MID-500 User Manual

LINDELL AUDIΩ
WWW.LINDELLAUDIO.SE
MID-500 USER MANUAL
500 Series 3-band EQ with Mid-frequency Dip, High Peaking, and Low Peaking
2015-05-02 Rev.1
WWW.LINDELLAUDIO.SE
LINDELL AUDIΩ
WWW.LINDELLAUDIO.SE
Your Key to Better Mixes
The MID-500 is a passive 500 Series equalizer based on the classic Pultec MEQ-5 filters.
It's completely discrete and uses only handwound transformers, inductors, capacitors and transistors in the signal chain.
Passive equalizer loss is restored by an op-amp - so your overall result is unity gain. The MID-500's high-quality construction
includes handwound transformers, inductors, capacitors, and transistors - all geared towards delivering a vintage sound
reminiscent of the legendary MEQ-5. We know that the mid band is critical when it comes to great-sounding recordings.
With the MID-500 in your rack, you'll be in command of this all-important region.
Control your "power region"
Based on the classic Pultec MEQ-5 solid-state mid-band equalizer, MID-500 500-Series Passive EQ provides
three bands of EQ anchored by a mid-frequency dip (selectable from 12 frequencies spanning a range of 200Hz to 7kHz).
High peaking is provided at 1.5k, 2k, 3k, 4k, and 5kHz. Low peaking is selectable at 200, 300, 500, 700, and 1000Hz.
This arrangement gives you exacting control over what Pultec famously called the "power region" of your program material
- the frequency range in which most of the sound energy is concentrated. Having macro control over the power region is your key
to better mixes that translate to the world outside your studio.
Lindell Audio MID-500 500 Series EQ Features at a Glance:
* A passive 3-band equalizer based on the classic Pultec MEQ-5 filters:
* Mid-frequency dip selectable from 12 frequencies (200Hz to 7kHz)
* High-frequency peaking at 1.5k, 2k, 3k, 4k, and 5kHz
* Low-frequency peaking selectable at 200, 300, 500, 700, and 1000Hz
* Handwound transformers, inductors, capacitors, and transistors
* Requires compatible 500 Series chassis
2015-05-02 Rev.1
WWW.LINDELLAUDIO.SE
LINDELL AUDIΩ
WWW.LINDELLAUDIO.SE
How to Install the module into a power chassi:
1) Power OFF the power chassi
2) Unpack the module and make sure nothing surrounds the card edge connector
3) Carefully slide the module into an empty slot in your power chassi
4) Make sure the module connectors sits well into the mating Edac chassi connector
5) Power ON the power chassi
6) Rock’n’Roll
High Freq. Stepped Selector
High Freq. Boost 12db
Mid Freq. Stepped Selector
Mid Freq. Dip 12db
Low Freq. Stepped Selector
Equalizer Activate
Low Freq. Boost 12db
2015-05-02 Rev.1
WWW.LINDELLAUDIO.SE
LINDELL AUDIΩ
WWW.LINDELLAUDIO.SE
SPECS:
Power Requirements:
+/- 16V
- Mid-frequency dip selectable 200, 250, 300, 500, 700, 1000, 1500, 2000, 3000, 4000, 5000, 7000Hz
- High-frequency peaking selectable at 1.5k, 2k, 3k, 4k, and 5kHz
- Low-frequency peaking selectable at 200, 300, 500, 700, and 1000Hz
Current Draw:
80mA
1*
2*
3*
4*
5*
6*
7*
8*
9*
10*
11*
12*
13*
14*
15*
Input Impedance:
10kohm Transformer Balanced
Output Load Impedance:
70ohm Transformer Balanced
Frequency Response:
+/- 1dB 20 Hz to 20kHz
Gain:
Unity,(+/- 12db)
Dimensions:
133,35 mm x 38,1 mm
2015-05-02 Rev.1
CARD EDGE PIN OUT
WWW.LINDELLAUDIO.SE
CHASSIS GROUND
OUTPUT + (XLR PIN 2)
OUTPUT - (XLR PIN 3)
COMMON
INPUT- (XLR PIN 3)
INPUT+ (XLR PIN 2)
+16VDC
PSU COMMON
-16VDC
+48VDC
LINDELL AUDIΩ
WWW.LINDELLAUDIO.SE
CREDITS
*
*
*
*
*
Concept & Design: Tobias Lindell
Circuit & Electrical Design: Mr. Qui/Lindell
Transformer Design: Mr. Hu
Production Manager: Mr. Qui
Country of Manufacturing: China
WARRANTY
* Lindell Audio warrants all of our products to be free from defective parts and workmanship for a period of one year.
* The warranty period begins at the original purchase date and is transferable within the period of warranty.
* This warranty excludes the following conditions: misuse, modifications (eg: changing of transformers, opamps, etc) or
unauthorized repair, brute force usage and damage incurred during shipment.
* During the time of the warranty, Lindell Audio will repair or replace any defective parts, via our distributors free of charge.
* Customers are responsible for all inbound freight charges to the service facility, while Lindell Audio will pay for return freight.
COMPANY INFORMATION
I started ”Lindell Audio” back in 2010 and set out to design recording studio equipment
to satisfy my own way of working. Developing functions and user interface that didn’t excist
on the market. I’m resident producer at Bohus Sound Studios. http://bohussound.com/
Where I produced and mixed many hit records thru out the years:
Europe – Last Look At Eden, Mustasch – Latest Version Of The Truth & Mustasch,
Hardcore Superstar – Split Your Lip, Crash Diet, Bullet, Avatar, HEAT, Von Benzo, etc.
Our goal as a gear manufacturer is simple; Produce recording equipment, designed by engineers
for engineers.…
Tobias Lindell
Showroom, Swedish Office:
Lindell Audio, Utmarksvägen 6, 442 39 Kungälv, Sweden
[email protected]
Mother Company:
New Sound Trading Ltd., Faulkner House, Mill Lane, Sauston,
Cambridgeshire, CB22 3HY, England
VAT: Gb136 8371 96
2015-05-02 Rev.1
WWW.LINDELLAUDIO.SE