Rogator 1084C/1286C

Rogator 1084C/1286C
Rogator 1084C/1286C
Serious Machinery
Rogator 1084C/1286C
Highest Capacity
Challenger RoGator 1084C
and 1286C ­provide the highest
spraying capacity. ­­
They are the largest, most
powerful and most productive
self propelled sprayers on the
market.
The challenger RoGator 1084C and 1286C are
designed and build to meet the demands from
large scale farmers and contractors.
The RoGator 1084C and 1286C offers
­exceptional strength and durability, together
with high performance that ensures optimum
output in all conditions.
Higher speed, better coverage
Weed, insects and crop diseases don’t wait
for the optimal spray conditions. They often
thrive when field conditions are at their worst.
You can’t afford to miss the spray opportunity.
Higher application speeds while spraying give
a different coverage of chemicals on the crop
comparison to spraying at lower speeds. ­­
The droplets are being thrown at higher
speeds at the crop, resulting in another ­
angle of impact into the crop. A better crop
coverage of the chemicals, and less ­chemical
on the soil. A better spraying result is a ­logical
consequence of using lower volumes, not
because of the reduced amount of water, but
the concentration and coverage are crucial
­factors of the spray result.
Rogator 1084C/1286C
Rogator 1084C/1286C
Engine
Fitted with powerful Caterpillar® Tier III
/ stage 3 A engines the machines have a
great capacity. The RoGator 1084C is fitted
with a CAT C7 engine and delivers 275 Hp
with a peak of 299 Hp and the RoGator
1286C is fitted with a CAT C9 engine and
delivers 311 Hp with a peak of 336 Hp, You
can be guaranteed excellent performance,
regardless of operating conditions. The powerful engines combine with the hydraustatic
drive line improves performance and reduces fuel consumption.
Transmission
The RoGator models are developed with the
tandem hydrostat cross-drive system. The
tandem hydrostat design drives the Sampo
radial piston wheel motors in an “X” pattern,
ensuring evenly distributed flow to the wheel
motors. This means when 1 tyre breaks traction, two others are still driving. When the
machine is driven through a corner, the out-
side wheels need more flow than the inside
wheels. The cross– drive system allows
this without power wasting. The 1084C has
a 4 speed hydrostatic and the 1286C has
a 6-speed hydrostatic transmission. This
gives always the maximum output in desired
speed range.
Suspension
Both RoGator models are fitted with Air
Spring suspension, with gas shocks on both
axles. This gives a very smooth ride and a
lot drivers comfort.
Chassis
The chassis of the RoGator is designed for
high speed operation with very heavy loads
in extreme conditions. The bolted “C” channel flex frame together with air suspension
to keep all four wheels in contact with the
ground. This gives maximum traction and
stability. The cab is placed in the center of the
machine. This gives optimal drivers comfort.
Rogator 1084C/1286C
Drivability
The RoGator models are simplicity itself to
operate. Gear selection is electro hydraulic
whilst engine speed is controlled electronically, either by use of a rocker switch control.
Forward speed and direction can be controlled by the convenient armrest– mounted
Joystick. The machine has a hydrostatic
dynamic braking system. The parking brake
in the front wheel engines are actuated via a
pedal in the cab.
Free clearance
The outstanding ground clearance of up to
122 cm on the 1286C and 127 cm on the
1084C RoGator models offer a tremendous
reduction in crop damage. The underside of
the RoGator has an extremely smooth profile.
With this clearance it’s possible to protect
your crops in a later grow stadium.
Adjustable track width
The front and rear axles are fitted with hydraulically adjusted track width. The track width of
the RoGator 1084C is 3.05 - 3.86 m and the
track width of the 1286C is 3.05 - 3.86 m. The
operator can change the track width on the
drive by a simple push of a button in the cab.
Rogator 1084C/1286C
Cab
Fitted with a newly designed, highly comfortable, suspended, panoramic, air conditioned
cab, you can be guaranteed of an excellent
level of operator comfort. The cabs have been
specially designed to create the safest possible working environment for operators. Each
cab is pressurised and fitted with a threelevel carbon filtering system to seal out dust,
chemicals and other contaminants.
The large glass area provides ultimate allround visibility. The modern analogue dials
integrated into the dashboard give you information such as speed, engine RPM, fuel,
temperature, oil pressure and a volt meter.
The VRS (Viration Reduction System) seat provides the operator with a quit and comfortable
workstation. The floating armrest allows the
operator to perform a number of functions.
In the cab there are a number of overhead
switches, cab lighting, standard climate control / heating and radio with cd/mp³ player.
FALCON VT controller
Falcon VT system functions are controlled
by the ultra modern terminal with a 25 cm
touchscreen colour monitor. The spray controller controls constantly the application
rates and monitors the liters per ha, the
spray pressure, total sprayed volumes and
area covered, speed and tank volume. The
controller is also lower case equipped with
SD-Datacard slot for data transfer.
Rogator 1084C/1286C
Wide versatility
Spray tank
Airmax spreader
RoGator sprayers are equipped with a durable
stainless steel spray tank. The tank of the
1084C is 4088 litre and the tank of the 1286C
is 4770 litre. The tank is easy to clean. A
sparger tube runs the entire length of the tank
to keep chemicals properly mixed.
The RoGator 1286C can also be fit with a
Airmax spreader. This is a pneumatic fertiliser spreader and has a working width of 18
m. The fertiliser is distributed via deflectors,
with triple overlap for optimal spreading.
There are two nozzles mounted on one
air pipe. The robust spreader construction
guarantees a durable spreader. The dosing
procedure is controlled by the Falcon VT terminal. This enables you to adjust the dosage
very accurately.
Steel booms
Booms up to 36.5 m are available for the
RoGator 1084C and 1286C. Steel booms
are exceptionally rigid and stable with full
breakaway. This feature extends boom life
and improves machine reliability.
New Leader spreader
The RoGator 1084C and 1286C can be
equipped with a new leader disc spreader.
This fertiliser spreader with continuous disc
speed adjustment can be adjusted perfectly to
the composition of the product. The working
width is up to 36 m. The disc spreader is extremely flexible and has a very highly effective
output. It is available in various versions for
spreading mineral fertiliser and lime.
Auto-Guide steering system
The Auto-Guide System is a fully automatic
steering system which steers the RoGator
precisely along virtual track lines in the field.
Independent of traditional track indication
systems, Auto-Guide enables equipment of
various working widths to be operated so that
their operating ranges connect up with each
other exactly. This means that connecting
work cycles can even be carried out in dark
conditions or with poor visibility. Overlaps or
non-treated sections are a thing of the past.
High savings on fuel, chemicals and fertiliser
can be achieved, resulting in increased profitability and productivity.
Rogator 1084C/1286C
Specifications RoGator 1084C RoGator 1286C
ENGINE Caterpillar C7 7.2 ltr. Tier III 275 HP (205 KW) 299 HP (222 KW) 1324 NM (1400 rpm) 492 ltr. Caterpillar C9 8.8 ltr. Tier III
311 HP (231 KW)
336 HP (250 KW)
1500 Nm (1400 rpm)
492 ltr.
Type Engine power
Max. power Max. Torque Fuel capacity TRANSMISSION Type Bosch Rexroth Hydrostatic Speed Ranges 4 Ranges Range 1st-km/h 22.5 2nd-km/h 29 3rd-km/h 38.5 4th-km/h 53 5th-km/h 6th-km/h CAB Sauer Danfoss Hydrostatic
6 Ranges
21
24
27
34
40
58
Suspension Filtering Seat Air-conditioning Three-point rubber isolation mounted
Three stage air filtering, meets ASAE 525 standards
Air-suspended seat (option VRS seat)
Automatic Temperature Control
TYRES Front / Rear 380/90R46 (option 24.5R32) 380/90R46 (option 24.5R32)
DIMENSIONS Outside width – m Overall chassis lenght Wheel base -m Turning Circle -m Ground Clearance -cm Track Width-m Suspension 3.05 7.29 4.68 8.23 1.27 3.05 - 3.86 air springs 3.05
7.42
4.68
8.23
1.22
3.05 - 3.86
air springs
Spray tank capacity -L Fresh water tank capacity –L Spray pump capacity from Spraying width 4088 416 38-454 L/min up to 36 m 4770
416
37-725 L/min
up to 36 m
SPRAY PACK COMBO OPTIONS Spreaders New Leader disc spreader OPTIONAL
- Field Hal or Hid lights - Foam marker - Air ride (1084) - Parallel Navigation System Challenger is a premium global
agricultural equipment brand that focuses
on the professional and commercial
producer whose outputs represents 75%
of the world’s commodity production.
The Challenger brand includes tracked
tractors, wheeled tractors, combine
harvesters, self propelled sprayers, self
propelled spreaders, windrowers and
balers. Built to Challenger standards, the
highest levels of engineering excellence
in the world, these machines provide a
better return on your investment.
Terra-Gator 3 - 4 wheel models,
western European RoGator models
and Spra-Coupe machines built at the
factory in Grubbenvorst. These machines
represent the top of the range in the
sprayer and spreader market. With a
practically endless range of models and
accessories, each of these premium
machines is built to the specific needs of
the customer.
Visit the Challenger Site: www.challenger-ag.com or for
Challenger Merchandise: www.challengerstore.com
New Leader disc spreader
Airmax 180 pneumatic spreader
- VRS (Vibration Reduction System) seat - Autoboom - Toolboxes
- Auto-Guide
Cat®, Caterpillar® and Challenger® are registered trademarks
of Caterpillar Inc. and are used under licence by AGCO Corporation©
AGCO Limited 2008 I 14663/0808 I English