Grain and Milling Brochure

Standard Products for the Feed, Grain and Milling Industries
Equipment for the
Feed, Grain and Milling industries
drum magnets
Magnetic drum separators and housing (DSH series) provide
trouble-free automatic extraction of tramp iron from heavy
flows of abrasive and large-sized materials such as sugarcane,
corn and others.
mean
higher profits
better products
metal detectors
MPI offers a complete line of next-generation Cassel metal
detectors, featuring “Four-Quadrant” technology. Integrated FourQuadrant technology allows Cassel equipment to readily adjust
settings to detect metals in even the most “difficult” products. To
ensure maximum performance, users are taken through a series of
easy-to-follow, step-by-step, high-graphic screens to set standards
for product testing. By finding even the smallest particles of ferrous,
nonferrous and stainless steel contaminants, Cassel metal detectors
assist food manufacturers to meet HACCP, IFS, BRC and GMP
safety standards. Able to meet the needs of a variety of applications
in harsh production environments, equipment models can be
installed on conveyor lines or onto gravity feed pipes. MPI also
offers a complete line of checkweighers.
suspended permanent magnets
Suspended permanent and electromagnetic separators produce the
most effective removal of unwanted tramp iron from heavy burdened
depths of material being conveyed on a fast moving conveyor belt.
Captured tramp metal accumulates across the entire magnetic face,
substantially increasing the amount of metal contaminant that can be
retained. Equipment is built for extremely rugged environments.
Have a question about
Magnets, Metal Control
or Material Handling products?
Ask the
Magnet Man
www.mpimagnet.com
About Magnetic Products, Inc. (MPI)
Magnetic Products Inc. (MPI), based in southeastern Michigan, is a worldwide provider
of both magnetic and non-magnetic material handling solutions. MPI leads the industry
by continually engineering inventive magnetic equipment and advancing customer
education, through significant investments in research and development and proactive
product training. For over 30 years, MPI has implemented a business model that
combines technologically superior equipment with industry-leading customer service.
MPI interacts closely with its customers
DISTRIBUTED BY:
and expands its offerings to meet the
changes of a dynamic marketplace.
For further information,
visit www.mpimagnet.com.
MPI Products for Feed, Grain and Milling Industries March 2012 © Magnetic Products, Inc.
&
quality and safety
• powerful permanent ceramic 8 (standard) or optional Rare
Earth magnet material
• standard sizes: 12” dia. to 36” dia. and widths from 12” to 60”
Free Magnet
Audits
Magnetic Products, Inc. offers free magnet audits to
ensure magnetic separators meet the standards
and requirements of our
industry and customer
base. These audits serve
as HACCP documentation as well as meet plant
requirements for QA standards for a variety of safety
standards, including IFS,
BRC and GMP.
provides magnetic separators and metal detectors used throughout feed,
grain and flour-milling facilities to remove metal contamination from products
and prevent tramp iron from damaging processing equipment. MPI designs, engineers
and builds a full range of magnetic separators including plate magnets, drawer magnets,
drum magnets, free-flow magnets, grate and tube magnets, magnetic chutes, separation
rolls and suspended permanent magnets. MPI also offers a full line of Cassel metal
detectors and checkweighers.
MPI
Free Testing for
Metal Detector
Applications
Magnetic Products, Inc.
(MPI) offers free in-house
testing for metal detector
applications. MPI’s
laboratory houses state-ofthe-art metal detectors and
other testing equipment.
Magnetic Products, Inc.
P.O. Box 529 • 683 Town Center Dr. • Highland, MI 48357 USA
P 800.544.5930 • F 248.887.6100 • www.mpimagnet.com • [email protected]
Standard Products for the Feed, Grain and Milling Industries
Magnetic separators are installed in
any processing or production line where
ferrous contaminants must be removed to:
Standard Products for the Feed, Grain and Milling Industries
plate magnets
Single-step, doublestep and quick clean
designs available!
MPI provides a wide range of plate magnets used in gravity-fed
angled chutes which convey low-to-high volume product streams.
Typically installed below-the-flow, product travels over the magnetic
face, providing optimum ferrous tramp metal retention in a wide
variety of chute applications. MPI offers single-step and double-step
plate magnets to divert the product stream away from the magnet
surface, while allowing tramp metal to be magnetically attracted
to the magnet’s surface behind the collection steps. A quick-clean
option allows for rapid cleaning of the magnet. Also available is a
powerful magnetic rotary feeder which provides even distribution of
product to hammermills.
• ensure and protect product purity
• prevent damage to machinery
• eliminate hazards associated with
tramp metal
The job and location of the magnet will vary
depending upon the process and the setting.
Magnets are typically found in three areas
(application sites) within a facility.
drawer magnets
1. Primary applications, where incoming grain arrives at the plant receiving areas.
Available in five standard styles and a variety of sizes, drawer
magnets (DMU series) remove small-to-medium-sized ferrous
tramp metal contaminants from dry, granular free-flowing
product streams in gravity-fed vertical chutes.
2. Secondary applications, where grain enters the plant for processing.
3. Finishing applications, where processed grain, now flour or another end-product, is
packaged or loaded into trucks for distribution to end users
application
primary
secondary
finishing
function of magnetic equipment
location
process high volume product flows
remove incoming tramp iron
retain large volumes of tramp iron between
magnet cleaning cycles
plant receiving areas
•
protect specific plant equipment
hammer mills, airlocks, screw and drag
conveyors, sifters, roller mills, bucket
elevators, screeners, pumps
•
maintain end-product quality to ensure that
the product shipped from the plant does not
contain any tramp iron
packing systems and bulk load-out areas
•
•
•
free-flow magnets
Free-flow cylinder magnets (FFC series) and mini free-flow cylinder
magnets (MFFS series) capture large and small tramp metal from highvolume, abrasive, vertical gravity-fed product streams. FFC and MFFS
series magnets provide maximum ferrous tramp metal retention in
product streams where “wash-off” is a concern.
• MPI exclusive, heavy-duty hexagon-shaped permanent magnet
• stainless steel housing
• available in a variety of sizes to meet application requirements
separation rolls
Magnetic head pulley / separation roll magnets (SR series) remove
both large and small ferrous tramp iron contaminants from beltconveyed product streams in belt conveyor systems.
• powerful permanent ceramic 8 magnet material
• three different hub styles and crown faces available
• face widths from 8” to 62” and face diameters from 4” to 36”
• MPI exclusive magnet cleaning systems
• Rare Earth permanent magnet material
• single or multi-tier drawer housing design
magnetic chutes
Magnetic chute separators (MC series) automatically capture ferrous
tramp iron in high-volume, vertical, gravity-fed product streams.
MC-series magnets are ideal for heavy product flows which would
otherwise bridge or choke if filtered through magnetic
grates. MPI’s MC-series magnets are used to improve
product quality and protect equipment.
•
•
•
•
available in two- or three-cell designs
magnetic face steps optimize tramp iron collection
offered in 14 standard sizes
powerful Rare Earth magnet material (option)
grate and tube magnets
Grate magnets (GM series) remove medium- and small-to-mediumsized ferrous tramp metal contaminants from dry, granular freeflowing product streams in gravity-fed vertical chutes, hoppers,
housings, and surge or catch bins. Grate magnets offer efficient,
economical magnetic protection of processing equipment while
improving product purity.
•
•
•
square, rectangular or round configurations
four different styles, depending on product flow characteristics
multiple magnetic rows, non-standard row spacing and powerful
Rare Earth magnet energy design options
Magnetic tubes (MT series) are used to remove small-to-medium
size ferrous tramp metal from a variety of product streams to
improve product quality and protect processing machinery.
rare ea
r th
+
ceram
m a g n ei c
ts
=
SUPER
-HOLD
HYBRI
D
Do you require maximum
tramp metal protection?
MPI now provides hybrid “power
booster” magnets in many of its
magnetic separators. Hybrid
magnets, offered exclusively by
MPI, combine the exceptional
holding power of Rare Earth
magnets with the outstanding
reach-out of ceramic magnets.
By “marrying” these materials,
MPI’s hybrid magnets offer
unparalleled product protection
and tramp metal control.
Standard Products for the Feed, Grain and Milling Industries
Magnetic separators are installed in
any processing or production line where
ferrous contaminants must be removed to:
Standard Products for the Feed, Grain and Milling Industries
plate magnets
Single-step, doublestep and quick clean
designs available!
MPI provides a wide range of plate magnets used in gravity-fed
angled chutes which convey low-to-high volume product streams.
Typically installed below-the-flow, product travels over the magnetic
face, providing optimum ferrous tramp metal retention in a wide
variety of chute applications. MPI offers single-step and double-step
plate magnets to divert the product stream away from the magnet
surface, while allowing tramp metal to be magnetically attracted
to the magnet’s surface behind the collection steps. A quick-clean
option allows for rapid cleaning of the magnet. Also available is a
powerful magnetic rotary feeder which provides even distribution of
product to hammermills.
• ensure and protect product purity
• prevent damage to machinery
• eliminate hazards associated with
tramp metal
The job and location of the magnet will vary
depending upon the process and the setting.
Magnets are typically found in three areas
(application sites) within a facility.
drawer magnets
1. Primary applications, where incoming grain arrives at the plant receiving areas.
Available in five standard styles and a variety of sizes, drawer
magnets (DMU series) remove small-to-medium-sized ferrous
tramp metal contaminants from dry, granular free-flowing
product streams in gravity-fed vertical chutes.
2. Secondary applications, where grain enters the plant for processing.
3. Finishing applications, where processed grain, now flour or another end-product, is
packaged or loaded into trucks for distribution to end users
application
primary
secondary
finishing
function of magnetic equipment
•
•
•
location
process high volume product flows
remove incoming tramp iron
retain large volumes of tramp iron between
magnet cleaning cycles
plant receiving areas
•
protect specific plant equipment
hammer mills, airlocks, screw and drag
conveyors, sifters, roller mills, bucket
elevators, screeners, pumps
•
maintain end-product quality to ensure that
the product shipped from the plant does not
contain any tramp iron
packing systems and bulk load-out areas
free-flow magnets
Free-flow cylinder magnets (FFC series) and mini free-flow cylinder
magnets (MFFS series) capture large and small tramp metal from highvolume, abrasive, vertical gravity-fed product streams. FFC and MFFS
series magnets provide maximum ferrous tramp metal retention in
product streams where “wash-off” is a concern.
• MPI exclusive, heavy-duty hexagon-shaped permanent magnet
• stainless steel housing
• available in a variety of sizes to meet application requirements
separation rolls
Magnetic head pulley / separation roll magnets (SR series) remove
both large and small ferrous tramp iron contaminants from beltconveyed product streams in belt conveyor systems.
• powerful permanent ceramic 8 magnet material
• three different hub styles and crown faces available
• face widths from 8” to 62” and face diameters from 4” to 36”
• MPI exclusive magnet cleaning systems
• Rare Earth permanent magnet material
• single or multi-tier drawer housing design
magnetic chutes
Magnetic chute separators (MC series) automatically capture ferrous
tramp iron in high-volume, vertical, gravity-fed product streams.
MC-series magnets are ideal for heavy product flows which would
otherwise bridge or choke if filtered through magnetic
grates. MPI’s MC-series magnets are used to improve
product quality and protect equipment.
•
•
•
•
available in two- or three-cell designs
magnetic face steps optimize tramp iron collection
offered in 14 standard sizes
powerful Rare Earth magnet material (option)
grate and tube magnets
Grate magnets (GM series) remove medium- and small-to-mediumsized ferrous tramp metal contaminants from dry, granular freeflowing product streams in gravity-fed vertical chutes, hoppers,
housings, and surge or catch bins. Grate magnets offer efficient,
economical magnetic protection of processing equipment while
improving product purity.
•
•
•
square, rectangular or round configurations
four different styles, depending on product flow characteristics
multiple magnetic rows, non-standard row spacing and powerful
Rare Earth magnet energy design options
Magnetic tubes (MT series) are used to remove small-to-medium
size ferrous tramp metal from a variety of product streams to
improve product quality and protect processing machinery.
rare ea
r th
+
ceram
m a g n ei c
ts
=
SUPER
-HOLD
HYBRI
D
Do you require maximum
tramp metal protection?
MPI now provides hybrid “power
booster” magnets in many of its
magnetic separators. Hybrid
magnets, offered exclusively by
MPI, combine the exceptional
holding power of Rare Earth
magnets with the outstanding
reach-out of ceramic magnets.
By “marrying” these materials,
MPI’s hybrid magnets offer
unparalleled product protection
and tramp metal control.
Standard Products for the Feed, Grain and Milling Industries
Equipment for the
Feed, Grain and Milling industries
drum magnets
Magnetic drum separators and housing (DSH series) provide
trouble-free automatic extraction of tramp iron from heavy
flows of abrasive and large-sized materials such as sugarcane,
corn and others.
mean
higher profits
better products
metal detectors
MPI offers a complete line of next-generation Cassel metal
detectors, featuring “Four-Quadrant” technology. Integrated FourQuadrant technology allows Cassel equipment to readily adjust
settings to detect metals in even the most “difficult” products. To
ensure maximum performance, users are taken through a series of
easy-to-follow, step-by-step, high-graphic screens to set standards
for product testing. By finding even the smallest particles of ferrous,
nonferrous and stainless steel contaminants, Cassel metal detectors
assist food manufacturers to meet HACCP, IFS, BRC and GMP
safety standards. Able to meet the needs of a variety of applications
in harsh production environments, equipment models can be
installed on conveyor lines or onto gravity feed pipes. MPI also
offers a complete line of checkweighers.
suspended permanent magnets
Suspended permanent and electromagnetic separators produce the
most effective removal of unwanted tramp iron from heavy burdened
depths of material being conveyed on a fast moving conveyor belt.
Captured tramp metal accumulates across the entire magnetic face,
substantially increasing the amount of metal contaminant that can be
retained. Equipment is built for extremely rugged environments.
Have a question about
Magnets, Metal Control
or Material Handling products?
Ask the
Magnet Man
www.mpimagnet.com
About Magnetic Products, Inc. (MPI)
Magnetic Products Inc. (MPI), based in southeastern Michigan, is a worldwide provider
of both magnetic and non-magnetic material handling solutions. MPI leads the industry
by continually engineering inventive magnetic equipment and advancing customer
education, through significant investments in research and development and proactive
product training. For over 30 years, MPI has implemented a business model that
combines technologically superior equipment with industry-leading customer service.
MPI interacts closely with its customers
DISTRIBUTED BY:
and expands its offerings to meet the
changes of a dynamic marketplace.
For further information,
visit www.mpimagnet.com.
MPI Products for Feed, Grain and Milling Industries March 2012 © Magnetic Products, Inc.
&
quality and safety
• powerful permanent ceramic 8 (standard) or optional Rare
Earth magnet material
• standard sizes: 12” dia. to 36” dia. and widths from 12” to 60”
Free Magnet
Audits
Magnetic Products, Inc. offers free magnet audits to
ensure magnetic separators meet the standards
and requirements of our
industry and customer
base. These audits serve
as HACCP documentation as well as meet plant
requirements for QA standards for a variety of safety
standards, including IFS,
BRC and GMP.
MPI
provides magnetic separators and metal detectors used throughout feed,
grain and flour-milling facilities to remove metal contamination from products
and prevent tramp iron from damaging processing equipment. MPI designs, engineers
and builds a full range of magnetic separators including plate magnets, drawer magnets,
drum magnets, free-flow magnets, grate and tube magnets, magnetic chutes, separation
rolls and suspended permanent magnets. MPI also offers a full line of Cassel metal
detectors and checkweighers.
Free Testing for
Metal Detector
Applications
Magnetic Products, Inc.
(MPI) offers free in-house
testing for metal detector
applications. MPI’s
laboratory houses state-ofthe-art metal detectors and
other testing equipment.
Magnetic Products, Inc.
P.O. Box 529 • 683 Town Center Dr. • Highland, MI 48357 USA
P 800.544.5930 • F 248.887.6100 • www.mpimagnet.com • [email protected]