MGC cat. 2005.indd

READING TIP
when browsing through
this catalogue it is easier
using two-up view
(viewing the left & right side next to each other)!
FOR BEST RESULTS
DO NOT
PRINT THIS PAGE!
This page will interfere with the
correct page order when printing
recto-verso.
The illustrations and photo’s in our catalogues and on our website are protected.
It is illegal to copy these in any way or by any means.
You are permitted to print the pages for personal use only.
Quality Parts & Service
MGC 1967-1969
PARTS & ACCESSORIES CATALOGUE
F o u r t h E d i t i o n • 1 9 0 . 1 5 8 Quality Parts & Service
MGC 1967-1969
PARTS & ACCESSORIES CATALOGUE
fill your customer number
in for easy ordering
www.angloparts.com
please visit our website for all contact information
Anglo Parts Shops
MAIN BRANCH BELGIUM
HOLLAND • ITALY • GERMANY
Authorized Anglo Parts Dealers
FRANCE • HOLLAND • SPAIN
SWEDEN • FINLAND
CZECH REPUBLIC • SLOVAKIA
LUXEMBOURG • POLAND • HUNGARY
All Rights reserved. No part of this publication may be reproduced or absorbed
in any catalogue or information system by any means, Mechanical, photographic,
electronic or otherwise, without prior express written consent of Anglo-Parts n.v.
F o u r t h E d i t i o n • 19 0 . 1 5 8
• Updated December 2007 • © Anglo Parts nv 2007
Important information
IMPORTANT POINTS
The general policies of our business are printed on the reverse side of our invoices and are on our web site. Updates are printed in the most recent catalogues and price lists and are
updated on the web site. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed
all previous. Please read below, the most important points.
OUR SALESMEN
We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthusiasts who like to help. For technical information, we recommend you
use the books listed in this catalogue.
OUR CATALOGUES/WEBSITE
We have made every effort to make sure that the information in our catalogues and on our web site is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in
specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our web site are only representations, products supplied
may vary from illustrations and photo’s, but will function the same way with similar quality.
OUR PART NUMBERS & PRICES
All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity
you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed
on the web site or in our price lists. Information will be sent to you on request. Prices shown on the web site and in the price lists are for one item and information only and are subject to
change without prior notice. Prices on the web site can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this
is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for
washers, etc. The condition of the part we sell is indicated on the web site and in the price list. The following codes will appear on the web site in the catalogue parts lists and on the price
lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently
NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required
can vary from application to application. USE - the part number has been replaced by an other part number indicated.
ORDERS
Orders are welcome through the WEB SITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch.
For orders not made through our Web site, can we please ask you to prepare the following, using our ORDER FORM.
- Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscal (for Italian customers only) or VAT number for
European companies.
- Specify if shipping address is different.
- CAR TYPE INFORMATION, make, model, year build etc.
- Provide Anglo Parts PART NUMBERS only.
- Indicate the quantity desired and parts description.
- Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank.
- Once an order placed, we put this in the computer system and the processing of labels, lists and checking lists will follow. Changing an order already placed, will hold
up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you
for your understanding.
PAYMENTS
CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number (mostly 16 figures), expiring
date and name as appears on the card.
BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice
(Not for Web site) number and our bank references. Please note the invoice number and your customer number with any payment you do.
NATIONAL: INTERNATIONAL:
SHIPMENT
We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used.
We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and
fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted.
Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made
within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.
RECEIVING YOUR GOODS
For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in
accordance with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the
transport company immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the
final check must be made by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with
checking the goods until you actually need them and report problems within three days of receiving the goods.
WARRANTY
Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods
for approval but we are not able to inspect each individual product. It is the responsibility of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical
parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and
reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty
installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value
must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the
part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer
when we have received the goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period
for reconditioned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original
equipment manufacturer or by Anglo Parts nv for a period of one year starting with the date on the invoice.
RETURNS
If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be
accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels
etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of
arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do
not refund the value of credit notes.
SURCHARGE - CORE DEPOSITS
A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the web site in the catalogue parts lists and is listed in our price list near
the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained
of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old
unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please
make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately
check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is
the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system.
In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.
BACK ORDERS
Goods which are not in stock at the time of your order will be kept in back order. We will inform you when these are available again and parts will be reserved for you for a period of
fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you
can also specify “No Back orders” or ask us to cancel all previous back orders. When a part you had on back order becomes obsolete, we will let you know as well. If you decide to take
this part in used condition, please ask us and we will do our best to obtain it, if possible.
©
V a n
G e s t e l
B & C
2 0 0 5
1
Belangrijke informatie
BELANGRIJKE PUNTEN
De verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze web site. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze
web site bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal
alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.
ONZE VERKOPERS
We zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken
uit de lijst in de katalogus aan.
ONZE KATALOGI
Geen inspanning was ons te groot de juiste informatie in onze katalogi en op onze web site te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden
i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze web site zijn slechts
voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.
ONZE ONDERDEELNUMMERS EN PRIJZEN
Alle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagt
kan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen
die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze web site. De prijzen in onze prijslijsten
en op onze web site zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W.
vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162
voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de web site vermeld of kan worden herkend aan het nummer. De volgende kodes zullen
in de prijslijst en op de web site naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden
aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant.
A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.
BESTELLINGEN
U kan altijd bestellen via onze web site, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze web site gebeuren gelieve rekening
te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt:
- uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven;
- specifieer als het leveringsadres verschilt;
- informatie over de auto, merk, model, bouwjaar, enz.;
- gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken;
- geef het aantal stukken aan en beschrijf de onderdelen;
- duid de betaalwi jze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD.
- Eens uw beselling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil
wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.
BETALINGEN
Kredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD.
Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.
Bank: (Niet voor bestellingen via onze web site) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)
VERZENDING
Nationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.
Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u
in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko
op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen
tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling
ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op
risiko van de koper.
ONTVANGST VAN DE GOEDEREN
Gelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de
vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur
en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer
tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij
ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen
tot u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.
DE WAARBORG
Bijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk
zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische
produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing.
De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een
komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten
naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten
bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald,
zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd
door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.
TERUGZENDEN
Wanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde
van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers,
zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met
de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en
de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.
SUPPLEMENT
Een supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze web site naast het betrokken onderdeelnummer
en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie
en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u
ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen.
Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen.
Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met
het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor
ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van
de krukas terugbetalen.
BACK ORDERS
De goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “back order”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren
de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze
onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen back orders” of ons vragen alle vorige te annuleren. Als een onderdeel in “back order” niet meer kan
worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.
2
©
V a n
G e s t e l
B & C
2 0 0 5
Informations importantes
Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.
LES POINTS IMPORTANTS
Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous,
vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes.
Vieillez lire les points les plus importants, mentionnés ci-dessous.
NOS VENDEURS
Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider.
Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.
NOS CATALOGUES
Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la
spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.
NOS NUMEROS DE PIECE ET LES PRIX
Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être
différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces
non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent
seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix.
Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates.
L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme
nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du
siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le
numéro de pièce a été remplacé par le numéro indiqué.
Vous pouvez
-
-
-
-
-
-
LES COMMANDES
toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande:
votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises;
spécifiez si l’adress de livraison est différente;
informations sur la voiture: la marque, le modèle, l’année de construction, etc.;
utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement;
donnez le nombre des pièces et décrivez les;
indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur.
Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.
La carte de crédit:
La Banque:
LES PAIEMENTS
Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte.
Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)
L’EXPEDITION
National: nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit.
International: nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE
si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque
d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire
les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et
le transport se passe au risque de l’acheteur.
LA RECEPTION DES PRODUITS
Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement
en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur.
Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des
produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les
produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.
LA GARANTIE
Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les
produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques
pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces
est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la
suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin
d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les
produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit
d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris
en considération de vérification.
LA REEXPEDITION
Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez
noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits
au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a
déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du
pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.
LE SUPPLEMENT
Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé
en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez
aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec
votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au
paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les
points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité,
est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un
arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).
LES “BACK ORDERS”
Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “back order”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous
vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont
plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de back orders”, ou bien nous demander d’annuler tous les “back orders” précédents. Si nous ne pouvons plus
livrer une pièce en “back order”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.
©
V a n
G e s t e l
B & C
2 0 0 5
3
Wichtige Auskünfte
1. EINFÜHRUNG
Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die
Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit
Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen
Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn
Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster
Stelle stehen sollten.
2. ALLGEMEINE GESCHÄFTSBEDINGUNGEN
Wir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind.
Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese.
Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf
die Verträge.
3. TECHNIK
Für technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen,
diese dienen lediglich der Darstellung unserer Waren.
4. KATALOG
Wir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der
Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche
entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder
nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen
als solche bezeichnet werden.
5. ERSATZTEILNUMMERN UND PREISE
Alle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des
jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie
die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile
stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise
beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils
an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die
folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert,
und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf
der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die
Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.
6. AUFTRAGSERTEILUNG
Sie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre KundenNummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich).
- Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht.
- Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw.
- Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden.
- Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an.
- Geben Sie die Art der Zahlungsweise an.
- Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.
7. ZAHLUNGSWEISE
Sobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer
und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen
Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die
Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.
8. VERSENDUNG
Da der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung
beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware,
die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher
bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für
den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie
den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden.
Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die
letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.
9. RÜCKSENDUNGEN
Wenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen
erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine
Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe,
Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit
denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die
Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.
10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASIS
Für Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden
Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis
wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem
Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus
dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den
Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen
diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen
aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch
wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten.
Insoweit führen wir eine Schätzung durch.
11. NACHLIEFERUNGEN
Waren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das
Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine
Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil
nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender
Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.
4
©
V a n
G e s t e l
B & C
2 0 0 5
Allgemeine Verkaufs- und Lieferbedingungen
Allgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar
1.
Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich
zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im
Einzelfall nicht ausdrücklich widersprochen wurde.
2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern
noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines
Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts
zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).
Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet werden,
nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)
3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat
der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren
Verzugsschadens bleibt vorbehalten.
4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich, spätestens
innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben bei uns geltend
zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir lediglich zur Nachbesserung
bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir behalten uns die Überprüfung etwa
gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor dessen Prüfungsergebnis vorliegt. Nach
endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt. Gewährleistungsansprüche entstehen nicht,
wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder
nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den Liefergegenstand sowie Schäden aus sportlichen
Einsätzen.
5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind
ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.
6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit
dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen
Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen)
unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.
7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung
einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen
ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile
abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.
8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser
Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das
entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine
Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils
wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.
9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei
Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung
für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.
10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich
das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine
Anwendung.
11
Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch
die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der
wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen
Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.
12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich
für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.
©
V a n
G e s t e l
B & C
2 0 0 5
5
Informazioni importante
INFORMAZIONI IMPORTANTI
Le condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di
vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.
I NOSTRI VENDITORI
Non sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri
tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.
I CATALOGHI
Ci impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o
mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.
Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.
La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da
moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.
I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi
possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa.
Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come:
SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile.
LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione).
USE: il numero di articolo è stato sostituito dal numero indicato.
ORDINI
Accettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue:
- indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte;
- specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione;
- completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc.
- usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine.
- indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi.
- indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.
PAGAMENTI
Carta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre,
la scadenza, il badge code ed il nome del “titolare” della carta.
Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso,
sarà nostra premura spedire il materiale non appena arrivato il pagamento.
Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.
SPEDIZIONE
Effettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura,
essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine
di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare
comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale
fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.
RICEVIMENTO DELLA MERCE
Siete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale:
firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto.
Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi
meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.
GARANZIA
Anglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima
del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del
montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo
valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati
per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di
7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un
montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.
RISPEDIZIONE
Accettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene
detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).
Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.
SUPPLEMENTO
Alcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio.
Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico
vostro.
BACKORDERS / ORDINI ARRETRATI
I prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede,
provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale
da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o
tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.
6
©
V a n
G e s t e l
B & C
2 0 0 5
How to read and use the part number lists
GB
ILL n°.
Part n°.
QTY
DESCRIPTION
illustration number
Part number
Quantity required
Part description
Illustration number
Exceptions: If a part has no
illustration number it is because
there are several kinds of the part
in question.
e.g. Left and right hand
door panel.
Part number
Exceptions: A part number
may be missing if the part
is no longer obtainable or in
production.
Necessary quantity:
ATTENTION: indicated here is the
quantity of units necessary and not the
quantity of units which are supplied per
order/delivery.
Our parts are sold per unit.
Part description
With dimensions of screws, bolts, cables, etc.
Information about carburetters, electricity etc.,
details about books giving more information
about the part itself: original, reproduction,
reconditioned, etc.
Onderdeelnummer
Uitzonderingen: Een onderdeelnummer kan onbreken
waarneer dit stuk niet meer te
verkrijgen of in produktie is.
Nodige Hoeveelheid
LET OP: Hier wordt de hoeveelheid
stuks die nodig zijn vermeld en niet de
hoeveelheid stuks die worden geleverd
bij bestellingen. Onze onderdelen
worden verkocht per stuk.
Onderdeel beschrijving
Met maten van schroeven, bouten, kabels enz.
Informatie over carburateurs, elektriciteit enz.
Details over boeken die meer informatie geven.
Informatie over het onderdeel zelf: origineel,
reproduktie, gerestaureerd enz.
Numéro de la pièce
Exceptions: Si ce numéro n’est
pas indiqué, c’est parce que
cette pièce n’estplus disponible
ou qu’elle n’est plus en
production.
Quantité nécessaire:
ATTENTION: Sous cette rubrique,
on mentionne la quantité de pièces
qu’il faut et non la quantité de pièces
livrées lors de la commande. Nos pièces
détachées se vendent à l’unité.
Description de la pièce:
Comporte les dimensions des vis, écrous, câbles
etc. Des reseignements au sujet de carburateurs,
électricité etc., des détails concernant des livres
informatifs. Des renseignements au sujet de
la pièce même: pièce d’origine, reproduction,
pièce révisée etc.
Nummer des Ersatzteils:
Ausnahmefall: Mangelt diese
Nummer, dann ist dieser
Einzelteil nicht mehr verfügbar
oder wird er nicht mehr
hergestellt.
Benötigte Menge:
Achtung! Unter diesem Titel wird
die Menge der benötigten Einzelteile
angegeben, sondern nicht die Menge
der bei Bestellungen gelieferten
Einzelteile. Unsere Einzelteile werden
stückweise verkauft.
Beschreibung des Ersatzteils
Betrifft die Abmessungen der Schrauben,
Mutter, Kabel, usw.; Auskünfte über Vergaser,
Elektrizität, usw. Einzelheiten über InfoBücher, Auskünfte über den Einzelteil selbst:
Originaleinzelteil, Reproduction, überholter
Einzelteil usw.
in produzione.
Quantità necessaria
AVVERTENZA: La quantità di pezzi
necessari è data, e non la quantità di
pezzi consegnati dopo ordinazioni. I
nostri componenti vengono venduti
al pezzo.
Descrizioni componenti
Con misure di vite, bulloni, cavi ecc. Informazione
su carburatori, elettricità ecc. dettagli su libri che
danno ulteriore informazione. Informazione
sul componente stesso: originale, riproduzione,
revisionato ecc.
NL
Illustratie nummer
Uitzonderingen: Een onderdeel
heeft geen Illustratie nr. omdat
er meerdere soorten van het
bestaande stuk zijn.
vb. Links en rechts deurpaneel
F
Numéro illustration
Exceptions: Si une pièce détachée
ne comporte pas de numéro
d’illustration, c’est que la pièce
existe en plusieurs versions.
Exemple: Panneau de
porte gauche - droite.
D
Abbildungsnummer:
Ausnahmefall: Wenn ein Einzelteil
keine Abbildungs-nummer hat,
ist das, weil der Einzelteil in
mehreren Fassungen besteht.
Beispiel: Linke - rechte
Türfläche.
I
Numero illustrazione
Eccezioni: Un componente non
ha un numero illustrazione
perchè ci sono vari tipi del pezzo
esistente.
P. es. Pannello porta destro e
sinistro.
©
V a n
G e s t e l
B & C
2 0 0 5
Numero componente
Eccezioni: Può succedere che
non c’è un numero componente
quando il pezzo non è più
disponibile o quando non è più
7
Wire wheel balancing
GB
D
How to balance centre
lock wire wheels
Das Auswuchten von Speichenrädern mit zentral Verschluss.
The diagrams show the centre spline of a wire
wheel attatched to a balancer.
Diagram A is the correct method of locating
the wheel.
Diagram B shows the wrong method.
Die abbildungen zeigen die Nabe eines ZV-Speichenrades auf einer Auswuchtmaschine montiert.
Abbildung A: Die richtige Montage. (Nabenteller
berührungsfrei, außen sitzender Außenkonus ) .
Abbildung B: Hier ist die Nabe falsch montiert!
(1) (2) (3) (4) (5) (6) (7) (8)
(9) Balancer lock nut
Splined hub
Sprung cone
Mounting face of balancer
Locate only at these external points
Locate only at these points
Do not locate at these internal points
Do not locate at these points
Inner cone with distance piece
POINTS TO CHECK
The original high degree of balance may be affected by
wheel damage as well as by factors related to the tyres
uneven tread wear, cover or tube repairs etc. If roughness
or high speed steering trouble develop, and this cause is
not disclosed by mechanical investigation, then the complete
tyre and wheel assembly should be checked for balance.
(1) A ußen übergreifender Wuchtkonus
(2) S peicherad-Nabe
(3) Innenkonus mit Distanzstück “i”
(4) A nlageplatte der Wuchtmaschine
(5) H ier über Original-Außenkonus spannen
(6) H ier über Original-Innenkonus spannen
(7) N icht über Innenkonus führen
(8) D er Nabenteller darf die Anlageplatte nicht berühen!
(9) D istanzstück, zur Verhinderung von Punkt “H”
Überprüfungspunkte: (Hinweise)
der ursprünglich gute Rundlauf eines Rades kann sowohl durch
eine Beschädigung des Rades als auch durch unleichmäßige
Reifenabnutzung, Schlauchreparaturen oder ungenau gefertigte
Neureifen etc. beeinträchtigt werden. Wenn vibrationen auftreten,
deren Ursache nicht zweifelsfrei in der Mechanik liegen, solte das
komplette Rad mit reifen ausgewuchtet werden.
It is IMPERITIVE that the hubs are located on the balancing
machine in exactly the same manner as located on the
car and the factory truing jigs. Alternatively, balance on
the vehicle, this operation can only be done on the front
wheels of your car.
Es ist absolut unumgänglich, dab die Râder auf der
Wuchtmaschine genauso gespannt werden wie am Wagen selbst.
Bei Bedarf sind die erforderlichen Spannwerkzeuge über MWS
zu bezichen. Alternativ ist es möglich, die Räder elektronisch
am Wagen zu wuchten, was jedoch nur an nicht angetriebenen
Achsen möglich ist.
F
NL
I
COMMENT EQUILIBRER
DES ROUES A RAYONS
Het uitbalanceren van een
“centre lock” spaakvelg
COME BILANCIARE
RUOTE A RAGGI
Le dessin montre le moyeu d’une roue fixée
sur une équilibreuse.
LE SCHEMA A
indique la méthode de fixation correcte.
LE SCHEMA B
indique une fixation incorrecte.
Illustraties:
SCHEMA A
Dit is de juiste wijze van balanceren.
SCHEMA B
Op deze foute wijze krijgt men afwijkende
meet gegevens.
(1) Equilibreuse, écrou de vérouillage
(2) Moyeux
(3) Cone ressort
(4) Montage Avant de l’équilibreuse
(5) Placer seulement sur ces points exterieurs
(6) Placer seulement sur ces points
(7) Ne pas placer sur ces points interieurs
(8) Ne pas placer sur ces points
(9) ecartement afin d’éviter le contact sur point
(1) Balanceer moer
(2) Spaakvelg
(3) Binnencone met afstandstuk
(4) Montage plaat van balanceer apparaat
(5) Centreren op deze binnenste punten
(6) Op deze punten centreren
(7) Niet centreren op deze binnenste punten
(8) Niet op deze punten centreren
(9) Binnencone met afstandstuk
LES POINTS A OBSERVER ET VERIFIER:
La précision de l’équilibrage peut être affectée par une jante
détériorée aussi bien que par des pneus usés ou des tubeless
reparés, etc. Si la direction devient dure ou représente des
troubles à grande vitesse, et, où après verification, la cause
n’est pas mécanique, il convient de verifier l’équilibrage de
la roue.
Belangerijk is de wijze waarop de spaakvelg op het
balanceer apparaat opgespannen wordt.
Zie illustratie A en B.
IL EST IMPERATIF de respecter le schema A lors de
l’installation sur l’équilibreuse. On peut aussi équilibrer les
roues avants seulement sur le vehicule, à l’aide d’un appareil
adapte. Pour tous renseignements complementaires n’hésitez
pas à contacter
8
In verband met de garantie wordt aanbevolen de spaakvelg
zonder band op het balanceer apparaat op te spannen
en na te zien of de velg in balans is. De afwijking wordt
gemeten vanaf de rand waar de band tegen komt te liggen
met maximaal 2 millimeter afwijking. Als deze afwijking
minder is, dan kan de band op de spaakvelg gemonteerd
worden en het geheel uitgebalanceerd worden.
Il disegno mostra il mozzo d’una ruota
fissata su una macchina da bilanciare.
LO SCHEMA A indica il metodo corretto
di fissare una ruota.
LO SCHEMA B
mostra il metodo scorretto !
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Un dado di fermo
Mozzo
Pezzo conico sporgente
Disco di montaggio della macchina da bilanciare
Mettere soltanto sui punti esteriori
Mettere soltanto su questi punti
Non mettere su questi punti interiori
Non mettere su questi punti
Separazione per evitare il contatto con il punto
La precisione del bilanciare diventa meno sicura a causa
di un cerchione danneggiato, di pneumatici usati o di
gomme riparate, etc. Se la conduzione diventa difficile o
presenta dei problemi a grande velocità e, doppo la verifica
mecanica, la causa non è questa, è necessario verificare
il bilanciare della ruota. È necessario rispettare lo schema
A durante l’instalazione sulla macchina da bilanciare. Si
può bilanciare soltanto le ruote anteriori sulla macchina,
per mettere di un apparecchio adatto.
©
V a n
G e s t e l
B & C
2 0 0 5
Index
A
Accelerator cable
Air filter
Air intake grill
Alloy wheel
Alternator
Aluminium rocker cover
Angle drive
Anti-freeze
Ash tray
ATF oil
Automatic transmission
B
Badge clamp
Battery cable
Battery
Blanking plugs
Body panels
Bonnet cable
Bonnet moulding
Bonnet
Books
Boot lid
Boot rack
Brake calliper
Brake disc
Brake drum
Brake fluid
Brake hoses
Brake improvements
Brake pedals
Brake pumps
Brake switch
Bumper mounting kits
Bumpers
16
10, 22
20, 66
91
54
14
58
19
78
32, 91
21
71
60
54
85
64-65
66
66
66
93
66
82
46
46
44
36, 39
42
88
37
38-39
42
72
72
C
Camshaft
Carburettor oil
Carburettors
Carpet sets
CD-rom
Chassis plate
Choke cable
Cigar lighter
Close ratio gearkit
Clutch hydraulics
Clutch
Cockpit rail cover
Coil, ignition
Condensor
Contact set
Conzoll radio speaker
Copper grease
Crankshaft
Cylinder head
12
22
22
80
93
92
16
58
87
36
15
78
10
10, 54
10, 54
78
52
11
12
D
Dashtop recovering kit
Direction indicator
Distributor
78
56-58
54
©
V a n
G e s t e l
B & C
2 0 0 5
D continued
Door fittings
Door glass
Door handle
Door hinge
Door seal finishers
Door seal
Door steps
E
Emission control
Engine mountings
Engine paint
Engine parts
Exhaust manifold
Exhaust system
Expansion tank
68-71
70
68
68
68
79
79
18
16
10
11
17
17
19
F
Facet fuel pump
Fan belt
Fan
Filler cap
Flasher box
Flasher unit
Floor
Fog lamp
Formula Power lead set
Frame, hood
Front brakes
Front suspension
Fuel pump
Fuel tank
23
19
19
23
56
60
65
63, 91
87
81
46
33-35
23
23
G
Gasket set, engine
Gear lever gaiter
Gear lever knob
Gearbox mountings
Gearbox oil
Gearbox
Girling servo
Glue
Green brake pads
Grill
Grommet kit
Grose jet
GT specials
10
78
26, 78
16
24
24-27
40
78, 80
88
72
85
22
84
H
Handbrake
Hard top
Headlamp cowls
Headlamps
Headlining kit, GT
Heater installation
Heater motor
Heater radiator
Hood cover
Hood
Horn
44
83
91
62
79
20
20
19, 20
82
81
60
I
Identification plates
Inlet manifold
92
17
J
Jack
52
K
K&N air filter
Kenlowe fan kit
King pin set
22
88
35
L
Lead kit
Letterset
Lights and lamps
Lock fitting kit, door
Lock set
Lockheed servo
Lumenition ignition
10
66
60
69
66, 68
41
55
M
Map pocket
Mirrors, exterior
Mirrors, interior
Moto-lita steering
Mouldings
79, 80
69, 76
74
47, 90
64
O
Oil cooler
Oil filter conversion
Oil filter
Oil
Overdrive switch
Overdrive
Overriders
15
87
10, 14
10
27
30
72
P
Pedal rubber
Polyurethane bushes
Propellor shaft
Punch & bed kit
R
RAC badge
Radiator
Rear axle
Rear brakes
Rear suspension
Reverse lamp
Reverse light switch
Rotor arm
Rubber grease
S
Safety belt
Seats
Sebring spoilers
Servo
Shock absorber, front
Shock absorber, rear
Silicone brake fluid
36
89
29
82
71
19
50
44
49
60
26
10
36, 39, 44
S continued
Silicone spray
52
Sill
65
Slave cylinder
36
Spark plug
10
Speedometer cable
56-58
Spot lamp
63
Starter motor
54
Starter motor, modern type
87
Steering column
47
Steering lock
47
Steering rack
48
Steering wheel
47
Steering wheel, Moto-Lita
90
Stickers
92
Stop light switch
42
Sun visors
74
Superflex bushes
89
Switches, dashboard
56-58
Synchro ring, gearbox
25
T
Tailgate GT
Temperature transmitter
Thermostat
Tonneau cover
Tool and jack bag
Tool bag
Trim panels
66
12, 58
12
82
80
52
79
U
Union jack Universal joint
Universal joint, steering
92
29
47
V
Vacuum unit, distributor
Valve, heater
Voltage stabilizer
54
19
56-58
W
Walnut veneer dashboard
Water pump
Weber parts
Wheel cylinder
Wheel nut
Wheels
Window regulator
Windscreen washer kit
Windscreen
Wings, front/rear
Wiper motor
Wire wheels
Wiring loom
Workshop manual
82
77
91
40-41
33
49
36, 39
9
90
19
86
44
52
52
70
76
74
64
60
52
60
24
Engine, most important parts
Penrite oils
See your local
Anglo Parts
dealer for more
information
ILL N° PART N°
QTY DESCRIPTION
4 016.185 1
5 016.186 1
6 016.191 1
7 016.036 1
8 300.522 2 300.501 2 9 011.137 1 10 101.165 2 10
Head gasket set , all gaskets necessary to change a cylinder head incl.
(Not included are the exhaust sealing rings, 111.003)
Conversion gasket set (included are all gaskets for the bottom engine part)
Oil seal, front
oil seal, rear
1 Gallon Castrol classic engine oil (4.5 L.)
5 L. Penrite classic 20W60 engine oil
Capacity when oil cooler is fitted 7.3L.
Oil filter element & seals
Air filter element
ILL N° PART N°
11 12 13 14 15 16 17
18 QTY DESCRIPTION
012.058 6 081.163 1 081.161 1 081.017 1 081.016 1 081.171 1 181.055 1
081.001 1
186.146 A/R 187.069 A/R Spark plugs
Cap, distributor
Rotor arm
Condensor
Contact set
Lead kit
Silicone blue H.T. lead set
Ignition coiI
1 L. ENGINE PAINT
400ML. ENGINE PAINT, SPRAY
©
V a n
G e s t e l
B & C
2 0 0 5
Engine, most important parts
ILL N° PART N° QTY DESCRIPTION
BEFORE REBORING: USE THE WORKSHOP MANUAL FOR THE CORRECT BORE DIMENSIONS
1 014.160 1 PISTON SET - STD (Bore 83.36 mm)
014.162 1 Piston set - .020” (0,508 mm)
014.163 1 Piston set - .030” (0,762 mm)
014.164 1 Piston set- .040” (1,016 mm)
014.166 1 Piston set - .060” (1,524 mm)
2 014.170 1 PISTON RING SET - STD
014.172 1 Piston ring set - .020”
014.173 1 Piston ring set - .030”
014.174 1 Piston ring set - .040”
014.176 1 Pistonringset-.060”
3 014.167 6 One PISTON LINER
4 015.082 1 MAIN BEARING SET - STD
015.083 1 Main bearing set - .010”
015.084 1 Main bearing set - .020”
015.085 1 Main bearing set - .030”
5 013.075 1 THRUST WASHER SET - STD
013.076 1 Thrust washer set - .005”
013.077 1 Thrust washer set - .010”
6 015.086 1 CON ROD BEARING SET - STD
015.087 1 Con rod bearing set - .010”
015.088 1 Con rod bearing set - .020”
015.089 1 Con rod bearing set - .030”
7 013.177 6 Con rod assembly
8 162.488 12 Con rod bolt
9 161.308 12 Nut, con rod bolt
10 013.180 6 Small end bush
11 013.176 1 REGROUND CRANKSHAFT, less bearings
013.212 1 New crankshaft, less bearings
12 172.242 2 KEY
©
V a n
G e s t e l
B & C
2 0 0 5
ILL N° PART N°
13
14
15
16 17
18
19
20
21
22
23
24
25
26
27 28 29
30
31
32 33 34 35
36
37 38
39
40
41 42 011.187
011.188
174.030
161.309 015.090
167.086
011.189 011.190
011.191
011.192
172.487
011.194
011.147
167.087
061.122 168.101 013.043
167.088
011.028
016.017 162.005 164.002 167.089
167.090
163.279 161.310
011.195
011.196
163.011 168.102 QTY DESCRIPTION
1
1
1
1
1
4
1
1
4
2
2
1
1
1
1
1
14
3
1
1
2
2
7
7
14 14
1
1
1
1
Pulley 29 G
Pulley 29 GA
Washer, lock TAB
Nut
Camshaft bearing set
Stud, UNC/UNF 3/16” x 7/8”
PLUG,dipstickboss
PLUG, chain tensioner oil feed
Dowel, front cover & rear plate
Oil gallery plug
Dowel, water pump
Plug, distributor gear oil feed
Core plug set
Stud, rear plate to crankcase
Tab,waterdrain
Washer, fibre
Bolt, main cap bearing
Stud, oil pump
Plate, fuel pump hole blanking
Gasket
Screw
Washer, spring
Cylinder head stud, long
Cylinder head stud, short
PLAIN WASHER
Cylinder head nut
Tube, oil stick
Oil lever indicator
Washer, plain
Washer, rubber
11
Cylinder head
12
©
V a n
G e s t e l
B & C
2 0 0 5
Cylinder head
ILL N° PART N°
QTY DESCRIPTION
1 012.144 1
2 012.186 1
3 016.189 1
4 012.187 1
5 163.010 7
6 162.125 7
162.123 7
7 172.243 3
8 011.197 2
9 016.187 1
016.185 1
10 012.188 1
11 012.150 1
12 011.007 1
13 012.010 1
14 012.189 12
012.190 12
15 012.151 12
16 172.244 12
17 012.025 12
18 161.008 12
19 012.191 6
20 012.192 1
21 162.073 7
22 164.002 7
23 012.193 1
24 012.194 6
25 012.195 6
26 013.175 6
012.038 6
013.175 6
012.038 6
27 012.159 6
012.160 6
28 012.152 1
29 012.042 24
30 012.196 12
31 012.032 12
32 013.173 12
33 013.213 12
34 013.181 12
013.214 12
013.215 12
35 012.198 1
012.161 1
013.224 1
36 172.245 1
37 013.216 1
38 164.002 3
39 162.005 3
40 013.184 1
©
V a n
G e s t e l
Cylinder head, Lead free
Original valve rocker cover
Gasket, rocker cover
Oil filler cap assembly
Washer, plain
Pan pozi screw 1/4” UNF X 5/8”
Pan pozi screw 1/4” UNF x 3/4”
(for ALLOY ROCKER COVER)
Clip, thermo pipe retainer
Bracket, engine sling
Head gasket
Head gasket set
Complete rocker shaft assembly
Rocker shaft
Plug screw, front
Plug screw, rear
Reconditioned rocker arm
New, rocker arm
Rocker arm bush
RIVET, PLUG, DRILLED HOLE
Adjusting screw
Adjusting nut
Dracket, rocker shaft (plain)
Bracket, rocker shaft (tapped)
Bolt
Washer, spring
Screw, shaft locating
Distance piece
Spring
Inlet guide (lead free or competition)
Inlet guide, STD
Exhaust guide ( lead free or competition)
Exhaust guide, STD
Inlet valve
Exhaust valve
Valve spring set
One valve cotter
Cup, valve spring, top
Cup, valve spring, bottom
Valve stem seal
Push rod
Cam follower, STD
Cam follower, oversize .254 mm
Cam follower, oversize .508 mm
New camshaft, STD
Reprofiled camshaft
Camshaft, fast road specifications
Key
Plate, locating
Spring washer
Screw
Timing chain
B & C
2 0 0 5
ILL N° PART N°
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
QTY DESCRIPTION
013.188 1
013.187 1
013.021 1
174.003 1
162.208 2
016.022 1
013.217 1
174.031 1
162.005 2
013.218 1
161.311 1
013.219 A/R
013.220 1
016.191 1
016.231 1
011.198 1
162.081 5
164.002 7
162.481 2
011.199 1
162.020 2
164.002 2
016.232 1
013.221 1
013.222 1
172.006 1
013.223 1
167.074 15
167.091 2
012.199 1
012.200 2
012.201 4
012.202 2
011.200 1
016.028 1
011.201 1
162.029 2
164.012 2
012.203 1
012.204 4
012.206 1
016.233 1
161.002 2
164.002 2
012.207 1
016.234 1
012.208 1
061.158 1
081.026 3
164.012 3
012.140 1
Camshaft gear
Crankshaft gear
T ensioner assembly
Lockplate
Bolt
Gasket
DAMPER, chain
Lockplate
Screw
Lock washer
Nut
Washer, shim
Oil thrower
Oil seal, front cover
Gasket, front cover
Cover, timing chain
Bolt, long
Spring washer
Bolt, short
Housing, distributor
Screw
Spring washer
Gasket
Thrust washer
Shaft, distributor gear
Key
Gear, distributor drive
Stud, manifold
Stud, water outlet
Plug, thermal transmitter boss
Injector, air (short) US
Injector, air (long) US
Washer, crushing
Blanking plate, heater outlet
Gasket
Elbow, heater outlet
Screw
Spring washer
Core plug
Core plug
82° Thermostat
Gasket
Nut
Washer, spring
Water elbow
Gasket, elbow to extension
Filler neck
Filler cap
Screw, UNC
Washer, spring
Temp. transmitter (USA only)
13
Oil pump & filter
1
ILL N° PART N°
QTY DESCRIPTION
1 185.744 1
6 011.202 1
7 016.235 1
8 162.020 5
9 168.028 5
10 016.035 2
11 011.026 1
12 011.203 1
13 162.490 2
14 168.103 2
15 011.204 1
16 016.236 1
17 162.030 13
18 164.002 13
19 011.205 1
20 011.206 1
21 011.137 1
22 162.491 1
14
Aluminium rocker cover with cap
& fixing kit
Cover and bracket
Gasket
Screw, 5/16” UNF
Washer, copper
Gasket
Central cover, plain
Cover and separator
Screw with seal retainer
Seal, ‘0’ ring
Cover, water manifold
Gasket, side cover
Bolts
Washer, spring
SPIN-ON, oil filter conversion kit
Oil filter, replacement
Oil filter
Centre bolt
ILL N° PART N°
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
168.104
011.207
171.002
163.021
168.018
011.070
172.037
016.042
011.208
011.209
011.210
011.211
168.020
011.212
013.183
016.237
163.014
164.006
162.218
013.182
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
Sealing washer
Container
Spring, pressure plate
Washer
Washer, felt
Plate pressure
Circlip
Sealing ring
Centre tube
Insert anchor
Plate, pressure
Filter adaptor
Washer, copper
PLUG
Valve oil pressure release
Gasket
plain washer
Spring washer
Bolt
Oil pump repair kit
ILL N° PART N°
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
013.225
016.238
011.214
164.012
162.208
167.088
164.002
161.002
162.474
164.002
016.188
011.215
164.002
161.002
163.011
162.029
011.216
017.140 168.105
©
QTY DESCRIPTION
1
1
1
3
3
3
3
3
3
3
1
1
4
4
25
21
1
1
1
Oil pump assembly
Gasket
Strainer, oil
Washer, spring
Bolt
Stud, oil pump to block (29G)
Washer, spring
Nut
Bolt
Washer, spring
Oil Pan gasket
Oil pan
Spring, washer
Nut
Washer, plain
Screw
Drain plug
Magnetic drawn plug
Washer, drain plug
V a n
G e s t e l
B & C
2 0 0 5
Oil cooler, clutch & flywheel
ILL N° PART N°
1
2
3
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
©
QTY DESCRIPTION
060.003
060.016
060.021
071.009
071.010
011.066
133.552
011.065
133.553
162.485
163.010
164.012
011.067
168.016
071.012
071.013
172.079
162.051
163.007
164.015
071.011
011.181
011.182
V a n
1
1
1
1
1
2
1
2
2
4
4
4
1
1
1
1
1
1
1
1
2
2
1
ILL N° PART N°
Oil cooler, engine - 13 ROW
Oil cooler, engine - 10 ROW
Oil cooler, gearbox - AUTOMATIC
Flexible, inner (long)
Flexible, outer (short)
Grommet, hose
Bracket, hose, cooler
Strap kit, hoses
Pedestal, oil cooler
Bolt
Washer, plain
Washer, spring
Union, adaptor
Washer, adaptor union
Pipe, automatic, short
Pipe, automatic, long
Clip, pipe
Screw
Washer
Washer, spring
Flexible, gearbox cooler to rigid pipe
Connector, automatic gearbox to pipe
Support block, pipes
G e s t e l
B & C
2 0 0 5
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
011.183
162.088
163.001
164.002
172.151
162.139
163.007
164.015
161.024
133.554
162.026
163.010
164.012
021.029
021.107
021.030
021.108
021.031
172.046
162.005
164.002
016.036
023.007
QTY DESCRIPTION
1
1
1
1
2
1
2
1
1
4
4
4
4
1
1
1
1
1
2
6
6
1
1
Cap, support block
Bolt
Washer, plain
Washer, spring
Clip, flexible pipe to gearbox
Screw
Washer, plain
Washer, spring
Nut
Distance tube, gearbox cooler
Bolt
Washer, plain
Washer, spring
Clutch cover
Fast Road clutch cover
Clutch plate
Fast Road clutch plate
Release bearing
Clip, bearing retainer
Screw
Washer, spring
Oil seal, crankshaft
Oil seal, gearbox
ILL N° PART N°
QTY DESCRIPTION
49 016.229 1
50 011.184 1
51 162.486 2
52 162.072 6
53 164.006 9
54 161.026 1
55 011.146 1
011.163 1
56 011.084 1
57 011.140 1
58 172.002 3
59 174.007 1
60 162.487 6
61 011.166 1
62 011. 185 1
63 174.029 4
64 162.045 8
65 161.002 8
66 011.186 1
67 011.165 1
68 011.164 1
Gasket rear plate
USE PRIOR TO CONVERSION SET 016.186
Plate assembly, rear engine mounting
Screw, long
Screw, short
Spring, washer
Nut
Crankshaft bush, manual
Crankstaft bush, automatic
Starter ring, manual
Flywheel assembly
Dowel pin
Lock plate
BOLT, FLYWHEEL TO CRANKSHAFT
Starter ring, AUTOMATIC
Plate, AUTOMATIC
Tab plate
SCREW
Nut
DRIVE PLATE assembly, automatic
Plate, support
Plate, crankshaft back
15
Engine mountings & control cables
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
101.178
101.179
101.079
101.180
101.181
133.543
133.544
101.078
133.545
101.022
101.077
164.002
162.128
172.237
101.076
16
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Accelerator cable, LHD
Accelerator cable, RHD
Choke cable, LHD
Choke cable, LHD (N. America)
Choke cable, RHD
Accelerator pedal, LHD
Accelerator pedal, RHD
Pedal stop, LHD
Pedal stop, RHD
BUSH
Tube distance
Washer, spring
BOLT
Cable fastener
Pad
ILL N° PART N°
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
101.024
162.060
162.480
164.015
161.028
011.065
172.054
162.271
101.081
164.022
163.033
171.024
172.238
172.239
011.144
QT
DESCRIPTION
ILL N° PART N°
1
2
1
1
1
1
1
1
1
1
1
1
2
1
2
GUIDE
SCREW
Bolt, cable to shaft
Washer, spring
Nut
Strap (to be adjusted)
Fastener
Screw
Cable abutment
Double spring washer
Plate, spring fixing
Spring
Clip, cable to bulkhead
Clip, kick-down cable, automatic
Engine mounting rubber
26
27
28
29
30
31
32
33
34
36
37
38
39
133.546
027.093
133.547
011.171
011.172
011.173
011.174
162.056
164.006
162.211
164.006
163.005
132.358
©
QT
DESCRIPTION
1
2
1
1
1
1
1
8
8
4
4
4
1
KIT, ENGINE MOUNTINGS FIXING
Gearbox mounting rubber
KIT, GEARBOX MOUNTING FIXING
RH engine mounting bracket
LH engine mounting bracket
RH restrictor
LH restrictor
Screw, bracket to engine
Washer, spring
Screw, cross member to body
Washer, spring
Washer, plain
Cross member
V a n
G e s t e l
B & C
2 0 0 5
Exhaust system
ILL N° PART N°
QTY DESCRIPTION
1 110.028 1
2 110.029 1
3 110.030 1
4 111.067 2
5 111.068 1
6 111.069 1
7 111.014 1
8 111.054 1
9 111.057 1
10 111.003 2
11 161.030 6
12 164.002 A/R
13 161.002 A/R
14 163.008 2
15 111.060 4/8
16 111.066 2/4
17 111.063 2
18 111.064 1
19 111.065 1
20 162.005 A/R
©
V a n
G e s t e l
FRONT PIPE
CENTRAL SILENCER
Rear silencer
EXHAUST CLAMP
FRONT FITTING KIT
FRONT mounting kit
INTERMEDIATE mounting kit
REAR mounting kit
Bracket (spotwelded on body),
rear exhaust bracket to body
EXHAUST PACKING
Brass nuts
5/16” spring washer
5/16” UNF, nut
plain washer
Washer, heat insulation
Mounting rubber
Bracket
Bracket, hanger
Saddle
Screw, 5/16” UNF
B & C
2 0 0 5
ILL N° PART N°
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
QTY DESCRIPTION
162.076 A/R
164.012 A/R
161.019 2
111.006 1
111.007 1
111.004 2
162.025 1
111.058 1
111.055 1
111.062 2
162.020 2
011.175 1
011. 179 1
011.180 1
162.085 4
162.096 4
163.001 8
164.002 8
011.177 2
011.073 1
168.023 1
Screw, 1/4” UNF
1/4” spring washer
Nut, 1/4” UNF
Intermediate mounting rubber
Intermediate bracket
Bush & isolator
Bolt
Bracket, hanger, rear
Bracket, rear
Saddle
Screw, 5/16” UNF x 1”
Inlet manifold, 29G
Connector, front hot spot
Connector, rear hot spot
Screw, long
Screw, short
Washer, plain
Washer, spring
Pech, welch
Adaptor, breather tube
Washer, fibre
ILL N° PART N°
QTY DESCRIPTION
42 011.178 1
43 110.106 1
44 110.107 1
45 016.190 1
46 011.176 1
47 167.084 4
48 016.228 2
49 110.108 1
50 110.109 1
51 161.002 4
52 164.002 4
53 167.074 15
54 163.014 15
55 161.307 15
56 167.013 6
57 167.085 6
58 200.481 1
200.482 1
59 200.554 1
Adaptor, servo
Front exhaust manifold, 29G
Rear exhaust manifold, 29G
Gasket, manifold to head
Inlet manifold, 29GA
Stud
Gasket, hot spot
Front exhaust manifold, 29GA
Rear exhaust manifold, 29GA
Nut
Spring washer
Stud, manifold to head
Washer, plain
Nut 3/8” UNF, brass-long
Stud, exhaust pipe
Repair stud, to repair an oversized
hole 7/16” UNC at manifold side and standard 3/8” UNF at exhaust side
3/8” UNC tap
7/16” UNC tap
8 mm drill
17
Emission control - USA
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
104.001
104.002
104.003
081.044
081.043
081.042
162.077
164.012
161.019
104.004
104.005
104.006
104.007
104.008
163.008
164.002
162.005
104.009
104.010
164.002
162.020
162.492
163.014
18
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
4
1
1
4
4
2
2
Valve assembly, emission control
Spring, top
Plunger
Diaphragm
Plate, valve cover
Clip, spring
Bolt, valve to bracket
Washer, spring
Nut
Pump assembly, air (less pulley)
Valve, pressure relief
Tube, intake
Tube, exhaust
Pulley, air pump
Washer, plain
Washer, spring
Screw, pulley to pump
Belt, air pump driving
Pulley air pump driving
Washer, spring
Screw, driving pulley to crankshaft
Bolt, pump to mounting bracket
Washer, plain
ILL N° PART N°
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
164.006
161.003
104.011
104.012
104.013
104.014
162.128
162.081
162.056
162.041
164.002
163.008
162.020
164.002
163.008
161.002
104.015
104.016
104.017
162.493
104.018
104.019
104.020
QTY DESCRIPTION
2
2
1
1
1
1
1
1
2
2
4
4
1
1
1
1
1
1
1
3
1
1
2
Washer, spring
Nut
Bracket, rear air pump mounting
Bracket, front air pump mounting
Link, adjusting
Bracket, adjusting link
Bolt, link to water manifold
Bolt, link and water pump to block
Bolt, rear bracket to block
Bolt, front bracket to front cover
Washer, spring
Washer, plain
Screw, link to bracket
Washer, spring
Washer, plain
Nut
Valve assemby, gulp
Valve, gulp
Bracket, gulp valve
Screw, self tapping
Tube, breather and gulp valve
Hose, control valve to separator
Hose, breather tube to valves
ILL N° PART N°
47
48
49
50
51
51
52
53
54
54
55
56
57
58
59
60
61
62
63
64
65
66
67
104.021
104.022
104.023
104.024
172.026
172.026
172.026
172.114
172.114
172.114
172.246
104.025
162.054
104.026
104.027
172.247
104.028
168.106
104.029
104.030
104.031
168.107
162.090
©
QTY DESCRIPTION
1
1
1
1
2
2
2
4
2
2
1
1
1
1
2
2
2
4
1
1
1
1
2
V a n
Hose, check valve to ‘T’ piece
Hose, gulp valve to ‘T’ piece
Hose, ‘T’ piece to air pump
Hose, air pump to air cleaner
Clip, hose control valve to separator
Clip, hose breather
Clip, hose gulp valve to breather tube
Clip, hose valve and pump to ‘T’ piece
Clip, hose gulp valve to ‘T’ piece
Clip, hose air pump to air cleaner
Clip, hose air pump
Bracket, air pump hose clip
Screw, self tapping
Manifold assembly, air
Banjo
Clip
Bolt, banjo
Washer, banjo bolt
Valve, check
‘T’ piece
Adaptor, control pipe to manifold
Washer, adaptor to manifold (fibre)
Screw, bracket to manifold
G e s t e l
B & C
2 0 0 5
Cooling & radiator
ILL N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
©
PART N°
062.027
062.028
172.240
060.019
060.063
061.107
132.359
132.360
133.548
133.549
133.550
132.361
061.108
061.109
061.110
061.111
172.149
061.112
061.088
061.113
V a n
QTY DESCRIPTION
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Radiator top hose
Radiator bottom hose
Clamp, wire type 42 mm
Radiator assembly, NEW
Radiator assembly, Aluminium
RADIATOR PLUG
RH radiator mounting bracket
LH radiator mounting bracket
RH radiator top bracket
LH radiator top bracket
RH radiator bottom bracket
Cowl for fan
Upper seating, seal
Lower seating, seal
Hose, tank to filler neck
Hose, tank to filler neck, N. AMERICA
Clip, hose to cowl
Expansion tank, NOT N. AMERICA
Filler cap
Clamp for expansion tank
G e s t e l
B & C
2 0 0 5
ILL N°
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
PART N°
061.114
061.115
061.116
061.117
061.086
016.223
162.481
164.002
168.098
162.482
061.118
168.094
061.119
168.099
062.081
172.......
063.069
172.241
063.070
061.120
QTY DESCRIPTION
2
1
2
1
1
1
5
5
1
1
1
1
2
2
1
1
1
2
1
1
Rubber pad
Expansion tank, N. AMERICA
Strap, expansion tank fixing
Channel. rubber packing
Water pump assembly
GASKET, WATERPUMP
BOLT
WASHER, SPRING
Washer, fibre
Screw, lubricator point
Adaptor for heater pipe
WASHER
Adaptor, by pass
WASHER
Hose, by pass
Clip
Connection hose, pipe to adaptor
Clip, hose
Pipe, water return
Pulley
ILL N°
40
41
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
PART N°
QTY DESCRIPTION
061.121 1
162.483 3
061.099 1
162.484 3
063.071 1
063.072 1
062.016 A/R 172.026 A/R 063.073 1
016.177 1
168.100 1
063.074 1
063.067 1
063.075 1
063.004 1
063.005 2
063.007 5
063.038 1
133.335 1
186.159 1
061.123 1
Spacer
Screw, spacer to pulley
Fan, 6 blade (plastic)
Screw, fan to spacer
Hose, heater to engine outlet
Hose, heater to heater pipe
1 Meter, heater hose
Clamp, wire type
Water valve, early type
Gasket
Ring, valve sealing
Valve mounting bracket
Water valve, late type
Valve mounting bracket
Radiator for heater
GROMMET, radiator pipe
Clamp, heater box
Dust seal, intake
Mesh, intake
4 L. anti-freeze
Fan belt
19
Heater installation
20
©
V a n
G e s t e l
B & C
2 0 0 5
Heater installation
ILL N° PART N°
QTY DESCRIPTION
1 063.164 1
2 133.093 1
3 133.092 1
4 063.167 1
5 162.061 4
6 063.007 5
7 063.004 1
8 063.101 1
9 121.281 1
10 063.005 2
11 121.243 1
12 121.028 1
13 063.038 1
14 133.335 1
15 082.043 1
16 133.091 1
063.126 1
17 172.637 1
18 162.051 3
19 164.015 3
20 163.013 3
21 085.006 1
22 085.007 1
23 085.008 1
24 162.125 1
25 164.012 1
26 163.011 1
27 162.060 4
162.051 1
28 164.015 5
29 163.011 5
35 172.056 4
36 162.135 4
37 134.098 1
38 172.055 1
39 122.002 1
40 063.028 1
133.581 1
41 172.023 2
42 162.134 2
43 172.058 2
44 172.059 2
45 164.016 2
46 161.055 2
47 163.034 2
©
V a n
G e s t e l
APPLICATION
Heater assembly
Heater box
Front cover heater box
Heater flap
Screw, heater flap fixing
Clip heater
Radiator
Felt pad kit radiator
Heater radiator foam
’67 on
Grommet radiator tube
Seal heater to body
Cut out part to fit
Seal, foam
Dust seal heater to body
Heater fan grille
Heater motor, late type
Runner standard
Runner improved
Clip runner fixing to motor
Screw, motor to heater box
Washer, spring
Washer, plain
Sticker smiths heater small
Sticker smiths heater large
Sticker smiths heater motor
Screw, heater top
Washer, spring
Washer, plain
Screw, heater to bulkhead
Screw, heater to bulkhead
Washer, spring
Washer, plain
Trunnion, heater cables
Screw, trunnion
Cable, heat control
USA plastic dash
Longest cable, can be cut to length
Clip, heater motor cables
Grommet, heat cable bulkhead
Control heat LHD cars
Europe
Control heat USA cars
Clamp cable to control
Screw for clamp
Clip for knob
Pin for knob
Washer, shakeproof
Nut, control fixing
Washer
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
48 172.057 2
49 063.031 1
50 063.076 1
55 063.029 1
133.582 1
56 134.021 1
134.098 1
57 172.023 1
58 164.015 1
59 162.051 1
60 063.032 1
61 063.077 1
66 141.022 1
67 133.868 1
68 172.033 6
69 172.233 6
70 133.090 2
71 162.061 8
74 063.035 2
75 133.883 1
76 . . . . . . . 4
77 063.034 2
78 133.086 2
79 172.447 2
80 165....
2
81 163.184 2
82 063.036 1
83 172.060 1
84 133.087 1
85 133.089 1
86 133.088 1
87 162.061 4
88 172.061 1
89 163.010 1
90 164.012 1
91 162.029 1
92 063.122 1
93 063.129 2
94 133.084 1
133.085 1
95 164.015 4
96 161.024 4
97 133.083 2
98 063.124 1
063.125 1
99 063.123 2
Rivet, knob position
Knob heat LHD European ‘63-’74
Knob heat LHD
Control air direction LHD Control air USA cars
Air control cable
Air control cable
Longest cable, can be cut to length
Clamp cable to heater flap
Washer, spring
Screw
Knob air LHD European ‘63-’74
Knob air LHD Air intake grille
Mesh, air intake grille, non original
Clip, air intake fixing
Fix blind, also use when you fix 67!
Heater, door outlet
Screw, heater door outlet
Tube, heater to elbow
Plate airtube to body
Screw, plate fixing
Elbow
Hose, alu/paper
Clip demister hose
Screw for clip
Cup washer, black
Tube drain
Clamp for tube drain
Fresh air door
Knob door
Seal door
Screw, door fixing to body
Spring, fresh air door
Washer, plain
Washer, spring
Screw
Foam, heater hoses to heater
Hose, plastic
RH demister nozzle Europe ‘63-’74
LH demister nozzle Europe ‘63-’74
Washer, spring
Nut, demister fixing
Escutcheon, Europe ‘63-’74
RH demister nozzle
LH demister nozzle
Escutcheon
APPLICATION
Only non illuminated knobs
USA
Europe
Metal dash
USA plastic dash
USA ‘63-’67
USA
Keeps out leaves!
USA
USA
USA ‘63-’67
USA
USA
21
Carburettors & filters
ILL N° PART N° QTY DESCRIPTION
ILL N° PART N° QTY DESCRIPTION
ILL N° PART N° QTY DESCRIPTION
1 102.246 1
102.247 1
102.248 1
102.249 1
102.250 1
102.251 1
102.252 1
102.253 1
2 102.254 1
3 102.255 1
4 102.259 2
5 102.261 2
102.262 2
102.263 2
6 102.216 2
7 102.072 2
102.156 2
8 102.107 2
9 102.237 2
10 102.264 2
102.281 2
11 102.113 2
12 102.265 2
102.266 2
13 102.050 4
14 102.267 1
102.268 1
15 330.070 1
16 200.572 1
17 185.124 2
18 185.012 2
101.102 2
19 186.043 1
20 186.042 1
21 101.163 1
101.164 1
22 101.165 2
101.166 2
23 101.167 2
101.168 2
24 161.305 2
161.306 2
25 168.008 2
26 101.169 2
27 016.222 2
28 101.170 1
101.172 1
29 101.171 1
101.173 1
30 171.024 3
31 101.174 1
32 101.175 1
33 101.176 1
34 101.177 1
35 102.275 1
22
1967-68, AUD 150, front carburettor
1967-68, AUD 150, rear carburettor
1969, AUD 341, front carburettor
1969, AUD 341, rear carburettor
1968 (USA) AUD 287, front carburettor
1968 (USA) AUD 287, rear carburettor
1969 (USA) AUD 342, front carburettor
1969 (USA) AUD 342, rear carburettor
Service kit for one pair carburettors
HS6, AUD 150 - AUD 341 or AUD 342
Rebuilding kit for one pair carburettors
HS6, AUD 150 - AUD 341 or AUD 342
Sundries kit, including small parts:
screws, springs, pins etc. (for 1 carb.)
Needle ST (AUD 150, AUD 341)
Needle KM (AUD 287)
Needle BAD (AUD 342)
Grose jet, improvement for the ‘SU’
needle and seat. This efficient fuel
cut-off is based on a ball system
Needle and seat
Improved needle and seat with viton head
Float
Gasket
Throttle spindle, standard size
Throttle spindle, oversize
(use tool n° 102.275)
Set of two bushes to repair a worn
out carburettor with standard shafts
DISC 1 3/4”, plain
DISC 1 3/4”, with over-run valve
Screw
Float chamber adaptor, FRONT
Float chamber adaptor, REAR
Special SU-Zenith carburettor oil
Carburettor synchroniser
1 3/4” SU DASHPOT COVERS,
chrome plated
K&N air filter assembly
K&N replacement filter
K&N cleaner
K&N oil spray
Air cleaner assembly (NOT USA)
Air cleaner assembly (USA)
©
Air filter element (NOT USA)
Air filter element (USA)
Rubber sealing ring
Rubber sealing ring (USA)
Air filter nut, square head
Air filter nut, square head (USA)
Washer, fibre
Distance piece
Gasket
Front mounting bracket (NOT USA)
Front mounting bracket (USA)
Rear mounting bracket (NOT USA)
Rear mounting bracket (USA)
Spring
Heatshield, (29G)
Plate, spring ANCHOR
Heatshield, (29GA)
Plate, spring ANCHOR
Reamer for oversize shafts
(no bushes required)
V a n
G e s t e l
B & C
2 0 0 5
Fuel pump & tank
ILL N° PART N°
QTY DESCRIPTION
1 101.052 1
2 101.050 1
3 132.095 1
4 102.079 2
5 102.080 4
6 101.049 1
7 102.098 1
8 101.191 1
9 101.192 1
©
V a n
G e s t e l
Fuel Pump, S.U.
Fuel pump mounting rubber
Fuel pump mounting bracket
Banjo bolt
Washer, fibre
Flexible, Pump to pipe
Union-banjo
“FACET” High Capacity pump
assembly for extra reliability, with
a solonoid pump action.
NEGATIVE EARTH ONLY
PAIR, UNIONS for 1/4” diameter
pipe ends
B & C
2 0 0 5
ILL N° PART N°
10
11
12
13
14
15
16
17
18
19
20
21
QTY DESCRIPTION
101.938 A/R
161.070 A/R
161.068 A/R
161.067 A/R
100.005 1
133.205 1
101.060 1
101.059 1
083.065 1
121.041 2
101.053 1
172.115 2
5 meters fuel pipe
End piece, to be solded on
Nipple, to be solded on
Nut for nipple 161.068.
Fuel tank
Fuel tank bolting kit
Sealing ring
Locking ring
Sender unit
Strip-packing
Seal, tank to floor
Clamps
ILL N° PART N°
QTY DESCRIPTION
22 101.054 1
23 101.055 1
24 101.056 1
25 101.058 1
26 101.057 1
27 062.019 A/R
062.020 A/R
28 172.051 A/R
29 172.174 A/R
Hose
Pipe, filler neck
Ferrule, filler neck
Chrome filler cap with lock
Filler cap
1 Meter fuel resistant hose,
6.3 mm 1.D.
1 Meter fuel resistant hose,
7,9 mm I.D.
Clamp for 062.019
Clamp for 062.020
23
Gearbox standard, part 1
ILL N° PART N°
QTY DESCRIPTION
1 020.039 1
2 016.165 1
3 023.409 1
4 023.410 1
5 016.183 1
24
GEARBOX ASSEMBLY - REBUILD
NOT INCLUDED: CLUTCH FORK, REMOTE CONTROL & GEAR LEVER, PINION SPEEDOMETER & HOUSING, CLUTCH DUST GAITER & DUST PLATE
Gasket
BOLTING KIT, GEARBOX TO ENGINE, DUST PLATE MOUNTING & STARTER MOUNTING
OVERHAUL KIT
THIS KIT INCLUDES THE MOST IMPORTANT PARTS TO REBUILD
YOUR GEARBOX. INCLUDED ARE ALL
GASKETS, OIL SEALS, BEARINGS, NEEDLE CAGES, LAYSHAFT AND SYNCHRO RINGS
GASKET SET, ALL GASKETS NO
OIL SEALS!
ILL N° PART N°
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
QTY DESCRIPTION
020.040 1
023.394 1
081.026 4
164.002 4
023.001 1
023.392 1
023.007 1
016.162 1
167.080 8
164.002 8
161.002 8
023.279 1
016.164 1
164.002 10
162.086 10
020.029 1
023.093 2
016.163 1
Main casing
Stone guard
Screw
Washer, spring
Drain plug
Front cover & fork mounting plate
Front oil seal
Gasket, front cover
Stud
Washer, spring
Nut
Cover, gearbox side
Gasket
Washer, spring
Screw
Extension, rear
Dowel
Gasket
ILL N° PART N°
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
167.079
161.002
162.085
164.002
023.134
162.089
168.023
023.167
023.393
023.115
023.117
161.025
163.005
023.395
186.001
190.060
©
QTY DESCRIPTION
3
3
5
8
1
1
1
1
1
1
1
1
1
1
3
1
V a n
Stud
Nut
Screw
Washer, spring
Button thrust, speedometer pinion
Plug (overdrive switch hole)
Gasket
Pin, location
Clutch lever
Bush
Bolt
Locknut
Washer
Dust cover
1 L. gearbox oil
MGC, original workshop manual
G e s t e l
B & C
2 0 0 5
Gearbox standard, part 2
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
©
QTY DESCRIPTION
023.280 1
023.281 1
023.282 1
023.283 A/R
023.284 A/R
023.285 1
023.286 1
023.287 1
023.288 1
023.289 1
023.290 1
023.291 A/R
023.292 A/R
023.293 A/R
023.294 A/R
023.301 2
023.302 1
023.303 2
023.304 1
023.141 1
023.091 1
023.305 1
023.306 1
V a n
Shaft, 1 st motion
Bearing, ball
Spring ring
Shim, 1 st motion shaft, .051 mm
Shim, 1 st motion shaft, .102 mm
Bearing, needle roller
Lock washer
Nut, 1 st motion shaft
Layshaft
Laygear
Thrust washer, laygear front
Thrust washer, rear, 3.91 to 3.96 mm
Thrust washer, rear, 3.99 to 4.01 mm
Thrust washer, rear, 4.06 to 4.09 mm
Thrust washer, rear, 4.14 to 4.17 mm
Bearing, needle roller, laygear
Tube, distance, bearing
Spring ring
Reverse shaft
Screw
Lock washer
Reverse gear
Bush
G e s t e l
B & C
2 0 0 5
ILL N° PART N°
QT
DESCRIPTION
ILL N° PART N°
20 023.307 1
21 023.050 1
22 023.308 1
23 023.386 1
24 023.310 1
25 023.311 1
26 023.312 1
27 023.313 1
28 023.069 3
29 023.314 3
30 023.315 2
31 023.317 1
Shaft, 3rd motion
Oil restrictor
Gear, reverse, 3rd motion shaft
1 st speed gear assembly
Bush
2nd speed gear assembly
Bush
1st and 2nd speed synchronizer
assembly
Ball
Spring
Synchro ring
Washer, thrust, 2nd speed gear
32 023.318 1
33 023.319 1
34 023.320 1
35 023.310 1
36 023.321 1
37 023.069 3
38 023.314 3
39 023.316 2
Washer, thrust, interlocking
Sleeve, mainshaft
3rd speed gear assembly
Bush
3rd and 4th speed synchronizer assembly
Ball
Spring
Synchro ring
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
QT
023.322 1
023.323 A/R
023.324 A/R
023.325 1
023.326 1
023.327 1
023 328 1
172.005 1
023.331 1
023.332 1
023.333 1
023.057 1
023.334 A/R
023.335 A/R
023.336 A/R
023.337 1
023.338 1
023.339 1
023 340 1
020.029 1
023.342 1
161.299 1
DESCRIPTION
Bearing, 3rd motion shaft front
Shim, .051 mm
Shim, .102 mm
Housing for bearing
Peg locating
Distance piece, 3rd motion shaft
Speedometer gear (10 teeth)
Key, speedometer gear
Lock washer
Nut, 3rd motion shaft, front
Tube, distance (with sleeve)
Bearing, 3rd motion shaft. rear
Shim, rear bearing, 0.002”
Shim, rear bearing, 0.005”
Shim, rear bearing, 0.010”
Circlip, 0.096” /0.098”
Circlip, 0.098” / 0 100”
Circlip, 0.100” / 0.102”
Oil seal, rear
Flange, 3rd motion shaft
Lock washer
Nut
25
Gearbox standard, part 3
ILL N° PART N°
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
020.030
023.405
016.165
162.469
162.096
164.002
023.017
023.355
023.354
172.014
023.397
164.002
023.356
023.106
023.253
168.013
023.361
023.102
023.167
083.052
168.023
023.364
023.021
023.365
161.304
26
QTY DISCRIPTION
1
2
1
4
2
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Housing, remote control
Bush
Gasket (included in gasket set)
Bolt, long
Bolt, short
Washer, spring
Breather assembly
Shaft, remote control
Lever, remote control
Key, lever to shaft
Bolt
Washer, spring
Plunger
Spring
Cap
Washer
Plunger, reverse selector
Spring
Pin
Switch, reverse light
Gasket
Lever, gear change
Bush, nylon
Knob, gear change
Nut lock, chrome plated
ILL N° PART N°
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
023.150
161.002
023.356
023.106
023.253
168.013
023.372
162.471
164.030
023.378
023.406
023.407
023.408
023.128
023.137
023.064
162.077
164.012
172.234
172.019
163.007
164.015
161.024
023.343
023.344
QTY DISCRIPTION
2
2
1
1
1
1
1
3
3
1
1
2
1
1
1
1
2
2
1
1
1
1
1
1
1
Pin, locating
Washer, spring
Damper
Spring
Cap
Washer
Cover gear lever
Special screw
Double spring washer
Dipstick assembly
Bobbin
‘0’ ring
Pinion, speedometer
Gasket
Bush, pinion
Oil seal
Screw
Washer, spring
Bracket for wiring clip
Wiring clip
Washer, plain
Washer, spring
Nut
Fork, reverse
Fork, 1 st and 2nd
ILL N° PART N°
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
023.345
023.346
023.347
023.348
023.349
023.350
023.351
162.087
164.007
161.034
023.035
023.352
023.353
023.396
161.300
023.398
023.358
023.359
023.360
168.095
023.027
023.399
168.001
023.400
©
QTY DISCRIPTION
1
1
1
1
1
1
1
3
3
3
3
1
1
1
1
1
3
3
3
3
1
1
1
1
V a n
Fork, 3rd and 4th
Rod, reverse
Rod, 1 st and 2nd
Rod, 3rd and 4th
Selector, reverse
Selector, 1 st and 2nd
Selector, 3rd and 4th
Screw, fork locating
Washer, shakeproof
Lock nut
Screw, selector locating
Lever, selector
Shaft, selector lever
Screw, selector locating
Lock nut
Arm & bracket, interlocking
Plunger, fork rod
Spring, detent plunger
Plug, plunger
Washer, plug
Ball, reverse plunger
Spring, reverse detent
Washer, detent plug
Plug, reverse detent
G e s t e l
B & C
2 0 0 5
Gearbox overdrive, part 1
ILL N° PART N°
QTY DESCRIPTION
1 020.042 1
2 020.043 1
3 016.165 1
4 023.409 1
5 023.411 1
6 016.184 1
7 023.040 1
8 167.080 8
9 167.079 3
10 023.001 1
11 023.392 1
12 023.007 1
©
V a n
G e s t e l
GEARBOX & OVERDRIVE
ASSEMBLY - REBUILD
Not included: clutch fork, remote control & gear lever, pinion speedometer & housing, clutch dust
gaiter & dust plate
GEARBOX FOR OVERDRIVE - REBUILD
Not included: clutch fork, remote control & gear lever, pinion
speedometer & housing, clutch dust
gaiter & dust plate
Gasket
Bolting kit, gearbox to engine, dust
plate mounting & starter mounting
OVERHAUL KIT
This kit includes the most important
parts to rebuild your gearbox.
Included are: all gaskets, oil seals,
bearings, needle cages, layshaft and synchro rings
Gasket set, all gaskets, NO oil seals!
Main casing
Stud, front cover
Stud, overdrive adaptor
Plug, drain
Front cover
Oil seal
B & C
2 0 0 5
ILL N° PART N°
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
QTY DESCRIPTION
016.162 1
164.002 8
161.002 8
023.279 1
016.164 1
164.002 10
162.086 10
020.038 1
023.093 1
016.166 1
161.002 3
164.002 3
162.085 5
164.002 5
020.030 1
023.405 2
016.165 1
162.469 4
162.096 2
164.002 6
023.093 2
023.394 1
164.002 4
081.026 4
023.364 1
023.365 1
161.304 1
Gasket
Washer, spring
Nut
Side cover
Gasket
Washer, spring
Screw
Adaptor overdrive
Dowel
Gasket
Nut
Washer, spring
Screw
Washer, spring
Remote control housing
Bush
Gasket
Screw
Screw
Washer, spring
Dowel, remote control housing
Guard, stone clutch housing
Washer spring
Screw
Lever, change speed
Lever knob
Lock nut
ILL N° PART N°
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
023.021
023.150
164.002
023.356
023.106
023.253
168.013
023.372
162.471
164.030
083.052
168.023
023.165
023.391
023.167
023.393
023.115
023.117
163.005
161.025
023.395
023.378
023.406
023.407
186.001
190.060
QTY DESCRIPTION
1
2
2
1
1
1
1
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
Bush, lever
Pin, lever locating
Washer spring
Plunger, lever damping
Plunger, spring
Plunger, retaining cap
Washer, cap
Lever seat cover
Cover screw
Washer, spring, double coil
Switch, reverse light or overdrive
Washer, switch
Spring, plunger
Isolation switch, plunger
Pin, plunger locating
Lever, clutch withdrawal
Bush
Lever, bolt
Washer, bolt
Nut
Dust lever, cover
Indicator assembly, oil level
Bobbin
Packing ring
1 L. gearbox oil (capacity 3.4 L)
MGC original workshop manual
27
Gearbox overdrive, part 2
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
QTY DESCRIPTION
024.910 1
023.281 1
023.282 1
023.283 A/R 023.284 A/R 023.285 1
023.286 1
023.287 1
023.288 1
023.403 1
023.290 1
023.291 A/R 023.292 A/R 023.293 A/R 023.294 A/R 023.301 2
023.302 1
023.303 2
28
Shaft, 1 st motion
Bearing
Spring ring
Shim, 0.002”
Shim, 0.004”
Bearing, needle roller
Lock washer
Nut
Layshaft
Laygear
Thrust washer, front
Thrust washer, rear, 3.91 to 3.96 mm
Thrust washer, rear, 3.99 to 4.01 mm
Thrust washer, rear, 4.06 to 4.09 mm
Thrust washer, rear, 4.14 to 4.17 mm
Bearing, needle roller
Tube, distance, bearing
Spring ring
ILL N° PART N°
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
023.304
023.141
023.091
023.305
023.306
023.379
023.050
023.308
023.386
023.310
023.404
023.312
023.313
023.069
023.314
023.315
023.317
023.318
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
3
3
2
1
1
Reverse shaft
Screw, shaft locking
Lock washer
Reverse gear
Bush
Shaft, 3rd motion
Oil restrictor
Gear, reverse, mainshaft
Gear, 1 st speed, mainshaft
Bush
Gear, 2nd speed, mainshaft
Bush
1 st and 2nd speed synchronizer
Ball
Spring
Ring, baulk, 1 st and 2nd speed
Washer, thrust, 2nd speed gear
Washer, thrust, interlocking
ILL N° PART N°
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
QTY DESCRIPTION
023.319 1
023.401 1
023.310 1
023.321 1
023.069 3
023.314 3
023.316 2
023.402 1
023.334 A/R 023.335 A/R 023.336 A/R 023.387 1
023.388 1
023.390 1
023.389 1
023.331 1
023.332 1
©
V a n
Sleeve, mainshaft
Gear, 3rd speed
Bush
3rd and 4th speed synchronizer
Ball
Spring
Ring, baulks, 3rd and 4th speed
Bearing, 3rd motion shaft
Shim, 0.002”
Shim, 0.005”
Shim, 0.010”
Housing for bearing
Distance piece, 3rd motion shaft
Nut
Lock washer
Lock washer, front
Nut, 3rd motion shaft, front
G e s t e l
B & C
2 0 0 5
Propellor shaft
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
©
023.343
023.344
023.345
023.346
023.347
023.348
023.349
023.350
023.351
162.087
164.007
161.034
023.035
023.352
023.353
023.396
161.300
023.354
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
3
3
3
3
1
1
1
1
1
G e s t e l
Fork. reverse
Fork, 1 st and 2nd
Fork, 3rd and 4th
Rod, reverse
Rod, 1 st and 2nd
Rod, 3rd and 4th
Selector, reverse
Selector, 1 st and 2nd
Selector, 3rd and 4th
Screw, fork locating
Washer, shakepoof
Lock nut
Screw, selector locating
Lever, selector
Shaft, selector lever
Screw, selector lever locating
Lock nut
Lever, remote control shaft
B & C
2 0 0 5
ILL N° PART N°
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
172.014
023.397
164.002
023.355
023.356
023.106
023.253
168.013
023.398
023.358
023.359
023.360
168.095
023.361
023.102
023.167
023.027
023.399
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
3
3
3
3
1
1
1
1
1
Key
Bolt
Spring washer
Shaft, remote control
Plunger, shaft damping
Spring, plunger
Cap, retaining plunger
Cap washer
Arm, interlocking
Plunger, fork rod
Spring, detent plunger
Plug, plunger
Washer, plug
Plunger, reverse selector
Spring, plunger
Pin locating plunger
Ball
Spring, detent plunger
ILL N° PART N°
QTY DESCRIPTION
37 023.400 1
38 168.001 1
39 134.147 1
40 134.148 1
41 032.207 2
42 032.193 2
43 032.046 2
44 032.208 1
45 032.209 1
46 032.210 1
47 162.463 4/8 48 162.470 4
49 161.025 8
50 174.028 2
51 023.021 1
52 023.412 1
Plug, detent spring
Washer, plug
Propeller shaft, reproduction
Propeller shaft, original with rubber dust cap fitted
Flange, yoke
Universal joint with greaser
Grease
Sleeve yoke
Sealing ring & dust cap
Rubber boot, will only fit original
propeller shaft
BOLT (USE 4 PIECES ONLY WHEN
OVERDRIVE IS FITTED)
BOLT, AT OVERDRIVE
SELF LOCKING NUTS
LOCKING PLATE AT OVERDRIVE
Nylon bush, gear lever
Nylon bush
29
Overdrive
30
©
V a n
G e s t e l
B & C
2 0 0 5
Overdrive
ILL N° PART N°
QTY DESCRIPTION
1 020.041 1
2 025.142 1
3 025.106 1
4 025.107 1
5 025.108 1
6 025.086 1
7 025.087 1
8 025.088 1
9 025.139 1
10 016.215 1
11 025.089 1
12 025.109 1
13 025.110 1
14 164.016 6
15 162.475 6
16 025.112 1
17 025.111 1
18 025.113 1
19 025.114 1
20 025.069 1
21 025.115 1
22 025.035 12
23 025.034 1
24 025.036 1
25 025.067 1
26 025.068 1
27 025.116 1
28 025.117 1
29 025.118 1
30 025.124 1
31 025.125 1
32 025.126 1
33 025.140 1
34 024.141 1
35 161.303 1
36 162.470 4
37 161.025 4
38 025.129 1
39 016.050 1
40 025.087 1
41 025.130 1
42 164.029 1
43 162.029 1
©
V a n
G e s t e l
Overdrive unit assembly
Filter, ‘0’ ring and oil seal KIT.
Most problems start with a dirty filter or old and stiff ‘0’ rings.
Before starting a complete overhaul, you can save yourself a lot of work
and costs by first changing these.
Solenoid valve kit
Coil solenoid
Grommet
‘0’ ring
‘0’ ring
‘0’ ring
plate end
Gasket
Filter and gasket, sump
Magnet set
Sump
Washer, shakeproof
Screw, sump
Rear casing
Annulus
Bearing, planet
Carrier, planet
Thrust washer, free wheel inner to annulus
Inner member, free wheel
Roller, steel
Cage, free wheel
Spring, cage
Ring, case spring
Oil thrower
Spring ring, mainshaft
Spacer
Spacer, selective
Bearing 11/4” x2 3/4” xl 1/16”
Bearing 30 x 62 x 16 mm
Oil seal, rear casing
Flange, coupling
Washer
Nut
Special bolt, ‘D’ head
Self locking nut
Bearing, speedometer
Oil seal
‘0’ ring
Lock plate, speedometer
Lock washer, speedometer
Screw
B & C
2 0 0 5
ILL N° PART N°
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
QTY DESCRIPTION
025.131 1
025.132 1
025.103 16
164.012 16
025.073 1
167.030 8
167.081 6
167.082 2
025.074 1
016.167 1
016.216 1
025.075 1
025.076 4
025.077 1
025.078 1
025.079 1
172.230 1
025.080 1
172.231 1
023.380 1
023.381 1
172.229 1
025.137 1
025.081 1
025.082 1
025.090 1
025.091 1
025.092 1
025.093 1
025.083 1
025.094 1
025.136 1
025.084 1
025.096 1
025.085 1
168.097 1
025.097 1
025.098 4
025.099 4
025.138 4
025.101 4
172.232 4
025.102 2
174.016 4
025.103 4
025.104 1
025.105 1
Pinion, speedometer
Gear, speedometer
Nut
Washer, spring
Main casing
Stud, main casing to adaptor
Stud, main casing to rear casing
Stud, main casing to rear casing
Ring, brake
Gasket, adaptor to main casing
Gasket, overdrive to adaptor
Housing, thrust bearing
Pin, housing
Bearing, thrust
Plate, bearing retainer
Sliding member
Circlip
Sunwheel
Ring snap
Cam
Key
Circlip
Dowel, spring, oil transfer pump
Body pump
‘0’ ring, body
Plunger, pump
Spring, pump plunger
Valve, non return-pump
Plug, pump
‘0’ ring, plug
Tube, suction pump
Valve, relief and low pressure
‘0’ ring
Filter, relief valve body
‘0’ ring
Washer, relief valve plug
Plug, relief valve
Washer, thrust rod
Rod, thrust
Spring, clutch engagement
Spring, clutch release
Circlip, thrust rod
Bridge piece
Washer, tab
Nut
Piston
‘0’ ring
31
Automatic transmission
Part nr.
300.137
ATF oil
ILL N° PART N°
QTY DESCRIPTION
1 016.217 1
2 016.218 1
3 016.219 1
4 016.220 1
5 016.221 1
32
Gasket set
Oil pan gasket
Gasket, pump adaptor to convertor
support
Gasket, extension to case
Oil seal, front pump
ILL N° PART N°
6
7
8
9
10
016.012
011.163
011.164
011.165
174.007
011.166
QTY DESCRIPTION
1
1
1
1
1
1
Oil seal, rear
Crankshaft bush
plate crankshaft back, thin
Plate support, thick
LOCK PLATE
Starter ring
ILL N° PART N°
11
12
13
14
15
16
174.029
020.047
083.430
101.159
134.149
020.046
©
QTY DESCRIPTION
4
1
2
1
1
1
V a n
LOCK PLATE
Convertor
Switch inhibitor or reverse lights
Cable, KICKDOWN
Cable, selector control
Automatic transmission assembly
G e s t e l
B & C
2 0 0 5
Front suspension, part 1
See page 89 for
Superflex bushes
ILL N° PART N°
QTY DESCRIPTION
1 042.305 2
2 042.306 2
3 162.048 4
4 161.025 4
5 164.006 4
6 042.307 2
042.308 2
042.309 2
7 041.293 2
041.507 2
13 041.294 2
14 041.295 2
15 041.296 2
16 041.297 2
17 041.298 2
048.166 2
18 041.299 4
©
V a n
G e s t e l
Front, lower arm
Rear, lower arm
Bolt
Nut, nylon locking
Washer, spring
Standard shock absorber, front
“SPAX” front shock absorber
“KONI” adjustable shock absorber
Shock absorber bottom rubber
Superflex polyurethane
bottom rubber
Shock absorber bottom pin
Collar, split
Distance piece
Swivel pin, bottom
Swivel pin bush, outer fulcrum
Superflex polyurethane Swivel pin bush, outer fulcrum
Washer, king pin spacer
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
19 161.277 4
20 164.011 4
21 041.300 4
22 041.301 2
048.164 2
23 161.277 2
24 164.011 2
25 042.310 2
26 042.311 2
27 042.312 2
28 041.302 4
29 041.303 A/R 041.304 A/R 30 041.305 4
048.161 4
31 163 …
4
32 163 …
4
33 164.011 4
Nut, 1/2”
Spring washer, 1/2”
Fulcrum pin, inner
Bush, torsion
Superflex polyurethane bush, torsion
Nut
Spring washer
Front top arm
Rear top arm
Pivot bracket
Shim pivot bracket, 2.59 mm
Shim pivot bracket, 1.62 mm
Shim pivot bracket, 0.9 mm
Bush, top arms, wishbone
Superflex polyurethane bush,
top arms, wishbone
Washer, inner
Washer, outer
Washer, spring
ILL N° PART N°
QTY DESCRIPTION
34 041.032 4
35 167.066 4
36 174.026 4
37 162.081 4
38 161 …
4
39 164 …
4
40 041.057 2
41 041.056 2
041.511 2
42 161.043 2
43 041.306 2
44 162.005 4
45 164.002 4
46 041.325 2
048.162 2
47 041.922 4
Castle nut, 1/2” UNF
Stud, pivot bracket
Lock plate
Bolt
Nut
Washer, spring
Pi n top
Bush top trunion
Superflex polyurethane bush,
top trunion
Nut
Bump, rubber
Screw, 5/16” UNF
Washer, spring
Tie rod bush, front
Superflex polyurethane tie rod bush,
front
Superflex polyurethane bush, damper pin
33
Front suspension, part 2
See page 89 for
Superflex bushes
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
042.313
041.573
041.308
041.309
162.081
161.012
163.001
164.002
041.310
041.311
162.069
164.006
161.026
162.428
34
QTY DESCRIPTION
2
1
1
2
2
2
2
2
2
2
4
4
4
2
Torsion bar
RH lever, vernier
LH lever, vernier
Retaining plate
Bolt
Nut, self locking
Washer, plain
Washer, spring
Block, adjustment
Plate, reinforcement
Bolt
Washer, spring
Nut
Bolt, vernier
ILL N° PART N°
QTY DESCRIPTION
15 161.279 2
16 042.314 2
17 162.276 2
18 161.032 2
19 164.021 2
20 041.312 4
048.163 4
21 041.313 2
22 041.314 2
23 041.032 2
24 042.315 1
25 041.062 2
26 042.316 2
1/2” UNF FLAT NUT
Tie-bar
Bolt
Nut
Washer, spring
Bush, tie-bar, rear
Superflex polyurethane bush,
tie-bar, rear
Retaining bush
Nut and washer, tie-bar
Castle nut
Bar assembly anti-roll
Bush, anti-roll bar
LINK, anti-roll bar
ILL N° PART N°
QTY DESCRIPTION
27 161.032 2
28 164.021 2
29 162.104 2
30 161.044 2
31 164.021 2
32 041.315 2
048.165 2
33 041.316 2
34 162.005 4
35 164.002 4
36 041.317 2
37 041.318 2
38 162.140 4
39 164.015 4
©
V a n
Nut
Washer, spring
Bolt, link to anti-roll
Nut
Washer, spring
Bush, anti-roll bar
Superflex polyurethane bush,
anti-roll bar
Strap for bush
Screw, 5/16” UNF x 3/4”
Washer, spring
Upper locator
Lower locator
Screw
Washer, spring
G e s t e l
B & C
2 0 0 5
Front suspension, part 3
ILL N° PART N°
QTY DESCRIPTION
1 042.299 1
2 042.300 1
3 041.282 2
4 041.283 2
5 042.301 1
7 041.284 4
10 041.285 2
11 041.286 2
12 041.287 2
13 041.066 2
14 041.068 2
©
V a n
G e s t e l
RH axle assembly
LH axle assembly
Bush top (included in king pin kit)
Bush bottom
(included in king pin kit)
KING PIN KIT, for 2 sides
Ring sealing
Top tube, dust excluder
Spring, dust excluder
Bottom tube, dust excluder
Lubricator, top
Lubricator, bottom
B & C
2 0 0 5
ILL N° PART N°
15
16
17
18
19
20
21
22
23
24
25
26
QTY DESCRIPTION
041.288 1
041.289 1
041.290 2
174.025 2
042.302 1
042.303 1
162.106 4
042.304 2
167.033 10
161.046 10
042.124 1
042.125 1
RH top trunion
LH top trunion
Pad reactor, (king pin top nut)
Plate locking, pad reactor
RH steering lever
LH steering lever
Bolt
Hub for disc wheels
Stud for disc wheels
Nut for disc wheels
RH wire wheel hub
LH wire wheel hub
ILL N° PART N°
27
28
29
30
31
33
34
35
36
041.074
041.075
041.076
041.291
041.078
041.079
041.080
041.081
041.292
041.093
041.017
041.082
QTY DESCRIPTION
2
2
2
2
A/R A/R A/R A/R 2
2
2
2
Collar for oil seal
Oil seal
Oil seal and bearing kit
Spacer for bearing
Shim .076 mm
Shim. 1 26 mm
Shim .254 mm
Shim.7 64 mm
Washer, retaining
Nut, captive
Cap, disc wheels
Cap, wire wheels
35
Clutch & hydraulics
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
027.086
027.087
027.088
027.001
027.089
171.003
172.045
163.001
053.069
052.159
052.160
052.161
052.162
052.163
052.164
052.165
052.166
052.072
36
QTY DESCRIPTION
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Clutch pedal
Clutch pedal, USA
Bush
Pedal rubber
Tube, distance
Spring, pedal
Clevis pin
Washer, plain
Clutch master cylinder
Plunger
Valve spacer
Retainer, spring
Push rod
Filler cap
Stem
Spring
Washer
Repair kit
ILL N° PART N°
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
163.001
164.002
161.002
162.088
164.002
161.001
133.510
027.064
052.167
052.168
052.169
052.078
027.090
027.091
172.089
163.001
162.103
164.006
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
Washer, plain
Washer, spring
Nut
Bolt
Washer, spring
Nut
Spacer
Slave cylinder assembly
Piston
Spring
Piston retainer
Bleed screw
Repair kit, slave cylinder
Push rod
Clevis pin
Washer, plain
Bolt, UNC
Washer, spring
ILL N° PART N°
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
QTY DESCRIPTION
054.124 1
054.125 1
052.171 1
052.015 1
168.014 1
168.010 1
172.042 1
163.008 1
133.511 1
027.092 1
168.014 1
161.009 1
172.074 1
164.025 1
052.117 1
053.018 A/R 053.039 A/R ©
V a n
LHD, clutch pipe (132 cm)
RHD, clutch pipe (69 cm)
Banjo
Banjo bolt
Washer, gasket
Washer, gasket
(RHD only) clip, pipe to body
Washer, plain
Bracket, clutch hose
Clutch hose
Washer, gasket
Lock nut
Plate, locking
Lock washer
Rubber grease
1 L. Silicone brake fluid
1 L. Dot 4 brake fluid
G e s t e l
B & C
2 0 0 5
Brake pedals
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
©
027.094
027.095
027.096
027.097
027.098
027.099
027.088
027.001
027.100
027.089
027.101
162.461
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
2
1
1
1
1
G e s t e l
LHD and RHD, BRAKE PEDAL
RHD AUTOMATIC, BRAKE PEDAL
LHD AUTOMATIC, BRAKE PEDAL
USA, BRAKE PEDAL
USA, RHD AUTOMATIC, BRAKE PEDAL
USA, LHD AUTOMATIC, BRAKE PEDAL
Pedal bush
Pedal rubber, brake or clutch
Pedal rubber, automatic
Distance tube
Distance tube, automatic
Bolt, pedal fixing
B & C
2 0 0 5
ILL N° PART N°
13
14
15
16
17
18
19
20
21
22
164.011
161.045
027.102
172.045
163.001
171.003
133.519
133.520
133.521
162.077
161.019
163.010
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
2
1
2
Washer, spring
Nut
Distance piece, pedal fulcrum
PIN, CLEVIS
Washer, plain
Spring
Pedal box
Pedal box, BENELUX & FRANCE only
Pedal box, USA
SCREW, box to dash
Nut
Washer, plain
ILL N° PART N°
23
24
25
26
27
28
29
30
31
32
33
164.012
162.077
163.011
164.012
133.522
133.523
162.139
163.007
164.015
121.194
121.195
QTY DESCRIPTION
2
1
1
1
1
1
4
4
4
1
1
Washer, spring
Screw, box to platform
Washer, plain
Washer, spring
Cover, master cylinder box
COVER, USA, WITH SWITCH ADAPTOR
Screw
Washer, plain
Washer, spring
Seal, box to body
Seal, cover to box
37
Master brake pump - single
ILL N° PART N°
QTY DESCRIPTION
1 053.070 1
2 052.161 1
3 052.177 1
4 052.165 1
5 052.164 1
6 052.175 1
7 052.176 1
8 052.160 1
9 052.178 1
10 052.174 1
11 053.071 1
38
Master brake pump, UK
Retainer, spring
Plugner
Spring
Stem, valve
Filler cap
Gasket only
Spacer, valve
Push-rod
Repair kit
Master brake pump,
BENELUX & FRANCE
ILL N° PART N°
12
13
14
15
16
17
18
19
20
21
22
23
133.524
167 …
163.001
164.002
161.002
162.088
164.002
161.002
133.510
053.072
052.179
052.180
QTY DESCRIPTION
1
2
1
1
1
1
1
1
1
1
1
1
Block, reinforcing
Stud (not fitted when automatic)
Washer, plain
Washer, spring
Nut
Screw, master cylinder to box
Washer, spring
Nut
Spacer, master cylinder to box
plastic tank, brake fluid
Filler cap & gasket (incl. n° 23+24)
Baffle, fluid
ILL N° PART N°
24
25
26
27
28
29
30
31
32
33
34
052.181
133.525
162.060
163.007
164.015
162.139
164.017
052.182
052.183
172.049
052.117
©
QTY DESCRIPTION
1
1
2
2
2
1
1
1
1
2
1
V a n
Gasket, filler cap
Bracket, tank to bulkhead
Screw
Washer, plain
Washer, spring
Screw, bracket clamping
Double spring washer
Hose, tank to pipe
Pipe, hose to pump
Clamp, hose securing
Rubber grease
G e s t e l
B & C
2 0 0 5
Master brake pump - double
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
©
053.073
052.186
052.187
052.188
052.189
052.190
052.191
052.192
052.193
172.220
052.194
052.195
162 …
164 …
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
2
2
G e s t e l
Master brake cylinder, USA
Stem, valve
Spacer, valve
Spring, return, secondary plunger
Retainer, spring
Plunger, secondary
Spring, return, primary plunger
Plunger, primary
Push-rod
Circlip, retaining, push-rod
Retainer, tipping valve
Cover and adaptor, inlet
Screw, cover to body
Washer, spring
B & C
2 0 0 5
ILL N° PART N°
15
16
17
18
19
20
21
22
23
24
25
26
27
28
052.196
172.221
052.185
162.072
164.006
053.074
052.179
052.180
052.181
133.525
162.060
163.007
164.015
162.139
QTY DESCRIPTION
2
2
1
2
2
1
1
1
1
1
2
2
2
1
Nut, retaining
Circlip, retaining
Kit, repair
Screw
Washer, spring
Tank assembly, brake fluid (plastic)
Cap, filler assembly
Baffle, fluid
Gasket, filler cap
Bracket, tank
Screw
Washer, plain
Washer, spring
Screw
ILL N° PART N°
QTY DESCRIPTION
29 164.017 1
30 052.182 2
31 052.183 1
052.184 1
32 172.049 4
33 053.075 1
34 053.076 1
35 052.197 1
36 052.198 1
37 052.199 1
38 052.117 1
39 053.018 A/R 40 053.039 A/R Washer, spring
Hose, tank to pump
Pipe, hose to master cylinder (18 cm)
Pipe, hose to master cylinder (8 cm)
Clip, hose securing
Master brake cylinder,
NORTH AMERICA
Reservoir
Filler cap & seal
Seal, filler cap
Baffle, filler cap
Rubber grease
1 L silicone brake fluid
1 L DOT 4 brake fluid
39
Girling servo’s
ILL N° PART N°
QTY DESCRIPTION
1 053.077 1
2 052.202 1
3 052.203 1
4 052.204 1
5 052.205 1
6 052.206 1
7 052.207 1
8 052.208 1
9 053.078 1
10 052.209 1
11 052.210 1
12 052.211 1
13 052.212 1
052.213 1
40
SERVO ASSEMBLY
(Oct. ‘67 till March ‘68)
Piston, valve operating
Abutment, piston spring
Spring, piston return
Retainer, spring
Circlip, retainer
Spring, piston return
Spring, piston
PISTON and ROD Assembly
Bush, piston rod guide
Spring, cylinder return
Spring, control valve return
AIR FILTER KIT, (incl. n° 14, 15)
Air filter, element only
ILL N° PART N°
14
15
16
17
18
19
20
21
22
23
24
25
26
QTY DESCRIPTION
052.214 1
052.215 1
023.277 1
053.079 1
052.216 1
052.217 1
052.200 1
168.094 1
053.080 1
132.333 1
132.334 1
121. 196 1
162.005 A/R 162.077 A/R Seal, air filter to body
Air filter cover
Ban
REPAIR KIT SERVO
Air valve repair kit
Varve, non return (ear(y typeJ
Bolt for valve
Gasket, valve
SERVO ASSEMBLY (March ‘68 - on)
LHD, SERVO SUPPORT BRACKET
RHD, SERVO SUPPORT BRACKET
Seal, under servo bracket
Screw 5/16” UNF x 3/4”
Screw 1/4” UNF x 3/4”
ILL N° PART N°
27
28
29
30
31
32
33
34
35
36
37
QTY DESCRIPTION
161.002
161.019
163.001
163.010
164.002
164.012
162.056
164.006
052.201
053.081
052.218
052.219
052.220
052.221
A/R A/R A/R A/R A/R A/R 3
3
1
1
1
1
1
1
©
V a n
NUT 5/16” UNF
NUT 1/4” UNF
WASHER PLAIN, 5/16”
WASHER PLAIN, 1/4”
WASHER SPRING, 5/16”
WASHER SPRING, 1/4”
SCREW 3/8” UNF x 3/4”
WASHER SPRING
Valve, non return
Servo repair kit
Sleeve, rubber
Adaptor
Grommet for adaptor
Band, crimping
G e s t e l
B & C
2 0 0 5
Lockheed servo systems
ILL N° PART N°
QTY DESCRIPTION
1 053.082 A/R
2 052.222 1
3 052.223 1
4 162 …
3
5 052.224 1
6 052.225 1
7 052.226 1
©
V a n
G e s t e l
LOCKHEED SERVO ASSEMBLY
NOT ORIGINAL BUT THE PERFECT
ALTERNATIVE FOR REPLACING THE GIRLING SERVO. PLEASE ALSO USE OUR SPECIAL CONVERSION
BRACKETS (See below)
Piston, valve air
Housing, lower, air control valve
Screw, housing to body
Support, diaphragm
Diaphragm, air control valve
Cover, air control valve
B & C
2 0 0 5
ILL N° PART N°
8
9
10
11
12
13
14
15
16
17
18
19
162 …
052.227
052.228
052.229
052.230
162 …
052.231
053.083
052.232
052.233
052.234
053.084
QTY DESCRIPTION
5
1
1
1
1
3
1
1
1
1
1
1
Screw, cover to housing
Push-rod
Spacer
Bearing
Plate, abutment
Screw, shell to body
Spring, vacuum piston return
Piston, vacuum
Key, piston to push-rod
Pipe, valve cover to end cover
Valve, non return
SERVO REPAIR KIT
ILL N° PART N°
QTY DESCRIPTION
20 132.335 1
21 054.105 1
22 052.235 1
23 172.151 A/R 172.152 A/R 172.153 A/R 172.154 A/R 172.155 A/R 172.156 A/R
Conversion bracket to fit a lockheed on a girling installation
1 meter servo vacuum hose,
1/4” I.D.
‘Y’ piece, vacuum hose
Hose clips, 3/4” x 3/16”
Hose clips, 3/4” x 1/4”
Hose clips, 3/4” x 5/16”
Hose clips, 7/8” x 3/16”
Hose clips, 7/8” x 1/4”
Hose clips, 7/8” x 5/16”
41
Brake pipes and hoses
42
©
V a n
G e s t e l
B & C
2 0 0 5
Brake pipes and hoses
Part nr.
200.813
Flaring tool
This professional flaring tool is
of a very high quality and
is suitable for both
3/16” and 1/4”
pipes. Made
in England
Part nr.
054.401
5 meters copper/nickel
brake pipe, 3/16”
Part nr.
052.405
Female union
3/8” UNF for 3/16” pipe
Part nr.
052.406
Male union
3/8” UNF for 3/16” pipe
Part nr.
Part nr.
052.242
200.737
In-line connector, male
3/8” x 3/8” UNF
Bending tool
The best tool for bending
your brake pipe set etc.
Part nr.
052.243
In-line connector,
female
3/8” x 3/8” UNF
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
©
054.127
054.128
054.129
054.130
054.077
168.014
172.074
164.025
161.009
052.236
052.237
168.014
083.412
084.004
163.035
083.313
161.009
053.085
053.086
V a n
QTY DESCRIPTION
1
1
1
2
1
1
5
5
5
1
1
1
1
1
1
1
1
1
1
G e s t e l
LHD, SINGLE SYSTEM BRAKE PIPE SET
LHD, DOUBLE SYSTEM BRAKE PIPE SET
RHD, SINGLE SYSTEM BRAKE PIPE SET
FRONT BRAKE HOSE
REAR BRAKE HOSE
GASKET rear brake hose
LOCKING plate
Star washer
LOCK NUT
Connector 5 way (early) G-CN1-101 to 1968
Connector 5 way G-CN1-1969-on
Gasket, fitted on early type only!
STOP SWITCH (early), to be used with gasket
STOP SWITCH WITH CONE THREAD
Spacer
Switch stop light, fitted on pedal box cover
LOCKING NUT
Pressure failure switch (to G-CNl-5962)
Pressure failure switch (from G-CNl-5963)
B & C
2 0 0 5
ILL N° PART N°
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
052.238
052.239
083.413
023.277
052.240
133.529
133.530
172.071
052.241
164.033
161.298
052.242
164.025
161.009
172.073
172.063
172.042
172.072
172.222
172.223
172.224
QTY DESCRIPTION
1
1
1
1
1
1
1
3
1
1
1
1
1
1
A/R A/R A/R A/R 3
2
1
Repair kit, pressure failure switch (to G-CN1-5962)
Repair kit, pressure failure switch (from G-CN1-5963)
WARNING SWITCH
BALL, SWITCH OPERATING
Connection 3 way (rear axle)
Bracket
Bracket, pipe protection
Strap, brake pipe to rear axle
Union connection - large, 7/16”
Washer lock
LOCKING NUT
Union connection - small, 3/8”
Washer lock
Locking nut
Clip, single pipe 3/16” - 3/16” screw
Clip, single pipe 3/16” - 1 /4” screw
Clip, single pipe 3/16” - 5/16” screw
Clip, dual pipe 3/16” - 3/16” screw
Clip, brake pipe to clutch hose bracket
Clip, pipe to LH front hose
Clip, pipe to RH front valance
43
Rear brakes - hand brake
44
©
V a n
G e s t e l
B & C
2 0 0 5
Rear brakes - hand brake
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
©
053.087
052.084
052.085
052.251
052.247
052.248
052.252
052.253
052.254
052.258
052.255
052.256
052.257
053.089
053.088
050.061
162.058
052.029
052.249
052.250
052.246
052.028
052.245
052.244
052.117
050.059
050.060
162.122
161.078
134.063
134.064
054.132
054.133
054.134
054.135
054.039
054.057
054.053
054.054
V a n
QTY DESCRIPTION
2
2
2
2
1
1
2
2
2
1
4
4
4
1
1
2
4
2
1
1
2
2
2
1
1
1
1
8
8
1
1
1
1
1
1
2
1
1
1
G e s t e l
Wheel cylinder assembly
Plate, wheel cylinder retaining
Spring plate retaining
Dirt excluder
RH adjuster
LH adjuster
Brake shoe return spring, abutment end
Brake shoe return spring, cylinder end
Plate, brake shoe support
KIT, BRAKE SHOE FIXING (INCL. 4 x 052.255/6/7)
Washer, cup
Spring
Pin, shoe steady
Brake shoe lining kit (4 pieces), incl. rivets
Brake shoe assembly set (4 pieces)
Brake drum
Screw
Plug
RH lever, operating
LH lever, operating
Retaining clip, dust cap
Screw, bleed
Dust cap, bleed screw
Repair kit for 2 wheel cylinders
Rubber grease
RH base plate
LH base plate
Bolt
Locking nuts
Handbrake cable (when disc wheels are fitted)
Handbrake cable (when wire wheels are fitted)
Handbrake cable adjusting kit
Lever assembly
Fastener kit, cable to battery box
Fastener, cable to 3 way connector
Clevis pin
Complete handbrake handle
KNOB
Rod
B & C
2 0 0 5
ILL N° PART N°
34
35
36
37
38
39
40
41
42
43
44
45
46
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
054.055
054.056
054.058
054.059
163.011
054.060
054.061
162.136
054.062
163.005
161.025
054.051
054.052
163.010
164.012
161.019
133 …
161.024
163.010
054.038
163.011
054.036
054.037
054.040
162.047
164.015
161.024
054.029
054.030
054.031
054.028
163.008
161.021
163.009
164.014
161.010
162.029
164.012
161.019
QTY DESCRIPTION
1
1
1
1
1
2
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
Spring
Grip, handle
Handle
PAWL
Washer
Washer on spindle
Plate, ratchet
Screw, handbrake handle to tunnel
Lever, operation
Washer
Self locking nut
GROMMET cable protection
Cable clamp, to battery box
Washer, plain
Washer, spring
Nut
Bracket, cable to tunnel shaft
Nut
Washer, plain
Spring
Washer, plain
T runion cable
Nut, cable adjusting
Clamp, cable to 3 way
Screw
Washer, spring
Nut
Lever, inner
Lever, outer
Bush
Fulcrum, bolt
Washer, plain
Nut, self locking
Washer, plain
Washer, anti-rattle
Nut
Screw
Washer, spring
Nut
45
Brake calliper and brake disc
ILL N° PART N°
1
2
3
4
5
050.043
050.262
050.306
053.066
053.295
052.260
052.261
050.062
050.063
050.064
050.065
46
QT
DESCRIPTION
ILL N° PART N°
QT
2
2
2
1
1
1
1
1
1
1
1
Brake disc
Brake disc, drilled
Brake disc, Groove type
Brake pad set (4 pieces)
Brake pad set ‘Green Stuff’ (4 pieces)
Securing pin & clip set
Shim set (4 pieces)
RH ‘16 P’ brake calliper
LH ‘16 P’ brake calliper
RH ‘16 PB’ brake calliper
LH ‘16 PB’ brake calliper
6 052.157 1
052.259 1
7 053.061 4
053.090 4
8 052.264 2
9 052.078 2
10 052.245 2
11 162.464 4
12 174.027 2
DESCRIPTION
ILL N° PART N°
Seal kit ‘16 P’ for two callipers
Seal kit ‘16 PB’ for two callipers
Piston for ‘16 P’ type
Piston for ‘16 PB’ type
DO NOT SEPARATE THE TWO PARTS FROM YOUR BRAKE CALLIPERS!
IF YOU HAVE DONE THIS, USE THESE CHANNEL SEALS
Bleed screw
Dust caps, bleed screw
Bolt, calliper attachment
Lock tab
13
14
15
16
17
18
19
20
21
QT
162.463 10
164.006 10
161.026 10
050.066 1
050.067 1
052.262 1
052.263 1
162.462 2
164.012 2
162.033 2
164.002 2
©
V a n
DESCRIPTION
Bolt, disc to hub
Washer, spring
Nut
RH dust cover
LH dust cover
RH bracket for brake hose
LH bracket for brake hose
Screw, dust cover
Washer, spring
Screw, dust cover
Washer, spring
G e s t e l
B & C
2 0 0 5
Steering wheel and column
IIL N° PART N°
QTY DESCRIPTION
1 042.328 1
2 161.022 1
3 083.074 1
4 162.466 3
5 185.026 1
185.156 1
6 185.082 1
7 083.075 1
8 083.076 1
9 043.062 1
10 043.058 1
043.070 1
11 043.069 1
12 121. 197 1
13 134.140 1
134. 14 1 1
134.142 1
©
V a n
Steering wheel, original
(42 dia, leather covered)
Nut, steering wheel
Steering wheel centre boss + horn push
Securing screws
MOTO-LITA, steering wheel, 35 dia
Wood (see page 90 for more choice)
MOTO-LITA, steering wheel, 35 dia
Leather (see page 90 for more choice)
MOTO-LITA, steering wheel boss + cap
Slip ring
Rotor assembly
Column top bush, nylon
Column bottom bush, felt
(when steering lock is not fitted)
Column bottom bush, felt
(when steering lock is fitted)
Clip, retaining
Draught excluder, steering column
Inner column, when no steering
lock is fitted
LHD inner column, when a steering
lock is fitted
RHD inner column, when a steering
lock is fitted
G e s t e l
B & C
2 0 0 5
IIL N° PART N°
QTY DESCRIPTION
14 134.143 1
134.144 1
134.145 1
15 133.072 1
16 133.073 1
17 164.002 2
18 161.002 1
19 162.073 2
20 043.009 2
21 163.001 4
22 043.010 2
23 164.002 2
24 161.002 2
25 043.108 1
26 083.370 1
27 043.109 1
28 162.081 1
29 164.002 1
30 161.002 1
31 162.008 4
32 164.002 4
Outer column, when no steering
lock is fitted
LHD outer column, when a steering
lock is fitted
RHD outer column, when a steering
lock is fitted
Bracket
Blanking plate
Spring washer
Nut
Bolt
Distance piece
Washer,plain
Clamp
Washer, spring
Nut
Steering lock assembly less ignition switch
Switch, ignition
Joint assembly, universal
Bolt, clamping
Washer, spring
Nut
Bolt
Washer, spring
IIL N° PART N°
QTY DESCRIPTION
33 161.002 4
34 043.110 2
35 043.111 1
36 043.112 1
37 043.026 1
38 042.330 1
39 161.273 1
40 083.378 1
41 172.016 4
42 185.026 1
185.156 1
43 185.089 1
44 134.146 1
45 043.094 1
46 043.095 1
47 121.198 1
48 043.100 1
49 083.371 1
50 162.401 1
51 162 … 2
Nut
Plate for coupling
Coupling
Earth wire
UNIVERSAL JOINT
MGC, NORTH AMERICA, Steering wheel (42 dia, leather covered)
Nut, steering wheel
Steering wheel motif, centre
Clips, motif clamping
MOTO-LITA, steering wheel, 35 dia
Wood (see page 90 for more choice)
MOTO-LITA, steering wheel, 35 dia
Leather (see page 90 for more choice)
MOTO-LITA, STEERING WHEEL,
hub and centre cap
(North America specifications)
North America steering wheel column
Top bush, nylon
Bottom bush, nylon
Seal, draught excluder
Steering column lock and ignition switch
Switch ignition
Screw, switch retaining
Bolt, shear
47
Steering rack
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
042.331
042.332
043.126
043.124
172.129
172.226
172.225
043.043
161.053
161.079
043.029
043.125
172.124
043.117
043.118
48
QTY DESCRIPTION
1
1
1
2
1
1
2
2
2
2
2
2
2
1
1
LHD steering rack assembly
RHD steering rack assembly
Rack seals and clip set
Boot seal
Clip, large
Clip, large, pinion side
Clip, small
Socket ball assembly
LOCK NUT
Nut, nylon locking
Boot, dust
Retainer boot, small
Retainer boot, big end
LHD, RACK & PINION
RHD, RACK & PINION
ILL N° PART N°
14
15
16
17
18
19
20
21
22
23
24
25
QTY DESCRIPTION
043.119 2 LOCK NUT
043.120 1 Yoke, rack support
163 …
1 Washer
043.048 1 Spring
043.051 A/R Shim 0.0609 mm
043.052 A/R Shim 0.127 mm
043.053 A/R Shim 0.254 mm
043.050 1 Plate, cover
164.002 2 Washer, spring
162.086 2 Screw, UNC
043.113 1 LHD housing
043.114 1 RHD housing
162.467 1 Screw, retaining
043.116 1 DISC, backing
043.115 1 Bush, pinion
ILL N° PART N°
26
27
28
29
30
31
32
33
34
35
36
37
043.060
043.122
043.047
043.048
043.123
043.063
043.121
161 …
043.066
043.067
164.002
162.085
©
QTY DESCRIPTION
1
2
2
2
2
1
1
1
1
1
2
2
V a n
Oil seal, pinion side
Tie rod
Ball, seating
Spring
Housing, ball
Bearing, pinion
Washer, plain
Nut, bearing retainer
Gasket, end cover
End plate
Washer, spring
Bolt
G e s t e l
B & C
2 0 0 5
Rear suspension
See page 89 for
Superflex bushes
ILL N° PART N°
QTY DESCRIPTION
1 042.060 1
042.062 1
2 042.028 2
3 042.333 2
4 042.521 1
5 042.390 2
6 042.168 2
042.169 2
7 041. 150 1
8 042.334 2
©
V a n
G e s t e l
RH rear shock absorber
LH rear shock absorber
Link, shock absorber to spring
Bolting kit, one shock absorber
to chassis
SPAX rear shock absorber kit
SPAX shock absorber
MGC, Roadster, rear spring
MGC GT, rear spring
Complete mounting kit, for 2 sides
Kit, axle strap & mountings
B & C
2 0 0 5
ILL N° PART N°
9
10
11
12
13
14
15
16
QTY DESCRIPTION
041.086 2
032.196 A/R 041.091 1
041.092 1
041.090 4
041.047 4
041.515 4
041.088 4
041.326 4
041.085 2
041.083 2
Strap only
Repair shaft, axle strap fixing
RH bracket, spring to link
LH bracket, spring to link
Plate, lockating
Pad, spring
Superflex polyurethane pad, spring
‘U’ bolt, normal size
‘U’ bolt, longer size (for SPAX etc.)
Pedestal
BUMP STOP RUBBER
ILL N° PART N°
17
18
19
20
21
22
23
24
25
26
162.037
041.089
041.513
164.021
161.032
041.043
041.044
041.514
041.045
164.006
161.026
161.025
QTY DESCRIPTION
2
2
2
2
2
2
8
8
2
4
4
8
Bolt
Bush, supplied with spring
Superflex polyurethane bush
Washer, spring
Nut
SHACKLE, pins on plate
Bush
Superflex polyurethane bush
Shackle plate
Washer, spring
Nut
Nut
49
Rear axle
50
©
V a n
G e s t e l
B & C
2 0 0 5
Rear axle
Wire wheel conversion
with bolt-on hub (rear)
Part nr.
032.458
1 RH rear hub
Part nr.
032.459
1 LH rear hub
AXLE ASSEMBLY, LESS BRAKE INSTALLATIONS
ILL N° PART N°
QTY
DESCRIPTION
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
030.030
030.031
030.035
030.032
030.033
030.036
030.019
030.020
162.468
161.026
162.034
162.034
032.068
016.064
162.033
162......
164.002
133.513
162.121
164.002
030.040
032.197
032.082
032.008
032.004
032.198
032.007
032.199
032.083
031.010
1
1
1
1
1
1
1
1
4
2
1
1
1
1
8
2
10
1
2
2
1
2
2
2
2
2
2
1
1
2
Disc wheels, 14/43 teeth
(3.071: 1 ratio)
Disc wheels, 13/43 teeth
(3.307: 1 ratio)
Disc wheels, 10/37 teeth
(3.7: 1 ratio)
Wire wheels, 14/43 teeth
(3.071: 1 ratio)
Wire wheels, 13/43 teeth
(3.307: 1 ratio)
Wire wheels, 10/37 teeth
(3.7: 1 ratio)
Disc wheel, case assembly
Wire wheel, case assembly
Bolt, bearing cap
Nut
Plug, drain
Plug, filler
Cover, axle case
Washer, joint, axle case
Bolt
Bolt, clip and cover
Washer, spring
Bracket, compensating lever
Bolt, bracket
Washer, spring
Cage, differential
Wheel differential (RA) 101 to 744 Disc wheels
Wheel differential
Washer, thrust, wheel
Pinion, differential (RA) 101 to 744 Disc wheels
Pinion, differential
Washer, thrust, pinion
Pin, pinion
Roll-pin
Bearing, differential
CROWN WHEEL (WITH PINION)
032.200
1
14/43 teeth (3.071: 1 ratio)
032.201
1
13/43 teeth (3.307: 1 ratio)
10/37 teeth (3.7: 1 ratio)
032.070
1
032.071
8
Bolt, crown wheel to cage
24
COLLAR, DISTANCE
032.072
2
032.073
2
032.074
2
032.075
2
032.076
2
032.077
2
032.078
2
032.079
2
032.080
2
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
©
V a n
G e s t e l
.149” (3.784 mm)
.147” (3.734 mm)
.143” (3.632 mm)
.141” (3.581 mm)
.135” (3.429 mm)
.129” (3.277 mm)
.125” (3.175 mm)
.123” (3.124 mm)
.117” (2.972 mm)
B & C
2 0 0 5
QTY
DESCRIPTION
WASHER, PINION THRUST
032.084
1
.222” (5.64 mm)
032.085
1
.220” (5.59 mm)
032.087
1
.214” (5.44 mm)
032.088
1
.212” (5.39 mm)
032.089
1
.210” (5.33 mm)
031.011
1
Bearing, pinion, inner
032.090
1
Spacer, bearing
031.012
1
Bearing, pinion, outer
031.013
1
Seal, oil
032.091
1
Cover, dust
032.202
1
Flange, universal joint
161.052
1
Nut
032.093
1
Washer, plain
030.021
2
Disc wheel, shaft, axle
030.022
2
Wire wheel, shaft, axle
032.099
2
Spacer, bearing
031.015
2
Bearing
032.089
2
Cap, hub bearing
031.014
2
Seal, oil
032.097
2
Collar, oil seal
032.203
2
Disc wheel, flange, driving
167.036
8
Disc wheel, stud, wheel
161.046
8
Disc wheel, nut, wheel stud
032.104
1
Wire wheel, flange, driving, RH
032.458
1
Conversion hub, RH
032.10S
1
Wire wheel, flange, driving, LH
032.459
1
Conversion hub, LH
167.033 10
Wire wheel, stud
161.065 10
Wire wheel, nut, drum to flange
032.096
2
Collar, drive shaft
032.095
2
Nut, drive shaft
300.113
2
Oil for rear axle 1 L.
032.196 A/R Repair shaft
51
Wheels
52
©
V a n
G e s t e l
B & C
2 0 0 5
Wheels
Part nr.
046.163
‘D’ Type style wheel
15” x 6” alloy wheel
Part nr.
046.062
15” x 6” Alloy wheel
Part nr.
046.024
Centre lock alloy wheel
15” x 6”
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
©
046.023
046.022
046.021
046.020
169.029
169.030
169.031
169.032
046.024
042.075
042.076
042.071
042.072
042.079
042.080
186.034
187.012
185.050
046.045
161.046
V a n
QTY
DESCRIPTION
ILL N° PART N°
5
5
5
5
A/R A/R A/R A/R 5
2
2
2
2
2
2
1
1
1
5
20
Wire wheel, chrome plated, 72 spokes, 5 1/2 x 15”
Wire wheel, painted silver, 72 spokes, 5 1/2 x 15”
Wire wheel, chrome plated, 72 spokes, 5 x 15”
Wire wheel, painted silver, 72 spokes, 5 x 15”
Spoke and nipple, short, bare metal
Spoke and nipple, long, bare metal
Spoke and nipple, short, chrome plated
Spoke and nipple, long, bare metal
Centre locking, alloy wheel
RH, 2 eared, MG creasted
LH, 2 eared, MG creasted
RH, 2 eared
LH, 2 eared
RH, continental style
LH, continental style
1/2 KGR. COPPER GREASE, for hubs and spinners
Silicone spray, to protect your chrome wire wheels
Wire wheel cleaning brush
Wheel, disc type
Nut for disc wheel
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
G e s t e l
B & C
2 0 0 5
141.352
046.046
161.296
141.040
141.041
187.013
187.004
187.002
133.143
133.596
133.59 7
132.102
153.056
133.140
200.662
200.655
133.141
133.142
200.663
042.097
QTY
DESCRIPTION
4
5
20
4
A/R A/R A/R A/R 1
1
1
1
1
1
1
1
1
1
1
1
Chrome hub cap
Wheel, rostyle
Wheel nut, chrome plated
Hub cap, rostyle
Badge “MG” for hub cap
Spray, primer on metal
Spray, Silver paint
Spray, black paint
Wheel clamp, wire wheel only
Wheel clamp, disc wheel only
Wheel clamp, rostyle wheel only
JACK assembly
Toolbag
Lever, hub cap remover
Spanner box, sparking plug
Tommy bar, box spanner
Spanner, octagonal style
Spanner, wheel nut 161.046
Spanner, wheel nut 161.296
Hammer, copper-hide
53
Electrics
54
©
V a n
G e s t e l
B & C
2 0 0 5
Electrics
Quality ignition products for your classic
Originaly for Neg. earthed cars, ask
Optronic
for wiring info when Pos. earthed
ignition system
Part nr.
086.082
Power supply module
086.081
Fitting kit for distributor
To replace contact breakers and condensers
Lumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally
fitted with mechanical distributors using contact points. The advantage of the Lumenition
system is that it contains no wearing parts, requires no adjustment or maintenance during
service and once ignition timing is set it will remain permanently tuned. The engine will
start better, last longer and run more economically through improved efficiency. There are
only three components, very compact and simple to fit.
System with
mechanical distributor
and contact points.
Part nr.
Magnetronic ignition system
Lumenition,
no wearing parts
& allways perfect
timing.
Module bracket for classics
• Professional installation
• No new holes required
• Uses coil mounting bolts
For use with Optronic
and Performance
module
Lumenition is proud to present the NEW Magnetronic Ignition System. Designed to
replace troublesome points with a simple drop in installation. Each unit comes complete,
ready to fit straight into your existing distributor. You will notice that your car will start
immediatly, have better fuel consumption, and increased performance. The Magnetronic
Ignition System is suitable for most Lucas distributers, NEGATIVE EARTH and with or
without vacuum advance.
The benefits of the Magnetronic are: it is
quick & easy to fit, completely self contained
within the distributor and is a two wire connection.
The unit is housed in a solid die-cast dissipating
body which is
unaffected by
distributor wear
and gives all
the advantages associated with our
Ignition Systems.
Ask your local
Anglo-Parts
shop for more
information
NEGATIVE EARTH ONLY!
Part nr.
086.579
Also available: alternative: Lightweight and very powerful startermotor, see page 87
ILL N° PART N°
QTY DESCRIPTION
1 081.1 72 1 Distributor assembly, 25D6
E.C.M. CURVE 888, RANGE 13° -15° SUCTION 2-6-3
2 081.163 1 Cap
3 081.161 1 ROTOR ARM
4 081.017 1 Condensor
5 081.016 1 Contact set
6 081.052 1 Earth lead
9 081.049 1 Terminal bush & lead
11 081.336 1 Spring set, assortment of 5 pieces
12 081.763 1 Screw and washer kit
14 081.176 1 Vacuum unit
15 081.061 1 ‘0’ ring
16 081.021 1 Clamp
17 162.132 1 Bolt
18 LUMENITION OPTRONIC IGNITION originally Negative Earth, ask info for positive earth!
This is an electronic ignition conversion principally for cars originally fitted with mechanical distributors using contact breaker points and condensor. The advantage is that it contains no wearing parts, requires no adjustment or maintenance and once ignition timing is set it will remain permanently in tune.
086.081 1 Rotor for 22D, 23D, 25D, 31D
086.082 1 Power module, OPTRONIC, photo transistor
LUMENITION MAGNETRONIC IGNITION
086.579 1 only Negative Earth, see top of this page!
19
21
22
23
24
25
26
27
28
29
30
31
32
©
082.003
082.159
133.555
081.036
081.038
081.039
081.040
161.061
133.556
081.177
081.091
081.064
081.092
172.248
133.557
V a n
2
2
2
4
4
2
2
4
2
1
1
1
1
2
1
G e s t e l
6 VOLT BATTERY DRY CHARGED
6 VOLT BATTERY in black rubber casing, DRY CHARGED
Complete battery fixing kit (for one battery)
Battery bolt
Pad, under battery
Pad, under battery clamp
Battery clamp
Self locking nuts
6 Volt battery top plate, an alternative for 081.040
Vacuum pipe, metal
1 meter vacuum pipe, black plastic
Connector, straight
Connector, 90°
Clip, vacuum pipe
Bracket, vacuum pipe
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
33 082.029 1
082.149 1
34 081.157 1
35 081.159 1
36 081.178 1
37 081.179 1
38 081.074 1
39 081.158 1
40 082.030 1
082.010 1
41 081.180 1
42 084.152 1
43 083.117 1
44 083.118 1
45 084.005 1
46 081.181 1
47 081.182 1
48 081.184 1
49 081.185 1
1
50 081.187 1
081.188 1
51 133.558 1
52 163.008 1
53 164.002 1
54 081.026 1
55 133.559 1
56 133.560 1
57 163.008 1
58 164.002 1
59 161.002 1
60 162.129 1
61 163.008 1
62 162.081 1
63 041.087 1
64 163.001 1
65 161.012 1
Starter motor assembly
Modern replacement starter motor
Solonoid
Drive end
Bush, drive end side
Bush, rear side
BRUSH set
Spring set
Original alternator to be used with “4TR” control box
(16AC TYPE, plastic half section)
Alternative alternator (ACR TYPE) These alternators should be used
together with our 081.180 socket conversion kit.
Socket conversion kit, will fit all 16ACR TYPE AL TERNA TORS
Control box “4TR”, for 16AC alternator only!
Fuse box
Cover
Fuse set, 35 AMP
Pulley fixing kit: key, nut, spring, washer
Fan, alternator (all types)
Pulley, alternator (all types)
BRUSH SET, 16AC TYPE
BRUSH SET, 16ACR TYPE
Bearing, drive end
Bearing, slip end
Adjusting link
Washer, plain
Washer, spring
Screw, UNC
Pillar, adjusting link
Ring, tolerance, pillar
Washer, plain
Washer, spring
Nut
Bolt, long
Washer, plain
Bolt, rear
Spacer, cut to length!
Washer, plain
Nylon insert locking nut
55
Dashboard components - European
56
©
V a n
G e s t e l
B & C
2 0 0 5
Dashboard components - European
Part nr.
150.895
These dashboards are made from a thin
layer of walnut verneer on a sturdy
backplate with multiple layers of gloss
varnish. They are made to stick on the
existing dashboard without having to
screw or make holes. Applying these
dashboards is easy and the finish
magnificent.
IIL N° PART N°
1
2
3
4
5
6
7
8
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
42
43
44
©
083.066
083.067
083.068
083.069
083.070
162.137
083.072
083.073
083.074
083.075
083.076
083.394
162.494
083.438
083.079
163.013
162.138
083.080
162.139
162.140
164.015
083.081
162.141
163.013
164.015
161.047
083.082
085.015
083.038
083.035
083.083
083.084
083.085
083.086
083.087
083.088
083.089
083.034
083.421
083.440
083.432
083.094
083.147
V a n
QTY DESCRIPTION
2
2
2
1
1
4
1
1
1
1
1
2
4
1
1
1
1
1
2
2
2
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
G e s t e l
Shield, flasher warning
Window, flasher warning
Tube, lamp
Bracket
Cowling indicator switch LHD
Screw
Direction indicator
Repair kit, spring with bush
Horn push assembly
Slip-ring
Rotor assembly
Switch, courtesy light
Tap screw
GT, heated backlight switch
Unit flasher
Washer, plain
Screw
Headlamp dimmer
Screw
Screw
Washer, spring
Bracket
Screw
Washer, plain
Washer, spring
Nut
Switch, overdrive control
Badge, normal-overdrive
Switch, panel light
Barrel & key
Switch, ignition (less barrel & key)
Switch, lighting
Switch lighting, pull type
Sigar lighter ass.
Switch, wiper
Switch, heater
Switch, gear illumination, automatic
Switch, map lamp
Voltage stabilizer
Gauge, fuel, BF 2226/00
Gauge temp. + oil press.
Gauge temp. + oil press.
Gauge temp.+ oil press.
B & C
2 0 0 5
IIL N° PART N°
GD 1301/19, Fahrenheit
GD 1301/20, Centigrade
GD 1301/21, cold, normal, hot
QTY DESCRIPTION
45 083.096 2
46 172.020 1
47 134.030 1
48 083.097 1
49 083.001 1
50 162.065 1
51 164.012 1
52 163.035 1
53 083.098 1
54 172.062 1
55 162.060 1
56 164.015 1
57 172.063 1
58 172.064 1
59 083.441 1
083.442 1
083.443 1
083.444 1
083.445 1
60 083.439 1
61 083.434 2
62 172.066 1
63 164.015 4
64 161.057 4
65 083.446 1
083.447 1
66 172.065 2
67 083.454 2
68 083.455 2
69 083.456 2
71 134.026 1
083.007 1
083.448 1
72 122.004 1
73 162.049 2
74 164.015 2
75 161.024 2
76 083.020 1
77 083.019 1
78 084.071 1
Strap fixing
Clip
Pipe, oil pressure
Grommet
Connector, pipe
Screw
Washer, spring
Spacer, screw
Pipe, flexible
Clip
Screw
Washer, spring
Clip
Bracket, retaining-pipe
Speedometer KPH, SN6144/11
Speedometer KPH, SN6144/12 Germany
Speedometer KPH, SN6144/32 Overdrive
Speedometer MPH, SN6144/1 0
Speedometer MPH, SN6144/31 Overdrive
Rubber ring & seal kit, to serve all gauges. For each gauge are 3 seals, to mount glass and bezel to gauge body and body to fascia panel
2” chrome ring
Clamp, fixing
Washer, spring
Nut
Tacho,RV12619/00
Tacho, RV1 2630/00
Clamp, fixing
Glass, small, 2”
Glass, large, 4”
4” chrome ring
Speedometer cable LHD, STD 127 cm
Speedometer cable LHD, OlD 168 cm
Speedometer cable LHD, AUTOMATIC 142 cm
Grommet
Screw
Washer, spring
Nut
Cover, lens
Lens
Lamp seating
57
Dashboard components - USA
58
©
V a n
G e s t e l
B & C
2 0 0 5
Dashboard components - USA
Part nr.
150.225
Dash pad assembly
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
©
150.225
150.224
133.270
083.063
083.016
083.017
083.018
172.021
172.022
083.342
084.127
083.349
083.350
083.345
083.339
083.340
083.341
083.329
083.331
083.477
083.478
184.135
084.126
083.479
083.480
083.481
083.482
083.483
083.040
083.130
083.115
084.123
083.484
083.485
083.360
083.361
083.486
083.336
083.395
083.487
083.394
162.467
083.488
162.506
083.344
162 …
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
2
2
1
1
1
2
5
1
1
1
1
1
1
1
2
2
1
1
1
1
2
2
2
4
4
2
1
1
1
1
1
1
1
2
4
1
2
1
2
G e s t e l
DASH PAD ASSEMBLY
DASH REPAIR PIECE (top part only)
CONZOLL PANEL
SET, BLANKING - RAPID HOLE
BEZEL - CHROME
PLATE, BLANKING
Badge, -=MG=-
CLIP
PLATE, CLAMPING
Brake check light
Bulb
Clip, spring
Clip, spring
Bezel & switch guide
Switch, lighting {original type}
Switch & bezet lighting {alternative}
Switch & bezel, lighting illuminated {alternative}
Switch,heater (original type)
Switch & bezel, heater (alternative)
Body, warning light, ignition, red
Body, warning light, high-beam, blue
Bulb holder
Bulb
Warning light assembly, alternative, red
Warning light assembly, alternative, amber
Warning light assembly, alternative, green
Warning light assembly, alternative, blue
Window, direction indicator
Window, plain green {alternative}
Shade, aluminium piece between bulb holder and window
Bulb holder
Bulb
Shade
Window, GT, heated backlight (OPAL LENS)
Window, hazard warning (RED LENS)
Bracket
Hazard unit, 3 pole
Switch, hazard warning
Switch, map light
Switch, GT, heated backlight
Switch, courtesy light
Tap screw
Switch, panel light
Screw, N° 6 UNC x 1/4”
Switch, ignition
Screw, switch
B & C
2 0 0 5
ILL N° PART N°
37
38
39
40
41
42
43
44
45
46
47
48
49
50
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
083.355
083.356
083.035
083.489
162.046
162 …
083.318
083.490
083.322
083.086
133.581
133.582
172.058
172.059
063.076
063.077
161.320
163.012
163.034
164.023
161.054
083.468
141.356
083.504
083.096
164.015
161.057
083.101
083.421
083.505
083.507
083.506
172.065
083.508
083.501
083.502
083.503
083.509
172.066
023.154
083.510
083.511
083.512
172.194
163.005
012.140
QTY DESCRIPTION
1
1
1
1
2
2
1
1
1
1
1
1
2
2
1
1
1
4
2
2
2
1
1
1
2
6
6
2
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
2
1
Spindle, extension
Housing, ignition switch
Barrel and key
Pair steering cowls
Screw, cowl
Screw, cowl
Switch, direction indicator, horn and headlamp dipper
Striker, switch
Switch, windscreen wiper, washer and overdrive
Lighter assembly, cigar
Control assembly, heat
Control asembly, air
Clip, for knob locking
Pin, for knob locking
KNOB, heat control
KNOB, air control
Nut, tube distance
Washer, plain
Washer, plain
Washer, spring
Nut
Oil pressure gauge, BP 1200/02
Chrome bezel, oil gauge
Gauge, temperature (electrical), BT 2218/00
Clamp, gauge fixing
Washer, spring
Nut
‘0’ ring
Voltage stabilizer
Fu~gaug~BF2223/00
Tachometer {RV1 1612/00}
Tachometer (RV1 1613/00)
Clamp
Ring, rubber
Speedometer, MPH {SN 5226/00}
Speedometer, MPH {SN 5226/02}
Speedometer, MPH {SN 5227/02}
Control, remote
Clamp
Box, angle drive
Speedo cable, STD, 138 cm
Speedo cable, OlD, 212 cm
Speedo cable, Auto., 153 cm
Rivet
Washer
Temperature transmitter
59
Wiper motor - Wiring harness
60
©
V a n
G e s t e l
B & C
2 0 0 5
Wiper motor - Wiring harness
Part nr.
082.006
Wiper motor
excluding gear
ILL N° PART N°
QTY DESCRIPTION
1 083.530 2/3
083.533 2
2 087.001 2/3
087.002 2
3 087.003 2/3
087.004 2
4 083.104 2
083.105 2/3
5 083.111 2/3
083.112 2
6 083.109 2/3
083.110 2
7 083.107 2/3
083.108 2
8 083.106 2/3
9 082.006 1
10 083.523 1
11 083.524 1
12 083.525 1
13 083.526 1
083.527 1
083.528 1
14 133.138 1
15 133.139 1
16 162.018 2
17 164.012 2
18 163.011 2
19 133.137 1
20 133.132 1
133.133 1
133.584 1
21 133.134 1
133.585 1
133.586 1
133.135 1
22 133.136 1
23 083.024 1
24 080.032 1
080.033 1
080.094 1
080.087 1
080.228 1
080.229 1
©
V a n
G e s t e l
Wheelbox fitting kit,
2 required for European Roadsters, 3 required for u.s. spec.
Wheelbox fitting kit, GT only
Wiper blade, MGC
Wiper blade, MGC GT
Wiper arm, MGC
Wiper arm, MGC GT
Wheelbox, MGC Metal dash
Wheelbox, Padded dash & all GT’S
Distance piece, MGC
Distance piece, MGC GT
Seal, MGC
Seal, MGC GT
Chrome cone, MGC
Chrome cone, MGC GT
Octagonal chrome nut
Wiper motor (excluded gear)
Brush set
Armature
Switch, parking
Gear, 105°, MGC
Gear, 115°, MGC GT early
Gear, 125°, MGC GT late
Pad, wiper motor
Distance block
Screw
Spring washer
plain washer
Strap
Casing, motor to wheel box, MGC
Casing, motor to wheel box, MGC GT
Casing, motor to wheel box, cut to required length
Casing, wheelbox to wheel box, MGC
Casing, LH wheel box to central wheel box, MGC USA
Casing, RH wheel box to central wheelbox, MGC USA
Casing, wheelbox to wheelbox, MGC GT
Casing, wheelbox end
Rack, cut to length
Main wiring harness, 1968-’69
GCN 1.1 01 > 4265 with seperate alternator control box
Main wiring harness, 1969
GCN 1.4266 - on without seperate alternator control box
Main wiring harness, 1968-’69
GCN1.101 > 4265, N. America with seperate alternator control box
Main wiring harness, 1969
GCN 1.4266 - on, N. America without seperate alternator control box
Tail harness for roadster
Tail harness for GT
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
25 080.095 1
080.096 1
080.097 1
080.098 1
080.100 1
26 080.009 1
27 080.014 1
28 080.013 1
29 080.099 1
30 083.534 1
31 083.535 2
32 083.536 2
33 083.537 1
34 083.538 A/R
35 083.539 1
36 083.540 1
37 083.541 A/R
38 083.542 A/R
39 083.180 A/R
40 083.041 A/R
41 083.042 A/R
42 083.043 A/R
43 083.169 A/R
44 084.005 A/R
45 083.124 1
083.125 1
46 083.126 1
47 122.002 A/R
122.005 2
122.006 1
122.001 1
48 172.252 A/R
49 083.079 1
083.172 1
50 083.543 1
51 190.058 1
Harness, dipper switch
Harness, reverse switch
Harness, automatic option
Harness, overdrive option
Harness, wiper motor, MGC GT
Cable, earth
Cable, battery (negative) to earth
Cable, battery to battery
Cable, battery (positive) to solonoid
Connector plug, tachometer
Connector plug, 3 way
Connector plug, 3 way (reverse lamp)
Connector plug, control box, “4TR”
Connector plug, 17,5 AMP
Connector plug kit for “ACR” alternators
Connector plug,”ACR” EUROPEAN ALTERNATORS
Connector pin, will fit into moulded multi way plugs
Connector socket, will fit into moulded multi way plugs
Cable terminal. For more terminals, please use your “Tool Catalogue”
Cable connector, single
Cable connector, double
Cable connector, triple
Fuse holder
Set of 3 fuses, 35 AMP
Horn, high note
Horn, low note
Horn bracket
Grommet, 1 “-3/16”
Grommet, rear valance 5/8”-3/16”
Grommet, boot floor inwards
Grommet, main harness.
For more grommets, please use your “Tool Catalogue”
Clip harness to wheel arch
Flasher unit, 3 pole
Flasher unit, 2 pole
Control, warning light
“TOOL CATALOGUE”
61
Lights and lamps
62
©
V a n
G e s t e l
B & C
2 0 0 5
Lights and lamps
Part nr.
084.604
5” fog lamp
Part nr.
084.603
rear fixing
5” spot lamp
rear fixing
Part nr.
5” fog lamp
084.191
Part nr.
084.193
5” spot lamp
Part nr.
284.090
Part nr.
Spare fog lamp glass
084.194
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
©
084.081
133.050
084.051
172.043
162.507
084.052
083.115
084.123
084.054
084.019
084.110
084.111
172.044
084.082
084.105
084.103
084.107
084.053
084.087
166.065
084.055
084.064
084.068
084.062
084.069
084.066
084.377
084.065
084.378
084.067
162.161
084.379
084.380
162.312
161.024
V a n
Part nr.
084.196
QTY DISCRIPTION
2
2
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
6
2
2
4
2
2
2
2
2
2
2
4
2
2
8
8
G e s t e l
Seal, headlamp bowl to body
Headlamp bowl
Kit, lamp adjusting screws & spring
Clip, headlamp rim retaining
Screw kit, head lamp bowl to body
Wire & lamp adaptor
Bulb holder, when pilot lamp is fitted in headlamp
Bulb, for pilot lamp
Bulb, clear
Bulb, yellow
Bulb, H4, clear
Bulb, H4, yellow
Clip, bulb retaining
Lamp unit, European homologated, LHD
Lamp unit + hole for pilot lamp, European homologated, LHD
H4 lamp unit, European homologated, LHD
H4 lamp unit + hole for pilot lamp, European homologated, LHD
Inner bowl
Inner chrome ring
Screw
Chrome head lamp rim
Side & flasher lamp assembly (white & amber)
Gasket
Bulb
Bulb
Lens, white
Lens, amber (US)
Lens, amber
Lens, white (Italy)
Rim
Screw
Reflector, amber, front (US)
Reflector, red, rear (US)
Sc rew
Nut
B & C
2 0 0 5
5” halogen spot lamp with round back
Spare spot lamp glass
ILL N° PART N°
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
084.191
084.193
084.194
084.196
084.198
084.119
084.056
084.057
084.058
084.059
084.060
084.061
084.270
084.062
084.063
084.075
084.076
162.404
084.125
084.251
084;070
084.071
141.021
084.074
083.019
083.020
162.110
162.111
161.047
084.095
084.077
084.078
084.079
162.112
162.403
Comes with halogen bulb for modern lighting. Sold in pairs
QTY DISCRIPTION
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
2
4
2
2
1
2
2
2
2
2
4
2
1
1
1
2
2
Fog lamp assembly (illustrated) (not E11 homologated)
Spot lamp assembly (not E11 homologated)
Light unit for fog lamp (illustrated)
Light unit for spot lamp
Bulb, fog lamp
Bulb, spot lamp
Rear lamp assembly, amber & red
Gasket, lamp to body
Gasket, lens to lamp
Rim, lens retaining
Lens, stop & tail, red (with reflector)
Lens, amber, flasher
Lens, red, flasher (US)
Bulb, flasher
Part nr.
Bulb, stop and tail
185.337
5” lamp
Reverse lamp assembly
Lens, gasket & screws
protection cover
Screw
Bulb
Gasket
Number plate lamp
Seal, lens seating
PAIR LAMP PLINTHS
Bulb
Lens
Cover
Screw, short
Screw, longer
Nut, self locking
Bulb holder assembly
GT, roof lamp
Lens
Bulb
Screw
Screw, rim retaining
63
Body panels
ILL N° PART N° QTY DESCRIPTION
ILL N° PART N° QTY DESCRIPTION
ILL N° PART N° QTY DESCRIPTION
1 133.049 2
2 131.060 1
3 131.061 1
4 152.011 1
5 152.012 1
6 134.031 1
134.001 1
7 134.002 1
8 134.003 1
9 134.004 1
10 134.005 1
11 134.006 1
12 138.060 1
138.061 1
138.062 1
138.063 1
13
14
15
16
17
18
20
22
23
24
25
26
27
28
29
30
31
32
33
64
Complete bolting kit to fit one
front wing
Rear valance
Rear valance, lower part only
Fastener set, mouldings
(6 plates on stud)
Fastener set, mouldings
(50 clips on rivet)
6 piece moulding set
RH front wing moulding
LH front wing moulding
RH door moulding
LH door moulding
RH rear wing moulding
LH rear wing moulding
RH front wing, roadster,
good reproduction
LH front wing, roadster,
good reproduction
RH front wing, GT, good reproduction
LH front wing, GT, good reproduction
131.066
131.067
131.068
131.069
131.075
131.076
131.079
131.080
131.081
131.082
131.083
131.084
131.070
133.052
131.326
131.327
132.408
132.080
132.081
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RH front wing, roadster, original
LH front wing, roadster, original
RH front wing, GT, original
LH front wing, GT, original
RH door, roadster
LH door, roadster
RH door, GT
LH door, GT
RH rear wing, roadster
LH rear wing, roadster
RH rear wing, GT
LH rear wing, GT
Front valance
Fastener kit, front valance
Top panel, European
Top panel, US
Rear decking panel
RH splash plate
LH splash plate
133.043
133.044
121.014
121.015
121.127
121. 128
152.080
133.054
132.086
132.087
132.088
132.089
132.092
132.093
131.085
131.086
132.090
132.091
132.084
132.085
©
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
RH mini splash plate
LH mini splash plate
RH seal, top
LH seal, top
RH seal, splash plate
LH seal, splash plate
Rivet set (50 pieces)
Bolting kit, splash plate
RH front wing repair panel
LH front wing repair panel
RH door skin
LH door skin
RH door bottom repair piece
LH door bottom repair piece
RH rear wing repair panel
LH rear wing repair panel
RH rear wing lower part
LH rear wing lower part
RH ‘B’ post panel
LH ‘B’ post panel
V a n
G e s t e l
B & C
2 0 0 5
Inner body panels
ILL N° PART N°
QTY DESCRIPTION
1 131.050 1
131.051 1
131.052 1
131.053 1
2 131.054 1
131.055 1
3 131.056 1
131.057 1
4 131.058 1
131.059 1
5 133.045 1
133.046 1
6 133.047 2
7 133.601 2
8 132.411 1
132.412 1
9 132.071 1
132.072 1
132.073 1
132.074 1
©
V a n
G e s t e l
RH inner side member
RH inner side member repair piece,
123 cm
LH inner side member
LH inner side member repair piece,
123 cm
RH under castle
LH under castle
RH inner sill
LH inner sill
RH outer sill
LH outer sill
RH sill end plate
LH sill end plate
Reinforcement, above jacking point
JACKING POINT
RH reinforcement, inner wing
LH reinforcement, inner wing
RH side panel, Roadster
LH side panel, Roadster
RH side panel, GT
LH side panel, GT
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
10 132.075 1
132.076 1
132.077 1
132.078 1
11 131.395 1
131.396 1
131.397 1
12 131.398 1
131.399 1
13 131.400 1
131.401 1
14 132.402 1
132.403 1
15 131.404 1
16 132.413 1
17 133.602 1
18 132.414 1
19 132.415 1
20 132.416 1
132.417 1
21 131.405 1
RH ‘A’ post, Roadster
LH ‘A’ post, Roadster
RH ‘A’ post, GT
LH ‘A’ post, GT
RH inner front wheel arch,
European
RH inner front wheel arch, US
LH inner front wheel arch
RH side member
LH side member
RH side member upper plate
LH side member upper plate
RH chassis box section
LH chassis box section
Cross member, front suspension
Platform, bonnet locking
Support, platform
Radiator duct panel
Cross profile, radiator duct
RH radiator support panel
LH radiator support panel
Crossmember
ILL N° PART N°
22
23
24
25
26
27
28
29
30
31
32
33
34
35
131.406
131.407
131.408
131.409
132.344
132.345
133.041
133.042
131.043
131.044
132.055
132.056
132.062
132.063
132.060
132.061
132.053
132.054
131.040
132.343
132.052
121.012
152.010
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
5
RH floor assembly
LH floor assembly
RH floor, front section
LH floor, front section
RH heel board
LH heel board
RH bracket, spring mounting
LH bracket, spring mounting
RH side, rear member
LH side, rear member
RH springhanger, repair section
LH spring hanger, repair section
RH outer wheel arch
LH outer wheel arch
RH inner wheel arch part
LH inner wheel arch part
RH boot floor side panel
LH boot floor side panel
Boot floor panel
Battery box
Panel, battery cover
Seal
Fastener
65
Boot and bonnet
66
©
V a n
G e s t e l
B & C
2 0 0 5
Boot and bonnet
Part nr.
141.022
Part nr.
133.868
Part nr.
172.233
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
©
QTY DESCRIPTION
141.022 1
172.033 6
133.056 1
122.011 1
133.603 1
121.072 1
150.019 1
171.008 1
163.001 1
121.028 1
150.365 1
131.410 1
131.412 1
134.150 1
172.042 3
161.002 2
172.056 1
162.135 1
121.216 1
133.081 4
162.047 8
164.015 8
161.024 8
161.026 1
171.009 1
133.057 1
133.058 1
133.059 1
162.029 3
164.012 3
171.010 1
133.060 1
133.061 1
161.042 3
162.060 3
133.062 1
162.060 2
164.015 2
163.013 2
133.063 2
161.019 4
164.012 4
163.011 4
162.077 4
162.029 4
164.012 6
163.011 6
161.019 2
141.054 1
133.069 1
141.364 1
172.031 15
141.001 1
150.020 1
V a n
G e s t e l
Air intake
Clip
Bracket rubber
Rubber
Bonnet buffer kit
Bonnet seal
Rod
Spring
Washer, plain
Seal, rear
Insulation pad bonnet
Bonnet aluminium
Bonnet fiber glass
Cable bonnet pull
Clip
Nut
Fastener cable
Screw fastener
Seal, bonnet front
Buffer
Screw
Washer, spring
Nut
Nut adjuster
Spring
Plate
Pin
Cup lock lockation
Screw
Washer, spring
Spring
plate catch
Safety catch
Nut
Screw
Bracket
Screw
Washer, spring
Washer, plain
Hinge bonnet
Nut
Washer, spring
Washer, plain
Screw
Screw
Washer, spring
Washer, plain
Nut
Lock set, boot & doors (3 pieces)
Gasket set, boot lock & door handles
Badge MG
Clip
Badge (set of 3 pieces)
Rod
B & C
2 0 0 5
Air intake grill
Stainless steel mesh
Blind fix, 6 required
ILL N° PART N°
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
QTY DESCRIPTION
171.008 1
163.001 1
172.030 1
162.061 2
133.065 1
163.011 2
164.012 2
162.077 2
162.060 2
164.015 2
163.013 2
133.066 1
163.013 2
164.015 2
162.060 2
131.090 1
121.032 1
133.067 1
133.068 1
162.029 12
164.012 12
132.418 1
121.217 1
141.365 1
133.604 1
172.167 6
131.103 1
133.605 1
133.606 1
162.143 4
133.607 A/R
161.002 6
164.002 6
163.001 6
141.056 1
141.057 1
141.058 2
152.043 2
152.042 2
161.326 4
164.007 4
163.011 4
164.041 4
167.104 2
163.008 2
164.002 2
161.012 2
133.608 1
141.366 1
152.112 1
152.045 A/R
121.055 1
134.032 1
162.467 10
121.032 1
Spring
Washer
Clip
Screw
Stricker
Washer, plain
Washer, spring
Screw
Screw
Washer, spring
Washer, plain
Latch lock
Washer, plain
Washer, spring
Screw
Boot lid steel
Sealing boot lid
RH hinge
LH hinge
Screw
Washer, spring
plate, seal retainer
Seal above radiator
Bonnet moulding
Fastener kit, bonnet moulding
One plate on stud only
GT tailgate
RH tail hinge
LH tail hinge
Screw
PACKING hinge
NUT
Washer, spring
Washer, plain
RH stay assembly
LH stay assembly
Cover
Cap & starlock, large
Cap & starlock, small
Dome nut, chrome
Washer, shakeproof
Washer, plain
Washer, anti rattle
Stud, pivot stay
Washer, plain
Washer, spring
Nut, locking
Catch cover, GT only
Letterset “MGC GT”
23 pieces blind fixing studs
Blind fix
Seal (foam), outer
Seal retainer
Screw
Seal, inner
67
Door fittings, part 1
68
©
V a n
G e s t e l
B & C
2 0 0 5
Door fittings, part 1
Racing mirror
Originally this racing mirror was designed for Mini! Due to it’s
success these mirrors can be found on many classic cars.
• 141.851 LH door
• 141.850 RH door
Part nr.
141.968
Lock fitting kit
Designed to prevent the lock
from rotating in the door shim.
Door mirror arm on spring
(incl. rubber gasket & screws)
• 141.123 LH mirror arm
• 141.122 RH mirror arm
Part nr.
141.125
Mirror head
Chrome plated door mirror
(including all pieces shown on photo)
• 141.113 LH door
• 141.112 RH door
Also available:
black painted door mirror
• 141.115 LH door
• 141.114 RH door
ILL N° PART N°
QT
1 121.023 1
121.024 1
2 121.025 1
121.026 1
3 150.029 2
4 122.012 2
5 121.060 4
6 121.057 1
121.058 1
121.070 1
121.071 1
7 122.032 4
8 121.218 2
9 152.039 14
10 172.164 14
11 134.017 1
134.018 1
12 133.069 1
13 141.045 1
14 141.367 1
141.368 1
141.369 1
15 162.308 A/R
16 152.039 A/R
17 150.038 1
150.039 1
150.040 1
150.023 2
150.022 2
150.024 2
18 141.054 1
141.053 1
141.347 1
19 122.182 2
20 172.206 2
21 141.097 2
22 133.097 2
133.098 2
©
V a n
G e s t e l
DESCRIPTION
ILL N° PART N°
RH drop glass seal
LH drop glass seal
RH seal, frame to door
LH seal, frame to door
Inner draught excluder strip
Corner block
Channel seal
RH 1/4 light seal, Roadster
LH 1/4 light seal, Roadster
RH 1/4 light seal, GT
LH 1/4 light seal, GT
DOOR PLUG, plastic
Seal under 1/4 light, GT ONLY
Rivet
Fasteners, GT only
RH door finisher, GT
LH door finisher, GT
Gasket set
Door seal finisher set, Roadster
Pair door finishers, GT
RH finisher
LH finisher
Screw
Rivet
2 door seals, black velour + rubber
2 door seals, red velour + rubber
2 door seals, black PVC + rubber
1 door seal, GT, black velour + rubber
1 door seal, GT, red velour + rubber
1 door seal, GT, black PVC + rubber
Set of 3 locks
Pair door locks
AN IMPROVED PAIR DOOR LOCKS,
with threaded body and steel securing nut instead of spring-
clip fastening
Rubber ring behind door locks (included in 141.054)
Lock clip (included in 141.054)
Door handle
RH door hinge
LH door hinge
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
B & C
2 0 0 5
QT
133.609 4
133.099 8
162.083 12
162.143 16
163.009 4
164.021 4
161.032 4
122.183 4
152.113 4
163.013 4
164.015 4
161.024 4
133.268 2
172.191 4
152.114 2
172.261 2
141.143 1
141.144 1
141. 145 4
163.013 6
164.015 6
162.060 6
133.610 1
133.611 1
133.612 1
133.613 1
133.614 1
133.615 1
133.598 1
133.599 1
133.449 1
133.450 1
133.120 A/R
162.146 6
162.098 2
162.058 4
133.122 2
133.121 2
141.049 2
162.142 4
DESCRIPTION
OVERSIZE HING PIN
Tapping plate
Screw, hinge to door
Screw, hinge to ‘A’ post
Washer, plain
Washer, spring
Nut
Rubber buffer
Rivet, buffer to hinge
Washer, plain
Washer, spring
Nut
Connector
Clip, rod to lock
Fastener, non adjustable rod
Retainer, rod to door
RH, release handle
LH, release handle
Bezel, black plastic
Washer, plain
Washer, spring
Screw
RH operating rod
LH operating rod
RH locking rod, adjustable (illustrated)
LH locking rod, adjustable (illustrated)
RH locking rod, non adjustable (not ill.)
LH locking rod, non adjustable (not ill.)
RH door lock
LH door lock
RH stricker plate
LH stricker plate
Shim
Screw, lock to door
Screw, stricker plate (long)
Screw, stricker plate (short)
Tapping plate, top
Tapping plate, bottom
Handle, door pull
Screw
69
Door fittings, part 2
70
©
V a n
G e s t e l
B & C
2 0 0 5
Door fittings, part 2
Part nr.
185.049
Steel
badge clamp
fits on badge bar
Part nr.
Part nr.
085.158
133.834
Chrome plated ‘RAC’ badge
very high quality finish
ILL N° PART N° QTY
1 140.189 1
140.190 1
140.191 1
140.192 1
2 140.193 1
140.194 1
140.195 1
140.196 1
3 121.057 1
121.058 1
4 121.070 1
121.071 1
5 122.012 2
6 121.060 4
7 121.025 1
121.026 1
8 121.218 2
9 120.015 2
120.042 2
10 120.043 1
120.044 1
120.045 1
120.046 1
11 133.150 1
133.151 1
12 133.154 1
133.155 1
13 133.616 1
133.617 1
14 133.618 1
133.619 1
15 162.158 4
16 162.115 4
17 162.159 6
18 162.527 4
19 162.528 4
20 162.168 4
21 164.002 4
22 152 …
2
23 161.060 4
24 164.012 1
25 133.622 2
26 133.623 2
27 133.624 A/R
28 161.019 2
29 164.012 2
30 163.010 2
31 133.626 A/R
32 121.061 2
33 140.049 1
140.050 1
34 141.370 1
141.371 1
35 141.372 1
141.373 1
36 141.374 1
141.375 1
37 133.161 1
133.162 1
38 141.376 1
141.377 1
©
V a n
G e s t e l
RH quarter light with curved handle (A)
LH quarter li1ht with curved handle (A)
RH quarter ight with flat handle (B)
LH quarter light with flat handle (B)
GT RH quarter light with curved handle (A)
GT LH quarter light with curved handle (A)
GT RH quarter light with flat handle (B)
GT LH quarter light with flat handle (B)
RH seal
LH seaI
GT RH seal
GT LH seal
Corner block
Channel seal, front or rear
RH seal, ventilator seating
LH seal, ventilator seating
GT seal, ventilator seating
Glass, clear
Glass, tinted
GT RH glass, clear
GT LH glass, clear
GT RH glass, tinted
GT LH glass, tinted
RH top pivot
LH top pivot
RH lower pivot
LH lower pivot
RH top pivot, GT
LH top pivot, GT
RH lower pivot, GT
LH lower pivot, GT
Rivet, top pivot
Screw, lower pivot
Screw, cap
Screw, bracket
Screw, frame
Screw
Washer, spring
Rivet
Nut, ventilator mounting
Washer, spring
Reinforcement plate, rear
Reinforcement plate, front
Adjusting plate
Nut
Washer, spring
Washer, plain
Packing, ventilator to door
Seal, glass fixing (Before using this special seal wet the seal with
thinner n° 186.060, the rubber will be very soft and transformable)
RH inner frame
LH inner frame
RH inner frame, GT
LH inner frame, GT
RH capping, outer frame
LH capping, outer frame
RH capping, outer frame, GT
LH cappin~, outer frame, GT
RH channe , drain
LH channel, drain
RH channel, drain, GT
LH channel, drain, GT
2 0 0 5
140.273
162.312 chrome plated screw • 161.047 nylock nut
DESCRIPTION
B & C
Part nr.
Stainless steel fixing plate
ILL N°
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
Chrome plated badge bar with lamp brackets
PART N°
QTY DESCRIPTION
133.207
133.202
133.160
133.627
133.159
163.010
171.013
161.061
133.157
133.158
133.437
133.438
133.156
133.513
164.037
172.204
133.628
133.629
133.630
133.631
133.632
133.633
133.634
133.635
162.507
134.034
134.035
162.058
163.029
120.016
120.017
120.047
120.048
120.018
120.019
120.049
120.050
121.061
134.033
132.350
132.351
162.076
164.012
163.011
133.636
163.008
164.002
161.008
133.265
133.266
133.267
162.312
164.015
133.264
133.113
133.111
133.112
133.637
133.638
172.069
162.145
2
2
2
2
2
4
2
2
1
1
1
1
2
2
2
2
2/1
2/1
1
1
2/1
2/1
1
1
2
1
1
2
2
1
1
1
1
1
1
1
1
2
2
1
1
14
14
14
2
2
2
1
2
2
2
2
2
2
2
1
1
1
1
8
8
Repair screw, on 2 hole plate
Repair screw, on 1 hole plate
Pivot for Roadsters
Pivot for GT
Distance piece
Washer, plain
Spring
Nut
RH HANDLE, CURVED (A)
LH handle, curved (A)
RH handle, flat (B)
LH handle, flat (B)
Bracket for curved handle (A)
Bracket for flat handle (B)
Washer, waved
Pin
RH bracket (2 screw fixing type) 2 for Roadster, 1 for GT
LH bracket (2 screw fixing type) 2 for Roadster, 1 for GT
RH bracket, GT only (early type)
LH bracket, GT only (early type)
RH bracket, 2 for Roadster, 1 for GT
LH bracket, 2 for Roadster, 1 for GT
RH bracket, GT only
LH bracket, GT only
Set of 10 screws, nuts, washers & spring washers
RH rear channel
LH rear channel
Screw
Washer, countersunk
RH door glass, clear
LH door glass, clear
RH door glass, tinted
LH door glass, tinted
RH door glass, GT, clear
LH door glass, GT, clear
RH door glass, GT, tinted
LH door glass, GT, tinted
Seal, glass to channel
Lower channel
RH window regulator
LH window regulator
Screw
Washer, spring
Washer, plain
Stop, regulator arm
Washer, plain
Washer, spring
Nut
Handle, window regulator
Washer, fibre
Screw, spring washer & escutcheon
Screw
Washer, spring
Escutcheon, chrome
Buffer, felt
RH bracket, glass stop (Roadster)
LH bracket, glass stop (Roadster)
RH bracket, glass stop (GT)
LH bracket, glass stop (GT)
Nut, spire
Screw
71
Bumpers and grill
72
©
V a n
G e s t e l
B & C
2 0 0 5
Bumpers and grill
ILL N° PART N°
QTY DESCRIPTION
1 140.028 1
2 140.029 1
140.030 1
3 133.650 1
4 140.031 1
5 140.032 2
6 133.649 1
7 140.033 1
8 133.651 1
9 133.080 1
10 164.012 2
11 161.019 2
12 141.042 1
13 132.097 2
14 133.070 10
15 162.124 2
16 164.006 2
17 163.023 2
18 161.045 2
19 164.011 2
20 163.031 4
21 162.067 6
22 163.014 6
23 164.006 6
24 161.026 6
25 132.098 2
26 133.177 1
28 133.078 2
29 122.007 2
30 163.032 2
31 164.006 2
32 162.211 2
33 161.026 4
©
V a n
G e s t e l
Rear bumper
RH over rider, rear
LH over rider, rear
Complete bolting kit, rear bumper to bumper brackets, number plate fixing & bumper fillers with fixing screws
Front bumper
Front over rider
Complete bolting kit, front bumper to bumper brackets. Included are all
bolts, nuts, brackets, washers, spacers and also the brackets and screws
for the number plate fixing
Chrome grill assembly
Complete screw kit, grill fixing
Set of 3 brackets
Washer, spring
Nut
Bumper filler pair
Spring bar, rear
Washer, spacer
Bolt
Washer, spring
Washer, plain
Nut
Washer, spring
Washer, plain
Chrome bolt, washers & nut
Washer, plain
Washer, spring
Nut
Bracket, bumper
Bolting kit, rear bumper brackets to chassis
Brackets
Rubber spaces
Washer, plain
Washer, spring
Bolt
Nut
B & C
2 0 0 5
ILL N° PART N°
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
164.006
163.014
162.124
132.099
132.100
133.082
132.046
132.927
133.079
162.123
163.011
164.012
161.019
162.125
164.012
161.019
121.008
162.060
163.013
164.015
161.024
162.126
122.009
162.029
164.012
163.011
133.652
141.043
141.044
172.031
162.061
132.096
132.928
122.008
162.123
168.029
163.011
QTY DESCRIPTION
4
4
2
1
1
1
1
1
2
2
2
2
2
2
2
2
1
3
3
3
3
3
2
3
3
3
2
1
1
6
6
1
1
2
2
4
2
Washer, spring
Washer, plain
Bolt
RH bracket
LH bracket
Bolting set, front brackets to chassis
Number plate
Number plate, stainless steel
Brackets
Screw
Washer, plain
Washer, spring
Nut
Screw
Washer, spring
Nut
Moulding
Screw, pan pozi
Washer, plain
Washer, spring
Nut
Screw, grill to brackets
Buffer, grill to bonnet
Screw, grill to radiator duct
Washer, spring
Washer, plain
Towing eye bracket
Centre piece only
Badge grill
Clip
Screw
Number plate rear
Number plate rear, stainless steel
Buffer, number plate
Screw
Washer, packing
Washer, plain
73
Windscreen
74
©
V a n
G e s t e l
B & C
2 0 0 5
Windscreen
Part nr.
141.288
Late type, dipping
2 screw fix
Part nr.
141.071
Clamp type mirror
gold painted back
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
©
QT
120.002 1
120.003 1
121.018 1
121.019 1
121.020 1
121.021 1
121.022 2
140.021 2
134.152 2
152 …
8
162 …
4
141.017 1
162.531 4
162.532 2
162.533 4
162.534 4
133.641 2
133.642 1
133.643 1
141.379 1
141.380 1
133.644 1
162.535 2
164.042 2
163.076 2
162.103 4
164.006 4
163.014 2
163.026 2
133.645 1
141.020 A/R
141.019 2
133.646 2
133.647 1
133.648 1
152.014 1
152.019 1
141.381 1
133.417 1
141.016 2
131.416 1
131.417 1
131.418 1
131.419 1
V a n
G e s t e l
DESCRIPTION
LL N° PART N°
Windscreen glass, clear
Windscreen glass, tinted
Glazing seal
Seal, windscreen frame to body
RH pillar seal
LH pillar seal
Seal, pillar side
Seal retainer, into seal
Seal retainer on pillar side
Rivet
Screw
Screw set, windscreen frame (nO 1 1>14)
Top screws, short, chrome
Top screws, long, chrome
Bottom, side screw, zinc plated
Bottom screw, zinc plated
Tapping plate, top
Tapping plate, bottom, RH
Tapping plate, bottom, LH
Bracket centre rod, bottom, European
Bracket centre rod, bottom, US
Tapping plate
Chrome plated H.T. screws, with point
Washer spring, chrome plated
Washer plain, chrome plated
Bolt, frame to body
Washer, spring
Washer, plain
Washer, plain, ‘D’ outer
Bolting kit, frame to body (included illustration numbers 19to 25)
PACKING
Spacer bloc, alluminium
Spacer block, plastic (not original but an alternative product)
RH, ‘A’ post windscreen leg cover
LH, ‘A’ post windscreen leg cover
Rivet (set of 10 pieces)
Fastener, stud (set of 10 pieces)
Bracket, centre rod top, European
Bracket, centre rod top & mirror fixing, US
Bracket, hood clamps
Windscreen assembly, European, clear glass
Windscreen assembly, European, tinted glass
Windscreen assembly, US, clear glass
Windscreen assembly, US, tinted glass
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
B & C
2 0 0 5
140.017
134.153
140.018
140.019
140.020
134.154
150.344
150.345
150.346
150.347
122.075
152.086
152.089
133.499
164.017
163.066
161.047
141.071
140.016
161.040
161.024
141.342
161.276
141.288
162.049
150.348
150.349
150.350
133.500
133.501
162.338
162.049
141.343
141.344
133.502
162.427
133.503
133.504
133.505
133.506
141.345
QT
DESCRIPTION
1
1
1
1
1
1
1
1
1
1
2
4
4
2
2
2
2
1
1
1
1
1
1
1
2
2
1
1
1
1
2
2
1
1
1
3
1
1
1
1
1
Top rail, early (European)
Top rail, late (US)
RH pillar
LH pillar
Bottom rail, European
Bottom rail, US
Pair sun visors, LHD
RH sun visor with mirror
LH sun visor
Sun visor kit, complete
Rubber block, sun visor
Rivet, short
Rivet, long
Pivot bracket
Double spring washer
Cup washer
Self locking nut
Mirror, rear view
Chrome centre bar (Thread on top side only)
Dome nut, chrome plated
Lock nut
Chrome centre bar (Thread on both sides)
Bottom nipple
Interior mirror (dipping)
Screw, mirror fixing
GT sun visor, grey, ‘65-’76
GT sun visor, grey & black, ‘76-’80 drivers side (LHD)
GT sun visor, grey & black, ‘76-’80 passenger side (LHD) with mirror
GT retainer (European type)
GT retainer (USA type)
Screw
Screw
GT mirror, rear view
GT mirror arm
Buffer
Screw
Cover
Arm
Sucker stem
Base
GT mirror, dipping
75
Windscreen washer components & mirrors
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
QTY DESCRIPTION
083.047 2
083.060 1
083.055 1
083.058 A/R
083.046 1
083.294 1
083.553 1
083.554 1
083.049 1
083.054 1
083.050 1
083.061 1
76
Water Jet, Roadster
Water Jets, GT
Tubing set
Rubber strap
Pump
Pump, electric
Original type, water container
Strap, for original container
Cap
Valve, non return
MGB container
Bracket
ILL N° PART N°
QTY DESCRIPTION
13 083.314 1
14 083.056 1
15 083.555 1
16 083.057 1
17 141.192 1
18 141.070 2
19 141.011 1
1
141.012 1
1
Cap and non return valve
‘T’ piece
‘T’ piece with non return valve
Non return valve, in line
Mirror, no drilling holes, clamps on
quarter lights
Racing mirror
RH wing mirror
LH door mirror
LH wing mirror
RH door mirror
ILL N° PART N°
20
21
22
23
24
25
141.116
141.117
141.112
141.113
141.114
141.115
141. 122
141. 123
141.124
141.125
141.069
©
QTY DESCRIPTION
2
2
1
1
1
1
1
1
2
2
2
V a n
RH or LH mirror arm, on spring
Round mirror
RH door mirror, chrome
LH door mirror, chrome
RH door mirror, black
LH door mirror, black
RH mirror arm, on spring
LH mirror arm, on spring
Straight arm
Mirror
Wing mirror
G e s t e l
B & C
2 0 0 5
Seats
ILL N° PART N°
QTY DESCRIPTION
2 156.001 1
156.002 1
156.003 1
156.004 1
156.064 1
3 NA
2
4 NA
2
5 NA
4
6 133.253 4
7 133.254 4
8 141.146 2
9 162.307 2
10 133.255 2
11 152.032 A/R
12 132.175 1
132.176 1
132.177 2
131.198 1
131.199 1
13 153.058 2
©
V a n
G e s t e l
Pair seat covers,
black leather with white piping
Pair seat covers,
black leather with red piping
Pair seat covers,
red leather with white piping
Pair seat covers,
red leather with black piping
Pair seat cover kit,
black leather with black piping for with or without headrests (1969)
Head rest assembly, black leather
Head rest cover, black leather
Sleeve-finishing
Bush-friction
Retaining clip
Rake adjusting handle
Screw, rake adjusting
Tilt knob handle
Clip, seat cover to frame
RH seat frame (1967-’68)
LH seat frame (1967-’68)
Squab frame (1967-’68)
RH, frame pair (1969)
LH, frame pair (1969)
Seat diaphragm
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
14 152.041 16
15 157.005 1
157.006 1
157.011 1
157.012 1
16 157.007 2
157.013 2
17 132.178 2
132.181 2
18 132.179 1
19 132.180 1
20 162.303 16
21 163 … 16
22 161.012 16
23 134.039 4
24 134.040 4
25 162.065 8
26 163.040 8
28 156.053 1
156.054 1
156.055 1
Hook, seat diaphragm to frame
RH seat base foam (1967-’68)
LH seat base foam (1967-’68)
RH seat foam (1969)
LH seat foam (1 969)
Squab foam (1967-’68)
Squab foam (1969)
Squab hardboard (1967-’68)
Squab hardboard
KIT - RH + LH seat rails & runners
KIT - all fasteners for slides to
frames and runners to floor
Screw, slide to frame
Washer, plain
Nut, self locking
Floor runner
Wooden spacer, under rail
Screw, floor runner to floor
Spacer, floor runner to floor
Rear seat cover, black leather
with white piping (1967-’68)
Rear seat cover, black leather
with red piping (1967-’68)
Rear seat cover, red leather
with white piping (1967-’68)
ILL N° PART N°
QTY DESCRIPTION
156.056 1
156.009 1
156.010 1
156.011 1
156.012 1
156.065 1
156.066 1
29 152.009 4
30 162.102 8
31 133.174 3
32 164.015 12
33 162.060 12
34 133.175 2
35 162.047 4
36 164.015 4
37 161.042 4
38 133.176 2
39 162.163 4
40 163.007 4
Rear seat cover, red leather
with black piping (1967-’68)
Rear seat cover, black vinyl
with white piping (1967-’68)
Rear seat cover, black vinyl
with red piping (1967-’68)
Rear seat cover, red vinyl
with white piping (1967-’68)
Rear seat cover, red vinyl
with black piping (1967-’68)
Rear seat cover kit, black leather with black piping (1969)
Rear seat cover kit, black vinyl
with black piping (1969)
Two screw base fastener
Screw
Hinge, squab to floor
Washer, spring
Screw
Catch
Screw
Washer, spring
Chrome dome nut
Staple securing
Screw
Washer
77
Trim
ILL N° PART N°
QTY DESCRIPTION
1 150.181 1
2 150.048 1
3 152.047 8
4 150.182 1
5 150.183 1
6 133.269 1
7 162.162 4
8 163.039 4
9 150.153 1
10 133.172 1
11 133.173 1
12 163.034 4
13 164.023 4
14 161.054 4
15 133.270 1
16 083.063 1
78
Dashtop recovering kit
Crash roll assembly (includes Ill. N°3)
Fasteners
Crash roll recovering kit, included
foam, vinyl and piping
Panel behind radio conzoll, black
Conzoll radio speaker, European
Screw
Cup washer
Wooden panel behind panel speaker
Grill, radio speaker
Bezel, grill (included nuts & washers)
Washer, plain
Washer, spring
Nut
Conzoll radio, U.S.
Radio hole banking kit
ILL N° PART N°
QTY DESCRIPTION
17 083.148 1
18 140.046 1
19 162.311 1
20 133.149 2
21 162.157 2
22 150.041 1
150.042 1
150.043 1
150.044 1
150.045 1
Map lamp assembly
Alloy Moulding, cockpit rear
(not trimed)
Fastener kit, rear moulding (36 pieces)
End plates
Screw
Rear cockpit rail cover kit, black
with black piping
Rear cockpit rail cover kit, black
with white piping
Rear cockpit rail cover kit, black
with red piping
Rear cockpit rail cover kit, red with
white piping
Rear cockpit rail cover kit, red with
black piping
ILL N° PART N°
QTY DESCRIPTION
23 141.067 1
24 185.035 1
25 185.034 1
26 150.206 1
150.207 1
27 121.100 1
28 141.149 1
29 162.313 1
162.204 3
30 187.010 1
©
Ash tray
Leather covered gear lever knob
Wooden gear lever knob
Leather gear lever gaiter
Vinyl gear lever gaiter
Grommet, gear lever
Chrome rim, gaiter retainer
Chrome countersunk raised head
POZI screw
Chrome countersunk raised head
POZI screw
Glue spray
V a n
G e s t e l
B & C
2 0 0 5
Trim panels
ILL N° PART N° QTY DESCRIPTION
ILL N° PART N° QTY DESCRIPTION
ILL N° PART N° QTY DESCRIPTION
1 150.036 1
150.185 1
150.037 1
150.186 1
2 150.029 2
3 141.025 1
141.147 1
4 162.155 1
5 151.613 1
151.614 1
151.615 1
251.092 1
251.093 1
151.617 1
151.618 1
151.619 1
251.094 1
251.095 1
6 151.030 1
151.031 1
7 151.156 1
151.157 1
151.158 1
151.159 1
151.160 1
8 151.161 1
151.162 1
151.163 1
151.164 1
151.165 1
151.166 1
151. 167 1
151.168 1
151. 169 1
151.170 1
9 162.156 1
10 150.038 1
150.039 1
150.040 1
11 141.045 1
12 162.309 1
13 151.052 1
151.053 1
14 162.310 1
15 141.143 1
141.144 1
16 133.268 2
17 141. 145 4
18 133.265 2
19 133.266 2
20 133.267 2
21 141.047 2
22 162.142 4
23 150.195 1
150.196 1
24 162.172 1
25 151.137 1
26 172.138 A/R
27 172.139 A/R
28 151.139 1
29 150.023 2
150.022 2
150.024 2
30 150.205 2
31 162.061 12
32 132.184 2
33 185.042 2
34 150.026 2
150.025 2
150.027 1
150.028 1
35 151.140 1
151.141 1
36 151. 145 1
37 172.138 A/R
38 172.139 A/R
39 150.200 1
150.201 1
40 141.148 1
©
V a n
Pair MGC roadster, door cappings, black
Pair MGC GT, door cappings, black
Pair MGC roadster, door cappings red
Pair MGC GT, door cappings, red
Inner weather strip (cut to required length)
Set of 4 door capping finishers, MGC
Set of 4 door capping finishers, MGC GT
Set of 1 6 screws
Panel kit, MGC, black & black piping
Panel kit, MGC, black & white piping
Panel kit, MGC, black & red piping
Panel kit, MGC, red & white piping
Panel kit, MGC, red & black piping
Panel kit, MGC GT, black & black piping
Panel kit, MGC GT, black & white piping
Panel kit, MGC GT, black & red piping
Panel kit, MGC GT, red & white piping
Panel kit, MGC GT, red & black piping
Pair kick panels, black
Pair kick panels, red
Pair door panels, black with black piping
Pair door panels, black with white piping
Pair door panels, black with red piping
Pair door panels, red with white piping
Pair door panels, red with black piping
Pair rear quarter panels, MGC,
black with black piping
Pair rear quarter panels, MGC
black with white piping
Pair rear quarter panels, MGC,
black with red piping
G e s t e l
B & C
2 0 0 5
Pair rear quarter panels, MGC, red
with white piping
Pair rear quarter panels, MGC, red
with black piping
Pair rear quarter panels, MGC GT,
black with black piping
Pair rear quarter panels, MGC GT,
black with white piping
Pair rear quarter panels, MGC GT,
black with red piping
Pair rear quarter panels, MGC GT,
red with white piping
Pair rear quarter panels, MGC GT,
red with black piping
Screw & cup washer set (50 pieces)
Door seal, for 2 sides, black velour + rubber
Door seal, for 2 sides, red velour + rubber
Door seal, for 2 sides, black PVC + rubber
Set of 4, door seal finishers
Fastener kit, finishers to body
Rear bulkhead panel, black
Rear bulkhead panel, red
Fastener kit, rear bulkhead
RH, inside release
LH, inside release
Connectors
Bezel, inside release to panel
Handle, window regulator
Washer, fibre
Screw, spring washer and escutheon set
Pull, door handle
Screw
Pair GT rear eappings, black
Pair GT rear cappings, red
Screw and cup washer set for rear
cappings and rear panels
Pair grey C post panels
Panel clips
Plugner cup, for clip
Pair A post finishers
Door seal, black velour + rubber
Door seal, red velour + rubber
Door seal, black PYC + rubber
Strip, retaining seal
Screws
Alluminium door steps (original)
Stainless steel doorstep with MG logo
Rear side seal, black velour + rubber
Rear side seal, red velour + rubber
RH, rear side seal, black PVC + rubber
LH, rear side seal, black PVC + rubber
Pair tailgate panels, black
Pair tailgate panels, red
Headlining kit, grey
Clip
Clip plugner
Map pocket, black
Map pocket, red
Finisher, map pocket
79
Carpet sets
Our carpet sets are carefully made from tufted car carpeting for perfect fitting. The tunnel is premoulded and insulated
together with all the floor mats. To improve insulation from noise and engine heat, you can put more felt under the floor
mats. All fasteners are included for installation, not only the fasteners on the carpets but also fasteners on floor.
ILL N° PART N°
1 151.666
151.667
2 150.210
3 150.200
4 141.148
5 162.813
6 163.184
7 151.254
7 151.255
151.374
151.375
80
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
MAIN CARPET SET, BLACK
MAIN CARPET SET, RED
Rubber foot rest, LH side of the tunnel
Map pocket, black
Finisher, map pocket
screw
black cup washer
Spare wheel cover, black
Spare wheel cover, Red
8
Pair of foot mats, black carpet
Pair of foot mats, red carpet
ILL N° PART N°
9
10
11
12
13
14
15
16
17
QTY DESCRIPTION
152.152 A/R
152.153 A/R
152.019 2
152.035 A/R
152.087 A/R
151.235 1
151.016 1
151.017 1
121.038 2
187.011 A/R
187.009 A/R
Ring, carpet fastener
Socket, carpet fastener
Set of 10 fasteners, male on floor
Fasteners, male on floor
Rivet
Boot carpet set, black
GT extra’s, black
GT extra’s, red
Heel mat with MG logo
Glue, tube
Glue for carpet, insulation felt etc.
ILL N° PART N°
QTY DESCRIPTION
18 187.010 A/R
19 153.056 1
20 151.122 A/R
151.123 A/R
21 151.097 A/R
22 190.229 1
©
Glue spray
Tool and jack bag
One square meter black carpet
One square meter red carpet
One square meter insulation felt
MGB interiors, fitting instructions.
This book will show you how to
recover your seats, fit new carpets, recover the cockpit rail, all panels
and door trim.
V a n
G e s t e l
B & C
2 0 0 5
Hoods and soft tops
ILL N° PART N°
QTY DESCRIPTION
1 153.014 1
HOODS ONLY
2 153.015 1
153.018 1
153.305 1
153.016 2
153.017 1
153.019 1
3 152.015 2
4 152.016 2
5 152.034 1
6 153.055 2
7 163.024 4
©
V a n
G e s t e l
Hood with header rail and seal for
“Grey folding frame type” made
from black PVC
Hood only, black PVC
Hood only, black Canvas
Hood only, black Mohair
Hood only, white PVC
Hood only, beige PVC
Hood only, beige Mohair
Back plate
Tongue
Rivet (set of 10)
Hood strap
Washer, cup
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
8 162.100 4
9 152.074 1
10 161.024 8
11 152.034 A/R
12 152.035 2
13 152.023 2
14 152.015 2
15 134.094 1
16 134.095 1
17 133.298 2
18 162.101 4
19 142.001 2
20 162.051 4
21 164.015 4
Screw
Kit, hood fasteners on body
Nut
Rivet (set of 10)
Stud, tonneau cover to body
Socket, stainless steel
plate under socket, polished
stainless steel
Back bar, hood
Header rail
Pad, header rail
Screw
Hood catch
Screw
Washer
ILL N° PART N°
22
23
24
25
26
27
28
29
30
31
32
33
37
38
QTY DESCRIPTION
134.007 1 Seal retainer
152.034 A/R Rivet (set of 10)
121.017 1 Seal, header rail
142.003 2 Socket, chrome plated
152.005 2 Plate hood retaining
152.056 2 Fixing kit, retainer to body
152.022 8 Fastener, hood to body
187.068 1 Spray, frame paint, grey
155.004 1 Folding frame, grey
152.075 1 Kit, frame to body
152.072 1 Set of 6 studs and rivets
152.076 1 Kit, header rail to frame
164.015 8 Washer, spring
085.052 1 Hood label
81
Tonneau covers and luggage racks
TONNEAU COVERS There are two important things to remember when ordering tonneau covers. First, our tonneau covers listed below are FOR LEFT
HAND DRIVE CARS ONLY. Secondly, there are TWO LENGHTS. When a metal dashboard is fitted, the studs placed at the front are 11 cm from the
windscreen frame and when a foam padded fascia is fitted, the central front stud is more at the front; 5 cm from the windscreen frame. To avoid
mistakes, please measure the overall lenght (A): 141 cm or 150 cm
IIL N° PART N°
1
2
QTY DESCRIPTION
TONNEAU COVERS
153.025 1 Black PVC, A= 141 cm
153.308 1 Black Mohair, A= 141 cm
153.026 1 White PVC, A= 141 cm
153.027 1 Beige PVC, A= 141 cm
153.029 1 Beige Mohair, A= 141 cm
153.045 1 Black PVC, A= 150 cm
153.309 1 Black Mohair, A= 150 cm
153.046 1 White PVC, A= 150 cm
153.049 1 Beige Mohair, A= 150 cm
HOOD COVERS
150.116 1 From black PVC
150.119 1 From black Canvas
150.316 1 From black Mohair
150.117 1 From white PVC
150.118 1 From beige PVC
150.120 1 From beige Mohair
82
IIL N° PART N° QTY
3 152.015 2
4 152.016 2
5 152.042 1
6 134.008 1
7 134.009 1
8 153.030 1
9 150.296 1
10 185.019 1
11 200.419 1
12 152.009 A/R
13 162.102 A/R
14 152.022 A/R
15 163.013 A/R
16 164.015 A/R
17 161.024 A/R
18 152.030 A/R
DESCRIPTION
Back plate
Tongue
Rivet (set of 10)
RH rail for cover
LH rail for cover
Stowage bag for cover rails
Bag for tonneau cover, hood cover
Punch & bed kit
(for fasteners n° 27,28)
Revolving punch pliers
Stud, two screw base
Screw
Stud
Washer, plain
Washer, spring
Nut
‘Lift the dot’ fastener
IIL N° PART N° QTY
19 152.031 A/R
20 152.019 A/R
21 152.020 A/R
22 152.017 A/R
23 152.018 A/R
24 152.108 A/R
25 185.021 2
26 185.015 2
27 140.051 1
28 162.166 6
29 163.008 6
30 164.002 6
31 161.002 6
32 140.066 1
©
V a n
DESCRIPTION
Plate, fastener locking
Base (set of 10)
Bottom fastener (set of 10)
Top cap (set of 10)
Socket (set of 10)
Base on tube, one
Safety belt, European approved
Safety belt, European approved,
automatic retractor all positions
Original type luggage rack,
included all fittings
Chrome screw, pan pozi head
Washer, plain
Washer, spring
Nut
Universal boot rack. Alluminium
frame with wooden slats.
Easy fitting, no drilling holes
G e s t e l
B & C
2 0 0 5
Hard top
ILL N° PART N°
2
3
4
5
6
7
8
9
10
11
12
13
14
15
©
QTY DESCRIPTION
155.006 1
155.007 1
152.040 A/R
134.029 1
140.034 1
140.035 1
121.047 2
121.048 1
140.037 1
140.036 1
152.040 A/R
133.123 2
163.010 4
164.012 4
162.029 4
121.049 2
163.037 4
162.152 4
V a n
G e s t e l
HARD TOP ORIGINAL
HARD TOP REPLICA
Rivet
Retainer, center seal
Retainer, RH rear seal
Retainer, LH rear seal
Insert, seal
Seal, hard top to body
LH moulding
RH moulding
Rivet
Location, rear
Washer, plain
Washer, spring
Screw
Seal, door top
Washer, cup
Screw, door seal end
B & C
2 0 0 5
ILL N° PART N°
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
162.060
164.015
133.124
162.020
163.001
133.125
162.648
103.010
164.012
162.029
133.126
121.050
121.051
120.011
162.148
140.038
140.039
QTY DESCRIPTION
2
2
2
2
2
2
2
2
2
2
2
1
1
1
8
1
1
Screw
Washer, spring
Clip
Screw
Washer, plain
Bracket, side of hard top
Washer, plain
Washer, plain
Washer, spring
Screw, locating to hood socket
Bracket, side locating
Strip, finisher
Rubber, back light
Glass, rear
Screw, window finisher
RH finisher window
LH finisher window
ILL N° PART N°
32
33
34
35
36
37
38
39
40
41
42
QTY DESCRIPTION
162.149 8
140.040 1
140.041 1
133.127 2
133.128 2
133.129 2
120.012 2
121.052 2
140.042 1
140.043 1
162.150 24
162.151 12
140.044 1
140.045 1
121.053 1
121.054 1
Screw, window to hard top
RH, top rail
LH, top rail
Bracket, top corner
Bracket, rear corner
Bracket, front corner
Glass
Glazing rubbers
RH front rail
LH front rail
Screw (6.35 mm)
Screw (12.70 mm)
RH bottom rail
LH bottom rail
RH bottom seal
LH bottom seal
83
GT specials
ILL N° PART N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
121.039
120.004
120.005
121.044
134.011
134.012
134.013
134.014
133.074
133.075
121.040
120.009
120.010
121.044
140.022
140.023
133.076
141.366
140.024
140.025
84
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Front glazing, rubber
Front screen, clear
Front screen, tinted
Filler rubber
Top finisher
Bottom finisher
RH finisher
LH finisher
Corner finisher, top
Corner finisher, bottom
Rear glazing, rubber
Rear screen, clear & heated
Rear screen, tinted & heated
Filler, rubber
RH finisher
LH finisher
Finisher, clip
MGC GT letterset
RH front finisher
LH front finisher
ILL N° PART N°
17
18
19
20
21
22
23
24
25
26
27
140.026
140.027
133.077
134.015
134.016
134.019
134.020
134.017
134.018
134.032
121.055
121.032
141.056
141.057
141.058
150.022
150.023
150.024
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RH rear finisher
LH rear finisher
Finisher clip
RH ‘B’ post finisher
LH ‘B’ post finisher
RH rear bottom finisher
LH rear bottom finisher
RH door finisher
LH door finisher
Seal retainer
Rubber boot lid-outer
Rubber boot lid-inner
RH stay assembly
LH stay assembly
Cover
Red door seal (velour)
Black door seal (velour)
Black door seal (plastic)
ILL N° PART N°
28
29
30
31
32
33
34
35
36
37
150.025
150.026
150.027
150.028
131.096
131.097
133.147
133.148
141.059
141.060
121.056
120.013
120.014
141.061
141.062
152.042
152.043
122.025
©
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
V a n
Red side seal (velour)
Black side seal (velour)
RH black seal (plastic)
LH black seal (plastic)
RH quarter light ass.
LH quarter light ass.
RH frame hinge
LH frame hinge
RH catch toggle
LH catch toggle
Rubber, glazing
RH glass, clear
LH glass, clear
RH ‘A’ post finisher
LH ‘A’ post finisher
Large cap cover
Small cap cover
Blanking grommet
G e s t e l
B & C
2 0 0 5
Grommets and blanking plugs
ILL N° PART N°
QTY DESCRIPTION
1 122.062 2
2 122.031 1
3 121.646 1
4 122.291 1
5 122.016 2
6 122.005 2
7 122.004 1
8 122.003 1
9 083.097 1
10 122.002 1
11 122.002 1
12 122.004 1
122.004 1
13 122.006 1
14 122.004 1
122.004 1
15 122.002 1
16 122.005 2
18 122.032 4
©
V a n
G e s t e l
APPLICATION
Blanking rubber, brake and clutch master cylinder
Plug, gearbox dip stick hole
Grommet kit for bulkhead
Grommet, main wiring loom through bulkhead
Grommet, headlamp wiring loom
Grommet, door switch wiring loom
Grommet, windscreen washer tubing
Grommet, choke cable
Grommet, pipe oil pressure
Grommet, capillair water temperature meter
Grommet, heater valve cable
Grommet, speedo meter cable
Grommet, tacho cable
Grommet, tail loom through boot floor
Grommet, vent hose fuel side of the fuel pump
Grommet, vent hose contact breaker side
of the fuel pump
Grommet, wiring loom to tank unit
Grommet, wiring loom number plate lamps
Blanking plug, clear plastic, fitted
into the front of the door
B & C
2 0 0 5
ILL N° PART N°
QTY DESCRIPTION
19 122.032 8
20 122.215 2
122.030 2
21 122.243 2
22 122.241 1
23 122.215 1
122.030 1
27 122.035 4
28 133.179 4
29 164.012 8
30 161.019 8
31 122.034 1
32 133.178 1
33 162.005 2
34 164.002 2
Blanking plug, clear plastic, fitted
into the floor panels
Blanking plug, black rubber, rear shock absorber filling hole
Blanking plug, clear plastic, rear shock absorber hole
Blanking plug, clear plastic, fitted
on the rear side of the boot floor
Blanking plug, black rubber, fitted on
de left side of the boot floor
Blanking plug, black plastic, steering column hole
Blanking plug, clear plastic, steering column hole
Cable cross rubber
Bracket
Washer, spring
Nut
Cable cross rubber
Bracket
Screw
Washer, spring
APPLICATION
Nov 1967 on
Up to Nov 1967
Nov 1967 on
Up to Nov 1967 Nov 1967 on
85
Weber carburettors and accessories
106.077 Weber
Part nr.
inlet manifold kit
Including linkage
This quality manifold kit comes complete with 3 inlet
manifolds made from cast aluminium and all linkage
parts. Here to the left you can see a complete set-up on
an MGC including Weber carburettors and K&N airfilters
(ask your Anglo Parts shop for more info on K&N filters).
See below for other parts, quantities marked in red are
for a complete set-up
Part nr.
101.340
Preset fuel pipe set
• Aeroquip made for your triple Webers
• Easy to install
Part nr.
106.001
One Weber
45 DCOE
carburettor
assembly
Part nr.
For maximum power, we recommend that you set up the Webers to your
& your engine’s specific requirements. Have it done by a
professional, read the specific books
(190.416 or 190.428)
(order 3 Webers!)
Part nr.
106.008
Rampipe 45
To be used with the K&N air filters
(order 6 pieces)
Part nr.
Part nr.
106.004
106.003
Part nr.
106.002 Gasket,
sealing ring on plate
106.086
(order per 3 )
Sock
type high
performance
filters for Webers
Cup washer
(order per 24)
(order per 12)
Part nr.
190.416
Speedpro
series, Weber
& Dellorto
DCOE & DHLA
Carburettors, the
sidedraft carburettors,
how to build, power tune,
strip and rebuild. How to
get the right set up for
your engine. 112 pages
86
Grommet,
vibration
Part nr.
Part nr.
101.422
190.428
Haynes
carburettor
workshop
manual
This manual covers
Weber, Stromberg &
SU carburettors. Many
illustrations and excellent
step by step explainations.
350 pages
©
V a n
Breather hose
adaptor
For connecting the
breather hose into the
filter backplate 1/2”
Flange, 3/4” long
G e s t e l
B & C
2 0 0 5
Engine and power tuning
Part nr.
000.000
Part nr.
Formula Power lead sets
Tuning SU Carburettors
181.055
Super lead set, originally developed for race. Minimum loss
and greatly extended cable life. Spiral magnetic 4 core
10mm blue silicon extreme heat resistance.
Can also be fitted to a much more powerful
coil if needed.
Part nr.
190.225
Most mechanics and enthusiasts struggle when setting the twin SU carburettors correctly. This
book and a bit of practice will solve the problem. It is very important for your
engine that the carburettor
tuning is correct. This book
also covers all SU fuel
pumps. 189 pages
Part nr.
198.017
Form -A- Gasket nr. 1372,
200 ml gasket cement tube.
Part nr.
082.149
Modern lightweight
replacement
starters
This modern reliable starter
gives more torque with less
power drain when starting,
this makes it ideal for daily use.
They are also easier to install as they
are much lighter and smaller
Use on both sides of a gasket or direct
on the surface. Specially for high
temperatures up to 315°C.
Also useful for exhaust pipe fitting.
Part nr.
016.269
Form -A- Gasket Nr.1,
200ml gasket cement, tube
Use on both sides of the gasket
or direct on the
surface.
Part nr.
011.589
Spin-on oil filter
With relief valve
Part nr.
011.205
Spin-on oil filter conversion
Oil filter changes can be quick, clean and painless
if you have got a spin-on oil filter.
Convert now and get rid of
your messy cannister
style filter
Part nr.
024.208
Close ratio
gearkit
Straight cut for 4 synchro gearbox
©
V a n
G e s t e l
B & C
2 0 0 5
87
Engine and power tuning
Part nr.
086.401 Oil
temperature adaptor
With 1/2” BSP male/female connectors
5/8” UNF
Part nr.
185.622
Oilstat, 1/2” BSP male
5/8” UNF
BSP size 1/2” parallel thread, male O.D. = 13/16” or 20.6 mm
Part nr.
086.326 Mechanical oil
temperature gauge
Water temp in C°
Part nr.
053.295 Brake pads
Only the best of the best for your MGC! These
magnificent brake pads will fit into your standard
MGC brake callipers, but enlarging the pad area with 20%.
Part nr.
053.082 Lockheed servo
After easy installation you will achieve
maximum braking power. WARNING!
Fitting a brake servo will not
cure faulty brakes, therefor
ensure that your
braking system
is in good
working
condition.
•
•
•
•
•
no black dust
no disc damage
no warm up, instant response of cold
lasts for 15 - 32.000 KM
an ideal solution for all classics, whether
normal road or competition use.
Function The oilstats are designed to prevent flow of engine oil
through the cooler until a 80°C temerature is reached. Prolonged
use of a car engine in conditions where the oil cannot reach its correct
working temperature will cause sludge formation and crankcase oil
dilution, leading to excessive wear especially in the cylinder bores.
Optimum engine power will only be delivered at correct temperatures.
The elimination of drag in engines caused by cold oil is a most
important consideration, especially with a tuned engine.
Operation Control of the oil flow in the thermostat is effected by
a wax filled capsule, known as a “Waxstat”. The “waxstat” used is
set to direct oil through the cooler at 80°C.
Construction The bodies of the thermostats are precision die cast
aluminium units. The “Waxstat” is a mass produced proprietary unit,
subject to the most stringent quality controls.
Fitting The thermostat can be fitted in any convenient place where
the oil pipes run parallel. This is a more professional version that
requires that the pipes have 1/2 BSP female connections. The weight
of the thermostats are such that the hoses will support them without
sagging, however a bracket is supplied with the slightly heavier
185.622 if further restraint is desired.
Part nr.
050.306
Grooved Discs
Improve your braking greatly with
these modern treated brake discs.
Part nr.
Kenlowe
Cooling fan kit
185.128
If your MGC suffers from overheating in modern
traffic during high summer ambient we recommend
the Kenlowe is used in
addition to the engine
fan to provide extra cooling.
Mounting
The standard specification includes adjustable body/chassis mountings to secure the fan adjacent to but not connected to the radiator - totally adjustable and
therefore suitable for almost every vehicle. A no-cost option is direct radiator fitting incorporating moulded mountings that extend beyond the fan to provide a
simple secure four point mounting without drilling, or use of spanners. (not recommended for aluminium core radiators).
Automatic Control
Adjustable between 45 deg. C° and 120 deg. C° with 3 deg. C° differential. Advanced heavy-duty design allows continious on/off switching without a relay. A
Simple sensor entry using patented silicone extruded rubber seal for capillary provides watertight entry without cutting hose or drilling radiator - see diagram.
88
©
V a n
G e s t e l
B & C
2 0 0 5
Suspension and Superflex bushes
FRONT SUSPENSION
Ill. n° Partn°
9
3
6
8
1
4
3
7
2
• Easy to fit • Durable
• Oil resistant • Self lubricating
• Improved location • Long life
• Tough • 2-Year road warranty
• Non-perishing • Stainless
steel sleeved (where aplicable)
Fitting info
1
2
3
4
5
6
7
8
9
041.511*
048.166*
048.161*
048.162*
048.163
048.164*
048.165
041.507
041.922
Description
Qty
Top trunnion
Outer fulcrum
Top wishbone
Tie-bar front
Tie-bar rear
Torsion bar - bush
Anti-roll bar
Damper eye
Damper pin
REAR SUSPENSION
Ill. n° Partn°
10
11
12
Description
Qty
041.513* Spring eye 2
041.515 Spring pad 4
041.514 Spring shackle bush 8
Parts marked with * denote stainless
steel sleeve
12
All bushes will press in with the aid of a suitable vice with exception of 048.166 which may be
fitted with a void bush puller, or cut in half at the wasted centre and fit from each end.
This bush should have the large flange at the rear of the Kingpin.
11
5
10
Part nr.
041.514
Rear bush, polyurethane
Part nr.
042.640
Conversion
bracket kit
for Spax
dempers
Part nr.
041.515
Pad, spring in
polyurethane
Part nr.
185.139
Uprated
valve
for rear shock
absorber
Part nr.
042.351
Car lowering kit
©
V a n
G e s t e l
B & C
2 0 0 5
2
2
4
2
4
2
2
2
4
Part nr.
042.421
Anti-tramp kit
anti-bar kit
89
Steering wheels and quality verneer dashboards
These quality accessories
are made from strong,
finely finished solid wood.
They are a must for the
classical driver who likes
that bit of extra finesse.
Since the early fithties Moto-Lita has been
designing and manufacturing unique steering
wheels in wood and leather. Each steering wheel
is a piece of artwork built by British craftsman.
The wooden steering wheels are made from
carefully selected cross-laminated timber
which is bonded and rivetted to a high quality
hand polished alloy 3 spoke frame. They are
then handfinished with a hardwearing deep
lustre which is resistant to petrol, oil and the
elements.
Mark 3 Woodrim
185.025
185.026
185.027
185.245
185.247
33cm
35cm
38cm
33cm
35cm
Mark 3 Leather
185.155
185.156
185.157
185.246
185.248
Flat
Flat
Flat
Dish
Dish
33cm
35cm
38cm
33cm
35cm
Flat
Flat
Flat
Dish
Dish
185.082 Boss, up to 1969 European and up to
1968 USA models
185.089 Boss, for USA 1968 and 1969 models
without horn push
Please note that Motolita Steering Wheels, shown on this page, are not original equipement and may
not be legal for street use. Please check if the use of them is legal in your country or not.
High quality walnut veneer dashboards
These dashboards are made from a thin layer of walnut verneer on a sturdy backplate with a thick layer of gloss varnish.
They are made to stick on the existing dashboard without having to screw or make holes.
Applying these dashboards is easy and the finish is magnificent
Part nr.
150.895
European up to 1969
90
©
V a n
G e s t e l
B & C
2 0 0 5
Accessories, oil and body styling
Part nr.
Works type
gear knob
046.062
15” x 6”
Alloy
wheel
Part nr.
086.461
made in aluminium with a
built-in overdrive switch
Part nr.
023.365
Knob
Gear change
Part nr.
284.092
Rear fog lamp
Styled with chrome rim
Part nr.
300.137 Automatic
transmission oil
Part nr.
046.024
15” x 6”
Centre lock
alloy
wheel
Specially formulated for classic
automatic transmissions
Part nr.
300.116
Mild EP, 1 litre
An SAE 140 grade gear oil suitable for use
in bevel, worm and pre-1960 hypoid gears.
Rated GL4 this gear oil does not possess the
additive package found in later GL5 gear
oils which should not be used in veteran and
vintage vehicles as the additive packages
in these oils attack metals such as bronze,
brass and copper.
Part nr.
131.322
Sebring Rear
Valance from
fiberglass
The rear bumper must
be removed.
Part nr.
Stylish
MGC chrome plated Mesh kit
232.721
Part nr.
131.785
Sebring set of four wings
This mesh kit comes with fitting parts & instructions. Same style as
fitted on early Jaguars, Bentleys and modern day Jaguars.
Front spoiler NOT included !!!!
not included
Part nr.
Pair perspex
headlamp cowls
185.103
Part nr.
131.786
©
V a n
G e s t e l
B & C
2 0 0 5
Sebring front spoiler
Gives your lights that extra protection against
stones & debry when racing & rallying
• 133.869 - fitting kit for cowls
91
Plates, labels, stickers and patches
Part nr.
Part nr.
085.070
085.071
MGC Roadster
MGC GT
Part nr.
Part nr.
085.002
085.059
Rocker cover
Chassis plate
1966-’70
Part nr.
085.003
Rocker cover
Part nr.
085.006
Part nr.
085.005
Negative earth
Part nr.
085.007
Part nr.
085.014
Battery
warning
Part nr.
085.008
For heaterbox& motor
Part nr.
Part nr.
085.074
085.080
Girling
Triplex
laminated
Part nr.
085.011
Coopers air filter
Part nr.
085.042
Washer bottle
sticker
Part nr.
152.034
Set of 10
rivets
Part nr.
085.037
Tecalemit
Part nr.
152.110
Set of 10 screws &
nuts 6-32 UNC x 1/4”
BMC Stickers
Tire pressure label
085.085 on screen
085.086 on body
085.050 MGC
085.051 MGC GT
Part nr.
152.109
Set of 10 studs for
rocker cover plates etc.
Part nr.
085.122
MG sticker
Part nr.
185.002
92
Union Jack badge in
jewellers enamel
©
V a n
G e s t e l
B & C
2 0 0 5
Books and CD-roms
Part nr.
Part nr.
190.119
190.729
MGC owners
handbook
As supplied with all new MGC’s. With
detailed and practical information about
your MGC, such as putting up the soft
top and routine maintenance etc. All
illustrations in B&W except cover.
MG, Britain’s favourite sports car
(by Malcolm Green)
This second edition from ‘Haynes Classic makes Series’ brings the MG story right
up to date. This well-illustrated book charts all MGs from 1923 to present day. Also
concentrates on models with particularly strong interest to classic car enthusiast.
The authoritative text is supported with buying tips, impressions and data boxes.
176 pages, 150 b&w & colour illustrations. hardback.
Part nr.
190.223
Original Series
For correct and precise information on definitve factory
specifications in every detail, from chrome trim to plug leads,
there’s no better place to look than these books. Whether owner,
buyer, restorer or enthusiast, you’ll find a combination of
minutely reserched text and magnificent full-colour photographs
- all specially commissioned - to tell you what you need to know.
Hailes by magazine reviewers worldwide. The ‘Originals’ series
is the works. Size 295 x 225 mm.
Part nr.
190.320
Part nr.
190.486
Enthusiasts colour series
MG sports cars
(By John Heilig)
A full colour gallery of MG sports cars
including pre-war chummy, Midgets, Jseries, MGTA & MGTB and post-war series:
MGTC-D-F, MGA, MGB, MGC and Midget.
Also includes MGV8, MGRV8 & MGF. With
model histories, evolution, specifications and
technical notes.
The MG Collection
The post-war models
(by Richard Monk)
The MG collection is a unique record of the
post-war MG models and is the sequel to the
author’s companion book on pre-war MGs.
He has tracked down and photographed an
example of practically every model and most
of the variants, with all cars being original as
possible. From MGTC 1948 to MGF 1998. 177
pages and fully illustrated in colour.
Very handy parts &
accessories books
These two books are full of parts for
your MGC and other classic British cars.
Part nr.
MGB parts &
accessories catalogue
190.002
276 pages, more than 1000 colour photos
Part nr.
British parts, tools
and accessories catalogue
190.058
144 pages, more than 1400 colour photos
Original PC CD-rom
Technical Publications
The parts catalogue, workshop manual and driver’s handbook you need for
your classic British car! Now for the first time owners and enthusiasts have the
opportunity to effortlessly collect all these original publications for their car, on
one handy and cost-effective CD Rom!
Part n°
Description
Part n°
Description
192.001
192.002
192.003
192.004
192.005
192.006
192.007
192.008
192.009
192.010
192.011
192.012
192.013
Morris Minor, 1948-’71
Triumph TR2-3-3A, 1953-’62
Triumph TR4-4A-5-250, 1961-’68
Triumph TR6,1969-76
Triumph TR7-8, 1975-’81
Triumph Spitfire, 1962-’80
Triumph GT6, 1966-’73
Triumph Stag, 1970-’77
AH 100 & 100/6, 1953-’59
AH 3000, 1959-’68
AH Sprite & MG Midget, 1957-’64
BMC 1100 & 1300 range, 1962-’74
Special tuning data & parts, 1950-’76
192.014
192.015
192.016
192.017
192.018
192.019
192.020
192.021
192.022
192.023
192.024
192.025
MGTA, TB, TC, TD & TF, 1936-’55
MGA & twin cam, 1955-’62
MGB & MGB GT, 1962-’69
MGB & MGB GT, 1970-’74
MGB & MGB GT, 1974-’80
MGC & MGC GT, 1967-’69
MGB GT V8, ‘72-’76 & MGR V8, ‘92-’96
MG Midget & AH Sprite, 1964-’74
MG Midget 1500, 1974-’79
Mini range MKI-II, 1959-’69
Mini range MKIII-IV, 1969-’85
Mini + Cabrio, 1985-’00
Mini Derivative models, 1964-’1991
©
V a n
G e s t e l
B & C
2 0 0 5
93
How to find us!
ANGLO PARTS FAX ORDERFORM
Client n° :
Date :
Name :
Shipping address if different :
Address :
Country :
Country :
Tel/Fax :
Model :
E-mail :
Engine n° :
Year :
Chassis n° :
Quantity
Part n°
Page n°
Illustr. n°
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
To be shipped
Payment :
Will be collected
Visa
Backorders, parts not in stock or available at this moment/ required
or not
Euro-card - Master card - Access
Card n°. :
Exp. date :
badge code :
Signature :
Fax numbers
BELGIUM Fax +32 15 42 34 45 • HOLLAND, VEENENDAAL Fax +31 318-551395 • ITALY Fax +39 0422 321 470
GERMANY Fax +49 6441 781336 • FRANCE Fax +33 328 26 83 73 • SPAIN Fax +34 93 225 27 9
HOLLAND, GRUBBENVORST Fax +31 77-3663411 • LUXEMBOURG Fax +352 518151-820
HUNGARY Fax +36 1-254-0820 • POLAND Fax +48 22.857.90.26
CZECH REPUBLIC Fax: +42(0) 317 847338
Quality Parts & Service
©
V a n
G e s t e l
B & C
2 0 0 5
95
Notes
96
©
V a n
G e s t e l
B & C
2 0 0 5
DOWNLOAD OUR OTHER ANGLO PARTS
& ACCESSORIES CATALOGUES FOR FREE!
download the pdf versions of our catalogues for free
a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .
MGTC
part n° 190.275
4
Sprite-Midget 1958-’6
part n° 190.504
Triumph TR2-4A
part n° 190.243
Jaguar XK120-150
part n° 190.694
MGTD-TF
part n° 190.067
0
Sprite-Midget 1965-’8
part n° 190.518
Triumph TR5-250-6
part n° 190.273
V8
Jaguar MKII-Daimler
part n° 190.721
MGA
part n° 190.001
A.H. 100/4-3000
part n° 190.509
Mini 1969-2000
part n° 190.720
Triumph Spitfire
part n° 190.133
Jaguar E-type
part n° 190.695
MGC
part n° 190.158
MGB
part n° 190.002
MGF-TF 1996-2005
part n° 190.519
er 90-110
Land Rover Defend
1984-2006
part n° 190.779
Triumph GT6
part n° 190.863
Morris Minor
part n° 190.718
II, III
Jaguar XJ, Series I,
part n° 190.780
& Accessories
British Parts, Tools
part n° 190.058
© A n g l o P a r t s n v 2 0 1 5 Quality Parts & Service
MGC 1967-1969
PARTS & ACCESSORIES CATALOGUE
www.angloparts.com
please visit our website for all contact information
Anglo Parts Shops
MAIN BRANCH BELGIUM
HOLLAND • ITALY • GERMANY
Authorized Anglo Parts Dealers
FRANCE • HOLLAND • SPAIN
SWEDEN • FINLAND
CZECH REPUBLIC • SLOVAKIA
LUXEMBOURG • POLAND • HUNGARY
F o u r t h E d i t i o n • 1 9 0 . 1 5 8 Quality Parts & Service