MX3560 • MX3070 • MX35AA

MX3560 • MX3070 • MX35AA
Airless and Air Assisted Airless Spray Outfits
Heavy Duty Pumping Power for Protective Coating and Corrosion Control Applications
• Designed for harsh environments
• Outperforms & outlasts other sprayers
• Extended work-life cycles
• Quiet, low/no ice operation
• CE/ATEX approved
• 5 year warranty
www.binks.com
A41-109R 09/12
Binks MX ™
Binks MX ™
heavy duty series
Binks engineering reinvents and simplifies two ball piston pumping
technology to deliver one of the most rugged and user-friendly products
on the market today, with many standard features vs. the competition.
Binks MX Feature
Standard
Low/No Ice
Operates 2.5X longer vs. competition
without interruption
Low Noise
<78 dBa at 80 psi air inlet pressure
Low Air Consumption
Up to 32% scfm savings vs. competition at
100 psi air inlet
ON
RO
DF
NG
PIST
Long Lasting Ceramic Coated
Piston Rods
Resists wear from highly abrasive
fluids and reduces friction on
sliding components
LIF E
Patented Air Valve Technology
Enables pump to operate without interruption
from as low as 1,000 psi to as high as 7,000 psi
O R A LO N GER W O
RK
I
Spring Loaded Packings
Automatically adjust to extend work life,
reduce maintenance & downtime
Lubricant Free Air Motor and Valve Design
Reduces maintenance and simplifies operation
CE Marked and Fully ATEX Approved
Carbon or Stainless Steel Construction
5
YEAR LIM
VE
WARRAN
CT
D PRODU
ITE
TY
FI
5 Year Limited Warranty
Recommended Materials
Solvent coatings
Waterborne coatings
Zinc rich primers and paints
Cold tar epoxies
Heavily bodied urethanes
Enamels and polyurethanes
And many others
Typical Applications
Corrosion protection
Steel fabrications and structures
Gas and oil installations
Marine and ship building
Skips and dumpsters
Off road vehicles
Truck, bus, trailer and
chassis manufacturers
Binks MX ™ Heavy Duty Series
Shown: Binks MX Cart-Mount Outfit with Airless 75 spray gun,
25' airless hose, 5' whip hose and 5 gal. siphon kit.
Air Controls included for pump and/or
air assist spray gun applications
Patented Anti-stall
Magnetic Detent
Technology with
quick exhaust
valves feature low
to no ice operation
and uninterrupted
production
Air Motor Silencer
for quiet operation
Durable Hose Bracket
for convenient storage
Flat Free Tires
require no maintenance
Manual Fluid
Pressure
Relief Valve
for easy operation
Carbon or Stainless
Steel Housing with
Ceramic Coated
Step Rod Design
reduces friction in the
pump rod movement
and is proven tough
to resist wear from
high-abrasive coatings
Swivel Fitting
ensures ease
of siphon
hose alignment
Large 1 ½" “Knock Off”
Fluid Inlet for faster
pump assembly and
disassembly in the field
Mounting Setups:
• Bare Pump (no mount provided)
• Cart-Mount (shown above)
• Wall-Mount (shown at right)
Binks MX ™
Customize the Binks MX package for your specific application.
MX outfits are complete and ready for operation with an
air filter/regulator controls and suction wand.
Binks MX Accessories and Spares
Part Numbers
*Specify tip separately when ordering
Binks Airless 75 Hand Gun with Stainless Steel Fluid Tube 0811-7500-1
Binks Airless 75 Hand Gun with Direct Connect Connector 0811-7500-2
Binks AA4400M AA Spray Gun Flat
0909-4400-HF0000
Binks AA4400M AA Spray Gun Twist
0909-4400-HT0000
Cart Assembly 41-28280-MX
Wall Bracket Assembly 104095
Silencer 192509
Binks Micro-Swivel ¼" NPS (F) to ¼" NPS (M) (7,550 psi) 72-2332
Binks Micro-Swivel 3/ 8" NPS (F) to ¼" NPS (M) (7,550 psi) 72-2333
MX 35 XX XX - X A X X X X X
High Pressure Filter Elements:
Ordering Example: MX3560PU-CAC7T15
MX3560 60:1 pump carbon steel lower fluid section with PTFE/UHMW packings
sold with 70 mesh filter, 55 gal siphon kit, Airless 7500 gun w/ fluid tube - no tip*,
50' airless hose with 5' whip hose.
30 = 3.0 GPM (190 CC)
35 = 3.5 GPM (220 CC)
Ratio:
60 = 60:1
70 = 70:1
AA = 60:1 (4,060 psi with
5 bar limit)
Seals:
PL = PTFE/Leather
PU = PTFE/UHMW
Material:
C = Carbon Steel
S = Stainless (AA only)
Adjustment: A = Auto (spring load)
Mounting: C = Cart
W = Wall
Filter:
0 = None
1 = 100 Mesh
3 = 30 Mesh
5 = 50 Mesh
7 = 70 Mesh
Siphon:
0 = None
S = 5 gallon
T = 55 gallon
Gun:
0 = None
1 = Airless 7500 with
Fluid Tube Less Tip
2 = AA4400
Hose:
0 = None
2 = 25 feet
5 = 50 feet
Output:
70 Mesh 100 Mesh 0114-014884
0114-014883
Air Motor Spares Kits:
MX35AA Air Motor Spares Kit MX3560 Air Motor Spares Kit MX3070 Air Motor Spares Kit 250645
250645
250645
Fluid Section Repair Kits:
MX35AA Fluid Section Repair Kit MX3560 Fluid Section Repair Kit MX3070 Fluid Section Repair Kit Pump Specification MX35AA Ratio Max. Inlet Pressure
Flow Rate @ 15 cycles (continuous) Flow Rate @ 30 cycles (intermittent) Volume/Cycle Max. Fluid Pressure
Cylinder Diameter
Piston Stroke
Noise Level Air Consumption @ 20 cycles/min
Operation Manual 60:1 72.5 psi (5.0 bar)
.87 gpm
(3.3 l/min) 1.74 gpm
(6.6 l/min) 7.42 oz (220 ml)
4060 psi (280 bar) 10" (260 mm) 5" (127 mm) 80dB(A)* 52.9 SCFM
(1498 l/m) 77-2961
250658
250658
250662
MX3560 60:1 116 psi (8.0 bar)
.87 gpm (3.3 l/min)
1.74 gpm
(6.6 l/min) 7.42 oz (220 ml)
6960 psi
(480 bar) 10" (260 mm) 5" (127 mm) 80dB(A)*
70.1 SCFM
(1985 l/m) 77-2960
MX3070
70:1
101.5 psi
(7.0 bar)
.75 gpm
(2.85 l/min)
1.50 gpm
(5.7 l/min)
6.4 oz
(190 ml)
7105 psi
(490 bar)
10"
(260 mm)
5"
(127 mm)
80dB(A)*
63.3 SCFM
(1792 l/m)
77-2960
*Noise level recorded while pump was running at 80 psi (5.5 bar) @ 10 cycles per minute.
Ask your Binks representative about the full range of pump options, equipment and accessories including:
Binks Airless A75 Gun
operates up to
7500 psi (571 bar)
Binks AA4400M Gun
for Air Assisted Airless
applications with
the MX35AA
Hose and Whip Ends
High Pressure
(500 bar)
HP SS Fluid Filter
High pressure stainless
steel, 100 mesh (150
micron), dump valve,
two gun outlet ports
Filter Coalescer
Part # 41-28191
remove water, dirt, oil;
down to .01 micron
5
•
800.992.4657 (USA/Canada)
Sales and Service Through A Global Network
of Industrial Distributors
YEAR LIM
VE
FI
www.binks.com
TY
The Single Source Solution
for Spray Finishing and Fluid Handling
WARRAN
CT
D PRODU
ITE
Binks® warrants to the original end-use purchaser that the
Binks branded products “MX™”, “Maple™”, and “Gemini ™ II”
shall not fail under normal use and service due to a defect in
material or workmanship within five (5) years from the
date of shipment from Binks. Does not include normal wear.
See complete warranty at www.binks.com
Binks is a registered trademark of Finishing Brands.
MX, Maple, and Gemini are trademarks of Finishing Brands.
© 2012 Binks • Printed in USA • All Rights Reserved A41-109R (09/2012)