One Step Rod Cutter - Section 8

ONE STEP ROD CUTTER
ONE STEP PARTS LIST (1988–1990)
Parts List
Item No.
1.
Obsolete No.
Order No.
Description
2.
3.
4.
80000
800100
900099
227-23
215-209
800000*
116001
900099
120002
990080
Three-Point Hitch
Three-Point Pin
Main Frame
Tire and Wheel (obsolete, requires kit # 405020)
Wheel Axle
5.
6.
435-39
313-348
900249*
990173
Wheel Mounting Assembly
Wheel Guard Spacer
7.
8.
9.
10.
210-268
240-691
240-635
900003
900361*
900317*
900357*
900003
Pickup Head Roller
Hex Roller
4" Rear Roller
Finger Shaft (1677/8”)
900004
504-67
461-41
461-40
461-33
900004
106000
103001
103000
119027
15.
16.
17.
18.
19.
461-34
504-68
118-3
118-4
20-1911
119028
118015
103023
103024
900243*
20.
21.
22.
23.
24.
20-1907
132-427
20-2879
900019-R
900019-L
900572
103044
900334
900019-R
900019-L
25.
26.
27.
28.
29.
313-445
313-446
SP50BS60
SP50BS15
SP40BS26
900377
No longer mfg.
119008
119006
119003
Rotor Rod Spacer, R.H.
Rotor Rod Spacer, L.H.
Sprocket, Pickup Head R.H.
Sprocket, Hex Tube R.H.
Sprocket, Hex Tube L.H.
30.
31.
32.
33.
34.
SP40BS15
SP50BS13
13-72
13-39
313-410
119004
119010
106004
106013
900570
Sprocket, Pickup Head L.H.
Sprocket Idler
Flangett 52 MS
Flangett 52 MST
Spacer Hinge
11.
12.
13.
Not Shown
14.
Finger Shaft (1677/8”)
Rubber Finger
Cam Track–Right Hand
Cam Track–Left Hand
Spider Cast End
Spider Cast Center
Rotor Rod
Clip, 3-hole Rotor Rod
Clip, 2-hole Rotor Rod
Rotor Rod Mount
Right Hand Hinge Bracket}Replaced by 900573
Cam Arm
Idler Sprocket Mount
End Plate–Right Hand
End Plate–Left Hand
* This part is manufactured on a built-to-order basis only. Call Pickett Equipment for availability and lead time.
1988-1990
3
ONE STEP ROD CUTTER
ONE STEP PARTS LIST (1988–1990)
Parts List
Item No.
Obsolete No.
Order No.
35.
36.
37.
38.
39.
124-24
237-360
CO4020
202-20
900120
102005
103012
103007
102005
900120*
40.
41.
42.
43.
44.
684-41
900023-B*
900020*
900026
900027
103039
900565
900950
900461–188
900027
900022*
900026
900028
900029
900030
900407-R
Not Shown
Not Shown
Not Shown
Not Shown
45.
Description
1” Lock Collar (See Item 38)
Chain, #50 Roller 38 Links
Chain, #40 Roller 20 Links
1” Bearing Insert with Lock Collar
Guy Rods Front and Rear
Proof Coil Chain 3/16”
Chain Case Shank R.H. (♦See Note)
End Shank Slotted (♦See Note)
Cutter Rod 1” Solid
Kicker Rod 83”–8-22 Drive
Kicker Rod 85”–8-22 End
Kicker Rod 55½”–6-30
Kicker Rod 57½”–6-30
Kicker Rod 57½”–6-30
Single Hole Shank (♦See Note)
46.
47.
48.
49.
DS208TT6
P3Y216E3
900021*
900118
102000
102016
900950
900413
900414
Bearing 1” Square
Bearing 2-Hole Flange
Center Double–Hole Shank (♦See Note)
Shroud, Left–Hand
Shroud, Right–Hand
51.
52.
54.
REC-197
¾” × 9”
118000
900316
106009
Rod End
Outer Chain Guard
Bolt ¾” × 9”–Grade 8
56
57.
132-427
200-107
103044
102015
Cam Arm
Bearing Cam with 5/8” Jam Nut & Washer
To use shanks no.’s 900565, 900950, 900407-R, contact Pickett Equipment or your local dealer for conversion
update information.
*This part is manufactured on a built-to-order basis only. Call Pickett Equipment for availability and lead time.
Conversion Kits available for this machine (See Service Update Section)
Kit No.
Description
Kit No.
405021
Gauge Wheel Conversion Kit
(converts model ’88–’91 to ’92)
Center Dump Table Kit**
(converts model-’91–’92 to ’93)
Semi-end Table Kit**
(converts model ’91–’92 to ’93)
Shank Point Conversion Kit
(shear point)
900800-822
Chain Case Update (8 row 22”)
900800-630
Chain Case Update (6 row 30”)
901246
Pick up Head Conversion Kit
Obsolete Kit No. UPH 940003 (6 row 30” & 8 row 22”)
900606
Shank Point Conversion Kit
(45° rock point)
405020
Small Wheel Conversion Kit
900754
900755
900605
Description
** Also used in conjunction with kit no. 405022 & 405023 to convert models ’91–‘92 to ’93.
4
1988-90
ONE STEP ROD CUTTER
COMPLETE PICKUP HEAD ASSEMBLY–(1991 to 1993)
6 Row 30” & 8 Row 22”
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
900360
900359
119070
119068
119071
Finger Rod–Long, 86¾”
Finger Rod–Short, 84¾”
Shaft, Finger Rod Plug Left (Short)
Shaft, Finger Rod Plug Left (Long)
Shaft, Finger Rod Right (Short)
6.
7.
8.
9.
10.
119069
106002
102035
106000
900400*
Shaft, Finger Rod Plug Right (Long)
Flangett, 2-Hole
Bearing, UHMW Split Center (White)
Finger, Rubber (176 per machine)
Pickup Tube Assembly–with spiders
11.
12.
13.
14.
15.
103044
102015
102034
103000
103001
Cam Arm
Bearing, Cam
Bearing, UHMW End (Black)
Cam, LH Track
Cam, RH Track
16.
17.
18.
19.
20.
900220-A
900221-A
900402
900401
900203
2-Hole Spider
4-Hole Spider
4” Roller
Hex Roller
Rotor Rod Mount
900470
Complete Pickup Head Assembly } Replaced by 900869
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
7/16”
F.
G.
H.
¼” NC Nyloc Hex Nut
5/16” NC Whiz Nut
5/16” × 1½” NC Hex Bolt
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
5/8” NF Jam Hex Nut
5/8” Flat Washer
¼” × ¾” NC Carriage Bolt
7/16”
* This part is manufactured on a built-to-order basis only. Call Pickett Equipment for availability and lead time.
Conversion Kits available for this machine (See Service Update Section)
Kit No.
Description
901246
Pick Up Head Conversion Kit (6 Row 30” and 8 Row 22”)
Obsolete No. UPH 940003
1991–1993
7
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–4 Row 30 (1994–1995)
Parts List
Item No
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119071
119069
900940
Cam Arm
Bearing, Cam Arm
Shaft, R.H. Short Finger Rod Stub
Shaft, R.H. Long Finger Rod Stub
Finger Rod 293/8”, 4 Required per P.U.H.
6.
7.
8.
9.
10.
900866
106000
900859
900858
900857
Finger Rod 373/8”, 8 Required per P.U.H.
Finger, Rubberized–112 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
900068
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Rotor Rod Mount
16.
17.
18.
Not Shown
Not Shown
900977
900060
900064
900978
900860
Pickup Tube with Four Spiders
4” Roller
Hex Roller
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
Not Shown
900861
4-Hole Center Spider (sold in pairs)
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
5/16”
G.
H.
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5
For use on Fingers only
5/16” NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
For use on all couplers and stub shafts
9
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY—4 Row 36 (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
901130
901124
901127
901122
900940
Rotor Rod Mount
Pickup Tube with 5 spiders
Hex Roller
4” Roller
Finger Rod 293/8”, 8 required per P.U.H.
900897
901125
900860
900861
Finger Rod 333/8”, 8 required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
5/16”
G.
H.
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5
For use on Fingers only
5/16” NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
for use on all couplers and stub shafts
11
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 28 (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized–160 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900958
900952
900955
900949
900866
Rotor Rod Mount
Pickup Tube with 5 Spiders
Hex Roller
4” Roller
Finger Rod, 373/8”–12 Required per P.U.H.
900867
900953
900860
900861
Finger Rod, 413/8”–4 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
5/16”
G.
H.
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5
For use on Fingers only
5/16” NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
for use on all couplers and stub shafts
13
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 30 & 8 Row 22 (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized–172 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900203
900868
900401
900402
900866
Rotor Rod Mount
Pickup Tube with 5 Spiders
Hex Roller
4” Roller
Finger Rod, 373/8” - 4 Required per P.U.H.
900867
900869
900860
900861
Finger Rod, 413/8”–12 Required per P.U.H
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
5/16”
G.
H.
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5
For use on Fingers only
5/16” NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
For use on all couplers and stub shafts
15
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 36 (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized–208 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900799
900964
900771
900773
900792
Rotor Rod Mount
Pickup Tube with 7 Spiders
Split Hex Roller–Short }Replaced by 901290
Split 4” Roller–Short }Replaced by 901289
Split Hex Roller–Long}Replaced by 901290
21.
22.
23.
24.
25.
900790
900766
900760
900765
102065
Split 4” Roller–Long }Replaced by 901289
Shaft, 6-Splined Coupler
Bearing Mount Plate }Replaced by 901277
Split Roller Mount
Bearing, 13/8” Split Roller with 2 Snap Rings }Replaced by 102080
900940
900897
900965
900860
900861
Finger Rod, 293/8”–8 Required per P.U.H.
Finger Rod, 333/8”–16 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
26.
27.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
(for use on all couplers and stub shafts)
5/16”
17
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 38 (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—220 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900820
900946
900771
900773
900812
Rotor Rod Mount
Pickup Tube with 7 Spiders
Split Hex Roller–Short }Replaced by 901292
Split 4” Roller–Short }Replaced by 901291
Split Hex Roller–Long }Replaced by 901292
21.
22.
23.
24.
25.
900810
900766
900760
900765
102065
Split 4” Roller–Long }Replaced by 901291
Shaft, 6-Splined Coupler
Bearing Mount Plate }Replaced by 901277
Split Roller Mount
Bearing, 13/8” Split Roller with 2 Snap Rings }Replaced by 102080
26.
27.
28.
Not Shown
Not Shown
900940
900897
900866
900945
900860
Finger Rod, 293/8”—4 Required per P.U.H.
Finger Rod, 333/8”—12 Required per P.U.H.
Finger Rod, 373/8”—8 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
Not Shown
900861
4-Hole Center Spider (sold in pairs)
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
for use on all couplers and stub shafts
5/16”
19
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–8 Row 30 (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—232 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900780
900969
900771
900773
900770
Rotor Rod Mount
Pickup Tube with 7 Spiders
Split Hex Roller–Short }Replaced by 901294
Split 4” Roller–Short }Replaced by 901293
Split Hex Roller–Long }Replaced by 901294
21.
22.
23.
24.
25.
900772
900766
900760
900765
102065
Split 4” Roller–Long }Replaced by 901293
Shaft, 6-Splined Coupler
Bearing Mount Plate }Replaced by 901277
Split Roller Mount
Bearing, 13/8” Split Roller with 2 Snap Rings }Replaced by 102080
900897
900866
900970
900860
900861
Finger Rod, 333/8”–8 Required per P.U.H.
Finger Rod, 373/8”–16 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
26.
27.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1994–1995
7/16”
7/16”
x 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
(for use on all couplers and stub shaft)
5/16”
21
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–10 Row 20” (1994–1995)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—192 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
905128
900971
905125
905123
900940
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Finger Rod, 293/8”—24 Required per P.U.H.
900972
900860
900861
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole End Spider (sold in pairs)
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
5/16”
G.
H.
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5
For use on Fingers only
5/16” NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
For use on all couplers and stub shafts
23
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–12 Row 22” (1994–1995)
PARTS LIST
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—256 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900878
900974
900771
900773
900886
Rotor Rod Mount
Pickup Tube with 7 Spiders
Split Hex Roller–Short }Replaced by 901296
Split 4” Roller–Short }Replaced by 901295
Split Hex Roller–Long }Replaced by 901296
21.
22.
23.
24.
25.
900884
900766
900760
900765
102065
Split 4” Roller–Long }Replaced by 901295
Shaft, 6-Splined Coupler
Bearing Mount Plate }Replaced by 901277
Split Roller Mount
Bearing, 13/8” Split Roller with 2 Snap Rings }Replaced by 102080
26.
27.
Not Shown
Not Shown
Not Shown
900866
900867
900975
900860
900861
Finger Rod, 373/8”—8 Required per P.U.H.
Finger Rod, 413/8”—16 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole End Spider (sold in pairs)
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1994–1995
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shafts)
5/16”
25
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–4 Row 30 (1996)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119071
119069
900940
Cam Arm
Bearing, Cam Arm
Shaft, R.H. Short Finger Rod Stub
Shaft, R.H. Long Finger Rod Stub
Finger Rod 293/8”, 4 Required per P.U.H.
6.
7.
8.
9.
10.
900866
106000
900859
900858
900857
Finger Rod 373/8”—8 Required per P.U.H.
Finger, Rubberized—112 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
900068
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Rotor Rod Mount
16.
17.
18.
Not Shown
Not Shown
900977
900060
900064
900978
900860
Pickup Tube–with Four Spiders
4” Roller
Hex Roller
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
Not Shown
900861
4-Hole Center Spider (sold in pairs)
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (For use on all couplers and stub shafts)
5/16”
27
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–4 Row 36 (1996)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
901130
901124
901127
901122
900940
Rotor Rod Mount
Pickup Tube with 5 spiders
Hex Roller
4” Roller
Finger Rod 293/8”—8 required per P.U.H.
900897
901125
900860
900861
Finger Rod 333/8”—8 required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
for use on all couplers and stub shafts
5/16”
29
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 28 (1996)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—160 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert w/Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900958
900952
900955
900949
900866
Rotor Rod Mount
Pickup Tube with 5 Spiders
Hex Roller
4” Roller
Finger Rod, 373/8”—12 Required per P.U.H.
21.
Not Shown
Not Shown
Not Shown
900867
900953
900860
900861
Finger Rod, 413/8”—4 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
for use on all couplers and stub shafts
5/16”
31
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 30 & 8 Row 22 (1996)
PARTS LIST
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—172 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
16.
17.
18.
19.
20.
900203
900868
900401
900402
900866
Rotor Rod Mount
Pickup Tube with 5 Spiders
Hex Roller
4” Roller
Finger Rod, 373/8”—4 Required per P.U.H.
900867
900869
900860
900861
Finger Rod, 413/8”—12 Required per P.U.H
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shafts)
5/16”
33
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 36 (1996)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—208 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
900799
900964
901290
901289
900965
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
4” Roller Bearing Mount Plate
Split Roller Mount
Roller Carrier Bearing
26.
27.
900940
900897
Finger Rod, 293/8”–8 Required per P.U.H.
Finger Rod, 333/8”–16 Required per P.U.H.
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
(For use on all couplers and stub shafts)
5/16”
35
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–6 Row 38 (1996)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—220 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
900820
900946
901292
901291
900945
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
4” Roller Bearing Mount Plate
Split Roller Mount
Roller Carrier Bearing
26.
27.
28.
900940
900897
900866
Finger Rod, 293/8”—4 Required per P.U.H.
Finger Rod, 333/8”—12 Required per P.U.H.
Finger Rod, 373/8”—8 Required per P.U.H.
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shafts)
5/16”
37
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–8 Row 30 (1996)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—232 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
900780
900969
901294
901293
900970
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
4” Roller Bearing Mount Plate
Roller Carrier Mount
Roller Carrier Bearing
26.
27.
900897
900866
Finger Rod, 333/8”—8 Required per P.U.H.
Finger Rod, 373/8”—16 Required per P.U.H.
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shaft)
5/16”
39
ONE STEP ROD CUTTER
PICKUP HEAD ASSEMBLY–12 Row 22” (1996)
PARTS LIST
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103044
102015
119070
119068
119071
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Rod Stub
Shaft, L.H. Long Finger Rod Stub
Shaft, R.H. Short Finger Rod Stub
6.
7.
8.
9.
10.
119069
106000
900859
900858
900857
Shaft, R.H. Long Finger Rod Stub
Finger, Rubberized—256 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103001
103000
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, R.H. Track
Cam, L.H. Track
900878
900974
901296
901295
900975
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole End Spider (sold in pairs)
4” Roller Bearing Mount Plate
Roller Carrier Mount
Roller Carrier Bearing
26.
27.
900866
900867
Finger Rod, 373/8”—8 Required per P.U.H.
Finger Rod, 413/8”—16 Required per P.U.H.
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer
F.
G.
H.
5/16”
1996
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8
(for use on all couplers and stub shafts)
5/16”
41
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–4 Row 30 (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119136
119134
900940
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, R.H. Short Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 293/8”—4 Required per P.U.H.
6.
7.
8.
9.
10.
900866
106000
900859
900858
900857
Finger Rod 373/8”—8 Required per P.U.H.
Finger, Rubberized—112 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
900068
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Rotor Rod Mount
16.
17.
18.
Not Shown
Not Shown
900977
900060
900064
900978-97
900860
Pickup Tube–with Four Spiders
4” Roller
Hex Roller
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
Not Shown
900861
4-Hole Center Spider (sold in pairs)
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (For use on all couplers and stub shafts)
5/16”
43
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–4 Row 36 (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
16.
17.
18.
19.
20.
901130
901124
901127
901122
900940
Rotor Rod Mount
Pickup Tube with 5 spiders
Hex Roller
4” Roller
Finger Rod 293/8”—8 required per P.U.H.
900897
901125-97
900860
900861
Finger Rod 333/8”—8 required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
x 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (For use on all couplers and stub shafts)
5/16”
45
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–6 Row 28 (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized—160 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
16.
17.
18.
19.
20.
900958
900952
900955
900949
900866
Rotor Rod Mount
Pickup Tube with 5 Spiders
Hex Roller
4” Roller
Finger Rod, 373/8”—12 Required per P.U.H.
900867
900953-97
900860
900861
Finger Rod, 413/8”—4 Required per P.U.H.
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shafts)
5/16”
47
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY—6 Row 30 & 8 Row 22
(1997-Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized—172 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
16.
17.
18.
19.
20.
900203
900868
900401
900402
900866
Rotor Rod Mount
Pickup Tube with 5 Spiders
Hex Roller
4” Roller
Finger Rod, 373/8”—4 Required per P.U.H.
900867
900869-97
900860
900861
Finger Rod, 413/8”—12 Required per P.U.H
Complete Pickup Head Assembly
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
21.
Not Shown
Not Shown
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (For use on all couplers and stub shafts)
5/16”
49
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–6 Row 36 (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized—208 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
900799
900964
901290
901289
900965-97
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
4” Roller Bearing Mount Plate (Optional)
Split Roller Mount (Optional)
Roller Carrier Bearing (Optional)
26.
27.
28.
29.
Not Shown
900940
900897
901025
900762
900769
Finger Rod, 293/8”—8 Required per P.U.H.
Finger Rod, 333/8”—16 Required per P.U.H.
Rotor Rod Support Guide
Rotor Rod Support Connection
Rotor Rod Support (weld-on bracket)
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shafts)
5/16”
51
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–6 Row 38 (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized—220 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
900820
900946
901292
901291
900945-97
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
4” Roller Bearing Mount Plate (Optional)
Split Roller Mount (Optional)
Roller Carrier Bearing (Optional)
26.
27.
28.
29.
30.
900940
900897
900866
900762
901025
Finger Rod, 293/8”—4 Required per P.U.H.
Finger Rod, 333/8”—12 Required per P.U.H.
Finger Rod, 373/8”—8 Required per P.U.H.
Rotor Rod Support Connection
Rotor Rod Support Guide
Not Shown
900769
Rotor Rod Support (weld-on bracket)
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (For use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (For use on all couplers and stub shafts)
5/16”
53
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–8 Row 30 (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized—232 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
900780
900969
901294
901293
900970-97
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole Center Spider (sold in pairs)
4” Roller Bearing Mount Plate (Optional)
Roller Carrier Mount (Optional)
Roller Carrier Bearing (Optional)
26.
27.
28.
29.
Not Shown
900897
900866
901025
900762
900769
Finger Rod, 333/8”—8 Required per P.U.H.
Finger Rod, 373/8”—16 Required per P.U.H.
Rotor Rod Support Guide
Rotor Rod Support Connection
Rotor Rod Support (weld-on bracket)
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shaft)
5/16”
55
ONE STEP ROD CUTTER
4 TUBE PICKUP HEAD ASSEMBLY–12 Row 22” (1997–Present)
Parts List
Item No.
Part No.
Description
1.
2.
3.
4.
5.
103095
102015
119137
119135
119136
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
6.
7.
8.
9.
10.
119134
106000
900859
900858
900857
Shaft, R.H. Long Finger Offset
Finger, Rubberized—256 Per machine
Center Spider Stub Shaft–Short
Center Spider Stub Shaft–Long
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
900709
103096
103096
Flangett, 2-Hole
Bearing, 1” Insert with Lock Collar
Spacer, Pickup Head
Cam, Track (Universal)
Cam, Track (Universal)
900878
900974
901296
901295
900975-97
Rotor Rod Mount
Pickup Tube with 7 Spiders
Hex Roller
4” Roller
Complete Pickup Head Assembly
21.
22.
23.
24.
25.
900860
900861
901277
900765
102080
2-Hole End Spider (sold in pairs)
4-Hole End Spider (sold in pairs)
4” Roller Bearing Mount Plate (Optional)
Roller Carrier Mount (Optional)
Roller Carrier Bearing (Optional)
26.
27.
28.
29.
Not Shown
900866
900867
901025
900762
900769
Finger Rod, 373/8”—8 Required per P.U.H.
Finger Rod, 413/8”—16 Required per P.U.H.
Rotor Rod Support Guide
Rotor Rod Support Connection
Rotor Rod Support (weld-on bracket)
16.
17.
18.
19.
Not Shown
Hardware List
Item No.
Part No.
Description
A.
B.
C.
D.
E.
× 3” NC Hex Bolt–Grade 8
NC Nyloc Hex Nut
1” SAE Flat Washer
5/8” NF Jam Nut
5/8” Shim Washer (optional)
F.
G.
H.
5/16”
1997–Present
7/16”
7/16”
× 1½” NC Hex Bolt–Grade 5 (for use on fingers only)
NC Whiz Nut
5/16” × 1½” NC Hex Bolt–Grade 8 (for use on all couplers and stub shafts)
5/16”
57
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (4 ROW 30) 1997–Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900940
8
8
4
4
8
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 293/8” (8 holes)
6.
7.
7a.
8.
9.
900866
106036
106052
901412
901420
16
224
0
8
0
16
32Pr.
32
2
2
Finger Rod 373/8” (10 holes)
Finger, with radius (8 Tube Pick Up Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2 Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (329/32” Lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
900068
901442
900060
900064
900861
1
1
1
1
4
Rotor Rod Mount (120¾”)
Pickup Tube (with 4 Spiders) (1143/16”)
4” Roller (1187/8”)
Hex Roller (1163/8”)
8-Hole Spider
Not Shown
901443
1
Complete 8 Tube Pickup Head Assembly (1143/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4¾” keyway)
Not Shown
Not Shown
Not Shown
900063
900044
900045
1
1
1
Hex Roller Carrier (L.H. end 2½” keyway)
1” Pickup Head Carrier (Drive-end keyed)
1” Pickup Head Carrier (Idler-end no key)
Part No.
Qty
Description
7/16”
106051
106051
8
8
8
48
48
176
176
5/16”
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
Revised February, 2014
× 3” NC Hex Bolt–Grade 8
NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt
7/16”
5/16”
× 1½” NC Hex Bolt–Grade 5 (use on fingers only)
NC Whiz Nut (use on fingers only)
59
ONE STEP ROD CUTTER
8-TUBE PICKUP HEAD ASSEMBLY (4 ROW 36) 1997–Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900940
8
8
4
4
16
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 293/8” (8 holes)
6.
7.
7a.
8.
9.
900897
106036
106052
901412
901420
16
272
0
8
0
24
40Pr.
40
2
2
Finger Rod 333/8” (9 holes)
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (329/32” lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
901130
901437
901122
901127
900861
1
1
1
1
4
Rotor Rod Mount (144¾”)
Pickup Tube (with 5 Spiders) (1383/16”)
4” Roller (1427/8”)
Hex Roller (1403/8”)
8-Hole Spider
Not Shown
901438
1
Complete 8-Tube Pickup Head Assembly (1383/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4¾” keyway)
Not Shown
Not Shown
Not Shown
900063
900044
900045
1
1
1
Hex Roller Carrier (L.H. end 2½” keyway)
1” Pickup Head Carrier (Drive-end keyed)
1” Pickup Head Carrier (Idler-end no key)
Part No.
Qty
Description
7/16”
106051
106051
8
8
8
64
64
208
208
5/16”
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
Revised February, 2014
× 3” NC Hex Bolt–Grade 8
NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
7/16”
5/16”
×1½” NC Hex Bolt–Grade 5 (use on fingers only)
NC Whiz Nut (use on fingers only)
61
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW-28) 1997–2013
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900866
8
8
4
4
24
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 373/8” (10 Holes)
6.
7.
7a.
8.
9.
900867
106036
106052
901412
901420
8
328
0
8
0
24
40 pr.
40
2
2
Finger Rod 413/8” (11 holes)
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (329/32” lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
900958
901444
900949
900955
900861
1
1
1
1
4
Rotor Rod Mount (172¾ ”)
Pickup Tube (with 5 Spiders) (1663/16”)
4” Roller (1707/16”)
Hex Roller (1683/8”)
8-Hole Spider
Not Shown
901445
1
Complete 8-Tube Pickup Head Assembly (1663/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4¾ ” keyway)
Not Shown
Not Shown
Not Shown
900063
900044
900045
1
1
1
Hex Roller Carrier (L.H. end 2½ ” keyway)
1” Pickup Head Carrier (Drive-end keyed)
1” Pickup Head Carrier (Idler-end no key)
Part No.
Qty
Description
7/16”
106051
106051
8
8
8
64
64
264
264
5/16”
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
Revised February, 2014
× 3” NC Hex Bolt–Grade 8
NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
7/16”
5/16”
× 1½ ” NC Hex Bolt–Grade 5 (use on fingers only)
NC Whiz Nut (use on fingers only)
63
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW-28) 2014–Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
16
103095-LH 8
103095-RH 8
119135
4
119137
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900866
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 37 3/8 ” (10 Holes)
4
4
328
0
24
8
24
40pr
40
2
Finger Rod 41 3/8” (11 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (3 29/32” lg.)
10.
11.
12.
13.
14.
900867
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
900958
901444-A
900949
900955
2
1
1
1
1
Cam Track (Universal)
Rotor Rod Mount (172 3/8”)
Pickup Tube (with 5 Spiders) (166 3/16”)
4” Roller (170 7/8”)
Hex Roller (168 3/8”)
20.
Not Shown
900861
901445-A
5
1
8-Hole Spider
Complete 8-Tube Pickup Head Assembly (166 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
Not Shown
Not Shown
900063
900044
900045
1
1
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
1” Pickup Head Carrier (Drive-end keyed)
1” Pickup Head Carrier (Idler-end no key)
Part No.
Qty
Description
106051
106051
16
16
16
64
64
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
264
264
Revised February, 2014
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
65
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW 30 & 8 ROW 22) 1997–2013
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900867
8
8
4
4
24
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 413/8” (11 holes)
6.
7.
7a.
8.
9.
900866
106036
106052
901412
901420
8
344
0
8
0
24
40Pr.
40
2
2
Finger Rod 373/8” (10 holes)
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (329/32” lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
900203
940383
900402
900401
900861
1
1
1
1
5
Rotor Rod Mount (180¾”)
Pickup Tube (with 5 Spiders) (1743/16”)
4” Roller (1787/8”)
Hex Roller (1763/8”)
8-Hole Spider
Not Shown
901400
1
Complete 8-Tube Pickup Head Assembly (1743/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼ ” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4¾” keyway)
Not Shown
Not Shown
Not Shown
900063
900044
900045
1
1
1
Hex Roller Carrier (L.H. end 2½” keyway)
1” Pickup Head Carrier (Drive-end keyed)
1” Pickup Head Carrier (Idler-end no key)
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
Part No.
Qty
Description
7/16”
106051
8
8
8
64
64
280
280
5/16”
106051
Revised February, 2014
× 3” NC Hex Bolt–Grade 8
NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
7/16”
NF Stover Nut–Grade 9 (sold as a set with bolt)
× 1½ ” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
5/16”
67
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW 30 & 8 ROW 22)
2014-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
16
103095-LH 8
103095-RH 8
119135
4
119137
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900867
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 413/8” (11 holes)
4
4
344
0
24
900866
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
900203
940383-00
900402
900401
2
1
1
1
1
Cam Track (Universal)
Rotor Rod Mount (180¾”)
Pickup Tube (with 5 Spiders) (1743/16”) (1¼" PUH Bearings)
4” Roller (1787/8”)
Hex Roller (1763/8”)
900861
901400
5
1
Eight-Hole Spider
Complete 8-Tube Pickup Head Assembly (1743/16”) (1¼" PUH Bearings)
20.
Not Shown
8
24
40Pr.
40
2
Finger Rod 373/8” (10 holes)
Coupler, Finger Rod
Flangette, 2 Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (329/32” Lg.)(1 1/4” I.D.)
10.
11.
12.
13.
14.
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
Not Shown
Not Shown
900063
900044
900045
1
1
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
1” Pickup Head Carrier (Drive-end keyed)
1” Pickup Head Carrier (Idler-end no key)
Qty
Description
Hardware List
Item No.
Part No.
16
16
16
7/16”
64
64
280
280
5/16”
A.
B.
C.
D.
E.
F.
G.
106051
106051
Revised February, 2014
1
× 2 /4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
× 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
NF Stover Nut–Grade 9 (sold as a set with bolt)
5/16” × 1 ½” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
5/16”
69
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW-36) 1997–2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900897
8
8
4
4
32
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 333/8” (9 holes)
6.
7.
7a.
8.
9.
900940
106036
106052
901412
901420
16
416
0
8
0
40
56 Pr.
56
2
2
Finger Rod 293/8” (8 holes)
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (329/32” Lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
900799
901446
901289
901290
900861
1
1
1
1
7
Rotor Rod Mount (216¾”)
Pickup Tube (with 7 Spiders) (2103/16”)
4” Roller (2147/8”)
Hex Roller (2123/8”)
8-Hole Spider
20.
21.
22.
Not Shown
901025
900769
900762
901447
1
1
1
1
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld-on)
Rotor Rod Support Connection Plate
Complete 8-Tube Pickup Head Assembly (2103/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4¾” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2½” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
7/16”
106051
106051
8
8
8
96
96
320
320
5/16”
F.
G.
Revised February, 2014
× 3” NC Hex Bolt–Grade 8
NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
7/16”
5/16”
× 1½” NC Hex Bolt–Grade 5 (use on fingers only)
NC Whiz Nut (use on fingers only)
71
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW-36) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900897
4
4
416
0
32
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 33 3/8” (9 holes)
Finger Rod 29 3/8” (8 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
10.
11.
12.
13.
14.
900940
900857
106013
102005
901484
16
40
56pr
56
2
15.
16.
17.
18.
19.
103096
900799
901446
901289
901290
2
1
1
1
1
Cam Track (Universal)
Rotor Rod Mount (216 3/8”)
Pickup Tube (with 7 Spiders) (210 3/16”)
4” Roller (214 7/8”)
Hex Roller (212 3/8”)
20.
21.
22.
23.
Not Shown
900861
901025
900769
900762
901447
7
1
1
2
1
8-Hole Spider
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld-on)
Rotor Rod Support Connection Plate
Complete 8-Tube Pickup Head Assembly (210 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
16
16
16
96
96
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
320
320
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
73
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW 38) 1997-2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900866
8
8
4
4
16
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 37 3/8” (10 holes)
6.
7.
8.
9.
10.
900897
900940
901412
901420
900857
24
8
8
0
40
Finger Rod 33 3/8” (9 holes)
Finger Rod 29 3/8” (8 holes)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
Coupler, Finger Rod
11.
12.
13.
14.
15.
106013
102005
901484
103096
900820
56pr
56
2
2
1
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
Cam Track (Universal)
Rotor Rod Mount (228 3/8”)
16.
17.
18.
19.
20.
940387
901291
901292
900861
901025
1
1
1
7
1
21.
22.
23.
23a.
Not Shown
900769
900762
106036
106052
940388
1
2
440
0
1
Pickup Tube (with 7 Spiders) (222 3/16”)
4” Roller (226 7/8”)
Hex Roller (224 3/8”)
8-Hole Spider
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld-on)
Rotor Rod Support Connection Plate
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Complete 8-tube Pickup Head Assembly (222 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼ Pickup Head Carrier (Drive-end keyed)
1¼ Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4 keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2 keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
8
8
8
96
96
7/16” × 3” NC Hex Bolt–Grade 8
7/16” NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
344
344
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
75
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (6 ROW 38) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900866
4
4
440
0
16
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 37 3/8” (10 holes)
Finger Rod 33 3/8” (9 holes)
Finger Rod 29 3/8” (8 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
10.
11.
12.
13.
14.
900897
900940
900857
106013
102005
24
8
40
56pr
56
15.
16.
17.
18.
19.
901484
103096
900820
940387
901291
2
2
1
1
1
Spacer, Pickup Head (3 29/32” Lg.)
Cam Track (Universal)
Rotor Rod Mount (228 3/8”)
Pickup Tube (with 7 Spiders) (222 3/16”)
4” Roller (226 7/8”)
20.
21.
22.
23.
24.
901292
900861
901025
900769
900762
1
7
1
1
2
Hex Roller (224 3/8”)
8-Hole Spider
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld-on)
Rotor Rod Support Connection Plate
Not Shown
940388
1
Complete 8-tube Pickup Head Assembly (222 3/16”)
1
1
1
1
1
1
1¼ Pickup Head Carrier (Drive-end keyed)
1¼ Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4 keyway)
Hex Roller Carrier (L.H. end 2 1/2 keyway)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
900063
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
16
16
16
96
96
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
344
344
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
77
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (8 ROW 30) 1997-2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900866
8
8
4
4
32
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 37 3/8” (10 holes)
6.
7.
7a.
8.
9.
900897
106036
106052
901412
901420
16
464
0
8
0
40
56Pr.
56
2
2
Finger Rod 33 3/8” (9 holes)
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (3 29/32” lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
900780
901439
901293
901294
900861
1
1
1
1
7
Rotor Rod Mount (240 3/8”)
Pickup Tube (with 7 Spiders) (234 3/16”)
4” Roller (238 7/8”)
Hex Roller (236 3/8”)
8-Hole Spider
20.
21.
22.
Not Shown
901025
900769
900762
901440
1
1
2
1
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld on)
Rotor Rod Support Connection Plate
Complete 8-Tube Pickup Head Assembly (234 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Part No.
Qty
Description
106051
106051
8
8
8
96
96
7/16” × 3” NC Hex Bolt–Grade 8
7/16” NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade-9 (sold as a set with bolt)
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
368
368
Revised February, 2014
5/16” × 1 1/2” NC Hex Bolt–Grade-5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
79
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (8 ROW 30) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900866
4
4
464
0
32
16
40
56Pr.
56
2
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 37 3/8” (10 holes)
Finger Rod 33 3/8” (9 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (3 29/32” lg.)
10.
11.
12.
13.
14.
900897
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
900780
901439
901293
901294
2
1
1
1
1
Cam Track (Universal)
Rotor Rod Mount (240 3/8”)
Pickup Tube (with 7 Spiders) (234 3/16”)
4” Roller (238 7/8”)
Hex Roller (236 3/8”)
20.
21.
22.
23.
Not Shown
900861
901025
900769
900762
901440
7
1
1
2
1
8-Hole Spider
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld on)
Rotor Rod Support Connection Plate
Complete 8-Tube Pickup Head Assembly (234 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
Pickup Head Carrier (Drive-end keyed)
Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Part No.
Qty
Description
106051
106051
16
16
16
96
96
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade-9 (sold as a set with bolt)
Hardware List
Item No.
A.
B.
C.
D.
E.
F.
G.
368
368
Revised February, 2014
5/16” × 1 1/2” NC Hex Bolt–Grade-5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
81
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (12 ROW 22) 1997-2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900867
8
8
4
4
32
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 41 3/8” (11 holes)
6.
7.
7a.
8.
9.
900866
106036
106052
901412
901420
16
512
0
8
0
Finger Rod 37 3/8” (10 holes)
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
40
56pr.
56
2
2
15.
16.
17.
18.
19.
900878
901448
901295
901296
900861
1
1
1
1
7
Rotor Rod Mount (264 3/8”)
Pickup Tube (with 7 Spiders) (258 3/16”)
4” Roller (262 7/8”)
Hex Roller (260 3/8”)
8-Hole Spider
20.
21.
22.
Not Shown
901025
900769
900762
901449
1
1
2
1
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld on)
Rotor Rod Support Connection Plate
Complete 8-Tube Pickup Head Assembly (258 3/16”)
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (3 29/32” lg.)
Cam Track (Universal)
Roller Carriers
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
106051
106051
F.
G.
Revised February, 2014
Qty.
Description
8
8
8
96
96
7/16” × 3” NC Hex Bolt–Grade 8
7/16” NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
416
416
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
83
ONE STEP ROD CUTTER
8 TUBE PICKUP HEAD ASSEMBLY (12 ROW 22) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900867
4
4
512
0
32
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 41 3/8” (11 holes)
10.
11.
12.
13.
14.
900866
900857
106013
102005
901484
16
40
56pr.
56
2
15.
16.
17.
18.
19.
103096
900878
901448
901295
901296
2
1
1
1
1
Cam Track (Universal)
Rotor Rod Mount (264 3/8”)
Pickup Tube (with 7 Spiders) (258 3/16”)
4” Roller (262 7/8”)
Hex Roller (260 3/8”)
20.
21.
22.
23.
Not Shown
900861
901025
900769
900762
901449
7
1
1
2
1
8-Hole Spider
Rotor Rod Support Guide
Rotor Rod Support Bracket (weld on)
Rotor Rod Support Connection Plate
Complete 8-Tube Pickup Head Assembly (258 3/16”)
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Finger Rod 37 3/8” (10 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (w/Lock Collar)
Spacer, Pickup Head (3 29/32” lg.)
Roller Carriers
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
106051
106051
F.
G.
Revised February, 2014
Qty.
Description
16
16
16
96
96
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
416
416
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
85
ONE STEP ROD CUTTER
OFFSET “Y“ L.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2005–2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119134
119135
900897
8
8
4
4
16
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, R.H. Long Finger Offset
Shaft, L.H. Long Finger Offset
Finger Rod 333/8” (9 holes)
6.
7.
7a.
8.
9.
900940
106036
106052
901412
901420
32
400
0
8
0
40
56pr.
56
2
2
Finger Rod 293/8” (8 holes)
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (329/32” Lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
901628
901607
901613
901611
900861
1
1
1
1
7
L.H. Rotor Rod Mount (2083/8”)
L.H. Pickup Tube (with 7 Spiders) (2023/16”)
L.H. 4” Roller (206”)
L.H. Hex Roller (204”)
8-Hole Spider
20.
21.
22.
Not Shown
901025
900769
900762
901605
1
1
1
1
Rotor Rod Support Guide (optional on this model)
Rotor Rod Support Bracket (weld-on) (optional on this model)
Rotor Rod Support Connection Plate (optional on this model)
L.H. Complete 8-Tube Pickup Head Assembly (2023/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4¾” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2½” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
7/16”
106051
106051
8
8
8
96
96
304
304
5/16”
F.
G.
Revised February, 2014
× 3” NC Hex Bolt–Grade 8
NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
7/16”
5/16”
× 1½” NC Hex Bolt–Grade 5 (use on fingers only)
NC Whiz Nut (use on fingers only)
87
ONE STEP ROD CUTTER
OFFSET “Y” R.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2005-2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119136
900940
8
8
4
4
12
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger Rod 29 3/8” (8 holes)
6.
7.
7a.
8.
9.
900897
106036
106052
901412
901420
20
276
0
4
4
24
40pr.
40
2
2
Finger Rod 33 3/8” (9 holes)
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
901625
901606
901612
901610
900861
1
1
1
1
5
R.H. Rotor Rod Mount (146 3/8”)
R.H. Pickup Tube (with 5 Spiders) (140 3/16”)
R.H. 4” Roller (144”)
R.H. Hex Roller (142”)
8-Hole Spider
Not Shown
901600
1
R.H. Complete 8-Tube Pickup Head Assembly (140 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
8
8
8
64
64
7/16” × 3” NC Hex Bolt–Grade 8
7/16” NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
212
212
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
89
ONE STEP ROD CUTTER
OFFSET “Y“ L.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900897
4
4
400
0
16
32
40
56pr.
56
2
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 33 3/8” (9 holes)
Finger Rod 29 3/8” (8 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
10.
11.
12.
13.
14.
900940
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
901628
901607
901613
901611
2
1
1
1
1
Cam Track (Universal)
L.H. Rotor Rod Mount (208 3/8”)
L.H. Pickup Tube (with 7 Spiders) (202 3/16”)
L.H. 4” Roller (206”)
L.H. Hex Roller (204”)
20.
21.
22.
23.
Not Shown
900861
901025
900769
900762
901605
7
1
1
2
1
8-Hole Spider
Rotor Rod Support Guide (optional on this model)
Rotor Rod Support Bracket (weld-on) (optional on this model)
Rotor Rod Support Connection Plate (optional on this model)
L.H. Complete 8-Tube Pickup Head Assembly (202 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
16
16
16
96
96
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
304
304
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
91
ONE STEP ROD CUTTER
OFFSET “Y” R.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900940
4
4
276
0
12
20
24
40pr.
40
2
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 29 3/8” (8 holes)
Finger Rod 33 3/8” (9 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
10.
11.
12.
13.
14.
900897
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
901625
901606
901612
901610
2
1
1
1
1
Cam Track (Universal)
R.H. Rotor Rod Mount (146 3/8”)
R.H. Pickup Tube (with 5 Spiders) (140 3/16”)
R.H. 4” Roller (144”)
R.H. Hex Roller (142”)
20.
Not Shown
900861
901600
5
1
8-Hole Spider
R.H. Complete 8-Tube Pickup Head Assembly (140 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
16
16
16
64
64
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
212
212
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
93
ONE STEP ROD CUTTER
CENTER “Y” L.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2005-2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119136
119135
900867
8
8
4
4
20
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, R.H. Short Finger Offset
Shaft, L.H. Long Finger Offset
Finger Rod 41 3/8” (11 holes)
6.
7.
7a.
8.
9.
900866
106036
106052
901412
901420
12
340
0
4
4
24
40pr.
40
2
2
Finger Rod 37 3/8” (10 holes)
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
901698
901683
901688
901692
900861
1
1
1
1
5
L.H. Rotor Rod Mount (178 3/8”)
L.H. Pickup Tube (with 5 Spiders) (172 3/16”)
L.H. 4” Roller (176”)
L.H. Hex Roller (174”)
8-Hole Spider
Not Shown
901684
1
L.H. Complete 8-Tube Pickup Head Assembly (172 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
8
8
8
64
64
7/16” × 3” NC Hex Bolt–Grade 8
7/16” NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
276
276
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
95
ONE STEP ROD CUTTER
CENTER “Y” R.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2005-2012
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
103095
102015
119135
119134
900867
8
8
4
4
16
Cam Arm (Universal)
Bearing, Cam Arm
Shaft, L.H. Long Finger Offset
Shaft, R.H. Long Finger Offset
Finger Rod 41 3/8” (11 holes)
6.
7.
7a.
8.
9.
900866
106036
106052
901412
901420
16
336
0
8
0
24
40pr.
40
2
2
Finger Rod 37 3/8” (10 holes)
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
End Spider Stub Shaft (short)
End Spider Stub Shaft (long)
10.
11.
12.
13.
14.
900857
106013
102005
901484
103096
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
Cam Track (Universal)
15.
16.
17.
18.
19.
901695
901681
901685
901690
900861
1
1
1
1
5
R.H. Rotor Rod Mount (176 3/8”)
R.H. Pickup Tube (with 5 Spiders) (170 3/16”)
R.H. 4” Roller (174”)
R.H. Hex Roller (172”)
8-Hole Spider
Not Shown
901680
1
R.H. Complete 8-Tube Pickup Head Assembly (170 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
8
8
8
64
64
7/16” × 3” NC Hex Bolt–Grade 8
7/16” NC Nylon Hex Nut
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
272
272
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
97
ONE STEP ROD CUTTER
CENTER “Y” L.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900867
4
4
340
0
20
12
24
40pr.
40
2
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 41 3/8” (11 holes)
Finger Rod 37 3/8” (10 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
10.
11.
12.
13.
14.
900866
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
901698
901683
901688
901692
2
1
1
1
1
Cam Track (Universal)
L.H. Rotor Rod Mount (178 3/8”)
L.H. Pickup Tube (with 5 Spiders) (172 3/16”)
L.H. 4” Roller (176”)
L.H. Hex Roller (174”)
20.
Not Shown
900861
901684
5
1
8-Hole Spider
L.H. Complete 8-Tube Pickup Head Assembly (172 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2 1/2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
16
16
16
64
64
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
276
276
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
99
ONE STEP ROD CUTTER
CENTER “Y” R.H. PICKUP HEAD ASSEMBLY (12 ROW-30) 2013-Present
Parts List
Item No.
Part No.
Qty
Description
1.
2.
3.
4.
5.
102015
103095-LH
103095-RH
119135
119137
16
8
8
4
4
Bearing, Cam Arm
Cam Arm (Threaded)
Cam Arm (Threaded)
Shaft, L.H. Long Finger Offset
Shaft, L.H. Short Finger Offset
6.
7.
8.
8a.
9.
119134
119136
106036
106052
900867
4
4
336
0
16
16
24
40pr.
40
2
Shaft, R.H. Long Finger Offset
Shaft, R.H. Short Finger Offset
Finger, with Radius (8-Tube Pickup Head)
Finger, Soft (Optional)
Finger Rod 41 3/8” (11 holes)
Finger Rod 37 3/8” (10 holes)
Coupler, Finger Rod
Flangette, 2-Hole
Bearing, 1” Insert (with Lock Collar)
Spacer, Pickup Head (3 29/32” Lg.)
10.
11.
12.
13.
14.
900866
900857
106013
102005
901484
15.
16.
17.
18.
19.
103096
901695
901681
901685
901690
2
1
1
1
1
Cam Track (Universal)
R.H. Rotor Rod Mount (176 3/8”)
R.H. Pickup Tube (with 5 Spiders) (170 3/16”)
R.H. 4” Roller (174”)
R.H. Hex Roller (172”)
20.
Not Shown
900861
901680
5
1
8-Hole Spider
R.H. Complete 8-Tube Pickup Head Assembly (170 3/16”)
Roller Carriers
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
901450
901451
900058
900059
900062
1
1
1
1
1
1¼” Pickup Head Carrier (Drive-end keyed)
1¼” Pickup Head Carrier (Idler-end no key)
4” Roller Carrier (Drive-end keyed)
4” Roller Carrier (Idler-end no key)
Hex Roller Carrier (R.H. end 4 3/4” keyway)
Not Shown
900063
1
Hex Roller Carrier (L.H. end 2” keyway)
Hardware List
Item No.
A.
B.
C.
D.
E.
Part No.
Qty
Description
106051
106051
16
16
16
64
64
7/16” × 2 1/4” NF Hex Bolt–Grade 8
7/16” Lock Washer
5/8” NF Jam Nut
5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)
5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)
F.
G.
Revised February, 2014
272
272
5/16” × 1 1/2” NC Hex Bolt–Grade 5 (use on fingers only)
5/16” NC Whiz Nut (use on fingers only)
101