRP 240
Socket SW 30-3/4"
Panel SDP 150 x 75
Panel SDP 75 x 75
Panel SDP 150 x 50
Panel SDP 75 x 50
End Support SSL
Cover Strip SAL 50
Cover Strip SAL 150
Cover Strip SAL 75
Panel SDP 75 x 37.5
Edge Beam SRT-2 150
Edge Beam SRT-2 75
Wall Holder SWH-2
Table Connector STV
Platform SDB 150
Platform SDB 225
Platform SDB 300
Main Beam SLT 225
Main Beam SLT 150
Main Beam SLT 375
Combihead SCK
Prophead SSK
Drophead SFK
Bolt EN 14399-4 M12 x 140-10.9
Guardrail Post SGP
Guardrail Post SGP
Guardrail Post SGP
Panel Clip SPK
Tension Sleeve SAO
43
60
42
44
43
86
87
85
88
69
69
69
69
69
69
69
71
71
71
72
71
73
71
71
147
550
300
300
300
300
300
303
303
304
301
301
301
300
303
301
301
301
303
303
304
305
305
306
300
301
300
302
302
302
560
306
306
334
356
304
304
305
305
308
538
308
485
631
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
238
239
238
238
238
238
238
239
238
238
238
238
238
239
238
240
240
240
239
239
239
240
94
95
94
95
96
94
95
97
96
96
96
97
99
99
100
99
99
101
100
101
100
100
100
101
103
102
103
102
102
103
103
103
104
104
106
207
105
105
107
107
108
108
108
540
104
Shoring Systems
Cutting Cost ASP
Panel D 125 x 100
Panel D 125 x 75
Panel D 125 x 50
Panel D 125 x 25
Panel DA 125 x 100
Panel DA 125 x 75
Panel D 75 x 100
Panel D 75 x 75
Panel D 75 x 50
Panel D 75 x 25
Wedge Clamp DKS
Brace Connector DRA
Brace Connector DRA
Top Tie Bracket DAH
Climbing Systems
065109
065110
065111
065112
065113
065114
065115
065116
065117
065118
065119
065120
065121
065122
065123
065124
065125
065126
065127
065128
065129
065130
066020
066021
066022
066023
066024
066025
066026
066028
066029
066030
066032
066033
066040
066041
066042
066043
066044
066046
066047
066048
066050
066051
066052
066053
066060
066061
066062
066063
066064
066066
066067
066068
066080
066081
066082
066082
066084
066085
066086
066090
066091
066093
066094
066094
066095
Working Platforms
542
308
307
538
485
536
530
531
531
531
531
531
531
531
531
531
217
217
217
218
218
526
527
527
528
528
370
539
531
342
342
343
526
526
526
342
402
432
529
485
537
485
536
343
343
343
314
307
575
314
307
576
344
528
124
539
125
540
238
238
238
238
239
238
238
238
238
Bridge- and
Tunnel Formwork
Butt Strap 54/30 mm
Cone DR 22
Plug DR 22
Stopend Trestle
Peg
Wall Clamp 55
Wall Clamp 105
Trestle P 80
UZ Beam Bracket 40
Formwork Bracket-2
AW Handrail Post
AW Clamp 8-10
AW Bracket
Wall Clamp 75
061510
061520
061530
061530
065016
065016
065017
065018
065019
065020
065021
065022
065023
065024
065025
065026
065027
065030
065031
065033
065036
065039
065040
065042
065045
065046
065050
065050
065051
065056
065057
065058
065060
065062
065063
065065
065066
065066
065066
065067
065067
065068
065068
065070
065071
065072
065073
065073
065073
065074
065074
065074
065075
065076
065080
065080
065081
065081
065100
065101
065102
065103
065104
065105
065106
065107
065108
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
066097
066099
066100
070030
070100
070710
070710
070711
070711
070712
070712
070713
070713
070740
070740
070760
070760
070890
071200
071202
071204
071204
071204
071209
071216
071216
071216
071217
071217
071217
071218
071219
071271
071290
071291
071340
071340
071350
071351
071355
071356
071357
071358
071359
071361
071362
071364
072140
072140
072150
072150
072160
072160
072170
072170
072180
072180
072180
072180
072210
072210
072220
072220
072230
072230
072240
072240
632
Crane Splice GT 24
Crane Splice GT 24
Assembly on Site
Design Calculation
Supervisor
Bit Point TX 30
Bit Point TX 30
Ratchet Wrench 1/2"
Ratchet Wrench 1/2"
Ratchet Wrench 1/2"
Ratchet Wrench 1/2"
104
108
104
576
559
487
576
487
576
487
576
487
576
325
553
146
162
561
590
580
580
590
594
594
583
590
594
583
590
594
136
137
598
598
598
583
594
598
598
598
598
598
598
598
598
598
598
138
546
138
546
139
546
139
547
139
233
516
549
138
546
138
546
138
546
138
546
072700
072710
074890
074890
074905
074905
074910
074910
074920
074920
074930
074930
074940
074940
074950
074950
074960
074960
074970
074970
074980
074980
074990
074990
075100
075100
075120
075120
075150
075150
075180
075180
075210
075210
075240
075240
075270
075270
075300
075300
075330
075330
075360
075360
075390
075390
075420
075420
075450
075450
075480
075480
075510
075510
075540
075540
075570
075570
075600
075600
079300
079360
079420
079480
079540
079600
082001
330
330
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
6
321
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
2
320
354
354
354
354
354
354
594
633
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
581
581
581
581
581
582
582
582
581
581
581
581
582
582
581
582
582
582
582
581
581
582
582
582
163
163
378
462
378
462
378
462
378
462
378
461
378
461
378
461
377
461
380
456
380
464
456
380
464
456
380
464
456
380
464
456
380
464
456
463
463
382
466
382
466
382
466
Shoring Systems
Template f. RUNDFLEX A250, I240, A128, I123
Standard UVR 200
Standard UVR 200
Standard UVR 300
Standard UVR 300
Standard UVR 400
Standard UVR 400
Ledger UH 75
Ledger UH 75
Ledger UH 150
Ledger UH 150
Ledger UH 150
Ledger UH 200
Ledger UH 200
Ledger UH 200
Ledger UH 250
Ledger UH 250
Ledger UH 250
Ledger UH 300
Ledger UH 300
Ledger UH 300
Ledger UH 400
Ledger UH 400
Ledger UH 400
Climbing Systems
083026
083027
083028
083029
083030
083031
083032
083033
083034
083035
083036
083037
083038
083039
083040
083041
083042
083043
083044
083045
083046
083047
083048
083049
098217
099540
100000
100000
100003
100003
100005
100005
100007
100007
100009
100009
100012
100012
100013
100013
100014
100014
100017
100017
100021
100021
100021
100023
100023
100023
100025
100025
100025
100027
100027
100027
100029
100029
100029
100031
100039
100042
100042
100047
100047
100049
100049
Working Platforms
594
594
594
594
594
580
580
580
580
580
580
580
580
580
580
580
580
580
580
581
581
581
580
580
580
580
580
580
580
581
581
581
580
580
580
580
580
580
580
581
581
580
580
580
580
581
581
581
582
582
582
582
582
582
582
582
582
582
582
582
582
582
582
582
582
581
581
Bridge- and
Tunnel Formwork
082002
082003
082004
082005
082006
082007
082008
082009
082010
082011
082012
082013
082014
082015
082016
082017
082018
082019
082020
082021
082022
082023
082024
082025
082026
082027
082028
082029
082030
082031
082032
082033
082034
082035
082036
082037
082038
082039
082040
082041
082042
082043
082044
082045
082046
082047
082048
082049
083007
083008
083009
083010
083011
083012
083013
083014
083015
083016
083017
083018
083019
083020
083021
083022
083023
083024
083025
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
100051
100051
100053
100053
100055
100055
100057
100057
100059
100059
100061
100061
100063
100063
100065
100065
100067
100067
100069
100069
100076
100079
100082
100085
100088
100091
100093
100149
100159
100183
100185
100192
100224
100235
100242
100242
100244
100244
100265
100266
100267
100268
100301
100301
100322
100330
100336
100339
100349
100355
100355
100373
100373
100375
100375
100377
100401
100411
100411
100416
100419
100422
100425
100428
100440
100444
100452
634
Wall Tie UWT 45
Wall Tie UWT 110
Wall Tie UWT 140
Ledger UH 104
Base Plate UJP
Base Plate UJP
Guardrail UPG 150
Guardrail UPG 200
Guardrail UPG 250
Guardrail UPG 300
Spigot ULT 32
Spigot ULT 32
Ledger UH 72
382
466
382
466
381
465
381
465
381
465
381
465
381
465
381
465
381
465
381
465
463
463
463
463
480
480
480
471
460
487
487
464
471
471
374
460
374
461
475
475
475
475
379
488
473
487
487
487
470
467
450
467
450
467
450
467
472
374
460
483
483
483
483
483
464
470
490
100478
100486
100486
100488
100488
100503
100514
100516
100518
100529
100541
100572
100573
100574
100575
100580
100581
100583
100660
100660
100678
100678
100693
100694
100695
100696
100697
100698
100711
100719
100719
100737
100738
100742
100750
100778
100810
100813
100820
100830
100840
100852
100863
100863
100870
100871
100901
100901
100903
100908
100909
100954
100956
100969
100973
100977
100981
100985
100989
100993
101159
101159
101241
101242
101243
101244
101245
Ring Bolt UFE 12/90
Stair Guardrail UAG
Spacer UEC 10
Guardrail UPG 400
Stair Guardrail UAH
Handle Lock UJS
Handle Lock UJS
Base Beam UVA 250
Netting Tie
SB-L Anchor Bracket
Ledger UH 100
Ledger UH 100
482
467
450
467
450
474
474
474
474
488
150
466
466
466
466
474
474
473
483
542
483
542
480
480
480
480
480
480
470
379
483
446
446
448
482
331
475
150
467
448
466
487
377
461
475
486
185
185
186
482
482
331
331
466
466
466
466
466
466
466
380
456
128
128
128
128
128
635
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
476
497
497
187
497
497
497
470
50
55
44
337
239
239
488
239
489
239
336
393
98
98
98
98
98
102
102
102
102
102
101
96
233
552
204
187
487
487
309
326
572
572
573
573
514
559
506
506
507
507
507
508
508
509
509
510
337
512
506
506
337
516
512
513
508
223
515
Shoring Systems
Ledger Bracket UHA
Central cross 170
Concrete Cone Gauge
Concrete Cone Gauge
Peridrain Clip
Bolt ISO 4017 M12 x 30-8.8, galv.
GKB Work Cage
Central cross 200
Climbing Systems
101731
101773
101774
101776
101776
101778
101779
101799
101813
101823
101829
101854
101856
101857
101858
101859
101860
101861
101862
101916
101927
101928
101929
101930
101931
101934
101935
101936
101937
101940
101964
101986
101995
101995
102018
102018
102021
102023
102031
102031
102098
102099
102109
102110
102111
102120
102184
102185
102186
102187
102188
102190
102193
102195
102196
102197
102210
102217
102219
102220
102251
102317
102327
102328
102329
102390
102394
Working Platforms
128
128
129
129
129
129
129
129
129
130
130
130
130
130
130
130
150
150
334
378
461
462
128
129
130
486
486
486
486
468
468
468
468
468
468
468
468
139
131
131
131
131
131
131
131
131
132
132
132
132
132
132
475
470
468
468
66
89
490
195
487
487
487
487
446
143
574
Bridge- and
Tunnel Formwork
Standard UVR 100
Standard UVR 100
Top Standard UVH 50
101246
101247
101248
101249
101250
101251
101252
101253
101254
101255
101256
101257
101258
101259
101260
101261
101269
101273
101290
101306
101306
101309
101311
101318
101319
101347
101348
101349
101350
101360
101372
101373
101375
101378
101379
101381
101394
101395
101404
101405
101406
101407
101408
101409
101410
101411
101464
101465
101467
101469
101470
101471
101576
101579
101588
101591
101592
101592
101596
101621
101656
101657
101658
101659
101671
101706
101706
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
102395
102396
102400
102400
102415
102605
102617
102617
102778
102779
102784
102785
102785
102822
102825
102846
102846
102853
102854
102855
102856
102859
102859
102860
102860
102861
102861
102862
102862
102920
102945
102951
102954
102957
103054
103058
103059
103060
103061
103062
103063
103065
103066
103067
103203
103212
103274
103275
103284
103311
103317
103321
103323
103330
103333
103337
103362
103369
103374
103391
103417
103429
103429
103429
103434
103434
103434
636
Deck Link Plate UED
Socket SW 24-1/2"
Socket SW 36-3/4"
Socket SW 36-3/4"
Standard UVR 50
Standard UVR 50
Standard UVR 150
Standard UVR 150
Wall Tie UWT 170
Wall Tie UWT 220
Wall Tie UWT 270
Prop PEP 20-300
Prop PEP 20-350
Prop PEP 20-400
Prop PEP 20-500
Prop PEP 30-300
Prop PEP 30-350
Prop PEP 30-400
Prop PEP 30-150
Prop PEP 30-250
513
513
481
577
148
467
382
466
508
508
516
516
550
512
141
381
465
159
158
157
156
378
461
378
461
381
465
381
465
148
141
480
480
480
141
360
360
360
360
360
360
360
360
360
148
336
585
585
54
585
47
585
585
54
585
48
270
249
295
259
294
324
484
536
324
484
536
103443
103444
103518
103518
103606
103606
103606
103606
103606
103606
103607
103716
103718
103718
103718
103718
103718
103718
103718
103721
103724
103724
103724
103724
103724
103724
103737
103737
103740
103800
103844
103845
103850
103865
103868
103868
103871
103871
103874
103874
103877
103877
103886
103886
103889
103889
103892
103892
103898
103898
103903
103903
103906
103906
103915
103915
103918
103918
103922
103922
103925
103925
103928
103928
103929
103929
103932
Bolt ISO 4014 M8 x 190-8.8, galv.
Bolt ISO 4014 M8 x 190-8.8, galv.
Ladder UEL w. Hook
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
Ladder Hook, galv.
End Platform VARIO
563
563
137
558
87
208
251
297
273
289
468
265
249
295
270
259
287
393
437
265
248
294
270
259
287
393
141
498
559
204
137
137
140
149
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
135
494
149
637
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
548
548
548
548
549
549
549
549
549
549
548
256
566
439
558
567
255
151
151
49
55
43
257
174
151
418
418
414
414
414
174
418
383
51
56
148
148
203
176
251
279
297
272
261
289
547
88
383
369
87
72
85
85
392
362
362
362
362
451
451
451
451
451
86
72
466
450
Shoring Systems
Crane Eye BR 2,5 t
Bolt ISO 4014 M16 x 120-8.8, galv.
Bracket ASG 70-100
Router DW 625-E
Top Tie TRH
Base Spindle TRH
Base Spindle TRH
Guardrail TRH 180
Guardrail TRH 270
Prop PEP 10-400 A
Prop PEP 10-350 A
Prop PEP 10-300 A
Prop PEP 10-250 A
Climbing Systems
105311
105317
105318
105326
105327
105328
105330
105331
105346
105347
105367
105400
105400
105401
105402
105435
105448
105480
105484
105523
105524
105525
105791
105822
105823
105841
105842
105843
105844
105845
105905
105907
105925
105953
105978
105985
105986
106000
106000
106000
106000
106000
106000
106000
106000
106081
106087
106092
106092
106126
106126
106147
106148
106183
106429
106432
106433
106434
106582
106583
106585
106586
106587
106608
106608
106624
106626
Working Platforms
177
135
494
173
173
177
172
172
149
386
177
177
135
494
383
142
353
354
499
567
84
338
173
173
137
335
356
249
295
271
260
287
394
437
511
175
457
559
460
382
466
381
465
474
558
457
559
470
230
394
563
175
381
465
381
465
380
456
380
456
175
563
137
558
137
137
561
Bridge- and
Tunnel Formwork
FTF Spindle Guide
FTF 500 Bracket
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Bolt Ø 21 x 120
Tool Box TRH
FTF Assembly Device
Bolt ISO 4014 M20 x 120-8.8, galv.
SK Lead Cone DW 15
FTF Clamp
Ledger UH 50
Ledger UH 50
Ledger UH 25
Ledger UH 25
Bolt ISO 4014 M8 x 150-8.8, galv.
Bolt ISO 4014 M8 x 150-8.8, galv.
103942
103943
103943
103944
103945
103946
103949
103981
103992
103993
104017
104018
104027
104027
104029
104031
104031
104031
104031
104031
104032
104050
104070
104083
104096
104131
104131
104132
104132
104132
104132
104132
104132
104132
104181
104195
104278
104278
104305
104356
104356
104391
104391
104412
104477
104528
104528
104618
104643
104646
104647
104744
104762
104762
104766
104766
104779
104779
104780
104780
104803
104892
104929
104929
104930
104931
105032
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
106630
106661
106662
106663
106797
106877
106880
106931
106931
106939
106939
106965
106989
107002
107007
107008
107009
107019
107021
107152
107160
107161
107162
107169
107170
107171
107172
107173
107178
107185
107348
107448
107470
107472
107473
107474
107480
107481
107492
107493
107497
107498
107502
107503
107546
107579
107600
107601
107607
107608
107738
107738
107793
107801
107810
107815
107815
107820
107867
107867
107930
107977
107981
107986
108000
108010
108011
638
Bolt ISO 4014 M24 x 220-10.9, galv.
Wall Tension Anchor
Corner Platform TRP
Corner Handrail TRP
Tripod PEP 10
Connector MP-SRU
Bolt ISO 4014 M8 x 180-8.8, galv.
Coupling MPB 24
Angle TRH 180 x 6
Angle TRH 270 x 6
Angle TRH 180 x 15
Angle TRH 270 x 15
Ladder 240-360
Ladder 240-360
Landing TRP
Strap MPB 24
466
196
196
197
558
105
383
382
466
484
537
472
362
383
426
426
70
70
70
363
353
353
451
349
349
349
349
350
451
137
354
450
81
80
83
83
80
83
79
82
76
78
76
78
71
566
84
84
84
84
72
152
73
383
383
382
466
355
381
465
455
454
453
454
452
453
453
108034
108053
108068
108108
108114
108117
108120
108129
108129
108135
108135
108135
108135
108135
108135
108135
108136
108162
108172
108179
108189
108190
108191
108204
108213
108214
108218
108225
108339
108360
108380
108387
108412
108536
108540
108544
108566
108568
108689
108719
108785
108795
108808
108830
108834
108842
108855
108856
108869
108870
108958
108983
108984
108995
109010
109017
109105
109198
109208
109219
109469
109470
109471
109472
109563
109610
109612
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Kicker AV 210
Bearing Box BR
Guardrail Filler
Kicker TRH 135
Ladder TRH 264
Ladder TRH 354
Glue Component A-2
Stair Step UAR 100
End Step UAE 100
Bolt ISO 4014 M24 x 130-8.8, galv.
453
530
469
335
469
469
469
217
551
205
250
279
296
272
261
289
231
440
452
452
452
453
452
469
356
456
456
86
355
514
383
456
454
451
383
451
85
85
383
88
84
216
79
77
432
82
98
102
416
416
232
81
77
88
530
195
436
448
449
449
495
495
495
495
377
495
558
639
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
315
317
496
496
315
541
316
537
317
499
567
97
101
98
276
316
539
500
361
361
361
361
361
361
361
361
361
495
23
197
19
276
276
277
15
15
15
16
16
20
23
25
27
20
20
148
16
20
21
21
24
24
24
24
25
26
26
36
35
33
33
17
33
332
63
31
18
Shoring Systems
Extension GF 10
Extension GF 10
Bolt Ø 26 x 120
Bolt Ø 26 x 120
Shaft Panel DSE 125
PEP Frames PRK 62,5
PEP Frames PRK 75
PEP Frames PRK 150
PEP Frames PRK 225
PEP Frames PRK 230
PEP Frames PRK 266
PEP Frames PRK 296
Element MX 270 x 90
Element MX 270 x 45
Element MX 270 x 30
Element MX 90 x 240
Element MX 30 x 240
Element MX 120 x 90
Element MX 270 x 60
Element MX 120 x 60
Element MX 120 x 45
Element MX 120 x 30
Element MX 90 x 90
Element MX 90 x 60
Element MX 90 x 45
Element MX 90 x 30
Elements MX 60 x 60
Elements MX 60 x 45
Elements MX 60 x 30
Wingnut MX
Anchors MX 20-30
Anchors MX 30-40
Swivel Head SRU
TRIO Stripping Bar
TRIO Stripping Bar
Climbing Systems
111291
111379
111382
111390
111392
111392
111396
111396
111566
111567
111567
111603
111655
111665
111683
111738
111738
111806
111811
111812
111813
111814
111815
111816
111817
111818
111819
111833
111850
111866
111872
111957
111964
111975
112006
112022
112045
112078
112090
112104
112115
112126
112133
112143
112152
112159
112200
112221
112232
112239
112252
112259
112265
112271
112280
112286
112292
112338
112342
112386
112387
112419
112464
112498
112588
112588
112667
Working Platforms
376
497
495
497
313
255
255
254
254
500
501
312
312
313
314
426
469
500
469
469
469
469
313
137
563
560
313
232
380
456
106
331
497
312
469
314
314
559
559
437
223
90
232
552
312
90
227
214
498
315
541
497
379
462
482
377
447
447
447
446
446
352
355
287
146
386
497
Bridge- and
Tunnel Formwork
Spindle Head SRU
Prophead GFH, galv.
Spacer M20-82
Spacer M24-82
Shuttering Aid GFA
Traverse GFT
Wall Holder GFW
Guardrail GF 100
Glue Component B-2
Ledger UH 125
Ledger UH 125
Stopend Tie-2 DSA
Clamp GFK
Tension Sleeve GFO
Bolt ISO 4017 M12 x 140-8.8, galv.
Bolt ISO 4017 M12 x 240-8.8, galv.
Cone Spanner TRH
Cone Spanner TRH
Cone Spanner TRH
Sealing Cone TRH 55
Sealing Cone TRH 55
Tie Yoke SRU
Tie Yoke Head SRU
Locking Pin Ø 48
Locking Pin Ø 48
Locking Pin Ø 48
109630
109726
109743
109785
109910
109923
109924
109925
109926
110022
110023
110038
110040
110044
110045
110059
110076
110084
110160
110176
110208
110211
110238
110272
110272
110281
110326
110345
110347
110347
110406
110422
110477
110486
110526
110556
110595
110598
110599
110608
110612
110634
110634
110634
110646
110675
110675
110755
110756
110939
110939
111035
111053
111053
111053
111072
111087
111095
111103
111117
111124
111142
111142
111165
111238
111276
111283
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
112689
112715
112718
112726
112761
112765
112778
112782
112783
112788
112806
112813
112814
112815
112816
112822
112830
112837
112849
112850
112887
112888
112889
112918
112919
112920
112921
112926
112937
112937
112986
113007
113012
113018
113019
113183
113203
113246
113247
113247
113255
113255
113347
113348
113349
113350
113686
113744
113799
113829
113832
113833
113834
113835
113836
113837
113838
113839
113847
113933
114034
114036
114082
114084
114107
114107
114107
640
PEP Frames PRK 200
PEP Frames PRK 210
PEP Frames PRK 100
PEP Frames PRK 120
Spindle Spreader HD
Bottom Frame SRU/UZ
Connector SRU/UZ
Sealing Cone MX 55
Sealing Cone MX 55
Cone MX DR 22
Stacking Device MX
Bolt ISO 4014 M24 x 200-8.8, galv.
Frame MRK 180
Anchors MX 15-25
21
25
361
26
22
466
27
332
332
361
18
361
361
562
498
26
22
27
17
21
18
22
25
333
333
333
332
466
35
227
502
559
568
35
29
36
19
23
569
568
32
182
561
561
561
561
558
496
349
490
489
490
490
490
490
490
490
490
33
499
27
28
497
497
32
182
184
114124
114142
114142
114158
114158
114166
114179
114180
114181
114181
114191
114191
114212
114212
114248
114258
114290
114290
114299
114300
114301
114328
114349
114394
114426
114445
114452
114457
114464
114470
114478
114486
114496
114503
114509
114583
114595
114595
114607
114613
114613
114619
114621
114629
114629
114632
114632
114635
114638
114638
114641
114641
114641
114645
114645
114645
114648
114648
114648
114651
114651
114651
114654
114727
114731
114797
114797
Ledger UH 72
Stair Step UAR 125
End Step UAE 125
Element MX 330 x 90
Tie Rod Spanner MX
Tie Rod Spanner MX
Guardrail Post GKB
Edge Profile UH 100
Element MX 330 x 60
Element MX 330 x 45
Element MX 330 x 30
Stopper MX 50 MF
Stopper MX 50 OF
Stopper MX 84 MF
Ledger UH 50
Ledger UH 50
Ledger UH 25
Ledger UH 25
Stud Spanner MAXIMO
Edge Profile UH 125
Ledger UH 75
Ledger UH 75
Ledger UH 100
Ledger UH 100
Ledger UH 104
Ledger UH 125
Ledger UH 125
Ledger UH 150
Ledger UH 150
Ledger UH 150
Ledger UH 200
Ledger UH 200
Ledger UH 200
Ledger UH 250
Ledger UH 250
Ledger UH 250
Ledger UH 300
Ledger UH 300
Ledger UH 300
Ledger UH 400
Bolt ISO 4017 M20 x 100-8.8, galv.
463
23
19
433
407
495
448
449
23
19
23
19
23
19
10
11
34
551
517
34
501
501
449
14
10
11
11
12
12
12
13
13
34
34
34
14
379
455
14
379
455
35
449
379
455
379
455
463
379
455
379
463
455
379
463
455
379
463
455
379
455
463
455
559
449
35
232
641
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
584
584
153
561
559
558
560
133
562
558
558
558
558
559
559
558
560
559
558
558
560
560
136
432
565
558
559
563
559
558
558
486
486
565
558
569
418
419
565
560
187
560
560
486
457
561
558
569
486
565
561
562
561
560
569
561
561
558
558
405
568
457
558
558
558
564
561
Shoring Systems
Bolt ISO 4017 M20 x 40-8,8, galv.
Bolt ISO 4014 M20 x 200-8.8, galv.
End Plate SRZ
Bolt ISO 4014 M16 x 100-8.8, galv.
Bolt ISO 4014 M12 x 80-8.8, galv.
Bolt ISO 4014 M12 x 60-8.8, galv.
Bolt ISO 4014 M16 x 80-8.8, galv.
Bolt ISO 4017 M12 x 40-8.8, galv.
Bolt ISO 4017 M16 x 45-8.8, galv.
Bolt ISO 4014 M20 x 90-8.8, galv.
Bolt ISO 4017 M16 x 30-8.8, galv.
Bolt ISO 4014 M16 x 130-8.8, galv.
Bolt ISO 4014 M16 x 110-8.8, galv.
Bolt ISO 4014 M10 x 100-8.8, galv.
Bolt ISO 4017 M16 x 50-8.8, galv.
Bolt ISO 4017 M12 x 25-8.8, galv.
Bolt ISO 4014 M8 x 100-8.8, galv.
Bolt ISO 4014 M16 x 60-8.8, galv.
Cotter Pin 7, galv.
Nail 3 x 80
Bolt ISO 4014 M10 x 80-8.8, galv.
Cotter Pin 8, galv.
Bolt ISO 4014 M20 x 130-8.8, galv.
Bolt ISO 4014 M16 x 70-8.8, galv.
Bolt ISO 4014 M12 x 70-8.8, galv.
Bolt ISO 4014 M12 x 70-8.8, galv.
Bolt ISO 4014 M16 x 90-8.8, galv.
Bolt ISO 4014 M10 x 50-8.8, galv.
Climbing Systems
700845
700846
701991
706454
706458
706462
706488
710001
710139
710219
710220
710221
710222
710224
710225
710226
710229
710231
710232
710233
710234
710238
710240
710240
710240
710242
710252
710262
710266
710284
710285
710290
710293
710295
710299
710304
710312
710326
710326
710330
710334
710334
710336
710340
710381
710381
710593
710618
710702
710709
710874
710880
710886
711060
711063
711071
711074
711078
714093
715357
715585
720610
720610
721729
721817
722083
722086
Working Platforms
551
467
467
382
382
382
382
467
14
14
14
382
382
382
382
382
382
382
382
216
502
277
30
68
540
562
381
381
30
68
447
17
383
22
25
26
13
29
216
503
216
502
316
541
316
541
383
381
29
490
278
278
278
361
498
367
375
515
515
34
277
10
576
382
466
584
584
Bridge- and
Tunnel Formwork
Lifting Pin LICO
Eye Nut RCS DW 15
Eye Nut RCS DW 15
PEP Frames PRK 180
Plug MXM Ø 21
Spanner LICO
Angle Bracket 90°
114797
114811
114812
114818
114819
114820
114821
114825
114826
114842
114846
114892
114912
114916
114920
114924
114928
114932
114936
114997
114997
115019
115058
115058
115058
115145
115156
115157
115168
115168
115189
115255
115291
115299
115307
115315
115338
115350
115375
115375
115378
115378
115385
115385
115427
115427
115504
115513
115640
115739
115894
115895
115896
115980
116039
116081
116081
116233
116234
116353
116432
116454
123478
123483
123483
700843
700844
Service
Numerical Index
Formwork Girders
Wall Formwork
Column Formwork
Slab Formwork
Shoring Systems
Climbing Systems
Working Platforms
Bridge- and
Tunnel Formwork
Service
Numerical Index
722169
722318
722457
722859
723439
723910
724500
725462
725574
727056
727057
727058
727059
727060
727061
727112
727112
727112
727112
727165
727165
727165
730050
730050
730050
740251
740252
740252
740255
740255
740256
740257
740257
740270
740270
740271
740271
740273
740275
740276
740276
740277
740278
740279
740280
740280
740284
740284
740285
740286
740287
740308
740309
740310
740322
740323
740324
740454
740455
740456
740457
740458
740459
740460
740461
740462
740463
642
Bolt ISO 4014 M16 x 140-8.8, galv.
Bolt ISO 4014 M8 x 140-8.8, galv.
Crane Eye A18
EFD Paint red, 1 L
558
564
569
558
565
174
256
565
561
584
584
584
584
584
584
555
583
595
590
583
595
591
564
583
590
585
586
585
586
585
585
585
586
585
586
585
586
585
585
586
585
585
585
585
585
586
586
585
585
585
585
585
585
585
586
585
585
591
591
591
591
591
591
591
591
591
591
740464
740465
740467
740468
740469
740497
740498
740499
740522
740523
740524
740525
740526
740527
740528
740529
740531
740770
745300
745303
745305
745319
745321
745322
745323
745324
745324
745329
745340
745341
745342
745343
745344
745345
745346
745347
745348
745349
745560
745560
745569
745570
745580
745645
750040
750076
750076
750132
750133
750134
750135
750303
750303
750303
750330
750350
780155
780302
780304
780305
780305
780353
780354
780356
780357
780702
781053
Fin-Ply 18 mm TE 270/2, TAE 270/2
Fin-Ply 18 mm TE 270/2, TAE 270/2
Fin-Ply 18 mm TR/4 330 x 120
Fin-Ply 18 mm TE 60
Bolt ISO 4014 M12 x 100-8.8, galv.
Bolt ISO 4014 M16 x 160-8.8, galv.
Bolt ISO 4017 M20 x 50-8.8, galv.
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
591
586
585
585
585
586
585
585
585
585
586
586
586
586
586
586
586
586
586
586
586
586
585
586
585
585
585
586
584
513
565
584
584
584
584
69
268
584
558
561
558
564
564
564
595
559
561
561
559
561
561
Bridge- and
Tunnel Formwork
Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Bolt ISO 4014 M20 x 160-8.8, galv.
781054
Formwork Girders
558
643
Service
Numerical Index
644
645
PERI International
42
19
20
22
32
34
18
38
11
52
6
01 PERI GmbH
Rudolf-Diesel-Strasse
89264 Weissenhorn
info @ peri.com
www.peri.com
21
1
5
17
2
46
30
3
16
13
29
28
9
53
24
48
4
41
61
33
02 France
PERI S.A.S.
77109 Meaux Cedex
[email protected]
www.peri.fr
09 Italy
PERI S.p.A.
20060 Basiano (MI)
[email protected]
www.peri.it
16 Austria
PERI Ges.mbH
3134 Nußdorf ob der Traisen
offi[email protected]
www.peri.at
23 Korea
PERI (Korea) Ltd.
Seoul 135-080
[email protected]
www.perikorea.com
29 Slovania
PERI SLOWENIEN
2000 Maribor
[email protected]
www.peri.de
03 Switzerland
PERI AG
8472 Ohringen
[email protected]
www.peri.ch
10 Japan
PERI Japan K.K.
Tokyo 103-0015
[email protected]
www.perijapan.jp
17 Czech Republic
PERI spol. s r.o.
252 42 Jesenice
[email protected]
www.peri.cz
24 Portugal
PERIcofragens Lda.
Linda-a-Pastora
2790-326 Queijas
[email protected]
www.peri.pt
30 Slovakia
PERI spol. s r.o.
903 01 Senec
[email protected]
www.peri.sk
04 Spain
PERI S.A. Sociedad
Unipersonal
28110 Algete/Madrid
[email protected]
www.peri.es
11 United Kingdom/Ireland
PERI Ltd.
Rugby, CV23 0AN
[email protected]
www.peri.ltd.uk
18 Denmark
PERI Danmark A/S
2670 Greve
[email protected]
www.peri.dk
05 Belgium/Luxembourg
N.V. PERI S.A.
1840 Londerzeel
[email protected]
www.peri.be
12 Turkey
PERI Kalıp ve İskeleleri
Kıraç - Büyükçekmece/
Istanbul 34500
[email protected]
www.peri.com.tr
19 Finland
PERI Suomi Ltd. Oy
05460 Hyvinkää
info@perisuomi.fi
www.perisuomi.fi
06 Netherlands
PERI B.V.
5480 AH-Schijndel
[email protected]
www.peri.nl
13 Hungary
PERI Kft..
1181 Budapest
[email protected]
www.peri.hu
14 Malaysia
07 USA
PERI Formwork Malaysia
PERI Formwork Systems, Inc.
43300 Seri Kembangan,
Elkridge, MD 21075
Selangor DE
[email protected]
[email protected]
www.peri-usa.com
www.perimalaysia.com
08 Indonesia
PT Beton Perkasa Wijaksana 15 Singapore
PERI ASIA Pte. Ltd
Jakarta 10210
Singapore 387355
[email protected]
[email protected]
www.peri.de
www.periasia.com
646
20 Norway
PERI NORGE AS
3036 Drammen
[email protected]
www.peri.no
21 Poland
PERI Polska Sp. z o.o.
05-860 Płochocin
[email protected]
www.peri.pl.pl
22 Sweden
PERIform SVERIGE AB
30013 Halmstad
[email protected]
www.periform.se
25 Argentina
PERI S.A.
(1625) Escobar/Prov. Bs. As.
[email protected]
www.peri.com.ar
26 Brazil
PERI Formas e
Escoramentos Ltda.
CEP 06730-000
Vargem Grande Paulista
São Paulo
[email protected]
www.peribrasil.com.br
27 Chile
PERI Chile Ltda.
Colina, Santiago de Chile
[email protected]
www.peri.cl
28 Romania
PERI România SRL
077015 Baloteşti - ILFOV
[email protected]
www.peri.ro
31 Australia
PERI Australia Pty. Ltd.
Glendenning NSW 2761
[email protected]
www.periaus.com.au
32 Estonia
PERI AS
76401 Saku vald
Harjumaa
[email protected]
www.peri.ee
33 Greece
PERI Hellas Ltd.
194 00 Koropi
[email protected]
www.perihellas.gr
34 Latvia
PERI SIA
1057 Riga
[email protected]
www.peri-latvija.lv
35 United Arab Emirates
PERI (L.L.C.)
Dubai
[email protected]
www.perime.com
12
44
36
43
7
50
39
60
49
47
23
51
37
40 57
56
54
58
59
35
10
55
63
14
15
8
26
62
27
31
45
25
42 Iceland
36 Canada
MEST ltd.,
PERI Formwork Systems, Inc.
220 Hafnarfjordur
Bolton, Ontario
[email protected]
L7E 1K1
www.mest.is
[email protected]
www.peri.ca
43 Kazakhstan
TOO PERI Kazakhstan
37 Libanon
050010 Almaty
PERI GmbH
[email protected]
Beirut
www.peri.kz
P.O. Box 90 416 Jdeidet
[email protected]
44 Russian Federation
www.peri.de
OOO PERI
142403 Noginsk
38 Lithuania
[email protected]
PERI UAB
www.peri.ru
02300 Vilnius
[email protected]
45 South Africa
www.peri.lt
PERI Wiehahn (Pty.) Ltd.
Bellville 7535
39 Marocco
[email protected]
PERI S.A.
www.periwiehahn.co.za
Tanger
[email protected]
46 Ukraine
www.peri.de
TOW PERI Ukraina
07400 Brovary
40 Israel
[email protected]
PERI Formwork
www.peri.ua
Engineering Ltd
49002 Israel
47 Egypt
[email protected]
PERI GmbH
www.peri.co.il
11361 Heliopolis
Cairo
41 Bulgaria
[email protected]
PERI BULGARIA EOOD
www.peri.com.eg
1839 – Sofia
[email protected]
48 Serbia
www.peri.bg
PERI Oplate d.o.o.
11070 Novi Beograd
offi[email protected]
www.peri.co.yu
49 Mexico
PERI Cimbras y Andamios,
S.A. de C.V.
Estado de México,
C.P. 54680
[email protected]
www.peri.com.mx
50 Azerbaijan
Baku
[email protected]
www.peri.com.tr
51 Turkmenistan
744035 Aşgabat
[email protected]
www.peri.com.tr
52 Belorussia
PERI Belarus
220030 Minsk
[email protected]
www.peri.com.tr
53 Croatia
PERI oplate i skele d.o.o.
10 250 Donji Stupnik/
Zagreb
[email protected]
www.peri.com.hr
54 Iran
PERI GmbH
Building No. 4
P.O. Box 1939793669
Teheran-Iran
[email protected]
www.peri.ir
55 India
PERI (India) Pvt Ltd
Mumbai – 400064
[email protected]
www.peri.in
62 Peru
PERI Peruana SAC
Lima/Peru
[email protected]
www.peri.com.pe
56 Jordan
PERI Jordan
11947 Amman
[email protected]
www.peri.de
63 Panama
PERI Panama Inc.
587 Panama City
[email protected]
www.peri.com.pa
57 Kuwait
PERI Kuwait
13011 Kuwait
[email protected]
www.peri.de
58 Saudi Arabia
PERI Saudi Arabia
Jeddah - 21463
K.S.A
[email protected]
www.peri.de
59 Qatar
PERI Qatar LLC
Doha
[email protected]
www.peri.de
60 Algeria
Société PERI S.A.S.
Kouba - Alger
[email protected]
www.peri.fr
61 Albania
Autostrada TIRANE-DURRES
Tirane / ALBANIA
[email protected]
www.peri.com.tr
647
Wall Formwork
Panel Formwork
Girder Formwork
Circular Formwork
Facade Formwork
Brace Frame
Climbing Systems
Climbing Scaffold
Self-Climbing System
Climbing Protection Panel
Platform Systems
Column Formwork
Square
Rectangular
Circular
Scaffold, Stairways,
Working Platforms
Facade Scaffold
Working Platform
Weather Protection Roof
Stairway Access
Slab Formwork
Panel Formwork
Beam Grid Formwork
Girder Formwork
Slab Table
Beam Formwork
Bridge and Tunnel
Formwork
Cantilevered Parapet Carriage
Cantilevered Parapet Platform
Engineer’s Construction Kit
Shoring Systems
Steel Slab Props
Aluminium Slab Props
Tower Systems
Heavy-Duty Props
Services
Formwork Assembly
Cleaning / Repairs
Formwork Planning
Software
Statics
Special Constructions
Additional Systems
Plywood
Formwork Girders
Stopend Systems
Pallets
Transportation Containers
PERI GmbH
Formwork Scaffolding Engineering
P.O. Box 1264
89259 Weissenhorn
Germany
Tel +49 (0)73 09.9 50- 0
Fax +49 (0)73 09.9 51- 0
[email protected]
www.peri.com
D e 11/2009 10ma Art.-Nr.: 792576 © Copyright by PERI GmbH
PERI Product Range

Formwork Component Catalogue

Transcription

Similar documents

SKYDECK Panel Slab Formwork

HD 200 Heavy-Duty Prop Heavy-duty support system with 200

MULTIPROP Aluminium Post Shores – low weight with high

SKYDECK The proven, fast slab formwork made of high

Katalog 2006 ohne Preise-web - G. Kropfelder Baubedarf GmbH

Climbing Systems CB 240 and CB 160 Safe working

Trade Price List - southfieldgroup.co.uk

PEP – PERI Euro Prop Props with well

GRV Circular Formwork Tie-less Circular Formwork with

Die BUCHSTAVIER - Das Dosierte Leben